From: Jerome Brunet <jbrunet@baylibre.com> To: Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@codeaurora.org>, Kevin Hilman <khilman@baylibre.com>, Carlo Caione <carlo@caione.org> Cc: Jerome Brunet <jbrunet@baylibre.com>, linux-clk@vger.kernel.org, linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org Subject: [PATCH v2 0/9] clk: meson: update clock controller for audio support Date: Thu, 9 Mar 2017 11:41:45 +0100 [thread overview] Message-ID: <20170309104154.28295-1-jbrunet@baylibre.com> (raw) This patchset is a first round of update to the meson clock controllers to bring audio support. The patchset is based on clk-next. It could be rebased on amlogic tree later on, if you prefer the patches to go through Kevin's tree. First patch fix an issue found while writing patch 5 (Giving ternary operator to SET_PARM) Following Stephen comment on the v1, patch 2 adds the const qualifiers missing upstream. Patches 3 and 4 put the generic muxes and divisors declaration in tables so the register address fixup works in the same way as the clock gates. We are going to add more of these clock types for audio or gpu support, so we can't continue to fix addresses individually like it is currently done. Patches 5 to 8 improve the support of the mpll clocks, now allowing the rate to be set. Among other things, the mplls are the parent clocks of the i2s and spdif clocks. Patch 9 expose the clock gates required to power on the i2s output. These patches have been tested on the meson gxbb p200 board, as part of the ongoing work to bring audio support to meson SoC family. Changes since v1 [0]: * Add SET_PARM fix to the series * Add missing const qualifiers to the clock arrays * No more additional patches required as SAR clocks have been merged [0]: http://lkml.kernel.org/r/20170228133002.17894-1-jbrunet@baylibre.com Jerome Brunet (9): clk: meson: fix SET_PARM macro clk: meson: add missing const qualifiers on gate arrays clk: meson8b: put dividers and muxes in tables clk: gxbb: put dividers and muxes in tables clk: meson: mpll: add rw operation clk: meson: gxbb: mpll: use rw operation clk: meson8b: add the mplls clocks 0, 1 and 2 clk: meson: mpll: correct N2 maximum value dt-bindings: clk: gxbb: expose i2s output clock gates drivers/clk/meson/clk-mpll.c | 152 ++++++++++++++++++++++++++++++++-- drivers/clk/meson/clkc.h | 6 +- drivers/clk/meson/gxbb.c | 66 ++++++++++++--- drivers/clk/meson/gxbb.h | 10 +-- drivers/clk/meson/meson8b.c | 127 ++++++++++++++++++++++++++-- drivers/clk/meson/meson8b.h | 20 ++++- include/dt-bindings/clock/gxbb-clkc.h | 5 ++ 7 files changed, 356 insertions(+), 30 deletions(-) -- 2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: jbrunet@baylibre.com (Jerome Brunet) To: linus-amlogic@lists.infradead.org Subject: [PATCH v2 0/9] clk: meson: update clock controller for audio support Date: Thu, 9 Mar 2017 11:41:45 +0100 [thread overview] Message-ID: <20170309104154.28295-1-jbrunet@baylibre.com> (raw) This patchset is a first round of update to the meson clock controllers to bring audio support. The patchset is based on clk-next. It could be rebased on amlogic tree later on, if you prefer the patches to go through Kevin's tree. First patch fix an issue found while writing patch 5 (Giving ternary operator to SET_PARM) Following Stephen comment on the v1, patch 2 adds the const qualifiers missing upstream. Patches 3 and 4 put the generic muxes and divisors declaration in tables so the register address fixup works in the same way as the clock gates. We are going to add more of these clock types for audio or gpu support, so we can't continue to fix addresses individually like it is currently done. Patches 5 to 8 improve the support of the mpll clocks, now allowing the rate to be set. Among other things, the mplls are the parent clocks of the i2s and spdif clocks. Patch 9 expose the clock gates required to power on the i2s output. These patches have been tested on the meson gxbb p200 board, as part of the ongoing work to bring audio support to meson SoC family. Changes since v1 [0]: * Add SET_PARM fix to the series * Add missing const qualifiers to the clock arrays * No more additional patches required as SAR clocks have been merged [0]: http://lkml.kernel.org/r/20170228133002.17894-1-jbrunet at baylibre.com Jerome Brunet (9): clk: meson: fix SET_PARM macro clk: meson: add missing const qualifiers on gate arrays clk: meson8b: put dividers and muxes in tables clk: gxbb: put dividers and muxes in tables clk: meson: mpll: add rw operation clk: meson: gxbb: mpll: use rw operation clk: meson8b: add the mplls clocks 0, 1 and 2 clk: meson: mpll: correct N2 maximum value dt-bindings: clk: gxbb: expose i2s output clock gates drivers/clk/meson/clk-mpll.c | 152 ++++++++++++++++++++++++++++++++-- drivers/clk/meson/clkc.h | 6 +- drivers/clk/meson/gxbb.c | 66 ++++++++++++--- drivers/clk/meson/gxbb.h | 10 +-- drivers/clk/meson/meson8b.c | 127 ++++++++++++++++++++++++++-- drivers/clk/meson/meson8b.h | 20 ++++- include/dt-bindings/clock/gxbb-clkc.h | 5 ++ 7 files changed, 356 insertions(+), 30 deletions(-) -- 2.9.3
next reply other threads:[~2017-03-09 10:43 UTC|newest] Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-03-09 10:41 Jerome Brunet [this message] 2017-03-09 10:41 ` [PATCH v2 0/9] clk: meson: update clock controller for audio support Jerome Brunet 2017-03-09 10:41 ` [PATCH v2 1/9] clk: meson: fix SET_PARM macro Jerome Brunet 2017-03-09 10:41 ` Jerome Brunet 2017-03-09 10:41 ` [PATCH v2 2/9] clk: meson: add missing const qualifiers on gate arrays Jerome Brunet 2017-03-09 10:41 ` Jerome Brunet 2017-03-09 10:41 ` [PATCH v2 3/9] clk: meson8b: put dividers and muxes in tables Jerome Brunet 2017-03-09 10:41 ` Jerome Brunet 2017-03-21 23:10 ` Michael Turquette 2017-03-21 23:10 ` Michael Turquette 2017-03-21 23:10 ` Michael Turquette 2017-03-09 10:41 ` [PATCH v2 4/9] clk: gxbb: " Jerome Brunet 2017-03-09 10:41 ` Jerome Brunet 2017-03-21 23:10 ` Michael Turquette 2017-03-21 23:10 ` Michael Turquette 2017-03-21 23:10 ` Michael Turquette 2017-03-09 10:41 ` [PATCH v2 5/9] clk: meson: mpll: add rw operation Jerome Brunet 2017-03-09 10:41 ` Jerome Brunet 2017-03-21 23:19 ` Michael Turquette 2017-03-21 23:19 ` Michael Turquette 2017-03-21 23:19 ` Michael Turquette 2017-03-09 10:41 ` [PATCH v2 6/9] clk: meson: gxbb: mpll: use " Jerome Brunet 2017-03-09 10:41 ` Jerome Brunet 2017-03-21 23:20 ` Michael Turquette 2017-03-21 23:20 ` Michael Turquette 2017-03-21 23:20 ` Michael Turquette 2017-03-09 10:41 ` [PATCH v2 7/9] clk: meson8b: add the mplls clocks 0, 1 and 2 Jerome Brunet 2017-03-09 10:41 ` Jerome Brunet 2017-03-21 23:21 ` Michael Turquette 2017-03-21 23:21 ` Michael Turquette 2017-03-21 23:21 ` Michael Turquette 2017-03-09 10:41 ` [PATCH v2 8/9] clk: meson: mpll: correct N2 maximum value Jerome Brunet 2017-03-09 10:41 ` Jerome Brunet 2017-03-09 10:41 ` [PATCH v2 9/9] dt-bindings: clk: gxbb: expose i2s output clock gates Jerome Brunet 2017-03-09 10:41 ` Jerome Brunet 2017-03-11 0:39 ` [PATCH v2 0/9] clk: meson: update clock controller for audio support Kevin Hilman 2017-03-11 0:39 ` Kevin Hilman 2017-03-11 0:39 ` Kevin Hilman 2017-03-27 19:52 ` Michael Turquette 2017-03-27 19:52 ` Michael Turquette 2017-03-27 19:52 ` Michael Turquette 2017-03-27 19:52 ` Michael Turquette
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20170309104154.28295-1-jbrunet@baylibre.com \ --to=jbrunet@baylibre.com \ --cc=carlo@caione.org \ --cc=devicetree@vger.kernel.org \ --cc=khilman@baylibre.com \ --cc=linux-amlogic@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mturquette@baylibre.com \ --cc=sboyd@codeaurora.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.