All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christian Eggers <ceggers@arri.de>
To: "Oleksij Rempel" <linux@rempel-privat.de>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Fabio Estevam" <festevam@gmail.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>,
	NXP Linux Team <linux-imx@nxp.com>, <linux-i2c@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Christian Eggers <ceggers@arri.de>, <stable@vger.kernel.org>
Subject: [PATCH v2 1/3] i2c: imx: Fix reset of I2SR_IAL flag
Date: Fri, 2 Oct 2020 17:23:03 +0200	[thread overview]
Message-ID: <20201002152305.4963-2-ceggers@arri.de> (raw)
In-Reply-To: <20201002152305.4963-1-ceggers@arri.de>

According to the "VFxxx Controller Reference Manual" (and the comment
block starting at line 97), Vybrid requires writing a one for clearing
an interrupt flag. Syncing the method for clearing I2SR_IIF in
i2c_imx_isr().

Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: stable@vger.kernel.org
---
 drivers/i2c/busses/i2c-imx.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 0ab5381aa012..34648df7f1a6 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -424,7 +424,12 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy, bool a
 
 		/* check for arbitration lost */
 		if (temp & I2SR_IAL) {
-			temp &= ~I2SR_IAL;
+			/*
+			 * i2sr_clr_opcode is the value to clear all interrupts.
+			 * Here we want to clear only I2SR_IAL, so we write
+			 * ~i2sr_clr_opcode with just the I2SR_IAL bit toggled.
+			 */
+			temp = ~i2c_imx->hwdata->i2sr_clr_opcode ^ I2SR_IAL;
 			imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
 			return -EAGAIN;
 		}
@@ -623,8 +628,12 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
 	if (temp & I2SR_IIF) {
 		/* save status register */
 		i2c_imx->i2csr = temp;
-		temp &= ~I2SR_IIF;
-		temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
+		/*
+		 * i2sr_clr_opcode is the value to clear all interrupts.
+		 * Here we want to clear only I2SR_IIF, so we write
+		 * ~i2sr_clr_opcode with just the I2SR_IIF bit toggled.
+		 */
+		temp = ~i2c_imx->hwdata->i2sr_clr_opcode ^ I2SR_IIF;
 		imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
 		wake_up(&i2c_imx->queue);
 		return IRQ_HANDLED;
-- 
Christian Eggers
Embedded software developer

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler


WARNING: multiple messages have this Message-ID (diff)
From: Christian Eggers <ceggers@arri.de>
To: "Oleksij Rempel" <linux@rempel-privat.de>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Fabio Estevam" <festevam@gmail.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: linux-kernel@vger.kernel.org, stable@vger.kernel.org,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Christian Eggers <ceggers@arri.de>,
	linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org
Subject: [PATCH v2 1/3] i2c: imx: Fix reset of I2SR_IAL flag
Date: Fri, 2 Oct 2020 17:23:03 +0200	[thread overview]
Message-ID: <20201002152305.4963-2-ceggers@arri.de> (raw)
In-Reply-To: <20201002152305.4963-1-ceggers@arri.de>

According to the "VFxxx Controller Reference Manual" (and the comment
block starting at line 97), Vybrid requires writing a one for clearing
an interrupt flag. Syncing the method for clearing I2SR_IIF in
i2c_imx_isr().

Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: stable@vger.kernel.org
---
 drivers/i2c/busses/i2c-imx.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 0ab5381aa012..34648df7f1a6 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -424,7 +424,12 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy, bool a
 
 		/* check for arbitration lost */
 		if (temp & I2SR_IAL) {
-			temp &= ~I2SR_IAL;
+			/*
+			 * i2sr_clr_opcode is the value to clear all interrupts.
+			 * Here we want to clear only I2SR_IAL, so we write
+			 * ~i2sr_clr_opcode with just the I2SR_IAL bit toggled.
+			 */
+			temp = ~i2c_imx->hwdata->i2sr_clr_opcode ^ I2SR_IAL;
 			imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
 			return -EAGAIN;
 		}
@@ -623,8 +628,12 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
 	if (temp & I2SR_IIF) {
 		/* save status register */
 		i2c_imx->i2csr = temp;
-		temp &= ~I2SR_IIF;
-		temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
+		/*
+		 * i2sr_clr_opcode is the value to clear all interrupts.
+		 * Here we want to clear only I2SR_IIF, so we write
+		 * ~i2sr_clr_opcode with just the I2SR_IIF bit toggled.
+		 */
+		temp = ~i2c_imx->hwdata->i2sr_clr_opcode ^ I2SR_IIF;
 		imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
 		wake_up(&i2c_imx->queue);
 		return IRQ_HANDLED;
-- 
Christian Eggers
Embedded software developer

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-10-02 15:25 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-02 15:23 [PATCH v2 0/3] i2c: imx: Fix handling of arbitration loss Christian Eggers
2020-10-02 15:23 ` Christian Eggers
2020-10-02 15:23 ` Christian Eggers [this message]
2020-10-02 15:23   ` [PATCH v2 1/3] i2c: imx: Fix reset of I2SR_IAL flag Christian Eggers
2020-10-05  8:05   ` Krzysztof Kozlowski
2020-10-05  8:05     ` Krzysztof Kozlowski
2020-10-06  6:05   ` Uwe Kleine-König
2020-10-06  6:05     ` Uwe Kleine-König
2020-10-06 10:51     ` [PATCH v3 0/3] i2c: imx: Fix handling of arbitration loss Christian Eggers
2020-10-06 10:51       ` Christian Eggers
2020-10-06 10:51       ` [PATCH v3 1/3] i2c: imx: Fix reset of I2SR_IAL flag Christian Eggers
2020-10-06 10:51         ` Christian Eggers
2020-10-06 12:06         ` David Laight
2020-10-06 12:06           ` David Laight
2020-10-06 12:30           ` Christian Eggers
2020-10-06 12:30             ` Christian Eggers
2020-10-06 12:46           ` Uwe Kleine-König
2020-10-06 12:46             ` Uwe Kleine-König
2020-10-06 12:52             ` David Laight
2020-10-06 12:52               ` David Laight
2020-10-06 10:51       ` [PATCH v3 2/3] i2c: imx: Check for I2SR_IAL after every byte Christian Eggers
2020-10-06 10:51         ` Christian Eggers
2020-10-06 10:51       ` [PATCH v3 3/3] i2c: imx: Don't generate STOP condition if arbitration has been lost Christian Eggers
2020-10-06 10:51         ` Christian Eggers
2020-10-02 15:23 ` [PATCH v2 2/3] i2c: imx: Check for I2SR_IAL after every byte Christian Eggers
2020-10-02 15:23   ` Christian Eggers
2020-10-05  8:07   ` Krzysztof Kozlowski
2020-10-05  8:07     ` Krzysztof Kozlowski
2020-10-05  9:25     ` Christian Eggers
2020-10-05  9:25       ` Christian Eggers
2020-10-02 15:23 ` [PATCH v2 3/3] i2c: imx: Don't generate STOP condition if arbitration has been lost Christian Eggers
2020-10-02 15:23   ` Christian Eggers
2020-10-05  8:16   ` Krzysztof Kozlowski
2020-10-05  8:16     ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201002152305.4963-2-ceggers@arri.de \
    --to=ceggers@arri.de \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@rempel-privat.de \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.