From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH 00/20] drm/i915: Finish (de)gamma readout
Date: Sat, 18 Jul 2020 00:13:25 +0300 [thread overview]
Message-ID: <20200717211345.26851-1-ville.syrjala@linux.intel.com> (raw)
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
The gamma readout stuff was left half finished. No degamma
readout, and no readout whatsoever on ivb/bdw/skl/bxt.
Let's finish it. A bit more involved/ugly than I'd prefer
but there are certainly some complications with the way
some of the hw works.
There are a few fixes/cleanups at the start, and while we're
in there let's also throw in the 10bit gamma mode for gen2/3.
Ville Syrjälä (20):
drm/i915: Fix state checker hw.active/hw.enable readout
drm/i915: Move MST master transcoder dump earlier
drm/i915: Include the LUT sizes in the state dump
drm/i915: s/glk_read_lut_10/bdw_read_lut_10/
drm/i915: Reset glk degamma index after programming/readout
drm/i915: Shuffle chv_cgm_gamma_pack() around a bit
drm/i915: Relocate CHV CGM gamma masks
drm/i915: Add glk+ degamma readout
drm/i915: Read out CHV CGM degamma
drm/i915: Add gamma/degamma readout for bdw+
drm/i915: Do degamma+gamma readout in bdw+ split gamma mode
drm/i915: Polish bdw_read_lut_10() a bit
drm/i915: Add gamma/degamm readout for ivb/hsw
drm/i915: Replace some gamma_mode ifs with switches
drm/i915: Make ilk_load_luts() deal with degamma
drm/i915: Make ilk_read_luts() capable of degamma readout
drm/i915: Make .read_luts() mandatory
drm/i915: Extract ilk_crtc_has_gamma() & co.
drm/i915: Complete the gamma/degamma state checking
drm/i915: Add 10bit gamma mode for gen2/3
drivers/gpu/drm/i915/display/intel_color.c | 1015 +++++++++++++++---
drivers/gpu/drm/i915/display/intel_color.h | 10 +-
drivers/gpu/drm/i915/display/intel_display.c | 50 +-
drivers/gpu/drm/i915/i915_drv.h | 7 +
drivers/gpu/drm/i915/i915_pci.c | 10 +-
drivers/gpu/drm/i915/i915_reg.h | 47 +-
6 files changed, 975 insertions(+), 164 deletions(-)
--
2.26.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next reply other threads:[~2020-07-17 21:13 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-17 21:13 Ville Syrjala [this message]
2020-07-17 21:13 ` [Intel-gfx] [PATCH 01/20] drm/i915: Fix state checker hw.active/hw.enable readout Ville Syrjala
2020-09-17 19:20 ` Shankar, Uma
2020-07-17 21:13 ` [Intel-gfx] [PATCH 02/20] drm/i915: Move MST master transcoder dump earlier Ville Syrjala
2020-09-17 19:24 ` Shankar, Uma
2020-07-17 21:13 ` [Intel-gfx] [PATCH 03/20] drm/i915: Include the LUT sizes in the state dump Ville Syrjala
2020-09-17 19:27 ` Shankar, Uma
2020-07-17 21:13 ` [Intel-gfx] [PATCH 04/20] drm/i915: s/glk_read_lut_10/bdw_read_lut_10/ Ville Syrjala
2020-09-17 19:29 ` Shankar, Uma
2020-07-17 21:13 ` [Intel-gfx] [PATCH 05/20] drm/i915: Reset glk degamma index after programming/readout Ville Syrjala
2020-09-17 19:39 ` Shankar, Uma
2020-07-17 21:13 ` [Intel-gfx] [PATCH 06/20] drm/i915: Shuffle chv_cgm_gamma_pack() around a bit Ville Syrjala
2020-09-17 19:42 ` Shankar, Uma
2020-07-17 21:13 ` [Intel-gfx] [PATCH 07/20] drm/i915: Relocate CHV CGM gamma masks Ville Syrjala
2020-09-17 19:46 ` Shankar, Uma
2020-07-17 21:13 ` [Intel-gfx] [PATCH 08/20] drm/i915: Add glk+ degamma readout Ville Syrjala
2020-09-17 19:58 ` Shankar, Uma
2020-07-17 21:13 ` [Intel-gfx] [PATCH 09/20] drm/i915: Read out CHV CGM degamma Ville Syrjala
2020-09-17 20:06 ` Shankar, Uma
2020-07-17 21:13 ` [Intel-gfx] [PATCH 10/20] drm/i915: Add gamma/degamma readout for bdw+ Ville Syrjala
2020-09-17 20:15 ` Shankar, Uma
2020-07-17 21:13 ` [Intel-gfx] [PATCH 11/20] drm/i915: Do degamma+gamma readout in bdw+ split gamma mode Ville Syrjala
2020-09-17 20:40 ` Shankar, Uma
2020-07-17 21:13 ` [Intel-gfx] [PATCH 12/20] drm/i915: Polish bdw_read_lut_10() a bit Ville Syrjala
2020-09-17 20:43 ` Shankar, Uma
2020-07-17 21:13 ` [Intel-gfx] [PATCH 13/20] drm/i915: Add gamma/degamm readout for ivb/hsw Ville Syrjala
2020-09-17 20:46 ` Shankar, Uma
2020-07-17 21:13 ` [Intel-gfx] [PATCH 14/20] drm/i915: Replace some gamma_mode ifs with switches Ville Syrjala
2020-09-17 20:52 ` Shankar, Uma
2020-07-17 21:13 ` [Intel-gfx] [PATCH 15/20] drm/i915: Make ilk_load_luts() deal with degamma Ville Syrjala
2020-09-17 20:56 ` Shankar, Uma
2020-07-17 21:13 ` [Intel-gfx] [PATCH 16/20] drm/i915: Make ilk_read_luts() capable of degamma readout Ville Syrjala
2020-09-17 20:58 ` Shankar, Uma
2020-07-17 21:13 ` [Intel-gfx] [PATCH 17/20] drm/i915: Make .read_luts() mandatory Ville Syrjala
2020-09-17 21:00 ` Shankar, Uma
2020-07-17 21:13 ` [Intel-gfx] [PATCH 18/20] drm/i915: Extract ilk_crtc_has_gamma() & co Ville Syrjala
2020-09-17 21:03 ` Shankar, Uma
2020-07-17 21:13 ` [Intel-gfx] [PATCH 19/20] drm/i915: Complete the gamma/degamma state checking Ville Syrjala
2020-09-17 21:52 ` Shankar, Uma
2020-07-17 21:13 ` [Intel-gfx] [PATCH 20/20] drm/i915: Add 10bit gamma mode for gen2/3 Ville Syrjala
2020-09-21 19:40 ` Shankar, Uma
2020-07-17 21:21 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for drm/i915: Finish (de)gamma readout Patchwork
2020-07-17 21:43 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-07-17 22:46 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200717211345.26851-1-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.