[PATCH 2/3] nvme: wwid_show: strip trailing 0-bytes

[mwilck@suse.com (Martin Wilck)]

Some broken targets (such as the current Linux target) pad
model or serial fields with 0-bytes rather than spaces. The
NVME spec disallows 0 bytes in "ASCII" fields.
Thus strip trailing 0-bytes, too.

Signed-off-by: Martin Wilck <mwilck at suse.com>
Reviewed-by: Hannes Reinecke <hare at suse.de>
---
 drivers/nvme/host/core.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index d70df1d0072d4..deced6b91442d 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2001,9 +2001,11 @@ static ssize_t wwid_show(struct device *dev, struct device_attribute *attr,
 	if (memchr_inv(ns->eui, 0, sizeof(ns->eui)))
 		return sprintf(buf, "eui.%8phN\n", ns->eui);
 
-	while (ctrl->serial[serial_len - 1] == ' ')
+	while (ctrl->serial[serial_len - 1] == ' ' ||
+	       ctrl->serial[serial_len - 1] == '\0')
 		serial_len--;
-	while (ctrl->model[model_len - 1] == ' ')
+	while (ctrl->model[model_len - 1] == ' ' ||
+	       ctrl->model[model_len - 1] == '\0')
 		model_len--;
 
 	return sprintf(buf, "nvme.%04x-%*phN-%*phN-%08x\n", ctrl->vid,
-- 
2.13.2