[Qemu-devel] [PATCH 0/3 v4] xenfb: Enablement for Windows PV HID frontend

[Qemu-devel] [PATCH 0/3 v4] xenfb: Enablement for Windows PV HID frontend

[Owen Smith]

Improve the input device model in xenfb, by updating the
Qemu input handlers and adding a feature to allow for
raw (unscaled) absolute coordinates to be represented.

By using a reverse mapping call, the Linux input.h #defines
are not pulled into xenfb, and so should remove the compiler
warnings reported.

Owen Smith (3):
  ui/input: add qemu_input_qcode_to_linux
  xenfb: Use Input Handlers directly
  xenfb: Add [feature|request]-raw-pointer

 hw/display/xenfb.c | 300 +++++++++++++++++++++++++----------------------------
 include/ui/input.h |   1 +
 ui/input-keymap.c  |  16 +++
 3 files changed, 161 insertions(+), 156 deletions(-)

-- 
2.1.4

[PATCH 0/3 v4] xenfb: Enablement for Windows PV HID frontend

[Owen Smith]

Improve the input device model in xenfb, by updating the
Qemu input handlers and adding a feature to allow for
raw (unscaled) absolute coordinates to be represented.

By using a reverse mapping call, the Linux input.h #defines
are not pulled into xenfb, and so should remove the compiler
warnings reported.

Owen Smith (3):
  ui/input: add qemu_input_qcode_to_linux
  xenfb: Use Input Handlers directly
  xenfb: Add [feature|request]-raw-pointer

 hw/display/xenfb.c | 300 +++++++++++++++++++++++++----------------------------
 include/ui/input.h |   1 +
 ui/input-keymap.c  |  16 +++
 3 files changed, 161 insertions(+), 156 deletions(-)

-- 
2.1.4


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[Qemu-devel] [PATCH 1/3 v4] ui/input: add qemu_input_qcode_to_linux

[Owen Smith]

Build a reverse mapping on first call that converts qcodes to
linux KEY_* identifiers.

Signed-off-by: Owen Smith <owen.smith@citrix.com>
---
 include/ui/input.h |  1 +
 ui/input-keymap.c  | 16 ++++++++++++++++
 2 files changed, 17 insertions(+)

diff --git a/include/ui/input.h b/include/ui/input.h
index c488585..c3c1664 100644
--- a/include/ui/input.h
+++ b/include/ui/input.h
@@ -49,6 +49,7 @@ int qemu_input_key_value_to_qcode(const KeyValue *value);
 int qemu_input_key_value_to_scancode(const KeyValue *value, bool down,
                                      int *codes);
 int qemu_input_linux_to_qcode(unsigned int lnx);
+unsigned int qemu_input_qcode_to_linux(int qcode);
 
 InputEvent *qemu_input_event_new_btn(InputButton btn, bool down);
 void qemu_input_queue_btn(QemuConsole *src, InputButton btn, bool down);
diff --git a/ui/input-keymap.c b/ui/input-keymap.c
index cf979c2..5f020fc 100644
--- a/ui/input-keymap.c
+++ b/ui/input-keymap.c
@@ -300,6 +300,7 @@ static const int qcode_to_number[] = {
 };
 
 static int number_to_qcode[0x100];
+static unsigned int qcode_to_linux[Q_KEY_CODE__MAX];
 
 int qemu_input_linux_to_qcode(unsigned int lnx)
 {
@@ -307,6 +308,21 @@ int qemu_input_linux_to_qcode(unsigned int lnx)
     return linux_to_qcode[lnx];
 }
 
+unsigned int qemu_input_qcode_to_linux(int qcode)
+{
+    static int first = true;
+
+    if (first) {
+        unsigned int lnx;
+        first = false;
+        for (lnx = 0; lnx < KEY_CNT; ++lnx) {
+            qcode_to_linux[linux_to_qcode[lnx]] = lnx;
+        }
+    }
+
+    return qcode_to_linux[qcode];
+}
+
 int qemu_input_key_value_to_number(const KeyValue *value)
 {
     if (value->type == KEY_VALUE_KIND_QCODE) {
-- 
2.1.4

[PATCH 1/3 v4] ui/input: add qemu_input_qcode_to_linux

[Owen Smith]

Build a reverse mapping on first call that converts qcodes to
linux KEY_* identifiers.

Signed-off-by: Owen Smith <owen.smith@citrix.com>
---
 include/ui/input.h |  1 +
 ui/input-keymap.c  | 16 ++++++++++++++++
 2 files changed, 17 insertions(+)

diff --git a/include/ui/input.h b/include/ui/input.h
index c488585..c3c1664 100644
--- a/include/ui/input.h
+++ b/include/ui/input.h
@@ -49,6 +49,7 @@ int qemu_input_key_value_to_qcode(const KeyValue *value);
 int qemu_input_key_value_to_scancode(const KeyValue *value, bool down,
                                      int *codes);
 int qemu_input_linux_to_qcode(unsigned int lnx);
+unsigned int qemu_input_qcode_to_linux(int qcode);
 
 InputEvent *qemu_input_event_new_btn(InputButton btn, bool down);
 void qemu_input_queue_btn(QemuConsole *src, InputButton btn, bool down);
diff --git a/ui/input-keymap.c b/ui/input-keymap.c
index cf979c2..5f020fc 100644
--- a/ui/input-keymap.c
+++ b/ui/input-keymap.c
@@ -300,6 +300,7 @@ static const int qcode_to_number[] = {
 };
 
 static int number_to_qcode[0x100];
+static unsigned int qcode_to_linux[Q_KEY_CODE__MAX];
 
 int qemu_input_linux_to_qcode(unsigned int lnx)
 {
@@ -307,6 +308,21 @@ int qemu_input_linux_to_qcode(unsigned int lnx)
     return linux_to_qcode[lnx];
 }
 
+unsigned int qemu_input_qcode_to_linux(int qcode)
+{
+    static int first = true;
+
+    if (first) {
+        unsigned int lnx;
+        first = false;
+        for (lnx = 0; lnx < KEY_CNT; ++lnx) {
+            qcode_to_linux[linux_to_qcode[lnx]] = lnx;
+        }
+    }
+
+    return qcode_to_linux[qcode];
+}
+
 int qemu_input_key_value_to_number(const KeyValue *value)
 {
     if (value->type == KEY_VALUE_KIND_QCODE) {
-- 
2.1.4


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[Qemu-devel] [PATCH 2/3 v4] xenfb: Use Input Handlers directly

[Owen Smith]

Avoid the unneccessary calls through the input-legacy.c file by
using the qemu_input_handler_*() calls directly. This did require
reworking the event and sync handlers to use the reverse mapping
from qcode to linux using qemu_input_qcode_to_linux().
Removes the scancode2linux mapping, and supporting documention.

Signed-off-by: Owen Smith <owen.smith@citrix.com>
---
 hw/display/xenfb.c | 289 ++++++++++++++++++++++++-----------------------------
 1 file changed, 133 insertions(+), 156 deletions(-)

diff --git a/hw/display/xenfb.c b/hw/display/xenfb.c
index df8b78f..33361b4 100644
--- a/hw/display/xenfb.c
+++ b/hw/display/xenfb.c
@@ -27,6 +27,7 @@
 #include "qemu/osdep.h"
 
 #include "hw/hw.h"
+#include "ui/input.h"
 #include "ui/console.h"
 #include "hw/xen/xen_backend.h"
 
@@ -51,9 +52,10 @@ struct common {
 struct XenInput {
     struct common c;
     int abs_pointer_wanted; /* Whether guest supports absolute pointer */
-    int button_state;       /* Last seen pointer button state */
-    int extended;
-    QEMUPutMouseEntry *qmouse;
+    QemuInputHandlerState *qkbd;
+    QemuInputHandlerState *qmou;
+    int mouse_axes[INPUT_AXIS__MAX];
+    int mouse_wheel;
 };
 
 #define UP_QUEUE 8
@@ -119,79 +121,6 @@ static void common_unbind(struct common *c)
 }
 
 /* -------------------------------------------------------------------- */
-
-#if 0
-/*
- * These two tables are not needed any more, but left in here
- * intentionally as documentation, to show how scancode2linux[]
- * was generated.
- *
- * Tables to map from scancode to Linux input layer keycode.
- * Scancodes are hardware-specific.  These maps assumes a
- * standard AT or PS/2 keyboard which is what QEMU feeds us.
- */
-const unsigned char atkbd_set2_keycode[512] = {
-
-     0, 67, 65, 63, 61, 59, 60, 88,  0, 68, 66, 64, 62, 15, 41,117,
-     0, 56, 42, 93, 29, 16,  2,  0,  0,  0, 44, 31, 30, 17,  3,  0,
-     0, 46, 45, 32, 18,  5,  4, 95,  0, 57, 47, 33, 20, 19,  6,183,
-     0, 49, 48, 35, 34, 21,  7,184,  0,  0, 50, 36, 22,  8,  9,185,
-     0, 51, 37, 23, 24, 11, 10,  0,  0, 52, 53, 38, 39, 25, 12,  0,
-     0, 89, 40,  0, 26, 13,  0,  0, 58, 54, 28, 27,  0, 43,  0, 85,
-     0, 86, 91, 90, 92,  0, 14, 94,  0, 79,124, 75, 71,121,  0,  0,
-    82, 83, 80, 76, 77, 72,  1, 69, 87, 78, 81, 74, 55, 73, 70, 99,
-
-      0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
-    217,100,255,  0, 97,165,  0,  0,156,  0,  0,  0,  0,  0,  0,125,
-    173,114,  0,113,  0,  0,  0,126,128,  0,  0,140,  0,  0,  0,127,
-    159,  0,115,  0,164,  0,  0,116,158,  0,150,166,  0,  0,  0,142,
-    157,  0,  0,  0,  0,  0,  0,  0,155,  0, 98,  0,  0,163,  0,  0,
-    226,  0,  0,  0,  0,  0,  0,  0,  0,255, 96,  0,  0,  0,143,  0,
-      0,  0,  0,  0,  0,  0,  0,  0,  0,107,  0,105,102,  0,  0,112,
-    110,111,108,112,106,103,  0,119,  0,118,109,  0, 99,104,119,  0,
-
-};
-
-const unsigned char atkbd_unxlate_table[128] = {
-
-      0,118, 22, 30, 38, 37, 46, 54, 61, 62, 70, 69, 78, 85,102, 13,
-     21, 29, 36, 45, 44, 53, 60, 67, 68, 77, 84, 91, 90, 20, 28, 27,
-     35, 43, 52, 51, 59, 66, 75, 76, 82, 14, 18, 93, 26, 34, 33, 42,
-     50, 49, 58, 65, 73, 74, 89,124, 17, 41, 88,  5,  6,  4, 12,  3,
-     11,  2, 10,  1,  9,119,126,108,117,125,123,107,115,116,121,105,
-    114,122,112,113,127, 96, 97,120,  7, 15, 23, 31, 39, 47, 55, 63,
-     71, 79, 86, 94,  8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 87,111,
-     19, 25, 57, 81, 83, 92, 95, 98, 99,100,101,103,104,106,109,110
-
-};
-#endif
-
-/*
- * for (i = 0; i < 128; i++) {
- *     scancode2linux[i] = atkbd_set2_keycode[atkbd_unxlate_table[i]];
- *     scancode2linux[i | 0x80] = atkbd_set2_keycode[atkbd_unxlate_table[i] | 0x80];
- * }
- */
-static const unsigned char scancode2linux[512] = {
-      0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15,
-     16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-     32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
-     48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
-     64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79,
-     80, 81, 82, 83, 99,  0, 86, 87, 88,117,  0,  0, 95,183,184,185,
-      0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
-     93,  0,  0, 89,  0,  0, 85, 91, 90, 92,  0, 94,  0,124,121,  0,
-
-      0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
-    165,  0,  0,  0,  0,  0,  0,  0,  0,163,  0,  0, 96, 97,  0,  0,
-    113,140,164,  0,166,  0,  0,  0,  0,  0,255,  0,  0,  0,114,  0,
-    115,  0,150,  0,  0, 98,255, 99,100,  0,  0,  0,  0,  0,  0,  0,
-      0,  0,  0,  0,  0,119,119,102,103,104,  0,105,112,106,118,107,
-    108,109,110,111,  0,  0,  0,  0,  0,  0,  0,125,126,127,116,142,
-      0,  0,  0,143,  0,217,156,173,128,159,158,157,155,226,  0,112,
-      0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
-};
-
 /* Send an event to the keyboard frontend driver */
 static int xenfb_kbd_event(struct XenInput *xenfb,
 			   union xenkbd_in_event *event)
@@ -260,87 +189,126 @@ static int xenfb_send_position(struct XenInput *xenfb,
     return xenfb_kbd_event(xenfb, &event);
 }
 
-/*
- * Send a key event from the client to the guest OS
- * QEMU gives us a raw scancode from an AT / PS/2 style keyboard.
- * We have to turn this into a Linux Input layer keycode.
- *
- * Extra complexity from the fact that with extended scancodes
- * (like those produced by arrow keys) this method gets called
- * twice, but we only want to send a single event. So we have to
- * track the '0xe0' scancode state & collapse the extended keys
- * as needed.
- *
- * Wish we could just send scancodes straight to the guest which
- * already has code for dealing with this...
- */
-static void xenfb_key_event(void *opaque, int scancode)
+static void xenfb_key_event(DeviceState *dev, QemuConsole *src,
+                            InputEvent *evt)
 {
-    struct XenInput *xenfb = opaque;
-    int down = 1;
-
-    if (scancode == 0xe0) {
-	xenfb->extended = 1;
-	return;
-    } else if (scancode & 0x80) {
-	scancode &= 0x7f;
-	down = 0;
+    struct XenInput *in = (struct XenInput *)dev;
+    InputKeyEvent *key = evt->u.key.data;
+    int qcode = qemu_input_key_value_to_qcode(key->key);
+
+    if (qcode) {
+        unsigned int lnx = qemu_input_qcode_to_linux(qcode);
+        if (lnx) {
+            xenfb_send_key(in, key->down, lnx);
+        }
     }
-    if (xenfb->extended) {
-	scancode |= 0x80;
-	xenfb->extended = 0;
+}
+
+static void xenfb_mouse_event(DeviceState *dev, QemuConsole *src,
+                              InputEvent *evt)
+{
+    struct XenInput *in = (struct XenInput *)dev;
+    InputBtnEvent *btn;
+    InputMoveEvent *move;
+
+    switch (evt->type) {
+    case INPUT_EVENT_KIND_BTN:
+        btn = evt->u.btn.data;
+        switch (btn->button) {
+        case INPUT_BUTTON_LEFT:
+            xenfb_send_key(in, btn->down, BTN_LEFT);
+            break;
+        case INPUT_BUTTON_RIGHT:
+            xenfb_send_key(in, btn->down, BTN_LEFT + 1);
+            break;
+        case INPUT_BUTTON_MIDDLE:
+            xenfb_send_key(in, btn->down, BTN_LEFT + 2);
+            break;
+        case INPUT_BUTTON_WHEEL_UP:
+            if (btn->down) {
+                in->mouse_wheel--;
+            }
+            break;
+        case INPUT_BUTTON_WHEEL_DOWN:
+            if (btn->down) {
+                in->mouse_wheel++;
+            }
+            break;
+        default:
+            break;
+        }
+        break;
+    case INPUT_EVENT_KIND_ABS:
+        move = evt->u.abs.data;
+        in->mouse_axes[move->axis] = move->value;
+        break;
+    case INPUT_EVENT_KIND_REL:
+        move = evt->u.rel.data;
+        in->mouse_axes[move->axis] += move->value;
+        break;
+    default:
+        break;
     }
-    xenfb_send_key(xenfb, down, scancode2linux[scancode]);
 }
 
-/*
- * Send a mouse event from the client to the guest OS
- *
- * The QEMU mouse can be in either relative, or absolute mode.
- * Movement is sent separately from button state, which has to
- * be encoded as virtual key events. We also don't actually get
- * given any button up/down events, so have to track changes in
- * the button state.
- */
-static void xenfb_mouse_event(void *opaque,
-			      int dx, int dy, int dz, int button_state)
+static void xenfb_mouse_sync(DeviceState *dev)
 {
-    struct XenInput *xenfb = opaque;
-    QemuConsole *con = qemu_console_lookup_by_index(0);
-    DisplaySurface *surface;
-    int dw, dh, i;
+    struct XenInput *in = (struct XenInput *)dev;
+    int dx, dy, dz;
 
-    if (!con) {
-        xen_pv_printf(&xenfb->c.xendev, 0, "No QEMU console available");
-        return;
-    }
+    dx = in->mouse_axes[INPUT_AXIS_X];
+    dy = in->mouse_axes[INPUT_AXIS_Y];
+    dz = in->mouse_wheel;
+
+    trace_xenfb_mouse_event(in, dx, dy, dz, 0,
+                            in->abs_pointer_wanted);
+
+    if (in->abs_pointer_wanted) {
+        QemuConsole *con = qemu_console_lookup_by_index(0);
+        DisplaySurface *surface;
+        int dw, dh;
+
+        if (!con) {
+            xen_pv_printf(&in->c.xendev, 0, "No QEMU console available");
+            return;
+        }
+
+        surface = qemu_console_surface(con);
+        dw = surface_width(surface);
+        dh = surface_height(surface);
+
+        dx = dx * (dw - 1) / 0x7fff;
+        dy = dy * (dh - 1) / 0x7fff;
 
-    surface = qemu_console_surface(con);
-    dw = surface_width(surface);
-    dh = surface_height(surface);
-
-    trace_xenfb_mouse_event(opaque, dx, dy, dz, button_state,
-                            xenfb->abs_pointer_wanted);
-    if (xenfb->abs_pointer_wanted)
-	xenfb_send_position(xenfb,
-			    dx * (dw - 1) / 0x7fff,
-			    dy * (dh - 1) / 0x7fff,
-			    dz);
-    else
-	xenfb_send_motion(xenfb, dx, dy, dz);
-
-    for (i = 0 ; i < 8 ; i++) {
-	int lastDown = xenfb->button_state & (1 << i);
-	int down = button_state & (1 << i);
-	if (down == lastDown)
-	    continue;
-
-	if (xenfb_send_key(xenfb, down, BTN_LEFT+i) < 0)
-	    return;
+        xenfb_send_position(in, dx, dy, dz);
+    } else {
+        xenfb_send_motion(in, dx, dy, dz);
+
+        in->mouse_axes[INPUT_AXIS_X] = 0;
+        in->mouse_axes[INPUT_AXIS_Y] = 0;
     }
-    xenfb->button_state = button_state;
+
+    in->mouse_wheel = 0;
 }
 
+static QemuInputHandler xenfb_keyboard = {
+    .name  = "Xen PVFB Keyboard",
+    .mask  = INPUT_EVENT_MASK_KEY,
+    .event = xenfb_key_event,
+};
+static QemuInputHandler xenfb_abs_mouse = {
+    .name  = "Xen PVFB Absolute Mouse",
+    .mask  = INPUT_EVENT_MASK_BTN | INPUT_EVENT_MASK_ABS,
+    .event = xenfb_mouse_event,
+    .sync  = xenfb_mouse_sync
+};
+static QemuInputHandler xenfb_rel_mouse = {
+    .name  = "Xen PVFB Mouse",
+    .mask  = INPUT_EVENT_MASK_BTN | INPUT_EVENT_MASK_REL,
+    .event = xenfb_mouse_event,
+    .sync  = xenfb_mouse_sync,
+};
+
 static int input_init(struct XenDevice *xendev)
 {
     xenstore_write_be_int(xendev, "feature-abs-pointer", 1);
@@ -356,7 +324,6 @@ static int input_initialise(struct XenDevice *xendev)
     if (rc != 0)
 	return rc;
 
-    qemu_add_kbd_event_handler(xenfb_key_event, in);
     return 0;
 }
 
@@ -369,24 +336,34 @@ static void input_connected(struct XenDevice *xendev)
         in->abs_pointer_wanted = 0;
     }
 
-    if (in->qmouse) {
-        qemu_remove_mouse_event_handler(in->qmouse);
+    if (in->qkbd) {
+        qemu_input_handler_unregister(in->qkbd);
+    }
+    if (in->qmou) {
+        qemu_input_handler_unregister(in->qmou);
     }
     trace_xenfb_input_connected(xendev, in->abs_pointer_wanted);
-    in->qmouse = qemu_add_mouse_event_handler(xenfb_mouse_event, in,
-					      in->abs_pointer_wanted,
-					      "Xen PVFB Mouse");
+
+    in->qkbd = qemu_input_handler_register((DeviceState *)in, &xenfb_keyboard);
+    in->qmou = qemu_input_handler_register((DeviceState *)in,
+        (in->abs_pointer_wanted ? &xenfb_abs_mouse : &xenfb_rel_mouse));
+
+    qemu_input_handler_activate(in->qkbd);
+    qemu_input_handler_activate(in->qmou);
 }
 
 static void input_disconnect(struct XenDevice *xendev)
 {
     struct XenInput *in = container_of(xendev, struct XenInput, c.xendev);
 
-    if (in->qmouse) {
-	qemu_remove_mouse_event_handler(in->qmouse);
-	in->qmouse = NULL;
+    if (in->qkbd) {
+        qemu_input_handler_unregister(in->qkbd);
+        in->qkbd = NULL;
+    }
+    if (in->qmou) {
+        qemu_input_handler_unregister(in->qmou);
+        in->qmou = NULL;
     }
-    qemu_add_kbd_event_handler(NULL, NULL);
     common_unbind(&in->c);
 }
 
-- 
2.1.4

[PATCH 2/3 v4] xenfb: Use Input Handlers directly

[Owen Smith]

Avoid the unneccessary calls through the input-legacy.c file by
using the qemu_input_handler_*() calls directly. This did require
reworking the event and sync handlers to use the reverse mapping
from qcode to linux using qemu_input_qcode_to_linux().
Removes the scancode2linux mapping, and supporting documention.

Signed-off-by: Owen Smith <owen.smith@citrix.com>
---
 hw/display/xenfb.c | 289 ++++++++++++++++++++++++-----------------------------
 1 file changed, 133 insertions(+), 156 deletions(-)

diff --git a/hw/display/xenfb.c b/hw/display/xenfb.c
index df8b78f..33361b4 100644
--- a/hw/display/xenfb.c
+++ b/hw/display/xenfb.c
@@ -27,6 +27,7 @@
 #include "qemu/osdep.h"
 
 #include "hw/hw.h"
+#include "ui/input.h"
 #include "ui/console.h"
 #include "hw/xen/xen_backend.h"
 
@@ -51,9 +52,10 @@ struct common {
 struct XenInput {
     struct common c;
     int abs_pointer_wanted; /* Whether guest supports absolute pointer */
-    int button_state;       /* Last seen pointer button state */
-    int extended;
-    QEMUPutMouseEntry *qmouse;
+    QemuInputHandlerState *qkbd;
+    QemuInputHandlerState *qmou;
+    int mouse_axes[INPUT_AXIS__MAX];
+    int mouse_wheel;
 };
 
 #define UP_QUEUE 8
@@ -119,79 +121,6 @@ static void common_unbind(struct common *c)
 }
 
 /* -------------------------------------------------------------------- */
-
-#if 0
-/*
- * These two tables are not needed any more, but left in here
- * intentionally as documentation, to show how scancode2linux[]
- * was generated.
- *
- * Tables to map from scancode to Linux input layer keycode.
- * Scancodes are hardware-specific.  These maps assumes a
- * standard AT or PS/2 keyboard which is what QEMU feeds us.
- */
-const unsigned char atkbd_set2_keycode[512] = {
-
-     0, 67, 65, 63, 61, 59, 60, 88,  0, 68, 66, 64, 62, 15, 41,117,
-     0, 56, 42, 93, 29, 16,  2,  0,  0,  0, 44, 31, 30, 17,  3,  0,
-     0, 46, 45, 32, 18,  5,  4, 95,  0, 57, 47, 33, 20, 19,  6,183,
-     0, 49, 48, 35, 34, 21,  7,184,  0,  0, 50, 36, 22,  8,  9,185,
-     0, 51, 37, 23, 24, 11, 10,  0,  0, 52, 53, 38, 39, 25, 12,  0,
-     0, 89, 40,  0, 26, 13,  0,  0, 58, 54, 28, 27,  0, 43,  0, 85,
-     0, 86, 91, 90, 92,  0, 14, 94,  0, 79,124, 75, 71,121,  0,  0,
-    82, 83, 80, 76, 77, 72,  1, 69, 87, 78, 81, 74, 55, 73, 70, 99,
-
-      0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
-    217,100,255,  0, 97,165,  0,  0,156,  0,  0,  0,  0,  0,  0,125,
-    173,114,  0,113,  0,  0,  0,126,128,  0,  0,140,  0,  0,  0,127,
-    159,  0,115,  0,164,  0,  0,116,158,  0,150,166,  0,  0,  0,142,
-    157,  0,  0,  0,  0,  0,  0,  0,155,  0, 98,  0,  0,163,  0,  0,
-    226,  0,  0,  0,  0,  0,  0,  0,  0,255, 96,  0,  0,  0,143,  0,
-      0,  0,  0,  0,  0,  0,  0,  0,  0,107,  0,105,102,  0,  0,112,
-    110,111,108,112,106,103,  0,119,  0,118,109,  0, 99,104,119,  0,
-
-};
-
-const unsigned char atkbd_unxlate_table[128] = {
-
-      0,118, 22, 30, 38, 37, 46, 54, 61, 62, 70, 69, 78, 85,102, 13,
-     21, 29, 36, 45, 44, 53, 60, 67, 68, 77, 84, 91, 90, 20, 28, 27,
-     35, 43, 52, 51, 59, 66, 75, 76, 82, 14, 18, 93, 26, 34, 33, 42,
-     50, 49, 58, 65, 73, 74, 89,124, 17, 41, 88,  5,  6,  4, 12,  3,
-     11,  2, 10,  1,  9,119,126,108,117,125,123,107,115,116,121,105,
-    114,122,112,113,127, 96, 97,120,  7, 15, 23, 31, 39, 47, 55, 63,
-     71, 79, 86, 94,  8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 87,111,
-     19, 25, 57, 81, 83, 92, 95, 98, 99,100,101,103,104,106,109,110
-
-};
-#endif
-
-/*
- * for (i = 0; i < 128; i++) {
- *     scancode2linux[i] = atkbd_set2_keycode[atkbd_unxlate_table[i]];
- *     scancode2linux[i | 0x80] = atkbd_set2_keycode[atkbd_unxlate_table[i] | 0x80];
- * }
- */
-static const unsigned char scancode2linux[512] = {
-      0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15,
-     16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-     32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
-     48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
-     64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79,
-     80, 81, 82, 83, 99,  0, 86, 87, 88,117,  0,  0, 95,183,184,185,
-      0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
-     93,  0,  0, 89,  0,  0, 85, 91, 90, 92,  0, 94,  0,124,121,  0,
-
-      0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
-    165,  0,  0,  0,  0,  0,  0,  0,  0,163,  0,  0, 96, 97,  0,  0,
-    113,140,164,  0,166,  0,  0,  0,  0,  0,255,  0,  0,  0,114,  0,
-    115,  0,150,  0,  0, 98,255, 99,100,  0,  0,  0,  0,  0,  0,  0,
-      0,  0,  0,  0,  0,119,119,102,103,104,  0,105,112,106,118,107,
-    108,109,110,111,  0,  0,  0,  0,  0,  0,  0,125,126,127,116,142,
-      0,  0,  0,143,  0,217,156,173,128,159,158,157,155,226,  0,112,
-      0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
-};
-
 /* Send an event to the keyboard frontend driver */
 static int xenfb_kbd_event(struct XenInput *xenfb,
 			   union xenkbd_in_event *event)
@@ -260,87 +189,126 @@ static int xenfb_send_position(struct XenInput *xenfb,
     return xenfb_kbd_event(xenfb, &event);
 }
 
-/*
- * Send a key event from the client to the guest OS
- * QEMU gives us a raw scancode from an AT / PS/2 style keyboard.
- * We have to turn this into a Linux Input layer keycode.
- *
- * Extra complexity from the fact that with extended scancodes
- * (like those produced by arrow keys) this method gets called
- * twice, but we only want to send a single event. So we have to
- * track the '0xe0' scancode state & collapse the extended keys
- * as needed.
- *
- * Wish we could just send scancodes straight to the guest which
- * already has code for dealing with this...
- */
-static void xenfb_key_event(void *opaque, int scancode)
+static void xenfb_key_event(DeviceState *dev, QemuConsole *src,
+                            InputEvent *evt)
 {
-    struct XenInput *xenfb = opaque;
-    int down = 1;
-
-    if (scancode == 0xe0) {
-	xenfb->extended = 1;
-	return;
-    } else if (scancode & 0x80) {
-	scancode &= 0x7f;
-	down = 0;
+    struct XenInput *in = (struct XenInput *)dev;
+    InputKeyEvent *key = evt->u.key.data;
+    int qcode = qemu_input_key_value_to_qcode(key->key);
+
+    if (qcode) {
+        unsigned int lnx = qemu_input_qcode_to_linux(qcode);
+        if (lnx) {
+            xenfb_send_key(in, key->down, lnx);
+        }
     }
-    if (xenfb->extended) {
-	scancode |= 0x80;
-	xenfb->extended = 0;
+}
+
+static void xenfb_mouse_event(DeviceState *dev, QemuConsole *src,
+                              InputEvent *evt)
+{
+    struct XenInput *in = (struct XenInput *)dev;
+    InputBtnEvent *btn;
+    InputMoveEvent *move;
+
+    switch (evt->type) {
+    case INPUT_EVENT_KIND_BTN:
+        btn = evt->u.btn.data;
+        switch (btn->button) {
+        case INPUT_BUTTON_LEFT:
+            xenfb_send_key(in, btn->down, BTN_LEFT);
+            break;
+        case INPUT_BUTTON_RIGHT:
+            xenfb_send_key(in, btn->down, BTN_LEFT + 1);
+            break;
+        case INPUT_BUTTON_MIDDLE:
+            xenfb_send_key(in, btn->down, BTN_LEFT + 2);
+            break;
+        case INPUT_BUTTON_WHEEL_UP:
+            if (btn->down) {
+                in->mouse_wheel--;
+            }
+            break;
+        case INPUT_BUTTON_WHEEL_DOWN:
+            if (btn->down) {
+                in->mouse_wheel++;
+            }
+            break;
+        default:
+            break;
+        }
+        break;
+    case INPUT_EVENT_KIND_ABS:
+        move = evt->u.abs.data;
+        in->mouse_axes[move->axis] = move->value;
+        break;
+    case INPUT_EVENT_KIND_REL:
+        move = evt->u.rel.data;
+        in->mouse_axes[move->axis] += move->value;
+        break;
+    default:
+        break;
     }
-    xenfb_send_key(xenfb, down, scancode2linux[scancode]);
 }
 
-/*
- * Send a mouse event from the client to the guest OS
- *
- * The QEMU mouse can be in either relative, or absolute mode.
- * Movement is sent separately from button state, which has to
- * be encoded as virtual key events. We also don't actually get
- * given any button up/down events, so have to track changes in
- * the button state.
- */
-static void xenfb_mouse_event(void *opaque,
-			      int dx, int dy, int dz, int button_state)
+static void xenfb_mouse_sync(DeviceState *dev)
 {
-    struct XenInput *xenfb = opaque;
-    QemuConsole *con = qemu_console_lookup_by_index(0);
-    DisplaySurface *surface;
-    int dw, dh, i;
+    struct XenInput *in = (struct XenInput *)dev;
+    int dx, dy, dz;
 
-    if (!con) {
-        xen_pv_printf(&xenfb->c.xendev, 0, "No QEMU console available");
-        return;
-    }
+    dx = in->mouse_axes[INPUT_AXIS_X];
+    dy = in->mouse_axes[INPUT_AXIS_Y];
+    dz = in->mouse_wheel;
+
+    trace_xenfb_mouse_event(in, dx, dy, dz, 0,
+                            in->abs_pointer_wanted);
+
+    if (in->abs_pointer_wanted) {
+        QemuConsole *con = qemu_console_lookup_by_index(0);
+        DisplaySurface *surface;
+        int dw, dh;
+
+        if (!con) {
+            xen_pv_printf(&in->c.xendev, 0, "No QEMU console available");
+            return;
+        }
+
+        surface = qemu_console_surface(con);
+        dw = surface_width(surface);
+        dh = surface_height(surface);
+
+        dx = dx * (dw - 1) / 0x7fff;
+        dy = dy * (dh - 1) / 0x7fff;
 
-    surface = qemu_console_surface(con);
-    dw = surface_width(surface);
-    dh = surface_height(surface);
-
-    trace_xenfb_mouse_event(opaque, dx, dy, dz, button_state,
-                            xenfb->abs_pointer_wanted);
-    if (xenfb->abs_pointer_wanted)
-	xenfb_send_position(xenfb,
-			    dx * (dw - 1) / 0x7fff,
-			    dy * (dh - 1) / 0x7fff,
-			    dz);
-    else
-	xenfb_send_motion(xenfb, dx, dy, dz);
-
-    for (i = 0 ; i < 8 ; i++) {
-	int lastDown = xenfb->button_state & (1 << i);
-	int down = button_state & (1 << i);
-	if (down == lastDown)
-	    continue;
-
-	if (xenfb_send_key(xenfb, down, BTN_LEFT+i) < 0)
-	    return;
+        xenfb_send_position(in, dx, dy, dz);
+    } else {
+        xenfb_send_motion(in, dx, dy, dz);
+
+        in->mouse_axes[INPUT_AXIS_X] = 0;
+        in->mouse_axes[INPUT_AXIS_Y] = 0;
     }
-    xenfb->button_state = button_state;
+
+    in->mouse_wheel = 0;
 }
 
+static QemuInputHandler xenfb_keyboard = {
+    .name  = "Xen PVFB Keyboard",
+    .mask  = INPUT_EVENT_MASK_KEY,
+    .event = xenfb_key_event,
+};
+static QemuInputHandler xenfb_abs_mouse = {
+    .name  = "Xen PVFB Absolute Mouse",
+    .mask  = INPUT_EVENT_MASK_BTN | INPUT_EVENT_MASK_ABS,
+    .event = xenfb_mouse_event,
+    .sync  = xenfb_mouse_sync
+};
+static QemuInputHandler xenfb_rel_mouse = {
+    .name  = "Xen PVFB Mouse",
+    .mask  = INPUT_EVENT_MASK_BTN | INPUT_EVENT_MASK_REL,
+    .event = xenfb_mouse_event,
+    .sync  = xenfb_mouse_sync,
+};
+
 static int input_init(struct XenDevice *xendev)
 {
     xenstore_write_be_int(xendev, "feature-abs-pointer", 1);
@@ -356,7 +324,6 @@ static int input_initialise(struct XenDevice *xendev)
     if (rc != 0)
 	return rc;
 
-    qemu_add_kbd_event_handler(xenfb_key_event, in);
     return 0;
 }
 
@@ -369,24 +336,34 @@ static void input_connected(struct XenDevice *xendev)
         in->abs_pointer_wanted = 0;
     }
 
-    if (in->qmouse) {
-        qemu_remove_mouse_event_handler(in->qmouse);
+    if (in->qkbd) {
+        qemu_input_handler_unregister(in->qkbd);
+    }
+    if (in->qmou) {
+        qemu_input_handler_unregister(in->qmou);
     }
     trace_xenfb_input_connected(xendev, in->abs_pointer_wanted);
-    in->qmouse = qemu_add_mouse_event_handler(xenfb_mouse_event, in,
-					      in->abs_pointer_wanted,
-					      "Xen PVFB Mouse");
+
+    in->qkbd = qemu_input_handler_register((DeviceState *)in, &xenfb_keyboard);
+    in->qmou = qemu_input_handler_register((DeviceState *)in,
+        (in->abs_pointer_wanted ? &xenfb_abs_mouse : &xenfb_rel_mouse));
+
+    qemu_input_handler_activate(in->qkbd);
+    qemu_input_handler_activate(in->qmou);
 }
 
 static void input_disconnect(struct XenDevice *xendev)
 {
     struct XenInput *in = container_of(xendev, struct XenInput, c.xendev);
 
-    if (in->qmouse) {
-	qemu_remove_mouse_event_handler(in->qmouse);
-	in->qmouse = NULL;
+    if (in->qkbd) {
+        qemu_input_handler_unregister(in->qkbd);
+        in->qkbd = NULL;
+    }
+    if (in->qmou) {
+        qemu_input_handler_unregister(in->qmou);
+        in->qmou = NULL;
     }
-    qemu_add_kbd_event_handler(NULL, NULL);
     common_unbind(&in->c);
 }
 
-- 
2.1.4


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [Qemu-devel] [PATCH 2/3 v4] xenfb: Use Input Handlers directly

[Anthony PERARD]

On Tue, Sep 26, 2017 at 02:43:38PM +0000, Owen Smith wrote:
> Avoid the unneccessary calls through the input-legacy.c file by
> using the qemu_input_handler_*() calls directly. This did require
> reworking the event and sync handlers to use the reverse mapping
> from qcode to linux using qemu_input_qcode_to_linux().
> Removes the scancode2linux mapping, and supporting documention.
> 
> Signed-off-by: Owen Smith <owen.smith@citrix.com>

There is a call to trace_xenfb_key_event() that have been added
upstream, just before the call to xenfb_send_key(), that should probably
be added to this patch, otherwise, the patch does not apply. With that
fix, you can add my:
Acked-by: Anthony PERARD <anthony.perard@citrix.com>

Thanks,

-- 
Anthony PERARD

Re: [PATCH 2/3 v4] xenfb: Use Input Handlers directly

[Anthony PERARD]

On Tue, Sep 26, 2017 at 02:43:38PM +0000, Owen Smith wrote:
> Avoid the unneccessary calls through the input-legacy.c file by
> using the qemu_input_handler_*() calls directly. This did require
> reworking the event and sync handlers to use the reverse mapping
> from qcode to linux using qemu_input_qcode_to_linux().
> Removes the scancode2linux mapping, and supporting documention.
> 
> Signed-off-by: Owen Smith <owen.smith@citrix.com>

There is a call to trace_xenfb_key_event() that have been added
upstream, just before the call to xenfb_send_key(), that should probably
be added to this patch, otherwise, the patch does not apply. With that
fix, you can add my:
Acked-by: Anthony PERARD <anthony.perard@citrix.com>

Thanks,

-- 
Anthony PERARD

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[Qemu-devel] [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Owen Smith]

Writes "feature-raw-pointer" during init to indicate the backend
can pass raw unscaled values for absolute axes to the frontend.
Frontends set "request-raw-pointer" to indicate the backend should
not attempt to scale absolute values to console size.
"request-raw-pointer" is only valid if "request-abs-pointer" is
also set. Raw unscaled pointer values are in the range [0, 0x7fff]

Signed-off-by: Owen Smith <owen.smith@citrix.com>
---
 hw/display/xenfb.c | 37 ++++++++++++++++++++++++-------------
 1 file changed, 24 insertions(+), 13 deletions(-)

diff --git a/hw/display/xenfb.c b/hw/display/xenfb.c
index 33361b4..29428ae 100644
--- a/hw/display/xenfb.c
+++ b/hw/display/xenfb.c
@@ -52,6 +52,7 @@ struct common {
 struct XenInput {
     struct common c;
     int abs_pointer_wanted; /* Whether guest supports absolute pointer */
+    int raw_pointer_wanted; /* Whether guest supports raw (unscaled) pointer */
     QemuInputHandlerState *qkbd;
     QemuInputHandlerState *qmou;
     int mouse_axes[INPUT_AXIS__MAX];
@@ -264,21 +265,23 @@ static void xenfb_mouse_sync(DeviceState *dev)
                             in->abs_pointer_wanted);
 
     if (in->abs_pointer_wanted) {
-        QemuConsole *con = qemu_console_lookup_by_index(0);
-        DisplaySurface *surface;
-        int dw, dh;
-
-        if (!con) {
-            xen_pv_printf(&in->c.xendev, 0, "No QEMU console available");
-            return;
-        }
+        if (!in->raw_pointer_wanted) {
+            QemuConsole *con = qemu_console_lookup_by_index(0);
+            DisplaySurface *surface;
+            int dw, dh;
+
+            if (!con) {
+                xen_pv_printf(&in->c.xendev, 0, "No QEMU console available");
+                return;
+            }
 
-        surface = qemu_console_surface(con);
-        dw = surface_width(surface);
-        dh = surface_height(surface);
+            surface = qemu_console_surface(con);
+            dw = surface_width(surface);
+            dh = surface_height(surface);
 
-        dx = dx * (dw - 1) / 0x7fff;
-        dy = dy * (dh - 1) / 0x7fff;
+            dx = dx * (dw - 1) / 0x7fff;
+            dy = dy * (dh - 1) / 0x7fff;
+        }
 
         xenfb_send_position(in, dx, dy, dz);
     } else {
@@ -312,6 +315,7 @@ static QemuInputHandler xenfb_rel_mouse = {
 static int input_init(struct XenDevice *xendev)
 {
     xenstore_write_be_int(xendev, "feature-abs-pointer", 1);
+    xenstore_write_be_int(xendev, "feature-raw-pointer", 1);
     return 0;
 }
 
@@ -335,6 +339,13 @@ static void input_connected(struct XenDevice *xendev)
                              &in->abs_pointer_wanted) == -1) {
         in->abs_pointer_wanted = 0;
     }
+    if (xenstore_read_fe_int(xendev, "request-raw-pointer",
+                             &in->raw_pointer_wanted) == -1) {
+        in->raw_pointer_wanted = 0;
+    }
+    if (in->raw_pointer_wanted && !in->abs_pointer_wanted) {
+        xen_pv_printf(xendev, 0, "raw pointer set without absolute pointer.");
+    }
 
     if (in->qkbd) {
         qemu_input_handler_unregister(in->qkbd);
-- 
2.1.4

[PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Owen Smith]

Writes "feature-raw-pointer" during init to indicate the backend
can pass raw unscaled values for absolute axes to the frontend.
Frontends set "request-raw-pointer" to indicate the backend should
not attempt to scale absolute values to console size.
"request-raw-pointer" is only valid if "request-abs-pointer" is
also set. Raw unscaled pointer values are in the range [0, 0x7fff]

Signed-off-by: Owen Smith <owen.smith@citrix.com>
---
 hw/display/xenfb.c | 37 ++++++++++++++++++++++++-------------
 1 file changed, 24 insertions(+), 13 deletions(-)

diff --git a/hw/display/xenfb.c b/hw/display/xenfb.c
index 33361b4..29428ae 100644
--- a/hw/display/xenfb.c
+++ b/hw/display/xenfb.c
@@ -52,6 +52,7 @@ struct common {
 struct XenInput {
     struct common c;
     int abs_pointer_wanted; /* Whether guest supports absolute pointer */
+    int raw_pointer_wanted; /* Whether guest supports raw (unscaled) pointer */
     QemuInputHandlerState *qkbd;
     QemuInputHandlerState *qmou;
     int mouse_axes[INPUT_AXIS__MAX];
@@ -264,21 +265,23 @@ static void xenfb_mouse_sync(DeviceState *dev)
                             in->abs_pointer_wanted);
 
     if (in->abs_pointer_wanted) {
-        QemuConsole *con = qemu_console_lookup_by_index(0);
-        DisplaySurface *surface;
-        int dw, dh;
-
-        if (!con) {
-            xen_pv_printf(&in->c.xendev, 0, "No QEMU console available");
-            return;
-        }
+        if (!in->raw_pointer_wanted) {
+            QemuConsole *con = qemu_console_lookup_by_index(0);
+            DisplaySurface *surface;
+            int dw, dh;
+
+            if (!con) {
+                xen_pv_printf(&in->c.xendev, 0, "No QEMU console available");
+                return;
+            }
 
-        surface = qemu_console_surface(con);
-        dw = surface_width(surface);
-        dh = surface_height(surface);
+            surface = qemu_console_surface(con);
+            dw = surface_width(surface);
+            dh = surface_height(surface);
 
-        dx = dx * (dw - 1) / 0x7fff;
-        dy = dy * (dh - 1) / 0x7fff;
+            dx = dx * (dw - 1) / 0x7fff;
+            dy = dy * (dh - 1) / 0x7fff;
+        }
 
         xenfb_send_position(in, dx, dy, dz);
     } else {
@@ -312,6 +315,7 @@ static QemuInputHandler xenfb_rel_mouse = {
 static int input_init(struct XenDevice *xendev)
 {
     xenstore_write_be_int(xendev, "feature-abs-pointer", 1);
+    xenstore_write_be_int(xendev, "feature-raw-pointer", 1);
     return 0;
 }
 
@@ -335,6 +339,13 @@ static void input_connected(struct XenDevice *xendev)
                              &in->abs_pointer_wanted) == -1) {
         in->abs_pointer_wanted = 0;
     }
+    if (xenstore_read_fe_int(xendev, "request-raw-pointer",
+                             &in->raw_pointer_wanted) == -1) {
+        in->raw_pointer_wanted = 0;
+    }
+    if (in->raw_pointer_wanted && !in->abs_pointer_wanted) {
+        xen_pv_printf(xendev, 0, "raw pointer set without absolute pointer.");
+    }
 
     if (in->qkbd) {
         qemu_input_handler_unregister(in->qkbd);
-- 
2.1.4


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [Qemu-devel] [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Anthony PERARD]

On Tue, Sep 26, 2017 at 02:43:39PM +0000, Owen Smith wrote:
> Writes "feature-raw-pointer" during init to indicate the backend
> can pass raw unscaled values for absolute axes to the frontend.
> Frontends set "request-raw-pointer" to indicate the backend should
> not attempt to scale absolute values to console size.
> "request-raw-pointer" is only valid if "request-abs-pointer" is
> also set. Raw unscaled pointer values are in the range [0, 0x7fff]
> 
> Signed-off-by: Owen Smith <owen.smith@citrix.com>

Hi Owen,

Why did you remove the following from the commit description?
> "feature-raw-pointer" and "request-raw-pointer" added to Xen
> header in commit 7868654ff7fe5e4a2eeae2b277644fa884a5031e

I think that with it, you could have kept stefano's reviewed-by tag.

Thanks,

-- 
Anthony PERARD

Re: [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Anthony PERARD]

On Tue, Sep 26, 2017 at 02:43:39PM +0000, Owen Smith wrote:
> Writes "feature-raw-pointer" during init to indicate the backend
> can pass raw unscaled values for absolute axes to the frontend.
> Frontends set "request-raw-pointer" to indicate the backend should
> not attempt to scale absolute values to console size.
> "request-raw-pointer" is only valid if "request-abs-pointer" is
> also set. Raw unscaled pointer values are in the range [0, 0x7fff]
> 
> Signed-off-by: Owen Smith <owen.smith@citrix.com>

Hi Owen,

Why did you remove the following from the commit description?
> "feature-raw-pointer" and "request-raw-pointer" added to Xen
> header in commit 7868654ff7fe5e4a2eeae2b277644fa884a5031e

I think that with it, you could have kept stefano's reviewed-by tag.

Thanks,

-- 
Anthony PERARD

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [Qemu-devel] [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Stefano Stabellini]

On Mon, 2 Oct 2017, Anthony PERARD wrote:
> On Tue, Sep 26, 2017 at 02:43:39PM +0000, Owen Smith wrote:
> > Writes "feature-raw-pointer" during init to indicate the backend
> > can pass raw unscaled values for absolute axes to the frontend.
> > Frontends set "request-raw-pointer" to indicate the backend should
> > not attempt to scale absolute values to console size.
> > "request-raw-pointer" is only valid if "request-abs-pointer" is
> > also set. Raw unscaled pointer values are in the range [0, 0x7fff]
> > 
> > Signed-off-by: Owen Smith <owen.smith@citrix.com>
> 
> Hi Owen,
> 
> Why did you remove the following from the commit description?
> > "feature-raw-pointer" and "request-raw-pointer" added to Xen
> > header in commit 7868654ff7fe5e4a2eeae2b277644fa884a5031e
> 
> I think that with it, you could have kept stefano's reviewed-by tag.

Hi Anthony,

Have you tested this series with a few of different guests? Do you
consider it safe to merge? If so, we can send it upstream (either via
xen or via ui as Gerd kindly offered). 

Re: [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Stefano Stabellini]

On Mon, 2 Oct 2017, Anthony PERARD wrote:
> On Tue, Sep 26, 2017 at 02:43:39PM +0000, Owen Smith wrote:
> > Writes "feature-raw-pointer" during init to indicate the backend
> > can pass raw unscaled values for absolute axes to the frontend.
> > Frontends set "request-raw-pointer" to indicate the backend should
> > not attempt to scale absolute values to console size.
> > "request-raw-pointer" is only valid if "request-abs-pointer" is
> > also set. Raw unscaled pointer values are in the range [0, 0x7fff]
> > 
> > Signed-off-by: Owen Smith <owen.smith@citrix.com>
> 
> Hi Owen,
> 
> Why did you remove the following from the commit description?
> > "feature-raw-pointer" and "request-raw-pointer" added to Xen
> > header in commit 7868654ff7fe5e4a2eeae2b277644fa884a5031e
> 
> I think that with it, you could have kept stefano's reviewed-by tag.

Hi Anthony,

Have you tested this series with a few of different guests? Do you
consider it safe to merge? If so, we can send it upstream (either via
xen or via ui as Gerd kindly offered). 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [Qemu-devel] [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Anthony PERARD]

On Tue, Oct 10, 2017 at 04:52:48PM -0700, Stefano Stabellini wrote:
> On Mon, 2 Oct 2017, Anthony PERARD wrote:
> > On Tue, Sep 26, 2017 at 02:43:39PM +0000, Owen Smith wrote:
> > > Writes "feature-raw-pointer" during init to indicate the backend
> > > can pass raw unscaled values for absolute axes to the frontend.
> > > Frontends set "request-raw-pointer" to indicate the backend should
> > > not attempt to scale absolute values to console size.
> > > "request-raw-pointer" is only valid if "request-abs-pointer" is
> > > also set. Raw unscaled pointer values are in the range [0, 0x7fff]
> > > 
> > > Signed-off-by: Owen Smith <owen.smith@citrix.com>
> > 
> > Hi Owen,
> > 
> > Why did you remove the following from the commit description?
> > > "feature-raw-pointer" and "request-raw-pointer" added to Xen
> > > header in commit 7868654ff7fe5e4a2eeae2b277644fa884a5031e
> > 
> > I think that with it, you could have kept stefano's reviewed-by tag.
> 
> Hi Anthony,
> 
> Have you tested this series with a few of different guests? Do you
> consider it safe to merge? If so, we can send it upstream (either via
> xen or via ui as Gerd kindly offered). 

Yes, I think it's fine.

The only observation I have is that on a Linux guest, when I have
usbdevice=tablet, with this series the pv mouse seems to become the
primary way of gueting mouse events (without, the tablet is primary).
So, on my VNC client instead of having both mouse in the guest and on my
desktop being at the same place, there is like a zoom of the mouse (the
zoom centered on the top-left corner). (That's better than relative
mouse event that we can get with the emulation.)

-- 
Anthony PERARD

Re: [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Anthony PERARD]

On Tue, Oct 10, 2017 at 04:52:48PM -0700, Stefano Stabellini wrote:
> On Mon, 2 Oct 2017, Anthony PERARD wrote:
> > On Tue, Sep 26, 2017 at 02:43:39PM +0000, Owen Smith wrote:
> > > Writes "feature-raw-pointer" during init to indicate the backend
> > > can pass raw unscaled values for absolute axes to the frontend.
> > > Frontends set "request-raw-pointer" to indicate the backend should
> > > not attempt to scale absolute values to console size.
> > > "request-raw-pointer" is only valid if "request-abs-pointer" is
> > > also set. Raw unscaled pointer values are in the range [0, 0x7fff]
> > > 
> > > Signed-off-by: Owen Smith <owen.smith@citrix.com>
> > 
> > Hi Owen,
> > 
> > Why did you remove the following from the commit description?
> > > "feature-raw-pointer" and "request-raw-pointer" added to Xen
> > > header in commit 7868654ff7fe5e4a2eeae2b277644fa884a5031e
> > 
> > I think that with it, you could have kept stefano's reviewed-by tag.
> 
> Hi Anthony,
> 
> Have you tested this series with a few of different guests? Do you
> consider it safe to merge? If so, we can send it upstream (either via
> xen or via ui as Gerd kindly offered). 

Yes, I think it's fine.

The only observation I have is that on a Linux guest, when I have
usbdevice=tablet, with this series the pv mouse seems to become the
primary way of gueting mouse events (without, the tablet is primary).
So, on my VNC client instead of having both mouse in the guest and on my
desktop being at the same place, there is like a zoom of the mouse (the
zoom centered on the top-left corner). (That's better than relative
mouse event that we can get with the emulation.)

-- 
Anthony PERARD

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [Qemu-devel] [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Stefano Stabellini]

On Wed, 11 Oct 2017, Anthony PERARD wrote:
> On Tue, Oct 10, 2017 at 04:52:48PM -0700, Stefano Stabellini wrote:
> > On Mon, 2 Oct 2017, Anthony PERARD wrote:
> > > On Tue, Sep 26, 2017 at 02:43:39PM +0000, Owen Smith wrote:
> > > > Writes "feature-raw-pointer" during init to indicate the backend
> > > > can pass raw unscaled values for absolute axes to the frontend.
> > > > Frontends set "request-raw-pointer" to indicate the backend should
> > > > not attempt to scale absolute values to console size.
> > > > "request-raw-pointer" is only valid if "request-abs-pointer" is
> > > > also set. Raw unscaled pointer values are in the range [0, 0x7fff]
> > > > 
> > > > Signed-off-by: Owen Smith <owen.smith@citrix.com>
> > > 
> > > Hi Owen,
> > > 
> > > Why did you remove the following from the commit description?
> > > > "feature-raw-pointer" and "request-raw-pointer" added to Xen
> > > > header in commit 7868654ff7fe5e4a2eeae2b277644fa884a5031e
> > > 
> > > I think that with it, you could have kept stefano's reviewed-by tag.
> > 
> > Hi Anthony,
> > 
> > Have you tested this series with a few of different guests? Do you
> > consider it safe to merge? If so, we can send it upstream (either via
> > xen or via ui as Gerd kindly offered). 
> 
> Yes, I think it's fine.
> 
> The only observation I have is that on a Linux guest, when I have
> usbdevice=tablet, with this series the pv mouse seems to become the
> primary way of gueting mouse events (without, the tablet is primary).
> So, on my VNC client instead of having both mouse in the guest and on my
> desktop being at the same place, there is like a zoom of the mouse (the
> zoom centered on the top-left corner). (That's better than relative
> mouse event that we can get with the emulation.)

Thanks for testing. I am not completely sure about what should be the
right behavior when both usbdevice=tablet and pvmouse are present.
Typically, PV devices take precedence over emulated devices, so maybe
it is OK that PV mouse is the primary device in this case.

But we would need to document this behavioral change in the commit
descriptions.

The other question is whether the "zoom of the mouse" you are seeing is
normal or whether we can "fix" it somehow. I guess it has always been
the case for PV mouse? It is not something new, is it?

Re: [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Stefano Stabellini]

On Wed, 11 Oct 2017, Anthony PERARD wrote:
> On Tue, Oct 10, 2017 at 04:52:48PM -0700, Stefano Stabellini wrote:
> > On Mon, 2 Oct 2017, Anthony PERARD wrote:
> > > On Tue, Sep 26, 2017 at 02:43:39PM +0000, Owen Smith wrote:
> > > > Writes "feature-raw-pointer" during init to indicate the backend
> > > > can pass raw unscaled values for absolute axes to the frontend.
> > > > Frontends set "request-raw-pointer" to indicate the backend should
> > > > not attempt to scale absolute values to console size.
> > > > "request-raw-pointer" is only valid if "request-abs-pointer" is
> > > > also set. Raw unscaled pointer values are in the range [0, 0x7fff]
> > > > 
> > > > Signed-off-by: Owen Smith <owen.smith@citrix.com>
> > > 
> > > Hi Owen,
> > > 
> > > Why did you remove the following from the commit description?
> > > > "feature-raw-pointer" and "request-raw-pointer" added to Xen
> > > > header in commit 7868654ff7fe5e4a2eeae2b277644fa884a5031e
> > > 
> > > I think that with it, you could have kept stefano's reviewed-by tag.
> > 
> > Hi Anthony,
> > 
> > Have you tested this series with a few of different guests? Do you
> > consider it safe to merge? If so, we can send it upstream (either via
> > xen or via ui as Gerd kindly offered). 
> 
> Yes, I think it's fine.
> 
> The only observation I have is that on a Linux guest, when I have
> usbdevice=tablet, with this series the pv mouse seems to become the
> primary way of gueting mouse events (without, the tablet is primary).
> So, on my VNC client instead of having both mouse in the guest and on my
> desktop being at the same place, there is like a zoom of the mouse (the
> zoom centered on the top-left corner). (That's better than relative
> mouse event that we can get with the emulation.)

Thanks for testing. I am not completely sure about what should be the
right behavior when both usbdevice=tablet and pvmouse are present.
Typically, PV devices take precedence over emulated devices, so maybe
it is OK that PV mouse is the primary device in this case.

But we would need to document this behavioral change in the commit
descriptions.

The other question is whether the "zoom of the mouse" you are seeing is
normal or whether we can "fix" it somehow. I guess it has always been
the case for PV mouse? It is not something new, is it?

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [Qemu-devel] [Xen-devel] [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Paul Durrant]

> -----Original Message-----
> From: Xen-devel [mailto:xen-devel-bounces@lists.xen.org] On Behalf Of
> Stefano Stabellini
> Sent: 11 October 2017 21:19
> To: Anthony Perard <anthony.perard@citrix.com>
> Cc: qemu-devel@nongnu.org; xen-devel@lists.xenproject.org; Stefano
> Stabellini <sstabellini@kernel.org>; Owen Smith <owen.smith@citrix.com>;
> kraxel@redhat.com
> Subject: Re: [Xen-devel] [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-
> pointer
> 
> On Wed, 11 Oct 2017, Anthony PERARD wrote:
> > On Tue, Oct 10, 2017 at 04:52:48PM -0700, Stefano Stabellini wrote:
> > > On Mon, 2 Oct 2017, Anthony PERARD wrote:
> > > > On Tue, Sep 26, 2017 at 02:43:39PM +0000, Owen Smith wrote:
> > > > > Writes "feature-raw-pointer" during init to indicate the backend
> > > > > can pass raw unscaled values for absolute axes to the frontend.
> > > > > Frontends set "request-raw-pointer" to indicate the backend should
> > > > > not attempt to scale absolute values to console size.
> > > > > "request-raw-pointer" is only valid if "request-abs-pointer" is
> > > > > also set. Raw unscaled pointer values are in the range [0, 0x7fff]
> > > > >
> > > > > Signed-off-by: Owen Smith <owen.smith@citrix.com>
> > > >
> > > > Hi Owen,
> > > >
> > > > Why did you remove the following from the commit description?
> > > > > "feature-raw-pointer" and "request-raw-pointer" added to Xen
> > > > > header in commit 7868654ff7fe5e4a2eeae2b277644fa884a5031e
> > > >
> > > > I think that with it, you could have kept stefano's reviewed-by tag.
> > >
> > > Hi Anthony,
> > >
> > > Have you tested this series with a few of different guests? Do you
> > > consider it safe to merge? If so, we can send it upstream (either via
> > > xen or via ui as Gerd kindly offered).
> >
> > Yes, I think it's fine.
> >
> > The only observation I have is that on a Linux guest, when I have
> > usbdevice=tablet, with this series the pv mouse seems to become the
> > primary way of gueting mouse events (without, the tablet is primary).
> > So, on my VNC client instead of having both mouse in the guest and on my
> > desktop being at the same place, there is like a zoom of the mouse (the
> > zoom centered on the top-left corner). (That's better than relative
> > mouse event that we can get with the emulation.)
> 
> Thanks for testing. I am not completely sure about what should be the
> right behavior when both usbdevice=tablet and pvmouse are present.
> Typically, PV devices take precedence over emulated devices, so maybe
> it is OK that PV mouse is the primary device in this case.
> 
> But we would need to document this behavioral change in the commit
> descriptions.
> 

It's probably OS specific though. I guess the behaviour changed because the OS favours absolute pointing devices over relative ones and how it has two absolute ones to choose from. How it reconciles those, who knows?

  Paul

> The other question is whether the "zoom of the mouse" you are seeing is
> normal or whether we can "fix" it somehow. I guess it has always been
> the case for PV mouse? It is not something new, is it?
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> https://lists.xen.org/xen-devel

Re: [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Paul Durrant]

> -----Original Message-----
> From: Xen-devel [mailto:xen-devel-bounces@lists.xen.org] On Behalf Of
> Stefano Stabellini
> Sent: 11 October 2017 21:19
> To: Anthony Perard <anthony.perard@citrix.com>
> Cc: qemu-devel@nongnu.org; xen-devel@lists.xenproject.org; Stefano
> Stabellini <sstabellini@kernel.org>; Owen Smith <owen.smith@citrix.com>;
> kraxel@redhat.com
> Subject: Re: [Xen-devel] [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-
> pointer
> 
> On Wed, 11 Oct 2017, Anthony PERARD wrote:
> > On Tue, Oct 10, 2017 at 04:52:48PM -0700, Stefano Stabellini wrote:
> > > On Mon, 2 Oct 2017, Anthony PERARD wrote:
> > > > On Tue, Sep 26, 2017 at 02:43:39PM +0000, Owen Smith wrote:
> > > > > Writes "feature-raw-pointer" during init to indicate the backend
> > > > > can pass raw unscaled values for absolute axes to the frontend.
> > > > > Frontends set "request-raw-pointer" to indicate the backend should
> > > > > not attempt to scale absolute values to console size.
> > > > > "request-raw-pointer" is only valid if "request-abs-pointer" is
> > > > > also set. Raw unscaled pointer values are in the range [0, 0x7fff]
> > > > >
> > > > > Signed-off-by: Owen Smith <owen.smith@citrix.com>
> > > >
> > > > Hi Owen,
> > > >
> > > > Why did you remove the following from the commit description?
> > > > > "feature-raw-pointer" and "request-raw-pointer" added to Xen
> > > > > header in commit 7868654ff7fe5e4a2eeae2b277644fa884a5031e
> > > >
> > > > I think that with it, you could have kept stefano's reviewed-by tag.
> > >
> > > Hi Anthony,
> > >
> > > Have you tested this series with a few of different guests? Do you
> > > consider it safe to merge? If so, we can send it upstream (either via
> > > xen or via ui as Gerd kindly offered).
> >
> > Yes, I think it's fine.
> >
> > The only observation I have is that on a Linux guest, when I have
> > usbdevice=tablet, with this series the pv mouse seems to become the
> > primary way of gueting mouse events (without, the tablet is primary).
> > So, on my VNC client instead of having both mouse in the guest and on my
> > desktop being at the same place, there is like a zoom of the mouse (the
> > zoom centered on the top-left corner). (That's better than relative
> > mouse event that we can get with the emulation.)
> 
> Thanks for testing. I am not completely sure about what should be the
> right behavior when both usbdevice=tablet and pvmouse are present.
> Typically, PV devices take precedence over emulated devices, so maybe
> it is OK that PV mouse is the primary device in this case.
> 
> But we would need to document this behavioral change in the commit
> descriptions.
> 

It's probably OS specific though. I guess the behaviour changed because the OS favours absolute pointing devices over relative ones and how it has two absolute ones to choose from. How it reconciles those, who knows?

  Paul

> The other question is whether the "zoom of the mouse" you are seeing is
> normal or whether we can "fix" it somehow. I guess it has always been
> the case for PV mouse? It is not something new, is it?
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> https://lists.xen.org/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [Qemu-devel] [Xen-devel] [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Gerd Hoffmann]

  Hi,

> It's probably OS specific though. I guess the behaviour changed
> because the OS favours absolute pointing devices over relative ones
> and how it has two absolute ones to choose from. How it reconciles
> those, who knows?

Typically hid emulation calls qemu_input_handler_activate() when the
guest initializes the device, which moves the device to the top of the
priority list.

Visible effect on a typical guest with ps/2 mouse and usb-tablet is
that qemu switches from relative mode (mouse) to absolute mode (tablet)
 when the guest loads the usb hid driver.

I suspect pvmouse is doing the same thing.  So it may simply depend on
guest driver load order whenever pvmouse or usb-tablet is used.

Simplest fix is probably to only attach the device you plan to use to
the guest.  If you can't turn off pvmouse for xen guests then you might
want drop the qemu_input_handler_activate() call, so it behaves simliar
to the ps/2 mouse (is used in case no other pointer device is present).

HTH,
  Gerd

Re: [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Gerd Hoffmann]

  Hi,

> It's probably OS specific though. I guess the behaviour changed
> because the OS favours absolute pointing devices over relative ones
> and how it has two absolute ones to choose from. How it reconciles
> those, who knows?

Typically hid emulation calls qemu_input_handler_activate() when the
guest initializes the device, which moves the device to the top of the
priority list.

Visible effect on a typical guest with ps/2 mouse and usb-tablet is
that qemu switches from relative mode (mouse) to absolute mode (tablet)
 when the guest loads the usb hid driver.

I suspect pvmouse is doing the same thing.  So it may simply depend on
guest driver load order whenever pvmouse or usb-tablet is used.

Simplest fix is probably to only attach the device you plan to use to
the guest.  If you can't turn off pvmouse for xen guests then you might
want drop the qemu_input_handler_activate() call, so it behaves simliar
to the ps/2 mouse (is used in case no other pointer device is present).

HTH,
  Gerd


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [Qemu-devel] [Xen-devel] [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Paul Durrant]

> -----Original Message-----
> From: Gerd Hoffmann [mailto:kraxel@redhat.com]
> Sent: 12 October 2017 10:26
> To: Paul Durrant <Paul.Durrant@citrix.com>; 'Stefano Stabellini'
> <sstabellini@kernel.org>; Anthony Perard <anthony.perard@citrix.com>
> Cc: qemu-devel@nongnu.org; xen-devel@lists.xenproject.org; Owen Smith
> <owen.smith@citrix.com>
> Subject: Re: [Xen-devel] [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-
> pointer
> 
>   Hi,
> 
> > It's probably OS specific though. I guess the behaviour changed
> > because the OS favours absolute pointing devices over relative ones
> > and how it has two absolute ones to choose from. How it reconciles
> > those, who knows?
> 
> Typically hid emulation calls qemu_input_handler_activate() when the
> guest initializes the device, which moves the device to the top of the
> priority list.
> 
> Visible effect on a typical guest with ps/2 mouse and usb-tablet is
> that qemu switches from relative mode (mouse) to absolute mode (tablet)
>  when the guest loads the usb hid driver.
> 
> I suspect pvmouse is doing the same thing.  So it may simply depend on
> guest driver load order whenever pvmouse or usb-tablet is used.
> 
> Simplest fix is probably to only attach the device you plan to use to
> the guest.  If you can't turn off pvmouse for xen guests then you might
> want drop the qemu_input_handler_activate() call, so it behaves simliar
> to the ps/2 mouse (is used in case no other pointer device is present).

Avoiding the activate call sounds reasonable and should avoid the behavioural change.

Cheers,

  Paul

> 
> HTH,
>   Gerd

Re: [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Paul Durrant]

> -----Original Message-----
> From: Gerd Hoffmann [mailto:kraxel@redhat.com]
> Sent: 12 October 2017 10:26
> To: Paul Durrant <Paul.Durrant@citrix.com>; 'Stefano Stabellini'
> <sstabellini@kernel.org>; Anthony Perard <anthony.perard@citrix.com>
> Cc: qemu-devel@nongnu.org; xen-devel@lists.xenproject.org; Owen Smith
> <owen.smith@citrix.com>
> Subject: Re: [Xen-devel] [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-
> pointer
> 
>   Hi,
> 
> > It's probably OS specific though. I guess the behaviour changed
> > because the OS favours absolute pointing devices over relative ones
> > and how it has two absolute ones to choose from. How it reconciles
> > those, who knows?
> 
> Typically hid emulation calls qemu_input_handler_activate() when the
> guest initializes the device, which moves the device to the top of the
> priority list.
> 
> Visible effect on a typical guest with ps/2 mouse and usb-tablet is
> that qemu switches from relative mode (mouse) to absolute mode (tablet)
>  when the guest loads the usb hid driver.
> 
> I suspect pvmouse is doing the same thing.  So it may simply depend on
> guest driver load order whenever pvmouse or usb-tablet is used.
> 
> Simplest fix is probably to only attach the device you plan to use to
> the guest.  If you can't turn off pvmouse for xen guests then you might
> want drop the qemu_input_handler_activate() call, so it behaves simliar
> to the ps/2 mouse (is used in case no other pointer device is present).

Avoiding the activate call sounds reasonable and should avoid the behavioural change.

Cheers,

  Paul

> 
> HTH,
>   Gerd

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [Qemu-devel] [Xen-devel] [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Stefano Stabellini]

On Thu, 12 Oct 2017, Paul Durrant wrote:
> > -----Original Message-----
> > From: Gerd Hoffmann [mailto:kraxel@redhat.com]
> > Sent: 12 October 2017 10:26
> > To: Paul Durrant <Paul.Durrant@citrix.com>; 'Stefano Stabellini'
> > <sstabellini@kernel.org>; Anthony Perard <anthony.perard@citrix.com>
> > Cc: qemu-devel@nongnu.org; xen-devel@lists.xenproject.org; Owen Smith
> > <owen.smith@citrix.com>
> > Subject: Re: [Xen-devel] [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-
> > pointer
> > 
> >   Hi,
> > 
> > > It's probably OS specific though. I guess the behaviour changed
> > > because the OS favours absolute pointing devices over relative ones
> > > and how it has two absolute ones to choose from. How it reconciles
> > > those, who knows?
> > 
> > Typically hid emulation calls qemu_input_handler_activate() when the
> > guest initializes the device, which moves the device to the top of the
> > priority list.
> > 
> > Visible effect on a typical guest with ps/2 mouse and usb-tablet is
> > that qemu switches from relative mode (mouse) to absolute mode (tablet)
> >  when the guest loads the usb hid driver.
> > 
> > I suspect pvmouse is doing the same thing.  So it may simply depend on
> > guest driver load order whenever pvmouse or usb-tablet is used.
> > 
> > Simplest fix is probably to only attach the device you plan to use to
> > the guest.  If you can't turn off pvmouse for xen guests then you might
> > want drop the qemu_input_handler_activate() call, so it behaves simliar
> > to the ps/2 mouse (is used in case no other pointer device is present).
> 
> Avoiding the activate call sounds reasonable and should avoid the behavioural change.

+1

Owen, are you up for resubmitting the series with this small change?

Re: [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Stefano Stabellini]

On Thu, 12 Oct 2017, Paul Durrant wrote:
> > -----Original Message-----
> > From: Gerd Hoffmann [mailto:kraxel@redhat.com]
> > Sent: 12 October 2017 10:26
> > To: Paul Durrant <Paul.Durrant@citrix.com>; 'Stefano Stabellini'
> > <sstabellini@kernel.org>; Anthony Perard <anthony.perard@citrix.com>
> > Cc: qemu-devel@nongnu.org; xen-devel@lists.xenproject.org; Owen Smith
> > <owen.smith@citrix.com>
> > Subject: Re: [Xen-devel] [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-
> > pointer
> > 
> >   Hi,
> > 
> > > It's probably OS specific though. I guess the behaviour changed
> > > because the OS favours absolute pointing devices over relative ones
> > > and how it has two absolute ones to choose from. How it reconciles
> > > those, who knows?
> > 
> > Typically hid emulation calls qemu_input_handler_activate() when the
> > guest initializes the device, which moves the device to the top of the
> > priority list.
> > 
> > Visible effect on a typical guest with ps/2 mouse and usb-tablet is
> > that qemu switches from relative mode (mouse) to absolute mode (tablet)
> >  when the guest loads the usb hid driver.
> > 
> > I suspect pvmouse is doing the same thing.  So it may simply depend on
> > guest driver load order whenever pvmouse or usb-tablet is used.
> > 
> > Simplest fix is probably to only attach the device you plan to use to
> > the guest.  If you can't turn off pvmouse for xen guests then you might
> > want drop the qemu_input_handler_activate() call, so it behaves simliar
> > to the ps/2 mouse (is used in case no other pointer device is present).
> 
> Avoiding the activate call sounds reasonable and should avoid the behavioural change.

+1

Owen, are you up for resubmitting the series with this small change?

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [Qemu-devel] [Xen-devel] [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Owen Smith]

> -----Original Message-----
> From: Stefano Stabellini [mailto:sstabellini@kernel.org]
> Sent: 12 October 2017 18:27
> To: Paul Durrant <Paul.Durrant@citrix.com>
> Cc: 'Gerd Hoffmann' <kraxel@redhat.com>; 'Stefano Stabellini'
> <sstabellini@kernel.org>; Anthony Perard <anthony.perard@citrix.com>;
> qemu-devel@nongnu.org; xen-devel@lists.xenproject.org; Owen Smith
> <owen.smith@citrix.com>
> Subject: RE: [Xen-devel] [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-
> pointer
> 
> On Thu, 12 Oct 2017, Paul Durrant wrote:
> > > -----Original Message-----
> > > From: Gerd Hoffmann [mailto:kraxel@redhat.com]
> > > Sent: 12 October 2017 10:26
> > > To: Paul Durrant <Paul.Durrant@citrix.com>; 'Stefano Stabellini'
> > > <sstabellini@kernel.org>; Anthony Perard <anthony.perard@citrix.com>
> > > Cc: qemu-devel@nongnu.org; xen-devel@lists.xenproject.org; Owen
> > > Smith <owen.smith@citrix.com>
> > > Subject: Re: [Xen-devel] [PATCH 3/3 v4] xenfb: Add
> > > [feature|request]-raw- pointer
> > >
> > >   Hi,
> > >
> > > > It's probably OS specific though. I guess the behaviour changed
> > > > because the OS favours absolute pointing devices over relative
> > > > ones and how it has two absolute ones to choose from. How it
> > > > reconciles those, who knows?
> > >
> > > Typically hid emulation calls qemu_input_handler_activate() when the
> > > guest initializes the device, which moves the device to the top of
> > > the priority list.
> > >
> > > Visible effect on a typical guest with ps/2 mouse and usb-tablet is
> > > that qemu switches from relative mode (mouse) to absolute mode
> > > (tablet)  when the guest loads the usb hid driver.
> > >
> > > I suspect pvmouse is doing the same thing.  So it may simply depend
> > > on guest driver load order whenever pvmouse or usb-tablet is used.
> > >
> > > Simplest fix is probably to only attach the device you plan to use
> > > to the guest.  If you can't turn off pvmouse for xen guests then you
> > > might want drop the qemu_input_handler_activate() call, so it
> > > behaves simliar to the ps/2 mouse (is used in case no other pointer
> device is present).
> >
> > Avoiding the activate call sounds reasonable and should avoid the
> behavioural change.
> 
> +1
> 
> Owen, are you up for resubmitting the series with this small change?

Having just rebuilt my xen / linux host, and checked qemu, it looks like the keycodemapdb patches have gone in, so I'll rebase and re-submit this series

Owen

Re: [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Owen Smith]

> -----Original Message-----
> From: Stefano Stabellini [mailto:sstabellini@kernel.org]
> Sent: 12 October 2017 18:27
> To: Paul Durrant <Paul.Durrant@citrix.com>
> Cc: 'Gerd Hoffmann' <kraxel@redhat.com>; 'Stefano Stabellini'
> <sstabellini@kernel.org>; Anthony Perard <anthony.perard@citrix.com>;
> qemu-devel@nongnu.org; xen-devel@lists.xenproject.org; Owen Smith
> <owen.smith@citrix.com>
> Subject: RE: [Xen-devel] [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-
> pointer
> 
> On Thu, 12 Oct 2017, Paul Durrant wrote:
> > > -----Original Message-----
> > > From: Gerd Hoffmann [mailto:kraxel@redhat.com]
> > > Sent: 12 October 2017 10:26
> > > To: Paul Durrant <Paul.Durrant@citrix.com>; 'Stefano Stabellini'
> > > <sstabellini@kernel.org>; Anthony Perard <anthony.perard@citrix.com>
> > > Cc: qemu-devel@nongnu.org; xen-devel@lists.xenproject.org; Owen
> > > Smith <owen.smith@citrix.com>
> > > Subject: Re: [Xen-devel] [PATCH 3/3 v4] xenfb: Add
> > > [feature|request]-raw- pointer
> > >
> > >   Hi,
> > >
> > > > It's probably OS specific though. I guess the behaviour changed
> > > > because the OS favours absolute pointing devices over relative
> > > > ones and how it has two absolute ones to choose from. How it
> > > > reconciles those, who knows?
> > >
> > > Typically hid emulation calls qemu_input_handler_activate() when the
> > > guest initializes the device, which moves the device to the top of
> > > the priority list.
> > >
> > > Visible effect on a typical guest with ps/2 mouse and usb-tablet is
> > > that qemu switches from relative mode (mouse) to absolute mode
> > > (tablet)  when the guest loads the usb hid driver.
> > >
> > > I suspect pvmouse is doing the same thing.  So it may simply depend
> > > on guest driver load order whenever pvmouse or usb-tablet is used.
> > >
> > > Simplest fix is probably to only attach the device you plan to use
> > > to the guest.  If you can't turn off pvmouse for xen guests then you
> > > might want drop the qemu_input_handler_activate() call, so it
> > > behaves simliar to the ps/2 mouse (is used in case no other pointer
> device is present).
> >
> > Avoiding the activate call sounds reasonable and should avoid the
> behavioural change.
> 
> +1
> 
> Owen, are you up for resubmitting the series with this small change?

Having just rebuilt my xen / linux host, and checked qemu, it looks like the keycodemapdb patches have gone in, so I'll rebase and re-submit this series

Owen

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [Qemu-devel] [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Anthony PERARD]

On Wed, Oct 11, 2017 at 01:19:25PM -0700, Stefano Stabellini wrote:
> On Wed, 11 Oct 2017, Anthony PERARD wrote:
> > The only observation I have is that on a Linux guest, when I have
> > usbdevice=tablet, with this series the pv mouse seems to become the
> > primary way of gueting mouse events (without, the tablet is primary).
> > So, on my VNC client instead of having both mouse in the guest and on my
> > desktop being at the same place, there is like a zoom of the mouse (the
> > zoom centered on the top-left corner). (That's better than relative
> > mouse event that we can get with the emulation.)
> 
> Thanks for testing. I am not completely sure about what should be the
> right behavior when both usbdevice=tablet and pvmouse are present.
> Typically, PV devices take precedence over emulated devices, so maybe
> it is OK that PV mouse is the primary device in this case.
> 
> But we would need to document this behavioral change in the commit
> descriptions.

Maybe something like "WARNING: pvmouse is fixed and now works!" :)

I think the change come from the fact that without the second patch, the
pv mouse doesn't work (or at least, I did not manage to make it work).

> The other question is whether the "zoom of the mouse" you are seeing is
> normal or whether we can "fix" it somehow. I guess it has always been
> the case for PV mouse? It is not something new, is it?

Yes, I think it always as been the case for PV mouse. I pretty sure I've
seen this behavior long time ago.

-- 
Anthony PERARD

Re: [PATCH 3/3 v4] xenfb: Add [feature|request]-raw-pointer

[Anthony PERARD]

On Wed, Oct 11, 2017 at 01:19:25PM -0700, Stefano Stabellini wrote:
> On Wed, 11 Oct 2017, Anthony PERARD wrote:
> > The only observation I have is that on a Linux guest, when I have
> > usbdevice=tablet, with this series the pv mouse seems to become the
> > primary way of gueting mouse events (without, the tablet is primary).
> > So, on my VNC client instead of having both mouse in the guest and on my
> > desktop being at the same place, there is like a zoom of the mouse (the
> > zoom centered on the top-left corner). (That's better than relative
> > mouse event that we can get with the emulation.)
> 
> Thanks for testing. I am not completely sure about what should be the
> right behavior when both usbdevice=tablet and pvmouse are present.
> Typically, PV devices take precedence over emulated devices, so maybe
> it is OK that PV mouse is the primary device in this case.
> 
> But we would need to document this behavioral change in the commit
> descriptions.

Maybe something like "WARNING: pvmouse is fixed and now works!" :)

I think the change come from the fact that without the second patch, the
pv mouse doesn't work (or at least, I did not manage to make it work).

> The other question is whether the "zoom of the mouse" you are seeing is
> normal or whether we can "fix" it somehow. I guess it has always been
> the case for PV mouse? It is not something new, is it?

Yes, I think it always as been the case for PV mouse. I pretty sure I've
seen this behavior long time ago.

-- 
Anthony PERARD

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [Qemu-devel] [PATCH 0/3 v4] xenfb: Enablement for Windows PV HID frontend

[Gerd Hoffmann]

On Tue, 2017-09-26 at 14:43 +0000, Owen Smith wrote:
> Improve the input device model in xenfb, by updating the
> Qemu input handlers and adding a feature to allow for
> raw (unscaled) absolute coordinates to be represented.
> 
> By using a reverse mapping call, the Linux input.h #defines
> are not pulled into xenfb, and so should remove the compiler
> warnings reported.

Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>

What is the plan with this?  Merge through xen queue?  I can merge it
via ui queue too, but in that case I'd like to get an review from the
xen guys.

Note: conflicts with keycodemapdb patch series, might need a rebase
depending on merge order.

cheers,
  Gerd

Re: [PATCH 0/3 v4] xenfb: Enablement for Windows PV HID frontend

[Gerd Hoffmann]

On Tue, 2017-09-26 at 14:43 +0000, Owen Smith wrote:
> Improve the input device model in xenfb, by updating the
> Qemu input handlers and adding a feature to allow for
> raw (unscaled) absolute coordinates to be represented.
> 
> By using a reverse mapping call, the Linux input.h #defines
> are not pulled into xenfb, and so should remove the compiler
> warnings reported.

Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>

What is the plan with this?  Merge through xen queue?  I can merge it
via ui queue too, but in that case I'd like to get an review from the
xen guys.

Note: conflicts with keycodemapdb patch series, might need a rebase
depending on merge order.

cheers,
  Gerd


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [Qemu-devel] [PATCH 0/3 v4] xenfb: Enablement for Windows PV HID frontend

[Daniel P. Berrange]

On Fri, Sep 29, 2017 at 12:26:52PM +0200, Gerd Hoffmann wrote:
> On Tue, 2017-09-26 at 14:43 +0000, Owen Smith wrote:
> > Improve the input device model in xenfb, by updating the
> > Qemu input handlers and adding a feature to allow for
> > raw (unscaled) absolute coordinates to be represented.
> > 
> > By using a reverse mapping call, the Linux input.h #defines
> > are not pulled into xenfb, and so should remove the compiler
> > warnings reported.
> 
> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
> 
> What is the plan with this?  Merge through xen queue?  I can merge it
> via ui queue too, but in that case I'd like to get an review from the
> xen guys.
> 
> Note: conflicts with keycodemapdb patch series, might need a rebase
> depending on merge order.

I don't mind rebasing against this if it merges first.

Regards,
Daniel
-- 
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|

Re: [Qemu-devel] [PATCH 0/3 v4] xenfb: Enablement for Windows PV HID frontend

[Daniel P. Berrange]

On Fri, Sep 29, 2017 at 12:26:52PM +0200, Gerd Hoffmann wrote:
> On Tue, 2017-09-26 at 14:43 +0000, Owen Smith wrote:
> > Improve the input device model in xenfb, by updating the
> > Qemu input handlers and adding a feature to allow for
> > raw (unscaled) absolute coordinates to be represented.
> > 
> > By using a reverse mapping call, the Linux input.h #defines
> > are not pulled into xenfb, and so should remove the compiler
> > warnings reported.
> 
> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
> 
> What is the plan with this?  Merge through xen queue?  I can merge it
> via ui queue too, but in that case I'd like to get an review from the
> xen guys.
> 
> Note: conflicts with keycodemapdb patch series, might need a rebase
> depending on merge order.

I don't mind rebasing against this if it merges first.

Regards,
Daniel
-- 
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel