[U-Boot] [PATCH 1/4] i2c: rcar_i2c: Remove the driver

[U-Boot] [PATCH 1/4] i2c: rcar_i2c: Remove the driver

[Marek Vasut]

Remove the rcar_i2c driver, since it's no longer used by any
board and will be superseded by a DM and DT capable variant.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
 drivers/i2c/Makefile   |   1 -
 drivers/i2c/rcar_i2c.c | 293 -------------------------------------------------
 2 files changed, 294 deletions(-)
 delete mode 100644 drivers/i2c/rcar_i2c.c

diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 169a2f1d7a..4a6e06fbc5 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -30,7 +30,6 @@ obj-$(CONFIG_SYS_I2C_MVTWSI) += mvtwsi.o
 obj-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o
 obj-$(CONFIG_SYS_I2C_MXS) += mxs_i2c.o
 obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o
-obj-$(CONFIG_SYS_I2C_RCAR) += rcar_i2c.o
 obj-$(CONFIG_SYS_I2C_RCAR_IIC) += rcar_iic.o
 obj-$(CONFIG_SYS_I2C_ROCKCHIP) += rk_i2c.o
 obj-$(CONFIG_SYS_I2C_S3C24X0) += s3c24x0_i2c.o exynos_hs_i2c.o
diff --git a/drivers/i2c/rcar_i2c.c b/drivers/i2c/rcar_i2c.c
deleted file mode 100644
index bfba443f62..0000000000
--- a/drivers/i2c/rcar_i2c.c
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * drivers/i2c/rcar_i2c.c
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- *
- * SPDX-License-Identifier: GPL-2.0
- *
- * NOTE: This driver should be converted to driver model before June 2017.
- * Please see doc/driver-model/i2c-howto.txt for instructions.
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct rcar_i2c {
-	u32 icscr;
-	u32 icmcr;
-	u32 icssr;
-	u32 icmsr;
-	u32 icsier;
-	u32 icmier;
-	u32 icccr;
-	u32 icsar;
-	u32 icmar;
-	u32 icrxdtxd;
-	u32 icccr2;
-	u32 icmpr;
-	u32 ichpr;
-	u32 iclpr;
-};
-
-#define MCR_MDBS	0x80	/* non-fifo mode switch	*/
-#define MCR_FSCL	0x40	/* override SCL pin	*/
-#define MCR_FSDA	0x20	/* override SDA pin	*/
-#define MCR_OBPC	0x10	/* override pins	*/
-#define MCR_MIE		0x08	/* master if enable	*/
-#define MCR_TSBE	0x04
-#define MCR_FSB		0x02	/* force stop bit	*/
-#define MCR_ESG		0x01	/* en startbit gen.	*/
-
-#define MSR_MASK	0x7f
-#define MSR_MNR		0x40	/* nack received	*/
-#define MSR_MAL		0x20	/* arbitration lost	*/
-#define MSR_MST		0x10	/* sent a stop		*/
-#define MSR_MDE		0x08
-#define MSR_MDT		0x04
-#define MSR_MDR		0x02
-#define MSR_MAT		0x01	/* slave addr xfer done	*/
-
-static const struct rcar_i2c *i2c_dev[CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS] = {
-	(struct rcar_i2c *)CONFIG_SYS_RCAR_I2C0_BASE,
-	(struct rcar_i2c *)CONFIG_SYS_RCAR_I2C1_BASE,
-	(struct rcar_i2c *)CONFIG_SYS_RCAR_I2C2_BASE,
-	(struct rcar_i2c *)CONFIG_SYS_RCAR_I2C3_BASE,
-};
-
-static void rcar_i2c_raw_rw_common(struct rcar_i2c *dev, u8 chip, uint addr)
-{
-	/* set slave address */
-	writel(chip << 1, &dev->icmar);
-	/* set register address */
-	writel(addr, &dev->icrxdtxd);
-	/* clear status */
-	writel(0, &dev->icmsr);
-	/* start master send */
-	writel(MCR_MDBS | MCR_MIE | MCR_ESG, &dev->icmcr);
-
-	while ((readl(&dev->icmsr) & (MSR_MAT | MSR_MDE))
-		!= (MSR_MAT | MSR_MDE))
-		udelay(10);
-
-	/* clear ESG */
-	writel(MCR_MDBS | MCR_MIE, &dev->icmcr);
-	/* start SCLclk */
-	writel(~(MSR_MAT | MSR_MDE), &dev->icmsr);
-
-	while (!(readl(&dev->icmsr) & MSR_MDE))
-		udelay(10);
-}
-
-static void rcar_i2c_raw_rw_finish(struct rcar_i2c *dev)
-{
-	while (!(readl(&dev->icmsr) & MSR_MST))
-		udelay(10);
-
-	writel(0, &dev->icmcr);
-}
-
-static int
-rcar_i2c_raw_write(struct rcar_i2c *dev, u8 chip, uint addr, u8 *val, int size)
-{
-	rcar_i2c_raw_rw_common(dev, chip, addr);
-
-	/* set send date */
-	writel(*val, &dev->icrxdtxd);
-	/* start SCLclk */
-	writel(~MSR_MDE, &dev->icmsr);
-
-	while (!(readl(&dev->icmsr) & MSR_MDE))
-		udelay(10);
-
-	/* set stop condition */
-	writel(MCR_MDBS | MCR_MIE | MCR_FSB, &dev->icmcr);
-	/* start SCLclk */
-	writel(~MSR_MDE, &dev->icmsr);
-
-	rcar_i2c_raw_rw_finish(dev);
-
-	return 0;
-}
-
-static u8
-rcar_i2c_raw_read(struct rcar_i2c *dev, u8 chip, uint addr)
-{
-	u8 ret;
-
-	rcar_i2c_raw_rw_common(dev, chip, addr);
-
-	/* set slave address, receive */
-	writel((chip << 1) | 1, &dev->icmar);
-	/* start master receive */
-	writel(MCR_MDBS | MCR_MIE | MCR_ESG, &dev->icmcr);
-	/* clear status */
-	writel(0, &dev->icmsr);
-
-	while ((readl(&dev->icmsr) & (MSR_MAT | MSR_MDR))
-		!= (MSR_MAT | MSR_MDR))
-		udelay(10);
-
-	/* clear ESG */
-	writel(MCR_MDBS | MCR_MIE, &dev->icmcr);
-	/* prepare stop condition */
-	writel(MCR_MDBS | MCR_MIE | MCR_FSB, &dev->icmcr);
-	/* start SCLclk */
-	writel(~(MSR_MAT | MSR_MDR), &dev->icmsr);
-
-	while (!(readl(&dev->icmsr) & MSR_MDR))
-		udelay(10);
-
-	/* get receive data */
-	ret = (u8)readl(&dev->icrxdtxd);
-	/* start SCLclk */
-	writel(~MSR_MDR, &dev->icmsr);
-
-	rcar_i2c_raw_rw_finish(dev);
-
-	return ret;
-}
-
-/*
- * SCL  = iicck / (20 + SCGD * 8 + F[(ticf + tr + intd) * iicck])
- * iicck  : I2C internal clock < 20 MHz
- * ticf : I2C SCL falling time: 35 ns
- * tr   : I2C SCL rising time:  200 ns
- * intd : LSI internal delay:   I2C0: 50 ns I2C1-3: 5
- * F[n] : n rounded up to an integer
- */
-static u32 rcar_clock_gen(int i2c_no, u32 bus_speed)
-{
-	u32 iicck, f, scl, scgd;
-	u32 intd = 5;
-
-	int bit = 0, cdf_width = 3;
-	for (bit = 0; bit < (1 << cdf_width); bit++) {
-		iicck = CONFIG_HP_CLK_FREQ / (1 + bit);
-		if (iicck < 20000000)
-			break;
-	}
-
-	if (bit > (1 << cdf_width)) {
-		puts("rcar-i2c: Can not get CDF\n");
-		return 0;
-	}
-
-	if (i2c_no == 0)
-		intd = 50;
-
-	f = (35 + 200 + intd) * (iicck / 1000000000);
-
-	for (scgd = 0; scgd < 0x40; scgd++) {
-		scl = iicck / (20 + (scgd * 8) + f);
-		if (scl <= bus_speed)
-			break;
-	}
-
-	if (scgd > 0x40) {
-		puts("rcar-i2c: Can not get SDGB\n");
-		return 0;
-	}
-
-	debug("%s: scl: %d\n", __func__, scl);
-	debug("%s: bit %x\n", __func__, bit);
-	debug("%s: scgd %x\n", __func__, scgd);
-	debug("%s: iccr %x\n", __func__, (scgd << (cdf_width) | bit));
-
-	return scgd << (cdf_width) | bit;
-}
-
-static void
-rcar_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
-{
-	struct rcar_i2c *dev = (struct rcar_i2c *)i2c_dev[adap->hwadapnr];
-	u32 icccr = 0;
-
-	/* No i2c support prior to relocation */
-	if (!(gd->flags & GD_FLG_RELOC))
-		return;
-
-	/*
-	 * reset slave mode.
-	 * slave mode is not used on this driver
-	 */
-	writel(0, &dev->icsier);
-	writel(0, &dev->icsar);
-	writel(0, &dev->icscr);
-	writel(0, &dev->icssr);
-
-	/* reset master mode */
-	writel(0, &dev->icmier);
-	writel(0, &dev->icmcr);
-	writel(0, &dev->icmsr);
-	writel(0, &dev->icmar);
-
-	icccr = rcar_clock_gen(adap->hwadapnr, adap->speed);
-	if (icccr == 0)
-		puts("I2C: Init failed\n");
-	else
-		writel(icccr, &dev->icccr);
-}
-
-static int rcar_i2c_read(struct i2c_adapter *adap, uint8_t chip,
-			uint addr, int alen, u8 *data, int len)
-{
-	struct rcar_i2c *dev = (struct rcar_i2c *)i2c_dev[adap->hwadapnr];
-	int i;
-
-	for (i = 0; i < len; i++)
-		data[i] = rcar_i2c_raw_read(dev, chip, addr + i);
-
-	return 0;
-}
-
-static int rcar_i2c_write(struct i2c_adapter *adap, uint8_t chip, uint addr,
-			int alen, u8 *data, int len)
-{
-	struct rcar_i2c *dev = (struct rcar_i2c *)i2c_dev[adap->hwadapnr];
-	return rcar_i2c_raw_write(dev, chip, addr, data, len);
-}
-
-static int
-rcar_i2c_probe(struct i2c_adapter *adap, u8 dev)
-{
-	return rcar_i2c_read(adap, dev, 0, 0, NULL, 0);
-}
-
-static unsigned int rcar_i2c_set_bus_speed(struct i2c_adapter *adap,
-			unsigned int speed)
-{
-	struct rcar_i2c *dev = (struct rcar_i2c *)i2c_dev[adap->hwadapnr];
-	u32 icccr;
-	int ret = 0;
-
-	rcar_i2c_raw_rw_finish(dev);
-
-	icccr = rcar_clock_gen(adap->hwadapnr, speed);
-	if (icccr == 0) {
-		puts("I2C: Init failed\n");
-		ret = -1;
-	} else {
-		writel(icccr, &dev->icccr);
-	}
-	return ret;
-}
-
-/*
- * Register RCAR i2c adapters
- */
-U_BOOT_I2C_ADAP_COMPLETE(rcar_0, rcar_i2c_init, rcar_i2c_probe, rcar_i2c_read,
-			 rcar_i2c_write, rcar_i2c_set_bus_speed,
-			 CONFIG_SYS_RCAR_I2C0_SPEED, 0, 0)
-U_BOOT_I2C_ADAP_COMPLETE(rcar_1, rcar_i2c_init, rcar_i2c_probe, rcar_i2c_read,
-			 rcar_i2c_write, rcar_i2c_set_bus_speed,
-			 CONFIG_SYS_RCAR_I2C1_SPEED, 0, 1)
-U_BOOT_I2C_ADAP_COMPLETE(rcar_2, rcar_i2c_init, rcar_i2c_probe, rcar_i2c_read,
-			 rcar_i2c_write, rcar_i2c_set_bus_speed,
-			 CONFIG_SYS_RCAR_I2C2_SPEED, 0, 2)
-U_BOOT_I2C_ADAP_COMPLETE(rcar_3, rcar_i2c_init, rcar_i2c_probe, rcar_i2c_read,
-			 rcar_i2c_write, rcar_i2c_set_bus_speed,
-			 CONFIG_SYS_RCAR_I2C3_SPEED, 0, 3)
-- 
2.16.2

[U-Boot] [PATCH 2/4] i2c: rcar_i2c: Add DM and DT capable I2C driver

[Marek Vasut]

Add derivative of the rcar_i2c driver which is capable of
probing itself from DM and uses DT.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
 drivers/i2c/Kconfig    |   6 +
 drivers/i2c/Makefile   |   1 +
 drivers/i2c/rcar_i2c.c | 355 +++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 362 insertions(+)
 create mode 100644 drivers/i2c/rcar_i2c.c

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 7fb201d8e6..5eceab9ea8 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -339,6 +339,12 @@ config SYS_OMAP24_I2C_SPEED
 	  OMAP24xx Slave speed channel 0
 endif
 
+config SYS_I2C_RCAR_I2C
+	bool "Renesas RCar I2C driver"
+	depends on (RCAR_GEN3 || RCAR_GEN2) && DM_I2C
+	help
+	  Support for Renesas RCar I2C controller.
+
 config SYS_I2C_RCAR_IIC
 	bool "Renesas RCar Gen3 IIC driver"
 	depends on (RCAR_GEN3 || RCAR_GEN2) && DM_I2C
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 4a6e06fbc5..4e9f233cda 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_SYS_I2C_MVTWSI) += mvtwsi.o
 obj-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o
 obj-$(CONFIG_SYS_I2C_MXS) += mxs_i2c.o
 obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o
+obj-$(CONFIG_SYS_I2C_RCAR_I2C) += rcar_i2c.o
 obj-$(CONFIG_SYS_I2C_RCAR_IIC) += rcar_iic.o
 obj-$(CONFIG_SYS_I2C_ROCKCHIP) += rk_i2c.o
 obj-$(CONFIG_SYS_I2C_S3C24X0) += s3c24x0_i2c.o exynos_hs_i2c.o
diff --git a/drivers/i2c/rcar_i2c.c b/drivers/i2c/rcar_i2c.c
new file mode 100644
index 0000000000..6010ccde61
--- /dev/null
+++ b/drivers/i2c/rcar_i2c.c
@@ -0,0 +1,355 @@
+/*
+ * drivers/i2c/rcar_i2c.c
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Clock configuration based on Linux i2c-rcar.c:
+ * Copyright (C) 2014-15 Wolfram Sang <wsa@sang-engineering.com>
+ * Copyright (C) 2011-2015 Renesas Electronics Corporation
+ * Copyright (C) 2012-14 Renesas Solutions Corp.
+ *   Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <wait_bit.h>
+
+#define RCAR_I2C_ICSCR			0x00
+#define RCAR_I2C_ICMCR			0x04
+#define RCAR_I2C_ICMCR_MDBS		BIT(7)
+#define RCAR_I2C_ICMCR_FSCL		BIT(6)
+#define RCAR_I2C_ICMCR_FSDA		BIT(5)
+#define RCAR_I2C_ICMCR_OBPC		BIT(4)
+#define RCAR_I2C_ICMCR_MIE		BIT(3)
+#define RCAR_I2C_ICMCR_TSBE		BIT(2)
+#define RCAR_I2C_ICMCR_FSB		BIT(1)
+#define RCAR_I2C_ICMCR_ESG		BIT(0)
+#define RCAR_I2C_ICSSR			0x08
+#define RCAR_I2C_ICMSR			0x0c
+#define RCAR_I2C_ICMSR_MASK		0x7f
+#define RCAR_I2C_ICMSR_MNR		BIT(6)
+#define RCAR_I2C_ICMSR_MAL		BIT(5)
+#define RCAR_I2C_ICMSR_MST		BIT(4)
+#define RCAR_I2C_ICMSR_MDE		BIT(3)
+#define RCAR_I2C_ICMSR_MDT		BIT(2)
+#define RCAR_I2C_ICMSR_MDR		BIT(1)
+#define RCAR_I2C_ICMSR_MAT		BIT(0)
+#define RCAR_I2C_ICSIER			0x10
+#define RCAR_I2C_ICMIER			0x14
+#define RCAR_I2C_ICCCR			0x18
+#define RCAR_I2C_ICCCR_SCGD_OFF		3
+#define RCAR_I2C_ICSAR			0x1c
+#define RCAR_I2C_ICMAR			0x20
+#define RCAR_I2C_ICRXD_ICTXD		0x24
+
+struct rcar_i2c_priv {
+	void __iomem		*base;
+	struct clk		clk;
+	u32			intdelay;
+	u32			icccr;
+};
+
+static int rcar_i2c_finish(struct udevice *dev)
+{
+	struct rcar_i2c_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	ret = wait_for_bit_le32(priv->base + RCAR_I2C_ICMSR, RCAR_I2C_ICMSR_MST,
+				true, 10, true);
+
+	writel(0, priv->base + RCAR_I2C_ICSSR);
+	writel(0, priv->base + RCAR_I2C_ICMSR);
+	writel(0, priv->base + RCAR_I2C_ICMCR);
+
+	return ret;
+}
+
+static void rcar_i2c_recover(struct udevice *dev)
+{
+	struct rcar_i2c_priv *priv = dev_get_priv(dev);
+	u32 mcr = RCAR_I2C_ICMCR_MDBS | RCAR_I2C_ICMCR_OBPC;
+	u32 mcra = mcr | RCAR_I2C_ICMCR_FSDA;
+	int i;
+
+	/* Send 9 SCL pulses */
+	for (i = 0; i < 9; i++) {
+		writel(mcra | RCAR_I2C_ICMCR_FSCL, priv->base + RCAR_I2C_ICMCR);
+		udelay(5);
+		writel(mcra, priv->base + RCAR_I2C_ICMCR);
+		udelay(5);
+	}
+
+	/* Send stop condition */
+	udelay(5);
+	writel(mcra, priv->base + RCAR_I2C_ICMCR);
+	udelay(5);
+	writel(mcr, priv->base + RCAR_I2C_ICMCR);
+	udelay(5);
+	writel(mcr | RCAR_I2C_ICMCR_FSCL, priv->base + RCAR_I2C_ICMCR);
+	udelay(5);
+	writel(mcra | RCAR_I2C_ICMCR_FSCL, priv->base + RCAR_I2C_ICMCR);
+	udelay(5);
+}
+
+static int rcar_i2c_set_addr(struct udevice *dev, u8 chip, u8 read)
+{
+	struct rcar_i2c_priv *priv = dev_get_priv(dev);
+	u32 mask = RCAR_I2C_ICMSR_MAT |
+		   (read ? RCAR_I2C_ICMSR_MDR : RCAR_I2C_ICMSR_MDE);
+	u32 val;
+	int ret;
+
+	writel(0, priv->base + RCAR_I2C_ICMIER);
+	writel(RCAR_I2C_ICMCR_MDBS, priv->base + RCAR_I2C_ICMCR);
+	writel(0, priv->base + RCAR_I2C_ICMSR);
+	writel(priv->icccr, priv->base + RCAR_I2C_ICCCR);
+
+	ret = wait_for_bit_le32(priv->base + RCAR_I2C_ICMCR,
+				RCAR_I2C_ICMCR_FSDA, false, 2, true);
+	if (ret) {
+		rcar_i2c_recover(dev);
+		val = readl(priv->base + RCAR_I2C_ICMSR);
+		if (val & RCAR_I2C_ICMCR_FSDA) {
+			dev_err(dev, "Bus busy, aborting\n");
+			return ret;
+		}
+	}
+
+	writel((chip << 1) | read, priv->base + RCAR_I2C_ICMAR);
+	writel(0, priv->base + RCAR_I2C_ICMSR);
+	writel(RCAR_I2C_ICMCR_MDBS | RCAR_I2C_ICMCR_MIE | RCAR_I2C_ICMCR_ESG,
+	       priv->base + RCAR_I2C_ICMCR);
+
+	ret = wait_for_bit_le32(priv->base + RCAR_I2C_ICMSR, mask,
+				true, 100, true);
+	if (ret)
+		return ret;
+
+	/* Check NAK */
+	if (readl(priv->base + RCAR_I2C_ICMSR) & RCAR_I2C_ICMSR_MNR)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int rcar_i2c_read_common(struct udevice *dev, struct i2c_msg *msg)
+{
+	struct rcar_i2c_priv *priv = dev_get_priv(dev);
+	u32 icmcr = RCAR_I2C_ICMCR_MDBS | RCAR_I2C_ICMCR_MIE;
+	int i, ret = -EREMOTEIO;
+
+	ret = rcar_i2c_set_addr(dev, msg->addr, 1);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < msg->len; i++) {
+
+		if (msg->len - 1 == i)
+			icmcr |= RCAR_I2C_ICMCR_FSB;
+
+		writel(icmcr, priv->base + RCAR_I2C_ICMCR);
+		writel(~RCAR_I2C_ICMSR_MDR, priv->base + RCAR_I2C_ICMSR);
+
+		ret = wait_for_bit_le32(priv->base + RCAR_I2C_ICMSR,
+					RCAR_I2C_ICMSR_MDR, true, 100, true);
+		if (ret)
+			return ret;
+
+		msg->buf[i] = readl(priv->base + RCAR_I2C_ICRXD_ICTXD) & 0xff;
+	}
+
+	writel(~RCAR_I2C_ICMSR_MDR, priv->base + RCAR_I2C_ICMSR);
+
+	return rcar_i2c_finish(dev);
+}
+
+static int rcar_i2c_write_common(struct udevice *dev, struct i2c_msg *msg)
+{
+	struct rcar_i2c_priv *priv = dev_get_priv(dev);
+	u32 icmcr = RCAR_I2C_ICMCR_MDBS | RCAR_I2C_ICMCR_MIE;
+	int i, ret = -EREMOTEIO;
+
+	ret = rcar_i2c_set_addr(dev, msg->addr, 0);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < msg->len; i++) {
+		writel(msg->buf[i], priv->base + RCAR_I2C_ICRXD_ICTXD);
+		writel(icmcr, priv->base + RCAR_I2C_ICMCR);
+		writel(~RCAR_I2C_ICMSR_MDE, priv->base + RCAR_I2C_ICMSR);
+
+		ret = wait_for_bit_le32(priv->base + RCAR_I2C_ICMSR,
+					RCAR_I2C_ICMSR_MDE, true, 100, true);
+		if (ret)
+			return ret;
+	}
+
+	writel(~RCAR_I2C_ICMSR_MDE, priv->base + RCAR_I2C_ICMSR);
+	icmcr |= RCAR_I2C_ICMCR_FSB;
+	writel(icmcr, priv->base + RCAR_I2C_ICMCR);
+
+	return rcar_i2c_finish(dev);
+}
+
+static int rcar_i2c_xfer(struct udevice *dev, struct i2c_msg *msg, int nmsgs)
+{
+	int ret;
+
+	for (; nmsgs > 0; nmsgs--, msg++) {
+		if (msg->flags & I2C_M_RD)
+			ret = rcar_i2c_read_common(dev, msg);
+		else
+			ret = rcar_i2c_write_common(dev, msg);
+
+		if (ret)
+			return -EREMOTEIO;
+	}
+
+	return ret;
+}
+
+static int rcar_i2c_probe_chip(struct udevice *dev, uint addr, uint flags)
+{
+	struct rcar_i2c_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	/* Ignore address 0, slave address */
+	if (addr == 0)
+		return -EINVAL;
+
+	ret = rcar_i2c_set_addr(dev, addr, 1);
+	writel(0, priv->base + RCAR_I2C_ICMSR);
+	return ret;
+}
+
+static int rcar_i2c_set_speed(struct udevice *dev, uint bus_freq_hz)
+{
+	struct rcar_i2c_priv *priv = dev_get_priv(dev);
+	u32 scgd, cdf, round, ick, sum, scl;
+	unsigned long rate;
+
+	/*
+	 * calculate SCL clock
+	 * see
+	 *	ICCCR
+	 *
+	 * ick	= clkp / (1 + CDF)
+	 * SCL	= ick / (20 + SCGD * 8 + F[(ticf + tr + intd) * ick])
+	 *
+	 * ick  : I2C internal clock < 20 MHz
+	 * ticf : I2C SCL falling time
+	 * tr   : I2C SCL rising  time
+	 * intd : LSI internal delay
+	 * clkp : peripheral_clk
+	 * F[]  : integer up-valuation
+	 */
+	rate = clk_get_rate(&priv->clk);
+	cdf = rate / 20000000;
+	if (cdf >= 8) {
+		dev_err(dev, "Input clock %lu too high\n", rate);
+		return -EIO;
+	}
+	ick = rate / (cdf + 1);
+
+	/*
+	 * it is impossible to calculate large scale
+	 * number on u32. separate it
+	 *
+	 * F[(ticf + tr + intd) * ick] with sum = (ticf + tr + intd)
+	 *  = F[sum * ick / 1000000000]
+	 *  = F[(ick / 1000000) * sum / 1000]
+	 */
+	sum = 35 + 200 + priv->intdelay;
+	round = (ick + 500000) / 1000000 * sum;
+	round = (round + 500) / 1000;
+
+	/*
+	 * SCL	= ick / (20 + SCGD * 8 + F[(ticf + tr + intd) * ick])
+	 *
+	 * Calculation result (= SCL) should be less than
+	 * bus_speed for hardware safety
+	 *
+	 * We could use something along the lines of
+	 *	div = ick / (bus_speed + 1) + 1;
+	 *	scgd = (div - 20 - round + 7) / 8;
+	 *	scl = ick / (20 + (scgd * 8) + round);
+	 * (not fully verified) but that would get pretty involved
+	 */
+	for (scgd = 0; scgd < 0x40; scgd++) {
+		scl = ick / (20 + (scgd * 8) + round);
+		if (scl <= bus_freq_hz)
+			goto scgd_find;
+	}
+	dev_err(dev, "it is impossible to calculate best SCL\n");
+	return -EIO;
+
+scgd_find:
+	dev_dbg(dev, "clk %d/%d(%lu), round %u, CDF:0x%x, SCGD: 0x%x\n",
+		scl, bus_freq_hz, clk_get_rate(&priv->clk), round, cdf, scgd);
+
+	priv->icccr = (scgd << RCAR_I2C_ICCCR_SCGD_OFF) | cdf;
+	writel(priv->icccr, priv->base + RCAR_I2C_ICCCR);
+
+	return 0;
+}
+
+static int rcar_i2c_probe(struct udevice *dev)
+{
+	struct rcar_i2c_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	priv->base = dev_read_addr_ptr(dev);
+	priv->intdelay = dev_read_u32_default(dev,
+					      "i2c-scl-internal-delay-ns", 5);
+
+	ret = clk_get_by_index(dev, 0, &priv->clk);
+	if (ret)
+		return ret;
+
+	ret = clk_enable(&priv->clk);
+	if (ret)
+		return ret;
+
+	/* reset slave mode */
+	writel(0, priv->base + RCAR_I2C_ICSIER);
+	writel(0, priv->base + RCAR_I2C_ICSAR);
+	writel(0, priv->base + RCAR_I2C_ICSCR);
+	writel(0, priv->base + RCAR_I2C_ICSSR);
+
+	/* reset master mode */
+	writel(0, priv->base + RCAR_I2C_ICMIER);
+	writel(0, priv->base + RCAR_I2C_ICMCR);
+	writel(0, priv->base + RCAR_I2C_ICMSR);
+	writel(0, priv->base + RCAR_I2C_ICMAR);
+
+	ret = rcar_i2c_set_speed(dev, 100000);
+	if (ret)
+		clk_disable(&priv->clk);
+
+	return ret;
+}
+
+static const struct dm_i2c_ops rcar_i2c_ops = {
+	.xfer		= rcar_i2c_xfer,
+	.probe_chip	= rcar_i2c_probe_chip,
+	.set_bus_speed	= rcar_i2c_set_speed,
+};
+
+static const struct udevice_id rcar_i2c_ids[] = {
+	{ .compatible = "renesas,rcar-gen2-i2c" },
+	{ }
+};
+
+U_BOOT_DRIVER(i2c_rcar) = {
+	.name		= "i2c_rcar",
+	.id		= UCLASS_I2C,
+	.of_match	= rcar_i2c_ids,
+	.probe		= rcar_i2c_probe,
+	.priv_auto_alloc_size = sizeof(struct rcar_i2c_priv),
+	.ops		= &rcar_i2c_ops,
+};
-- 
2.16.2

[U-Boot] [PATCH 2/4] i2c: rcar_i2c: Add DM and DT capable I2C driver

[Heiko Schocher]

Hello Marek,

Am 01.05.2018 um 09:03 schrieb Marek Vasut:
> Add derivative of the rcar_i2c driver which is capable of
> probing itself from DM and uses DT.
> 
> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> Cc: Heiko Schocher <hs@denx.de>
> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
> ---
>   drivers/i2c/Kconfig    |   6 +
>   drivers/i2c/Makefile   |   1 +
>   drivers/i2c/rcar_i2c.c | 355 +++++++++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 362 insertions(+)
>   create mode 100644 drivers/i2c/rcar_i2c.c

I fixed patch 1/4 and tried to apply this patch, but checkpatch says:

--2018-05-10 09:16:48--  http://patchwork.ozlabs.org/patch/906952/mbox
Auflösen des Hostnamens patchwork.ozlabs.org (patchwork.ozlabs.org)… 203.11.71.1, 2401:3900:2:1::2
Verbindungsaufbau zu patchwork.ozlabs.org (patchwork.ozlabs.org)|203.11.71.1|:80 … verbunden.
HTTP-Anforderung gesendet, auf Antwort wird gewartet … 301 Moved Permanently
Platz: /patch/906952/mbox/ [folgend]
--2018-05-10 09:16:49--  http://patchwork.ozlabs.org/patch/906952/mbox/
Wiederverwendung der bestehenden Verbindung zu patchwork.ozlabs.org:80.
HTTP-Anforderung gesendet, auf Antwort wird gewartet … 200 OK
Länge: nicht spezifiziert [text/plain]
Wird in »mbox« gespeichert.

mbox                                          [ <=> 
                                 ]  11,38K  --.-KB/s    in 0,01s

2018-05-10 09:16:50 (933 KB/s) - »mbox« gespeichert [11653]

WARNING: please write a paragraph that describes the config symbol fully
#37: FILE: drivers/i2c/Kconfig:342:
+config SYS_I2C_RCAR_I2C

WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#59:
new file mode 100644

WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
#64: FILE: drivers/i2c/rcar_i2c.c:1:
+/*

CHECK: Blank lines aren't necessary after an open brace '{'
#214: FILE: drivers/i2c/rcar_i2c.c:151:
+       for (i = 0; i < msg->len; i++) {
+

total: 0 errors, 3 warnings, 1 checks, 374 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
       mechanically convert to the typical style using --fix or --fix-inplace.

mbox has style problems, please review.

NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE 
NETWORKING_BLOCK_COMMENT_STYLE PREFER_ETHER_ADDR_COPY USLEEP_RANGE

NOTE: If any of the errors are false positives, please report
       them to the maintainer, see CHECKPATCH in MAINTAINERS.
Wende an: i2c: rcar_i2c: Add DM and DT capable I2C driver

Coukd you please send a rebased version of the patchset?

Thanks!

Beside of this, you can add my to patch 1 and 2:

Reviewed-by: Heiko Schocher <hs@denx.de>

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de

[U-Boot] [PATCH 3/4] ARM: rmobile: Enable DM capable RCar I2C driver on Lager

[Marek Vasut]

Enable the DM capable driver instead of the legacy one.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
 configs/lager_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/lager_defconfig b/configs/lager_defconfig
index 1071da24d2..7dcd9b7dd8 100644
--- a/configs/lager_defconfig
+++ b/configs/lager_defconfig
@@ -53,6 +53,7 @@ CONFIG_CLK_RENESAS=y
 CONFIG_DM_GPIO=y
 CONFIG_RCAR_GPIO=y
 CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_RCAR_I2C=y
 CONFIG_SYS_I2C_RCAR_IIC=y
 CONFIG_DM_MMC=y
 CONFIG_SH_MMCIF=y
-- 
2.16.2

[U-Boot] [PATCH 3/4] ARM: rmobile: Enable DM capable RCar I2C driver on Lager

[Heiko Schocher]

Hello Marek,

Am 01.05.2018 um 09:03 schrieb Marek Vasut:
> Enable the DM capable driver instead of the legacy one.
> 
> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
> ---
>   configs/lager_defconfig | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/configs/lager_defconfig b/configs/lager_defconfig
> index 1071da24d2..7dcd9b7dd8 100644
> --- a/configs/lager_defconfig
> +++ b/configs/lager_defconfig
> @@ -53,6 +53,7 @@ CONFIG_CLK_RENESAS=y
>   CONFIG_DM_GPIO=y
>   CONFIG_RCAR_GPIO=y
>   CONFIG_DM_I2C=y
> +CONFIG_SYS_I2C_RCAR_I2C=y
>   CONFIG_SYS_I2C_RCAR_IIC=y

Isn;t CONFIG_SYS_I2C_RCAR_IIC also a i2c driver?

Has this SoC 2 different i2c drivers?

If so, you can add my

Reviewed-by: Heiko Schocher <hs@denx.de>

(Also to patch 4)

>   CONFIG_DM_MMC=y
>   CONFIG_SH_MMCIF=y
> 

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de

[U-Boot] [PATCH 3/4] ARM: rmobile: Enable DM capable RCar I2C driver on Lager

[Marek Vasut]

On 05/10/2018 09:23 AM, Heiko Schocher wrote:
> Hello Marek,

Hi,

> Am 01.05.2018 um 09:03 schrieb Marek Vasut:
>> Enable the DM capable driver instead of the legacy one.
>>
>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
>> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
>> ---
>>   configs/lager_defconfig | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/configs/lager_defconfig b/configs/lager_defconfig
>> index 1071da24d2..7dcd9b7dd8 100644
>> --- a/configs/lager_defconfig
>> +++ b/configs/lager_defconfig
>> @@ -53,6 +53,7 @@ CONFIG_CLK_RENESAS=y
>>   CONFIG_DM_GPIO=y
>>   CONFIG_RCAR_GPIO=y
>>   CONFIG_DM_I2C=y
>> +CONFIG_SYS_I2C_RCAR_I2C=y
>>   CONFIG_SYS_I2C_RCAR_IIC=y
> 
> Isn;t CONFIG_SYS_I2C_RCAR_IIC also a i2c driver?
> 
> Has this SoC 2 different i2c drivers?

Yes :)

> If so, you can add my
> 
> Reviewed-by: Heiko Schocher <hs@denx.de>
> 
> (Also to patch 4)
> 
>>   CONFIG_DM_MMC=y
>>   CONFIG_SH_MMCIF=y
>>
> 
> bye,
> Heiko


-- 
Best regards,
Marek Vasut

[U-Boot] [PATCH 4/4] ARM: rmobile: Enable DM capable RCar I2C driver on Silk

[Marek Vasut]

Enable the DM capable driver instead of the legacy one.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
 configs/silk_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/silk_defconfig b/configs/silk_defconfig
index 4cb1179a68..70c5219502 100644
--- a/configs/silk_defconfig
+++ b/configs/silk_defconfig
@@ -53,6 +53,7 @@ CONFIG_CLK_RENESAS=y
 CONFIG_DM_GPIO=y
 CONFIG_RCAR_GPIO=y
 CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_RCAR_I2C=y
 CONFIG_SYS_I2C_RCAR_IIC=y
 CONFIG_DM_MMC=y
 CONFIG_SH_MMCIF=y
-- 
2.16.2

[U-Boot] [PATCH 1/4] i2c: rcar_i2c: Remove the driver

[Heiko Schocher]

Hello Marek,

Am 01.05.2018 um 09:03 schrieb Marek Vasut:
> Remove the rcar_i2c driver, since it's no longer used by any
> board and will be superseded by a DM and DT capable variant.
> 
> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> Cc: Heiko Schocher <hs@denx.de>
> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
> ---
>   drivers/i2c/Makefile   |   1 -
>   drivers/i2c/rcar_i2c.c | 293 -------------------------------------------------
>   2 files changed, 294 deletions(-)
>   delete mode 100644 drivers/i2c/rcar_i2c.c

checkpatch says:

2018-05-08 03:12:02,870:CON    :tbotlib   # tb_ctrl: ^[[33mWARNING:^[[0m added, moved or deleted 
file(s), does MAINTAINERS need updating?
#41:
deleted file mode 100644

total: 0 errors, 1 warnings, 0 checks, 7 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
       mechanically convert to the typical style using --fix or --fix-inplace.

mbox has style problems, please review.

And applying patch to current mainline fails:

2018-05-08 03:12:04,014:CON    :tbotlib   # tb_ctrl: git am -3 mbox
2018-05-08 03:12:04,156:CON    :tbotlib   # tb_ctrl: Applying: i2c: rcar_i2c: Remove the driver
Using index info to reconstruct a base tree...
M	drivers/i2c/Makefile
M	drivers/i2c/rcar_i2c.c
Falling back to patching base and 3-way merge...
CONFLICT (modify/delete): drivers/i2c/rcar_i2c.c deleted in i2c: rcar_i2c: Remove the driver and 
modified in HEAD. Version HEAD of drivers/i2c/rcar_i2c.c left in tree.
Auto-merging drivers/i2c/Makefile
error: Failed to merge in the changes.
Patch failed at 0001 i2c: rcar_i2c: Remove the driver
The copy of the patch that failed is found in: .git/rebase-apply/patch
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
hs at pollux [ 5:12:04] ttbott>

see full log:
http://xeidos.ddns.net/tbot/id_740/tbot.txt

Before I make a dummy mistake, can you please rebase your patchset?

Thanks!

Hmm.. why do you remove the driver in this patch, and add it again
in patch 2 ?

Isn;t it better to squash this 2 patches into one, so we see your
changes?

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de

[U-Boot] [PATCH 1/4] i2c: rcar_i2c: Remove the driver

[Marek Vasut]

On 05/08/2018 10:14 AM, Heiko Schocher wrote:
> Hello Marek,
> 
> Am 01.05.2018 um 09:03 schrieb Marek Vasut:
>> Remove the rcar_i2c driver, since it's no longer used by any
>> board and will be superseded by a DM and DT capable variant.
>>
>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
>> Cc: Heiko Schocher <hs@denx.de>
>> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
>> ---
>>   drivers/i2c/Makefile   |   1 -
>>   drivers/i2c/rcar_i2c.c | 293
>> -------------------------------------------------
>>   2 files changed, 294 deletions(-)
>>   delete mode 100644 drivers/i2c/rcar_i2c.c
> 
> checkpatch says:
> 
> 2018-05-08 03:12:02,870:CON    :tbotlib   # tb_ctrl: ^[[33mWARNING:^[[0m
> added, moved or deleted file(s), does MAINTAINERS need updating?
> #41:
> deleted file mode 100644
> 
> total: 0 errors, 1 warnings, 0 checks, 7 lines checked
> 
> NOTE: For some of the reported defects, checkpatch may be able to
>       mechanically convert to the typical style using --fix or
> --fix-inplace.
> 
> mbox has style problems, please review.
> 
> And applying patch to current mainline fails:
> 
> 2018-05-08 03:12:04,014:CON    :tbotlib   # tb_ctrl: git am -3 mbox
> 2018-05-08 03:12:04,156:CON    :tbotlib   # tb_ctrl: Applying: i2c:
> rcar_i2c: Remove the driver
> Using index info to reconstruct a base tree...
> M    drivers/i2c/Makefile
> M    drivers/i2c/rcar_i2c.c
> Falling back to patching base and 3-way merge...
> CONFLICT (modify/delete): drivers/i2c/rcar_i2c.c deleted in i2c:
> rcar_i2c: Remove the driver and modified in HEAD. Version HEAD of
> drivers/i2c/rcar_i2c.c left in tree.
> Auto-merging drivers/i2c/Makefile
> error: Failed to merge in the changes.
> Patch failed at 0001 i2c: rcar_i2c: Remove the driver
> The copy of the patch that failed is found in: .git/rebase-apply/patch
> When you have resolved this problem, run "git am --continue".
> If you prefer to skip this patch, run "git am --skip" instead.
> To restore the original branch and stop patching, run "git am --abort".
> hs at pollux [ 5:12:04] ttbott>
> 
> see full log:
> http://xeidos.ddns.net/tbot/id_740/tbot.txt
> 
> Before I make a dummy mistake, can you please rebase your patchset?
> 
> Thanks!
> 
> Hmm.. why do you remove the driver in this patch, and add it again
> in patch 2 ?

I am replacing it with a different/new driver, since the old one is broken.

> Isn;t it better to squash this 2 patches into one, so we see your
> changes?

No, that'd be just unreviewable mess. Review 2/4 as a new driver.

-- 
Best regards,
Marek Vasut

[U-Boot] [PATCH 1/4] i2c: rcar_i2c: Remove the driver

[Marek Vasut]

Remove the rcar_i2c driver, since it's no longer used by any
board and will be superseded by a DM and DT capable variant.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
 drivers/i2c/Makefile   |   1 -
 drivers/i2c/rcar_i2c.c | 292 -------------------------------------------------
 2 files changed, 293 deletions(-)
 delete mode 100644 drivers/i2c/rcar_i2c.c

diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index e8bb6327fb..c48a71ac6f 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -28,7 +28,6 @@ obj-$(CONFIG_SYS_I2C_MVTWSI) += mvtwsi.o
 obj-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o
 obj-$(CONFIG_SYS_I2C_MXS) += mxs_i2c.o
 obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o
-obj-$(CONFIG_SYS_I2C_RCAR) += rcar_i2c.o
 obj-$(CONFIG_SYS_I2C_RCAR_IIC) += rcar_iic.o
 obj-$(CONFIG_SYS_I2C_ROCKCHIP) += rk_i2c.o
 obj-$(CONFIG_SYS_I2C_S3C24X0) += s3c24x0_i2c.o exynos_hs_i2c.o
diff --git a/drivers/i2c/rcar_i2c.c b/drivers/i2c/rcar_i2c.c
deleted file mode 100644
index a2627dca5f..0000000000
--- a/drivers/i2c/rcar_i2c.c
+++ /dev/null
@@ -1,292 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * drivers/i2c/rcar_i2c.c
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- *
- * NOTE: This driver should be converted to driver model before June 2017.
- * Please see doc/driver-model/i2c-howto.txt for instructions.
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct rcar_i2c {
-	u32 icscr;
-	u32 icmcr;
-	u32 icssr;
-	u32 icmsr;
-	u32 icsier;
-	u32 icmier;
-	u32 icccr;
-	u32 icsar;
-	u32 icmar;
-	u32 icrxdtxd;
-	u32 icccr2;
-	u32 icmpr;
-	u32 ichpr;
-	u32 iclpr;
-};
-
-#define MCR_MDBS	0x80	/* non-fifo mode switch	*/
-#define MCR_FSCL	0x40	/* override SCL pin	*/
-#define MCR_FSDA	0x20	/* override SDA pin	*/
-#define MCR_OBPC	0x10	/* override pins	*/
-#define MCR_MIE		0x08	/* master if enable	*/
-#define MCR_TSBE	0x04
-#define MCR_FSB		0x02	/* force stop bit	*/
-#define MCR_ESG		0x01	/* en startbit gen.	*/
-
-#define MSR_MASK	0x7f
-#define MSR_MNR		0x40	/* nack received	*/
-#define MSR_MAL		0x20	/* arbitration lost	*/
-#define MSR_MST		0x10	/* sent a stop		*/
-#define MSR_MDE		0x08
-#define MSR_MDT		0x04
-#define MSR_MDR		0x02
-#define MSR_MAT		0x01	/* slave addr xfer done	*/
-
-static const struct rcar_i2c *i2c_dev[CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS] = {
-	(struct rcar_i2c *)CONFIG_SYS_RCAR_I2C0_BASE,
-	(struct rcar_i2c *)CONFIG_SYS_RCAR_I2C1_BASE,
-	(struct rcar_i2c *)CONFIG_SYS_RCAR_I2C2_BASE,
-	(struct rcar_i2c *)CONFIG_SYS_RCAR_I2C3_BASE,
-};
-
-static void rcar_i2c_raw_rw_common(struct rcar_i2c *dev, u8 chip, uint addr)
-{
-	/* set slave address */
-	writel(chip << 1, &dev->icmar);
-	/* set register address */
-	writel(addr, &dev->icrxdtxd);
-	/* clear status */
-	writel(0, &dev->icmsr);
-	/* start master send */
-	writel(MCR_MDBS | MCR_MIE | MCR_ESG, &dev->icmcr);
-
-	while ((readl(&dev->icmsr) & (MSR_MAT | MSR_MDE))
-		!= (MSR_MAT | MSR_MDE))
-		udelay(10);
-
-	/* clear ESG */
-	writel(MCR_MDBS | MCR_MIE, &dev->icmcr);
-	/* start SCLclk */
-	writel(~(MSR_MAT | MSR_MDE), &dev->icmsr);
-
-	while (!(readl(&dev->icmsr) & MSR_MDE))
-		udelay(10);
-}
-
-static void rcar_i2c_raw_rw_finish(struct rcar_i2c *dev)
-{
-	while (!(readl(&dev->icmsr) & MSR_MST))
-		udelay(10);
-
-	writel(0, &dev->icmcr);
-}
-
-static int
-rcar_i2c_raw_write(struct rcar_i2c *dev, u8 chip, uint addr, u8 *val, int size)
-{
-	rcar_i2c_raw_rw_common(dev, chip, addr);
-
-	/* set send date */
-	writel(*val, &dev->icrxdtxd);
-	/* start SCLclk */
-	writel(~MSR_MDE, &dev->icmsr);
-
-	while (!(readl(&dev->icmsr) & MSR_MDE))
-		udelay(10);
-
-	/* set stop condition */
-	writel(MCR_MDBS | MCR_MIE | MCR_FSB, &dev->icmcr);
-	/* start SCLclk */
-	writel(~MSR_MDE, &dev->icmsr);
-
-	rcar_i2c_raw_rw_finish(dev);
-
-	return 0;
-}
-
-static u8
-rcar_i2c_raw_read(struct rcar_i2c *dev, u8 chip, uint addr)
-{
-	u8 ret;
-
-	rcar_i2c_raw_rw_common(dev, chip, addr);
-
-	/* set slave address, receive */
-	writel((chip << 1) | 1, &dev->icmar);
-	/* start master receive */
-	writel(MCR_MDBS | MCR_MIE | MCR_ESG, &dev->icmcr);
-	/* clear status */
-	writel(0, &dev->icmsr);
-
-	while ((readl(&dev->icmsr) & (MSR_MAT | MSR_MDR))
-		!= (MSR_MAT | MSR_MDR))
-		udelay(10);
-
-	/* clear ESG */
-	writel(MCR_MDBS | MCR_MIE, &dev->icmcr);
-	/* prepare stop condition */
-	writel(MCR_MDBS | MCR_MIE | MCR_FSB, &dev->icmcr);
-	/* start SCLclk */
-	writel(~(MSR_MAT | MSR_MDR), &dev->icmsr);
-
-	while (!(readl(&dev->icmsr) & MSR_MDR))
-		udelay(10);
-
-	/* get receive data */
-	ret = (u8)readl(&dev->icrxdtxd);
-	/* start SCLclk */
-	writel(~MSR_MDR, &dev->icmsr);
-
-	rcar_i2c_raw_rw_finish(dev);
-
-	return ret;
-}
-
-/*
- * SCL  = iicck / (20 + SCGD * 8 + F[(ticf + tr + intd) * iicck])
- * iicck  : I2C internal clock < 20 MHz
- * ticf : I2C SCL falling time: 35 ns
- * tr   : I2C SCL rising time:  200 ns
- * intd : LSI internal delay:   I2C0: 50 ns I2C1-3: 5
- * F[n] : n rounded up to an integer
- */
-static u32 rcar_clock_gen(int i2c_no, u32 bus_speed)
-{
-	u32 iicck, f, scl, scgd;
-	u32 intd = 5;
-
-	int bit = 0, cdf_width = 3;
-	for (bit = 0; bit < (1 << cdf_width); bit++) {
-		iicck = CONFIG_HP_CLK_FREQ / (1 + bit);
-		if (iicck < 20000000)
-			break;
-	}
-
-	if (bit > (1 << cdf_width)) {
-		puts("rcar-i2c: Can not get CDF\n");
-		return 0;
-	}
-
-	if (i2c_no == 0)
-		intd = 50;
-
-	f = (35 + 200 + intd) * (iicck / 1000000000);
-
-	for (scgd = 0; scgd < 0x40; scgd++) {
-		scl = iicck / (20 + (scgd * 8) + f);
-		if (scl <= bus_speed)
-			break;
-	}
-
-	if (scgd > 0x40) {
-		puts("rcar-i2c: Can not get SDGB\n");
-		return 0;
-	}
-
-	debug("%s: scl: %d\n", __func__, scl);
-	debug("%s: bit %x\n", __func__, bit);
-	debug("%s: scgd %x\n", __func__, scgd);
-	debug("%s: iccr %x\n", __func__, (scgd << (cdf_width) | bit));
-
-	return scgd << (cdf_width) | bit;
-}
-
-static void
-rcar_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
-{
-	struct rcar_i2c *dev = (struct rcar_i2c *)i2c_dev[adap->hwadapnr];
-	u32 icccr = 0;
-
-	/* No i2c support prior to relocation */
-	if (!(gd->flags & GD_FLG_RELOC))
-		return;
-
-	/*
-	 * reset slave mode.
-	 * slave mode is not used on this driver
-	 */
-	writel(0, &dev->icsier);
-	writel(0, &dev->icsar);
-	writel(0, &dev->icscr);
-	writel(0, &dev->icssr);
-
-	/* reset master mode */
-	writel(0, &dev->icmier);
-	writel(0, &dev->icmcr);
-	writel(0, &dev->icmsr);
-	writel(0, &dev->icmar);
-
-	icccr = rcar_clock_gen(adap->hwadapnr, adap->speed);
-	if (icccr == 0)
-		puts("I2C: Init failed\n");
-	else
-		writel(icccr, &dev->icccr);
-}
-
-static int rcar_i2c_read(struct i2c_adapter *adap, uint8_t chip,
-			uint addr, int alen, u8 *data, int len)
-{
-	struct rcar_i2c *dev = (struct rcar_i2c *)i2c_dev[adap->hwadapnr];
-	int i;
-
-	for (i = 0; i < len; i++)
-		data[i] = rcar_i2c_raw_read(dev, chip, addr + i);
-
-	return 0;
-}
-
-static int rcar_i2c_write(struct i2c_adapter *adap, uint8_t chip, uint addr,
-			int alen, u8 *data, int len)
-{
-	struct rcar_i2c *dev = (struct rcar_i2c *)i2c_dev[adap->hwadapnr];
-	return rcar_i2c_raw_write(dev, chip, addr, data, len);
-}
-
-static int
-rcar_i2c_probe(struct i2c_adapter *adap, u8 dev)
-{
-	return rcar_i2c_read(adap, dev, 0, 0, NULL, 0);
-}
-
-static unsigned int rcar_i2c_set_bus_speed(struct i2c_adapter *adap,
-			unsigned int speed)
-{
-	struct rcar_i2c *dev = (struct rcar_i2c *)i2c_dev[adap->hwadapnr];
-	u32 icccr;
-	int ret = 0;
-
-	rcar_i2c_raw_rw_finish(dev);
-
-	icccr = rcar_clock_gen(adap->hwadapnr, speed);
-	if (icccr == 0) {
-		puts("I2C: Init failed\n");
-		ret = -1;
-	} else {
-		writel(icccr, &dev->icccr);
-	}
-	return ret;
-}
-
-/*
- * Register RCAR i2c adapters
- */
-U_BOOT_I2C_ADAP_COMPLETE(rcar_0, rcar_i2c_init, rcar_i2c_probe, rcar_i2c_read,
-			 rcar_i2c_write, rcar_i2c_set_bus_speed,
-			 CONFIG_SYS_RCAR_I2C0_SPEED, 0, 0)
-U_BOOT_I2C_ADAP_COMPLETE(rcar_1, rcar_i2c_init, rcar_i2c_probe, rcar_i2c_read,
-			 rcar_i2c_write, rcar_i2c_set_bus_speed,
-			 CONFIG_SYS_RCAR_I2C1_SPEED, 0, 1)
-U_BOOT_I2C_ADAP_COMPLETE(rcar_2, rcar_i2c_init, rcar_i2c_probe, rcar_i2c_read,
-			 rcar_i2c_write, rcar_i2c_set_bus_speed,
-			 CONFIG_SYS_RCAR_I2C2_SPEED, 0, 2)
-U_BOOT_I2C_ADAP_COMPLETE(rcar_3, rcar_i2c_init, rcar_i2c_probe, rcar_i2c_read,
-			 rcar_i2c_write, rcar_i2c_set_bus_speed,
-			 CONFIG_SYS_RCAR_I2C3_SPEED, 0, 3)
-- 
2.16.2

[U-Boot] [PATCH 3/4] ARM: rmobile: Enable DM capable RCar I2C driver on Lager

[Marek Vasut]

Enable the DM capable driver instead of the legacy one.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
 configs/lager_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/lager_defconfig b/configs/lager_defconfig
index 901b34e1dd..70083bcbfe 100644
--- a/configs/lager_defconfig
+++ b/configs/lager_defconfig
@@ -54,6 +54,7 @@ CONFIG_CLK_RENESAS=y
 CONFIG_DM_GPIO=y
 CONFIG_RCAR_GPIO=y
 CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_RCAR_I2C=y
 CONFIG_SYS_I2C_RCAR_IIC=y
 CONFIG_DM_MMC=y
 CONFIG_SH_MMCIF=y
-- 
2.16.2