[PATCH AUTOSEL 5.8 01/63] spi: stm32: clear only asserted irq flags on interrupt

[PATCH AUTOSEL 5.8 01/63] spi: stm32: clear only asserted irq flags on interrupt

[Sasha Levin]

From: Tobias Schramm <t.schramm@manjaro.org>

[ Upstream commit ae1ba50f1e706dfd7ce402ac52c1f1f10becad68 ]

Previously the stm32h7 interrupt thread cleared all non-masked interrupts.
If an interrupt was to occur during the handling of another interrupt its
flag would be unset, resulting in a lost interrupt.
This patches fixes the issue by clearing only the currently set interrupt
flags.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Link: https://lore.kernel.org/r/20200804195136.1485392-1-t.schramm@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-stm32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 4c643dfc7fbbc..4a21feae0103d 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -966,7 +966,7 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
 		if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))
 			stm32h7_spi_read_rxfifo(spi, false);
 
-	writel_relaxed(mask, spi->base + STM32H7_SPI_IFCR);
+	writel_relaxed(sr & mask, spi->base + STM32H7_SPI_IFCR);
 
 	spin_unlock_irqrestore(&spi->lock, flags);
 
-- 
2.25.1

[PATCH AUTOSEL 5.8 01/63] spi: stm32: clear only asserted irq flags on interrupt

[Sasha Levin]

From: Tobias Schramm <t.schramm@manjaro.org>

[ Upstream commit ae1ba50f1e706dfd7ce402ac52c1f1f10becad68 ]

Previously the stm32h7 interrupt thread cleared all non-masked interrupts.
If an interrupt was to occur during the handling of another interrupt its
flag would be unset, resulting in a lost interrupt.
This patches fixes the issue by clearing only the currently set interrupt
flags.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Link: https://lore.kernel.org/r/20200804195136.1485392-1-t.schramm@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-stm32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 4c643dfc7fbbc..4a21feae0103d 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -966,7 +966,7 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
 		if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))
 			stm32h7_spi_read_rxfifo(spi, false);
 
-	writel_relaxed(mask, spi->base + STM32H7_SPI_IFCR);
+	writel_relaxed(sr & mask, spi->base + STM32H7_SPI_IFCR);
 
 	spin_unlock_irqrestore(&spi->lock, flags);
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.8 02/63] jbd2: make sure jh have b_transaction set in refile/unfile_buffer

[Sasha Levin]

From: Lukas Czerner <lczerner@redhat.com>

[ Upstream commit 24dc9864914eb5813173cfa53313fcd02e4aea7d ]

Callers of __jbd2_journal_unfile_buffer() and
__jbd2_journal_refile_buffer() assume that the b_transaction is set. In
fact if it's not, we can end up with journal_head refcounting errors
leading to crash much later that might be very hard to track down. Add
asserts to make sure that is the case.

We also make sure that b_next_transaction is NULL in
__jbd2_journal_unfile_buffer() since the callers expect that as well and
we should not get into that stage in this state anyway, leading to
problems later on if we do.

Tested with fstests.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200617092549.6712-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jbd2/transaction.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index e91aad3637a23..e65e0aca28261 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -2026,6 +2026,9 @@ static void __jbd2_journal_temp_unlink_buffer(struct journal_head *jh)
  */
 static void __jbd2_journal_unfile_buffer(struct journal_head *jh)
 {
+	J_ASSERT_JH(jh, jh->b_transaction != NULL);
+	J_ASSERT_JH(jh, jh->b_next_transaction == NULL);
+
 	__jbd2_journal_temp_unlink_buffer(jh);
 	jh->b_transaction = NULL;
 }
@@ -2572,6 +2575,13 @@ bool __jbd2_journal_refile_buffer(struct journal_head *jh)
 
 	was_dirty = test_clear_buffer_jbddirty(bh);
 	__jbd2_journal_temp_unlink_buffer(jh);
+
+	/*
+	 * b_transaction must be set, otherwise the new b_transaction won't
+	 * be holding jh reference
+	 */
+	J_ASSERT_JH(jh, jh->b_transaction != NULL);
+
 	/*
 	 * We set b_transaction here because b_next_transaction will inherit
 	 * our jh reference and thus __jbd2_journal_file_buffer() must not
-- 
2.25.1

[PATCH AUTOSEL 5.8 03/63] ext4: don't BUG on inconsistent journal feature

[Sasha Levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit 11215630aada28307ba555a43138db6ac54fa825 ]

A customer has reported a BUG_ON in ext4_clear_journal_err() hitting
during an LTP testing. Either this has been caused by a test setup
issue where the filesystem was being overwritten while LTP was mounting
it or the journal replay has overwritten the superblock with invalid
data. In either case it is preferable we don't take the machine down
with a BUG_ON. So handle the situation of unexpectedly missing
has_journal feature more gracefully. We issue warning and fail the mount
in the cases where the race window is narrow and the failed check is
most likely a programming error. In cases where fs corruption is more
likely, we do full ext4_error() handling before failing mount / remount.

Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200710140759.18031-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/super.c | 68 ++++++++++++++++++++++++++++++++++---------------
 1 file changed, 47 insertions(+), 21 deletions(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 330957ed1f05c..9fdad843b30ef 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -66,10 +66,10 @@ static int ext4_load_journal(struct super_block *, struct ext4_super_block *,
 			     unsigned long journal_devnum);
 static int ext4_show_options(struct seq_file *seq, struct dentry *root);
 static int ext4_commit_super(struct super_block *sb, int sync);
-static void ext4_mark_recovery_complete(struct super_block *sb,
+static int ext4_mark_recovery_complete(struct super_block *sb,
 					struct ext4_super_block *es);
-static void ext4_clear_journal_err(struct super_block *sb,
-				   struct ext4_super_block *es);
+static int ext4_clear_journal_err(struct super_block *sb,
+				  struct ext4_super_block *es);
 static int ext4_sync_fs(struct super_block *sb, int wait);
 static int ext4_remount(struct super_block *sb, int *flags, char *data);
 static int ext4_statfs(struct dentry *dentry, struct kstatfs *buf);
@@ -4770,7 +4770,9 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	EXT4_SB(sb)->s_mount_state &= ~EXT4_ORPHAN_FS;
 	if (needs_recovery) {
 		ext4_msg(sb, KERN_INFO, "recovery complete");
-		ext4_mark_recovery_complete(sb, es);
+		err = ext4_mark_recovery_complete(sb, es);
+		if (err)
+			goto failed_mount8;
 	}
 	if (EXT4_SB(sb)->s_journal) {
 		if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA)
@@ -4813,10 +4815,8 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 		ext4_msg(sb, KERN_ERR, "VFS: Can't find ext4 filesystem");
 	goto failed_mount;
 
-#ifdef CONFIG_QUOTA
 failed_mount8:
 	ext4_unregister_sysfs(sb);
-#endif
 failed_mount7:
 	ext4_unregister_li_request(sb);
 failed_mount6:
@@ -4956,7 +4956,8 @@ static journal_t *ext4_get_journal(struct super_block *sb,
 	struct inode *journal_inode;
 	journal_t *journal;
 
-	BUG_ON(!ext4_has_feature_journal(sb));
+	if (WARN_ON_ONCE(!ext4_has_feature_journal(sb)))
+		return NULL;
 
 	journal_inode = ext4_get_journal_inode(sb, journal_inum);
 	if (!journal_inode)
@@ -4986,7 +4987,8 @@ static journal_t *ext4_get_dev_journal(struct super_block *sb,
 	struct ext4_super_block *es;
 	struct block_device *bdev;
 
-	BUG_ON(!ext4_has_feature_journal(sb));
+	if (WARN_ON_ONCE(!ext4_has_feature_journal(sb)))
+		return NULL;
 
 	bdev = ext4_blkdev_get(j_dev, sb);
 	if (bdev == NULL)
@@ -5078,7 +5080,8 @@ static int ext4_load_journal(struct super_block *sb,
 	int err = 0;
 	int really_read_only;
 
-	BUG_ON(!ext4_has_feature_journal(sb));
+	if (WARN_ON_ONCE(!ext4_has_feature_journal(sb)))
+		return -EFSCORRUPTED;
 
 	if (journal_devnum &&
 	    journal_devnum != le32_to_cpu(es->s_journal_dev)) {
@@ -5148,7 +5151,12 @@ static int ext4_load_journal(struct super_block *sb,
 	}
 
 	EXT4_SB(sb)->s_journal = journal;
-	ext4_clear_journal_err(sb, es);
+	err = ext4_clear_journal_err(sb, es);
+	if (err) {
+		EXT4_SB(sb)->s_journal = NULL;
+		jbd2_journal_destroy(journal);
+		return err;
+	}
 
 	if (!really_read_only && journal_devnum &&
 	    journal_devnum != le32_to_cpu(es->s_journal_dev)) {
@@ -5244,26 +5252,32 @@ static int ext4_commit_super(struct super_block *sb, int sync)
  * remounting) the filesystem readonly, then we will end up with a
  * consistent fs on disk.  Record that fact.
  */
-static void ext4_mark_recovery_complete(struct super_block *sb,
-					struct ext4_super_block *es)
+static int ext4_mark_recovery_complete(struct super_block *sb,
+				       struct ext4_super_block *es)
 {
+	int err;
 	journal_t *journal = EXT4_SB(sb)->s_journal;
 
 	if (!ext4_has_feature_journal(sb)) {
-		BUG_ON(journal != NULL);
-		return;
+		if (journal != NULL) {
+			ext4_error(sb, "Journal got removed while the fs was "
+				   "mounted!");
+			return -EFSCORRUPTED;
+		}
+		return 0;
 	}
 	jbd2_journal_lock_updates(journal);
-	if (jbd2_journal_flush(journal) < 0)
+	err = jbd2_journal_flush(journal);
+	if (err < 0)
 		goto out;
 
 	if (ext4_has_feature_journal_needs_recovery(sb) && sb_rdonly(sb)) {
 		ext4_clear_feature_journal_needs_recovery(sb);
 		ext4_commit_super(sb, 1);
 	}
-
 out:
 	jbd2_journal_unlock_updates(journal);
+	return err;
 }
 
 /*
@@ -5271,14 +5285,17 @@ static void ext4_mark_recovery_complete(struct super_block *sb,
  * has recorded an error from a previous lifetime, move that error to the
  * main filesystem now.
  */
-static void ext4_clear_journal_err(struct super_block *sb,
+static int ext4_clear_journal_err(struct super_block *sb,
 				   struct ext4_super_block *es)
 {
 	journal_t *journal;
 	int j_errno;
 	const char *errstr;
 
-	BUG_ON(!ext4_has_feature_journal(sb));
+	if (!ext4_has_feature_journal(sb)) {
+		ext4_error(sb, "Journal got removed while the fs was mounted!");
+		return -EFSCORRUPTED;
+	}
 
 	journal = EXT4_SB(sb)->s_journal;
 
@@ -5303,6 +5320,7 @@ static void ext4_clear_journal_err(struct super_block *sb,
 		jbd2_journal_clear_err(journal);
 		jbd2_journal_update_sb_errno(journal);
 	}
+	return 0;
 }
 
 /*
@@ -5573,8 +5591,13 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 			    (sbi->s_mount_state & EXT4_VALID_FS))
 				es->s_state = cpu_to_le16(sbi->s_mount_state);
 
-			if (sbi->s_journal)
+			if (sbi->s_journal) {
+				/*
+				 * We let remount-ro finish even if marking fs
+				 * as clean failed...
+				 */
 				ext4_mark_recovery_complete(sb, es);
+			}
 			if (sbi->s_mmp_tsk)
 				kthread_stop(sbi->s_mmp_tsk);
 		} else {
@@ -5622,8 +5645,11 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 			 * been changed by e2fsck since we originally mounted
 			 * the partition.)
 			 */
-			if (sbi->s_journal)
-				ext4_clear_journal_err(sb, es);
+			if (sbi->s_journal) {
+				err = ext4_clear_journal_err(sb, es);
+				if (err)
+					goto restore_opts;
+			}
 			sbi->s_mount_state = le16_to_cpu(es->s_state);
 
 			err = ext4_setup_super(sb, es, 0);
-- 
2.25.1

[PATCH AUTOSEL 5.8 04/63] ext4: handle read only external journal device

[Sasha Levin]

From: Lukas Czerner <lczerner@redhat.com>

[ Upstream commit 273108fa5015eeffc4bacfa5ce272af3434b96e4 ]

Ext4 uses blkdev_get_by_dev() to get the block_device for journal device
which does check to see if the read-only block device was opened
read-only.

As a result ext4 will hapily proceed mounting the file system with
external journal on read-only device. This is bad as we would not be
able to use the journal leading to errors later on.

Instead of simply failing to mount file system in this case, treat it in
a similar way we treat internal journal on read-only device. Allow to
mount with -o noload in read-only mode.

This can be reproduced easily like this:

mke2fs -F -O journal_dev $JOURNAL_DEV 100M
mkfs.$FSTYPE -F -J device=$JOURNAL_DEV $FS_DEV
blockdev --setro $JOURNAL_DEV
mount $FS_DEV $MNT
touch $MNT/file
umount $MNT

leading to error like this

[ 1307.318713] ------------[ cut here ]------------
[ 1307.323362] generic_make_request: Trying to write to read-only block-device dm-2 (partno 0)
[ 1307.331741] WARNING: CPU: 36 PID: 3224 at block/blk-core.c:855 generic_make_request_checks+0x2c3/0x580
[ 1307.341041] Modules linked in: ext4 mbcache jbd2 rfkill intel_rapl_msr intel_rapl_common isst_if_commd
[ 1307.419445] CPU: 36 PID: 3224 Comm: jbd2/dm-2 Tainted: G        W I       5.8.0-rc5 #2
[ 1307.427359] Hardware name: Dell Inc. PowerEdge R740/01KPX8, BIOS 2.3.10 08/15/2019
[ 1307.434932] RIP: 0010:generic_make_request_checks+0x2c3/0x580
[ 1307.440676] Code: 94 03 00 00 48 89 df 48 8d 74 24 08 c6 05 cf 2b 18 01 01 e8 7f a4 ff ff 48 c7 c7 50e
[ 1307.459420] RSP: 0018:ffffc0d70eb5fb48 EFLAGS: 00010286
[ 1307.464646] RAX: 0000000000000000 RBX: ffff9b33b2978300 RCX: 0000000000000000
[ 1307.471780] RDX: ffff9b33e12a81e0 RSI: ffff9b33e1298000 RDI: ffff9b33e1298000
[ 1307.478913] RBP: ffff9b7b9679e0c0 R08: 0000000000000837 R09: 0000000000000024
[ 1307.486044] R10: 0000000000000000 R11: ffffc0d70eb5f9f0 R12: 0000000000000400
[ 1307.493177] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000
[ 1307.500308] FS:  0000000000000000(0000) GS:ffff9b33e1280000(0000) knlGS:0000000000000000
[ 1307.508396] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1307.514142] CR2: 000055eaf4109000 CR3: 0000003dee40a006 CR4: 00000000007606e0
[ 1307.521273] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1307.528407] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1307.535538] PKRU: 55555554
[ 1307.538250] Call Trace:
[ 1307.540708]  generic_make_request+0x30/0x340
[ 1307.544985]  submit_bio+0x43/0x190
[ 1307.548393]  ? bio_add_page+0x62/0x90
[ 1307.552068]  submit_bh_wbc+0x16a/0x190
[ 1307.555833]  jbd2_write_superblock+0xec/0x200 [jbd2]
[ 1307.560803]  jbd2_journal_update_sb_log_tail+0x65/0xc0 [jbd2]
[ 1307.566557]  jbd2_journal_commit_transaction+0x2ae/0x1860 [jbd2]
[ 1307.572566]  ? check_preempt_curr+0x7a/0x90
[ 1307.576756]  ? update_curr+0xe1/0x1d0
[ 1307.580421]  ? account_entity_dequeue+0x7b/0xb0
[ 1307.584955]  ? newidle_balance+0x231/0x3d0
[ 1307.589056]  ? __switch_to_asm+0x42/0x70
[ 1307.592986]  ? __switch_to_asm+0x36/0x70
[ 1307.596918]  ? lock_timer_base+0x67/0x80
[ 1307.600851]  kjournald2+0xbd/0x270 [jbd2]
[ 1307.604873]  ? finish_wait+0x80/0x80
[ 1307.608460]  ? commit_timeout+0x10/0x10 [jbd2]
[ 1307.612915]  kthread+0x114/0x130
[ 1307.616152]  ? kthread_park+0x80/0x80
[ 1307.619816]  ret_from_fork+0x22/0x30
[ 1307.623400] ---[ end trace 27490236265b1630 ]---

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20200717090605.2612-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/super.c | 51 ++++++++++++++++++++++++++++++++-----------------
 1 file changed, 33 insertions(+), 18 deletions(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 9fdad843b30ef..dda967efcbc2c 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -5079,6 +5079,7 @@ static int ext4_load_journal(struct super_block *sb,
 	dev_t journal_dev;
 	int err = 0;
 	int really_read_only;
+	int journal_dev_ro;
 
 	if (WARN_ON_ONCE(!ext4_has_feature_journal(sb)))
 		return -EFSCORRUPTED;
@@ -5091,7 +5092,31 @@ static int ext4_load_journal(struct super_block *sb,
 	} else
 		journal_dev = new_decode_dev(le32_to_cpu(es->s_journal_dev));
 
-	really_read_only = bdev_read_only(sb->s_bdev);
+	if (journal_inum && journal_dev) {
+		ext4_msg(sb, KERN_ERR,
+			 "filesystem has both journal inode and journal device!");
+		return -EINVAL;
+	}
+
+	if (journal_inum) {
+		journal = ext4_get_journal(sb, journal_inum);
+		if (!journal)
+			return -EINVAL;
+	} else {
+		journal = ext4_get_dev_journal(sb, journal_dev);
+		if (!journal)
+			return -EINVAL;
+	}
+
+	journal_dev_ro = bdev_read_only(journal->j_dev);
+	really_read_only = bdev_read_only(sb->s_bdev) | journal_dev_ro;
+
+	if (journal_dev_ro && !sb_rdonly(sb)) {
+		ext4_msg(sb, KERN_ERR,
+			 "journal device read-only, try mounting with '-o ro'");
+		err = -EROFS;
+		goto err_out;
+	}
 
 	/*
 	 * Are we loading a blank journal or performing recovery after a
@@ -5106,27 +5131,14 @@ static int ext4_load_journal(struct super_block *sb,
 				ext4_msg(sb, KERN_ERR, "write access "
 					"unavailable, cannot proceed "
 					"(try mounting with noload)");
-				return -EROFS;
+				err = -EROFS;
+				goto err_out;
 			}
 			ext4_msg(sb, KERN_INFO, "write access will "
 			       "be enabled during recovery");
 		}
 	}
 
-	if (journal_inum && journal_dev) {
-		ext4_msg(sb, KERN_ERR, "filesystem has both journal "
-		       "and inode journals!");
-		return -EINVAL;
-	}
-
-	if (journal_inum) {
-		if (!(journal = ext4_get_journal(sb, journal_inum)))
-			return -EINVAL;
-	} else {
-		if (!(journal = ext4_get_dev_journal(sb, journal_dev)))
-			return -EINVAL;
-	}
-
 	if (!(journal->j_flags & JBD2_BARRIER))
 		ext4_msg(sb, KERN_INFO, "barriers disabled");
 
@@ -5146,8 +5158,7 @@ static int ext4_load_journal(struct super_block *sb,
 
 	if (err) {
 		ext4_msg(sb, KERN_ERR, "error loading journal");
-		jbd2_journal_destroy(journal);
-		return err;
+		goto err_out;
 	}
 
 	EXT4_SB(sb)->s_journal = journal;
@@ -5167,6 +5178,10 @@ static int ext4_load_journal(struct super_block *sb,
 	}
 
 	return 0;
+
+err_out:
+	jbd2_journal_destroy(journal);
+	return err;
 }
 
 static int ext4_commit_super(struct super_block *sb, int sync)
-- 
2.25.1

[PATCH AUTOSEL 5.8 05/63] ext4: skip non-loaded groups at cr=0/1 when scanning for good groups

[Sasha Levin]

From: Alex Zhuravlev <azhuravlev@whamcloud.com>

[ Upstream commit c1d2c7d47e15482bb23cda83a5021e60f624a09c ]

cr=0 is supposed to be an optimization to save CPU cycles, but if
buddy data (in memory) is not initialized then all this makes no sense
as we have to do sync IO taking a lot of cycles.  Also, at cr=0
mballoc doesn't choose any available chunk.  cr=1 also skips groups
using heuristic based on avg. fragment size.  It's more useful to skip
such groups and switch to cr=2 where groups will be scanned for
available chunks.  However, we always read the first block group in a
flex_bg so metadata blocks will get read into the first flex_bg if
possible.

Using sparse image and dm-slow virtual device of 120TB was
simulated, then the image was formatted and filled using debugfs to
mark ~85% of available space as busy.  mount process w/o the patch
couldn't complete in half an hour (according to vmstat it would take
~10-11 hours).  With the patch applied mount took ~20 seconds.

Lustre-bug-id: https://jira.whamcloud.com/browse/LU-12988
Signed-off-by: Alex Zhuravlev <azhuravlev@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Artem Blagodarenko <artem.blagodarenko@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/mballoc.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index c0a331e2feb02..9ed108b5bd7fd 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2177,6 +2177,7 @@ static int ext4_mb_good_group_nolock(struct ext4_allocation_context *ac,
 {
 	struct ext4_group_info *grp = ext4_get_group_info(ac->ac_sb, group);
 	struct super_block *sb = ac->ac_sb;
+	struct ext4_sb_info *sbi = EXT4_SB(sb);
 	bool should_lock = ac->ac_flags & EXT4_MB_STRICT_CHECK;
 	ext4_grpblk_t free;
 	int ret = 0;
@@ -2195,7 +2196,25 @@ static int ext4_mb_good_group_nolock(struct ext4_allocation_context *ac,
 
 	/* We only do this if the grp has never been initialized */
 	if (unlikely(EXT4_MB_GRP_NEED_INIT(grp))) {
-		ret = ext4_mb_init_group(ac->ac_sb, group, GFP_NOFS);
+		struct ext4_group_desc *gdp =
+			ext4_get_group_desc(sb, group, NULL);
+		int ret;
+
+		/* cr=0/1 is a very optimistic search to find large
+		 * good chunks almost for free.  If buddy data is not
+		 * ready, then this optimization makes no sense.  But
+		 * we never skip the first block group in a flex_bg,
+		 * since this gets used for metadata block allocation,
+		 * and we want to make sure we locate metadata blocks
+		 * in the first block group in the flex_bg if possible.
+		 */
+		if (cr < 2 &&
+		    (!sbi->s_log_groups_per_flex ||
+		     ((group & ((1 << sbi->s_log_groups_per_flex) - 1)) != 0)) &&
+		    !(ext4_has_group_desc_csum(sb) &&
+		      (gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT))))
+			return 0;
+		ret = ext4_mb_init_group(sb, group, GFP_NOFS);
 		if (ret)
 			return ret;
 	}
-- 
2.25.1

[PATCH AUTOSEL 5.8 06/63] drm/virtio: fix memory leak in virtio_gpu_cleanup_object()

[Sasha Levin]

From: Xin He <hexin.op@bytedance.com>

[ Upstream commit 836b194d65782aaec4485a07d2aab52d3f698505 ]

Before setting shmem->pages to NULL, kfree() should
be called.

Signed-off-by: Xin He <hexin.op@bytedance.com>
Reviewed-by: Qi Liu <liuqi.16@bytedance.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200722051851.72662-1-hexin.op@bytedance.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/virtio/virtgpu_object.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/virtio/virtgpu_object.c b/drivers/gpu/drm/virtio/virtgpu_object.c
index 6ccbd01cd888c..703b5cd517519 100644
--- a/drivers/gpu/drm/virtio/virtgpu_object.c
+++ b/drivers/gpu/drm/virtio/virtgpu_object.c
@@ -79,6 +79,7 @@ void virtio_gpu_cleanup_object(struct virtio_gpu_object *bo)
 			}
 
 			sg_free_table(shmem->pages);
+			kfree(shmem->pages);
 			shmem->pages = NULL;
 			drm_gem_shmem_unpin(&bo->base.base);
 		}
-- 
2.25.1

[PATCH AUTOSEL 5.8 06/63] drm/virtio: fix memory leak in virtio_gpu_cleanup_object()

[Sasha Levin]

From: Xin He <hexin.op@bytedance.com>

[ Upstream commit 836b194d65782aaec4485a07d2aab52d3f698505 ]

Before setting shmem->pages to NULL, kfree() should
be called.

Signed-off-by: Xin He <hexin.op@bytedance.com>
Reviewed-by: Qi Liu <liuqi.16@bytedance.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200722051851.72662-1-hexin.op@bytedance.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/virtio/virtgpu_object.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/virtio/virtgpu_object.c b/drivers/gpu/drm/virtio/virtgpu_object.c
index 6ccbd01cd888c..703b5cd517519 100644
--- a/drivers/gpu/drm/virtio/virtgpu_object.c
+++ b/drivers/gpu/drm/virtio/virtgpu_object.c
@@ -79,6 +79,7 @@ void virtio_gpu_cleanup_object(struct virtio_gpu_object *bo)
 			}
 
 			sg_free_table(shmem->pages);
+			kfree(shmem->pages);
 			shmem->pages = NULL;
 			drm_gem_shmem_unpin(&bo->base.base);
 		}
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.8 06/63] drm/virtio: fix memory leak in virtio_gpu_cleanup_object()

[Sasha Levin]

From: Xin He <hexin.op@bytedance.com>

[ Upstream commit 836b194d65782aaec4485a07d2aab52d3f698505 ]

Before setting shmem->pages to NULL, kfree() should
be called.

Signed-off-by: Xin He <hexin.op@bytedance.com>
Reviewed-by: Qi Liu <liuqi.16@bytedance.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200722051851.72662-1-hexin.op@bytedance.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/virtio/virtgpu_object.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/virtio/virtgpu_object.c b/drivers/gpu/drm/virtio/virtgpu_object.c
index 6ccbd01cd888c..703b5cd517519 100644
--- a/drivers/gpu/drm/virtio/virtgpu_object.c
+++ b/drivers/gpu/drm/virtio/virtgpu_object.c
@@ -79,6 +79,7 @@ void virtio_gpu_cleanup_object(struct virtio_gpu_object *bo)
 			}
 
 			sg_free_table(shmem->pages);
+			kfree(shmem->pages);
 			shmem->pages = NULL;
 			drm_gem_shmem_unpin(&bo->base.base);
 		}
-- 
2.25.1

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH AUTOSEL 5.8 07/63] ext4: abort the filesystem if failed to async write metadata buffer

[Sasha Levin]

From: "zhangyi (F)" <yi.zhang@huawei.com>

[ Upstream commit bc71726c725767205757821df364acff87f92ac5 ]

There is a risk of filesystem inconsistency if we failed to async write
back metadata buffer in the background. Because of current buffer's end
io procedure is handled by end_buffer_async_write() in the block layer,
and it only clear the buffer's uptodate flag and mark the write_io_error
flag, so ext4 cannot detect such failure immediately. In most cases of
getting metadata buffer (e.g. ext4_read_inode_bitmap()), although the
buffer's data is actually uptodate, it may still read data from disk
because the buffer's uptodate flag has been cleared. Finally, it may
lead to on-disk filesystem inconsistency if reading old data from the
disk successfully and write them out again.

This patch detect bdev mapping->wb_err when getting journal's write
access and mark the filesystem error if bdev's mapping->wb_err was
increased, this could prevent further writing and potential
inconsistency.

Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200620025427.1756360-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/ext4.h      |  3 +++
 fs/ext4/ext4_jbd2.c | 25 +++++++++++++++++++++++++
 fs/ext4/super.c     | 17 +++++++++++++++++
 3 files changed, 45 insertions(+)

diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 42f5060f3cdf1..6a76bd94277f0 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -1585,6 +1585,9 @@ struct ext4_sb_info {
 #ifdef CONFIG_EXT4_DEBUG
 	unsigned long s_simulate_fail;
 #endif
+	/* Record the errseq of the backing block device */
+	errseq_t s_bdev_wb_err;
+	spinlock_t s_bdev_wb_lock;
 };
 
 static inline struct ext4_sb_info *EXT4_SB(struct super_block *sb)
diff --git a/fs/ext4/ext4_jbd2.c b/fs/ext4/ext4_jbd2.c
index 0c76cdd44d90d..760b9ee49dc00 100644
--- a/fs/ext4/ext4_jbd2.c
+++ b/fs/ext4/ext4_jbd2.c
@@ -195,6 +195,28 @@ static void ext4_journal_abort_handle(const char *caller, unsigned int line,
 	jbd2_journal_abort_handle(handle);
 }
 
+static void ext4_check_bdev_write_error(struct super_block *sb)
+{
+	struct address_space *mapping = sb->s_bdev->bd_inode->i_mapping;
+	struct ext4_sb_info *sbi = EXT4_SB(sb);
+	int err;
+
+	/*
+	 * If the block device has write error flag, it may have failed to
+	 * async write out metadata buffers in the background. In this case,
+	 * we could read old data from disk and write it out again, which
+	 * may lead to on-disk filesystem inconsistency.
+	 */
+	if (errseq_check(&mapping->wb_err, READ_ONCE(sbi->s_bdev_wb_err))) {
+		spin_lock(&sbi->s_bdev_wb_lock);
+		err = errseq_check_and_advance(&mapping->wb_err, &sbi->s_bdev_wb_err);
+		spin_unlock(&sbi->s_bdev_wb_lock);
+		if (err)
+			ext4_error_err(sb, -err,
+				       "Error while async write back metadata");
+	}
+}
+
 int __ext4_journal_get_write_access(const char *where, unsigned int line,
 				    handle_t *handle, struct buffer_head *bh)
 {
@@ -202,6 +224,9 @@ int __ext4_journal_get_write_access(const char *where, unsigned int line,
 
 	might_sleep();
 
+	if (bh->b_bdev->bd_super)
+		ext4_check_bdev_write_error(bh->b_bdev->bd_super);
+
 	if (ext4_handle_valid(handle)) {
 		err = jbd2_journal_get_write_access(handle, bh);
 		if (err)
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index dda967efcbc2c..c77b10257b36a 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -4765,6 +4765,15 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	}
 #endif  /* CONFIG_QUOTA */
 
+	/*
+	 * Save the original bdev mapping's wb_err value which could be
+	 * used to detect the metadata async write error.
+	 */
+	spin_lock_init(&sbi->s_bdev_wb_lock);
+	if (!sb_rdonly(sb))
+		errseq_check_and_advance(&sb->s_bdev->bd_inode->i_mapping->wb_err,
+					 &sbi->s_bdev_wb_err);
+	sb->s_bdev->bd_super = sb;
 	EXT4_SB(sb)->s_mount_state |= EXT4_ORPHAN_FS;
 	ext4_orphan_cleanup(sb, es);
 	EXT4_SB(sb)->s_mount_state &= ~EXT4_ORPHAN_FS;
@@ -5654,6 +5663,14 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 				goto restore_opts;
 			}
 
+			/*
+			 * Update the original bdev mapping's wb_err value
+			 * which could be used to detect the metadata async
+			 * write error.
+			 */
+			errseq_check_and_advance(&sb->s_bdev->bd_inode->i_mapping->wb_err,
+						 &sbi->s_bdev_wb_err);
+
 			/*
 			 * Mounting a RDONLY partition read-write, so reread
 			 * and store the current valid flag.  (It may have
-- 
2.25.1

[PATCH AUTOSEL 5.8 08/63] jbd2: abort journal if free a async write error metadata buffer

[Sasha Levin]

From: "zhangyi (F)" <yi.zhang@huawei.com>

[ Upstream commit c044f3d8360d2ecf831ba2cc9f08cf9fb2c699fb ]

If we free a metadata buffer which has been failed to async write out
in the background, the jbd2 checkpoint procedure will not detect this
failure in jbd2_log_do_checkpoint(), so it may lead to filesystem
inconsistency after cleanup journal tail. This patch abort the journal
if free a buffer has write_io_error flag to prevent potential further
inconsistency.

Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20200620025427.1756360-5-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jbd2/transaction.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index e65e0aca28261..6250c9faa4cbe 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -2120,6 +2120,7 @@ int jbd2_journal_try_to_free_buffers(journal_t *journal,
 {
 	struct buffer_head *head;
 	struct buffer_head *bh;
+	bool has_write_io_error = false;
 	int ret = 0;
 
 	J_ASSERT(PageLocked(page));
@@ -2144,11 +2145,26 @@ int jbd2_journal_try_to_free_buffers(journal_t *journal,
 		jbd2_journal_put_journal_head(jh);
 		if (buffer_jbd(bh))
 			goto busy;
+
+		/*
+		 * If we free a metadata buffer which has been failed to
+		 * write out, the jbd2 checkpoint procedure will not detect
+		 * this failure and may lead to filesystem inconsistency
+		 * after cleanup journal tail.
+		 */
+		if (buffer_write_io_error(bh)) {
+			pr_err("JBD2: Error while async write back metadata bh %llu.",
+			       (unsigned long long)bh->b_blocknr);
+			has_write_io_error = true;
+		}
 	} while ((bh = bh->b_this_page) != head);
 
 	ret = try_to_free_buffers(page);
 
 busy:
+	if (has_write_io_error)
+		jbd2_journal_abort(journal, -EIO);
+
 	return ret;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 5.8 09/63] ext4: handle option set by mount flags correctly

[Sasha Levin]

From: Lukas Czerner <lczerner@redhat.com>

[ Upstream commit f25391ebb475d3ffb3aa61bb90e3594c841749ef ]

Currently there is a problem with mount options that can be both set by
vfs using mount flags or by a string parsing in ext4.

i_version/iversion options gets lost after remount, for example

$ mount -o i_version /dev/pmem0 /mnt
$ grep pmem0 /proc/self/mountinfo | grep i_version
310 95 259:0 / /mnt rw,relatime shared:163 - ext4 /dev/pmem0 rw,seclabel,i_version
$ mount -o remount,ro /mnt
$ grep pmem0 /proc/self/mountinfo | grep i_version

nolazytime gets ignored by ext4 on remount, for example

$ mount -o lazytime /dev/pmem0 /mnt
$ grep pmem0 /proc/self/mountinfo | grep lazytime
310 95 259:0 / /mnt rw,relatime shared:163 - ext4 /dev/pmem0 rw,lazytime,seclabel
$ mount -o remount,nolazytime /mnt
$ grep pmem0 /proc/self/mountinfo | grep lazytime
310 95 259:0 / /mnt rw,relatime shared:163 - ext4 /dev/pmem0 rw,lazytime,seclabel

Fix it by applying the SB_LAZYTIME and SB_I_VERSION flags from *flags to
s_flags before we parse the option and use the resulting state of the
same flags in *flags at the end of successful remount.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200723150526.19931-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/super.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index c77b10257b36a..85849e5b31b28 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -5487,7 +5487,7 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 {
 	struct ext4_super_block *es;
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
-	unsigned long old_sb_flags;
+	unsigned long old_sb_flags, vfs_flags;
 	struct ext4_mount_options old_opts;
 	int enable_quota = 0;
 	ext4_group_t g;
@@ -5530,6 +5530,14 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 	if (sbi->s_journal && sbi->s_journal->j_task->io_context)
 		journal_ioprio = sbi->s_journal->j_task->io_context->ioprio;
 
+	/*
+	 * Some options can be enabled by ext4 and/or by VFS mount flag
+	 * either way we need to make sure it matches in both *flags and
+	 * s_flags. Copy those selected flags from *flags to s_flags
+	 */
+	vfs_flags = SB_LAZYTIME | SB_I_VERSION;
+	sb->s_flags = (sb->s_flags & ~vfs_flags) | (*flags & vfs_flags);
+
 	if (!parse_options(data, sb, NULL, &journal_ioprio, 1)) {
 		err = -EINVAL;
 		goto restore_opts;
@@ -5583,9 +5591,6 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 		set_task_ioprio(sbi->s_journal->j_task, journal_ioprio);
 	}
 
-	if (*flags & SB_LAZYTIME)
-		sb->s_flags |= SB_LAZYTIME;
-
 	if ((bool)(*flags & SB_RDONLY) != sb_rdonly(sb)) {
 		if (sbi->s_mount_flags & EXT4_MF_FS_ABORTED) {
 			err = -EROFS;
@@ -5733,7 +5738,13 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 	}
 #endif
 
-	*flags = (*flags & ~SB_LAZYTIME) | (sb->s_flags & SB_LAZYTIME);
+	/*
+	 * Some options can be enabled by ext4 and/or by VFS mount flag
+	 * either way we need to make sure it matches in both *flags and
+	 * s_flags. Copy those selected flags from s_flags to *flags
+	 */
+	*flags = (*flags & ~vfs_flags) | (sb->s_flags & vfs_flags);
+
 	ext4_msg(sb, KERN_INFO, "re-mounted. Opts: %s", orig_data);
 	kfree(orig_data);
 	return 0;
-- 
2.25.1

[PATCH AUTOSEL 5.8 10/63] ext4: handle error of ext4_setup_system_zone() on remount

[Sasha Levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit d176b1f62f242ab259ff665a26fbac69db1aecba ]

ext4_setup_system_zone() can fail. Handle the failure in ext4_remount().

Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200728130437.7804-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/super.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 85849e5b31b28..54d1c09329e55 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -5716,7 +5716,10 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 		ext4_register_li_request(sb, first_not_zeroed);
 	}
 
-	ext4_setup_system_zone(sb);
+	err = ext4_setup_system_zone(sb);
+	if (err)
+		goto restore_opts;
+
 	if (sbi->s_journal == NULL && !(old_sb_flags & SB_RDONLY)) {
 		err = ext4_commit_super(sb, 1);
 		if (err)
-- 
2.25.1

[PATCH AUTOSEL 5.8 11/63] ext4: correctly restore system zone info when remount fails

[Sasha Levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit 0f5bde1db174f6c471f0bd27198575719dabe3e5 ]

When remounting filesystem fails late during remount handling and
block_validity mount option is also changed during the remount, we fail
to restore system zone information to a state matching the mount option.
This is mostly harmless, just the block validity checking will not match
the situation described by the mount option. Make sure these two are always
consistent.

Reported-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200728130437.7804-7-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/block_validity.c |  8 --------
 fs/ext4/super.c          | 29 +++++++++++++++++++++--------
 2 files changed, 21 insertions(+), 16 deletions(-)

diff --git a/fs/ext4/block_validity.c b/fs/ext4/block_validity.c
index 16e9b2fda03ae..30ff442453ff0 100644
--- a/fs/ext4/block_validity.c
+++ b/fs/ext4/block_validity.c
@@ -262,14 +262,6 @@ int ext4_setup_system_zone(struct super_block *sb)
 	int flex_size = ext4_flex_bg_size(sbi);
 	int ret;
 
-	if (!test_opt(sb, BLOCK_VALIDITY)) {
-		if (sbi->system_blks)
-			ext4_release_system_zone(sb);
-		return 0;
-	}
-	if (sbi->system_blks)
-		return 0;
-
 	system_blks = kzalloc(sizeof(*system_blks), GFP_KERNEL);
 	if (!system_blks)
 		return -ENOMEM;
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 54d1c09329e55..4c8253188d8df 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -4698,11 +4698,13 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 
 	ext4_set_resv_clusters(sb);
 
-	err = ext4_setup_system_zone(sb);
-	if (err) {
-		ext4_msg(sb, KERN_ERR, "failed to initialize system "
-			 "zone (%d)", err);
-		goto failed_mount4a;
+	if (test_opt(sb, BLOCK_VALIDITY)) {
+		err = ext4_setup_system_zone(sb);
+		if (err) {
+			ext4_msg(sb, KERN_ERR, "failed to initialize system "
+				 "zone (%d)", err);
+			goto failed_mount4a;
+		}
 	}
 
 	ext4_ext_init(sb);
@@ -5716,9 +5718,16 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 		ext4_register_li_request(sb, first_not_zeroed);
 	}
 
-	err = ext4_setup_system_zone(sb);
-	if (err)
-		goto restore_opts;
+	/*
+	 * Handle creation of system zone data early because it can fail.
+	 * Releasing of existing data is done when we are sure remount will
+	 * succeed.
+	 */
+	if (test_opt(sb, BLOCK_VALIDITY) && !sbi->system_blks) {
+		err = ext4_setup_system_zone(sb);
+		if (err)
+			goto restore_opts;
+	}
 
 	if (sbi->s_journal == NULL && !(old_sb_flags & SB_RDONLY)) {
 		err = ext4_commit_super(sb, 1);
@@ -5740,6 +5749,8 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 		}
 	}
 #endif
+	if (!test_opt(sb, BLOCK_VALIDITY) && sbi->system_blks)
+		ext4_release_system_zone(sb);
 
 	/*
 	 * Some options can be enabled by ext4 and/or by VFS mount flag
@@ -5761,6 +5772,8 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 	sbi->s_commit_interval = old_opts.s_commit_interval;
 	sbi->s_min_batch_time = old_opts.s_min_batch_time;
 	sbi->s_max_batch_time = old_opts.s_max_batch_time;
+	if (!test_opt(sb, BLOCK_VALIDITY) && sbi->system_blks)
+		ext4_release_system_zone(sb);
 #ifdef CONFIG_QUOTA
 	sbi->s_jquota_fmt = old_opts.s_jquota_fmt;
 	for (i = 0; i < EXT4_MAXQUOTAS; i++) {
-- 
2.25.1

[PATCH AUTOSEL 5.8 12/63] fs: prevent BUG_ON in submit_bh_wbc()

[Sasha Levin]

From: Xianting Tian <xianting_tian@126.com>

[ Upstream commit 377254b2cd2252c7c3151b113cbdf93a7736c2e9 ]

If a device is hot-removed --- for example, when a physical device is
unplugged from pcie slot or a nbd device's network is shutdown ---
this can result in a BUG_ON() crash in submit_bh_wbc().  This is
because the when the block device dies, the buffer heads will have
their Buffer_Mapped flag get cleared, leading to the crash in
submit_bh_wbc.

We had attempted to work around this problem in commit a17712c8
("ext4: check superblock mapped prior to committing").  Unfortunately,
it's still possible to hit the BUG_ON(!buffer_mapped(bh)) if the
device dies between when the work-around check in ext4_commit_super()
and when submit_bh_wbh() is finally called:

Code path:
ext4_commit_super
    judge if 'buffer_mapped(sbh)' is false, return <== commit a17712c8
          lock_buffer(sbh)
          ...
          unlock_buffer(sbh)
               __sync_dirty_buffer(sbh,...
                    lock_buffer(sbh)
                        judge if 'buffer_mapped(sbh))' is false, return <== added by this patch
                            submit_bh(...,sbh)
                                submit_bh_wbc(...,sbh,...)

[100722.966497] kernel BUG at fs/buffer.c:3095! <== BUG_ON(!buffer_mapped(bh))' in submit_bh_wbc()
[100722.966503] invalid opcode: 0000 [#1] SMP
[100722.966566] task: ffff8817e15a9e40 task.stack: ffffc90024744000
[100722.966574] RIP: 0010:submit_bh_wbc+0x180/0x190
[100722.966575] RSP: 0018:ffffc90024747a90 EFLAGS: 00010246
[100722.966576] RAX: 0000000000620005 RBX: ffff8818a80603a8 RCX: 0000000000000000
[100722.966576] RDX: ffff8818a80603a8 RSI: 0000000000020800 RDI: 0000000000000001
[100722.966577] RBP: ffffc90024747ac0 R08: 0000000000000000 R09: ffff88207f94170d
[100722.966578] R10: 00000000000437c8 R11: 0000000000000001 R12: 0000000000020800
[100722.966578] R13: 0000000000000001 R14: 000000000bf9a438 R15: ffff88195f333000
[100722.966580] FS:  00007fa2eee27700(0000) GS:ffff88203d840000(0000) knlGS:0000000000000000
[100722.966580] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[100722.966581] CR2: 0000000000f0b008 CR3: 000000201a622003 CR4: 00000000007606e0
[100722.966582] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[100722.966583] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[100722.966583] PKRU: 55555554
[100722.966583] Call Trace:
[100722.966588]  __sync_dirty_buffer+0x6e/0xd0
[100722.966614]  ext4_commit_super+0x1d8/0x290 [ext4]
[100722.966626]  __ext4_std_error+0x78/0x100 [ext4]
[100722.966635]  ? __ext4_journal_get_write_access+0xca/0x120 [ext4]
[100722.966646]  ext4_reserve_inode_write+0x58/0xb0 [ext4]
[100722.966655]  ? ext4_dirty_inode+0x48/0x70 [ext4]
[100722.966663]  ext4_mark_inode_dirty+0x53/0x1e0 [ext4]
[100722.966671]  ? __ext4_journal_start_sb+0x6d/0xf0 [ext4]
[100722.966679]  ext4_dirty_inode+0x48/0x70 [ext4]
[100722.966682]  __mark_inode_dirty+0x17f/0x350
[100722.966686]  generic_update_time+0x87/0xd0
[100722.966687]  touch_atime+0xa9/0xd0
[100722.966690]  generic_file_read_iter+0xa09/0xcd0
[100722.966694]  ? page_cache_tree_insert+0xb0/0xb0
[100722.966704]  ext4_file_read_iter+0x4a/0x100 [ext4]
[100722.966707]  ? __inode_security_revalidate+0x4f/0x60
[100722.966709]  __vfs_read+0xec/0x160
[100722.966711]  vfs_read+0x8c/0x130
[100722.966712]  SyS_pread64+0x87/0xb0
[100722.966716]  do_syscall_64+0x67/0x1b0
[100722.966719]  entry_SYSCALL64_slow_path+0x25/0x25

To address this, add the check of 'buffer_mapped(bh)' to
__sync_dirty_buffer().  This also has the benefit of fixing this for
other file systems.

With this addition, we can drop the workaround in ext4_commit_supper().

[ Commit description rewritten by tytso. ]

Signed-off-by: Xianting Tian <xianting_tian@126.com>
Link: https://lore.kernel.org/r/1596211825-8750-1-git-send-email-xianting_tian@126.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/buffer.c     | 9 +++++++++
 fs/ext4/super.c | 7 -------
 2 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/fs/buffer.c b/fs/buffer.c
index 64fe82ec65ff1..75a8849abb5d2 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -3160,6 +3160,15 @@ int __sync_dirty_buffer(struct buffer_head *bh, int op_flags)
 	WARN_ON(atomic_read(&bh->b_count) < 1);
 	lock_buffer(bh);
 	if (test_clear_buffer_dirty(bh)) {
+		/*
+		 * The bh should be mapped, but it might not be if the
+		 * device was hot-removed. Not much we can do but fail the I/O.
+		 */
+		if (!buffer_mapped(bh)) {
+			unlock_buffer(bh);
+			return -EIO;
+		}
+
 		get_bh(bh);
 		bh->b_end_io = end_buffer_write_sync;
 		ret = submit_bh(REQ_OP_WRITE, op_flags, bh);
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 4c8253188d8df..f3614299ffd09 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -5204,13 +5204,6 @@ static int ext4_commit_super(struct super_block *sb, int sync)
 	if (!sbh || block_device_ejected(sb))
 		return error;
 
-	/*
-	 * The superblock bh should be mapped, but it might not be if the
-	 * device was hot-removed. Not much we can do but fail the I/O.
-	 */
-	if (!buffer_mapped(sbh))
-		return error;
-
 	/*
 	 * If the file system is mounted read-only, don't update the
 	 * superblock write time.  This avoids updating the superblock
-- 
2.25.1

[PATCH AUTOSEL 5.8 13/63] spi: stm32h7: fix race condition at end of transfer

[Sasha Levin]

From: Antonio Borneo <antonio.borneo@st.com>

[ Upstream commit 135dd873d3c76d812ae64c668adef3f2c59ed27f ]

The caller of stm32_spi_transfer_one(), spi_transfer_one_message(),
is waiting for us to call spi_finalize_current_transfer() and will
eventually schedule a new transfer, if available.
We should guarantee that the spi controller is really available
before calling spi_finalize_current_transfer().

Move the call to spi_finalize_current_transfer() _after_ the call
to stm32_spi_disable().

Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/1597043558-29668-2-git-send-email-alain.volmat@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-stm32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 4a21feae0103d..814a3ec3b8ada 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -971,8 +971,8 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
 	spin_unlock_irqrestore(&spi->lock, flags);
 
 	if (end) {
-		spi_finalize_current_transfer(master);
 		stm32h7_spi_disable(spi);
+		spi_finalize_current_transfer(master);
 	}
 
 	return IRQ_HANDLED;
-- 
2.25.1

[PATCH AUTOSEL 5.8 13/63] spi: stm32h7: fix race condition at end of transfer

[Sasha Levin]

From: Antonio Borneo <antonio.borneo@st.com>

[ Upstream commit 135dd873d3c76d812ae64c668adef3f2c59ed27f ]

The caller of stm32_spi_transfer_one(), spi_transfer_one_message(),
is waiting for us to call spi_finalize_current_transfer() and will
eventually schedule a new transfer, if available.
We should guarantee that the spi controller is really available
before calling spi_finalize_current_transfer().

Move the call to spi_finalize_current_transfer() _after_ the call
to stm32_spi_disable().

Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/1597043558-29668-2-git-send-email-alain.volmat@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-stm32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 4a21feae0103d..814a3ec3b8ada 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -971,8 +971,8 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
 	spin_unlock_irqrestore(&spi->lock, flags);
 
 	if (end) {
-		spi_finalize_current_transfer(master);
 		stm32h7_spi_disable(spi);
+		spi_finalize_current_transfer(master);
 	}
 
 	return IRQ_HANDLED;
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.8 14/63] spi: stm32: fix fifo threshold level in case of short transfer

[Sasha Levin]

From: Amelie Delaunay <amelie.delaunay@st.com>

[ Upstream commit 3373e9004acc0603242622b4378c64bc01d21b5f ]

When transfer is shorter than half of the fifo, set the data packet size
up to transfer size instead of up to half of the fifo.
Check also that threshold is set at least to 1 data frame.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/1597043558-29668-3-git-send-email-alain.volmat@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-stm32.c | 26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 814a3ec3b8ada..e5450233f3f8b 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -467,20 +467,27 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz,
 /**
  * stm32h7_spi_prepare_fthlv - Determine FIFO threshold level
  * @spi: pointer to the spi controller data structure
+ * @xfer_len: length of the message to be transferred
  */
-static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi)
+static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi, u32 xfer_len)
 {
-	u32 fthlv, half_fifo;
+	u32 fthlv, half_fifo, packet;
 
 	/* data packet should not exceed 1/2 of fifo space */
 	half_fifo = (spi->fifo_size / 2);
 
+	/* data_packet should not exceed transfer length */
+	if (half_fifo > xfer_len)
+		packet = xfer_len;
+	else
+		packet = half_fifo;
+
 	if (spi->cur_bpw <= 8)
-		fthlv = half_fifo;
+		fthlv = packet;
 	else if (spi->cur_bpw <= 16)
-		fthlv = half_fifo / 2;
+		fthlv = packet / 2;
 	else
-		fthlv = half_fifo / 4;
+		fthlv = packet / 4;
 
 	/* align packet size with data registers access */
 	if (spi->cur_bpw > 8)
@@ -488,6 +495,9 @@ static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi)
 	else
 		fthlv -= (fthlv % 4); /* multiple of 4 */
 
+	if (!fthlv)
+		fthlv = 1;
+
 	return fthlv;
 }
 
@@ -1393,7 +1403,7 @@ static void stm32h7_spi_set_bpw(struct stm32_spi *spi)
 	cfg1_setb |= (bpw << STM32H7_SPI_CFG1_DSIZE_SHIFT) &
 		     STM32H7_SPI_CFG1_DSIZE;
 
-	spi->cur_fthlv = stm32h7_spi_prepare_fthlv(spi);
+	spi->cur_fthlv = stm32h7_spi_prepare_fthlv(spi, spi->cur_xferlen);
 	fthlv = spi->cur_fthlv - 1;
 
 	cfg1_clrb |= STM32H7_SPI_CFG1_FTHLV;
@@ -1588,6 +1598,8 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
 
 	spin_lock_irqsave(&spi->lock, flags);
 
+	spi->cur_xferlen = transfer->len;
+
 	if (spi->cur_bpw != transfer->bits_per_word) {
 		spi->cur_bpw = transfer->bits_per_word;
 		spi->cfg->set_bpw(spi);
@@ -1635,8 +1647,6 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
 			goto out;
 	}
 
-	spi->cur_xferlen = transfer->len;
-
 	dev_dbg(spi->dev, "transfer communication mode set to %d\n",
 		spi->cur_comm);
 	dev_dbg(spi->dev,
-- 
2.25.1

[PATCH AUTOSEL 5.8 14/63] spi: stm32: fix fifo threshold level in case of short transfer

[Sasha Levin]

From: Amelie Delaunay <amelie.delaunay@st.com>

[ Upstream commit 3373e9004acc0603242622b4378c64bc01d21b5f ]

When transfer is shorter than half of the fifo, set the data packet size
up to transfer size instead of up to half of the fifo.
Check also that threshold is set at least to 1 data frame.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/1597043558-29668-3-git-send-email-alain.volmat@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-stm32.c | 26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 814a3ec3b8ada..e5450233f3f8b 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -467,20 +467,27 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz,
 /**
  * stm32h7_spi_prepare_fthlv - Determine FIFO threshold level
  * @spi: pointer to the spi controller data structure
+ * @xfer_len: length of the message to be transferred
  */
-static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi)
+static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi, u32 xfer_len)
 {
-	u32 fthlv, half_fifo;
+	u32 fthlv, half_fifo, packet;
 
 	/* data packet should not exceed 1/2 of fifo space */
 	half_fifo = (spi->fifo_size / 2);
 
+	/* data_packet should not exceed transfer length */
+	if (half_fifo > xfer_len)
+		packet = xfer_len;
+	else
+		packet = half_fifo;
+
 	if (spi->cur_bpw <= 8)
-		fthlv = half_fifo;
+		fthlv = packet;
 	else if (spi->cur_bpw <= 16)
-		fthlv = half_fifo / 2;
+		fthlv = packet / 2;
 	else
-		fthlv = half_fifo / 4;
+		fthlv = packet / 4;
 
 	/* align packet size with data registers access */
 	if (spi->cur_bpw > 8)
@@ -488,6 +495,9 @@ static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi)
 	else
 		fthlv -= (fthlv % 4); /* multiple of 4 */
 
+	if (!fthlv)
+		fthlv = 1;
+
 	return fthlv;
 }
 
@@ -1393,7 +1403,7 @@ static void stm32h7_spi_set_bpw(struct stm32_spi *spi)
 	cfg1_setb |= (bpw << STM32H7_SPI_CFG1_DSIZE_SHIFT) &
 		     STM32H7_SPI_CFG1_DSIZE;
 
-	spi->cur_fthlv = stm32h7_spi_prepare_fthlv(spi);
+	spi->cur_fthlv = stm32h7_spi_prepare_fthlv(spi, spi->cur_xferlen);
 	fthlv = spi->cur_fthlv - 1;
 
 	cfg1_clrb |= STM32H7_SPI_CFG1_FTHLV;
@@ -1588,6 +1598,8 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
 
 	spin_lock_irqsave(&spi->lock, flags);
 
+	spi->cur_xferlen = transfer->len;
+
 	if (spi->cur_bpw != transfer->bits_per_word) {
 		spi->cur_bpw = transfer->bits_per_word;
 		spi->cfg->set_bpw(spi);
@@ -1635,8 +1647,6 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
 			goto out;
 	}
 
-	spi->cur_xferlen = transfer->len;
-
 	dev_dbg(spi->dev, "transfer communication mode set to %d\n",
 		spi->cur_comm);
 	dev_dbg(spi->dev,
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.8 15/63] spi: stm32: fix stm32_spi_prepare_mbr in case of odd clk_rate

[Sasha Levin]

From: Amelie Delaunay <amelie.delaunay@st.com>

[ Upstream commit 9cc61973bf9385b19ff5dda4a2a7e265fcba85e4 ]

Fix spi->clk_rate when it is odd to the nearest lowest even value because
minimum SPI divider is 2.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/1597043558-29668-4-git-send-email-alain.volmat@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-stm32.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index e5450233f3f8b..571dea72bf7e6 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -441,7 +441,8 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz,
 {
 	u32 div, mbrdiv;
 
-	div = DIV_ROUND_UP(spi->clk_rate, speed_hz);
+	/* Ensure spi->clk_rate is even */
+	div = DIV_ROUND_UP(spi->clk_rate & ~0x1, speed_hz);
 
 	/*
 	 * SPI framework set xfer->speed_hz to master->max_speed_hz if
-- 
2.25.1

[PATCH AUTOSEL 5.8 15/63] spi: stm32: fix stm32_spi_prepare_mbr in case of odd clk_rate

[Sasha Levin]

From: Amelie Delaunay <amelie.delaunay@st.com>

[ Upstream commit 9cc61973bf9385b19ff5dda4a2a7e265fcba85e4 ]

Fix spi->clk_rate when it is odd to the nearest lowest even value because
minimum SPI divider is 2.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/1597043558-29668-4-git-send-email-alain.volmat@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-stm32.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index e5450233f3f8b..571dea72bf7e6 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -441,7 +441,8 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz,
 {
 	u32 div, mbrdiv;
 
-	div = DIV_ROUND_UP(spi->clk_rate, speed_hz);
+	/* Ensure spi->clk_rate is even */
+	div = DIV_ROUND_UP(spi->clk_rate & ~0x1, speed_hz);
 
 	/*
 	 * SPI framework set xfer->speed_hz to master->max_speed_hz if
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.8 16/63] spi: stm32: always perform registers configuration prior to transfer

[Sasha Levin]

From: Alain Volmat <alain.volmat@st.com>

[ Upstream commit 60ccb3515fc61a0124c70aa37317f75b67560024 ]

SPI registers content may have been lost upon suspend/resume sequence.
So, always compute and apply the necessary configuration in
stm32_spi_transfer_one_setup routine.

Signed-off-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/1597043558-29668-6-git-send-email-alain.volmat@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-stm32.c | 42 +++++++++++++++++------------------------
 1 file changed, 17 insertions(+), 25 deletions(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 571dea72bf7e6..37dac7f0b8609 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -1596,41 +1596,33 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
 	unsigned long flags;
 	unsigned int comm_type;
 	int nb_words, ret = 0;
+	int mbr;
 
 	spin_lock_irqsave(&spi->lock, flags);
 
 	spi->cur_xferlen = transfer->len;
 
-	if (spi->cur_bpw != transfer->bits_per_word) {
-		spi->cur_bpw = transfer->bits_per_word;
-		spi->cfg->set_bpw(spi);
-	}
-
-	if (spi->cur_speed != transfer->speed_hz) {
-		int mbr;
-
-		/* Update spi->cur_speed with real clock speed */
-		mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz,
-					    spi->cfg->baud_rate_div_min,
-					    spi->cfg->baud_rate_div_max);
-		if (mbr < 0) {
-			ret = mbr;
-			goto out;
-		}
+	spi->cur_bpw = transfer->bits_per_word;
+	spi->cfg->set_bpw(spi);
 
-		transfer->speed_hz = spi->cur_speed;
-		stm32_spi_set_mbr(spi, mbr);
+	/* Update spi->cur_speed with real clock speed */
+	mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz,
+				    spi->cfg->baud_rate_div_min,
+				    spi->cfg->baud_rate_div_max);
+	if (mbr < 0) {
+		ret = mbr;
+		goto out;
 	}
 
-	comm_type = stm32_spi_communication_type(spi_dev, transfer);
-	if (spi->cur_comm != comm_type) {
-		ret = spi->cfg->set_mode(spi, comm_type);
+	transfer->speed_hz = spi->cur_speed;
+	stm32_spi_set_mbr(spi, mbr);
 
-		if (ret < 0)
-			goto out;
+	comm_type = stm32_spi_communication_type(spi_dev, transfer);
+	ret = spi->cfg->set_mode(spi, comm_type);
+	if (ret < 0)
+		goto out;
 
-		spi->cur_comm = comm_type;
-	}
+	spi->cur_comm = comm_type;
 
 	if (spi->cfg->set_data_idleness)
 		spi->cfg->set_data_idleness(spi, transfer->len);
-- 
2.25.1

[PATCH AUTOSEL 5.8 16/63] spi: stm32: always perform registers configuration prior to transfer

[Sasha Levin]

From: Alain Volmat <alain.volmat@st.com>

[ Upstream commit 60ccb3515fc61a0124c70aa37317f75b67560024 ]

SPI registers content may have been lost upon suspend/resume sequence.
So, always compute and apply the necessary configuration in
stm32_spi_transfer_one_setup routine.

Signed-off-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/1597043558-29668-6-git-send-email-alain.volmat@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-stm32.c | 42 +++++++++++++++++------------------------
 1 file changed, 17 insertions(+), 25 deletions(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 571dea72bf7e6..37dac7f0b8609 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -1596,41 +1596,33 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
 	unsigned long flags;
 	unsigned int comm_type;
 	int nb_words, ret = 0;
+	int mbr;
 
 	spin_lock_irqsave(&spi->lock, flags);
 
 	spi->cur_xferlen = transfer->len;
 
-	if (spi->cur_bpw != transfer->bits_per_word) {
-		spi->cur_bpw = transfer->bits_per_word;
-		spi->cfg->set_bpw(spi);
-	}
-
-	if (spi->cur_speed != transfer->speed_hz) {
-		int mbr;
-
-		/* Update spi->cur_speed with real clock speed */
-		mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz,
-					    spi->cfg->baud_rate_div_min,
-					    spi->cfg->baud_rate_div_max);
-		if (mbr < 0) {
-			ret = mbr;
-			goto out;
-		}
+	spi->cur_bpw = transfer->bits_per_word;
+	spi->cfg->set_bpw(spi);
 
-		transfer->speed_hz = spi->cur_speed;
-		stm32_spi_set_mbr(spi, mbr);
+	/* Update spi->cur_speed with real clock speed */
+	mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz,
+				    spi->cfg->baud_rate_div_min,
+				    spi->cfg->baud_rate_div_max);
+	if (mbr < 0) {
+		ret = mbr;
+		goto out;
 	}
 
-	comm_type = stm32_spi_communication_type(spi_dev, transfer);
-	if (spi->cur_comm != comm_type) {
-		ret = spi->cfg->set_mode(spi, comm_type);
+	transfer->speed_hz = spi->cur_speed;
+	stm32_spi_set_mbr(spi, mbr);
 
-		if (ret < 0)
-			goto out;
+	comm_type = stm32_spi_communication_type(spi_dev, transfer);
+	ret = spi->cfg->set_mode(spi, comm_type);
+	if (ret < 0)
+		goto out;
 
-		spi->cur_comm = comm_type;
-	}
+	spi->cur_comm = comm_type;
 
 	if (spi->cfg->set_data_idleness)
 		spi->cfg->set_data_idleness(spi, transfer->len);
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.8 17/63] drm/amd/powerplay: correct Vega20 cached smu feature state

[Sasha Levin]

From: Evan Quan <evan.quan@amd.com>

[ Upstream commit 266d81d9eed30f4994d76a2b237c63ece062eefe ]

Correct the cached smu feature state on pp_features sysfs
setting.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/powerplay/hwmgr/vega20_hwmgr.c    | 38 +++++++++----------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
index 9ff470f1b826c..b7f3f8b62c2ac 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
@@ -979,10 +979,7 @@ static int vega20_disable_all_smu_features(struct pp_hwmgr *hwmgr)
 {
 	struct vega20_hwmgr *data =
 			(struct vega20_hwmgr *)(hwmgr->backend);
-	uint64_t features_enabled;
-	int i;
-	bool enabled;
-	int ret = 0;
+	int i, ret = 0;
 
 	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc(hwmgr,
 			PPSMC_MSG_DisableAllSmuFeatures,
@@ -990,17 +987,8 @@ static int vega20_disable_all_smu_features(struct pp_hwmgr *hwmgr)
 			"[DisableAllSMUFeatures] Failed to disable all smu features!",
 			return ret);
 
-	ret = vega20_get_enabled_smc_features(hwmgr, &features_enabled);
-	PP_ASSERT_WITH_CODE(!ret,
-			"[DisableAllSMUFeatures] Failed to get enabled smc features!",
-			return ret);
-
-	for (i = 0; i < GNLD_FEATURES_MAX; i++) {
-		enabled = (features_enabled & data->smu_features[i].smu_feature_bitmap) ?
-			true : false;
-		data->smu_features[i].enabled = enabled;
-		data->smu_features[i].supported = enabled;
-	}
+	for (i = 0; i < GNLD_FEATURES_MAX; i++)
+		data->smu_features[i].enabled = 0;
 
 	return 0;
 }
@@ -3230,10 +3218,11 @@ static int vega20_get_ppfeature_status(struct pp_hwmgr *hwmgr, char *buf)
 
 static int vega20_set_ppfeature_status(struct pp_hwmgr *hwmgr, uint64_t new_ppfeature_masks)
 {
-	uint64_t features_enabled;
-	uint64_t features_to_enable;
-	uint64_t features_to_disable;
-	int ret = 0;
+	struct vega20_hwmgr *data =
+			(struct vega20_hwmgr *)(hwmgr->backend);
+	uint64_t features_enabled, features_to_enable, features_to_disable;
+	int i, ret = 0;
+	bool enabled;
 
 	if (new_ppfeature_masks >= (1ULL << GNLD_FEATURES_MAX))
 		return -EINVAL;
@@ -3262,6 +3251,17 @@ static int vega20_set_ppfeature_status(struct pp_hwmgr *hwmgr, uint64_t new_ppfe
 			return ret;
 	}
 
+	/* Update the cached feature enablement state */
+	ret = vega20_get_enabled_smc_features(hwmgr, &features_enabled);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < GNLD_FEATURES_MAX; i++) {
+		enabled = (features_enabled & data->smu_features[i].smu_feature_bitmap) ?
+			true : false;
+		data->smu_features[i].enabled = enabled;
+	}
+
 	return 0;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 5.8 17/63] drm/amd/powerplay: correct Vega20 cached smu feature state

[Sasha Levin]

From: Evan Quan <evan.quan@amd.com>

[ Upstream commit 266d81d9eed30f4994d76a2b237c63ece062eefe ]

Correct the cached smu feature state on pp_features sysfs
setting.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/powerplay/hwmgr/vega20_hwmgr.c    | 38 +++++++++----------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
index 9ff470f1b826c..b7f3f8b62c2ac 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
@@ -979,10 +979,7 @@ static int vega20_disable_all_smu_features(struct pp_hwmgr *hwmgr)
 {
 	struct vega20_hwmgr *data =
 			(struct vega20_hwmgr *)(hwmgr->backend);
-	uint64_t features_enabled;
-	int i;
-	bool enabled;
-	int ret = 0;
+	int i, ret = 0;
 
 	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc(hwmgr,
 			PPSMC_MSG_DisableAllSmuFeatures,
@@ -990,17 +987,8 @@ static int vega20_disable_all_smu_features(struct pp_hwmgr *hwmgr)
 			"[DisableAllSMUFeatures] Failed to disable all smu features!",
 			return ret);
 
-	ret = vega20_get_enabled_smc_features(hwmgr, &features_enabled);
-	PP_ASSERT_WITH_CODE(!ret,
-			"[DisableAllSMUFeatures] Failed to get enabled smc features!",
-			return ret);
-
-	for (i = 0; i < GNLD_FEATURES_MAX; i++) {
-		enabled = (features_enabled & data->smu_features[i].smu_feature_bitmap) ?
-			true : false;
-		data->smu_features[i].enabled = enabled;
-		data->smu_features[i].supported = enabled;
-	}
+	for (i = 0; i < GNLD_FEATURES_MAX; i++)
+		data->smu_features[i].enabled = 0;
 
 	return 0;
 }
@@ -3230,10 +3218,11 @@ static int vega20_get_ppfeature_status(struct pp_hwmgr *hwmgr, char *buf)
 
 static int vega20_set_ppfeature_status(struct pp_hwmgr *hwmgr, uint64_t new_ppfeature_masks)
 {
-	uint64_t features_enabled;
-	uint64_t features_to_enable;
-	uint64_t features_to_disable;
-	int ret = 0;
+	struct vega20_hwmgr *data =
+			(struct vega20_hwmgr *)(hwmgr->backend);
+	uint64_t features_enabled, features_to_enable, features_to_disable;
+	int i, ret = 0;
+	bool enabled;
 
 	if (new_ppfeature_masks >= (1ULL << GNLD_FEATURES_MAX))
 		return -EINVAL;
@@ -3262,6 +3251,17 @@ static int vega20_set_ppfeature_status(struct pp_hwmgr *hwmgr, uint64_t new_ppfe
 			return ret;
 	}
 
+	/* Update the cached feature enablement state */
+	ret = vega20_get_enabled_smc_features(hwmgr, &features_enabled);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < GNLD_FEATURES_MAX; i++) {
+		enabled = (features_enabled & data->smu_features[i].smu_feature_bitmap) ?
+			true : false;
+		data->smu_features[i].enabled = enabled;
+	}
+
 	return 0;
 }
 
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.8 17/63] drm/amd/powerplay: correct Vega20 cached smu feature state

[Sasha Levin]

From: Evan Quan <evan.quan@amd.com>

[ Upstream commit 266d81d9eed30f4994d76a2b237c63ece062eefe ]

Correct the cached smu feature state on pp_features sysfs
setting.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/powerplay/hwmgr/vega20_hwmgr.c    | 38 +++++++++----------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
index 9ff470f1b826c..b7f3f8b62c2ac 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
@@ -979,10 +979,7 @@ static int vega20_disable_all_smu_features(struct pp_hwmgr *hwmgr)
 {
 	struct vega20_hwmgr *data =
 			(struct vega20_hwmgr *)(hwmgr->backend);
-	uint64_t features_enabled;
-	int i;
-	bool enabled;
-	int ret = 0;
+	int i, ret = 0;
 
 	PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc(hwmgr,
 			PPSMC_MSG_DisableAllSmuFeatures,
@@ -990,17 +987,8 @@ static int vega20_disable_all_smu_features(struct pp_hwmgr *hwmgr)
 			"[DisableAllSMUFeatures] Failed to disable all smu features!",
 			return ret);
 
-	ret = vega20_get_enabled_smc_features(hwmgr, &features_enabled);
-	PP_ASSERT_WITH_CODE(!ret,
-			"[DisableAllSMUFeatures] Failed to get enabled smc features!",
-			return ret);
-
-	for (i = 0; i < GNLD_FEATURES_MAX; i++) {
-		enabled = (features_enabled & data->smu_features[i].smu_feature_bitmap) ?
-			true : false;
-		data->smu_features[i].enabled = enabled;
-		data->smu_features[i].supported = enabled;
-	}
+	for (i = 0; i < GNLD_FEATURES_MAX; i++)
+		data->smu_features[i].enabled = 0;
 
 	return 0;
 }
@@ -3230,10 +3218,11 @@ static int vega20_get_ppfeature_status(struct pp_hwmgr *hwmgr, char *buf)
 
 static int vega20_set_ppfeature_status(struct pp_hwmgr *hwmgr, uint64_t new_ppfeature_masks)
 {
-	uint64_t features_enabled;
-	uint64_t features_to_enable;
-	uint64_t features_to_disable;
-	int ret = 0;
+	struct vega20_hwmgr *data =
+			(struct vega20_hwmgr *)(hwmgr->backend);
+	uint64_t features_enabled, features_to_enable, features_to_disable;
+	int i, ret = 0;
+	bool enabled;
 
 	if (new_ppfeature_masks >= (1ULL << GNLD_FEATURES_MAX))
 		return -EINVAL;
@@ -3262,6 +3251,17 @@ static int vega20_set_ppfeature_status(struct pp_hwmgr *hwmgr, uint64_t new_ppfe
 			return ret;
 	}
 
+	/* Update the cached feature enablement state */
+	ret = vega20_get_enabled_smc_features(hwmgr, &features_enabled);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < GNLD_FEATURES_MAX; i++) {
+		enabled = (features_enabled & data->smu_features[i].smu_feature_bitmap) ?
+			true : false;
+		data->smu_features[i].enabled = enabled;
+	}
+
 	return 0;
 }
 
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.8 18/63] drm/amd/powerplay: correct UVD/VCE PG state on custom pptable uploading

[Sasha Levin]

From: Evan Quan <evan.quan@amd.com>

[ Upstream commit 2c5b8080d810d98e3e59617680218499b17c84a1 ]

The UVD/VCE PG state is managed by UVD and VCE IP. It's error-prone to
assume the bootup state in SMU based on the dpm status.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
index b7f3f8b62c2ac..9bd2874a122b4 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
@@ -1640,12 +1640,6 @@ static void vega20_init_powergate_state(struct pp_hwmgr *hwmgr)
 
 	data->uvd_power_gated = true;
 	data->vce_power_gated = true;
-
-	if (data->smu_features[GNLD_DPM_UVD].enabled)
-		data->uvd_power_gated = false;
-
-	if (data->smu_features[GNLD_DPM_VCE].enabled)
-		data->vce_power_gated = false;
 }
 
 static int vega20_enable_dpm_tasks(struct pp_hwmgr *hwmgr)
-- 
2.25.1

[PATCH AUTOSEL 5.8 18/63] drm/amd/powerplay: correct UVD/VCE PG state on custom pptable uploading

[Sasha Levin]

From: Evan Quan <evan.quan@amd.com>

[ Upstream commit 2c5b8080d810d98e3e59617680218499b17c84a1 ]

The UVD/VCE PG state is managed by UVD and VCE IP. It's error-prone to
assume the bootup state in SMU based on the dpm status.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
index b7f3f8b62c2ac..9bd2874a122b4 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
@@ -1640,12 +1640,6 @@ static void vega20_init_powergate_state(struct pp_hwmgr *hwmgr)
 
 	data->uvd_power_gated = true;
 	data->vce_power_gated = true;
-
-	if (data->smu_features[GNLD_DPM_UVD].enabled)
-		data->uvd_power_gated = false;
-
-	if (data->smu_features[GNLD_DPM_VCE].enabled)
-		data->vce_power_gated = false;
 }
 
 static int vega20_enable_dpm_tasks(struct pp_hwmgr *hwmgr)
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.8 18/63] drm/amd/powerplay: correct UVD/VCE PG state on custom pptable uploading

[Sasha Levin]

From: Evan Quan <evan.quan@amd.com>

[ Upstream commit 2c5b8080d810d98e3e59617680218499b17c84a1 ]

The UVD/VCE PG state is managed by UVD and VCE IP. It's error-prone to
assume the bootup state in SMU based on the dpm status.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
index b7f3f8b62c2ac..9bd2874a122b4 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
@@ -1640,12 +1640,6 @@ static void vega20_init_powergate_state(struct pp_hwmgr *hwmgr)
 
 	data->uvd_power_gated = true;
 	data->vce_power_gated = true;
-
-	if (data->smu_features[GNLD_DPM_UVD].enabled)
-		data->uvd_power_gated = false;
-
-	if (data->smu_features[GNLD_DPM_VCE].enabled)
-		data->vce_power_gated = false;
 }
 
 static int vega20_enable_dpm_tasks(struct pp_hwmgr *hwmgr)
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.8 19/63] drm/amd/display: Fix LFC multiplier changing erratically

[Sasha Levin]

From: Anthony Koo <Anthony.Koo@amd.com>

[ Upstream commit e4ed4dbbc8383d42a197da8fe7ca6434b0f14def ]

[Why]
1. There is a calculation that is using frame_time_in_us instead of
last_render_time_in_us to calculate whether choosing an LFC multiplier
would cause the inserted frame duration to be outside of range.

2. We do not handle unsigned integer subtraction correctly and it underflows
to a really large value, which causes some logic errors.

[How]
1. Fix logic to calculate 'within range' using last_render_time_in_us
2. Split out delta_from_mid_point_delta_in_us calculation to ensure
we don't underflow and wrap around

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../amd/display/modules/freesync/freesync.c   | 36 +++++++++++++++----
 1 file changed, 29 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/modules/freesync/freesync.c b/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
index eb7421e83b865..23a7fa8447e24 100644
--- a/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
+++ b/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
@@ -324,22 +324,44 @@ static void apply_below_the_range(struct core_freesync *core_freesync,
 
 		/* Choose number of frames to insert based on how close it
 		 * can get to the mid point of the variable range.
+		 *  - Delta for CEIL: delta_from_mid_point_in_us_1
+		 *  - Delta for FLOOR: delta_from_mid_point_in_us_2
 		 */
-		if ((frame_time_in_us / mid_point_frames_ceil) > in_out_vrr->min_duration_in_us &&
-				(delta_from_mid_point_in_us_1 < delta_from_mid_point_in_us_2 ||
-						mid_point_frames_floor < 2)) {
+		if ((last_render_time_in_us / mid_point_frames_ceil) < in_out_vrr->min_duration_in_us) {
+			/* Check for out of range.
+			 * If using CEIL produces a value that is out of range,
+			 * then we are forced to use FLOOR.
+			 */
+			frames_to_insert = mid_point_frames_floor;
+		} else if (mid_point_frames_floor < 2) {
+			/* Check if FLOOR would result in non-LFC. In this case
+			 * choose to use CEIL
+			 */
+			frames_to_insert = mid_point_frames_ceil;
+		} else if (delta_from_mid_point_in_us_1 < delta_from_mid_point_in_us_2) {
+			/* If choosing CEIL results in a frame duration that is
+			 * closer to the mid point of the range.
+			 * Choose CEIL
+			 */
 			frames_to_insert = mid_point_frames_ceil;
-			delta_from_mid_point_delta_in_us = delta_from_mid_point_in_us_2 -
-					delta_from_mid_point_in_us_1;
 		} else {
+			/* If choosing FLOOR results in a frame duration that is
+			 * closer to the mid point of the range.
+			 * Choose FLOOR
+			 */
 			frames_to_insert = mid_point_frames_floor;
-			delta_from_mid_point_delta_in_us = delta_from_mid_point_in_us_1 -
-					delta_from_mid_point_in_us_2;
 		}
 
 		/* Prefer current frame multiplier when BTR is enabled unless it drifts
 		 * too far from the midpoint
 		 */
+		if (delta_from_mid_point_in_us_1 < delta_from_mid_point_in_us_2) {
+			delta_from_mid_point_delta_in_us = delta_from_mid_point_in_us_2 -
+					delta_from_mid_point_in_us_1;
+		} else {
+			delta_from_mid_point_delta_in_us = delta_from_mid_point_in_us_1 -
+					delta_from_mid_point_in_us_2;
+		}
 		if (in_out_vrr->btr.frames_to_insert != 0 &&
 				delta_from_mid_point_delta_in_us < BTR_DRIFT_MARGIN) {
 			if (((last_render_time_in_us / in_out_vrr->btr.frames_to_insert) <
-- 
2.25.1

[PATCH AUTOSEL 5.8 19/63] drm/amd/display: Fix LFC multiplier changing erratically

[Sasha Levin]

From: Anthony Koo <Anthony.Koo@amd.com>

[ Upstream commit e4ed4dbbc8383d42a197da8fe7ca6434b0f14def ]

[Why]
1. There is a calculation that is using frame_time_in_us instead of
last_render_time_in_us to calculate whether choosing an LFC multiplier
would cause the inserted frame duration to be outside of range.

2. We do not handle unsigned integer subtraction correctly and it underflows
to a really large value, which causes some logic errors.

[How]
1. Fix logic to calculate 'within range' using last_render_time_in_us
2. Split out delta_from_mid_point_delta_in_us calculation to ensure
we don't underflow and wrap around

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../amd/display/modules/freesync/freesync.c   | 36 +++++++++++++++----
 1 file changed, 29 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/modules/freesync/freesync.c b/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
index eb7421e83b865..23a7fa8447e24 100644
--- a/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
+++ b/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
@@ -324,22 +324,44 @@ static void apply_below_the_range(struct core_freesync *core_freesync,
 
 		/* Choose number of frames to insert based on how close it
 		 * can get to the mid point of the variable range.
+		 *  - Delta for CEIL: delta_from_mid_point_in_us_1
+		 *  - Delta for FLOOR: delta_from_mid_point_in_us_2
 		 */
-		if ((frame_time_in_us / mid_point_frames_ceil) > in_out_vrr->min_duration_in_us &&
-				(delta_from_mid_point_in_us_1 < delta_from_mid_point_in_us_2 ||
-						mid_point_frames_floor < 2)) {
+		if ((last_render_time_in_us / mid_point_frames_ceil) < in_out_vrr->min_duration_in_us) {
+			/* Check for out of range.
+			 * If using CEIL produces a value that is out of range,
+			 * then we are forced to use FLOOR.
+			 */
+			frames_to_insert = mid_point_frames_floor;
+		} else if (mid_point_frames_floor < 2) {
+			/* Check if FLOOR would result in non-LFC. In this case
+			 * choose to use CEIL
+			 */
+			frames_to_insert = mid_point_frames_ceil;
+		} else if (delta_from_mid_point_in_us_1 < delta_from_mid_point_in_us_2) {
+			/* If choosing CEIL results in a frame duration that is
+			 * closer to the mid point of the range.
+			 * Choose CEIL
+			 */
 			frames_to_insert = mid_point_frames_ceil;
-			delta_from_mid_point_delta_in_us = delta_from_mid_point_in_us_2 -
-					delta_from_mid_point_in_us_1;
 		} else {
+			/* If choosing FLOOR results in a frame duration that is
+			 * closer to the mid point of the range.
+			 * Choose FLOOR
+			 */
 			frames_to_insert = mid_point_frames_floor;
-			delta_from_mid_point_delta_in_us = delta_from_mid_point_in_us_1 -
-					delta_from_mid_point_in_us_2;
 		}
 
 		/* Prefer current frame multiplier when BTR is enabled unless it drifts
 		 * too far from the midpoint
 		 */
+		if (delta_from_mid_point_in_us_1 < delta_from_mid_point_in_us_2) {
+			delta_from_mid_point_delta_in_us = delta_from_mid_point_in_us_2 -
+					delta_from_mid_point_in_us_1;
+		} else {
+			delta_from_mid_point_delta_in_us = delta_from_mid_point_in_us_1 -
+					delta_from_mid_point_in_us_2;
+		}
 		if (in_out_vrr->btr.frames_to_insert != 0 &&
 				delta_from_mid_point_delta_in_us < BTR_DRIFT_MARGIN) {
 			if (((last_render_time_in_us / in_out_vrr->btr.frames_to_insert) <
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.8 19/63] drm/amd/display: Fix LFC multiplier changing erratically

[Sasha Levin]

From: Anthony Koo <Anthony.Koo@amd.com>

[ Upstream commit e4ed4dbbc8383d42a197da8fe7ca6434b0f14def ]

[Why]
1. There is a calculation that is using frame_time_in_us instead of
last_render_time_in_us to calculate whether choosing an LFC multiplier
would cause the inserted frame duration to be outside of range.

2. We do not handle unsigned integer subtraction correctly and it underflows
to a really large value, which causes some logic errors.

[How]
1. Fix logic to calculate 'within range' using last_render_time_in_us
2. Split out delta_from_mid_point_delta_in_us calculation to ensure
we don't underflow and wrap around

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../amd/display/modules/freesync/freesync.c   | 36 +++++++++++++++----
 1 file changed, 29 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/modules/freesync/freesync.c b/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
index eb7421e83b865..23a7fa8447e24 100644
--- a/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
+++ b/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
@@ -324,22 +324,44 @@ static void apply_below_the_range(struct core_freesync *core_freesync,
 
 		/* Choose number of frames to insert based on how close it
 		 * can get to the mid point of the variable range.
+		 *  - Delta for CEIL: delta_from_mid_point_in_us_1
+		 *  - Delta for FLOOR: delta_from_mid_point_in_us_2
 		 */
-		if ((frame_time_in_us / mid_point_frames_ceil) > in_out_vrr->min_duration_in_us &&
-				(delta_from_mid_point_in_us_1 < delta_from_mid_point_in_us_2 ||
-						mid_point_frames_floor < 2)) {
+		if ((last_render_time_in_us / mid_point_frames_ceil) < in_out_vrr->min_duration_in_us) {
+			/* Check for out of range.
+			 * If using CEIL produces a value that is out of range,
+			 * then we are forced to use FLOOR.
+			 */
+			frames_to_insert = mid_point_frames_floor;
+		} else if (mid_point_frames_floor < 2) {
+			/* Check if FLOOR would result in non-LFC. In this case
+			 * choose to use CEIL
+			 */
+			frames_to_insert = mid_point_frames_ceil;
+		} else if (delta_from_mid_point_in_us_1 < delta_from_mid_point_in_us_2) {
+			/* If choosing CEIL results in a frame duration that is
+			 * closer to the mid point of the range.
+			 * Choose CEIL
+			 */
 			frames_to_insert = mid_point_frames_ceil;
-			delta_from_mid_point_delta_in_us = delta_from_mid_point_in_us_2 -
-					delta_from_mid_point_in_us_1;
 		} else {
+			/* If choosing FLOOR results in a frame duration that is
+			 * closer to the mid point of the range.
+			 * Choose FLOOR
+			 */
 			frames_to_insert = mid_point_frames_floor;
-			delta_from_mid_point_delta_in_us = delta_from_mid_point_in_us_1 -
-					delta_from_mid_point_in_us_2;
 		}
 
 		/* Prefer current frame multiplier when BTR is enabled unless it drifts
 		 * too far from the midpoint
 		 */
+		if (delta_from_mid_point_in_us_1 < delta_from_mid_point_in_us_2) {
+			delta_from_mid_point_delta_in_us = delta_from_mid_point_in_us_2 -
+					delta_from_mid_point_in_us_1;
+		} else {
+			delta_from_mid_point_delta_in_us = delta_from_mid_point_in_us_1 -
+					delta_from_mid_point_in_us_2;
+		}
 		if (in_out_vrr->btr.frames_to_insert != 0 &&
 				delta_from_mid_point_delta_in_us < BTR_DRIFT_MARGIN) {
 			if (((last_render_time_in_us / in_out_vrr->btr.frames_to_insert) <
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.8 20/63] drm/amd/display: Switch to immediate mode for updating infopackets

[Sasha Levin]

From: Anthony Koo <Anthony.Koo@amd.com>

[ Upstream commit abba907c7a20032c2d504fd5afe3af7d440a09d0 ]

[Why]
Using FRAME_UPDATE will result in infopacket to be potentially updated
one frame late.
In commit stream scenarios for previously active stream, some stale
infopacket data from previous config might be erroneously sent out on
initial frame after stream is re-enabled.

[How]
Switch to using IMMEDIATE_UPDATE mode

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../amd/display/dc/dcn10/dcn10_stream_encoder.c  | 16 ++++++++--------
 .../amd/display/dc/dcn10/dcn10_stream_encoder.h  | 14 ++++++++++++++
 2 files changed, 22 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c
index 07b2f9399671d..842abb4c475bc 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c
@@ -121,35 +121,35 @@ void enc1_update_generic_info_packet(
 	switch (packet_index) {
 	case 0:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC0_FRAME_UPDATE, 1);
+				AFMT_GENERIC0_IMMEDIATE_UPDATE, 1);
 		break;
 	case 1:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC1_FRAME_UPDATE, 1);
+				AFMT_GENERIC1_IMMEDIATE_UPDATE, 1);
 		break;
 	case 2:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC2_FRAME_UPDATE, 1);
+				AFMT_GENERIC2_IMMEDIATE_UPDATE, 1);
 		break;
 	case 3:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC3_FRAME_UPDATE, 1);
+				AFMT_GENERIC3_IMMEDIATE_UPDATE, 1);
 		break;
 	case 4:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC4_FRAME_UPDATE, 1);
+				AFMT_GENERIC4_IMMEDIATE_UPDATE, 1);
 		break;
 	case 5:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC5_FRAME_UPDATE, 1);
+				AFMT_GENERIC5_IMMEDIATE_UPDATE, 1);
 		break;
 	case 6:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC6_FRAME_UPDATE, 1);
+				AFMT_GENERIC6_IMMEDIATE_UPDATE, 1);
 		break;
 	case 7:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC7_FRAME_UPDATE, 1);
+				AFMT_GENERIC7_IMMEDIATE_UPDATE, 1);
 		break;
 	default:
 		break;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.h b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.h
index f9b9e221c698b..7507000a99ac4 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.h
@@ -273,7 +273,14 @@ struct dcn10_stream_enc_registers {
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC2_FRAME_UPDATE, mask_sh),\
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC3_FRAME_UPDATE, mask_sh),\
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC4_FRAME_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC0_IMMEDIATE_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC1_IMMEDIATE_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC2_IMMEDIATE_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC3_IMMEDIATE_UPDATE, mask_sh),\
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC4_IMMEDIATE_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC5_IMMEDIATE_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC6_IMMEDIATE_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC7_IMMEDIATE_UPDATE, mask_sh),\
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC5_FRAME_UPDATE, mask_sh),\
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC6_FRAME_UPDATE, mask_sh),\
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC7_FRAME_UPDATE, mask_sh),\
@@ -337,7 +344,14 @@ struct dcn10_stream_enc_registers {
 	type AFMT_GENERIC2_FRAME_UPDATE;\
 	type AFMT_GENERIC3_FRAME_UPDATE;\
 	type AFMT_GENERIC4_FRAME_UPDATE;\
+	type AFMT_GENERIC0_IMMEDIATE_UPDATE;\
+	type AFMT_GENERIC1_IMMEDIATE_UPDATE;\
+	type AFMT_GENERIC2_IMMEDIATE_UPDATE;\
+	type AFMT_GENERIC3_IMMEDIATE_UPDATE;\
 	type AFMT_GENERIC4_IMMEDIATE_UPDATE;\
+	type AFMT_GENERIC5_IMMEDIATE_UPDATE;\
+	type AFMT_GENERIC6_IMMEDIATE_UPDATE;\
+	type AFMT_GENERIC7_IMMEDIATE_UPDATE;\
 	type AFMT_GENERIC5_FRAME_UPDATE;\
 	type AFMT_GENERIC6_FRAME_UPDATE;\
 	type AFMT_GENERIC7_FRAME_UPDATE;\
-- 
2.25.1

[PATCH AUTOSEL 5.8 20/63] drm/amd/display: Switch to immediate mode for updating infopackets

[Sasha Levin]

From: Anthony Koo <Anthony.Koo@amd.com>

[ Upstream commit abba907c7a20032c2d504fd5afe3af7d440a09d0 ]

[Why]
Using FRAME_UPDATE will result in infopacket to be potentially updated
one frame late.
In commit stream scenarios for previously active stream, some stale
infopacket data from previous config might be erroneously sent out on
initial frame after stream is re-enabled.

[How]
Switch to using IMMEDIATE_UPDATE mode

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../amd/display/dc/dcn10/dcn10_stream_encoder.c  | 16 ++++++++--------
 .../amd/display/dc/dcn10/dcn10_stream_encoder.h  | 14 ++++++++++++++
 2 files changed, 22 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c
index 07b2f9399671d..842abb4c475bc 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c
@@ -121,35 +121,35 @@ void enc1_update_generic_info_packet(
 	switch (packet_index) {
 	case 0:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC0_FRAME_UPDATE, 1);
+				AFMT_GENERIC0_IMMEDIATE_UPDATE, 1);
 		break;
 	case 1:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC1_FRAME_UPDATE, 1);
+				AFMT_GENERIC1_IMMEDIATE_UPDATE, 1);
 		break;
 	case 2:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC2_FRAME_UPDATE, 1);
+				AFMT_GENERIC2_IMMEDIATE_UPDATE, 1);
 		break;
 	case 3:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC3_FRAME_UPDATE, 1);
+				AFMT_GENERIC3_IMMEDIATE_UPDATE, 1);
 		break;
 	case 4:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC4_FRAME_UPDATE, 1);
+				AFMT_GENERIC4_IMMEDIATE_UPDATE, 1);
 		break;
 	case 5:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC5_FRAME_UPDATE, 1);
+				AFMT_GENERIC5_IMMEDIATE_UPDATE, 1);
 		break;
 	case 6:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC6_FRAME_UPDATE, 1);
+				AFMT_GENERIC6_IMMEDIATE_UPDATE, 1);
 		break;
 	case 7:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC7_FRAME_UPDATE, 1);
+				AFMT_GENERIC7_IMMEDIATE_UPDATE, 1);
 		break;
 	default:
 		break;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.h b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.h
index f9b9e221c698b..7507000a99ac4 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.h
@@ -273,7 +273,14 @@ struct dcn10_stream_enc_registers {
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC2_FRAME_UPDATE, mask_sh),\
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC3_FRAME_UPDATE, mask_sh),\
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC4_FRAME_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC0_IMMEDIATE_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC1_IMMEDIATE_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC2_IMMEDIATE_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC3_IMMEDIATE_UPDATE, mask_sh),\
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC4_IMMEDIATE_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC5_IMMEDIATE_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC6_IMMEDIATE_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC7_IMMEDIATE_UPDATE, mask_sh),\
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC5_FRAME_UPDATE, mask_sh),\
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC6_FRAME_UPDATE, mask_sh),\
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC7_FRAME_UPDATE, mask_sh),\
@@ -337,7 +344,14 @@ struct dcn10_stream_enc_registers {
 	type AFMT_GENERIC2_FRAME_UPDATE;\
 	type AFMT_GENERIC3_FRAME_UPDATE;\
 	type AFMT_GENERIC4_FRAME_UPDATE;\
+	type AFMT_GENERIC0_IMMEDIATE_UPDATE;\
+	type AFMT_GENERIC1_IMMEDIATE_UPDATE;\
+	type AFMT_GENERIC2_IMMEDIATE_UPDATE;\
+	type AFMT_GENERIC3_IMMEDIATE_UPDATE;\
 	type AFMT_GENERIC4_IMMEDIATE_UPDATE;\
+	type AFMT_GENERIC5_IMMEDIATE_UPDATE;\
+	type AFMT_GENERIC6_IMMEDIATE_UPDATE;\
+	type AFMT_GENERIC7_IMMEDIATE_UPDATE;\
 	type AFMT_GENERIC5_FRAME_UPDATE;\
 	type AFMT_GENERIC6_FRAME_UPDATE;\
 	type AFMT_GENERIC7_FRAME_UPDATE;\
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.8 20/63] drm/amd/display: Switch to immediate mode for updating infopackets

[Sasha Levin]

From: Anthony Koo <Anthony.Koo@amd.com>

[ Upstream commit abba907c7a20032c2d504fd5afe3af7d440a09d0 ]

[Why]
Using FRAME_UPDATE will result in infopacket to be potentially updated
one frame late.
In commit stream scenarios for previously active stream, some stale
infopacket data from previous config might be erroneously sent out on
initial frame after stream is re-enabled.

[How]
Switch to using IMMEDIATE_UPDATE mode

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../amd/display/dc/dcn10/dcn10_stream_encoder.c  | 16 ++++++++--------
 .../amd/display/dc/dcn10/dcn10_stream_encoder.h  | 14 ++++++++++++++
 2 files changed, 22 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c
index 07b2f9399671d..842abb4c475bc 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c
@@ -121,35 +121,35 @@ void enc1_update_generic_info_packet(
 	switch (packet_index) {
 	case 0:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC0_FRAME_UPDATE, 1);
+				AFMT_GENERIC0_IMMEDIATE_UPDATE, 1);
 		break;
 	case 1:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC1_FRAME_UPDATE, 1);
+				AFMT_GENERIC1_IMMEDIATE_UPDATE, 1);
 		break;
 	case 2:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC2_FRAME_UPDATE, 1);
+				AFMT_GENERIC2_IMMEDIATE_UPDATE, 1);
 		break;
 	case 3:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC3_FRAME_UPDATE, 1);
+				AFMT_GENERIC3_IMMEDIATE_UPDATE, 1);
 		break;
 	case 4:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC4_FRAME_UPDATE, 1);
+				AFMT_GENERIC4_IMMEDIATE_UPDATE, 1);
 		break;
 	case 5:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC5_FRAME_UPDATE, 1);
+				AFMT_GENERIC5_IMMEDIATE_UPDATE, 1);
 		break;
 	case 6:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC6_FRAME_UPDATE, 1);
+				AFMT_GENERIC6_IMMEDIATE_UPDATE, 1);
 		break;
 	case 7:
 		REG_UPDATE(AFMT_VBI_PACKET_CONTROL1,
-				AFMT_GENERIC7_FRAME_UPDATE, 1);
+				AFMT_GENERIC7_IMMEDIATE_UPDATE, 1);
 		break;
 	default:
 		break;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.h b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.h
index f9b9e221c698b..7507000a99ac4 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.h
@@ -273,7 +273,14 @@ struct dcn10_stream_enc_registers {
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC2_FRAME_UPDATE, mask_sh),\
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC3_FRAME_UPDATE, mask_sh),\
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC4_FRAME_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC0_IMMEDIATE_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC1_IMMEDIATE_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC2_IMMEDIATE_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC3_IMMEDIATE_UPDATE, mask_sh),\
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC4_IMMEDIATE_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC5_IMMEDIATE_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC6_IMMEDIATE_UPDATE, mask_sh),\
+	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC7_IMMEDIATE_UPDATE, mask_sh),\
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC5_FRAME_UPDATE, mask_sh),\
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC6_FRAME_UPDATE, mask_sh),\
 	SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC7_FRAME_UPDATE, mask_sh),\
@@ -337,7 +344,14 @@ struct dcn10_stream_enc_registers {
 	type AFMT_GENERIC2_FRAME_UPDATE;\
 	type AFMT_GENERIC3_FRAME_UPDATE;\
 	type AFMT_GENERIC4_FRAME_UPDATE;\
+	type AFMT_GENERIC0_IMMEDIATE_UPDATE;\
+	type AFMT_GENERIC1_IMMEDIATE_UPDATE;\
+	type AFMT_GENERIC2_IMMEDIATE_UPDATE;\
+	type AFMT_GENERIC3_IMMEDIATE_UPDATE;\
 	type AFMT_GENERIC4_IMMEDIATE_UPDATE;\
+	type AFMT_GENERIC5_IMMEDIATE_UPDATE;\
+	type AFMT_GENERIC6_IMMEDIATE_UPDATE;\
+	type AFMT_GENERIC7_IMMEDIATE_UPDATE;\
 	type AFMT_GENERIC5_FRAME_UPDATE;\
 	type AFMT_GENERIC6_FRAME_UPDATE;\
 	type AFMT_GENERIC7_FRAME_UPDATE;\
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.8 21/63] selftests/bpf: Fix segmentation fault in test_progs

[Sasha Levin]

From: Jianlin Lv <Jianlin.Lv@arm.com>

[ Upstream commit 0390c429dbed4068bd2cd8dded937d9a5ec24cd2 ]

test_progs reports the segmentation fault as below:

  $ sudo ./test_progs -t mmap --verbose
  test_mmap:PASS:skel_open_and_load 0 nsec
  [...]
  test_mmap:PASS:adv_mmap1 0 nsec
  test_mmap:PASS:adv_mmap2 0 nsec
  test_mmap:PASS:adv_mmap3 0 nsec
  test_mmap:PASS:adv_mmap4 0 nsec
  Segmentation fault

This issue was triggered because mmap() and munmap() used inconsistent
length parameters; mmap() creates a new mapping of 3 * page_size, but the
length parameter set in the subsequent re-map and munmap() functions is
4 * page_size; this leads to the destruction of the process space.

To fix this issue, first create 4 pages of anonymous mapping, then do all
the mmap() with MAP_FIXED.

Another issue is that when unmap the second page fails, the length
parameter to delete tmp1 mappings should be 4 * page_size.

Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200810153940.125508-1-Jianlin.Lv@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/prog_tests/mmap.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/tools/testing/selftests/bpf/prog_tests/mmap.c b/tools/testing/selftests/bpf/prog_tests/mmap.c
index 43d0b5578f461..9c3c5c0f068fb 100644
--- a/tools/testing/selftests/bpf/prog_tests/mmap.c
+++ b/tools/testing/selftests/bpf/prog_tests/mmap.c
@@ -21,7 +21,7 @@ void test_mmap(void)
 	const long page_size = sysconf(_SC_PAGE_SIZE);
 	int err, duration = 0, i, data_map_fd, data_map_id, tmp_fd, rdmap_fd;
 	struct bpf_map *data_map, *bss_map;
-	void *bss_mmaped = NULL, *map_mmaped = NULL, *tmp1, *tmp2;
+	void *bss_mmaped = NULL, *map_mmaped = NULL, *tmp0, *tmp1, *tmp2;
 	struct test_mmap__bss *bss_data;
 	struct bpf_map_info map_info;
 	__u32 map_info_sz = sizeof(map_info);
@@ -183,16 +183,23 @@ void test_mmap(void)
 
 	/* check some more advanced mmap() manipulations */
 
+	tmp0 = mmap(NULL, 4 * page_size, PROT_READ, MAP_SHARED | MAP_ANONYMOUS,
+			  -1, 0);
+	if (CHECK(tmp0 == MAP_FAILED, "adv_mmap0", "errno %d\n", errno))
+		goto cleanup;
+
 	/* map all but last page: pages 1-3 mapped */
-	tmp1 = mmap(NULL, 3 * page_size, PROT_READ, MAP_SHARED,
+	tmp1 = mmap(tmp0, 3 * page_size, PROT_READ, MAP_SHARED | MAP_FIXED,
 			  data_map_fd, 0);
-	if (CHECK(tmp1 == MAP_FAILED, "adv_mmap1", "errno %d\n", errno))
+	if (CHECK(tmp0 != tmp1, "adv_mmap1", "tmp0: %p, tmp1: %p\n", tmp0, tmp1)) {
+		munmap(tmp0, 4 * page_size);
 		goto cleanup;
+	}
 
 	/* unmap second page: pages 1, 3 mapped */
 	err = munmap(tmp1 + page_size, page_size);
 	if (CHECK(err, "adv_mmap2", "errno %d\n", errno)) {
-		munmap(tmp1, map_sz);
+		munmap(tmp1, 4 * page_size);
 		goto cleanup;
 	}
 
@@ -201,7 +208,7 @@ void test_mmap(void)
 		    MAP_SHARED | MAP_FIXED, data_map_fd, 0);
 	if (CHECK(tmp2 == MAP_FAILED, "adv_mmap3", "errno %d\n", errno)) {
 		munmap(tmp1, page_size);
-		munmap(tmp1 + 2*page_size, page_size);
+		munmap(tmp1 + 2*page_size, 2 * page_size);
 		goto cleanup;
 	}
 	CHECK(tmp1 + page_size != tmp2, "adv_mmap4",
@@ -211,7 +218,7 @@ void test_mmap(void)
 	tmp2 = mmap(tmp1, 4 * page_size, PROT_READ, MAP_SHARED | MAP_FIXED,
 		    data_map_fd, 0);
 	if (CHECK(tmp2 == MAP_FAILED, "adv_mmap5", "errno %d\n", errno)) {
-		munmap(tmp1, 3 * page_size); /* unmap page 1 */
+		munmap(tmp1, 4 * page_size); /* unmap page 1 */
 		goto cleanup;
 	}
 	CHECK(tmp1 != tmp2, "adv_mmap6", "tmp1: %p, tmp2: %p\n", tmp1, tmp2);
-- 
2.25.1

[PATCH AUTOSEL 5.8 22/63] libbpf: Handle GCC built-in types for Arm NEON

[Sasha Levin]

From: Jean-Philippe Brucker <jean-philippe@linaro.org>

[ Upstream commit 702eddc77a905782083b14ccd05b23840675fd18 ]

When building Arm NEON (SIMD) code from lib/raid6/neon.uc, GCC emits
DWARF information using a base type "__Poly8_t", which is internal to
GCC and not recognized by Clang. This causes build failures when
building with Clang a vmlinux.h generated from an arm64 kernel that was
built with GCC.

	vmlinux.h:47284:9: error: unknown type name '__Poly8_t'
	typedef __Poly8_t poly8x16_t[16];
	        ^~~~~~~~~

The polyX_t types are defined as unsigned integers in the "Arm C
Language Extension" document (101028_Q220_00_en). Emit typedefs based on
standard integer types for the GCC internal types, similar to those
emitted by Clang.

Including linux/kernel.h to use ARRAY_SIZE() incidentally redefined
max(), causing a build bug due to different types, hence the seemingly
unrelated change.

Reported-by: Jakov Petrina <jakov.petrina@sartura.hr>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200812143909.3293280-1-jean-philippe@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/btf_dump.c | 35 ++++++++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/tools/lib/bpf/btf_dump.c b/tools/lib/bpf/btf_dump.c
index bbb4303172606..4edf76c5a7101 100644
--- a/tools/lib/bpf/btf_dump.c
+++ b/tools/lib/bpf/btf_dump.c
@@ -13,6 +13,7 @@
 #include <errno.h>
 #include <linux/err.h>
 #include <linux/btf.h>
+#include <linux/kernel.h>
 #include "btf.h"
 #include "hashmap.h"
 #include "libbpf.h"
@@ -548,6 +549,9 @@ static int btf_dump_order_type(struct btf_dump *d, __u32 id, bool through_ptr)
 	}
 }
 
+static void btf_dump_emit_missing_aliases(struct btf_dump *d, __u32 id,
+					  const struct btf_type *t);
+
 static void btf_dump_emit_struct_fwd(struct btf_dump *d, __u32 id,
 				     const struct btf_type *t);
 static void btf_dump_emit_struct_def(struct btf_dump *d, __u32 id,
@@ -670,6 +674,9 @@ static void btf_dump_emit_type(struct btf_dump *d, __u32 id, __u32 cont_id)
 
 	switch (kind) {
 	case BTF_KIND_INT:
+		/* Emit type alias definitions if necessary */
+		btf_dump_emit_missing_aliases(d, id, t);
+
 		tstate->emit_state = EMITTED;
 		break;
 	case BTF_KIND_ENUM:
@@ -869,7 +876,7 @@ static void btf_dump_emit_struct_def(struct btf_dump *d,
 			btf_dump_printf(d, ": %d", m_sz);
 			off = m_off + m_sz;
 		} else {
-			m_sz = max(0, btf__resolve_size(d->btf, m->type));
+			m_sz = max(0LL, btf__resolve_size(d->btf, m->type));
 			off = m_off + m_sz * 8;
 		}
 		btf_dump_printf(d, ";");
@@ -889,6 +896,32 @@ static void btf_dump_emit_struct_def(struct btf_dump *d,
 		btf_dump_printf(d, " __attribute__((packed))");
 }
 
+static const char *missing_base_types[][2] = {
+	/*
+	 * GCC emits typedefs to its internal __PolyX_t types when compiling Arm
+	 * SIMD intrinsics. Alias them to standard base types.
+	 */
+	{ "__Poly8_t",		"unsigned char" },
+	{ "__Poly16_t",		"unsigned short" },
+	{ "__Poly64_t",		"unsigned long long" },
+	{ "__Poly128_t",	"unsigned __int128" },
+};
+
+static void btf_dump_emit_missing_aliases(struct btf_dump *d, __u32 id,
+					  const struct btf_type *t)
+{
+	const char *name = btf_dump_type_name(d, id);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(missing_base_types); i++) {
+		if (strcmp(name, missing_base_types[i][0]) == 0) {
+			btf_dump_printf(d, "typedef %s %s;\n\n",
+					missing_base_types[i][1], name);
+			break;
+		}
+	}
+}
+
 static void btf_dump_emit_enum_fwd(struct btf_dump *d, __u32 id,
 				   const struct btf_type *t)
 {
-- 
2.25.1

[PATCH AUTOSEL 5.8 23/63] netfilter: avoid ipv6 -> nf_defrag_ipv6 module dependency

[Sasha Levin]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 2404b73c3f1a5f15726c6ecd226b56f6f992767f ]

nf_ct_frag6_gather is part of nf_defrag_ipv6.ko, not ipv6 core.

The current use of the netfilter ipv6 stub indirections  causes a module
dependency between ipv6 and nf_defrag_ipv6.

This prevents nf_defrag_ipv6 module from being removed because ipv6 can't
be unloaded.

Remove the indirection and always use a direct call.  This creates a
depency from nf_conntrack_bridge to nf_defrag_ipv6 instead:

modinfo nf_conntrack
depends:        nf_conntrack,nf_defrag_ipv6,bridge

.. and nf_conntrack already depends on nf_defrag_ipv6 anyway.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/netfilter_ipv6.h             | 18 ------------------
 net/bridge/netfilter/nf_conntrack_bridge.c |  8 ++++++--
 net/ipv6/netfilter.c                       |  3 ---
 3 files changed, 6 insertions(+), 23 deletions(-)

diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h
index aac42c28fe62d..9b67394471e1c 100644
--- a/include/linux/netfilter_ipv6.h
+++ b/include/linux/netfilter_ipv6.h
@@ -58,7 +58,6 @@ struct nf_ipv6_ops {
 			int (*output)(struct net *, struct sock *, struct sk_buff *));
 	int (*reroute)(struct sk_buff *skb, const struct nf_queue_entry *entry);
 #if IS_MODULE(CONFIG_IPV6)
-	int (*br_defrag)(struct net *net, struct sk_buff *skb, u32 user);
 	int (*br_fragment)(struct net *net, struct sock *sk,
 			   struct sk_buff *skb,
 			   struct nf_bridge_frag_data *data,
@@ -117,23 +116,6 @@ static inline int nf_ip6_route(struct net *net, struct dst_entry **dst,
 
 #include <net/netfilter/ipv6/nf_defrag_ipv6.h>
 
-static inline int nf_ipv6_br_defrag(struct net *net, struct sk_buff *skb,
-				    u32 user)
-{
-#if IS_MODULE(CONFIG_IPV6)
-	const struct nf_ipv6_ops *v6_ops = nf_get_ipv6_ops();
-
-	if (!v6_ops)
-		return 1;
-
-	return v6_ops->br_defrag(net, skb, user);
-#elif IS_BUILTIN(CONFIG_IPV6)
-	return nf_ct_frag6_gather(net, skb, user);
-#else
-	return 1;
-#endif
-}
-
 int br_ip6_fragment(struct net *net, struct sock *sk, struct sk_buff *skb,
 		    struct nf_bridge_frag_data *data,
 		    int (*output)(struct net *, struct sock *sk,
diff --git a/net/bridge/netfilter/nf_conntrack_bridge.c b/net/bridge/netfilter/nf_conntrack_bridge.c
index 8096732223828..8d033a75a766e 100644
--- a/net/bridge/netfilter/nf_conntrack_bridge.c
+++ b/net/bridge/netfilter/nf_conntrack_bridge.c
@@ -168,6 +168,7 @@ static unsigned int nf_ct_br_defrag4(struct sk_buff *skb,
 static unsigned int nf_ct_br_defrag6(struct sk_buff *skb,
 				     const struct nf_hook_state *state)
 {
+#if IS_ENABLED(CONFIG_NF_DEFRAG_IPV6)
 	u16 zone_id = NF_CT_DEFAULT_ZONE_ID;
 	enum ip_conntrack_info ctinfo;
 	struct br_input_skb_cb cb;
@@ -180,14 +181,17 @@ static unsigned int nf_ct_br_defrag6(struct sk_buff *skb,
 
 	br_skb_cb_save(skb, &cb, sizeof(struct inet6_skb_parm));
 
-	err = nf_ipv6_br_defrag(state->net, skb,
-				IP_DEFRAG_CONNTRACK_BRIDGE_IN + zone_id);
+	err = nf_ct_frag6_gather(state->net, skb,
+				 IP_DEFRAG_CONNTRACK_BRIDGE_IN + zone_id);
 	/* queued */
 	if (err == -EINPROGRESS)
 		return NF_STOLEN;
 
 	br_skb_cb_restore(skb, &cb, IP6CB(skb)->frag_max_size);
 	return err == 0 ? NF_ACCEPT : NF_DROP;
+#else
+	return NF_ACCEPT;
+#endif
 }
 
 static int nf_ct_br_ip_check(const struct sk_buff *skb)
diff --git a/net/ipv6/netfilter.c b/net/ipv6/netfilter.c
index 409e79b84a830..6d0e942d082d4 100644
--- a/net/ipv6/netfilter.c
+++ b/net/ipv6/netfilter.c
@@ -245,9 +245,6 @@ static const struct nf_ipv6_ops ipv6ops = {
 	.route_input		= ip6_route_input,
 	.fragment		= ip6_fragment,
 	.reroute		= nf_ip6_reroute,
-#if IS_MODULE(CONFIG_IPV6) && IS_ENABLED(CONFIG_NF_DEFRAG_IPV6)
-	.br_defrag		= nf_ct_frag6_gather,
-#endif
 #if IS_MODULE(CONFIG_IPV6)
 	.br_fragment		= br_ip6_fragment,
 #endif
-- 
2.25.1

[Bridge] [PATCH AUTOSEL 5.8 23/63] netfilter: avoid ipv6 -> nf_defrag_ipv6 module dependency

[Sasha Levin]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 2404b73c3f1a5f15726c6ecd226b56f6f992767f ]

nf_ct_frag6_gather is part of nf_defrag_ipv6.ko, not ipv6 core.

The current use of the netfilter ipv6 stub indirections  causes a module
dependency between ipv6 and nf_defrag_ipv6.

This prevents nf_defrag_ipv6 module from being removed because ipv6 can't
be unloaded.

Remove the indirection and always use a direct call.  This creates a
depency from nf_conntrack_bridge to nf_defrag_ipv6 instead:

modinfo nf_conntrack
depends:        nf_conntrack,nf_defrag_ipv6,bridge

.. and nf_conntrack already depends on nf_defrag_ipv6 anyway.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/netfilter_ipv6.h             | 18 ------------------
 net/bridge/netfilter/nf_conntrack_bridge.c |  8 ++++++--
 net/ipv6/netfilter.c                       |  3 ---
 3 files changed, 6 insertions(+), 23 deletions(-)

diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h
index aac42c28fe62d..9b67394471e1c 100644
--- a/include/linux/netfilter_ipv6.h
+++ b/include/linux/netfilter_ipv6.h
@@ -58,7 +58,6 @@ struct nf_ipv6_ops {
 			int (*output)(struct net *, struct sock *, struct sk_buff *));
 	int (*reroute)(struct sk_buff *skb, const struct nf_queue_entry *entry);
 #if IS_MODULE(CONFIG_IPV6)
-	int (*br_defrag)(struct net *net, struct sk_buff *skb, u32 user);
 	int (*br_fragment)(struct net *net, struct sock *sk,
 			   struct sk_buff *skb,
 			   struct nf_bridge_frag_data *data,
@@ -117,23 +116,6 @@ static inline int nf_ip6_route(struct net *net, struct dst_entry **dst,
 
 #include <net/netfilter/ipv6/nf_defrag_ipv6.h>
 
-static inline int nf_ipv6_br_defrag(struct net *net, struct sk_buff *skb,
-				    u32 user)
-{
-#if IS_MODULE(CONFIG_IPV6)
-	const struct nf_ipv6_ops *v6_ops = nf_get_ipv6_ops();
-
-	if (!v6_ops)
-		return 1;
-
-	return v6_ops->br_defrag(net, skb, user);
-#elif IS_BUILTIN(CONFIG_IPV6)
-	return nf_ct_frag6_gather(net, skb, user);
-#else
-	return 1;
-#endif
-}
-
 int br_ip6_fragment(struct net *net, struct sock *sk, struct sk_buff *skb,
 		    struct nf_bridge_frag_data *data,
 		    int (*output)(struct net *, struct sock *sk,
diff --git a/net/bridge/netfilter/nf_conntrack_bridge.c b/net/bridge/netfilter/nf_conntrack_bridge.c
index 8096732223828..8d033a75a766e 100644
--- a/net/bridge/netfilter/nf_conntrack_bridge.c
+++ b/net/bridge/netfilter/nf_conntrack_bridge.c
@@ -168,6 +168,7 @@ static unsigned int nf_ct_br_defrag4(struct sk_buff *skb,
 static unsigned int nf_ct_br_defrag6(struct sk_buff *skb,
 				     const struct nf_hook_state *state)
 {
+#if IS_ENABLED(CONFIG_NF_DEFRAG_IPV6)
 	u16 zone_id = NF_CT_DEFAULT_ZONE_ID;
 	enum ip_conntrack_info ctinfo;
 	struct br_input_skb_cb cb;
@@ -180,14 +181,17 @@ static unsigned int nf_ct_br_defrag6(struct sk_buff *skb,
 
 	br_skb_cb_save(skb, &cb, sizeof(struct inet6_skb_parm));
 
-	err = nf_ipv6_br_defrag(state->net, skb,
-				IP_DEFRAG_CONNTRACK_BRIDGE_IN + zone_id);
+	err = nf_ct_frag6_gather(state->net, skb,
+				 IP_DEFRAG_CONNTRACK_BRIDGE_IN + zone_id);
 	/* queued */
 	if (err == -EINPROGRESS)
 		return NF_STOLEN;
 
 	br_skb_cb_restore(skb, &cb, IP6CB(skb)->frag_max_size);
 	return err == 0 ? NF_ACCEPT : NF_DROP;
+#else
+	return NF_ACCEPT;
+#endif
 }
 
 static int nf_ct_br_ip_check(const struct sk_buff *skb)
diff --git a/net/ipv6/netfilter.c b/net/ipv6/netfilter.c
index 409e79b84a830..6d0e942d082d4 100644
--- a/net/ipv6/netfilter.c
+++ b/net/ipv6/netfilter.c
@@ -245,9 +245,6 @@ static const struct nf_ipv6_ops ipv6ops = {
 	.route_input		= ip6_route_input,
 	.fragment		= ip6_fragment,
 	.reroute		= nf_ip6_reroute,
-#if IS_MODULE(CONFIG_IPV6) && IS_ENABLED(CONFIG_NF_DEFRAG_IPV6)
-	.br_defrag		= nf_ct_frag6_gather,
-#endif
 #if IS_MODULE(CONFIG_IPV6)
 	.br_fragment		= br_ip6_fragment,
 #endif
-- 
2.25.1

[PATCH AUTOSEL 5.8 24/63] libbpf: Prevent overriding errno when logging errors

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 23ab656be263813acc3c20623757d3cd1496d9e1 ]

Turns out there were a few more instances where libbpf didn't save the
errno before writing an error message, causing errno to be overridden by
the printf() return and the error disappearing if logging is enabled.

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200813142905.160381-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/libbpf.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 11e4725b8b1c0..e8e88c1ab69de 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -3319,10 +3319,11 @@ bpf_object__probe_global_data(struct bpf_object *obj)
 
 	map = bpf_create_map_xattr(&map_attr);
 	if (map < 0) {
-		cp = libbpf_strerror_r(errno, errmsg, sizeof(errmsg));
+		ret = -errno;
+		cp = libbpf_strerror_r(ret, errmsg, sizeof(errmsg));
 		pr_warn("Error in %s():%s(%d). Couldn't create simple array map.\n",
-			__func__, cp, errno);
-		return -errno;
+			__func__, cp, -ret);
+		return ret;
 	}
 
 	insns[0].imm = map;
@@ -5775,9 +5776,10 @@ int bpf_program__pin_instance(struct bpf_program *prog, const char *path,
 	}
 
 	if (bpf_obj_pin(prog->instances.fds[instance], path)) {
-		cp = libbpf_strerror_r(errno, errmsg, sizeof(errmsg));
+		err = -errno;
+		cp = libbpf_strerror_r(err, errmsg, sizeof(errmsg));
 		pr_warn("failed to pin program: %s\n", cp);
-		return -errno;
+		return err;
 	}
 	pr_debug("pinned program '%s'\n", path);
 
-- 
2.25.1

[PATCH AUTOSEL 5.8 25/63] tools/bpftool: Fix compilation warnings in 32-bit mode

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit 09f44b753a7d120becc80213c3459183c8acd26b ]

Fix few compilation warnings in bpftool when compiling in 32-bit mode.
Abstract away u64 to pointer conversion into a helper function.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-2-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bpf/bpftool/btf_dumper.c |  2 +-
 tools/bpf/bpftool/link.c       |  4 ++--
 tools/bpf/bpftool/main.h       | 10 +++++++++-
 tools/bpf/bpftool/prog.c       | 16 ++++++++--------
 4 files changed, 20 insertions(+), 12 deletions(-)

diff --git a/tools/bpf/bpftool/btf_dumper.c b/tools/bpf/bpftool/btf_dumper.c
index ede162f83eea0..0e9310727281a 100644
--- a/tools/bpf/bpftool/btf_dumper.c
+++ b/tools/bpf/bpftool/btf_dumper.c
@@ -67,7 +67,7 @@ static int dump_prog_id_as_func_ptr(const struct btf_dumper *d,
 	if (!info->btf_id || !info->nr_func_info ||
 	    btf__get_from_id(info->btf_id, &prog_btf))
 		goto print;
-	finfo = (struct bpf_func_info *)info->func_info;
+	finfo = u64_to_ptr(info->func_info);
 	func_type = btf__type_by_id(prog_btf, finfo->type_id);
 	if (!func_type || !btf_is_func(func_type))
 		goto print;
diff --git a/tools/bpf/bpftool/link.c b/tools/bpf/bpftool/link.c
index fca57ee8fafe4..dea691c83afca 100644
--- a/tools/bpf/bpftool/link.c
+++ b/tools/bpf/bpftool/link.c
@@ -101,7 +101,7 @@ static int show_link_close_json(int fd, struct bpf_link_info *info)
 	switch (info->type) {
 	case BPF_LINK_TYPE_RAW_TRACEPOINT:
 		jsonw_string_field(json_wtr, "tp_name",
-				   (const char *)info->raw_tracepoint.tp_name);
+				   u64_to_ptr(info->raw_tracepoint.tp_name));
 		break;
 	case BPF_LINK_TYPE_TRACING:
 		err = get_prog_info(info->prog_id, &prog_info);
@@ -177,7 +177,7 @@ static int show_link_close_plain(int fd, struct bpf_link_info *info)
 	switch (info->type) {
 	case BPF_LINK_TYPE_RAW_TRACEPOINT:
 		printf("\n\ttp '%s'  ",
-		       (const char *)info->raw_tracepoint.tp_name);
+		       (const char *)u64_to_ptr(info->raw_tracepoint.tp_name));
 		break;
 	case BPF_LINK_TYPE_TRACING:
 		err = get_prog_info(info->prog_id, &prog_info);
diff --git a/tools/bpf/bpftool/main.h b/tools/bpf/bpftool/main.h
index 5cdf0bc049bd9..5917484c2e027 100644
--- a/tools/bpf/bpftool/main.h
+++ b/tools/bpf/bpftool/main.h
@@ -21,7 +21,15 @@
 /* Make sure we do not use kernel-only integer typedefs */
 #pragma GCC poison u8 u16 u32 u64 s8 s16 s32 s64
 
-#define ptr_to_u64(ptr)	((__u64)(unsigned long)(ptr))
+static inline __u64 ptr_to_u64(const void *ptr)
+{
+	return (__u64)(unsigned long)ptr;
+}
+
+static inline void *u64_to_ptr(__u64 ptr)
+{
+	return (void *)(unsigned long)ptr;
+}
 
 #define NEXT_ARG()	({ argc--; argv++; if (argc < 0) usage(); })
 #define NEXT_ARGP()	({ (*argc)--; (*argv)++; if (*argc < 0) usage(); })
diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c
index a5eff83496f2d..2c6f7e160b248 100644
--- a/tools/bpf/bpftool/prog.c
+++ b/tools/bpf/bpftool/prog.c
@@ -537,14 +537,14 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
 			p_info("no instructions returned");
 			return -1;
 		}
-		buf = (unsigned char *)(info->jited_prog_insns);
+		buf = u64_to_ptr(info->jited_prog_insns);
 		member_len = info->jited_prog_len;
 	} else {	/* DUMP_XLATED */
 		if (info->xlated_prog_len == 0 || !info->xlated_prog_insns) {
 			p_err("error retrieving insn dump: kernel.kptr_restrict set?");
 			return -1;
 		}
-		buf = (unsigned char *)info->xlated_prog_insns;
+		buf = u64_to_ptr(info->xlated_prog_insns);
 		member_len = info->xlated_prog_len;
 	}
 
@@ -553,7 +553,7 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
 		return -1;
 	}
 
-	func_info = (void *)info->func_info;
+	func_info = u64_to_ptr(info->func_info);
 
 	if (info->nr_line_info) {
 		prog_linfo = bpf_prog_linfo__new(info);
@@ -571,7 +571,7 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
 
 		n = write(fd, buf, member_len);
 		close(fd);
-		if (n != member_len) {
+		if (n != (ssize_t)member_len) {
 			p_err("error writing output file: %s",
 			      n < 0 ? strerror(errno) : "short write");
 			return -1;
@@ -601,13 +601,13 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
 			__u32 i;
 			if (info->nr_jited_ksyms) {
 				kernel_syms_load(&dd);
-				ksyms = (__u64 *) info->jited_ksyms;
+				ksyms = u64_to_ptr(info->jited_ksyms);
 			}
 
 			if (json_output)
 				jsonw_start_array(json_wtr);
 
-			lens = (__u32 *) info->jited_func_lens;
+			lens = u64_to_ptr(info->jited_func_lens);
 			for (i = 0; i < info->nr_jited_func_lens; i++) {
 				if (ksyms) {
 					sym = kernel_syms_search(&dd, ksyms[i]);
@@ -668,7 +668,7 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
 	} else {
 		kernel_syms_load(&dd);
 		dd.nr_jited_ksyms = info->nr_jited_ksyms;
-		dd.jited_ksyms = (__u64 *) info->jited_ksyms;
+		dd.jited_ksyms = u64_to_ptr(info->jited_ksyms);
 		dd.btf = btf;
 		dd.func_info = func_info;
 		dd.finfo_rec_size = info->func_info_rec_size;
@@ -1790,7 +1790,7 @@ static char *profile_target_name(int tgt_fd)
 		goto out;
 	}
 
-	func_info = (struct bpf_func_info *)(info_linear->info.func_info);
+	func_info = u64_to_ptr(info_linear->info.func_info);
 	t = btf__type_by_id(btf, func_info[0].type_id);
 	if (!t) {
 		p_err("btf %d doesn't have type %d",
-- 
2.25.1

[PATCH AUTOSEL 5.8 26/63] selftest/bpf: Fix compilation warnings in 32-bit mode

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit 9028bbcc3e12510cac13a9554f1a1e39667a4387 ]

Fix compilation warnings emitted when compiling selftests for 32-bit platform
(x86 in my case).

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-3-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c     | 8 ++++----
 tools/testing/selftests/bpf/prog_tests/core_extern.c    | 4 ++--
 tools/testing/selftests/bpf/prog_tests/fexit_bpf2bpf.c  | 6 +++---
 tools/testing/selftests/bpf/prog_tests/flow_dissector.c | 2 +-
 tools/testing/selftests/bpf/prog_tests/global_data.c    | 6 +++---
 tools/testing/selftests/bpf/prog_tests/prog_run_xattr.c | 2 +-
 tools/testing/selftests/bpf/prog_tests/skb_ctx.c        | 2 +-
 tools/testing/selftests/bpf/test_btf.c                  | 8 ++++----
 tools/testing/selftests/bpf/test_progs.h                | 5 +++++
 9 files changed, 24 insertions(+), 19 deletions(-)

diff --git a/tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c b/tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c
index 7afa4160416f6..284d5921c3458 100644
--- a/tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c
+++ b/tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c
@@ -159,15 +159,15 @@ void test_bpf_obj_id(void)
 		/* Check getting link info */
 		info_len = sizeof(struct bpf_link_info) * 2;
 		bzero(&link_infos[i], info_len);
-		link_infos[i].raw_tracepoint.tp_name = (__u64)&tp_name;
+		link_infos[i].raw_tracepoint.tp_name = ptr_to_u64(&tp_name);
 		link_infos[i].raw_tracepoint.tp_name_len = sizeof(tp_name);
 		err = bpf_obj_get_info_by_fd(bpf_link__fd(links[i]),
 					     &link_infos[i], &info_len);
 		if (CHECK(err ||
 			  link_infos[i].type != BPF_LINK_TYPE_RAW_TRACEPOINT ||
 			  link_infos[i].prog_id != prog_infos[i].id ||
-			  link_infos[i].raw_tracepoint.tp_name != (__u64)&tp_name ||
-			  strcmp((char *)link_infos[i].raw_tracepoint.tp_name,
+			  link_infos[i].raw_tracepoint.tp_name != ptr_to_u64(&tp_name) ||
+			  strcmp(u64_to_ptr(link_infos[i].raw_tracepoint.tp_name),
 				 "sys_enter") ||
 			  info_len != sizeof(struct bpf_link_info),
 			  "get-link-info(fd)",
@@ -178,7 +178,7 @@ void test_bpf_obj_id(void)
 			  link_infos[i].type, BPF_LINK_TYPE_RAW_TRACEPOINT,
 			  link_infos[i].id,
 			  link_infos[i].prog_id, prog_infos[i].id,
-			  (char *)link_infos[i].raw_tracepoint.tp_name,
+			  (const char *)u64_to_ptr(link_infos[i].raw_tracepoint.tp_name),
 			  "sys_enter"))
 			goto done;
 
diff --git a/tools/testing/selftests/bpf/prog_tests/core_extern.c b/tools/testing/selftests/bpf/prog_tests/core_extern.c
index b093787e94489..1931a158510e0 100644
--- a/tools/testing/selftests/bpf/prog_tests/core_extern.c
+++ b/tools/testing/selftests/bpf/prog_tests/core_extern.c
@@ -159,8 +159,8 @@ void test_core_extern(void)
 		exp = (uint64_t *)&t->data;
 		for (j = 0; j < n; j++) {
 			CHECK(got[j] != exp[j], "check_res",
-			      "result #%d: expected %lx, but got %lx\n",
-			       j, exp[j], got[j]);
+			      "result #%d: expected %llx, but got %llx\n",
+			       j, (__u64)exp[j], (__u64)got[j]);
 		}
 cleanup:
 		test_core_extern__destroy(skel);
diff --git a/tools/testing/selftests/bpf/prog_tests/fexit_bpf2bpf.c b/tools/testing/selftests/bpf/prog_tests/fexit_bpf2bpf.c
index a895bfed55db0..197d0d217b56b 100644
--- a/tools/testing/selftests/bpf/prog_tests/fexit_bpf2bpf.c
+++ b/tools/testing/selftests/bpf/prog_tests/fexit_bpf2bpf.c
@@ -16,7 +16,7 @@ static void test_fexit_bpf2bpf_common(const char *obj_file,
 	__u32 duration = 0, retval;
 	struct bpf_map *data_map;
 	const int zero = 0;
-	u64 *result = NULL;
+	__u64 *result = NULL;
 
 	err = bpf_prog_load(target_obj_file, BPF_PROG_TYPE_UNSPEC,
 			    &pkt_obj, &pkt_fd);
@@ -29,7 +29,7 @@ static void test_fexit_bpf2bpf_common(const char *obj_file,
 
 	link = calloc(sizeof(struct bpf_link *), prog_cnt);
 	prog = calloc(sizeof(struct bpf_program *), prog_cnt);
-	result = malloc((prog_cnt + 32 /* spare */) * sizeof(u64));
+	result = malloc((prog_cnt + 32 /* spare */) * sizeof(__u64));
 	if (CHECK(!link || !prog || !result, "alloc_memory",
 		  "failed to alloc memory"))
 		goto close_prog;
@@ -72,7 +72,7 @@ static void test_fexit_bpf2bpf_common(const char *obj_file,
 		goto close_prog;
 
 	for (i = 0; i < prog_cnt; i++)
-		if (CHECK(result[i] != 1, "result", "fexit_bpf2bpf failed err %ld\n",
+		if (CHECK(result[i] != 1, "result", "fexit_bpf2bpf failed err %llu\n",
 			  result[i]))
 			goto close_prog;
 
diff --git a/tools/testing/selftests/bpf/prog_tests/flow_dissector.c b/tools/testing/selftests/bpf/prog_tests/flow_dissector.c
index f11f187990e95..cd6dc80edf18e 100644
--- a/tools/testing/selftests/bpf/prog_tests/flow_dissector.c
+++ b/tools/testing/selftests/bpf/prog_tests/flow_dissector.c
@@ -591,7 +591,7 @@ void test_flow_dissector(void)
 		CHECK_ATTR(tattr.data_size_out != sizeof(flow_keys) ||
 			   err || tattr.retval != 1,
 			   tests[i].name,
-			   "err %d errno %d retval %d duration %d size %u/%lu\n",
+			   "err %d errno %d retval %d duration %d size %u/%zu\n",
 			   err, errno, tattr.retval, tattr.duration,
 			   tattr.data_size_out, sizeof(flow_keys));
 		CHECK_FLOW_KEYS(tests[i].name, flow_keys, tests[i].keys);
diff --git a/tools/testing/selftests/bpf/prog_tests/global_data.c b/tools/testing/selftests/bpf/prog_tests/global_data.c
index e3cb62b0a110e..9efa7e50eab27 100644
--- a/tools/testing/selftests/bpf/prog_tests/global_data.c
+++ b/tools/testing/selftests/bpf/prog_tests/global_data.c
@@ -5,7 +5,7 @@
 static void test_global_data_number(struct bpf_object *obj, __u32 duration)
 {
 	int i, err, map_fd;
-	uint64_t num;
+	__u64 num;
 
 	map_fd = bpf_find_map(__func__, obj, "result_number");
 	if (CHECK_FAIL(map_fd < 0))
@@ -14,7 +14,7 @@ static void test_global_data_number(struct bpf_object *obj, __u32 duration)
 	struct {
 		char *name;
 		uint32_t key;
-		uint64_t num;
+		__u64 num;
 	} tests[] = {
 		{ "relocate .bss reference",     0, 0 },
 		{ "relocate .data reference",    1, 42 },
@@ -32,7 +32,7 @@ static void test_global_data_number(struct bpf_object *obj, __u32 duration)
 	for (i = 0; i < sizeof(tests) / sizeof(tests[0]); i++) {
 		err = bpf_map_lookup_elem(map_fd, &tests[i].key, &num);
 		CHECK(err || num != tests[i].num, tests[i].name,
-		      "err %d result %lx expected %lx\n",
+		      "err %d result %llx expected %llx\n",
 		      err, num, tests[i].num);
 	}
 }
diff --git a/tools/testing/selftests/bpf/prog_tests/prog_run_xattr.c b/tools/testing/selftests/bpf/prog_tests/prog_run_xattr.c
index dde2b7ae7bc9e..935a294f049a2 100644
--- a/tools/testing/selftests/bpf/prog_tests/prog_run_xattr.c
+++ b/tools/testing/selftests/bpf/prog_tests/prog_run_xattr.c
@@ -28,7 +28,7 @@ void test_prog_run_xattr(void)
 	      "err %d errno %d retval %d\n", err, errno, tattr.retval);
 
 	CHECK_ATTR(tattr.data_size_out != sizeof(pkt_v4), "data_size_out",
-	      "incorrect output size, want %lu have %u\n",
+	      "incorrect output size, want %zu have %u\n",
 	      sizeof(pkt_v4), tattr.data_size_out);
 
 	CHECK_ATTR(buf[5] != 0, "overflow",
diff --git a/tools/testing/selftests/bpf/prog_tests/skb_ctx.c b/tools/testing/selftests/bpf/prog_tests/skb_ctx.c
index 7021b92af3134..c61b2b69710a9 100644
--- a/tools/testing/selftests/bpf/prog_tests/skb_ctx.c
+++ b/tools/testing/selftests/bpf/prog_tests/skb_ctx.c
@@ -80,7 +80,7 @@ void test_skb_ctx(void)
 
 	CHECK_ATTR(tattr.ctx_size_out != sizeof(skb),
 		   "ctx_size_out",
-		   "incorrect output size, want %lu have %u\n",
+		   "incorrect output size, want %zu have %u\n",
 		   sizeof(skb), tattr.ctx_size_out);
 
 	for (i = 0; i < 5; i++)
diff --git a/tools/testing/selftests/bpf/test_btf.c b/tools/testing/selftests/bpf/test_btf.c
index 305fae8f80a98..c75fc6447186a 100644
--- a/tools/testing/selftests/bpf/test_btf.c
+++ b/tools/testing/selftests/bpf/test_btf.c
@@ -3883,7 +3883,7 @@ static int test_big_btf_info(unsigned int test_num)
 	info_garbage.garbage = 0;
 	err = bpf_obj_get_info_by_fd(btf_fd, info, &info_len);
 	if (CHECK(err || info_len != sizeof(*info),
-		  "err:%d errno:%d info_len:%u sizeof(*info):%lu",
+		  "err:%d errno:%d info_len:%u sizeof(*info):%zu",
 		  err, errno, info_len, sizeof(*info))) {
 		err = -1;
 		goto done;
@@ -4094,7 +4094,7 @@ static int do_test_get_info(unsigned int test_num)
 	if (CHECK(err || !info.id || info_len != sizeof(info) ||
 		  info.btf_size != raw_btf_size ||
 		  (ret = memcmp(raw_btf, user_btf, expected_nbytes)),
-		  "err:%d errno:%d info.id:%u info_len:%u sizeof(info):%lu raw_btf_size:%u info.btf_size:%u expected_nbytes:%u memcmp:%d",
+		  "err:%d errno:%d info.id:%u info_len:%u sizeof(info):%zu raw_btf_size:%u info.btf_size:%u expected_nbytes:%u memcmp:%d",
 		  err, errno, info.id, info_len, sizeof(info),
 		  raw_btf_size, info.btf_size, expected_nbytes, ret)) {
 		err = -1;
@@ -4730,7 +4730,7 @@ ssize_t get_pprint_expected_line(enum pprint_mapv_kind_t mapv_kind,
 
 		nexpected_line = snprintf(expected_line, line_size,
 					  "%s%u: {%u,0,%d,0x%x,0x%x,0x%x,"
-					  "{%lu|[%u,%u,%u,%u,%u,%u,%u,%u]},%s,"
+					  "{%llu|[%u,%u,%u,%u,%u,%u,%u,%u]},%s,"
 					  "%u,0x%x,[[%d,%d],[%d,%d]]}\n",
 					  percpu_map ? "\tcpu" : "",
 					  percpu_map ? cpu : next_key,
@@ -4738,7 +4738,7 @@ ssize_t get_pprint_expected_line(enum pprint_mapv_kind_t mapv_kind,
 					  v->unused_bits2a,
 					  v->bits28,
 					  v->unused_bits2b,
-					  v->ui64,
+					  (__u64)v->ui64,
 					  v->ui8a[0], v->ui8a[1],
 					  v->ui8a[2], v->ui8a[3],
 					  v->ui8a[4], v->ui8a[5],
diff --git a/tools/testing/selftests/bpf/test_progs.h b/tools/testing/selftests/bpf/test_progs.h
index b809246039181..b5670350e3263 100644
--- a/tools/testing/selftests/bpf/test_progs.h
+++ b/tools/testing/selftests/bpf/test_progs.h
@@ -133,6 +133,11 @@ static inline __u64 ptr_to_u64(const void *ptr)
 	return (__u64) (unsigned long) ptr;
 }
 
+static inline void *u64_to_ptr(__u64 ptr)
+{
+	return (void *) (unsigned long) ptr;
+}
+
 int bpf_find_map(const char *test, struct bpf_object *obj, const char *name);
 int compare_map_keys(int map1_fd, int map2_fd);
 int compare_stack_ips(int smap_fd, int amap_fd, int stack_trace_len);
-- 
2.25.1

[PATCH AUTOSEL 5.8 27/63] selftests/bpf: Fix btf_dump test cases on 32-bit arches

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit eed7818adf03e874994b966aa33bc00204dd275a ]

Fix btf_dump test cases by hard-coding BPF's pointer size of 8 bytes for cases
where it's impossible to deterimne the pointer size (no long type in BTF). In
cases where it's known, validate libbpf correctly determines it as 8.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-6-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/bpf/prog_tests/btf_dump.c       | 27 ++++++++++++++-----
 1 file changed, 20 insertions(+), 7 deletions(-)

diff --git a/tools/testing/selftests/bpf/prog_tests/btf_dump.c b/tools/testing/selftests/bpf/prog_tests/btf_dump.c
index cb33a7ee4e04f..39fb81d9daeb5 100644
--- a/tools/testing/selftests/bpf/prog_tests/btf_dump.c
+++ b/tools/testing/selftests/bpf/prog_tests/btf_dump.c
@@ -12,15 +12,16 @@ void btf_dump_printf(void *ctx, const char *fmt, va_list args)
 static struct btf_dump_test_case {
 	const char *name;
 	const char *file;
+	bool known_ptr_sz;
 	struct btf_dump_opts opts;
 } btf_dump_test_cases[] = {
-	{"btf_dump: syntax", "btf_dump_test_case_syntax", {}},
-	{"btf_dump: ordering", "btf_dump_test_case_ordering", {}},
-	{"btf_dump: padding", "btf_dump_test_case_padding", {}},
-	{"btf_dump: packing", "btf_dump_test_case_packing", {}},
-	{"btf_dump: bitfields", "btf_dump_test_case_bitfields", {}},
-	{"btf_dump: multidim", "btf_dump_test_case_multidim", {}},
-	{"btf_dump: namespacing", "btf_dump_test_case_namespacing", {}},
+	{"btf_dump: syntax", "btf_dump_test_case_syntax", true, {}},
+	{"btf_dump: ordering", "btf_dump_test_case_ordering", false, {}},
+	{"btf_dump: padding", "btf_dump_test_case_padding", true, {}},
+	{"btf_dump: packing", "btf_dump_test_case_packing", true, {}},
+	{"btf_dump: bitfields", "btf_dump_test_case_bitfields", true, {}},
+	{"btf_dump: multidim", "btf_dump_test_case_multidim", false, {}},
+	{"btf_dump: namespacing", "btf_dump_test_case_namespacing", false, {}},
 };
 
 static int btf_dump_all_types(const struct btf *btf,
@@ -62,6 +63,18 @@ static int test_btf_dump_case(int n, struct btf_dump_test_case *t)
 		goto done;
 	}
 
+	/* tests with t->known_ptr_sz have no "long" or "unsigned long" type,
+	 * so it's impossible to determine correct pointer size; but if they
+	 * do, it should be 8 regardless of host architecture, becaues BPF
+	 * target is always 64-bit
+	 */
+	if (!t->known_ptr_sz) {
+		btf__set_pointer_size(btf, 8);
+	} else {
+		CHECK(btf__pointer_size(btf) != 8, "ptr_sz", "exp %d, got %zu\n",
+		      8, btf__pointer_size(btf));
+	}
+
 	snprintf(out_file, sizeof(out_file), "/tmp/%s.output.XXXXXX", t->file);
 	fd = mkstemp(out_file);
 	if (CHECK(fd < 0, "create_tmp", "failed to create file: %d\n", fd)) {
-- 
2.25.1

[PATCH AUTOSEL 5.8 28/63] selftests/bpf: Correct various core_reloc 64-bit assumptions

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit 5705d705832f74395c5465ce93192688f543006a ]

Ensure that types are memory layout- and field alignment-compatible regardless
of 32/64-bitness mix of libbpf and BPF architecture.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-8-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/bpf/prog_tests/core_reloc.c     | 20 +++---
 .../selftests/bpf/progs/core_reloc_types.h    | 69 ++++++++++---------
 2 files changed, 47 insertions(+), 42 deletions(-)

diff --git a/tools/testing/selftests/bpf/prog_tests/core_reloc.c b/tools/testing/selftests/bpf/prog_tests/core_reloc.c
index 084ed26a7d78c..a54eafc5e4b31 100644
--- a/tools/testing/selftests/bpf/prog_tests/core_reloc.c
+++ b/tools/testing/selftests/bpf/prog_tests/core_reloc.c
@@ -237,8 +237,8 @@
 		.union_sz = sizeof(((type *)0)->union_field),		\
 		.arr_sz = sizeof(((type *)0)->arr_field),		\
 		.arr_elem_sz = sizeof(((type *)0)->arr_field[0]),	\
-		.ptr_sz = sizeof(((type *)0)->ptr_field),		\
-		.enum_sz = sizeof(((type *)0)->enum_field),	\
+		.ptr_sz = 8, /* always 8-byte pointer for BPF */	\
+		.enum_sz = sizeof(((type *)0)->enum_field),		\
 	}
 
 #define SIZE_CASE(name) {						\
@@ -432,20 +432,20 @@ static struct core_reloc_test_case test_cases[] = {
 		.sb4 = -1,
 		.sb20 = -0x17654321,
 		.u32 = 0xBEEF,
-		.s32 = -0x3FEDCBA987654321,
+		.s32 = -0x3FEDCBA987654321LL,
 	}),
 	BITFIELDS_CASE(bitfields___bitfield_vs_int, {
-		.ub1 = 0xFEDCBA9876543210,
+		.ub1 = 0xFEDCBA9876543210LL,
 		.ub2 = 0xA6,
-		.ub7 = -0x7EDCBA987654321,
-		.sb4 = -0x6123456789ABCDE,
-		.sb20 = 0xD00D,
+		.ub7 = -0x7EDCBA987654321LL,
+		.sb4 = -0x6123456789ABCDELL,
+		.sb20 = 0xD00DLL,
 		.u32 = -0x76543,
-		.s32 = 0x0ADEADBEEFBADB0B,
+		.s32 = 0x0ADEADBEEFBADB0BLL,
 	}),
 	BITFIELDS_CASE(bitfields___just_big_enough, {
-		.ub1 = 0xF,
-		.ub2 = 0x0812345678FEDCBA,
+		.ub1 = 0xFLL,
+		.ub2 = 0x0812345678FEDCBALL,
 	}),
 	BITFIELDS_ERR_CASE(bitfields___err_too_big_bitfield),
 
diff --git a/tools/testing/selftests/bpf/progs/core_reloc_types.h b/tools/testing/selftests/bpf/progs/core_reloc_types.h
index 34d84717c9464..69139ed662164 100644
--- a/tools/testing/selftests/bpf/progs/core_reloc_types.h
+++ b/tools/testing/selftests/bpf/progs/core_reloc_types.h
@@ -1,5 +1,10 @@
 #include <stdint.h>
 #include <stdbool.h>
+
+void preserce_ptr_sz_fn(long x) {}
+
+#define __bpf_aligned __attribute__((aligned(8)))
+
 /*
  * KERNEL
  */
@@ -444,51 +449,51 @@ struct core_reloc_primitives {
 	char a;
 	int b;
 	enum core_reloc_primitives_enum c;
-	void *d;
-	int (*f)(const char *);
+	void *d __bpf_aligned;
+	int (*f)(const char *) __bpf_aligned;
 };
 
 struct core_reloc_primitives___diff_enum_def {
 	char a;
 	int b;
-	void *d;
-	int (*f)(const char *);
+	void *d __bpf_aligned;
+	int (*f)(const char *) __bpf_aligned;
 	enum {
 		X = 100,
 		Y = 200,
-	} c; /* inline enum def with differing set of values */
+	} c __bpf_aligned; /* inline enum def with differing set of values */
 };
 
 struct core_reloc_primitives___diff_func_proto {
-	void (*f)(int); /* incompatible function prototype */
-	void *d;
-	enum core_reloc_primitives_enum c;
+	void (*f)(int) __bpf_aligned; /* incompatible function prototype */
+	void *d __bpf_aligned;
+	enum core_reloc_primitives_enum c __bpf_aligned;
 	int b;
 	char a;
 };
 
 struct core_reloc_primitives___diff_ptr_type {
-	const char * const d; /* different pointee type + modifiers */
-	char a;
+	const char * const d __bpf_aligned; /* different pointee type + modifiers */
+	char a __bpf_aligned;
 	int b;
 	enum core_reloc_primitives_enum c;
-	int (*f)(const char *);
+	int (*f)(const char *) __bpf_aligned;
 };
 
 struct core_reloc_primitives___err_non_enum {
 	char a[1];
 	int b;
 	int c; /* int instead of enum */
-	void *d;
-	int (*f)(const char *);
+	void *d __bpf_aligned;
+	int (*f)(const char *) __bpf_aligned;
 };
 
 struct core_reloc_primitives___err_non_int {
 	char a[1];
-	int *b; /* ptr instead of int */
-	enum core_reloc_primitives_enum c;
-	void *d;
-	int (*f)(const char *);
+	int *b __bpf_aligned; /* ptr instead of int */
+	enum core_reloc_primitives_enum c __bpf_aligned;
+	void *d __bpf_aligned;
+	int (*f)(const char *) __bpf_aligned;
 };
 
 struct core_reloc_primitives___err_non_ptr {
@@ -496,7 +501,7 @@ struct core_reloc_primitives___err_non_ptr {
 	int b;
 	enum core_reloc_primitives_enum c;
 	int d; /* int instead of ptr */
-	int (*f)(const char *);
+	int (*f)(const char *) __bpf_aligned;
 };
 
 /*
@@ -507,7 +512,7 @@ struct core_reloc_mods_output {
 };
 
 typedef const int int_t;
-typedef const char *char_ptr_t;
+typedef const char *char_ptr_t __bpf_aligned;
 typedef const int arr_t[7];
 
 struct core_reloc_mods_substruct {
@@ -523,9 +528,9 @@ typedef struct {
 struct core_reloc_mods {
 	int a;
 	int_t b;
-	char *c;
+	char *c __bpf_aligned;
 	char_ptr_t d;
-	int e[3];
+	int e[3] __bpf_aligned;
 	arr_t f;
 	struct core_reloc_mods_substruct g;
 	core_reloc_mods_substruct_t h;
@@ -535,9 +540,9 @@ struct core_reloc_mods {
 struct core_reloc_mods___mod_swap {
 	int b;
 	int_t a;
-	char *d;
+	char *d __bpf_aligned;
 	char_ptr_t c;
-	int f[3];
+	int f[3] __bpf_aligned;
 	arr_t e;
 	struct {
 		int y;
@@ -555,7 +560,7 @@ typedef arr1_t arr2_t;
 typedef arr2_t arr3_t;
 typedef arr3_t arr4_t;
 
-typedef const char * const volatile fancy_char_ptr_t;
+typedef const char * const volatile fancy_char_ptr_t __bpf_aligned;
 
 typedef core_reloc_mods_substruct_t core_reloc_mods_substruct_tt;
 
@@ -567,7 +572,7 @@ struct core_reloc_mods___typedefs {
 	arr4_t e;
 	fancy_char_ptr_t d;
 	fancy_char_ptr_t c;
-	int3_t b;
+	int3_t b __bpf_aligned;
 	int3_t a;
 };
 
@@ -739,19 +744,19 @@ struct core_reloc_bitfields___bit_sz_change {
 	int8_t		sb4: 1;		/*  4 ->  1 */
 	int32_t		sb20: 30;	/* 20 -> 30 */
 	/* non-bitfields */
-	uint16_t	u32;		/* 32 -> 16 */
-	int64_t		s32;		/* 32 -> 64 */
+	uint16_t	u32;			/* 32 -> 16 */
+	int64_t		s32 __bpf_aligned;	/* 32 -> 64 */
 };
 
 /* turn bitfield into non-bitfield and vice versa */
 struct core_reloc_bitfields___bitfield_vs_int {
 	uint64_t	ub1;		/*  3 -> 64 non-bitfield */
 	uint8_t		ub2;		/* 20 ->  8 non-bitfield */
-	int64_t		ub7;		/*  7 -> 64 non-bitfield signed */
-	int64_t		sb4;		/*  4 -> 64 non-bitfield signed */
-	uint64_t	sb20;		/* 20 -> 16 non-bitfield unsigned */
-	int32_t		u32: 20;	/* 32 non-bitfield -> 20 bitfield */
-	uint64_t	s32: 60;	/* 32 non-bitfield -> 60 bitfield */
+	int64_t		ub7 __bpf_aligned;	/*  7 -> 64 non-bitfield signed */
+	int64_t		sb4 __bpf_aligned;	/*  4 -> 64 non-bitfield signed */
+	uint64_t	sb20 __bpf_aligned;	/* 20 -> 16 non-bitfield unsigned */
+	int32_t		u32: 20;		/* 32 non-bitfield -> 20 bitfield */
+	uint64_t	s32: 60 __bpf_aligned;	/* 32 non-bitfield -> 60 bitfield */
 };
 
 struct core_reloc_bitfields___just_big_enough {
-- 
2.25.1

[PATCH AUTOSEL 5.8 29/63] can: j1939: transport: j1939_xtp_rx_dat_one(): compare own packets to detect corruptions

[Sasha Levin]

From: Oleksij Rempel <o.rempel@pengutronix.de>

[ Upstream commit e052d0540298bfe0f6cbbecdc7e2ea9b859575b2 ]

Since the stack relays on receiving own packets, it was overwriting own
transmit buffer from received packets.

At least theoretically, the received echo buffer can be corrupt or
changed and the session partner can request to resend previous data. In
this case we will re-send bad data.

With this patch we will stop to overwrite own TX buffer and use it for
sanity checking.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-6-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/can/j1939/transport.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c
index 9f99af5b0b11e..3e9c377b0dcce 100644
--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -1769,7 +1769,20 @@ static void j1939_xtp_rx_dat_one(struct j1939_session *session,
 	}
 
 	tpdat = se_skb->data;
-	memcpy(&tpdat[offset], &dat[1], nbytes);
+	if (!session->transmission) {
+		memcpy(&tpdat[offset], &dat[1], nbytes);
+	} else {
+		int err;
+
+		err = memcmp(&tpdat[offset], &dat[1], nbytes);
+		if (err)
+			netdev_err_once(priv->ndev,
+					"%s: 0x%p: Data of RX-looped back packet (%*ph) doesn't match TX data (%*ph)!\n",
+					__func__, session,
+					nbytes, &dat[1],
+					nbytes, &tpdat[offset]);
+	}
+
 	if (packet == session->pkt.rx)
 		session->pkt.rx++;
 
-- 
2.25.1

[PATCH AUTOSEL 5.8 30/63] dma-pool: fix coherent pool allocations for IOMMU mappings

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 9420139f516d7fbc248ce17f35275cb005ed98ea ]

When allocating coherent pool memory for an IOMMU mapping we don't care
about the DMA mask.  Move the guess for the initial GFP mask into the
dma_direct_alloc_pages and pass dma_coherent_ok as a function pointer
argument so that it doesn't get applied to the IOMMU case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/dma-iommu.c   |   4 +-
 include/linux/dma-direct.h  |   3 -
 include/linux/dma-mapping.h |   5 +-
 kernel/dma/direct.c         |  13 ++--
 kernel/dma/pool.c           | 114 +++++++++++++++---------------------
 5 files changed, 62 insertions(+), 77 deletions(-)

diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
index 4959f5df21bd0..5141d49a046ba 100644
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -1035,8 +1035,8 @@ static void *iommu_dma_alloc(struct device *dev, size_t size,
 
 	if (IS_ENABLED(CONFIG_DMA_DIRECT_REMAP) &&
 	    !gfpflags_allow_blocking(gfp) && !coherent)
-		cpu_addr = dma_alloc_from_pool(dev, PAGE_ALIGN(size), &page,
-					       gfp);
+		page = dma_alloc_from_pool(dev, PAGE_ALIGN(size), &cpu_addr,
+					       gfp, NULL);
 	else
 		cpu_addr = iommu_dma_alloc_pages(dev, size, &page, gfp, attrs);
 	if (!cpu_addr)
diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
index ab2e20cba9514..ba22952c24e24 100644
--- a/include/linux/dma-direct.h
+++ b/include/linux/dma-direct.h
@@ -67,9 +67,6 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size,
 }
 
 u64 dma_direct_get_required_mask(struct device *dev);
-gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 dma_mask,
-				  u64 *phys_mask);
-bool dma_coherent_ok(struct device *dev, phys_addr_t phys, size_t size);
 void *dma_direct_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
 		gfp_t gfp, unsigned long attrs);
 void dma_direct_free(struct device *dev, size_t size, void *cpu_addr,
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index a33ed3954ed46..0dc08701d7b7e 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -715,8 +715,9 @@ void *dma_common_pages_remap(struct page **pages, size_t size,
 			pgprot_t prot, const void *caller);
 void dma_common_free_remap(void *cpu_addr, size_t size);
 
-void *dma_alloc_from_pool(struct device *dev, size_t size,
-			  struct page **ret_page, gfp_t flags);
+struct page *dma_alloc_from_pool(struct device *dev, size_t size,
+		void **cpu_addr, gfp_t flags,
+		bool (*phys_addr_ok)(struct device *, phys_addr_t, size_t));
 bool dma_free_from_pool(struct device *dev, void *start, size_t size);
 
 int
diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c
index 67f060b86a73f..f17aec9d01f0c 100644
--- a/kernel/dma/direct.c
+++ b/kernel/dma/direct.c
@@ -45,7 +45,7 @@ u64 dma_direct_get_required_mask(struct device *dev)
 	return (1ULL << (fls64(max_dma) - 1)) * 2 - 1;
 }
 
-gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 dma_mask,
+static gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 dma_mask,
 				  u64 *phys_limit)
 {
 	u64 dma_limit = min_not_zero(dma_mask, dev->bus_dma_limit);
@@ -70,7 +70,7 @@ gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 dma_mask,
 	return 0;
 }
 
-bool dma_coherent_ok(struct device *dev, phys_addr_t phys, size_t size)
+static bool dma_coherent_ok(struct device *dev, phys_addr_t phys, size_t size)
 {
 	return phys_to_dma_direct(dev, phys) + size - 1 <=
 			min_not_zero(dev->coherent_dma_mask, dev->bus_dma_limit);
@@ -163,8 +163,13 @@ void *dma_direct_alloc_pages(struct device *dev, size_t size,
 	size = PAGE_ALIGN(size);
 
 	if (dma_should_alloc_from_pool(dev, gfp, attrs)) {
-		ret = dma_alloc_from_pool(dev, size, &page, gfp);
-		if (!ret)
+		u64 phys_mask;
+
+		gfp |= dma_direct_optimal_gfp_mask(dev, dev->coherent_dma_mask,
+				&phys_mask);
+		page = dma_alloc_from_pool(dev, size, &ret, gfp,
+				dma_coherent_ok);
+		if (!page)
 			return NULL;
 		goto done;
 	}
diff --git a/kernel/dma/pool.c b/kernel/dma/pool.c
index 6bc74a2d51273..5d071d4a3cbaa 100644
--- a/kernel/dma/pool.c
+++ b/kernel/dma/pool.c
@@ -196,93 +196,75 @@ static int __init dma_atomic_pool_init(void)
 }
 postcore_initcall(dma_atomic_pool_init);
 
-static inline struct gen_pool *dma_guess_pool_from_device(struct device *dev)
+static inline struct gen_pool *dma_guess_pool(struct gen_pool *prev, gfp_t gfp)
 {
-	u64 phys_mask;
-	gfp_t gfp;
-
-	gfp = dma_direct_optimal_gfp_mask(dev, dev->coherent_dma_mask,
-					  &phys_mask);
-	if (IS_ENABLED(CONFIG_ZONE_DMA) && gfp == GFP_DMA)
+	if (prev == NULL) {
+		if (IS_ENABLED(CONFIG_ZONE_DMA32) && (gfp & GFP_DMA32))
+			return atomic_pool_dma32;
+		if (IS_ENABLED(CONFIG_ZONE_DMA) && (gfp & GFP_DMA))
+			return atomic_pool_dma;
+		return atomic_pool_kernel;
+	}
+	if (prev == atomic_pool_kernel)
+		return atomic_pool_dma32 ? atomic_pool_dma32 : atomic_pool_dma;
+	if (prev == atomic_pool_dma32)
 		return atomic_pool_dma;
-	if (IS_ENABLED(CONFIG_ZONE_DMA32) && gfp == GFP_DMA32)
-		return atomic_pool_dma32;
-	return atomic_pool_kernel;
+	return NULL;
 }
 
-static inline struct gen_pool *dma_get_safer_pool(struct gen_pool *bad_pool)
+static struct page *__dma_alloc_from_pool(struct device *dev, size_t size,
+		struct gen_pool *pool, void **cpu_addr,
+		bool (*phys_addr_ok)(struct device *, phys_addr_t, size_t))
 {
-	if (bad_pool == atomic_pool_kernel)
-		return atomic_pool_dma32 ? : atomic_pool_dma;
+	unsigned long addr;
+	phys_addr_t phys;
 
-	if (bad_pool == atomic_pool_dma32)
-		return atomic_pool_dma;
+	addr = gen_pool_alloc(pool, size);
+	if (!addr)
+		return NULL;
 
-	return NULL;
-}
+	phys = gen_pool_virt_to_phys(pool, addr);
+	if (phys_addr_ok && !phys_addr_ok(dev, phys, size)) {
+		gen_pool_free(pool, addr, size);
+		return NULL;
+	}
 
-static inline struct gen_pool *dma_guess_pool(struct device *dev,
-					      struct gen_pool *bad_pool)
-{
-	if (bad_pool)
-		return dma_get_safer_pool(bad_pool);
+	if (gen_pool_avail(pool) < atomic_pool_size)
+		schedule_work(&atomic_pool_work);
 
-	return dma_guess_pool_from_device(dev);
+	*cpu_addr = (void *)addr;
+	memset(*cpu_addr, 0, size);
+	return pfn_to_page(__phys_to_pfn(phys));
 }
 
-void *dma_alloc_from_pool(struct device *dev, size_t size,
-			  struct page **ret_page, gfp_t flags)
+struct page *dma_alloc_from_pool(struct device *dev, size_t size,
+		void **cpu_addr, gfp_t gfp,
+		bool (*phys_addr_ok)(struct device *, phys_addr_t, size_t))
 {
 	struct gen_pool *pool = NULL;
-	unsigned long val = 0;
-	void *ptr = NULL;
-	phys_addr_t phys;
-
-	while (1) {
-		pool = dma_guess_pool(dev, pool);
-		if (!pool) {
-			WARN(1, "Failed to get suitable pool for %s\n",
-			     dev_name(dev));
-			break;
-		}
-
-		val = gen_pool_alloc(pool, size);
-		if (!val)
-			continue;
-
-		phys = gen_pool_virt_to_phys(pool, val);
-		if (dma_coherent_ok(dev, phys, size))
-			break;
-
-		gen_pool_free(pool, val, size);
-		val = 0;
-	}
-
-
-	if (val) {
-		*ret_page = pfn_to_page(__phys_to_pfn(phys));
-		ptr = (void *)val;
-		memset(ptr, 0, size);
+	struct page *page;
 
-		if (gen_pool_avail(pool) < atomic_pool_size)
-			schedule_work(&atomic_pool_work);
+	while ((pool = dma_guess_pool(pool, gfp))) {
+		page = __dma_alloc_from_pool(dev, size, pool, cpu_addr,
+					     phys_addr_ok);
+		if (page)
+			return page;
 	}
 
-	return ptr;
+	WARN(1, "Failed to get suitable pool for %s\n", dev_name(dev));
+	return NULL;
 }
 
 bool dma_free_from_pool(struct device *dev, void *start, size_t size)
 {
 	struct gen_pool *pool = NULL;
 
-	while (1) {
-		pool = dma_guess_pool(dev, pool);
-		if (!pool)
-			return false;
-
-		if (gen_pool_has_addr(pool, (unsigned long)start, size)) {
-			gen_pool_free(pool, (unsigned long)start, size);
-			return true;
-		}
+	while ((pool = dma_guess_pool(pool, 0))) {
+		if (!gen_pool_has_addr(pool, (unsigned long)start, size))
+			continue;
+		gen_pool_free(pool, (unsigned long)start, size);
+		return true;
 	}
+
+	return false;
 }
-- 
2.25.1

[PATCH AUTOSEL 5.8 30/63] dma-pool: fix coherent pool allocations for IOMMU mappings

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 9420139f516d7fbc248ce17f35275cb005ed98ea ]

When allocating coherent pool memory for an IOMMU mapping we don't care
about the DMA mask.  Move the guess for the initial GFP mask into the
dma_direct_alloc_pages and pass dma_coherent_ok as a function pointer
argument so that it doesn't get applied to the IOMMU case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/dma-iommu.c   |   4 +-
 include/linux/dma-direct.h  |   3 -
 include/linux/dma-mapping.h |   5 +-
 kernel/dma/direct.c         |  13 ++--
 kernel/dma/pool.c           | 114 +++++++++++++++---------------------
 5 files changed, 62 insertions(+), 77 deletions(-)

diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
index 4959f5df21bd0..5141d49a046ba 100644
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -1035,8 +1035,8 @@ static void *iommu_dma_alloc(struct device *dev, size_t size,
 
 	if (IS_ENABLED(CONFIG_DMA_DIRECT_REMAP) &&
 	    !gfpflags_allow_blocking(gfp) && !coherent)
-		cpu_addr = dma_alloc_from_pool(dev, PAGE_ALIGN(size), &page,
-					       gfp);
+		page = dma_alloc_from_pool(dev, PAGE_ALIGN(size), &cpu_addr,
+					       gfp, NULL);
 	else
 		cpu_addr = iommu_dma_alloc_pages(dev, size, &page, gfp, attrs);
 	if (!cpu_addr)
diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
index ab2e20cba9514..ba22952c24e24 100644
--- a/include/linux/dma-direct.h
+++ b/include/linux/dma-direct.h
@@ -67,9 +67,6 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size,
 }
 
 u64 dma_direct_get_required_mask(struct device *dev);
-gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 dma_mask,
-				  u64 *phys_mask);
-bool dma_coherent_ok(struct device *dev, phys_addr_t phys, size_t size);
 void *dma_direct_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
 		gfp_t gfp, unsigned long attrs);
 void dma_direct_free(struct device *dev, size_t size, void *cpu_addr,
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index a33ed3954ed46..0dc08701d7b7e 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -715,8 +715,9 @@ void *dma_common_pages_remap(struct page **pages, size_t size,
 			pgprot_t prot, const void *caller);
 void dma_common_free_remap(void *cpu_addr, size_t size);
 
-void *dma_alloc_from_pool(struct device *dev, size_t size,
-			  struct page **ret_page, gfp_t flags);
+struct page *dma_alloc_from_pool(struct device *dev, size_t size,
+		void **cpu_addr, gfp_t flags,
+		bool (*phys_addr_ok)(struct device *, phys_addr_t, size_t));
 bool dma_free_from_pool(struct device *dev, void *start, size_t size);
 
 int
diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c
index 67f060b86a73f..f17aec9d01f0c 100644
--- a/kernel/dma/direct.c
+++ b/kernel/dma/direct.c
@@ -45,7 +45,7 @@ u64 dma_direct_get_required_mask(struct device *dev)
 	return (1ULL << (fls64(max_dma) - 1)) * 2 - 1;
 }
 
-gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 dma_mask,
+static gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 dma_mask,
 				  u64 *phys_limit)
 {
 	u64 dma_limit = min_not_zero(dma_mask, dev->bus_dma_limit);
@@ -70,7 +70,7 @@ gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 dma_mask,
 	return 0;
 }
 
-bool dma_coherent_ok(struct device *dev, phys_addr_t phys, size_t size)
+static bool dma_coherent_ok(struct device *dev, phys_addr_t phys, size_t size)
 {
 	return phys_to_dma_direct(dev, phys) + size - 1 <=
 			min_not_zero(dev->coherent_dma_mask, dev->bus_dma_limit);
@@ -163,8 +163,13 @@ void *dma_direct_alloc_pages(struct device *dev, size_t size,
 	size = PAGE_ALIGN(size);
 
 	if (dma_should_alloc_from_pool(dev, gfp, attrs)) {
-		ret = dma_alloc_from_pool(dev, size, &page, gfp);
-		if (!ret)
+		u64 phys_mask;
+
+		gfp |= dma_direct_optimal_gfp_mask(dev, dev->coherent_dma_mask,
+				&phys_mask);
+		page = dma_alloc_from_pool(dev, size, &ret, gfp,
+				dma_coherent_ok);
+		if (!page)
 			return NULL;
 		goto done;
 	}
diff --git a/kernel/dma/pool.c b/kernel/dma/pool.c
index 6bc74a2d51273..5d071d4a3cbaa 100644
--- a/kernel/dma/pool.c
+++ b/kernel/dma/pool.c
@@ -196,93 +196,75 @@ static int __init dma_atomic_pool_init(void)
 }
 postcore_initcall(dma_atomic_pool_init);
 
-static inline struct gen_pool *dma_guess_pool_from_device(struct device *dev)
+static inline struct gen_pool *dma_guess_pool(struct gen_pool *prev, gfp_t gfp)
 {
-	u64 phys_mask;
-	gfp_t gfp;
-
-	gfp = dma_direct_optimal_gfp_mask(dev, dev->coherent_dma_mask,
-					  &phys_mask);
-	if (IS_ENABLED(CONFIG_ZONE_DMA) && gfp == GFP_DMA)
+	if (prev == NULL) {
+		if (IS_ENABLED(CONFIG_ZONE_DMA32) && (gfp & GFP_DMA32))
+			return atomic_pool_dma32;
+		if (IS_ENABLED(CONFIG_ZONE_DMA) && (gfp & GFP_DMA))
+			return atomic_pool_dma;
+		return atomic_pool_kernel;
+	}
+	if (prev == atomic_pool_kernel)
+		return atomic_pool_dma32 ? atomic_pool_dma32 : atomic_pool_dma;
+	if (prev == atomic_pool_dma32)
 		return atomic_pool_dma;
-	if (IS_ENABLED(CONFIG_ZONE_DMA32) && gfp == GFP_DMA32)
-		return atomic_pool_dma32;
-	return atomic_pool_kernel;
+	return NULL;
 }
 
-static inline struct gen_pool *dma_get_safer_pool(struct gen_pool *bad_pool)
+static struct page *__dma_alloc_from_pool(struct device *dev, size_t size,
+		struct gen_pool *pool, void **cpu_addr,
+		bool (*phys_addr_ok)(struct device *, phys_addr_t, size_t))
 {
-	if (bad_pool == atomic_pool_kernel)
-		return atomic_pool_dma32 ? : atomic_pool_dma;
+	unsigned long addr;
+	phys_addr_t phys;
 
-	if (bad_pool == atomic_pool_dma32)
-		return atomic_pool_dma;
+	addr = gen_pool_alloc(pool, size);
+	if (!addr)
+		return NULL;
 
-	return NULL;
-}
+	phys = gen_pool_virt_to_phys(pool, addr);
+	if (phys_addr_ok && !phys_addr_ok(dev, phys, size)) {
+		gen_pool_free(pool, addr, size);
+		return NULL;
+	}
 
-static inline struct gen_pool *dma_guess_pool(struct device *dev,
-					      struct gen_pool *bad_pool)
-{
-	if (bad_pool)
-		return dma_get_safer_pool(bad_pool);
+	if (gen_pool_avail(pool) < atomic_pool_size)
+		schedule_work(&atomic_pool_work);
 
-	return dma_guess_pool_from_device(dev);
+	*cpu_addr = (void *)addr;
+	memset(*cpu_addr, 0, size);
+	return pfn_to_page(__phys_to_pfn(phys));
 }
 
-void *dma_alloc_from_pool(struct device *dev, size_t size,
-			  struct page **ret_page, gfp_t flags)
+struct page *dma_alloc_from_pool(struct device *dev, size_t size,
+		void **cpu_addr, gfp_t gfp,
+		bool (*phys_addr_ok)(struct device *, phys_addr_t, size_t))
 {
 	struct gen_pool *pool = NULL;
-	unsigned long val = 0;
-	void *ptr = NULL;
-	phys_addr_t phys;
-
-	while (1) {
-		pool = dma_guess_pool(dev, pool);
-		if (!pool) {
-			WARN(1, "Failed to get suitable pool for %s\n",
-			     dev_name(dev));
-			break;
-		}
-
-		val = gen_pool_alloc(pool, size);
-		if (!val)
-			continue;
-
-		phys = gen_pool_virt_to_phys(pool, val);
-		if (dma_coherent_ok(dev, phys, size))
-			break;
-
-		gen_pool_free(pool, val, size);
-		val = 0;
-	}
-
-
-	if (val) {
-		*ret_page = pfn_to_page(__phys_to_pfn(phys));
-		ptr = (void *)val;
-		memset(ptr, 0, size);
+	struct page *page;
 
-		if (gen_pool_avail(pool) < atomic_pool_size)
-			schedule_work(&atomic_pool_work);
+	while ((pool = dma_guess_pool(pool, gfp))) {
+		page = __dma_alloc_from_pool(dev, size, pool, cpu_addr,
+					     phys_addr_ok);
+		if (page)
+			return page;
 	}
 
-	return ptr;
+	WARN(1, "Failed to get suitable pool for %s\n", dev_name(dev));
+	return NULL;
 }
 
 bool dma_free_from_pool(struct device *dev, void *start, size_t size)
 {
 	struct gen_pool *pool = NULL;
 
-	while (1) {
-		pool = dma_guess_pool(dev, pool);
-		if (!pool)
-			return false;
-
-		if (gen_pool_has_addr(pool, (unsigned long)start, size)) {
-			gen_pool_free(pool, (unsigned long)start, size);
-			return true;
-		}
+	while ((pool = dma_guess_pool(pool, 0))) {
+		if (!gen_pool_has_addr(pool, (unsigned long)start, size))
+			continue;
+		gen_pool_free(pool, (unsigned long)start, size);
+		return true;
 	}
+
+	return false;
 }
-- 
2.25.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH AUTOSEL 5.8 31/63] dma-pool: Only allocate from CMA when in same memory zone

[Sasha Levin]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

[ Upstream commit d7e673ec2c8e0ea39c4c70fc490d67d7fbda869d ]

There is no guarantee to CMA's placement, so allocating a zone specific
atomic pool from CMA might return memory from a completely different
memory zone. To get around this double check CMA's placement before
allocating from it.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/dma/pool.c | 31 ++++++++++++++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)

diff --git a/kernel/dma/pool.c b/kernel/dma/pool.c
index 5d071d4a3cbaa..06582b488e317 100644
--- a/kernel/dma/pool.c
+++ b/kernel/dma/pool.c
@@ -3,7 +3,9 @@
  * Copyright (C) 2012 ARM Ltd.
  * Copyright (C) 2020 Google LLC
  */
+#include <linux/cma.h>
 #include <linux/debugfs.h>
+#include <linux/dma-contiguous.h>
 #include <linux/dma-direct.h>
 #include <linux/dma-noncoherent.h>
 #include <linux/init.h>
@@ -55,6 +57,29 @@ static void dma_atomic_pool_size_add(gfp_t gfp, size_t size)
 		pool_size_kernel += size;
 }
 
+static bool cma_in_zone(gfp_t gfp)
+{
+	unsigned long size;
+	phys_addr_t end;
+	struct cma *cma;
+
+	cma = dev_get_cma_area(NULL);
+	if (!cma)
+		return false;
+
+	size = cma_get_size(cma);
+	if (!size)
+		return false;
+
+	/* CMA can't cross zone boundaries, see cma_activate_area() */
+	end = cma_get_base(cma) + size - 1;
+	if (IS_ENABLED(CONFIG_ZONE_DMA) && (gfp & GFP_DMA))
+		return end <= DMA_BIT_MASK(zone_dma_bits);
+	if (IS_ENABLED(CONFIG_ZONE_DMA32) && (gfp & GFP_DMA32))
+		return end <= DMA_BIT_MASK(32);
+	return true;
+}
+
 static int atomic_pool_expand(struct gen_pool *pool, size_t pool_size,
 			      gfp_t gfp)
 {
@@ -68,7 +93,11 @@ static int atomic_pool_expand(struct gen_pool *pool, size_t pool_size,
 
 	do {
 		pool_size = 1 << (PAGE_SHIFT + order);
-		page = alloc_pages(gfp, order);
+		if (cma_in_zone(gfp))
+			page = dma_alloc_from_contiguous(NULL, 1 << order,
+							 order, false);
+		if (!page)
+			page = alloc_pages(gfp, order);
 	} while (!page && order-- > 0);
 	if (!page)
 		goto out;
-- 
2.25.1

[PATCH AUTOSEL 5.8 31/63] dma-pool: Only allocate from CMA when in same memory zone

[Sasha Levin]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

[ Upstream commit d7e673ec2c8e0ea39c4c70fc490d67d7fbda869d ]

There is no guarantee to CMA's placement, so allocating a zone specific
atomic pool from CMA might return memory from a completely different
memory zone. To get around this double check CMA's placement before
allocating from it.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/dma/pool.c | 31 ++++++++++++++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)

diff --git a/kernel/dma/pool.c b/kernel/dma/pool.c
index 5d071d4a3cbaa..06582b488e317 100644
--- a/kernel/dma/pool.c
+++ b/kernel/dma/pool.c
@@ -3,7 +3,9 @@
  * Copyright (C) 2012 ARM Ltd.
  * Copyright (C) 2020 Google LLC
  */
+#include <linux/cma.h>
 #include <linux/debugfs.h>
+#include <linux/dma-contiguous.h>
 #include <linux/dma-direct.h>
 #include <linux/dma-noncoherent.h>
 #include <linux/init.h>
@@ -55,6 +57,29 @@ static void dma_atomic_pool_size_add(gfp_t gfp, size_t size)
 		pool_size_kernel += size;
 }
 
+static bool cma_in_zone(gfp_t gfp)
+{
+	unsigned long size;
+	phys_addr_t end;
+	struct cma *cma;
+
+	cma = dev_get_cma_area(NULL);
+	if (!cma)
+		return false;
+
+	size = cma_get_size(cma);
+	if (!size)
+		return false;
+
+	/* CMA can't cross zone boundaries, see cma_activate_area() */
+	end = cma_get_base(cma) + size - 1;
+	if (IS_ENABLED(CONFIG_ZONE_DMA) && (gfp & GFP_DMA))
+		return end <= DMA_BIT_MASK(zone_dma_bits);
+	if (IS_ENABLED(CONFIG_ZONE_DMA32) && (gfp & GFP_DMA32))
+		return end <= DMA_BIT_MASK(32);
+	return true;
+}
+
 static int atomic_pool_expand(struct gen_pool *pool, size_t pool_size,
 			      gfp_t gfp)
 {
@@ -68,7 +93,11 @@ static int atomic_pool_expand(struct gen_pool *pool, size_t pool_size,
 
 	do {
 		pool_size = 1 << (PAGE_SHIFT + order);
-		page = alloc_pages(gfp, order);
+		if (cma_in_zone(gfp))
+			page = dma_alloc_from_contiguous(NULL, 1 << order,
+							 order, false);
+		if (!page)
+			page = alloc_pages(gfp, order);
 	} while (!page && order-- > 0);
 	if (!page)
 		goto out;
-- 
2.25.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH AUTOSEL 5.8 32/63] drivers/net/wan/hdlc_x25: Added needed_headroom and a skb->len check

[Sasha Levin]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 77b981c82c1df7c7ad32a046f17f007450b46954 ]

1. Added a skb->len check

This driver expects upper layers to include a pseudo header of 1 byte
when passing down a skb for transmission. This driver will read this
1-byte header. This patch added a skb->len check before reading the
header to make sure the header exists.

2. Added needed_headroom and set hard_header_len to 0

When this driver transmits data,
  first this driver will remove a pseudo header of 1 byte,
  then the lapb module will prepend the LAPB header of 2 or 3 bytes.
So the value of needed_headroom in this driver should be 3 - 1.

Because this driver has no header_ops, according to the logic of
af_packet.c, the value of hard_header_len should be 0.

Reason of setting needed_headroom and hard_header_len at this place:

This driver is written using the API of the hdlc module, the hdlc
module enables this driver (the protocol driver) to run on any hardware
that has a driver (the hardware driver) written using the API of the
hdlc module.

Two other hdlc protocol drivers - hdlc_ppp and hdlc_raw_eth, also set
things like hard_header_len at this place. In hdlc_ppp, it sets
hard_header_len after attach_hdlc_protocol and before setting dev->type.
In hdlc_raw_eth, it sets hard_header_len by calling ether_setup after
attach_hdlc_protocol and after memcpy the settings.

3. Reset needed_headroom when detaching protocols (in hdlc.c)

When detaching a protocol from a hardware device, the hdlc module will
reset various parameters of the device (including hard_header_len) to
the default values. We add needed_headroom here so that needed_headroom
will also be reset.

Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Cc: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/hdlc.c     |  1 +
 drivers/net/wan/hdlc_x25.c | 17 ++++++++++++++++-
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c
index dfc16770458d8..386ed2aa31fd9 100644
--- a/drivers/net/wan/hdlc.c
+++ b/drivers/net/wan/hdlc.c
@@ -230,6 +230,7 @@ static void hdlc_setup_dev(struct net_device *dev)
 	dev->max_mtu		 = HDLC_MAX_MTU;
 	dev->type		 = ARPHRD_RAWHDLC;
 	dev->hard_header_len	 = 16;
+	dev->needed_headroom	 = 0;
 	dev->addr_len		 = 0;
 	dev->header_ops		 = &hdlc_null_ops;
 }
diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c
index f70336bb6f524..f52b9fed05931 100644
--- a/drivers/net/wan/hdlc_x25.c
+++ b/drivers/net/wan/hdlc_x25.c
@@ -107,8 +107,14 @@ static netdev_tx_t x25_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	int result;
 
+	/* There should be a pseudo header of 1 byte added by upper layers.
+	 * Check to make sure it is there before reading it.
+	 */
+	if (skb->len < 1) {
+		kfree_skb(skb);
+		return NETDEV_TX_OK;
+	}
 
-	/* X.25 to LAPB */
 	switch (skb->data[0]) {
 	case X25_IFACE_DATA:	/* Data to be transmitted */
 		skb_pull(skb, 1);
@@ -294,6 +300,15 @@ static int x25_ioctl(struct net_device *dev, struct ifreq *ifr)
 			return result;
 
 		memcpy(&state(hdlc)->settings, &new_settings, size);
+
+		/* There's no header_ops so hard_header_len should be 0. */
+		dev->hard_header_len = 0;
+		/* When transmitting data:
+		 * first we'll remove a pseudo header of 1 byte,
+		 * then we'll prepend an LAPB header of at most 3 bytes.
+		 */
+		dev->needed_headroom = 3 - 1;
+
 		dev->type = ARPHRD_X25;
 		call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev);
 		netif_dormant_off(dev);
-- 
2.25.1

[PATCH AUTOSEL 5.8 33/63] ALSA: hda/realtek: Add model alc298-samsung-headphone

[Sasha Levin]

From: Mike Pozulp <pozulp.kernel@gmail.com>

[ Upstream commit 23dc958689449be85e39351a8c809c3d344b155b ]

The very quiet and distorted headphone output bug that afflicted my
Samsung Notebook 9 is appearing in many other Samsung laptops. Expose
the quirk which fixed my laptop as a model so other users can try it.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207423
Signed-off-by: Mike Pozulp <pozulp.kernel@gmail.com>
Link: https://lore.kernel.org/r/20200817043219.458889-1-pozulp.kernel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 8626e59f1e6a9..ce9cf6013e9d3 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7956,6 +7956,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = {
 	{.id = ALC299_FIXUP_PREDATOR_SPK, .name = "predator-spk"},
 	{.id = ALC298_FIXUP_HUAWEI_MBX_STEREO, .name = "huawei-mbx-stereo"},
 	{.id = ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE, .name = "alc256-medion-headset"},
+	{.id = ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc298-samsung-headphone"},
 	{}
 };
 #define ALC225_STANDARD_PINS \
-- 
2.25.1

[PATCH AUTOSEL 5.8 33/63] ALSA: hda/realtek: Add model alc298-samsung-headphone

[Sasha Levin]

From: Mike Pozulp <pozulp.kernel@gmail.com>

[ Upstream commit 23dc958689449be85e39351a8c809c3d344b155b ]

The very quiet and distorted headphone output bug that afflicted my
Samsung Notebook 9 is appearing in many other Samsung laptops. Expose
the quirk which fixed my laptop as a model so other users can try it.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207423
Signed-off-by: Mike Pozulp <pozulp.kernel@gmail.com>
Link: https://lore.kernel.org/r/20200817043219.458889-1-pozulp.kernel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 8626e59f1e6a9..ce9cf6013e9d3 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7956,6 +7956,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = {
 	{.id = ALC299_FIXUP_PREDATOR_SPK, .name = "predator-spk"},
 	{.id = ALC298_FIXUP_HUAWEI_MBX_STEREO, .name = "huawei-mbx-stereo"},
 	{.id = ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE, .name = "alc256-medion-headset"},
+	{.id = ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc298-samsung-headphone"},
 	{}
 };
 #define ALC225_STANDARD_PINS \
-- 
2.25.1

[PATCH AUTOSEL 5.8 34/63] s390/cio: add cond_resched() in the slow_eval_known_fn() loop

[Sasha Levin]

From: Vineeth Vijayan <vneethv@linux.ibm.com>

[ Upstream commit 0b8eb2ee9da1e8c9b8082f404f3948aa82a057b2 ]

The scanning through subchannels during the time of an event could
take significant amount of time in case of platforms with lots of
known subchannels. This might result in higher scheduling latencies
for other tasks especially on systems with a single CPU. Add
cond_resched() call, as the loop in slow_eval_known_fn() can be
executed for a longer duration.

Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/cio/css.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 94edbb33d0d1f..aca022239b333 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -677,6 +677,11 @@ static int slow_eval_known_fn(struct subchannel *sch, void *data)
 		rc = css_evaluate_known_subchannel(sch, 1);
 		if (rc == -EAGAIN)
 			css_schedule_eval(sch->schid);
+		/*
+		 * The loop might take long time for platforms with lots of
+		 * known devices. Allow scheduling here.
+		 */
+		cond_resched();
 	}
 	return 0;
 }
-- 
2.25.1

[PATCH AUTOSEL 5.8 35/63] ASoC: wm8994: Avoid attempts to read unreadable registers

[Sasha Levin]

From: Sylwester Nawrocki <s.nawrocki@samsung.com>

[ Upstream commit f082bb59b72039a2326ec1a44496899fb8aa6d0e ]

The driver supports WM1811, WM8994, WM8958 devices but according to
documentation and the regmap definitions the WM8958_DSP2_* registers
are only available on WM8958. In current code these registers are
being accessed as if they were available on all the three chips.

When starting playback on WM1811 CODEC multiple errors like:
"wm8994-codec wm8994-codec: ASoC: error at soc_component_read_no_lock on wm8994-codec: -5"
can be seen, which is caused by attempts to read an unavailable
WM8958_DSP2_PROGRAM register. The issue has been uncovered by recent
commit "e2329ee ASoC: soc-component: add soc_component_err()".

This patch adds a check in wm8958_aif_ev() callback so the DSP2 handling
is only done for WM8958.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200731173834.23832-1-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8958-dsp2.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/soc/codecs/wm8958-dsp2.c b/sound/soc/codecs/wm8958-dsp2.c
index ca42445b649d4..b471892d84778 100644
--- a/sound/soc/codecs/wm8958-dsp2.c
+++ b/sound/soc/codecs/wm8958-dsp2.c
@@ -412,8 +412,12 @@ int wm8958_aif_ev(struct snd_soc_dapm_widget *w,
 		  struct snd_kcontrol *kcontrol, int event)
 {
 	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+	struct wm8994 *control = dev_get_drvdata(component->dev->parent);
 	int i;
 
+	if (control->type != WM8958)
+		return 0;
+
 	switch (event) {
 	case SND_SOC_DAPM_POST_PMU:
 	case SND_SOC_DAPM_PRE_PMU:
-- 
2.25.1

[PATCH AUTOSEL 5.8 35/63] ASoC: wm8994: Avoid attempts to read unreadable registers

[Sasha Levin]

From: Sylwester Nawrocki <s.nawrocki@samsung.com>

[ Upstream commit f082bb59b72039a2326ec1a44496899fb8aa6d0e ]

The driver supports WM1811, WM8994, WM8958 devices but according to
documentation and the regmap definitions the WM8958_DSP2_* registers
are only available on WM8958. In current code these registers are
being accessed as if they were available on all the three chips.

When starting playback on WM1811 CODEC multiple errors like:
"wm8994-codec wm8994-codec: ASoC: error at soc_component_read_no_lock on wm8994-codec: -5"
can be seen, which is caused by attempts to read an unavailable
WM8958_DSP2_PROGRAM register. The issue has been uncovered by recent
commit "e2329ee ASoC: soc-component: add soc_component_err()".

This patch adds a check in wm8958_aif_ev() callback so the DSP2 handling
is only done for WM8958.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200731173834.23832-1-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8958-dsp2.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/soc/codecs/wm8958-dsp2.c b/sound/soc/codecs/wm8958-dsp2.c
index ca42445b649d4..b471892d84778 100644
--- a/sound/soc/codecs/wm8958-dsp2.c
+++ b/sound/soc/codecs/wm8958-dsp2.c
@@ -412,8 +412,12 @@ int wm8958_aif_ev(struct snd_soc_dapm_widget *w,
 		  struct snd_kcontrol *kcontrol, int event)
 {
 	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+	struct wm8994 *control = dev_get_drvdata(component->dev->parent);
 	int i;
 
+	if (control->type != WM8958)
+		return 0;
+
 	switch (event) {
 	case SND_SOC_DAPM_POST_PMU:
 	case SND_SOC_DAPM_PRE_PMU:
-- 
2.25.1

[PATCH AUTOSEL 5.8 36/63] ALSA: usb-audio: ignore broken processing/extension unit

[Sasha Levin]

From: Tom Yan <tom.ty89@gmail.com>

[ Upstream commit d8d0db7bb358ef65d60726a61bfcd08eccff0bc0 ]

Some devices have broken extension unit where getting current value
doesn't work. Attempt that once when creating mixer control for it. If
it fails, just ignore it, so that it won't cripple the device entirely
(and/or make the error floods).

Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Link: https://lore.kernel.org/r/5f3abc52.1c69fb81.9cf2.fe91@mx.google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/mixer.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index eab0fd4fd7c33..e0b7174c10430 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -2367,7 +2367,7 @@ static int build_audio_procunit(struct mixer_build *state, int unitid,
 	int num_ins;
 	struct usb_mixer_elem_info *cval;
 	struct snd_kcontrol *kctl;
-	int i, err, nameid, type, len;
+	int i, err, nameid, type, len, val;
 	const struct procunit_info *info;
 	const struct procunit_value_info *valinfo;
 	const struct usbmix_name_map *map;
@@ -2470,6 +2470,12 @@ static int build_audio_procunit(struct mixer_build *state, int unitid,
 			break;
 		}
 
+		err = get_cur_ctl_value(cval, cval->control << 8, &val);
+		if (err < 0) {
+			usb_mixer_elem_info_free(cval);
+			return -EINVAL;
+		}
+
 		kctl = snd_ctl_new1(&mixer_procunit_ctl, cval);
 		if (!kctl) {
 			usb_mixer_elem_info_free(cval);
-- 
2.25.1

[PATCH AUTOSEL 5.8 36/63] ALSA: usb-audio: ignore broken processing/extension unit

[Sasha Levin]

From: Tom Yan <tom.ty89@gmail.com>

[ Upstream commit d8d0db7bb358ef65d60726a61bfcd08eccff0bc0 ]

Some devices have broken extension unit where getting current value
doesn't work. Attempt that once when creating mixer control for it. If
it fails, just ignore it, so that it won't cripple the device entirely
(and/or make the error floods).

Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Link: https://lore.kernel.org/r/5f3abc52.1c69fb81.9cf2.fe91@mx.google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/mixer.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index eab0fd4fd7c33..e0b7174c10430 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -2367,7 +2367,7 @@ static int build_audio_procunit(struct mixer_build *state, int unitid,
 	int num_ins;
 	struct usb_mixer_elem_info *cval;
 	struct snd_kcontrol *kctl;
-	int i, err, nameid, type, len;
+	int i, err, nameid, type, len, val;
 	const struct procunit_info *info;
 	const struct procunit_value_info *valinfo;
 	const struct usbmix_name_map *map;
@@ -2470,6 +2470,12 @@ static int build_audio_procunit(struct mixer_build *state, int unitid,
 			break;
 		}
 
+		err = get_cur_ctl_value(cval, cval->control << 8, &val);
+		if (err < 0) {
+			usb_mixer_elem_info_free(cval);
+			return -EINVAL;
+		}
+
 		kctl = snd_ctl_new1(&mixer_procunit_ctl, cval);
 		if (!kctl) {
 			usb_mixer_elem_info_free(cval);
-- 
2.25.1

[PATCH AUTOSEL 5.8 37/63] selftests: disable rp_filter for icmp_redirect.sh

[Sasha Levin]

From: David Ahern <dsahern@kernel.org>

[ Upstream commit bcf7ddb0186d366f761f86196b480ea6dd2dc18c ]

h1 is initially configured to reach h2 via r1 rather than the
more direct path through r2. If rp_filter is set and inherited
for r2, forwarding fails since the source address of h1 is
reachable from eth0 vs the packet coming to it via r1 and eth1.
Since rp_filter setting affects the test, explicitly reset it.

Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/icmp_redirect.sh | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/tools/testing/selftests/net/icmp_redirect.sh b/tools/testing/selftests/net/icmp_redirect.sh
index 18c5de53558af..bf361f30d6ef9 100755
--- a/tools/testing/selftests/net/icmp_redirect.sh
+++ b/tools/testing/selftests/net/icmp_redirect.sh
@@ -180,6 +180,8 @@ setup()
 			;;
 		r[12]) ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1
 		       ip netns exec $ns sysctl -q -w net.ipv4.conf.all.send_redirects=1
+		       ip netns exec $ns sysctl -q -w net.ipv4.conf.default.rp_filter=0
+		       ip netns exec $ns sysctl -q -w net.ipv4.conf.all.rp_filter=0
 
 		       ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1
 		       ip netns exec $ns sysctl -q -w net.ipv6.route.mtu_expires=10
-- 
2.25.1

[PATCH AUTOSEL 5.8 38/63] scsi: fcoe: Fix I/O path allocation

[Sasha Levin]

From: Mike Christie <michael.christie@oracle.com>

[ Upstream commit fa39ab5184d64563cd36f2fb5f0d3fbad83a432c ]

ixgbe_fcoe_ddp_setup() can be called from the main I/O path and is called
with a spin_lock held, so we have to use GFP_ATOMIC allocation instead of
GFP_KERNEL.

Link: https://lore.kernel.org/r/1596831813-9839-1-git-send-email-michael.christie@oracle.com
cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
index ec7a11d13fdc0..9e70b9a674409 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
@@ -192,7 +192,7 @@ static int ixgbe_fcoe_ddp_setup(struct net_device *netdev, u16 xid,
 	}
 
 	/* alloc the udl from per cpu ddp pool */
-	ddp->udl = dma_pool_alloc(ddp_pool->pool, GFP_KERNEL, &ddp->udp);
+	ddp->udl = dma_pool_alloc(ddp_pool->pool, GFP_ATOMIC, &ddp->udp);
 	if (!ddp->udl) {
 		e_err(drv, "failed allocated ddp context\n");
 		goto out_noddp_unmap;
-- 
2.25.1

[Intel-wired-lan] [PATCH AUTOSEL 5.8 38/63] scsi: fcoe: Fix I/O path allocation

[Sasha Levin]

From: Mike Christie <michael.christie@oracle.com>

[ Upstream commit fa39ab5184d64563cd36f2fb5f0d3fbad83a432c ]

ixgbe_fcoe_ddp_setup() can be called from the main I/O path and is called
with a spin_lock held, so we have to use GFP_ATOMIC allocation instead of
GFP_KERNEL.

Link: https://lore.kernel.org/r/1596831813-9839-1-git-send-email-michael.christie at oracle.com
cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
index ec7a11d13fdc0..9e70b9a674409 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
@@ -192,7 +192,7 @@ static int ixgbe_fcoe_ddp_setup(struct net_device *netdev, u16 xid,
 	}
 
 	/* alloc the udl from per cpu ddp pool */
-	ddp->udl = dma_pool_alloc(ddp_pool->pool, GFP_KERNEL, &ddp->udp);
+	ddp->udl = dma_pool_alloc(ddp_pool->pool, GFP_ATOMIC, &ddp->udp);
 	if (!ddp->udl) {
 		e_err(drv, "failed allocated ddp context\n");
 		goto out_noddp_unmap;
-- 
2.25.1

[PATCH AUTOSEL 5.8 39/63] scsi: ufs: Fix possible infinite loop in ufshcd_hold

[Sasha Levin]

From: Stanley Chu <stanley.chu@mediatek.com>

[ Upstream commit 93b6c5db06028a3b55122bbb74d0715dd8ca4ae0 ]

In ufshcd_suspend(), after clk-gating is suspended and link is set
as Hibern8 state, ufshcd_hold() is still possibly invoked before
ufshcd_suspend() returns. For example, MediaTek's suspend vops may
issue UIC commands which would call ufshcd_hold() during the command
issuing flow.

Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled,
then ufshcd_hold() may enter infinite loops because there is no
clk-ungating work scheduled or pending. In this case, ufshcd_hold()
shall just bypass, and keep the link as Hibern8 state.

Link: https://lore.kernel.org/r/20200809050734.18740-1-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Co-developed-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index e412e43d23821..8185ab3b41c9b 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1557,6 +1557,7 @@ static void ufshcd_ungate_work(struct work_struct *work)
 int ufshcd_hold(struct ufs_hba *hba, bool async)
 {
 	int rc = 0;
+	bool flush_result;
 	unsigned long flags;
 
 	if (!ufshcd_is_clkgating_allowed(hba))
@@ -1588,7 +1589,9 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
 				break;
 			}
 			spin_unlock_irqrestore(hba->host->host_lock, flags);
-			flush_work(&hba->clk_gating.ungate_work);
+			flush_result = flush_work(&hba->clk_gating.ungate_work);
+			if (hba->clk_gating.is_suspended && !flush_result)
+				goto out;
 			spin_lock_irqsave(hba->host->host_lock, flags);
 			goto start;
 		}
-- 
2.25.1

[PATCH AUTOSEL 5.8 39/63] scsi: ufs: Fix possible infinite loop in ufshcd_hold

[Sasha Levin]

From: Stanley Chu <stanley.chu@mediatek.com>

[ Upstream commit 93b6c5db06028a3b55122bbb74d0715dd8ca4ae0 ]

In ufshcd_suspend(), after clk-gating is suspended and link is set
as Hibern8 state, ufshcd_hold() is still possibly invoked before
ufshcd_suspend() returns. For example, MediaTek's suspend vops may
issue UIC commands which would call ufshcd_hold() during the command
issuing flow.

Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled,
then ufshcd_hold() may enter infinite loops because there is no
clk-ungating work scheduled or pending. In this case, ufshcd_hold()
shall just bypass, and keep the link as Hibern8 state.

Link: https://lore.kernel.org/r/20200809050734.18740-1-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Co-developed-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index e412e43d23821..8185ab3b41c9b 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1557,6 +1557,7 @@ static void ufshcd_ungate_work(struct work_struct *work)
 int ufshcd_hold(struct ufs_hba *hba, bool async)
 {
 	int rc = 0;
+	bool flush_result;
 	unsigned long flags;
 
 	if (!ufshcd_is_clkgating_allowed(hba))
@@ -1588,7 +1589,9 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
 				break;
 			}
 			spin_unlock_irqrestore(hba->host->host_lock, flags);
-			flush_work(&hba->clk_gating.ungate_work);
+			flush_result = flush_work(&hba->clk_gating.ungate_work);
+			if (hba->clk_gating.is_suspended && !flush_result)
+				goto out;
 			spin_lock_irqsave(hba->host->host_lock, flags);
 			goto start;
 		}
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.8 39/63] scsi: ufs: Fix possible infinite loop in ufshcd_hold

[Sasha Levin]

From: Stanley Chu <stanley.chu@mediatek.com>

[ Upstream commit 93b6c5db06028a3b55122bbb74d0715dd8ca4ae0 ]

In ufshcd_suspend(), after clk-gating is suspended and link is set
as Hibern8 state, ufshcd_hold() is still possibly invoked before
ufshcd_suspend() returns. For example, MediaTek's suspend vops may
issue UIC commands which would call ufshcd_hold() during the command
issuing flow.

Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled,
then ufshcd_hold() may enter infinite loops because there is no
clk-ungating work scheduled or pending. In this case, ufshcd_hold()
shall just bypass, and keep the link as Hibern8 state.

Link: https://lore.kernel.org/r/20200809050734.18740-1-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Co-developed-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index e412e43d23821..8185ab3b41c9b 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1557,6 +1557,7 @@ static void ufshcd_ungate_work(struct work_struct *work)
 int ufshcd_hold(struct ufs_hba *hba, bool async)
 {
 	int rc = 0;
+	bool flush_result;
 	unsigned long flags;
 
 	if (!ufshcd_is_clkgating_allowed(hba))
@@ -1588,7 +1589,9 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
 				break;
 			}
 			spin_unlock_irqrestore(hba->host->host_lock, flags);
-			flush_work(&hba->clk_gating.ungate_work);
+			flush_result = flush_work(&hba->clk_gating.ungate_work);
+			if (hba->clk_gating.is_suspended && !flush_result)
+				goto out;
 			spin_lock_irqsave(hba->host->host_lock, flags);
 			goto start;
 		}
-- 
2.25.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.8 40/63] scsi: ufs: Improve interrupt handling for shared interrupts

[Sasha Levin]

From: Adrian Hunter <adrian.hunter@intel.com>

[ Upstream commit 127d5f7c4b653b8be5eb3b2c7bbe13728f9003ff ]

For shared interrupts, the interrupt status might be zero, so check that
first.

Link: https://lore.kernel.org/r/20200811133936.19171-2-adrian.hunter@intel.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 8185ab3b41c9b..2b449057deb83 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -5887,7 +5887,7 @@ static irqreturn_t ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status)
  */
 static irqreturn_t ufshcd_intr(int irq, void *__hba)
 {
-	u32 intr_status, enabled_intr_status;
+	u32 intr_status, enabled_intr_status = 0;
 	irqreturn_t retval = IRQ_NONE;
 	struct ufs_hba *hba = __hba;
 	int retries = hba->nutrs;
@@ -5901,7 +5901,7 @@ static irqreturn_t ufshcd_intr(int irq, void *__hba)
 	 * read, make sure we handle them by checking the interrupt status
 	 * again in a loop until we process all of the reqs before returning.
 	 */
-	do {
+	while (intr_status && retries--) {
 		enabled_intr_status =
 			intr_status & ufshcd_readl(hba, REG_INTERRUPT_ENABLE);
 		if (intr_status)
@@ -5910,7 +5910,7 @@ static irqreturn_t ufshcd_intr(int irq, void *__hba)
 			retval |= ufshcd_sl_intr(hba, enabled_intr_status);
 
 		intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS);
-	} while (intr_status && --retries);
+	}
 
 	if (retval == IRQ_NONE) {
 		dev_err(hba->dev, "%s: Unhandled interrupt 0x%08x\n",
-- 
2.25.1

[PATCH AUTOSEL 5.8 41/63] scsi: ufs: Clean up completed request without interrupt notification

[Sasha Levin]

From: Stanley Chu <stanley.chu@mediatek.com>

[ Upstream commit b10178ee7fa88b68a9e8adc06534d2605cb0ec23 ]

If somehow no interrupt notification is raised for a completed request and
its doorbell bit is cleared by host, UFS driver needs to cleanup its
outstanding bit in ufshcd_abort(). Otherwise, system may behave abnormally
in the following scenario:

After ufshcd_abort() returns, this request will be requeued by SCSI layer
with its outstanding bit set. Any future completed request will trigger
ufshcd_transfer_req_compl() to handle all "completed outstanding bits". At
this time the "abnormal outstanding bit" will be detected and the "requeued
request" will be chosen to execute request post-processing flow. This is
wrong because this request is still "alive".

Link: https://lore.kernel.org/r/20200811141859.27399-2-huobean@gmail.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 2b449057deb83..796c05e1b0091 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6437,7 +6437,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 			/* command completed already */
 			dev_err(hba->dev, "%s: cmd at tag %d successfully cleared from DB.\n",
 				__func__, tag);
-			goto out;
+			goto cleanup;
 		} else {
 			dev_err(hba->dev,
 				"%s: no response from device. tag = %d, err %d\n",
@@ -6471,6 +6471,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 		goto out;
 	}
 
+cleanup:
 	scsi_dma_unmap(cmd);
 
 	spin_lock_irqsave(host->host_lock, flags);
-- 
2.25.1

[PATCH AUTOSEL 5.8 41/63] scsi: ufs: Clean up completed request without interrupt notification

[Sasha Levin]

From: Stanley Chu <stanley.chu@mediatek.com>

[ Upstream commit b10178ee7fa88b68a9e8adc06534d2605cb0ec23 ]

If somehow no interrupt notification is raised for a completed request and
its doorbell bit is cleared by host, UFS driver needs to cleanup its
outstanding bit in ufshcd_abort(). Otherwise, system may behave abnormally
in the following scenario:

After ufshcd_abort() returns, this request will be requeued by SCSI layer
with its outstanding bit set. Any future completed request will trigger
ufshcd_transfer_req_compl() to handle all "completed outstanding bits". At
this time the "abnormal outstanding bit" will be detected and the "requeued
request" will be chosen to execute request post-processing flow. This is
wrong because this request is still "alive".

Link: https://lore.kernel.org/r/20200811141859.27399-2-huobean@gmail.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 2b449057deb83..796c05e1b0091 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6437,7 +6437,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 			/* command completed already */
 			dev_err(hba->dev, "%s: cmd at tag %d successfully cleared from DB.\n",
 				__func__, tag);
-			goto out;
+			goto cleanup;
 		} else {
 			dev_err(hba->dev,
 				"%s: no response from device. tag = %d, err %d\n",
@@ -6471,6 +6471,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 		goto out;
 	}
 
+cleanup:
 	scsi_dma_unmap(cmd);
 
 	spin_lock_irqsave(host->host_lock, flags);
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.8 41/63] scsi: ufs: Clean up completed request without interrupt notification

[Sasha Levin]

From: Stanley Chu <stanley.chu@mediatek.com>

[ Upstream commit b10178ee7fa88b68a9e8adc06534d2605cb0ec23 ]

If somehow no interrupt notification is raised for a completed request and
its doorbell bit is cleared by host, UFS driver needs to cleanup its
outstanding bit in ufshcd_abort(). Otherwise, system may behave abnormally
in the following scenario:

After ufshcd_abort() returns, this request will be requeued by SCSI layer
with its outstanding bit set. Any future completed request will trigger
ufshcd_transfer_req_compl() to handle all "completed outstanding bits". At
this time the "abnormal outstanding bit" will be detected and the "requeued
request" will be chosen to execute request post-processing flow. This is
wrong because this request is still "alive".

Link: https://lore.kernel.org/r/20200811141859.27399-2-huobean@gmail.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 2b449057deb83..796c05e1b0091 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6437,7 +6437,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 			/* command completed already */
 			dev_err(hba->dev, "%s: cmd at tag %d successfully cleared from DB.\n",
 				__func__, tag);
-			goto out;
+			goto cleanup;
 		} else {
 			dev_err(hba->dev,
 				"%s: no response from device. tag = %d, err %d\n",
@@ -6471,6 +6471,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 		goto out;
 	}
 
+cleanup:
 	scsi_dma_unmap(cmd);
 
 	spin_lock_irqsave(host->host_lock, flags);
-- 
2.25.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.8 42/63] scsi: scsi_debug: Fix scp is NULL errors

[Sasha Levin]

From: Douglas Gilbert <dgilbert@interlog.com>

[ Upstream commit 223f91b48079227f914657f07d2d686f7b60aa26 ]

John Garry reported 'sdebug_q_cmd_complete: scp is NULL' failures that were
mainly seen on aarch64 machines (e.g. RPi 4 with four A72 CPUs). The
problem was tracked down to a missing critical section on a "short circuit"
path. Namely, the time to process the current command so far has already
exceeded the requested command duration (i.e. the number of nanoseconds in
the ndelay parameter).

The random=1 parameter setting was pivotal in finding this error.  The
failure scenario involved first taking that "short circuit" path (due to a
very short command duration) and then taking the more likely
hrtimer_start() path (due to a longer command duration). With random=1 each
command's duration is taken from the uniformly distributed [0..ndelay)
interval.  The fio utility also helped by reliably generating the error
scenario at about once per minute on a RPi 4 (64 bit OS).

Link: https://lore.kernel.org/r/20200813155738.109298-1-dgilbert@interlog.com
Reported-by: John Garry <john.garry@huawei.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_debug.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index b0d93bf79978f..25faad7f8e617 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -5486,9 +5486,11 @@ static int schedule_resp(struct scsi_cmnd *cmnd, struct sdebug_dev_info *devip,
 				u64 d = ktime_get_boottime_ns() - ns_from_boot;
 
 				if (kt <= d) {	/* elapsed duration >= kt */
+					spin_lock_irqsave(&sqp->qc_lock, iflags);
 					sqcp->a_cmnd = NULL;
 					atomic_dec(&devip->num_in_q);
 					clear_bit(k, sqp->in_use_bm);
+					spin_unlock_irqrestore(&sqp->qc_lock, iflags);
 					if (new_sd_dp)
 						kfree(sd_dp);
 					/* call scsi_done() from this thread */
-- 
2.25.1

[PATCH AUTOSEL 5.8 43/63] scsi: qla2xxx: Flush all sessions on zone disable

[Sasha Levin]

From: Quinn Tran <qutran@marvell.com>

[ Upstream commit 10ae30ba664822f62de169a61628e31c999c7cc8 ]

On Zone Disable, certain switches would ignore all commands. This causes
timeout for both switch scan command and abort of that command. On
detection of this condition, all sessions will be shutdown.

Link: https://lore.kernel.org/r/20200806111014.28434-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_gs.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index df670fba2ab8a..c6b6a3250312e 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -3736,6 +3736,18 @@ static void qla2x00_async_gpnft_gnnft_sp_done(srb_t *sp, int res)
 		unsigned long flags;
 		const char *name = sp->name;
 
+		if (res == QLA_OS_TIMER_EXPIRED) {
+			/* switch is ignoring all commands.
+			 * This might be a zone disable behavior.
+			 * This means we hit 64s timeout.
+			 * 22s GPNFT + 44s Abort = 64s
+			 */
+			ql_dbg(ql_dbg_disc, vha, 0xffff,
+			       "%s: Switch Zone check please .\n",
+			       name);
+			qla2x00_mark_all_devices_lost(vha);
+		}
+
 		/*
 		 * We are in an Interrupt context, queue up this
 		 * sp for GNNFT_DONE work. This will allow all
-- 
2.25.1

[PATCH AUTOSEL 5.8 44/63] scsi: qla2xxx: Flush I/O on zone disable

[Sasha Levin]

From: Quinn Tran <qutran@marvell.com>

[ Upstream commit a117579d0205b5a0592a3a98493e2b875e4da236 ]

Perform implicit logout to flush I/O on zone disable.

Link: https://lore.kernel.org/r/20200806111014.28434-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_gs.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index c6b6a3250312e..7074073446701 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -3436,7 +3436,6 @@ void qla24xx_async_gnnft_done(scsi_qla_host_t *vha, srb_t *sp)
 			list_for_each_entry(fcport, &vha->vp_fcports, list) {
 				if ((fcport->flags & FCF_FABRIC_DEVICE) != 0) {
 					fcport->scan_state = QLA_FCPORT_SCAN;
-					fcport->logout_on_delete = 0;
 				}
 			}
 			goto login_logout;
-- 
2.25.1

[PATCH AUTOSEL 5.8 45/63] scsi: qla2xxx: Indicate correct supported speeds for Mezz card

[Sasha Levin]

From: Quinn Tran <qutran@marvell.com>

[ Upstream commit 4709272f6327cc4a8ee1dc55771bcf9718346980 ]

Correct the supported speeds for 16G Mezz card.

Link: https://lore.kernel.org/r/20200806111014.28434-4-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_gs.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 7074073446701..3bfb5678f6515 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -1505,11 +1505,11 @@ qla2x00_prep_ct_fdmi_req(struct ct_sns_pkt *p, uint16_t cmd,
 static uint
 qla25xx_fdmi_port_speed_capability(struct qla_hw_data *ha)
 {
+	uint speeds = 0;
+
 	if (IS_CNA_CAPABLE(ha))
 		return FDMI_PORT_SPEED_10GB;
 	if (IS_QLA28XX(ha) || IS_QLA27XX(ha)) {
-		uint speeds = 0;
-
 		if (ha->max_supported_speed == 2) {
 			if (ha->min_supported_speed <= 6)
 				speeds |= FDMI_PORT_SPEED_64GB;
@@ -1536,9 +1536,16 @@ qla25xx_fdmi_port_speed_capability(struct qla_hw_data *ha)
 		}
 		return speeds;
 	}
-	if (IS_QLA2031(ha))
-		return FDMI_PORT_SPEED_16GB|FDMI_PORT_SPEED_8GB|
-			FDMI_PORT_SPEED_4GB;
+	if (IS_QLA2031(ha)) {
+		if ((ha->pdev->subsystem_vendor == 0x103C) &&
+		    (ha->pdev->subsystem_device == 0x8002)) {
+			speeds = FDMI_PORT_SPEED_16GB;
+		} else {
+			speeds = FDMI_PORT_SPEED_16GB|FDMI_PORT_SPEED_8GB|
+				FDMI_PORT_SPEED_4GB;
+		}
+		return speeds;
+	}
 	if (IS_QLA25XX(ha))
 		return FDMI_PORT_SPEED_8GB|FDMI_PORT_SPEED_4GB|
 			FDMI_PORT_SPEED_2GB|FDMI_PORT_SPEED_1GB;
-- 
2.25.1

[PATCH AUTOSEL 5.8 46/63] scsi: qla2xxx: Fix login timeout

[Sasha Levin]

From: Quinn Tran <qutran@marvell.com>

[ Upstream commit abb31aeaa9b20680b0620b23fea5475ea4591e31 ]

Multipath errors were seen during failback due to login timeout.  The
remote device sent LOGO, the local host tore down the session and did
relogin. The RSCN arrived indicates remote device is going through failover
after which the relogin is in a 20s timeout phase.  At this point the
driver is stuck in the relogin process.  Add a fix to delete the session as
part of abort/flush the login.

Link: https://lore.kernel.org/r/20200806111014.28434-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_gs.c     | 18 +++++++++++++++---
 drivers/scsi/qla2xxx/qla_target.c |  2 +-
 2 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 3bfb5678f6515..de9fd7f688d01 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -3538,10 +3538,22 @@ void qla24xx_async_gnnft_done(scsi_qla_host_t *vha, srb_t *sp)
 		}
 
 		if (fcport->scan_state != QLA_FCPORT_FOUND) {
+			bool do_delete = false;
+
+			if (fcport->scan_needed &&
+			    fcport->disc_state == DSC_LOGIN_PEND) {
+				/* Cable got disconnected after we sent
+				 * a login. Do delete to prevent timeout.
+				 */
+				fcport->logout_on_delete = 1;
+				do_delete = true;
+			}
+
 			fcport->scan_needed = 0;
-			if ((qla_dual_mode_enabled(vha) ||
-				qla_ini_mode_enabled(vha)) &&
-			    atomic_read(&fcport->state) == FCS_ONLINE) {
+			if (((qla_dual_mode_enabled(vha) ||
+			      qla_ini_mode_enabled(vha)) &&
+			    atomic_read(&fcport->state) == FCS_ONLINE) ||
+				do_delete) {
 				if (fcport->loop_id != FC_NO_LOOP_ID) {
 					if (fcport->flags & FCF_FCP2_DEVICE)
 						fcport->logout_on_delete = 0;
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index fbb80a043b4fe..90289162dbd4c 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -1270,7 +1270,7 @@ void qlt_schedule_sess_for_deletion(struct fc_port *sess)
 
 	qla24xx_chk_fcp_state(sess);
 
-	ql_dbg(ql_dbg_tgt, sess->vha, 0xe001,
+	ql_dbg(ql_dbg_disc, sess->vha, 0xe001,
 	    "Scheduling sess %p for deletion %8phC\n",
 	    sess, sess->port_name);
 
-- 
2.25.1

[PATCH AUTOSEL 5.8 47/63] scsi: qla2xxx: Check if FW supports MQ before enabling

[Sasha Levin]

From: Saurav Kashyap <skashyap@marvell.com>

[ Upstream commit dffa11453313a115157b19021cc2e27ea98e624c ]

OS boot during Boot from SAN was stuck at dracut emergency shell after
enabling NVMe driver parameter. For non-MQ support the driver was enabling
MQ. Add a check to confirm if FW supports MQ.

Link: https://lore.kernel.org/r/20200806111014.28434-9-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_os.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index e92fad99338cd..00c854b9b4179 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2017,6 +2017,11 @@ qla2x00_iospace_config(struct qla_hw_data *ha)
 	/* Determine queue resources */
 	ha->max_req_queues = ha->max_rsp_queues = 1;
 	ha->msix_count = QLA_BASE_VECTORS;
+
+	/* Check if FW supports MQ or not */
+	if (!(ha->fw_attributes & BIT_6))
+		goto mqiobase_exit;
+
 	if (!ql2xmqsupport || !ql2xnvmeenable ||
 	    (!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
 		goto mqiobase_exit;
-- 
2.25.1

[PATCH AUTOSEL 5.8 48/63] scsi: qla2xxx: Fix null pointer access during disconnect from subsystem

[Sasha Levin]

From: Quinn Tran <qutran@marvell.com>

[ Upstream commit 83949613fac61e8e37eadf8275bf072342302f4e ]

NVMEAsync command is being submitted to QLA while the same NVMe controller
is in the middle of reset. The reset path has deleted the association and
freed aen_op->fcp_req.private. Add a check for this private pointer before
issuing the command.

...
 6 [ffffb656ca11fce0] page_fault at ffffffff8c00114e
    [exception RIP: qla_nvme_post_cmd+394]
    RIP: ffffffffc0d012ba  RSP: ffffb656ca11fd98  RFLAGS: 00010206
    RAX: ffff8fb039eda228  RBX: ffff8fb039eda200  RCX: 00000000000da161
    RDX: ffffffffc0d4d0f0  RSI: ffffffffc0d26c9b  RDI: ffff8fb039eda220
    RBP: 0000000000000013   R8: ffff8fb47ff6aa80   R9: 0000000000000002
    R10: 0000000000000000  R11: ffffb656ca11fdc8  R12: ffff8fb27d04a3b0
    R13: ffff8fc46dd98a58  R14: 0000000000000000  R15: ffff8fc4540f0000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 7 [ffffb656ca11fe08] nvme_fc_start_fcp_op at ffffffffc0241568 [nvme_fc]
 8 [ffffb656ca11fe50] nvme_fc_submit_async_event at ffffffffc0241901 [nvme_fc]
 9 [ffffb656ca11fe68] nvme_async_event_work at ffffffffc014543d [nvme_core]
10 [ffffb656ca11fe98] process_one_work at ffffffff8b6cd437
11 [ffffb656ca11fed8] worker_thread at ffffffff8b6cdcef
12 [ffffb656ca11ff10] kthread at ffffffff8b6d3402
13 [ffffb656ca11ff50] ret_from_fork at ffffffff8c000255

--
PID: 37824  TASK: ffff8fb033063d80  CPU: 20  COMMAND: "kworker/u97:451"
 0 [ffffb656ce1abc28] __schedule at ffffffff8be629e3
 1 [ffffb656ce1abcc8] schedule at ffffffff8be62fe8
 2 [ffffb656ce1abcd0] schedule_timeout at ffffffff8be671ed
 3 [ffffb656ce1abd70] wait_for_completion at ffffffff8be639cf
 4 [ffffb656ce1abdd0] flush_work at ffffffff8b6ce2d5
 5 [ffffb656ce1abe70] nvme_stop_ctrl at ffffffffc0144900 [nvme_core]
 6 [ffffb656ce1abe80] nvme_fc_reset_ctrl_work at ffffffffc0243445 [nvme_fc]
 7 [ffffb656ce1abe98] process_one_work at ffffffff8b6cd437
 8 [ffffb656ce1abed8] worker_thread at ffffffff8b6cdb50
 9 [ffffb656ce1abf10] kthread at ffffffff8b6d3402
10 [ffffb656ce1abf50] ret_from_fork at ffffffff8c000255

Link: https://lore.kernel.org/r/20200806111014.28434-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_nvme.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c
index fa695a4007f86..262dfd7635a48 100644
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -536,6 +536,11 @@ static int qla_nvme_post_cmd(struct nvme_fc_local_port *lport,
 	struct nvme_private *priv = fd->private;
 	struct qla_nvme_rport *qla_rport = rport->private;
 
+	if (!priv) {
+		/* nvme association has been torn down */
+		return rval;
+	}
+
 	fcport = qla_rport->fcport;
 
 	if (!qpair || !fcport || (qpair && !qpair->fw_started) ||
-- 
2.25.1

[PATCH AUTOSEL 5.8 49/63] Revert "scsi: qla2xxx: Fix crash on qla2x00_mailbox_command"

[Sasha Levin]

From: Saurav Kashyap <skashyap@marvell.com>

[ Upstream commit de7e6194301ad31c4ce95395eb678e51a1b907e5 ]

FCoE adapter initialization failed for ISP8021 with the following patch
applied. In addition, reproduction of the issue the patch originally tried
to address has been unsuccessful.

This reverts commit 3cb182b3fa8b7a61f05c671525494697cba39c6a.

Link: https://lore.kernel.org/r/20200806111014.28434-11-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_mbx.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index df31ee0d59b20..fdb2ce7acb912 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -333,14 +333,6 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 			if (time_after(jiffies, wait_time))
 				break;
 
-			/*
-			 * Check if it's UNLOADING, cause we cannot poll in
-			 * this case, or else a NULL pointer dereference
-			 * is triggered.
-			 */
-			if (unlikely(test_bit(UNLOADING, &base_vha->dpc_flags)))
-				return QLA_FUNCTION_TIMEOUT;
-
 			/* Check for pending interrupts. */
 			qla2x00_poll(ha->rsp_q_map[0]);
 
-- 
2.25.1

[PATCH AUTOSEL 5.8 50/63] macvlan: validate setting of multiple remote source MAC addresses

[Sasha Levin]

From: Alvin Šipraga <alsi@bang-olufsen.dk>

[ Upstream commit 8b61fba503904acae24aeb2bd5569b4d6544d48f ]

Remote source MAC addresses can be set on a 'source mode' macvlan
interface via the IFLA_MACVLAN_MACADDR_DATA attribute. This commit
tightens the validation of these MAC addresses to match the validation
already performed when setting or adding a single MAC address via the
IFLA_MACVLAN_MACADDR attribute.

iproute2 uses IFLA_MACVLAN_MACADDR_DATA for its 'macvlan macaddr set'
command, and IFLA_MACVLAN_MACADDR for its 'macvlan macaddr add' command,
which demonstrates the inconsistent behaviour that this commit
addresses:

 # ip link add link eth0 name macvlan0 type macvlan mode source
 # ip link set link dev macvlan0 type macvlan macaddr add 01:00:00:00:00:00
 RTNETLINK answers: Cannot assign requested address
 # ip link set link dev macvlan0 type macvlan macaddr set 01:00:00:00:00:00
 # ip -d link show macvlan0
 5: macvlan0@eth0: <BROADCAST,MULTICAST,DYNAMIC,UP,LOWER_UP> mtu 1500 ...
     link/ether 2e:ac:fd:2d:69:f8 brd ff:ff:ff:ff:ff:ff promiscuity 0
     macvlan mode source remotes (1) 01:00:00:00:00:00 numtxqueues 1 ...

With this change, the 'set' command will (rightly) fail in the same way
as the 'add' command.

Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macvlan.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 4942f6112e51f..5da04e9979894 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -1269,6 +1269,9 @@ static void macvlan_port_destroy(struct net_device *dev)
 static int macvlan_validate(struct nlattr *tb[], struct nlattr *data[],
 			    struct netlink_ext_ack *extack)
 {
+	struct nlattr *nla, *head;
+	int rem, len;
+
 	if (tb[IFLA_ADDRESS]) {
 		if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
 			return -EINVAL;
@@ -1316,6 +1319,20 @@ static int macvlan_validate(struct nlattr *tb[], struct nlattr *data[],
 			return -EADDRNOTAVAIL;
 	}
 
+	if (data[IFLA_MACVLAN_MACADDR_DATA]) {
+		head = nla_data(data[IFLA_MACVLAN_MACADDR_DATA]);
+		len = nla_len(data[IFLA_MACVLAN_MACADDR_DATA]);
+
+		nla_for_each_attr(nla, head, len, rem) {
+			if (nla_type(nla) != IFLA_MACVLAN_MACADDR ||
+			    nla_len(nla) != ETH_ALEN)
+				return -EINVAL;
+
+			if (!is_valid_ether_addr(nla_data(nla)))
+				return -EADDRNOTAVAIL;
+		}
+	}
+
 	if (data[IFLA_MACVLAN_MACADDR_COUNT])
 		return -EINVAL;
 
@@ -1372,10 +1389,6 @@ static int macvlan_changelink_sources(struct macvlan_dev *vlan, u32 mode,
 		len = nla_len(data[IFLA_MACVLAN_MACADDR_DATA]);
 
 		nla_for_each_attr(nla, head, len, rem) {
-			if (nla_type(nla) != IFLA_MACVLAN_MACADDR ||
-			    nla_len(nla) != ETH_ALEN)
-				continue;
-
 			addr = nla_data(nla);
 			ret = macvlan_hash_add_source(vlan, addr);
 			if (ret)
-- 
2.25.1

[PATCH AUTOSEL 5.8 51/63] net: gianfar: Add of_node_put() before goto statement

[Sasha Levin]

From: Sumera Priyadarsini <sylphrenadin@gmail.com>

[ Upstream commit 989e4da042ca4a56bbaca9223d1a93639ad11e17 ]

Every iteration of for_each_available_child_of_node() decrements
reference count of the previous node, however when control
is transferred from the middle of the loop, as in the case of
a return or break or goto, there is no decrement thus ultimately
resulting in a memory leak.

Fix a potential memory leak in gianfar.c by inserting of_node_put()
before the goto statement.

Issue found with Coccinelle.

Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/gianfar.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index b513b8c5c3b5e..41dd3d0f34524 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -750,8 +750,10 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
 				continue;
 
 			err = gfar_parse_group(child, priv, model);
-			if (err)
+			if (err) {
+				of_node_put(child);
 				goto err_grp_init;
+			}
 		}
 	} else { /* SQ_SG_MODE */
 		err = gfar_parse_group(np, priv, model);
-- 
2.25.1

[PATCH AUTOSEL 5.8 52/63] drm/amdgpu: disable gfxoff for navy_flounder

[Sasha Levin]

From: Jiansong Chen <Jiansong.Chen@amd.com>

[ Upstream commit 9c9b17a7d19a8e21db2e378784fff1128b46c9d3 ]

gfxoff is temporarily disabled for navy_flounder,
since at present the feature has broken some basic
amdgpu test.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index fac77a86c04b2..2c870ff7f8a45 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -3427,6 +3427,9 @@ static void gfx_v10_0_check_gfxoff_flag(struct amdgpu_device *adev)
 		if (!gfx_v10_0_navi10_gfxoff_should_enable(adev))
 			adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
 		break;
+	case CHIP_NAVY_FLOUNDER:
+		adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
+		break;
 	default:
 		break;
 	}
-- 
2.25.1

[PATCH AUTOSEL 5.8 52/63] drm/amdgpu: disable gfxoff for navy_flounder

[Sasha Levin]

From: Jiansong Chen <Jiansong.Chen@amd.com>

[ Upstream commit 9c9b17a7d19a8e21db2e378784fff1128b46c9d3 ]

gfxoff is temporarily disabled for navy_flounder,
since at present the feature has broken some basic
amdgpu test.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index fac77a86c04b2..2c870ff7f8a45 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -3427,6 +3427,9 @@ static void gfx_v10_0_check_gfxoff_flag(struct amdgpu_device *adev)
 		if (!gfx_v10_0_navi10_gfxoff_should_enable(adev))
 			adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
 		break;
+	case CHIP_NAVY_FLOUNDER:
+		adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
+		break;
 	default:
 		break;
 	}
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.8 52/63] drm/amdgpu: disable gfxoff for navy_flounder

[Sasha Levin]

From: Jiansong Chen <Jiansong.Chen@amd.com>

[ Upstream commit 9c9b17a7d19a8e21db2e378784fff1128b46c9d3 ]

gfxoff is temporarily disabled for navy_flounder,
since at present the feature has broken some basic
amdgpu test.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index fac77a86c04b2..2c870ff7f8a45 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -3427,6 +3427,9 @@ static void gfx_v10_0_check_gfxoff_flag(struct amdgpu_device *adev)
 		if (!gfx_v10_0_navi10_gfxoff_should_enable(adev))
 			adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
 		break;
+	case CHIP_NAVY_FLOUNDER:
+		adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
+		break;
 	default:
 		break;
 	}
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH AUTOSEL 5.8 52/63] drm/amdgpu: disable gfxoff for navy_flounder

[Alex Deucher]

On Mon, Aug 24, 2020 at 12:36 PM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Jiansong Chen <Jiansong.Chen@amd.com>
>
> [ Upstream commit 9c9b17a7d19a8e21db2e378784fff1128b46c9d3 ]
>
> gfxoff is temporarily disabled for navy_flounder,
> since at present the feature has broken some basic
> amdgpu test.
>
> Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
> Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

Support for this chip does not exist in 5.8 or any other older trees.
Please drop this.

Alex


> ---
>  drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> index fac77a86c04b2..2c870ff7f8a45 100644
> --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> @@ -3427,6 +3427,9 @@ static void gfx_v10_0_check_gfxoff_flag(struct amdgpu_device *adev)
>                 if (!gfx_v10_0_navi10_gfxoff_should_enable(adev))
>                         adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
>                 break;
> +       case CHIP_NAVY_FLOUNDER:
> +               adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
> +               break;
>         default:
>                 break;
>         }
> --
> 2.25.1
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx

Re: [PATCH AUTOSEL 5.8 52/63] drm/amdgpu: disable gfxoff for navy_flounder

[Alex Deucher]

On Mon, Aug 24, 2020 at 12:36 PM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Jiansong Chen <Jiansong.Chen@amd.com>
>
> [ Upstream commit 9c9b17a7d19a8e21db2e378784fff1128b46c9d3 ]
>
> gfxoff is temporarily disabled for navy_flounder,
> since at present the feature has broken some basic
> amdgpu test.
>
> Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
> Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

Support for this chip does not exist in 5.8 or any other older trees.
Please drop this.

Alex


> ---
>  drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> index fac77a86c04b2..2c870ff7f8a45 100644
> --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> @@ -3427,6 +3427,9 @@ static void gfx_v10_0_check_gfxoff_flag(struct amdgpu_device *adev)
>                 if (!gfx_v10_0_navi10_gfxoff_should_enable(adev))
>                         adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
>                 break;
> +       case CHIP_NAVY_FLOUNDER:
> +               adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
> +               break;
>         default:
>                 break;
>         }
> --
> 2.25.1
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

Re: [PATCH AUTOSEL 5.8 52/63] drm/amdgpu: disable gfxoff for navy_flounder

[Alex Deucher]

On Mon, Aug 24, 2020 at 12:36 PM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Jiansong Chen <Jiansong.Chen@amd.com>
>
> [ Upstream commit 9c9b17a7d19a8e21db2e378784fff1128b46c9d3 ]
>
> gfxoff is temporarily disabled for navy_flounder,
> since at present the feature has broken some basic
> amdgpu test.
>
> Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
> Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

Support for this chip does not exist in 5.8 or any other older trees.
Please drop this.

Alex


> ---
>  drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> index fac77a86c04b2..2c870ff7f8a45 100644
> --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> @@ -3427,6 +3427,9 @@ static void gfx_v10_0_check_gfxoff_flag(struct amdgpu_device *adev)
>                 if (!gfx_v10_0_navi10_gfxoff_should_enable(adev))
>                         adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
>                 break;
> +       case CHIP_NAVY_FLOUNDER:
> +               adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
> +               break;
>         default:
>                 break;
>         }
> --
> 2.25.1
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH AUTOSEL 5.8 52/63] drm/amdgpu: disable gfxoff for navy_flounder

[Sasha Levin]

On Mon, Aug 24, 2020 at 02:23:42PM -0400, Alex Deucher wrote:
>On Mon, Aug 24, 2020 at 12:36 PM Sasha Levin <sashal@kernel.org> wrote:
>>
>> From: Jiansong Chen <Jiansong.Chen@amd.com>
>>
>> [ Upstream commit 9c9b17a7d19a8e21db2e378784fff1128b46c9d3 ]
>>
>> gfxoff is temporarily disabled for navy_flounder,
>> since at present the feature has broken some basic
>> amdgpu test.
>>
>> Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
>> Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
>> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
>Support for this chip does not exist in 5.8 or any other older trees.
>Please drop this.

I've dropped both of the commits you'ce pointed out from all branches.

-- 
Thanks,
Sasha

Re: [PATCH AUTOSEL 5.8 52/63] drm/amdgpu: disable gfxoff for navy_flounder

[Sasha Levin]

On Mon, Aug 24, 2020 at 02:23:42PM -0400, Alex Deucher wrote:
>On Mon, Aug 24, 2020 at 12:36 PM Sasha Levin <sashal@kernel.org> wrote:
>>
>> From: Jiansong Chen <Jiansong.Chen@amd.com>
>>
>> [ Upstream commit 9c9b17a7d19a8e21db2e378784fff1128b46c9d3 ]
>>
>> gfxoff is temporarily disabled for navy_flounder,
>> since at present the feature has broken some basic
>> amdgpu test.
>>
>> Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
>> Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
>> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
>Support for this chip does not exist in 5.8 or any other older trees.
>Please drop this.

I've dropped both of the commits you'ce pointed out from all branches.

-- 
Thanks,
Sasha
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

Re: [PATCH AUTOSEL 5.8 52/63] drm/amdgpu: disable gfxoff for navy_flounder

[Sasha Levin]

On Mon, Aug 24, 2020 at 02:23:42PM -0400, Alex Deucher wrote:
>On Mon, Aug 24, 2020 at 12:36 PM Sasha Levin <sashal@kernel.org> wrote:
>>
>> From: Jiansong Chen <Jiansong.Chen@amd.com>
>>
>> [ Upstream commit 9c9b17a7d19a8e21db2e378784fff1128b46c9d3 ]
>>
>> gfxoff is temporarily disabled for navy_flounder,
>> since at present the feature has broken some basic
>> amdgpu test.
>>
>> Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
>> Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
>> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
>Support for this chip does not exist in 5.8 or any other older trees.
>Please drop this.

I've dropped both of the commits you'ce pointed out from all branches.

-- 
Thanks,
Sasha
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.8 53/63] drm/amdgpu: fix NULL pointer access issue when unloading driver

[Sasha Levin]

From: Guchun Chen <guchun.chen@amd.com>

[ Upstream commit 1a68d96f81b8e7eb2a121fbf9abf9e5974e58832 ]

When unloading driver by "modprobe -r amdgpu", one NULL pointer
dereference bug occurs in ras debugfs releasing. The cause is the
duplicated debugfs_remove, as drm debugfs_root dir has been cleaned
up already by drm_minor_unregister.

BUG: kernel NULL pointer dereference, address: 00000000000000a0
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 11 PID: 1526 Comm: modprobe Tainted: G           OE     5.6.0-guchchen #1
Hardware name: System manufacturer System Product Name/TUF Z370-PLUS GAMING II, BIOS 0411 09/21/2018
RIP: 0010:down_write+0x15/0x40
Code: eb de e8 7e 17 72 ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 53 48 89 fb e8 92
d8 ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89 43 08 5b c3
RSP: 0018:ffffb1590386fcd0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000000000a0 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffff85b2fcc2 RDI: 00000000000000a0
RBP: ffffb1590386fd30 R08: ffffffff85b2fcc2 R09: 000000000002b3c0
R10: ffff97a330618c40 R11: 00000000000005f6 R12: ffff97a3481beb40
R13: 00000000000000a0 R14: ffff97a3481beb40 R15: 0000000000000000
FS:  00007fb11a717540(0000) GS:ffff97a376cc0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a0 CR3: 00000004066d6006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 simple_recursive_removal+0x63/0x370
 ? debugfs_remove+0x60/0x60
 debugfs_remove+0x40/0x60
 amdgpu_ras_fini+0x82/0x230 [amdgpu]
 ? __kernfs_remove.part.17+0x101/0x1f0
 ? kernfs_name_hash+0x12/0x80
 amdgpu_device_fini+0x1c0/0x580 [amdgpu]
 amdgpu_driver_unload_kms+0x3e/0x70 [amdgpu]
 amdgpu_pci_remove+0x36/0x60 [amdgpu]
 pci_device_remove+0x3b/0xb0
 device_release_driver_internal+0xe5/0x1c0
 driver_detach+0x46/0x90
 bus_remove_driver+0x58/0xd0
 pci_unregister_driver+0x29/0x90
 amdgpu_exit+0x11/0x25 [amdgpu]
 __x64_sys_delete_module+0x13d/0x210
 do_syscall_64+0x5f/0x250
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
index 50fe08bf2f727..5472fd26b3aa8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
@@ -1240,7 +1240,6 @@ void amdgpu_ras_debugfs_remove(struct amdgpu_device *adev,
 	if (!obj || !obj->ent)
 		return;
 
-	debugfs_remove(obj->ent);
 	obj->ent = NULL;
 	put_obj(obj);
 }
@@ -1254,7 +1253,6 @@ static void amdgpu_ras_debugfs_remove_all(struct amdgpu_device *adev)
 		amdgpu_ras_debugfs_remove(adev, &obj->head);
 	}
 
-	debugfs_remove_recursive(con->dir);
 	con->dir = NULL;
 }
 /* debugfs end */
-- 
2.25.1

[PATCH AUTOSEL 5.8 53/63] drm/amdgpu: fix NULL pointer access issue when unloading driver

[Sasha Levin]

From: Guchun Chen <guchun.chen@amd.com>

[ Upstream commit 1a68d96f81b8e7eb2a121fbf9abf9e5974e58832 ]

When unloading driver by "modprobe -r amdgpu", one NULL pointer
dereference bug occurs in ras debugfs releasing. The cause is the
duplicated debugfs_remove, as drm debugfs_root dir has been cleaned
up already by drm_minor_unregister.

BUG: kernel NULL pointer dereference, address: 00000000000000a0
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 11 PID: 1526 Comm: modprobe Tainted: G           OE     5.6.0-guchchen #1
Hardware name: System manufacturer System Product Name/TUF Z370-PLUS GAMING II, BIOS 0411 09/21/2018
RIP: 0010:down_write+0x15/0x40
Code: eb de e8 7e 17 72 ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 53 48 89 fb e8 92
d8 ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89 43 08 5b c3
RSP: 0018:ffffb1590386fcd0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000000000a0 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffff85b2fcc2 RDI: 00000000000000a0
RBP: ffffb1590386fd30 R08: ffffffff85b2fcc2 R09: 000000000002b3c0
R10: ffff97a330618c40 R11: 00000000000005f6 R12: ffff97a3481beb40
R13: 00000000000000a0 R14: ffff97a3481beb40 R15: 0000000000000000
FS:  00007fb11a717540(0000) GS:ffff97a376cc0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a0 CR3: 00000004066d6006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 simple_recursive_removal+0x63/0x370
 ? debugfs_remove+0x60/0x60
 debugfs_remove+0x40/0x60
 amdgpu_ras_fini+0x82/0x230 [amdgpu]
 ? __kernfs_remove.part.17+0x101/0x1f0
 ? kernfs_name_hash+0x12/0x80
 amdgpu_device_fini+0x1c0/0x580 [amdgpu]
 amdgpu_driver_unload_kms+0x3e/0x70 [amdgpu]
 amdgpu_pci_remove+0x36/0x60 [amdgpu]
 pci_device_remove+0x3b/0xb0
 device_release_driver_internal+0xe5/0x1c0
 driver_detach+0x46/0x90
 bus_remove_driver+0x58/0xd0
 pci_unregister_driver+0x29/0x90
 amdgpu_exit+0x11/0x25 [amdgpu]
 __x64_sys_delete_module+0x13d/0x210
 do_syscall_64+0x5f/0x250
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
index 50fe08bf2f727..5472fd26b3aa8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
@@ -1240,7 +1240,6 @@ void amdgpu_ras_debugfs_remove(struct amdgpu_device *adev,
 	if (!obj || !obj->ent)
 		return;
 
-	debugfs_remove(obj->ent);
 	obj->ent = NULL;
 	put_obj(obj);
 }
@@ -1254,7 +1253,6 @@ static void amdgpu_ras_debugfs_remove_all(struct amdgpu_device *adev)
 		amdgpu_ras_debugfs_remove(adev, &obj->head);
 	}
 
-	debugfs_remove_recursive(con->dir);
 	con->dir = NULL;
 }
 /* debugfs end */
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.8 53/63] drm/amdgpu: fix NULL pointer access issue when unloading driver

[Sasha Levin]

From: Guchun Chen <guchun.chen@amd.com>

[ Upstream commit 1a68d96f81b8e7eb2a121fbf9abf9e5974e58832 ]

When unloading driver by "modprobe -r amdgpu", one NULL pointer
dereference bug occurs in ras debugfs releasing. The cause is the
duplicated debugfs_remove, as drm debugfs_root dir has been cleaned
up already by drm_minor_unregister.

BUG: kernel NULL pointer dereference, address: 00000000000000a0
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 11 PID: 1526 Comm: modprobe Tainted: G           OE     5.6.0-guchchen #1
Hardware name: System manufacturer System Product Name/TUF Z370-PLUS GAMING II, BIOS 0411 09/21/2018
RIP: 0010:down_write+0x15/0x40
Code: eb de e8 7e 17 72 ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 53 48 89 fb e8 92
d8 ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89 43 08 5b c3
RSP: 0018:ffffb1590386fcd0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000000000a0 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffff85b2fcc2 RDI: 00000000000000a0
RBP: ffffb1590386fd30 R08: ffffffff85b2fcc2 R09: 000000000002b3c0
R10: ffff97a330618c40 R11: 00000000000005f6 R12: ffff97a3481beb40
R13: 00000000000000a0 R14: ffff97a3481beb40 R15: 0000000000000000
FS:  00007fb11a717540(0000) GS:ffff97a376cc0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a0 CR3: 00000004066d6006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 simple_recursive_removal+0x63/0x370
 ? debugfs_remove+0x60/0x60
 debugfs_remove+0x40/0x60
 amdgpu_ras_fini+0x82/0x230 [amdgpu]
 ? __kernfs_remove.part.17+0x101/0x1f0
 ? kernfs_name_hash+0x12/0x80
 amdgpu_device_fini+0x1c0/0x580 [amdgpu]
 amdgpu_driver_unload_kms+0x3e/0x70 [amdgpu]
 amdgpu_pci_remove+0x36/0x60 [amdgpu]
 pci_device_remove+0x3b/0xb0
 device_release_driver_internal+0xe5/0x1c0
 driver_detach+0x46/0x90
 bus_remove_driver+0x58/0xd0
 pci_unregister_driver+0x29/0x90
 amdgpu_exit+0x11/0x25 [amdgpu]
 __x64_sys_delete_module+0x13d/0x210
 do_syscall_64+0x5f/0x250
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
index 50fe08bf2f727..5472fd26b3aa8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
@@ -1240,7 +1240,6 @@ void amdgpu_ras_debugfs_remove(struct amdgpu_device *adev,
 	if (!obj || !obj->ent)
 		return;
 
-	debugfs_remove(obj->ent);
 	obj->ent = NULL;
 	put_obj(obj);
 }
@@ -1254,7 +1253,6 @@ static void amdgpu_ras_debugfs_remove_all(struct amdgpu_device *adev)
 		amdgpu_ras_debugfs_remove(adev, &obj->head);
 	}
 
-	debugfs_remove_recursive(con->dir);
 	con->dir = NULL;
 }
 /* debugfs end */
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.8 54/63] drm/amdkfd: fix the wrong sdma instance query for renoir

[Sasha Levin]

From: Huang Rui <ray.huang@amd.com>

[ Upstream commit 34174b89bfa495bed9cddcc504fb38feca90fab7 ]

Renoir only has one sdma instance, it will get failed once query the
sdma1 registers. So use switch-case instead of static register array.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c | 31 +++++++++++++------
 1 file changed, 22 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c
index c7fd0c47b2545..1102de76d8767 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c
@@ -195,19 +195,32 @@ static uint32_t get_sdma_rlc_reg_offset(struct amdgpu_device *adev,
 				unsigned int engine_id,
 				unsigned int queue_id)
 {
-	uint32_t sdma_engine_reg_base[2] = {
-		SOC15_REG_OFFSET(SDMA0, 0,
-				 mmSDMA0_RLC0_RB_CNTL) - mmSDMA0_RLC0_RB_CNTL,
-		SOC15_REG_OFFSET(SDMA1, 0,
-				 mmSDMA1_RLC0_RB_CNTL) - mmSDMA1_RLC0_RB_CNTL
-	};
-	uint32_t retval = sdma_engine_reg_base[engine_id]
+	uint32_t sdma_engine_reg_base = 0;
+	uint32_t sdma_rlc_reg_offset;
+
+	switch (engine_id) {
+	default:
+		dev_warn(adev->dev,
+			 "Invalid sdma engine id (%d), using engine id 0\n",
+			 engine_id);
+		fallthrough;
+	case 0:
+		sdma_engine_reg_base = SOC15_REG_OFFSET(SDMA0, 0,
+				mmSDMA0_RLC0_RB_CNTL) - mmSDMA0_RLC0_RB_CNTL;
+		break;
+	case 1:
+		sdma_engine_reg_base = SOC15_REG_OFFSET(SDMA1, 0,
+				mmSDMA1_RLC0_RB_CNTL) - mmSDMA0_RLC0_RB_CNTL;
+		break;
+	}
+
+	sdma_rlc_reg_offset = sdma_engine_reg_base
 		+ queue_id * (mmSDMA0_RLC1_RB_CNTL - mmSDMA0_RLC0_RB_CNTL);
 
 	pr_debug("RLC register offset for SDMA%d RLC%d: 0x%x\n", engine_id,
-			queue_id, retval);
+		 queue_id, sdma_rlc_reg_offset);
 
-	return retval;
+	return sdma_rlc_reg_offset;
 }
 
 static inline struct v9_mqd *get_mqd(void *mqd)
-- 
2.25.1

[PATCH AUTOSEL 5.8 54/63] drm/amdkfd: fix the wrong sdma instance query for renoir

[Sasha Levin]

From: Huang Rui <ray.huang@amd.com>

[ Upstream commit 34174b89bfa495bed9cddcc504fb38feca90fab7 ]

Renoir only has one sdma instance, it will get failed once query the
sdma1 registers. So use switch-case instead of static register array.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c | 31 +++++++++++++------
 1 file changed, 22 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c
index c7fd0c47b2545..1102de76d8767 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c
@@ -195,19 +195,32 @@ static uint32_t get_sdma_rlc_reg_offset(struct amdgpu_device *adev,
 				unsigned int engine_id,
 				unsigned int queue_id)
 {
-	uint32_t sdma_engine_reg_base[2] = {
-		SOC15_REG_OFFSET(SDMA0, 0,
-				 mmSDMA0_RLC0_RB_CNTL) - mmSDMA0_RLC0_RB_CNTL,
-		SOC15_REG_OFFSET(SDMA1, 0,
-				 mmSDMA1_RLC0_RB_CNTL) - mmSDMA1_RLC0_RB_CNTL
-	};
-	uint32_t retval = sdma_engine_reg_base[engine_id]
+	uint32_t sdma_engine_reg_base = 0;
+	uint32_t sdma_rlc_reg_offset;
+
+	switch (engine_id) {
+	default:
+		dev_warn(adev->dev,
+			 "Invalid sdma engine id (%d), using engine id 0\n",
+			 engine_id);
+		fallthrough;
+	case 0:
+		sdma_engine_reg_base = SOC15_REG_OFFSET(SDMA0, 0,
+				mmSDMA0_RLC0_RB_CNTL) - mmSDMA0_RLC0_RB_CNTL;
+		break;
+	case 1:
+		sdma_engine_reg_base = SOC15_REG_OFFSET(SDMA1, 0,
+				mmSDMA1_RLC0_RB_CNTL) - mmSDMA0_RLC0_RB_CNTL;
+		break;
+	}
+
+	sdma_rlc_reg_offset = sdma_engine_reg_base
 		+ queue_id * (mmSDMA0_RLC1_RB_CNTL - mmSDMA0_RLC0_RB_CNTL);
 
 	pr_debug("RLC register offset for SDMA%d RLC%d: 0x%x\n", engine_id,
-			queue_id, retval);
+		 queue_id, sdma_rlc_reg_offset);
 
-	return retval;
+	return sdma_rlc_reg_offset;
 }
 
 static inline struct v9_mqd *get_mqd(void *mqd)
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.8 54/63] drm/amdkfd: fix the wrong sdma instance query for renoir

[Sasha Levin]

From: Huang Rui <ray.huang@amd.com>

[ Upstream commit 34174b89bfa495bed9cddcc504fb38feca90fab7 ]

Renoir only has one sdma instance, it will get failed once query the
sdma1 registers. So use switch-case instead of static register array.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c | 31 +++++++++++++------
 1 file changed, 22 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c
index c7fd0c47b2545..1102de76d8767 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c
@@ -195,19 +195,32 @@ static uint32_t get_sdma_rlc_reg_offset(struct amdgpu_device *adev,
 				unsigned int engine_id,
 				unsigned int queue_id)
 {
-	uint32_t sdma_engine_reg_base[2] = {
-		SOC15_REG_OFFSET(SDMA0, 0,
-				 mmSDMA0_RLC0_RB_CNTL) - mmSDMA0_RLC0_RB_CNTL,
-		SOC15_REG_OFFSET(SDMA1, 0,
-				 mmSDMA1_RLC0_RB_CNTL) - mmSDMA1_RLC0_RB_CNTL
-	};
-	uint32_t retval = sdma_engine_reg_base[engine_id]
+	uint32_t sdma_engine_reg_base = 0;
+	uint32_t sdma_rlc_reg_offset;
+
+	switch (engine_id) {
+	default:
+		dev_warn(adev->dev,
+			 "Invalid sdma engine id (%d), using engine id 0\n",
+			 engine_id);
+		fallthrough;
+	case 0:
+		sdma_engine_reg_base = SOC15_REG_OFFSET(SDMA0, 0,
+				mmSDMA0_RLC0_RB_CNTL) - mmSDMA0_RLC0_RB_CNTL;
+		break;
+	case 1:
+		sdma_engine_reg_base = SOC15_REG_OFFSET(SDMA1, 0,
+				mmSDMA1_RLC0_RB_CNTL) - mmSDMA0_RLC0_RB_CNTL;
+		break;
+	}
+
+	sdma_rlc_reg_offset = sdma_engine_reg_base
 		+ queue_id * (mmSDMA0_RLC1_RB_CNTL - mmSDMA0_RLC0_RB_CNTL);
 
 	pr_debug("RLC register offset for SDMA%d RLC%d: 0x%x\n", engine_id,
-			queue_id, retval);
+		 queue_id, sdma_rlc_reg_offset);
 
-	return retval;
+	return sdma_rlc_reg_offset;
 }
 
 static inline struct v9_mqd *get_mqd(void *mqd)
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.8 55/63] bpf: Fix a rcu_sched stall issue with bpf task/task_file iterator

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit e679654a704e5bd676ea6446fa7b764cbabf168a ]

In our production system, we observed rcu stalls when
'bpftool prog` is running.
  rcu: INFO: rcu_sched self-detected stall on CPU
  rcu: \x097-....: (20999 ticks this GP) idle=302/1/0x4000000000000000 softirq=1508852/1508852 fqs=4913
  \x09(t=21031 jiffies g=2534773 q=179750)
  NMI backtrace for cpu 7
  CPU: 7 PID: 184195 Comm: bpftool Kdump: loaded Tainted: G        W         5.8.0-00004-g68bfc7f8c1b4 #6
  Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A17 05/03/2019
  Call Trace:
  <IRQ>
  dump_stack+0x57/0x70
  nmi_cpu_backtrace.cold+0x14/0x53
  ? lapic_can_unplug_cpu.cold+0x39/0x39
  nmi_trigger_cpumask_backtrace+0xb7/0xc7
  rcu_dump_cpu_stacks+0xa2/0xd0
  rcu_sched_clock_irq.cold+0x1ff/0x3d9
  ? tick_nohz_handler+0x100/0x100
  update_process_times+0x5b/0x90
  tick_sched_timer+0x5e/0xf0
  __hrtimer_run_queues+0x12a/0x2a0
  hrtimer_interrupt+0x10e/0x280
  __sysvec_apic_timer_interrupt+0x51/0xe0
  asm_call_on_stack+0xf/0x20
  </IRQ>
  sysvec_apic_timer_interrupt+0x6f/0x80
  asm_sysvec_apic_timer_interrupt+0x12/0x20
  RIP: 0010:task_file_seq_get_next+0x71/0x220
  Code: 00 00 8b 53 1c 49 8b 7d 00 89 d6 48 8b 47 20 44 8b 18 41 39 d3 76 75 48 8b 4f 20 8b 01 39 d0 76 61 41 89 d1 49 39 c1 48 19 c0 <48> 8b 49 08 21 d0 48 8d 04 c1 4c 8b 08 4d 85 c9 74 46 49 8b 41 38
  RSP: 0018:ffffc90006223e10 EFLAGS: 00000297
  RAX: ffffffffffffffff RBX: ffff888f0d172388 RCX: ffff888c8c07c1c0
  RDX: 00000000000f017b RSI: 00000000000f017b RDI: ffff888c254702c0
  RBP: ffffc90006223e68 R08: ffff888be2a1c140 R09: 00000000000f017b
  R10: 0000000000000002 R11: 0000000000100000 R12: ffff888f23c24118
  R13: ffffc90006223e60 R14: ffffffff828509a0 R15: 00000000ffffffff
  task_file_seq_next+0x52/0xa0
  bpf_seq_read+0xb9/0x320
  vfs_read+0x9d/0x180
  ksys_read+0x5f/0xe0
  do_syscall_64+0x38/0x60
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f8815f4f76e
  Code: c0 e9 f6 fe ff ff 55 48 8d 3d 76 70 0a 00 48 89 e5 e8 36 06 02 00 66 0f 1f 44 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00 f0 ff ff 77 52 c3 66 0f 1f 84 00 00 00 00 00 55 48 89 e5
  RSP: 002b:00007fff8f9df578 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
  RAX: ffffffffffffffda RBX: 000000000170b9c0 RCX: 00007f8815f4f76e
  RDX: 0000000000001000 RSI: 00007fff8f9df5b0 RDI: 0000000000000007
  RBP: 00007fff8f9e05f0 R08: 0000000000000049 R09: 0000000000000010
  R10: 00007f881601fa40 R11: 0000000000000246 R12: 00007fff8f9e05a8
  R13: 00007fff8f9e05a8 R14: 0000000001917f90 R15: 000000000000e22e

Note that `bpftool prog` actually calls a task_file bpf iterator
program to establish an association between prog/map/link/btf anon
files and processes.

In the case where the above rcu stall occured, we had a process
having 1587 tasks and each task having roughly 81305 files.
This implied 129 million bpf prog invocations. Unfortunwtely none of
these files are prog/map/link/btf files so bpf iterator/prog needs
to traverse all these files and not able to return to user space
since there are no seq_file buffer overflow.

This patch fixed the issue in bpf_seq_read() to limit the number
of visited objects. If the maximum number of visited objects is
reached, no more objects will be visited in the current syscall.
If there is nothing written in the seq_file buffer, -EAGAIN will
return to the user so user can try again.

The maximum number of visited objects is set at 1 million.
In our Intel Xeon D-2191 2.3GHZ 18-core server, bpf_seq_read()
visiting 1 million files takes around 0.18 seconds.

We did not use cond_resched() since for some iterators, e.g.,
netlink iterator, where rcu read_lock critical section spans between
consecutive seq_ops->next(), which makes impossible to do cond_resched()
in the key while loop of function bpf_seq_read().

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/bpf/20200818222309.2181348-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/bpf_iter.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/kernel/bpf/bpf_iter.c b/kernel/bpf/bpf_iter.c
index dd612b80b9fea..3c18090cd73dc 100644
--- a/kernel/bpf/bpf_iter.c
+++ b/kernel/bpf/bpf_iter.c
@@ -64,6 +64,9 @@ static void bpf_iter_done_stop(struct seq_file *seq)
 	iter_priv->done_stop = true;
 }
 
+/* maximum visited objects before bailing out */
+#define MAX_ITER_OBJECTS	1000000
+
 /* bpf_seq_read, a customized and simpler version for bpf iterator.
  * no_llseek is assumed for this file.
  * The following are differences from seq_read():
@@ -76,7 +79,7 @@ static ssize_t bpf_seq_read(struct file *file, char __user *buf, size_t size,
 {
 	struct seq_file *seq = file->private_data;
 	size_t n, offs, copied = 0;
-	int err = 0;
+	int err = 0, num_objs = 0;
 	void *p;
 
 	mutex_lock(&seq->lock);
@@ -132,6 +135,7 @@ static ssize_t bpf_seq_read(struct file *file, char __user *buf, size_t size,
 	while (1) {
 		loff_t pos = seq->index;
 
+		num_objs++;
 		offs = seq->count;
 		p = seq->op->next(seq, p, &seq->index);
 		if (pos == seq->index) {
@@ -150,6 +154,15 @@ static ssize_t bpf_seq_read(struct file *file, char __user *buf, size_t size,
 		if (seq->count >= size)
 			break;
 
+		if (num_objs >= MAX_ITER_OBJECTS) {
+			if (offs == 0) {
+				err = -EAGAIN;
+				seq->op->stop(seq, p);
+				goto done;
+			}
+			break;
+		}
+
 		err = seq->op->show(seq, p);
 		if (err > 0) {
 			bpf_iter_dec_seq_num(seq);
-- 
2.25.1

[PATCH AUTOSEL 5.8 56/63] bpf: Avoid visit same object multiple times

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit e60572b8d4c39572be6857d1ec91fdf979f8775f ]

Currently when traversing all tasks, the next tid
is always increased by one. This may result in
visiting the same task multiple times in a
pid namespace.

This patch fixed the issue by seting the next
tid as pid_nr_ns(pid, ns) + 1, similar to
funciton next_tgid().

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/bpf/20200818222310.2181500-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/task_iter.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/bpf/task_iter.c b/kernel/bpf/task_iter.c
index ac7869a389990..cd7d9564bcef6 100644
--- a/kernel/bpf/task_iter.c
+++ b/kernel/bpf/task_iter.c
@@ -28,8 +28,9 @@ static struct task_struct *task_seq_get_next(struct pid_namespace *ns,
 
 	rcu_read_lock();
 retry:
-	pid = idr_get_next(&ns->idr, tid);
+	pid = find_ge_pid(*tid, ns);
 	if (pid) {
+		*tid = pid_nr_ns(pid, ns);
 		task = get_pid_task(pid, PIDTYPE_PID);
 		if (!task) {
 			++*tid;
-- 
2.25.1

[PATCH AUTOSEL 5.8 57/63] ext4: limit the length of per-inode prealloc list

[Sasha Levin]

From: brookxu <brookxu.cn@gmail.com>

[ Upstream commit 27bc446e2def38db3244a6eb4bb1d6312936610a ]

In the scenario of writing sparse files, the per-inode prealloc list may
be very long, resulting in high overhead for ext4_mb_use_preallocated().
To circumvent this problem, we limit the maximum length of per-inode
prealloc list to 512 and allow users to modify it.

After patching, we observed that the sys ratio of cpu has dropped, and
the system throughput has increased significantly. We created a process
to write the sparse file, and the running time of the process on the
fixed kernel was significantly reduced, as follows:

Running time on unfixed kernel：
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real    0m2.051s
user    0m0.008s
sys     0m2.026s

Running time on fixed kernel：
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real    0m0.471s
user    0m0.004s
sys     0m0.395s

Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/d7a98178-056b-6db5-6bce-4ead23f4a257@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/admin-guide/ext4.rst |  3 ++
 fs/ext4/ext4.h                     |  4 +-
 fs/ext4/extents.c                  | 10 ++--
 fs/ext4/file.c                     |  2 +-
 fs/ext4/indirect.c                 |  2 +-
 fs/ext4/inode.c                    |  6 +--
 fs/ext4/ioctl.c                    |  2 +-
 fs/ext4/mballoc.c                  | 74 ++++++++++++++++++++++++++----
 fs/ext4/mballoc.h                  |  4 ++
 fs/ext4/move_extent.c              |  4 +-
 fs/ext4/super.c                    |  3 +-
 fs/ext4/sysfs.c                    |  2 +
 include/trace/events/ext4.h        | 17 ++++---
 13 files changed, 104 insertions(+), 29 deletions(-)

diff --git a/Documentation/admin-guide/ext4.rst b/Documentation/admin-guide/ext4.rst
index 9443fcef18760..f37d0743fd668 100644
--- a/Documentation/admin-guide/ext4.rst
+++ b/Documentation/admin-guide/ext4.rst
@@ -482,6 +482,9 @@ Files in /sys/fs/ext4/<devname>:
         multiple of this tuning parameter if the stripe size is not set in the
         ext4 superblock
 
+  mb_max_inode_prealloc
+        The maximum length of per-inode ext4_prealloc_space list.
+
   mb_max_to_scan
         The maximum number of extents the multiblock allocator will search to
         find the best extent.
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 6a76bd94277f0..b90d06334410c 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -1054,6 +1054,7 @@ struct ext4_inode_info {
 	struct timespec64 i_crtime;
 
 	/* mballoc */
+	atomic_t i_prealloc_active;
 	struct list_head i_prealloc_list;
 	spinlock_t i_prealloc_lock;
 
@@ -1501,6 +1502,7 @@ struct ext4_sb_info {
 	unsigned int s_mb_stats;
 	unsigned int s_mb_order2_reqs;
 	unsigned int s_mb_group_prealloc;
+	unsigned int s_mb_max_inode_prealloc;
 	unsigned int s_max_dir_size_kb;
 	/* where last allocation was done - for stream allocation */
 	unsigned long s_mb_last_group;
@@ -2654,7 +2656,7 @@ extern int ext4_mb_release(struct super_block *);
 extern ext4_fsblk_t ext4_mb_new_blocks(handle_t *,
 				struct ext4_allocation_request *, int *);
 extern int ext4_mb_reserve_blocks(struct super_block *, int);
-extern void ext4_discard_preallocations(struct inode *);
+extern void ext4_discard_preallocations(struct inode *, unsigned int);
 extern int __init ext4_init_mballoc(void);
 extern void ext4_exit_mballoc(void);
 extern void ext4_free_blocks(handle_t *handle, struct inode *inode,
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 221f240eae604..a40f928dcb1f1 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -100,7 +100,7 @@ static int ext4_ext_trunc_restart_fn(struct inode *inode, int *dropped)
 	 * i_mutex. So we can safely drop the i_data_sem here.
 	 */
 	BUG_ON(EXT4_JOURNAL(inode) == NULL);
-	ext4_discard_preallocations(inode);
+	ext4_discard_preallocations(inode, 0);
 	up_write(&EXT4_I(inode)->i_data_sem);
 	*dropped = 1;
 	return 0;
@@ -4272,7 +4272,7 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode,
 			 * not a good idea to call discard here directly,
 			 * but otherwise we'd need to call it every free().
 			 */
-			ext4_discard_preallocations(inode);
+			ext4_discard_preallocations(inode, 0);
 			if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
 				fb_flags = EXT4_FREE_BLOCKS_NO_QUOT_UPDATE;
 			ext4_free_blocks(handle, inode, NULL, newblock,
@@ -5299,7 +5299,7 @@ static int ext4_collapse_range(struct inode *inode, loff_t offset, loff_t len)
 	}
 
 	down_write(&EXT4_I(inode)->i_data_sem);
-	ext4_discard_preallocations(inode);
+	ext4_discard_preallocations(inode, 0);
 
 	ret = ext4_es_remove_extent(inode, punch_start,
 				    EXT_MAX_BLOCKS - punch_start);
@@ -5313,7 +5313,7 @@ static int ext4_collapse_range(struct inode *inode, loff_t offset, loff_t len)
 		up_write(&EXT4_I(inode)->i_data_sem);
 		goto out_stop;
 	}
-	ext4_discard_preallocations(inode);
+	ext4_discard_preallocations(inode, 0);
 
 	ret = ext4_ext_shift_extents(inode, handle, punch_stop,
 				     punch_stop - punch_start, SHIFT_LEFT);
@@ -5445,7 +5445,7 @@ static int ext4_insert_range(struct inode *inode, loff_t offset, loff_t len)
 		goto out_stop;
 
 	down_write(&EXT4_I(inode)->i_data_sem);
-	ext4_discard_preallocations(inode);
+	ext4_discard_preallocations(inode, 0);
 
 	path = ext4_find_extent(inode, offset_lblk, NULL, 0);
 	if (IS_ERR(path)) {
diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index 2a01e31a032c4..e3ab8ea1edf42 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -148,7 +148,7 @@ static int ext4_release_file(struct inode *inode, struct file *filp)
 		        !EXT4_I(inode)->i_reserved_data_blocks)
 	{
 		down_write(&EXT4_I(inode)->i_data_sem);
-		ext4_discard_preallocations(inode);
+		ext4_discard_preallocations(inode, 0);
 		up_write(&EXT4_I(inode)->i_data_sem);
 	}
 	if (is_dx(inode) && filp->private_data)
diff --git a/fs/ext4/indirect.c b/fs/ext4/indirect.c
index be2b66eb65f7a..ec6b930928cf6 100644
--- a/fs/ext4/indirect.c
+++ b/fs/ext4/indirect.c
@@ -696,7 +696,7 @@ static int ext4_ind_trunc_restart_fn(handle_t *handle, struct inode *inode,
 	 * i_mutex. So we can safely drop the i_data_sem here.
 	 */
 	BUG_ON(EXT4_JOURNAL(inode) == NULL);
-	ext4_discard_preallocations(inode);
+	ext4_discard_preallocations(inode, 0);
 	up_write(&EXT4_I(inode)->i_data_sem);
 	*dropped = 1;
 	return 0;
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 10dd470876b30..bb9e1cde29464 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -383,7 +383,7 @@ void ext4_da_update_reserve_space(struct inode *inode,
 	 */
 	if ((ei->i_reserved_data_blocks == 0) &&
 	    !inode_is_open_for_write(inode))
-		ext4_discard_preallocations(inode);
+		ext4_discard_preallocations(inode, 0);
 }
 
 static int __check_block_validity(struct inode *inode, const char *func,
@@ -4056,7 +4056,7 @@ int ext4_punch_hole(struct inode *inode, loff_t offset, loff_t length)
 	if (stop_block > first_block) {
 
 		down_write(&EXT4_I(inode)->i_data_sem);
-		ext4_discard_preallocations(inode);
+		ext4_discard_preallocations(inode, 0);
 
 		ret = ext4_es_remove_extent(inode, first_block,
 					    stop_block - first_block);
@@ -4211,7 +4211,7 @@ int ext4_truncate(struct inode *inode)
 
 	down_write(&EXT4_I(inode)->i_data_sem);
 
-	ext4_discard_preallocations(inode);
+	ext4_discard_preallocations(inode, 0);
 
 	if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
 		err = ext4_ext_truncate(handle, inode);
diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index 999cf6add39c6..a5fcc238c6693 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -202,7 +202,7 @@ static long swap_inode_boot_loader(struct super_block *sb,
 	reset_inode_seed(inode);
 	reset_inode_seed(inode_bl);
 
-	ext4_discard_preallocations(inode);
+	ext4_discard_preallocations(inode, 0);
 
 	err = ext4_mark_inode_dirty(handle, inode);
 	if (err < 0) {
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 9ed108b5bd7fd..b5fe1466cea85 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2755,6 +2755,7 @@ int ext4_mb_init(struct super_block *sb)
 	sbi->s_mb_stats = MB_DEFAULT_STATS;
 	sbi->s_mb_stream_request = MB_DEFAULT_STREAM_THRESHOLD;
 	sbi->s_mb_order2_reqs = MB_DEFAULT_ORDER2_REQS;
+	sbi->s_mb_max_inode_prealloc = MB_DEFAULT_MAX_INODE_PREALLOC;
 	/*
 	 * The default group preallocation is 512, which for 4k block
 	 * sizes translates to 2 megabytes.  However for bigalloc file
@@ -3693,6 +3694,26 @@ void ext4_mb_generate_from_pa(struct super_block *sb, void *bitmap,
 	mb_debug(sb, "preallocated %d for group %u\n", preallocated, group);
 }
 
+static void ext4_mb_mark_pa_deleted(struct super_block *sb,
+				    struct ext4_prealloc_space *pa)
+{
+	struct ext4_inode_info *ei;
+
+	if (pa->pa_deleted) {
+		ext4_warning(sb, "deleted pa, type:%d, pblk:%llu, lblk:%u, len:%d\n",
+			     pa->pa_type, pa->pa_pstart, pa->pa_lstart,
+			     pa->pa_len);
+		return;
+	}
+
+	pa->pa_deleted = 1;
+
+	if (pa->pa_type == MB_INODE_PA) {
+		ei = EXT4_I(pa->pa_inode);
+		atomic_dec(&ei->i_prealloc_active);
+	}
+}
+
 static void ext4_mb_pa_callback(struct rcu_head *head)
 {
 	struct ext4_prealloc_space *pa;
@@ -3725,7 +3746,7 @@ static void ext4_mb_put_pa(struct ext4_allocation_context *ac,
 		return;
 	}
 
-	pa->pa_deleted = 1;
+	ext4_mb_mark_pa_deleted(sb, pa);
 	spin_unlock(&pa->pa_lock);
 
 	grp_blk = pa->pa_pstart;
@@ -3849,6 +3870,7 @@ ext4_mb_new_inode_pa(struct ext4_allocation_context *ac)
 	spin_lock(pa->pa_obj_lock);
 	list_add_rcu(&pa->pa_inode_list, &ei->i_prealloc_list);
 	spin_unlock(pa->pa_obj_lock);
+	atomic_inc(&ei->i_prealloc_active);
 }
 
 /*
@@ -4059,7 +4081,7 @@ ext4_mb_discard_group_preallocations(struct super_block *sb,
 		}
 
 		/* seems this one can be freed ... */
-		pa->pa_deleted = 1;
+		ext4_mb_mark_pa_deleted(sb, pa);
 
 		/* we can trust pa_free ... */
 		free += pa->pa_free;
@@ -4122,7 +4144,7 @@ ext4_mb_discard_group_preallocations(struct super_block *sb,
  *
  * FIXME!! Make sure it is valid at all the call sites
  */
-void ext4_discard_preallocations(struct inode *inode)
+void ext4_discard_preallocations(struct inode *inode, unsigned int needed)
 {
 	struct ext4_inode_info *ei = EXT4_I(inode);
 	struct super_block *sb = inode->i_sb;
@@ -4140,15 +4162,19 @@ void ext4_discard_preallocations(struct inode *inode)
 
 	mb_debug(sb, "discard preallocation for inode %lu\n",
 		 inode->i_ino);
-	trace_ext4_discard_preallocations(inode);
+	trace_ext4_discard_preallocations(inode,
+			atomic_read(&ei->i_prealloc_active), needed);
 
 	INIT_LIST_HEAD(&list);
 
+	if (needed == 0)
+		needed = UINT_MAX;
+
 repeat:
 	/* first, collect all pa's in the inode */
 	spin_lock(&ei->i_prealloc_lock);
-	while (!list_empty(&ei->i_prealloc_list)) {
-		pa = list_entry(ei->i_prealloc_list.next,
+	while (!list_empty(&ei->i_prealloc_list) && needed) {
+		pa = list_entry(ei->i_prealloc_list.prev,
 				struct ext4_prealloc_space, pa_inode_list);
 		BUG_ON(pa->pa_obj_lock != &ei->i_prealloc_lock);
 		spin_lock(&pa->pa_lock);
@@ -4165,10 +4191,11 @@ void ext4_discard_preallocations(struct inode *inode)
 
 		}
 		if (pa->pa_deleted == 0) {
-			pa->pa_deleted = 1;
+			ext4_mb_mark_pa_deleted(sb, pa);
 			spin_unlock(&pa->pa_lock);
 			list_del_rcu(&pa->pa_inode_list);
 			list_add(&pa->u.pa_tmp_list, &list);
+			needed--;
 			continue;
 		}
 
@@ -4469,7 +4496,7 @@ ext4_mb_discard_lg_preallocations(struct super_block *sb,
 		BUG_ON(pa->pa_type != MB_GROUP_PA);
 
 		/* seems this one can be freed ... */
-		pa->pa_deleted = 1;
+		ext4_mb_mark_pa_deleted(sb, pa);
 		spin_unlock(&pa->pa_lock);
 
 		list_del_rcu(&pa->pa_inode_list);
@@ -4567,11 +4594,30 @@ static void ext4_mb_add_n_trim(struct ext4_allocation_context *ac)
 	return ;
 }
 
+/*
+ * if per-inode prealloc list is too long, trim some PA
+ */
+static void ext4_mb_trim_inode_pa(struct inode *inode)
+{
+	struct ext4_inode_info *ei = EXT4_I(inode);
+	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
+	int count, delta;
+
+	count = atomic_read(&ei->i_prealloc_active);
+	delta = (sbi->s_mb_max_inode_prealloc >> 2) + 1;
+	if (count > sbi->s_mb_max_inode_prealloc + delta) {
+		count -= sbi->s_mb_max_inode_prealloc;
+		ext4_discard_preallocations(inode, count);
+	}
+}
+
 /*
  * release all resource we used in allocation
  */
 static int ext4_mb_release_context(struct ext4_allocation_context *ac)
 {
+	struct inode *inode = ac->ac_inode;
+	struct ext4_inode_info *ei = EXT4_I(inode);
 	struct ext4_sb_info *sbi = EXT4_SB(ac->ac_sb);
 	struct ext4_prealloc_space *pa = ac->ac_pa;
 	if (pa) {
@@ -4598,6 +4644,17 @@ static int ext4_mb_release_context(struct ext4_allocation_context *ac)
 			spin_unlock(pa->pa_obj_lock);
 			ext4_mb_add_n_trim(ac);
 		}
+
+		if (pa->pa_type == MB_INODE_PA) {
+			/*
+			 * treat per-inode prealloc list as a lru list, then try
+			 * to trim the least recently used PA.
+			 */
+			spin_lock(pa->pa_obj_lock);
+			list_move(&pa->pa_inode_list, &ei->i_prealloc_list);
+			spin_unlock(pa->pa_obj_lock);
+		}
+
 		ext4_mb_put_pa(ac, ac->ac_sb, pa);
 	}
 	if (ac->ac_bitmap_page)
@@ -4607,6 +4664,7 @@ static int ext4_mb_release_context(struct ext4_allocation_context *ac)
 	if (ac->ac_flags & EXT4_MB_HINT_GROUP_ALLOC)
 		mutex_unlock(&ac->ac_lg->lg_mutex);
 	ext4_mb_collect_stats(ac);
+	ext4_mb_trim_inode_pa(inode);
 	return 0;
 }
 
diff --git a/fs/ext4/mballoc.h b/fs/ext4/mballoc.h
index 6b4d17c2935d6..e75b4749aa1c2 100644
--- a/fs/ext4/mballoc.h
+++ b/fs/ext4/mballoc.h
@@ -73,6 +73,10 @@
  */
 #define MB_DEFAULT_GROUP_PREALLOC	512
 
+/*
+ * maximum length of inode prealloc list
+ */
+#define MB_DEFAULT_MAX_INODE_PREALLOC	512
 
 struct ext4_free_data {
 	/* this links the free block information from sb_info */
diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c
index 1ed86fb6c3026..0d601b8228753 100644
--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -686,8 +686,8 @@ ext4_move_extents(struct file *o_filp, struct file *d_filp, __u64 orig_blk,
 
 out:
 	if (*moved_len) {
-		ext4_discard_preallocations(orig_inode);
-		ext4_discard_preallocations(donor_inode);
+		ext4_discard_preallocations(orig_inode, 0);
+		ext4_discard_preallocations(donor_inode, 0);
 	}
 
 	ext4_ext_drop_refs(path);
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index f3614299ffd09..0b38bf29c07e0 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1123,6 +1123,7 @@ static struct inode *ext4_alloc_inode(struct super_block *sb)
 	inode_set_iversion(&ei->vfs_inode, 1);
 	spin_lock_init(&ei->i_raw_lock);
 	INIT_LIST_HEAD(&ei->i_prealloc_list);
+	atomic_set(&ei->i_prealloc_active, 0);
 	spin_lock_init(&ei->i_prealloc_lock);
 	ext4_es_init_tree(&ei->i_es_tree);
 	rwlock_init(&ei->i_es_lock);
@@ -1216,7 +1217,7 @@ void ext4_clear_inode(struct inode *inode)
 {
 	invalidate_inode_buffers(inode);
 	clear_inode(inode);
-	ext4_discard_preallocations(inode);
+	ext4_discard_preallocations(inode, 0);
 	ext4_es_remove_extent(inode, 0, EXT_MAX_BLOCKS);
 	dquot_drop(inode);
 	if (EXT4_I(inode)->jinode) {
diff --git a/fs/ext4/sysfs.c b/fs/ext4/sysfs.c
index 6c9fc9e21c138..92f04e9e94413 100644
--- a/fs/ext4/sysfs.c
+++ b/fs/ext4/sysfs.c
@@ -215,6 +215,7 @@ EXT4_RW_ATTR_SBI_UI(mb_min_to_scan, s_mb_min_to_scan);
 EXT4_RW_ATTR_SBI_UI(mb_order2_req, s_mb_order2_reqs);
 EXT4_RW_ATTR_SBI_UI(mb_stream_req, s_mb_stream_request);
 EXT4_RW_ATTR_SBI_UI(mb_group_prealloc, s_mb_group_prealloc);
+EXT4_RW_ATTR_SBI_UI(mb_max_inode_prealloc, s_mb_max_inode_prealloc);
 EXT4_RW_ATTR_SBI_UI(extent_max_zeroout_kb, s_extent_max_zeroout_kb);
 EXT4_ATTR(trigger_fs_error, 0200, trigger_test_error);
 EXT4_RW_ATTR_SBI_UI(err_ratelimit_interval_ms, s_err_ratelimit_state.interval);
@@ -257,6 +258,7 @@ static struct attribute *ext4_attrs[] = {
 	ATTR_LIST(mb_order2_req),
 	ATTR_LIST(mb_stream_req),
 	ATTR_LIST(mb_group_prealloc),
+	ATTR_LIST(mb_max_inode_prealloc),
 	ATTR_LIST(max_writeback_mb_bump),
 	ATTR_LIST(extent_max_zeroout_kb),
 	ATTR_LIST(trigger_fs_error),
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
index cc41d692ae8ed..628db6a07fda0 100644
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -746,24 +746,29 @@ TRACE_EVENT(ext4_mb_release_group_pa,
 );
 
 TRACE_EVENT(ext4_discard_preallocations,
-	TP_PROTO(struct inode *inode),
+	TP_PROTO(struct inode *inode, unsigned int len, unsigned int needed),
 
-	TP_ARGS(inode),
+	TP_ARGS(inode, len, needed),
 
 	TP_STRUCT__entry(
-		__field(	dev_t,	dev			)
-		__field(	ino_t,	ino			)
+		__field(	dev_t,		dev		)
+		__field(	ino_t,		ino		)
+		__field(	unsigned int,	len		)
+		__field(	unsigned int,	needed		)
 
 	),
 
 	TP_fast_assign(
 		__entry->dev	= inode->i_sb->s_dev;
 		__entry->ino	= inode->i_ino;
+		__entry->len	= len;
+		__entry->needed	= needed;
 	),
 
-	TP_printk("dev %d,%d ino %lu",
+	TP_printk("dev %d,%d ino %lu len: %u needed %u",
 		  MAJOR(__entry->dev), MINOR(__entry->dev),
-		  (unsigned long) __entry->ino)
+		  (unsigned long) __entry->ino, __entry->len,
+		  __entry->needed)
 );
 
 TRACE_EVENT(ext4_mb_discard_preallocations,
-- 
2.25.1

[PATCH AUTOSEL 5.8 58/63] Revert "drm/amdgpu: disable gfxoff for navy_flounder"

[Sasha Levin]

From: Jiansong Chen <Jiansong.Chen@amd.com>

[ Upstream commit da2446b66b5e2c7f3ab63912c8d999810e35e8b3 ]

This reverts commit 9c9b17a7d19a8e21db2e378784fff1128b46c9d3.
Newly released sdma fw (51.52) provides a fix for the issue.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index 2c870ff7f8a45..fac77a86c04b2 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -3427,9 +3427,6 @@ static void gfx_v10_0_check_gfxoff_flag(struct amdgpu_device *adev)
 		if (!gfx_v10_0_navi10_gfxoff_should_enable(adev))
 			adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
 		break;
-	case CHIP_NAVY_FLOUNDER:
-		adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
-		break;
 	default:
 		break;
 	}
-- 
2.25.1

[PATCH AUTOSEL 5.8 58/63] Revert "drm/amdgpu: disable gfxoff for navy_flounder"

[Sasha Levin]

From: Jiansong Chen <Jiansong.Chen@amd.com>

[ Upstream commit da2446b66b5e2c7f3ab63912c8d999810e35e8b3 ]

This reverts commit 9c9b17a7d19a8e21db2e378784fff1128b46c9d3.
Newly released sdma fw (51.52) provides a fix for the issue.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index 2c870ff7f8a45..fac77a86c04b2 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -3427,9 +3427,6 @@ static void gfx_v10_0_check_gfxoff_flag(struct amdgpu_device *adev)
 		if (!gfx_v10_0_navi10_gfxoff_should_enable(adev))
 			adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
 		break;
-	case CHIP_NAVY_FLOUNDER:
-		adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
-		break;
 	default:
 		break;
 	}
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.8 58/63] Revert "drm/amdgpu: disable gfxoff for navy_flounder"

[Sasha Levin]

From: Jiansong Chen <Jiansong.Chen@amd.com>

[ Upstream commit da2446b66b5e2c7f3ab63912c8d999810e35e8b3 ]

This reverts commit 9c9b17a7d19a8e21db2e378784fff1128b46c9d3.
Newly released sdma fw (51.52) provides a fix for the issue.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index 2c870ff7f8a45..fac77a86c04b2 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -3427,9 +3427,6 @@ static void gfx_v10_0_check_gfxoff_flag(struct amdgpu_device *adev)
 		if (!gfx_v10_0_navi10_gfxoff_should_enable(adev))
 			adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
 		break;
-	case CHIP_NAVY_FLOUNDER:
-		adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
-		break;
 	default:
 		break;
 	}
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH AUTOSEL 5.8 58/63] Revert "drm/amdgpu: disable gfxoff for navy_flounder"

[Alex Deucher]

On Mon, Aug 24, 2020 at 12:36 PM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Jiansong Chen <Jiansong.Chen@amd.com>
>
> [ Upstream commit da2446b66b5e2c7f3ab63912c8d999810e35e8b3 ]
>
> This reverts commit 9c9b17a7d19a8e21db2e378784fff1128b46c9d3.
> Newly released sdma fw (51.52) provides a fix for the issue.
>
> Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
> Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
> Acked-by: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

Support for this chip does not exist in 5.8 or any other older trees.
Please drop this.

Alex

> ---
>  drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 3 ---
>  1 file changed, 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> index 2c870ff7f8a45..fac77a86c04b2 100644
> --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> @@ -3427,9 +3427,6 @@ static void gfx_v10_0_check_gfxoff_flag(struct amdgpu_device *adev)
>                 if (!gfx_v10_0_navi10_gfxoff_should_enable(adev))
>                         adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
>                 break;
> -       case CHIP_NAVY_FLOUNDER:
> -               adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
> -               break;
>         default:
>                 break;
>         }
> --
> 2.25.1
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx

Re: [PATCH AUTOSEL 5.8 58/63] Revert "drm/amdgpu: disable gfxoff for navy_flounder"

[Alex Deucher]

On Mon, Aug 24, 2020 at 12:36 PM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Jiansong Chen <Jiansong.Chen@amd.com>
>
> [ Upstream commit da2446b66b5e2c7f3ab63912c8d999810e35e8b3 ]
>
> This reverts commit 9c9b17a7d19a8e21db2e378784fff1128b46c9d3.
> Newly released sdma fw (51.52) provides a fix for the issue.
>
> Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
> Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
> Acked-by: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

Support for this chip does not exist in 5.8 or any other older trees.
Please drop this.

Alex

> ---
>  drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 3 ---
>  1 file changed, 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> index 2c870ff7f8a45..fac77a86c04b2 100644
> --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> @@ -3427,9 +3427,6 @@ static void gfx_v10_0_check_gfxoff_flag(struct amdgpu_device *adev)
>                 if (!gfx_v10_0_navi10_gfxoff_should_enable(adev))
>                         adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
>                 break;
> -       case CHIP_NAVY_FLOUNDER:
> -               adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
> -               break;
>         default:
>                 break;
>         }
> --
> 2.25.1
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

Re: [PATCH AUTOSEL 5.8 58/63] Revert "drm/amdgpu: disable gfxoff for navy_flounder"

[Alex Deucher]

On Mon, Aug 24, 2020 at 12:36 PM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Jiansong Chen <Jiansong.Chen@amd.com>
>
> [ Upstream commit da2446b66b5e2c7f3ab63912c8d999810e35e8b3 ]
>
> This reverts commit 9c9b17a7d19a8e21db2e378784fff1128b46c9d3.
> Newly released sdma fw (51.52) provides a fix for the issue.
>
> Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
> Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
> Acked-by: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

Support for this chip does not exist in 5.8 or any other older trees.
Please drop this.

Alex

> ---
>  drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 3 ---
>  1 file changed, 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> index 2c870ff7f8a45..fac77a86c04b2 100644
> --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
> @@ -3427,9 +3427,6 @@ static void gfx_v10_0_check_gfxoff_flag(struct amdgpu_device *adev)
>                 if (!gfx_v10_0_navi10_gfxoff_should_enable(adev))
>                         adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
>                 break;
> -       case CHIP_NAVY_FLOUNDER:
> -               adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
> -               break;
>         default:
>                 break;
>         }
> --
> 2.25.1
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.8 59/63] powerpc/perf: Fix soft lockups due to missed interrupt accounting

[Sasha Levin]

From: Athira Rajeev <atrajeev@linux.vnet.ibm.com>

[ Upstream commit 17899eaf88d689529b866371344c8f269ba79b5f ]

Performance monitor interrupt handler checks if any counter has
overflown and calls record_and_restart() in core-book3s which invokes
perf_event_overflow() to record the sample information. Apart from
creating sample, perf_event_overflow() also does the interrupt and
period checks via perf_event_account_interrupt().

Currently we record information only if the SIAR (Sampled Instruction
Address Register) valid bit is set (using siar_valid() check) and
hence the interrupt check.

But it is possible that we do sampling for some events that are not
generating valid SIAR, and hence there is no chance to disable the
event if interrupts are more than max_samples_per_tick. This leads to
soft lockup.

Fix this by adding perf_event_account_interrupt() in the invalid SIAR
code path for a sampling event. ie if SIAR is invalid, just do
interrupt check and don't record the sample information.

Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1596717992-7321-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/perf/core-book3s.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 01d70280d2872..190bc4f255b42 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -2101,6 +2101,10 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 
 		if (perf_event_overflow(event, &data, regs))
 			power_pmu_stop(event, 0);
+	} else if (period) {
+		/* Account for interrupt in case of invalid SIAR */
+		if (perf_event_account_interrupt(event))
+			power_pmu_stop(event, 0);
 	}
 }
 
-- 
2.25.1

[PATCH AUTOSEL 5.8 59/63] powerpc/perf: Fix soft lockups due to missed interrupt accounting

[Sasha Levin]

From: Athira Rajeev <atrajeev@linux.vnet.ibm.com>

[ Upstream commit 17899eaf88d689529b866371344c8f269ba79b5f ]

Performance monitor interrupt handler checks if any counter has
overflown and calls record_and_restart() in core-book3s which invokes
perf_event_overflow() to record the sample information. Apart from
creating sample, perf_event_overflow() also does the interrupt and
period checks via perf_event_account_interrupt().

Currently we record information only if the SIAR (Sampled Instruction
Address Register) valid bit is set (using siar_valid() check) and
hence the interrupt check.

But it is possible that we do sampling for some events that are not
generating valid SIAR, and hence there is no chance to disable the
event if interrupts are more than max_samples_per_tick. This leads to
soft lockup.

Fix this by adding perf_event_account_interrupt() in the invalid SIAR
code path for a sampling event. ie if SIAR is invalid, just do
interrupt check and don't record the sample information.

Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1596717992-7321-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/perf/core-book3s.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 01d70280d2872..190bc4f255b42 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -2101,6 +2101,10 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 
 		if (perf_event_overflow(event, &data, regs))
 			power_pmu_stop(event, 0);
+	} else if (period) {
+		/* Account for interrupt in case of invalid SIAR */
+		if (perf_event_account_interrupt(event))
+			power_pmu_stop(event, 0);
 	}
 }
 
-- 
2.25.1

[PATCH AUTOSEL 5.8 60/63] libbpf: Fix map index used in error message

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 1e891e513e16c145cc9b45b1fdb8bf4a4f2f9557 ]

The error message emitted by bpf_object__init_user_btf_maps() was using the
wrong section ID.

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200819110534.9058-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/libbpf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index e8e88c1ab69de..dd89cbc1acd7b 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -2237,7 +2237,7 @@ static int bpf_object__init_user_btf_maps(struct bpf_object *obj, bool strict,
 		data = elf_getdata(scn, NULL);
 	if (!scn || !data) {
 		pr_warn("failed to get Elf_Data from map section %d (%s)\n",
-			obj->efile.maps_shndx, MAPS_ELF_SEC);
+			obj->efile.btf_maps_shndx, MAPS_ELF_SEC);
 		return -EINVAL;
 	}
 
-- 
2.25.1

[PATCH AUTOSEL 5.8 61/63] bpf: selftests: global_funcs: Check err_str before strstr

[Sasha Levin]

From: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>

[ Upstream commit c210773d6c6f595f5922d56b7391fe343bc7310e ]

The error path in libbpf.c:load_program() has calls to pr_warn()
which ends up for global_funcs tests to
test_global_funcs.c:libbpf_debug_print().

For the tests with no struct test_def::err_str initialized with a
string, it causes call of strstr() with NULL as the second argument
and it segfaults.

Fix it by calling strstr() only for non-NULL err_str.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200820115843.39454-1-yauheni.kaliuta@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/prog_tests/test_global_funcs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/prog_tests/test_global_funcs.c b/tools/testing/selftests/bpf/prog_tests/test_global_funcs.c
index 25b068591e9a4..193002b14d7f6 100644
--- a/tools/testing/selftests/bpf/prog_tests/test_global_funcs.c
+++ b/tools/testing/selftests/bpf/prog_tests/test_global_funcs.c
@@ -19,7 +19,7 @@ static int libbpf_debug_print(enum libbpf_print_level level,
 	log_buf = va_arg(args, char *);
 	if (!log_buf)
 		goto out;
-	if (strstr(log_buf, err_str) == 0)
+	if (err_str && strstr(log_buf, err_str) == 0)
 		found = true;
 out:
 	printf(format, log_buf);
-- 
2.25.1

[PATCH AUTOSEL 5.8 62/63] arm64: Move handling of erratum 1418040 into C code

[Sasha Levin]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit d49f7d7376d0c0daf8680984a37bd07581ac7d38 ]

Instead of dealing with erratum 1418040 on each entry and exit,
let's move the handling to __switch_to() instead, which has
several advantages:

- It can be applied when it matters (switching between 32 and 64
  bit tasks).
- It is written in C (yay!)
- It can rely on static keys rather than alternatives

Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200731173824.107480-2-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/entry.S   | 21 ---------------------
 arch/arm64/kernel/process.c | 34 ++++++++++++++++++++++++++++++++++
 2 files changed, 34 insertions(+), 21 deletions(-)

diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 35de8ba60e3d5..44445d471442d 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -169,19 +169,6 @@ alternative_cb_end
 	stp	x28, x29, [sp, #16 * 14]
 
 	.if	\el == 0
-	.if	\regsize == 32
-	/*
-	 * If we're returning from a 32-bit task on a system affected by
-	 * 1418040 then re-enable userspace access to the virtual counter.
-	 */
-#ifdef CONFIG_ARM64_ERRATUM_1418040
-alternative_if ARM64_WORKAROUND_1418040
-	mrs	x0, cntkctl_el1
-	orr	x0, x0, #2	// ARCH_TIMER_USR_VCT_ACCESS_EN
-	msr	cntkctl_el1, x0
-alternative_else_nop_endif
-#endif
-	.endif
 	clear_gp_regs
 	mrs	x21, sp_el0
 	ldr_this_cpu	tsk, __entry_task, x20
@@ -337,14 +324,6 @@ alternative_else_nop_endif
 	tst	x22, #PSR_MODE32_BIT		// native task?
 	b.eq	3f
 
-#ifdef CONFIG_ARM64_ERRATUM_1418040
-alternative_if ARM64_WORKAROUND_1418040
-	mrs	x0, cntkctl_el1
-	bic	x0, x0, #2			// ARCH_TIMER_USR_VCT_ACCESS_EN
-	msr	cntkctl_el1, x0
-alternative_else_nop_endif
-#endif
-
 #ifdef CONFIG_ARM64_ERRATUM_845719
 alternative_if ARM64_WORKAROUND_845719
 #ifdef CONFIG_PID_IN_CONTEXTIDR
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 6089638c7d43f..d8a10cf28f827 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -515,6 +515,39 @@ static void entry_task_switch(struct task_struct *next)
 	__this_cpu_write(__entry_task, next);
 }
 
+/*
+ * ARM erratum 1418040 handling, affecting the 32bit view of CNTVCT.
+ * Assuming the virtual counter is enabled at the beginning of times:
+ *
+ * - disable access when switching from a 64bit task to a 32bit task
+ * - enable access when switching from a 32bit task to a 64bit task
+ */
+static void erratum_1418040_thread_switch(struct task_struct *prev,
+					  struct task_struct *next)
+{
+	bool prev32, next32;
+	u64 val;
+
+	if (!(IS_ENABLED(CONFIG_ARM64_ERRATUM_1418040) &&
+	      cpus_have_const_cap(ARM64_WORKAROUND_1418040)))
+		return;
+
+	prev32 = is_compat_thread(task_thread_info(prev));
+	next32 = is_compat_thread(task_thread_info(next));
+
+	if (prev32 == next32)
+		return;
+
+	val = read_sysreg(cntkctl_el1);
+
+	if (!next32)
+		val |= ARCH_TIMER_USR_VCT_ACCESS_EN;
+	else
+		val &= ~ARCH_TIMER_USR_VCT_ACCESS_EN;
+
+	write_sysreg(val, cntkctl_el1);
+}
+
 /*
  * Thread switching.
  */
@@ -530,6 +563,7 @@ __notrace_funcgraph struct task_struct *__switch_to(struct task_struct *prev,
 	entry_task_switch(next);
 	uao_thread_switch(next);
 	ssbs_thread_switch(next);
+	erratum_1418040_thread_switch(prev, next);
 
 	/*
 	 * Complete any pending TLB or cache maintenance on this CPU in case
-- 
2.25.1

[PATCH AUTOSEL 5.8 62/63] arm64: Move handling of erratum 1418040 into C code

[Sasha Levin]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit d49f7d7376d0c0daf8680984a37bd07581ac7d38 ]

Instead of dealing with erratum 1418040 on each entry and exit,
let's move the handling to __switch_to() instead, which has
several advantages:

- It can be applied when it matters (switching between 32 and 64
  bit tasks).
- It is written in C (yay!)
- It can rely on static keys rather than alternatives

Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200731173824.107480-2-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/entry.S   | 21 ---------------------
 arch/arm64/kernel/process.c | 34 ++++++++++++++++++++++++++++++++++
 2 files changed, 34 insertions(+), 21 deletions(-)

diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 35de8ba60e3d5..44445d471442d 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -169,19 +169,6 @@ alternative_cb_end
 	stp	x28, x29, [sp, #16 * 14]
 
 	.if	\el == 0
-	.if	\regsize == 32
-	/*
-	 * If we're returning from a 32-bit task on a system affected by
-	 * 1418040 then re-enable userspace access to the virtual counter.
-	 */
-#ifdef CONFIG_ARM64_ERRATUM_1418040
-alternative_if ARM64_WORKAROUND_1418040
-	mrs	x0, cntkctl_el1
-	orr	x0, x0, #2	// ARCH_TIMER_USR_VCT_ACCESS_EN
-	msr	cntkctl_el1, x0
-alternative_else_nop_endif
-#endif
-	.endif
 	clear_gp_regs
 	mrs	x21, sp_el0
 	ldr_this_cpu	tsk, __entry_task, x20
@@ -337,14 +324,6 @@ alternative_else_nop_endif
 	tst	x22, #PSR_MODE32_BIT		// native task?
 	b.eq	3f
 
-#ifdef CONFIG_ARM64_ERRATUM_1418040
-alternative_if ARM64_WORKAROUND_1418040
-	mrs	x0, cntkctl_el1
-	bic	x0, x0, #2			// ARCH_TIMER_USR_VCT_ACCESS_EN
-	msr	cntkctl_el1, x0
-alternative_else_nop_endif
-#endif
-
 #ifdef CONFIG_ARM64_ERRATUM_845719
 alternative_if ARM64_WORKAROUND_845719
 #ifdef CONFIG_PID_IN_CONTEXTIDR
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 6089638c7d43f..d8a10cf28f827 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -515,6 +515,39 @@ static void entry_task_switch(struct task_struct *next)
 	__this_cpu_write(__entry_task, next);
 }
 
+/*
+ * ARM erratum 1418040 handling, affecting the 32bit view of CNTVCT.
+ * Assuming the virtual counter is enabled at the beginning of times:
+ *
+ * - disable access when switching from a 64bit task to a 32bit task
+ * - enable access when switching from a 32bit task to a 64bit task
+ */
+static void erratum_1418040_thread_switch(struct task_struct *prev,
+					  struct task_struct *next)
+{
+	bool prev32, next32;
+	u64 val;
+
+	if (!(IS_ENABLED(CONFIG_ARM64_ERRATUM_1418040) &&
+	      cpus_have_const_cap(ARM64_WORKAROUND_1418040)))
+		return;
+
+	prev32 = is_compat_thread(task_thread_info(prev));
+	next32 = is_compat_thread(task_thread_info(next));
+
+	if (prev32 == next32)
+		return;
+
+	val = read_sysreg(cntkctl_el1);
+
+	if (!next32)
+		val |= ARCH_TIMER_USR_VCT_ACCESS_EN;
+	else
+		val &= ~ARCH_TIMER_USR_VCT_ACCESS_EN;
+
+	write_sysreg(val, cntkctl_el1);
+}
+
 /*
  * Thread switching.
  */
@@ -530,6 +563,7 @@ __notrace_funcgraph struct task_struct *__switch_to(struct task_struct *prev,
 	entry_task_switch(next);
 	uao_thread_switch(next);
 	ssbs_thread_switch(next);
+	erratum_1418040_thread_switch(prev, next);
 
 	/*
 	 * Complete any pending TLB or cache maintenance on this CPU in case
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.8 63/63] arm64: Allow booting of late CPUs affected by erratum 1418040

[Sasha Levin]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit bf87bb0881d0f59181fe3bbcf29c609f36483ff8 ]

As we can now switch from a system that isn't affected by 1418040
to a system that globally is affected, let's allow affected CPUs
to come in at a later time.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200731173824.107480-3-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/cpu_errata.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 79728bfb5351f..2c0b82db825ba 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -910,6 +910,8 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.desc = "ARM erratum 1418040",
 		.capability = ARM64_WORKAROUND_1418040,
 		ERRATA_MIDR_RANGE_LIST(erratum_1418040_list),
+		.type = (ARM64_CPUCAP_SCOPE_LOCAL_CPU |
+			 ARM64_CPUCAP_PERMITTED_FOR_LATE_CPU),
 	},
 #endif
 #ifdef CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT
-- 
2.25.1

[PATCH AUTOSEL 5.8 63/63] arm64: Allow booting of late CPUs affected by erratum 1418040

[Sasha Levin]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit bf87bb0881d0f59181fe3bbcf29c609f36483ff8 ]

As we can now switch from a system that isn't affected by 1418040
to a system that globally is affected, let's allow affected CPUs
to come in at a later time.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200731173824.107480-3-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/cpu_errata.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 79728bfb5351f..2c0b82db825ba 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -910,6 +910,8 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.desc = "ARM erratum 1418040",
 		.capability = ARM64_WORKAROUND_1418040,
 		ERRATA_MIDR_RANGE_LIST(erratum_1418040_list),
+		.type = (ARM64_CPUCAP_SCOPE_LOCAL_CPU |
+			 ARM64_CPUCAP_PERMITTED_FOR_LATE_CPU),
 	},
 #endif
 #ifdef CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel