* [PATCHv4 00/15] R-Car VSP1 Histogram Support
@ 2017-04-10 19:26 Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 01/15] v4l: Clearly document interactions between formats, controls and buffers Hans Verkuil
` (16 more replies)
0 siblings, 17 replies; 21+ messages in thread
From: Hans Verkuil @ 2017-04-10 19:26 UTC (permalink / raw)
To: linux-media; +Cc: Laurent Pinchart, Sakari Ailus
From: Hans Verkuil <hans.verkuil@cisco.com>
This patch series is the rebased version of this pull request:
https://www.mail-archive.com/linux-media@vger.kernel.org/msg111025.html
It slightly modifies 'Add metadata buffer type and format' (remove
experimental note and add newline after label) and it adds support
for V4L2_CTRL_FLAG_MODIFY_LAYOUT, as requested by Mauro.
No other changes were made.
Regards,
Hans
Hans Verkuil (5):
vidioc-queryctrl.rst: document V4L2_CTRL_FLAG_MODIFY_LAYOUT
videodev.h: add V4L2_CTRL_FLAG_MODIFY_LAYOUT
v4l2-ctrls.c: set V4L2_CTRL_FLAG_MODIFY_LAYOUT for ROTATE
buffer.rst: clarify how V4L2_CTRL_FLAG_MODIFY_LAYOUT/GRABBER are used
vsp1: set V4L2_CTRL_FLAG_MODIFY_LAYOUT for histogram controls
Laurent Pinchart (8):
v4l: Clearly document interactions between formats, controls and
buffers
v4l: vsp1: wpf: Implement rotation support
v4l: Add metadata buffer type and format
v4l: vsp1: Add histogram support
v4l: vsp1: Support histogram generators in pipeline configuration
v4l: vsp1: Fix HGO and HGT routing register addresses
v4l: Define a pixel format for the R-Car VSP1 1-D histogram engine
v4l: vsp1: Add HGO support
Niklas Söderlund (2):
v4l: Define a pixel format for the R-Car VSP1 2-D histogram engine
v4l: vsp1: Add HGT support
Documentation/media/uapi/v4l/buffer.rst | 122 ++++
Documentation/media/uapi/v4l/dev-meta.rst | 58 ++
Documentation/media/uapi/v4l/devices.rst | 1 +
Documentation/media/uapi/v4l/meta-formats.rst | 16 +
.../media/uapi/v4l/pixfmt-meta-vsp1-hgo.rst | 168 ++++++
.../media/uapi/v4l/pixfmt-meta-vsp1-hgt.rst | 120 ++++
Documentation/media/uapi/v4l/pixfmt.rst | 1 +
Documentation/media/uapi/v4l/vidioc-querycap.rst | 3 +
Documentation/media/uapi/v4l/vidioc-queryctrl.rst | 13 +
Documentation/media/videodev2.h.rst.exceptions | 3 +
drivers/media/platform/Kconfig | 1 +
drivers/media/platform/vsp1/Makefile | 1 +
drivers/media/platform/vsp1/vsp1.h | 6 +
drivers/media/platform/vsp1/vsp1_drm.c | 2 +-
drivers/media/platform/vsp1/vsp1_drv.c | 70 ++-
drivers/media/platform/vsp1/vsp1_entity.c | 154 ++++-
drivers/media/platform/vsp1/vsp1_entity.h | 8 +-
drivers/media/platform/vsp1/vsp1_hgo.c | 230 ++++++++
drivers/media/platform/vsp1/vsp1_hgo.h | 45 ++
drivers/media/platform/vsp1/vsp1_hgt.c | 222 +++++++
drivers/media/platform/vsp1/vsp1_hgt.h | 42 ++
drivers/media/platform/vsp1/vsp1_histo.c | 646 +++++++++++++++++++++
drivers/media/platform/vsp1/vsp1_histo.h | 84 +++
drivers/media/platform/vsp1/vsp1_pipe.c | 38 +-
drivers/media/platform/vsp1/vsp1_pipe.h | 4 +
drivers/media/platform/vsp1/vsp1_regs.h | 33 +-
drivers/media/platform/vsp1/vsp1_rpf.c | 2 +-
drivers/media/platform/vsp1/vsp1_rwpf.c | 5 +
drivers/media/platform/vsp1/vsp1_rwpf.h | 7 +-
drivers/media/platform/vsp1/vsp1_video.c | 42 +-
drivers/media/platform/vsp1/vsp1_wpf.c | 205 +++++--
drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 19 +
drivers/media/v4l2-core/v4l2-ctrls.c | 4 +
drivers/media/v4l2-core/v4l2-dev.c | 16 +-
drivers/media/v4l2-core/v4l2-ioctl.c | 36 ++
drivers/media/v4l2-core/videobuf2-v4l2.c | 3 +
include/media/v4l2-ioctl.h | 17 +
include/trace/events/v4l2.h | 1 +
include/uapi/linux/videodev2.h | 18 +
39 files changed, 2364 insertions(+), 102 deletions(-)
create mode 100644 Documentation/media/uapi/v4l/dev-meta.rst
create mode 100644 Documentation/media/uapi/v4l/meta-formats.rst
create mode 100644 Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgo.rst
create mode 100644 Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgt.rst
create mode 100644 drivers/media/platform/vsp1/vsp1_hgo.c
create mode 100644 drivers/media/platform/vsp1/vsp1_hgo.h
create mode 100644 drivers/media/platform/vsp1/vsp1_hgt.c
create mode 100644 drivers/media/platform/vsp1/vsp1_hgt.h
create mode 100644 drivers/media/platform/vsp1/vsp1_histo.c
create mode 100644 drivers/media/platform/vsp1/vsp1_histo.h
--
2.11.0
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCHv4 01/15] v4l: Clearly document interactions between formats, controls and buffers
2017-04-10 19:26 [PATCHv4 00/15] R-Car VSP1 Histogram Support Hans Verkuil
@ 2017-04-10 19:26 ` Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 02/15] v4l: vsp1: wpf: Implement rotation support Hans Verkuil
` (15 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Hans Verkuil @ 2017-04-10 19:26 UTC (permalink / raw)
To: linux-media; +Cc: Laurent Pinchart, Sakari Ailus, Laurent Pinchart
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
V4L2 exposes parameters that influence buffers sizes through the format
ioctls (VIDIOC_G_FMT, VIDIOC_TRY_FMT, VIDIOC_S_FMT, and possibly
VIDIOC_G_SELECTION and VIDIOC_S_SELECTION). Other parameters not part of
the format structure may also influence buffer sizes or buffer layout in
general. One existing such parameter is rotation, which is implemented
by the V4L2_CID_ROTATE control and thus exposed through the V4L2 control
ioctls.
The interaction between those parameters and buffers is currently only
partially specified by the V4L2 API. In particular interactions between
controls and buffers isn't specified at all. The behaviour of the
VIDIOC_S_FMT and VIDIOC_S_SELECTION ioctls when buffers are allocated is
also not fully specified.
This patch clearly defines and documents the interactions between
formats, selections, controls and buffers.
The preparatory discussions for the documentation change considered
completely disallowing controls that change the buffer size or layout,
in favour of extending the format API with a new ioctl that would bundle
those controls with format information. The idea has been rejected, as
this would essentially be a restricted version of the upcoming request
API that wouldn't bring any additional value.
Another option we have considered was to mandate the use of the request
API to modify controls that influence buffer size or layout. This has
also been rejected on the grounds that requiring the request API to
change rotation even when streaming is stopped would significantly
complicate implementation of drivers and usage of the V4L2 API for
applications.
Applications will however be required to use the upcoming request API to
change at runtime formats or controls that influence the buffer size or
layout, because of the need to synchronize buffers with the formats and
controls. Otherwise there would be no way to interpret the content of a
buffer correctly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
---
Documentation/media/uapi/v4l/buffer.rst | 110 ++++++++++++++++++++++++++++++++
1 file changed, 110 insertions(+)
diff --git a/Documentation/media/uapi/v4l/buffer.rst b/Documentation/media/uapi/v4l/buffer.rst
index ac58966ccb9b..d1e0d55dc219 100644
--- a/Documentation/media/uapi/v4l/buffer.rst
+++ b/Documentation/media/uapi/v4l/buffer.rst
@@ -34,6 +34,116 @@ flags are copied from the OUTPUT video buffer to the CAPTURE video
buffer.
+Interactions between formats, controls and buffers
+==================================================
+
+V4L2 exposes parameters that influence the buffer size, or the way data is
+laid out in the buffer. Those parameters are exposed through both formats and
+controls. One example of such a control is the ``V4L2_CID_ROTATE`` control
+that modifies the direction in which pixels are stored in the buffer, as well
+as the buffer size when the selected format includes padding at the end of
+lines.
+
+The set of information needed to interpret the content of a buffer (e.g. the
+pixel format, the line stride, the tiling orientation or the rotation) is
+collectively referred to in the rest of this section as the buffer layout.
+
+Modifying formats or controls that influence the buffer size or layout require
+the stream to be stopped. Any attempt at such a modification while the stream
+is active shall cause the ioctl setting the format or the control to return
+the ``EBUSY`` error code.
+
+.. note::
+
+ The :c:func:`VIDIOC_S_SELECTION` ioctl can, depending on the hardware (for
+ instance if the device doesn't include a scaler), modify the format in
+ addition to the selection rectangle. Similarly, the
+ :c:func:`VIDIOC_S_INPUT`, :c:func:`VIDIOC_S_OUTPUT`, :c:func:`VIDIOC_S_STD`
+ and :c:func:`VIDIOC_S_DV_TIMINGS` ioctls can also modify the format and
+ selection rectangles. When those ioctls result in a buffer size or layout
+ change, drivers shall handle that condition as they would handle it in the
+ :c:func:`VIDIOC_S_FMT` ioctl in all cases described in this section.
+
+Controls that only influence the buffer layout can be modified at any time
+when the stream is stopped. As they don't influence the buffer size, no
+special handling is needed to synchronize those controls with buffer
+allocation.
+
+Formats and controls that influence the buffer size interact with buffer
+allocation. The simplest way to handle this is for drivers to always require
+buffers to be reallocated in order to change those formats or controls. In
+that case, to perform such changes, userspace applications shall first stop
+the video stream with the :c:func:`VIDIOC_STREAMOFF` ioctl if it is running
+and free all buffers with the :c:func:`VIDIOC_REQBUFS` ioctl if they are
+allocated. The format or controls can then be modified, and buffers shall then
+be reallocated and the stream restarted. A typical ioctl sequence is
+
+ #. VIDIOC_STREAMOFF
+ #. VIDIOC_REQBUFS(0)
+ #. VIDIOC_S_EXT_CTRLS
+ #. VIDIOC_S_FMT
+ #. VIDIOC_REQBUFS(n)
+ #. VIDIOC_QBUF
+ #. VIDIOC_STREAMON
+
+The second :c:func:`VIDIOC_REQBUFS` call will take the new format and control
+value into account to compute the buffer size to allocate. Applications can
+also retrieve the size by calling the :c:func:`VIDIOC_G_FMT` ioctl if needed.
+
+.. note::
+
+ The API doesn't mandate the above order for control (3.) and format (4.)
+ changes. Format and controls can be set in a different order, or even
+ interleaved, depending on the device and use case. For instance some
+ controls might behave differently for different pixel formats, in which
+ case the format might need to be set first.
+
+When reallocation is required, any attempt to modify format or controls that
+influences the buffer size while buffers are allocated shall cause the format
+or control set ioctl to return the ``EBUSY`` error. Any attempt to queue a
+buffer too small for the current format or controls shall cause the
+:c:func:`VIDIOC_QBUF` ioctl to return a ``EINVAL`` error.
+
+Buffer reallocation is an expensive operation. To avoid that cost, drivers can
+(and are encouraged to) allow format or controls that influence the buffer
+size to be changed with buffers allocated. In that case, a typical ioctl
+sequence to modify format and controls is
+
+ #. VIDIOC_STREAMOFF
+ #. VIDIOC_S_EXT_CTRLS
+ #. VIDIOC_S_FMT
+ #. VIDIOC_QBUF
+ #. VIDIOC_STREAMON
+
+For this sequence to operate correctly, queued buffers need to be large enough
+for the new format or controls. Drivers shall return a ``ENOSPC`` error in
+response to format change (:c:func:`VIDIOC_S_FMT`) or control changes
+(:c:func:`VIDIOC_S_CTRL` or :c:func:`VIDIOC_S_EXT_CTRLS`) if buffers too small
+for the new format are currently queued. As a simplification, drivers are
+allowed to return a ``EBUSY`` error from these ioctls if any buffer is
+currently queued, without checking the queued buffers sizes.
+
+Additionally, drivers shall return a ``EINVAL`` error from the
+:c:func:`VIDIOC_QBUF` ioctl if the buffer being queued is too small for the
+current format or controls. Together, these requirements ensure that queued
+buffers will always be large enough for the configured format and controls.
+
+Userspace applications can query the buffer size required for a given format
+and controls by first setting the desired control values and then trying the
+desired format. The :c:func:`VIDIOC_TRY_FMT` ioctl will return the required
+buffer size.
+
+ #. VIDIOC_S_EXT_CTRLS(x)
+ #. VIDIOC_TRY_FMT()
+ #. VIDIOC_S_EXT_CTRLS(y)
+ #. VIDIOC_TRY_FMT()
+
+The :c:func:`VIDIOC_CREATE_BUFS` ioctl can then be used to allocate buffers
+based on the queried sizes (for instance by allocating a set of buffers large
+enough for all the desired formats and controls, or by allocating separate set
+of appropriately sized buffers for each use case).
+
+
.. c:type:: v4l2_buffer
struct v4l2_buffer
--
2.11.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCHv4 02/15] v4l: vsp1: wpf: Implement rotation support
2017-04-10 19:26 [PATCHv4 00/15] R-Car VSP1 Histogram Support Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 01/15] v4l: Clearly document interactions between formats, controls and buffers Hans Verkuil
@ 2017-04-10 19:26 ` Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 03/15] v4l: Add metadata buffer type and format Hans Verkuil
` (14 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Hans Verkuil @ 2017-04-10 19:26 UTC (permalink / raw)
To: linux-media; +Cc: Laurent Pinchart, Sakari Ailus, Laurent Pinchart
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Some WPF instances, on Gen3 devices, can perform 90° rotation when
writing frames to memory. Implement support for this using the
V4L2_CID_ROTATE control.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
drivers/media/platform/vsp1/vsp1_rpf.c | 2 +-
drivers/media/platform/vsp1/vsp1_rwpf.c | 5 +
drivers/media/platform/vsp1/vsp1_rwpf.h | 7 +-
drivers/media/platform/vsp1/vsp1_video.c | 12 +-
drivers/media/platform/vsp1/vsp1_wpf.c | 205 +++++++++++++++++++++++--------
5 files changed, 177 insertions(+), 54 deletions(-)
diff --git a/drivers/media/platform/vsp1/vsp1_rpf.c b/drivers/media/platform/vsp1/vsp1_rpf.c
index f5a9a4c8c74d..8feddd59cf8d 100644
--- a/drivers/media/platform/vsp1/vsp1_rpf.c
+++ b/drivers/media/platform/vsp1/vsp1_rpf.c
@@ -106,7 +106,7 @@ static void rpf_configure(struct vsp1_entity *entity,
* of the pipeline.
*/
output = vsp1_entity_get_pad_format(wpf, wpf->config,
- RWPF_PAD_SOURCE);
+ RWPF_PAD_SINK);
crop.width = pipe->partition.width * input_width
/ output->width;
diff --git a/drivers/media/platform/vsp1/vsp1_rwpf.c b/drivers/media/platform/vsp1/vsp1_rwpf.c
index 7d52c88a583e..cfd8f1904fa6 100644
--- a/drivers/media/platform/vsp1/vsp1_rwpf.c
+++ b/drivers/media/platform/vsp1/vsp1_rwpf.c
@@ -121,6 +121,11 @@ static int vsp1_rwpf_set_format(struct v4l2_subdev *subdev,
RWPF_PAD_SOURCE);
*format = fmt->format;
+ if (rwpf->flip.rotate) {
+ format->width = fmt->format.height;
+ format->height = fmt->format.width;
+ }
+
done:
mutex_unlock(&rwpf->entity.lock);
return ret;
diff --git a/drivers/media/platform/vsp1/vsp1_rwpf.h b/drivers/media/platform/vsp1/vsp1_rwpf.h
index 1c98aff3da5d..58215a7ab631 100644
--- a/drivers/media/platform/vsp1/vsp1_rwpf.h
+++ b/drivers/media/platform/vsp1/vsp1_rwpf.h
@@ -56,9 +56,14 @@ struct vsp1_rwpf {
struct {
spinlock_t lock;
- struct v4l2_ctrl *ctrls[2];
+ struct {
+ struct v4l2_ctrl *vflip;
+ struct v4l2_ctrl *hflip;
+ struct v4l2_ctrl *rotate;
+ } ctrls;
unsigned int pending;
unsigned int active;
+ bool rotate;
} flip;
struct vsp1_rwpf_memory mem;
diff --git a/drivers/media/platform/vsp1/vsp1_video.c b/drivers/media/platform/vsp1/vsp1_video.c
index 5239e08fabc3..795a3ca9ca03 100644
--- a/drivers/media/platform/vsp1/vsp1_video.c
+++ b/drivers/media/platform/vsp1/vsp1_video.c
@@ -187,9 +187,13 @@ static void vsp1_video_pipeline_setup_partitions(struct vsp1_pipeline *pipe)
struct vsp1_entity *entity;
unsigned int div_size;
+ /*
+ * Partitions are computed on the size before rotation, use the format
+ * at the WPF sink.
+ */
format = vsp1_entity_get_pad_format(&pipe->output->entity,
pipe->output->entity.config,
- RWPF_PAD_SOURCE);
+ RWPF_PAD_SINK);
div_size = format->width;
/* Gen2 hardware doesn't require image partitioning. */
@@ -229,9 +233,13 @@ static struct v4l2_rect vsp1_video_partition(struct vsp1_pipeline *pipe,
struct v4l2_rect partition;
unsigned int modulus;
+ /*
+ * Partitions are computed on the size before rotation, use the format
+ * at the WPF sink.
+ */
format = vsp1_entity_get_pad_format(&pipe->output->entity,
pipe->output->entity.config,
- RWPF_PAD_SOURCE);
+ RWPF_PAD_SINK);
/* A single partition simply processes the output size in full. */
if (pipe->partitions <= 1) {
diff --git a/drivers/media/platform/vsp1/vsp1_wpf.c b/drivers/media/platform/vsp1/vsp1_wpf.c
index 25a2ed6e2e18..32df109b119f 100644
--- a/drivers/media/platform/vsp1/vsp1_wpf.c
+++ b/drivers/media/platform/vsp1/vsp1_wpf.c
@@ -43,32 +43,90 @@ static inline void vsp1_wpf_write(struct vsp1_rwpf *wpf,
enum wpf_flip_ctrl {
WPF_CTRL_VFLIP = 0,
WPF_CTRL_HFLIP = 1,
- WPF_CTRL_MAX,
};
+static int vsp1_wpf_set_rotation(struct vsp1_rwpf *wpf, unsigned int rotation)
+{
+ struct vsp1_video *video = wpf->video;
+ struct v4l2_mbus_framefmt *sink_format;
+ struct v4l2_mbus_framefmt *source_format;
+ bool rotate;
+ int ret = 0;
+
+ /*
+ * Only consider the 0°/180° from/to 90°/270° modifications, the rest
+ * is taken care of by the flipping configuration.
+ */
+ rotate = rotation == 90 || rotation == 270;
+ if (rotate == wpf->flip.rotate)
+ return 0;
+
+ /* Changing rotation isn't allowed when buffers are allocated. */
+ mutex_lock(&video->lock);
+
+ if (vb2_is_busy(&video->queue)) {
+ ret = -EBUSY;
+ goto done;
+ }
+
+ sink_format = vsp1_entity_get_pad_format(&wpf->entity,
+ wpf->entity.config,
+ RWPF_PAD_SINK);
+ source_format = vsp1_entity_get_pad_format(&wpf->entity,
+ wpf->entity.config,
+ RWPF_PAD_SOURCE);
+
+ mutex_lock(&wpf->entity.lock);
+
+ if (rotate) {
+ source_format->width = sink_format->height;
+ source_format->height = sink_format->width;
+ } else {
+ source_format->width = sink_format->width;
+ source_format->height = sink_format->height;
+ }
+
+ wpf->flip.rotate = rotate;
+
+ mutex_unlock(&wpf->entity.lock);
+
+done:
+ mutex_unlock(&video->lock);
+ return ret;
+}
+
static int vsp1_wpf_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct vsp1_rwpf *wpf =
container_of(ctrl->handler, struct vsp1_rwpf, ctrls);
- unsigned int i;
+ unsigned int rotation;
u32 flip = 0;
+ int ret;
- switch (ctrl->id) {
- case V4L2_CID_HFLIP:
- case V4L2_CID_VFLIP:
- for (i = 0; i < WPF_CTRL_MAX; ++i) {
- if (wpf->flip.ctrls[i])
- flip |= wpf->flip.ctrls[i]->val ? BIT(i) : 0;
- }
+ /* Update the rotation. */
+ rotation = wpf->flip.ctrls.rotate ? wpf->flip.ctrls.rotate->val : 0;
+ ret = vsp1_wpf_set_rotation(wpf, rotation);
+ if (ret < 0)
+ return ret;
- spin_lock_irq(&wpf->flip.lock);
- wpf->flip.pending = flip;
- spin_unlock_irq(&wpf->flip.lock);
- break;
+ /*
+ * Compute the flip value resulting from all three controls, with
+ * rotation by 180° flipping the image in both directions. Store the
+ * result in the pending flip field for the next frame that will be
+ * processed.
+ */
+ if (wpf->flip.ctrls.vflip->val)
+ flip |= BIT(WPF_CTRL_VFLIP);
- default:
- return -EINVAL;
- }
+ if (wpf->flip.ctrls.hflip && wpf->flip.ctrls.hflip->val)
+ flip |= BIT(WPF_CTRL_HFLIP);
+
+ if (rotation == 180 || rotation == 270)
+ flip ^= BIT(WPF_CTRL_VFLIP) | BIT(WPF_CTRL_HFLIP);
+
+ spin_lock_irq(&wpf->flip.lock);
+ wpf->flip.pending = flip;
+ spin_unlock_irq(&wpf->flip.lock);
return 0;
}
@@ -89,10 +147,10 @@ static int wpf_init_controls(struct vsp1_rwpf *wpf)
num_flip_ctrls = 0;
} else if (vsp1->info->features & VSP1_HAS_WPF_HFLIP) {
/*
- * When horizontal flip is supported the WPF implements two
- * controls (horizontal flip and vertical flip).
+ * When horizontal flip is supported the WPF implements three
+ * controls (horizontal flip, vertical flip and rotation).
*/
- num_flip_ctrls = 2;
+ num_flip_ctrls = 3;
} else if (vsp1->info->features & VSP1_HAS_WPF_VFLIP) {
/*
* When only vertical flip is supported the WPF implements a
@@ -107,17 +165,19 @@ static int wpf_init_controls(struct vsp1_rwpf *wpf)
vsp1_rwpf_init_ctrls(wpf, num_flip_ctrls);
if (num_flip_ctrls >= 1) {
- wpf->flip.ctrls[WPF_CTRL_VFLIP] =
+ wpf->flip.ctrls.vflip =
v4l2_ctrl_new_std(&wpf->ctrls, &vsp1_wpf_ctrl_ops,
V4L2_CID_VFLIP, 0, 1, 1, 0);
}
- if (num_flip_ctrls == 2) {
- wpf->flip.ctrls[WPF_CTRL_HFLIP] =
+ if (num_flip_ctrls == 3) {
+ wpf->flip.ctrls.hflip =
v4l2_ctrl_new_std(&wpf->ctrls, &vsp1_wpf_ctrl_ops,
V4L2_CID_HFLIP, 0, 1, 1, 0);
-
- v4l2_ctrl_cluster(2, wpf->flip.ctrls);
+ wpf->flip.ctrls.rotate =
+ v4l2_ctrl_new_std(&wpf->ctrls, &vsp1_wpf_ctrl_ops,
+ V4L2_CID_ROTATE, 0, 270, 90, 0);
+ v4l2_ctrl_cluster(3, &wpf->flip.ctrls.vflip);
}
if (wpf->ctrls.error) {
@@ -222,8 +282,8 @@ static void wpf_configure(struct vsp1_entity *entity,
const struct vsp1_format_info *fmtinfo = wpf->fmtinfo;
struct vsp1_rwpf_memory mem = wpf->mem;
unsigned int flip = wpf->flip.active;
- unsigned int width = source_format->width;
- unsigned int height = source_format->height;
+ unsigned int width = sink_format->width;
+ unsigned int height = sink_format->height;
unsigned int offset;
/*
@@ -246,45 +306,78 @@ static void wpf_configure(struct vsp1_entity *entity,
/*
* Update the memory offsets based on flipping configuration.
* The destination addresses point to the locations where the
- * VSP starts writing to memory, which can be different corners
- * of the image depending on vertical flipping.
+ * VSP starts writing to memory, which can be any corner of the
+ * image depending on the combination of flipping and rotation.
*/
- if (pipe->partitions > 1) {
- const struct vsp1_format_info *fmtinfo = wpf->fmtinfo;
- /*
- * Horizontal flipping is handled through a line buffer
- * and doesn't modify the start address, but still needs
- * to be handled when image partitioning is in effect to
- * order the partitions correctly.
- */
- if (flip & BIT(WPF_CTRL_HFLIP))
- offset = format->width - pipe->partition.left
- - pipe->partition.width;
+ /*
+ * First take the partition left coordinate into account.
+ * Compute the offset to order the partitions correctly on the
+ * output based on whether flipping is enabled. Consider
+ * horizontal flipping when rotation is disabled but vertical
+ * flipping when rotation is enabled, as rotating the image
+ * switches the horizontal and vertical directions. The offset
+ * is applied horizontally or vertically accordingly.
+ */
+ if (flip & BIT(WPF_CTRL_HFLIP) && !wpf->flip.rotate)
+ offset = format->width - pipe->partition.left
+ - pipe->partition.width;
+ else if (flip & BIT(WPF_CTRL_VFLIP) && wpf->flip.rotate)
+ offset = format->height - pipe->partition.left
+ - pipe->partition.width;
+ else
+ offset = pipe->partition.left;
+
+ for (i = 0; i < format->num_planes; ++i) {
+ unsigned int hsub = i > 0 ? fmtinfo->hsub : 1;
+ unsigned int vsub = i > 0 ? fmtinfo->vsub : 1;
+
+ if (wpf->flip.rotate)
+ mem.addr[i] += offset / vsub
+ * format->plane_fmt[i].bytesperline;
else
- offset = pipe->partition.left;
-
- mem.addr[0] += offset * fmtinfo->bpp[0] / 8;
- if (format->num_planes > 1) {
- mem.addr[1] += offset / fmtinfo->hsub
- * fmtinfo->bpp[1] / 8;
- mem.addr[2] += offset / fmtinfo->hsub
- * fmtinfo->bpp[2] / 8;
- }
+ mem.addr[i] += offset / hsub
+ * fmtinfo->bpp[i] / 8;
}
if (flip & BIT(WPF_CTRL_VFLIP)) {
- mem.addr[0] += (format->height - 1)
+ /*
+ * When rotating the output (after rotation) image
+ * height is equal to the partition width (before
+ * rotation). Otherwise it is equal to the output
+ * image height.
+ */
+ if (wpf->flip.rotate)
+ height = pipe->partition.width;
+ else
+ height = format->height;
+
+ mem.addr[0] += (height - 1)
* format->plane_fmt[0].bytesperline;
if (format->num_planes > 1) {
- offset = (format->height / wpf->fmtinfo->vsub - 1)
+ offset = (height / fmtinfo->vsub - 1)
* format->plane_fmt[1].bytesperline;
mem.addr[1] += offset;
mem.addr[2] += offset;
}
}
+ if (wpf->flip.rotate && !(flip & BIT(WPF_CTRL_HFLIP))) {
+ unsigned int hoffset = max(0, (int)format->width - 16);
+
+ /*
+ * Compute the output coordinate. The partition
+ * horizontal (left) offset becomes a vertical offset.
+ */
+ for (i = 0; i < format->num_planes; ++i) {
+ unsigned int hsub = i > 0 ? fmtinfo->hsub : 1;
+
+ mem.addr[i] += hoffset / hsub
+ * fmtinfo->bpp[i] / 8;
+ }
+ }
+
/*
* On Gen3 hardware the SPUVS bit has no effect on 3-planar
* formats. Swap the U and V planes manually in that case.
@@ -306,6 +399,9 @@ static void wpf_configure(struct vsp1_entity *entity,
outfmt = fmtinfo->hwfmt << VI6_WPF_OUTFMT_WRFMT_SHIFT;
+ if (wpf->flip.rotate)
+ outfmt |= VI6_WPF_OUTFMT_ROT;
+
if (fmtinfo->alpha)
outfmt |= VI6_WPF_OUTFMT_PXA;
if (fmtinfo->swap_yc)
@@ -367,9 +463,18 @@ static void wpf_configure(struct vsp1_entity *entity,
VI6_WFP_IRQ_ENB_DFEE);
}
+static unsigned int wpf_max_width(struct vsp1_entity *entity,
+ struct vsp1_pipeline *pipe)
+{
+ struct vsp1_rwpf *wpf = to_rwpf(&entity->subdev);
+
+ return wpf->flip.rotate ? 256 : wpf->max_width;
+}
+
static const struct vsp1_entity_operations wpf_entity_ops = {
.destroy = vsp1_wpf_destroy,
.configure = wpf_configure,
+ .max_width = wpf_max_width,
};
/* -----------------------------------------------------------------------------
--
2.11.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCHv4 03/15] v4l: Add metadata buffer type and format
2017-04-10 19:26 [PATCHv4 00/15] R-Car VSP1 Histogram Support Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 01/15] v4l: Clearly document interactions between formats, controls and buffers Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 02/15] v4l: vsp1: wpf: Implement rotation support Hans Verkuil
@ 2017-04-10 19:26 ` Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 04/15] v4l: vsp1: Add histogram support Hans Verkuil
` (13 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Hans Verkuil @ 2017-04-10 19:26 UTC (permalink / raw)
To: linux-media; +Cc: Laurent Pinchart, Sakari Ailus, Laurent Pinchart
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The metadata buffer type is used to transfer metadata between userspace
and kernelspace through a V4L2 buffers queue. It comes with a new
metadata capture capability and format description.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: removed left-over 'experimental' note]
[hans.verkuil@cisco.com: add newline after _v4l2-meta-format label]
---
Documentation/media/uapi/v4l/buffer.rst | 3 ++
Documentation/media/uapi/v4l/dev-meta.rst | 58 ++++++++++++++++++++++++
Documentation/media/uapi/v4l/devices.rst | 1 +
Documentation/media/uapi/v4l/vidioc-querycap.rst | 3 ++
Documentation/media/videodev2.h.rst.exceptions | 2 +
drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 19 ++++++++
drivers/media/v4l2-core/v4l2-dev.c | 16 ++++---
drivers/media/v4l2-core/v4l2-ioctl.c | 34 ++++++++++++++
drivers/media/v4l2-core/videobuf2-v4l2.c | 3 ++
include/media/v4l2-ioctl.h | 17 +++++++
include/trace/events/v4l2.h | 1 +
include/uapi/linux/videodev2.h | 13 ++++++
12 files changed, 164 insertions(+), 6 deletions(-)
create mode 100644 Documentation/media/uapi/v4l/dev-meta.rst
diff --git a/Documentation/media/uapi/v4l/buffer.rst b/Documentation/media/uapi/v4l/buffer.rst
index d1e0d55dc219..64613d935edd 100644
--- a/Documentation/media/uapi/v4l/buffer.rst
+++ b/Documentation/media/uapi/v4l/buffer.rst
@@ -440,6 +440,9 @@ enum v4l2_buf_type
- 12
- Buffer for Software Defined Radio (SDR) output stream, see
:ref:`sdr`.
+ * - ``V4L2_BUF_TYPE_META_CAPTURE``
+ - 13
+ - Buffer for metadata capture, see :ref:`metadata`.
diff --git a/Documentation/media/uapi/v4l/dev-meta.rst b/Documentation/media/uapi/v4l/dev-meta.rst
new file mode 100644
index 000000000000..62518adfe37b
--- /dev/null
+++ b/Documentation/media/uapi/v4l/dev-meta.rst
@@ -0,0 +1,58 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _metadata:
+
+******************
+Metadata Interface
+******************
+
+Metadata refers to any non-image data that supplements video frames with
+additional information. This may include statistics computed over the image
+or frame capture parameters supplied by the image source. This interface is
+intended for transfer of metadata to userspace and control of that operation.
+
+The metadata interface is implemented on video capture device nodes. The device
+can be dedicated to metadata or can implement both video and metadata capture
+as specified in its reported capabilities.
+
+Querying Capabilities
+=====================
+
+Device nodes supporting the metadata interface set the ``V4L2_CAP_META_CAPTURE``
+flag in the ``device_caps`` field of the
+:c:type:`v4l2_capability` structure returned by the :c:func:`VIDIOC_QUERYCAP`
+ioctl. That flag means the device can capture metadata to memory.
+
+At least one of the read/write or streaming I/O methods must be supported.
+
+
+Data Format Negotiation
+=======================
+
+The metadata device uses the :ref:`format` ioctls to select the capture format.
+The metadata buffer content format is bound to that selected format. In addition
+to the basic :ref:`format` ioctls, the :c:func:`VIDIOC_ENUM_FMT` ioctl must be
+supported as well.
+
+To use the :ref:`format` ioctls applications set the ``type`` field of the
+:c:type:`v4l2_format` structure to ``V4L2_BUF_TYPE_META_CAPTURE`` and use the
+:c:type:`v4l2_meta_format` ``meta`` member of the ``fmt`` union as needed per
+the desired operation. Both drivers and applications must set the remainder of
+the :c:type:`v4l2_format` structure to 0.
+
+.. _v4l2-meta-format:
+
+.. flat-table:: struct v4l2_meta_format
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u32
+ - ``dataformat``
+ - The data format, set by the application. This is a little endian
+ :ref:`four character code <v4l2-fourcc>`. V4L2 defines metadata formats
+ in :ref:`meta-formats`.
+ * - __u32
+ - ``buffersize``
+ - Maximum buffer size in bytes required for data. The value is set by the
+ driver.
diff --git a/Documentation/media/uapi/v4l/devices.rst b/Documentation/media/uapi/v4l/devices.rst
index 5c3d6c29e12c..fb7f8c26cf09 100644
--- a/Documentation/media/uapi/v4l/devices.rst
+++ b/Documentation/media/uapi/v4l/devices.rst
@@ -25,3 +25,4 @@ Interfaces
dev-touch
dev-event
dev-subdev
+ dev-meta
diff --git a/Documentation/media/uapi/v4l/vidioc-querycap.rst b/Documentation/media/uapi/v4l/vidioc-querycap.rst
index 165d8314327e..12e0d9a63cd8 100644
--- a/Documentation/media/uapi/v4l/vidioc-querycap.rst
+++ b/Documentation/media/uapi/v4l/vidioc-querycap.rst
@@ -236,6 +236,9 @@ specification the ioctl returns an ``EINVAL`` error code.
* - ``V4L2_CAP_SDR_OUTPUT``
- 0x00400000
- The device supports the :ref:`SDR Output <sdr>` interface.
+ * - ``V4L2_CAP_META_CAPTURE``
+ - 0x00800000
+ - The device supports the :ref:`metadata` capture interface.
* - ``V4L2_CAP_READWRITE``
- 0x01000000
- The device supports the :ref:`read() <rw>` and/or
diff --git a/Documentation/media/videodev2.h.rst.exceptions b/Documentation/media/videodev2.h.rst.exceptions
index e11a0d0a8931..c9c611b18ba1 100644
--- a/Documentation/media/videodev2.h.rst.exceptions
+++ b/Documentation/media/videodev2.h.rst.exceptions
@@ -27,6 +27,7 @@ replace symbol V4L2_FIELD_SEQ_TB :c:type:`v4l2_field`
replace symbol V4L2_FIELD_TOP :c:type:`v4l2_field`
# Documented enum v4l2_buf_type
+replace symbol V4L2_BUF_TYPE_META_CAPTURE :c:type:`v4l2_buf_type`
replace symbol V4L2_BUF_TYPE_SDR_CAPTURE :c:type:`v4l2_buf_type`
replace symbol V4L2_BUF_TYPE_SDR_OUTPUT :c:type:`v4l2_buf_type`
replace symbol V4L2_BUF_TYPE_SLICED_VBI_CAPTURE :c:type:`v4l2_buf_type`
@@ -152,6 +153,7 @@ replace define V4L2_CAP_MODULATOR device-capabilities
replace define V4L2_CAP_SDR_CAPTURE device-capabilities
replace define V4L2_CAP_EXT_PIX_FORMAT device-capabilities
replace define V4L2_CAP_SDR_OUTPUT device-capabilities
+replace define V4L2_CAP_META_CAPTURE device-capabilities
replace define V4L2_CAP_READWRITE device-capabilities
replace define V4L2_CAP_ASYNCIO device-capabilities
replace define V4L2_CAP_STREAMING device-capabilities
diff --git a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
index 77b8a2dcfcdf..6f52970f8b54 100644
--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -161,6 +161,20 @@ static inline int put_v4l2_sdr_format(struct v4l2_sdr_format *kp, struct v4l2_sd
return 0;
}
+static inline int get_v4l2_meta_format(struct v4l2_meta_format *kp, struct v4l2_meta_format __user *up)
+{
+ if (copy_from_user(kp, up, sizeof(struct v4l2_meta_format)))
+ return -EFAULT;
+ return 0;
+}
+
+static inline int put_v4l2_meta_format(struct v4l2_meta_format *kp, struct v4l2_meta_format __user *up)
+{
+ if (copy_to_user(up, kp, sizeof(struct v4l2_meta_format)))
+ return -EFAULT;
+ return 0;
+}
+
struct v4l2_format32 {
__u32 type; /* enum v4l2_buf_type */
union {
@@ -170,6 +184,7 @@ struct v4l2_format32 {
struct v4l2_vbi_format vbi;
struct v4l2_sliced_vbi_format sliced;
struct v4l2_sdr_format sdr;
+ struct v4l2_meta_format meta;
__u8 raw_data[200]; /* user-defined */
} fmt;
};
@@ -216,6 +231,8 @@ static int __get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __us
case V4L2_BUF_TYPE_SDR_CAPTURE:
case V4L2_BUF_TYPE_SDR_OUTPUT:
return get_v4l2_sdr_format(&kp->fmt.sdr, &up->fmt.sdr);
+ case V4L2_BUF_TYPE_META_CAPTURE:
+ return get_v4l2_meta_format(&kp->fmt.meta, &up->fmt.meta);
default:
pr_info("compat_ioctl32: unexpected VIDIOC_FMT type %d\n",
kp->type);
@@ -263,6 +280,8 @@ static int __put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __us
case V4L2_BUF_TYPE_SDR_CAPTURE:
case V4L2_BUF_TYPE_SDR_OUTPUT:
return put_v4l2_sdr_format(&kp->fmt.sdr, &up->fmt.sdr);
+ case V4L2_BUF_TYPE_META_CAPTURE:
+ return put_v4l2_meta_format(&kp->fmt.meta, &up->fmt.meta);
default:
pr_info("compat_ioctl32: unexpected VIDIOC_FMT type %d\n",
kp->type);
diff --git a/drivers/media/v4l2-core/v4l2-dev.c b/drivers/media/v4l2-core/v4l2-dev.c
index fa2124cb31bd..c647ba648805 100644
--- a/drivers/media/v4l2-core/v4l2-dev.c
+++ b/drivers/media/v4l2-core/v4l2-dev.c
@@ -575,30 +575,34 @@ static void determine_valid_ioctls(struct video_device *vdev)
set_bit(_IOC_NR(VIDIOC_ENUM_FREQ_BANDS), valid_ioctls);
if (is_vid || is_tch) {
- /* video specific ioctls */
+ /* video and metadata specific ioctls */
if ((is_rx && (ops->vidioc_enum_fmt_vid_cap ||
ops->vidioc_enum_fmt_vid_cap_mplane ||
- ops->vidioc_enum_fmt_vid_overlay)) ||
+ ops->vidioc_enum_fmt_vid_overlay ||
+ ops->vidioc_enum_fmt_meta_cap)) ||
(is_tx && (ops->vidioc_enum_fmt_vid_out ||
ops->vidioc_enum_fmt_vid_out_mplane)))
set_bit(_IOC_NR(VIDIOC_ENUM_FMT), valid_ioctls);
if ((is_rx && (ops->vidioc_g_fmt_vid_cap ||
ops->vidioc_g_fmt_vid_cap_mplane ||
- ops->vidioc_g_fmt_vid_overlay)) ||
+ ops->vidioc_g_fmt_vid_overlay ||
+ ops->vidioc_g_fmt_meta_cap)) ||
(is_tx && (ops->vidioc_g_fmt_vid_out ||
ops->vidioc_g_fmt_vid_out_mplane ||
ops->vidioc_g_fmt_vid_out_overlay)))
set_bit(_IOC_NR(VIDIOC_G_FMT), valid_ioctls);
if ((is_rx && (ops->vidioc_s_fmt_vid_cap ||
ops->vidioc_s_fmt_vid_cap_mplane ||
- ops->vidioc_s_fmt_vid_overlay)) ||
+ ops->vidioc_s_fmt_vid_overlay ||
+ ops->vidioc_s_fmt_meta_cap)) ||
(is_tx && (ops->vidioc_s_fmt_vid_out ||
ops->vidioc_s_fmt_vid_out_mplane ||
ops->vidioc_s_fmt_vid_out_overlay)))
set_bit(_IOC_NR(VIDIOC_S_FMT), valid_ioctls);
if ((is_rx && (ops->vidioc_try_fmt_vid_cap ||
ops->vidioc_try_fmt_vid_cap_mplane ||
- ops->vidioc_try_fmt_vid_overlay)) ||
+ ops->vidioc_try_fmt_vid_overlay ||
+ ops->vidioc_try_fmt_meta_cap)) ||
(is_tx && (ops->vidioc_try_fmt_vid_out ||
ops->vidioc_try_fmt_vid_out_mplane ||
ops->vidioc_try_fmt_vid_out_overlay)))
@@ -664,7 +668,7 @@ static void determine_valid_ioctls(struct video_device *vdev)
}
if (is_vid || is_vbi || is_sdr || is_tch) {
- /* ioctls valid for video, vbi or sdr */
+ /* ioctls valid for video, metadata, vbi or sdr */
SET_VALID_IOCTL(ops, VIDIOC_REQBUFS, vidioc_reqbufs);
SET_VALID_IOCTL(ops, VIDIOC_QUERYBUF, vidioc_querybuf);
SET_VALID_IOCTL(ops, VIDIOC_QBUF, vidioc_qbuf);
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index 93e8f42b0d63..dec6b120a5a2 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -155,6 +155,7 @@ const char *v4l2_type_names[] = {
[V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE] = "vid-out-mplane",
[V4L2_BUF_TYPE_SDR_CAPTURE] = "sdr-cap",
[V4L2_BUF_TYPE_SDR_OUTPUT] = "sdr-out",
+ [V4L2_BUF_TYPE_META_CAPTURE] = "meta-cap",
};
EXPORT_SYMBOL(v4l2_type_names);
@@ -246,6 +247,7 @@ static void v4l_print_format(const void *arg, bool write_only)
const struct v4l2_sliced_vbi_format *sliced;
const struct v4l2_window *win;
const struct v4l2_sdr_format *sdr;
+ const struct v4l2_meta_format *meta;
unsigned i;
pr_cont("type=%s", prt_names(p->type, v4l2_type_names));
@@ -325,6 +327,15 @@ static void v4l_print_format(const void *arg, bool write_only)
(sdr->pixelformat >> 16) & 0xff,
(sdr->pixelformat >> 24) & 0xff);
break;
+ case V4L2_BUF_TYPE_META_CAPTURE:
+ meta = &p->fmt.meta;
+ pr_cont(", dataformat=%c%c%c%c, buffersize=%u\n",
+ (meta->dataformat >> 0) & 0xff,
+ (meta->dataformat >> 8) & 0xff,
+ (meta->dataformat >> 16) & 0xff,
+ (meta->dataformat >> 24) & 0xff,
+ meta->buffersize);
+ break;
}
}
@@ -943,6 +954,10 @@ static int check_fmt(struct file *file, enum v4l2_buf_type type)
if (is_sdr && is_tx && ops->vidioc_g_fmt_sdr_out)
return 0;
break;
+ case V4L2_BUF_TYPE_META_CAPTURE:
+ if (is_vid && is_rx && ops->vidioc_g_fmt_meta_cap)
+ return 0;
+ break;
default:
break;
}
@@ -1327,6 +1342,11 @@ static int v4l_enum_fmt(const struct v4l2_ioctl_ops *ops,
break;
ret = ops->vidioc_enum_fmt_sdr_out(file, fh, arg);
break;
+ case V4L2_BUF_TYPE_META_CAPTURE:
+ if (unlikely(!is_rx || !is_vid || !ops->vidioc_enum_fmt_meta_cap))
+ break;
+ ret = ops->vidioc_enum_fmt_meta_cap(file, fh, arg);
+ break;
}
if (ret == 0)
v4l_fill_fmtdesc(p);
@@ -1426,6 +1446,10 @@ static int v4l_g_fmt(const struct v4l2_ioctl_ops *ops,
if (unlikely(!is_tx || !is_sdr || !ops->vidioc_g_fmt_sdr_out))
break;
return ops->vidioc_g_fmt_sdr_out(file, fh, arg);
+ case V4L2_BUF_TYPE_META_CAPTURE:
+ if (unlikely(!is_rx || !is_vid || !ops->vidioc_g_fmt_meta_cap))
+ break;
+ return ops->vidioc_g_fmt_meta_cap(file, fh, arg);
}
return -EINVAL;
}
@@ -1531,6 +1555,11 @@ static int v4l_s_fmt(const struct v4l2_ioctl_ops *ops,
break;
CLEAR_AFTER_FIELD(p, fmt.sdr);
return ops->vidioc_s_fmt_sdr_out(file, fh, arg);
+ case V4L2_BUF_TYPE_META_CAPTURE:
+ if (unlikely(!is_rx || !is_vid || !ops->vidioc_s_fmt_meta_cap))
+ break;
+ CLEAR_AFTER_FIELD(p, fmt.meta);
+ return ops->vidioc_s_fmt_meta_cap(file, fh, arg);
}
return -EINVAL;
}
@@ -1616,6 +1645,11 @@ static int v4l_try_fmt(const struct v4l2_ioctl_ops *ops,
break;
CLEAR_AFTER_FIELD(p, fmt.sdr);
return ops->vidioc_try_fmt_sdr_out(file, fh, arg);
+ case V4L2_BUF_TYPE_META_CAPTURE:
+ if (unlikely(!is_rx || !is_vid || !ops->vidioc_try_fmt_meta_cap))
+ break;
+ CLEAR_AFTER_FIELD(p, fmt.meta);
+ return ops->vidioc_try_fmt_meta_cap(file, fh, arg);
}
return -EINVAL;
}
diff --git a/drivers/media/v4l2-core/videobuf2-v4l2.c b/drivers/media/v4l2-core/videobuf2-v4l2.c
index 3529849d2218..0c0669976bdc 100644
--- a/drivers/media/v4l2-core/videobuf2-v4l2.c
+++ b/drivers/media/v4l2-core/videobuf2-v4l2.c
@@ -544,6 +544,9 @@ int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create)
case V4L2_BUF_TYPE_SDR_OUTPUT:
requested_sizes[0] = f->fmt.sdr.buffersize;
break;
+ case V4L2_BUF_TYPE_META_CAPTURE:
+ requested_sizes[0] = f->fmt.meta.buffersize;
+ break;
default:
return -EINVAL;
}
diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h
index 6cd94e5ee113..bd5312118013 100644
--- a/include/media/v4l2-ioctl.h
+++ b/include/media/v4l2-ioctl.h
@@ -44,6 +44,9 @@ struct v4l2_fh;
* @vidioc_enum_fmt_sdr_out: pointer to the function that implements
* :ref:`VIDIOC_ENUM_FMT <vidioc_enum_fmt>` ioctl logic
* for Software Defined Radio output
+ * @vidioc_enum_fmt_meta_cap: pointer to the function that implements
+ * :ref:`VIDIOC_ENUM_FMT <vidioc_enum_fmt>` ioctl logic
+ * for metadata capture
* @vidioc_g_fmt_vid_cap: pointer to the function that implements
* :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for video capture
* in single plane mode
@@ -74,6 +77,8 @@ struct v4l2_fh;
* @vidioc_g_fmt_sdr_out: pointer to the function that implements
* :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for Software Defined
* Radio output
+ * @vidioc_g_fmt_meta_cap: pointer to the function that implements
+ * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for metadata capture
* @vidioc_s_fmt_vid_cap: pointer to the function that implements
* :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for video capture
* in single plane mode
@@ -104,6 +109,8 @@ struct v4l2_fh;
* @vidioc_s_fmt_sdr_out: pointer to the function that implements
* :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for Software Defined
* Radio output
+ * @vidioc_s_fmt_meta_cap: pointer to the function that implements
+ * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for metadata capture
* @vidioc_try_fmt_vid_cap: pointer to the function that implements
* :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for video capture
* in single plane mode
@@ -136,6 +143,8 @@ struct v4l2_fh;
* @vidioc_try_fmt_sdr_out: pointer to the function that implements
* :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for Software Defined
* Radio output
+ * @vidioc_try_fmt_meta_cap: pointer to the function that implements
+ * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for metadata capture
* @vidioc_reqbufs: pointer to the function that implements
* :ref:`VIDIOC_REQBUFS <vidioc_reqbufs>` ioctl
* @vidioc_querybuf: pointer to the function that implements
@@ -306,6 +315,8 @@ struct v4l2_ioctl_ops {
struct v4l2_fmtdesc *f);
int (*vidioc_enum_fmt_sdr_out)(struct file *file, void *fh,
struct v4l2_fmtdesc *f);
+ int (*vidioc_enum_fmt_meta_cap)(struct file *file, void *fh,
+ struct v4l2_fmtdesc *f);
/* VIDIOC_G_FMT handlers */
int (*vidioc_g_fmt_vid_cap)(struct file *file, void *fh,
@@ -332,6 +343,8 @@ struct v4l2_ioctl_ops {
struct v4l2_format *f);
int (*vidioc_g_fmt_sdr_out)(struct file *file, void *fh,
struct v4l2_format *f);
+ int (*vidioc_g_fmt_meta_cap)(struct file *file, void *fh,
+ struct v4l2_format *f);
/* VIDIOC_S_FMT handlers */
int (*vidioc_s_fmt_vid_cap)(struct file *file, void *fh,
@@ -358,6 +371,8 @@ struct v4l2_ioctl_ops {
struct v4l2_format *f);
int (*vidioc_s_fmt_sdr_out)(struct file *file, void *fh,
struct v4l2_format *f);
+ int (*vidioc_s_fmt_meta_cap)(struct file *file, void *fh,
+ struct v4l2_format *f);
/* VIDIOC_TRY_FMT handlers */
int (*vidioc_try_fmt_vid_cap)(struct file *file, void *fh,
@@ -384,6 +399,8 @@ struct v4l2_ioctl_ops {
struct v4l2_format *f);
int (*vidioc_try_fmt_sdr_out)(struct file *file, void *fh,
struct v4l2_format *f);
+ int (*vidioc_try_fmt_meta_cap)(struct file *file, void *fh,
+ struct v4l2_format *f);
/* Buffer handlers */
int (*vidioc_reqbufs)(struct file *file, void *fh,
diff --git a/include/trace/events/v4l2.h b/include/trace/events/v4l2.h
index ee7754c6e4a1..b3a85b3df53e 100644
--- a/include/trace/events/v4l2.h
+++ b/include/trace/events/v4l2.h
@@ -29,6 +29,7 @@
EM( V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE, "VIDEO_OUTPUT_MPLANE" ) \
EM( V4L2_BUF_TYPE_SDR_CAPTURE, "SDR_CAPTURE" ) \
EM( V4L2_BUF_TYPE_SDR_OUTPUT, "SDR_OUTPUT" ) \
+ EM( V4L2_BUF_TYPE_META_CAPTURE, "META_CAPTURE" ) \
EMe(V4L2_BUF_TYPE_PRIVATE, "PRIVATE" )
SHOW_TYPE
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 8d351f5df2aa..7078deef2c64 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -143,6 +143,7 @@ enum v4l2_buf_type {
V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE = 10,
V4L2_BUF_TYPE_SDR_CAPTURE = 11,
V4L2_BUF_TYPE_SDR_OUTPUT = 12,
+ V4L2_BUF_TYPE_META_CAPTURE = 13,
/* Deprecated, do not use */
V4L2_BUF_TYPE_PRIVATE = 0x80,
};
@@ -451,6 +452,7 @@ struct v4l2_capability {
#define V4L2_CAP_SDR_CAPTURE 0x00100000 /* Is a SDR capture device */
#define V4L2_CAP_EXT_PIX_FORMAT 0x00200000 /* Supports the extended pixel format */
#define V4L2_CAP_SDR_OUTPUT 0x00400000 /* Is a SDR output device */
+#define V4L2_CAP_META_CAPTURE 0x00800000 /* Is a metadata capture device */
#define V4L2_CAP_READWRITE 0x01000000 /* read/write systemcalls */
#define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */
@@ -2086,6 +2088,16 @@ struct v4l2_sdr_format {
} __attribute__ ((packed));
/**
+ * struct v4l2_meta_format - metadata format definition
+ * @dataformat: little endian four character code (fourcc)
+ * @buffersize: maximum size in bytes required for data
+ */
+struct v4l2_meta_format {
+ __u32 dataformat;
+ __u32 buffersize;
+} __attribute__ ((packed));
+
+/**
* struct v4l2_format - stream data format
* @type: enum v4l2_buf_type; type of the data stream
* @pix: definition of an image format
@@ -2104,6 +2116,7 @@ struct v4l2_format {
struct v4l2_vbi_format vbi; /* V4L2_BUF_TYPE_VBI_CAPTURE */
struct v4l2_sliced_vbi_format sliced; /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */
struct v4l2_sdr_format sdr; /* V4L2_BUF_TYPE_SDR_CAPTURE */
+ struct v4l2_meta_format meta; /* V4L2_BUF_TYPE_META_CAPTURE */
__u8 raw_data[200]; /* user-defined */
} fmt;
};
--
2.11.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCHv4 04/15] v4l: vsp1: Add histogram support
2017-04-10 19:26 [PATCHv4 00/15] R-Car VSP1 Histogram Support Hans Verkuil
` (2 preceding siblings ...)
2017-04-10 19:26 ` [PATCHv4 03/15] v4l: Add metadata buffer type and format Hans Verkuil
@ 2017-04-10 19:26 ` Hans Verkuil
2017-04-11 11:17 ` Mauro Carvalho Chehab
2017-04-10 19:26 ` [PATCHv4 05/15] v4l: vsp1: Support histogram generators in pipeline configuration Hans Verkuil
` (12 subsequent siblings)
16 siblings, 1 reply; 21+ messages in thread
From: Hans Verkuil @ 2017-04-10 19:26 UTC (permalink / raw)
To: linux-media; +Cc: Laurent Pinchart, Sakari Ailus, Laurent Pinchart
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The histogram common code will be used to implement support for both the
HGO and HGT histogram computation engines.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
drivers/media/platform/Kconfig | 1 +
drivers/media/platform/vsp1/Makefile | 1 +
drivers/media/platform/vsp1/vsp1_histo.c | 646 +++++++++++++++++++++++++++++++
drivers/media/platform/vsp1/vsp1_histo.h | 84 ++++
4 files changed, 732 insertions(+)
create mode 100644 drivers/media/platform/vsp1/vsp1_histo.c
create mode 100644 drivers/media/platform/vsp1/vsp1_histo.h
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 7321f6123659..552e7f2df6fd 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -420,6 +420,7 @@ config VIDEO_RENESAS_VSP1
depends on (ARCH_RENESAS && OF) || COMPILE_TEST
depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP
select VIDEOBUF2_DMA_CONTIG
+ select VIDEOBUF2_VMALLOC
---help---
This is a V4L2 driver for the Renesas VSP1 video processing engine.
diff --git a/drivers/media/platform/vsp1/Makefile b/drivers/media/platform/vsp1/Makefile
index 1328e1bd2143..c559536f7867 100644
--- a/drivers/media/platform/vsp1/Makefile
+++ b/drivers/media/platform/vsp1/Makefile
@@ -3,6 +3,7 @@ vsp1-y += vsp1_dl.o vsp1_drm.o vsp1_video.o
vsp1-y += vsp1_rpf.o vsp1_rwpf.o vsp1_wpf.o
vsp1-y += vsp1_clu.o vsp1_hsit.o vsp1_lut.o
vsp1-y += vsp1_bru.o vsp1_sru.o vsp1_uds.o
+vsp1-y += vsp1_histo.o
vsp1-y += vsp1_lif.o
obj-$(CONFIG_VIDEO_RENESAS_VSP1) += vsp1.o
diff --git a/drivers/media/platform/vsp1/vsp1_histo.c b/drivers/media/platform/vsp1/vsp1_histo.c
new file mode 100644
index 000000000000..afab77cf4fa5
--- /dev/null
+++ b/drivers/media/platform/vsp1/vsp1_histo.c
@@ -0,0 +1,646 @@
+/*
+ * vsp1_histo.c -- R-Car VSP1 Histogram API
+ *
+ * Copyright (C) 2016 Renesas Electronics Corporation
+ * Copyright (C) 2016 Laurent Pinchart
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/gfp.h>
+
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-subdev.h>
+#include <media/videobuf2-vmalloc.h>
+
+#include "vsp1.h"
+#include "vsp1_histo.h"
+#include "vsp1_pipe.h"
+
+#define HISTO_MIN_SIZE 4U
+#define HISTO_MAX_SIZE 8192U
+
+/* -----------------------------------------------------------------------------
+ * Buffer Operations
+ */
+
+static inline struct vsp1_histogram_buffer *
+to_vsp1_histogram_buffer(struct vb2_v4l2_buffer *vbuf)
+{
+ return container_of(vbuf, struct vsp1_histogram_buffer, buf);
+}
+
+struct vsp1_histogram_buffer *
+vsp1_histogram_buffer_get(struct vsp1_histogram *histo)
+{
+ struct vsp1_histogram_buffer *buf = NULL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&histo->irqlock, flags);
+
+ if (list_empty(&histo->irqqueue))
+ goto done;
+
+ buf = list_first_entry(&histo->irqqueue, struct vsp1_histogram_buffer,
+ queue);
+ list_del(&buf->queue);
+ histo->readout = true;
+
+done:
+ spin_unlock_irqrestore(&histo->irqlock, flags);
+ return buf;
+}
+
+void vsp1_histogram_buffer_complete(struct vsp1_histogram *histo,
+ struct vsp1_histogram_buffer *buf,
+ size_t size)
+{
+ struct vsp1_pipeline *pipe = histo->pipe;
+ unsigned long flags;
+
+ /*
+ * The pipeline pointer is guaranteed to be valid as this function is
+ * called from the frame completion interrupt handler, which can only
+ * occur when video streaming is active.
+ */
+ buf->buf.sequence = pipe->sequence;
+ buf->buf.vb2_buf.timestamp = ktime_get_ns();
+ vb2_set_plane_payload(&buf->buf.vb2_buf, 0, size);
+ vb2_buffer_done(&buf->buf.vb2_buf, VB2_BUF_STATE_DONE);
+
+ spin_lock_irqsave(&histo->irqlock, flags);
+ histo->readout = false;
+ wake_up(&histo->wait_queue);
+ spin_unlock_irqrestore(&histo->irqlock, flags);
+}
+
+/* -----------------------------------------------------------------------------
+ * videobuf2 Queue Operations
+ */
+
+static int histo_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
+ unsigned int *nplanes, unsigned int sizes[],
+ struct device *alloc_devs[])
+{
+ struct vsp1_histogram *histo = vb2_get_drv_priv(vq);
+
+ if (*nplanes) {
+ if (*nplanes != 1)
+ return -EINVAL;
+
+ if (sizes[0] < histo->data_size)
+ return -EINVAL;
+
+ return 0;
+ }
+
+ *nplanes = 1;
+ sizes[0] = histo->data_size;
+
+ return 0;
+}
+
+static int histo_buffer_prepare(struct vb2_buffer *vb)
+{
+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+ struct vsp1_histogram *histo = vb2_get_drv_priv(vb->vb2_queue);
+ struct vsp1_histogram_buffer *buf = to_vsp1_histogram_buffer(vbuf);
+
+ if (vb->num_planes != 1)
+ return -EINVAL;
+
+ if (vb2_plane_size(vb, 0) < histo->data_size)
+ return -EINVAL;
+
+ buf->addr = vb2_plane_vaddr(vb, 0);
+
+ return 0;
+}
+
+static void histo_buffer_queue(struct vb2_buffer *vb)
+{
+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+ struct vsp1_histogram *histo = vb2_get_drv_priv(vb->vb2_queue);
+ struct vsp1_histogram_buffer *buf = to_vsp1_histogram_buffer(vbuf);
+ unsigned long flags;
+
+ spin_lock_irqsave(&histo->irqlock, flags);
+ list_add_tail(&buf->queue, &histo->irqqueue);
+ spin_unlock_irqrestore(&histo->irqlock, flags);
+}
+
+static int histo_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+ return 0;
+}
+
+static void histo_stop_streaming(struct vb2_queue *vq)
+{
+ struct vsp1_histogram *histo = vb2_get_drv_priv(vq);
+ struct vsp1_histogram_buffer *buffer;
+ unsigned long flags;
+
+ spin_lock_irqsave(&histo->irqlock, flags);
+
+ /* Remove all buffers from the IRQ queue. */
+ list_for_each_entry(buffer, &histo->irqqueue, queue)
+ vb2_buffer_done(&buffer->buf.vb2_buf, VB2_BUF_STATE_ERROR);
+ INIT_LIST_HEAD(&histo->irqqueue);
+
+ /* Wait for the buffer being read out (if any) to complete. */
+ wait_event_lock_irq(histo->wait_queue, !histo->readout, histo->irqlock);
+
+ spin_unlock_irqrestore(&histo->irqlock, flags);
+}
+
+static const struct vb2_ops histo_video_queue_qops = {
+ .queue_setup = histo_queue_setup,
+ .buf_prepare = histo_buffer_prepare,
+ .buf_queue = histo_buffer_queue,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+ .start_streaming = histo_start_streaming,
+ .stop_streaming = histo_stop_streaming,
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Subdevice Operations
+ */
+
+static int histo_enum_mbus_code(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ struct vsp1_histogram *histo = subdev_to_histo(subdev);
+
+ if (code->pad == HISTO_PAD_SOURCE) {
+ code->code = MEDIA_BUS_FMT_FIXED;
+ return 0;
+ }
+
+ return vsp1_subdev_enum_mbus_code(subdev, cfg, code, histo->formats,
+ histo->num_formats);
+}
+
+static int histo_enum_frame_size(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ if (fse->pad != HISTO_PAD_SINK)
+ return -EINVAL;
+
+ return vsp1_subdev_enum_frame_size(subdev, cfg, fse, HISTO_MIN_SIZE,
+ HISTO_MIN_SIZE, HISTO_MAX_SIZE,
+ HISTO_MAX_SIZE);
+}
+
+static int histo_get_selection(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_selection *sel)
+{
+ struct vsp1_histogram *histo = subdev_to_histo(subdev);
+ struct v4l2_subdev_pad_config *config;
+ struct v4l2_mbus_framefmt *format;
+ struct v4l2_rect *crop;
+ int ret = 0;
+
+ if (sel->pad != HISTO_PAD_SINK)
+ return -EINVAL;
+
+ mutex_lock(&histo->entity.lock);
+
+ config = vsp1_entity_get_pad_config(&histo->entity, cfg, sel->which);
+ if (!config) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ switch (sel->target) {
+ case V4L2_SEL_TGT_COMPOSE_BOUNDS:
+ case V4L2_SEL_TGT_COMPOSE_DEFAULT:
+ crop = vsp1_entity_get_pad_selection(&histo->entity, config,
+ HISTO_PAD_SINK,
+ V4L2_SEL_TGT_CROP);
+ sel->r.left = 0;
+ sel->r.top = 0;
+ sel->r.width = crop->width;
+ sel->r.height = crop->height;
+ break;
+
+ case V4L2_SEL_TGT_CROP_BOUNDS:
+ case V4L2_SEL_TGT_CROP_DEFAULT:
+ format = vsp1_entity_get_pad_format(&histo->entity, config,
+ HISTO_PAD_SINK);
+ sel->r.left = 0;
+ sel->r.top = 0;
+ sel->r.width = format->width;
+ sel->r.height = format->height;
+ break;
+
+ case V4L2_SEL_TGT_COMPOSE:
+ case V4L2_SEL_TGT_CROP:
+ sel->r = *vsp1_entity_get_pad_selection(&histo->entity, config,
+ sel->pad, sel->target);
+ break;
+
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+done:
+ mutex_unlock(&histo->entity.lock);
+ return ret;
+}
+
+static int histo_set_crop(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *config,
+ struct v4l2_subdev_selection *sel)
+{
+ struct vsp1_histogram *histo = subdev_to_histo(subdev);
+ struct v4l2_mbus_framefmt *format;
+ struct v4l2_rect *selection;
+
+ /* The crop rectangle must be inside the input frame. */
+ format = vsp1_entity_get_pad_format(&histo->entity, config,
+ HISTO_PAD_SINK);
+ sel->r.left = clamp_t(unsigned int, sel->r.left, 0, format->width - 1);
+ sel->r.top = clamp_t(unsigned int, sel->r.top, 0, format->height - 1);
+ sel->r.width = clamp_t(unsigned int, sel->r.width, HISTO_MIN_SIZE,
+ format->width - sel->r.left);
+ sel->r.height = clamp_t(unsigned int, sel->r.height, HISTO_MIN_SIZE,
+ format->height - sel->r.top);
+
+ /* Set the crop rectangle and reset the compose rectangle. */
+ selection = vsp1_entity_get_pad_selection(&histo->entity, config,
+ sel->pad, V4L2_SEL_TGT_CROP);
+ *selection = sel->r;
+
+ selection = vsp1_entity_get_pad_selection(&histo->entity, config,
+ sel->pad,
+ V4L2_SEL_TGT_COMPOSE);
+ *selection = sel->r;
+
+ return 0;
+}
+
+static int histo_set_compose(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *config,
+ struct v4l2_subdev_selection *sel)
+{
+ struct vsp1_histogram *histo = subdev_to_histo(subdev);
+ struct v4l2_rect *compose;
+ struct v4l2_rect *crop;
+ unsigned int ratio;
+
+ /*
+ * The compose rectangle is used to configure downscaling, the top left
+ * corner is fixed to (0,0) and the size to 1/2 or 1/4 of the crop
+ * rectangle.
+ */
+ sel->r.left = 0;
+ sel->r.top = 0;
+
+ crop = vsp1_entity_get_pad_selection(&histo->entity, config, sel->pad,
+ V4L2_SEL_TGT_CROP);
+
+ /*
+ * Clamp the width and height to acceptable values first and then
+ * compute the closest rounded dividing ratio.
+ *
+ * Ratio Rounded ratio
+ * --------------------------
+ * [1.0 1.5[ 1
+ * [1.5 3.0[ 2
+ * [3.0 4.0] 4
+ *
+ * The rounded ratio can be computed using
+ *
+ * 1 << (ceil(ratio * 2) / 3)
+ */
+ sel->r.width = clamp(sel->r.width, crop->width / 4, crop->width);
+ ratio = 1 << (crop->width * 2 / sel->r.width / 3);
+ sel->r.width = crop->width / ratio;
+
+
+ sel->r.height = clamp(sel->r.height, crop->height / 4, crop->height);
+ ratio = 1 << (crop->height * 2 / sel->r.height / 3);
+ sel->r.height = crop->height / ratio;
+
+ compose = vsp1_entity_get_pad_selection(&histo->entity, config,
+ sel->pad,
+ V4L2_SEL_TGT_COMPOSE);
+ *compose = sel->r;
+
+ return 0;
+}
+
+static int histo_set_selection(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_selection *sel)
+{
+ struct vsp1_histogram *histo = subdev_to_histo(subdev);
+ struct v4l2_subdev_pad_config *config;
+ int ret;
+
+ if (sel->pad != HISTO_PAD_SINK)
+ return -EINVAL;
+
+ mutex_lock(&histo->entity.lock);
+
+ config = vsp1_entity_get_pad_config(&histo->entity, cfg, sel->which);
+ if (!config) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ if (sel->target == V4L2_SEL_TGT_CROP)
+ ret = histo_set_crop(subdev, config, sel);
+ else if (sel->target == V4L2_SEL_TGT_COMPOSE)
+ ret = histo_set_compose(subdev, config, sel);
+ else
+ ret = -EINVAL;
+
+done:
+ mutex_unlock(&histo->entity.lock);
+ return ret;
+}
+
+static int histo_get_format(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ if (fmt->pad == HISTO_PAD_SOURCE) {
+ fmt->format.code = MEDIA_BUS_FMT_FIXED;
+ fmt->format.width = 0;
+ fmt->format.height = 0;
+ fmt->format.field = V4L2_FIELD_NONE;
+ fmt->format.colorspace = V4L2_COLORSPACE_RAW;
+ return 0;
+ }
+
+ return vsp1_subdev_get_pad_format(subdev, cfg, fmt);
+}
+
+static int histo_set_format(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct vsp1_histogram *histo = subdev_to_histo(subdev);
+ struct v4l2_subdev_pad_config *config;
+ struct v4l2_mbus_framefmt *format;
+ struct v4l2_rect *selection;
+ unsigned int i;
+ int ret = 0;
+
+ if (fmt->pad != HISTO_PAD_SINK)
+ return histo_get_format(subdev, cfg, fmt);
+
+ mutex_lock(&histo->entity.lock);
+
+ config = vsp1_entity_get_pad_config(&histo->entity, cfg, fmt->which);
+ if (!config) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ /*
+ * Default to the first format if the requested format is not
+ * supported.
+ */
+ for (i = 0; i < histo->num_formats; ++i) {
+ if (fmt->format.code == histo->formats[i])
+ break;
+ }
+ if (i == histo->num_formats)
+ fmt->format.code = histo->formats[0];
+
+ format = vsp1_entity_get_pad_format(&histo->entity, config, fmt->pad);
+
+ format->code = fmt->format.code;
+ format->width = clamp_t(unsigned int, fmt->format.width,
+ HISTO_MIN_SIZE, HISTO_MAX_SIZE);
+ format->height = clamp_t(unsigned int, fmt->format.height,
+ HISTO_MIN_SIZE, HISTO_MAX_SIZE);
+ format->field = V4L2_FIELD_NONE;
+ format->colorspace = V4L2_COLORSPACE_SRGB;
+
+ fmt->format = *format;
+
+ /* Reset the crop and compose rectangles */
+ selection = vsp1_entity_get_pad_selection(&histo->entity, config,
+ fmt->pad, V4L2_SEL_TGT_CROP);
+ selection->left = 0;
+ selection->top = 0;
+ selection->width = format->width;
+ selection->height = format->height;
+
+ selection = vsp1_entity_get_pad_selection(&histo->entity, config,
+ fmt->pad,
+ V4L2_SEL_TGT_COMPOSE);
+ selection->left = 0;
+ selection->top = 0;
+ selection->width = format->width;
+ selection->height = format->height;
+
+done:
+ mutex_unlock(&histo->entity.lock);
+ return ret;
+}
+
+static const struct v4l2_subdev_pad_ops histo_pad_ops = {
+ .enum_mbus_code = histo_enum_mbus_code,
+ .enum_frame_size = histo_enum_frame_size,
+ .get_fmt = histo_get_format,
+ .set_fmt = histo_set_format,
+ .get_selection = histo_get_selection,
+ .set_selection = histo_set_selection,
+};
+
+static const struct v4l2_subdev_ops histo_ops = {
+ .pad = &histo_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 ioctls
+ */
+
+static int histo_v4l2_querycap(struct file *file, void *fh,
+ struct v4l2_capability *cap)
+{
+ struct v4l2_fh *vfh = file->private_data;
+ struct vsp1_histogram *histo = vdev_to_histo(vfh->vdev);
+
+ cap->capabilities = V4L2_CAP_DEVICE_CAPS | V4L2_CAP_STREAMING
+ | V4L2_CAP_VIDEO_CAPTURE_MPLANE
+ | V4L2_CAP_VIDEO_OUTPUT_MPLANE
+ | V4L2_CAP_META_CAPTURE;
+ cap->device_caps = V4L2_CAP_META_CAPTURE
+ | V4L2_CAP_STREAMING;
+
+ strlcpy(cap->driver, "vsp1", sizeof(cap->driver));
+ strlcpy(cap->card, histo->video.name, sizeof(cap->card));
+ snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
+ dev_name(histo->entity.vsp1->dev));
+
+ return 0;
+}
+
+static int histo_v4l2_enum_format(struct file *file, void *fh,
+ struct v4l2_fmtdesc *f)
+{
+ struct v4l2_fh *vfh = file->private_data;
+ struct vsp1_histogram *histo = vdev_to_histo(vfh->vdev);
+
+ if (f->index > 0 || f->type != histo->queue.type)
+ return -EINVAL;
+
+ f->pixelformat = histo->meta_format;
+
+ return 0;
+}
+
+static int histo_v4l2_get_format(struct file *file, void *fh,
+ struct v4l2_format *format)
+{
+ struct v4l2_fh *vfh = file->private_data;
+ struct vsp1_histogram *histo = vdev_to_histo(vfh->vdev);
+ struct v4l2_meta_format *meta = &format->fmt.meta;
+
+ if (format->type != histo->queue.type)
+ return -EINVAL;
+
+ memset(meta, 0, sizeof(*meta));
+
+ meta->dataformat = histo->meta_format;
+ meta->buffersize = histo->data_size;
+
+ return 0;
+}
+
+static const struct v4l2_ioctl_ops histo_v4l2_ioctl_ops = {
+ .vidioc_querycap = histo_v4l2_querycap,
+ .vidioc_enum_fmt_meta_cap = histo_v4l2_enum_format,
+ .vidioc_g_fmt_meta_cap = histo_v4l2_get_format,
+ .vidioc_s_fmt_meta_cap = histo_v4l2_get_format,
+ .vidioc_try_fmt_meta_cap = histo_v4l2_get_format,
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_create_bufs = vb2_ioctl_create_bufs,
+ .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 File Operations
+ */
+
+static const struct v4l2_file_operations histo_v4l2_fops = {
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = video_ioctl2,
+ .open = v4l2_fh_open,
+ .release = vb2_fop_release,
+ .poll = vb2_fop_poll,
+ .mmap = vb2_fop_mmap,
+};
+
+static void vsp1_histogram_cleanup(struct vsp1_histogram *histo)
+{
+ if (video_is_registered(&histo->video))
+ video_unregister_device(&histo->video);
+
+ media_entity_cleanup(&histo->video.entity);
+}
+
+void vsp1_histogram_destroy(struct vsp1_entity *entity)
+{
+ struct vsp1_histogram *histo = subdev_to_histo(&entity->subdev);
+
+ vsp1_histogram_cleanup(histo);
+}
+
+int vsp1_histogram_init(struct vsp1_device *vsp1, struct vsp1_histogram *histo,
+ enum vsp1_entity_type type, const char *name,
+ const struct vsp1_entity_operations *ops,
+ const unsigned int *formats, unsigned int num_formats,
+ size_t data_size, u32 meta_format)
+{
+ int ret;
+
+ histo->formats = formats;
+ histo->num_formats = num_formats;
+ histo->data_size = data_size;
+ histo->meta_format = meta_format;
+
+ histo->pad.flags = MEDIA_PAD_FL_SINK;
+ histo->video.vfl_dir = VFL_DIR_RX;
+
+ mutex_init(&histo->lock);
+ spin_lock_init(&histo->irqlock);
+ INIT_LIST_HEAD(&histo->irqqueue);
+ init_waitqueue_head(&histo->wait_queue);
+
+ /* Initialize the VSP entity... */
+ histo->entity.ops = ops;
+ histo->entity.type = type;
+
+ ret = vsp1_entity_init(vsp1, &histo->entity, name, 2, &histo_ops,
+ MEDIA_ENT_F_PROC_VIDEO_STATISTICS);
+ if (ret < 0)
+ return ret;
+
+ /* ... and the media entity... */
+ ret = media_entity_pads_init(&histo->video.entity, 1, &histo->pad);
+ if (ret < 0)
+ return ret;
+
+ /* ... and the video node... */
+ histo->video.v4l2_dev = &vsp1->v4l2_dev;
+ histo->video.fops = &histo_v4l2_fops;
+ snprintf(histo->video.name, sizeof(histo->video.name),
+ "%s histo", histo->entity.subdev.name);
+ histo->video.vfl_type = VFL_TYPE_GRABBER;
+ histo->video.release = video_device_release_empty;
+ histo->video.ioctl_ops = &histo_v4l2_ioctl_ops;
+
+ video_set_drvdata(&histo->video, histo);
+
+ /* ... and the buffers queue... */
+ histo->queue.type = V4L2_BUF_TYPE_META_CAPTURE;
+ histo->queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
+ histo->queue.lock = &histo->lock;
+ histo->queue.drv_priv = histo;
+ histo->queue.buf_struct_size = sizeof(struct vsp1_histogram_buffer);
+ histo->queue.ops = &histo_video_queue_qops;
+ histo->queue.mem_ops = &vb2_vmalloc_memops;
+ histo->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
+ histo->queue.dev = vsp1->dev;
+ ret = vb2_queue_init(&histo->queue);
+ if (ret < 0) {
+ dev_err(vsp1->dev, "failed to initialize vb2 queue\n");
+ goto error;
+ }
+
+ /* ... and register the video device. */
+ histo->video.queue = &histo->queue;
+ ret = video_register_device(&histo->video, VFL_TYPE_GRABBER, -1);
+ if (ret < 0) {
+ dev_err(vsp1->dev, "failed to register video device\n");
+ goto error;
+ }
+
+ return 0;
+
+error:
+ vsp1_histogram_cleanup(histo);
+ return ret;
+}
diff --git a/drivers/media/platform/vsp1/vsp1_histo.h b/drivers/media/platform/vsp1/vsp1_histo.h
new file mode 100644
index 000000000000..af2874f6031d
--- /dev/null
+++ b/drivers/media/platform/vsp1/vsp1_histo.h
@@ -0,0 +1,84 @@
+/*
+ * vsp1_histo.h -- R-Car VSP1 Histogram API
+ *
+ * Copyright (C) 2016 Renesas Electronics Corporation
+ * Copyright (C) 2016 Laurent Pinchart
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __VSP1_HISTO_H__
+#define __VSP1_HISTO_H__
+
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+
+#include <media/media-entity.h>
+#include <media/v4l2-dev.h>
+#include <media/videobuf2-v4l2.h>
+
+#include "vsp1_entity.h"
+
+struct vsp1_device;
+struct vsp1_pipeline;
+
+#define HISTO_PAD_SINK 0
+#define HISTO_PAD_SOURCE 1
+
+struct vsp1_histogram_buffer {
+ struct vb2_v4l2_buffer buf;
+ struct list_head queue;
+ void *addr;
+};
+
+struct vsp1_histogram {
+ struct vsp1_pipeline *pipe;
+
+ struct vsp1_entity entity;
+ struct video_device video;
+ struct media_pad pad;
+
+ const u32 *formats;
+ unsigned int num_formats;
+ size_t data_size;
+ u32 meta_format;
+
+ struct mutex lock;
+ struct vb2_queue queue;
+
+ spinlock_t irqlock;
+ struct list_head irqqueue;
+
+ wait_queue_head_t wait_queue;
+ bool readout;
+};
+
+static inline struct vsp1_histogram *vdev_to_histo(struct video_device *vdev)
+{
+ return container_of(vdev, struct vsp1_histogram, video);
+}
+
+static inline struct vsp1_histogram *subdev_to_histo(struct v4l2_subdev *subdev)
+{
+ return container_of(subdev, struct vsp1_histogram, entity.subdev);
+}
+
+int vsp1_histogram_init(struct vsp1_device *vsp1, struct vsp1_histogram *histo,
+ enum vsp1_entity_type type, const char *name,
+ const struct vsp1_entity_operations *ops,
+ const unsigned int *formats, unsigned int num_formats,
+ size_t data_size, u32 meta_format);
+void vsp1_histogram_destroy(struct vsp1_entity *entity);
+
+struct vsp1_histogram_buffer *
+vsp1_histogram_buffer_get(struct vsp1_histogram *histo);
+void vsp1_histogram_buffer_complete(struct vsp1_histogram *histo,
+ struct vsp1_histogram_buffer *buf,
+ size_t size);
+
+#endif /* __VSP1_HISTO_H__ */
--
2.11.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCHv4 05/15] v4l: vsp1: Support histogram generators in pipeline configuration
2017-04-10 19:26 [PATCHv4 00/15] R-Car VSP1 Histogram Support Hans Verkuil
` (3 preceding siblings ...)
2017-04-10 19:26 ` [PATCHv4 04/15] v4l: vsp1: Add histogram support Hans Verkuil
@ 2017-04-10 19:26 ` Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 06/15] v4l: vsp1: Fix HGO and HGT routing register addresses Hans Verkuil
` (11 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Hans Verkuil @ 2017-04-10 19:26 UTC (permalink / raw)
To: linux-media; +Cc: Laurent Pinchart, Sakari Ailus, Laurent Pinchart
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Histogram generators are single-pad entities that branch as leaf nodes
at any point in the pipeline. Make sure that pipeline traversal and
routing configuration support them correctly.
Support for the actual HGO and HGT operation will come later.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
drivers/media/platform/vsp1/vsp1_drm.c | 2 +-
drivers/media/platform/vsp1/vsp1_drv.c | 4 +-
drivers/media/platform/vsp1/vsp1_entity.c | 124 ++++++++++++++++++++++++++----
drivers/media/platform/vsp1/vsp1_entity.h | 8 +-
drivers/media/platform/vsp1/vsp1_pipe.c | 6 +-
drivers/media/platform/vsp1/vsp1_video.c | 18 ++---
6 files changed, 134 insertions(+), 28 deletions(-)
diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
index 1f88d8473b71..9d235e830f5a 100644
--- a/drivers/media/platform/vsp1/vsp1_drm.c
+++ b/drivers/media/platform/vsp1/vsp1_drm.c
@@ -496,7 +496,7 @@ void vsp1_du_atomic_flush(struct device *dev)
}
}
- vsp1_entity_route_setup(entity, dl);
+ vsp1_entity_route_setup(entity, pipe, dl);
if (entity->ops->configure) {
entity->ops->configure(entity, pipe, dl,
diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c
index 8d1e61b353bb..83a6669a6328 100644
--- a/drivers/media/platform/vsp1/vsp1_drv.c
+++ b/drivers/media/platform/vsp1/vsp1_drv.c
@@ -105,7 +105,9 @@ static int vsp1_create_sink_links(struct vsp1_device *vsp1,
if (source->type == sink->type)
continue;
- if (source->type == VSP1_ENTITY_LIF ||
+ if (source->type == VSP1_ENTITY_HGO ||
+ source->type == VSP1_ENTITY_HGT ||
+ source->type == VSP1_ENTITY_LIF ||
source->type == VSP1_ENTITY_WPF)
continue;
diff --git a/drivers/media/platform/vsp1/vsp1_entity.c b/drivers/media/platform/vsp1/vsp1_entity.c
index 12eca5660d6e..88a2aae182ba 100644
--- a/drivers/media/platform/vsp1/vsp1_entity.c
+++ b/drivers/media/platform/vsp1/vsp1_entity.c
@@ -21,6 +21,8 @@
#include "vsp1.h"
#include "vsp1_dl.h"
#include "vsp1_entity.h"
+#include "vsp1_pipe.h"
+#include "vsp1_rwpf.h"
static inline struct vsp1_entity *
media_entity_to_vsp1_entity(struct media_entity *entity)
@@ -28,11 +30,14 @@ media_entity_to_vsp1_entity(struct media_entity *entity)
return container_of(entity, struct vsp1_entity, subdev.entity);
}
-void vsp1_entity_route_setup(struct vsp1_entity *source,
+void vsp1_entity_route_setup(struct vsp1_entity *entity,
+ struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl)
{
+ struct vsp1_entity *source;
struct vsp1_entity *sink;
+ source = entity;
if (source->route->reg == 0)
return;
@@ -283,25 +288,32 @@ int vsp1_subdev_enum_frame_size(struct v4l2_subdev *subdev,
* Media Operations
*/
-int vsp1_entity_link_setup(struct media_entity *entity,
- const struct media_pad *local,
- const struct media_pad *remote, u32 flags)
+static int vsp1_entity_link_setup_source(const struct media_pad *source_pad,
+ const struct media_pad *sink_pad,
+ u32 flags)
{
struct vsp1_entity *source;
- if (!(local->flags & MEDIA_PAD_FL_SOURCE))
- return 0;
-
- source = media_entity_to_vsp1_entity(local->entity);
+ source = media_entity_to_vsp1_entity(source_pad->entity);
if (!source->route)
return 0;
if (flags & MEDIA_LNK_FL_ENABLED) {
- if (source->sink)
- return -EBUSY;
- source->sink = remote->entity;
- source->sink_pad = remote->index;
+ struct vsp1_entity *sink
+ = media_entity_to_vsp1_entity(sink_pad->entity);
+
+ /*
+ * Fan-out is limited to one for the normal data path plus
+ * optional HGO and HGT. We ignore the HGO and HGT here.
+ */
+ if (sink->type != VSP1_ENTITY_HGO &&
+ sink->type != VSP1_ENTITY_HGT) {
+ if (source->sink)
+ return -EBUSY;
+ source->sink = sink_pad->entity;
+ source->sink_pad = sink_pad->index;
+ }
} else {
source->sink = NULL;
source->sink_pad = 0;
@@ -310,6 +322,85 @@ int vsp1_entity_link_setup(struct media_entity *entity,
return 0;
}
+static int vsp1_entity_link_setup_sink(const struct media_pad *source_pad,
+ const struct media_pad *sink_pad,
+ u32 flags)
+{
+ struct vsp1_entity *sink;
+
+ sink = media_entity_to_vsp1_entity(sink_pad->entity);
+
+ if (flags & MEDIA_LNK_FL_ENABLED) {
+ /* Fan-in is limited to one. */
+ if (sink->sources[sink_pad->index])
+ return -EBUSY;
+
+ sink->sources[sink_pad->index] = source_pad->entity;
+ } else {
+ sink->sources[sink_pad->index] = NULL;
+ }
+
+ return 0;
+}
+
+int vsp1_entity_link_setup(struct media_entity *entity,
+ const struct media_pad *local,
+ const struct media_pad *remote, u32 flags)
+{
+ if (local->flags & MEDIA_PAD_FL_SOURCE)
+ return vsp1_entity_link_setup_source(local, remote, flags);
+ else
+ return vsp1_entity_link_setup_sink(remote, local, flags);
+}
+
+/**
+ * vsp1_entity_remote_pad - Find the pad at the remote end of a link
+ * @pad: Pad at the local end of the link
+ *
+ * Search for a remote pad connected to the given pad by iterating over all
+ * links originating or terminating at that pad until an enabled link is found.
+ *
+ * Our link setup implementation guarantees that the output fan-out will not be
+ * higher than one for the data pipelines, except for the links to the HGO and
+ * HGT that can be enabled in addition to a regular data link. When traversing
+ * outgoing links this function ignores HGO and HGT entities and should thus be
+ * used in place of the generic media_entity_remote_pad() function to traverse
+ * data pipelines.
+ *
+ * Return a pointer to the pad at the remote end of the first found enabled
+ * link, or NULL if no enabled link has been found.
+ */
+struct media_pad *vsp1_entity_remote_pad(struct media_pad *pad)
+{
+ struct media_link *link;
+
+ list_for_each_entry(link, &pad->entity->links, list) {
+ struct vsp1_entity *entity;
+
+ if (!(link->flags & MEDIA_LNK_FL_ENABLED))
+ continue;
+
+ /* If we're the sink the source will never be an HGO or HGT. */
+ if (link->sink == pad)
+ return link->source;
+
+ if (link->source != pad)
+ continue;
+
+ /* If the sink isn't a subdevice it can't be an HGO or HGT. */
+ if (!is_media_entity_v4l2_subdev(link->sink->entity))
+ return link->sink;
+
+ entity = media_entity_to_vsp1_entity(link->sink->entity);
+ if (entity->type != VSP1_ENTITY_HGO &&
+ entity->type != VSP1_ENTITY_HGT)
+ return link->sink;
+ }
+
+ return NULL;
+
+}
+
/* -----------------------------------------------------------------------------
* Initialization
*/
@@ -388,7 +479,14 @@ int vsp1_entity_init(struct vsp1_device *vsp1, struct vsp1_entity *entity,
for (i = 0; i < num_pads - 1; ++i)
entity->pads[i].flags = MEDIA_PAD_FL_SINK;
- entity->pads[num_pads - 1].flags = MEDIA_PAD_FL_SOURCE;
+ entity->sources = devm_kcalloc(vsp1->dev, max(num_pads - 1, 1U),
+ sizeof(*entity->sources), GFP_KERNEL);
+ if (entity->sources == NULL)
+ return -ENOMEM;
+
+ /* Single-pad entities only have a sink. */
+ entity->pads[num_pads - 1].flags = num_pads > 1 ? MEDIA_PAD_FL_SOURCE
+ : MEDIA_PAD_FL_SINK;
/* Initialize the media entity. */
ret = media_entity_pads_init(&entity->subdev.entity, num_pads,
diff --git a/drivers/media/platform/vsp1/vsp1_entity.h b/drivers/media/platform/vsp1/vsp1_entity.h
index 901146f807b9..c169a060b6d2 100644
--- a/drivers/media/platform/vsp1/vsp1_entity.h
+++ b/drivers/media/platform/vsp1/vsp1_entity.h
@@ -25,6 +25,8 @@ struct vsp1_pipeline;
enum vsp1_entity_type {
VSP1_ENTITY_BRU,
VSP1_ENTITY_CLU,
+ VSP1_ENTITY_HGO,
+ VSP1_ENTITY_HGT,
VSP1_ENTITY_HSI,
VSP1_ENTITY_HST,
VSP1_ENTITY_LIF,
@@ -102,6 +104,7 @@ struct vsp1_entity {
struct media_pad *pads;
unsigned int source_pad;
+ struct media_entity **sources;
struct media_entity *sink;
unsigned int sink_pad;
@@ -142,9 +145,12 @@ vsp1_entity_get_pad_selection(struct vsp1_entity *entity,
int vsp1_entity_init_cfg(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg);
-void vsp1_entity_route_setup(struct vsp1_entity *source,
+void vsp1_entity_route_setup(struct vsp1_entity *entity,
+ struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl);
+struct media_pad *vsp1_entity_remote_pad(struct media_pad *pad);
+
int vsp1_subdev_get_pad_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt);
diff --git a/drivers/media/platform/vsp1/vsp1_pipe.c b/drivers/media/platform/vsp1/vsp1_pipe.c
index 35364f594e19..b5a765cbfc86 100644
--- a/drivers/media/platform/vsp1/vsp1_pipe.c
+++ b/drivers/media/platform/vsp1/vsp1_pipe.c
@@ -252,6 +252,7 @@ bool vsp1_pipeline_stopped(struct vsp1_pipeline *pipe)
int vsp1_pipeline_stop(struct vsp1_pipeline *pipe)
{
+ struct vsp1_device *vsp1 = pipe->output->entity.vsp1;
struct vsp1_entity *entity;
unsigned long flags;
int ret;
@@ -261,8 +262,7 @@ int vsp1_pipeline_stop(struct vsp1_pipeline *pipe)
* When using display lists in continuous frame mode the only
* way to stop the pipeline is to reset the hardware.
*/
- ret = vsp1_reset_wpf(pipe->output->entity.vsp1,
- pipe->output->entity.index);
+ ret = vsp1_reset_wpf(vsp1, pipe->output->entity.index);
if (ret == 0) {
spin_lock_irqsave(&pipe->irqlock, flags);
pipe->state = VSP1_PIPELINE_STOPPED;
@@ -282,7 +282,7 @@ int vsp1_pipeline_stop(struct vsp1_pipeline *pipe)
list_for_each_entry(entity, &pipe->entities, list_pipe) {
if (entity->route && entity->route->reg)
- vsp1_write(entity->vsp1, entity->route->reg,
+ vsp1_write(vsp1, entity->route->reg,
VI6_DPR_NODE_UNUSED);
}
diff --git a/drivers/media/platform/vsp1/vsp1_video.c b/drivers/media/platform/vsp1/vsp1_video.c
index 795a3ca9ca03..86c33994468b 100644
--- a/drivers/media/platform/vsp1/vsp1_video.c
+++ b/drivers/media/platform/vsp1/vsp1_video.c
@@ -486,7 +486,12 @@ static int vsp1_video_pipeline_build_branch(struct vsp1_pipeline *pipe,
if (ret < 0)
return ret;
- pad = media_entity_remote_pad(&input->entity.pads[RWPF_PAD_SOURCE]);
+ /*
+ * The main data path doesn't include the HGO or HGT, use
+ * vsp1_entity_remote_pad() to traverse the graph.
+ */
+
+ pad = vsp1_entity_remote_pad(&input->entity.pads[RWPF_PAD_SOURCE]);
while (1) {
if (pad == NULL) {
@@ -539,14 +544,9 @@ static int vsp1_video_pipeline_build_branch(struct vsp1_pipeline *pipe,
: &input->entity;
}
- /*
- * Follow the source link. The link setup operations ensure
- * that the output fan-out can't be more than one, there is thus
- * no need to verify here that only a single source link is
- * activated.
- */
+ /* Follow the source link, ignoring any HGO or HGT. */
pad = &entity->pads[entity->source_pad];
- pad = media_entity_remote_pad(pad);
+ pad = vsp1_entity_remote_pad(pad);
}
/* The last entity must be the output WPF. */
@@ -800,7 +800,7 @@ static int vsp1_video_setup_pipeline(struct vsp1_pipeline *pipe)
}
list_for_each_entry(entity, &pipe->entities, list_pipe) {
- vsp1_entity_route_setup(entity, pipe->dl);
+ vsp1_entity_route_setup(entity, pipe, pipe->dl);
if (entity->ops->configure)
entity->ops->configure(entity, pipe, pipe->dl,
--
2.11.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCHv4 06/15] v4l: vsp1: Fix HGO and HGT routing register addresses
2017-04-10 19:26 [PATCHv4 00/15] R-Car VSP1 Histogram Support Hans Verkuil
` (4 preceding siblings ...)
2017-04-10 19:26 ` [PATCHv4 05/15] v4l: vsp1: Support histogram generators in pipeline configuration Hans Verkuil
@ 2017-04-10 19:26 ` Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 07/15] v4l: Define a pixel format for the R-Car VSP1 1-D histogram engine Hans Verkuil
` (10 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Hans Verkuil @ 2017-04-10 19:26 UTC (permalink / raw)
To: linux-media; +Cc: Laurent Pinchart, Sakari Ailus, Laurent Pinchart
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The addresses are incorrect, fix them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
drivers/media/platform/vsp1/vsp1_regs.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/vsp1/vsp1_regs.h b/drivers/media/platform/vsp1/vsp1_regs.h
index 47b1dee044fb..61369e267667 100644
--- a/drivers/media/platform/vsp1/vsp1_regs.h
+++ b/drivers/media/platform/vsp1/vsp1_regs.h
@@ -328,8 +328,8 @@
#define VI6_DPR_ROUTE_RT_MASK (0x3f << 0)
#define VI6_DPR_ROUTE_RT_SHIFT 0
-#define VI6_DPR_HGO_SMPPT 0x2050
-#define VI6_DPR_HGT_SMPPT 0x2054
+#define VI6_DPR_HGO_SMPPT 0x2054
+#define VI6_DPR_HGT_SMPPT 0x2058
#define VI6_DPR_SMPPT_TGW_MASK (7 << 8)
#define VI6_DPR_SMPPT_TGW_SHIFT 8
#define VI6_DPR_SMPPT_PT_MASK (0x3f << 0)
--
2.11.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCHv4 07/15] v4l: Define a pixel format for the R-Car VSP1 1-D histogram engine
2017-04-10 19:26 [PATCHv4 00/15] R-Car VSP1 Histogram Support Hans Verkuil
` (5 preceding siblings ...)
2017-04-10 19:26 ` [PATCHv4 06/15] v4l: vsp1: Fix HGO and HGT routing register addresses Hans Verkuil
@ 2017-04-10 19:26 ` Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 08/15] v4l: vsp1: Add HGO support Hans Verkuil
` (9 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Hans Verkuil @ 2017-04-10 19:26 UTC (permalink / raw)
To: linux-media; +Cc: Laurent Pinchart, Sakari Ailus, Laurent Pinchart
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The format is used on the R-Car VSP1 video queues that carry
1-D histogram statistics data.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
Documentation/media/uapi/v4l/meta-formats.rst | 15 ++
.../media/uapi/v4l/pixfmt-meta-vsp1-hgo.rst | 168 +++++++++++++++++++++
Documentation/media/uapi/v4l/pixfmt.rst | 1 +
drivers/media/v4l2-core/v4l2-ioctl.c | 1 +
include/uapi/linux/videodev2.h | 3 +
5 files changed, 188 insertions(+)
create mode 100644 Documentation/media/uapi/v4l/meta-formats.rst
create mode 100644 Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgo.rst
diff --git a/Documentation/media/uapi/v4l/meta-formats.rst b/Documentation/media/uapi/v4l/meta-formats.rst
new file mode 100644
index 000000000000..05ab91e12f10
--- /dev/null
+++ b/Documentation/media/uapi/v4l/meta-formats.rst
@@ -0,0 +1,15 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _meta-formats:
+
+****************
+Metadata Formats
+****************
+
+These formats are used for the :ref:`metadata` interface only.
+
+
+.. toctree::
+ :maxdepth: 1
+
+ pixfmt-meta-vsp1-hgo
diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgo.rst b/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgo.rst
new file mode 100644
index 000000000000..8d37bb313493
--- /dev/null
+++ b/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgo.rst
@@ -0,0 +1,168 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _v4l2-meta-fmt-vsp1-hgo:
+
+*******************************
+V4L2_META_FMT_VSP1_HGO ('VSPH')
+*******************************
+
+Renesas R-Car VSP1 1-D Histogram Data
+
+
+Description
+===========
+
+This format describes histogram data generated by the Renesas R-Car VSP1 1-D
+Histogram (HGO) engine.
+
+The VSP1 HGO is a histogram computation engine that can operate on RGB, YCrCb
+or HSV data. It operates on a possibly cropped and subsampled input image and
+computes the minimum, maximum and sum of all pixels as well as per-channel
+histograms.
+
+The HGO can compute histograms independently per channel, on the maximum of the
+three channels (RGB data only) or on the Y channel only (YCbCr only). It can
+additionally output the histogram with 64 or 256 bins, resulting in four
+possible modes of operation.
+
+- In *64 bins normal mode*, the HGO operates on the three channels independently
+ to compute three 64-bins histograms. RGB, YCbCr and HSV image formats are
+ supported.
+- In *64 bins maximum mode*, the HGO operates on the maximum of the (R, G, B)
+ channels to compute a single 64-bins histogram. Only the RGB image format is
+ supported.
+- In *256 bins normal mode*, the HGO operates on the Y channel to compute a
+ single 256-bins histogram. Only the YCbCr image format is supported.
+- In *256 bins maximum mode*, the HGO operates on the maximum of the (R, G, B)
+ channels to compute a single 256-bins histogram. Only the RGB image format is
+ supported.
+
+**Byte Order.**
+All data is stored in memory in little endian format. Each cell in the tables
+contains one byte.
+
+.. flat-table:: VSP1 HGO Data - 64 Bins, Normal Mode (792 bytes)
+ :header-rows: 2
+ :stub-columns: 0
+
+ * - Offset
+ - :cspan:`4` Memory
+ * -
+ - [31:24]
+ - [23:16]
+ - [15:8]
+ - [7:0]
+ * - 0
+ - -
+ - R/Cr/H max [7:0]
+ - -
+ - R/Cr/H min [7:0]
+ * - 4
+ - -
+ - G/Y/S max [7:0]
+ - -
+ - G/Y/S min [7:0]
+ * - 8
+ - -
+ - B/Cb/V max [7:0]
+ - -
+ - B/Cb/V min [7:0]
+ * - 12
+ - :cspan:`4` R/Cr/H sum [31:0]
+ * - 16
+ - :cspan:`4` G/Y/S sum [31:0]
+ * - 20
+ - :cspan:`4` B/Cb/V sum [31:0]
+ * - 24
+ - :cspan:`4` R/Cr/H bin 0 [31:0]
+ * -
+ - :cspan:`4` ...
+ * - 276
+ - :cspan:`4` R/Cr/H bin 63 [31:0]
+ * - 280
+ - :cspan:`4` G/Y/S bin 0 [31:0]
+ * -
+ - :cspan:`4` ...
+ * - 532
+ - :cspan:`4` G/Y/S bin 63 [31:0]
+ * - 536
+ - :cspan:`4` B/Cb/V bin 0 [31:0]
+ * -
+ - :cspan:`4` ...
+ * - 788
+ - :cspan:`4` B/Cb/V bin 63 [31:0]
+
+.. flat-table:: VSP1 HGO Data - 64 Bins, Max Mode (264 bytes)
+ :header-rows: 2
+ :stub-columns: 0
+
+ * - Offset
+ - :cspan:`4` Memory
+ * -
+ - [31:24]
+ - [23:16]
+ - [15:8]
+ - [7:0]
+ * - 0
+ - -
+ - max(R,G,B) max [7:0]
+ - -
+ - max(R,G,B) min [7:0]
+ * - 4
+ - :cspan:`4` max(R,G,B) sum [31:0]
+ * - 8
+ - :cspan:`4` max(R,G,B) bin 0 [31:0]
+ * -
+ - :cspan:`4` ...
+ * - 260
+ - :cspan:`4` max(R,G,B) bin 63 [31:0]
+
+.. flat-table:: VSP1 HGO Data - 256 Bins, Normal Mode (1032 bytes)
+ :header-rows: 2
+ :stub-columns: 0
+
+ * - Offset
+ - :cspan:`4` Memory
+ * -
+ - [31:24]
+ - [23:16]
+ - [15:8]
+ - [7:0]
+ * - 0
+ - -
+ - Y max [7:0]
+ - -
+ - Y min [7:0]
+ * - 4
+ - :cspan:`4` Y sum [31:0]
+ * - 8
+ - :cspan:`4` Y bin 0 [31:0]
+ * -
+ - :cspan:`4` ...
+ * - 1028
+ - :cspan:`4` Y bin 255 [31:0]
+
+.. flat-table:: VSP1 HGO Data - 256 Bins, Max Mode (1032 bytes)
+ :header-rows: 2
+ :stub-columns: 0
+
+ * - Offset
+ - :cspan:`4` Memory
+ * -
+ - [31:24]
+ - [23:16]
+ - [15:8]
+ - [7:0]
+ * - 0
+ - -
+ - max(R,G,B) max [7:0]
+ - -
+ - max(R,G,B) min [7:0]
+ * - 4
+ - :cspan:`4` max(R,G,B) sum [31:0]
+ * - 8
+ - :cspan:`4` max(R,G,B) bin 0 [31:0]
+ * -
+ - :cspan:`4` ...
+ * - 1028
+ - :cspan:`4` max(R,G,B) bin 255 [31:0]
diff --git a/Documentation/media/uapi/v4l/pixfmt.rst b/Documentation/media/uapi/v4l/pixfmt.rst
index 4f184c7aedab..00737152497b 100644
--- a/Documentation/media/uapi/v4l/pixfmt.rst
+++ b/Documentation/media/uapi/v4l/pixfmt.rst
@@ -34,4 +34,5 @@ see also :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>`.)
pixfmt-013
sdr-formats
tch-formats
+ meta-formats
pixfmt-reserved
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index dec6b120a5a2..a7c50241594e 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -1233,6 +1233,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
case V4L2_TCH_FMT_DELTA_TD08: descr = "8-bit signed deltas"; break;
case V4L2_TCH_FMT_TU16: descr = "16-bit unsigned touch data"; break;
case V4L2_TCH_FMT_TU08: descr = "8-bit unsigned touch data"; break;
+ case V4L2_META_FMT_VSP1_HGO: descr = "R-Car VSP1 1-D Histogram"; break;
default:
/* Compressed formats */
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 7078deef2c64..09cf3a32faf4 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -676,6 +676,9 @@ struct v4l2_pix_format {
#define V4L2_TCH_FMT_TU16 v4l2_fourcc('T', 'U', '1', '6') /* 16-bit unsigned touch data */
#define V4L2_TCH_FMT_TU08 v4l2_fourcc('T', 'U', '0', '8') /* 8-bit unsigned touch data */
+/* Meta-data formats */
+#define V4L2_META_FMT_VSP1_HGO v4l2_fourcc('V', 'S', 'P', 'H') /* R-Car VSP1 Histogram */
+
/* priv field value to indicates that subsequent fields are valid. */
#define V4L2_PIX_FMT_PRIV_MAGIC 0xfeedcafe
--
2.11.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCHv4 08/15] v4l: vsp1: Add HGO support
2017-04-10 19:26 [PATCHv4 00/15] R-Car VSP1 Histogram Support Hans Verkuil
` (6 preceding siblings ...)
2017-04-10 19:26 ` [PATCHv4 07/15] v4l: Define a pixel format for the R-Car VSP1 1-D histogram engine Hans Verkuil
@ 2017-04-10 19:26 ` Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 09/15] v4l: Define a pixel format for the R-Car VSP1 2-D histogram engine Hans Verkuil
` (8 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Hans Verkuil @ 2017-04-10 19:26 UTC (permalink / raw)
To: linux-media; +Cc: Laurent Pinchart, Sakari Ailus, Laurent Pinchart
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The HGO is a Histogram Generator One-Dimension. It computes per-channel
histograms over a configurable region of the image with optional
subsampling.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
drivers/media/platform/vsp1/Makefile | 2 +-
drivers/media/platform/vsp1/vsp1.h | 3 +
drivers/media/platform/vsp1/vsp1_drv.c | 42 ++++--
drivers/media/platform/vsp1/vsp1_entity.c | 16 +++
drivers/media/platform/vsp1/vsp1_hgo.c | 228 ++++++++++++++++++++++++++++++
drivers/media/platform/vsp1/vsp1_hgo.h | 45 ++++++
drivers/media/platform/vsp1/vsp1_pipe.c | 16 +++
drivers/media/platform/vsp1/vsp1_pipe.h | 2 +
drivers/media/platform/vsp1/vsp1_regs.h | 20 ++-
drivers/media/platform/vsp1/vsp1_video.c | 6 +
10 files changed, 367 insertions(+), 13 deletions(-)
create mode 100644 drivers/media/platform/vsp1/vsp1_hgo.c
create mode 100644 drivers/media/platform/vsp1/vsp1_hgo.h
diff --git a/drivers/media/platform/vsp1/Makefile b/drivers/media/platform/vsp1/Makefile
index c559536f7867..8ab6a063569e 100644
--- a/drivers/media/platform/vsp1/Makefile
+++ b/drivers/media/platform/vsp1/Makefile
@@ -3,7 +3,7 @@ vsp1-y += vsp1_dl.o vsp1_drm.o vsp1_video.o
vsp1-y += vsp1_rpf.o vsp1_rwpf.o vsp1_wpf.o
vsp1-y += vsp1_clu.o vsp1_hsit.o vsp1_lut.o
vsp1-y += vsp1_bru.o vsp1_sru.o vsp1_uds.o
-vsp1-y += vsp1_histo.o
+vsp1-y += vsp1_hgo.o vsp1_histo.o
vsp1-y += vsp1_lif.o
obj-$(CONFIG_VIDEO_RENESAS_VSP1) += vsp1.o
diff --git a/drivers/media/platform/vsp1/vsp1.h b/drivers/media/platform/vsp1/vsp1.h
index b23fa879a9aa..0ba7521c01b4 100644
--- a/drivers/media/platform/vsp1/vsp1.h
+++ b/drivers/media/platform/vsp1/vsp1.h
@@ -32,6 +32,7 @@ struct vsp1_entity;
struct vsp1_platform_data;
struct vsp1_bru;
struct vsp1_clu;
+struct vsp1_hgo;
struct vsp1_hsit;
struct vsp1_lif;
struct vsp1_lut;
@@ -50,6 +51,7 @@ struct vsp1_uds;
#define VSP1_HAS_CLU (1 << 4)
#define VSP1_HAS_WPF_VFLIP (1 << 5)
#define VSP1_HAS_WPF_HFLIP (1 << 6)
+#define VSP1_HAS_HGO (1 << 7)
struct vsp1_device_info {
u32 version;
@@ -73,6 +75,7 @@ struct vsp1_device {
struct vsp1_bru *bru;
struct vsp1_clu *clu;
+ struct vsp1_hgo *hgo;
struct vsp1_hsit *hsi;
struct vsp1_hsit *hst;
struct vsp1_lif *lif;
diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c
index 83a6669a6328..0acc8ed6ac59 100644
--- a/drivers/media/platform/vsp1/vsp1_drv.c
+++ b/drivers/media/platform/vsp1/vsp1_drv.c
@@ -30,6 +30,7 @@
#include "vsp1_clu.h"
#include "vsp1_dl.h"
#include "vsp1_drm.h"
+#include "vsp1_hgo.h"
#include "vsp1_hsit.h"
#include "vsp1_lif.h"
#include "vsp1_lut.h"
@@ -150,6 +151,16 @@ static int vsp1_uapi_create_links(struct vsp1_device *vsp1)
return ret;
}
+ if (vsp1->hgo) {
+ ret = media_create_pad_link(&vsp1->hgo->histo.entity.subdev.entity,
+ HISTO_PAD_SOURCE,
+ &vsp1->hgo->histo.video.entity, 0,
+ MEDIA_LNK_FL_ENABLED |
+ MEDIA_LNK_FL_IMMUTABLE);
+ if (ret < 0)
+ return ret;
+ }
+
if (vsp1->lif) {
ret = media_create_pad_link(&vsp1->wpf[0]->entity.subdev.entity,
RWPF_PAD_SOURCE,
@@ -283,6 +294,17 @@ static int vsp1_create_entities(struct vsp1_device *vsp1)
list_add_tail(&vsp1->hst->entity.list_dev, &vsp1->entities);
+ if (vsp1->info->features & VSP1_HAS_HGO && vsp1->info->uapi) {
+ vsp1->hgo = vsp1_hgo_create(vsp1);
+ if (IS_ERR(vsp1->hgo)) {
+ ret = PTR_ERR(vsp1->hgo);
+ goto done;
+ }
+
+ list_add_tail(&vsp1->hgo->histo.entity.list_dev,
+ &vsp1->entities);
+ }
+
/*
* The LIF is only supported when used in conjunction with the DU, in
* which case the userspace API is disabled. If the userspace API is
@@ -568,8 +590,8 @@ static const struct vsp1_device_info vsp1_device_infos[] = {
.version = VI6_IP_VERSION_MODEL_VSPS_H2,
.model = "VSP1-S",
.gen = 2,
- .features = VSP1_HAS_BRU | VSP1_HAS_CLU | VSP1_HAS_LUT
- | VSP1_HAS_SRU | VSP1_HAS_WPF_VFLIP,
+ .features = VSP1_HAS_BRU | VSP1_HAS_CLU | VSP1_HAS_HGO
+ | VSP1_HAS_LUT | VSP1_HAS_SRU | VSP1_HAS_WPF_VFLIP,
.rpf_count = 5,
.uds_count = 3,
.wpf_count = 4,
@@ -589,7 +611,8 @@ static const struct vsp1_device_info vsp1_device_infos[] = {
.version = VI6_IP_VERSION_MODEL_VSPD_GEN2,
.model = "VSP1-D",
.gen = 2,
- .features = VSP1_HAS_BRU | VSP1_HAS_LIF | VSP1_HAS_LUT,
+ .features = VSP1_HAS_BRU | VSP1_HAS_HGO | VSP1_HAS_LIF
+ | VSP1_HAS_LUT,
.rpf_count = 4,
.uds_count = 1,
.wpf_count = 1,
@@ -599,8 +622,8 @@ static const struct vsp1_device_info vsp1_device_infos[] = {
.version = VI6_IP_VERSION_MODEL_VSPS_M2,
.model = "VSP1-S",
.gen = 2,
- .features = VSP1_HAS_BRU | VSP1_HAS_CLU | VSP1_HAS_LUT
- | VSP1_HAS_SRU | VSP1_HAS_WPF_VFLIP,
+ .features = VSP1_HAS_BRU | VSP1_HAS_CLU | VSP1_HAS_HGO
+ | VSP1_HAS_LUT | VSP1_HAS_SRU | VSP1_HAS_WPF_VFLIP,
.rpf_count = 5,
.uds_count = 1,
.wpf_count = 4,
@@ -632,8 +655,9 @@ static const struct vsp1_device_info vsp1_device_infos[] = {
.version = VI6_IP_VERSION_MODEL_VSPI_GEN3,
.model = "VSP2-I",
.gen = 3,
- .features = VSP1_HAS_CLU | VSP1_HAS_LUT | VSP1_HAS_SRU
- | VSP1_HAS_WPF_HFLIP | VSP1_HAS_WPF_VFLIP,
+ .features = VSP1_HAS_CLU | VSP1_HAS_HGO | VSP1_HAS_LUT
+ | VSP1_HAS_SRU | VSP1_HAS_WPF_HFLIP
+ | VSP1_HAS_WPF_VFLIP,
.rpf_count = 1,
.uds_count = 1,
.wpf_count = 1,
@@ -651,8 +675,8 @@ static const struct vsp1_device_info vsp1_device_infos[] = {
.version = VI6_IP_VERSION_MODEL_VSPBC_GEN3,
.model = "VSP2-BC",
.gen = 3,
- .features = VSP1_HAS_BRU | VSP1_HAS_CLU | VSP1_HAS_LUT
- | VSP1_HAS_WPF_VFLIP,
+ .features = VSP1_HAS_BRU | VSP1_HAS_CLU | VSP1_HAS_HGO
+ | VSP1_HAS_LUT | VSP1_HAS_WPF_VFLIP,
.rpf_count = 5,
.wpf_count = 1,
.num_bru_inputs = 5,
diff --git a/drivers/media/platform/vsp1/vsp1_entity.c b/drivers/media/platform/vsp1/vsp1_entity.c
index 88a2aae182ba..c1587e3f01cb 100644
--- a/drivers/media/platform/vsp1/vsp1_entity.c
+++ b/drivers/media/platform/vsp1/vsp1_entity.c
@@ -37,6 +37,21 @@ void vsp1_entity_route_setup(struct vsp1_entity *entity,
struct vsp1_entity *source;
struct vsp1_entity *sink;
+ if (entity->type == VSP1_ENTITY_HGO) {
+ u32 smppt;
+
+ /*
+ * The HGO is a special case, its routing is configured on the
+ * sink pad.
+ */
+ source = media_entity_to_vsp1_entity(entity->sources[0]);
+ smppt = (pipe->output->entity.index << VI6_DPR_SMPPT_TGW_SHIFT)
+ | (source->route->output << VI6_DPR_SMPPT_PT_SHIFT);
+
+ vsp1_dl_list_write(dl, VI6_DPR_HGO_SMPPT, smppt);
+ return;
+ }
+
source = entity;
if (source->route->reg == 0)
return;
@@ -427,6 +442,7 @@ static const struct vsp1_route vsp1_routes[] = {
VI6_DPR_NODE_BRU_IN(2), VI6_DPR_NODE_BRU_IN(3),
VI6_DPR_NODE_BRU_IN(4) }, VI6_DPR_NODE_BRU_OUT },
VSP1_ENTITY_ROUTE(CLU),
+ { VSP1_ENTITY_HGO, 0, 0, { 0, }, 0 },
VSP1_ENTITY_ROUTE(HSI),
VSP1_ENTITY_ROUTE(HST),
{ VSP1_ENTITY_LIF, 0, 0, { VI6_DPR_NODE_LIF, }, VI6_DPR_NODE_LIF },
diff --git a/drivers/media/platform/vsp1/vsp1_hgo.c b/drivers/media/platform/vsp1/vsp1_hgo.c
new file mode 100644
index 000000000000..a138c6b7fb05
--- /dev/null
+++ b/drivers/media/platform/vsp1/vsp1_hgo.c
@@ -0,0 +1,228 @@
+/*
+ * vsp1_hgo.c -- R-Car VSP1 Histogram Generator 1D
+ *
+ * Copyright (C) 2016 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/gfp.h>
+
+#include <media/v4l2-subdev.h>
+#include <media/videobuf2-vmalloc.h>
+
+#include "vsp1.h"
+#include "vsp1_dl.h"
+#include "vsp1_hgo.h"
+
+#define HGO_DATA_SIZE ((2 + 256) * 4)
+
+/* -----------------------------------------------------------------------------
+ * Device Access
+ */
+
+static inline u32 vsp1_hgo_read(struct vsp1_hgo *hgo, u32 reg)
+{
+ return vsp1_read(hgo->histo.entity.vsp1, reg);
+}
+
+static inline void vsp1_hgo_write(struct vsp1_hgo *hgo, struct vsp1_dl_list *dl,
+ u32 reg, u32 data)
+{
+ vsp1_dl_list_write(dl, reg, data);
+}
+
+/* -----------------------------------------------------------------------------
+ * Frame End Handler
+ */
+
+void vsp1_hgo_frame_end(struct vsp1_entity *entity)
+{
+ struct vsp1_hgo *hgo = to_hgo(&entity->subdev);
+ struct vsp1_histogram_buffer *buf;
+ unsigned int i;
+ size_t size;
+ u32 *data;
+
+ buf = vsp1_histogram_buffer_get(&hgo->histo);
+ if (!buf)
+ return;
+
+ data = buf->addr;
+
+ if (hgo->num_bins == 256) {
+ *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_MAXMIN);
+ *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_SUM);
+
+ for (i = 0; i < 256; ++i) {
+ vsp1_write(hgo->histo.entity.vsp1,
+ VI6_HGO_EXT_HIST_ADDR, i);
+ *data++ = vsp1_hgo_read(hgo, VI6_HGO_EXT_HIST_DATA);
+ }
+
+ size = (2 + 256) * sizeof(u32);
+ } else if (hgo->max_rgb) {
+ *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_MAXMIN);
+ *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_SUM);
+
+ for (i = 0; i < 64; ++i)
+ *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_HISTO(i));
+
+ size = (2 + 64) * sizeof(u32);
+ } else {
+ *data++ = vsp1_hgo_read(hgo, VI6_HGO_R_MAXMIN);
+ *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_MAXMIN);
+ *data++ = vsp1_hgo_read(hgo, VI6_HGO_B_MAXMIN);
+
+ *data++ = vsp1_hgo_read(hgo, VI6_HGO_R_SUM);
+ *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_SUM);
+ *data++ = vsp1_hgo_read(hgo, VI6_HGO_B_SUM);
+
+ for (i = 0; i < 64; ++i) {
+ data[i] = vsp1_hgo_read(hgo, VI6_HGO_R_HISTO(i));
+ data[i+64] = vsp1_hgo_read(hgo, VI6_HGO_G_HISTO(i));
+ data[i+128] = vsp1_hgo_read(hgo, VI6_HGO_B_HISTO(i));
+ }
+
+ size = (6 + 64 * 3) * sizeof(u32);
+ }
+
+ vsp1_histogram_buffer_complete(&hgo->histo, buf, size);
+}
+
+/* -----------------------------------------------------------------------------
+ * Controls
+ */
+
+#define V4L2_CID_VSP1_HGO_MAX_RGB (V4L2_CID_USER_BASE | 0x1001)
+#define V4L2_CID_VSP1_HGO_NUM_BINS (V4L2_CID_USER_BASE | 0x1002)
+
+static const struct v4l2_ctrl_config hgo_max_rgb_control = {
+ .id = V4L2_CID_VSP1_HGO_MAX_RGB,
+ .name = "Maximum RGB Mode",
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .min = 0,
+ .max = 1,
+ .def = 0,
+ .step = 1,
+};
+
+static const s64 hgo_num_bins[] = {
+ 64, 256,
+};
+
+static const struct v4l2_ctrl_config hgo_num_bins_control = {
+ .id = V4L2_CID_VSP1_HGO_NUM_BINS,
+ .name = "Number of Bins",
+ .type = V4L2_CTRL_TYPE_INTEGER_MENU,
+ .min = 0,
+ .max = 1,
+ .def = 0,
+ .qmenu_int = hgo_num_bins,
+};
+
+/* -----------------------------------------------------------------------------
+ * VSP1 Entity Operations
+ */
+
+static void hgo_configure(struct vsp1_entity *entity,
+ struct vsp1_pipeline *pipe,
+ struct vsp1_dl_list *dl,
+ enum vsp1_entity_params params)
+{
+ struct vsp1_hgo *hgo = to_hgo(&entity->subdev);
+ struct v4l2_rect *compose;
+ struct v4l2_rect *crop;
+ unsigned int hratio;
+ unsigned int vratio;
+
+ if (params != VSP1_ENTITY_PARAMS_INIT)
+ return;
+
+ crop = vsp1_entity_get_pad_selection(entity, entity->config,
+ HISTO_PAD_SINK, V4L2_SEL_TGT_CROP);
+ compose = vsp1_entity_get_pad_selection(entity, entity->config,
+ HISTO_PAD_SINK,
+ V4L2_SEL_TGT_COMPOSE);
+
+ vsp1_hgo_write(hgo, dl, VI6_HGO_REGRST, VI6_HGO_REGRST_RCLEA);
+
+ vsp1_hgo_write(hgo, dl, VI6_HGO_OFFSET,
+ (crop->left << VI6_HGO_OFFSET_HOFFSET_SHIFT) |
+ (crop->top << VI6_HGO_OFFSET_VOFFSET_SHIFT));
+ vsp1_hgo_write(hgo, dl, VI6_HGO_SIZE,
+ (crop->width << VI6_HGO_SIZE_HSIZE_SHIFT) |
+ (crop->height << VI6_HGO_SIZE_VSIZE_SHIFT));
+
+ mutex_lock(hgo->ctrls.handler.lock);
+ hgo->max_rgb = hgo->ctrls.max_rgb->cur.val;
+ if (hgo->ctrls.num_bins)
+ hgo->num_bins = hgo_num_bins[hgo->ctrls.num_bins->cur.val];
+ mutex_unlock(hgo->ctrls.handler.lock);
+
+ hratio = crop->width * 2 / compose->width / 3;
+ vratio = crop->height * 2 / compose->height / 3;
+ vsp1_hgo_write(hgo, dl, VI6_HGO_MODE,
+ (hgo->num_bins == 256 ? VI6_HGO_MODE_STEP : 0) |
+ (hgo->max_rgb ? VI6_HGO_MODE_MAXRGB : 0) |
+ (hratio << VI6_HGO_MODE_HRATIO_SHIFT) |
+ (vratio << VI6_HGO_MODE_VRATIO_SHIFT));
+}
+
+static const struct vsp1_entity_operations hgo_entity_ops = {
+ .configure = hgo_configure,
+ .destroy = vsp1_histogram_destroy,
+};
+
+/* -----------------------------------------------------------------------------
+ * Initialization and Cleanup
+ */
+
+static const unsigned int hgo_mbus_formats[] = {
+ MEDIA_BUS_FMT_AYUV8_1X32,
+ MEDIA_BUS_FMT_ARGB8888_1X32,
+ MEDIA_BUS_FMT_AHSV8888_1X32,
+};
+
+struct vsp1_hgo *vsp1_hgo_create(struct vsp1_device *vsp1)
+{
+ struct vsp1_hgo *hgo;
+ int ret;
+
+ hgo = devm_kzalloc(vsp1->dev, sizeof(*hgo), GFP_KERNEL);
+ if (hgo == NULL)
+ return ERR_PTR(-ENOMEM);
+
+ /* Initialize the control handler. */
+ v4l2_ctrl_handler_init(&hgo->ctrls.handler,
+ vsp1->info->gen == 3 ? 2 : 1);
+ hgo->ctrls.max_rgb = v4l2_ctrl_new_custom(&hgo->ctrls.handler,
+ &hgo_max_rgb_control, NULL);
+ if (vsp1->info->gen == 3)
+ hgo->ctrls.num_bins =
+ v4l2_ctrl_new_custom(&hgo->ctrls.handler,
+ &hgo_num_bins_control, NULL);
+
+ hgo->max_rgb = false;
+ hgo->num_bins = 64;
+
+ hgo->histo.entity.subdev.ctrl_handler = &hgo->ctrls.handler;
+
+ /* Initialize the video device and queue for statistics data. */
+ ret = vsp1_histogram_init(vsp1, &hgo->histo, VSP1_ENTITY_HGO, "hgo",
+ &hgo_entity_ops, hgo_mbus_formats,
+ ARRAY_SIZE(hgo_mbus_formats),
+ HGO_DATA_SIZE, V4L2_META_FMT_VSP1_HGO);
+ if (ret < 0) {
+ vsp1_entity_destroy(&hgo->histo.entity);
+ return ERR_PTR(ret);
+ }
+
+ return hgo;
+}
diff --git a/drivers/media/platform/vsp1/vsp1_hgo.h b/drivers/media/platform/vsp1/vsp1_hgo.h
new file mode 100644
index 000000000000..c6c0b7a80e0c
--- /dev/null
+++ b/drivers/media/platform/vsp1/vsp1_hgo.h
@@ -0,0 +1,45 @@
+/*
+ * vsp1_hgo.h -- R-Car VSP1 Histogram Generator 1D
+ *
+ * Copyright (C) 2016 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __VSP1_HGO_H__
+#define __VSP1_HGO_H__
+
+#include <media/media-entity.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
+
+#include "vsp1_histo.h"
+
+struct vsp1_device;
+
+struct vsp1_hgo {
+ struct vsp1_histogram histo;
+
+ struct {
+ struct v4l2_ctrl_handler handler;
+ struct v4l2_ctrl *max_rgb;
+ struct v4l2_ctrl *num_bins;
+ } ctrls;
+
+ bool max_rgb;
+ unsigned int num_bins;
+};
+
+static inline struct vsp1_hgo *to_hgo(struct v4l2_subdev *subdev)
+{
+ return container_of(subdev, struct vsp1_hgo, histo.entity.subdev);
+}
+
+struct vsp1_hgo *vsp1_hgo_create(struct vsp1_device *vsp1);
+void vsp1_hgo_frame_end(struct vsp1_entity *hgo);
+
+#endif /* __VSP1_HGO_H__ */
diff --git a/drivers/media/platform/vsp1/vsp1_pipe.c b/drivers/media/platform/vsp1/vsp1_pipe.c
index b5a765cbfc86..bc0460c24397 100644
--- a/drivers/media/platform/vsp1/vsp1_pipe.c
+++ b/drivers/media/platform/vsp1/vsp1_pipe.c
@@ -23,6 +23,7 @@
#include "vsp1_bru.h"
#include "vsp1_dl.h"
#include "vsp1_entity.h"
+#include "vsp1_hgo.h"
#include "vsp1_pipe.h"
#include "vsp1_rwpf.h"
#include "vsp1_uds.h"
@@ -204,11 +205,18 @@ void vsp1_pipeline_reset(struct vsp1_pipeline *pipe)
pipe->output = NULL;
}
+ if (pipe->hgo) {
+ struct vsp1_hgo *hgo = to_hgo(&pipe->hgo->subdev);
+
+ hgo->histo.pipe = NULL;
+ }
+
INIT_LIST_HEAD(&pipe->entities);
pipe->state = VSP1_PIPELINE_STOPPED;
pipe->buffers_ready = 0;
pipe->num_inputs = 0;
pipe->bru = NULL;
+ pipe->hgo = NULL;
pipe->lif = NULL;
pipe->uds = NULL;
}
@@ -286,6 +294,11 @@ int vsp1_pipeline_stop(struct vsp1_pipeline *pipe)
VI6_DPR_NODE_UNUSED);
}
+ if (pipe->hgo)
+ vsp1_write(vsp1, VI6_DPR_HGO_SMPPT,
+ (7 << VI6_DPR_SMPPT_TGW_SHIFT) |
+ (VI6_DPR_NODE_UNUSED << VI6_DPR_SMPPT_PT_SHIFT));
+
v4l2_subdev_call(&pipe->output->entity.subdev, video, s_stream, 0);
return ret;
@@ -309,6 +322,9 @@ void vsp1_pipeline_frame_end(struct vsp1_pipeline *pipe)
vsp1_dlm_irq_frame_end(pipe->output->dlm);
+ if (pipe->hgo)
+ vsp1_hgo_frame_end(pipe->hgo);
+
if (pipe->frame_end)
pipe->frame_end(pipe);
diff --git a/drivers/media/platform/vsp1/vsp1_pipe.h b/drivers/media/platform/vsp1/vsp1_pipe.h
index 1144bf1e671a..4d91088c386b 100644
--- a/drivers/media/platform/vsp1/vsp1_pipe.h
+++ b/drivers/media/platform/vsp1/vsp1_pipe.h
@@ -73,6 +73,7 @@ enum vsp1_pipeline_state {
* @inputs: array of RPFs in the pipeline (indexed by RPF index)
* @output: WPF at the output of the pipeline
* @bru: BRU entity, if present
+ * @hgo: HGO entity, if present
* @lif: LIF entity, if present
* @uds: UDS entity, if present
* @uds_input: entity at the input of the UDS, if the UDS is present
@@ -101,6 +102,7 @@ struct vsp1_pipeline {
struct vsp1_rwpf *inputs[VSP1_MAX_RPF];
struct vsp1_rwpf *output;
struct vsp1_entity *bru;
+ struct vsp1_entity *hgo;
struct vsp1_entity *lif;
struct vsp1_entity *uds;
struct vsp1_entity *uds_input;
diff --git a/drivers/media/platform/vsp1/vsp1_regs.h b/drivers/media/platform/vsp1/vsp1_regs.h
index 61369e267667..5414e519f7d8 100644
--- a/drivers/media/platform/vsp1/vsp1_regs.h
+++ b/drivers/media/platform/vsp1/vsp1_regs.h
@@ -590,24 +590,38 @@
*/
#define VI6_HGO_OFFSET 0x3000
+#define VI6_HGO_OFFSET_HOFFSET_SHIFT 16
+#define VI6_HGO_OFFSET_VOFFSET_SHIFT 0
#define VI6_HGO_SIZE 0x3004
+#define VI6_HGO_SIZE_HSIZE_SHIFT 16
+#define VI6_HGO_SIZE_VSIZE_SHIFT 0
#define VI6_HGO_MODE 0x3008
+#define VI6_HGO_MODE_STEP (1 << 10)
+#define VI6_HGO_MODE_MAXRGB (1 << 7)
+#define VI6_HGO_MODE_OFSB_R (1 << 6)
+#define VI6_HGO_MODE_OFSB_G (1 << 5)
+#define VI6_HGO_MODE_OFSB_B (1 << 4)
+#define VI6_HGO_MODE_HRATIO_SHIFT 2
+#define VI6_HGO_MODE_VRATIO_SHIFT 0
#define VI6_HGO_LB_TH 0x300c
#define VI6_HGO_LBn_H(n) (0x3010 + (n) * 8)
#define VI6_HGO_LBn_V(n) (0x3014 + (n) * 8)
-#define VI6_HGO_R_HISTO 0x3030
+#define VI6_HGO_R_HISTO(n) (0x3030 + (n) * 4)
#define VI6_HGO_R_MAXMIN 0x3130
#define VI6_HGO_R_SUM 0x3134
#define VI6_HGO_R_LB_DET 0x3138
-#define VI6_HGO_G_HISTO 0x3140
+#define VI6_HGO_G_HISTO(n) (0x3140 + (n) * 4)
#define VI6_HGO_G_MAXMIN 0x3240
#define VI6_HGO_G_SUM 0x3244
#define VI6_HGO_G_LB_DET 0x3248
-#define VI6_HGO_B_HISTO 0x3250
+#define VI6_HGO_B_HISTO(n) (0x3250 + (n) * 4)
#define VI6_HGO_B_MAXMIN 0x3350
#define VI6_HGO_B_SUM 0x3354
#define VI6_HGO_B_LB_DET 0x3358
+#define VI6_HGO_EXT_HIST_ADDR 0x335c
+#define VI6_HGO_EXT_HIST_DATA 0x3360
#define VI6_HGO_REGRST 0x33fc
+#define VI6_HGO_REGRST_RCLEA (1 << 0)
/* -----------------------------------------------------------------------------
* HGT Control Registers
diff --git a/drivers/media/platform/vsp1/vsp1_video.c b/drivers/media/platform/vsp1/vsp1_video.c
index 86c33994468b..7bc07d438367 100644
--- a/drivers/media/platform/vsp1/vsp1_video.c
+++ b/drivers/media/platform/vsp1/vsp1_video.c
@@ -31,6 +31,7 @@
#include "vsp1_bru.h"
#include "vsp1_dl.h"
#include "vsp1_entity.h"
+#include "vsp1_hgo.h"
#include "vsp1_pipe.h"
#include "vsp1_rwpf.h"
#include "vsp1_uds.h"
@@ -601,6 +602,11 @@ static int vsp1_video_pipeline_build(struct vsp1_pipeline *pipe,
pipe->lif = e;
} else if (e->type == VSP1_ENTITY_BRU) {
pipe->bru = e;
+ } else if (e->type == VSP1_ENTITY_HGO) {
+ struct vsp1_hgo *hgo = to_hgo(subdev);
+
+ pipe->hgo = e;
+ hgo->histo.pipe = pipe;
}
}
--
2.11.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCHv4 09/15] v4l: Define a pixel format for the R-Car VSP1 2-D histogram engine
2017-04-10 19:26 [PATCHv4 00/15] R-Car VSP1 Histogram Support Hans Verkuil
` (7 preceding siblings ...)
2017-04-10 19:26 ` [PATCHv4 08/15] v4l: vsp1: Add HGO support Hans Verkuil
@ 2017-04-10 19:26 ` Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 10/15] v4l: vsp1: Add HGT support Hans Verkuil
` (7 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Hans Verkuil @ 2017-04-10 19:26 UTC (permalink / raw)
To: linux-media
Cc: Laurent Pinchart, Sakari Ailus, Niklas Söderlund, Laurent Pinchart
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
The format is used on the R-Car VSP1 video queues that carry
2-D histogram statistics data.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
Documentation/media/uapi/v4l/meta-formats.rst | 1 +
.../media/uapi/v4l/pixfmt-meta-vsp1-hgt.rst | 120 +++++++++++++++++++++
drivers/media/v4l2-core/v4l2-ioctl.c | 1 +
include/uapi/linux/videodev2.h | 3 +-
4 files changed, 124 insertions(+), 1 deletion(-)
create mode 100644 Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgt.rst
diff --git a/Documentation/media/uapi/v4l/meta-formats.rst b/Documentation/media/uapi/v4l/meta-formats.rst
index 05ab91e12f10..01e24e3df571 100644
--- a/Documentation/media/uapi/v4l/meta-formats.rst
+++ b/Documentation/media/uapi/v4l/meta-formats.rst
@@ -13,3 +13,4 @@ These formats are used for the :ref:`metadata` interface only.
:maxdepth: 1
pixfmt-meta-vsp1-hgo
+ pixfmt-meta-vsp1-hgt
diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgt.rst b/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgt.rst
new file mode 100644
index 000000000000..fb9f79466319
--- /dev/null
+++ b/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgt.rst
@@ -0,0 +1,120 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _v4l2-meta-fmt-vsp1-hgt:
+
+*******************************
+V4L2_META_FMT_VSP1_HGT ('VSPT')
+*******************************
+
+Renesas R-Car VSP1 2-D Histogram Data
+
+
+Description
+===========
+
+This format describes histogram data generated by the Renesas R-Car VSP1
+2-D Histogram (HGT) engine.
+
+The VSP1 HGT is a histogram computation engine that operates on HSV
+data. It operates on a possibly cropped and subsampled input image and
+computes the sum, maximum and minimum of the S component as well as a
+weighted frequency histogram based on the H and S components.
+
+The histogram is a matrix of 6 Hue and 32 Saturation buckets, 192 in
+total. Each HSV value is added to one or more buckets with a weight
+between 1 and 16 depending on the Hue areas configuration. Finding the
+corresponding buckets is done by inspecting the H and S value independently.
+
+The Saturation position **n** (0 - 31) of the bucket in the matrix is
+found by the expression:
+
+ n = S / 8
+
+The Hue position **m** (0 - 5) of the bucket in the matrix depends on
+how the HGT Hue areas are configured. There are 6 user configurable Hue
+Areas which can be configured to cover overlapping Hue values:
+
+::
+
+ Area 0 Area 1 Area 2 Area 3 Area 4 Area 5
+ ________ ________ ________ ________ ________ ________
+ \ /| |\ /| |\ /| |\ /| |\ /| |\ /| |\ /
+ \ / | | \ / | | \ / | | \ / | | \ / | | \ / | | \ /
+ X | | X | | X | | X | | X | | X | | X
+ / \ | | / \ | | / \ | | / \ | | / \ | | / \ | | / \
+ / \| |/ \| |/ \| |/ \| |/ \| |/ \| |/ \
+ 5U 0L 0U 1L 1U 2L 2U 3L 3U 4L 4U 5L 5U 0L
+ <0..............................Hue Value............................255>
+
+When two consecutive areas don't overlap (n+1L is equal to nU) the boundary
+value is considered as part of the lower area.
+
+Pixels with a hue value included in the centre of an area (between nL and nU
+included) are attributed to that single area and given a weight of 16. Pixels
+with a hue value included in the overlapping region between two areas (between
+n+1L and nU excluded) are attributed to both areas and given a weight for each
+of these areas proportional to their position along the diagonal lines
+(rounded down).
+
+The Hue area setup must match one of the following constrains:
+
+::
+
+ 0L <= 0U <= 1L <= 1U <= 2L <= 2U <= 3L <= 3U <= 4L <= 4U <= 5L <= 5U
+
+::
+
+ 0U <= 1L <= 1U <= 2L <= 2U <= 3L <= 3U <= 4L <= 4U <= 5L <= 5U <= 0L
+
+**Byte Order.**
+All data is stored in memory in little endian format. Each cell in the tables
+contains one byte.
+
+.. flat-table:: VSP1 HGT Data - (776 bytes)
+ :header-rows: 2
+ :stub-columns: 0
+
+ * - Offset
+ - :cspan:`4` Memory
+ * -
+ - [31:24]
+ - [23:16]
+ - [15:8]
+ - [7:0]
+ * - 0
+ - -
+ - S max [7:0]
+ - -
+ - S min [7:0]
+ * - 4
+ - :cspan:`4` S sum [31:0]
+ * - 8
+ - :cspan:`4` Histogram bucket (m=0, n=0) [31:0]
+ * - 12
+ - :cspan:`4` Histogram bucket (m=0, n=1) [31:0]
+ * -
+ - :cspan:`4` ...
+ * - 132
+ - :cspan:`4` Histogram bucket (m=0, n=31) [31:0]
+ * - 136
+ - :cspan:`4` Histogram bucket (m=1, n=0) [31:0]
+ * -
+ - :cspan:`4` ...
+ * - 264
+ - :cspan:`4` Histogram bucket (m=2, n=0) [31:0]
+ * -
+ - :cspan:`4` ...
+ * - 392
+ - :cspan:`4` Histogram bucket (m=3, n=0) [31:0]
+ * -
+ - :cspan:`4` ...
+ * - 520
+ - :cspan:`4` Histogram bucket (m=4, n=0) [31:0]
+ * -
+ - :cspan:`4` ...
+ * - 648
+ - :cspan:`4` Histogram bucket (m=5, n=0) [31:0]
+ * -
+ - :cspan:`4` ...
+ * - 772
+ - :cspan:`4` Histogram bucket (m=5, n=31) [31:0]
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index a7c50241594e..e5a2187381db 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -1234,6 +1234,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
case V4L2_TCH_FMT_TU16: descr = "16-bit unsigned touch data"; break;
case V4L2_TCH_FMT_TU08: descr = "8-bit unsigned touch data"; break;
case V4L2_META_FMT_VSP1_HGO: descr = "R-Car VSP1 1-D Histogram"; break;
+ case V4L2_META_FMT_VSP1_HGT: descr = "R-Car VSP1 2-D Histogram"; break;
default:
/* Compressed formats */
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 09cf3a32faf4..75f032448ae5 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -677,7 +677,8 @@ struct v4l2_pix_format {
#define V4L2_TCH_FMT_TU08 v4l2_fourcc('T', 'U', '0', '8') /* 8-bit unsigned touch data */
/* Meta-data formats */
-#define V4L2_META_FMT_VSP1_HGO v4l2_fourcc('V', 'S', 'P', 'H') /* R-Car VSP1 Histogram */
+#define V4L2_META_FMT_VSP1_HGO v4l2_fourcc('V', 'S', 'P', 'H') /* R-Car VSP1 1-D Histogram */
+#define V4L2_META_FMT_VSP1_HGT v4l2_fourcc('V', 'S', 'P', 'T') /* R-Car VSP1 2-D Histogram */
/* priv field value to indicates that subsequent fields are valid. */
#define V4L2_PIX_FMT_PRIV_MAGIC 0xfeedcafe
--
2.11.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCHv4 10/15] v4l: vsp1: Add HGT support
2017-04-10 19:26 [PATCHv4 00/15] R-Car VSP1 Histogram Support Hans Verkuil
` (8 preceding siblings ...)
2017-04-10 19:26 ` [PATCHv4 09/15] v4l: Define a pixel format for the R-Car VSP1 2-D histogram engine Hans Verkuil
@ 2017-04-10 19:26 ` Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 11/15] vidioc-queryctrl.rst: document V4L2_CTRL_FLAG_MODIFY_LAYOUT Hans Verkuil
` (6 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Hans Verkuil @ 2017-04-10 19:26 UTC (permalink / raw)
To: linux-media
Cc: Laurent Pinchart, Sakari Ailus, Niklas Söderlund, Laurent Pinchart
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
The HGT is a Histogram Generator Two-Dimensions. It computes a weighted
frequency histograms for hue and saturation areas over a configurable
region of the image with optional subsampling.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
drivers/media/platform/vsp1/Makefile | 2 +-
drivers/media/platform/vsp1/vsp1.h | 3 +
drivers/media/platform/vsp1/vsp1_drv.c | 32 ++++-
drivers/media/platform/vsp1/vsp1_entity.c | 14 ++
drivers/media/platform/vsp1/vsp1_hgt.c | 222 ++++++++++++++++++++++++++++++
drivers/media/platform/vsp1/vsp1_hgt.h | 42 ++++++
drivers/media/platform/vsp1/vsp1_pipe.c | 16 +++
drivers/media/platform/vsp1/vsp1_pipe.h | 2 +
drivers/media/platform/vsp1/vsp1_regs.h | 9 ++
drivers/media/platform/vsp1/vsp1_video.c | 6 +
10 files changed, 343 insertions(+), 5 deletions(-)
create mode 100644 drivers/media/platform/vsp1/vsp1_hgt.c
create mode 100644 drivers/media/platform/vsp1/vsp1_hgt.h
diff --git a/drivers/media/platform/vsp1/Makefile b/drivers/media/platform/vsp1/Makefile
index 8ab6a063569e..a33afc385a48 100644
--- a/drivers/media/platform/vsp1/Makefile
+++ b/drivers/media/platform/vsp1/Makefile
@@ -3,7 +3,7 @@ vsp1-y += vsp1_dl.o vsp1_drm.o vsp1_video.o
vsp1-y += vsp1_rpf.o vsp1_rwpf.o vsp1_wpf.o
vsp1-y += vsp1_clu.o vsp1_hsit.o vsp1_lut.o
vsp1-y += vsp1_bru.o vsp1_sru.o vsp1_uds.o
-vsp1-y += vsp1_hgo.o vsp1_histo.o
+vsp1-y += vsp1_hgo.o vsp1_hgt.o vsp1_histo.o
vsp1-y += vsp1_lif.o
obj-$(CONFIG_VIDEO_RENESAS_VSP1) += vsp1.o
diff --git a/drivers/media/platform/vsp1/vsp1.h b/drivers/media/platform/vsp1/vsp1.h
index 0ba7521c01b4..85387a64179a 100644
--- a/drivers/media/platform/vsp1/vsp1.h
+++ b/drivers/media/platform/vsp1/vsp1.h
@@ -33,6 +33,7 @@ struct vsp1_platform_data;
struct vsp1_bru;
struct vsp1_clu;
struct vsp1_hgo;
+struct vsp1_hgt;
struct vsp1_hsit;
struct vsp1_lif;
struct vsp1_lut;
@@ -52,6 +53,7 @@ struct vsp1_uds;
#define VSP1_HAS_WPF_VFLIP (1 << 5)
#define VSP1_HAS_WPF_HFLIP (1 << 6)
#define VSP1_HAS_HGO (1 << 7)
+#define VSP1_HAS_HGT (1 << 8)
struct vsp1_device_info {
u32 version;
@@ -76,6 +78,7 @@ struct vsp1_device {
struct vsp1_bru *bru;
struct vsp1_clu *clu;
struct vsp1_hgo *hgo;
+ struct vsp1_hgt *hgt;
struct vsp1_hsit *hsi;
struct vsp1_hsit *hst;
struct vsp1_lif *lif;
diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c
index 0acc8ed6ac59..048446af5ae7 100644
--- a/drivers/media/platform/vsp1/vsp1_drv.c
+++ b/drivers/media/platform/vsp1/vsp1_drv.c
@@ -31,6 +31,7 @@
#include "vsp1_dl.h"
#include "vsp1_drm.h"
#include "vsp1_hgo.h"
+#include "vsp1_hgt.h"
#include "vsp1_hsit.h"
#include "vsp1_lif.h"
#include "vsp1_lut.h"
@@ -161,6 +162,16 @@ static int vsp1_uapi_create_links(struct vsp1_device *vsp1)
return ret;
}
+ if (vsp1->hgt) {
+ ret = media_create_pad_link(&vsp1->hgt->histo.entity.subdev.entity,
+ HISTO_PAD_SOURCE,
+ &vsp1->hgt->histo.video.entity, 0,
+ MEDIA_LNK_FL_ENABLED |
+ MEDIA_LNK_FL_IMMUTABLE);
+ if (ret < 0)
+ return ret;
+ }
+
if (vsp1->lif) {
ret = media_create_pad_link(&vsp1->wpf[0]->entity.subdev.entity,
RWPF_PAD_SOURCE,
@@ -305,6 +316,17 @@ static int vsp1_create_entities(struct vsp1_device *vsp1)
&vsp1->entities);
}
+ if (vsp1->info->features & VSP1_HAS_HGT && vsp1->info->uapi) {
+ vsp1->hgt = vsp1_hgt_create(vsp1);
+ if (IS_ERR(vsp1->hgt)) {
+ ret = PTR_ERR(vsp1->hgt);
+ goto done;
+ }
+
+ list_add_tail(&vsp1->hgt->histo.entity.list_dev,
+ &vsp1->entities);
+ }
+
/*
* The LIF is only supported when used in conjunction with the DU, in
* which case the userspace API is disabled. If the userspace API is
@@ -591,7 +613,8 @@ static const struct vsp1_device_info vsp1_device_infos[] = {
.model = "VSP1-S",
.gen = 2,
.features = VSP1_HAS_BRU | VSP1_HAS_CLU | VSP1_HAS_HGO
- | VSP1_HAS_LUT | VSP1_HAS_SRU | VSP1_HAS_WPF_VFLIP,
+ | VSP1_HAS_HGT | VSP1_HAS_LUT | VSP1_HAS_SRU
+ | VSP1_HAS_WPF_VFLIP,
.rpf_count = 5,
.uds_count = 3,
.wpf_count = 4,
@@ -623,7 +646,8 @@ static const struct vsp1_device_info vsp1_device_infos[] = {
.model = "VSP1-S",
.gen = 2,
.features = VSP1_HAS_BRU | VSP1_HAS_CLU | VSP1_HAS_HGO
- | VSP1_HAS_LUT | VSP1_HAS_SRU | VSP1_HAS_WPF_VFLIP,
+ | VSP1_HAS_HGT | VSP1_HAS_LUT | VSP1_HAS_SRU
+ | VSP1_HAS_WPF_VFLIP,
.rpf_count = 5,
.uds_count = 1,
.wpf_count = 4,
@@ -655,8 +679,8 @@ static const struct vsp1_device_info vsp1_device_infos[] = {
.version = VI6_IP_VERSION_MODEL_VSPI_GEN3,
.model = "VSP2-I",
.gen = 3,
- .features = VSP1_HAS_CLU | VSP1_HAS_HGO | VSP1_HAS_LUT
- | VSP1_HAS_SRU | VSP1_HAS_WPF_HFLIP
+ .features = VSP1_HAS_CLU | VSP1_HAS_HGO | VSP1_HAS_HGT
+ | VSP1_HAS_LUT | VSP1_HAS_SRU | VSP1_HAS_WPF_HFLIP
| VSP1_HAS_WPF_VFLIP,
.rpf_count = 1,
.uds_count = 1,
diff --git a/drivers/media/platform/vsp1/vsp1_entity.c b/drivers/media/platform/vsp1/vsp1_entity.c
index c1587e3f01cb..4bdb3b141611 100644
--- a/drivers/media/platform/vsp1/vsp1_entity.c
+++ b/drivers/media/platform/vsp1/vsp1_entity.c
@@ -50,6 +50,19 @@ void vsp1_entity_route_setup(struct vsp1_entity *entity,
vsp1_dl_list_write(dl, VI6_DPR_HGO_SMPPT, smppt);
return;
+ } else if (entity->type == VSP1_ENTITY_HGT) {
+ u32 smppt;
+
+ /*
+ * The HGT is a special case, its routing is configured on the
+ * sink pad.
+ */
+ source = media_entity_to_vsp1_entity(entity->sources[0]);
+ smppt = (pipe->output->entity.index << VI6_DPR_SMPPT_TGW_SHIFT)
+ | (source->route->output << VI6_DPR_SMPPT_PT_SHIFT);
+
+ vsp1_dl_list_write(dl, VI6_DPR_HGT_SMPPT, smppt);
+ return;
}
source = entity;
@@ -443,6 +456,7 @@ static const struct vsp1_route vsp1_routes[] = {
VI6_DPR_NODE_BRU_IN(4) }, VI6_DPR_NODE_BRU_OUT },
VSP1_ENTITY_ROUTE(CLU),
{ VSP1_ENTITY_HGO, 0, 0, { 0, }, 0 },
+ { VSP1_ENTITY_HGT, 0, 0, { 0, }, 0 },
VSP1_ENTITY_ROUTE(HSI),
VSP1_ENTITY_ROUTE(HST),
{ VSP1_ENTITY_LIF, 0, 0, { VI6_DPR_NODE_LIF, }, VI6_DPR_NODE_LIF },
diff --git a/drivers/media/platform/vsp1/vsp1_hgt.c b/drivers/media/platform/vsp1/vsp1_hgt.c
new file mode 100644
index 000000000000..b5ce305e3e6f
--- /dev/null
+++ b/drivers/media/platform/vsp1/vsp1_hgt.c
@@ -0,0 +1,222 @@
+/*
+ * vsp1_hgt.c -- R-Car VSP1 Histogram Generator 2D
+ *
+ * Copyright (C) 2016 Renesas Electronics Corporation
+ *
+ * Contact: Niklas Söderlund (niklas.soderlund@ragnatech.se)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/gfp.h>
+
+#include <media/v4l2-subdev.h>
+#include <media/videobuf2-vmalloc.h>
+
+#include "vsp1.h"
+#include "vsp1_dl.h"
+#include "vsp1_hgt.h"
+
+#define HGT_DATA_SIZE ((2 + 6 * 32) * 4)
+
+/* -----------------------------------------------------------------------------
+ * Device Access
+ */
+
+static inline u32 vsp1_hgt_read(struct vsp1_hgt *hgt, u32 reg)
+{
+ return vsp1_read(hgt->histo.entity.vsp1, reg);
+}
+
+static inline void vsp1_hgt_write(struct vsp1_hgt *hgt, struct vsp1_dl_list *dl,
+ u32 reg, u32 data)
+{
+ vsp1_dl_list_write(dl, reg, data);
+}
+
+/* -----------------------------------------------------------------------------
+ * Frame End Handler
+ */
+
+void vsp1_hgt_frame_end(struct vsp1_entity *entity)
+{
+ struct vsp1_hgt *hgt = to_hgt(&entity->subdev);
+ struct vsp1_histogram_buffer *buf;
+ unsigned int m;
+ unsigned int n;
+ u32 *data;
+
+ buf = vsp1_histogram_buffer_get(&hgt->histo);
+ if (!buf)
+ return;
+
+ data = buf->addr;
+
+ *data++ = vsp1_hgt_read(hgt, VI6_HGT_MAXMIN);
+ *data++ = vsp1_hgt_read(hgt, VI6_HGT_SUM);
+
+ for (m = 0; m < 6; ++m)
+ for (n = 0; n < 32; ++n)
+ *data++ = vsp1_hgt_read(hgt, VI6_HGT_HISTO(m, n));
+
+ vsp1_histogram_buffer_complete(&hgt->histo, buf, HGT_DATA_SIZE);
+}
+
+/* -----------------------------------------------------------------------------
+ * Controls
+ */
+
+#define V4L2_CID_VSP1_HGT_HUE_AREAS (V4L2_CID_USER_BASE | 0x1001)
+
+static int hgt_hue_areas_try_ctrl(struct v4l2_ctrl *ctrl)
+{
+ const u8 *values = ctrl->p_new.p_u8;
+ unsigned int i;
+
+ /*
+ * The hardware has constraints on the hue area boundaries beyond the
+ * control min, max and step. The values must match one of the following
+ * expressions.
+ *
+ * 0L <= 0U <= 1L <= 1U <= 2L <= 2U <= 3L <= 3U <= 4L <= 4U <= 5L <= 5U
+ * 0U <= 1L <= 1U <= 2L <= 2U <= 3L <= 3U <= 4L <= 4U <= 5L <= 5U <= 0L
+ *
+ * Start by verifying the common part...
+ */
+ for (i = 1; i < (HGT_NUM_HUE_AREAS * 2) - 1; ++i) {
+ if (values[i] > values[i+1])
+ return -EINVAL;
+ }
+
+ /* ... and handle 0L separately. */
+ if (values[0] > values[1] && values[11] > values[0])
+ return -EINVAL;
+
+ return 0;
+}
+
+static int hgt_hue_areas_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct vsp1_hgt *hgt = container_of(ctrl->handler, struct vsp1_hgt,
+ ctrls);
+
+ memcpy(hgt->hue_areas, ctrl->p_new.p_u8, sizeof(hgt->hue_areas));
+ return 0;
+}
+
+static const struct v4l2_ctrl_ops hgt_hue_areas_ctrl_ops = {
+ .try_ctrl = hgt_hue_areas_try_ctrl,
+ .s_ctrl = hgt_hue_areas_s_ctrl,
+};
+
+static const struct v4l2_ctrl_config hgt_hue_areas = {
+ .ops = &hgt_hue_areas_ctrl_ops,
+ .id = V4L2_CID_VSP1_HGT_HUE_AREAS,
+ .name = "Boundary Values for Hue Area",
+ .type = V4L2_CTRL_TYPE_U8,
+ .min = 0,
+ .max = 255,
+ .def = 0,
+ .step = 1,
+ .dims = { 12 },
+};
+
+/* -----------------------------------------------------------------------------
+ * VSP1 Entity Operations
+ */
+
+static void hgt_configure(struct vsp1_entity *entity,
+ struct vsp1_pipeline *pipe,
+ struct vsp1_dl_list *dl,
+ enum vsp1_entity_params params)
+{
+ struct vsp1_hgt *hgt = to_hgt(&entity->subdev);
+ struct v4l2_rect *compose;
+ struct v4l2_rect *crop;
+ unsigned int hratio;
+ unsigned int vratio;
+ u8 lower;
+ u8 upper;
+ unsigned int i;
+
+ if (params != VSP1_ENTITY_PARAMS_INIT)
+ return;
+
+ crop = vsp1_entity_get_pad_selection(entity, entity->config,
+ HISTO_PAD_SINK, V4L2_SEL_TGT_CROP);
+ compose = vsp1_entity_get_pad_selection(entity, entity->config,
+ HISTO_PAD_SINK,
+ V4L2_SEL_TGT_COMPOSE);
+
+ vsp1_hgt_write(hgt, dl, VI6_HGT_REGRST, VI6_HGT_REGRST_RCLEA);
+
+ vsp1_hgt_write(hgt, dl, VI6_HGT_OFFSET,
+ (crop->left << VI6_HGT_OFFSET_HOFFSET_SHIFT) |
+ (crop->top << VI6_HGT_OFFSET_VOFFSET_SHIFT));
+ vsp1_hgt_write(hgt, dl, VI6_HGT_SIZE,
+ (crop->width << VI6_HGT_SIZE_HSIZE_SHIFT) |
+ (crop->height << VI6_HGT_SIZE_VSIZE_SHIFT));
+
+ mutex_lock(hgt->ctrls.lock);
+ for (i = 0; i < HGT_NUM_HUE_AREAS; ++i) {
+ lower = hgt->hue_areas[i*2 + 0];
+ upper = hgt->hue_areas[i*2 + 1];
+ vsp1_hgt_write(hgt, dl, VI6_HGT_HUE_AREA(i),
+ (lower << VI6_HGT_HUE_AREA_LOWER_SHIFT) |
+ (upper << VI6_HGT_HUE_AREA_UPPER_SHIFT));
+ }
+ mutex_unlock(hgt->ctrls.lock);
+
+ hratio = crop->width * 2 / compose->width / 3;
+ vratio = crop->height * 2 / compose->height / 3;
+ vsp1_hgt_write(hgt, dl, VI6_HGT_MODE,
+ (hratio << VI6_HGT_MODE_HRATIO_SHIFT) |
+ (vratio << VI6_HGT_MODE_VRATIO_SHIFT));
+}
+
+static const struct vsp1_entity_operations hgt_entity_ops = {
+ .configure = hgt_configure,
+ .destroy = vsp1_histogram_destroy,
+};
+
+/* -----------------------------------------------------------------------------
+ * Initialization and Cleanup
+ */
+
+static const unsigned int hgt_mbus_formats[] = {
+ MEDIA_BUS_FMT_AHSV8888_1X32,
+};
+
+struct vsp1_hgt *vsp1_hgt_create(struct vsp1_device *vsp1)
+{
+ struct vsp1_hgt *hgt;
+ int ret;
+
+ hgt = devm_kzalloc(vsp1->dev, sizeof(*hgt), GFP_KERNEL);
+ if (hgt == NULL)
+ return ERR_PTR(-ENOMEM);
+
+ /* Initialize the control handler. */
+ v4l2_ctrl_handler_init(&hgt->ctrls, 1);
+ v4l2_ctrl_new_custom(&hgt->ctrls, &hgt_hue_areas, NULL);
+
+ hgt->histo.entity.subdev.ctrl_handler = &hgt->ctrls;
+
+ /* Initialize the video device and queue for statistics data. */
+ ret = vsp1_histogram_init(vsp1, &hgt->histo, VSP1_ENTITY_HGT, "hgt",
+ &hgt_entity_ops, hgt_mbus_formats,
+ ARRAY_SIZE(hgt_mbus_formats),
+ HGT_DATA_SIZE, V4L2_META_FMT_VSP1_HGT);
+ if (ret < 0) {
+ vsp1_entity_destroy(&hgt->histo.entity);
+ return ERR_PTR(ret);
+ }
+
+ v4l2_ctrl_handler_setup(&hgt->ctrls);
+
+ return hgt;
+}
diff --git a/drivers/media/platform/vsp1/vsp1_hgt.h b/drivers/media/platform/vsp1/vsp1_hgt.h
new file mode 100644
index 000000000000..83f2e130942a
--- /dev/null
+++ b/drivers/media/platform/vsp1/vsp1_hgt.h
@@ -0,0 +1,42 @@
+/*
+ * vsp1_hgt.h -- R-Car VSP1 Histogram Generator 2D
+ *
+ * Copyright (C) 2016 Renesas Electronics Corporation
+ *
+ * Contact: Niklas Söderlund (niklas.soderlund@ragnatech.se)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __VSP1_HGT_H__
+#define __VSP1_HGT_H__
+
+#include <media/media-entity.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
+
+#include "vsp1_histo.h"
+
+struct vsp1_device;
+
+#define HGT_NUM_HUE_AREAS 6
+
+struct vsp1_hgt {
+ struct vsp1_histogram histo;
+
+ struct v4l2_ctrl_handler ctrls;
+
+ u8 hue_areas[HGT_NUM_HUE_AREAS * 2];
+};
+
+static inline struct vsp1_hgt *to_hgt(struct v4l2_subdev *subdev)
+{
+ return container_of(subdev, struct vsp1_hgt, histo.entity.subdev);
+}
+
+struct vsp1_hgt *vsp1_hgt_create(struct vsp1_device *vsp1);
+void vsp1_hgt_frame_end(struct vsp1_entity *hgt);
+
+#endif /* __VSP1_HGT_H__ */
diff --git a/drivers/media/platform/vsp1/vsp1_pipe.c b/drivers/media/platform/vsp1/vsp1_pipe.c
index bc0460c24397..edebf3fa926f 100644
--- a/drivers/media/platform/vsp1/vsp1_pipe.c
+++ b/drivers/media/platform/vsp1/vsp1_pipe.c
@@ -24,6 +24,7 @@
#include "vsp1_dl.h"
#include "vsp1_entity.h"
#include "vsp1_hgo.h"
+#include "vsp1_hgt.h"
#include "vsp1_pipe.h"
#include "vsp1_rwpf.h"
#include "vsp1_uds.h"
@@ -211,12 +212,19 @@ void vsp1_pipeline_reset(struct vsp1_pipeline *pipe)
hgo->histo.pipe = NULL;
}
+ if (pipe->hgt) {
+ struct vsp1_hgt *hgt = to_hgt(&pipe->hgt->subdev);
+
+ hgt->histo.pipe = NULL;
+ }
+
INIT_LIST_HEAD(&pipe->entities);
pipe->state = VSP1_PIPELINE_STOPPED;
pipe->buffers_ready = 0;
pipe->num_inputs = 0;
pipe->bru = NULL;
pipe->hgo = NULL;
+ pipe->hgt = NULL;
pipe->lif = NULL;
pipe->uds = NULL;
}
@@ -299,6 +307,11 @@ int vsp1_pipeline_stop(struct vsp1_pipeline *pipe)
(7 << VI6_DPR_SMPPT_TGW_SHIFT) |
(VI6_DPR_NODE_UNUSED << VI6_DPR_SMPPT_PT_SHIFT));
+ if (pipe->hgt)
+ vsp1_write(vsp1, VI6_DPR_HGT_SMPPT,
+ (7 << VI6_DPR_SMPPT_TGW_SHIFT) |
+ (VI6_DPR_NODE_UNUSED << VI6_DPR_SMPPT_PT_SHIFT));
+
v4l2_subdev_call(&pipe->output->entity.subdev, video, s_stream, 0);
return ret;
@@ -325,6 +338,9 @@ void vsp1_pipeline_frame_end(struct vsp1_pipeline *pipe)
if (pipe->hgo)
vsp1_hgo_frame_end(pipe->hgo);
+ if (pipe->hgt)
+ vsp1_hgt_frame_end(pipe->hgt);
+
if (pipe->frame_end)
pipe->frame_end(pipe);
diff --git a/drivers/media/platform/vsp1/vsp1_pipe.h b/drivers/media/platform/vsp1/vsp1_pipe.h
index 4d91088c386b..91a784a13422 100644
--- a/drivers/media/platform/vsp1/vsp1_pipe.h
+++ b/drivers/media/platform/vsp1/vsp1_pipe.h
@@ -74,6 +74,7 @@ enum vsp1_pipeline_state {
* @output: WPF at the output of the pipeline
* @bru: BRU entity, if present
* @hgo: HGO entity, if present
+ * @hgt: HGT entity, if present
* @lif: LIF entity, if present
* @uds: UDS entity, if present
* @uds_input: entity at the input of the UDS, if the UDS is present
@@ -103,6 +104,7 @@ struct vsp1_pipeline {
struct vsp1_rwpf *output;
struct vsp1_entity *bru;
struct vsp1_entity *hgo;
+ struct vsp1_entity *hgt;
struct vsp1_entity *lif;
struct vsp1_entity *uds;
struct vsp1_entity *uds_input;
diff --git a/drivers/media/platform/vsp1/vsp1_regs.h b/drivers/media/platform/vsp1/vsp1_regs.h
index 5414e519f7d8..cd3e32af6e3b 100644
--- a/drivers/media/platform/vsp1/vsp1_regs.h
+++ b/drivers/media/platform/vsp1/vsp1_regs.h
@@ -628,9 +628,17 @@
*/
#define VI6_HGT_OFFSET 0x3400
+#define VI6_HGT_OFFSET_HOFFSET_SHIFT 16
+#define VI6_HGT_OFFSET_VOFFSET_SHIFT 0
#define VI6_HGT_SIZE 0x3404
+#define VI6_HGT_SIZE_HSIZE_SHIFT 16
+#define VI6_HGT_SIZE_VSIZE_SHIFT 0
#define VI6_HGT_MODE 0x3408
+#define VI6_HGT_MODE_HRATIO_SHIFT 2
+#define VI6_HGT_MODE_VRATIO_SHIFT 0
#define VI6_HGT_HUE_AREA(n) (0x340c + (n) * 4)
+#define VI6_HGT_HUE_AREA_LOWER_SHIFT 16
+#define VI6_HGT_HUE_AREA_UPPER_SHIFT 0
#define VI6_HGT_LB_TH 0x3424
#define VI6_HGT_LBn_H(n) (0x3438 + (n) * 8)
#define VI6_HGT_LBn_V(n) (0x342c + (n) * 8)
@@ -639,6 +647,7 @@
#define VI6_HGT_SUM 0x3754
#define VI6_HGT_LB_DET 0x3758
#define VI6_HGT_REGRST 0x37fc
+#define VI6_HGT_REGRST_RCLEA (1 << 0)
/* -----------------------------------------------------------------------------
* LIF Control Registers
diff --git a/drivers/media/platform/vsp1/vsp1_video.c b/drivers/media/platform/vsp1/vsp1_video.c
index 7bc07d438367..eab3c3ea85d7 100644
--- a/drivers/media/platform/vsp1/vsp1_video.c
+++ b/drivers/media/platform/vsp1/vsp1_video.c
@@ -32,6 +32,7 @@
#include "vsp1_dl.h"
#include "vsp1_entity.h"
#include "vsp1_hgo.h"
+#include "vsp1_hgt.h"
#include "vsp1_pipe.h"
#include "vsp1_rwpf.h"
#include "vsp1_uds.h"
@@ -607,6 +608,11 @@ static int vsp1_video_pipeline_build(struct vsp1_pipeline *pipe,
pipe->hgo = e;
hgo->histo.pipe = pipe;
+ } else if (e->type == VSP1_ENTITY_HGT) {
+ struct vsp1_hgt *hgt = to_hgt(subdev);
+
+ pipe->hgt = e;
+ hgt->histo.pipe = pipe;
}
}
--
2.11.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCHv4 11/15] vidioc-queryctrl.rst: document V4L2_CTRL_FLAG_MODIFY_LAYOUT
2017-04-10 19:26 [PATCHv4 00/15] R-Car VSP1 Histogram Support Hans Verkuil
` (9 preceding siblings ...)
2017-04-10 19:26 ` [PATCHv4 10/15] v4l: vsp1: Add HGT support Hans Verkuil
@ 2017-04-10 19:26 ` Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 12/15] videodev.h: add V4L2_CTRL_FLAG_MODIFY_LAYOUT Hans Verkuil
` (5 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Hans Verkuil @ 2017-04-10 19:26 UTC (permalink / raw)
To: linux-media; +Cc: Laurent Pinchart, Sakari Ailus, Hans Verkuil
From: Hans Verkuil <hans.verkuil@cisco.com>
Document this new control flag.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
Documentation/media/uapi/v4l/vidioc-queryctrl.rst | 13 +++++++++++++
Documentation/media/videodev2.h.rst.exceptions | 1 +
2 files changed, 14 insertions(+)
diff --git a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
index 82769de801b1..1ffdc3f3c614 100644
--- a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
+++ b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
@@ -507,6 +507,19 @@ See also the examples in :ref:`control`.
represents an action on the hardware. For example: clearing an
error flag or triggering the flash. All the controls of the type
``V4L2_CTRL_TYPE_BUTTON`` have this flag set.
+ * .. _FLAG_MODIFY_LAYOUT:
+
+ - ``V4L2_CTRL_FLAG_MODIFY_LAYOUT``
+ - 0x0400
+ - Changing this control value may modify the layout of the
+ buffer (for video devices) or the media bus format (for sub-devices).
+
+ A typical example would be the ``V4L2_CID_ROTATE`` control.
+
+ Note that typically controls with this flag will also set the
+ ``V4L2_CTRL_FLAG_GRABBED`` flag when buffers are allocated or
+ streaming is in progress since most drivers do not support changing
+ the format in that case.
Return Value
diff --git a/Documentation/media/videodev2.h.rst.exceptions b/Documentation/media/videodev2.h.rst.exceptions
index c9c611b18ba1..a5cb0a8686ac 100644
--- a/Documentation/media/videodev2.h.rst.exceptions
+++ b/Documentation/media/videodev2.h.rst.exceptions
@@ -341,6 +341,7 @@ replace define V4L2_CTRL_FLAG_WRITE_ONLY control-flags
replace define V4L2_CTRL_FLAG_VOLATILE control-flags
replace define V4L2_CTRL_FLAG_HAS_PAYLOAD control-flags
replace define V4L2_CTRL_FLAG_EXECUTE_ON_WRITE control-flags
+replace define V4L2_CTRL_FLAG_MODIFY_LAYOUT control-flags
replace define V4L2_CTRL_FLAG_NEXT_CTRL control
replace define V4L2_CTRL_FLAG_NEXT_COMPOUND control
--
2.11.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCHv4 12/15] videodev.h: add V4L2_CTRL_FLAG_MODIFY_LAYOUT
2017-04-10 19:26 [PATCHv4 00/15] R-Car VSP1 Histogram Support Hans Verkuil
` (10 preceding siblings ...)
2017-04-10 19:26 ` [PATCHv4 11/15] vidioc-queryctrl.rst: document V4L2_CTRL_FLAG_MODIFY_LAYOUT Hans Verkuil
@ 2017-04-10 19:26 ` Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 13/15] v4l2-ctrls.c: set V4L2_CTRL_FLAG_MODIFY_LAYOUT for ROTATE Hans Verkuil
` (4 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Hans Verkuil @ 2017-04-10 19:26 UTC (permalink / raw)
To: linux-media; +Cc: Laurent Pinchart, Sakari Ailus, Hans Verkuil
From: Hans Verkuil <hans.verkuil@cisco.com>
Add new flag to indicate that changing this control will change the
buffer/mediabus layout as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
include/uapi/linux/videodev2.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 75f032448ae5..2b8feb86d09e 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -1659,6 +1659,7 @@ struct v4l2_querymenu {
#define V4L2_CTRL_FLAG_VOLATILE 0x0080
#define V4L2_CTRL_FLAG_HAS_PAYLOAD 0x0100
#define V4L2_CTRL_FLAG_EXECUTE_ON_WRITE 0x0200
+#define V4L2_CTRL_FLAG_MODIFY_LAYOUT 0x0400
/* Query flags, to be ORed with the control ID */
#define V4L2_CTRL_FLAG_NEXT_CTRL 0x80000000
--
2.11.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCHv4 13/15] v4l2-ctrls.c: set V4L2_CTRL_FLAG_MODIFY_LAYOUT for ROTATE
2017-04-10 19:26 [PATCHv4 00/15] R-Car VSP1 Histogram Support Hans Verkuil
` (11 preceding siblings ...)
2017-04-10 19:26 ` [PATCHv4 12/15] videodev.h: add V4L2_CTRL_FLAG_MODIFY_LAYOUT Hans Verkuil
@ 2017-04-10 19:26 ` Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 14/15] buffer.rst: clarify how V4L2_CTRL_FLAG_MODIFY_LAYOUT/GRABBER are used Hans Verkuil
` (3 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Hans Verkuil @ 2017-04-10 19:26 UTC (permalink / raw)
To: linux-media; +Cc: Laurent Pinchart, Sakari Ailus, Hans Verkuil
From: Hans Verkuil <hans.verkuil@cisco.com>
The rotate control will modify the layout by definition. Always
set this flag.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
drivers/media/v4l2-core/v4l2-ctrls.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index b4b364f68695..ec42872d11cf 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -997,6 +997,10 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
*min = 0;
*max = *step = 1;
break;
+ case V4L2_CID_ROTATE:
+ *type = V4L2_CTRL_TYPE_INTEGER;
+ *flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
+ break;
case V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE:
case V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE:
*type = V4L2_CTRL_TYPE_INTEGER;
--
2.11.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCHv4 14/15] buffer.rst: clarify how V4L2_CTRL_FLAG_MODIFY_LAYOUT/GRABBER are used
2017-04-10 19:26 [PATCHv4 00/15] R-Car VSP1 Histogram Support Hans Verkuil
` (12 preceding siblings ...)
2017-04-10 19:26 ` [PATCHv4 13/15] v4l2-ctrls.c: set V4L2_CTRL_FLAG_MODIFY_LAYOUT for ROTATE Hans Verkuil
@ 2017-04-10 19:26 ` Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 15/15] vsp1: set V4L2_CTRL_FLAG_MODIFY_LAYOUT for histogram controls Hans Verkuil
` (2 subsequent siblings)
16 siblings, 0 replies; 21+ messages in thread
From: Hans Verkuil @ 2017-04-10 19:26 UTC (permalink / raw)
To: linux-media; +Cc: Laurent Pinchart, Sakari Ailus, Hans Verkuil
From: Hans Verkuil <hans.verkuil@cisco.com>
Explain when the V4L2_CTRL_FLAG_MODIFY_LAYOUT and
V4L2_CTRL_FLAG_MODIFY_GRABBER flags should be used.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
Documentation/media/uapi/v4l/buffer.rst | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/Documentation/media/uapi/v4l/buffer.rst b/Documentation/media/uapi/v4l/buffer.rst
index 64613d935edd..ae6ee73f151c 100644
--- a/Documentation/media/uapi/v4l/buffer.rst
+++ b/Documentation/media/uapi/v4l/buffer.rst
@@ -48,10 +48,16 @@ The set of information needed to interpret the content of a buffer (e.g. the
pixel format, the line stride, the tiling orientation or the rotation) is
collectively referred to in the rest of this section as the buffer layout.
+Controls that can modify the buffer layout shall set the
+``V4L2_CTRL_FLAG_MODIFY_LAYOUT`` flag.
+
Modifying formats or controls that influence the buffer size or layout require
the stream to be stopped. Any attempt at such a modification while the stream
is active shall cause the ioctl setting the format or the control to return
-the ``EBUSY`` error code.
+the ``EBUSY`` error code. In that case drivers shall also set the
+``V4L2_CTRL_FLAG_GRABBED`` flag when calling
+:c:func:`VIDIOC_QUERYCTRL` or :c:func:`VIDIOC_QUERY_EXT_CTRL` for such a
+control while the stream is active.
.. note::
@@ -67,7 +73,8 @@ the ``EBUSY`` error code.
Controls that only influence the buffer layout can be modified at any time
when the stream is stopped. As they don't influence the buffer size, no
special handling is needed to synchronize those controls with buffer
-allocation.
+allocation and the ``V4L2_CTRL_FLAG_GRABBED`` flag is cleared once the
+stream is stopped.
Formats and controls that influence the buffer size interact with buffer
allocation. The simplest way to handle this is for drivers to always require
@@ -75,8 +82,10 @@ buffers to be reallocated in order to change those formats or controls. In
that case, to perform such changes, userspace applications shall first stop
the video stream with the :c:func:`VIDIOC_STREAMOFF` ioctl if it is running
and free all buffers with the :c:func:`VIDIOC_REQBUFS` ioctl if they are
-allocated. The format or controls can then be modified, and buffers shall then
-be reallocated and the stream restarted. A typical ioctl sequence is
+allocated. After freeing all buffers the ``V4L2_CTRL_FLAG_GRABBED`` flag
+for controls is cleared. The format or controls can then be modified, and
+buffers shall then be reallocated and the stream restarted. A typical ioctl
+sequence is
#. VIDIOC_STREAMOFF
#. VIDIOC_REQBUFS(0)
--
2.11.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCHv4 15/15] vsp1: set V4L2_CTRL_FLAG_MODIFY_LAYOUT for histogram controls
2017-04-10 19:26 [PATCHv4 00/15] R-Car VSP1 Histogram Support Hans Verkuil
` (13 preceding siblings ...)
2017-04-10 19:26 ` [PATCHv4 14/15] buffer.rst: clarify how V4L2_CTRL_FLAG_MODIFY_LAYOUT/GRABBER are used Hans Verkuil
@ 2017-04-10 19:26 ` Hans Verkuil
2017-04-11 11:39 ` [PATCHv4 00/15] R-Car VSP1 Histogram Support Mauro Carvalho Chehab
2017-04-11 12:19 ` Sakari Ailus
16 siblings, 0 replies; 21+ messages in thread
From: Hans Verkuil @ 2017-04-10 19:26 UTC (permalink / raw)
To: linux-media; +Cc: Laurent Pinchart, Sakari Ailus, Hans Verkuil
From: Hans Verkuil <hans.verkuil@cisco.com>
The two histogram controls will modify the layout of the
metadata, so this flag should be set.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
drivers/media/platform/vsp1/vsp1_hgo.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/media/platform/vsp1/vsp1_hgo.c b/drivers/media/platform/vsp1/vsp1_hgo.c
index a138c6b7fb05..50309c053b78 100644
--- a/drivers/media/platform/vsp1/vsp1_hgo.c
+++ b/drivers/media/platform/vsp1/vsp1_hgo.c
@@ -111,6 +111,7 @@ static const struct v4l2_ctrl_config hgo_max_rgb_control = {
.max = 1,
.def = 0,
.step = 1,
+ .flags = V4L2_CTRL_FLAG_MODIFY_LAYOUT,
};
static const s64 hgo_num_bins[] = {
@@ -125,6 +126,7 @@ static const struct v4l2_ctrl_config hgo_num_bins_control = {
.max = 1,
.def = 0,
.qmenu_int = hgo_num_bins,
+ .flags = V4L2_CTRL_FLAG_MODIFY_LAYOUT,
};
/* -----------------------------------------------------------------------------
--
2.11.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCHv4 04/15] v4l: vsp1: Add histogram support
2017-04-10 19:26 ` [PATCHv4 04/15] v4l: vsp1: Add histogram support Hans Verkuil
@ 2017-04-11 11:17 ` Mauro Carvalho Chehab
2017-04-11 13:27 ` Hans Verkuil
0 siblings, 1 reply; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2017-04-11 11:17 UTC (permalink / raw)
To: Hans Verkuil
Cc: linux-media, Laurent Pinchart, Sakari Ailus, Laurent Pinchart
Em Mon, 10 Apr 2017 21:26:40 +0200
Hans Verkuil <hverkuil@xs4all.nl> escreveu:
> From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
>
> The histogram common code will be used to implement support for both the
> HGO and HGT histogram computation engines.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> ---
> drivers/media/platform/Kconfig | 1 +
> drivers/media/platform/vsp1/Makefile | 1 +
> drivers/media/platform/vsp1/vsp1_histo.c | 646 +++++++++++++++++++++++++++++++
> drivers/media/platform/vsp1/vsp1_histo.h | 84 ++++
> 4 files changed, 732 insertions(+)
> create mode 100644 drivers/media/platform/vsp1/vsp1_histo.c
> create mode 100644 drivers/media/platform/vsp1/vsp1_histo.h
> diff --git a/drivers/media/platform/vsp1/vsp1_histo.c b/drivers/media/platform/vsp1/vsp1_histo.c
> new file mode 100644
> index 000000000000..afab77cf4fa5
> --- /dev/null
> +++ b/drivers/media/platform/vsp1/vsp1_histo.c
...
> + crop = vsp1_entity_get_pad_selection(&histo->entity, config, sel->pad,
> + V4L2_SEL_TGT_CROP);
> +
> + /*
> + * Clamp the width and height to acceptable values first and then
> + * compute the closest rounded dividing ratio.
> + *
> + * Ratio Rounded ratio
> + * --------------------------
> + * [1.0 1.5[ 1
Nitpick:
1.0 1.5] 1
Thanks,
Mauro
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCHv4 00/15] R-Car VSP1 Histogram Support
2017-04-10 19:26 [PATCHv4 00/15] R-Car VSP1 Histogram Support Hans Verkuil
` (14 preceding siblings ...)
2017-04-10 19:26 ` [PATCHv4 15/15] vsp1: set V4L2_CTRL_FLAG_MODIFY_LAYOUT for histogram controls Hans Verkuil
@ 2017-04-11 11:39 ` Mauro Carvalho Chehab
2017-04-11 12:19 ` Sakari Ailus
16 siblings, 0 replies; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2017-04-11 11:39 UTC (permalink / raw)
To: Hans Verkuil; +Cc: linux-media, Laurent Pinchart, Sakari Ailus
Hi Hans,
Em Mon, 10 Apr 2017 21:26:36 +0200
Hans Verkuil <hverkuil@xs4all.nl> escreveu:
> From: Hans Verkuil <hans.verkuil@cisco.com>
>
> This patch series is the rebased version of this pull request:
>
> https://www.mail-archive.com/linux-media@vger.kernel.org/msg111025.html
>
> It slightly modifies 'Add metadata buffer type and format' (remove
> experimental note and add newline after label) and it adds support
> for V4L2_CTRL_FLAG_MODIFY_LAYOUT, as requested by Mauro.
>
> No other changes were made.
Patch series look ok. I found just one typo on one of the patches.
What seems to be missing here is to set the GRABBED flag for controls
that modify layout but don't allow control update while streaming.
While it is OK to do such change for the existing drivers later
(as this is actually a bug fix), I would be expecting such change
for the controls used at the vsp1 driver, as, from what I'm seeing
at the code, vsp1_wpf_s_ctrl() will block changing any controls in
runtime. So, wpf_init_controls() should mark all such controls with
V4L2_CTRL_FLAG_GRABBED[1].
Could you please add such patch at the end of this patchset?
Thanks!
Mauro
[1] I don't see any reason why not allowing HFLIP/VFLIP controls
to be handled in realtime (except if the hardware itself doesn't
allow), but the current code doesn't allow such changes in
realtime anymore. Perhaps the code could be less pick in the
future.
Thanks,
Mauro
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCHv4 00/15] R-Car VSP1 Histogram Support
2017-04-10 19:26 [PATCHv4 00/15] R-Car VSP1 Histogram Support Hans Verkuil
` (15 preceding siblings ...)
2017-04-11 11:39 ` [PATCHv4 00/15] R-Car VSP1 Histogram Support Mauro Carvalho Chehab
@ 2017-04-11 12:19 ` Sakari Ailus
16 siblings, 0 replies; 21+ messages in thread
From: Sakari Ailus @ 2017-04-11 12:19 UTC (permalink / raw)
To: Hans Verkuil, linux-media; +Cc: Laurent Pinchart
On 04/10/17 22:26, Hans Verkuil wrote:
> From: Hans Verkuil <hans.verkuil@cisco.com>
>
> This patch series is the rebased version of this pull request:
>
> https://www.mail-archive.com/linux-media@vger.kernel.org/msg111025.html
>
> It slightly modifies 'Add metadata buffer type and format' (remove
> experimental note and add newline after label) and it adds support
> for V4L2_CTRL_FLAG_MODIFY_LAYOUT, as requested by Mauro.
>
> No other changes were made.
For patches 11--15:
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
--
Sakari Ailus
sakari.ailus@linux.intel.com
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCHv4 04/15] v4l: vsp1: Add histogram support
2017-04-11 11:17 ` Mauro Carvalho Chehab
@ 2017-04-11 13:27 ` Hans Verkuil
2017-04-11 13:34 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 21+ messages in thread
From: Hans Verkuil @ 2017-04-11 13:27 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: linux-media, Laurent Pinchart, Sakari Ailus, Laurent Pinchart
On 04/11/17 13:17, Mauro Carvalho Chehab wrote:
> Em Mon, 10 Apr 2017 21:26:40 +0200
> Hans Verkuil <hverkuil@xs4all.nl> escreveu:
>
>> From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
>>
>> The histogram common code will be used to implement support for both the
>> HGO and HGT histogram computation engines.
>>
>> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
>> ---
>> drivers/media/platform/Kconfig | 1 +
>> drivers/media/platform/vsp1/Makefile | 1 +
>> drivers/media/platform/vsp1/vsp1_histo.c | 646 +++++++++++++++++++++++++++++++
>> drivers/media/platform/vsp1/vsp1_histo.h | 84 ++++
>> 4 files changed, 732 insertions(+)
>> create mode 100644 drivers/media/platform/vsp1/vsp1_histo.c
>> create mode 100644 drivers/media/platform/vsp1/vsp1_histo.h
>
>> diff --git a/drivers/media/platform/vsp1/vsp1_histo.c b/drivers/media/platform/vsp1/vsp1_histo.c
>> new file mode 100644
>> index 000000000000..afab77cf4fa5
>> --- /dev/null
>> +++ b/drivers/media/platform/vsp1/vsp1_histo.c
>
> ...
>
>> + crop = vsp1_entity_get_pad_selection(&histo->entity, config, sel->pad,
>> + V4L2_SEL_TGT_CROP);
>> +
>> + /*
>> + * Clamp the width and height to acceptable values first and then
>> + * compute the closest rounded dividing ratio.
>> + *
>> + * Ratio Rounded ratio
>> + * --------------------------
>> + * [1.0 1.5[ 1
>
> Nitpick:
>
> 1.0 1.5] 1
No, the notation [a b[ means the range 'a to, but not including, b'.
So this is correct.
I'm used to writing this as [a b), but according to wikipedia both notations
are allowed.
Regards,
Hans
>
> Thanks,
> Mauro
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCHv4 04/15] v4l: vsp1: Add histogram support
2017-04-11 13:27 ` Hans Verkuil
@ 2017-04-11 13:34 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 21+ messages in thread
From: Mauro Carvalho Chehab @ 2017-04-11 13:34 UTC (permalink / raw)
To: Hans Verkuil
Cc: linux-media, Laurent Pinchart, Sakari Ailus, Laurent Pinchart
Em Tue, 11 Apr 2017 15:27:12 +0200
Hans Verkuil <hverkuil@xs4all.nl> escreveu:
> On 04/11/17 13:17, Mauro Carvalho Chehab wrote:
> > Em Mon, 10 Apr 2017 21:26:40 +0200
> > Hans Verkuil <hverkuil@xs4all.nl> escreveu:
> >
> >> From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> >>
> >> The histogram common code will be used to implement support for both the
> >> HGO and HGT histogram computation engines.
> >>
> >> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> >> ---
> >> drivers/media/platform/Kconfig | 1 +
> >> drivers/media/platform/vsp1/Makefile | 1 +
> >> drivers/media/platform/vsp1/vsp1_histo.c | 646 +++++++++++++++++++++++++++++++
> >> drivers/media/platform/vsp1/vsp1_histo.h | 84 ++++
> >> 4 files changed, 732 insertions(+)
> >> create mode 100644 drivers/media/platform/vsp1/vsp1_histo.c
> >> create mode 100644 drivers/media/platform/vsp1/vsp1_histo.h
> >
> >> diff --git a/drivers/media/platform/vsp1/vsp1_histo.c b/drivers/media/platform/vsp1/vsp1_histo.c
> >> new file mode 100644
> >> index 000000000000..afab77cf4fa5
> >> --- /dev/null
> >> +++ b/drivers/media/platform/vsp1/vsp1_histo.c
> >
> > ...
> >
> >> + crop = vsp1_entity_get_pad_selection(&histo->entity, config, sel->pad,
> >> + V4L2_SEL_TGT_CROP);
> >> +
> >> + /*
> >> + * Clamp the width and height to acceptable values first and then
> >> + * compute the closest rounded dividing ratio.
> >> + *
> >> + * Ratio Rounded ratio
> >> + * --------------------------
> >> + * [1.0 1.5[ 1
> >
> > Nitpick:
> >
> > 1.0 1.5] 1
>
> No, the notation [a b[ means the range 'a to, but not including, b'.
>
> So this is correct.
>
> I'm used to writing this as [a b), but according to wikipedia both notations
> are allowed.
Ah! Yeah, it occurred to me that it could be using such notation from
set theory, but as all the other ranges there were using [a b], I
assumed it was a typo.
>
> Regards,
>
> Hans
>
> >
> > Thanks,
> > Mauro
> >
>
Thanks,
Mauro
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2017-04-11 13:34 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-04-10 19:26 [PATCHv4 00/15] R-Car VSP1 Histogram Support Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 01/15] v4l: Clearly document interactions between formats, controls and buffers Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 02/15] v4l: vsp1: wpf: Implement rotation support Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 03/15] v4l: Add metadata buffer type and format Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 04/15] v4l: vsp1: Add histogram support Hans Verkuil
2017-04-11 11:17 ` Mauro Carvalho Chehab
2017-04-11 13:27 ` Hans Verkuil
2017-04-11 13:34 ` Mauro Carvalho Chehab
2017-04-10 19:26 ` [PATCHv4 05/15] v4l: vsp1: Support histogram generators in pipeline configuration Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 06/15] v4l: vsp1: Fix HGO and HGT routing register addresses Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 07/15] v4l: Define a pixel format for the R-Car VSP1 1-D histogram engine Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 08/15] v4l: vsp1: Add HGO support Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 09/15] v4l: Define a pixel format for the R-Car VSP1 2-D histogram engine Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 10/15] v4l: vsp1: Add HGT support Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 11/15] vidioc-queryctrl.rst: document V4L2_CTRL_FLAG_MODIFY_LAYOUT Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 12/15] videodev.h: add V4L2_CTRL_FLAG_MODIFY_LAYOUT Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 13/15] v4l2-ctrls.c: set V4L2_CTRL_FLAG_MODIFY_LAYOUT for ROTATE Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 14/15] buffer.rst: clarify how V4L2_CTRL_FLAG_MODIFY_LAYOUT/GRABBER are used Hans Verkuil
2017-04-10 19:26 ` [PATCHv4 15/15] vsp1: set V4L2_CTRL_FLAG_MODIFY_LAYOUT for histogram controls Hans Verkuil
2017-04-11 11:39 ` [PATCHv4 00/15] R-Car VSP1 Histogram Support Mauro Carvalho Chehab
2017-04-11 12:19 ` Sakari Ailus
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.