* [Intel-gfx] [PATCH v5 1/3] drm/dp: DRM DP helper for reading Ignore MSA from DPCD
@ 2020-05-13 5:34 ` Manasi Navare
0 siblings, 0 replies; 16+ messages in thread
From: Manasi Navare @ 2020-05-13 5:34 UTC (permalink / raw)
To: intel-gfx, dri-devel; +Cc: Harry Wentland, Nicholas Kazlauskas
DP sink device sets the Ignore MSA bit in its
DP_DOWNSTREAM_PORT_COUNT register to indicate its ability to
ignore the MSA video timing parameters and its ability to support
seamless video timing change over a range of timing exposed by
DisplayID and EDID.
This is required for the sink to indicate that it is Adaptive sync
capable.
v3:
* Fi the typo in commit message (Manasi)
v2:
* Rename to describe what the function does (Jani Nikula)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
---
include/drm/drm_dp_helper.h | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 6c4b53dcb851..d43b5c9705d4 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -1454,6 +1454,14 @@ drm_dp_alternate_scrambler_reset_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
DP_ALTERNATE_SCRAMBLER_RESET_CAP;
}
+/* Ignore MSA timing for Adaptive Sync support on DP 1.4 */
+static inline bool
+drm_dp_sink_can_do_video_without_timing_msa(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
+{
+ return dpcd[DP_DOWN_STREAM_PORT_COUNT] &
+ DP_MSA_TIMING_PAR_IGNORED;
+}
+
/*
* DisplayPort AUX channel
*/
--
2.19.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v5 2/3] drm/i915/dp: Attach and set drm connector VRR property
2020-05-13 5:34 ` [Intel-gfx] " Manasi Navare
@ 2020-05-13 5:34 ` Manasi Navare
-1 siblings, 0 replies; 16+ messages in thread
From: Manasi Navare @ 2020-05-13 5:34 UTC (permalink / raw)
To: intel-gfx, dri-devel; +Cc: Manasi Navare, Aditya Swarup
From: Aditya Swarup <aditya.swarup@intel.com>
This function sets the VRR property for connector based
on the platform support, EDID monitor range and DP sink
DPCD capability of outputing video without msa
timing information.
v5:
* Fix the vrr prop not being set in kernel (Manasi)
* Unset the prop on connector disconnect (Manasi)
v4:
* Rebase (Mansi)
v3:
* intel_dp_is_vrr_capable can be used for debugfs, make it
non static (Manasi)
v2:
* Just set this in intel_dp_get_modes instead of new hook (Jani)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
drivers/gpu/drm/i915/display/intel_dp.c | 27 +++++++++++++++++++++++++
drivers/gpu/drm/i915/display/intel_dp.h | 2 ++
2 files changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 67723dede1d1..8957a9f50f0e 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -6153,6 +6153,9 @@ intel_dp_detect(struct drm_connector *connector,
if (status == connector_status_disconnected) {
memset(&intel_dp->compliance, 0, sizeof(intel_dp->compliance));
memset(intel_dp->dsc_dpcd, 0, sizeof(intel_dp->dsc_dpcd));
+ /*Reset the immutable VRR Capable property */
+ drm_connector_set_vrr_capable_property(connector,
+ false);
if (intel_dp->is_mst) {
drm_dbg_kms(&dev_priv->drm,
@@ -6260,6 +6263,23 @@ intel_dp_force(struct drm_connector *connector)
intel_display_power_put(dev_priv, aux_domain, wakeref);
}
+bool intel_dp_is_vrr_capable(struct drm_connector *connector)
+{
+ struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector));
+ const struct drm_display_info *info = &connector->display_info;
+ struct drm_i915_private *dev_priv = to_i915(connector->dev);
+
+ /*
+ * DP Sink is capable of Variable refresh video timings if
+ * Ignore MSA bit is set in DPCD.
+ * EDID monitor range also should be atleast 10 for reasonable
+ * Adaptive sync/ VRR end user experience.
+ */
+ return INTEL_GEN(dev_priv) >= 12 &&
+ drm_dp_sink_can_do_video_without_timing_msa(intel_dp->dpcd) &&
+ info->monitor_range.max_vfreq - info->monitor_range.min_vfreq > 10;
+}
+
static int intel_dp_get_modes(struct drm_connector *connector)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
@@ -6268,6 +6288,10 @@ static int intel_dp_get_modes(struct drm_connector *connector)
edid = intel_connector->detect_edid;
if (edid) {
int ret = intel_connector_update_modes(connector, edid);
+
+ if (intel_dp_is_vrr_capable(connector))
+ drm_connector_set_vrr_capable_property(connector,
+ true);
if (ret)
return ret;
}
@@ -7354,6 +7378,9 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connect
connector->state->scaling_mode = DRM_MODE_SCALE_ASPECT;
}
+
+ if (INTEL_GEN(dev_priv) >= 12)
+ drm_connector_attach_vrr_capable_property(connector);
}
static void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
index 6659ce15a693..aa7c1f530d5e 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.h
+++ b/drivers/gpu/drm/i915/display/intel_dp.h
@@ -14,6 +14,7 @@ enum pipe;
enum port;
struct drm_connector_state;
struct drm_encoder;
+struct drm_connector;
struct drm_i915_private;
struct drm_modeset_acquire_ctx;
struct intel_connector;
@@ -119,6 +120,7 @@ void intel_dp_set_infoframes(struct intel_encoder *encoder, bool enable,
const struct drm_connector_state *conn_state);
bool intel_digital_port_connected(struct intel_encoder *encoder);
void intel_dp_process_phy_request(struct intel_dp *intel_dp);
+bool intel_dp_is_vrr_capable(struct drm_connector *connector);
static inline unsigned int intel_dp_unused_lane_mask(int lane_count)
{
--
2.19.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [Intel-gfx] [PATCH v5 2/3] drm/i915/dp: Attach and set drm connector VRR property
@ 2020-05-13 5:34 ` Manasi Navare
0 siblings, 0 replies; 16+ messages in thread
From: Manasi Navare @ 2020-05-13 5:34 UTC (permalink / raw)
To: intel-gfx, dri-devel
From: Aditya Swarup <aditya.swarup@intel.com>
This function sets the VRR property for connector based
on the platform support, EDID monitor range and DP sink
DPCD capability of outputing video without msa
timing information.
v5:
* Fix the vrr prop not being set in kernel (Manasi)
* Unset the prop on connector disconnect (Manasi)
v4:
* Rebase (Mansi)
v3:
* intel_dp_is_vrr_capable can be used for debugfs, make it
non static (Manasi)
v2:
* Just set this in intel_dp_get_modes instead of new hook (Jani)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
drivers/gpu/drm/i915/display/intel_dp.c | 27 +++++++++++++++++++++++++
drivers/gpu/drm/i915/display/intel_dp.h | 2 ++
2 files changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 67723dede1d1..8957a9f50f0e 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -6153,6 +6153,9 @@ intel_dp_detect(struct drm_connector *connector,
if (status == connector_status_disconnected) {
memset(&intel_dp->compliance, 0, sizeof(intel_dp->compliance));
memset(intel_dp->dsc_dpcd, 0, sizeof(intel_dp->dsc_dpcd));
+ /*Reset the immutable VRR Capable property */
+ drm_connector_set_vrr_capable_property(connector,
+ false);
if (intel_dp->is_mst) {
drm_dbg_kms(&dev_priv->drm,
@@ -6260,6 +6263,23 @@ intel_dp_force(struct drm_connector *connector)
intel_display_power_put(dev_priv, aux_domain, wakeref);
}
+bool intel_dp_is_vrr_capable(struct drm_connector *connector)
+{
+ struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector));
+ const struct drm_display_info *info = &connector->display_info;
+ struct drm_i915_private *dev_priv = to_i915(connector->dev);
+
+ /*
+ * DP Sink is capable of Variable refresh video timings if
+ * Ignore MSA bit is set in DPCD.
+ * EDID monitor range also should be atleast 10 for reasonable
+ * Adaptive sync/ VRR end user experience.
+ */
+ return INTEL_GEN(dev_priv) >= 12 &&
+ drm_dp_sink_can_do_video_without_timing_msa(intel_dp->dpcd) &&
+ info->monitor_range.max_vfreq - info->monitor_range.min_vfreq > 10;
+}
+
static int intel_dp_get_modes(struct drm_connector *connector)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
@@ -6268,6 +6288,10 @@ static int intel_dp_get_modes(struct drm_connector *connector)
edid = intel_connector->detect_edid;
if (edid) {
int ret = intel_connector_update_modes(connector, edid);
+
+ if (intel_dp_is_vrr_capable(connector))
+ drm_connector_set_vrr_capable_property(connector,
+ true);
if (ret)
return ret;
}
@@ -7354,6 +7378,9 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connect
connector->state->scaling_mode = DRM_MODE_SCALE_ASPECT;
}
+
+ if (INTEL_GEN(dev_priv) >= 12)
+ drm_connector_attach_vrr_capable_property(connector);
}
static void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
index 6659ce15a693..aa7c1f530d5e 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.h
+++ b/drivers/gpu/drm/i915/display/intel_dp.h
@@ -14,6 +14,7 @@ enum pipe;
enum port;
struct drm_connector_state;
struct drm_encoder;
+struct drm_connector;
struct drm_i915_private;
struct drm_modeset_acquire_ctx;
struct intel_connector;
@@ -119,6 +120,7 @@ void intel_dp_set_infoframes(struct intel_encoder *encoder, bool enable,
const struct drm_connector_state *conn_state);
bool intel_digital_port_connected(struct intel_encoder *encoder);
void intel_dp_process_phy_request(struct intel_dp *intel_dp);
+bool intel_dp_is_vrr_capable(struct drm_connector *connector);
static inline unsigned int intel_dp_unused_lane_mask(int lane_count)
{
--
2.19.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v5 3/3] drm/i915/dp: Expose connector VRR info via debugfs
2020-05-13 5:34 ` [Intel-gfx] " Manasi Navare
@ 2020-05-13 5:34 ` Manasi Navare
-1 siblings, 0 replies; 16+ messages in thread
From: Manasi Navare @ 2020-05-13 5:34 UTC (permalink / raw)
To: intel-gfx, dri-devel; +Cc: Manasi Navare, Bhanuprakash Modem
From: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
[Why]
It's useful to know the min and max vrr range for IGT testing.
[How]
Expose the min and max vfreq for the connector via a debugfs file
on the connector, "i915_vrr_info".
Example usage: cat /sys/kernel/debug/dri/0/DP-1/i915_vrr_info
v5:
* Rename to vrr_range to match AMD debugfs
v4:
* Rebase
v3:
* Remove the unnecessary debug print (Manasi)
v2:
* Fix the typo in max_vfreq (Manasi)
* Change the name of node to i915_vrr_info so we can add
other vrr info for more debug info (Manasi)
* Change the VRR capable to display Yes or No (Manasi)
* Fix indentation checkpatch errors (Manasi)
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Manasi Navare <manasi.d.navare@intel.com>
---
.../drm/i915/display/intel_display_debugfs.c | 22 ++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
index 70525623bcdf..a0d680c13e0d 100644
--- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
+++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
@@ -2185,6 +2185,21 @@ static const struct file_operations i915_dsc_fec_support_fops = {
.write = i915_dsc_fec_support_write
};
+static int vrr_range_show(struct seq_file *m, void *data)
+{
+ struct drm_connector *connector = m->private;
+
+ if (connector->status != connector_status_connected)
+ return -ENODEV;
+
+ seq_printf(m, "Vrr_capable: %s\n", yesno(intel_dp_is_vrr_capable(connector)));
+ seq_printf(m, "Min: %u\n", (u8)connector->display_info.monitor_range.min_vfreq);
+ seq_printf(m, "Max: %u\n", (u8)connector->display_info.monitor_range.max_vfreq);
+
+ return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(vrr_range);
+
/**
* intel_connector_debugfs_add - add i915 specific connector debugfs files
* @connector: pointer to a registered drm_connector
@@ -2219,10 +2234,15 @@ int intel_connector_debugfs_add(struct drm_connector *connector)
if (INTEL_GEN(dev_priv) >= 10 &&
(connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
- connector->connector_type == DRM_MODE_CONNECTOR_eDP))
+ connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
debugfs_create_file("i915_dsc_fec_support", S_IRUGO, root,
connector, &i915_dsc_fec_support_fops);
+ if (INTEL_GEN(dev_priv) >= 12)
+ debugfs_create_file("vrr_range", S_IRUGO,
+ root, connector, &vrr_range_fops);
+ }
+
/* Legacy panels doesn't lpsp on any platform */
if ((INTEL_GEN(dev_priv) >= 9 || IS_HASWELL(dev_priv) ||
IS_BROADWELL(dev_priv)) &&
--
2.19.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [Intel-gfx] [PATCH v5 3/3] drm/i915/dp: Expose connector VRR info via debugfs
@ 2020-05-13 5:34 ` Manasi Navare
0 siblings, 0 replies; 16+ messages in thread
From: Manasi Navare @ 2020-05-13 5:34 UTC (permalink / raw)
To: intel-gfx, dri-devel; +Cc: Bhanuprakash Modem
From: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
[Why]
It's useful to know the min and max vrr range for IGT testing.
[How]
Expose the min and max vfreq for the connector via a debugfs file
on the connector, "i915_vrr_info".
Example usage: cat /sys/kernel/debug/dri/0/DP-1/i915_vrr_info
v5:
* Rename to vrr_range to match AMD debugfs
v4:
* Rebase
v3:
* Remove the unnecessary debug print (Manasi)
v2:
* Fix the typo in max_vfreq (Manasi)
* Change the name of node to i915_vrr_info so we can add
other vrr info for more debug info (Manasi)
* Change the VRR capable to display Yes or No (Manasi)
* Fix indentation checkpatch errors (Manasi)
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Manasi Navare <manasi.d.navare@intel.com>
---
.../drm/i915/display/intel_display_debugfs.c | 22 ++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
index 70525623bcdf..a0d680c13e0d 100644
--- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
+++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
@@ -2185,6 +2185,21 @@ static const struct file_operations i915_dsc_fec_support_fops = {
.write = i915_dsc_fec_support_write
};
+static int vrr_range_show(struct seq_file *m, void *data)
+{
+ struct drm_connector *connector = m->private;
+
+ if (connector->status != connector_status_connected)
+ return -ENODEV;
+
+ seq_printf(m, "Vrr_capable: %s\n", yesno(intel_dp_is_vrr_capable(connector)));
+ seq_printf(m, "Min: %u\n", (u8)connector->display_info.monitor_range.min_vfreq);
+ seq_printf(m, "Max: %u\n", (u8)connector->display_info.monitor_range.max_vfreq);
+
+ return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(vrr_range);
+
/**
* intel_connector_debugfs_add - add i915 specific connector debugfs files
* @connector: pointer to a registered drm_connector
@@ -2219,10 +2234,15 @@ int intel_connector_debugfs_add(struct drm_connector *connector)
if (INTEL_GEN(dev_priv) >= 10 &&
(connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
- connector->connector_type == DRM_MODE_CONNECTOR_eDP))
+ connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
debugfs_create_file("i915_dsc_fec_support", S_IRUGO, root,
connector, &i915_dsc_fec_support_fops);
+ if (INTEL_GEN(dev_priv) >= 12)
+ debugfs_create_file("vrr_range", S_IRUGO,
+ root, connector, &vrr_range_fops);
+ }
+
/* Legacy panels doesn't lpsp on any platform */
if ((INTEL_GEN(dev_priv) >= 9 || IS_HASWELL(dev_priv) ||
IS_BROADWELL(dev_priv)) &&
--
2.19.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 16+ messages in thread
* RE: [PATCH v5 3/3] drm/i915/dp: Expose connector VRR info via debugfs
2020-05-13 5:34 ` [Intel-gfx] " Manasi Navare
@ 2020-05-13 11:08 ` Modem, Bhanuprakash
-1 siblings, 0 replies; 16+ messages in thread
From: Modem, Bhanuprakash @ 2020-05-13 11:08 UTC (permalink / raw)
To: Navare, Manasi D, intel-gfx, dri-devel
-----Original Message-----
From: Navare, Manasi D <manasi.d.navare@intel.com>
Sent: Wednesday, May 13, 2020 11:05 AM
To: intel-gfx@lists.freedesktop.org; dri-devel@lists.freedesktop.org
Cc: Modem, Bhanuprakash <bhanuprakash.modem@intel.com>; Navare, Manasi D <manasi.d.navare@intel.com>; Jani Nikula <jani.nikula@linux.intel.com>; Ville Syrjälä <ville.syrjala@linux.intel.com>
Subject: [PATCH v5 3/3] drm/i915/dp: Expose connector VRR info via debugfs
From: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
[Why]
It's useful to know the min and max vrr range for IGT testing.
[How]
Expose the min and max vfreq for the connector via a debugfs file on the connector, "i915_vrr_info".
Example usage: cat /sys/kernel/debug/dri/0/DP-1/i915_vrr_info
[Bhanu]: Can you please fix the commit message? 's/i915_vrr_info/vrr_range/'
v5:
* Rename to vrr_range to match AMD debugfs
v4:
* Rebase
v3:
* Remove the unnecessary debug print (Manasi)
v2:
* Fix the typo in max_vfreq (Manasi)
* Change the name of node to i915_vrr_info so we can add other vrr info for more debug info (Manasi)
* Change the VRR capable to display Yes or No (Manasi)
* Fix indentation checkpatch errors (Manasi)
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Manasi Navare <manasi.d.navare@intel.com>
---
.../drm/i915/display/intel_display_debugfs.c | 22 ++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
index 70525623bcdf..a0d680c13e0d 100644
--- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
+++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
@@ -2185,6 +2185,21 @@ static const struct file_operations i915_dsc_fec_support_fops = {
.write = i915_dsc_fec_support_write
};
+static int vrr_range_show(struct seq_file *m, void *data) {
+ struct drm_connector *connector = m->private;
+
+ if (connector->status != connector_status_connected)
+ return -ENODEV;
+
+ seq_printf(m, "Vrr_capable: %s\n", yesno(intel_dp_is_vrr_capable(connector)));
[Bhanu]: As we can read "vrr_capable" property from DRM_IOCTL_MODE_OBJ_GETPROPERTIES ioctl, I think we don't need to expose "vrr_capable" through debugfs.
+ seq_printf(m, "Min: %u\n", (u8)connector->display_info.monitor_range.min_vfreq);
+ seq_printf(m, "Max: %u\n",
+(u8)connector->display_info.monitor_range.max_vfreq);
+
+ return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(vrr_range);
+
/**
* intel_connector_debugfs_add - add i915 specific connector debugfs files
* @connector: pointer to a registered drm_connector @@ -2219,10 +2234,15 @@ int intel_connector_debugfs_add(struct drm_connector *connector)
if (INTEL_GEN(dev_priv) >= 10 &&
(connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
- connector->connector_type == DRM_MODE_CONNECTOR_eDP))
+ connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
debugfs_create_file("i915_dsc_fec_support", S_IRUGO, root,
connector, &i915_dsc_fec_support_fops);
+ if (INTEL_GEN(dev_priv) >= 12)
+ debugfs_create_file("vrr_range", S_IRUGO,
+ root, connector, &vrr_range_fops);
+ }
+
/* Legacy panels doesn't lpsp on any platform */
if ((INTEL_GEN(dev_priv) >= 9 || IS_HASWELL(dev_priv) ||
IS_BROADWELL(dev_priv)) &&
--
2.19.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [Intel-gfx] [PATCH v5 3/3] drm/i915/dp: Expose connector VRR info via debugfs
@ 2020-05-13 11:08 ` Modem, Bhanuprakash
0 siblings, 0 replies; 16+ messages in thread
From: Modem, Bhanuprakash @ 2020-05-13 11:08 UTC (permalink / raw)
To: Navare, Manasi D, intel-gfx, dri-devel
-----Original Message-----
From: Navare, Manasi D <manasi.d.navare@intel.com>
Sent: Wednesday, May 13, 2020 11:05 AM
To: intel-gfx@lists.freedesktop.org; dri-devel@lists.freedesktop.org
Cc: Modem, Bhanuprakash <bhanuprakash.modem@intel.com>; Navare, Manasi D <manasi.d.navare@intel.com>; Jani Nikula <jani.nikula@linux.intel.com>; Ville Syrjälä <ville.syrjala@linux.intel.com>
Subject: [PATCH v5 3/3] drm/i915/dp: Expose connector VRR info via debugfs
From: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
[Why]
It's useful to know the min and max vrr range for IGT testing.
[How]
Expose the min and max vfreq for the connector via a debugfs file on the connector, "i915_vrr_info".
Example usage: cat /sys/kernel/debug/dri/0/DP-1/i915_vrr_info
[Bhanu]: Can you please fix the commit message? 's/i915_vrr_info/vrr_range/'
v5:
* Rename to vrr_range to match AMD debugfs
v4:
* Rebase
v3:
* Remove the unnecessary debug print (Manasi)
v2:
* Fix the typo in max_vfreq (Manasi)
* Change the name of node to i915_vrr_info so we can add other vrr info for more debug info (Manasi)
* Change the VRR capable to display Yes or No (Manasi)
* Fix indentation checkpatch errors (Manasi)
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Manasi Navare <manasi.d.navare@intel.com>
---
.../drm/i915/display/intel_display_debugfs.c | 22 ++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
index 70525623bcdf..a0d680c13e0d 100644
--- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
+++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
@@ -2185,6 +2185,21 @@ static const struct file_operations i915_dsc_fec_support_fops = {
.write = i915_dsc_fec_support_write
};
+static int vrr_range_show(struct seq_file *m, void *data) {
+ struct drm_connector *connector = m->private;
+
+ if (connector->status != connector_status_connected)
+ return -ENODEV;
+
+ seq_printf(m, "Vrr_capable: %s\n", yesno(intel_dp_is_vrr_capable(connector)));
[Bhanu]: As we can read "vrr_capable" property from DRM_IOCTL_MODE_OBJ_GETPROPERTIES ioctl, I think we don't need to expose "vrr_capable" through debugfs.
+ seq_printf(m, "Min: %u\n", (u8)connector->display_info.monitor_range.min_vfreq);
+ seq_printf(m, "Max: %u\n",
+(u8)connector->display_info.monitor_range.max_vfreq);
+
+ return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(vrr_range);
+
/**
* intel_connector_debugfs_add - add i915 specific connector debugfs files
* @connector: pointer to a registered drm_connector @@ -2219,10 +2234,15 @@ int intel_connector_debugfs_add(struct drm_connector *connector)
if (INTEL_GEN(dev_priv) >= 10 &&
(connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
- connector->connector_type == DRM_MODE_CONNECTOR_eDP))
+ connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
debugfs_create_file("i915_dsc_fec_support", S_IRUGO, root,
connector, &i915_dsc_fec_support_fops);
+ if (INTEL_GEN(dev_priv) >= 12)
+ debugfs_create_file("vrr_range", S_IRUGO,
+ root, connector, &vrr_range_fops);
+ }
+
/* Legacy panels doesn't lpsp on any platform */
if ((INTEL_GEN(dev_priv) >= 9 || IS_HASWELL(dev_priv) ||
IS_BROADWELL(dev_priv)) &&
--
2.19.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH v5 3/3] drm/i915/dp: Expose connector VRR info via debugfs
2020-05-13 11:08 ` [Intel-gfx] " Modem, Bhanuprakash
@ 2020-05-13 18:21 ` Manasi Navare
-1 siblings, 0 replies; 16+ messages in thread
From: Manasi Navare @ 2020-05-13 18:21 UTC (permalink / raw)
To: Modem, Bhanuprakash; +Cc: intel-gfx, dri-devel
On Wed, May 13, 2020 at 04:08:38AM -0700, Modem, Bhanuprakash wrote:
> -----Original Message-----
> From: Navare, Manasi D <manasi.d.navare@intel.com>
> Sent: Wednesday, May 13, 2020 11:05 AM
> To: intel-gfx@lists.freedesktop.org; dri-devel@lists.freedesktop.org
> Cc: Modem, Bhanuprakash <bhanuprakash.modem@intel.com>; Navare, Manasi D <manasi.d.navare@intel.com>; Jani Nikula <jani.nikula@linux.intel.com>; Ville Syrjälä <ville.syrjala@linux.intel.com>
> Subject: [PATCH v5 3/3] drm/i915/dp: Expose connector VRR info via debugfs
>
> From: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
>
> [Why]
> It's useful to know the min and max vrr range for IGT testing.
>
> [How]
> Expose the min and max vfreq for the connector via a debugfs file on the connector, "i915_vrr_info".
>
> Example usage: cat /sys/kernel/debug/dri/0/DP-1/i915_vrr_info
>
> [Bhanu]: Can you please fix the commit message? 's/i915_vrr_info/vrr_range/'
>
> v5:
> * Rename to vrr_range to match AMD debugfs
> v4:
> * Rebase
> v3:
> * Remove the unnecessary debug print (Manasi)
> v2:
> * Fix the typo in max_vfreq (Manasi)
> * Change the name of node to i915_vrr_info so we can add other vrr info for more debug info (Manasi)
> * Change the VRR capable to display Yes or No (Manasi)
> * Fix indentation checkpatch errors (Manasi)
>
> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Tested-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
> .../drm/i915/display/intel_display_debugfs.c | 22 ++++++++++++++++++-
> 1 file changed, 21 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> index 70525623bcdf..a0d680c13e0d 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> +++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> @@ -2185,6 +2185,21 @@ static const struct file_operations i915_dsc_fec_support_fops = {
> .write = i915_dsc_fec_support_write
> };
>
> +static int vrr_range_show(struct seq_file *m, void *data) {
> +struct drm_connector *connector = m->private;
> +
> +if (connector->status != connector_status_connected)
> +return -ENODEV;
> +
> +seq_printf(m, "Vrr_capable: %s\n", yesno(intel_dp_is_vrr_capable(connector)));
> [Bhanu]: As we can read "vrr_capable" property from DRM_IOCTL_MODE_OBJ_GETPROPERTIES ioctl, I think we don't need to expose "vrr_capable" through debugfs.
Yes we can get it with the Get prop IOCTL, but having it in debugfs will still be a good debug info without
needing to call the ioctl
Manasi
> +seq_printf(m, "Min: %u\n", (u8)connector->display_info.monitor_range.min_vfreq);
> +seq_printf(m, "Max: %u\n",
> +(u8)connector->display_info.monitor_range.max_vfreq);
> +
> +return 0;
> +}
> +DEFINE_SHOW_ATTRIBUTE(vrr_range);
> +
> /**
> * intel_connector_debugfs_add - add i915 specific connector debugfs files
> * @connector: pointer to a registered drm_connector @@ -2219,10 +2234,15 @@ int intel_connector_debugfs_add(struct drm_connector *connector)
>
> if (INTEL_GEN(dev_priv) >= 10 &&
> (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
> - connector->connector_type == DRM_MODE_CONNECTOR_eDP))
> + connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
> debugfs_create_file("i915_dsc_fec_support", S_IRUGO, root,
> connector, &i915_dsc_fec_support_fops);
>
> +if (INTEL_GEN(dev_priv) >= 12)
> +debugfs_create_file("vrr_range", S_IRUGO,
> + root, connector, &vrr_range_fops);
> +}
> +
> /* Legacy panels doesn't lpsp on any platform */
> if ((INTEL_GEN(dev_priv) >= 9 || IS_HASWELL(dev_priv) ||
> IS_BROADWELL(dev_priv)) &&
> --
> 2.19.1
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Intel-gfx] [PATCH v5 3/3] drm/i915/dp: Expose connector VRR info via debugfs
@ 2020-05-13 18:21 ` Manasi Navare
0 siblings, 0 replies; 16+ messages in thread
From: Manasi Navare @ 2020-05-13 18:21 UTC (permalink / raw)
To: Modem, Bhanuprakash; +Cc: intel-gfx, dri-devel
On Wed, May 13, 2020 at 04:08:38AM -0700, Modem, Bhanuprakash wrote:
> -----Original Message-----
> From: Navare, Manasi D <manasi.d.navare@intel.com>
> Sent: Wednesday, May 13, 2020 11:05 AM
> To: intel-gfx@lists.freedesktop.org; dri-devel@lists.freedesktop.org
> Cc: Modem, Bhanuprakash <bhanuprakash.modem@intel.com>; Navare, Manasi D <manasi.d.navare@intel.com>; Jani Nikula <jani.nikula@linux.intel.com>; Ville Syrjälä <ville.syrjala@linux.intel.com>
> Subject: [PATCH v5 3/3] drm/i915/dp: Expose connector VRR info via debugfs
>
> From: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
>
> [Why]
> It's useful to know the min and max vrr range for IGT testing.
>
> [How]
> Expose the min and max vfreq for the connector via a debugfs file on the connector, "i915_vrr_info".
>
> Example usage: cat /sys/kernel/debug/dri/0/DP-1/i915_vrr_info
>
> [Bhanu]: Can you please fix the commit message? 's/i915_vrr_info/vrr_range/'
>
> v5:
> * Rename to vrr_range to match AMD debugfs
> v4:
> * Rebase
> v3:
> * Remove the unnecessary debug print (Manasi)
> v2:
> * Fix the typo in max_vfreq (Manasi)
> * Change the name of node to i915_vrr_info so we can add other vrr info for more debug info (Manasi)
> * Change the VRR capable to display Yes or No (Manasi)
> * Fix indentation checkpatch errors (Manasi)
>
> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Tested-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
> .../drm/i915/display/intel_display_debugfs.c | 22 ++++++++++++++++++-
> 1 file changed, 21 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> index 70525623bcdf..a0d680c13e0d 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> +++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> @@ -2185,6 +2185,21 @@ static const struct file_operations i915_dsc_fec_support_fops = {
> .write = i915_dsc_fec_support_write
> };
>
> +static int vrr_range_show(struct seq_file *m, void *data) {
> +struct drm_connector *connector = m->private;
> +
> +if (connector->status != connector_status_connected)
> +return -ENODEV;
> +
> +seq_printf(m, "Vrr_capable: %s\n", yesno(intel_dp_is_vrr_capable(connector)));
> [Bhanu]: As we can read "vrr_capable" property from DRM_IOCTL_MODE_OBJ_GETPROPERTIES ioctl, I think we don't need to expose "vrr_capable" through debugfs.
Yes we can get it with the Get prop IOCTL, but having it in debugfs will still be a good debug info without
needing to call the ioctl
Manasi
> +seq_printf(m, "Min: %u\n", (u8)connector->display_info.monitor_range.min_vfreq);
> +seq_printf(m, "Max: %u\n",
> +(u8)connector->display_info.monitor_range.max_vfreq);
> +
> +return 0;
> +}
> +DEFINE_SHOW_ATTRIBUTE(vrr_range);
> +
> /**
> * intel_connector_debugfs_add - add i915 specific connector debugfs files
> * @connector: pointer to a registered drm_connector @@ -2219,10 +2234,15 @@ int intel_connector_debugfs_add(struct drm_connector *connector)
>
> if (INTEL_GEN(dev_priv) >= 10 &&
> (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
> - connector->connector_type == DRM_MODE_CONNECTOR_eDP))
> + connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
> debugfs_create_file("i915_dsc_fec_support", S_IRUGO, root,
> connector, &i915_dsc_fec_support_fops);
>
> +if (INTEL_GEN(dev_priv) >= 12)
> +debugfs_create_file("vrr_range", S_IRUGO,
> + root, connector, &vrr_range_fops);
> +}
> +
> /* Legacy panels doesn't lpsp on any platform */
> if ((INTEL_GEN(dev_priv) >= 9 || IS_HASWELL(dev_priv) ||
> IS_BROADWELL(dev_priv)) &&
> --
> 2.19.1
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 16+ messages in thread
* RE: [PATCH v5 3/3] drm/i915/dp: Expose connector VRR info via debugfs
2020-05-13 5:34 ` [Intel-gfx] " Manasi Navare
@ 2020-05-14 3:42 ` Modem, Bhanuprakash
-1 siblings, 0 replies; 16+ messages in thread
From: Modem, Bhanuprakash @ 2020-05-14 3:42 UTC (permalink / raw)
To: Navare, Manasi D, intel-gfx, dri-devel
[Why]
It's useful to know the min and max vrr range for IGT testing.
[How]
Expose the min and max vfreq for the connector via a debugfs file on the connector, "vrr_range".
Example usage: cat /sys/kernel/debug/dri/0/DP-1/vrr_range
v5:
* Rename to vrr_range to match AMD debugfs
v4:
* Rebase
v3:
* Remove the unnecessary debug print (Manasi)
v2:
* Fix the typo in max_vfreq (Manasi)
* Change the name of node to i915_vrr_info so we can add other vrr info for more debug info (Manasi)
* Change the VRR capable to display Yes or No (Manasi)
* Fix indentation checkpatch errors (Manasi)
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Manasi Navare <manasi.d.navare@intel.com>
---
.../drm/i915/display/intel_display_debugfs.c | 22 ++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
index 70525623bcdf..a0d680c13e0d 100644
--- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
+++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
@@ -2185,6 +2185,21 @@ static const struct file_operations i915_dsc_fec_support_fops = {
.write = i915_dsc_fec_support_write
};
+static int vrr_range_show(struct seq_file *m, void *data) {
+ struct drm_connector *connector = m->private;
+
+ if (connector->status != connector_status_connected)
+ return -ENODEV;
+
+ seq_printf(m, "Vrr_capable: %s\n", yesno(intel_dp_is_vrr_capable(connector)));
+ seq_printf(m, "Min: %u\n", (u8)connector->display_info.monitor_range.min_vfreq);
+ seq_printf(m, "Max: %u\n",
+(u8)connector->display_info.monitor_range.max_vfreq);
+
+ return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(vrr_range);
+
/**
* intel_connector_debugfs_add - add i915 specific connector debugfs files
* @connector: pointer to a registered drm_connector @@ -2219,10 +2234,15 @@ int intel_connector_debugfs_add(struct drm_connector *connector)
if (INTEL_GEN(dev_priv) >= 10 &&
(connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
- connector->connector_type == DRM_MODE_CONNECTOR_eDP))
+ connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
debugfs_create_file("i915_dsc_fec_support", S_IRUGO, root,
connector, &i915_dsc_fec_support_fops);
+ if (INTEL_GEN(dev_priv) >= 12)
+ debugfs_create_file("vrr_range", S_IRUGO,
+ root, connector, &vrr_range_fops);
+ }
+
/* Legacy panels doesn't lpsp on any platform */
if ((INTEL_GEN(dev_priv) >= 9 || IS_HASWELL(dev_priv) ||
IS_BROADWELL(dev_priv)) &&
--
2.19.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [Intel-gfx] [PATCH v5 3/3] drm/i915/dp: Expose connector VRR info via debugfs
@ 2020-05-14 3:42 ` Modem, Bhanuprakash
0 siblings, 0 replies; 16+ messages in thread
From: Modem, Bhanuprakash @ 2020-05-14 3:42 UTC (permalink / raw)
To: Navare, Manasi D, intel-gfx, dri-devel
[Why]
It's useful to know the min and max vrr range for IGT testing.
[How]
Expose the min and max vfreq for the connector via a debugfs file on the connector, "vrr_range".
Example usage: cat /sys/kernel/debug/dri/0/DP-1/vrr_range
v5:
* Rename to vrr_range to match AMD debugfs
v4:
* Rebase
v3:
* Remove the unnecessary debug print (Manasi)
v2:
* Fix the typo in max_vfreq (Manasi)
* Change the name of node to i915_vrr_info so we can add other vrr info for more debug info (Manasi)
* Change the VRR capable to display Yes or No (Manasi)
* Fix indentation checkpatch errors (Manasi)
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Manasi Navare <manasi.d.navare@intel.com>
---
.../drm/i915/display/intel_display_debugfs.c | 22 ++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
index 70525623bcdf..a0d680c13e0d 100644
--- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
+++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
@@ -2185,6 +2185,21 @@ static const struct file_operations i915_dsc_fec_support_fops = {
.write = i915_dsc_fec_support_write
};
+static int vrr_range_show(struct seq_file *m, void *data) {
+ struct drm_connector *connector = m->private;
+
+ if (connector->status != connector_status_connected)
+ return -ENODEV;
+
+ seq_printf(m, "Vrr_capable: %s\n", yesno(intel_dp_is_vrr_capable(connector)));
+ seq_printf(m, "Min: %u\n", (u8)connector->display_info.monitor_range.min_vfreq);
+ seq_printf(m, "Max: %u\n",
+(u8)connector->display_info.monitor_range.max_vfreq);
+
+ return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(vrr_range);
+
/**
* intel_connector_debugfs_add - add i915 specific connector debugfs files
* @connector: pointer to a registered drm_connector @@ -2219,10 +2234,15 @@ int intel_connector_debugfs_add(struct drm_connector *connector)
if (INTEL_GEN(dev_priv) >= 10 &&
(connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
- connector->connector_type == DRM_MODE_CONNECTOR_eDP))
+ connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
debugfs_create_file("i915_dsc_fec_support", S_IRUGO, root,
connector, &i915_dsc_fec_support_fops);
+ if (INTEL_GEN(dev_priv) >= 12)
+ debugfs_create_file("vrr_range", S_IRUGO,
+ root, connector, &vrr_range_fops);
+ }
+
/* Legacy panels doesn't lpsp on any platform */
if ((INTEL_GEN(dev_priv) >= 9 || IS_HASWELL(dev_priv) ||
IS_BROADWELL(dev_priv)) &&
--
2.19.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [v5,1/3] drm/dp: DRM DP helper for reading Ignore MSA from DPCD
2020-05-13 5:34 ` [Intel-gfx] " Manasi Navare
` (2 preceding siblings ...)
(?)
@ 2020-05-13 5:56 ` Patchwork
-1 siblings, 0 replies; 16+ messages in thread
From: Patchwork @ 2020-05-13 5:56 UTC (permalink / raw)
To: Manasi Navare; +Cc: intel-gfx
== Series Details ==
Series: series starting with [v5,1/3] drm/dp: DRM DP helper for reading Ignore MSA from DPCD
URL : https://patchwork.freedesktop.org/series/77204/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip
f6ad5ff374c2 drm/dp: DRM DP helper for reading Ignore MSA from DPCD
2aca669eeacd drm/i915/dp: Attach and set drm connector VRR property
a2b5aa381b03 drm/i915/dp: Expose connector VRR info via debugfs
-:73: WARNING:SYMBOLIC_PERMS: Symbolic permissions 'S_IRUGO' are not preferred. Consider using octal permissions '0444'.
#73: FILE: drivers/gpu/drm/i915/display/intel_display_debugfs.c:2242:
+ debugfs_create_file("vrr_range", S_IRUGO,
total: 0 errors, 1 warnings, 0 checks, 37 lines checked
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 16+ messages in thread
* [Intel-gfx] ✗ Fi.CI.BAT: failure for series starting with [v5,1/3] drm/dp: DRM DP helper for reading Ignore MSA from DPCD
2020-05-13 5:34 ` [Intel-gfx] " Manasi Navare
` (3 preceding siblings ...)
(?)
@ 2020-05-13 6:26 ` Patchwork
-1 siblings, 0 replies; 16+ messages in thread
From: Patchwork @ 2020-05-13 6:26 UTC (permalink / raw)
To: Manasi Navare; +Cc: intel-gfx
== Series Details ==
Series: series starting with [v5,1/3] drm/dp: DRM DP helper for reading Ignore MSA from DPCD
URL : https://patchwork.freedesktop.org/series/77204/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_8471 -> Patchwork_17638
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with Patchwork_17638 absolutely need to be
verified manually.
If you think the reported changes have nothing to do with the changes
introduced in Patchwork_17638, please notify your bug team to allow them
to document this new failure mode, which will reduce false positives in CI.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17638/index.html
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in Patchwork_17638:
### IGT changes ###
#### Possible regressions ####
* igt@kms_chamelium@dp-hpd-fast:
- fi-cml-u2: [PASS][1] -> [INCOMPLETE][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8471/fi-cml-u2/igt@kms_chamelium@dp-hpd-fast.html
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17638/fi-cml-u2/igt@kms_chamelium@dp-hpd-fast.html
- fi-kbl-7500u: [PASS][3] -> [INCOMPLETE][4]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8471/fi-kbl-7500u/igt@kms_chamelium@dp-hpd-fast.html
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17638/fi-kbl-7500u/igt@kms_chamelium@dp-hpd-fast.html
Known issues
------------
Here are the changes found in Patchwork_17638 that come from known issues:
### IGT changes ###
#### Possible fixes ####
* igt@i915_selftest@live@objects:
- fi-bwr-2160: [INCOMPLETE][5] ([i915#489]) -> [PASS][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8471/fi-bwr-2160/igt@i915_selftest@live@objects.html
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17638/fi-bwr-2160/igt@i915_selftest@live@objects.html
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[i915#1803]: https://gitlab.freedesktop.org/drm/intel/issues/1803
[i915#489]: https://gitlab.freedesktop.org/drm/intel/issues/489
Participating hosts (49 -> 12)
------------------------------
ERROR: It appears as if the changes made in Patchwork_17638 prevented too many machines from booting.
Missing (37): fi-kbl-soraka fi-bdw-gvtdvm fi-icl-u2 fi-apl-guc fi-snb-2520m fi-icl-y fi-skl-lmem fi-byt-n2820 fi-icl-guc fi-icl-dsi fi-skl-6600u fi-snb-2600 fi-bxt-dsi fi-bdw-5557u fi-cml-s fi-bsw-n3050 fi-byt-j1900 fi-glk-dsi fi-hsw-4770 fi-ivb-3770 fi-elk-e7500 fi-bsw-nick fi-skl-6700k2 fi-kbl-r fi-ilk-m540 fi-ehl-1 fi-skl-guc fi-cfl-8700k fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-cfl-guc fi-kbl-guc fi-whl-u fi-kbl-x1275 fi-bsw-kefka fi-byt-clapper
Build changes
-------------
* CI: CI-20190529 -> None
* Linux: CI_DRM_8471 -> Patchwork_17638
CI-20190529: 20190529
CI_DRM_8471: 3c84a88ed50e99b200fac400a9b817a23d399c01 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5651: e54e2642f1967ca3c488db32264607df670d1dfb @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_17638: a2b5aa381b03ce6944ec2f184d8383ea1a942b04 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
a2b5aa381b03 drm/i915/dp: Expose connector VRR info via debugfs
2aca669eeacd drm/i915/dp: Attach and set drm connector VRR property
f6ad5ff374c2 drm/dp: DRM DP helper for reading Ignore MSA from DPCD
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17638/index.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 16+ messages in thread
* [Intel-gfx] ✗ Fi.CI.BUILD: failure for series starting with [v5,1/3] drm/dp: DRM DP helper for reading Ignore MSA from DPCD (rev2)
2020-05-13 5:34 ` [Intel-gfx] " Manasi Navare
` (4 preceding siblings ...)
(?)
@ 2020-05-13 12:22 ` Patchwork
-1 siblings, 0 replies; 16+ messages in thread
From: Patchwork @ 2020-05-13 12:22 UTC (permalink / raw)
To: Modem, Bhanuprakash; +Cc: intel-gfx
== Series Details ==
Series: series starting with [v5,1/3] drm/dp: DRM DP helper for reading Ignore MSA from DPCD (rev2)
URL : https://patchwork.freedesktop.org/series/77204/
State : failure
== Summary ==
Applying: drm/dp: DRM DP helper for reading Ignore MSA from DPCD
Applying: drm/i915/dp: Attach and set drm connector VRR property
Applying: drm/i915/dp: Expose connector VRR info via debugfs
error: corrupt patch at line 40
error: could not build fake ancestor
hint: Use 'git am --show-current-patch=diff' to see the failed patch
Patch failed at 0003 drm/i915/dp: Expose connector VRR info via debugfs
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 16+ messages in thread
* [Intel-gfx] ✗ Fi.CI.BUILD: failure for series starting with [v5,1/3] drm/dp: DRM DP helper for reading Ignore MSA from DPCD (rev3)
2020-05-13 5:34 ` [Intel-gfx] " Manasi Navare
` (5 preceding siblings ...)
(?)
@ 2020-05-14 5:02 ` Patchwork
-1 siblings, 0 replies; 16+ messages in thread
From: Patchwork @ 2020-05-14 5:02 UTC (permalink / raw)
To: Modem, Bhanuprakash; +Cc: intel-gfx
== Series Details ==
Series: series starting with [v5,1/3] drm/dp: DRM DP helper for reading Ignore MSA from DPCD (rev3)
URL : https://patchwork.freedesktop.org/series/77204/
State : failure
== Summary ==
Applying: drm/dp: DRM DP helper for reading Ignore MSA from DPCD
Applying: drm/i915/dp: Attach and set drm connector VRR property
Applying: drm/i915/dp: Expose connector VRR info via debugfs
.git/rebase-apply/patch:40: trailing whitespace.
seq_printf(m, "Max: %u\n",
error: patch failed: drivers/gpu/drm/i915/display/intel_display_debugfs.c:2185
error: drivers/gpu/drm/i915/display/intel_display_debugfs.c: patch does not apply
error: Did you hand edit your patch?
It does not apply to blobs recorded in its index.
hint: Use 'git am --show-current-patch=diff' to see the failed patch
Using index info to reconstruct a base tree...
Patch failed at 0003 drm/i915/dp: Expose connector VRR info via debugfs
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 16+ messages in thread