* [PATCH] ARM: tegra: nyan: Enable GPU node and related supply @ 2016-09-18 14:13 ` Paul Kocialkowski 0 siblings, 0 replies; 20+ messages in thread From: Paul Kocialkowski @ 2016-09-18 14:13 UTC (permalink / raw) To: linux-kernel-u79uwXL29TY76Z2rM5mHXA Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, Alexandre Courbot, Thierry Reding, Stephen Warren, Paul Kocialkowski This enables the GPU node for tegra124 nyan boards, which is required to get graphics acceleration with nouveau on these devices. Signed-off-by: Paul Kocialkowski <contact-W9ppeneeCTY@public.gmane.org> --- arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index dab9509..225ca77 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -42,6 +42,12 @@ }; }; + gpu@0,57000000 { + status = "okay"; + + vdd-supply = <&vdd_gpu>; + }; + serial@70006000 { /* Debug connector on the bottom of the board near SD card. */ status = "okay"; @@ -214,7 +220,7 @@ regulator-always-on; }; - sd6 { + vdd_gpu: sd6 { regulator-name = "+VDD_GPU_AP"; regulator-min-microvolt = <650000>; regulator-max-microvolt = <1200000>; -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH] ARM: tegra: nyan: Enable GPU node and related supply @ 2016-09-18 14:13 ` Paul Kocialkowski 0 siblings, 0 replies; 20+ messages in thread From: Paul Kocialkowski @ 2016-09-18 14:13 UTC (permalink / raw) To: linux-arm-kernel This enables the GPU node for tegra124 nyan boards, which is required to get graphics acceleration with nouveau on these devices. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> --- arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index dab9509..225ca77 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -42,6 +42,12 @@ }; }; + gpu at 0,57000000 { + status = "okay"; + + vdd-supply = <&vdd_gpu>; + }; + serial at 70006000 { /* Debug connector on the bottom of the board near SD card. */ status = "okay"; @@ -214,7 +220,7 @@ regulator-always-on; }; - sd6 { + vdd_gpu: sd6 { regulator-name = "+VDD_GPU_AP"; regulator-min-microvolt = <650000>; regulator-max-microvolt = <1200000>; -- 2.9.3 ^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH] ARM: tegra: nyan: Enable GPU node and related supply @ 2016-09-18 14:13 ` Paul Kocialkowski 0 siblings, 0 replies; 20+ messages in thread From: Paul Kocialkowski @ 2016-09-18 14:13 UTC (permalink / raw) To: linux-kernel Cc: linux-tegra, linux-arm-kernel, devicetree, Alexandre Courbot, Thierry Reding, Stephen Warren, Paul Kocialkowski This enables the GPU node for tegra124 nyan boards, which is required to get graphics acceleration with nouveau on these devices. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> --- arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index dab9509..225ca77 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -42,6 +42,12 @@ }; }; + gpu@0,57000000 { + status = "okay"; + + vdd-supply = <&vdd_gpu>; + }; + serial@70006000 { /* Debug connector on the bottom of the board near SD card. */ status = "okay"; @@ -214,7 +220,7 @@ regulator-always-on; }; - sd6 { + vdd_gpu: sd6 { regulator-name = "+VDD_GPU_AP"; regulator-min-microvolt = <650000>; regulator-max-microvolt = <1200000>; -- 2.9.3 ^ permalink raw reply related [flat|nested] 20+ messages in thread
[parent not found: <20160918141311.17140-1-contact-W9ppeneeCTY@public.gmane.org>]
* Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply 2016-09-18 14:13 ` Paul Kocialkowski (?) @ 2016-09-20 12:24 ` Jon Hunter -1 siblings, 0 replies; 20+ messages in thread From: Jon Hunter @ 2016-09-20 12:24 UTC (permalink / raw) To: Paul Kocialkowski, linux-kernel-u79uwXL29TY76Z2rM5mHXA, Alexandre Courbot, Thierry Reding Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, Stephen Warren On 18/09/16 15:13, Paul Kocialkowski wrote: > This enables the GPU node for tegra124 nyan boards, which is required to > get graphics acceleration with nouveau on these devices. > > Signed-off-by: Paul Kocialkowski <contact-W9ppeneeCTY@public.gmane.org> > --- > arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi > index dab9509..225ca77 100644 > --- a/arch/arm/boot/dts/tegra124-nyan.dtsi > +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi > @@ -42,6 +42,12 @@ > }; > }; > > + gpu@0,57000000 { > + status = "okay"; > + > + vdd-supply = <&vdd_gpu>; > + }; > + > serial@70006000 { > /* Debug connector on the bottom of the board near SD card. */ > status = "okay"; > @@ -214,7 +220,7 @@ > regulator-always-on; > }; > > - sd6 { > + vdd_gpu: sd6 { > regulator-name = "+VDD_GPU_AP"; > regulator-min-microvolt = <650000>; > regulator-max-microvolt = <1200000>; > Looks good to me. I see the following error when booting but looking at the code appears to be benign. Thierry, Alex, is this normal/okay? [ 5.715181] nouveau 57000000.gpu: NVIDIA GK20A (0ea000a1) [ 5.720625] nouveau 57000000.gpu: imem: using IOMMU [ 5.803694] nouveau 57000000.gpu: DRM: VRAM: 0 MiB [ 5.808501] nouveau 57000000.gpu: DRM: GART: 1048576 MiB [ 5.816000] nouveau 57000000.gpu: DRM: failed to create ce channel, -22 [ 5.924140] nouveau 57000000.gpu: DRM: MM: using GRCE for buffer copies Cheers Jon -- nvpublic -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH] ARM: tegra: nyan: Enable GPU node and related supply @ 2016-09-20 12:24 ` Jon Hunter 0 siblings, 0 replies; 20+ messages in thread From: Jon Hunter @ 2016-09-20 12:24 UTC (permalink / raw) To: linux-arm-kernel On 18/09/16 15:13, Paul Kocialkowski wrote: > This enables the GPU node for tegra124 nyan boards, which is required to > get graphics acceleration with nouveau on these devices. > > Signed-off-by: Paul Kocialkowski <contact@paulk.fr> > --- > arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi > index dab9509..225ca77 100644 > --- a/arch/arm/boot/dts/tegra124-nyan.dtsi > +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi > @@ -42,6 +42,12 @@ > }; > }; > > + gpu at 0,57000000 { > + status = "okay"; > + > + vdd-supply = <&vdd_gpu>; > + }; > + > serial at 70006000 { > /* Debug connector on the bottom of the board near SD card. */ > status = "okay"; > @@ -214,7 +220,7 @@ > regulator-always-on; > }; > > - sd6 { > + vdd_gpu: sd6 { > regulator-name = "+VDD_GPU_AP"; > regulator-min-microvolt = <650000>; > regulator-max-microvolt = <1200000>; > Looks good to me. I see the following error when booting but looking at the code appears to be benign. Thierry, Alex, is this normal/okay? [ 5.715181] nouveau 57000000.gpu: NVIDIA GK20A (0ea000a1) [ 5.720625] nouveau 57000000.gpu: imem: using IOMMU [ 5.803694] nouveau 57000000.gpu: DRM: VRAM: 0 MiB [ 5.808501] nouveau 57000000.gpu: DRM: GART: 1048576 MiB [ 5.816000] nouveau 57000000.gpu: DRM: failed to create ce channel, -22 [ 5.924140] nouveau 57000000.gpu: DRM: MM: using GRCE for buffer copies Cheers Jon -- nvpublic ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply @ 2016-09-20 12:24 ` Jon Hunter 0 siblings, 0 replies; 20+ messages in thread From: Jon Hunter @ 2016-09-20 12:24 UTC (permalink / raw) To: Paul Kocialkowski, linux-kernel, Alexandre Courbot, Thierry Reding Cc: linux-tegra, linux-arm-kernel, devicetree, Stephen Warren On 18/09/16 15:13, Paul Kocialkowski wrote: > This enables the GPU node for tegra124 nyan boards, which is required to > get graphics acceleration with nouveau on these devices. > > Signed-off-by: Paul Kocialkowski <contact@paulk.fr> > --- > arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi > index dab9509..225ca77 100644 > --- a/arch/arm/boot/dts/tegra124-nyan.dtsi > +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi > @@ -42,6 +42,12 @@ > }; > }; > > + gpu@0,57000000 { > + status = "okay"; > + > + vdd-supply = <&vdd_gpu>; > + }; > + > serial@70006000 { > /* Debug connector on the bottom of the board near SD card. */ > status = "okay"; > @@ -214,7 +220,7 @@ > regulator-always-on; > }; > > - sd6 { > + vdd_gpu: sd6 { > regulator-name = "+VDD_GPU_AP"; > regulator-min-microvolt = <650000>; > regulator-max-microvolt = <1200000>; > Looks good to me. I see the following error when booting but looking at the code appears to be benign. Thierry, Alex, is this normal/okay? [ 5.715181] nouveau 57000000.gpu: NVIDIA GK20A (0ea000a1) [ 5.720625] nouveau 57000000.gpu: imem: using IOMMU [ 5.803694] nouveau 57000000.gpu: DRM: VRAM: 0 MiB [ 5.808501] nouveau 57000000.gpu: DRM: GART: 1048576 MiB [ 5.816000] nouveau 57000000.gpu: DRM: failed to create ce channel, -22 [ 5.924140] nouveau 57000000.gpu: DRM: MM: using GRCE for buffer copies Cheers Jon -- nvpublic ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply 2016-09-20 12:24 ` Jon Hunter @ 2016-09-20 18:17 ` Paul Kocialkowski -1 siblings, 0 replies; 20+ messages in thread From: Paul Kocialkowski @ 2016-09-20 18:17 UTC (permalink / raw) To: Jon Hunter, linux-kernel, Alexandre Courbot, Thierry Reding Cc: linux-tegra, linux-arm-kernel, devicetree, Stephen Warren [-- Attachment #1: Type: text/plain, Size: 3055 bytes --] Le mardi 20 septembre 2016 à 13:24 +0100, Jon Hunter a écrit : > On 18/09/16 15:13, Paul Kocialkowski wrote: > > > > This enables the GPU node for tegra124 nyan boards, which is required to > > get graphics acceleration with nouveau on these devices. > > > > Signed-off-by: Paul Kocialkowski <contact@paulk.fr> > > --- > > arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- > > 1 file changed, 7 insertions(+), 1 deletion(-) > > > > diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi > > b/arch/arm/boot/dts/tegra124-nyan.dtsi > > index dab9509..225ca77 100644 > > --- a/arch/arm/boot/dts/tegra124-nyan.dtsi > > +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi > > @@ -42,6 +42,12 @@ > > }; > > }; > > > > + gpu@0,57000000 { > > + status = "okay"; > > + > > + vdd-supply = <&vdd_gpu>; > > + }; > > + > > serial@70006000 { > > /* Debug connector on the bottom of the board near SD card. > > */ > > status = "okay"; > > @@ -214,7 +220,7 @@ > > regulator-always-on; > > }; > > > > - sd6 { > > + vdd_gpu: sd6 { > > regulator-name = "+VDD_GPU_AP"; > > regulator-min-microvolt = <650000>; > > regulator-max-microvolt = > > <1200000>; > > > > Looks good to me. I see the following error when booting but looking at the > code appears to be benign. Thierry, Alex, is this normal/okay? I have the same messages and asked Alexandre about them the other day. He told me that it looks normal. > [ 5.715181] nouveau 57000000.gpu: NVIDIA GK20A > (0ea000a1) > > [ 5.720625] nouveau 57000000.gpu: imem: using > IOMMU > > [ 5.803694] nouveau 57000000.gpu: DRM: VRAM: 0 > MiB > > [ 5.808501] nouveau 57000000.gpu: DRM: GART: 1048576 > MiB > > [ 5.816000] nouveau 57000000.gpu: DRM: failed to create ce channel, > -22 > > [ 5.924140] nouveau 57000000.gpu: DRM: MM: using GRCE for buffer copies > > Cheers > Jon > -- Paul Kocialkowski, developer of low-level free software for embedded devices Website: https://www.paulk.fr/ Coding blog: https://code.paulk.fr/ Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/ [-- Attachment #2: This is a digitally signed message part --] [-- Type: application/pgp-signature, Size: 801 bytes --] ^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH] ARM: tegra: nyan: Enable GPU node and related supply @ 2016-09-20 18:17 ` Paul Kocialkowski 0 siblings, 0 replies; 20+ messages in thread From: Paul Kocialkowski @ 2016-09-20 18:17 UTC (permalink / raw) To: linux-arm-kernel Le mardi 20 septembre 2016 ? 13:24 +0100, Jon Hunter a ?crit?: > On 18/09/16 15:13, Paul Kocialkowski wrote: > > > > This enables the GPU node for tegra124 nyan boards, which is required to > > get graphics acceleration with nouveau on these devices. > > > > Signed-off-by: Paul Kocialkowski <contact@paulk.fr> > > --- > > ?arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- > > ?1 file changed, 7 insertions(+), 1 deletion(-) > > > > diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi > > b/arch/arm/boot/dts/tegra124-nyan.dtsi > > index dab9509..225ca77 100644 > > --- a/arch/arm/boot/dts/tegra124-nyan.dtsi > > +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi > > @@ -42,6 +42,12 @@ > > ? }; > > ? }; > > ? > > + gpu at 0,57000000 { > > + status = "okay"; > > + > > + vdd-supply = <&vdd_gpu>; > > + }; > > + > > ? serial at 70006000 { > > ? /* Debug connector on the bottom of the board near SD card. > > */ > > ? status = "okay"; > > @@ -214,7 +220,7 @@ > > ? regulator-always-on; > > ? }; > > ? > > - sd6 { > > + vdd_gpu: sd6 { > > ? regulator-name = "+VDD_GPU_AP"; > > ? regulator-min-microvolt = <650000>; > > ? regulator-max-microvolt = > > <1200000>; > > > > Looks good to me. I see the following error when booting but looking at the > code appears to be benign. Thierry, Alex, is this normal/okay? I have the same messages and asked?Alexandre about them the other day. He told me that it looks normal. > [????5.715181] nouveau 57000000.gpu: NVIDIA GK20A > (0ea000a1)???????????????????????????????????????????????????????????????????? > ???????????????????????? > [????5.720625] nouveau 57000000.gpu: imem: using > IOMMU????????????????????????????????????????????????????????????????????????? > ????????????????????????? > [????5.803694] nouveau 57000000.gpu: DRM: VRAM: 0 > MiB??????????????????????????????????????????????????????????????????????????? > ???????????????????????? > [????5.808501] nouveau 57000000.gpu: DRM: GART: 1048576 > MiB??????????????????????????????????????????????????????????????????????????? > ?????????????????? > [????5.816000] nouveau 57000000.gpu: DRM: failed to create ce channel, > -22??????????????????????????????????????????????????????????????????????????? > ??? > [????5.924140] nouveau 57000000.gpu: DRM: MM: using GRCE for buffer copies?? > > Cheers > Jon > -- Paul Kocialkowski, developer of low-level free software for embedded devices Website: https://www.paulk.fr/ Coding blog: https://code.paulk.fr/ Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/ -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: This is a digitally signed message part URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160920/8b5aba3b/attachment-0001.sig> ^ permalink raw reply [flat|nested] 20+ messages in thread
[parent not found: <1474395433.1215.23.camel-W9ppeneeCTY@public.gmane.org>]
* Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply 2016-09-20 18:17 ` Paul Kocialkowski (?) @ 2016-09-21 7:57 ` Jon Hunter -1 siblings, 0 replies; 20+ messages in thread From: Jon Hunter @ 2016-09-21 7:57 UTC (permalink / raw) To: Paul Kocialkowski, linux-kernel-u79uwXL29TY76Z2rM5mHXA, Alexandre Courbot, Thierry Reding Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, Stephen Warren On 20/09/16 19:17, Paul Kocialkowski wrote: > * PGP Signed by an unknown key > > Le mardi 20 septembre 2016 à 13:24 +0100, Jon Hunter a écrit : >> On 18/09/16 15:13, Paul Kocialkowski wrote: >>> >>> This enables the GPU node for tegra124 nyan boards, which is required to >>> get graphics acceleration with nouveau on these devices. >>> >>> Signed-off-by: Paul Kocialkowski <contact-W9ppeneeCTY@public.gmane.org> >>> --- >>> arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- >>> 1 file changed, 7 insertions(+), 1 deletion(-) >>> >>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi >>> b/arch/arm/boot/dts/tegra124-nyan.dtsi >>> index dab9509..225ca77 100644 >>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi >>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi >>> @@ -42,6 +42,12 @@ >>> }; >>> }; >>> >>> + gpu@0,57000000 { >>> + status = "okay"; >>> + >>> + vdd-supply = <&vdd_gpu>; >>> + }; >>> + >>> serial@70006000 { >>> /* Debug connector on the bottom of the board near SD card. >>> */ >>> status = "okay"; >>> @@ -214,7 +220,7 @@ >>> regulator-always-on; >>> }; >>> >>> - sd6 { >>> + vdd_gpu: sd6 { >>> regulator-name = "+VDD_GPU_AP"; >>> regulator-min-microvolt = <650000>; >>> regulator-max-microvolt = >>> <1200000>; >>> >> >> Looks good to me. I see the following error when booting but looking at the >> code appears to be benign. Thierry, Alex, is this normal/okay? > > I have the same messages and asked Alexandre about them the other day. He told > me that it looks normal. Ok great. Hopefully, Alex can ACK then. Cheers Jon -- nvpublic ^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH] ARM: tegra: nyan: Enable GPU node and related supply @ 2016-09-21 7:57 ` Jon Hunter 0 siblings, 0 replies; 20+ messages in thread From: Jon Hunter @ 2016-09-21 7:57 UTC (permalink / raw) To: linux-arm-kernel On 20/09/16 19:17, Paul Kocialkowski wrote: > * PGP Signed by an unknown key > > Le mardi 20 septembre 2016 ? 13:24 +0100, Jon Hunter a ?crit : >> On 18/09/16 15:13, Paul Kocialkowski wrote: >>> >>> This enables the GPU node for tegra124 nyan boards, which is required to >>> get graphics acceleration with nouveau on these devices. >>> >>> Signed-off-by: Paul Kocialkowski <contact@paulk.fr> >>> --- >>> arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- >>> 1 file changed, 7 insertions(+), 1 deletion(-) >>> >>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi >>> b/arch/arm/boot/dts/tegra124-nyan.dtsi >>> index dab9509..225ca77 100644 >>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi >>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi >>> @@ -42,6 +42,12 @@ >>> }; >>> }; >>> >>> + gpu at 0,57000000 { >>> + status = "okay"; >>> + >>> + vdd-supply = <&vdd_gpu>; >>> + }; >>> + >>> serial at 70006000 { >>> /* Debug connector on the bottom of the board near SD card. >>> */ >>> status = "okay"; >>> @@ -214,7 +220,7 @@ >>> regulator-always-on; >>> }; >>> >>> - sd6 { >>> + vdd_gpu: sd6 { >>> regulator-name = "+VDD_GPU_AP"; >>> regulator-min-microvolt = <650000>; >>> regulator-max-microvolt = >>> <1200000>; >>> >> >> Looks good to me. I see the following error when booting but looking at the >> code appears to be benign. Thierry, Alex, is this normal/okay? > > I have the same messages and asked Alexandre about them the other day. He told > me that it looks normal. Ok great. Hopefully, Alex can ACK then. Cheers Jon -- nvpublic ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply @ 2016-09-21 7:57 ` Jon Hunter 0 siblings, 0 replies; 20+ messages in thread From: Jon Hunter @ 2016-09-21 7:57 UTC (permalink / raw) To: Paul Kocialkowski, linux-kernel, Alexandre Courbot, Thierry Reding Cc: linux-tegra, linux-arm-kernel, devicetree, Stephen Warren On 20/09/16 19:17, Paul Kocialkowski wrote: > * PGP Signed by an unknown key > > Le mardi 20 septembre 2016 à 13:24 +0100, Jon Hunter a écrit : >> On 18/09/16 15:13, Paul Kocialkowski wrote: >>> >>> This enables the GPU node for tegra124 nyan boards, which is required to >>> get graphics acceleration with nouveau on these devices. >>> >>> Signed-off-by: Paul Kocialkowski <contact@paulk.fr> >>> --- >>> arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- >>> 1 file changed, 7 insertions(+), 1 deletion(-) >>> >>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi >>> b/arch/arm/boot/dts/tegra124-nyan.dtsi >>> index dab9509..225ca77 100644 >>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi >>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi >>> @@ -42,6 +42,12 @@ >>> }; >>> }; >>> >>> + gpu@0,57000000 { >>> + status = "okay"; >>> + >>> + vdd-supply = <&vdd_gpu>; >>> + }; >>> + >>> serial@70006000 { >>> /* Debug connector on the bottom of the board near SD card. >>> */ >>> status = "okay"; >>> @@ -214,7 +220,7 @@ >>> regulator-always-on; >>> }; >>> >>> - sd6 { >>> + vdd_gpu: sd6 { >>> regulator-name = "+VDD_GPU_AP"; >>> regulator-min-microvolt = <650000>; >>> regulator-max-microvolt = >>> <1200000>; >>> >> >> Looks good to me. I see the following error when booting but looking at the >> code appears to be benign. Thierry, Alex, is this normal/okay? > > I have the same messages and asked Alexandre about them the other day. He told > me that it looks normal. Ok great. Hopefully, Alex can ACK then. Cheers Jon -- nvpublic ^ permalink raw reply [flat|nested] 20+ messages in thread
[parent not found: <e95335ae-ad19-b8cd-634b-63c6a0b88e01-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>]
* Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply 2016-09-21 7:57 ` Jon Hunter (?) @ 2016-11-07 12:51 ` Alexandre Courbot -1 siblings, 0 replies; 20+ messages in thread From: Alexandre Courbot @ 2016-11-07 12:51 UTC (permalink / raw) To: Jon Hunter Cc: Paul Kocialkowski, Linux Kernel Mailing List, Thierry Reding, linux-tegra-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, Stephen Warren On Wed, Sep 21, 2016 at 4:57 PM, Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> wrote: > > On 20/09/16 19:17, Paul Kocialkowski wrote: >> * PGP Signed by an unknown key >> >> Le mardi 20 septembre 2016 à 13:24 +0100, Jon Hunter a écrit : >>> On 18/09/16 15:13, Paul Kocialkowski wrote: >>>> >>>> This enables the GPU node for tegra124 nyan boards, which is required to >>>> get graphics acceleration with nouveau on these devices. >>>> >>>> Signed-off-by: Paul Kocialkowski <contact-W9ppeneeCTY@public.gmane.org> >>>> --- >>>> arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- >>>> 1 file changed, 7 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi >>>> b/arch/arm/boot/dts/tegra124-nyan.dtsi >>>> index dab9509..225ca77 100644 >>>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi >>>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi >>>> @@ -42,6 +42,12 @@ >>>> }; >>>> }; >>>> >>>> + gpu@0,57000000 { >>>> + status = "okay"; >>>> + >>>> + vdd-supply = <&vdd_gpu>; >>>> + }; >>>> + >>>> serial@70006000 { >>>> /* Debug connector on the bottom of the board near SD card. >>>> */ >>>> status = "okay"; >>>> @@ -214,7 +220,7 @@ >>>> regulator-always-on; >>>> }; >>>> >>>> - sd6 { >>>> + vdd_gpu: sd6 { >>>> regulator-name = "+VDD_GPU_AP"; >>>> regulator-min-microvolt = <650000>; >>>> regulator-max-microvolt = >>>> <1200000>; >>>> >>> >>> Looks good to me. I see the following error when booting but looking at the >>> code appears to be benign. Thierry, Alex, is this normal/okay? >> >> I have the same messages and asked Alexandre about them the other day. He told >> me that it looks normal. > > Ok great. Hopefully, Alex can ACK then. Apologies for the (very) delayed reply. Yes, the messages you are seeing are part of the normal probe sequence on Tegra. So this looks good to me. Acked-by: Alexandre Courbot <acourbot-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH] ARM: tegra: nyan: Enable GPU node and related supply @ 2016-11-07 12:51 ` Alexandre Courbot 0 siblings, 0 replies; 20+ messages in thread From: Alexandre Courbot @ 2016-11-07 12:51 UTC (permalink / raw) To: linux-arm-kernel On Wed, Sep 21, 2016 at 4:57 PM, Jon Hunter <jonathanh@nvidia.com> wrote: > > On 20/09/16 19:17, Paul Kocialkowski wrote: >> * PGP Signed by an unknown key >> >> Le mardi 20 septembre 2016 ? 13:24 +0100, Jon Hunter a ?crit : >>> On 18/09/16 15:13, Paul Kocialkowski wrote: >>>> >>>> This enables the GPU node for tegra124 nyan boards, which is required to >>>> get graphics acceleration with nouveau on these devices. >>>> >>>> Signed-off-by: Paul Kocialkowski <contact@paulk.fr> >>>> --- >>>> arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- >>>> 1 file changed, 7 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi >>>> b/arch/arm/boot/dts/tegra124-nyan.dtsi >>>> index dab9509..225ca77 100644 >>>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi >>>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi >>>> @@ -42,6 +42,12 @@ >>>> }; >>>> }; >>>> >>>> + gpu at 0,57000000 { >>>> + status = "okay"; >>>> + >>>> + vdd-supply = <&vdd_gpu>; >>>> + }; >>>> + >>>> serial at 70006000 { >>>> /* Debug connector on the bottom of the board near SD card. >>>> */ >>>> status = "okay"; >>>> @@ -214,7 +220,7 @@ >>>> regulator-always-on; >>>> }; >>>> >>>> - sd6 { >>>> + vdd_gpu: sd6 { >>>> regulator-name = "+VDD_GPU_AP"; >>>> regulator-min-microvolt = <650000>; >>>> regulator-max-microvolt = >>>> <1200000>; >>>> >>> >>> Looks good to me. I see the following error when booting but looking at the >>> code appears to be benign. Thierry, Alex, is this normal/okay? >> >> I have the same messages and asked Alexandre about them the other day. He told >> me that it looks normal. > > Ok great. Hopefully, Alex can ACK then. Apologies for the (very) delayed reply. Yes, the messages you are seeing are part of the normal probe sequence on Tegra. So this looks good to me. Acked-by: Alexandre Courbot <acourbot@nvidia.com> ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply @ 2016-11-07 12:51 ` Alexandre Courbot 0 siblings, 0 replies; 20+ messages in thread From: Alexandre Courbot @ 2016-11-07 12:51 UTC (permalink / raw) To: Jon Hunter Cc: Paul Kocialkowski, Linux Kernel Mailing List, Thierry Reding, linux-tegra, linux-arm-kernel, devicetree, Stephen Warren On Wed, Sep 21, 2016 at 4:57 PM, Jon Hunter <jonathanh@nvidia.com> wrote: > > On 20/09/16 19:17, Paul Kocialkowski wrote: >> * PGP Signed by an unknown key >> >> Le mardi 20 septembre 2016 à 13:24 +0100, Jon Hunter a écrit : >>> On 18/09/16 15:13, Paul Kocialkowski wrote: >>>> >>>> This enables the GPU node for tegra124 nyan boards, which is required to >>>> get graphics acceleration with nouveau on these devices. >>>> >>>> Signed-off-by: Paul Kocialkowski <contact@paulk.fr> >>>> --- >>>> arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- >>>> 1 file changed, 7 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi >>>> b/arch/arm/boot/dts/tegra124-nyan.dtsi >>>> index dab9509..225ca77 100644 >>>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi >>>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi >>>> @@ -42,6 +42,12 @@ >>>> }; >>>> }; >>>> >>>> + gpu@0,57000000 { >>>> + status = "okay"; >>>> + >>>> + vdd-supply = <&vdd_gpu>; >>>> + }; >>>> + >>>> serial@70006000 { >>>> /* Debug connector on the bottom of the board near SD card. >>>> */ >>>> status = "okay"; >>>> @@ -214,7 +220,7 @@ >>>> regulator-always-on; >>>> }; >>>> >>>> - sd6 { >>>> + vdd_gpu: sd6 { >>>> regulator-name = "+VDD_GPU_AP"; >>>> regulator-min-microvolt = <650000>; >>>> regulator-max-microvolt = >>>> <1200000>; >>>> >>> >>> Looks good to me. I see the following error when booting but looking at the >>> code appears to be benign. Thierry, Alex, is this normal/okay? >> >> I have the same messages and asked Alexandre about them the other day. He told >> me that it looks normal. > > Ok great. Hopefully, Alex can ACK then. Apologies for the (very) delayed reply. Yes, the messages you are seeing are part of the normal probe sequence on Tegra. So this looks good to me. Acked-by: Alexandre Courbot <acourbot@nvidia.com> ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply 2016-11-07 12:51 ` Alexandre Courbot (?) @ 2016-11-07 13:00 ` Jon Hunter -1 siblings, 0 replies; 20+ messages in thread From: Jon Hunter @ 2016-11-07 13:00 UTC (permalink / raw) To: Alexandre Courbot, Thierry Reding Cc: Paul Kocialkowski, Linux Kernel Mailing List, linux-tegra, linux-arm-kernel, devicetree, Stephen Warren Thierry, On 07/11/16 12:51, Alexandre Courbot wrote: > On Wed, Sep 21, 2016 at 4:57 PM, Jon Hunter <jonathanh@nvidia.com> wrote: >> >> On 20/09/16 19:17, Paul Kocialkowski wrote: >>> * PGP Signed by an unknown key >>> >>> Le mardi 20 septembre 2016 à 13:24 +0100, Jon Hunter a écrit : >>>> On 18/09/16 15:13, Paul Kocialkowski wrote: >>>>> >>>>> This enables the GPU node for tegra124 nyan boards, which is required to >>>>> get graphics acceleration with nouveau on these devices. >>>>> >>>>> Signed-off-by: Paul Kocialkowski <contact@paulk.fr> >>>>> --- >>>>> arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- >>>>> 1 file changed, 7 insertions(+), 1 deletion(-) >>>>> >>>>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi >>>>> b/arch/arm/boot/dts/tegra124-nyan.dtsi >>>>> index dab9509..225ca77 100644 >>>>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi >>>>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi >>>>> @@ -42,6 +42,12 @@ >>>>> }; >>>>> }; >>>>> >>>>> + gpu@0,57000000 { >>>>> + status = "okay"; >>>>> + >>>>> + vdd-supply = <&vdd_gpu>; >>>>> + }; >>>>> + >>>>> serial@70006000 { >>>>> /* Debug connector on the bottom of the board near SD card. >>>>> */ >>>>> status = "okay"; >>>>> @@ -214,7 +220,7 @@ >>>>> regulator-always-on; >>>>> }; >>>>> >>>>> - sd6 { >>>>> + vdd_gpu: sd6 { >>>>> regulator-name = "+VDD_GPU_AP"; >>>>> regulator-min-microvolt = <650000>; >>>>> regulator-max-microvolt = >>>>> <1200000>; >>>>> >>>> >>>> Looks good to me. I see the following error when booting but looking at the >>>> code appears to be benign. Thierry, Alex, is this normal/okay? >>> >>> I have the same messages and asked Alexandre about them the other day. He told >>> me that it looks normal. >> >> Ok great. Hopefully, Alex can ACK then. > > Apologies for the (very) delayed reply. > > Yes, the messages you are seeing are part of the normal probe sequence > on Tegra. So this looks good to me. > > Acked-by: Alexandre Courbot <acourbot@nvidia.com> Can you pick this one up for v4.10 as well? Cheers Jon -- nvpublic ^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH] ARM: tegra: nyan: Enable GPU node and related supply @ 2016-11-07 13:00 ` Jon Hunter 0 siblings, 0 replies; 20+ messages in thread From: Jon Hunter @ 2016-11-07 13:00 UTC (permalink / raw) To: linux-arm-kernel Thierry, On 07/11/16 12:51, Alexandre Courbot wrote: > On Wed, Sep 21, 2016 at 4:57 PM, Jon Hunter <jonathanh@nvidia.com> wrote: >> >> On 20/09/16 19:17, Paul Kocialkowski wrote: >>> * PGP Signed by an unknown key >>> >>> Le mardi 20 septembre 2016 ? 13:24 +0100, Jon Hunter a ?crit : >>>> On 18/09/16 15:13, Paul Kocialkowski wrote: >>>>> >>>>> This enables the GPU node for tegra124 nyan boards, which is required to >>>>> get graphics acceleration with nouveau on these devices. >>>>> >>>>> Signed-off-by: Paul Kocialkowski <contact@paulk.fr> >>>>> --- >>>>> arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- >>>>> 1 file changed, 7 insertions(+), 1 deletion(-) >>>>> >>>>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi >>>>> b/arch/arm/boot/dts/tegra124-nyan.dtsi >>>>> index dab9509..225ca77 100644 >>>>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi >>>>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi >>>>> @@ -42,6 +42,12 @@ >>>>> }; >>>>> }; >>>>> >>>>> + gpu at 0,57000000 { >>>>> + status = "okay"; >>>>> + >>>>> + vdd-supply = <&vdd_gpu>; >>>>> + }; >>>>> + >>>>> serial at 70006000 { >>>>> /* Debug connector on the bottom of the board near SD card. >>>>> */ >>>>> status = "okay"; >>>>> @@ -214,7 +220,7 @@ >>>>> regulator-always-on; >>>>> }; >>>>> >>>>> - sd6 { >>>>> + vdd_gpu: sd6 { >>>>> regulator-name = "+VDD_GPU_AP"; >>>>> regulator-min-microvolt = <650000>; >>>>> regulator-max-microvolt = >>>>> <1200000>; >>>>> >>>> >>>> Looks good to me. I see the following error when booting but looking at the >>>> code appears to be benign. Thierry, Alex, is this normal/okay? >>> >>> I have the same messages and asked Alexandre about them the other day. He told >>> me that it looks normal. >> >> Ok great. Hopefully, Alex can ACK then. > > Apologies for the (very) delayed reply. > > Yes, the messages you are seeing are part of the normal probe sequence > on Tegra. So this looks good to me. > > Acked-by: Alexandre Courbot <acourbot@nvidia.com> Can you pick this one up for v4.10 as well? Cheers Jon -- nvpublic ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply @ 2016-11-07 13:00 ` Jon Hunter 0 siblings, 0 replies; 20+ messages in thread From: Jon Hunter @ 2016-11-07 13:00 UTC (permalink / raw) To: Alexandre Courbot, Thierry Reding Cc: Paul Kocialkowski, Linux Kernel Mailing List, linux-tegra, linux-arm-kernel, devicetree, Stephen Warren Thierry, On 07/11/16 12:51, Alexandre Courbot wrote: > On Wed, Sep 21, 2016 at 4:57 PM, Jon Hunter <jonathanh@nvidia.com> wrote: >> >> On 20/09/16 19:17, Paul Kocialkowski wrote: >>> * PGP Signed by an unknown key >>> >>> Le mardi 20 septembre 2016 à 13:24 +0100, Jon Hunter a écrit : >>>> On 18/09/16 15:13, Paul Kocialkowski wrote: >>>>> >>>>> This enables the GPU node for tegra124 nyan boards, which is required to >>>>> get graphics acceleration with nouveau on these devices. >>>>> >>>>> Signed-off-by: Paul Kocialkowski <contact@paulk.fr> >>>>> --- >>>>> arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- >>>>> 1 file changed, 7 insertions(+), 1 deletion(-) >>>>> >>>>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi >>>>> b/arch/arm/boot/dts/tegra124-nyan.dtsi >>>>> index dab9509..225ca77 100644 >>>>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi >>>>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi >>>>> @@ -42,6 +42,12 @@ >>>>> }; >>>>> }; >>>>> >>>>> + gpu@0,57000000 { >>>>> + status = "okay"; >>>>> + >>>>> + vdd-supply = <&vdd_gpu>; >>>>> + }; >>>>> + >>>>> serial@70006000 { >>>>> /* Debug connector on the bottom of the board near SD card. >>>>> */ >>>>> status = "okay"; >>>>> @@ -214,7 +220,7 @@ >>>>> regulator-always-on; >>>>> }; >>>>> >>>>> - sd6 { >>>>> + vdd_gpu: sd6 { >>>>> regulator-name = "+VDD_GPU_AP"; >>>>> regulator-min-microvolt = <650000>; >>>>> regulator-max-microvolt = >>>>> <1200000>; >>>>> >>>> >>>> Looks good to me. I see the following error when booting but looking at the >>>> code appears to be benign. Thierry, Alex, is this normal/okay? >>> >>> I have the same messages and asked Alexandre about them the other day. He told >>> me that it looks normal. >> >> Ok great. Hopefully, Alex can ACK then. > > Apologies for the (very) delayed reply. > > Yes, the messages you are seeing are part of the normal probe sequence > on Tegra. So this looks good to me. > > Acked-by: Alexandre Courbot <acourbot@nvidia.com> Can you pick this one up for v4.10 as well? Cheers Jon -- nvpublic ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply 2016-09-18 14:13 ` Paul Kocialkowski (?) @ 2016-11-07 13:29 ` Thierry Reding -1 siblings, 0 replies; 20+ messages in thread From: Thierry Reding @ 2016-11-07 13:29 UTC (permalink / raw) To: Paul Kocialkowski Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-tegra-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, Alexandre Courbot, Stephen Warren [-- Attachment #1: Type: text/plain, Size: 426 bytes --] On Sun, Sep 18, 2016 at 04:13:11PM +0200, Paul Kocialkowski wrote: > This enables the GPU node for tegra124 nyan boards, which is required to > get graphics acceleration with nouveau on these devices. > > Signed-off-by: Paul Kocialkowski <contact-W9ppeneeCTY@public.gmane.org> > --- > arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) Applied, thanks. Thierry [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 801 bytes --] ^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH] ARM: tegra: nyan: Enable GPU node and related supply @ 2016-11-07 13:29 ` Thierry Reding 0 siblings, 0 replies; 20+ messages in thread From: Thierry Reding @ 2016-11-07 13:29 UTC (permalink / raw) To: linux-arm-kernel On Sun, Sep 18, 2016 at 04:13:11PM +0200, Paul Kocialkowski wrote: > This enables the GPU node for tegra124 nyan boards, which is required to > get graphics acceleration with nouveau on these devices. > > Signed-off-by: Paul Kocialkowski <contact@paulk.fr> > --- > arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) Applied, thanks. Thierry -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161107/edbcbb97/attachment.sig> ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] ARM: tegra: nyan: Enable GPU node and related supply @ 2016-11-07 13:29 ` Thierry Reding 0 siblings, 0 replies; 20+ messages in thread From: Thierry Reding @ 2016-11-07 13:29 UTC (permalink / raw) To: Paul Kocialkowski Cc: linux-kernel, linux-tegra, linux-arm-kernel, devicetree, Alexandre Courbot, Stephen Warren [-- Attachment #1: Type: text/plain, Size: 406 bytes --] On Sun, Sep 18, 2016 at 04:13:11PM +0200, Paul Kocialkowski wrote: > This enables the GPU node for tegra124 nyan boards, which is required to > get graphics acceleration with nouveau on these devices. > > Signed-off-by: Paul Kocialkowski <contact@paulk.fr> > --- > arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) Applied, thanks. Thierry [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 801 bytes --] ^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2016-11-07 13:29 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-18 14:13 [PATCH] ARM: tegra: nyan: Enable GPU node and related supply Paul Kocialkowski
2016-09-18 14:13 ` Paul Kocialkowski
2016-09-18 14:13 ` Paul Kocialkowski
[not found] ` <20160918141311.17140-1-contact-W9ppeneeCTY@public.gmane.org>
2016-09-20 12:24 ` Jon Hunter
2016-09-20 12:24 ` Jon Hunter
2016-09-20 12:24 ` Jon Hunter
2016-09-20 18:17 ` Paul Kocialkowski
2016-09-20 18:17 ` Paul Kocialkowski
[not found] ` <1474395433.1215.23.camel-W9ppeneeCTY@public.gmane.org>
2016-09-21 7:57 ` Jon Hunter
2016-09-21 7:57 ` Jon Hunter
2016-09-21 7:57 ` Jon Hunter
[not found] ` <e95335ae-ad19-b8cd-634b-63c6a0b88e01-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-11-07 12:51 ` Alexandre Courbot
2016-11-07 12:51 ` Alexandre Courbot
2016-11-07 12:51 ` Alexandre Courbot
2016-11-07 13:00 ` Jon Hunter
2016-11-07 13:00 ` Jon Hunter
2016-11-07 13:00 ` Jon Hunter
2016-11-07 13:29 ` Thierry Reding
2016-11-07 13:29 ` Thierry Reding
2016-11-07 13:29 ` Thierry Reding
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.