From: Changming Huang <jerry.huang@nxp.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v2 0/9] new board ls1028ardb introduced
Date: Thu, 21 Nov 2019 18:23:14 +0800 [thread overview]
Message-ID: <20191121102324.35225-1-jerry.huang@nxp.com> (raw)
changes since v1:
1> According to the feedback from other guys, modify the codes
2> create one new patch to move package/rcw to package/freescale-qoriq/
patches detail in v2:
0001-xxxx: is 0005-xxxx in v1, don't change
0002-xxxx: new patch to move rcw to sub-direcotry "freescale-qoriq"
0003-xxxx: is 0001-xxxx in v1, add-back license hash
0004-xxxx: is 0002-xxxx in v1, add option BR2_PACKAGE_HOST_RCW_ATF
0005-xxxx: is 0003-xxxx in v1, add option BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE
0006-xxxx: is 0004-xxxx in v1, use BR2_PACKAGE_HOST_RCW_ATF ATF
0007-xxxx: is 0006-xxxx in v1, rename to fsl-qoriq-cadence-dp-fw,
use the "fsl" to replace freescale, fw to replace firmware,
update DEVELOPERS
add license hash
rewrite makefile
0008-xxxx: is 0007-xxxx in v1, change to unconditional for patches
0009-xxxx: is 0008-xxxx in v1, use BR2_PACKAGE_FSL_QORIQ_CADENCE_DP_FW to DP
0010-xxxx: is 0009-xxxx in v1, add new options
---
The following nine patches is to enable LS1028ARDB board in Buildroot.
NXP LS1028A silicon is based on Arm A72 core and designed for industry,
some key features are enabled:
TSN - Time Sensitive Network on Network interface
TSN/Swith - naive TSN Swith, support six ports
DP - display port for different resolution up to 4K
The base for these patches is "next" branch, commitID: 5fd8db02ef
1. Upgrade the RCW version to latest version supported via LSDK-19.09
2. Use RCW binary for boot board
3. Intruduce u-boot-dtb.bin for NXP Layerscape serial platform
4. Introduce RCW to Arm-trusted-firmware
5. Create one freescale-qoriq direcotry for all firmware hardware related
6. LS1028ARDB DP firmware is stored in freescale-qoriq
7. New patches to eanble GPIO interrupt for eNETC and Micro-bus
8. One standard directory for all Layerscape platform
9. LS1028ARDB related scripts and default configurations
Signed-off-by: Changming Huang <jerry.huang@nxp.com>
---
next reply other threads:[~2019-11-21 10:23 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-21 10:23 Changming Huang [this message]
2019-11-21 10:23 ` [Buildroot] [PATCH v2 01/10] package/freescale-qoriq: new package directory Changming Huang
2019-11-25 21:13 ` Thomas Petazzoni
2019-11-26 2:49 ` [Buildroot] [EXT] " Jerry Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 02/10] package/freescale-qoriq/fsl-qoriq-rcw: move rcw into freescale-qoriq and rename it Changming Huang
2019-11-21 10:34 ` Michael Walle
2019-11-21 10:42 ` [Buildroot] [EXT] " Jerry Huang
2019-11-25 21:15 ` [Buildroot] " Thomas Petazzoni
2019-11-26 3:25 ` [Buildroot] [EXT] " Jerry Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 03/10] package/freescale-qoriq/fsl-qoriq-rcw: upgrade the rcw version to LSDK-19.09 Changming Huang
2019-11-25 21:17 ` Thomas Petazzoni
2019-11-26 3:51 ` [Buildroot] [EXT] " Jerry Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 04/10] package/freescale-qoriq/fsl-qoriq-rcw: add target rcw binary support Changming Huang
2019-11-25 21:23 ` Thomas Petazzoni
2019-11-26 4:33 ` [Buildroot] [EXT] " Jerry Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 05/10] boot/arm-trusted-firmware: Add option BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE Changming Huang
2019-11-22 9:11 ` Sergey Matyukevich
2019-11-22 9:24 ` [Buildroot] [EXT] " Jerry Huang
2019-11-25 21:59 ` [Buildroot] " Thomas Petazzoni
2019-11-21 10:23 ` [Buildroot] [PATCH v2 06/10] boot/arm-trusted-firmware: Add RCW support Changming Huang
2019-11-22 9:19 ` Sergey Matyukevich
2019-11-22 9:31 ` [Buildroot] [EXT] " Jerry Huang
2019-11-25 22:09 ` [Buildroot] " Thomas Petazzoni
2019-11-26 7:06 ` [Buildroot] [EXT] " Jerry Huang
2019-11-26 7:34 ` Jerry Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 07/10] package/freescale-qoriq/fsl-qoriq-cadence-dp-fw: new package Changming Huang
2019-11-21 10:42 ` Michael Walle
2019-11-21 11:04 ` [Buildroot] [EXT] " Jerry Huang
2019-11-22 10:41 ` Jerry Huang
2019-11-21 10:51 ` [Buildroot] " Michael Walle
2019-11-21 11:09 ` [Buildroot] [EXT] " Jerry Huang
2019-11-22 10:40 ` Jerry Huang
2019-11-22 11:00 ` Michael Walle
2019-11-25 2:40 ` Jerry Huang
2019-11-22 11:05 ` Thomas Petazzoni
2019-11-25 6:25 ` Jerry Huang
2019-11-25 22:12 ` [Buildroot] " Thomas Petazzoni
2019-11-26 8:09 ` [Buildroot] [EXT] " Jerry Huang
2019-11-26 9:21 ` Michael Walle
2019-11-26 10:13 ` Jerry Huang
2019-11-26 9:29 ` Michael Walle
2019-11-26 10:12 ` Thomas Petazzoni
2019-11-26 10:31 ` Michael Walle
2019-11-26 12:10 ` Jerry Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 08/10] package/freescale-qoriq/fsl-qoriq-rcw:Enable IIC5_PMUX and CLK_OUT_PMUX for GPIO Changming Huang
2019-11-25 22:13 ` Thomas Petazzoni
2019-11-26 8:15 ` [Buildroot] [EXT] " Jerry Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 09/10] board/freescale/common/ls: Add standard post image script for Layerscape processors Changming Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 10/10] configs/freescale_ls1028ardb*: new board Changming Huang
2019-11-25 22:17 ` Thomas Petazzoni
2019-11-26 12:02 ` [Buildroot] [EXT] " Jerry Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191121102324.35225-1-jerry.huang@nxp.com \
--to=jerry.huang@nxp.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.