All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Mylène Josserand" <mylene.josserand@bootlin.com>
To: linux@armlinux.org.uk, maxime.ripard@bootlin.com, wens@csie.org,
	marc.zyngier@arm.com, mark.rutland@arm.com, robh+dt@kernel.org,
	horms@verge.net.au, geert@linux-m68k.org, magnus.damm@gmail.com
Cc: linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	clabbe.montjoie@gmail.com, quentin.schulz@bootlin.com,
	thomas.petazzoni@bootlin.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, mylene.josserand@bootlin.com
Subject: [PATCH v8 12/12] ARM: shmobile: Convert file to use cntvoff
Date: Tue,  1 May 2018 14:31:31 +0200	[thread overview]
Message-ID: <20180501123131.7738-13-mylene.josserand@bootlin.com> (raw)
In-Reply-To: <20180501123131.7738-1-mylene.josserand@bootlin.com>

Now that a common function is available for CNTVOFF's
initialization, let's convert shmobile-apmu code to use
this function.

Signed-off-by: Mylène Josserand <mylene.josserand@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/mach-shmobile/common.h          |  1 -
 arch/arm/mach-shmobile/headsmp-apmu.S    | 22 +---------------------
 arch/arm/mach-shmobile/setup-rcar-gen2.c |  3 ++-
 3 files changed, 3 insertions(+), 23 deletions(-)

diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index 43c1ac696274..2109f123bdfb 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -2,7 +2,6 @@
 #ifndef __ARCH_MACH_COMMON_H
 #define __ARCH_MACH_COMMON_H
 
-extern void shmobile_init_cntvoff(void);
 extern void shmobile_init_delay(void);
 extern void shmobile_boot_vector(void);
 extern unsigned long shmobile_boot_fn;
diff --git a/arch/arm/mach-shmobile/headsmp-apmu.S b/arch/arm/mach-shmobile/headsmp-apmu.S
index 5672b5849401..d49ab194766a 100644
--- a/arch/arm/mach-shmobile/headsmp-apmu.S
+++ b/arch/arm/mach-shmobile/headsmp-apmu.S
@@ -11,29 +11,9 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
-ENTRY(shmobile_init_cntvoff)
-	/*
-	 * CNTVOFF has to be initialized either from non-secure Hypervisor
-	 * mode or secure Monitor mode with SCR.NS==1. If TrustZone is enabled
-	 * then it should be handled by the secure code
-	 */
-	cps	#MON_MODE
-	mrc	p15, 0, r1, c1, c1, 0		/* Get Secure Config */
-	orr	r0, r1, #1
-	mcr	p15, 0, r0, c1, c1, 0		/* Set Non Secure bit */
-	instr_sync
-	mov	r0, #0
-	mcrr	p15, 4, r0, r0, c14		/* CNTVOFF = 0 */
-	instr_sync
-	mcr	p15, 0, r1, c1, c1, 0		/* Set Secure bit */
-	instr_sync
-	cps	#SVC_MODE
-	ret	lr
-ENDPROC(shmobile_init_cntvoff)
-
 #ifdef CONFIG_SMP
 ENTRY(shmobile_boot_apmu)
-	bl	shmobile_init_cntvoff
+	bl	secure_cntvoff_init
 	b	secondary_startup
 ENDPROC(shmobile_boot_apmu)
 #endif
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 5561dbed7a33..4a881026d740 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -26,6 +26,7 @@
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
+#include <asm/secure_cntvoff.h>
 #include "common.h"
 #include "rcar-gen2.h"
 
@@ -70,7 +71,7 @@ void __init rcar_gen2_timer_init(void)
 	void __iomem *base;
 	u32 freq;
 
-	shmobile_init_cntvoff();
+	secure_cntvoff_init();
 
 	if (of_machine_is_compatible("renesas,r8a7745") ||
 	    of_machine_is_compatible("renesas,r8a7792") ||
-- 
2.11.0

WARNING: multiple messages have this Message-ID (diff)
From: mylene.josserand@bootlin.com (Mylène Josserand)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 12/12] ARM: shmobile: Convert file to use cntvoff
Date: Tue,  1 May 2018 14:31:31 +0200	[thread overview]
Message-ID: <20180501123131.7738-13-mylene.josserand@bootlin.com> (raw)
In-Reply-To: <20180501123131.7738-1-mylene.josserand@bootlin.com>

Now that a common function is available for CNTVOFF's
initialization, let's convert shmobile-apmu code to use
this function.

Signed-off-by: Myl?ne Josserand <mylene.josserand@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/mach-shmobile/common.h          |  1 -
 arch/arm/mach-shmobile/headsmp-apmu.S    | 22 +---------------------
 arch/arm/mach-shmobile/setup-rcar-gen2.c |  3 ++-
 3 files changed, 3 insertions(+), 23 deletions(-)

diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index 43c1ac696274..2109f123bdfb 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -2,7 +2,6 @@
 #ifndef __ARCH_MACH_COMMON_H
 #define __ARCH_MACH_COMMON_H
 
-extern void shmobile_init_cntvoff(void);
 extern void shmobile_init_delay(void);
 extern void shmobile_boot_vector(void);
 extern unsigned long shmobile_boot_fn;
diff --git a/arch/arm/mach-shmobile/headsmp-apmu.S b/arch/arm/mach-shmobile/headsmp-apmu.S
index 5672b5849401..d49ab194766a 100644
--- a/arch/arm/mach-shmobile/headsmp-apmu.S
+++ b/arch/arm/mach-shmobile/headsmp-apmu.S
@@ -11,29 +11,9 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
-ENTRY(shmobile_init_cntvoff)
-	/*
-	 * CNTVOFF has to be initialized either from non-secure Hypervisor
-	 * mode or secure Monitor mode with SCR.NS==1. If TrustZone is enabled
-	 * then it should be handled by the secure code
-	 */
-	cps	#MON_MODE
-	mrc	p15, 0, r1, c1, c1, 0		/* Get Secure Config */
-	orr	r0, r1, #1
-	mcr	p15, 0, r0, c1, c1, 0		/* Set Non Secure bit */
-	instr_sync
-	mov	r0, #0
-	mcrr	p15, 4, r0, r0, c14		/* CNTVOFF = 0 */
-	instr_sync
-	mcr	p15, 0, r1, c1, c1, 0		/* Set Secure bit */
-	instr_sync
-	cps	#SVC_MODE
-	ret	lr
-ENDPROC(shmobile_init_cntvoff)
-
 #ifdef CONFIG_SMP
 ENTRY(shmobile_boot_apmu)
-	bl	shmobile_init_cntvoff
+	bl	secure_cntvoff_init
 	b	secondary_startup
 ENDPROC(shmobile_boot_apmu)
 #endif
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 5561dbed7a33..4a881026d740 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -26,6 +26,7 @@
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
+#include <asm/secure_cntvoff.h>
 #include "common.h"
 #include "rcar-gen2.h"
 
@@ -70,7 +71,7 @@ void __init rcar_gen2_timer_init(void)
 	void __iomem *base;
 	u32 freq;
 
-	shmobile_init_cntvoff();
+	secure_cntvoff_init();
 
 	if (of_machine_is_compatible("renesas,r8a7745") ||
 	    of_machine_is_compatible("renesas,r8a7792") ||
-- 
2.11.0

  parent reply	other threads:[~2018-05-01 12:32 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-01 12:31 [PATCH v8 00/12] Sunxi: Add SMP support on A83T Mylène Josserand
2018-05-01 12:31 ` Mylène Josserand
2018-05-01 12:31 ` [PATCH v8 01/12] ARM: Allow this header to be included by assembly files Mylène Josserand
2018-05-01 12:31   ` Mylène Josserand
2018-05-01 12:31 ` [PATCH v8 02/12] ARM: sunxi: smp: Move assembly code into a file Mylène Josserand
2018-05-01 12:31   ` Mylène Josserand
2018-05-02 13:18   ` Maxime Ripard
2018-05-02 13:18     ` Maxime Ripard
2018-05-01 12:31 ` [PATCH v8 03/12] ARM: dts: sun8i: Add CPUCFG device node for A83T dtsi Mylène Josserand
2018-05-01 12:31   ` Mylène Josserand
2018-05-01 12:31 ` [PATCH v8 04/12] ARM: dts: sun8i: Add R_CPUCFG device node for the " Mylène Josserand
2018-05-01 12:31   ` Mylène Josserand
2018-05-01 12:31 ` [PATCH v8 05/12] ARM: dts: sun8i: a83t: Add CCI-400 node Mylène Josserand
2018-05-01 12:31   ` Mylène Josserand
2018-05-01 12:31 ` [PATCH v8 06/12] ARM: smp: Add initialization of CNTVOFF Mylène Josserand
2018-05-01 12:31   ` Mylène Josserand
2018-05-01 12:31 ` [PATCH v8 07/12] ARM: sunxi: " Mylène Josserand
2018-05-01 12:31   ` Mylène Josserand
2018-05-02 13:08   ` Maxime Ripard
2018-05-02 13:08     ` Maxime Ripard
2018-05-02 13:28     ` Mylène Josserand
2018-05-02 13:28       ` Mylène Josserand
2018-05-01 12:31 ` [PATCH v8 08/12] ARM: sun9i: smp: Rename clusters's power-off Mylène Josserand
2018-05-01 12:31   ` Mylène Josserand
2018-05-01 12:31 ` [PATCH v8 09/12] ARM: sun9i: smp: Add is_a83t field Mylène Josserand
2018-05-01 12:31   ` Mylène Josserand
2018-05-02 13:09   ` Maxime Ripard
2018-05-02 13:09     ` Maxime Ripard
2018-05-01 12:31 ` [PATCH v8 10/12] ARM: sun8i: smp: Add support for A83T Mylène Josserand
2018-05-01 12:31   ` Mylène Josserand
2018-05-02 13:14   ` Maxime Ripard
2018-05-02 13:14     ` Maxime Ripard
2018-05-01 12:31 ` [PATCH v8 11/12] ARM: dts: sun8i: Add enable-method for SMP support for the A83T SoC Mylène Josserand
2018-05-01 12:31   ` Mylène Josserand
2018-05-01 12:31 ` Mylène Josserand [this message]
2018-05-01 12:31   ` [PATCH v8 12/12] ARM: shmobile: Convert file to use cntvoff Mylène Josserand
2018-05-02  6:36   ` Simon Horman
2018-05-02  6:36     ` Simon Horman
2018-05-02 13:18     ` Maxime Ripard
2018-05-02 13:18       ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180501123131.7738-13-mylene.josserand@bootlin.com \
    --to=mylene.josserand@bootlin.com \
    --cc=clabbe.montjoie@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=geert@linux-m68k.org \
    --cc=horms@verge.net.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=magnus.damm@gmail.com \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=quentin.schulz@bootlin.com \
    --cc=robh+dt@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.