All of lore.kernel.org
 help / color / mirror / Atom feed
From: Changming Huang <jerry.huang@nxp.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v2 08/10] package/freescale-qoriq/fsl-qoriq-rcw:Enable IIC5_PMUX and CLK_OUT_PMUX for GPIO
Date: Thu, 21 Nov 2019 18:23:22 +0800	[thread overview]
Message-ID: <20191121102324.35225-9-jerry.huang@nxp.com> (raw)
In-Reply-To: <20191121102324.35225-1-jerry.huang@nxp.com>

From: Jerry Huang <jerry.huang@nxp.com>

Because GPIO is used as interrupt for eNETC PHY and Micro-bus,
IIC5_PMUX and CLK_OUT_PMUX are enabled for GPIO.

Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
---
changes sinve v1:
1. change to unconditional for these two patches
---
 ...b-Enable-IIC5_PMUX-for-GPIO-function.patch | 42 +++++++++++++++++++
 ...nable-CLK_OUT_PMUX-for-GPIO-function.patch | 40 ++++++++++++++++++
 2 files changed, 82 insertions(+)
 create mode 100644 package/freescale-qoriq/fsl-qoriq-rcw/0001-ls1028ardb-Enable-IIC5_PMUX-for-GPIO-function.patch
 create mode 100644 package/freescale-qoriq/fsl-qoriq-rcw/0002-ls1028ardb-Enable-CLK_OUT_PMUX-for-GPIO-function.patch

diff --git a/package/freescale-qoriq/fsl-qoriq-rcw/0001-ls1028ardb-Enable-IIC5_PMUX-for-GPIO-function.patch b/package/freescale-qoriq/fsl-qoriq-rcw/0001-ls1028ardb-Enable-IIC5_PMUX-for-GPIO-function.patch
new file mode 100644
index 0000000000..21c6c84cbd
--- /dev/null
+++ b/package/freescale-qoriq/fsl-qoriq-rcw/0001-ls1028ardb-Enable-IIC5_PMUX-for-GPIO-function.patch
@@ -0,0 +1,42 @@
+From 33b403cee1fa215927bc65dc14baf35a2fdbe7b3 Mon Sep 17 00:00:00 2001
+From: Jerry Huang <jerry.huang@nxp.com>
+Date: Thu, 19 Sep 2019 12:12:20 +0800
+Subject: [PATCH 1/2] ls1028ardb: Enable IIC5_PMUX for GPIO function
+
+Set IIC5_PMUX = 1 to enable GPIO function.
+
+Signed-off-by: Jianchao Wang <jianchao.wang@nxp.com>
+Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
+---
+ ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw | 2 +-
+ ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw   | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw
+index b46ea2e..5466a63 100644
+--- a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw
++++ b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw
+@@ -26,7 +26,7 @@ SYSCLK_FREQ=600
+ IIC2_PMUX=6
+ IIC3_PMUX=2
+ IIC4_PMUX=2
+-IIC5_PMUX=2
++IIC5_PMUX=1
+ IIC6_PMUX=2
+ CLK_OUT_PMUX=2
+ EC1_SAI4_5_PMUX=5
+diff --git a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw
+index 04e2208..1908d8c 100644
+--- a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw
++++ b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw
+@@ -26,7 +26,7 @@ SYSCLK_FREQ=600
+ IIC2_PMUX=6
+ IIC3_PMUX=2
+ IIC4_PMUX=2
+-IIC5_PMUX=2
++IIC5_PMUX=1
+ IIC6_PMUX=3
+ CLK_OUT_PMUX=2
+ EC1_SAI4_5_PMUX=5
+--
+2.17.1
diff --git a/package/freescale-qoriq/fsl-qoriq-rcw/0002-ls1028ardb-Enable-CLK_OUT_PMUX-for-GPIO-function.patch b/package/freescale-qoriq/fsl-qoriq-rcw/0002-ls1028ardb-Enable-CLK_OUT_PMUX-for-GPIO-function.patch
new file mode 100644
index 0000000000..4f00541d69
--- /dev/null
+++ b/package/freescale-qoriq/fsl-qoriq-rcw/0002-ls1028ardb-Enable-CLK_OUT_PMUX-for-GPIO-function.patch
@@ -0,0 +1,40 @@
+From 4a3c9ea5d0c7bf8eec8cb6276d6f4d940f3946db Mon Sep 17 00:00:00 2001
+From: Jerry Huang <jerry.huang@nxp.com>
+Date: Thu, 19 Sep 2019 12:13:48 +0800
+Subject: [PATCH 2/2] ls1028ardb/rcw: Enable CLK_OUT_PMUX for GPIO function
+
+Signed-off-by: Jianchao Wang <jianchao.wang@nxp.com>
+Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
+---
+ ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw | 2 +-
+ ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw   | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw
+index 5466a63..a5ed4d4 100644
+--- a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw
++++ b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.rcw
+@@ -28,7 +28,7 @@ IIC3_PMUX=2
+ IIC4_PMUX=2
+ IIC5_PMUX=1
+ IIC6_PMUX=2
+-CLK_OUT_PMUX=2
++CLK_OUT_PMUX=1
+ EC1_SAI4_5_PMUX=5
+ EC1_SAI3_6_PMUX=5
+ USB3_CLK_FSEL=39
+diff --git a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw
+index 1908d8c..c930b83 100644
+--- a/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw
++++ b/ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.rcw
+@@ -28,7 +28,7 @@ IIC3_PMUX=2
+ IIC4_PMUX=2
+ IIC5_PMUX=1
+ IIC6_PMUX=3
+-CLK_OUT_PMUX=2
++CLK_OUT_PMUX=1
+ EC1_SAI4_5_PMUX=5
+ EC1_SAI3_6_PMUX=5
+ USB3_CLK_FSEL=39
+--
+2.17.1
-- 
2.17.1

  parent reply	other threads:[~2019-11-21 10:23 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-21 10:23 [Buildroot] [PATCH v2 0/9] new board ls1028ardb introduced Changming Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 01/10] package/freescale-qoriq: new package directory Changming Huang
2019-11-25 21:13   ` Thomas Petazzoni
2019-11-26  2:49     ` [Buildroot] [EXT] " Jerry Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 02/10] package/freescale-qoriq/fsl-qoriq-rcw: move rcw into freescale-qoriq and rename it Changming Huang
2019-11-21 10:34   ` Michael Walle
2019-11-21 10:42     ` [Buildroot] [EXT] " Jerry Huang
2019-11-25 21:15   ` [Buildroot] " Thomas Petazzoni
2019-11-26  3:25     ` [Buildroot] [EXT] " Jerry Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 03/10] package/freescale-qoriq/fsl-qoriq-rcw: upgrade the rcw version to LSDK-19.09 Changming Huang
2019-11-25 21:17   ` Thomas Petazzoni
2019-11-26  3:51     ` [Buildroot] [EXT] " Jerry Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 04/10] package/freescale-qoriq/fsl-qoriq-rcw: add target rcw binary support Changming Huang
2019-11-25 21:23   ` Thomas Petazzoni
2019-11-26  4:33     ` [Buildroot] [EXT] " Jerry Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 05/10] boot/arm-trusted-firmware: Add option BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE Changming Huang
2019-11-22  9:11   ` Sergey Matyukevich
2019-11-22  9:24     ` [Buildroot] [EXT] " Jerry Huang
2019-11-25 21:59   ` [Buildroot] " Thomas Petazzoni
2019-11-21 10:23 ` [Buildroot] [PATCH v2 06/10] boot/arm-trusted-firmware: Add RCW support Changming Huang
2019-11-22  9:19   ` Sergey Matyukevich
2019-11-22  9:31     ` [Buildroot] [EXT] " Jerry Huang
2019-11-25 22:09   ` [Buildroot] " Thomas Petazzoni
2019-11-26  7:06     ` [Buildroot] [EXT] " Jerry Huang
2019-11-26  7:34       ` Jerry Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 07/10] package/freescale-qoriq/fsl-qoriq-cadence-dp-fw: new package Changming Huang
2019-11-21 10:42   ` Michael Walle
2019-11-21 11:04     ` [Buildroot] [EXT] " Jerry Huang
2019-11-22 10:41     ` Jerry Huang
2019-11-21 10:51   ` [Buildroot] " Michael Walle
2019-11-21 11:09     ` [Buildroot] [EXT] " Jerry Huang
2019-11-22 10:40     ` Jerry Huang
2019-11-22 11:00       ` Michael Walle
2019-11-25  2:40         ` Jerry Huang
2019-11-22 11:05       ` Thomas Petazzoni
2019-11-25  6:25         ` Jerry Huang
2019-11-25 22:12   ` [Buildroot] " Thomas Petazzoni
2019-11-26  8:09     ` [Buildroot] [EXT] " Jerry Huang
2019-11-26  9:21       ` Michael Walle
2019-11-26 10:13         ` Jerry Huang
2019-11-26  9:29       ` Michael Walle
2019-11-26 10:12         ` Thomas Petazzoni
2019-11-26 10:31           ` Michael Walle
2019-11-26 12:10             ` Jerry Huang
2019-11-21 10:23 ` Changming Huang [this message]
2019-11-25 22:13   ` [Buildroot] [PATCH v2 08/10] package/freescale-qoriq/fsl-qoriq-rcw:Enable IIC5_PMUX and CLK_OUT_PMUX for GPIO Thomas Petazzoni
2019-11-26  8:15     ` [Buildroot] [EXT] " Jerry Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 09/10] board/freescale/common/ls: Add standard post image script for Layerscape processors Changming Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 10/10] configs/freescale_ls1028ardb*: new board Changming Huang
2019-11-25 22:17   ` Thomas Petazzoni
2019-11-26 12:02     ` [Buildroot] [EXT] " Jerry Huang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191121102324.35225-9-jerry.huang@nxp.com \
    --to=jerry.huang@nxp.com \
    --cc=buildroot@busybox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.