[Buildroot] [EXT] Re: [PATCH v2 07/10] package/freescale-qoriq/fsl-qoriq-cadence-dp-fw: new package

[Jerry Huang <jerry.huang@nxp.com>]

Best Regards
Jerry Huang

> -----Original Message-----
> From: Michael Walle <michael@walle.cc>
> Sent: Tuesday, November 26, 2019 5:22 PM
> To: Jerry Huang <jerry.huang@nxp.com>
> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>;
> buildroot at busybox.net; matthew.weber at collins.com; geomatsi at gmail.com
> Subject: Re: [EXT] Re: [Buildroot] [PATCH v2 07/10]
> package/freescale-qoriq/fsl-qoriq-cadence-dp-fw: new package
> 
> Caution: EXT Email
> 
> Am 2019-11-26 09:09, schrieb Jerry Huang:
> > Best Regards
> > Jerry Huang
> >
> >> -----Original Message-----
> >> From: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
> >> Sent: Tuesday, November 26, 2019 6:12 AM
> >> To: Jerry Huang <jerry.huang@nxp.com>
> >> Cc: buildroot at busybox.net; michael at walle.cc;
> >> matthew.weber at collins.com; geomatsi at gmail.com
> >> Subject: [EXT] Re: [Buildroot] [PATCH v2 07/10]
> >> package/freescale-qoriq/fsl-qoriq-cadence-dp-fw: new package
> >>
> >> Caution: EXT Email
> >>
> >> Hello,
> >>
> >> On Thu, 21 Nov 2019 18:23:21 +0800
> >> Changming Huang <jerry.huang@nxp.com> wrote:
> >>
> >> > From: Jerry Huang <jerry.huang@nxp.com>
> >> >
> >> > This package provides the firmware for LS1028ARDB DP (display port).
> >> >
> >> > Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
> >>
> >> Overall, looks pretty good. Rename to nxp-qoriq-... if you decide to
> >> use the nxp branding.
> > Sure, I will rename it.
> >
> >> > diff --git a/DEVELOPERS b/DEVELOPERS
> >> > index 9fbe229eb7..b15115f507 100644
> >> > --- a/DEVELOPERS
> >> > +++ b/DEVELOPERS
> >> > @@ -2545,3 +2545,6 @@ F:      package/qjson/
> >> >  F:   package/quazip/
> >> >  F:   package/shapelib/
> >> >  F:   package/tinc/
> >> > +
> >> > +N:   Changming Huang <jerry.huang@nxp.com>
> >>
> >> Please sort your name at the right place in the DEVELOPERS file
> >> (alphabetic
> >> ordering).
> > sure
> >
> >> > diff --git a/package/freescale-qoriq/fsl-qoriq-cadence-dp-fw/Config.in
> >> > b/package/freescale-qoriq/fsl-qoriq-cadence-dp-fw/Config.in
> >> > new file mode 100644
> >> > index 0000000000..9259776750
> >> > --- /dev/null
> >> > +++ b/package/freescale-qoriq/fsl-qoriq-cadence-dp-fw/Config.in
> >> > @@ -0,0 +1,5 @@
> >> > +config BR2_PACKAGE_FSL_QORIQ_CADENCE_DP_FW
> >> > +     bool "FSL QorIQ cadence DP firmware"
> >>
> >> Just:
> >>
> >>         bool "fsl-qorirq-cadence-dp-fw
> > Sure,
> 
> Sorry about being so pedantic about this.. but like I said before,
> almost all (there is one exception, "murata-cyw-fw") firmware packages
> have a -firmware suffix.
Yes, it has been changed to " qoriq-cadence-dp-firmware " in v3

> -michael