From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: Dave Gerlach <d-gerlach@ti.com>, Faiz Abbas <faiz_abbas@ti.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Keerthy <j-keerthy@ti.com>, Nishanth Menon <nm@ti.com>,
Peter Ujfalusi <peter.ujfalusi@ti.com>,
Roger Quadros <rogerq@ti.com>, Suman Anna <s-anna@ti.com>,
Tero Kristo <t-kristo@ti.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/8] ARM: dts: Fix flags for gpio7
Date: Tue, 23 Jul 2019 04:28:09 -0700 [thread overview]
Message-ID: <20190723112811.44381-7-tony@atomide.com> (raw)
In-Reply-To: <20190723112811.44381-1-tony@atomide.com>
The ti,no-idle-on-init and ti,no-reset-on-init flags need to be at
the interconnect target module level for the modules that have it
defined. Otherwise we get the following warnings:
dts flag should be at module level for ti,no-idle-on-init
dts flag should be at module level for ti,no-reset-on-init
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 2 +-
arch/arm/boot/dts/dra7-evm.dts | 2 +-
arch/arm/boot/dts/dra7-l4.dtsi | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -379,7 +379,7 @@
};
};
-&gpio7 {
+&gpio7_target {
ti,no-reset-on-init;
ti,no-idle-on-init;
};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -498,7 +498,7 @@
phy-supply = <&ldousb_reg>;
};
-&gpio7 {
+&gpio7_target {
ti,no-reset-on-init;
ti,no-idle-on-init;
};
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1261,7 +1261,7 @@
};
};
- target-module@51000 { /* 0x48051000, ap 45 2e.0 */
+ gpio7_target: target-module@51000 { /* 0x48051000, ap 45 2e.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "gpio7";
reg = <0x51000 0x4>,
--
2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: Nishanth Menon <nm@ti.com>, Tero Kristo <t-kristo@ti.com>,
Dave Gerlach <d-gerlach@ti.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-kernel@vger.kernel.org,
Peter Ujfalusi <peter.ujfalusi@ti.com>,
Faiz Abbas <faiz_abbas@ti.com>, Keerthy <j-keerthy@ti.com>,
linux-arm-kernel@lists.infradead.org,
Roger Quadros <rogerq@ti.com>
Subject: [PATCH 6/8] ARM: dts: Fix flags for gpio7
Date: Tue, 23 Jul 2019 04:28:09 -0700 [thread overview]
Message-ID: <20190723112811.44381-7-tony@atomide.com> (raw)
In-Reply-To: <20190723112811.44381-1-tony@atomide.com>
The ti,no-idle-on-init and ti,no-reset-on-init flags need to be at
the interconnect target module level for the modules that have it
defined. Otherwise we get the following warnings:
dts flag should be at module level for ti,no-idle-on-init
dts flag should be at module level for ti,no-reset-on-init
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 2 +-
arch/arm/boot/dts/dra7-evm.dts | 2 +-
arch/arm/boot/dts/dra7-l4.dtsi | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -379,7 +379,7 @@
};
};
-&gpio7 {
+&gpio7_target {
ti,no-reset-on-init;
ti,no-idle-on-init;
};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -498,7 +498,7 @@
phy-supply = <&ldousb_reg>;
};
-&gpio7 {
+&gpio7_target {
ti,no-reset-on-init;
ti,no-idle-on-init;
};
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1261,7 +1261,7 @@
};
};
- target-module@51000 { /* 0x48051000, ap 45 2e.0 */
+ gpio7_target: target-module@51000 { /* 0x48051000, ap 45 2e.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "gpio7";
reg = <0x51000 0x4>,
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-07-23 11:28 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-23 11:28 [PATCH 0/8] ti-sysc related warning fixes for v5.3-rc cycle Tony Lindgren
2019-07-23 11:28 ` Tony Lindgren
2019-07-23 11:28 ` [PATCH 1/8] ARM: OMAP2+: Fix missing SYSC_HAS_RESET_STATUS for dra7 epwmss Tony Lindgren
2019-07-23 11:28 ` Tony Lindgren
2019-07-23 11:28 ` Tony Lindgren
2019-07-23 18:16 ` Suman Anna
2019-07-23 18:16 ` Suman Anna
2019-07-23 18:16 ` Suman Anna
2019-07-23 11:28 ` [PATCH 2/8] ARM: OMAP2+: Remove unconfigured midlemode for am3 lcdc Tony Lindgren
2019-07-23 11:28 ` Tony Lindgren
2019-07-23 19:03 ` Suman Anna
2019-07-23 19:03 ` Suman Anna
2019-07-23 19:03 ` Suman Anna
2019-07-24 5:50 ` Keerthy
2019-07-24 5:50 ` Keerthy
2019-07-24 5:50 ` Keerthy
2019-07-24 6:31 ` Tony Lindgren
2019-07-24 6:31 ` Tony Lindgren
2019-07-24 18:28 ` Suman Anna
2019-07-24 18:28 ` Suman Anna
2019-07-24 18:28 ` Suman Anna
2019-08-13 10:47 ` Tony Lindgren
2019-08-13 10:47 ` Tony Lindgren
2019-08-13 10:47 ` Tony Lindgren
2019-08-13 11:04 ` Jyri Sarha
2019-08-13 11:04 ` Jyri Sarha
2019-08-13 11:04 ` Jyri Sarha
2019-08-13 11:29 ` Tony Lindgren
2019-08-13 11:29 ` Tony Lindgren
2019-07-23 11:28 ` [PATCH 3/8] bus: ti-sysc: Fix handling of forced idle Tony Lindgren
2019-07-23 11:28 ` Tony Lindgren
2019-07-23 18:31 ` Suman Anna
2019-07-23 18:31 ` Suman Anna
2019-07-23 18:31 ` Suman Anna
2019-07-23 11:28 ` [PATCH 4/8] bus: ti-sysc: Fix using configured sysc mask value Tony Lindgren
2019-07-23 11:28 ` Tony Lindgren
2019-07-23 11:28 ` [PATCH 5/8] ARM: dts: Drop bogus ahclkr clocks for dra7 mcasp 3 to 8 Tony Lindgren
2019-07-23 11:28 ` Tony Lindgren
2019-07-23 21:01 ` Suman Anna
2019-07-23 21:01 ` Suman Anna
2019-07-23 21:01 ` Suman Anna
2019-07-24 6:47 ` Tony Lindgren
2019-07-24 6:47 ` Tony Lindgren
2019-09-17 7:21 ` Tero Kristo
2019-09-17 7:21 ` Tero Kristo
2019-09-17 7:21 ` Tero Kristo
2019-09-18 15:51 ` Tony Lindgren
2019-09-18 15:51 ` Tony Lindgren
2019-07-23 11:28 ` Tony Lindgren [this message]
2019-07-23 11:28 ` [PATCH 6/8] ARM: dts: Fix flags for gpio7 Tony Lindgren
2019-07-23 21:58 ` Suman Anna
2019-07-23 21:58 ` Suman Anna
2019-07-23 21:58 ` Suman Anna
2019-07-23 11:28 ` [PATCH 7/8] ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7 Tony Lindgren
2019-07-23 11:28 ` Tony Lindgren
2019-07-23 11:28 ` [PATCH 8/8] ARM: dts: Fix lcdc sysc flags for am3 Tony Lindgren
2019-07-23 11:28 ` Tony Lindgren
2019-07-24 5:52 ` [PATCH 0/8] ti-sysc related warning fixes for v5.3-rc cycle Keerthy
2019-07-24 5:52 ` Keerthy
2019-07-24 5:52 ` Keerthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190723112811.44381-7-tony@atomide.com \
--to=tony@atomide.com \
--cc=d-gerlach@ti.com \
--cc=faiz_abbas@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=j-keerthy@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=peter.ujfalusi@ti.com \
--cc=rogerq@ti.com \
--cc=s-anna@ti.com \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.