From: Marco Felsch <m.felsch@pengutronix.de> To: Andreas Kemnade <andreas@kemnade.info> Cc: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com, manivannan.sadhasivam@linaro.org, andrew.smirnov@gmail.com, marex@denx.de, angus@akkea.ca, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, j.neuschaefer@gmx.net, Discussions about the Letux Kernel <letux-kernel@openphoenux.org> Subject: Re: [PATCH v3 2/3] ARM: dts: add Netronix E60K02 board common file Date: Fri, 11 Oct 2019 08:56:09 +0200 [thread overview] Message-ID: <20191011065609.6irap7elicatmsgg@pengutronix.de> (raw) In-Reply-To: <20191010192357.27884-3-andreas@kemnade.info> Hi Andreas, On 19-10-10 21:23, Andreas Kemnade wrote: > The Netronix board E60K02 can be found some several Ebook-Readers, > at least the Kobo Clara HD and the Tolino Shine 3. The board > is equipped with different SoCs requiring different pinmuxes. > > For now the following peripherals are included: > - LED > - Power Key > - Cover (gpio via hall sensor) > - RC5T619 PMIC (the kernel misses support for rtc and charger > subdevices). > - Backlight via lm3630a > - Wifi sdio chip detection (mmc-powerseq and stuff) > > It is based on vendor kernel but heavily reworked due to many > changed bindings. > > Signed-off-by: Andreas Kemnade <andreas@kemnade.info> > --- > Changes in v3: > - better led name > - correct memory size > - comments about missing devices > > Changes in v2: > - reordered, was 1/3 > - moved pinmuxes to their actual users, not the parents > of them > - removed some already-disabled stuff > - minor cleanups You won't change the muxing, so a this dtsi can be self contained? Regards, Marco > backligt dependencies: > module autoloading: > https://patchwork.kernel.org/patch/11139987/ > enable-gpios property (accepted and acked): > https://patchwork.kernel.org/patch/11143795/ > > arch/arm/boot/dts/e60k02.dtsi | 337 ++++++++++++++++++++++++++++++++++ > 1 file changed, 337 insertions(+) > create mode 100644 arch/arm/boot/dts/e60k02.dtsi > > diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi > new file mode 100644 > index 0000000000000..84c0447b9a1bd > --- /dev/null > +++ b/arch/arm/boot/dts/e60k02.dtsi > @@ -0,0 +1,337 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright 2019 Andreas Kemnade > + * based on works > + * Copyright 2016 Freescale Semiconductor, Inc. > + * and > + * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd > + * > + * Netronix E60K02 board common. > + * This board is equipped with different SoCs and > + * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and > + * the Tolino Shine 3 (with i.MX6SL) > + */ > +#include <dt-bindings/input/input.h> > + > +/ { > + > + chosen { > + stdout-path = &uart1; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_keys>; > + power { > + label = "Power"; > + gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_POWER>; > + gpio-key,wakeup; > + }; > + cover { > + label = "Cover"; > + gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; > + linux,code = <SW_LID>; > + linux,input-type = <EV_SW>; > + gpio-key,wakeup; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_led>; > + > + on { > + label = "e60k02:white:on"; > + gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; > + linux,default-trigger = "timer"; > + }; > + }; > + > + memory { > + reg = <0x80000000 0x20000000>; > + }; > + > + reg_wifi: regulator-wifi { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wifi_power>; > + regulator-name = "SD3_SPWR"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + > + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + }; > + > + wifi_pwrseq: wifi_pwrseq { > + compatible = "mmc-pwrseq-simple"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wifi_reset>; > + post-power-on-delay-ms = <20>; > + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; > + }; > + > +}; > + > + > +&i2c1 { > + clock-frequency = <100000>; > + pinctrl-names = "default","sleep"; > + pinctrl-0 = <&pinctrl_i2c1>; > + pinctrl-1 = <&pinctrl_i2c1_sleep>; > + status = "okay"; > + > + lm3630a: backlight@36 { > + reg = <0x36>; > + > + compatible = "ti,lm3630a"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>; > + enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + led@0 { > + reg = <0>; > + led-sources = <0>; > + label = "backlight_warm"; > + default-brightness = <0>; > + max-brightness = <255>; > + }; > + > + led@1 { > + reg = <1>; > + led-sources = <1>; > + label = "backlight_cold"; > + default-brightness = <0>; > + max-brightness = <255>; > + }; > + > + }; > +}; > + > +&i2c2 { > + clock-frequency = <100000>; > + pinctrl-names = "default","sleep"; > + pinctrl-0 = <&pinctrl_i2c2>; > + pinctrl-1 = <&pinctrl_i2c2_sleep>; > + status = "okay"; > + > + /* TODO: CYTTSP5 touch controller at 0x24 */ > + > + /* TODO: TPS65185 PMIC for E Ink at 0x68 */ > + > +}; > + > +&i2c3 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c3>; > + status = "okay"; > + > + ricoh619: pmic@32 { > + compatible = "ricoh,rc5t619"; > + reg = <0x32>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ricoh_gpio>; > + system-power-controller; > + > + regulators { > + dcdc1_reg: DCDC1 { > + regulator-name = "DCDC1"; > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1875000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-max-microvolt = <900000>; > + regulator-suspend-min-microvolt = <900000>; > + }; > + }; > + > + /* Core3_3V3 */ > + dcdc2_reg: DCDC2 { > + regulator-name = "DCDC2"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-max-microvolt = <3300000>; > + regulator-suspend-min-microvolt = <3300000>; > + }; > + }; > + > + dcdc3_reg: DCDC3 { > + regulator-name = "DCDC3"; > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1875000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-max-microvolt = <1140000>; > + regulator-suspend-min-microvolt = <1140000>; > + }; > + }; > + > + /* Core4_1V2 */ > + dcdc4_reg: DCDC4 { > + regulator-name = "DCDC4"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-max-microvolt = <1140000>; > + regulator-suspend-min-microvolt = <1140000>; > + }; > + }; > + > + /* Core4_1V8 */ > + dcdc5_reg: DCDC5 { > + regulator-name = "DCDC5"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-max-microvolt = <1700000>; > + regulator-suspend-min-microvolt = <1700000>; > + }; > + }; > + > + /* IR_3V3 */ > + ldo1_reg: LDO1 { > + regulator-name = "LDO1"; > + regulator-boot-on; > + }; > + > + /* Core1_3V3 */ > + ldo2_reg: LDO2 { > + regulator-name = "LDO2"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-max-microvolt = <3000000>; > + regulator-suspend-min-microvolt = <3000000>; > + }; > + }; > + > + /* Core5_1V2 */ > + ldo3_reg: LDO3 { > + regulator-name = "LDO3"; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo4_reg: LDO4 { > + regulator-name = "LDO4"; > + regulator-boot-on; > + }; > + > + /* SPD_3V3 */ > + ldo5_reg: LDO5 { > + regulator-name = "LDO5"; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + /* DDR_0V6 */ > + ldo6_reg: LDO6 { > + regulator-name = "LDO6"; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + /* VDD_PWM */ > + ldo7_reg: LDO7 { > + regulator-name = "LDO7"; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + /* ldo_1v8 */ > + ldo8_reg: LDO8 { > + regulator-name = "LDO8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo9_reg: LDO9 { > + regulator-name = "LDO9"; > + regulator-boot-on; > + }; > + > + ldo10_reg: LDO10 { > + regulator-name = "LDO10"; > + regulator-boot-on; > + }; > + > + ldortc1_reg: LDORTC1 { > + regulator-name = "LDORTC1"; > + regulator-boot-on; > + }; > + > + ldortc2_reg: LDORTC2 { > + regulator-name = "LDORTC2"; > + regulator-boot-on; > + }; > + }; > + > + }; > + > +}; > + > +&snvs_rtc { > + /* we are using the rtc in the pmic, not disabled imx6sll.dtsi */ > + status = "disabled"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + status = "okay"; > +}; > + > +&usdhc2 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; > + pinctrl-0 = <&pinctrl_usdhc2>; > + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; > + pinctrl-3 = <&pinctrl_usdhc2_sleep>; > + non-removable; > + status = "okay"; > +}; > + > +&usdhc3 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; > + pinctrl-3 = <&pinctrl_usdhc3_sleep>; > + vmmc-supply = <®_wifi>; > + mmc-pwrseq = <&wifi_pwrseq>; > + cap-power-off-card; > + non-removable; > + status = "okay"; > +}; > + > +&usbotg1 { > + pinctrl-names = "default"; > + disable-over-current; > + srp-disable; > + hnp-disable; > + adp-disable; > + status = "okay"; > +}; > -- > 2.20.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
WARNING: multiple messages have this Message-ID (diff)
From: Marco Felsch <m.felsch@pengutronix.de> To: Andreas Kemnade <andreas@kemnade.info> Cc: mark.rutland@arm.com, marex@denx.de, devicetree@vger.kernel.org, andrew.smirnov@gmail.com, shawnguo@kernel.org, s.hauer@pengutronix.de, angus@akkea.ca, linux-kernel@vger.kernel.org, j.neuschaefer@gmx.net, robh+dt@kernel.org, linux-imx@nxp.com, kernel@pengutronix.de, manivannan.sadhasivam@linaro.org, Discussions about the Letux Kernel <letux-kernel@openphoenux.org>, festevam@gmail.com, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH v3 2/3] ARM: dts: add Netronix E60K02 board common file Date: Fri, 11 Oct 2019 08:56:09 +0200 [thread overview] Message-ID: <20191011065609.6irap7elicatmsgg@pengutronix.de> (raw) In-Reply-To: <20191010192357.27884-3-andreas@kemnade.info> Hi Andreas, On 19-10-10 21:23, Andreas Kemnade wrote: > The Netronix board E60K02 can be found some several Ebook-Readers, > at least the Kobo Clara HD and the Tolino Shine 3. The board > is equipped with different SoCs requiring different pinmuxes. > > For now the following peripherals are included: > - LED > - Power Key > - Cover (gpio via hall sensor) > - RC5T619 PMIC (the kernel misses support for rtc and charger > subdevices). > - Backlight via lm3630a > - Wifi sdio chip detection (mmc-powerseq and stuff) > > It is based on vendor kernel but heavily reworked due to many > changed bindings. > > Signed-off-by: Andreas Kemnade <andreas@kemnade.info> > --- > Changes in v3: > - better led name > - correct memory size > - comments about missing devices > > Changes in v2: > - reordered, was 1/3 > - moved pinmuxes to their actual users, not the parents > of them > - removed some already-disabled stuff > - minor cleanups You won't change the muxing, so a this dtsi can be self contained? Regards, Marco > backligt dependencies: > module autoloading: > https://patchwork.kernel.org/patch/11139987/ > enable-gpios property (accepted and acked): > https://patchwork.kernel.org/patch/11143795/ > > arch/arm/boot/dts/e60k02.dtsi | 337 ++++++++++++++++++++++++++++++++++ > 1 file changed, 337 insertions(+) > create mode 100644 arch/arm/boot/dts/e60k02.dtsi > > diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi > new file mode 100644 > index 0000000000000..84c0447b9a1bd > --- /dev/null > +++ b/arch/arm/boot/dts/e60k02.dtsi > @@ -0,0 +1,337 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright 2019 Andreas Kemnade > + * based on works > + * Copyright 2016 Freescale Semiconductor, Inc. > + * and > + * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd > + * > + * Netronix E60K02 board common. > + * This board is equipped with different SoCs and > + * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and > + * the Tolino Shine 3 (with i.MX6SL) > + */ > +#include <dt-bindings/input/input.h> > + > +/ { > + > + chosen { > + stdout-path = &uart1; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_keys>; > + power { > + label = "Power"; > + gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_POWER>; > + gpio-key,wakeup; > + }; > + cover { > + label = "Cover"; > + gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; > + linux,code = <SW_LID>; > + linux,input-type = <EV_SW>; > + gpio-key,wakeup; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_led>; > + > + on { > + label = "e60k02:white:on"; > + gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; > + linux,default-trigger = "timer"; > + }; > + }; > + > + memory { > + reg = <0x80000000 0x20000000>; > + }; > + > + reg_wifi: regulator-wifi { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wifi_power>; > + regulator-name = "SD3_SPWR"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + > + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + }; > + > + wifi_pwrseq: wifi_pwrseq { > + compatible = "mmc-pwrseq-simple"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wifi_reset>; > + post-power-on-delay-ms = <20>; > + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; > + }; > + > +}; > + > + > +&i2c1 { > + clock-frequency = <100000>; > + pinctrl-names = "default","sleep"; > + pinctrl-0 = <&pinctrl_i2c1>; > + pinctrl-1 = <&pinctrl_i2c1_sleep>; > + status = "okay"; > + > + lm3630a: backlight@36 { > + reg = <0x36>; > + > + compatible = "ti,lm3630a"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>; > + enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + led@0 { > + reg = <0>; > + led-sources = <0>; > + label = "backlight_warm"; > + default-brightness = <0>; > + max-brightness = <255>; > + }; > + > + led@1 { > + reg = <1>; > + led-sources = <1>; > + label = "backlight_cold"; > + default-brightness = <0>; > + max-brightness = <255>; > + }; > + > + }; > +}; > + > +&i2c2 { > + clock-frequency = <100000>; > + pinctrl-names = "default","sleep"; > + pinctrl-0 = <&pinctrl_i2c2>; > + pinctrl-1 = <&pinctrl_i2c2_sleep>; > + status = "okay"; > + > + /* TODO: CYTTSP5 touch controller at 0x24 */ > + > + /* TODO: TPS65185 PMIC for E Ink at 0x68 */ > + > +}; > + > +&i2c3 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c3>; > + status = "okay"; > + > + ricoh619: pmic@32 { > + compatible = "ricoh,rc5t619"; > + reg = <0x32>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ricoh_gpio>; > + system-power-controller; > + > + regulators { > + dcdc1_reg: DCDC1 { > + regulator-name = "DCDC1"; > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1875000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-max-microvolt = <900000>; > + regulator-suspend-min-microvolt = <900000>; > + }; > + }; > + > + /* Core3_3V3 */ > + dcdc2_reg: DCDC2 { > + regulator-name = "DCDC2"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-max-microvolt = <3300000>; > + regulator-suspend-min-microvolt = <3300000>; > + }; > + }; > + > + dcdc3_reg: DCDC3 { > + regulator-name = "DCDC3"; > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1875000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-max-microvolt = <1140000>; > + regulator-suspend-min-microvolt = <1140000>; > + }; > + }; > + > + /* Core4_1V2 */ > + dcdc4_reg: DCDC4 { > + regulator-name = "DCDC4"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-max-microvolt = <1140000>; > + regulator-suspend-min-microvolt = <1140000>; > + }; > + }; > + > + /* Core4_1V8 */ > + dcdc5_reg: DCDC5 { > + regulator-name = "DCDC5"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-max-microvolt = <1700000>; > + regulator-suspend-min-microvolt = <1700000>; > + }; > + }; > + > + /* IR_3V3 */ > + ldo1_reg: LDO1 { > + regulator-name = "LDO1"; > + regulator-boot-on; > + }; > + > + /* Core1_3V3 */ > + ldo2_reg: LDO2 { > + regulator-name = "LDO2"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-max-microvolt = <3000000>; > + regulator-suspend-min-microvolt = <3000000>; > + }; > + }; > + > + /* Core5_1V2 */ > + ldo3_reg: LDO3 { > + regulator-name = "LDO3"; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo4_reg: LDO4 { > + regulator-name = "LDO4"; > + regulator-boot-on; > + }; > + > + /* SPD_3V3 */ > + ldo5_reg: LDO5 { > + regulator-name = "LDO5"; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + /* DDR_0V6 */ > + ldo6_reg: LDO6 { > + regulator-name = "LDO6"; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + /* VDD_PWM */ > + ldo7_reg: LDO7 { > + regulator-name = "LDO7"; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + /* ldo_1v8 */ > + ldo8_reg: LDO8 { > + regulator-name = "LDO8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo9_reg: LDO9 { > + regulator-name = "LDO9"; > + regulator-boot-on; > + }; > + > + ldo10_reg: LDO10 { > + regulator-name = "LDO10"; > + regulator-boot-on; > + }; > + > + ldortc1_reg: LDORTC1 { > + regulator-name = "LDORTC1"; > + regulator-boot-on; > + }; > + > + ldortc2_reg: LDORTC2 { > + regulator-name = "LDORTC2"; > + regulator-boot-on; > + }; > + }; > + > + }; > + > +}; > + > +&snvs_rtc { > + /* we are using the rtc in the pmic, not disabled imx6sll.dtsi */ > + status = "disabled"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + status = "okay"; > +}; > + > +&usdhc2 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; > + pinctrl-0 = <&pinctrl_usdhc2>; > + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; > + pinctrl-3 = <&pinctrl_usdhc2_sleep>; > + non-removable; > + status = "okay"; > +}; > + > +&usdhc3 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; > + pinctrl-3 = <&pinctrl_usdhc3_sleep>; > + vmmc-supply = <®_wifi>; > + mmc-pwrseq = <&wifi_pwrseq>; > + cap-power-off-card; > + non-removable; > + status = "okay"; > +}; > + > +&usbotg1 { > + pinctrl-names = "default"; > + disable-over-current; > + srp-disable; > + hnp-disable; > + adp-disable; > + status = "okay"; > +}; > -- > 2.20.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-10-11 6:56 UTC|newest] Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-10-10 19:23 [PATCH v3 0/3] dts: ARM: add Kobo Clara HD eBook reader Andreas Kemnade 2019-10-10 19:23 ` Andreas Kemnade 2019-10-10 19:23 ` Andreas Kemnade 2019-10-10 19:23 ` [PATCH v3 1/3] dt-bindings: arm: fsl: add compatible string for Kobo Clara HD Andreas Kemnade 2019-10-10 19:23 ` Andreas Kemnade 2019-10-10 19:23 ` Andreas Kemnade 2019-10-11 14:29 ` Rob Herring 2019-10-11 14:29 ` Rob Herring 2019-10-11 14:29 ` Rob Herring 2019-10-10 19:23 ` [PATCH v3 2/3] ARM: dts: add Netronix E60K02 board common file Andreas Kemnade 2019-10-10 19:23 ` Andreas Kemnade 2019-10-10 19:23 ` Andreas Kemnade 2019-10-11 6:56 ` Marco Felsch [this message] 2019-10-11 6:56 ` Marco Felsch 2019-10-11 6:56 ` Marco Felsch 2019-10-11 7:41 ` Andreas Kemnade 2019-10-11 7:41 ` Andreas Kemnade 2019-10-11 7:41 ` Andreas Kemnade 2019-10-11 14:29 ` Rob Herring 2019-10-11 14:29 ` Rob Herring 2019-10-11 14:29 ` Rob Herring 2019-10-11 15:05 ` Andreas Kemnade 2019-10-11 15:05 ` Andreas Kemnade 2019-10-11 15:05 ` Andreas Kemnade 2019-10-11 15:22 ` Marco Felsch 2019-10-11 15:22 ` Marco Felsch 2019-10-11 15:22 ` Marco Felsch 2019-10-11 16:19 ` Andreas Kemnade 2019-10-11 16:19 ` Andreas Kemnade 2019-10-11 16:19 ` Andreas Kemnade 2019-10-11 16:56 ` Marco Felsch 2019-10-11 16:56 ` Marco Felsch 2019-10-11 16:56 ` Marco Felsch 2019-10-13 15:56 ` Andreas Kemnade 2019-10-13 15:56 ` Andreas Kemnade 2019-10-13 15:56 ` Andreas Kemnade 2019-10-25 9:14 ` Shawn Guo 2019-10-25 9:14 ` Shawn Guo 2019-10-25 10:09 ` Andreas Kemnade 2019-10-25 10:09 ` Andreas Kemnade 2019-10-25 13:06 ` Shawn Guo 2019-10-25 13:06 ` Shawn Guo 2019-10-10 19:23 ` [PATCH v3 3/3] ARM: dts: imx: add devicetree for Kobo Clara HD Andreas Kemnade 2019-10-10 19:23 ` Andreas Kemnade 2019-10-10 19:23 ` Andreas Kemnade 2019-10-25 13:46 ` Shawn Guo 2019-10-25 13:46 ` Shawn Guo 2019-10-25 18:07 ` Andreas Kemnade 2019-10-25 18:07 ` Andreas Kemnade 2019-10-26 8:12 ` Shawn Guo 2019-10-26 8:12 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191011065609.6irap7elicatmsgg@pengutronix.de \ --to=m.felsch@pengutronix.de \ --cc=andreas@kemnade.info \ --cc=andrew.smirnov@gmail.com \ --cc=angus@akkea.ca \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=j.neuschaefer@gmx.net \ --cc=kernel@pengutronix.de \ --cc=letux-kernel@openphoenux.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=manivannan.sadhasivam@linaro.org \ --cc=marex@denx.de \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.