All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kevin Hilman <khilman@baylibre.com>
To: Jerome Brunet <jbrunet@baylibre.com>
Cc: Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Carlo Caione <carlo@caione.org>,
	linux-clk@vger.kernel.org, linux-amlogic@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v2 0/9] clk: meson: update clock controller for audio support
Date: Fri, 10 Mar 2017 16:39:27 -0800	[thread overview]
Message-ID: <m2r324bq9s.fsf@baylibre.com> (raw)
In-Reply-To: <20170309104154.28295-1-jbrunet@baylibre.com> (Jerome Brunet's message of "Thu, 9 Mar 2017 11:41:45 +0100")

Jerome Brunet <jbrunet@baylibre.com> writes:

> This patchset is a first round of update to the meson clock controllers
> to bring audio support. The patchset is based on clk-next. It could be
> rebased on amlogic tree later on, if you prefer the patches to go through
> Kevin's tree.

I'd prefer these go through the clk tree, and get an immutable branch
that I can use for my stuff that goes through the arm-soc tree.

Kevin

> First patch fix an issue found while writing patch 5 (Giving ternary
> operator to SET_PARM)
>
> Following Stephen comment on the v1, patch 2 adds the const qualifiers
> missing upstream.
>
> Patches 3 and 4 put the generic muxes and divisors declaration in tables so
> the register address fixup works in the same way as the clock gates. We are
> going to add more of these clock types for audio or gpu support, so we
> can't continue to fix addresses individually like it is currently done.
>
> Patches 5 to 8 improve the support of the mpll clocks, now allowing the
> rate to be set. Among other things, the mplls are the parent clocks of the
> i2s and spdif clocks.
>
> Patch 9 expose the clock gates required to power on the i2s output.
>
> These patches have been tested on the meson gxbb p200 board, as part of the
> ongoing work to bring audio support to meson SoC family.
>
> Changes since v1 [0]:
>  * Add SET_PARM fix to the series
>  * Add missing const qualifiers to the clock arrays
>  * No more additional patches required as SAR clocks have been merged
>
> [0]: http://lkml.kernel.org/r/20170228133002.17894-1-jbrunet@baylibre.com
>
> Jerome Brunet (9):
>   clk: meson: fix SET_PARM macro
>   clk: meson: add missing const qualifiers on gate arrays
>   clk: meson8b: put dividers and muxes in tables
>   clk: gxbb: put dividers and muxes in tables
>   clk: meson: mpll: add rw operation
>   clk: meson: gxbb: mpll: use rw operation
>   clk: meson8b: add the mplls clocks 0, 1 and 2
>   clk: meson: mpll: correct N2 maximum value
>   dt-bindings: clk: gxbb: expose i2s output clock gates
>
>  drivers/clk/meson/clk-mpll.c          | 152 ++++++++++++++++++++++++++++++++--
>  drivers/clk/meson/clkc.h              |   6 +-
>  drivers/clk/meson/gxbb.c              |  66 ++++++++++++---
>  drivers/clk/meson/gxbb.h              |  10 +--
>  drivers/clk/meson/meson8b.c           | 127 ++++++++++++++++++++++++++--
>  drivers/clk/meson/meson8b.h           |  20 ++++-
>  include/dt-bindings/clock/gxbb-clkc.h |   5 ++
>  7 files changed, 356 insertions(+), 30 deletions(-)

WARNING: multiple messages have this Message-ID (diff)
From: khilman@baylibre.com (Kevin Hilman)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v2 0/9] clk: meson: update clock controller for audio support
Date: Fri, 10 Mar 2017 16:39:27 -0800	[thread overview]
Message-ID: <m2r324bq9s.fsf@baylibre.com> (raw)
In-Reply-To: <20170309104154.28295-1-jbrunet@baylibre.com> (Jerome Brunet's message of "Thu, 9 Mar 2017 11:41:45 +0100")

Jerome Brunet <jbrunet@baylibre.com> writes:

> This patchset is a first round of update to the meson clock controllers
> to bring audio support. The patchset is based on clk-next. It could be
> rebased on amlogic tree later on, if you prefer the patches to go through
> Kevin's tree.

I'd prefer these go through the clk tree, and get an immutable branch
that I can use for my stuff that goes through the arm-soc tree.

Kevin

> First patch fix an issue found while writing patch 5 (Giving ternary
> operator to SET_PARM)
>
> Following Stephen comment on the v1, patch 2 adds the const qualifiers
> missing upstream.
>
> Patches 3 and 4 put the generic muxes and divisors declaration in tables so
> the register address fixup works in the same way as the clock gates. We are
> going to add more of these clock types for audio or gpu support, so we
> can't continue to fix addresses individually like it is currently done.
>
> Patches 5 to 8 improve the support of the mpll clocks, now allowing the
> rate to be set. Among other things, the mplls are the parent clocks of the
> i2s and spdif clocks.
>
> Patch 9 expose the clock gates required to power on the i2s output.
>
> These patches have been tested on the meson gxbb p200 board, as part of the
> ongoing work to bring audio support to meson SoC family.
>
> Changes since v1 [0]:
>  * Add SET_PARM fix to the series
>  * Add missing const qualifiers to the clock arrays
>  * No more additional patches required as SAR clocks have been merged
>
> [0]: http://lkml.kernel.org/r/20170228133002.17894-1-jbrunet at baylibre.com
>
> Jerome Brunet (9):
>   clk: meson: fix SET_PARM macro
>   clk: meson: add missing const qualifiers on gate arrays
>   clk: meson8b: put dividers and muxes in tables
>   clk: gxbb: put dividers and muxes in tables
>   clk: meson: mpll: add rw operation
>   clk: meson: gxbb: mpll: use rw operation
>   clk: meson8b: add the mplls clocks 0, 1 and 2
>   clk: meson: mpll: correct N2 maximum value
>   dt-bindings: clk: gxbb: expose i2s output clock gates
>
>  drivers/clk/meson/clk-mpll.c          | 152 ++++++++++++++++++++++++++++++++--
>  drivers/clk/meson/clkc.h              |   6 +-
>  drivers/clk/meson/gxbb.c              |  66 ++++++++++++---
>  drivers/clk/meson/gxbb.h              |  10 +--
>  drivers/clk/meson/meson8b.c           | 127 ++++++++++++++++++++++++++--
>  drivers/clk/meson/meson8b.h           |  20 ++++-
>  include/dt-bindings/clock/gxbb-clkc.h |   5 ++
>  7 files changed, 356 insertions(+), 30 deletions(-)

  parent reply	other threads:[~2017-03-11  0:39 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-09 10:41 [PATCH v2 0/9] clk: meson: update clock controller for audio support Jerome Brunet
2017-03-09 10:41 ` Jerome Brunet
2017-03-09 10:41 ` [PATCH v2 1/9] clk: meson: fix SET_PARM macro Jerome Brunet
2017-03-09 10:41   ` Jerome Brunet
2017-03-09 10:41 ` [PATCH v2 2/9] clk: meson: add missing const qualifiers on gate arrays Jerome Brunet
2017-03-09 10:41   ` Jerome Brunet
2017-03-09 10:41 ` [PATCH v2 3/9] clk: meson8b: put dividers and muxes in tables Jerome Brunet
2017-03-09 10:41   ` Jerome Brunet
2017-03-21 23:10   ` Michael Turquette
2017-03-21 23:10     ` Michael Turquette
2017-03-21 23:10     ` Michael Turquette
2017-03-09 10:41 ` [PATCH v2 4/9] clk: gxbb: " Jerome Brunet
2017-03-09 10:41   ` Jerome Brunet
2017-03-21 23:10   ` Michael Turquette
2017-03-21 23:10     ` Michael Turquette
2017-03-21 23:10     ` Michael Turquette
2017-03-09 10:41 ` [PATCH v2 5/9] clk: meson: mpll: add rw operation Jerome Brunet
2017-03-09 10:41   ` Jerome Brunet
2017-03-21 23:19   ` Michael Turquette
2017-03-21 23:19     ` Michael Turquette
2017-03-21 23:19     ` Michael Turquette
2017-03-09 10:41 ` [PATCH v2 6/9] clk: meson: gxbb: mpll: use " Jerome Brunet
2017-03-09 10:41   ` Jerome Brunet
2017-03-21 23:20   ` Michael Turquette
2017-03-21 23:20     ` Michael Turquette
2017-03-21 23:20     ` Michael Turquette
2017-03-09 10:41 ` [PATCH v2 7/9] clk: meson8b: add the mplls clocks 0, 1 and 2 Jerome Brunet
2017-03-09 10:41   ` Jerome Brunet
2017-03-21 23:21   ` Michael Turquette
2017-03-21 23:21     ` Michael Turquette
2017-03-21 23:21     ` Michael Turquette
2017-03-09 10:41 ` [PATCH v2 8/9] clk: meson: mpll: correct N2 maximum value Jerome Brunet
2017-03-09 10:41   ` Jerome Brunet
2017-03-09 10:41 ` [PATCH v2 9/9] dt-bindings: clk: gxbb: expose i2s output clock gates Jerome Brunet
2017-03-09 10:41   ` Jerome Brunet
2017-03-11  0:39 ` Kevin Hilman [this message]
2017-03-11  0:39   ` [PATCH v2 0/9] clk: meson: update clock controller for audio support Kevin Hilman
2017-03-11  0:39   ` Kevin Hilman
2017-03-27 19:52   ` Michael Turquette
2017-03-27 19:52     ` Michael Turquette
2017-03-27 19:52     ` Michael Turquette
2017-03-27 19:52     ` Michael Turquette

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=m2r324bq9s.fsf@baylibre.com \
    --to=khilman@baylibre.com \
    --cc=carlo@caione.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.