From: Andre Przywara <andre.przywara@arm.com> To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org> Cc: Mark Rutland <mark.rutland@arm.com>, Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com, Icenowy Zheng <icenowy@aosc.io> Subject: [PATCH 0/3] ARM: dts: sun8i: R40: DT fixes and updates Date: Thu, 2 Jan 2020 01:26:54 +0000 [thread overview] Message-ID: <20200102012657.9278-1-andre.przywara@arm.com> (raw) Hi, some changes I made to the R40 .dtsi when playing around with a Bananapi M2 Berry board: - The GICC region is wrongly reported as 4K only, preventing KVM from using its VGIC emulation. - The PMU node is missing, similar story as with the other SoCs: this time the SPI numbers are not even mentioned in the manual. - I hooked up a SPI flash to the PortC SPI0 header pins (from which the board can even boot from). So patch 3 adds the SPI nodes and its pinmux setup, in case people need this for their peripherals. Please have a look and apply! Cheers, Andre. Andre Przywara (3): ARM: dts: sun8i: R40: Upgrade GICC reg size to 8K ARM: dts: sun8i: R40: Add PMU node ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxes arch/arm/boot/dts/sun8i-r40.dtsi | 108 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 103 insertions(+), 5 deletions(-) -- 2.14.5
WARNING: multiple messages have this Message-ID (diff)
From: Andre Przywara <andre.przywara@arm.com> To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org> Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com, Rob Herring <robh+dt@kernel.org>, linux-arm-kernel@lists.infradead.org, Icenowy Zheng <icenowy@aosc.io> Subject: [PATCH 0/3] ARM: dts: sun8i: R40: DT fixes and updates Date: Thu, 2 Jan 2020 01:26:54 +0000 [thread overview] Message-ID: <20200102012657.9278-1-andre.przywara@arm.com> (raw) Hi, some changes I made to the R40 .dtsi when playing around with a Bananapi M2 Berry board: - The GICC region is wrongly reported as 4K only, preventing KVM from using its VGIC emulation. - The PMU node is missing, similar story as with the other SoCs: this time the SPI numbers are not even mentioned in the manual. - I hooked up a SPI flash to the PortC SPI0 header pins (from which the board can even boot from). So patch 3 adds the SPI nodes and its pinmux setup, in case people need this for their peripherals. Please have a look and apply! Cheers, Andre. Andre Przywara (3): ARM: dts: sun8i: R40: Upgrade GICC reg size to 8K ARM: dts: sun8i: R40: Add PMU node ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxes arch/arm/boot/dts/sun8i-r40.dtsi | 108 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 103 insertions(+), 5 deletions(-) -- 2.14.5 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-01-02 1:27 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-01-02 1:26 Andre Przywara [this message] 2020-01-02 1:26 ` [PATCH 0/3] ARM: dts: sun8i: R40: DT fixes and updates Andre Przywara 2020-01-02 1:26 ` [PATCH 1/3] ARM: dts: sun8i: R40: Upgrade GICC reg size to 8K Andre Przywara 2020-01-02 1:26 ` Andre Przywara 2020-01-02 9:31 ` Maxime Ripard 2020-01-02 9:31 ` Maxime Ripard 2020-01-02 1:26 ` [PATCH 2/3] ARM: dts: sun8i: R40: Add PMU node Andre Przywara 2020-01-02 1:26 ` Andre Przywara 2020-01-02 9:32 ` Maxime Ripard 2020-01-02 9:32 ` Maxime Ripard 2020-01-02 1:26 ` [PATCH 3/3] ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxes Andre Przywara 2020-01-02 1:26 ` Andre Przywara 2020-01-02 9:57 ` Maxime Ripard 2020-01-02 9:57 ` Maxime Ripard 2020-01-02 10:41 ` Andre Przywara 2020-01-02 10:41 ` Andre Przywara 2020-01-02 10:54 ` Chen-Yu Tsai 2020-01-02 10:54 ` Chen-Yu Tsai 2020-01-04 10:04 ` Maxime Ripard 2020-01-04 10:04 ` Maxime Ripard 2020-01-05 16:40 ` André Przywara 2020-01-05 16:40 ` André Przywara 2020-01-05 18:28 ` Maxime Ripard 2020-01-05 18:28 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200102012657.9278-1-andre.przywara@arm.com \ --to=andre.przywara@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=icenowy@aosc.io \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-sunxi@googlegroups.com \ --cc=mark.rutland@arm.com \ --cc=mripard@kernel.org \ --cc=robh+dt@kernel.org \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.