From: Yu-cheng Yu <yu-cheng.yu@intel.com> To: x86@kernel.org, "H. Peter Anvin" <hpa@zytor.com>, Thomas Gleixner <tglx@linutronix.de>, Ingo Molnar <mingo@redhat.com>, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org, linux-mm@kvack.org, linux-arch@vger.kernel.org, linux-api@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>, Andy Lutomirski <luto@amacapital.net>, Balbir Singh <bsingharora@gmail.com>, Cyrill Gorcunov <gorcunov@gmail.com>, Dave Hansen <dave.hansen@linux.intel.com>, Florian Weimer <fweimer@redhat.com>, "H.J. Lu" <hjl.tools@gmail.com>, Jann Horn <jannh@google.com>, Jonathan Corbet <corbet@lwn.net>, Kees Cook <keescook@chromium.org>, Mike Kravetz <mike.kravetz@oracle.com>, Nadav Amit <nadav.amit@gmail.com>, Oleg Nesterov <oleg@redhat.com>, Pavel Machek <pavel@ucw.cz>, Peter Zijlstra <peterz@infradead.org>, Randy Dunlap <rdunlap@infradead.org>, "Ravi V. Shankar" <ravi.v.shankar@intel.com>, Vedvyas Shanbhogue <vedvyas.shanbhogue@intel.com> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Subject: [RFC PATCH v4 7/9] x86/cet/ibt: Add ENDBR to op-code-map Date: Fri, 21 Sep 2018 08:05:51 -0700 [thread overview] Message-ID: <20180921150553.21016-8-yu-cheng.yu@intel.com> (raw) In-Reply-To: <20180921150553.21016-1-yu-cheng.yu@intel.com> Add control transfer terminating instructions: ENDBR64/ENDBR32: Mark a valid 64/32-bit control transfer endpoint. Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> --- arch/x86/lib/x86-opcode-map.txt | 13 +++++++++++-- tools/objtool/arch/x86/lib/x86-opcode-map.txt | 13 +++++++++++-- 2 files changed, 22 insertions(+), 4 deletions(-) diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt index c5e825d44766..fbc53481bc59 100644 --- a/arch/x86/lib/x86-opcode-map.txt +++ b/arch/x86/lib/x86-opcode-map.txt @@ -620,7 +620,16 @@ ea: SAVEPREVSSP (f3) # Skip 0xeb-0xff EndTable -Table: 3-byte opcode 2 (0x0f 0x38) +Table: 3-byte opcode 2 (0x0f 0x1e) +Referrer: +AVXcode: +# Skip 0x00-0xf9 +fa: ENDBR64 (f3) +fb: ENDBR32 (f3) +#skip 0xfc-0xff +EndTable + +Table: 3-byte opcode 3 (0x0f 0x38) Referrer: 3-byte escape 1 AVXcode: 2 # 0x0f 0x38 0x00-0x0f @@ -804,7 +813,7 @@ f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSS Pq,Qq f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) EndTable -Table: 3-byte opcode 3 (0x0f 0x3a) +Table: 3-byte opcode 4 (0x0f 0x3a) Referrer: 3-byte escape 2 AVXcode: 3 # 0x0f 0x3a 0x00-0xff diff --git a/tools/objtool/arch/x86/lib/x86-opcode-map.txt b/tools/objtool/arch/x86/lib/x86-opcode-map.txt index c5e825d44766..fbc53481bc59 100644 --- a/tools/objtool/arch/x86/lib/x86-opcode-map.txt +++ b/tools/objtool/arch/x86/lib/x86-opcode-map.txt @@ -620,7 +620,16 @@ ea: SAVEPREVSSP (f3) # Skip 0xeb-0xff EndTable -Table: 3-byte opcode 2 (0x0f 0x38) +Table: 3-byte opcode 2 (0x0f 0x1e) +Referrer: +AVXcode: +# Skip 0x00-0xf9 +fa: ENDBR64 (f3) +fb: ENDBR32 (f3) +#skip 0xfc-0xff +EndTable + +Table: 3-byte opcode 3 (0x0f 0x38) Referrer: 3-byte escape 1 AVXcode: 2 # 0x0f 0x38 0x00-0x0f @@ -804,7 +813,7 @@ f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSS Pq,Qq f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) EndTable -Table: 3-byte opcode 3 (0x0f 0x3a) +Table: 3-byte opcode 4 (0x0f 0x3a) Referrer: 3-byte escape 2 AVXcode: 3 # 0x0f 0x3a 0x00-0xff -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Yu-cheng Yu <yu-cheng.yu@intel.com> To: x86@kernel.org, "H. Peter Anvin" <hpa@zytor.com>, Thomas Gleixner <tglx@linutronix.de>, Ingo Molnar <mingo@redhat.com>, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org, linux-mm@kvack.org, linux-arch@vger.kernel.org, linux-api@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>, Andy Lutomirski <luto@amacapital.net>, Balbir Singh <bsingharora@gmail.com>, Cyrill Gorcunov <gorcunov@gmail.com>, Dave Hansen <dave.hansen@linux.intel.com>, Florian Weimer <fweimer@redhat.com>, "H.J. Lu" <hjl.tools@gmail.com>, Jann Horn <jannh@google.com>, Jonathan Corbet <corbet@lwn.net>, Kees Cook <keescook@chromium.org>, Mike Kravetz <mike.kravetz@oracle.com>, Nadav Amit <nadav.amit@gmail.com>, Oleg Nesterov <oleg@redhat.com>, Pavel Machek <pavel@ucw.cz>Peter Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Subject: [RFC PATCH v4 7/9] x86/cet/ibt: Add ENDBR to op-code-map Date: Fri, 21 Sep 2018 08:05:51 -0700 [thread overview] Message-ID: <20180921150553.21016-8-yu-cheng.yu@intel.com> (raw) In-Reply-To: <20180921150553.21016-1-yu-cheng.yu@intel.com> Add control transfer terminating instructions: ENDBR64/ENDBR32: Mark a valid 64/32-bit control transfer endpoint. Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> --- arch/x86/lib/x86-opcode-map.txt | 13 +++++++++++-- tools/objtool/arch/x86/lib/x86-opcode-map.txt | 13 +++++++++++-- 2 files changed, 22 insertions(+), 4 deletions(-) diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt index c5e825d44766..fbc53481bc59 100644 --- a/arch/x86/lib/x86-opcode-map.txt +++ b/arch/x86/lib/x86-opcode-map.txt @@ -620,7 +620,16 @@ ea: SAVEPREVSSP (f3) # Skip 0xeb-0xff EndTable -Table: 3-byte opcode 2 (0x0f 0x38) +Table: 3-byte opcode 2 (0x0f 0x1e) +Referrer: +AVXcode: +# Skip 0x00-0xf9 +fa: ENDBR64 (f3) +fb: ENDBR32 (f3) +#skip 0xfc-0xff +EndTable + +Table: 3-byte opcode 3 (0x0f 0x38) Referrer: 3-byte escape 1 AVXcode: 2 # 0x0f 0x38 0x00-0x0f @@ -804,7 +813,7 @@ f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSS Pq,Qq f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) EndTable -Table: 3-byte opcode 3 (0x0f 0x3a) +Table: 3-byte opcode 4 (0x0f 0x3a) Referrer: 3-byte escape 2 AVXcode: 3 # 0x0f 0x3a 0x00-0xff diff --git a/tools/objtool/arch/x86/lib/x86-opcode-map.txt b/tools/objtool/arch/x86/lib/x86-opcode-map.txt index c5e825d44766..fbc53481bc59 100644 --- a/tools/objtool/arch/x86/lib/x86-opcode-map.txt +++ b/tools/objtool/arch/x86/lib/x86-opcode-map.txt @@ -620,7 +620,16 @@ ea: SAVEPREVSSP (f3) # Skip 0xeb-0xff EndTable -Table: 3-byte opcode 2 (0x0f 0x38) +Table: 3-byte opcode 2 (0x0f 0x1e) +Referrer: +AVXcode: +# Skip 0x00-0xf9 +fa: ENDBR64 (f3) +fb: ENDBR32 (f3) +#skip 0xfc-0xff +EndTable + +Table: 3-byte opcode 3 (0x0f 0x38) Referrer: 3-byte escape 1 AVXcode: 2 # 0x0f 0x38 0x00-0x0f @@ -804,7 +813,7 @@ f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSS Pq,Qq f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) EndTable -Table: 3-byte opcode 3 (0x0f 0x3a) +Table: 3-byte opcode 4 (0x0f 0x3a) Referrer: 3-byte escape 2 AVXcode: 3 # 0x0f 0x3a 0x00-0xff -- 2.17.1
next prev parent reply other threads:[~2018-09-21 15:10 UTC|newest] Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-09-21 15:05 [RFC PATCH v4 0/9] Control Flow Enforcement: Branch Tracking, PTRACE Yu-cheng Yu 2018-09-21 15:05 ` Yu-cheng Yu 2018-09-21 15:05 ` [RFC PATCH v4 1/9] x86/cet/ibt: Add Kconfig option for user-mode Indirect Branch Tracking Yu-cheng Yu 2018-09-21 15:05 ` Yu-cheng Yu 2018-09-21 15:05 ` [RFC PATCH v4 2/9] x86/cet/ibt: User-mode indirect branch tracking support Yu-cheng Yu 2018-09-21 15:05 ` Yu-cheng Yu 2018-10-03 18:58 ` Eugene Syromiatnikov 2018-10-03 18:58 ` Eugene Syromiatnikov 2018-09-21 15:05 ` [RFC PATCH v4 3/9] x86/cet/ibt: Add IBT legacy code bitmap allocation function Yu-cheng Yu 2018-09-21 15:05 ` Yu-cheng Yu 2018-10-03 19:57 ` Eugene Syromiatnikov 2018-10-03 19:57 ` Eugene Syromiatnikov 2018-10-05 16:13 ` Yu-cheng Yu 2018-10-05 16:13 ` Yu-cheng Yu 2018-10-05 16:28 ` Andy Lutomirski 2018-10-05 16:28 ` Andy Lutomirski 2018-10-05 16:58 ` Yu-cheng Yu 2018-10-05 16:58 ` Yu-cheng Yu 2018-10-05 16:58 ` Yu-cheng Yu 2018-10-05 17:07 ` Andy Lutomirski 2018-10-05 17:07 ` Andy Lutomirski 2018-10-05 17:26 ` Eugene Syromiatnikov 2018-10-05 17:26 ` Eugene Syromiatnikov 2018-10-05 17:26 ` Eugene Syromiatnikov 2018-10-10 15:56 ` Yu-cheng Yu 2018-10-10 15:56 ` Yu-cheng Yu 2018-10-10 15:56 ` Yu-cheng Yu 2018-10-04 16:11 ` Andy Lutomirski 2018-10-04 16:11 ` Andy Lutomirski 2018-09-21 15:05 ` [RFC PATCH v4 4/9] mm/mmap: Add IBT bitmap size to address space limit check Yu-cheng Yu 2018-09-21 15:05 ` Yu-cheng Yu 2018-10-03 20:21 ` Eugene Syromiatnikov 2018-10-03 20:21 ` Eugene Syromiatnikov 2018-09-21 15:05 ` [RFC PATCH v4 5/9] x86/cet/ibt: ELF header parsing for IBT Yu-cheng Yu 2018-09-21 15:05 ` Yu-cheng Yu 2018-09-21 15:05 ` [RFC PATCH v4 6/9] x86/cet/ibt: Add arch_prctl functions " Yu-cheng Yu 2018-09-21 15:05 ` Yu-cheng Yu 2018-10-04 13:28 ` Eugene Syromiatnikov 2018-10-04 13:28 ` Eugene Syromiatnikov 2018-10-04 15:37 ` Yu-cheng Yu 2018-10-04 15:37 ` Yu-cheng Yu 2018-10-04 16:07 ` Florian Weimer 2018-10-04 16:07 ` Florian Weimer 2018-10-04 16:12 ` Andy Lutomirski 2018-10-04 16:12 ` Andy Lutomirski 2018-10-04 16:25 ` Yu-cheng Yu 2018-10-04 16:25 ` Yu-cheng Yu 2018-10-04 16:08 ` Andy Lutomirski 2018-10-04 16:08 ` Andy Lutomirski 2018-09-21 15:05 ` Yu-cheng Yu [this message] 2018-09-21 15:05 ` [RFC PATCH v4 7/9] x86/cet/ibt: Add ENDBR to op-code-map Yu-cheng Yu 2018-09-21 15:05 ` [RFC PATCH v4 8/9] x86: Insert endbr32/endbr64 to vDSO Yu-cheng Yu 2018-09-21 15:05 ` Yu-cheng Yu 2018-09-21 15:05 ` [RFC PATCH v4 9/9] x86/cet: Add PTRACE interface for CET Yu-cheng Yu 2018-09-21 15:05 ` Yu-cheng Yu
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180921150553.21016-8-yu-cheng.yu@intel.com \ --to=yu-cheng.yu@intel.com \ --cc=arnd@arndb.de \ --cc=bsingharora@gmail.com \ --cc=corbet@lwn.net \ --cc=dave.hansen@linux.intel.com \ --cc=fweimer@redhat.com \ --cc=gorcunov@gmail.com \ --cc=hjl.tools@gmail.com \ --cc=hpa@zytor.com \ --cc=jannh@google.com \ --cc=keescook@chromium.org \ --cc=linux-api@vger.kernel.org \ --cc=linux-arch@vger.kernel.org \ --cc=linux-doc@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mm@kvack.org \ --cc=luto@amacapital.net \ --cc=mike.kravetz@oracle.com \ --cc=mingo@redhat.com \ --cc=nadav.amit@gmail.com \ --cc=oleg@redhat.com \ --cc=pavel@ucw.cz \ --cc=peterz@infradead.org \ --cc=ravi.v.shankar@intel.com \ --cc=rdunlap@infradead.org \ --cc=tglx@linutronix.de \ --cc=vedvyas.shanbhogue@intel.com \ --cc=x86@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.