From: Oleksij Rempel <o.rempel@pengutronix.de> To: Shawn Guo <shawnguo@kernel.org>, Mark Brown <broonie@kernel.org>, "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Oleksij Rempel <o.rempel@pengutronix.de>, kernel@pengutronix.de, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org, Andrew Morton <akpm@linux-foundation.org>, Liam Girdwood <lgirdwood@gmail.com>, Leonard Crestez <leonard.crestez@nxp.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@codeaurora.org>, Fabio Estevam <fabio.estevam@nxp.com>, Russell King <linux@armlinux.org.uk>, linux-imx@nxp.com, yibin.gong@nxp.com, "A.s. Dong" <aisheng.dong@nxp.com> Subject: [PATCH v9 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set Date: Thu, 2 Aug 2018 12:34:21 +0200 [thread overview] Message-ID: <20180802103425.3053-3-o.rempel@pengutronix.de> (raw) In-Reply-To: <20180802103425.3053-1-o.rempel@pengutronix.de> One of the Freescale recommended sequences for power off with external PMIC is the following: ... 3. SoC is programming PMIC for power off when standby is asserted. 4. In CCM STOP mode, Standby is asserted, PMIC gates SoC supplies. See: http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf page 5083 This patch implements step 4. of this sequence. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/mach-imx/pm-imx6.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 017539dd712b..2f5c643f62fb 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -601,6 +601,28 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata IMX6Q_GPR1_GINT); } +static void imx6_pm_stby_poweroff(void) +{ + imx6_set_lpm(STOP_POWER_OFF); + imx6q_suspend_finish(0); + + mdelay(1000); + + pr_emerg("Unable to poweroff system\n"); +} + +static int imx6_pm_stby_poweroff_probe(void) +{ + if (pm_power_off) { + pr_warn("%s: pm_power_off already claimed %p %pf!\n", + __func__, pm_power_off, pm_power_off); + return -EBUSY; + } + + pm_power_off = imx6_pm_stby_poweroff; + return 0; +} + void __init imx6_pm_ccm_init(const char *ccm_compat) { struct device_node *np; @@ -617,6 +639,9 @@ void __init imx6_pm_ccm_init(const char *ccm_compat) val = readl_relaxed(ccm_base + CLPCR); val &= ~BM_CLPCR_LPM; writel_relaxed(val, ccm_base + CLPCR); + + if (of_property_read_bool(np, "fsl,pmic-stby-poweroff")) + imx6_pm_stby_poweroff_probe(); } void __init imx6q_pm_init(void) -- 2.18.0
WARNING: multiple messages have this Message-ID (diff)
From: o.rempel@pengutronix.de (Oleksij Rempel) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v9 2/6] ARM: imx6: register pm_power_off handler if "fsl, pmic-stby-poweroff" is set Date: Thu, 2 Aug 2018 12:34:21 +0200 [thread overview] Message-ID: <20180802103425.3053-3-o.rempel@pengutronix.de> (raw) In-Reply-To: <20180802103425.3053-1-o.rempel@pengutronix.de> One of the Freescale recommended sequences for power off with external PMIC is the following: ... 3. SoC is programming PMIC for power off when standby is asserted. 4. In CCM STOP mode, Standby is asserted, PMIC gates SoC supplies. See: http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf page 5083 This patch implements step 4. of this sequence. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/mach-imx/pm-imx6.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 017539dd712b..2f5c643f62fb 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -601,6 +601,28 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata IMX6Q_GPR1_GINT); } +static void imx6_pm_stby_poweroff(void) +{ + imx6_set_lpm(STOP_POWER_OFF); + imx6q_suspend_finish(0); + + mdelay(1000); + + pr_emerg("Unable to poweroff system\n"); +} + +static int imx6_pm_stby_poweroff_probe(void) +{ + if (pm_power_off) { + pr_warn("%s: pm_power_off already claimed %p %pf!\n", + __func__, pm_power_off, pm_power_off); + return -EBUSY; + } + + pm_power_off = imx6_pm_stby_poweroff; + return 0; +} + void __init imx6_pm_ccm_init(const char *ccm_compat) { struct device_node *np; @@ -617,6 +639,9 @@ void __init imx6_pm_ccm_init(const char *ccm_compat) val = readl_relaxed(ccm_base + CLPCR); val &= ~BM_CLPCR_LPM; writel_relaxed(val, ccm_base + CLPCR); + + if (of_property_read_bool(np, "fsl,pmic-stby-poweroff")) + imx6_pm_stby_poweroff_probe(); } void __init imx6q_pm_init(void) -- 2.18.0
next prev parent reply other threads:[~2018-08-02 10:34 UTC|newest] Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-08-02 10:34 [PATCH v9 0/6] provide power off support for iMX6 with external PMIC Oleksij Rempel 2018-08-02 10:34 ` Oleksij Rempel 2018-08-02 10:34 ` [PATCH v9 1/6] ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff property Oleksij Rempel 2018-08-02 10:34 ` [PATCH v9 1/6] ARM: imx6q: provide documentation for new fsl, pmic-stby-poweroff property Oleksij Rempel 2018-09-12 1:04 ` [PATCH v9 1/6] ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff property Shawn Guo 2018-09-12 1:04 ` Shawn Guo 2018-08-02 10:34 ` Oleksij Rempel [this message] 2018-08-02 10:34 ` [PATCH v9 2/6] ARM: imx6: register pm_power_off handler if "fsl, pmic-stby-poweroff" is set Oleksij Rempel 2018-09-12 1:10 ` [PATCH v9 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" " Shawn Guo 2018-09-12 1:10 ` Shawn Guo 2018-08-02 10:34 ` [PATCH v9 3/6] kernel/reboot.c: export pm_power_off_prepare Oleksij Rempel 2018-08-02 10:34 ` Oleksij Rempel 2018-08-02 10:44 ` Mark Brown 2018-08-02 10:44 ` Mark Brown 2018-08-02 10:44 ` Mark Brown 2018-08-02 10:47 ` Oleksij Rempel 2018-08-02 10:47 ` Oleksij Rempel 2018-08-02 11:35 ` Mark Brown 2018-08-02 11:35 ` Mark Brown 2018-08-27 1:48 ` Shawn Guo 2018-08-27 1:48 ` Shawn Guo 2018-09-06 10:15 ` Mark Brown 2018-09-06 10:15 ` Mark Brown 2018-09-07 7:35 ` Oleksij Rempel 2018-09-07 7:35 ` Oleksij Rempel 2018-09-09 2:00 ` Shawn Guo 2018-09-09 2:00 ` Shawn Guo 2018-09-09 2:00 ` Shawn Guo 2018-09-10 15:19 ` Mark Brown 2018-09-10 15:19 ` Mark Brown 2018-09-11 1:53 ` Shawn Guo 2018-09-11 1:53 ` Shawn Guo 2018-09-11 4:36 ` Oleksij Rempel 2018-09-11 4:36 ` Oleksij Rempel 2018-09-11 4:36 ` Oleksij Rempel 2018-09-11 15:19 ` Mark Brown 2018-09-11 15:19 ` Mark Brown 2018-08-02 10:34 ` [PATCH v9 4/6] regulator: pfuze100: add fsl,pmic-stby-poweroff property Oleksij Rempel 2018-08-02 10:34 ` [PATCH v9 4/6] regulator: pfuze100: add fsl, pmic-stby-poweroff property Oleksij Rempel 2018-08-02 10:34 ` [PATCH v9 5/6] regulator: pfuze100-regulator: provide pm_power_off_prepare handler Oleksij Rempel 2018-08-02 10:34 ` Oleksij Rempel 2018-08-02 10:34 ` Oleksij Rempel 2018-08-02 10:34 ` [PATCH v9 6/6] ARM: dts: imx6: RIoTboard provide standby on power off option Oleksij Rempel 2018-08-02 10:34 ` Oleksij Rempel 2018-09-12 1:11 ` Shawn Guo 2018-09-12 1:11 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180802103425.3053-3-o.rempel@pengutronix.de \ --to=o.rempel@pengutronix.de \ --cc=aisheng.dong@nxp.com \ --cc=akpm@linux-foundation.org \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=fabio.estevam@nxp.com \ --cc=kernel@pengutronix.de \ --cc=leonard.crestez@nxp.com \ --cc=lgirdwood@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=mark.rutland@arm.com \ --cc=mturquette@baylibre.com \ --cc=rafael.j.wysocki@intel.com \ --cc=robh+dt@kernel.org \ --cc=sboyd@codeaurora.org \ --cc=shawnguo@kernel.org \ --cc=yibin.gong@nxp.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.