From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> To: andrew.murray@arm.com, maz@kernel.org, linux-kernel@vger.kernel.org, Florian Fainelli <f.fainelli@gmail.com>, bcm-kernel-feedback-list@broadcom.com, Eric Anholt <eric@anholt.net>, Stefan Wahren <wahrenst@gmx.net>, Bjorn Helgaas <bhelgaas@google.com> Cc: james.quinlan@broadcom.com, mbrugger@suse.com, phil@raspberrypi.org, jeremy.linton@arm.com, linux-pci@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, Nicolas Saenz Julienne <nsaenzjulienne@suse.de>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org Subject: [PATCH v3 2/7] dt-bindings: PCI: Add bindings for brcmstb's PCIe device Date: Tue, 26 Nov 2019 10:19:40 +0100 [thread overview] Message-ID: <20191126091946.7970-3-nsaenzjulienne@suse.de> (raw) In-Reply-To: <20191126091946.7970-1-nsaenzjulienne@suse.de> From: Jim Quinlan <james.quinlan@broadcom.com> The DT bindings description of the brcmstb PCIe device is described. This node can only be used for now on the Raspberry Pi 4. Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> --- Changes since v2: - Add pci reference schema - Drop all default properties - Assume msi-controller and msi-parent are properly defined - Add num entries on multiple properties - use unevaluatedProperties - Update required properties - Fix license Changes since v1: - Fix commit Subject - Remove linux,pci-domain This was based on Jim's original submission[1], converted to yaml and adapted to the RPi4 case. [1] https://patchwork.kernel.org/patch/10605937/ .../bindings/pci/brcm,stb-pcie.yaml | 97 +++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml new file mode 100644 index 000000000000..77d3e81a437b --- /dev/null +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Brcmstb PCIe Host Controller Device Tree Bindings + +maintainers: + - Nicolas Saenz Julienne <nsaenzjulienne@suse.de> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: brcm,bcm2711-pcie # The Raspberry Pi 4 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + items: + - description: PCIe host controller + - description: builtin MSI controller + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + - const: pcie + - const: msi + + ranges: + maxItems: 1 + + dma-ranges: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: sw_pcie + + msi-controller: + description: Identifies the node as an MSI controller. + + msi-parent: + description: MSI controller the device is capable of using. + + brcm,enable-ssc: + description: Indicates usage of spread-spectrum clocking. + type: boolean + +required: + - reg + - dma-ranges + - "#interrupt-cells" + - interrupts + - interrupt-names + - interrupt-map-mask + - interrupt-map + - msi-controller + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + scb { + #address-cells = <2>; + #size-cells = <1>; + pcie0: pcie@7d500000 { + compatible = "brcm,bcm2711-pcie"; + reg = <0x0 0x7d500000 0x9310>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie", "msi"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + msi-parent = <&pcie0>; + msi-controller; + ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>; + dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>; + brcm,enable-ssc; + }; + }; -- 2.24.0
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> To: andrew.murray@arm.com, maz@kernel.org, linux-kernel@vger.kernel.org, Florian Fainelli <f.fainelli@gmail.com>, bcm-kernel-feedback-list@broadcom.com, Eric Anholt <eric@anholt.net>, Stefan Wahren <wahrenst@gmx.net>, Bjorn Helgaas <bhelgaas@google.com> Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org, mbrugger@suse.com, linux-pci@vger.kernel.org, phil@raspberrypi.org, jeremy.linton@arm.com, Rob Herring <robh+dt@kernel.org>, linux-rpi-kernel@lists.infradead.org, james.quinlan@broadcom.com, Nicolas Saenz Julienne <nsaenzjulienne@suse.de>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 2/7] dt-bindings: PCI: Add bindings for brcmstb's PCIe device Date: Tue, 26 Nov 2019 10:19:40 +0100 [thread overview] Message-ID: <20191126091946.7970-3-nsaenzjulienne@suse.de> (raw) In-Reply-To: <20191126091946.7970-1-nsaenzjulienne@suse.de> From: Jim Quinlan <james.quinlan@broadcom.com> The DT bindings description of the brcmstb PCIe device is described. This node can only be used for now on the Raspberry Pi 4. Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> --- Changes since v2: - Add pci reference schema - Drop all default properties - Assume msi-controller and msi-parent are properly defined - Add num entries on multiple properties - use unevaluatedProperties - Update required properties - Fix license Changes since v1: - Fix commit Subject - Remove linux,pci-domain This was based on Jim's original submission[1], converted to yaml and adapted to the RPi4 case. [1] https://patchwork.kernel.org/patch/10605937/ .../bindings/pci/brcm,stb-pcie.yaml | 97 +++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml new file mode 100644 index 000000000000..77d3e81a437b --- /dev/null +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Brcmstb PCIe Host Controller Device Tree Bindings + +maintainers: + - Nicolas Saenz Julienne <nsaenzjulienne@suse.de> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: brcm,bcm2711-pcie # The Raspberry Pi 4 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + items: + - description: PCIe host controller + - description: builtin MSI controller + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + - const: pcie + - const: msi + + ranges: + maxItems: 1 + + dma-ranges: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: sw_pcie + + msi-controller: + description: Identifies the node as an MSI controller. + + msi-parent: + description: MSI controller the device is capable of using. + + brcm,enable-ssc: + description: Indicates usage of spread-spectrum clocking. + type: boolean + +required: + - reg + - dma-ranges + - "#interrupt-cells" + - interrupts + - interrupt-names + - interrupt-map-mask + - interrupt-map + - msi-controller + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + scb { + #address-cells = <2>; + #size-cells = <1>; + pcie0: pcie@7d500000 { + compatible = "brcm,bcm2711-pcie"; + reg = <0x0 0x7d500000 0x9310>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie", "msi"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + msi-parent = <&pcie0>; + msi-controller; + ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>; + dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>; + brcm,enable-ssc; + }; + }; -- 2.24.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-11-26 9:21 UTC|newest] Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-11-26 9:19 [PATCH v3 0/7] Raspberry Pi 4 PCIe support Nicolas Saenz Julienne 2019-11-26 9:19 ` Nicolas Saenz Julienne 2019-11-26 9:19 ` Nicolas Saenz Julienne 2019-11-26 9:19 ` [PATCH v3 1/7] linux/log2.h: Add roundup/rounddown_pow_two64() family of functions Nicolas Saenz Julienne 2019-11-26 9:19 ` Nicolas Saenz Julienne 2019-11-26 9:19 ` Nicolas Saenz Julienne 2019-11-26 9:19 ` Nicolas Saenz Julienne 2019-11-26 12:51 ` Leon Romanovsky 2019-11-26 12:51 ` Leon Romanovsky 2019-11-26 12:51 ` Leon Romanovsky 2019-11-26 12:51 ` Leon Romanovsky 2019-11-27 18:06 ` Robin Murphy 2019-11-27 18:06 ` Robin Murphy 2019-11-27 18:06 ` Robin Murphy 2019-11-27 18:06 ` Robin Murphy 2019-11-27 18:24 ` Nicolas Saenz Julienne 2019-11-27 18:24 ` Nicolas Saenz Julienne 2019-11-27 18:24 ` Nicolas Saenz Julienne 2019-11-27 18:24 ` Nicolas Saenz Julienne 2019-11-27 19:06 ` Robin Murphy 2019-11-27 19:06 ` Robin Murphy 2019-11-27 19:06 ` Robin Murphy 2019-11-27 19:06 ` Robin Murphy 2019-11-27 19:12 ` Leon Romanovsky 2019-11-27 19:12 ` Leon Romanovsky 2019-11-27 19:12 ` Leon Romanovsky 2019-11-27 19:12 ` Leon Romanovsky 2019-11-27 19:16 ` Nicolas Saenz Julienne 2019-11-27 19:16 ` Nicolas Saenz Julienne 2019-11-27 19:16 ` Nicolas Saenz Julienne 2019-11-27 19:16 ` Nicolas Saenz Julienne 2019-11-27 17:36 ` Nicolas Saenz Julienne 2019-11-27 17:36 ` Nicolas Saenz Julienne 2019-11-27 17:36 ` Nicolas Saenz Julienne 2019-11-26 9:19 ` Nicolas Saenz Julienne [this message] 2019-11-26 9:19 ` [PATCH v3 2/7] dt-bindings: PCI: Add bindings for brcmstb's PCIe device Nicolas Saenz Julienne 2019-12-02 16:39 ` Rob Herring 2019-12-02 16:39 ` Rob Herring 2019-11-26 9:19 ` [PATCH v3 3/7] ARM: dts: bcm2711: Enable PCIe controller Nicolas Saenz Julienne 2019-11-26 9:19 ` Nicolas Saenz Julienne 2019-11-26 9:37 ` Phil Elwell 2019-11-26 9:37 ` Phil Elwell 2019-11-26 9:43 ` Nicolas Saenz Julienne 2019-11-26 9:43 ` Nicolas Saenz Julienne 2019-11-26 9:19 ` [PATCH v3 4/7] PCI: brcmstb: add Broadcom STB PCIe host controller driver Nicolas Saenz Julienne 2019-11-26 9:19 ` Nicolas Saenz Julienne 2019-12-02 15:01 ` Andrew Murray 2019-12-02 15:01 ` Andrew Murray 2019-12-02 15:49 ` Jim Quinlan 2019-12-02 15:49 ` Jim Quinlan 2019-12-03 16:31 ` Jeremy Linton 2019-12-03 16:31 ` Jeremy Linton 2019-12-03 16:48 ` Robin Murphy 2019-12-03 16:48 ` Robin Murphy 2019-12-03 17:23 ` Nicolas Saenz Julienne 2019-12-03 17:23 ` Nicolas Saenz Julienne 2019-11-26 9:19 ` [PATCH v3 5/7] PCI: brcmstb: add MSI capability Nicolas Saenz Julienne 2019-11-26 9:19 ` Nicolas Saenz Julienne 2019-11-29 15:46 ` Andrew Murray 2019-11-29 15:46 ` Andrew Murray 2019-12-02 9:59 ` Nicolas Saenz Julienne 2019-12-02 9:59 ` Nicolas Saenz Julienne 2019-12-02 12:20 ` Andrew Murray 2019-12-02 12:20 ` Andrew Murray 2019-12-02 12:22 ` Nicolas Saenz Julienne 2019-12-02 12:22 ` Nicolas Saenz Julienne 2019-11-26 9:19 ` [PATCH v3 6/7] MAINTAINERS: Add brcmstb PCIe controller Nicolas Saenz Julienne 2019-11-26 9:19 ` [PATCH v3 7/7] arm64: defconfig: Enable Broadcom's STB " Nicolas Saenz Julienne 2019-11-26 9:19 ` Nicolas Saenz Julienne 2019-11-26 21:50 ` [PATCH v3 0/7] Raspberry Pi 4 PCIe support Bjorn Helgaas 2019-11-26 21:50 ` Bjorn Helgaas 2019-11-26 21:50 ` Bjorn Helgaas 2019-11-27 17:28 ` Nicolas Saenz Julienne 2019-11-27 17:28 ` Nicolas Saenz Julienne 2019-11-27 17:28 ` Nicolas Saenz Julienne
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191126091946.7970-3-nsaenzjulienne@suse.de \ --to=nsaenzjulienne@suse.de \ --cc=andrew.murray@arm.com \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=bhelgaas@google.com \ --cc=devicetree@vger.kernel.org \ --cc=eric@anholt.net \ --cc=f.fainelli@gmail.com \ --cc=james.quinlan@broadcom.com \ --cc=jeremy.linton@arm.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pci@vger.kernel.org \ --cc=linux-rpi-kernel@lists.infradead.org \ --cc=mark.rutland@arm.com \ --cc=maz@kernel.org \ --cc=mbrugger@suse.com \ --cc=phil@raspberrypi.org \ --cc=robh+dt@kernel.org \ --cc=wahrenst@gmx.net \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.