All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Vetter <daniel@ffwll.ch>
To: Deepak Rawat <drawat@vmware.com>
Cc: thellstrom@vmware.com, syeh@vmware.com,
	Daniel Vetter <daniel.vetter@ffwll.ch>,
	intel-gfx@lists.freedesktop.org, igt-dev@lists.freedesktop.org,
	Pekka Paalanen <ppaalanen@gmail.com>,
	linux-graphics-maintainer@vmware.com
Subject: Re: [PATCH i-g-t 6/6] tests/plane_damage: Integrate kernel selftest test-drm_damage_helper
Date: Thu, 11 Oct 2018 11:05:35 +0200	[thread overview]
Message-ID: <20181011090535.GC31561@phenom.ffwll.local> (raw)
In-Reply-To: <20181011002104.1845-6-drawat@vmware.com>

On Wed, Oct 10, 2018 at 05:21:04PM -0700, Deepak Rawat wrote:
> Call kernel selftest module test-drm_damage_helper from igt.
> 
> v2:
> - Add test alphabetically.
> - Add test to meson build.
> 
> Cc: ville.syrjala@linux.intel.com
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: Pekka Paalanen <ppaalanen@gmail.com>
> Cc: Daniel Stone <daniel@fooishbar.org>
> Signed-off-by: Deepak Rawat <drawat@vmware.com>
> ---
>  tests/Makefile.sources    |  1 +
>  tests/drm_plane_damage.c  | 10 ++++++++++
>  tests/igt_command_line.sh |  2 +-
>  tests/meson.build         |  1 +
>  4 files changed, 13 insertions(+), 1 deletion(-)
>  create mode 100644 tests/drm_plane_damage.c
> 
> diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> index 001f1a2b..eae5f39e 100644
> --- a/tests/Makefile.sources
> +++ b/tests/Makefile.sources
> @@ -32,6 +32,7 @@ TESTS_progs = \
>  	debugfs_test \
>  	drm_import_export \
>  	drm_mm \
> +	drm_plane_damage \
>  	drm_read \
>  	drv_getparams_basic \
>  	drv_hangman \
> diff --git a/tests/drm_plane_damage.c b/tests/drm_plane_damage.c
> new file mode 100644
> index 00000000..c2b793cc
> --- /dev/null
> +++ b/tests/drm_plane_damage.c
> @@ -0,0 +1,10 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#include "igt.h"
> +#include "igt_kmod.h"
> +
> +IGT_TEST_DESCRIPTION("Basic sanity check of DRM's plane damage helper iterator.");
> +
> +igt_main
> +{
> +	igt_kselftests("test-drm_damage_helper", NULL, NULL, NULL);
> +}
> diff --git a/tests/igt_command_line.sh b/tests/igt_command_line.sh
> index 8285ba62..621b2cbd 100755
> --- a/tests/igt_command_line.sh
> +++ b/tests/igt_command_line.sh
> @@ -90,7 +90,7 @@ check_test ()
>  		# Subtest enumeration of kernel selftest launchers depends
>  		# on the running kernel. If selftests are not enabled,
>  		# they will output nothing and exit with 0.
> -		if [ "$testname" != "drv_selftest" -a "$testname" != "drm_mm" ]; then
> +		if [ "$testname" != "drv_selftest" -a "$testname" != "drm_mm" -a "$testname" != "drm_plane_damage" ]; then
>  			fail $test
>  		fi
>  	fi
> diff --git a/tests/meson.build b/tests/meson.build
> index 697ff515..5acd7aa2 100644
> --- a/tests/meson.build
> +++ b/tests/meson.build
> @@ -9,6 +9,7 @@ test_progs = [
>  	'debugfs_test',
>  	'drm_import_export',
>  	'drm_mm',
> +	'drm_plane_damage',

For future proofing I think it'd be much better if we call this drm_kms or
similar. The individual subtest results will be all exposed, but there's a
bit a problem when we always have to upgrade both igt and the kernel at
the same time. At least with the current CI infrastructure.

I'm also asking the ARM folks to type selftests for the new block_* format
description stuff, so this will come in handy real soon.
-Daniel

>  	'drm_read',
>  	'drv_getparams_basic',
>  	'drv_hangman',
> -- 
> 2.17.1
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

WARNING: multiple messages have this Message-ID (diff)
From: Daniel Vetter <daniel@ffwll.ch>
To: Deepak Rawat <drawat@vmware.com>
Cc: thellstrom@vmware.com, syeh@vmware.com,
	Daniel Vetter <daniel.vetter@ffwll.ch>,
	intel-gfx@lists.freedesktop.org, igt-dev@lists.freedesktop.org,
	Pekka Paalanen <ppaalanen@gmail.com>,
	linux-graphics-maintainer@vmware.com
Subject: Re: [Intel-gfx] [PATCH i-g-t 6/6] tests/plane_damage: Integrate kernel selftest test-drm_damage_helper
Date: Thu, 11 Oct 2018 11:05:35 +0200	[thread overview]
Message-ID: <20181011090535.GC31561@phenom.ffwll.local> (raw)
In-Reply-To: <20181011002104.1845-6-drawat@vmware.com>

On Wed, Oct 10, 2018 at 05:21:04PM -0700, Deepak Rawat wrote:
> Call kernel selftest module test-drm_damage_helper from igt.
> 
> v2:
> - Add test alphabetically.
> - Add test to meson build.
> 
> Cc: ville.syrjala@linux.intel.com
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: Pekka Paalanen <ppaalanen@gmail.com>
> Cc: Daniel Stone <daniel@fooishbar.org>
> Signed-off-by: Deepak Rawat <drawat@vmware.com>
> ---
>  tests/Makefile.sources    |  1 +
>  tests/drm_plane_damage.c  | 10 ++++++++++
>  tests/igt_command_line.sh |  2 +-
>  tests/meson.build         |  1 +
>  4 files changed, 13 insertions(+), 1 deletion(-)
>  create mode 100644 tests/drm_plane_damage.c
> 
> diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> index 001f1a2b..eae5f39e 100644
> --- a/tests/Makefile.sources
> +++ b/tests/Makefile.sources
> @@ -32,6 +32,7 @@ TESTS_progs = \
>  	debugfs_test \
>  	drm_import_export \
>  	drm_mm \
> +	drm_plane_damage \
>  	drm_read \
>  	drv_getparams_basic \
>  	drv_hangman \
> diff --git a/tests/drm_plane_damage.c b/tests/drm_plane_damage.c
> new file mode 100644
> index 00000000..c2b793cc
> --- /dev/null
> +++ b/tests/drm_plane_damage.c
> @@ -0,0 +1,10 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#include "igt.h"
> +#include "igt_kmod.h"
> +
> +IGT_TEST_DESCRIPTION("Basic sanity check of DRM's plane damage helper iterator.");
> +
> +igt_main
> +{
> +	igt_kselftests("test-drm_damage_helper", NULL, NULL, NULL);
> +}
> diff --git a/tests/igt_command_line.sh b/tests/igt_command_line.sh
> index 8285ba62..621b2cbd 100755
> --- a/tests/igt_command_line.sh
> +++ b/tests/igt_command_line.sh
> @@ -90,7 +90,7 @@ check_test ()
>  		# Subtest enumeration of kernel selftest launchers depends
>  		# on the running kernel. If selftests are not enabled,
>  		# they will output nothing and exit with 0.
> -		if [ "$testname" != "drv_selftest" -a "$testname" != "drm_mm" ]; then
> +		if [ "$testname" != "drv_selftest" -a "$testname" != "drm_mm" -a "$testname" != "drm_plane_damage" ]; then
>  			fail $test
>  		fi
>  	fi
> diff --git a/tests/meson.build b/tests/meson.build
> index 697ff515..5acd7aa2 100644
> --- a/tests/meson.build
> +++ b/tests/meson.build
> @@ -9,6 +9,7 @@ test_progs = [
>  	'debugfs_test',
>  	'drm_import_export',
>  	'drm_mm',
> +	'drm_plane_damage',

For future proofing I think it'd be much better if we call this drm_kms or
similar. The individual subtest results will be all exposed, but there's a
bit a problem when we always have to upgrade both igt and the kernel at
the same time. At least with the current CI infrastructure.

I'm also asking the ARM folks to type selftests for the new block_* format
description stuff, so this will come in handy real soon.
-Daniel

>  	'drm_read',
>  	'drv_getparams_basic',
>  	'drv_hangman',
> -- 
> 2.17.1
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2018-10-11  9:05 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-11  0:20 [PATCH i-g-t 1/6] lib/igt_vmwgfx: Add vmwgfx device Deepak Rawat
2018-10-11  0:20 ` [igt-dev] " Deepak Rawat
2018-10-11  0:21 ` [PATCH i-g-t 2/6] lib/igt_fb: Call dumb_destroy ioctl in case of dumb buffers Deepak Rawat
2018-10-11  0:21   ` [Intel-gfx] " Deepak Rawat
2018-10-11  0:21 ` [PATCH i-g-t 3/6] lib/igt_fb: Check for cairo surface success Deepak Rawat
2018-10-11  0:21   ` [Intel-gfx] " Deepak Rawat
2018-10-11 15:06   ` [igt-dev] " Ville Syrjälä
2018-10-11 15:06     ` Ville Syrjälä
2018-10-11 15:48     ` Deepak Singh Rawat
2018-10-11 15:48       ` Deepak Singh Rawat
2018-10-11  0:21 ` [PATCH i-g-t 4/6] lib: Don't call igt_require_fb_modifiers() when no modifier Deepak Rawat
2018-10-11  0:21   ` [igt-dev] " Deepak Rawat
2018-10-11 14:51   ` Ville Syrjälä
2018-10-11 14:51     ` Ville Syrjälä
2018-10-11 15:38     ` Deepak Singh Rawat
2018-10-11 15:38       ` Deepak Singh Rawat
2018-10-11 15:48       ` Daniel Vetter
2018-10-11 15:48         ` Daniel Vetter
2018-10-11  0:21 ` [PATCH i-g-t 5/6] tests/kms_atomic: Add a new test case for FB_DAMAGE_CLIPS plane property Deepak Rawat
2018-10-11  0:21   ` [Intel-gfx] " Deepak Rawat
2018-10-11  0:21 ` [PATCH i-g-t 6/6] tests/plane_damage: Integrate kernel selftest test-drm_damage_helper Deepak Rawat
2018-10-11  0:21   ` [Intel-gfx] " Deepak Rawat
2018-10-11  9:05   ` Daniel Vetter [this message]
2018-10-11  9:05     ` Daniel Vetter
2018-10-11 15:23     ` Deepak Singh Rawat
2018-10-11 15:23       ` [Intel-gfx] " Deepak Singh Rawat
2018-10-11 15:25       ` Daniel Vetter
2018-10-11 15:25         ` [Intel-gfx] " Daniel Vetter
2018-10-11  9:01 ` [igt-dev] [PATCH i-g-t 1/6] lib/igt_vmwgfx: Add vmwgfx device Daniel Vetter
2018-10-11  9:01   ` Daniel Vetter
2018-10-11  9:11   ` Petri Latvala
2018-10-11  9:11     ` Petri Latvala
2018-10-11  9:46     ` Daniel Vetter
2018-10-11  9:46       ` Daniel Vetter
2018-10-11 15:17   ` Deepak Singh Rawat
2018-10-11 15:17     ` Deepak Singh Rawat
2018-10-11 15:27     ` Daniel Vetter
2018-10-11 15:27       ` Daniel Vetter
2018-10-11 15:32       ` Deepak Singh Rawat
2018-10-11 15:32         ` Deepak Singh Rawat
2018-10-11  9:21 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,1/6] " Patchwork
2018-10-11 14:22 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181011090535.GC31561@phenom.ffwll.local \
    --to=daniel@ffwll.ch \
    --cc=daniel.vetter@ffwll.ch \
    --cc=drawat@vmware.com \
    --cc=igt-dev@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=linux-graphics-maintainer@vmware.com \
    --cc=ppaalanen@gmail.com \
    --cc=syeh@vmware.com \
    --cc=thellstrom@vmware.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.