[PATCH v3 0/4] ARM: dts: sunxi: Add CAN node and can0_pins_a pinctrl settings

[PATCH v3 0/4] ARM: dts: sunxi: Add CAN node and can0_pins_a pinctrl settings

[Patrick Menschel]

The Allwinner A10/A20 SoCs have an on-board CAN (Controller Area Network)
controller. This patch adds the CAN core to the SoC's include files,
sun4i-a10.dtsi and sun7i-a20.dtsi.

On linux-can mailing list was a discussion about updating the device tree bindings
https://lkml.org/lkml/2015/9/17/220
but it did not progress past writing the documentation file.
Documentation/devicetree/bindings/net/can/sun4i_can.txt

The CAN controller can be enabled in a board specific dts file as
described in the documentation file or by using a device tree overlay.

I have tested the patch on a Banana Pi (A20 SoC) with mainline kernel 4.10.5.

History:
    v3: added "allwinner,sun7i-a20-can" compatible to can0 device node contents,
        make separate patches for device nodes and pinctrl settings

    v2: changed can0_pins_a node contents to new generic binding method, 
	changed can0_pins_a node position by alphabetical order,
        changed can0 device node position by rising physical address order

    v1: initial

Patrick Menschel (4):
  ARM: dts: sun4i: Add CAN node
  ARM: dts: sun4i: Add can0_pins_a pinctrl settings
  ARM: dts: sun7i: Add CAN node
  ARM: dts: sun7i: Add can0_pins_a pinctrl settings

 arch/arm/boot/dts/sun4i-a10.dtsi | 13 +++++++++++++
 arch/arm/boot/dts/sun7i-a20.dtsi | 14 ++++++++++++++
 2 files changed, 27 insertions(+)

-- 
1.9.1

[PATCH v3 0/4] ARM: dts: sunxi: Add CAN node and can0_pins_a pinctrl settings

[Patrick Menschel]

The Allwinner A10/A20 SoCs have an on-board CAN (Controller Area Network)
controller. This patch adds the CAN core to the SoC's include files,
sun4i-a10.dtsi and sun7i-a20.dtsi.

On linux-can mailing list was a discussion about updating the device tree bindings
https://lkml.org/lkml/2015/9/17/220
but it did not progress past writing the documentation file.
Documentation/devicetree/bindings/net/can/sun4i_can.txt

The CAN controller can be enabled in a board specific dts file as
described in the documentation file or by using a device tree overlay.

I have tested the patch on a Banana Pi (A20 SoC) with mainline kernel 4.10.5.

History:
    v3: added "allwinner,sun7i-a20-can" compatible to can0 device node contents,
        make separate patches for device nodes and pinctrl settings

    v2: changed can0_pins_a node contents to new generic binding method, 
	changed can0_pins_a node position by alphabetical order,
        changed can0 device node position by rising physical address order

    v1: initial

Patrick Menschel (4):
  ARM: dts: sun4i: Add CAN node
  ARM: dts: sun4i: Add can0_pins_a pinctrl settings
  ARM: dts: sun7i: Add CAN node
  ARM: dts: sun7i: Add can0_pins_a pinctrl settings

 arch/arm/boot/dts/sun4i-a10.dtsi | 13 +++++++++++++
 arch/arm/boot/dts/sun7i-a20.dtsi | 14 ++++++++++++++
 2 files changed, 27 insertions(+)

-- 
1.9.1

[PATCH v3 1/4] ARM: dts: sun4i: Add CAN node

[Patrick Menschel]

The A10 SoC has an on-board CAN controller.
This patch adds the device node.

This patch is adapted from the description in
Documentation/devicetree/bindings/net/can/sun4i_can.txt

Signed-off-by: Patrick Menschel <menschel.p-1KBjaw7Xf1+zQB+pC5nmwQ@public.gmane.org>
---
 arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index ba20b48..7c559e7 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -1313,6 +1313,14 @@
 			#size-cells = <0>;
 		};
 
+		can0: can@01c2bc00 {
+			compatible = "allwinner,sun4i-a10-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <26>;
+			clocks = <&apb1_gates 4>;
+			status = "disabled";
+		};
+
 		ps20: ps2@01c2a000 {
 			compatible = "allwinner,sun4i-a10-ps2";
 			reg = <0x01c2a000 0x400>;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 1/4] ARM: dts: sun4i: Add CAN node

[Patrick Menschel]

The A10 SoC has an on-board CAN controller.
This patch adds the device node.

This patch is adapted from the description in
Documentation/devicetree/bindings/net/can/sun4i_can.txt

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
---
 arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index ba20b48..7c559e7 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -1313,6 +1313,14 @@
 			#size-cells = <0>;
 		};
 
+		can0: can at 01c2bc00 {
+			compatible = "allwinner,sun4i-a10-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <26>;
+			clocks = <&apb1_gates 4>;
+			status = "disabled";
+		};
+
 		ps20: ps2 at 01c2a000 {
 			compatible = "allwinner,sun4i-a10-ps2";
 			reg = <0x01c2a000 0x400>;
-- 
1.9.1

[PATCH v3 1/4] ARM: dts: sun4i: Add CAN node

[Patrick Menschel]

The A10 SoC has an on-board CAN controller.
This patch adds the device node.

This patch is adapted from the description in
Documentation/devicetree/bindings/net/can/sun4i_can.txt

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
---
 arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index ba20b48..7c559e7 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -1313,6 +1313,14 @@
 			#size-cells = <0>;
 		};
 
+		can0: can@01c2bc00 {
+			compatible = "allwinner,sun4i-a10-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <26>;
+			clocks = <&apb1_gates 4>;
+			status = "disabled";
+		};
+
 		ps20: ps2@01c2a000 {
 			compatible = "allwinner,sun4i-a10-ps2";
 			reg = <0x01c2a000 0x400>;
-- 
1.9.1

Re: [PATCH v3 1/4] ARM: dts: sun4i: Add CAN node

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1092 bytes --]

On Mon, Apr 03, 2017 at 07:00:11PM +0200, Patrick Menschel wrote:
> The A10 SoC has an on-board CAN controller.
> This patch adds the device node.
> 
> This patch is adapted from the description in
> Documentation/devicetree/bindings/net/can/sun4i_can.txt
> 
> Signed-off-by: Patrick Menschel <menschel.p-1KBjaw7Xf1+zQB+pC5nmwQ@public.gmane.org>
> ---
>  arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
> index ba20b48..7c559e7 100644
> --- a/arch/arm/boot/dts/sun4i-a10.dtsi
> +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
> @@ -1313,6 +1313,14 @@
>  			#size-cells = <0>;
>  		};
>  
> +		can0: can@01c2bc00 {
> +			compatible = "allwinner,sun4i-a10-can";
> +			reg = <0x01c2bc00 0x400>;
> +			interrupts = <26>;
> +			clocks = <&apb1_gates 4>;
> +			status = "disabled";
> +		};
> +

This wasn't ordered properly. Fixed and applied.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

[PATCH v3 1/4] ARM: dts: sun4i: Add CAN node

[Maxime Ripard]

On Mon, Apr 03, 2017 at 07:00:11PM +0200, Patrick Menschel wrote:
> The A10 SoC has an on-board CAN controller.
> This patch adds the device node.
> 
> This patch is adapted from the description in
> Documentation/devicetree/bindings/net/can/sun4i_can.txt
> 
> Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
> ---
>  arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
> index ba20b48..7c559e7 100644
> --- a/arch/arm/boot/dts/sun4i-a10.dtsi
> +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
> @@ -1313,6 +1313,14 @@
>  			#size-cells = <0>;
>  		};
>  
> +		can0: can at 01c2bc00 {
> +			compatible = "allwinner,sun4i-a10-can";
> +			reg = <0x01c2bc00 0x400>;
> +			interrupts = <26>;
> +			clocks = <&apb1_gates 4>;
> +			status = "disabled";
> +		};
> +

This wasn't ordered properly. Fixed and applied.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170404/d8b959e7/attachment-0001.sig>

Re: [PATCH v3 1/4] ARM: dts: sun4i: Add CAN node

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1062 bytes --]

On Mon, Apr 03, 2017 at 07:00:11PM +0200, Patrick Menschel wrote:
> The A10 SoC has an on-board CAN controller.
> This patch adds the device node.
> 
> This patch is adapted from the description in
> Documentation/devicetree/bindings/net/can/sun4i_can.txt
> 
> Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
> ---
>  arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
> index ba20b48..7c559e7 100644
> --- a/arch/arm/boot/dts/sun4i-a10.dtsi
> +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
> @@ -1313,6 +1313,14 @@
>  			#size-cells = <0>;
>  		};
>  
> +		can0: can@01c2bc00 {
> +			compatible = "allwinner,sun4i-a10-can";
> +			reg = <0x01c2bc00 0x400>;
> +			interrupts = <26>;
> +			clocks = <&apb1_gates 4>;
> +			status = "disabled";
> +		};
> +

This wasn't ordered properly. Fixed and applied.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

Re: [PATCH v3 1/4] ARM: dts: sun4i: Add CAN node

[Patrick Menschel]

[-- Attachment #1: Type: text/plain, Size: 1585 bytes --]

Am 04.04.2017 um 17:40 schrieb Maxime Ripard:
> On Mon, Apr 03, 2017 at 07:00:11PM +0200, Patrick Menschel wrote:
>> The A10 SoC has an on-board CAN controller.
>> This patch adds the device node.
>>
>> This patch is adapted from the description in
>> Documentation/devicetree/bindings/net/can/sun4i_can.txt
>>
>> Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
>> ---
>>  arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++
>>  1 file changed, 8 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
>> index ba20b48..7c559e7 100644
>> --- a/arch/arm/boot/dts/sun4i-a10.dtsi
>> +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
>> @@ -1313,6 +1313,14 @@
>>  			#size-cells = <0>;
>>  		};
>>  
>> +		can0: can@01c2bc00 {
>> +			compatible = "allwinner,sun4i-a10-can";
>> +			reg = <0x01c2bc00 0x400>;
>> +			interrupts = <26>;
>> +			clocks = <&apb1_gates 4>;
>> +			status = "disabled";
>> +		};
>> +
> This wasn't ordered properly. Fixed and applied.
>
>
Now that you mention it, ps20 and ps21 do not follow follow the rising
address order.

        uart7: serial@01c29c00 {
            ...
        i2c0: i2c@01c2ac00 {
            ...
        i2c1: i2c@01c2b000 {
            ...
        i2c2: i2c@01c2b400 {
            ...
        can0: can@01c2bc00 {
            ...
        ps20: ps2@01c2a000 {
            ....
        ps21: ps2@01c2a400 {
            ...
       
The correct order would be
uart7, ps20, ps21, i2c0, i2c1, i2c2, can0 .

I'll fix that in patch v4.

Thanks,
Patrick


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 3709 bytes --]

[PATCH v3 1/4] ARM: dts: sun4i: Add CAN node

[Patrick Menschel]

Am 04.04.2017 um 17:40 schrieb Maxime Ripard:
> On Mon, Apr 03, 2017 at 07:00:11PM +0200, Patrick Menschel wrote:
>> The A10 SoC has an on-board CAN controller.
>> This patch adds the device node.
>>
>> This patch is adapted from the description in
>> Documentation/devicetree/bindings/net/can/sun4i_can.txt
>>
>> Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
>> ---
>>  arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++
>>  1 file changed, 8 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
>> index ba20b48..7c559e7 100644
>> --- a/arch/arm/boot/dts/sun4i-a10.dtsi
>> +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
>> @@ -1313,6 +1313,14 @@
>>  			#size-cells = <0>;
>>  		};
>>  
>> +		can0: can at 01c2bc00 {
>> +			compatible = "allwinner,sun4i-a10-can";
>> +			reg = <0x01c2bc00 0x400>;
>> +			interrupts = <26>;
>> +			clocks = <&apb1_gates 4>;
>> +			status = "disabled";
>> +		};
>> +
> This wasn't ordered properly. Fixed and applied.
>
>
Now that you mention it, ps20 and ps21 do not follow follow the rising
address order.

        uart7: serial at 01c29c00 {
            ...
        i2c0: i2c at 01c2ac00 {
            ...
        i2c1: i2c at 01c2b000 {
            ...
        i2c2: i2c at 01c2b400 {
            ...
        can0: can at 01c2bc00 {
            ...
        ps20: ps2 at 01c2a000 {
            ....
        ps21: ps2 at 01c2a400 {
            ...
       
The correct order would be
uart7, ps20, ps21, i2c0, i2c1, i2c2, can0 .

I'll fix that in patch v4.

Thanks,
Patrick

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3709 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170404/8cb04d6b/attachment.p7s>

[PATCH v3 2/4] ARM: dts: sun4i: Add can0_pins_a pinctrl settings

[Patrick Menschel]

The A10 SoC has an on-board CAN controller. This patch adds the
pinctrl settings for pins PH20 and PH21.

This patch is adapted from the description in
Documentation/devicetree/bindings/net/can/sun4i_can.txt

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
---
 arch/arm/boot/dts/sun4i-a10.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 7c559e7..f7dced4 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -974,6 +974,11 @@
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
+			can0_pins_a: can0@0 {
+				pins = "PH20","PH21";
+				function = "can";
+			};
+
 			emac_pins_a: emac0@0 {
 				pins = "PA0", "PA1", "PA2",
 				       "PA3", "PA4", "PA5", "PA6",
-- 
1.9.1

[PATCH v3 2/4] ARM: dts: sun4i: Add can0_pins_a pinctrl settings

[Patrick Menschel]

The A10 SoC has an on-board CAN controller. This patch adds the
pinctrl settings for pins PH20 and PH21.

This patch is adapted from the description in
Documentation/devicetree/bindings/net/can/sun4i_can.txt

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
---
 arch/arm/boot/dts/sun4i-a10.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 7c559e7..f7dced4 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -974,6 +974,11 @@
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
+			can0_pins_a: can0 at 0 {
+				pins = "PH20","PH21";
+				function = "can";
+			};
+
 			emac_pins_a: emac0 at 0 {
 				pins = "PA0", "PA1", "PA2",
 				       "PA3", "PA4", "PA5", "PA6",
-- 
1.9.1

Re: [PATCH v3 2/4] ARM: dts: sun4i: Add can0_pins_a pinctrl settings

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 965 bytes --]

On Mon, Apr 03, 2017 at 07:00:12PM +0200, Patrick Menschel wrote:
> The A10 SoC has an on-board CAN controller. This patch adds the
> pinctrl settings for pins PH20 and PH21.
> 
> This patch is adapted from the description in
> Documentation/devicetree/bindings/net/can/sun4i_can.txt
> 
> Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
> ---
>  arch/arm/boot/dts/sun4i-a10.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
> index 7c559e7..f7dced4 100644
> --- a/arch/arm/boot/dts/sun4i-a10.dtsi
> +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
> @@ -974,6 +974,11 @@
>  			#interrupt-cells = <3>;
>  			#gpio-cells = <3>;
>  
> +			can0_pins_a: can0@0 {
> +				pins = "PH20","PH21";

You need a space after the comma here. Fixed and applied.
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

[PATCH v3 2/4] ARM: dts: sun4i: Add can0_pins_a pinctrl settings

[Maxime Ripard]

On Mon, Apr 03, 2017 at 07:00:12PM +0200, Patrick Menschel wrote:
> The A10 SoC has an on-board CAN controller. This patch adds the
> pinctrl settings for pins PH20 and PH21.
> 
> This patch is adapted from the description in
> Documentation/devicetree/bindings/net/can/sun4i_can.txt
> 
> Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
> ---
>  arch/arm/boot/dts/sun4i-a10.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
> index 7c559e7..f7dced4 100644
> --- a/arch/arm/boot/dts/sun4i-a10.dtsi
> +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
> @@ -974,6 +974,11 @@
>  			#interrupt-cells = <3>;
>  			#gpio-cells = <3>;
>  
> +			can0_pins_a: can0 at 0 {
> +				pins = "PH20","PH21";

You need a space after the comma here. Fixed and applied.
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170404/773f44d3/attachment.sig>

[PATCH v3 3/4] ARM: dts: sun7i: Add CAN node

[Patrick Menschel]

The A20 SoC has an on-board CAN controller.
This patch adds the device node.

The CAN controller is inherited from the A10 SoC and uses the same driver.

This patch is adapted from the description in
Documentation/devicetree/bindings/net/can/sun4i_can.txt

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
---
 arch/arm/boot/dts/sun7i-a20.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 2db97fc..c637e10 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -1582,6 +1582,15 @@
 			#size-cells = <0>;
 		};
 
+		can0: can@01c2bc00 {
+			compatible = "allwinner,sun7i-a20-can",
+				     "allwinner,sun4i-a10-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 4>;
+			status = "disabled";
+		};
+
 		i2c4: i2c@01c2c000 {
 			compatible = "allwinner,sun7i-a20-i2c",
 				     "allwinner,sun4i-a10-i2c";
-- 
1.9.1

[PATCH v3 3/4] ARM: dts: sun7i: Add CAN node

[Patrick Menschel]

The A20 SoC has an on-board CAN controller.
This patch adds the device node.

The CAN controller is inherited from the A10 SoC and uses the same driver.

This patch is adapted from the description in
Documentation/devicetree/bindings/net/can/sun4i_can.txt

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
---
 arch/arm/boot/dts/sun7i-a20.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 2db97fc..c637e10 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -1582,6 +1582,15 @@
 			#size-cells = <0>;
 		};
 
+		can0: can at 01c2bc00 {
+			compatible = "allwinner,sun7i-a20-can",
+				     "allwinner,sun4i-a10-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 4>;
+			status = "disabled";
+		};
+
 		i2c4: i2c at 01c2c000 {
 			compatible = "allwinner,sun7i-a20-i2c",
 				     "allwinner,sun4i-a10-i2c";
-- 
1.9.1

[PATCH v3 4/4] ARM: dts: sun7i: Add can0_pins_a pinctrl settings

[Patrick Menschel]

The A20 SoC has an on-board CAN controller. This patch adds
the pinctrl settings for pins PH20 and PH21.

This patch is adapted from the description in
Documentation/devicetree/bindings/net/can/sun4i_can.txt

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
---
 arch/arm/boot/dts/sun7i-a20.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index c637e10..8536caf 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -1096,6 +1096,11 @@
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
+			can0_pins_a: can0@0 {
+				pins = "PH20","PH21";
+				function = "can";
+			};
+
 			clk_out_a_pins_a: clk_out_a@0 {
 				pins = "PI12";
 				function = "clk_out_a";
-- 
1.9.1

[PATCH v3 4/4] ARM: dts: sun7i: Add can0_pins_a pinctrl settings

[Patrick Menschel]

The A20 SoC has an on-board CAN controller. This patch adds
the pinctrl settings for pins PH20 and PH21.

This patch is adapted from the description in
Documentation/devicetree/bindings/net/can/sun4i_can.txt

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
---
 arch/arm/boot/dts/sun7i-a20.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index c637e10..8536caf 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -1096,6 +1096,11 @@
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
+			can0_pins_a: can0 at 0 {
+				pins = "PH20","PH21";
+				function = "can";
+			};
+
 			clk_out_a_pins_a: clk_out_a at 0 {
 				pins = "PI12";
 				function = "clk_out_a";
-- 
1.9.1

Re: [PATCH v3 4/4] ARM: dts: sun7i: Add can0_pins_a pinctrl settings

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1038 bytes --]

On Mon, Apr 03, 2017 at 07:00:14PM +0200, Patrick Menschel wrote:
> The A20 SoC has an on-board CAN controller. This patch adds
> the pinctrl settings for pins PH20 and PH21.
> 
> This patch is adapted from the description in
> Documentation/devicetree/bindings/net/can/sun4i_can.txt
> 
> Signed-off-by: Patrick Menschel <menschel.p-1KBjaw7Xf1+zQB+pC5nmwQ@public.gmane.org>
> ---
>  arch/arm/boot/dts/sun7i-a20.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
> index c637e10..8536caf 100644
> --- a/arch/arm/boot/dts/sun7i-a20.dtsi
> +++ b/arch/arm/boot/dts/sun7i-a20.dtsi
> @@ -1096,6 +1096,11 @@
>  			#interrupt-cells = <3>;
>  			#gpio-cells = <3>;
>  
> +			can0_pins_a: can0@0 {
> +				pins = "PH20","PH21";

Same thing here, you need a space after that comma. I've fixed it and
applied the patch.

Thanks!
Maxime
-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

[PATCH v3 4/4] ARM: dts: sun7i: Add can0_pins_a pinctrl settings

[Maxime Ripard]

On Mon, Apr 03, 2017 at 07:00:14PM +0200, Patrick Menschel wrote:
> The A20 SoC has an on-board CAN controller. This patch adds
> the pinctrl settings for pins PH20 and PH21.
> 
> This patch is adapted from the description in
> Documentation/devicetree/bindings/net/can/sun4i_can.txt
> 
> Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
> ---
>  arch/arm/boot/dts/sun7i-a20.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
> index c637e10..8536caf 100644
> --- a/arch/arm/boot/dts/sun7i-a20.dtsi
> +++ b/arch/arm/boot/dts/sun7i-a20.dtsi
> @@ -1096,6 +1096,11 @@
>  			#interrupt-cells = <3>;
>  			#gpio-cells = <3>;
>  
> +			can0_pins_a: can0 at 0 {
> +				pins = "PH20","PH21";

Same thing here, you need a space after that comma. I've fixed it and
applied the patch.

Thanks!
Maxime
-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170404/7bf638a5/attachment.sig>

Re: [PATCH v3 4/4] ARM: dts: sun7i: Add can0_pins_a pinctrl settings

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1008 bytes --]

On Mon, Apr 03, 2017 at 07:00:14PM +0200, Patrick Menschel wrote:
> The A20 SoC has an on-board CAN controller. This patch adds
> the pinctrl settings for pins PH20 and PH21.
> 
> This patch is adapted from the description in
> Documentation/devicetree/bindings/net/can/sun4i_can.txt
> 
> Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
> ---
>  arch/arm/boot/dts/sun7i-a20.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
> index c637e10..8536caf 100644
> --- a/arch/arm/boot/dts/sun7i-a20.dtsi
> +++ b/arch/arm/boot/dts/sun7i-a20.dtsi
> @@ -1096,6 +1096,11 @@
>  			#interrupt-cells = <3>;
>  			#gpio-cells = <3>;
>  
> +			can0_pins_a: can0@0 {
> +				pins = "PH20","PH21";

Same thing here, you need a space after that comma. I've fixed it and
applied the patch.

Thanks!
Maxime
-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]