From: Russell King - ARM Linux <linux@armlinux.org.uk>
To: Stefan Chulski <stefanc@marvell.com>
Cc: "Marcin Wojtas" <mw@semihalf.com>,
"Thomas Petazzoni" <thomas.petazzoni@free-electrons.com>,
"Andrew Lunn" <andrew@lunn.ch>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Yan Markman" <ymarkman@marvell.com>,
"Jason Cooper" <jason@lakedaemon.net>,
netdev <netdev@vger.kernel.org>,
"Antoine Tenart" <antoine.tenart@free-electrons.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"kishon@ti.com" <kishon@ti.com>,
"Nadav Haklai" <nadavh@marvell.com>,
"Miquèl Raynal" <miquel.raynal@free-electrons.com>,
"Gregory Clément" <gregory.clement@free-electrons.com>,
"David S. Miller" <davem@davemloft.net>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>
Subject: Re: [EXT] Re: [PATCH net-next 5/6] arm64: dts: marvell: mcbin: enable the fourth network interface
Date: Mon, 1 Jan 2018 13:25:20 +0000 [thread overview]
Message-ID: <20180101132520.GB28752@n2100.armlinux.org.uk> (raw)
In-Reply-To: <616c2f3b0fe64184bc26d2de43442540@IL-EXCH01.marvell.com>
On Mon, Jan 01, 2018 at 10:35:25AM +0000, Stefan Chulski wrote:
>
> > -----Original Message-----
> > Hi Russell,
> >
> > Indeed. RGMII MAC behaves same way, although it shouldn't be named as 'in-
> > band' to be on par with the specifications. Anyway - this one is rather a stub for
> > being able to work with ACPI, so once the MDIO bus works there, this will be
> > out of any concerns.
>
> Hi Marcin,
>
> This is correct.
> "in-band" supported only for SGMII mode.
> IRQ link interrupt depend on "in-band"' auto negation only if "in-band"' enabled.
> But IRQ link interrupt could be triggered with "in-band", "out-band" or with specific fixed speed/duplex/flow_contol.
Hi Stefan,
How does this work in RGMII mode - is this handled by the PP2 polling
the PHY to get the speed, duplex and flow control settings?
Thanks.
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up
WARNING: multiple messages have this Message-ID (diff)
From: Russell King - ARM Linux <linux@armlinux.org.uk>
To: Stefan Chulski <stefanc@marvell.com>
Cc: "Thomas Petazzoni" <thomas.petazzoni@free-electrons.com>,
"Andrew Lunn" <andrew@lunn.ch>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Yan Markman" <ymarkman@marvell.com>,
"Jason Cooper" <jason@lakedaemon.net>,
netdev <netdev@vger.kernel.org>,
"Antoine Tenart" <antoine.tenart@free-electrons.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"kishon@ti.com" <kishon@ti.com>,
"Nadav Haklai" <nadavh@marvell.com>,
"Miquèl Raynal" <miquel.raynal@free-electrons.com>,
"Gregory Clément" <gregory.clement@free-electrons.com>,
"Marcin Wojtas" <mw@semihalf.com>,
"David S. Miller" <davem@davemloft.net>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>
Subject: Re: [EXT] Re: [PATCH net-next 5/6] arm64: dts: marvell: mcbin: enable the fourth network interface
Date: Mon, 1 Jan 2018 13:25:20 +0000 [thread overview]
Message-ID: <20180101132520.GB28752@n2100.armlinux.org.uk> (raw)
In-Reply-To: <616c2f3b0fe64184bc26d2de43442540@IL-EXCH01.marvell.com>
On Mon, Jan 01, 2018 at 10:35:25AM +0000, Stefan Chulski wrote:
>
> > -----Original Message-----
> > Hi Russell,
> >
> > Indeed. RGMII MAC behaves same way, although it shouldn't be named as 'in-
> > band' to be on par with the specifications. Anyway - this one is rather a stub for
> > being able to work with ACPI, so once the MDIO bus works there, this will be
> > out of any concerns.
>
> Hi Marcin,
>
> This is correct.
> "in-band" supported only for SGMII mode.
> IRQ link interrupt depend on "in-band"' auto negation only if "in-band"' enabled.
> But IRQ link interrupt could be triggered with "in-band", "out-band" or with specific fixed speed/duplex/flow_contol.
Hi Stefan,
How does this work in RGMII mode - is this handled by the PP2 polling
the PHY to get the speed, duplex and flow control settings?
Thanks.
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up
WARNING: multiple messages have this Message-ID (diff)
From: linux@armlinux.org.uk (Russell King - ARM Linux)
To: linux-arm-kernel@lists.infradead.org
Subject: [EXT] Re: [PATCH net-next 5/6] arm64: dts: marvell: mcbin: enable the fourth network interface
Date: Mon, 1 Jan 2018 13:25:20 +0000 [thread overview]
Message-ID: <20180101132520.GB28752@n2100.armlinux.org.uk> (raw)
In-Reply-To: <616c2f3b0fe64184bc26d2de43442540@IL-EXCH01.marvell.com>
On Mon, Jan 01, 2018 at 10:35:25AM +0000, Stefan Chulski wrote:
>
> > -----Original Message-----
> > Hi Russell,
> >
> > Indeed. RGMII MAC behaves same way, although it shouldn't be named as 'in-
> > band' to be on par with the specifications. Anyway - this one is rather a stub for
> > being able to work with ACPI, so once the MDIO bus works there, this will be
> > out of any concerns.
>
> Hi Marcin,
>
> This is correct.
> "in-band" supported only for SGMII mode.
> IRQ link interrupt depend on "in-band"' auto negation only if "in-band"' enabled.
> But IRQ link interrupt could be triggered with "in-band", "out-band" or with specific fixed speed/duplex/flow_contol.
Hi Stefan,
How does this work in RGMII mode - is this handled by the PP2 polling
the PHY to get the speed, duplex and flow control settings?
Thanks.
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up
next prev parent reply other threads:[~2018-01-01 13:25 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-27 22:14 [PATCH net-next 0/6] net: mvpp2: 1000BaseX and 2000BaseX support Antoine Tenart
2017-12-27 22:14 ` Antoine Tenart
2017-12-27 22:14 ` [PATCH net-next 1/6] phy: add 2.5G SGMII mode to the phy_mode enum Antoine Tenart
2017-12-27 22:14 ` Antoine Tenart
2017-12-28 7:20 ` Andrew Lunn
2017-12-28 7:20 ` Andrew Lunn
2017-12-28 10:06 ` Antoine Tenart
2017-12-28 10:06 ` Antoine Tenart
2017-12-28 14:16 ` Florian Fainelli
2017-12-28 14:16 ` Florian Fainelli
2017-12-28 18:24 ` Antoine Tenart
2017-12-28 18:24 ` Antoine Tenart
2018-01-03 14:35 ` Antoine Tenart
2018-01-03 14:35 ` Antoine Tenart
2018-01-03 15:08 ` Andrew Lunn
2018-01-03 15:08 ` Andrew Lunn
2018-01-03 17:29 ` Russell King - ARM Linux
2018-01-03 17:29 ` Russell King - ARM Linux
2017-12-27 22:14 ` [PATCH net-next 2/6] phy: cp110-comphy: 2.5G SGMII mode Antoine Tenart
2017-12-27 22:14 ` Antoine Tenart
2017-12-27 22:14 ` [PATCH net-next 3/6] net: mvpp2: 1000baseX support Antoine Tenart
2017-12-27 22:14 ` Antoine Tenart
2017-12-27 22:14 ` [PATCH net-next 4/6] net: mvpp2: 2500baseX support Antoine Tenart
2017-12-27 22:14 ` Antoine Tenart
2017-12-27 22:14 ` [PATCH net-next 5/6] arm64: dts: marvell: mcbin: enable the fourth network interface Antoine Tenart
2017-12-27 22:14 ` Antoine Tenart
2017-12-27 22:24 ` Russell King - ARM Linux
2017-12-27 22:24 ` Russell King - ARM Linux
2017-12-27 22:42 ` Antoine Tenart
2017-12-27 22:42 ` Antoine Tenart
2017-12-27 23:20 ` Russell King - ARM Linux
2017-12-27 23:20 ` Russell King - ARM Linux
2017-12-28 10:04 ` Antoine Tenart
2017-12-28 10:04 ` Antoine Tenart
2017-12-28 18:59 ` Russell King - ARM Linux
2017-12-28 18:59 ` Russell King - ARM Linux
2017-12-29 21:41 ` Antoine Tenart
2017-12-29 21:41 ` Antoine Tenart
2017-12-28 7:46 ` Andrew Lunn
2017-12-28 7:46 ` Andrew Lunn
2017-12-28 7:46 ` Andrew Lunn
2017-12-28 10:05 ` Antoine Tenart
2017-12-28 10:05 ` Antoine Tenart
2017-12-28 15:02 ` Florian Fainelli
2017-12-28 15:02 ` Florian Fainelli
2017-12-28 18:27 ` Antoine Tenart
2017-12-28 18:27 ` Antoine Tenart
2017-12-28 18:46 ` Russell King - ARM Linux
2017-12-28 18:46 ` Russell King - ARM Linux
2017-12-29 11:12 ` Marcin Wojtas
2017-12-29 11:12 ` Marcin Wojtas
2017-12-29 11:38 ` Russell King - ARM Linux
2017-12-29 11:38 ` Russell King - ARM Linux
2017-12-30 16:34 ` Marcin Wojtas
2017-12-30 16:34 ` Marcin Wojtas
2017-12-30 17:31 ` Russell King - ARM Linux
2017-12-30 17:31 ` Russell King - ARM Linux
2018-01-01 10:18 ` Marcin Wojtas
2018-01-01 10:18 ` Marcin Wojtas
2018-01-01 10:35 ` [EXT] " Stefan Chulski
2018-01-01 10:35 ` Stefan Chulski
2018-01-01 13:25 ` Russell King - ARM Linux [this message]
2018-01-01 13:25 ` Russell King - ARM Linux
2018-01-01 13:25 ` Russell King - ARM Linux
2018-01-03 17:00 ` Stefan Chulski
2018-01-03 17:00 ` Stefan Chulski
2018-01-03 17:00 ` Stefan Chulski
2018-01-03 17:54 ` Russell King - ARM Linux
2018-01-03 17:54 ` Russell King - ARM Linux
2018-01-03 17:54 ` Russell King - ARM Linux
2018-01-03 18:17 ` Marcin Wojtas
2018-01-03 18:17 ` Marcin Wojtas
2018-01-03 18:26 ` Stefan Chulski
2018-01-03 18:26 ` Stefan Chulski
2018-01-03 18:26 ` Stefan Chulski
2017-12-27 22:14 ` [PATCH net-next 6/6] arm64: dts: marvell: add Ethernet aliases Antoine Tenart
2017-12-27 22:14 ` Antoine Tenart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180101132520.GB28752@n2100.armlinux.org.uk \
--to=linux@armlinux.org.uk \
--cc=andrew@lunn.ch \
--cc=antoine.tenart@free-electrons.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=gregory.clement@free-electrons.com \
--cc=jason@lakedaemon.net \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=miquel.raynal@free-electrons.com \
--cc=mw@semihalf.com \
--cc=nadavh@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=stefanc@marvell.com \
--cc=thomas.petazzoni@free-electrons.com \
--cc=ymarkman@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.