[PATCH v3 0/6] imx8mq: updates for the interconnect fabric

[PATCH v3 0/6] imx8mq: updates for the interconnect fabric

[Martin Kepplinger]

revision history:
v3: (thanks Krysztof and Georgi)
 * drop the defconfig cycling patch and fix the interconnect enable config
 * add the noc node to imx8mq only and use correct properties
 * add missing signed-off-by

v2: (thanks Lucas)
 * reorder and clean up defconfig changes
 * use "dram" for the interconnect path name and document it
 * https://lore.kernel.org/linux-arm-kernel/20201201123932.12312-1-martin.kepplinger@puri.sm/T/#t

v1:
 * link: https://lore.kernel.org/linux-arm-kernel/20201201100124.4676-1-martin.kepplinger@puri.sm/T/

thanks,
                        martin

Leonard Crestez (1):
  arm64: dts: imx8mq: Add NOC node

Martin Kepplinger (5):
  arm64: dts: imx8mq: Add interconnect provider property
  arm64: dts: imx8mq: Add interconnect for lcdif
  dt-bindings: mxsfb: Add interconnect bindings for LCDIF path
  interconnect: imx8mq: Use icc_sync_state
  arm64: defconfig: Enable interconnect for imx8mq

 .../devicetree/bindings/display/mxsfb.txt     |  6 +++++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi     | 26 +++++++++++++++++++
 arch/arm64/configs/defconfig                  |  2 ++
 drivers/interconnect/imx/imx8mq.c             |  2 ++
 4 files changed, 36 insertions(+)

-- 
2.20.1

[PATCH v3 0/6] imx8mq: updates for the interconnect fabric

[Martin Kepplinger]

revision history:
v3: (thanks Krysztof and Georgi)
 * drop the defconfig cycling patch and fix the interconnect enable config
 * add the noc node to imx8mq only and use correct properties
 * add missing signed-off-by

v2: (thanks Lucas)
 * reorder and clean up defconfig changes
 * use "dram" for the interconnect path name and document it
 * https://lore.kernel.org/linux-arm-kernel/20201201123932.12312-1-martin.kepplinger@puri.sm/T/#t

v1:
 * link: https://lore.kernel.org/linux-arm-kernel/20201201100124.4676-1-martin.kepplinger@puri.sm/T/

thanks,
                        martin

Leonard Crestez (1):
  arm64: dts: imx8mq: Add NOC node

Martin Kepplinger (5):
  arm64: dts: imx8mq: Add interconnect provider property
  arm64: dts: imx8mq: Add interconnect for lcdif
  dt-bindings: mxsfb: Add interconnect bindings for LCDIF path
  interconnect: imx8mq: Use icc_sync_state
  arm64: defconfig: Enable interconnect for imx8mq

 .../devicetree/bindings/display/mxsfb.txt     |  6 +++++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi     | 26 +++++++++++++++++++
 arch/arm64/configs/defconfig                  |  2 ++
 drivers/interconnect/imx/imx8mq.c             |  2 ++
 4 files changed, 36 insertions(+)

-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 1/6] arm64: dts: imx8mq: Add NOC node

[Martin Kepplinger]

From: Leonard Crestez <leonard.crestez@nxp.com>

Add initial support for dynamic frequency scaling of the main NOC
on imx8mq.

Make DDRC the parent of the NOC (using passive governor) so that the
main NOC is automatically scaled together with DDRC by default.

Support for proactive scaling via interconnect will come on top.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index a841a023e8e0..9c9d68a14e69 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1158,6 +1158,28 @@
 			};
 		};
 
+		noc: interconnect@32700000 {
+			compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc";
+			reg = <0x32700000 0x100000>;
+			clocks = <&clk IMX8MQ_CLK_NOC>;
+			fsl,ddrc = <&ddrc>;
+			operating-points-v2 = <&noc_opp_table>;
+
+			noc_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-133M {
+					opp-hz = /bits/ 64 <133333333>;
+				};
+				opp-400M {
+					opp-hz = /bits/ 64 <400000000>;
+				};
+				opp-800M {
+					opp-hz = /bits/ 64 <800000000>;
+				};
+			};
+		};
+
 		bus@32c00000 { /* AIPS4 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			reg = <0x32c00000 0x400000>;
-- 
2.20.1

[PATCH v3 1/6] arm64: dts: imx8mq: Add NOC node

[Martin Kepplinger]

From: Leonard Crestez <leonard.crestez@nxp.com>

Add initial support for dynamic frequency scaling of the main NOC
on imx8mq.

Make DDRC the parent of the NOC (using passive governor) so that the
main NOC is automatically scaled together with DDRC by default.

Support for proactive scaling via interconnect will come on top.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index a841a023e8e0..9c9d68a14e69 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1158,6 +1158,28 @@
 			};
 		};
 
+		noc: interconnect@32700000 {
+			compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc";
+			reg = <0x32700000 0x100000>;
+			clocks = <&clk IMX8MQ_CLK_NOC>;
+			fsl,ddrc = <&ddrc>;
+			operating-points-v2 = <&noc_opp_table>;
+
+			noc_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-133M {
+					opp-hz = /bits/ 64 <133333333>;
+				};
+				opp-400M {
+					opp-hz = /bits/ 64 <400000000>;
+				};
+				opp-800M {
+					opp-hz = /bits/ 64 <800000000>;
+				};
+			};
+		};
+
 		bus@32c00000 { /* AIPS4 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			reg = <0x32c00000 0x400000>;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 1/6] arm64: dts: imx8mq: Add NOC node

[Georgi Djakov]

On 12/10/20 12:09, Martin Kepplinger wrote:
> From: Leonard Crestez <leonard.crestez@nxp.com>
> 
> Add initial support for dynamic frequency scaling of the main NOC
> on imx8mq.
> 
> Make DDRC the parent of the NOC (using passive governor) so that the
> main NOC is automatically scaled together with DDRC by default.
> 
> Support for proactive scaling via interconnect will come on top.
> 
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>

Acked-by: Georgi Djakov <georgi.djakov@linaro.org>

> ---
>   arch/arm64/boot/dts/freescale/imx8mq.dtsi | 22 ++++++++++++++++++++++
>   1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index a841a023e8e0..9c9d68a14e69 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -1158,6 +1158,28 @@
>   			};
>   		};
>   
> +		noc: interconnect@32700000 {
> +			compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc";
> +			reg = <0x32700000 0x100000>;
> +			clocks = <&clk IMX8MQ_CLK_NOC>;
> +			fsl,ddrc = <&ddrc>;
> +			operating-points-v2 = <&noc_opp_table>;
> +
> +			noc_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-133M {
> +					opp-hz = /bits/ 64 <133333333>;
> +				};
> +				opp-400M {
> +					opp-hz = /bits/ 64 <400000000>;
> +				};
> +				opp-800M {
> +					opp-hz = /bits/ 64 <800000000>;
> +				};
> +			};
> +		};
> +
>   		bus@32c00000 { /* AIPS4 */
>   			compatible = "fsl,aips-bus", "simple-bus";
>   			reg = <0x32c00000 0x400000>;
> 

Re: [PATCH v3 1/6] arm64: dts: imx8mq: Add NOC node

[Georgi Djakov]

On 12/10/20 12:09, Martin Kepplinger wrote:
> From: Leonard Crestez <leonard.crestez@nxp.com>
> 
> Add initial support for dynamic frequency scaling of the main NOC
> on imx8mq.
> 
> Make DDRC the parent of the NOC (using passive governor) so that the
> main NOC is automatically scaled together with DDRC by default.
> 
> Support for proactive scaling via interconnect will come on top.
> 
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>

Acked-by: Georgi Djakov <georgi.djakov@linaro.org>

> ---
>   arch/arm64/boot/dts/freescale/imx8mq.dtsi | 22 ++++++++++++++++++++++
>   1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index a841a023e8e0..9c9d68a14e69 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -1158,6 +1158,28 @@
>   			};
>   		};
>   
> +		noc: interconnect@32700000 {
> +			compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc";
> +			reg = <0x32700000 0x100000>;
> +			clocks = <&clk IMX8MQ_CLK_NOC>;
> +			fsl,ddrc = <&ddrc>;
> +			operating-points-v2 = <&noc_opp_table>;
> +
> +			noc_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-133M {
> +					opp-hz = /bits/ 64 <133333333>;
> +				};
> +				opp-400M {
> +					opp-hz = /bits/ 64 <400000000>;
> +				};
> +				opp-800M {
> +					opp-hz = /bits/ 64 <800000000>;
> +				};
> +			};
> +		};
> +
>   		bus@32c00000 { /* AIPS4 */
>   			compatible = "fsl,aips-bus", "simple-bus";
>   			reg = <0x32c00000 0x400000>;
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 1/6] arm64: dts: imx8mq: Add NOC node

[Shawn Guo]

On Thu, Dec 10, 2020 at 11:09:01AM +0100, Martin Kepplinger wrote:
> From: Leonard Crestez <leonard.crestez@nxp.com>
> 
> Add initial support for dynamic frequency scaling of the main NOC
> on imx8mq.
> 
> Make DDRC the parent of the NOC (using passive governor) so that the
> main NOC is automatically scaled together with DDRC by default.
> 
> Support for proactive scaling via interconnect will come on top.
> 
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> ---
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index a841a023e8e0..9c9d68a14e69 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -1158,6 +1158,28 @@
>  			};
>  		};
>  
> +		noc: interconnect@32700000 {
> +			compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc";
> +			reg = <0x32700000 0x100000>;
> +			clocks = <&clk IMX8MQ_CLK_NOC>;
> +			fsl,ddrc = <&ddrc>;
> +			operating-points-v2 = <&noc_opp_table>;
> +
> +			noc_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-133M {
> +					opp-hz = /bits/ 64 <133333333>;
> +				};

Please have a newline between nodes.

Shawn

> +				opp-400M {
> +					opp-hz = /bits/ 64 <400000000>;
> +				};
> +				opp-800M {
> +					opp-hz = /bits/ 64 <800000000>;
> +				};
> +			};
> +		};
> +
>  		bus@32c00000 { /* AIPS4 */
>  			compatible = "fsl,aips-bus", "simple-bus";
>  			reg = <0x32c00000 0x400000>;
> -- 
> 2.20.1
> 

Re: [PATCH v3 1/6] arm64: dts: imx8mq: Add NOC node

[Shawn Guo]

On Thu, Dec 10, 2020 at 11:09:01AM +0100, Martin Kepplinger wrote:
> From: Leonard Crestez <leonard.crestez@nxp.com>
> 
> Add initial support for dynamic frequency scaling of the main NOC
> on imx8mq.
> 
> Make DDRC the parent of the NOC (using passive governor) so that the
> main NOC is automatically scaled together with DDRC by default.
> 
> Support for proactive scaling via interconnect will come on top.
> 
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> ---
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index a841a023e8e0..9c9d68a14e69 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -1158,6 +1158,28 @@
>  			};
>  		};
>  
> +		noc: interconnect@32700000 {
> +			compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc";
> +			reg = <0x32700000 0x100000>;
> +			clocks = <&clk IMX8MQ_CLK_NOC>;
> +			fsl,ddrc = <&ddrc>;
> +			operating-points-v2 = <&noc_opp_table>;
> +
> +			noc_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-133M {
> +					opp-hz = /bits/ 64 <133333333>;
> +				};

Please have a newline between nodes.

Shawn

> +				opp-400M {
> +					opp-hz = /bits/ 64 <400000000>;
> +				};
> +				opp-800M {
> +					opp-hz = /bits/ 64 <800000000>;
> +				};
> +			};
> +		};
> +
>  		bus@32c00000 { /* AIPS4 */
>  			compatible = "fsl,aips-bus", "simple-bus";
>  			reg = <0x32c00000 0x400000>;
> -- 
> 2.20.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 2/6] arm64: dts: imx8mq: Add interconnect provider property

[Martin Kepplinger]

Add #interconnect-cells on main &noc so that it will probe the interconnect
provider.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 9c9d68a14e69..3617b7238952 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1163,6 +1163,7 @@
 			reg = <0x32700000 0x100000>;
 			clocks = <&clk IMX8MQ_CLK_NOC>;
 			fsl,ddrc = <&ddrc>;
+			#interconnect-cells = <1>;
 			operating-points-v2 = <&noc_opp_table>;
 
 			noc_opp_table: opp-table {
-- 
2.20.1

[PATCH v3 2/6] arm64: dts: imx8mq: Add interconnect provider property

[Martin Kepplinger]

Add #interconnect-cells on main &noc so that it will probe the interconnect
provider.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 9c9d68a14e69..3617b7238952 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1163,6 +1163,7 @@
 			reg = <0x32700000 0x100000>;
 			clocks = <&clk IMX8MQ_CLK_NOC>;
 			fsl,ddrc = <&ddrc>;
+			#interconnect-cells = <1>;
 			operating-points-v2 = <&noc_opp_table>;
 
 			noc_opp_table: opp-table {
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 2/6] arm64: dts: imx8mq: Add interconnect provider property

[Georgi Djakov]

On 12/10/20 12:09, Martin Kepplinger wrote:
> Add #interconnect-cells on main &noc so that it will probe the interconnect
> provider.
> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>

Acked-by: Georgi Djakov <georgi.djakov@linaro.org>

> ---
>   arch/arm64/boot/dts/freescale/imx8mq.dtsi | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index 9c9d68a14e69..3617b7238952 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -1163,6 +1163,7 @@
>   			reg = <0x32700000 0x100000>;
>   			clocks = <&clk IMX8MQ_CLK_NOC>;
>   			fsl,ddrc = <&ddrc>;
> +			#interconnect-cells = <1>;
>   			operating-points-v2 = <&noc_opp_table>;
>   
>   			noc_opp_table: opp-table {
> 

Re: [PATCH v3 2/6] arm64: dts: imx8mq: Add interconnect provider property

[Georgi Djakov]

On 12/10/20 12:09, Martin Kepplinger wrote:
> Add #interconnect-cells on main &noc so that it will probe the interconnect
> provider.
> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>

Acked-by: Georgi Djakov <georgi.djakov@linaro.org>

> ---
>   arch/arm64/boot/dts/freescale/imx8mq.dtsi | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index 9c9d68a14e69..3617b7238952 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -1163,6 +1163,7 @@
>   			reg = <0x32700000 0x100000>;
>   			clocks = <&clk IMX8MQ_CLK_NOC>;
>   			fsl,ddrc = <&ddrc>;
> +			#interconnect-cells = <1>;
>   			operating-points-v2 = <&noc_opp_table>;
>   
>   			noc_opp_table: opp-table {
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 3/6] arm64: dts: imx8mq: Add interconnect for lcdif

[Martin Kepplinger]

Add interconnect ports for lcdif to set bus capabilities.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 3617b7238952..7c4b68bda6fa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -11,6 +11,7 @@
 #include "dt-bindings/input/input.h"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interconnect/imx8mq.h>
 #include "imx8mq-pinfunc.h"
 
 / {
@@ -522,6 +523,8 @@
 						  <&clk IMX8MQ_VIDEO_PLL1>,
 						  <&clk IMX8MQ_VIDEO_PLL1_OUT>;
 				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
+				interconnects = <&noc IMX8MQ_ICM_LCDIF &noc IMX8MQ_ICS_DRAM>;
+				interconnect-names = "dram";
 				status = "disabled";
 
 				port@0 {
-- 
2.20.1

[PATCH v3 3/6] arm64: dts: imx8mq: Add interconnect for lcdif

[Martin Kepplinger]

Add interconnect ports for lcdif to set bus capabilities.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 3617b7238952..7c4b68bda6fa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -11,6 +11,7 @@
 #include "dt-bindings/input/input.h"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interconnect/imx8mq.h>
 #include "imx8mq-pinfunc.h"
 
 / {
@@ -522,6 +523,8 @@
 						  <&clk IMX8MQ_VIDEO_PLL1>,
 						  <&clk IMX8MQ_VIDEO_PLL1_OUT>;
 				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
+				interconnects = <&noc IMX8MQ_ICM_LCDIF &noc IMX8MQ_ICS_DRAM>;
+				interconnect-names = "dram";
 				status = "disabled";
 
 				port@0 {
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 3/6] arm64: dts: imx8mq: Add interconnect for lcdif

[Georgi Djakov]

On 12/10/20 12:09, Martin Kepplinger wrote:
> Add interconnect ports for lcdif to set bus capabilities.
> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> ---
>   arch/arm64/boot/dts/freescale/imx8mq.dtsi | 3 +++
>   1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index 3617b7238952..7c4b68bda6fa 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -11,6 +11,7 @@
>   #include "dt-bindings/input/input.h"
>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>   #include <dt-bindings/thermal/thermal.h>
> +#include <dt-bindings/interconnect/imx8mq.h>
>   #include "imx8mq-pinfunc.h"
>   
>   / {
> @@ -522,6 +523,8 @@
>   						  <&clk IMX8MQ_VIDEO_PLL1>,
>   						  <&clk IMX8MQ_VIDEO_PLL1_OUT>;
>   				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
> +				interconnects = <&noc IMX8MQ_ICM_LCDIF &noc IMX8MQ_ICS_DRAM>;
> +				interconnect-names = "dram";
>   				status = "disabled";
>   
>   				port@0 {
> 

Nit: IMO, the dt-bindings patch (4/6) should come before this one - first
document the DT properties and then use them. Otherwise looks good to me.

Thanks,
Georgi

Re: [PATCH v3 3/6] arm64: dts: imx8mq: Add interconnect for lcdif

[Georgi Djakov]

On 12/10/20 12:09, Martin Kepplinger wrote:
> Add interconnect ports for lcdif to set bus capabilities.
> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> ---
>   arch/arm64/boot/dts/freescale/imx8mq.dtsi | 3 +++
>   1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index 3617b7238952..7c4b68bda6fa 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -11,6 +11,7 @@
>   #include "dt-bindings/input/input.h"
>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>   #include <dt-bindings/thermal/thermal.h>
> +#include <dt-bindings/interconnect/imx8mq.h>
>   #include "imx8mq-pinfunc.h"
>   
>   / {
> @@ -522,6 +523,8 @@
>   						  <&clk IMX8MQ_VIDEO_PLL1>,
>   						  <&clk IMX8MQ_VIDEO_PLL1_OUT>;
>   				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
> +				interconnects = <&noc IMX8MQ_ICM_LCDIF &noc IMX8MQ_ICS_DRAM>;
> +				interconnect-names = "dram";
>   				status = "disabled";
>   
>   				port@0 {
> 

Nit: IMO, the dt-bindings patch (4/6) should come before this one - first
document the DT properties and then use them. Otherwise looks good to me.

Thanks,
Georgi

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 4/6] dt-bindings: mxsfb: Add interconnect bindings for LCDIF path

[Martin Kepplinger]

Add optional interconnect properties for the dram path requests.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 Documentation/devicetree/bindings/display/mxsfb.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/mxsfb.txt b/Documentation/devicetree/bindings/display/mxsfb.txt
index c985871c46b3..d494a2674290 100644
--- a/Documentation/devicetree/bindings/display/mxsfb.txt
+++ b/Documentation/devicetree/bindings/display/mxsfb.txt
@@ -15,6 +15,12 @@ Required properties:
     - "pix" for the LCDIF block clock
     - (MX6SX-only) "axi", "disp_axi" for the bus interface clock
 
+Optional properties:
+- interconnects : interconnect path specifier for LCDIF according to
+		Documentation/devicetree/bindings/interconnect/interconnect.txt.
+- interconnect-names: the name describing the interconnect path.
+		Should be "dram" for i.MX8MQ.
+
 Required sub-nodes:
   - port: The connection to an encoder chip.
 
-- 
2.20.1

[PATCH v3 4/6] dt-bindings: mxsfb: Add interconnect bindings for LCDIF path

[Martin Kepplinger]

Add optional interconnect properties for the dram path requests.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 Documentation/devicetree/bindings/display/mxsfb.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/mxsfb.txt b/Documentation/devicetree/bindings/display/mxsfb.txt
index c985871c46b3..d494a2674290 100644
--- a/Documentation/devicetree/bindings/display/mxsfb.txt
+++ b/Documentation/devicetree/bindings/display/mxsfb.txt
@@ -15,6 +15,12 @@ Required properties:
     - "pix" for the LCDIF block clock
     - (MX6SX-only) "axi", "disp_axi" for the bus interface clock
 
+Optional properties:
+- interconnects : interconnect path specifier for LCDIF according to
+		Documentation/devicetree/bindings/interconnect/interconnect.txt.
+- interconnect-names: the name describing the interconnect path.
+		Should be "dram" for i.MX8MQ.
+
 Required sub-nodes:
   - port: The connection to an encoder chip.
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 5/6] interconnect: imx8mq: Use icc_sync_state

[Martin Kepplinger]

Add the icc_sync_state callback to notify the framework when consumers
are probed and the bandwidth doesn't have to be kept at maximum anymore.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Suggested-by: Georgi Djakov <georgi.djakov@linaro.org>
---
 drivers/interconnect/imx/imx8mq.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/interconnect/imx/imx8mq.c b/drivers/interconnect/imx/imx8mq.c
index ba43a15aefec..d7768d3c6d8a 100644
--- a/drivers/interconnect/imx/imx8mq.c
+++ b/drivers/interconnect/imx/imx8mq.c
@@ -7,6 +7,7 @@
 
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/interconnect-provider.h>
 #include <dt-bindings/interconnect/imx8mq.h>
 
 #include "imx.h"
@@ -94,6 +95,7 @@ static struct platform_driver imx8mq_icc_driver = {
 	.remove = imx8mq_icc_remove,
 	.driver = {
 		.name = "imx8mq-interconnect",
+		.sync_state = icc_sync_state,
 	},
 };
 
-- 
2.20.1

[PATCH v3 5/6] interconnect: imx8mq: Use icc_sync_state

[Martin Kepplinger]

Add the icc_sync_state callback to notify the framework when consumers
are probed and the bandwidth doesn't have to be kept at maximum anymore.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Suggested-by: Georgi Djakov <georgi.djakov@linaro.org>
---
 drivers/interconnect/imx/imx8mq.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/interconnect/imx/imx8mq.c b/drivers/interconnect/imx/imx8mq.c
index ba43a15aefec..d7768d3c6d8a 100644
--- a/drivers/interconnect/imx/imx8mq.c
+++ b/drivers/interconnect/imx/imx8mq.c
@@ -7,6 +7,7 @@
 
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/interconnect-provider.h>
 #include <dt-bindings/interconnect/imx8mq.h>
 
 #include "imx.h"
@@ -94,6 +95,7 @@ static struct platform_driver imx8mq_icc_driver = {
 	.remove = imx8mq_icc_remove,
 	.driver = {
 		.name = "imx8mq-interconnect",
+		.sync_state = icc_sync_state,
 	},
 };
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 6/6] arm64: defconfig: Enable interconnect for imx8mq

[Martin Kepplinger]

Enable INTERCONNECT_IMX8MQ in order to make interconnect more widely
available.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/configs/defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index c8ca76751a34..f25748b0fa95 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1074,6 +1074,8 @@ CONFIG_SLIM_QCOM_CTRL=m
 CONFIG_SLIM_QCOM_NGD_CTRL=m
 CONFIG_MUX_MMIO=y
 CONFIG_INTERCONNECT=y
+CONFIG_INTERCONNECT_IMX=m
+CONFIG_INTERCONNECT_IMX8MQ=m
 CONFIG_INTERCONNECT_QCOM=y
 CONFIG_INTERCONNECT_QCOM_MSM8916=m
 CONFIG_INTERCONNECT_QCOM_OSM_L3=m
-- 
2.20.1

[PATCH v3 6/6] arm64: defconfig: Enable interconnect for imx8mq

[Martin Kepplinger]

Enable INTERCONNECT_IMX8MQ in order to make interconnect more widely
available.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/configs/defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index c8ca76751a34..f25748b0fa95 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1074,6 +1074,8 @@ CONFIG_SLIM_QCOM_CTRL=m
 CONFIG_SLIM_QCOM_NGD_CTRL=m
 CONFIG_MUX_MMIO=y
 CONFIG_INTERCONNECT=y
+CONFIG_INTERCONNECT_IMX=m
+CONFIG_INTERCONNECT_IMX8MQ=m
 CONFIG_INTERCONNECT_QCOM=y
 CONFIG_INTERCONNECT_QCOM_MSM8916=m
 CONFIG_INTERCONNECT_QCOM_OSM_L3=m
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 6/6] arm64: defconfig: Enable interconnect for imx8mq

[Georgi Djakov]

On 12/10/20 12:09, Martin Kepplinger wrote:
> Enable INTERCONNECT_IMX8MQ in order to make interconnect more widely
> available.
> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>

Acked-by: Georgi Djakov <georgi.djakov@linaro.org>

> ---
>   arch/arm64/configs/defconfig | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index c8ca76751a34..f25748b0fa95 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -1074,6 +1074,8 @@ CONFIG_SLIM_QCOM_CTRL=m
>   CONFIG_SLIM_QCOM_NGD_CTRL=m
>   CONFIG_MUX_MMIO=y
>   CONFIG_INTERCONNECT=y
> +CONFIG_INTERCONNECT_IMX=m
> +CONFIG_INTERCONNECT_IMX8MQ=m
>   CONFIG_INTERCONNECT_QCOM=y
>   CONFIG_INTERCONNECT_QCOM_MSM8916=m
>   CONFIG_INTERCONNECT_QCOM_OSM_L3=m
> 

Re: [PATCH v3 6/6] arm64: defconfig: Enable interconnect for imx8mq

[Georgi Djakov]

On 12/10/20 12:09, Martin Kepplinger wrote:
> Enable INTERCONNECT_IMX8MQ in order to make interconnect more widely
> available.
> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>

Acked-by: Georgi Djakov <georgi.djakov@linaro.org>

> ---
>   arch/arm64/configs/defconfig | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index c8ca76751a34..f25748b0fa95 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -1074,6 +1074,8 @@ CONFIG_SLIM_QCOM_CTRL=m
>   CONFIG_SLIM_QCOM_NGD_CTRL=m
>   CONFIG_MUX_MMIO=y
>   CONFIG_INTERCONNECT=y
> +CONFIG_INTERCONNECT_IMX=m
> +CONFIG_INTERCONNECT_IMX8MQ=m
>   CONFIG_INTERCONNECT_QCOM=y
>   CONFIG_INTERCONNECT_QCOM_MSM8916=m
>   CONFIG_INTERCONNECT_QCOM_OSM_L3=m
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel