All of lore.kernel.org
 help / color / mirror / Atom feed
From: Aditya Swarup <aditya.swarup@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>,
	Lucas De Marchi <lucas.demarchi@intel.com>
Subject: [Intel-gfx] [PATCH 11/22] drm/i915/adl_s: Add adl-s ddc pin mapping
Date: Fri,  4 Dec 2020 17:08:33 -0800	[thread overview]
Message-ID: <20201205010844.361880-12-aditya.swarup@intel.com> (raw)
In-Reply-To: <20201205010844.361880-1-aditya.swarup@intel.com>

ADL-S requires TC pins to set up ddc for Combo PHY B, C, D and E.
Combo PHY A still uses the old ddc pin mapping.

From VBT, ddc pin info suggests the following mapping:
VBT 			               DRIVER
DDI B->ddc_pin=2 should translate to PORT_D->0x9
DDI C->ddc_pin=3 should translate to PORT_E->0xa
DDI D->ddc_pin=4 should translate to PORT_F->0xb
DDI E->ddc_pin=5 should translate to PORT_G->0xc

Adding pin map to facilitate this translation as we cannot use existing
icl ddc pin map due to conflict with DDI B and DDI C info.

Bspec:20124

v2: Replace IS_ALDERLAKE_S() with HAS_PCH_ADP() as the pin map pairing
depends on the PCH being used rather than the platform.(mdroper)

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
---
 drivers/gpu/drm/i915/display/intel_bios.c     | 13 +++++++++++-
 drivers/gpu/drm/i915/display/intel_hdmi.c     | 20 ++++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_vbt_defs.h |  4 ++++
 3 files changed, 35 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c
index 4cc949b228f2..9dc67c03ffc0 100644
--- a/drivers/gpu/drm/i915/display/intel_bios.c
+++ b/drivers/gpu/drm/i915/display/intel_bios.c
@@ -1623,12 +1623,23 @@ static const u8 icp_ddc_pin_map[] = {
 	[TGL_DDC_BUS_PORT_6] = GMBUS_PIN_14_TC6_TGP,
 };
 
+static const u8 adls_ddc_pin_map[] = {
+	[ICL_DDC_BUS_DDI_A] = GMBUS_PIN_1_BXT,
+	[ADLS_DDC_BUS_PORT_TC1] = GMBUS_PIN_9_TC1_ICP,
+	[ADLS_DDC_BUS_PORT_TC2] = GMBUS_PIN_10_TC2_ICP,
+	[ADLS_DDC_BUS_PORT_TC3] = GMBUS_PIN_11_TC3_ICP,
+	[ADLS_DDC_BUS_PORT_TC4] = GMBUS_PIN_12_TC4_ICP,
+};
+
 static u8 map_ddc_pin(struct drm_i915_private *dev_priv, u8 vbt_pin)
 {
 	const u8 *ddc_pin_map;
 	int n_entries;
 
-	if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1) {
+	if (HAS_PCH_ADP(dev_priv)) {
+		ddc_pin_map = adls_ddc_pin_map;
+		n_entries = ARRAY_SIZE(adls_ddc_pin_map);
+	} else if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1) {
 		return vbt_pin;
 	} else if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP) {
 		ddc_pin_map = icp_ddc_pin_map;
diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index e10fdb369daa..060a13b63aa9 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -3135,6 +3135,22 @@ static u8 dg1_port_to_ddc_pin(struct drm_i915_private *dev_priv, enum port port)
 	return intel_port_to_phy(dev_priv, port) + 1;
 }
 
+static u8 adls_port_to_ddc_pin(struct drm_i915_private *dev_priv, enum port port)
+{
+	enum phy phy = intel_port_to_phy(dev_priv, port);
+
+	WARN_ON(port == PORT_B || port == PORT_C);
+
+	/*
+	 * Pin mapping for ADL-S requires TC pins for all combo phy outputs
+	 * except first combo output.
+	 */
+	if (IS_ALDERLAKE_S(dev_priv) && phy >= PHY_B)
+		return GMBUS_PIN_9_TC1_ICP + phy - PHY_B;
+
+	return GMBUS_PIN_1_BXT + phy;
+}
+
 static u8 g4x_port_to_ddc_pin(struct drm_i915_private *dev_priv,
 			      enum port port)
 {
@@ -3172,7 +3188,9 @@ static u8 intel_hdmi_ddc_pin(struct intel_encoder *encoder)
 		return ddc_pin;
 	}
 
-	if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1)
+	if (IS_ALDERLAKE_S(dev_priv))
+		ddc_pin = adls_port_to_ddc_pin(dev_priv, port);
+	else if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1)
 		ddc_pin = dg1_port_to_ddc_pin(dev_priv, port);
 	else if (IS_ROCKETLAKE(dev_priv))
 		ddc_pin = rkl_port_to_ddc_pin(dev_priv, port);
diff --git a/drivers/gpu/drm/i915/display/intel_vbt_defs.h b/drivers/gpu/drm/i915/display/intel_vbt_defs.h
index 49b4b5fca941..32d1b4f05760 100644
--- a/drivers/gpu/drm/i915/display/intel_vbt_defs.h
+++ b/drivers/gpu/drm/i915/display/intel_vbt_defs.h
@@ -325,6 +325,10 @@ enum vbt_gmbus_ddi {
 	ICL_DDC_BUS_PORT_4,
 	TGL_DDC_BUS_PORT_5,
 	TGL_DDC_BUS_PORT_6,
+	ADLS_DDC_BUS_PORT_TC1 = 0x2,
+	ADLS_DDC_BUS_PORT_TC2,
+	ADLS_DDC_BUS_PORT_TC3,
+	ADLS_DDC_BUS_PORT_TC4
 };
 
 #define DP_AUX_A 0x40
-- 
2.27.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2020-12-05  1:09 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-05  1:08 [Intel-gfx] [PATCH 00/22] Introduce Alderlake-S Aditya Swarup
2020-12-05  1:08 ` [Intel-gfx] [PATCH 01/22] drm/i915/tgl: Fix REVID macros for TGL to fetch correct stepping Aditya Swarup
2020-12-05  1:08 ` [Intel-gfx] [PATCH 02/22] drm/i915/tgl: Add bound checks and simplify TGL REVID macros Aditya Swarup
2020-12-05  1:08 ` [Intel-gfx] [PATCH 03/22] drm/i915/adl_s: Add ADL-S platform info and PCI ids Aditya Swarup
2021-01-05 21:04   ` Souza, Jose
2020-12-05  1:08 ` [Intel-gfx] [PATCH 04/22] x86/gpu: add ADL_S stolen memory support Aditya Swarup
2020-12-05  1:08 ` [Intel-gfx] [PATCH 05/22] drm/i915/adl_s: Add PCH support Aditya Swarup
2020-12-05  1:08 ` [Intel-gfx] [PATCH 06/22] drm/i915/adl_s: Add Interrupt Support Aditya Swarup
2020-12-05  1:08 ` [Intel-gfx] [PATCH 07/22] drm/i915/adl_s: Add PHYs for Alderlake S Aditya Swarup
2021-01-12  3:33   ` Matt Roper
2020-12-05  1:08 ` [Intel-gfx] [PATCH 08/22] drm/i915/adl_s: Configure DPLL for ADL-S Aditya Swarup
2021-01-12  3:47   ` Matt Roper
2020-12-05  1:08 ` [Intel-gfx] [PATCH 09/22] drm/i915/adl_s: Configure Port clock registers " Aditya Swarup
2021-01-12 23:47   ` Matt Roper
2020-12-05  1:08 ` [Intel-gfx] [PATCH 10/22] drm/i915/adl_s: Initialize display " Aditya Swarup
2021-01-12  3:54   ` Matt Roper
2020-12-05  1:08 ` Aditya Swarup [this message]
2021-01-12  4:19   ` [Intel-gfx] [PATCH 11/22] drm/i915/adl_s: Add adl-s ddc pin mapping Matt Roper
2020-12-05  1:08 ` [Intel-gfx] [PATCH 12/22] drm/i915/adl_s: Add vbt port and aux channel settings for adls Aditya Swarup
2021-01-12  4:05   ` Matt Roper
2020-12-05  1:08 ` [Intel-gfx] [PATCH 13/22] drm/i915/adl_s: Update combo PHY master/slave relationships Aditya Swarup
2020-12-05  1:08 ` [Intel-gfx] [PATCH 14/22] drm/i915/adl_s: Update PHY_MISC programming Aditya Swarup
2020-12-05  1:08 ` [Intel-gfx] [PATCH 15/22] drm/i915/adl_s: Add display WAs for ADL-S Aditya Swarup
2020-12-05  1:08 ` [Intel-gfx] [PATCH 16/22] drm/i915/adl_s: Add GT and CTX " Aditya Swarup
2020-12-05  1:08 ` [Intel-gfx] [PATCH 17/22] drm/i915/adl_s: MCHBAR memory info registers are moved Aditya Swarup
2021-01-27 14:29   ` Lucas De Marchi
2020-12-05  1:08 ` [Intel-gfx] [PATCH 18/22] drm/i915/adl_s: Add power wells Aditya Swarup
2020-12-05  1:08 ` [Intel-gfx] [PATCH 19/22] drm/i915/adl_s: Re-use TGL GuC/HuC firmware Aditya Swarup
2020-12-05  1:08 ` [Intel-gfx] [PATCH 20/22] drm/i915/display: Add HAS_D12_PLANE_MINIMIZATION Aditya Swarup
2020-12-05  1:08 ` [Intel-gfx] [PATCH 21/22] drm/i915/adl_s: Load DMC Aditya Swarup
2020-12-05  1:08 ` [Intel-gfx] [PATCH 22/22] drm/i915/adl_s: Update memory bandwidth parameters Aditya Swarup
2020-12-05  1:20 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Introduce Alderlake-S (rev3) Patchwork
2020-12-05  1:22 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-12-05  1:51 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-12-05  5:22 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2021-01-21 10:40 ` [Intel-gfx] [PATCH 00/22] Introduce Alderlake-S Jani Nikula

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201205010844.361880-12-aditya.swarup@intel.com \
    --to=aditya.swarup@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    --cc=lucas.demarchi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.