From: Roger Quadros <rogerq@ti.com> To: <t-kristo@ti.com>, <nm@ti.com> Cc: <robh+dt@kernel.org>, <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <nsekhar@ti.com>, <kishon@ti.com>, Roger Quadros <rogerq@ti.com> Subject: [PATCH v3 0/6] arm64: dts: ti: Add USB support for J7200 EVM Date: Tue, 15 Sep 2020 14:20:32 +0300 [thread overview] Message-ID: <20200915112038.30219-1-rogerq@ti.com> (raw) Hi Tero/Nishanth, This series adds USB2.0 support for the J7200 EVM. Series is based on top of: Faiz's MMC/SD support series https://lore.kernel.org/lkml/20200907090520.25313-1-faiz_abbas@ti.com/ Lokesh's initial support series https://patchwork.kernel.org/cover/11740039/ Vignesh's I2C support series https://lore.kernel.org/patchwork/cover/1282152/ Vignesh's Hyperflash series https://lore.kernel.org/patchwork/cover/1285326/ cheers, -roger Changelog: v3: - use 0x00 instead of 0x0 in device tree for consistency. - update commit log for USB support patch. v2: - fixed warnings when built with W=2. Still one warning is present as property name "dr_mode" by USB core contains underscore. Kishon Vijay Abraham I (1): arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function Roger Quadros (5): dt-bindings: mux-j7200-wiz: Add lane function defines arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-common-proc-board: Add USB support .../dts/ti/k3-j7200-common-proc-board.dts | 28 ++++++++++ arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 51 +++++++++++++++++++ include/dt-bindings/mux/mux-j7200-wiz.h | 29 +++++++++++ 3 files changed, 108 insertions(+) create mode 100644 include/dt-bindings/mux/mux-j7200-wiz.h -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@ti.com> To: <t-kristo@ti.com>, <nm@ti.com> Cc: devicetree@vger.kernel.org, nsekhar@ti.com, linux-kernel@vger.kernel.org, kishon@ti.com, robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org, Roger Quadros <rogerq@ti.com> Subject: [PATCH v3 0/6] arm64: dts: ti: Add USB support for J7200 EVM Date: Tue, 15 Sep 2020 14:20:32 +0300 [thread overview] Message-ID: <20200915112038.30219-1-rogerq@ti.com> (raw) Hi Tero/Nishanth, This series adds USB2.0 support for the J7200 EVM. Series is based on top of: Faiz's MMC/SD support series https://lore.kernel.org/lkml/20200907090520.25313-1-faiz_abbas@ti.com/ Lokesh's initial support series https://patchwork.kernel.org/cover/11740039/ Vignesh's I2C support series https://lore.kernel.org/patchwork/cover/1282152/ Vignesh's Hyperflash series https://lore.kernel.org/patchwork/cover/1285326/ cheers, -roger Changelog: v3: - use 0x00 instead of 0x0 in device tree for consistency. - update commit log for USB support patch. v2: - fixed warnings when built with W=2. Still one warning is present as property name "dr_mode" by USB core contains underscore. Kishon Vijay Abraham I (1): arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function Roger Quadros (5): dt-bindings: mux-j7200-wiz: Add lane function defines arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-common-proc-board: Add USB support .../dts/ti/k3-j7200-common-proc-board.dts | 28 ++++++++++ arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 51 +++++++++++++++++++ include/dt-bindings/mux/mux-j7200-wiz.h | 29 +++++++++++ 3 files changed, 108 insertions(+) create mode 100644 include/dt-bindings/mux/mux-j7200-wiz.h -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-09-16 0:51 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-15 11:20 Roger Quadros [this message] 2020-09-15 11:20 ` [PATCH v3 0/6] arm64: dts: ti: Add USB support for J7200 EVM Roger Quadros 2020-09-15 11:20 ` [PATCH v3 1/6] dt-bindings: mux-j7200-wiz: Add lane function defines Roger Quadros 2020-09-15 11:20 ` Roger Quadros 2020-09-16 4:52 ` Peter Rosin 2020-09-16 4:52 ` Peter Rosin 2020-09-16 15:45 ` Nishanth Menon 2020-09-16 15:45 ` Nishanth Menon 2020-09-17 9:45 ` Peter Rosin 2020-09-17 9:45 ` Peter Rosin 2020-09-17 12:27 ` Nishanth Menon 2020-09-17 12:27 ` Nishanth Menon 2020-09-17 12:53 ` Peter Rosin 2020-09-17 12:53 ` Peter Rosin 2020-09-17 13:00 ` Nishanth Menon 2020-09-17 13:00 ` Nishanth Menon 2020-09-17 10:17 ` Kishon Vijay Abraham I 2020-09-17 10:17 ` Kishon Vijay Abraham I 2020-09-17 12:36 ` Nishanth Menon 2020-09-17 12:36 ` Nishanth Menon 2020-09-17 12:00 ` Roger Quadros 2020-09-17 12:00 ` Roger Quadros 2020-09-17 12:14 ` Nishanth Menon 2020-09-17 12:14 ` Nishanth Menon 2020-09-17 12:37 ` Peter Rosin 2020-09-17 12:37 ` Peter Rosin 2020-09-17 12:51 ` Nishanth Menon 2020-09-17 12:51 ` Nishanth Menon 2020-09-15 11:20 ` [PATCH v3 2/6] arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux Roger Quadros 2020-09-15 11:20 ` Roger Quadros 2020-09-15 11:20 ` [PATCH v3 3/6] arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX Roger Quadros 2020-09-15 11:20 ` Roger Quadros 2020-09-15 11:20 ` [PATCH v3 4/6] arm64: dts: ti: k3-j7200-main: Add USB controller Roger Quadros 2020-09-15 11:20 ` Roger Quadros 2020-09-15 11:20 ` [PATCH v3 5/6] arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function Roger Quadros 2020-09-15 11:20 ` Roger Quadros 2020-09-15 11:20 ` [PATCH v3 6/6] arm64: dts: ti: k3-j7200-common-proc-board: Add USB support Roger Quadros 2020-09-15 11:20 ` Roger Quadros
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200915112038.30219-1-rogerq@ti.com \ --to=rogerq@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=kishon@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=nsekhar@ti.com \ --cc=robh+dt@kernel.org \ --cc=t-kristo@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.