All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Shawn Guo <shawnguo@kernel.org>, Mark Brown <broonie@kernel.org>,
	"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
	kernel@pengutronix.de, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Andrew Morton <akpm@linux-foundation.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Leonard Crestez <leonard.crestez@nxp.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	Russell King <linux@armlinux.org.uk>,
	linux-imx@nxp.com, yibin.gong@nxp.com,
	"A.s. Dong" <aisheng.dong@nxp.com>
Subject: [PATCH v9 1/6] ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff property
Date: Thu,  2 Aug 2018 12:34:20 +0200	[thread overview]
Message-ID: <20180802103425.3053-2-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20180802103425.3053-1-o.rempel@pengutronix.de>

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/clock/imx6q-clock.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index a45ca67a9d5f..e1308346e00d 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -6,6 +6,14 @@ Required properties:
 - interrupts: Should contain CCM interrupt
 - #clock-cells: Should be <1>
 
+Optional properties:
+- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal
+  on power off.
+  Use this property if the SoC should be powered off by external power
+  management IC (PMIC) triggered via PMIC_STBY_REQ signal.
+  Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
+  be using "syscon-poweroff" driver instead.
+
 The clock consumer should specify the desired clock by having the clock
 ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6qdl-clock.h
 for the full list of i.MX6 Quad and DualLite clock IDs.
-- 
2.18.0


WARNING: multiple messages have this Message-ID (diff)
From: o.rempel@pengutronix.de (Oleksij Rempel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 1/6] ARM: imx6q: provide documentation for new fsl, pmic-stby-poweroff property
Date: Thu,  2 Aug 2018 12:34:20 +0200	[thread overview]
Message-ID: <20180802103425.3053-2-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20180802103425.3053-1-o.rempel@pengutronix.de>

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/clock/imx6q-clock.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index a45ca67a9d5f..e1308346e00d 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -6,6 +6,14 @@ Required properties:
 - interrupts: Should contain CCM interrupt
 - #clock-cells: Should be <1>
 
+Optional properties:
+- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal
+  on power off.
+  Use this property if the SoC should be powered off by external power
+  management IC (PMIC) triggered via PMIC_STBY_REQ signal.
+  Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
+  be using "syscon-poweroff" driver instead.
+
 The clock consumer should specify the desired clock by having the clock
 ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6qdl-clock.h
 for the full list of i.MX6 Quad and DualLite clock IDs.
-- 
2.18.0

  reply	other threads:[~2018-08-02 10:34 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-02 10:34 [PATCH v9 0/6] provide power off support for iMX6 with external PMIC Oleksij Rempel
2018-08-02 10:34 ` Oleksij Rempel
2018-08-02 10:34 ` Oleksij Rempel [this message]
2018-08-02 10:34   ` [PATCH v9 1/6] ARM: imx6q: provide documentation for new fsl, pmic-stby-poweroff property Oleksij Rempel
2018-09-12  1:04   ` [PATCH v9 1/6] ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff property Shawn Guo
2018-09-12  1:04     ` Shawn Guo
2018-08-02 10:34 ` [PATCH v9 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set Oleksij Rempel
2018-08-02 10:34   ` [PATCH v9 2/6] ARM: imx6: register pm_power_off handler if "fsl, pmic-stby-poweroff" " Oleksij Rempel
2018-09-12  1:10   ` [PATCH v9 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" " Shawn Guo
2018-09-12  1:10     ` Shawn Guo
2018-08-02 10:34 ` [PATCH v9 3/6] kernel/reboot.c: export pm_power_off_prepare Oleksij Rempel
2018-08-02 10:34   ` Oleksij Rempel
2018-08-02 10:44   ` Mark Brown
2018-08-02 10:44     ` Mark Brown
2018-08-02 10:44     ` Mark Brown
2018-08-02 10:47     ` Oleksij Rempel
2018-08-02 10:47       ` Oleksij Rempel
2018-08-02 11:35       ` Mark Brown
2018-08-02 11:35         ` Mark Brown
2018-08-27  1:48         ` Shawn Guo
2018-08-27  1:48           ` Shawn Guo
2018-09-06 10:15           ` Mark Brown
2018-09-06 10:15             ` Mark Brown
2018-09-07  7:35             ` Oleksij Rempel
2018-09-07  7:35               ` Oleksij Rempel
2018-09-09  2:00             ` Shawn Guo
2018-09-09  2:00               ` Shawn Guo
2018-09-09  2:00               ` Shawn Guo
2018-09-10 15:19               ` Mark Brown
2018-09-10 15:19                 ` Mark Brown
2018-09-11  1:53                 ` Shawn Guo
2018-09-11  1:53                   ` Shawn Guo
2018-09-11  4:36                   ` Oleksij Rempel
2018-09-11  4:36                     ` Oleksij Rempel
2018-09-11  4:36                     ` Oleksij Rempel
2018-09-11 15:19                   ` Mark Brown
2018-09-11 15:19                     ` Mark Brown
2018-08-02 10:34 ` [PATCH v9 4/6] regulator: pfuze100: add fsl,pmic-stby-poweroff property Oleksij Rempel
2018-08-02 10:34   ` [PATCH v9 4/6] regulator: pfuze100: add fsl, pmic-stby-poweroff property Oleksij Rempel
2018-08-02 10:34 ` [PATCH v9 5/6] regulator: pfuze100-regulator: provide pm_power_off_prepare handler Oleksij Rempel
2018-08-02 10:34   ` Oleksij Rempel
2018-08-02 10:34   ` Oleksij Rempel
2018-08-02 10:34 ` [PATCH v9 6/6] ARM: dts: imx6: RIoTboard provide standby on power off option Oleksij Rempel
2018-08-02 10:34   ` Oleksij Rempel
2018-09-12  1:11   ` Shawn Guo
2018-09-12  1:11     ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180802103425.3053-2-o.rempel@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=aisheng.dong@nxp.com \
    --cc=akpm@linux-foundation.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=leonard.crestez@nxp.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=rafael.j.wysocki@intel.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@codeaurora.org \
    --cc=shawnguo@kernel.org \
    --cc=yibin.gong@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.