* [PATCH v5 00/15] pinctrl: add BCM63XX pincontrol support
@ 2021-03-06 15:56 ` Álvaro Fernández Rojas
0 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:56 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
First of all, I've based this on the patches sent by Jonas Gorski back in
2016:
https://www.spinics.net/lists/linux-gpio/msg15983.html
http://patchwork.ozlabs.org/project/linux-gpio/patch/1471604025-21575-2-git-send-email-jonas.gorski@gmail.com/
I've tried to address all coments from Linus Walleij, but I know that
this may still need some other modifications
This patchset adds appropriate binding documentation and drivers for
pin controller cores found in the BCM63XX MIPS SoCs currently supported.
While the GPIO part is always the same, the pinmux part varies quite a
lot between different SoCs. Sometimes they have defined groups which
can be muxed into different functions, sometimes each function has a
different group. Sometimes you can mux individual pins. Often it is a
combination of single pins and groups.
Some core versions require the GPIO direction to be set according to the
function, most do not. Sometimes the mux register(s) contain bits for
unrelated other functions.
v5: introduce changes suggested by Andy Shevchenko.
v4: fix gpiochip_irqchip_add_domain(), remove IRQ Kconfig selections and add
missing of_node_put().
v3: introduce new files for shared code and add more changes suggested by
Linus Walleij. Also add a new patch needed for properly parsing gpio-ranges.
v2: introduce changes suggested by Linus Walleij and remove interrupts
- In order to use GPIO_REGMAP, the need to get gpio_chip from gpio_regmap
and use it for pinctrl_add_gpio_range() and gpio_chip.direction_input()
and gpio_chip.direction_output().
Álvaro Fernández Rojas (15):
gpio: guard gpiochip_irqchip_add_domain() with GPIOLIB_IRQCHIP
gpio: regmap: set gpio_chip of_node
pinctrl: bcm: add bcm63xx base code
dt-bindings: add BCM6328 pincontroller binding documentation
pinctrl: add a pincontrol driver for BCM6328
dt-bindings: add BCM6358 pincontroller binding documentation
pinctrl: add a pincontrol driver for BCM6358
dt-bindings: add BCM6362 pincontroller binding documentation
pinctrl: add a pincontrol driver for BCM6362
dt-bindings: add BCM6368 pincontroller binding documentation
pinctrl: add a pincontrol driver for BCM6368
dt-bindings: add BCM63268 pincontroller binding documentation
pinctrl: add a pincontrol driver for BCM63268
dt-bindings: add BCM6318 pincontroller binding documentation
pinctrl: add a pincontrol driver for BCM6318
.../pinctrl/brcm,bcm6318-pinctrl.yaml | 187 +++++
.../pinctrl/brcm,bcm63268-pinctrl.yaml | 208 ++++++
.../pinctrl/brcm,bcm6328-pinctrl.yaml | 171 +++++
.../pinctrl/brcm,bcm6358-pinctrl.yaml | 137 ++++
.../pinctrl/brcm,bcm6362-pinctrl.yaml | 250 +++++++
.../pinctrl/brcm,bcm6368-pinctrl.yaml | 261 +++++++
drivers/gpio/gpio-regmap.c | 4 +
drivers/pinctrl/bcm/Kconfig | 55 ++
drivers/pinctrl/bcm/Makefile | 7 +
drivers/pinctrl/bcm/pinctrl-bcm6318.c | 498 ++++++++++++++
drivers/pinctrl/bcm/pinctrl-bcm63268.c | 643 ++++++++++++++++++
drivers/pinctrl/bcm/pinctrl-bcm6328.c | 404 +++++++++++
drivers/pinctrl/bcm/pinctrl-bcm6358.c | 369 ++++++++++
drivers/pinctrl/bcm/pinctrl-bcm6362.c | 617 +++++++++++++++++
drivers/pinctrl/bcm/pinctrl-bcm6368.c | 523 ++++++++++++++
drivers/pinctrl/bcm/pinctrl-bcm63xx.c | 112 +++
drivers/pinctrl/bcm/pinctrl-bcm63xx.h | 43 ++
include/linux/gpio/driver.h | 9 +
include/linux/gpio/regmap.h | 3 +
19 files changed, 4501 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6318.c
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63268.c
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6328.c
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6358.c
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6362.c
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6368.c
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63xx.c
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63xx.h
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH v5 01/15] gpio: guard gpiochip_irqchip_add_domain() with GPIOLIB_IRQCHIP
2021-03-06 15:56 ` Álvaro Fernández Rojas
@ 2021-03-06 15:56 ` Álvaro Fernández Rojas
-1 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:56 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
The current code doesn't check if GPIOLIB_IRQCHIP is enabled, which results in
a compilation error when trying to build gpio-regmap if CONFIG_GPIOLIB_IRQCHIP
isn't enabled.
Fixes: 6a45b0e2589f ("gpiolib: Introduce gpiochip_irqchip_add_domain()")
Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: add missing Suggested-by tag
v4: add patch (fix include instead of gpio-regmap.c)
include/linux/gpio/driver.h | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index 286de0520574..ecf0032a0995 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -624,8 +624,17 @@ void gpiochip_irq_domain_deactivate(struct irq_domain *domain,
bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gc,
unsigned int offset);
+#ifdef CONFIG_GPIOLIB_IRQCHIP
int gpiochip_irqchip_add_domain(struct gpio_chip *gc,
struct irq_domain *domain);
+#else
+static inline int gpiochip_irqchip_add_domain(struct gpio_chip *gc,
+ struct irq_domain *domain)
+{
+ WARN_ON(1);
+ return -EINVAL;
+}
+#endif
int gpiochip_generic_request(struct gpio_chip *gc, unsigned int offset);
void gpiochip_generic_free(struct gpio_chip *gc, unsigned int offset);
--
2.20.1
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v5 01/15] gpio: guard gpiochip_irqchip_add_domain() with GPIOLIB_IRQCHIP
@ 2021-03-06 15:56 ` Álvaro Fernández Rojas
0 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:56 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
The current code doesn't check if GPIOLIB_IRQCHIP is enabled, which results in
a compilation error when trying to build gpio-regmap if CONFIG_GPIOLIB_IRQCHIP
isn't enabled.
Fixes: 6a45b0e2589f ("gpiolib: Introduce gpiochip_irqchip_add_domain()")
Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: add missing Suggested-by tag
v4: add patch (fix include instead of gpio-regmap.c)
include/linux/gpio/driver.h | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index 286de0520574..ecf0032a0995 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -624,8 +624,17 @@ void gpiochip_irq_domain_deactivate(struct irq_domain *domain,
bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gc,
unsigned int offset);
+#ifdef CONFIG_GPIOLIB_IRQCHIP
int gpiochip_irqchip_add_domain(struct gpio_chip *gc,
struct irq_domain *domain);
+#else
+static inline int gpiochip_irqchip_add_domain(struct gpio_chip *gc,
+ struct irq_domain *domain)
+{
+ WARN_ON(1);
+ return -EINVAL;
+}
+#endif
int gpiochip_generic_request(struct gpio_chip *gc, unsigned int offset);
void gpiochip_generic_free(struct gpio_chip *gc, unsigned int offset);
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 47+ messages in thread* Re: [PATCH v5 01/15] gpio: guard gpiochip_irqchip_add_domain() with GPIOLIB_IRQCHIP
2021-03-06 15:56 ` Álvaro Fernández Rojas
@ 2021-03-09 23:08 ` Michael Walle
-1 siblings, 0 replies; 47+ messages in thread
From: Michael Walle @ 2021-03-09 23:08 UTC (permalink / raw)
To: Álvaro Fernández Rojas
Cc: Linus Walleij, Rob Herring, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Necip Fazil Yildiran, Andy Shevchenko, linux-gpio, devicetree,
linux-kernel, linux-arm-kernel
Am 2021-03-06 16:56, schrieb Álvaro Fernández Rojas:
> The current code doesn't check if GPIOLIB_IRQCHIP is enabled, which
> results in
> a compilation error when trying to build gpio-regmap if
> CONFIG_GPIOLIB_IRQCHIP
> isn't enabled.
>
> Fixes: 6a45b0e2589f ("gpiolib: Introduce
> gpiochip_irqchip_add_domain()")
> Suggested-by: Michael Walle <michael@walle.cc>
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Thanks!
-michael
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [PATCH v5 01/15] gpio: guard gpiochip_irqchip_add_domain() with GPIOLIB_IRQCHIP
@ 2021-03-09 23:08 ` Michael Walle
0 siblings, 0 replies; 47+ messages in thread
From: Michael Walle @ 2021-03-09 23:08 UTC (permalink / raw)
To: Álvaro Fernández Rojas
Cc: Linus Walleij, Rob Herring, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Necip Fazil Yildiran, Andy Shevchenko, linux-gpio, devicetree,
linux-kernel, linux-arm-kernel
Am 2021-03-06 16:56, schrieb Álvaro Fernández Rojas:
> The current code doesn't check if GPIOLIB_IRQCHIP is enabled, which
> results in
> a compilation error when trying to build gpio-regmap if
> CONFIG_GPIOLIB_IRQCHIP
> isn't enabled.
>
> Fixes: 6a45b0e2589f ("gpiolib: Introduce
> gpiochip_irqchip_add_domain()")
> Suggested-by: Michael Walle <michael@walle.cc>
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Thanks!
-michael
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH v5 02/15] gpio: regmap: set gpio_chip of_node
2021-03-06 15:56 ` Álvaro Fernández Rojas
@ 2021-03-06 15:56 ` Álvaro Fernández Rojas
-1 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:56 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
This is needed for properly registering GPIO regmap as a child of a regmap
pin controller.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Michael Walle <michael@walle.cc>
---
v5: switch to fwnode
v4: fix documentation
v3: introduce patch needed for properly parsing gpio-range
drivers/gpio/gpio-regmap.c | 4 ++++
include/linux/gpio/regmap.h | 3 +++
2 files changed, 7 insertions(+)
diff --git a/drivers/gpio/gpio-regmap.c b/drivers/gpio/gpio-regmap.c
index 5412cb3b0b2a..626433934d69 100644
--- a/drivers/gpio/gpio-regmap.c
+++ b/drivers/gpio/gpio-regmap.c
@@ -249,6 +249,10 @@ struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config
chip = &gpio->gpio_chip;
chip->parent = config->parent;
+ if (config->fwnode)
+ chip->of_node = to_of_node(config->fwnode);
+ else
+ chip->of_node = dev_of_node(config->parent);
chip->base = -1;
chip->ngpio = config->ngpio;
chip->names = config->names;
diff --git a/include/linux/gpio/regmap.h b/include/linux/gpio/regmap.h
index ad76f3d0a6ba..c12e8d1d171b 100644
--- a/include/linux/gpio/regmap.h
+++ b/include/linux/gpio/regmap.h
@@ -4,6 +4,7 @@
#define _LINUX_GPIO_REGMAP_H
struct device;
+struct fwnode_handle;
struct gpio_regmap;
struct irq_domain;
struct regmap;
@@ -16,6 +17,7 @@ struct regmap;
* @parent: The parent device
* @regmap: The regmap used to access the registers
* given, the name of the device is used
+ * @fwnode: (Optional) The firmware node
* @label: (Optional) Descriptive name for GPIO controller.
* If not given, the name of the device is used.
* @ngpio: Number of GPIOs
@@ -57,6 +59,7 @@ struct regmap;
struct gpio_regmap_config {
struct device *parent;
struct regmap *regmap;
+ struct fwnode_handle *fwnode;
const char *label;
int ngpio;
--
2.20.1
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v5 02/15] gpio: regmap: set gpio_chip of_node
@ 2021-03-06 15:56 ` Álvaro Fernández Rojas
0 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:56 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
This is needed for properly registering GPIO regmap as a child of a regmap
pin controller.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Michael Walle <michael@walle.cc>
---
v5: switch to fwnode
v4: fix documentation
v3: introduce patch needed for properly parsing gpio-range
drivers/gpio/gpio-regmap.c | 4 ++++
include/linux/gpio/regmap.h | 3 +++
2 files changed, 7 insertions(+)
diff --git a/drivers/gpio/gpio-regmap.c b/drivers/gpio/gpio-regmap.c
index 5412cb3b0b2a..626433934d69 100644
--- a/drivers/gpio/gpio-regmap.c
+++ b/drivers/gpio/gpio-regmap.c
@@ -249,6 +249,10 @@ struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config
chip = &gpio->gpio_chip;
chip->parent = config->parent;
+ if (config->fwnode)
+ chip->of_node = to_of_node(config->fwnode);
+ else
+ chip->of_node = dev_of_node(config->parent);
chip->base = -1;
chip->ngpio = config->ngpio;
chip->names = config->names;
diff --git a/include/linux/gpio/regmap.h b/include/linux/gpio/regmap.h
index ad76f3d0a6ba..c12e8d1d171b 100644
--- a/include/linux/gpio/regmap.h
+++ b/include/linux/gpio/regmap.h
@@ -4,6 +4,7 @@
#define _LINUX_GPIO_REGMAP_H
struct device;
+struct fwnode_handle;
struct gpio_regmap;
struct irq_domain;
struct regmap;
@@ -16,6 +17,7 @@ struct regmap;
* @parent: The parent device
* @regmap: The regmap used to access the registers
* given, the name of the device is used
+ * @fwnode: (Optional) The firmware node
* @label: (Optional) Descriptive name for GPIO controller.
* If not given, the name of the device is used.
* @ngpio: Number of GPIOs
@@ -57,6 +59,7 @@ struct regmap;
struct gpio_regmap_config {
struct device *parent;
struct regmap *regmap;
+ struct fwnode_handle *fwnode;
const char *label;
int ngpio;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 47+ messages in thread* Re: [PATCH v5 02/15] gpio: regmap: set gpio_chip of_node
2021-03-06 15:56 ` Álvaro Fernández Rojas
@ 2021-03-06 16:26 ` Andy Shevchenko
-1 siblings, 0 replies; 47+ messages in thread
From: Andy Shevchenko @ 2021-03-06 16:26 UTC (permalink / raw)
To: Álvaro Fernández Rojas
Cc: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Necip Fazil Yildiran, open list:GPIO SUBSYSTEM, devicetree,
Linux Kernel Mailing List, linux-arm Mailing List
On Sat, Mar 6, 2021 at 5:57 PM Álvaro Fernández Rojas <noltari@gmail.com> wrote:
>
> This is needed for properly registering GPIO regmap as a child of a regmap
> pin controller.
Thanks for an update!
...
> chip->parent = config->parent;
> + if (config->fwnode)
This...
> + chip->of_node = to_of_node(config->fwnode);
> + else
> + chip->of_node = dev_of_node(config->parent);
...and these lines are not needed. If there is no of_node in the chip,
the GPIO library will take care of it to be parent's one.
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH v5 02/15] gpio: regmap: set gpio_chip of_node
@ 2021-03-06 16:26 ` Andy Shevchenko
0 siblings, 0 replies; 47+ messages in thread
From: Andy Shevchenko @ 2021-03-06 16:26 UTC (permalink / raw)
To: Álvaro Fernández Rojas
Cc: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Necip Fazil Yildiran, open list:GPIO SUBSYSTEM, devicetree,
Linux Kernel Mailing List, linux-arm Mailing List
On Sat, Mar 6, 2021 at 5:57 PM Álvaro Fernández Rojas <noltari@gmail.com> wrote:
>
> This is needed for properly registering GPIO regmap as a child of a regmap
> pin controller.
Thanks for an update!
...
> chip->parent = config->parent;
> + if (config->fwnode)
This...
> + chip->of_node = to_of_node(config->fwnode);
> + else
> + chip->of_node = dev_of_node(config->parent);
...and these lines are not needed. If there is no of_node in the chip,
the GPIO library will take care of it to be parent's one.
--
With Best Regards,
Andy Shevchenko
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH v5 02/15] gpio: regmap: set gpio_chip of_node
2021-03-06 15:56 ` Álvaro Fernández Rojas
(?)
(?)
@ 2021-03-20 1:47 ` kernel test robot
-1 siblings, 0 replies; 47+ messages in thread
From: kernel test robot @ 2021-03-20 1:47 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 6111 bytes --]
Hi "Álvaro,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on pinctrl/devel]
[also build test ERROR on robh/for-next gpio/for-next v5.12-rc3 next-20210319]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/lvaro-Fern-ndez-Rojas/pinctrl-add-BCM63XX-pincontrol-support/20210307-115258
base: https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git devel
config: xtensa-randconfig-r014-20210318 (attached as .config)
compiler: xtensa-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/46aec6ed90edf467c2e19c6e91e17d6b7567967f
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review lvaro-Fern-ndez-Rojas/pinctrl-add-BCM63XX-pincontrol-support/20210307-115258
git checkout 46aec6ed90edf467c2e19c6e91e17d6b7567967f
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=xtensa
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
drivers/gpio/gpio-regmap.c: In function 'gpio_regmap_register':
>> drivers/gpio/gpio-regmap.c:253:7: error: 'struct gpio_chip' has no member named 'of_node'
253 | chip->of_node = to_of_node(config->fwnode);
| ^~
drivers/gpio/gpio-regmap.c:255:7: error: 'struct gpio_chip' has no member named 'of_node'
255 | chip->of_node = dev_of_node(config->parent);
| ^~
vim +253 drivers/gpio/gpio-regmap.c
192
193 /**
194 * gpio_regmap_register() - Register a generic regmap GPIO controller
195 * @config: configuration for gpio_regmap
196 *
197 * Return: A pointer to the registered gpio_regmap or ERR_PTR error value.
198 */
199 struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config)
200 {
201 struct gpio_regmap *gpio;
202 struct gpio_chip *chip;
203 int ret;
204
205 if (!config->parent)
206 return ERR_PTR(-EINVAL);
207
208 if (!config->ngpio)
209 return ERR_PTR(-EINVAL);
210
211 /* we need at least one */
212 if (!config->reg_dat_base && !config->reg_set_base)
213 return ERR_PTR(-EINVAL);
214
215 /* if we have a direction register we need both input and output */
216 if ((config->reg_dir_out_base || config->reg_dir_in_base) &&
217 (!config->reg_dat_base || !config->reg_set_base))
218 return ERR_PTR(-EINVAL);
219
220 /* we don't support having both registers simultaneously for now */
221 if (config->reg_dir_out_base && config->reg_dir_in_base)
222 return ERR_PTR(-EINVAL);
223
224 gpio = kzalloc(sizeof(*gpio), GFP_KERNEL);
225 if (!gpio)
226 return ERR_PTR(-ENOMEM);
227
228 gpio->parent = config->parent;
229 gpio->regmap = config->regmap;
230 gpio->ngpio_per_reg = config->ngpio_per_reg;
231 gpio->reg_stride = config->reg_stride;
232 gpio->reg_mask_xlate = config->reg_mask_xlate;
233 gpio->reg_dat_base = config->reg_dat_base;
234 gpio->reg_set_base = config->reg_set_base;
235 gpio->reg_clr_base = config->reg_clr_base;
236 gpio->reg_dir_in_base = config->reg_dir_in_base;
237 gpio->reg_dir_out_base = config->reg_dir_out_base;
238
239 /* if not set, assume there is only one register */
240 if (!gpio->ngpio_per_reg)
241 gpio->ngpio_per_reg = config->ngpio;
242
243 /* if not set, assume they are consecutive */
244 if (!gpio->reg_stride)
245 gpio->reg_stride = 1;
246
247 if (!gpio->reg_mask_xlate)
248 gpio->reg_mask_xlate = gpio_regmap_simple_xlate;
249
250 chip = &gpio->gpio_chip;
251 chip->parent = config->parent;
252 if (config->fwnode)
> 253 chip->of_node = to_of_node(config->fwnode);
254 else
255 chip->of_node = dev_of_node(config->parent);
256 chip->base = -1;
257 chip->ngpio = config->ngpio;
258 chip->names = config->names;
259 chip->label = config->label ?: dev_name(config->parent);
260
261 /*
262 * If our regmap is fast_io we should probably set can_sleep to false.
263 * Right now, the regmap doesn't save this property, nor is there any
264 * access function for it.
265 * The only regmap type which uses fast_io is regmap-mmio. For now,
266 * assume a safe default of true here.
267 */
268 chip->can_sleep = true;
269
270 chip->get = gpio_regmap_get;
271 if (gpio->reg_set_base && gpio->reg_clr_base)
272 chip->set = gpio_regmap_set_with_clear;
273 else if (gpio->reg_set_base)
274 chip->set = gpio_regmap_set;
275
276 if (gpio->reg_dir_in_base || gpio->reg_dir_out_base) {
277 chip->get_direction = gpio_regmap_get_direction;
278 chip->direction_input = gpio_regmap_direction_input;
279 chip->direction_output = gpio_regmap_direction_output;
280 }
281
282 ret = gpiochip_add_data(chip, gpio);
283 if (ret < 0)
284 goto err_free_gpio;
285
286 if (config->irq_domain) {
287 ret = gpiochip_irqchip_add_domain(chip, config->irq_domain);
288 if (ret)
289 goto err_remove_gpiochip;
290 }
291
292 return gpio;
293
294 err_remove_gpiochip:
295 gpiochip_remove(chip);
296 err_free_gpio:
297 kfree(gpio);
298 return ERR_PTR(ret);
299 }
300 EXPORT_SYMBOL_GPL(gpio_regmap_register);
301
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 31696 bytes --]
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH v5 03/15] pinctrl: bcm: add bcm63xx base code
2021-03-06 15:56 ` Álvaro Fernández Rojas
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
-1 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add a helper for registering BCM63XX pin controllers.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: add changes suggested by Andy Shevchenko
v4: drop IRQ selects from Kconfig and add missing of_node_put()
v3: add new patch with shared code
drivers/pinctrl/bcm/Kconfig | 7 ++
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-bcm63xx.c | 112 ++++++++++++++++++++++++++
drivers/pinctrl/bcm/pinctrl-bcm63xx.h | 43 ++++++++++
4 files changed, 163 insertions(+)
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63xx.c
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63xx.h
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index 0ed14de0134c..882f19bdc243 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -29,6 +29,13 @@ config PINCTRL_BCM2835
help
Say Y here to enable the Broadcom BCM2835 GPIO driver.
+config PINCTRL_BCM63XX
+ bool
+ select GENERIC_PINCONF
+ select GPIO_REGMAP
+ select PINCONF
+ select PINMUX
+
config PINCTRL_IPROC_GPIO
bool "Broadcom iProc GPIO (with PINCONF) driver"
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index 79d5e49fdd9a..0e3cf9b15c65 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -3,6 +3,7 @@
obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
+obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o
obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm63xx.c b/drivers/pinctrl/bcm/pinctrl-bcm63xx.c
new file mode 100644
index 000000000000..0a8906e4261b
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm63xx.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for BCM63xx GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/gpio/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "pinctrl-bcm63xx.h"
+
+#define BCM63XX_BANK_SIZE 4
+
+#define BCM63XX_DIROUT_REG 0x04
+#define BCM63XX_DATA_REG 0x0c
+
+static int bcm63xx_reg_mask_xlate(struct gpio_regmap *gpio,
+ unsigned int base, unsigned int offset,
+ unsigned int *reg, unsigned int *mask)
+{
+ unsigned int line = offset % BCM63XX_BANK_GPIOS;
+ unsigned int stride = offset / BCM63XX_BANK_GPIOS;
+
+ *reg = base - stride * BCM63XX_BANK_SIZE;
+ *mask = BIT(line);
+
+ return 0;
+}
+
+static const struct of_device_id bcm63xx_gpio_of_match[] = {
+ { .compatible = "brcm,bcm6318-gpio", },
+ { .compatible = "brcm,bcm6328-gpio", },
+ { .compatible = "brcm,bcm6358-gpio", },
+ { .compatible = "brcm,bcm6362-gpio", },
+ { .compatible = "brcm,bcm6368-gpio", },
+ { .compatible = "brcm,bcm63268-gpio", },
+ { /* sentinel */ }
+};
+
+static int bcm63xx_gpio_probe(struct device *dev, struct device_node *node,
+ const struct bcm63xx_pinctrl_soc *soc,
+ struct bcm63xx_pinctrl *pc)
+{
+ struct gpio_regmap_config grc = {0};
+
+ grc.parent = dev;
+ grc.fwnode = &node->fwnode;
+ grc.ngpio = soc->ngpios;
+ grc.ngpio_per_reg = BCM63XX_BANK_GPIOS;
+ grc.regmap = pc->regs;
+ grc.reg_mask_xlate = bcm63xx_reg_mask_xlate;
+
+ if (of_property_read_u32(node, "data", &grc.reg_dat_base))
+ grc.reg_dat_base = BCM63XX_DATA_REG;
+ grc.reg_set_base = grc.reg_dat_base;
+
+ if (of_property_read_u32(node, "dirout", &grc.reg_dir_out_base))
+ grc.reg_dir_out_base = BCM63XX_DIROUT_REG;
+
+ return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &grc));
+}
+
+int bcm63xx_pinctrl_probe(struct platform_device *pdev,
+ const struct bcm63xx_pinctrl_soc *soc,
+ void *driver_data)
+{
+ struct device *dev = &pdev->dev;
+ struct bcm63xx_pinctrl *pc;
+ struct device_node *node;
+ int err;
+
+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
+ if (!pc)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, pc);
+
+ pc->dev = dev;
+ pc->driver_data = driver_data;
+
+ pc->regs = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(pc->regs))
+ return PTR_ERR(pc->regs);
+
+ pc->pctl_desc.name = dev_name(dev);
+ pc->pctl_desc.pins = soc->pins;
+ pc->pctl_desc.npins = soc->npins;
+ pc->pctl_desc.pctlops = soc->pctl_ops;
+ pc->pctl_desc.pmxops = soc->pmx_ops;
+ pc->pctl_desc.owner = THIS_MODULE;
+
+ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
+ if (IS_ERR(pc->pctl_dev))
+ return PTR_ERR(pc->pctl_dev);
+
+ for_each_child_of_node(dev->of_node, node) {
+ if (of_match_node(bcm63xx_gpio_of_match, node)) {
+ err = bcm63xx_gpio_probe(dev, node, soc, pc);
+ if (err) {
+ dev_err(dev, "could not add GPIO chip\n");
+ of_node_put(node);
+ return err;
+ }
+ }
+ }
+
+ return 0;
+}
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm63xx.h b/drivers/pinctrl/bcm/pinctrl-bcm63xx.h
new file mode 100644
index 000000000000..3bdb50021f1b
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm63xx.h
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#ifndef __PINCTRL_BCM63XX_H__
+#define __PINCTRL_BCM63XX_H__
+
+#include <linux/pinctrl/pinctrl.h>
+
+#define BCM63XX_BANK_GPIOS 32
+
+struct bcm63xx_pinctrl_soc {
+ struct pinctrl_ops *pctl_ops;
+ struct pinmux_ops *pmx_ops;
+
+ const struct pinctrl_pin_desc *pins;
+ unsigned npins;
+
+ unsigned int ngpios;
+};
+
+struct bcm63xx_pinctrl {
+ struct device *dev;
+ struct regmap *regs;
+
+ struct pinctrl_desc pctl_desc;
+ struct pinctrl_dev *pctl_dev;
+
+ void *driver_data;
+};
+
+static inline unsigned int bcm63xx_bank_pin(unsigned int pin)
+{
+ return pin % BCM63XX_BANK_GPIOS;
+}
+
+int bcm63xx_pinctrl_probe(struct platform_device *pdev,
+ const struct bcm63xx_pinctrl_soc *soc,
+ void *driver_data);
+
+#endif /* __PINCTRL_BCM63XX_H__ */
--
2.20.1
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v5 03/15] pinctrl: bcm: add bcm63xx base code
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
0 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add a helper for registering BCM63XX pin controllers.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: add changes suggested by Andy Shevchenko
v4: drop IRQ selects from Kconfig and add missing of_node_put()
v3: add new patch with shared code
drivers/pinctrl/bcm/Kconfig | 7 ++
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-bcm63xx.c | 112 ++++++++++++++++++++++++++
drivers/pinctrl/bcm/pinctrl-bcm63xx.h | 43 ++++++++++
4 files changed, 163 insertions(+)
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63xx.c
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63xx.h
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index 0ed14de0134c..882f19bdc243 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -29,6 +29,13 @@ config PINCTRL_BCM2835
help
Say Y here to enable the Broadcom BCM2835 GPIO driver.
+config PINCTRL_BCM63XX
+ bool
+ select GENERIC_PINCONF
+ select GPIO_REGMAP
+ select PINCONF
+ select PINMUX
+
config PINCTRL_IPROC_GPIO
bool "Broadcom iProc GPIO (with PINCONF) driver"
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index 79d5e49fdd9a..0e3cf9b15c65 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -3,6 +3,7 @@
obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
+obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o
obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm63xx.c b/drivers/pinctrl/bcm/pinctrl-bcm63xx.c
new file mode 100644
index 000000000000..0a8906e4261b
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm63xx.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for BCM63xx GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/gpio/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "pinctrl-bcm63xx.h"
+
+#define BCM63XX_BANK_SIZE 4
+
+#define BCM63XX_DIROUT_REG 0x04
+#define BCM63XX_DATA_REG 0x0c
+
+static int bcm63xx_reg_mask_xlate(struct gpio_regmap *gpio,
+ unsigned int base, unsigned int offset,
+ unsigned int *reg, unsigned int *mask)
+{
+ unsigned int line = offset % BCM63XX_BANK_GPIOS;
+ unsigned int stride = offset / BCM63XX_BANK_GPIOS;
+
+ *reg = base - stride * BCM63XX_BANK_SIZE;
+ *mask = BIT(line);
+
+ return 0;
+}
+
+static const struct of_device_id bcm63xx_gpio_of_match[] = {
+ { .compatible = "brcm,bcm6318-gpio", },
+ { .compatible = "brcm,bcm6328-gpio", },
+ { .compatible = "brcm,bcm6358-gpio", },
+ { .compatible = "brcm,bcm6362-gpio", },
+ { .compatible = "brcm,bcm6368-gpio", },
+ { .compatible = "brcm,bcm63268-gpio", },
+ { /* sentinel */ }
+};
+
+static int bcm63xx_gpio_probe(struct device *dev, struct device_node *node,
+ const struct bcm63xx_pinctrl_soc *soc,
+ struct bcm63xx_pinctrl *pc)
+{
+ struct gpio_regmap_config grc = {0};
+
+ grc.parent = dev;
+ grc.fwnode = &node->fwnode;
+ grc.ngpio = soc->ngpios;
+ grc.ngpio_per_reg = BCM63XX_BANK_GPIOS;
+ grc.regmap = pc->regs;
+ grc.reg_mask_xlate = bcm63xx_reg_mask_xlate;
+
+ if (of_property_read_u32(node, "data", &grc.reg_dat_base))
+ grc.reg_dat_base = BCM63XX_DATA_REG;
+ grc.reg_set_base = grc.reg_dat_base;
+
+ if (of_property_read_u32(node, "dirout", &grc.reg_dir_out_base))
+ grc.reg_dir_out_base = BCM63XX_DIROUT_REG;
+
+ return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &grc));
+}
+
+int bcm63xx_pinctrl_probe(struct platform_device *pdev,
+ const struct bcm63xx_pinctrl_soc *soc,
+ void *driver_data)
+{
+ struct device *dev = &pdev->dev;
+ struct bcm63xx_pinctrl *pc;
+ struct device_node *node;
+ int err;
+
+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
+ if (!pc)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, pc);
+
+ pc->dev = dev;
+ pc->driver_data = driver_data;
+
+ pc->regs = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(pc->regs))
+ return PTR_ERR(pc->regs);
+
+ pc->pctl_desc.name = dev_name(dev);
+ pc->pctl_desc.pins = soc->pins;
+ pc->pctl_desc.npins = soc->npins;
+ pc->pctl_desc.pctlops = soc->pctl_ops;
+ pc->pctl_desc.pmxops = soc->pmx_ops;
+ pc->pctl_desc.owner = THIS_MODULE;
+
+ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
+ if (IS_ERR(pc->pctl_dev))
+ return PTR_ERR(pc->pctl_dev);
+
+ for_each_child_of_node(dev->of_node, node) {
+ if (of_match_node(bcm63xx_gpio_of_match, node)) {
+ err = bcm63xx_gpio_probe(dev, node, soc, pc);
+ if (err) {
+ dev_err(dev, "could not add GPIO chip\n");
+ of_node_put(node);
+ return err;
+ }
+ }
+ }
+
+ return 0;
+}
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm63xx.h b/drivers/pinctrl/bcm/pinctrl-bcm63xx.h
new file mode 100644
index 000000000000..3bdb50021f1b
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm63xx.h
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#ifndef __PINCTRL_BCM63XX_H__
+#define __PINCTRL_BCM63XX_H__
+
+#include <linux/pinctrl/pinctrl.h>
+
+#define BCM63XX_BANK_GPIOS 32
+
+struct bcm63xx_pinctrl_soc {
+ struct pinctrl_ops *pctl_ops;
+ struct pinmux_ops *pmx_ops;
+
+ const struct pinctrl_pin_desc *pins;
+ unsigned npins;
+
+ unsigned int ngpios;
+};
+
+struct bcm63xx_pinctrl {
+ struct device *dev;
+ struct regmap *regs;
+
+ struct pinctrl_desc pctl_desc;
+ struct pinctrl_dev *pctl_dev;
+
+ void *driver_data;
+};
+
+static inline unsigned int bcm63xx_bank_pin(unsigned int pin)
+{
+ return pin % BCM63XX_BANK_GPIOS;
+}
+
+int bcm63xx_pinctrl_probe(struct platform_device *pdev,
+ const struct bcm63xx_pinctrl_soc *soc,
+ void *driver_data);
+
+#endif /* __PINCTRL_BCM63XX_H__ */
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 47+ messages in thread* Re: [PATCH v5 03/15] pinctrl: bcm: add bcm63xx base code
2021-03-06 15:57 ` Álvaro Fernández Rojas
@ 2021-03-07 19:05 ` Andy Shevchenko
-1 siblings, 0 replies; 47+ messages in thread
From: Andy Shevchenko @ 2021-03-07 19:05 UTC (permalink / raw)
To: Álvaro Fernández Rojas
Cc: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Necip Fazil Yildiran, open list:GPIO SUBSYSTEM, devicetree,
Linux Kernel Mailing List, linux-arm Mailing List
On Sat, Mar 6, 2021 at 5:57 PM Álvaro Fernández Rojas <noltari@gmail.com> wrote:
>
> Add a helper for registering BCM63XX pin controllers.
Thanks for this, but I think we may use the fwnode API. See below.
...
> +#include <linux/gpio/regmap.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of.h>
+ property.h
+ mod_devicetable.h
> +#include <linux/platform_device.h>
> +
> +#include "pinctrl-bcm63xx.h"
> +static int bcm63xx_reg_mask_xlate(struct gpio_regmap *gpio,
> + unsigned int base, unsigned int offset,
> + unsigned int *reg, unsigned int *mask)
> +{
> + unsigned int line = offset % BCM63XX_BANK_GPIOS;
> + unsigned int stride = offset / BCM63XX_BANK_GPIOS;
> +
> + *reg = base - stride * BCM63XX_BANK_SIZE;
> + *mask = BIT(line);
> +
> + return 0;
> +}
> +static int bcm63xx_gpio_probe(struct device *dev, struct device_node *node,
device_node *node -> fwnode_handle *fwnode
> + const struct bcm63xx_pinctrl_soc *soc,
> + struct bcm63xx_pinctrl *pc)
> +{
> + struct gpio_regmap_config grc = {0};
> +
> + grc.parent = dev;
> + grc.fwnode = &node->fwnode;
grc.fwnode = fwnode;
> + grc.ngpio = soc->ngpios;
> + grc.ngpio_per_reg = BCM63XX_BANK_GPIOS;
> + grc.regmap = pc->regs;
> + grc.reg_mask_xlate = bcm63xx_reg_mask_xlate;
> + if (of_property_read_u32(node, "data", &grc.reg_dat_base))
fwnode_property_read_u32()
> + grc.reg_dat_base = BCM63XX_DATA_REG;
> + grc.reg_set_base = grc.reg_dat_base;
> + if (of_property_read_u32(node, "dirout", &grc.reg_dir_out_base))
Ditto.
> + grc.reg_dir_out_base = BCM63XX_DIROUT_REG;
> +
> + return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &grc));
> +}
> +
> +int bcm63xx_pinctrl_probe(struct platform_device *pdev,
> + const struct bcm63xx_pinctrl_soc *soc,
> + void *driver_data)
> +{
> + struct device *dev = &pdev->dev;
> + struct bcm63xx_pinctrl *pc;
> + struct device_node *node;
struct fwnode_handle *fwnode;
> + int err;
> +
> + pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
> + if (!pc)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, pc);
> +
> + pc->dev = dev;
> + pc->driver_data = driver_data;
> + pc->regs = syscon_node_to_regmap(dev->parent->of_node);
> + if (IS_ERR(pc->regs))
> + return PTR_ERR(pc->regs);
> +
> + pc->pctl_desc.name = dev_name(dev);
> + pc->pctl_desc.pins = soc->pins;
> + pc->pctl_desc.npins = soc->npins;
> + pc->pctl_desc.pctlops = soc->pctl_ops;
> + pc->pctl_desc.pmxops = soc->pmx_ops;
> + pc->pctl_desc.owner = THIS_MODULE;
> +
> + pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
> + if (IS_ERR(pc->pctl_dev))
> + return PTR_ERR(pc->pctl_dev);
> + for_each_child_of_node(dev->of_node, node) {
device_for_each_child_node(dev, fwnode) {
> + if (of_match_node(bcm63xx_gpio_of_match, node)) {
// for now, since we have not an analogue (yet)
node ==> to_of_node(fwnode)
> + err = bcm63xx_gpio_probe(dev, node, soc, pc);
...(dev, fwnode, soc, pc);
> + if (err) {
> + dev_err(dev, "could not add GPIO chip\n");
> + of_node_put(node);
fwnode_handle_put(fwnode);
> + return err;
> + }
> + }
> + }
> +
> + return 0;
> +}
> diff --git a/drivers/pinctrl/bcm/pinctrl-bcm63xx.h b/drivers/pinctrl/bcm/pinctrl-bcm63xx.h
> new file mode 100644
> index 000000000000..3bdb50021f1b
> --- /dev/null
> +++ b/drivers/pinctrl/bcm/pinctrl-bcm63xx.h
> @@ -0,0 +1,43 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
> + * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
> + */
> +
> +#ifndef __PINCTRL_BCM63XX_H__
> +#define __PINCTRL_BCM63XX_H__
> +
> +#include <linux/pinctrl/pinctrl.h>
> +
> +#define BCM63XX_BANK_GPIOS 32
> +
> +struct bcm63xx_pinctrl_soc {
> + struct pinctrl_ops *pctl_ops;
> + struct pinmux_ops *pmx_ops;
> +
> + const struct pinctrl_pin_desc *pins;
> + unsigned npins;
> +
> + unsigned int ngpios;
> +};
> +
> +struct bcm63xx_pinctrl {
> + struct device *dev;
> + struct regmap *regs;
> +
> + struct pinctrl_desc pctl_desc;
> + struct pinctrl_dev *pctl_dev;
> +
> + void *driver_data;
> +};
> +
> +static inline unsigned int bcm63xx_bank_pin(unsigned int pin)
> +{
> + return pin % BCM63XX_BANK_GPIOS;
> +}
> +
> +int bcm63xx_pinctrl_probe(struct platform_device *pdev,
> + const struct bcm63xx_pinctrl_soc *soc,
> + void *driver_data);
> +
> +#endif /* __PINCTRL_BCM63XX_H__ */
> --
> 2.20.1
>
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [PATCH v5 03/15] pinctrl: bcm: add bcm63xx base code
@ 2021-03-07 19:05 ` Andy Shevchenko
0 siblings, 0 replies; 47+ messages in thread
From: Andy Shevchenko @ 2021-03-07 19:05 UTC (permalink / raw)
To: Álvaro Fernández Rojas
Cc: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Necip Fazil Yildiran, open list:GPIO SUBSYSTEM, devicetree,
Linux Kernel Mailing List, linux-arm Mailing List
On Sat, Mar 6, 2021 at 5:57 PM Álvaro Fernández Rojas <noltari@gmail.com> wrote:
>
> Add a helper for registering BCM63XX pin controllers.
Thanks for this, but I think we may use the fwnode API. See below.
...
> +#include <linux/gpio/regmap.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of.h>
+ property.h
+ mod_devicetable.h
> +#include <linux/platform_device.h>
> +
> +#include "pinctrl-bcm63xx.h"
> +static int bcm63xx_reg_mask_xlate(struct gpio_regmap *gpio,
> + unsigned int base, unsigned int offset,
> + unsigned int *reg, unsigned int *mask)
> +{
> + unsigned int line = offset % BCM63XX_BANK_GPIOS;
> + unsigned int stride = offset / BCM63XX_BANK_GPIOS;
> +
> + *reg = base - stride * BCM63XX_BANK_SIZE;
> + *mask = BIT(line);
> +
> + return 0;
> +}
> +static int bcm63xx_gpio_probe(struct device *dev, struct device_node *node,
device_node *node -> fwnode_handle *fwnode
> + const struct bcm63xx_pinctrl_soc *soc,
> + struct bcm63xx_pinctrl *pc)
> +{
> + struct gpio_regmap_config grc = {0};
> +
> + grc.parent = dev;
> + grc.fwnode = &node->fwnode;
grc.fwnode = fwnode;
> + grc.ngpio = soc->ngpios;
> + grc.ngpio_per_reg = BCM63XX_BANK_GPIOS;
> + grc.regmap = pc->regs;
> + grc.reg_mask_xlate = bcm63xx_reg_mask_xlate;
> + if (of_property_read_u32(node, "data", &grc.reg_dat_base))
fwnode_property_read_u32()
> + grc.reg_dat_base = BCM63XX_DATA_REG;
> + grc.reg_set_base = grc.reg_dat_base;
> + if (of_property_read_u32(node, "dirout", &grc.reg_dir_out_base))
Ditto.
> + grc.reg_dir_out_base = BCM63XX_DIROUT_REG;
> +
> + return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &grc));
> +}
> +
> +int bcm63xx_pinctrl_probe(struct platform_device *pdev,
> + const struct bcm63xx_pinctrl_soc *soc,
> + void *driver_data)
> +{
> + struct device *dev = &pdev->dev;
> + struct bcm63xx_pinctrl *pc;
> + struct device_node *node;
struct fwnode_handle *fwnode;
> + int err;
> +
> + pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
> + if (!pc)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, pc);
> +
> + pc->dev = dev;
> + pc->driver_data = driver_data;
> + pc->regs = syscon_node_to_regmap(dev->parent->of_node);
> + if (IS_ERR(pc->regs))
> + return PTR_ERR(pc->regs);
> +
> + pc->pctl_desc.name = dev_name(dev);
> + pc->pctl_desc.pins = soc->pins;
> + pc->pctl_desc.npins = soc->npins;
> + pc->pctl_desc.pctlops = soc->pctl_ops;
> + pc->pctl_desc.pmxops = soc->pmx_ops;
> + pc->pctl_desc.owner = THIS_MODULE;
> +
> + pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
> + if (IS_ERR(pc->pctl_dev))
> + return PTR_ERR(pc->pctl_dev);
> + for_each_child_of_node(dev->of_node, node) {
device_for_each_child_node(dev, fwnode) {
> + if (of_match_node(bcm63xx_gpio_of_match, node)) {
// for now, since we have not an analogue (yet)
node ==> to_of_node(fwnode)
> + err = bcm63xx_gpio_probe(dev, node, soc, pc);
...(dev, fwnode, soc, pc);
> + if (err) {
> + dev_err(dev, "could not add GPIO chip\n");
> + of_node_put(node);
fwnode_handle_put(fwnode);
> + return err;
> + }
> + }
> + }
> +
> + return 0;
> +}
> diff --git a/drivers/pinctrl/bcm/pinctrl-bcm63xx.h b/drivers/pinctrl/bcm/pinctrl-bcm63xx.h
> new file mode 100644
> index 000000000000..3bdb50021f1b
> --- /dev/null
> +++ b/drivers/pinctrl/bcm/pinctrl-bcm63xx.h
> @@ -0,0 +1,43 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
> + * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
> + */
> +
> +#ifndef __PINCTRL_BCM63XX_H__
> +#define __PINCTRL_BCM63XX_H__
> +
> +#include <linux/pinctrl/pinctrl.h>
> +
> +#define BCM63XX_BANK_GPIOS 32
> +
> +struct bcm63xx_pinctrl_soc {
> + struct pinctrl_ops *pctl_ops;
> + struct pinmux_ops *pmx_ops;
> +
> + const struct pinctrl_pin_desc *pins;
> + unsigned npins;
> +
> + unsigned int ngpios;
> +};
> +
> +struct bcm63xx_pinctrl {
> + struct device *dev;
> + struct regmap *regs;
> +
> + struct pinctrl_desc pctl_desc;
> + struct pinctrl_dev *pctl_dev;
> +
> + void *driver_data;
> +};
> +
> +static inline unsigned int bcm63xx_bank_pin(unsigned int pin)
> +{
> + return pin % BCM63XX_BANK_GPIOS;
> +}
> +
> +int bcm63xx_pinctrl_probe(struct platform_device *pdev,
> + const struct bcm63xx_pinctrl_soc *soc,
> + void *driver_data);
> +
> +#endif /* __PINCTRL_BCM63XX_H__ */
> --
> 2.20.1
>
--
With Best Regards,
Andy Shevchenko
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [PATCH v5 03/15] pinctrl: bcm: add bcm63xx base code
2021-03-07 19:05 ` Andy Shevchenko
@ 2021-03-10 7:25 ` Álvaro Fernández Rojas
-1 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-10 7:25 UTC (permalink / raw)
To: Andy Shevchenko, Linus Walleij
Cc: Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Necip Fazil Yildiran, open list:GPIO SUBSYSTEM, devicetree,
Linux Kernel Mailing List, linux-arm Mailing List
Hi Andy,
> El 7 mar 2021, a las 20:05, Andy Shevchenko <andy.shevchenko@gmail.com> escribió:
>
> On Sat, Mar 6, 2021 at 5:57 PM Álvaro Fernández Rojas <noltari@gmail.com> wrote:
>>
>> Add a helper for registering BCM63XX pin controllers.
>
> Thanks for this, but I think we may use the fwnode API. See below.
>
> ...
>
>> +#include <linux/gpio/regmap.h>
>> +#include <linux/mfd/syscon.h>
>
>> +#include <linux/of.h>
>
> + property.h
> + mod_devicetable.h
>
>> +#include <linux/platform_device.h>
>> +
>> +#include "pinctrl-bcm63xx.h"
>
>> +static int bcm63xx_reg_mask_xlate(struct gpio_regmap *gpio,
>> + unsigned int base, unsigned int offset,
>> + unsigned int *reg, unsigned int *mask)
>> +{
>> + unsigned int line = offset % BCM63XX_BANK_GPIOS;
>> + unsigned int stride = offset / BCM63XX_BANK_GPIOS;
>> +
>> + *reg = base - stride * BCM63XX_BANK_SIZE;
>> + *mask = BIT(line);
>> +
>> + return 0;
>> +}
>
>> +static int bcm63xx_gpio_probe(struct device *dev, struct device_node *node,
>
> device_node *node -> fwnode_handle *fwnode
>
>> + const struct bcm63xx_pinctrl_soc *soc,
>> + struct bcm63xx_pinctrl *pc)
>> +{
>> + struct gpio_regmap_config grc = {0};
>> +
>> + grc.parent = dev;
>
>> + grc.fwnode = &node->fwnode;
>
> grc.fwnode = fwnode;
>
>> + grc.ngpio = soc->ngpios;
>> + grc.ngpio_per_reg = BCM63XX_BANK_GPIOS;
>> + grc.regmap = pc->regs;
>> + grc.reg_mask_xlate = bcm63xx_reg_mask_xlate;
>
>> + if (of_property_read_u32(node, "data", &grc.reg_dat_base))
>
> fwnode_property_read_u32()
>
>> + grc.reg_dat_base = BCM63XX_DATA_REG;
>> + grc.reg_set_base = grc.reg_dat_base;
>
>> + if (of_property_read_u32(node, "dirout", &grc.reg_dir_out_base))
>
> Ditto.
>
>> + grc.reg_dir_out_base = BCM63XX_DIROUT_REG;
>> +
>> + return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &grc));
>> +}
>> +
>> +int bcm63xx_pinctrl_probe(struct platform_device *pdev,
>> + const struct bcm63xx_pinctrl_soc *soc,
>> + void *driver_data)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct bcm63xx_pinctrl *pc;
>
>> + struct device_node *node;
>
> struct fwnode_handle *fwnode;
>
>> + int err;
>> +
>> + pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
>> + if (!pc)
>> + return -ENOMEM;
>> +
>> + platform_set_drvdata(pdev, pc);
>> +
>> + pc->dev = dev;
>> + pc->driver_data = driver_data;
>
>> + pc->regs = syscon_node_to_regmap(dev->parent->of_node);
>> + if (IS_ERR(pc->regs))
>> + return PTR_ERR(pc->regs);
>> +
>> + pc->pctl_desc.name = dev_name(dev);
>> + pc->pctl_desc.pins = soc->pins;
>> + pc->pctl_desc.npins = soc->npins;
>> + pc->pctl_desc.pctlops = soc->pctl_ops;
>> + pc->pctl_desc.pmxops = soc->pmx_ops;
>> + pc->pctl_desc.owner = THIS_MODULE;
>> +
>> + pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
>> + if (IS_ERR(pc->pctl_dev))
>> + return PTR_ERR(pc->pctl_dev);
>
>> + for_each_child_of_node(dev->of_node, node) {
>
> device_for_each_child_node(dev, fwnode) {
>
>> + if (of_match_node(bcm63xx_gpio_of_match, node)) {
>
> // for now, since we have not an analogue (yet)
> node ==> to_of_node(fwnode)
So you want me to convert everything to fwnode, but then I would need to use of_node here…
It makes more sense to me to use of_node for now and convert it to fwnode in the future…
@Linus, what do you think?
>
>> + err = bcm63xx_gpio_probe(dev, node, soc, pc);
>
> ...(dev, fwnode, soc, pc);
>
>> + if (err) {
>> + dev_err(dev, "could not add GPIO chip\n");
>
>> + of_node_put(node);
>
> fwnode_handle_put(fwnode);
>
>> + return err;
>> + }
>> + }
>> + }
>> +
>> + return 0;
>> +}
>> diff --git a/drivers/pinctrl/bcm/pinctrl-bcm63xx.h b/drivers/pinctrl/bcm/pinctrl-bcm63xx.h
>> new file mode 100644
>> index 000000000000..3bdb50021f1b
>> --- /dev/null
>> +++ b/drivers/pinctrl/bcm/pinctrl-bcm63xx.h
>> @@ -0,0 +1,43 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
>> + * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
>> + */
>> +
>> +#ifndef __PINCTRL_BCM63XX_H__
>> +#define __PINCTRL_BCM63XX_H__
>> +
>> +#include <linux/pinctrl/pinctrl.h>
>> +
>> +#define BCM63XX_BANK_GPIOS 32
>> +
>> +struct bcm63xx_pinctrl_soc {
>> + struct pinctrl_ops *pctl_ops;
>> + struct pinmux_ops *pmx_ops;
>> +
>> + const struct pinctrl_pin_desc *pins;
>> + unsigned npins;
>> +
>> + unsigned int ngpios;
>> +};
>> +
>> +struct bcm63xx_pinctrl {
>> + struct device *dev;
>> + struct regmap *regs;
>> +
>> + struct pinctrl_desc pctl_desc;
>> + struct pinctrl_dev *pctl_dev;
>> +
>> + void *driver_data;
>> +};
>> +
>> +static inline unsigned int bcm63xx_bank_pin(unsigned int pin)
>> +{
>> + return pin % BCM63XX_BANK_GPIOS;
>> +}
>> +
>> +int bcm63xx_pinctrl_probe(struct platform_device *pdev,
>> + const struct bcm63xx_pinctrl_soc *soc,
>> + void *driver_data);
>> +
>> +#endif /* __PINCTRL_BCM63XX_H__ */
>> --
>> 2.20.1
>>
>
>
> --
> With Best Regards,
> Andy Shevchenko
Best regards,
Álvaro.
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [PATCH v5 03/15] pinctrl: bcm: add bcm63xx base code
@ 2021-03-10 7:25 ` Álvaro Fernández Rojas
0 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-10 7:25 UTC (permalink / raw)
To: Andy Shevchenko, Linus Walleij
Cc: Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Necip Fazil Yildiran, open list:GPIO SUBSYSTEM, devicetree,
Linux Kernel Mailing List, linux-arm Mailing List
Hi Andy,
> El 7 mar 2021, a las 20:05, Andy Shevchenko <andy.shevchenko@gmail.com> escribió:
>
> On Sat, Mar 6, 2021 at 5:57 PM Álvaro Fernández Rojas <noltari@gmail.com> wrote:
>>
>> Add a helper for registering BCM63XX pin controllers.
>
> Thanks for this, but I think we may use the fwnode API. See below.
>
> ...
>
>> +#include <linux/gpio/regmap.h>
>> +#include <linux/mfd/syscon.h>
>
>> +#include <linux/of.h>
>
> + property.h
> + mod_devicetable.h
>
>> +#include <linux/platform_device.h>
>> +
>> +#include "pinctrl-bcm63xx.h"
>
>> +static int bcm63xx_reg_mask_xlate(struct gpio_regmap *gpio,
>> + unsigned int base, unsigned int offset,
>> + unsigned int *reg, unsigned int *mask)
>> +{
>> + unsigned int line = offset % BCM63XX_BANK_GPIOS;
>> + unsigned int stride = offset / BCM63XX_BANK_GPIOS;
>> +
>> + *reg = base - stride * BCM63XX_BANK_SIZE;
>> + *mask = BIT(line);
>> +
>> + return 0;
>> +}
>
>> +static int bcm63xx_gpio_probe(struct device *dev, struct device_node *node,
>
> device_node *node -> fwnode_handle *fwnode
>
>> + const struct bcm63xx_pinctrl_soc *soc,
>> + struct bcm63xx_pinctrl *pc)
>> +{
>> + struct gpio_regmap_config grc = {0};
>> +
>> + grc.parent = dev;
>
>> + grc.fwnode = &node->fwnode;
>
> grc.fwnode = fwnode;
>
>> + grc.ngpio = soc->ngpios;
>> + grc.ngpio_per_reg = BCM63XX_BANK_GPIOS;
>> + grc.regmap = pc->regs;
>> + grc.reg_mask_xlate = bcm63xx_reg_mask_xlate;
>
>> + if (of_property_read_u32(node, "data", &grc.reg_dat_base))
>
> fwnode_property_read_u32()
>
>> + grc.reg_dat_base = BCM63XX_DATA_REG;
>> + grc.reg_set_base = grc.reg_dat_base;
>
>> + if (of_property_read_u32(node, "dirout", &grc.reg_dir_out_base))
>
> Ditto.
>
>> + grc.reg_dir_out_base = BCM63XX_DIROUT_REG;
>> +
>> + return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &grc));
>> +}
>> +
>> +int bcm63xx_pinctrl_probe(struct platform_device *pdev,
>> + const struct bcm63xx_pinctrl_soc *soc,
>> + void *driver_data)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct bcm63xx_pinctrl *pc;
>
>> + struct device_node *node;
>
> struct fwnode_handle *fwnode;
>
>> + int err;
>> +
>> + pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
>> + if (!pc)
>> + return -ENOMEM;
>> +
>> + platform_set_drvdata(pdev, pc);
>> +
>> + pc->dev = dev;
>> + pc->driver_data = driver_data;
>
>> + pc->regs = syscon_node_to_regmap(dev->parent->of_node);
>> + if (IS_ERR(pc->regs))
>> + return PTR_ERR(pc->regs);
>> +
>> + pc->pctl_desc.name = dev_name(dev);
>> + pc->pctl_desc.pins = soc->pins;
>> + pc->pctl_desc.npins = soc->npins;
>> + pc->pctl_desc.pctlops = soc->pctl_ops;
>> + pc->pctl_desc.pmxops = soc->pmx_ops;
>> + pc->pctl_desc.owner = THIS_MODULE;
>> +
>> + pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
>> + if (IS_ERR(pc->pctl_dev))
>> + return PTR_ERR(pc->pctl_dev);
>
>> + for_each_child_of_node(dev->of_node, node) {
>
> device_for_each_child_node(dev, fwnode) {
>
>> + if (of_match_node(bcm63xx_gpio_of_match, node)) {
>
> // for now, since we have not an analogue (yet)
> node ==> to_of_node(fwnode)
So you want me to convert everything to fwnode, but then I would need to use of_node here…
It makes more sense to me to use of_node for now and convert it to fwnode in the future…
@Linus, what do you think?
>
>> + err = bcm63xx_gpio_probe(dev, node, soc, pc);
>
> ...(dev, fwnode, soc, pc);
>
>> + if (err) {
>> + dev_err(dev, "could not add GPIO chip\n");
>
>> + of_node_put(node);
>
> fwnode_handle_put(fwnode);
>
>> + return err;
>> + }
>> + }
>> + }
>> +
>> + return 0;
>> +}
>> diff --git a/drivers/pinctrl/bcm/pinctrl-bcm63xx.h b/drivers/pinctrl/bcm/pinctrl-bcm63xx.h
>> new file mode 100644
>> index 000000000000..3bdb50021f1b
>> --- /dev/null
>> +++ b/drivers/pinctrl/bcm/pinctrl-bcm63xx.h
>> @@ -0,0 +1,43 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
>> + * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
>> + */
>> +
>> +#ifndef __PINCTRL_BCM63XX_H__
>> +#define __PINCTRL_BCM63XX_H__
>> +
>> +#include <linux/pinctrl/pinctrl.h>
>> +
>> +#define BCM63XX_BANK_GPIOS 32
>> +
>> +struct bcm63xx_pinctrl_soc {
>> + struct pinctrl_ops *pctl_ops;
>> + struct pinmux_ops *pmx_ops;
>> +
>> + const struct pinctrl_pin_desc *pins;
>> + unsigned npins;
>> +
>> + unsigned int ngpios;
>> +};
>> +
>> +struct bcm63xx_pinctrl {
>> + struct device *dev;
>> + struct regmap *regs;
>> +
>> + struct pinctrl_desc pctl_desc;
>> + struct pinctrl_dev *pctl_dev;
>> +
>> + void *driver_data;
>> +};
>> +
>> +static inline unsigned int bcm63xx_bank_pin(unsigned int pin)
>> +{
>> + return pin % BCM63XX_BANK_GPIOS;
>> +}
>> +
>> +int bcm63xx_pinctrl_probe(struct platform_device *pdev,
>> + const struct bcm63xx_pinctrl_soc *soc,
>> + void *driver_data);
>> +
>> +#endif /* __PINCTRL_BCM63XX_H__ */
>> --
>> 2.20.1
>>
>
>
> --
> With Best Regards,
> Andy Shevchenko
Best regards,
Álvaro.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [PATCH v5 03/15] pinctrl: bcm: add bcm63xx base code
2021-03-10 7:25 ` Álvaro Fernández Rojas
@ 2021-03-10 23:59 ` Linus Walleij
-1 siblings, 0 replies; 47+ messages in thread
From: Linus Walleij @ 2021-03-10 23:59 UTC (permalink / raw)
To: Álvaro Fernández Rojas
Cc: Andy Shevchenko, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Necip Fazil Yildiran, open list:GPIO SUBSYSTEM, devicetree,
Linux Kernel Mailing List, linux-arm Mailing List
On Wed, Mar 10, 2021 at 8:25 AM Álvaro Fernández Rojas
<noltari@gmail.com> wrote:
> > // for now, since we have not an analogue (yet)
> > node ==> to_of_node(fwnode)
>
> So you want me to convert everything to fwnode, but then I would need to use of_node here…
> It makes more sense to me to use of_node for now and convert it to fwnode in the future…
> @Linus, what do you think?
I am aware of the ambition to use fwnode more to more things.
To me it is most important on things that will potentially run with
both OF and ACPI.
Typical example: ARM Qualcomm SoCs. New drivers for Aarch64 platforms.
This is a legacy MIPS platform, and we have tons of legacy platforms for ARM
etc which will never get converted to fwnode, sadly.
Is it realistic that these MIPS platforms will run ACPI in addition to
OF? Is ACPI even available on MIPS? Isn't OF the preferred HW description
language for anything MIPS?
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH v5 03/15] pinctrl: bcm: add bcm63xx base code
@ 2021-03-10 23:59 ` Linus Walleij
0 siblings, 0 replies; 47+ messages in thread
From: Linus Walleij @ 2021-03-10 23:59 UTC (permalink / raw)
To: Álvaro Fernández Rojas
Cc: Andy Shevchenko, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Necip Fazil Yildiran, open list:GPIO SUBSYSTEM, devicetree,
Linux Kernel Mailing List, linux-arm Mailing List
On Wed, Mar 10, 2021 at 8:25 AM Álvaro Fernández Rojas
<noltari@gmail.com> wrote:
> > // for now, since we have not an analogue (yet)
> > node ==> to_of_node(fwnode)
>
> So you want me to convert everything to fwnode, but then I would need to use of_node here…
> It makes more sense to me to use of_node for now and convert it to fwnode in the future…
> @Linus, what do you think?
I am aware of the ambition to use fwnode more to more things.
To me it is most important on things that will potentially run with
both OF and ACPI.
Typical example: ARM Qualcomm SoCs. New drivers for Aarch64 platforms.
This is a legacy MIPS platform, and we have tons of legacy platforms for ARM
etc which will never get converted to fwnode, sadly.
Is it realistic that these MIPS platforms will run ACPI in addition to
OF? Is ACPI even available on MIPS? Isn't OF the preferred HW description
language for anything MIPS?
Yours,
Linus Walleij
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH v5 04/15] dt-bindings: add BCM6328 pincontroller binding documentation
2021-03-06 15:56 ` Álvaro Fernández Rojas
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
-1 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add binding documentation for the pincontrol core found in BCM6328 SoCs.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: change Documentation to dt-bindings in commit title
v4: no changes
v3: add new gpio node
v2: remove interrupts
.../pinctrl/brcm,bcm6328-pinctrl.yaml | 171 ++++++++++++++++++
1 file changed, 171 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
new file mode 100644
index 000000000000..d4e3c7897f19
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6328-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6328 pin controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |+
+ The pin controller node should be the child of a syscon node.
+
+ Refer to the the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+ compatible:
+ const: brcm,bcm6328-pinctrl
+
+patternProperties:
+ '^gpio$':
+ type: object
+ properties:
+ compatible:
+ const: brcm,bcm6328-gpio
+
+ data:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the data register (in bytes).
+
+ dirout:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the dirout register (in bytes).
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ required:
+ - gpio-controller
+ - gpio-ranges
+ - '#gpio-cells'
+
+ '^.*$':
+ if:
+ type: object
+ then:
+ properties:
+ function:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ serial_led_data, serial_led_clk, inet_act_led, pcie_clkreq,
+ led, ephy0_act_led, ephy1_act_led, ephy2_act_led,
+ ephy3_act_led, hsspi_cs1, usb_device_port, usb_host_port ]
+
+ pins:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ gpio6, gpio7, gpio11, gpio16, gpio17, gpio18, gpio19,
+ gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1,
+ usb_port1 ]
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio_cntl@10000080 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x10000080 0x80>;
+
+ pinctrl: pinctrl {
+ compatible = "brcm,bcm6328-pinctrl";
+
+ gpio {
+ compatible = "brcm,bcm6328-gpio";
+ data = <0xc>;
+ dirout = <0x4>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+ };
+
+ pinctrl_serial_led: serial_led {
+ pinctrl_serial_led_data: serial_led_data {
+ function = "serial_led_data";
+ pins = "gpio6";
+ };
+
+ pinctrl_serial_led_clk: serial_led_clk {
+ function = "serial_led_clk";
+ pins = "gpio7";
+ };
+ };
+
+ pinctrl_inet_act_led: inet_act_led {
+ function = "inet_act_led";
+ pins = "gpio11";
+ };
+
+ pinctrl_pcie_clkreq: pcie_clkreq {
+ function = "pcie_clkreq";
+ pins = "gpio16";
+ };
+
+ pinctrl_ephy0_spd_led: ephy0_spd_led {
+ function = "led";
+ pins = "gpio17";
+ };
+
+ pinctrl_ephy1_spd_led: ephy1_spd_led {
+ function = "led";
+ pins = "gpio18";
+ };
+
+ pinctrl_ephy2_spd_led: ephy2_spd_led {
+ function = "led";
+ pins = "gpio19";
+ };
+
+ pinctrl_ephy3_spd_led: ephy3_spd_led {
+ function = "led";
+ pins = "gpio20";
+ };
+
+ pinctrl_ephy0_act_led: ephy0_act_led {
+ function = "ephy0_act_led";
+ pins = "gpio25";
+ };
+
+ pinctrl_ephy1_act_led: ephy1_act_led {
+ function = "ephy1_act_led";
+ pins = "gpio26";
+ };
+
+ pinctrl_ephy2_act_led: ephy2_act_led {
+ function = "ephy2_act_led";
+ pins = "gpio27";
+ };
+
+ pinctrl_ephy3_act_led: ephy3_act_led {
+ function = "ephy3_act_led";
+ pins = "gpio28";
+ };
+
+ pinctrl_hsspi_cs1: hsspi_cs1 {
+ function = "hsspi_cs1";
+ pins = "hsspi_cs1";
+ };
+
+ pinctrl_usb_port1_device: usb_port1_device {
+ function = "usb_device_port";
+ pins = "usb_port1";
+ };
+
+ pinctrl_usb_port1_host: usb_port1_host {
+ function = "usb_host_port";
+ pins = "usb_port1";
+ };
+ };
+ };
--
2.20.1
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v5 04/15] dt-bindings: add BCM6328 pincontroller binding documentation
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
0 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add binding documentation for the pincontrol core found in BCM6328 SoCs.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: change Documentation to dt-bindings in commit title
v4: no changes
v3: add new gpio node
v2: remove interrupts
.../pinctrl/brcm,bcm6328-pinctrl.yaml | 171 ++++++++++++++++++
1 file changed, 171 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
new file mode 100644
index 000000000000..d4e3c7897f19
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6328-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6328 pin controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |+
+ The pin controller node should be the child of a syscon node.
+
+ Refer to the the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+ compatible:
+ const: brcm,bcm6328-pinctrl
+
+patternProperties:
+ '^gpio$':
+ type: object
+ properties:
+ compatible:
+ const: brcm,bcm6328-gpio
+
+ data:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the data register (in bytes).
+
+ dirout:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the dirout register (in bytes).
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ required:
+ - gpio-controller
+ - gpio-ranges
+ - '#gpio-cells'
+
+ '^.*$':
+ if:
+ type: object
+ then:
+ properties:
+ function:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ serial_led_data, serial_led_clk, inet_act_led, pcie_clkreq,
+ led, ephy0_act_led, ephy1_act_led, ephy2_act_led,
+ ephy3_act_led, hsspi_cs1, usb_device_port, usb_host_port ]
+
+ pins:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ gpio6, gpio7, gpio11, gpio16, gpio17, gpio18, gpio19,
+ gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1,
+ usb_port1 ]
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio_cntl@10000080 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x10000080 0x80>;
+
+ pinctrl: pinctrl {
+ compatible = "brcm,bcm6328-pinctrl";
+
+ gpio {
+ compatible = "brcm,bcm6328-gpio";
+ data = <0xc>;
+ dirout = <0x4>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+ };
+
+ pinctrl_serial_led: serial_led {
+ pinctrl_serial_led_data: serial_led_data {
+ function = "serial_led_data";
+ pins = "gpio6";
+ };
+
+ pinctrl_serial_led_clk: serial_led_clk {
+ function = "serial_led_clk";
+ pins = "gpio7";
+ };
+ };
+
+ pinctrl_inet_act_led: inet_act_led {
+ function = "inet_act_led";
+ pins = "gpio11";
+ };
+
+ pinctrl_pcie_clkreq: pcie_clkreq {
+ function = "pcie_clkreq";
+ pins = "gpio16";
+ };
+
+ pinctrl_ephy0_spd_led: ephy0_spd_led {
+ function = "led";
+ pins = "gpio17";
+ };
+
+ pinctrl_ephy1_spd_led: ephy1_spd_led {
+ function = "led";
+ pins = "gpio18";
+ };
+
+ pinctrl_ephy2_spd_led: ephy2_spd_led {
+ function = "led";
+ pins = "gpio19";
+ };
+
+ pinctrl_ephy3_spd_led: ephy3_spd_led {
+ function = "led";
+ pins = "gpio20";
+ };
+
+ pinctrl_ephy0_act_led: ephy0_act_led {
+ function = "ephy0_act_led";
+ pins = "gpio25";
+ };
+
+ pinctrl_ephy1_act_led: ephy1_act_led {
+ function = "ephy1_act_led";
+ pins = "gpio26";
+ };
+
+ pinctrl_ephy2_act_led: ephy2_act_led {
+ function = "ephy2_act_led";
+ pins = "gpio27";
+ };
+
+ pinctrl_ephy3_act_led: ephy3_act_led {
+ function = "ephy3_act_led";
+ pins = "gpio28";
+ };
+
+ pinctrl_hsspi_cs1: hsspi_cs1 {
+ function = "hsspi_cs1";
+ pins = "hsspi_cs1";
+ };
+
+ pinctrl_usb_port1_device: usb_port1_device {
+ function = "usb_device_port";
+ pins = "usb_port1";
+ };
+
+ pinctrl_usb_port1_host: usb_port1_host {
+ function = "usb_host_port";
+ pins = "usb_port1";
+ };
+ };
+ };
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 47+ messages in thread* Re: [PATCH v5 04/15] dt-bindings: add BCM6328 pincontroller binding documentation
2021-03-06 15:57 ` Álvaro Fernández Rojas
@ 2021-03-08 22:44 ` Rob Herring
-1 siblings, 0 replies; 47+ messages in thread
From: Rob Herring @ 2021-03-08 22:44 UTC (permalink / raw)
To: Álvaro Fernández Rojas
Cc: Linus Walleij, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Necip Fazil Yildiran, Andy Shevchenko, linux-gpio, devicetree,
linux-kernel, linux-arm-kernel
On Sat, Mar 06, 2021 at 04:57:01PM +0100, Álvaro Fernández Rojas wrote:
> Add binding documentation for the pincontrol core found in BCM6328 SoCs.
>
> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
> Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
> ---
> v5: change Documentation to dt-bindings in commit title
> v4: no changes
> v3: add new gpio node
> v2: remove interrupts
>
> .../pinctrl/brcm,bcm6328-pinctrl.yaml | 171 ++++++++++++++++++
> 1 file changed, 171 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
> new file mode 100644
> index 000000000000..d4e3c7897f19
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
> @@ -0,0 +1,171 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6328-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom BCM6328 pin controller
> +
> +maintainers:
> + - Álvaro Fernández Rojas <noltari@gmail.com>
> + - Jonas Gorski <jonas.gorski@gmail.com>
> +
> +description: |+
> + The pin controller node should be the child of a syscon node.
> +
> + Refer to the the bindings described in
> + Documentation/devicetree/bindings/mfd/syscon.yaml
> +
> +properties:
> + compatible:
> + const: brcm,bcm6328-pinctrl
> +
> +patternProperties:
> + '^gpio$':
Not a pattern, move to 'properties'
> + type: object
> + properties:
> + compatible:
> + const: brcm,bcm6328-gpio
> +
> + data:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Offset in the register map for the data register (in bytes).
> +
> + dirout:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Offset in the register map for the dirout register (in bytes).
> +
> + gpio-controller: true
> +
> + "#gpio-cells":
> + const: 2
> +
> + gpio-ranges:
> + maxItems: 1
> +
> + required:
> + - gpio-controller
> + - gpio-ranges
> + - '#gpio-cells'
> +
> + '^.*$':
> + if:
> + type: object
> + then:
Instead of this hack (which shouldn't work because 'gpio' is also a
node), use some defined node name pattern (e.g. '-pins$')
You need an 'additionalProperties: false' at this level.
> + properties:
> + function:
> + $ref: "/schemas/types.yaml#/definitions/string"
Reference the pinctrl schemas which define these properties.
> + enum: [ serial_led_data, serial_led_clk, inet_act_led, pcie_clkreq,
> + led, ephy0_act_led, ephy1_act_led, ephy2_act_led,
> + ephy3_act_led, hsspi_cs1, usb_device_port, usb_host_port ]
> +
> + pins:
> + $ref: "/schemas/types.yaml#/definitions/string"
> + enum: [ gpio6, gpio7, gpio11, gpio16, gpio17, gpio18, gpio19,
> + gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1,
> + usb_port1 ]
> +
> +required:
> + - compatible
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + gpio_cntl@10000080 {
> + compatible = "syscon", "simple-mfd";
syscon needs a specific compatible for the SoC block.
What else is in this block besides pinctrl?
> + reg = <0x10000080 0x80>;
> +
> + pinctrl: pinctrl {
> + compatible = "brcm,bcm6328-pinctrl";
Is there a register range of just pinctrl registers? If so, add 'reg'
and define the sub-range.
> +
> + gpio {
> + compatible = "brcm,bcm6328-gpio";
> + data = <0xc>;
> + dirout = <0x4>;
> +
> + gpio-controller;
> + gpio-ranges = <&pinctrl 0 0 32>;
> + #gpio-cells = <2>;
> + };
> +
> + pinctrl_serial_led: serial_led {
> + pinctrl_serial_led_data: serial_led_data {
> + function = "serial_led_data";
> + pins = "gpio6";
> + };
> +
> + pinctrl_serial_led_clk: serial_led_clk {
> + function = "serial_led_clk";
> + pins = "gpio7";
> + };
> + };
> +
> + pinctrl_inet_act_led: inet_act_led {
> + function = "inet_act_led";
> + pins = "gpio11";
> + };
> +
> + pinctrl_pcie_clkreq: pcie_clkreq {
> + function = "pcie_clkreq";
> + pins = "gpio16";
> + };
> +
> + pinctrl_ephy0_spd_led: ephy0_spd_led {
> + function = "led";
> + pins = "gpio17";
> + };
> +
> + pinctrl_ephy1_spd_led: ephy1_spd_led {
> + function = "led";
> + pins = "gpio18";
> + };
> +
> + pinctrl_ephy2_spd_led: ephy2_spd_led {
> + function = "led";
> + pins = "gpio19";
> + };
> +
> + pinctrl_ephy3_spd_led: ephy3_spd_led {
> + function = "led";
> + pins = "gpio20";
> + };
> +
> + pinctrl_ephy0_act_led: ephy0_act_led {
> + function = "ephy0_act_led";
> + pins = "gpio25";
> + };
> +
> + pinctrl_ephy1_act_led: ephy1_act_led {
> + function = "ephy1_act_led";
> + pins = "gpio26";
> + };
> +
> + pinctrl_ephy2_act_led: ephy2_act_led {
> + function = "ephy2_act_led";
> + pins = "gpio27";
> + };
> +
> + pinctrl_ephy3_act_led: ephy3_act_led {
> + function = "ephy3_act_led";
> + pins = "gpio28";
> + };
> +
> + pinctrl_hsspi_cs1: hsspi_cs1 {
> + function = "hsspi_cs1";
> + pins = "hsspi_cs1";
> + };
> +
> + pinctrl_usb_port1_device: usb_port1_device {
> + function = "usb_device_port";
> + pins = "usb_port1";
> + };
> +
> + pinctrl_usb_port1_host: usb_port1_host {
> + function = "usb_host_port";
> + pins = "usb_port1";
> + };
> + };
> + };
> --
> 2.20.1
>
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [PATCH v5 04/15] dt-bindings: add BCM6328 pincontroller binding documentation
@ 2021-03-08 22:44 ` Rob Herring
0 siblings, 0 replies; 47+ messages in thread
From: Rob Herring @ 2021-03-08 22:44 UTC (permalink / raw)
To: Álvaro Fernández Rojas
Cc: Linus Walleij, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Necip Fazil Yildiran, Andy Shevchenko, linux-gpio, devicetree,
linux-kernel, linux-arm-kernel
On Sat, Mar 06, 2021 at 04:57:01PM +0100, Álvaro Fernández Rojas wrote:
> Add binding documentation for the pincontrol core found in BCM6328 SoCs.
>
> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
> Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
> ---
> v5: change Documentation to dt-bindings in commit title
> v4: no changes
> v3: add new gpio node
> v2: remove interrupts
>
> .../pinctrl/brcm,bcm6328-pinctrl.yaml | 171 ++++++++++++++++++
> 1 file changed, 171 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
> new file mode 100644
> index 000000000000..d4e3c7897f19
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
> @@ -0,0 +1,171 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6328-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom BCM6328 pin controller
> +
> +maintainers:
> + - Álvaro Fernández Rojas <noltari@gmail.com>
> + - Jonas Gorski <jonas.gorski@gmail.com>
> +
> +description: |+
> + The pin controller node should be the child of a syscon node.
> +
> + Refer to the the bindings described in
> + Documentation/devicetree/bindings/mfd/syscon.yaml
> +
> +properties:
> + compatible:
> + const: brcm,bcm6328-pinctrl
> +
> +patternProperties:
> + '^gpio$':
Not a pattern, move to 'properties'
> + type: object
> + properties:
> + compatible:
> + const: brcm,bcm6328-gpio
> +
> + data:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Offset in the register map for the data register (in bytes).
> +
> + dirout:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Offset in the register map for the dirout register (in bytes).
> +
> + gpio-controller: true
> +
> + "#gpio-cells":
> + const: 2
> +
> + gpio-ranges:
> + maxItems: 1
> +
> + required:
> + - gpio-controller
> + - gpio-ranges
> + - '#gpio-cells'
> +
> + '^.*$':
> + if:
> + type: object
> + then:
Instead of this hack (which shouldn't work because 'gpio' is also a
node), use some defined node name pattern (e.g. '-pins$')
You need an 'additionalProperties: false' at this level.
> + properties:
> + function:
> + $ref: "/schemas/types.yaml#/definitions/string"
Reference the pinctrl schemas which define these properties.
> + enum: [ serial_led_data, serial_led_clk, inet_act_led, pcie_clkreq,
> + led, ephy0_act_led, ephy1_act_led, ephy2_act_led,
> + ephy3_act_led, hsspi_cs1, usb_device_port, usb_host_port ]
> +
> + pins:
> + $ref: "/schemas/types.yaml#/definitions/string"
> + enum: [ gpio6, gpio7, gpio11, gpio16, gpio17, gpio18, gpio19,
> + gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1,
> + usb_port1 ]
> +
> +required:
> + - compatible
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + gpio_cntl@10000080 {
> + compatible = "syscon", "simple-mfd";
syscon needs a specific compatible for the SoC block.
What else is in this block besides pinctrl?
> + reg = <0x10000080 0x80>;
> +
> + pinctrl: pinctrl {
> + compatible = "brcm,bcm6328-pinctrl";
Is there a register range of just pinctrl registers? If so, add 'reg'
and define the sub-range.
> +
> + gpio {
> + compatible = "brcm,bcm6328-gpio";
> + data = <0xc>;
> + dirout = <0x4>;
> +
> + gpio-controller;
> + gpio-ranges = <&pinctrl 0 0 32>;
> + #gpio-cells = <2>;
> + };
> +
> + pinctrl_serial_led: serial_led {
> + pinctrl_serial_led_data: serial_led_data {
> + function = "serial_led_data";
> + pins = "gpio6";
> + };
> +
> + pinctrl_serial_led_clk: serial_led_clk {
> + function = "serial_led_clk";
> + pins = "gpio7";
> + };
> + };
> +
> + pinctrl_inet_act_led: inet_act_led {
> + function = "inet_act_led";
> + pins = "gpio11";
> + };
> +
> + pinctrl_pcie_clkreq: pcie_clkreq {
> + function = "pcie_clkreq";
> + pins = "gpio16";
> + };
> +
> + pinctrl_ephy0_spd_led: ephy0_spd_led {
> + function = "led";
> + pins = "gpio17";
> + };
> +
> + pinctrl_ephy1_spd_led: ephy1_spd_led {
> + function = "led";
> + pins = "gpio18";
> + };
> +
> + pinctrl_ephy2_spd_led: ephy2_spd_led {
> + function = "led";
> + pins = "gpio19";
> + };
> +
> + pinctrl_ephy3_spd_led: ephy3_spd_led {
> + function = "led";
> + pins = "gpio20";
> + };
> +
> + pinctrl_ephy0_act_led: ephy0_act_led {
> + function = "ephy0_act_led";
> + pins = "gpio25";
> + };
> +
> + pinctrl_ephy1_act_led: ephy1_act_led {
> + function = "ephy1_act_led";
> + pins = "gpio26";
> + };
> +
> + pinctrl_ephy2_act_led: ephy2_act_led {
> + function = "ephy2_act_led";
> + pins = "gpio27";
> + };
> +
> + pinctrl_ephy3_act_led: ephy3_act_led {
> + function = "ephy3_act_led";
> + pins = "gpio28";
> + };
> +
> + pinctrl_hsspi_cs1: hsspi_cs1 {
> + function = "hsspi_cs1";
> + pins = "hsspi_cs1";
> + };
> +
> + pinctrl_usb_port1_device: usb_port1_device {
> + function = "usb_device_port";
> + pins = "usb_port1";
> + };
> +
> + pinctrl_usb_port1_host: usb_port1_host {
> + function = "usb_host_port";
> + pins = "usb_port1";
> + };
> + };
> + };
> --
> 2.20.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH v5 05/15] pinctrl: add a pincontrol driver for BCM6328
2021-03-06 15:56 ` Álvaro Fernández Rojas
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
-1 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add a pincontrol driver for BCM6328. BCM6328 supports muxing 32 pins as
GPIOs, as LEDs for the integrated LED controller, or various other
functions. Its pincontrol mux registers also control other aspects, like
switching the second USB port between host and device mode.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: add changes suggested by Andy Shevchenko
v4: no changes
v3: use new shared code
v2: switch to GPIO_REGMAP
drivers/pinctrl/bcm/Kconfig | 8 +
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-bcm6328.c | 404 ++++++++++++++++++++++++++
3 files changed, 413 insertions(+)
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6328.c
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index 882f19bdc243..d35e5d3fe26f 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -36,6 +36,14 @@ config PINCTRL_BCM63XX
select PINCONF
select PINMUX
+config PINCTRL_BCM6328
+ bool "Broadcom BCM6328 GPIO driver"
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
+ select PINCTRL_BCM63XX
+ default BMIPS_GENERIC
+ help
+ Say Y here to enable the Broadcom BCM6328 GPIO driver.
+
config PINCTRL_IPROC_GPIO
bool "Broadcom iProc GPIO (with PINCONF) driver"
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index 0e3cf9b15c65..57e5434a6db6 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
+obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o
obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm6328.c b/drivers/pinctrl/bcm/pinctrl-bcm6328.c
new file mode 100644
index 000000000000..c9efce600550
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6328.c
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for BCM6328 GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "../pinctrl-utils.h"
+
+#include "pinctrl-bcm63xx.h"
+
+#define BCM6328_NUM_GPIOS 32
+
+#define BCM6328_MODE_REG 0x18
+#define BCM6328_MUX_HI_REG 0x1c
+#define BCM6328_MUX_LO_REG 0x20
+#define BCM6328_MUX_OTHER_REG 0x24
+#define BCM6328_MUX_MASK GENMASK(1, 0)
+
+struct bcm6328_pingroup {
+ const char *name;
+ const unsigned * const pins;
+ const unsigned num_pins;
+};
+
+struct bcm6328_function {
+ const char *name;
+ const char * const *groups;
+ const unsigned num_groups;
+
+ unsigned mode_val:1;
+ unsigned mux_val:2;
+};
+
+static const unsigned int bcm6328_mux[] = {
+ BCM6328_MUX_LO_REG,
+ BCM6328_MUX_HI_REG,
+ BCM6328_MUX_OTHER_REG
+};
+
+static const struct pinctrl_pin_desc bcm6328_pins[] = {
+ PINCTRL_PIN(0, "gpio0"),
+ PINCTRL_PIN(1, "gpio1"),
+ PINCTRL_PIN(2, "gpio2"),
+ PINCTRL_PIN(3, "gpio3"),
+ PINCTRL_PIN(4, "gpio4"),
+ PINCTRL_PIN(5, "gpio5"),
+ PINCTRL_PIN(6, "gpio6"),
+ PINCTRL_PIN(7, "gpio7"),
+ PINCTRL_PIN(8, "gpio8"),
+ PINCTRL_PIN(9, "gpio9"),
+ PINCTRL_PIN(10, "gpio10"),
+ PINCTRL_PIN(11, "gpio11"),
+ PINCTRL_PIN(12, "gpio12"),
+ PINCTRL_PIN(13, "gpio13"),
+ PINCTRL_PIN(14, "gpio14"),
+ PINCTRL_PIN(15, "gpio15"),
+ PINCTRL_PIN(16, "gpio16"),
+ PINCTRL_PIN(17, "gpio17"),
+ PINCTRL_PIN(18, "gpio18"),
+ PINCTRL_PIN(19, "gpio19"),
+ PINCTRL_PIN(20, "gpio20"),
+ PINCTRL_PIN(21, "gpio21"),
+ PINCTRL_PIN(22, "gpio22"),
+ PINCTRL_PIN(23, "gpio23"),
+ PINCTRL_PIN(24, "gpio24"),
+ PINCTRL_PIN(25, "gpio25"),
+ PINCTRL_PIN(26, "gpio26"),
+ PINCTRL_PIN(27, "gpio27"),
+ PINCTRL_PIN(28, "gpio28"),
+ PINCTRL_PIN(29, "gpio29"),
+ PINCTRL_PIN(30, "gpio30"),
+ PINCTRL_PIN(31, "gpio31"),
+
+ /*
+ * No idea where they really are; so let's put them according
+ * to their mux offsets.
+ */
+ PINCTRL_PIN(36, "hsspi_cs1"),
+ PINCTRL_PIN(38, "usb_p2"),
+};
+
+static unsigned gpio0_pins[] = { 0 };
+static unsigned gpio1_pins[] = { 1 };
+static unsigned gpio2_pins[] = { 2 };
+static unsigned gpio3_pins[] = { 3 };
+static unsigned gpio4_pins[] = { 4 };
+static unsigned gpio5_pins[] = { 5 };
+static unsigned gpio6_pins[] = { 6 };
+static unsigned gpio7_pins[] = { 7 };
+static unsigned gpio8_pins[] = { 8 };
+static unsigned gpio9_pins[] = { 9 };
+static unsigned gpio10_pins[] = { 10 };
+static unsigned gpio11_pins[] = { 11 };
+static unsigned gpio12_pins[] = { 12 };
+static unsigned gpio13_pins[] = { 13 };
+static unsigned gpio14_pins[] = { 14 };
+static unsigned gpio15_pins[] = { 15 };
+static unsigned gpio16_pins[] = { 16 };
+static unsigned gpio17_pins[] = { 17 };
+static unsigned gpio18_pins[] = { 18 };
+static unsigned gpio19_pins[] = { 19 };
+static unsigned gpio20_pins[] = { 20 };
+static unsigned gpio21_pins[] = { 21 };
+static unsigned gpio22_pins[] = { 22 };
+static unsigned gpio23_pins[] = { 23 };
+static unsigned gpio24_pins[] = { 24 };
+static unsigned gpio25_pins[] = { 25 };
+static unsigned gpio26_pins[] = { 26 };
+static unsigned gpio27_pins[] = { 27 };
+static unsigned gpio28_pins[] = { 28 };
+static unsigned gpio29_pins[] = { 29 };
+static unsigned gpio30_pins[] = { 30 };
+static unsigned gpio31_pins[] = { 31 };
+
+static unsigned hsspi_cs1_pins[] = { 36 };
+static unsigned usb_port1_pins[] = { 38 };
+
+#define BCM6328_GROUP(n) \
+ { \
+ .name = #n, \
+ .pins = n##_pins, \
+ .num_pins = ARRAY_SIZE(n##_pins), \
+ }
+
+static struct bcm6328_pingroup bcm6328_groups[] = {
+ BCM6328_GROUP(gpio0),
+ BCM6328_GROUP(gpio1),
+ BCM6328_GROUP(gpio2),
+ BCM6328_GROUP(gpio3),
+ BCM6328_GROUP(gpio4),
+ BCM6328_GROUP(gpio5),
+ BCM6328_GROUP(gpio6),
+ BCM6328_GROUP(gpio7),
+ BCM6328_GROUP(gpio8),
+ BCM6328_GROUP(gpio9),
+ BCM6328_GROUP(gpio10),
+ BCM6328_GROUP(gpio11),
+ BCM6328_GROUP(gpio12),
+ BCM6328_GROUP(gpio13),
+ BCM6328_GROUP(gpio14),
+ BCM6328_GROUP(gpio15),
+ BCM6328_GROUP(gpio16),
+ BCM6328_GROUP(gpio17),
+ BCM6328_GROUP(gpio18),
+ BCM6328_GROUP(gpio19),
+ BCM6328_GROUP(gpio20),
+ BCM6328_GROUP(gpio21),
+ BCM6328_GROUP(gpio22),
+ BCM6328_GROUP(gpio23),
+ BCM6328_GROUP(gpio24),
+ BCM6328_GROUP(gpio25),
+ BCM6328_GROUP(gpio26),
+ BCM6328_GROUP(gpio27),
+ BCM6328_GROUP(gpio28),
+ BCM6328_GROUP(gpio29),
+ BCM6328_GROUP(gpio30),
+ BCM6328_GROUP(gpio31),
+
+ BCM6328_GROUP(hsspi_cs1),
+ BCM6328_GROUP(usb_port1),
+};
+
+/* GPIO_MODE */
+static const char * const led_groups[] = {
+ "gpio0",
+ "gpio1",
+ "gpio2",
+ "gpio3",
+ "gpio4",
+ "gpio5",
+ "gpio6",
+ "gpio7",
+ "gpio8",
+ "gpio9",
+ "gpio10",
+ "gpio11",
+ "gpio12",
+ "gpio13",
+ "gpio14",
+ "gpio15",
+ "gpio16",
+ "gpio17",
+ "gpio18",
+ "gpio19",
+ "gpio20",
+ "gpio21",
+ "gpio22",
+ "gpio23",
+};
+
+/* PINMUX_SEL */
+static const char * const serial_led_data_groups[] = {
+ "gpio6",
+};
+
+static const char * const serial_led_clk_groups[] = {
+ "gpio7",
+};
+
+static const char * const inet_act_led_groups[] = {
+ "gpio11",
+};
+
+static const char * const pcie_clkreq_groups[] = {
+ "gpio16",
+};
+
+static const char * const ephy0_act_led_groups[] = {
+ "gpio25",
+};
+
+static const char * const ephy1_act_led_groups[] = {
+ "gpio26",
+};
+
+static const char * const ephy2_act_led_groups[] = {
+ "gpio27",
+};
+
+static const char * const ephy3_act_led_groups[] = {
+ "gpio28",
+};
+
+static const char * const hsspi_cs1_groups[] = {
+ "hsspi_cs1"
+};
+
+static const char * const usb_host_port_groups[] = {
+ "usb_port1",
+};
+
+static const char * const usb_device_port_groups[] = {
+ "usb_port1",
+};
+
+#define BCM6328_MODE_FUN(n) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .mode_val = 1, \
+ }
+
+#define BCM6328_MUX_FUN(n, mux) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .mux_val = mux, \
+ }
+
+static const struct bcm6328_function bcm6328_funcs[] = {
+ BCM6328_MODE_FUN(led),
+ BCM6328_MUX_FUN(serial_led_data, 2),
+ BCM6328_MUX_FUN(serial_led_clk, 2),
+ BCM6328_MUX_FUN(inet_act_led, 1),
+ BCM6328_MUX_FUN(pcie_clkreq, 2),
+ BCM6328_MUX_FUN(ephy0_act_led, 1),
+ BCM6328_MUX_FUN(ephy1_act_led, 1),
+ BCM6328_MUX_FUN(ephy2_act_led, 1),
+ BCM6328_MUX_FUN(ephy3_act_led, 1),
+ BCM6328_MUX_FUN(hsspi_cs1, 2),
+ BCM6328_MUX_FUN(usb_host_port, 1),
+ BCM6328_MUX_FUN(usb_device_port, 2),
+};
+
+static inline unsigned int bcm6328_mux_off(unsigned int pin)
+{
+ return bcm6328_mux[pin / 16];
+}
+
+static int bcm6328_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6328_groups);
+}
+
+static const char *bcm6328_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned group)
+{
+ return bcm6328_groups[group].name;
+}
+
+static int bcm6328_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned group, const unsigned **pins,
+ unsigned *num_pins)
+{
+ *pins = bcm6328_groups[group].pins;
+ *num_pins = bcm6328_groups[group].num_pins;
+
+ return 0;
+}
+
+static int bcm6328_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6328_funcs);
+}
+
+static const char *bcm6328_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return bcm6328_funcs[selector].name;
+}
+
+static int bcm6328_pinctrl_get_groups(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ *groups = bcm6328_funcs[selector].groups;
+ *num_groups = bcm6328_funcs[selector].num_groups;
+
+ return 0;
+}
+
+static void bcm6328_rmw_mux(struct bcm63xx_pinctrl *pc, unsigned pin,
+ unsigned int mode, unsigned int mux)
+{
+ if (pin < BCM6328_NUM_GPIOS)
+ regmap_update_bits(pc->regs, BCM6328_MODE_REG, BIT(pin),
+ mode ? BIT(pin) : 0);
+
+ regmap_update_bits(pc->regs, bcm6328_mux_off(pin),
+ BCM6328_MUX_MASK << ((pin % 16) * 2),
+ mux << ((pin % 16) * 2));
+}
+
+static int bcm6328_pinctrl_set_mux(struct pinctrl_dev *pctldev,
+ unsigned selector, unsigned group)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ const struct bcm6328_pingroup *pg = &bcm6328_groups[group];
+ const struct bcm6328_function *f = &bcm6328_funcs[selector];
+
+ bcm6328_rmw_mux(pc, pg->pins[0], f->mode_val, f->mux_val);
+
+ return 0;
+}
+
+static int bcm6328_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+
+ /* disable all functions using this pin */
+ bcm6328_rmw_mux(pc, offset, 0, 0);
+
+ return 0;
+}
+
+static struct pinctrl_ops bcm6328_pctl_ops = {
+ .dt_free_map = pinctrl_utils_free_map,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .get_group_name = bcm6328_pinctrl_get_group_name,
+ .get_group_pins = bcm6328_pinctrl_get_group_pins,
+ .get_groups_count = bcm6328_pinctrl_get_group_count,
+};
+
+static struct pinmux_ops bcm6328_pmx_ops = {
+ .get_function_groups = bcm6328_pinctrl_get_groups,
+ .get_function_name = bcm6328_pinctrl_get_func_name,
+ .get_functions_count = bcm6328_pinctrl_get_func_count,
+ .gpio_request_enable = bcm6328_gpio_request_enable,
+ .set_mux = bcm6328_pinctrl_set_mux,
+ .strict = true,
+};
+
+static const struct bcm63xx_pinctrl_soc bcm6328_soc = {
+ .ngpios = BCM6328_NUM_GPIOS,
+ .npins = ARRAY_SIZE(bcm6328_pins),
+ .pctl_ops = &bcm6328_pctl_ops,
+ .pins = bcm6328_pins,
+ .pmx_ops = &bcm6328_pmx_ops,
+};
+
+static int bcm6328_pinctrl_probe(struct platform_device *pdev)
+{
+ return bcm63xx_pinctrl_probe(pdev, &bcm6328_soc, NULL);
+}
+
+static const struct of_device_id bcm6328_pinctrl_match[] = {
+ { .compatible = "brcm,bcm6328-pinctrl", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver bcm6328_pinctrl_driver = {
+ .probe = bcm6328_pinctrl_probe,
+ .driver = {
+ .name = "bcm6328-pinctrl",
+ .of_match_table = bcm6328_pinctrl_match,
+ },
+};
+
+builtin_platform_driver(bcm6328_pinctrl_driver);
--
2.20.1
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v5 05/15] pinctrl: add a pincontrol driver for BCM6328
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
0 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add a pincontrol driver for BCM6328. BCM6328 supports muxing 32 pins as
GPIOs, as LEDs for the integrated LED controller, or various other
functions. Its pincontrol mux registers also control other aspects, like
switching the second USB port between host and device mode.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: add changes suggested by Andy Shevchenko
v4: no changes
v3: use new shared code
v2: switch to GPIO_REGMAP
drivers/pinctrl/bcm/Kconfig | 8 +
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-bcm6328.c | 404 ++++++++++++++++++++++++++
3 files changed, 413 insertions(+)
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6328.c
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index 882f19bdc243..d35e5d3fe26f 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -36,6 +36,14 @@ config PINCTRL_BCM63XX
select PINCONF
select PINMUX
+config PINCTRL_BCM6328
+ bool "Broadcom BCM6328 GPIO driver"
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
+ select PINCTRL_BCM63XX
+ default BMIPS_GENERIC
+ help
+ Say Y here to enable the Broadcom BCM6328 GPIO driver.
+
config PINCTRL_IPROC_GPIO
bool "Broadcom iProc GPIO (with PINCONF) driver"
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index 0e3cf9b15c65..57e5434a6db6 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
+obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o
obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm6328.c b/drivers/pinctrl/bcm/pinctrl-bcm6328.c
new file mode 100644
index 000000000000..c9efce600550
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6328.c
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for BCM6328 GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "../pinctrl-utils.h"
+
+#include "pinctrl-bcm63xx.h"
+
+#define BCM6328_NUM_GPIOS 32
+
+#define BCM6328_MODE_REG 0x18
+#define BCM6328_MUX_HI_REG 0x1c
+#define BCM6328_MUX_LO_REG 0x20
+#define BCM6328_MUX_OTHER_REG 0x24
+#define BCM6328_MUX_MASK GENMASK(1, 0)
+
+struct bcm6328_pingroup {
+ const char *name;
+ const unsigned * const pins;
+ const unsigned num_pins;
+};
+
+struct bcm6328_function {
+ const char *name;
+ const char * const *groups;
+ const unsigned num_groups;
+
+ unsigned mode_val:1;
+ unsigned mux_val:2;
+};
+
+static const unsigned int bcm6328_mux[] = {
+ BCM6328_MUX_LO_REG,
+ BCM6328_MUX_HI_REG,
+ BCM6328_MUX_OTHER_REG
+};
+
+static const struct pinctrl_pin_desc bcm6328_pins[] = {
+ PINCTRL_PIN(0, "gpio0"),
+ PINCTRL_PIN(1, "gpio1"),
+ PINCTRL_PIN(2, "gpio2"),
+ PINCTRL_PIN(3, "gpio3"),
+ PINCTRL_PIN(4, "gpio4"),
+ PINCTRL_PIN(5, "gpio5"),
+ PINCTRL_PIN(6, "gpio6"),
+ PINCTRL_PIN(7, "gpio7"),
+ PINCTRL_PIN(8, "gpio8"),
+ PINCTRL_PIN(9, "gpio9"),
+ PINCTRL_PIN(10, "gpio10"),
+ PINCTRL_PIN(11, "gpio11"),
+ PINCTRL_PIN(12, "gpio12"),
+ PINCTRL_PIN(13, "gpio13"),
+ PINCTRL_PIN(14, "gpio14"),
+ PINCTRL_PIN(15, "gpio15"),
+ PINCTRL_PIN(16, "gpio16"),
+ PINCTRL_PIN(17, "gpio17"),
+ PINCTRL_PIN(18, "gpio18"),
+ PINCTRL_PIN(19, "gpio19"),
+ PINCTRL_PIN(20, "gpio20"),
+ PINCTRL_PIN(21, "gpio21"),
+ PINCTRL_PIN(22, "gpio22"),
+ PINCTRL_PIN(23, "gpio23"),
+ PINCTRL_PIN(24, "gpio24"),
+ PINCTRL_PIN(25, "gpio25"),
+ PINCTRL_PIN(26, "gpio26"),
+ PINCTRL_PIN(27, "gpio27"),
+ PINCTRL_PIN(28, "gpio28"),
+ PINCTRL_PIN(29, "gpio29"),
+ PINCTRL_PIN(30, "gpio30"),
+ PINCTRL_PIN(31, "gpio31"),
+
+ /*
+ * No idea where they really are; so let's put them according
+ * to their mux offsets.
+ */
+ PINCTRL_PIN(36, "hsspi_cs1"),
+ PINCTRL_PIN(38, "usb_p2"),
+};
+
+static unsigned gpio0_pins[] = { 0 };
+static unsigned gpio1_pins[] = { 1 };
+static unsigned gpio2_pins[] = { 2 };
+static unsigned gpio3_pins[] = { 3 };
+static unsigned gpio4_pins[] = { 4 };
+static unsigned gpio5_pins[] = { 5 };
+static unsigned gpio6_pins[] = { 6 };
+static unsigned gpio7_pins[] = { 7 };
+static unsigned gpio8_pins[] = { 8 };
+static unsigned gpio9_pins[] = { 9 };
+static unsigned gpio10_pins[] = { 10 };
+static unsigned gpio11_pins[] = { 11 };
+static unsigned gpio12_pins[] = { 12 };
+static unsigned gpio13_pins[] = { 13 };
+static unsigned gpio14_pins[] = { 14 };
+static unsigned gpio15_pins[] = { 15 };
+static unsigned gpio16_pins[] = { 16 };
+static unsigned gpio17_pins[] = { 17 };
+static unsigned gpio18_pins[] = { 18 };
+static unsigned gpio19_pins[] = { 19 };
+static unsigned gpio20_pins[] = { 20 };
+static unsigned gpio21_pins[] = { 21 };
+static unsigned gpio22_pins[] = { 22 };
+static unsigned gpio23_pins[] = { 23 };
+static unsigned gpio24_pins[] = { 24 };
+static unsigned gpio25_pins[] = { 25 };
+static unsigned gpio26_pins[] = { 26 };
+static unsigned gpio27_pins[] = { 27 };
+static unsigned gpio28_pins[] = { 28 };
+static unsigned gpio29_pins[] = { 29 };
+static unsigned gpio30_pins[] = { 30 };
+static unsigned gpio31_pins[] = { 31 };
+
+static unsigned hsspi_cs1_pins[] = { 36 };
+static unsigned usb_port1_pins[] = { 38 };
+
+#define BCM6328_GROUP(n) \
+ { \
+ .name = #n, \
+ .pins = n##_pins, \
+ .num_pins = ARRAY_SIZE(n##_pins), \
+ }
+
+static struct bcm6328_pingroup bcm6328_groups[] = {
+ BCM6328_GROUP(gpio0),
+ BCM6328_GROUP(gpio1),
+ BCM6328_GROUP(gpio2),
+ BCM6328_GROUP(gpio3),
+ BCM6328_GROUP(gpio4),
+ BCM6328_GROUP(gpio5),
+ BCM6328_GROUP(gpio6),
+ BCM6328_GROUP(gpio7),
+ BCM6328_GROUP(gpio8),
+ BCM6328_GROUP(gpio9),
+ BCM6328_GROUP(gpio10),
+ BCM6328_GROUP(gpio11),
+ BCM6328_GROUP(gpio12),
+ BCM6328_GROUP(gpio13),
+ BCM6328_GROUP(gpio14),
+ BCM6328_GROUP(gpio15),
+ BCM6328_GROUP(gpio16),
+ BCM6328_GROUP(gpio17),
+ BCM6328_GROUP(gpio18),
+ BCM6328_GROUP(gpio19),
+ BCM6328_GROUP(gpio20),
+ BCM6328_GROUP(gpio21),
+ BCM6328_GROUP(gpio22),
+ BCM6328_GROUP(gpio23),
+ BCM6328_GROUP(gpio24),
+ BCM6328_GROUP(gpio25),
+ BCM6328_GROUP(gpio26),
+ BCM6328_GROUP(gpio27),
+ BCM6328_GROUP(gpio28),
+ BCM6328_GROUP(gpio29),
+ BCM6328_GROUP(gpio30),
+ BCM6328_GROUP(gpio31),
+
+ BCM6328_GROUP(hsspi_cs1),
+ BCM6328_GROUP(usb_port1),
+};
+
+/* GPIO_MODE */
+static const char * const led_groups[] = {
+ "gpio0",
+ "gpio1",
+ "gpio2",
+ "gpio3",
+ "gpio4",
+ "gpio5",
+ "gpio6",
+ "gpio7",
+ "gpio8",
+ "gpio9",
+ "gpio10",
+ "gpio11",
+ "gpio12",
+ "gpio13",
+ "gpio14",
+ "gpio15",
+ "gpio16",
+ "gpio17",
+ "gpio18",
+ "gpio19",
+ "gpio20",
+ "gpio21",
+ "gpio22",
+ "gpio23",
+};
+
+/* PINMUX_SEL */
+static const char * const serial_led_data_groups[] = {
+ "gpio6",
+};
+
+static const char * const serial_led_clk_groups[] = {
+ "gpio7",
+};
+
+static const char * const inet_act_led_groups[] = {
+ "gpio11",
+};
+
+static const char * const pcie_clkreq_groups[] = {
+ "gpio16",
+};
+
+static const char * const ephy0_act_led_groups[] = {
+ "gpio25",
+};
+
+static const char * const ephy1_act_led_groups[] = {
+ "gpio26",
+};
+
+static const char * const ephy2_act_led_groups[] = {
+ "gpio27",
+};
+
+static const char * const ephy3_act_led_groups[] = {
+ "gpio28",
+};
+
+static const char * const hsspi_cs1_groups[] = {
+ "hsspi_cs1"
+};
+
+static const char * const usb_host_port_groups[] = {
+ "usb_port1",
+};
+
+static const char * const usb_device_port_groups[] = {
+ "usb_port1",
+};
+
+#define BCM6328_MODE_FUN(n) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .mode_val = 1, \
+ }
+
+#define BCM6328_MUX_FUN(n, mux) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .mux_val = mux, \
+ }
+
+static const struct bcm6328_function bcm6328_funcs[] = {
+ BCM6328_MODE_FUN(led),
+ BCM6328_MUX_FUN(serial_led_data, 2),
+ BCM6328_MUX_FUN(serial_led_clk, 2),
+ BCM6328_MUX_FUN(inet_act_led, 1),
+ BCM6328_MUX_FUN(pcie_clkreq, 2),
+ BCM6328_MUX_FUN(ephy0_act_led, 1),
+ BCM6328_MUX_FUN(ephy1_act_led, 1),
+ BCM6328_MUX_FUN(ephy2_act_led, 1),
+ BCM6328_MUX_FUN(ephy3_act_led, 1),
+ BCM6328_MUX_FUN(hsspi_cs1, 2),
+ BCM6328_MUX_FUN(usb_host_port, 1),
+ BCM6328_MUX_FUN(usb_device_port, 2),
+};
+
+static inline unsigned int bcm6328_mux_off(unsigned int pin)
+{
+ return bcm6328_mux[pin / 16];
+}
+
+static int bcm6328_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6328_groups);
+}
+
+static const char *bcm6328_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned group)
+{
+ return bcm6328_groups[group].name;
+}
+
+static int bcm6328_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned group, const unsigned **pins,
+ unsigned *num_pins)
+{
+ *pins = bcm6328_groups[group].pins;
+ *num_pins = bcm6328_groups[group].num_pins;
+
+ return 0;
+}
+
+static int bcm6328_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6328_funcs);
+}
+
+static const char *bcm6328_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return bcm6328_funcs[selector].name;
+}
+
+static int bcm6328_pinctrl_get_groups(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ *groups = bcm6328_funcs[selector].groups;
+ *num_groups = bcm6328_funcs[selector].num_groups;
+
+ return 0;
+}
+
+static void bcm6328_rmw_mux(struct bcm63xx_pinctrl *pc, unsigned pin,
+ unsigned int mode, unsigned int mux)
+{
+ if (pin < BCM6328_NUM_GPIOS)
+ regmap_update_bits(pc->regs, BCM6328_MODE_REG, BIT(pin),
+ mode ? BIT(pin) : 0);
+
+ regmap_update_bits(pc->regs, bcm6328_mux_off(pin),
+ BCM6328_MUX_MASK << ((pin % 16) * 2),
+ mux << ((pin % 16) * 2));
+}
+
+static int bcm6328_pinctrl_set_mux(struct pinctrl_dev *pctldev,
+ unsigned selector, unsigned group)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ const struct bcm6328_pingroup *pg = &bcm6328_groups[group];
+ const struct bcm6328_function *f = &bcm6328_funcs[selector];
+
+ bcm6328_rmw_mux(pc, pg->pins[0], f->mode_val, f->mux_val);
+
+ return 0;
+}
+
+static int bcm6328_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+
+ /* disable all functions using this pin */
+ bcm6328_rmw_mux(pc, offset, 0, 0);
+
+ return 0;
+}
+
+static struct pinctrl_ops bcm6328_pctl_ops = {
+ .dt_free_map = pinctrl_utils_free_map,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .get_group_name = bcm6328_pinctrl_get_group_name,
+ .get_group_pins = bcm6328_pinctrl_get_group_pins,
+ .get_groups_count = bcm6328_pinctrl_get_group_count,
+};
+
+static struct pinmux_ops bcm6328_pmx_ops = {
+ .get_function_groups = bcm6328_pinctrl_get_groups,
+ .get_function_name = bcm6328_pinctrl_get_func_name,
+ .get_functions_count = bcm6328_pinctrl_get_func_count,
+ .gpio_request_enable = bcm6328_gpio_request_enable,
+ .set_mux = bcm6328_pinctrl_set_mux,
+ .strict = true,
+};
+
+static const struct bcm63xx_pinctrl_soc bcm6328_soc = {
+ .ngpios = BCM6328_NUM_GPIOS,
+ .npins = ARRAY_SIZE(bcm6328_pins),
+ .pctl_ops = &bcm6328_pctl_ops,
+ .pins = bcm6328_pins,
+ .pmx_ops = &bcm6328_pmx_ops,
+};
+
+static int bcm6328_pinctrl_probe(struct platform_device *pdev)
+{
+ return bcm63xx_pinctrl_probe(pdev, &bcm6328_soc, NULL);
+}
+
+static const struct of_device_id bcm6328_pinctrl_match[] = {
+ { .compatible = "brcm,bcm6328-pinctrl", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver bcm6328_pinctrl_driver = {
+ .probe = bcm6328_pinctrl_probe,
+ .driver = {
+ .name = "bcm6328-pinctrl",
+ .of_match_table = bcm6328_pinctrl_match,
+ },
+};
+
+builtin_platform_driver(bcm6328_pinctrl_driver);
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v5 06/15] dt-bindings: add BCM6358 pincontroller binding documentation
2021-03-06 15:56 ` Álvaro Fernández Rojas
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
-1 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add binding documentation for the pincontrol core found in BCM6358 SoCs.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: change Documentation to dt-bindings in commit title
v4: no changes
v3: add new gpio node
v2: remove interrupts
.../pinctrl/brcm,bcm6358-pinctrl.yaml | 137 ++++++++++++++++++
1 file changed, 137 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
new file mode 100644
index 000000000000..eb14dd4cdaaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6358-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6358 pin controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |+
+ The pin controller node should be the child of a syscon node.
+
+ Refer to the the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+ compatible:
+ const: brcm,bcm6358-pinctrl
+
+patternProperties:
+ '^gpio$':
+ type: object
+ properties:
+ compatible:
+ const: brcm,bcm6358-gpio
+
+ data:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the data register (in bytes).
+
+ dirout:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the dirout register (in bytes).
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ required:
+ - gpio-controller
+ - gpio-ranges
+ - '#gpio-cells'
+
+ '^.*$':
+ if:
+ type: object
+ then:
+ properties:
+ function:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ ebi_cs, uart1, serial_led, legacy_led, led, spi_cs, utopia,
+ pwm_syn_clk, sys_irq ]
+
+ pins:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ ebi_cs_grp, uart1_grp, serial_led_grp, legacy_led_grp,
+ led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ]
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio_cntl@fffe0080 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0xfffe0080 0x80>;
+
+ pinctrl: pinctrl {
+ compatible = "brcm,bcm6358-pinctrl";
+
+ gpio {
+ compatible = "brcm,bcm6358-gpio";
+ data = <0xc>;
+ dirout = <0x4>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 40>;
+ #gpio-cells = <2>;
+ };
+
+ pinctrl_ebi_cs: ebi_cs {
+ function = "ebi_cs";
+ groups = "ebi_cs_grp";
+ };
+
+ pinctrl_uart1: uart1 {
+ function = "uart1";
+ groups = "uart1_grp";
+ };
+
+ pinctrl_serial_led: serial_led {
+ function = "serial_led";
+ groups = "serial_led_grp";
+ };
+
+ pinctrl_legacy_led: legacy_led {
+ function = "legacy_led";
+ groups = "legacy_led_grp";
+ };
+
+ pinctrl_led: led {
+ function = "led";
+ groups = "led_grp";
+ };
+
+ pinctrl_spi_cs_23: spi_cs {
+ function = "spi_cs";
+ groups = "spi_cs_grp";
+ };
+
+ pinctrl_utopia: utopia {
+ function = "utopia";
+ groups = "utopia_grp";
+ };
+
+ pinctrl_pwm_syn_clk: pwm_syn_clk {
+ function = "pwm_syn_clk";
+ groups = "pwm_syn_clk_grp";
+ };
+
+ pinctrl_sys_irq: sys_irq {
+ function = "sys_irq";
+ groups = "sys_irq_grp";
+ };
+ };
+ };
--
2.20.1
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v5 06/15] dt-bindings: add BCM6358 pincontroller binding documentation
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
0 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add binding documentation for the pincontrol core found in BCM6358 SoCs.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: change Documentation to dt-bindings in commit title
v4: no changes
v3: add new gpio node
v2: remove interrupts
.../pinctrl/brcm,bcm6358-pinctrl.yaml | 137 ++++++++++++++++++
1 file changed, 137 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
new file mode 100644
index 000000000000..eb14dd4cdaaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6358-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6358 pin controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |+
+ The pin controller node should be the child of a syscon node.
+
+ Refer to the the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+ compatible:
+ const: brcm,bcm6358-pinctrl
+
+patternProperties:
+ '^gpio$':
+ type: object
+ properties:
+ compatible:
+ const: brcm,bcm6358-gpio
+
+ data:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the data register (in bytes).
+
+ dirout:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the dirout register (in bytes).
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ required:
+ - gpio-controller
+ - gpio-ranges
+ - '#gpio-cells'
+
+ '^.*$':
+ if:
+ type: object
+ then:
+ properties:
+ function:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ ebi_cs, uart1, serial_led, legacy_led, led, spi_cs, utopia,
+ pwm_syn_clk, sys_irq ]
+
+ pins:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ ebi_cs_grp, uart1_grp, serial_led_grp, legacy_led_grp,
+ led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ]
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio_cntl@fffe0080 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0xfffe0080 0x80>;
+
+ pinctrl: pinctrl {
+ compatible = "brcm,bcm6358-pinctrl";
+
+ gpio {
+ compatible = "brcm,bcm6358-gpio";
+ data = <0xc>;
+ dirout = <0x4>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 40>;
+ #gpio-cells = <2>;
+ };
+
+ pinctrl_ebi_cs: ebi_cs {
+ function = "ebi_cs";
+ groups = "ebi_cs_grp";
+ };
+
+ pinctrl_uart1: uart1 {
+ function = "uart1";
+ groups = "uart1_grp";
+ };
+
+ pinctrl_serial_led: serial_led {
+ function = "serial_led";
+ groups = "serial_led_grp";
+ };
+
+ pinctrl_legacy_led: legacy_led {
+ function = "legacy_led";
+ groups = "legacy_led_grp";
+ };
+
+ pinctrl_led: led {
+ function = "led";
+ groups = "led_grp";
+ };
+
+ pinctrl_spi_cs_23: spi_cs {
+ function = "spi_cs";
+ groups = "spi_cs_grp";
+ };
+
+ pinctrl_utopia: utopia {
+ function = "utopia";
+ groups = "utopia_grp";
+ };
+
+ pinctrl_pwm_syn_clk: pwm_syn_clk {
+ function = "pwm_syn_clk";
+ groups = "pwm_syn_clk_grp";
+ };
+
+ pinctrl_sys_irq: sys_irq {
+ function = "sys_irq";
+ groups = "sys_irq_grp";
+ };
+ };
+ };
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v5 07/15] pinctrl: add a pincontrol driver for BCM6358
2021-03-06 15:56 ` Álvaro Fernández Rojas
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
-1 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add a pincotrol driver for BCM6358. BCM6358 allow overlaying different
functions onto the GPIO pins. It does not support configuring individual
pins but only whole groups. These groups may overlap, and still require
the directions to be set correctly in the GPIO register. In addition the
functions register controls other, not directly mux related functions.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: add changes suggested by Andy Shevchenko
v4: no changes
v3: use new shared code
v2: switch to GPIO_REGMAP
drivers/pinctrl/bcm/Kconfig | 8 +
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-bcm6358.c | 369 ++++++++++++++++++++++++++
3 files changed, 378 insertions(+)
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6358.c
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index d35e5d3fe26f..ced7cc6ab44f 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -44,6 +44,14 @@ config PINCTRL_BCM6328
help
Say Y here to enable the Broadcom BCM6328 GPIO driver.
+config PINCTRL_BCM6358
+ bool "Broadcom BCM6358 GPIO driver"
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
+ select PINCTRL_BCM63XX
+ default BMIPS_GENERIC
+ help
+ Say Y here to enable the Broadcom BCM6358 GPIO driver.
+
config PINCTRL_IPROC_GPIO
bool "Broadcom iProc GPIO (with PINCONF) driver"
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index 57e5434a6db6..c3f5b7b2f2f0 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
+obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o
obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm6358.c b/drivers/pinctrl/bcm/pinctrl-bcm6358.c
new file mode 100644
index 000000000000..d638578727f3
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6358.c
@@ -0,0 +1,369 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for BCM6358 GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "../pinctrl-utils.h"
+
+#include "pinctrl-bcm63xx.h"
+
+#define BCM6358_NUM_GPIOS 40
+
+#define BCM6358_MODE_REG 0x18
+#define BCM6358_MODE_MUX_NONE 0
+#define BCM6358_MODE_MUX_EBI_CS BIT(5)
+#define BCM6358_MODE_MUX_UART1 BIT(6)
+#define BCM6358_MODE_MUX_SPI_CS BIT(7)
+#define BCM6358_MODE_MUX_ASYNC_MODEM BIT(8)
+#define BCM6358_MODE_MUX_LEGACY_LED BIT(9)
+#define BCM6358_MODE_MUX_SERIAL_LED BIT(10)
+#define BCM6358_MODE_MUX_LED BIT(11)
+#define BCM6358_MODE_MUX_UTOPIA BIT(12)
+#define BCM6358_MODE_MUX_CLKRST BIT(13)
+#define BCM6358_MODE_MUX_PWM_SYN_CLK BIT(14)
+#define BCM6358_MODE_MUX_SYS_IRQ BIT(15)
+
+struct bcm6358_pingroup {
+ const char *name;
+ const unsigned * const pins;
+ const unsigned num_pins;
+
+ const uint16_t mode_val;
+
+ /* non-GPIO function muxes require the gpio direction to be set */
+ const uint16_t direction;
+};
+
+struct bcm6358_function {
+ const char *name;
+ const char * const *groups;
+ const unsigned num_groups;
+};
+
+struct bcm6358_priv {
+ struct regmap_field *overlays;
+};
+
+#define BCM6358_GPIO_PIN(a, b, bit1, bit2, bit3) \
+ { \
+ .number = a, \
+ .name = b, \
+ .drv_data = (void *)(BCM6358_MODE_MUX_##bit1 | \
+ BCM6358_MODE_MUX_##bit2 | \
+ BCM6358_MODE_MUX_##bit3), \
+ }
+
+static const struct pinctrl_pin_desc bcm6358_pins[] = {
+ BCM6358_GPIO_PIN(0, "gpio0", LED, NONE, NONE),
+ BCM6358_GPIO_PIN(1, "gpio1", LED, NONE, NONE),
+ BCM6358_GPIO_PIN(2, "gpio2", LED, NONE, NONE),
+ BCM6358_GPIO_PIN(3, "gpio3", LED, NONE, NONE),
+ PINCTRL_PIN(4, "gpio4"),
+ BCM6358_GPIO_PIN(5, "gpio5", SYS_IRQ, NONE, NONE),
+ BCM6358_GPIO_PIN(6, "gpio6", SERIAL_LED, NONE, NONE),
+ BCM6358_GPIO_PIN(7, "gpio7", SERIAL_LED, NONE, NONE),
+ BCM6358_GPIO_PIN(8, "gpio8", PWM_SYN_CLK, NONE, NONE),
+ BCM6358_GPIO_PIN(9, "gpio09", LEGACY_LED, NONE, NONE),
+ BCM6358_GPIO_PIN(10, "gpio10", LEGACY_LED, NONE, NONE),
+ BCM6358_GPIO_PIN(11, "gpio11", LEGACY_LED, NONE, NONE),
+ BCM6358_GPIO_PIN(12, "gpio12", LEGACY_LED, ASYNC_MODEM, UTOPIA),
+ BCM6358_GPIO_PIN(13, "gpio13", LEGACY_LED, ASYNC_MODEM, UTOPIA),
+ BCM6358_GPIO_PIN(14, "gpio14", LEGACY_LED, ASYNC_MODEM, UTOPIA),
+ BCM6358_GPIO_PIN(15, "gpio15", LEGACY_LED, ASYNC_MODEM, UTOPIA),
+ PINCTRL_PIN(16, "gpio16"),
+ PINCTRL_PIN(17, "gpio17"),
+ PINCTRL_PIN(18, "gpio18"),
+ PINCTRL_PIN(19, "gpio19"),
+ PINCTRL_PIN(20, "gpio20"),
+ PINCTRL_PIN(21, "gpio21"),
+ BCM6358_GPIO_PIN(22, "gpio22", UTOPIA, NONE, NONE),
+ BCM6358_GPIO_PIN(23, "gpio23", UTOPIA, NONE, NONE),
+ BCM6358_GPIO_PIN(24, "gpio24", UTOPIA, NONE, NONE),
+ BCM6358_GPIO_PIN(25, "gpio25", UTOPIA, NONE, NONE),
+ BCM6358_GPIO_PIN(26, "gpio26", UTOPIA, NONE, NONE),
+ BCM6358_GPIO_PIN(27, "gpio27", UTOPIA, NONE, NONE),
+ BCM6358_GPIO_PIN(28, "gpio28", UTOPIA, UART1, NONE),
+ BCM6358_GPIO_PIN(29, "gpio29", UTOPIA, UART1, NONE),
+ BCM6358_GPIO_PIN(30, "gpio30", UTOPIA, UART1, EBI_CS),
+ BCM6358_GPIO_PIN(31, "gpio31", UTOPIA, UART1, EBI_CS),
+ BCM6358_GPIO_PIN(32, "gpio32", SPI_CS, NONE, NONE),
+ BCM6358_GPIO_PIN(33, "gpio33", SPI_CS, NONE, NONE),
+ PINCTRL_PIN(34, "gpio34"),
+ PINCTRL_PIN(35, "gpio35"),
+ PINCTRL_PIN(36, "gpio36"),
+ PINCTRL_PIN(37, "gpio37"),
+ PINCTRL_PIN(38, "gpio38"),
+ PINCTRL_PIN(39, "gpio39"),
+};
+
+static unsigned ebi_cs_grp_pins[] = { 30, 31 };
+
+static unsigned uart1_grp_pins[] = { 28, 29, 30, 31 };
+
+static unsigned spi_cs_grp_pins[] = { 32, 33 };
+
+static unsigned async_modem_grp_pins[] = { 12, 13, 14, 15 };
+
+static unsigned serial_led_grp_pins[] = { 6, 7 };
+
+static unsigned legacy_led_grp_pins[] = { 9, 10, 11, 12, 13, 14, 15 };
+
+static unsigned led_grp_pins[] = { 0, 1, 2, 3 };
+
+static unsigned utopia_grp_pins[] = {
+ 12, 13, 14, 15, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+};
+
+static unsigned pwm_syn_clk_grp_pins[] = { 8 };
+
+static unsigned sys_irq_grp_pins[] = { 5 };
+
+#define BCM6358_GPIO_MUX_GROUP(n, bit, dir) \
+ { \
+ .name = #n, \
+ .pins = n##_pins, \
+ .num_pins = ARRAY_SIZE(n##_pins), \
+ .mode_val = BCM6358_MODE_MUX_##bit, \
+ .direction = dir, \
+ }
+
+static const struct bcm6358_pingroup bcm6358_groups[] = {
+ BCM6358_GPIO_MUX_GROUP(ebi_cs_grp, EBI_CS, 0x3),
+ BCM6358_GPIO_MUX_GROUP(uart1_grp, UART1, 0x2),
+ BCM6358_GPIO_MUX_GROUP(spi_cs_grp, SPI_CS, 0x6),
+ BCM6358_GPIO_MUX_GROUP(async_modem_grp, ASYNC_MODEM, 0x6),
+ BCM6358_GPIO_MUX_GROUP(legacy_led_grp, LEGACY_LED, 0x7f),
+ BCM6358_GPIO_MUX_GROUP(serial_led_grp, SERIAL_LED, 0x3),
+ BCM6358_GPIO_MUX_GROUP(led_grp, LED, 0xf),
+ BCM6358_GPIO_MUX_GROUP(utopia_grp, UTOPIA, 0x000f),
+ BCM6358_GPIO_MUX_GROUP(pwm_syn_clk_grp, PWM_SYN_CLK, 0x1),
+ BCM6358_GPIO_MUX_GROUP(sys_irq_grp, SYS_IRQ, 0x1),
+};
+
+static const char * const ebi_cs_groups[] = {
+ "ebi_cs_grp"
+};
+
+static const char * const uart1_groups[] = {
+ "uart1_grp"
+};
+
+static const char * const spi_cs_2_3_groups[] = {
+ "spi_cs_2_3_grp"
+};
+
+static const char * const async_modem_groups[] = {
+ "async_modem_grp"
+};
+
+static const char * const legacy_led_groups[] = {
+ "legacy_led_grp",
+};
+
+static const char * const serial_led_groups[] = {
+ "serial_led_grp",
+};
+
+static const char * const led_groups[] = {
+ "led_grp",
+};
+
+static const char * const clkrst_groups[] = {
+ "clkrst_grp",
+};
+
+static const char * const pwm_syn_clk_groups[] = {
+ "pwm_syn_clk_grp",
+};
+
+static const char * const sys_irq_groups[] = {
+ "sys_irq_grp",
+};
+
+#define BCM6358_FUN(n) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ }
+
+static const struct bcm6358_function bcm6358_funcs[] = {
+ BCM6358_FUN(ebi_cs),
+ BCM6358_FUN(uart1),
+ BCM6358_FUN(spi_cs_2_3),
+ BCM6358_FUN(async_modem),
+ BCM6358_FUN(legacy_led),
+ BCM6358_FUN(serial_led),
+ BCM6358_FUN(led),
+ BCM6358_FUN(clkrst),
+ BCM6358_FUN(pwm_syn_clk),
+ BCM6358_FUN(sys_irq),
+};
+
+static int bcm6358_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6358_groups);
+}
+
+static const char *bcm6358_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned group)
+{
+ return bcm6358_groups[group].name;
+}
+
+static int bcm6358_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned group, const unsigned **pins,
+ unsigned *num_pins)
+{
+ *pins = bcm6358_groups[group].pins;
+ *num_pins = bcm6358_groups[group].num_pins;
+
+ return 0;
+}
+
+static int bcm6358_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6358_funcs);
+}
+
+static const char *bcm6358_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return bcm6358_funcs[selector].name;
+}
+
+static int bcm6358_pinctrl_get_groups(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ *groups = bcm6358_funcs[selector].groups;
+ *num_groups = bcm6358_funcs[selector].num_groups;
+
+ return 0;
+}
+
+static int bcm6358_pinctrl_set_mux(struct pinctrl_dev *pctldev,
+ unsigned selector, unsigned group)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ struct bcm6358_priv *priv = pc->driver_data;
+ const struct bcm6358_pingroup *pg = &bcm6358_groups[group];
+ unsigned int val = pg->mode_val;
+ unsigned int mask = val;
+ unsigned pin;
+
+ for (pin = 0; pin < pg->num_pins; pin++)
+ mask |= (unsigned long)bcm6358_pins[pin].drv_data;
+
+ regmap_field_update_bits(priv->overlays, mask, val);
+
+ for (pin = 0; pin < pg->num_pins; pin++) {
+ struct pinctrl_gpio_range *range;
+ unsigned int hw_gpio = bcm6358_pins[pin].number;
+
+ range = pinctrl_find_gpio_range_from_pin(pctldev, hw_gpio);
+ if (range) {
+ struct gpio_chip *gc = range->gc;
+
+ if (pg->direction & BIT(pin))
+ gc->direction_output(gc, hw_gpio, 0);
+ else
+ gc->direction_input(gc, hw_gpio);
+ }
+ }
+
+ return 0;
+}
+
+static int bcm6358_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ struct bcm6358_priv *priv = pc->driver_data;
+ unsigned int mask;
+
+ mask = (unsigned long) bcm6358_pins[offset].drv_data;
+ if (!mask)
+ return 0;
+
+ /* disable all functions using this pin */
+ return regmap_field_update_bits(priv->overlays, mask, 0);
+}
+
+static struct pinctrl_ops bcm6358_pctl_ops = {
+ .dt_free_map = pinctrl_utils_free_map,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .get_group_name = bcm6358_pinctrl_get_group_name,
+ .get_group_pins = bcm6358_pinctrl_get_group_pins,
+ .get_groups_count = bcm6358_pinctrl_get_group_count,
+};
+
+static struct pinmux_ops bcm6358_pmx_ops = {
+ .get_function_groups = bcm6358_pinctrl_get_groups,
+ .get_function_name = bcm6358_pinctrl_get_func_name,
+ .get_functions_count = bcm6358_pinctrl_get_func_count,
+ .gpio_request_enable = bcm6358_gpio_request_enable,
+ .set_mux = bcm6358_pinctrl_set_mux,
+ .strict = true,
+};
+
+static const struct bcm63xx_pinctrl_soc bcm6358_soc = {
+ .ngpios = BCM6358_NUM_GPIOS,
+ .npins = ARRAY_SIZE(bcm6358_pins),
+ .pctl_ops = &bcm6358_pctl_ops,
+ .pins = bcm6358_pins,
+ .pmx_ops = &bcm6358_pmx_ops,
+};
+
+static int bcm6358_pinctrl_probe(struct platform_device *pdev)
+{
+ struct reg_field overlays = REG_FIELD(BCM6358_MODE_REG, 0, 15);
+ struct device *dev = &pdev->dev;
+ struct bcm63xx_pinctrl *pc;
+ struct bcm6358_priv *priv;
+ int err;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ err = bcm63xx_pinctrl_probe(pdev, &bcm6358_soc, (void *) priv);
+ if (err)
+ return err;
+
+ pc = platform_get_drvdata(pdev);
+
+ priv->overlays = devm_regmap_field_alloc(dev, pc->regs, overlays);
+ if (IS_ERR(priv->overlays))
+ return PTR_ERR(priv->overlays);
+
+ return 0;
+}
+
+static const struct of_device_id bcm6358_pinctrl_match[] = {
+ { .compatible = "brcm,bcm6358-pinctrl", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver bcm6358_pinctrl_driver = {
+ .probe = bcm6358_pinctrl_probe,
+ .driver = {
+ .name = "bcm6358-pinctrl",
+ .of_match_table = bcm6358_pinctrl_match,
+ },
+};
+
+builtin_platform_driver(bcm6358_pinctrl_driver);
--
2.20.1
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v5 07/15] pinctrl: add a pincontrol driver for BCM6358
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
0 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add a pincotrol driver for BCM6358. BCM6358 allow overlaying different
functions onto the GPIO pins. It does not support configuring individual
pins but only whole groups. These groups may overlap, and still require
the directions to be set correctly in the GPIO register. In addition the
functions register controls other, not directly mux related functions.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: add changes suggested by Andy Shevchenko
v4: no changes
v3: use new shared code
v2: switch to GPIO_REGMAP
drivers/pinctrl/bcm/Kconfig | 8 +
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-bcm6358.c | 369 ++++++++++++++++++++++++++
3 files changed, 378 insertions(+)
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6358.c
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index d35e5d3fe26f..ced7cc6ab44f 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -44,6 +44,14 @@ config PINCTRL_BCM6328
help
Say Y here to enable the Broadcom BCM6328 GPIO driver.
+config PINCTRL_BCM6358
+ bool "Broadcom BCM6358 GPIO driver"
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
+ select PINCTRL_BCM63XX
+ default BMIPS_GENERIC
+ help
+ Say Y here to enable the Broadcom BCM6358 GPIO driver.
+
config PINCTRL_IPROC_GPIO
bool "Broadcom iProc GPIO (with PINCONF) driver"
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index 57e5434a6db6..c3f5b7b2f2f0 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
+obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o
obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm6358.c b/drivers/pinctrl/bcm/pinctrl-bcm6358.c
new file mode 100644
index 000000000000..d638578727f3
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6358.c
@@ -0,0 +1,369 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for BCM6358 GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "../pinctrl-utils.h"
+
+#include "pinctrl-bcm63xx.h"
+
+#define BCM6358_NUM_GPIOS 40
+
+#define BCM6358_MODE_REG 0x18
+#define BCM6358_MODE_MUX_NONE 0
+#define BCM6358_MODE_MUX_EBI_CS BIT(5)
+#define BCM6358_MODE_MUX_UART1 BIT(6)
+#define BCM6358_MODE_MUX_SPI_CS BIT(7)
+#define BCM6358_MODE_MUX_ASYNC_MODEM BIT(8)
+#define BCM6358_MODE_MUX_LEGACY_LED BIT(9)
+#define BCM6358_MODE_MUX_SERIAL_LED BIT(10)
+#define BCM6358_MODE_MUX_LED BIT(11)
+#define BCM6358_MODE_MUX_UTOPIA BIT(12)
+#define BCM6358_MODE_MUX_CLKRST BIT(13)
+#define BCM6358_MODE_MUX_PWM_SYN_CLK BIT(14)
+#define BCM6358_MODE_MUX_SYS_IRQ BIT(15)
+
+struct bcm6358_pingroup {
+ const char *name;
+ const unsigned * const pins;
+ const unsigned num_pins;
+
+ const uint16_t mode_val;
+
+ /* non-GPIO function muxes require the gpio direction to be set */
+ const uint16_t direction;
+};
+
+struct bcm6358_function {
+ const char *name;
+ const char * const *groups;
+ const unsigned num_groups;
+};
+
+struct bcm6358_priv {
+ struct regmap_field *overlays;
+};
+
+#define BCM6358_GPIO_PIN(a, b, bit1, bit2, bit3) \
+ { \
+ .number = a, \
+ .name = b, \
+ .drv_data = (void *)(BCM6358_MODE_MUX_##bit1 | \
+ BCM6358_MODE_MUX_##bit2 | \
+ BCM6358_MODE_MUX_##bit3), \
+ }
+
+static const struct pinctrl_pin_desc bcm6358_pins[] = {
+ BCM6358_GPIO_PIN(0, "gpio0", LED, NONE, NONE),
+ BCM6358_GPIO_PIN(1, "gpio1", LED, NONE, NONE),
+ BCM6358_GPIO_PIN(2, "gpio2", LED, NONE, NONE),
+ BCM6358_GPIO_PIN(3, "gpio3", LED, NONE, NONE),
+ PINCTRL_PIN(4, "gpio4"),
+ BCM6358_GPIO_PIN(5, "gpio5", SYS_IRQ, NONE, NONE),
+ BCM6358_GPIO_PIN(6, "gpio6", SERIAL_LED, NONE, NONE),
+ BCM6358_GPIO_PIN(7, "gpio7", SERIAL_LED, NONE, NONE),
+ BCM6358_GPIO_PIN(8, "gpio8", PWM_SYN_CLK, NONE, NONE),
+ BCM6358_GPIO_PIN(9, "gpio09", LEGACY_LED, NONE, NONE),
+ BCM6358_GPIO_PIN(10, "gpio10", LEGACY_LED, NONE, NONE),
+ BCM6358_GPIO_PIN(11, "gpio11", LEGACY_LED, NONE, NONE),
+ BCM6358_GPIO_PIN(12, "gpio12", LEGACY_LED, ASYNC_MODEM, UTOPIA),
+ BCM6358_GPIO_PIN(13, "gpio13", LEGACY_LED, ASYNC_MODEM, UTOPIA),
+ BCM6358_GPIO_PIN(14, "gpio14", LEGACY_LED, ASYNC_MODEM, UTOPIA),
+ BCM6358_GPIO_PIN(15, "gpio15", LEGACY_LED, ASYNC_MODEM, UTOPIA),
+ PINCTRL_PIN(16, "gpio16"),
+ PINCTRL_PIN(17, "gpio17"),
+ PINCTRL_PIN(18, "gpio18"),
+ PINCTRL_PIN(19, "gpio19"),
+ PINCTRL_PIN(20, "gpio20"),
+ PINCTRL_PIN(21, "gpio21"),
+ BCM6358_GPIO_PIN(22, "gpio22", UTOPIA, NONE, NONE),
+ BCM6358_GPIO_PIN(23, "gpio23", UTOPIA, NONE, NONE),
+ BCM6358_GPIO_PIN(24, "gpio24", UTOPIA, NONE, NONE),
+ BCM6358_GPIO_PIN(25, "gpio25", UTOPIA, NONE, NONE),
+ BCM6358_GPIO_PIN(26, "gpio26", UTOPIA, NONE, NONE),
+ BCM6358_GPIO_PIN(27, "gpio27", UTOPIA, NONE, NONE),
+ BCM6358_GPIO_PIN(28, "gpio28", UTOPIA, UART1, NONE),
+ BCM6358_GPIO_PIN(29, "gpio29", UTOPIA, UART1, NONE),
+ BCM6358_GPIO_PIN(30, "gpio30", UTOPIA, UART1, EBI_CS),
+ BCM6358_GPIO_PIN(31, "gpio31", UTOPIA, UART1, EBI_CS),
+ BCM6358_GPIO_PIN(32, "gpio32", SPI_CS, NONE, NONE),
+ BCM6358_GPIO_PIN(33, "gpio33", SPI_CS, NONE, NONE),
+ PINCTRL_PIN(34, "gpio34"),
+ PINCTRL_PIN(35, "gpio35"),
+ PINCTRL_PIN(36, "gpio36"),
+ PINCTRL_PIN(37, "gpio37"),
+ PINCTRL_PIN(38, "gpio38"),
+ PINCTRL_PIN(39, "gpio39"),
+};
+
+static unsigned ebi_cs_grp_pins[] = { 30, 31 };
+
+static unsigned uart1_grp_pins[] = { 28, 29, 30, 31 };
+
+static unsigned spi_cs_grp_pins[] = { 32, 33 };
+
+static unsigned async_modem_grp_pins[] = { 12, 13, 14, 15 };
+
+static unsigned serial_led_grp_pins[] = { 6, 7 };
+
+static unsigned legacy_led_grp_pins[] = { 9, 10, 11, 12, 13, 14, 15 };
+
+static unsigned led_grp_pins[] = { 0, 1, 2, 3 };
+
+static unsigned utopia_grp_pins[] = {
+ 12, 13, 14, 15, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+};
+
+static unsigned pwm_syn_clk_grp_pins[] = { 8 };
+
+static unsigned sys_irq_grp_pins[] = { 5 };
+
+#define BCM6358_GPIO_MUX_GROUP(n, bit, dir) \
+ { \
+ .name = #n, \
+ .pins = n##_pins, \
+ .num_pins = ARRAY_SIZE(n##_pins), \
+ .mode_val = BCM6358_MODE_MUX_##bit, \
+ .direction = dir, \
+ }
+
+static const struct bcm6358_pingroup bcm6358_groups[] = {
+ BCM6358_GPIO_MUX_GROUP(ebi_cs_grp, EBI_CS, 0x3),
+ BCM6358_GPIO_MUX_GROUP(uart1_grp, UART1, 0x2),
+ BCM6358_GPIO_MUX_GROUP(spi_cs_grp, SPI_CS, 0x6),
+ BCM6358_GPIO_MUX_GROUP(async_modem_grp, ASYNC_MODEM, 0x6),
+ BCM6358_GPIO_MUX_GROUP(legacy_led_grp, LEGACY_LED, 0x7f),
+ BCM6358_GPIO_MUX_GROUP(serial_led_grp, SERIAL_LED, 0x3),
+ BCM6358_GPIO_MUX_GROUP(led_grp, LED, 0xf),
+ BCM6358_GPIO_MUX_GROUP(utopia_grp, UTOPIA, 0x000f),
+ BCM6358_GPIO_MUX_GROUP(pwm_syn_clk_grp, PWM_SYN_CLK, 0x1),
+ BCM6358_GPIO_MUX_GROUP(sys_irq_grp, SYS_IRQ, 0x1),
+};
+
+static const char * const ebi_cs_groups[] = {
+ "ebi_cs_grp"
+};
+
+static const char * const uart1_groups[] = {
+ "uart1_grp"
+};
+
+static const char * const spi_cs_2_3_groups[] = {
+ "spi_cs_2_3_grp"
+};
+
+static const char * const async_modem_groups[] = {
+ "async_modem_grp"
+};
+
+static const char * const legacy_led_groups[] = {
+ "legacy_led_grp",
+};
+
+static const char * const serial_led_groups[] = {
+ "serial_led_grp",
+};
+
+static const char * const led_groups[] = {
+ "led_grp",
+};
+
+static const char * const clkrst_groups[] = {
+ "clkrst_grp",
+};
+
+static const char * const pwm_syn_clk_groups[] = {
+ "pwm_syn_clk_grp",
+};
+
+static const char * const sys_irq_groups[] = {
+ "sys_irq_grp",
+};
+
+#define BCM6358_FUN(n) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ }
+
+static const struct bcm6358_function bcm6358_funcs[] = {
+ BCM6358_FUN(ebi_cs),
+ BCM6358_FUN(uart1),
+ BCM6358_FUN(spi_cs_2_3),
+ BCM6358_FUN(async_modem),
+ BCM6358_FUN(legacy_led),
+ BCM6358_FUN(serial_led),
+ BCM6358_FUN(led),
+ BCM6358_FUN(clkrst),
+ BCM6358_FUN(pwm_syn_clk),
+ BCM6358_FUN(sys_irq),
+};
+
+static int bcm6358_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6358_groups);
+}
+
+static const char *bcm6358_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned group)
+{
+ return bcm6358_groups[group].name;
+}
+
+static int bcm6358_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned group, const unsigned **pins,
+ unsigned *num_pins)
+{
+ *pins = bcm6358_groups[group].pins;
+ *num_pins = bcm6358_groups[group].num_pins;
+
+ return 0;
+}
+
+static int bcm6358_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6358_funcs);
+}
+
+static const char *bcm6358_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return bcm6358_funcs[selector].name;
+}
+
+static int bcm6358_pinctrl_get_groups(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ *groups = bcm6358_funcs[selector].groups;
+ *num_groups = bcm6358_funcs[selector].num_groups;
+
+ return 0;
+}
+
+static int bcm6358_pinctrl_set_mux(struct pinctrl_dev *pctldev,
+ unsigned selector, unsigned group)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ struct bcm6358_priv *priv = pc->driver_data;
+ const struct bcm6358_pingroup *pg = &bcm6358_groups[group];
+ unsigned int val = pg->mode_val;
+ unsigned int mask = val;
+ unsigned pin;
+
+ for (pin = 0; pin < pg->num_pins; pin++)
+ mask |= (unsigned long)bcm6358_pins[pin].drv_data;
+
+ regmap_field_update_bits(priv->overlays, mask, val);
+
+ for (pin = 0; pin < pg->num_pins; pin++) {
+ struct pinctrl_gpio_range *range;
+ unsigned int hw_gpio = bcm6358_pins[pin].number;
+
+ range = pinctrl_find_gpio_range_from_pin(pctldev, hw_gpio);
+ if (range) {
+ struct gpio_chip *gc = range->gc;
+
+ if (pg->direction & BIT(pin))
+ gc->direction_output(gc, hw_gpio, 0);
+ else
+ gc->direction_input(gc, hw_gpio);
+ }
+ }
+
+ return 0;
+}
+
+static int bcm6358_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ struct bcm6358_priv *priv = pc->driver_data;
+ unsigned int mask;
+
+ mask = (unsigned long) bcm6358_pins[offset].drv_data;
+ if (!mask)
+ return 0;
+
+ /* disable all functions using this pin */
+ return regmap_field_update_bits(priv->overlays, mask, 0);
+}
+
+static struct pinctrl_ops bcm6358_pctl_ops = {
+ .dt_free_map = pinctrl_utils_free_map,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .get_group_name = bcm6358_pinctrl_get_group_name,
+ .get_group_pins = bcm6358_pinctrl_get_group_pins,
+ .get_groups_count = bcm6358_pinctrl_get_group_count,
+};
+
+static struct pinmux_ops bcm6358_pmx_ops = {
+ .get_function_groups = bcm6358_pinctrl_get_groups,
+ .get_function_name = bcm6358_pinctrl_get_func_name,
+ .get_functions_count = bcm6358_pinctrl_get_func_count,
+ .gpio_request_enable = bcm6358_gpio_request_enable,
+ .set_mux = bcm6358_pinctrl_set_mux,
+ .strict = true,
+};
+
+static const struct bcm63xx_pinctrl_soc bcm6358_soc = {
+ .ngpios = BCM6358_NUM_GPIOS,
+ .npins = ARRAY_SIZE(bcm6358_pins),
+ .pctl_ops = &bcm6358_pctl_ops,
+ .pins = bcm6358_pins,
+ .pmx_ops = &bcm6358_pmx_ops,
+};
+
+static int bcm6358_pinctrl_probe(struct platform_device *pdev)
+{
+ struct reg_field overlays = REG_FIELD(BCM6358_MODE_REG, 0, 15);
+ struct device *dev = &pdev->dev;
+ struct bcm63xx_pinctrl *pc;
+ struct bcm6358_priv *priv;
+ int err;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ err = bcm63xx_pinctrl_probe(pdev, &bcm6358_soc, (void *) priv);
+ if (err)
+ return err;
+
+ pc = platform_get_drvdata(pdev);
+
+ priv->overlays = devm_regmap_field_alloc(dev, pc->regs, overlays);
+ if (IS_ERR(priv->overlays))
+ return PTR_ERR(priv->overlays);
+
+ return 0;
+}
+
+static const struct of_device_id bcm6358_pinctrl_match[] = {
+ { .compatible = "brcm,bcm6358-pinctrl", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver bcm6358_pinctrl_driver = {
+ .probe = bcm6358_pinctrl_probe,
+ .driver = {
+ .name = "bcm6358-pinctrl",
+ .of_match_table = bcm6358_pinctrl_match,
+ },
+};
+
+builtin_platform_driver(bcm6358_pinctrl_driver);
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v5 08/15] dt-bindings: add BCM6362 pincontroller binding documentation
2021-03-06 15:56 ` Álvaro Fernández Rojas
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
-1 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add binding documentation for the pincontrol core found in BCM6362 SoCs.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: change Documentation to dt-bindings in commit title
v4: no changes
v3: add new gpio node
v2: remove interrupts
.../pinctrl/brcm,bcm6362-pinctrl.yaml | 250 ++++++++++++++++++
1 file changed, 250 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
new file mode 100644
index 000000000000..f33b56cd883f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
@@ -0,0 +1,250 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6362-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6362 pin controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |+
+ The pin controller node should be the child of a syscon node.
+
+ Refer to the the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+ compatible:
+ const: brcm,bcm6362-pinctrl
+
+patternProperties:
+ '^gpio$':
+ type: object
+ properties:
+ compatible:
+ const: brcm,bcm6362-gpio
+
+ data:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the data register (in bytes).
+
+ dirout:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the dirout register (in bytes).
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ required:
+ - gpio-controller
+ - gpio-ranges
+ - '#gpio-cells'
+
+ '^.*$':
+ if:
+ type: object
+ then:
+ properties:
+ function:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ usb_device_led, sys_irq, serial_led_clk, serial_led_data,
+ robosw_led_data, robosw_led_clk, robosw_led0, robosw_led1,
+ inet_led, spi_cs2, spi_cs3, ntr_pulse, uart1_scts,
+ uart1_srts, uart1_sdin, uart1_sdout, adsl_spi_miso,
+ adsl_spi_mosi, adsl_spi_clk, adsl_spi_cs, ephy0_led,
+ ephy1_led, ephy2_led, ephy3_led, ext_irq0, ext_irq1,
+ ext_irq2, ext_irq3, nand ]
+
+ pins:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14,
+ gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21,
+ gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ]
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio_cntl@10000080 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x10000080 0x80>;
+
+ pinctrl: pinctrl {
+ compatible = "brcm,bcm6362-pinctrl";
+
+ gpio {
+ compatible = "brcm,bcm6362-gpio";
+ data = <0xc>;
+ dirout = <0x4>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 48>;
+ #gpio-cells = <2>;
+ };
+
+ pinctrl_usb_device_led: usb_device_led {
+ function = "usb_device_led";
+ pins = "gpio0";
+ };
+
+ pinctrl_sys_irq: sys_irq {
+ function = "sys_irq";
+ pins = "gpio1";
+ };
+
+ pinctrl_serial_led: serial_led {
+ pinctrl_serial_led_clk: serial_led_clk {
+ function = "serial_led_clk";
+ pins = "gpio2";
+ };
+
+ pinctrl_serial_led_data: serial_led_data {
+ function = "serial_led_data";
+ pins = "gpio3";
+ };
+ };
+
+ pinctrl_robosw_led_data: robosw_led_data {
+ function = "robosw_led_data";
+ pins = "gpio4";
+ };
+
+ pinctrl_robosw_led_clk: robosw_led_clk {
+ function = "robosw_led_clk";
+ pins = "gpio5";
+ };
+
+ pinctrl_robosw_led0: robosw_led0 {
+ function = "robosw_led0";
+ pins = "gpio6";
+ };
+
+ pinctrl_robosw_led1: robosw_led1 {
+ function = "robosw_led1";
+ pins = "gpio7";
+ };
+
+ pinctrl_inet_led: inet_led {
+ function = "inet_led";
+ pins = "gpio8";
+ };
+
+ pinctrl_spi_cs2: spi_cs2 {
+ function = "spi_cs2";
+ pins = "gpio9";
+ };
+
+ pinctrl_spi_cs3: spi_cs3 {
+ function = "spi_cs3";
+ pins = "gpio10";
+ };
+
+ pinctrl_ntr_pulse: ntr_pulse {
+ function = "ntr_pulse";
+ pins = "gpio11";
+ };
+
+ pinctrl_uart1_scts: uart1_scts {
+ function = "uart1_scts";
+ pins = "gpio12";
+ };
+
+ pinctrl_uart1_srts: uart1_srts {
+ function = "uart1_srts";
+ pins = "gpio13";
+ };
+
+ pinctrl_uart1: uart1 {
+ pinctrl_uart1_sdin: uart1_sdin {
+ function = "uart1_sdin";
+ pins = "gpio14";
+ };
+
+ pinctrl_uart1_sdout: uart1_sdout {
+ function = "uart1_sdout";
+ pins = "gpio15";
+ };
+ };
+
+ pinctrl_adsl_spi: adsl_spi {
+ pinctrl_adsl_spi_miso: adsl_spi_miso {
+ function = "adsl_spi_miso";
+ pins = "gpio16";
+ };
+
+ pinctrl_adsl_spi_mosi: adsl_spi_mosi {
+ function = "adsl_spi_mosi";
+ pins = "gpio17";
+ };
+
+ pinctrl_adsl_spi_clk: adsl_spi_clk {
+ function = "adsl_spi_clk";
+ pins = "gpio18";
+ };
+
+ pinctrl_adsl_spi_cs: adsl_spi_cs {
+ function = "adsl_spi_cs";
+ pins = "gpio19";
+ };
+ };
+
+ pinctrl_ephy0_led: ephy0_led {
+ function = "ephy0_led";
+ pins = "gpio20";
+ };
+
+ pinctrl_ephy1_led: ephy1_led {
+ function = "ephy1_led";
+ pins = "gpio21";
+ };
+
+ pinctrl_ephy2_led: ephy2_led {
+ function = "ephy2_led";
+ pins = "gpio22";
+ };
+
+ pinctrl_ephy3_led: ephy3_led {
+ function = "ephy3_led";
+ pins = "gpio23";
+ };
+
+ pinctrl_ext_irq0: ext_irq0 {
+ function = "ext_irq0";
+ pins = "gpio24";
+ };
+
+ pinctrl_ext_irq1: ext_irq1 {
+ function = "ext_irq1";
+ pins = "gpio25";
+ };
+
+ pinctrl_ext_irq2: ext_irq2 {
+ function = "ext_irq2";
+ pins = "gpio26";
+ };
+
+ pinctrl_ext_irq3: ext_irq3 {
+ function = "ext_irq3";
+ pins = "gpio27";
+ };
+
+ pinctrl_nand: nand {
+ function = "nand";
+ group = "nand_grp";
+ };
+ };
+ };
--
2.20.1
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v5 08/15] dt-bindings: add BCM6362 pincontroller binding documentation
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
0 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add binding documentation for the pincontrol core found in BCM6362 SoCs.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: change Documentation to dt-bindings in commit title
v4: no changes
v3: add new gpio node
v2: remove interrupts
.../pinctrl/brcm,bcm6362-pinctrl.yaml | 250 ++++++++++++++++++
1 file changed, 250 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
new file mode 100644
index 000000000000..f33b56cd883f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
@@ -0,0 +1,250 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6362-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6362 pin controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |+
+ The pin controller node should be the child of a syscon node.
+
+ Refer to the the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+ compatible:
+ const: brcm,bcm6362-pinctrl
+
+patternProperties:
+ '^gpio$':
+ type: object
+ properties:
+ compatible:
+ const: brcm,bcm6362-gpio
+
+ data:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the data register (in bytes).
+
+ dirout:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the dirout register (in bytes).
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ required:
+ - gpio-controller
+ - gpio-ranges
+ - '#gpio-cells'
+
+ '^.*$':
+ if:
+ type: object
+ then:
+ properties:
+ function:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ usb_device_led, sys_irq, serial_led_clk, serial_led_data,
+ robosw_led_data, robosw_led_clk, robosw_led0, robosw_led1,
+ inet_led, spi_cs2, spi_cs3, ntr_pulse, uart1_scts,
+ uart1_srts, uart1_sdin, uart1_sdout, adsl_spi_miso,
+ adsl_spi_mosi, adsl_spi_clk, adsl_spi_cs, ephy0_led,
+ ephy1_led, ephy2_led, ephy3_led, ext_irq0, ext_irq1,
+ ext_irq2, ext_irq3, nand ]
+
+ pins:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14,
+ gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21,
+ gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ]
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio_cntl@10000080 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x10000080 0x80>;
+
+ pinctrl: pinctrl {
+ compatible = "brcm,bcm6362-pinctrl";
+
+ gpio {
+ compatible = "brcm,bcm6362-gpio";
+ data = <0xc>;
+ dirout = <0x4>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 48>;
+ #gpio-cells = <2>;
+ };
+
+ pinctrl_usb_device_led: usb_device_led {
+ function = "usb_device_led";
+ pins = "gpio0";
+ };
+
+ pinctrl_sys_irq: sys_irq {
+ function = "sys_irq";
+ pins = "gpio1";
+ };
+
+ pinctrl_serial_led: serial_led {
+ pinctrl_serial_led_clk: serial_led_clk {
+ function = "serial_led_clk";
+ pins = "gpio2";
+ };
+
+ pinctrl_serial_led_data: serial_led_data {
+ function = "serial_led_data";
+ pins = "gpio3";
+ };
+ };
+
+ pinctrl_robosw_led_data: robosw_led_data {
+ function = "robosw_led_data";
+ pins = "gpio4";
+ };
+
+ pinctrl_robosw_led_clk: robosw_led_clk {
+ function = "robosw_led_clk";
+ pins = "gpio5";
+ };
+
+ pinctrl_robosw_led0: robosw_led0 {
+ function = "robosw_led0";
+ pins = "gpio6";
+ };
+
+ pinctrl_robosw_led1: robosw_led1 {
+ function = "robosw_led1";
+ pins = "gpio7";
+ };
+
+ pinctrl_inet_led: inet_led {
+ function = "inet_led";
+ pins = "gpio8";
+ };
+
+ pinctrl_spi_cs2: spi_cs2 {
+ function = "spi_cs2";
+ pins = "gpio9";
+ };
+
+ pinctrl_spi_cs3: spi_cs3 {
+ function = "spi_cs3";
+ pins = "gpio10";
+ };
+
+ pinctrl_ntr_pulse: ntr_pulse {
+ function = "ntr_pulse";
+ pins = "gpio11";
+ };
+
+ pinctrl_uart1_scts: uart1_scts {
+ function = "uart1_scts";
+ pins = "gpio12";
+ };
+
+ pinctrl_uart1_srts: uart1_srts {
+ function = "uart1_srts";
+ pins = "gpio13";
+ };
+
+ pinctrl_uart1: uart1 {
+ pinctrl_uart1_sdin: uart1_sdin {
+ function = "uart1_sdin";
+ pins = "gpio14";
+ };
+
+ pinctrl_uart1_sdout: uart1_sdout {
+ function = "uart1_sdout";
+ pins = "gpio15";
+ };
+ };
+
+ pinctrl_adsl_spi: adsl_spi {
+ pinctrl_adsl_spi_miso: adsl_spi_miso {
+ function = "adsl_spi_miso";
+ pins = "gpio16";
+ };
+
+ pinctrl_adsl_spi_mosi: adsl_spi_mosi {
+ function = "adsl_spi_mosi";
+ pins = "gpio17";
+ };
+
+ pinctrl_adsl_spi_clk: adsl_spi_clk {
+ function = "adsl_spi_clk";
+ pins = "gpio18";
+ };
+
+ pinctrl_adsl_spi_cs: adsl_spi_cs {
+ function = "adsl_spi_cs";
+ pins = "gpio19";
+ };
+ };
+
+ pinctrl_ephy0_led: ephy0_led {
+ function = "ephy0_led";
+ pins = "gpio20";
+ };
+
+ pinctrl_ephy1_led: ephy1_led {
+ function = "ephy1_led";
+ pins = "gpio21";
+ };
+
+ pinctrl_ephy2_led: ephy2_led {
+ function = "ephy2_led";
+ pins = "gpio22";
+ };
+
+ pinctrl_ephy3_led: ephy3_led {
+ function = "ephy3_led";
+ pins = "gpio23";
+ };
+
+ pinctrl_ext_irq0: ext_irq0 {
+ function = "ext_irq0";
+ pins = "gpio24";
+ };
+
+ pinctrl_ext_irq1: ext_irq1 {
+ function = "ext_irq1";
+ pins = "gpio25";
+ };
+
+ pinctrl_ext_irq2: ext_irq2 {
+ function = "ext_irq2";
+ pins = "gpio26";
+ };
+
+ pinctrl_ext_irq3: ext_irq3 {
+ function = "ext_irq3";
+ pins = "gpio27";
+ };
+
+ pinctrl_nand: nand {
+ function = "nand";
+ group = "nand_grp";
+ };
+ };
+ };
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v5 09/15] pinctrl: add a pincontrol driver for BCM6362
2021-03-06 15:56 ` Álvaro Fernández Rojas
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
-1 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add a pincotrol driver for BCM6362. BCM6362 allows muxing individual
GPIO pins to the LED controller, to be available by the integrated
wifi, or other functions. It also supports overlay groups, of which
only NAND is documented.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: add changes suggested by Andy Shevchenko
v4: no changes
v3: use new shared code
v2: switch to GPIO_REGMAP
drivers/pinctrl/bcm/Kconfig | 8 +
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-bcm6362.c | 617 ++++++++++++++++++++++++++
3 files changed, 626 insertions(+)
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6362.c
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index ced7cc6ab44f..d3101d5e750f 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -52,6 +52,14 @@ config PINCTRL_BCM6358
help
Say Y here to enable the Broadcom BCM6358 GPIO driver.
+config PINCTRL_BCM6362
+ bool "Broadcom BCM6362 GPIO driver"
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
+ select PINCTRL_BCM63XX
+ default BMIPS_GENERIC
+ help
+ Say Y here to enable the Broadcom BCM6362 GPIO driver.
+
config PINCTRL_IPROC_GPIO
bool "Broadcom iProc GPIO (with PINCONF) driver"
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index c3f5b7b2f2f0..b9b09e5b914c 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
+obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o
obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm6362.c b/drivers/pinctrl/bcm/pinctrl-bcm6362.c
new file mode 100644
index 000000000000..eb7ec80353e9
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6362.c
@@ -0,0 +1,617 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for BCM6362 GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "../pinctrl-utils.h"
+
+#include "pinctrl-bcm63xx.h"
+
+#define BCM6362_BANK_GPIOS 32
+#define BCM6362_NUM_GPIOS 48
+#define BCM6362_NUM_LEDS 24
+
+#define BCM6362_LED_REG 0x10
+#define BCM6362_MODE_REG 0x18
+#define BCM6362_CTRL_REG 0x1c
+#define BCM6362_BASEMODE_REG 0x38
+#define BASEMODE_NAND BIT(2)
+
+enum bcm6362_pinctrl_reg {
+ BCM6362_LEDCTRL,
+ BCM6362_MODE,
+ BCM6362_CTRL,
+ BCM6362_BASEMODE,
+};
+
+struct bcm6362_pingroup {
+ const char *name;
+ const unsigned * const pins;
+ const unsigned num_pins;
+};
+
+struct bcm6362_function {
+ const char *name;
+ const char * const *groups;
+ const unsigned num_groups;
+
+ enum bcm6362_pinctrl_reg reg;
+ uint32_t basemode_mask;
+};
+
+#define BCM6362_PIN(a, b, mask) \
+ { \
+ .number = a, \
+ .name = b, \
+ .drv_data = (void *)(mask), \
+ }
+
+static const struct pinctrl_pin_desc bcm6362_pins[] = {
+ PINCTRL_PIN(0, "gpio0"),
+ PINCTRL_PIN(1, "gpio1"),
+ PINCTRL_PIN(2, "gpio2"),
+ PINCTRL_PIN(3, "gpio3"),
+ PINCTRL_PIN(4, "gpio4"),
+ PINCTRL_PIN(5, "gpio5"),
+ PINCTRL_PIN(6, "gpio6"),
+ PINCTRL_PIN(7, "gpio7"),
+ BCM6362_PIN(8, "gpio8", BASEMODE_NAND),
+ PINCTRL_PIN(9, "gpio9"),
+ PINCTRL_PIN(10, "gpio10"),
+ PINCTRL_PIN(11, "gpio11"),
+ BCM6362_PIN(12, "gpio12", BASEMODE_NAND),
+ BCM6362_PIN(13, "gpio13", BASEMODE_NAND),
+ BCM6362_PIN(14, "gpio14", BASEMODE_NAND),
+ BCM6362_PIN(15, "gpio15", BASEMODE_NAND),
+ BCM6362_PIN(16, "gpio16", BASEMODE_NAND),
+ BCM6362_PIN(17, "gpio17", BASEMODE_NAND),
+ BCM6362_PIN(18, "gpio18", BASEMODE_NAND),
+ BCM6362_PIN(19, "gpio19", BASEMODE_NAND),
+ BCM6362_PIN(20, "gpio20", BASEMODE_NAND),
+ BCM6362_PIN(21, "gpio21", BASEMODE_NAND),
+ BCM6362_PIN(22, "gpio22", BASEMODE_NAND),
+ BCM6362_PIN(23, "gpio23", BASEMODE_NAND),
+ PINCTRL_PIN(24, "gpio24"),
+ PINCTRL_PIN(25, "gpio25"),
+ PINCTRL_PIN(26, "gpio26"),
+ BCM6362_PIN(27, "gpio27", BASEMODE_NAND),
+ PINCTRL_PIN(28, "gpio28"),
+ PINCTRL_PIN(29, "gpio29"),
+ PINCTRL_PIN(30, "gpio30"),
+ PINCTRL_PIN(31, "gpio31"),
+ PINCTRL_PIN(32, "gpio32"),
+ PINCTRL_PIN(33, "gpio33"),
+ PINCTRL_PIN(34, "gpio34"),
+ PINCTRL_PIN(35, "gpio35"),
+ PINCTRL_PIN(36, "gpio36"),
+ PINCTRL_PIN(37, "gpio37"),
+ PINCTRL_PIN(38, "gpio38"),
+ PINCTRL_PIN(39, "gpio39"),
+ PINCTRL_PIN(40, "gpio40"),
+ PINCTRL_PIN(41, "gpio41"),
+ PINCTRL_PIN(42, "gpio42"),
+ PINCTRL_PIN(43, "gpio43"),
+ PINCTRL_PIN(44, "gpio44"),
+ PINCTRL_PIN(45, "gpio45"),
+ PINCTRL_PIN(46, "gpio46"),
+ PINCTRL_PIN(47, "gpio47"),
+};
+
+static unsigned gpio0_pins[] = { 0 };
+static unsigned gpio1_pins[] = { 1 };
+static unsigned gpio2_pins[] = { 2 };
+static unsigned gpio3_pins[] = { 3 };
+static unsigned gpio4_pins[] = { 4 };
+static unsigned gpio5_pins[] = { 5 };
+static unsigned gpio6_pins[] = { 6 };
+static unsigned gpio7_pins[] = { 7 };
+static unsigned gpio8_pins[] = { 8 };
+static unsigned gpio9_pins[] = { 9 };
+static unsigned gpio10_pins[] = { 10 };
+static unsigned gpio11_pins[] = { 11 };
+static unsigned gpio12_pins[] = { 12 };
+static unsigned gpio13_pins[] = { 13 };
+static unsigned gpio14_pins[] = { 14 };
+static unsigned gpio15_pins[] = { 15 };
+static unsigned gpio16_pins[] = { 16 };
+static unsigned gpio17_pins[] = { 17 };
+static unsigned gpio18_pins[] = { 18 };
+static unsigned gpio19_pins[] = { 19 };
+static unsigned gpio20_pins[] = { 20 };
+static unsigned gpio21_pins[] = { 21 };
+static unsigned gpio22_pins[] = { 22 };
+static unsigned gpio23_pins[] = { 23 };
+static unsigned gpio24_pins[] = { 24 };
+static unsigned gpio25_pins[] = { 25 };
+static unsigned gpio26_pins[] = { 26 };
+static unsigned gpio27_pins[] = { 27 };
+static unsigned gpio28_pins[] = { 28 };
+static unsigned gpio29_pins[] = { 29 };
+static unsigned gpio30_pins[] = { 30 };
+static unsigned gpio31_pins[] = { 31 };
+static unsigned gpio32_pins[] = { 32 };
+static unsigned gpio33_pins[] = { 33 };
+static unsigned gpio34_pins[] = { 34 };
+static unsigned gpio35_pins[] = { 35 };
+static unsigned gpio36_pins[] = { 36 };
+static unsigned gpio37_pins[] = { 37 };
+static unsigned gpio38_pins[] = { 38 };
+static unsigned gpio39_pins[] = { 39 };
+static unsigned gpio40_pins[] = { 40 };
+static unsigned gpio41_pins[] = { 41 };
+static unsigned gpio42_pins[] = { 42 };
+static unsigned gpio43_pins[] = { 43 };
+static unsigned gpio44_pins[] = { 44 };
+static unsigned gpio45_pins[] = { 45 };
+static unsigned gpio46_pins[] = { 46 };
+static unsigned gpio47_pins[] = { 47 };
+
+static unsigned nand_grp_pins[] = {
+ 8, 12, 13, 14, 15, 16, 17,
+ 18, 19, 20, 21, 22, 23, 27,
+};
+
+#define BCM6362_GROUP(n) \
+ { \
+ .name = #n, \
+ .pins = n##_pins, \
+ .num_pins = ARRAY_SIZE(n##_pins), \
+ }
+
+static struct bcm6362_pingroup bcm6362_groups[] = {
+ BCM6362_GROUP(gpio0),
+ BCM6362_GROUP(gpio1),
+ BCM6362_GROUP(gpio2),
+ BCM6362_GROUP(gpio3),
+ BCM6362_GROUP(gpio4),
+ BCM6362_GROUP(gpio5),
+ BCM6362_GROUP(gpio6),
+ BCM6362_GROUP(gpio7),
+ BCM6362_GROUP(gpio8),
+ BCM6362_GROUP(gpio9),
+ BCM6362_GROUP(gpio10),
+ BCM6362_GROUP(gpio11),
+ BCM6362_GROUP(gpio12),
+ BCM6362_GROUP(gpio13),
+ BCM6362_GROUP(gpio14),
+ BCM6362_GROUP(gpio15),
+ BCM6362_GROUP(gpio16),
+ BCM6362_GROUP(gpio17),
+ BCM6362_GROUP(gpio18),
+ BCM6362_GROUP(gpio19),
+ BCM6362_GROUP(gpio20),
+ BCM6362_GROUP(gpio21),
+ BCM6362_GROUP(gpio22),
+ BCM6362_GROUP(gpio23),
+ BCM6362_GROUP(gpio24),
+ BCM6362_GROUP(gpio25),
+ BCM6362_GROUP(gpio26),
+ BCM6362_GROUP(gpio27),
+ BCM6362_GROUP(gpio28),
+ BCM6362_GROUP(gpio29),
+ BCM6362_GROUP(gpio30),
+ BCM6362_GROUP(gpio31),
+ BCM6362_GROUP(gpio32),
+ BCM6362_GROUP(gpio33),
+ BCM6362_GROUP(gpio34),
+ BCM6362_GROUP(gpio35),
+ BCM6362_GROUP(gpio36),
+ BCM6362_GROUP(gpio37),
+ BCM6362_GROUP(gpio38),
+ BCM6362_GROUP(gpio39),
+ BCM6362_GROUP(gpio40),
+ BCM6362_GROUP(gpio41),
+ BCM6362_GROUP(gpio42),
+ BCM6362_GROUP(gpio43),
+ BCM6362_GROUP(gpio44),
+ BCM6362_GROUP(gpio45),
+ BCM6362_GROUP(gpio46),
+ BCM6362_GROUP(gpio47),
+ BCM6362_GROUP(nand_grp),
+};
+
+static const char * const led_groups[] = {
+ "gpio0",
+ "gpio1",
+ "gpio2",
+ "gpio3",
+ "gpio4",
+ "gpio5",
+ "gpio6",
+ "gpio7",
+ "gpio8",
+ "gpio9",
+ "gpio10",
+ "gpio11",
+ "gpio12",
+ "gpio13",
+ "gpio14",
+ "gpio15",
+ "gpio16",
+ "gpio17",
+ "gpio18",
+ "gpio19",
+ "gpio20",
+ "gpio21",
+ "gpio22",
+ "gpio23",
+};
+
+static const char * const usb_device_led_groups[] = {
+ "gpio0",
+};
+
+static const char * const sys_irq_groups[] = {
+ "gpio1",
+};
+
+static const char * const serial_led_clk_groups[] = {
+ "gpio2",
+};
+
+static const char * const serial_led_data_groups[] = {
+ "gpio3",
+};
+
+static const char * const robosw_led_data_groups[] = {
+ "gpio4",
+};
+
+static const char * const robosw_led_clk_groups[] = {
+ "gpio5",
+};
+
+static const char * const robosw_led0_groups[] = {
+ "gpio6",
+};
+
+static const char * const robosw_led1_groups[] = {
+ "gpio7",
+};
+
+static const char * const inet_led_groups[] = {
+ "gpio8",
+};
+
+static const char * const spi_cs2_groups[] = {
+ "gpio9",
+};
+
+static const char * const spi_cs3_groups[] = {
+ "gpio10",
+};
+
+static const char * const ntr_pulse_groups[] = {
+ "gpio11",
+};
+
+static const char * const uart1_scts_groups[] = {
+ "gpio12",
+};
+
+static const char * const uart1_srts_groups[] = {
+ "gpio13",
+};
+
+static const char * const uart1_sdin_groups[] = {
+ "gpio14",
+};
+
+static const char * const uart1_sdout_groups[] = {
+ "gpio15",
+};
+
+static const char * const adsl_spi_miso_groups[] = {
+ "gpio16",
+};
+
+static const char * const adsl_spi_mosi_groups[] = {
+ "gpio17",
+};
+
+static const char * const adsl_spi_clk_groups[] = {
+ "gpio18",
+};
+
+static const char * const adsl_spi_cs_groups[] = {
+ "gpio19",
+};
+
+static const char * const ephy0_led_groups[] = {
+ "gpio20",
+};
+
+static const char * const ephy1_led_groups[] = {
+ "gpio21",
+};
+
+static const char * const ephy2_led_groups[] = {
+ "gpio22",
+};
+
+static const char * const ephy3_led_groups[] = {
+ "gpio23",
+};
+
+static const char * const ext_irq0_groups[] = {
+ "gpio24",
+};
+
+static const char * const ext_irq1_groups[] = {
+ "gpio25",
+};
+
+static const char * const ext_irq2_groups[] = {
+ "gpio26",
+};
+
+static const char * const ext_irq3_groups[] = {
+ "gpio27",
+};
+
+static const char * const wifi_groups[] = {
+ "gpio32",
+ "gpio33",
+ "gpio34",
+ "gpio35",
+ "gpio36",
+ "gpio37",
+ "gpio38",
+ "gpio39",
+ "gpio40",
+ "gpio41",
+ "gpio42",
+ "gpio43",
+ "gpio44",
+ "gpio45",
+ "gpio46",
+ "gpio47",
+};
+
+static const char * const nand_groups[] = {
+ "nand_grp",
+};
+
+#define BCM6362_LED_FUN(n) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .reg = BCM6362_LEDCTRL, \
+ }
+
+#define BCM6362_MODE_FUN(n) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .reg = BCM6362_MODE, \
+ }
+
+#define BCM6362_CTRL_FUN(n) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .reg = BCM6362_CTRL, \
+ }
+
+#define BCM6362_BASEMODE_FUN(n, mask) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .reg = BCM6362_BASEMODE, \
+ .basemode_mask = (mask), \
+ }
+
+static const struct bcm6362_function bcm6362_funcs[] = {
+ BCM6362_LED_FUN(led),
+ BCM6362_MODE_FUN(usb_device_led),
+ BCM6362_MODE_FUN(sys_irq),
+ BCM6362_MODE_FUN(serial_led_clk),
+ BCM6362_MODE_FUN(serial_led_data),
+ BCM6362_MODE_FUN(robosw_led_data),
+ BCM6362_MODE_FUN(robosw_led_clk),
+ BCM6362_MODE_FUN(robosw_led0),
+ BCM6362_MODE_FUN(robosw_led1),
+ BCM6362_MODE_FUN(inet_led),
+ BCM6362_MODE_FUN(spi_cs2),
+ BCM6362_MODE_FUN(spi_cs3),
+ BCM6362_MODE_FUN(ntr_pulse),
+ BCM6362_MODE_FUN(uart1_scts),
+ BCM6362_MODE_FUN(uart1_srts),
+ BCM6362_MODE_FUN(uart1_sdin),
+ BCM6362_MODE_FUN(uart1_sdout),
+ BCM6362_MODE_FUN(adsl_spi_miso),
+ BCM6362_MODE_FUN(adsl_spi_mosi),
+ BCM6362_MODE_FUN(adsl_spi_clk),
+ BCM6362_MODE_FUN(adsl_spi_cs),
+ BCM6362_MODE_FUN(ephy0_led),
+ BCM6362_MODE_FUN(ephy1_led),
+ BCM6362_MODE_FUN(ephy2_led),
+ BCM6362_MODE_FUN(ephy3_led),
+ BCM6362_MODE_FUN(ext_irq0),
+ BCM6362_MODE_FUN(ext_irq1),
+ BCM6362_MODE_FUN(ext_irq2),
+ BCM6362_MODE_FUN(ext_irq3),
+ BCM6362_CTRL_FUN(wifi),
+ BCM6362_BASEMODE_FUN(nand, BASEMODE_NAND),
+};
+
+static int bcm6362_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6362_groups);
+}
+
+static const char *bcm6362_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned group)
+{
+ return bcm6362_groups[group].name;
+}
+
+static int bcm6362_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned group, const unsigned **pins,
+ unsigned *num_pins)
+{
+ *pins = bcm6362_groups[group].pins;
+ *num_pins = bcm6362_groups[group].num_pins;
+
+ return 0;
+}
+
+static int bcm6362_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6362_funcs);
+}
+
+static const char *bcm6362_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return bcm6362_funcs[selector].name;
+}
+
+static int bcm6362_pinctrl_get_groups(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ *groups = bcm6362_funcs[selector].groups;
+ *num_groups = bcm6362_funcs[selector].num_groups;
+
+ return 0;
+}
+
+static void bcm6362_set_gpio(struct bcm63xx_pinctrl *pc, unsigned pin)
+{
+ const struct pinctrl_pin_desc *desc = &bcm6362_pins[pin];
+ unsigned int mask = bcm63xx_bank_pin(pin);
+
+ if (desc->drv_data)
+ regmap_update_bits(pc->regs, BCM6362_BASEMODE_REG,
+ (uint32_t) desc->drv_data, 0);
+
+ if (pin < BCM63XX_BANK_GPIOS) {
+ /* base mode 0 => gpio 1 => mux function */
+ regmap_update_bits(pc->regs, BCM6362_MODE_REG, mask, 0);
+
+ /* pins 0-23 might be muxed to led */
+ if (pin < BCM6362_NUM_LEDS)
+ regmap_update_bits(pc->regs, BCM6362_LED_REG, mask, 0);
+ } else {
+ /* ctrl reg 0 => wifi function 1 => gpio */
+ regmap_update_bits(pc->regs, BCM6362_CTRL_REG, mask, mask);
+ }
+}
+
+static int bcm6362_pinctrl_set_mux(struct pinctrl_dev *pctldev,
+ unsigned selector, unsigned group)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ const struct bcm6362_pingroup *pg = &bcm6362_groups[group];
+ const struct bcm6362_function *f = &bcm6362_funcs[selector];
+ unsigned i;
+ unsigned int reg;
+ unsigned int val, mask;
+
+ for (i = 0; i < pg->num_pins; i++)
+ bcm6362_set_gpio(pc, pg->pins[i]);
+
+ switch (f->reg) {
+ case BCM6362_LEDCTRL:
+ reg = BCM6362_LED_REG;
+ mask = BIT(pg->pins[0]);
+ val = BIT(pg->pins[0]);
+ break;
+ case BCM6362_MODE:
+ reg = BCM6362_MODE_REG;
+ mask = BIT(pg->pins[0]);
+ val = BIT(pg->pins[0]);
+ break;
+ case BCM6362_CTRL:
+ reg = BCM6362_CTRL_REG;
+ mask = BIT(pg->pins[0]);
+ val = 0;
+ break;
+ case BCM6362_BASEMODE:
+ reg = BCM6362_BASEMODE_REG;
+ mask = f->basemode_mask;
+ val = f->basemode_mask;
+ break;
+ default:
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ regmap_update_bits(pc->regs, reg, mask, val);
+
+ return 0;
+}
+
+static int bcm6362_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+
+ /* disable all functions using this pin */
+ bcm6362_set_gpio(pc, offset);
+
+ return 0;
+}
+
+static struct pinctrl_ops bcm6362_pctl_ops = {
+ .dt_free_map = pinctrl_utils_free_map,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .get_group_name = bcm6362_pinctrl_get_group_name,
+ .get_group_pins = bcm6362_pinctrl_get_group_pins,
+ .get_groups_count = bcm6362_pinctrl_get_group_count,
+};
+
+static struct pinmux_ops bcm6362_pmx_ops = {
+ .get_function_groups = bcm6362_pinctrl_get_groups,
+ .get_function_name = bcm6362_pinctrl_get_func_name,
+ .get_functions_count = bcm6362_pinctrl_get_func_count,
+ .gpio_request_enable = bcm6362_gpio_request_enable,
+ .set_mux = bcm6362_pinctrl_set_mux,
+ .strict = true,
+};
+
+static const struct bcm63xx_pinctrl_soc bcm6362_soc = {
+ .ngpios = BCM6362_NUM_GPIOS,
+ .npins = ARRAY_SIZE(bcm6362_pins),
+ .pctl_ops = &bcm6362_pctl_ops,
+ .pins = bcm6362_pins,
+ .pmx_ops = &bcm6362_pmx_ops,
+};
+
+static int bcm6362_pinctrl_probe(struct platform_device *pdev)
+{
+ return bcm63xx_pinctrl_probe(pdev, &bcm6362_soc, NULL);
+}
+
+static const struct of_device_id bcm6362_pinctrl_match[] = {
+ { .compatible = "brcm,bcm6362-pinctrl", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver bcm6362_pinctrl_driver = {
+ .probe = bcm6362_pinctrl_probe,
+ .driver = {
+ .name = "bcm6362-pinctrl",
+ .of_match_table = bcm6362_pinctrl_match,
+ },
+};
+
+builtin_platform_driver(bcm6362_pinctrl_driver);
--
2.20.1
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v5 09/15] pinctrl: add a pincontrol driver for BCM6362
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
0 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add a pincotrol driver for BCM6362. BCM6362 allows muxing individual
GPIO pins to the LED controller, to be available by the integrated
wifi, or other functions. It also supports overlay groups, of which
only NAND is documented.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: add changes suggested by Andy Shevchenko
v4: no changes
v3: use new shared code
v2: switch to GPIO_REGMAP
drivers/pinctrl/bcm/Kconfig | 8 +
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-bcm6362.c | 617 ++++++++++++++++++++++++++
3 files changed, 626 insertions(+)
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6362.c
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index ced7cc6ab44f..d3101d5e750f 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -52,6 +52,14 @@ config PINCTRL_BCM6358
help
Say Y here to enable the Broadcom BCM6358 GPIO driver.
+config PINCTRL_BCM6362
+ bool "Broadcom BCM6362 GPIO driver"
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
+ select PINCTRL_BCM63XX
+ default BMIPS_GENERIC
+ help
+ Say Y here to enable the Broadcom BCM6362 GPIO driver.
+
config PINCTRL_IPROC_GPIO
bool "Broadcom iProc GPIO (with PINCONF) driver"
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index c3f5b7b2f2f0..b9b09e5b914c 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
+obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o
obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm6362.c b/drivers/pinctrl/bcm/pinctrl-bcm6362.c
new file mode 100644
index 000000000000..eb7ec80353e9
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6362.c
@@ -0,0 +1,617 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for BCM6362 GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "../pinctrl-utils.h"
+
+#include "pinctrl-bcm63xx.h"
+
+#define BCM6362_BANK_GPIOS 32
+#define BCM6362_NUM_GPIOS 48
+#define BCM6362_NUM_LEDS 24
+
+#define BCM6362_LED_REG 0x10
+#define BCM6362_MODE_REG 0x18
+#define BCM6362_CTRL_REG 0x1c
+#define BCM6362_BASEMODE_REG 0x38
+#define BASEMODE_NAND BIT(2)
+
+enum bcm6362_pinctrl_reg {
+ BCM6362_LEDCTRL,
+ BCM6362_MODE,
+ BCM6362_CTRL,
+ BCM6362_BASEMODE,
+};
+
+struct bcm6362_pingroup {
+ const char *name;
+ const unsigned * const pins;
+ const unsigned num_pins;
+};
+
+struct bcm6362_function {
+ const char *name;
+ const char * const *groups;
+ const unsigned num_groups;
+
+ enum bcm6362_pinctrl_reg reg;
+ uint32_t basemode_mask;
+};
+
+#define BCM6362_PIN(a, b, mask) \
+ { \
+ .number = a, \
+ .name = b, \
+ .drv_data = (void *)(mask), \
+ }
+
+static const struct pinctrl_pin_desc bcm6362_pins[] = {
+ PINCTRL_PIN(0, "gpio0"),
+ PINCTRL_PIN(1, "gpio1"),
+ PINCTRL_PIN(2, "gpio2"),
+ PINCTRL_PIN(3, "gpio3"),
+ PINCTRL_PIN(4, "gpio4"),
+ PINCTRL_PIN(5, "gpio5"),
+ PINCTRL_PIN(6, "gpio6"),
+ PINCTRL_PIN(7, "gpio7"),
+ BCM6362_PIN(8, "gpio8", BASEMODE_NAND),
+ PINCTRL_PIN(9, "gpio9"),
+ PINCTRL_PIN(10, "gpio10"),
+ PINCTRL_PIN(11, "gpio11"),
+ BCM6362_PIN(12, "gpio12", BASEMODE_NAND),
+ BCM6362_PIN(13, "gpio13", BASEMODE_NAND),
+ BCM6362_PIN(14, "gpio14", BASEMODE_NAND),
+ BCM6362_PIN(15, "gpio15", BASEMODE_NAND),
+ BCM6362_PIN(16, "gpio16", BASEMODE_NAND),
+ BCM6362_PIN(17, "gpio17", BASEMODE_NAND),
+ BCM6362_PIN(18, "gpio18", BASEMODE_NAND),
+ BCM6362_PIN(19, "gpio19", BASEMODE_NAND),
+ BCM6362_PIN(20, "gpio20", BASEMODE_NAND),
+ BCM6362_PIN(21, "gpio21", BASEMODE_NAND),
+ BCM6362_PIN(22, "gpio22", BASEMODE_NAND),
+ BCM6362_PIN(23, "gpio23", BASEMODE_NAND),
+ PINCTRL_PIN(24, "gpio24"),
+ PINCTRL_PIN(25, "gpio25"),
+ PINCTRL_PIN(26, "gpio26"),
+ BCM6362_PIN(27, "gpio27", BASEMODE_NAND),
+ PINCTRL_PIN(28, "gpio28"),
+ PINCTRL_PIN(29, "gpio29"),
+ PINCTRL_PIN(30, "gpio30"),
+ PINCTRL_PIN(31, "gpio31"),
+ PINCTRL_PIN(32, "gpio32"),
+ PINCTRL_PIN(33, "gpio33"),
+ PINCTRL_PIN(34, "gpio34"),
+ PINCTRL_PIN(35, "gpio35"),
+ PINCTRL_PIN(36, "gpio36"),
+ PINCTRL_PIN(37, "gpio37"),
+ PINCTRL_PIN(38, "gpio38"),
+ PINCTRL_PIN(39, "gpio39"),
+ PINCTRL_PIN(40, "gpio40"),
+ PINCTRL_PIN(41, "gpio41"),
+ PINCTRL_PIN(42, "gpio42"),
+ PINCTRL_PIN(43, "gpio43"),
+ PINCTRL_PIN(44, "gpio44"),
+ PINCTRL_PIN(45, "gpio45"),
+ PINCTRL_PIN(46, "gpio46"),
+ PINCTRL_PIN(47, "gpio47"),
+};
+
+static unsigned gpio0_pins[] = { 0 };
+static unsigned gpio1_pins[] = { 1 };
+static unsigned gpio2_pins[] = { 2 };
+static unsigned gpio3_pins[] = { 3 };
+static unsigned gpio4_pins[] = { 4 };
+static unsigned gpio5_pins[] = { 5 };
+static unsigned gpio6_pins[] = { 6 };
+static unsigned gpio7_pins[] = { 7 };
+static unsigned gpio8_pins[] = { 8 };
+static unsigned gpio9_pins[] = { 9 };
+static unsigned gpio10_pins[] = { 10 };
+static unsigned gpio11_pins[] = { 11 };
+static unsigned gpio12_pins[] = { 12 };
+static unsigned gpio13_pins[] = { 13 };
+static unsigned gpio14_pins[] = { 14 };
+static unsigned gpio15_pins[] = { 15 };
+static unsigned gpio16_pins[] = { 16 };
+static unsigned gpio17_pins[] = { 17 };
+static unsigned gpio18_pins[] = { 18 };
+static unsigned gpio19_pins[] = { 19 };
+static unsigned gpio20_pins[] = { 20 };
+static unsigned gpio21_pins[] = { 21 };
+static unsigned gpio22_pins[] = { 22 };
+static unsigned gpio23_pins[] = { 23 };
+static unsigned gpio24_pins[] = { 24 };
+static unsigned gpio25_pins[] = { 25 };
+static unsigned gpio26_pins[] = { 26 };
+static unsigned gpio27_pins[] = { 27 };
+static unsigned gpio28_pins[] = { 28 };
+static unsigned gpio29_pins[] = { 29 };
+static unsigned gpio30_pins[] = { 30 };
+static unsigned gpio31_pins[] = { 31 };
+static unsigned gpio32_pins[] = { 32 };
+static unsigned gpio33_pins[] = { 33 };
+static unsigned gpio34_pins[] = { 34 };
+static unsigned gpio35_pins[] = { 35 };
+static unsigned gpio36_pins[] = { 36 };
+static unsigned gpio37_pins[] = { 37 };
+static unsigned gpio38_pins[] = { 38 };
+static unsigned gpio39_pins[] = { 39 };
+static unsigned gpio40_pins[] = { 40 };
+static unsigned gpio41_pins[] = { 41 };
+static unsigned gpio42_pins[] = { 42 };
+static unsigned gpio43_pins[] = { 43 };
+static unsigned gpio44_pins[] = { 44 };
+static unsigned gpio45_pins[] = { 45 };
+static unsigned gpio46_pins[] = { 46 };
+static unsigned gpio47_pins[] = { 47 };
+
+static unsigned nand_grp_pins[] = {
+ 8, 12, 13, 14, 15, 16, 17,
+ 18, 19, 20, 21, 22, 23, 27,
+};
+
+#define BCM6362_GROUP(n) \
+ { \
+ .name = #n, \
+ .pins = n##_pins, \
+ .num_pins = ARRAY_SIZE(n##_pins), \
+ }
+
+static struct bcm6362_pingroup bcm6362_groups[] = {
+ BCM6362_GROUP(gpio0),
+ BCM6362_GROUP(gpio1),
+ BCM6362_GROUP(gpio2),
+ BCM6362_GROUP(gpio3),
+ BCM6362_GROUP(gpio4),
+ BCM6362_GROUP(gpio5),
+ BCM6362_GROUP(gpio6),
+ BCM6362_GROUP(gpio7),
+ BCM6362_GROUP(gpio8),
+ BCM6362_GROUP(gpio9),
+ BCM6362_GROUP(gpio10),
+ BCM6362_GROUP(gpio11),
+ BCM6362_GROUP(gpio12),
+ BCM6362_GROUP(gpio13),
+ BCM6362_GROUP(gpio14),
+ BCM6362_GROUP(gpio15),
+ BCM6362_GROUP(gpio16),
+ BCM6362_GROUP(gpio17),
+ BCM6362_GROUP(gpio18),
+ BCM6362_GROUP(gpio19),
+ BCM6362_GROUP(gpio20),
+ BCM6362_GROUP(gpio21),
+ BCM6362_GROUP(gpio22),
+ BCM6362_GROUP(gpio23),
+ BCM6362_GROUP(gpio24),
+ BCM6362_GROUP(gpio25),
+ BCM6362_GROUP(gpio26),
+ BCM6362_GROUP(gpio27),
+ BCM6362_GROUP(gpio28),
+ BCM6362_GROUP(gpio29),
+ BCM6362_GROUP(gpio30),
+ BCM6362_GROUP(gpio31),
+ BCM6362_GROUP(gpio32),
+ BCM6362_GROUP(gpio33),
+ BCM6362_GROUP(gpio34),
+ BCM6362_GROUP(gpio35),
+ BCM6362_GROUP(gpio36),
+ BCM6362_GROUP(gpio37),
+ BCM6362_GROUP(gpio38),
+ BCM6362_GROUP(gpio39),
+ BCM6362_GROUP(gpio40),
+ BCM6362_GROUP(gpio41),
+ BCM6362_GROUP(gpio42),
+ BCM6362_GROUP(gpio43),
+ BCM6362_GROUP(gpio44),
+ BCM6362_GROUP(gpio45),
+ BCM6362_GROUP(gpio46),
+ BCM6362_GROUP(gpio47),
+ BCM6362_GROUP(nand_grp),
+};
+
+static const char * const led_groups[] = {
+ "gpio0",
+ "gpio1",
+ "gpio2",
+ "gpio3",
+ "gpio4",
+ "gpio5",
+ "gpio6",
+ "gpio7",
+ "gpio8",
+ "gpio9",
+ "gpio10",
+ "gpio11",
+ "gpio12",
+ "gpio13",
+ "gpio14",
+ "gpio15",
+ "gpio16",
+ "gpio17",
+ "gpio18",
+ "gpio19",
+ "gpio20",
+ "gpio21",
+ "gpio22",
+ "gpio23",
+};
+
+static const char * const usb_device_led_groups[] = {
+ "gpio0",
+};
+
+static const char * const sys_irq_groups[] = {
+ "gpio1",
+};
+
+static const char * const serial_led_clk_groups[] = {
+ "gpio2",
+};
+
+static const char * const serial_led_data_groups[] = {
+ "gpio3",
+};
+
+static const char * const robosw_led_data_groups[] = {
+ "gpio4",
+};
+
+static const char * const robosw_led_clk_groups[] = {
+ "gpio5",
+};
+
+static const char * const robosw_led0_groups[] = {
+ "gpio6",
+};
+
+static const char * const robosw_led1_groups[] = {
+ "gpio7",
+};
+
+static const char * const inet_led_groups[] = {
+ "gpio8",
+};
+
+static const char * const spi_cs2_groups[] = {
+ "gpio9",
+};
+
+static const char * const spi_cs3_groups[] = {
+ "gpio10",
+};
+
+static const char * const ntr_pulse_groups[] = {
+ "gpio11",
+};
+
+static const char * const uart1_scts_groups[] = {
+ "gpio12",
+};
+
+static const char * const uart1_srts_groups[] = {
+ "gpio13",
+};
+
+static const char * const uart1_sdin_groups[] = {
+ "gpio14",
+};
+
+static const char * const uart1_sdout_groups[] = {
+ "gpio15",
+};
+
+static const char * const adsl_spi_miso_groups[] = {
+ "gpio16",
+};
+
+static const char * const adsl_spi_mosi_groups[] = {
+ "gpio17",
+};
+
+static const char * const adsl_spi_clk_groups[] = {
+ "gpio18",
+};
+
+static const char * const adsl_spi_cs_groups[] = {
+ "gpio19",
+};
+
+static const char * const ephy0_led_groups[] = {
+ "gpio20",
+};
+
+static const char * const ephy1_led_groups[] = {
+ "gpio21",
+};
+
+static const char * const ephy2_led_groups[] = {
+ "gpio22",
+};
+
+static const char * const ephy3_led_groups[] = {
+ "gpio23",
+};
+
+static const char * const ext_irq0_groups[] = {
+ "gpio24",
+};
+
+static const char * const ext_irq1_groups[] = {
+ "gpio25",
+};
+
+static const char * const ext_irq2_groups[] = {
+ "gpio26",
+};
+
+static const char * const ext_irq3_groups[] = {
+ "gpio27",
+};
+
+static const char * const wifi_groups[] = {
+ "gpio32",
+ "gpio33",
+ "gpio34",
+ "gpio35",
+ "gpio36",
+ "gpio37",
+ "gpio38",
+ "gpio39",
+ "gpio40",
+ "gpio41",
+ "gpio42",
+ "gpio43",
+ "gpio44",
+ "gpio45",
+ "gpio46",
+ "gpio47",
+};
+
+static const char * const nand_groups[] = {
+ "nand_grp",
+};
+
+#define BCM6362_LED_FUN(n) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .reg = BCM6362_LEDCTRL, \
+ }
+
+#define BCM6362_MODE_FUN(n) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .reg = BCM6362_MODE, \
+ }
+
+#define BCM6362_CTRL_FUN(n) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .reg = BCM6362_CTRL, \
+ }
+
+#define BCM6362_BASEMODE_FUN(n, mask) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .reg = BCM6362_BASEMODE, \
+ .basemode_mask = (mask), \
+ }
+
+static const struct bcm6362_function bcm6362_funcs[] = {
+ BCM6362_LED_FUN(led),
+ BCM6362_MODE_FUN(usb_device_led),
+ BCM6362_MODE_FUN(sys_irq),
+ BCM6362_MODE_FUN(serial_led_clk),
+ BCM6362_MODE_FUN(serial_led_data),
+ BCM6362_MODE_FUN(robosw_led_data),
+ BCM6362_MODE_FUN(robosw_led_clk),
+ BCM6362_MODE_FUN(robosw_led0),
+ BCM6362_MODE_FUN(robosw_led1),
+ BCM6362_MODE_FUN(inet_led),
+ BCM6362_MODE_FUN(spi_cs2),
+ BCM6362_MODE_FUN(spi_cs3),
+ BCM6362_MODE_FUN(ntr_pulse),
+ BCM6362_MODE_FUN(uart1_scts),
+ BCM6362_MODE_FUN(uart1_srts),
+ BCM6362_MODE_FUN(uart1_sdin),
+ BCM6362_MODE_FUN(uart1_sdout),
+ BCM6362_MODE_FUN(adsl_spi_miso),
+ BCM6362_MODE_FUN(adsl_spi_mosi),
+ BCM6362_MODE_FUN(adsl_spi_clk),
+ BCM6362_MODE_FUN(adsl_spi_cs),
+ BCM6362_MODE_FUN(ephy0_led),
+ BCM6362_MODE_FUN(ephy1_led),
+ BCM6362_MODE_FUN(ephy2_led),
+ BCM6362_MODE_FUN(ephy3_led),
+ BCM6362_MODE_FUN(ext_irq0),
+ BCM6362_MODE_FUN(ext_irq1),
+ BCM6362_MODE_FUN(ext_irq2),
+ BCM6362_MODE_FUN(ext_irq3),
+ BCM6362_CTRL_FUN(wifi),
+ BCM6362_BASEMODE_FUN(nand, BASEMODE_NAND),
+};
+
+static int bcm6362_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6362_groups);
+}
+
+static const char *bcm6362_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned group)
+{
+ return bcm6362_groups[group].name;
+}
+
+static int bcm6362_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned group, const unsigned **pins,
+ unsigned *num_pins)
+{
+ *pins = bcm6362_groups[group].pins;
+ *num_pins = bcm6362_groups[group].num_pins;
+
+ return 0;
+}
+
+static int bcm6362_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6362_funcs);
+}
+
+static const char *bcm6362_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return bcm6362_funcs[selector].name;
+}
+
+static int bcm6362_pinctrl_get_groups(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ *groups = bcm6362_funcs[selector].groups;
+ *num_groups = bcm6362_funcs[selector].num_groups;
+
+ return 0;
+}
+
+static void bcm6362_set_gpio(struct bcm63xx_pinctrl *pc, unsigned pin)
+{
+ const struct pinctrl_pin_desc *desc = &bcm6362_pins[pin];
+ unsigned int mask = bcm63xx_bank_pin(pin);
+
+ if (desc->drv_data)
+ regmap_update_bits(pc->regs, BCM6362_BASEMODE_REG,
+ (uint32_t) desc->drv_data, 0);
+
+ if (pin < BCM63XX_BANK_GPIOS) {
+ /* base mode 0 => gpio 1 => mux function */
+ regmap_update_bits(pc->regs, BCM6362_MODE_REG, mask, 0);
+
+ /* pins 0-23 might be muxed to led */
+ if (pin < BCM6362_NUM_LEDS)
+ regmap_update_bits(pc->regs, BCM6362_LED_REG, mask, 0);
+ } else {
+ /* ctrl reg 0 => wifi function 1 => gpio */
+ regmap_update_bits(pc->regs, BCM6362_CTRL_REG, mask, mask);
+ }
+}
+
+static int bcm6362_pinctrl_set_mux(struct pinctrl_dev *pctldev,
+ unsigned selector, unsigned group)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ const struct bcm6362_pingroup *pg = &bcm6362_groups[group];
+ const struct bcm6362_function *f = &bcm6362_funcs[selector];
+ unsigned i;
+ unsigned int reg;
+ unsigned int val, mask;
+
+ for (i = 0; i < pg->num_pins; i++)
+ bcm6362_set_gpio(pc, pg->pins[i]);
+
+ switch (f->reg) {
+ case BCM6362_LEDCTRL:
+ reg = BCM6362_LED_REG;
+ mask = BIT(pg->pins[0]);
+ val = BIT(pg->pins[0]);
+ break;
+ case BCM6362_MODE:
+ reg = BCM6362_MODE_REG;
+ mask = BIT(pg->pins[0]);
+ val = BIT(pg->pins[0]);
+ break;
+ case BCM6362_CTRL:
+ reg = BCM6362_CTRL_REG;
+ mask = BIT(pg->pins[0]);
+ val = 0;
+ break;
+ case BCM6362_BASEMODE:
+ reg = BCM6362_BASEMODE_REG;
+ mask = f->basemode_mask;
+ val = f->basemode_mask;
+ break;
+ default:
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ regmap_update_bits(pc->regs, reg, mask, val);
+
+ return 0;
+}
+
+static int bcm6362_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+
+ /* disable all functions using this pin */
+ bcm6362_set_gpio(pc, offset);
+
+ return 0;
+}
+
+static struct pinctrl_ops bcm6362_pctl_ops = {
+ .dt_free_map = pinctrl_utils_free_map,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .get_group_name = bcm6362_pinctrl_get_group_name,
+ .get_group_pins = bcm6362_pinctrl_get_group_pins,
+ .get_groups_count = bcm6362_pinctrl_get_group_count,
+};
+
+static struct pinmux_ops bcm6362_pmx_ops = {
+ .get_function_groups = bcm6362_pinctrl_get_groups,
+ .get_function_name = bcm6362_pinctrl_get_func_name,
+ .get_functions_count = bcm6362_pinctrl_get_func_count,
+ .gpio_request_enable = bcm6362_gpio_request_enable,
+ .set_mux = bcm6362_pinctrl_set_mux,
+ .strict = true,
+};
+
+static const struct bcm63xx_pinctrl_soc bcm6362_soc = {
+ .ngpios = BCM6362_NUM_GPIOS,
+ .npins = ARRAY_SIZE(bcm6362_pins),
+ .pctl_ops = &bcm6362_pctl_ops,
+ .pins = bcm6362_pins,
+ .pmx_ops = &bcm6362_pmx_ops,
+};
+
+static int bcm6362_pinctrl_probe(struct platform_device *pdev)
+{
+ return bcm63xx_pinctrl_probe(pdev, &bcm6362_soc, NULL);
+}
+
+static const struct of_device_id bcm6362_pinctrl_match[] = {
+ { .compatible = "brcm,bcm6362-pinctrl", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver bcm6362_pinctrl_driver = {
+ .probe = bcm6362_pinctrl_probe,
+ .driver = {
+ .name = "bcm6362-pinctrl",
+ .of_match_table = bcm6362_pinctrl_match,
+ },
+};
+
+builtin_platform_driver(bcm6362_pinctrl_driver);
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v5 10/15] dt-bindings: add BCM6368 pincontroller binding documentation
2021-03-06 15:56 ` Álvaro Fernández Rojas
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
-1 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add binding documentation for the pincontrol core found in BCM6368 SoCs.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: change Documentation to dt-bindings in commit title
v4: no changes
v3: add new gpio node
v2: remove interrupts
.../pinctrl/brcm,bcm6368-pinctrl.yaml | 261 ++++++++++++++++++
1 file changed, 261 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
new file mode 100644
index 000000000000..6a289c93d6b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
@@ -0,0 +1,261 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6368-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6368 pin controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |+
+ The pin controller node should be the child of a syscon node.
+
+ Refer to the the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+ compatible:
+ const: brcm,bcm6368-pinctrl
+
+patternProperties:
+ '^gpio$':
+ type: object
+ properties:
+ compatible:
+ const: brcm,bcm6368-gpio
+
+ data:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the data register (in bytes).
+
+ dirout:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the dirout register (in bytes).
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ required:
+ - gpio-controller
+ - gpio-ranges
+ - '#gpio-cells'
+
+ '^.*$':
+ if:
+ type: object
+ then:
+ properties:
+ function:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ analog_afe_0, analog_afe_1, sys_irq, serial_led_data,
+ serial_led_clk, inet_led, ephy0_led, ephy1_led, ephy2_led,
+ ephy3_led, robosw_led_data, robosw_led_clk, robosw_led0,
+ robosw_led1, usb_device_led, pci_req1, pci_gnt1, pci_intb,
+ pci_req0, pci_gnt0, pcmcia_cd1, pcmcia_cd2, pcmcia_vs1,
+ pcmcia_vs2, ebi_cs2, ebi_cs3, spi_cs2, spi_cs3, spi_cs4,
+ spi_cs5, uart1 ]
+
+ pins:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14,
+ gpio16, gpio17, gpio18, gpio19, gpio20, gpio22, gpio23,
+ gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30,
+ gpio31, uart1_grp ]
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio_cntl@10000080 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x10000080 0x80>;
+
+ pinctrl: pinctrl {
+ compatible = "brcm,bcm6368-pinctrl";
+
+ gpio {
+ compatible = "brcm,bcm6368-gpio";
+ data = <0xc>;
+ dirout = <0x4>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 38>;
+ #gpio-cells = <2>;
+ };
+
+ pinctrl_analog_afe_0: analog_afe_0 {
+ function = "analog_afe_0";
+ pins = "gpio0";
+ };
+
+ pinctrl_analog_afe_1: analog_afe_1 {
+ function = "analog_afe_1";
+ pins = "gpio1";
+ };
+
+ pinctrl_sys_irq: sys_irq {
+ function = "sys_irq";
+ pins = "gpio2";
+ };
+
+ pinctrl_serial_led: serial_led {
+ pinctrl_serial_led_data: serial_led_data {
+ function = "serial_led_data";
+ pins = "gpio3";
+ };
+
+ pinctrl_serial_led_clk: serial_led_clk {
+ function = "serial_led_clk";
+ pins = "gpio4";
+ };
+ };
+
+ pinctrl_inet_led: inet_led {
+ function = "inet_led";
+ pins = "gpio5";
+ };
+
+ pinctrl_ephy0_led: ephy0_led {
+ function = "ephy0_led";
+ pins = "gpio6";
+ };
+
+ pinctrl_ephy1_led: ephy1_led {
+ function = "ephy1_led";
+ pins = "gpio7";
+ };
+
+ pinctrl_ephy2_led: ephy2_led {
+ function = "ephy2_led";
+ pins = "gpio8";
+ };
+
+ pinctrl_ephy3_led: ephy3_led {
+ function = "ephy3_led";
+ pins = "gpio9";
+ };
+
+ pinctrl_robosw_led_data: robosw_led_data {
+ function = "robosw_led_data";
+ pins = "gpio10";
+ };
+
+ pinctrl_robosw_led_clk: robosw_led_clk {
+ function = "robosw_led_clk";
+ pins = "gpio11";
+ };
+
+ pinctrl_robosw_led0: robosw_led0 {
+ function = "robosw_led0";
+ pins = "gpio12";
+ };
+
+ pinctrl_robosw_led1: robosw_led1 {
+ function = "robosw_led1";
+ pins = "gpio13";
+ };
+
+ pinctrl_usb_device_led: usb_device_led {
+ function = "usb_device_led";
+ pins = "gpio14";
+ };
+
+ pinctrl_pci: pci {
+ pinctrl_pci_req1: pci_req1 {
+ function = "pci_req1";
+ pins = "gpio16";
+ };
+
+ pinctrl_pci_gnt1: pci_gnt1 {
+ function = "pci_gnt1";
+ pins = "gpio17";
+ };
+
+ pinctrl_pci_intb: pci_intb {
+ function = "pci_intb";
+ pins = "gpio18";
+ };
+
+ pinctrl_pci_req0: pci_req0 {
+ function = "pci_req0";
+ pins = "gpio19";
+ };
+
+ pinctrl_pci_gnt0: pci_gnt0 {
+ function = "pci_gnt0";
+ pins = "gpio20";
+ };
+ };
+
+ pinctrl_pcmcia: pcmcia {
+ pinctrl_pcmcia_cd1: pcmcia_cd1 {
+ function = "pcmcia_cd1";
+ pins = "gpio22";
+ };
+
+ pinctrl_pcmcia_cd2: pcmcia_cd2 {
+ function = "pcmcia_cd2";
+ pins = "gpio23";
+ };
+
+ pinctrl_pcmcia_vs1: pcmcia_vs1 {
+ function = "pcmcia_vs1";
+ pins = "gpio24";
+ };
+
+ pinctrl_pcmcia_vs2: pcmcia_vs2 {
+ function = "pcmcia_vs2";
+ pins = "gpio25";
+ };
+ };
+
+ pinctrl_ebi_cs2: ebi_cs2 {
+ function = "ebi_cs2";
+ pins = "gpio26";
+ };
+
+ pinctrl_ebi_cs3: ebi_cs3 {
+ function = "ebi_cs3";
+ pins = "gpio27";
+ };
+
+ pinctrl_spi_cs2: spi_cs2 {
+ function = "spi_cs2";
+ pins = "gpio28";
+ };
+
+ pinctrl_spi_cs3: spi_cs3 {
+ function = "spi_cs3";
+ pins = "gpio29";
+ };
+
+ pinctrl_spi_cs4: spi_cs4 {
+ function = "spi_cs4";
+ pins = "gpio30";
+ };
+
+ pinctrl_spi_cs5: spi_cs5 {
+ function = "spi_cs5";
+ pins = "gpio31";
+ };
+
+ pinctrl_uart1: uart1 {
+ function = "uart1";
+ group = "uart1_grp";
+ };
+ };
+ };
--
2.20.1
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v5 10/15] dt-bindings: add BCM6368 pincontroller binding documentation
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
0 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add binding documentation for the pincontrol core found in BCM6368 SoCs.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: change Documentation to dt-bindings in commit title
v4: no changes
v3: add new gpio node
v2: remove interrupts
.../pinctrl/brcm,bcm6368-pinctrl.yaml | 261 ++++++++++++++++++
1 file changed, 261 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
new file mode 100644
index 000000000000..6a289c93d6b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
@@ -0,0 +1,261 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6368-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6368 pin controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |+
+ The pin controller node should be the child of a syscon node.
+
+ Refer to the the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+ compatible:
+ const: brcm,bcm6368-pinctrl
+
+patternProperties:
+ '^gpio$':
+ type: object
+ properties:
+ compatible:
+ const: brcm,bcm6368-gpio
+
+ data:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the data register (in bytes).
+
+ dirout:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the dirout register (in bytes).
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ required:
+ - gpio-controller
+ - gpio-ranges
+ - '#gpio-cells'
+
+ '^.*$':
+ if:
+ type: object
+ then:
+ properties:
+ function:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ analog_afe_0, analog_afe_1, sys_irq, serial_led_data,
+ serial_led_clk, inet_led, ephy0_led, ephy1_led, ephy2_led,
+ ephy3_led, robosw_led_data, robosw_led_clk, robosw_led0,
+ robosw_led1, usb_device_led, pci_req1, pci_gnt1, pci_intb,
+ pci_req0, pci_gnt0, pcmcia_cd1, pcmcia_cd2, pcmcia_vs1,
+ pcmcia_vs2, ebi_cs2, ebi_cs3, spi_cs2, spi_cs3, spi_cs4,
+ spi_cs5, uart1 ]
+
+ pins:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14,
+ gpio16, gpio17, gpio18, gpio19, gpio20, gpio22, gpio23,
+ gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30,
+ gpio31, uart1_grp ]
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio_cntl@10000080 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x10000080 0x80>;
+
+ pinctrl: pinctrl {
+ compatible = "brcm,bcm6368-pinctrl";
+
+ gpio {
+ compatible = "brcm,bcm6368-gpio";
+ data = <0xc>;
+ dirout = <0x4>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 38>;
+ #gpio-cells = <2>;
+ };
+
+ pinctrl_analog_afe_0: analog_afe_0 {
+ function = "analog_afe_0";
+ pins = "gpio0";
+ };
+
+ pinctrl_analog_afe_1: analog_afe_1 {
+ function = "analog_afe_1";
+ pins = "gpio1";
+ };
+
+ pinctrl_sys_irq: sys_irq {
+ function = "sys_irq";
+ pins = "gpio2";
+ };
+
+ pinctrl_serial_led: serial_led {
+ pinctrl_serial_led_data: serial_led_data {
+ function = "serial_led_data";
+ pins = "gpio3";
+ };
+
+ pinctrl_serial_led_clk: serial_led_clk {
+ function = "serial_led_clk";
+ pins = "gpio4";
+ };
+ };
+
+ pinctrl_inet_led: inet_led {
+ function = "inet_led";
+ pins = "gpio5";
+ };
+
+ pinctrl_ephy0_led: ephy0_led {
+ function = "ephy0_led";
+ pins = "gpio6";
+ };
+
+ pinctrl_ephy1_led: ephy1_led {
+ function = "ephy1_led";
+ pins = "gpio7";
+ };
+
+ pinctrl_ephy2_led: ephy2_led {
+ function = "ephy2_led";
+ pins = "gpio8";
+ };
+
+ pinctrl_ephy3_led: ephy3_led {
+ function = "ephy3_led";
+ pins = "gpio9";
+ };
+
+ pinctrl_robosw_led_data: robosw_led_data {
+ function = "robosw_led_data";
+ pins = "gpio10";
+ };
+
+ pinctrl_robosw_led_clk: robosw_led_clk {
+ function = "robosw_led_clk";
+ pins = "gpio11";
+ };
+
+ pinctrl_robosw_led0: robosw_led0 {
+ function = "robosw_led0";
+ pins = "gpio12";
+ };
+
+ pinctrl_robosw_led1: robosw_led1 {
+ function = "robosw_led1";
+ pins = "gpio13";
+ };
+
+ pinctrl_usb_device_led: usb_device_led {
+ function = "usb_device_led";
+ pins = "gpio14";
+ };
+
+ pinctrl_pci: pci {
+ pinctrl_pci_req1: pci_req1 {
+ function = "pci_req1";
+ pins = "gpio16";
+ };
+
+ pinctrl_pci_gnt1: pci_gnt1 {
+ function = "pci_gnt1";
+ pins = "gpio17";
+ };
+
+ pinctrl_pci_intb: pci_intb {
+ function = "pci_intb";
+ pins = "gpio18";
+ };
+
+ pinctrl_pci_req0: pci_req0 {
+ function = "pci_req0";
+ pins = "gpio19";
+ };
+
+ pinctrl_pci_gnt0: pci_gnt0 {
+ function = "pci_gnt0";
+ pins = "gpio20";
+ };
+ };
+
+ pinctrl_pcmcia: pcmcia {
+ pinctrl_pcmcia_cd1: pcmcia_cd1 {
+ function = "pcmcia_cd1";
+ pins = "gpio22";
+ };
+
+ pinctrl_pcmcia_cd2: pcmcia_cd2 {
+ function = "pcmcia_cd2";
+ pins = "gpio23";
+ };
+
+ pinctrl_pcmcia_vs1: pcmcia_vs1 {
+ function = "pcmcia_vs1";
+ pins = "gpio24";
+ };
+
+ pinctrl_pcmcia_vs2: pcmcia_vs2 {
+ function = "pcmcia_vs2";
+ pins = "gpio25";
+ };
+ };
+
+ pinctrl_ebi_cs2: ebi_cs2 {
+ function = "ebi_cs2";
+ pins = "gpio26";
+ };
+
+ pinctrl_ebi_cs3: ebi_cs3 {
+ function = "ebi_cs3";
+ pins = "gpio27";
+ };
+
+ pinctrl_spi_cs2: spi_cs2 {
+ function = "spi_cs2";
+ pins = "gpio28";
+ };
+
+ pinctrl_spi_cs3: spi_cs3 {
+ function = "spi_cs3";
+ pins = "gpio29";
+ };
+
+ pinctrl_spi_cs4: spi_cs4 {
+ function = "spi_cs4";
+ pins = "gpio30";
+ };
+
+ pinctrl_spi_cs5: spi_cs5 {
+ function = "spi_cs5";
+ pins = "gpio31";
+ };
+
+ pinctrl_uart1: uart1 {
+ function = "uart1";
+ group = "uart1_grp";
+ };
+ };
+ };
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v5 11/15] pinctrl: add a pincontrol driver for BCM6368
2021-03-06 15:56 ` Álvaro Fernández Rojas
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
-1 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32
GPIOs onto alternative functions. Not all are documented.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: add changes suggested by Andy Shevchenko
v4: no changes
v3: use new shared code
v2: switch to GPIO_REGMAP
drivers/pinctrl/bcm/Kconfig | 8 +
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-bcm6368.c | 523 ++++++++++++++++++++++++++
3 files changed, 532 insertions(+)
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6368.c
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index d3101d5e750f..aabd4b762aed 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -60,6 +60,14 @@ config PINCTRL_BCM6362
help
Say Y here to enable the Broadcom BCM6362 GPIO driver.
+config PINCTRL_BCM6368
+ bool "Broadcom BCM6368 GPIO driver"
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
+ select PINCTRL_BCM63XX
+ default BMIPS_GENERIC
+ help
+ Say Y here to enable the Broadcom BCM6368 GPIO driver.
+
config PINCTRL_IPROC_GPIO
bool "Broadcom iProc GPIO (with PINCONF) driver"
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index b9b09e5b914c..a1331bb9680e 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
+obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o
obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o
obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm6368.c b/drivers/pinctrl/bcm/pinctrl-bcm6368.c
new file mode 100644
index 000000000000..838095f9e890
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6368.c
@@ -0,0 +1,523 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for BCM6368 GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "../pinctrl-utils.h"
+
+#include "pinctrl-bcm63xx.h"
+
+#define BCM6368_NUM_GPIOS 38
+
+#define BCM6368_MODE_REG 0x18
+#define BCM6368_BASEMODE_REG 0x38
+#define BCM6368_BASEMODE_MASK 0x7
+#define BCM6368_BASEMODE_GPIO 0x0
+#define BCM6368_BASEMODE_UART1 0x1
+
+struct bcm6368_pingroup {
+ const char *name;
+ const unsigned * const pins;
+ const unsigned num_pins;
+};
+
+struct bcm6368_function {
+ const char *name;
+ const char * const *groups;
+ const unsigned num_groups;
+
+ unsigned dir_out:16;
+ unsigned basemode:3;
+};
+
+struct bcm6368_priv {
+ struct regmap_field *overlays;
+};
+
+#define BCM6368_BASEMODE_PIN(a, b) \
+ { \
+ .number = a, \
+ .name = b, \
+ .drv_data = (void *)true \
+ }
+
+static const struct pinctrl_pin_desc bcm6368_pins[] = {
+ PINCTRL_PIN(0, "gpio0"),
+ PINCTRL_PIN(1, "gpio1"),
+ PINCTRL_PIN(2, "gpio2"),
+ PINCTRL_PIN(3, "gpio3"),
+ PINCTRL_PIN(4, "gpio4"),
+ PINCTRL_PIN(5, "gpio5"),
+ PINCTRL_PIN(6, "gpio6"),
+ PINCTRL_PIN(7, "gpio7"),
+ PINCTRL_PIN(8, "gpio8"),
+ PINCTRL_PIN(9, "gpio9"),
+ PINCTRL_PIN(10, "gpio10"),
+ PINCTRL_PIN(11, "gpio11"),
+ PINCTRL_PIN(12, "gpio12"),
+ PINCTRL_PIN(13, "gpio13"),
+ PINCTRL_PIN(14, "gpio14"),
+ PINCTRL_PIN(15, "gpio15"),
+ PINCTRL_PIN(16, "gpio16"),
+ PINCTRL_PIN(17, "gpio17"),
+ PINCTRL_PIN(18, "gpio18"),
+ PINCTRL_PIN(19, "gpio19"),
+ PINCTRL_PIN(20, "gpio20"),
+ PINCTRL_PIN(21, "gpio21"),
+ PINCTRL_PIN(22, "gpio22"),
+ PINCTRL_PIN(23, "gpio23"),
+ PINCTRL_PIN(24, "gpio24"),
+ PINCTRL_PIN(25, "gpio25"),
+ PINCTRL_PIN(26, "gpio26"),
+ PINCTRL_PIN(27, "gpio27"),
+ PINCTRL_PIN(28, "gpio28"),
+ PINCTRL_PIN(29, "gpio29"),
+ BCM6368_BASEMODE_PIN(30, "gpio30"),
+ BCM6368_BASEMODE_PIN(31, "gpio31"),
+ BCM6368_BASEMODE_PIN(32, "gpio32"),
+ BCM6368_BASEMODE_PIN(33, "gpio33"),
+ PINCTRL_PIN(34, "gpio34"),
+ PINCTRL_PIN(35, "gpio35"),
+ PINCTRL_PIN(36, "gpio36"),
+ PINCTRL_PIN(37, "gpio37"),
+};
+
+static unsigned gpio0_pins[] = { 0 };
+static unsigned gpio1_pins[] = { 1 };
+static unsigned gpio2_pins[] = { 2 };
+static unsigned gpio3_pins[] = { 3 };
+static unsigned gpio4_pins[] = { 4 };
+static unsigned gpio5_pins[] = { 5 };
+static unsigned gpio6_pins[] = { 6 };
+static unsigned gpio7_pins[] = { 7 };
+static unsigned gpio8_pins[] = { 8 };
+static unsigned gpio9_pins[] = { 9 };
+static unsigned gpio10_pins[] = { 10 };
+static unsigned gpio11_pins[] = { 11 };
+static unsigned gpio12_pins[] = { 12 };
+static unsigned gpio13_pins[] = { 13 };
+static unsigned gpio14_pins[] = { 14 };
+static unsigned gpio15_pins[] = { 15 };
+static unsigned gpio16_pins[] = { 16 };
+static unsigned gpio17_pins[] = { 17 };
+static unsigned gpio18_pins[] = { 18 };
+static unsigned gpio19_pins[] = { 19 };
+static unsigned gpio20_pins[] = { 20 };
+static unsigned gpio21_pins[] = { 21 };
+static unsigned gpio22_pins[] = { 22 };
+static unsigned gpio23_pins[] = { 23 };
+static unsigned gpio24_pins[] = { 24 };
+static unsigned gpio25_pins[] = { 25 };
+static unsigned gpio26_pins[] = { 26 };
+static unsigned gpio27_pins[] = { 27 };
+static unsigned gpio28_pins[] = { 28 };
+static unsigned gpio29_pins[] = { 29 };
+static unsigned gpio30_pins[] = { 30 };
+static unsigned gpio31_pins[] = { 31 };
+static unsigned uart1_grp_pins[] = { 30, 31, 32, 33 };
+
+#define BCM6368_GROUP(n) \
+ { \
+ .name = #n, \
+ .pins = n##_pins, \
+ .num_pins = ARRAY_SIZE(n##_pins), \
+ }
+
+static struct bcm6368_pingroup bcm6368_groups[] = {
+ BCM6368_GROUP(gpio0),
+ BCM6368_GROUP(gpio1),
+ BCM6368_GROUP(gpio2),
+ BCM6368_GROUP(gpio3),
+ BCM6368_GROUP(gpio4),
+ BCM6368_GROUP(gpio5),
+ BCM6368_GROUP(gpio6),
+ BCM6368_GROUP(gpio7),
+ BCM6368_GROUP(gpio8),
+ BCM6368_GROUP(gpio9),
+ BCM6368_GROUP(gpio10),
+ BCM6368_GROUP(gpio11),
+ BCM6368_GROUP(gpio12),
+ BCM6368_GROUP(gpio13),
+ BCM6368_GROUP(gpio14),
+ BCM6368_GROUP(gpio15),
+ BCM6368_GROUP(gpio16),
+ BCM6368_GROUP(gpio17),
+ BCM6368_GROUP(gpio18),
+ BCM6368_GROUP(gpio19),
+ BCM6368_GROUP(gpio20),
+ BCM6368_GROUP(gpio21),
+ BCM6368_GROUP(gpio22),
+ BCM6368_GROUP(gpio23),
+ BCM6368_GROUP(gpio24),
+ BCM6368_GROUP(gpio25),
+ BCM6368_GROUP(gpio26),
+ BCM6368_GROUP(gpio27),
+ BCM6368_GROUP(gpio28),
+ BCM6368_GROUP(gpio29),
+ BCM6368_GROUP(gpio30),
+ BCM6368_GROUP(gpio31),
+ BCM6368_GROUP(uart1_grp),
+};
+
+static const char * const analog_afe_0_groups[] = {
+ "gpio0",
+};
+
+static const char * const analog_afe_1_groups[] = {
+ "gpio1",
+};
+
+static const char * const sys_irq_groups[] = {
+ "gpio2",
+};
+
+static const char * const serial_led_data_groups[] = {
+ "gpio3",
+};
+
+static const char * const serial_led_clk_groups[] = {
+ "gpio4",
+};
+
+static const char * const inet_led_groups[] = {
+ "gpio5",
+};
+
+static const char * const ephy0_led_groups[] = {
+ "gpio6",
+};
+
+static const char * const ephy1_led_groups[] = {
+ "gpio7",
+};
+
+static const char * const ephy2_led_groups[] = {
+ "gpio8",
+};
+
+static const char * const ephy3_led_groups[] = {
+ "gpio9",
+};
+
+static const char * const robosw_led_data_groups[] = {
+ "gpio10",
+};
+
+static const char * const robosw_led_clk_groups[] = {
+ "gpio11",
+};
+
+static const char * const robosw_led0_groups[] = {
+ "gpio12",
+};
+
+static const char * const robosw_led1_groups[] = {
+ "gpio13",
+};
+
+static const char * const usb_device_led_groups[] = {
+ "gpio14",
+};
+
+static const char * const pci_req1_groups[] = {
+ "gpio16",
+};
+
+static const char * const pci_gnt1_groups[] = {
+ "gpio17",
+};
+
+static const char * const pci_intb_groups[] = {
+ "gpio18",
+};
+
+static const char * const pci_req0_groups[] = {
+ "gpio19",
+};
+
+static const char * const pci_gnt0_groups[] = {
+ "gpio20",
+};
+
+static const char * const pcmcia_cd1_groups[] = {
+ "gpio22",
+};
+
+static const char * const pcmcia_cd2_groups[] = {
+ "gpio23",
+};
+
+static const char * const pcmcia_vs1_groups[] = {
+ "gpio24",
+};
+
+static const char * const pcmcia_vs2_groups[] = {
+ "gpio25",
+};
+
+static const char * const ebi_cs2_groups[] = {
+ "gpio26",
+};
+
+static const char * const ebi_cs3_groups[] = {
+ "gpio27",
+};
+
+static const char * const spi_cs2_groups[] = {
+ "gpio28",
+};
+
+static const char * const spi_cs3_groups[] = {
+ "gpio29",
+};
+
+static const char * const spi_cs4_groups[] = {
+ "gpio30",
+};
+
+static const char * const spi_cs5_groups[] = {
+ "gpio31",
+};
+
+static const char * const uart1_groups[] = {
+ "uart1_grp",
+};
+
+#define BCM6368_FUN(n, out) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .dir_out = out, \
+ }
+
+#define BCM6368_BASEMODE_FUN(n, val, out) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .basemode = BCM6368_BASEMODE_##val, \
+ .dir_out = out, \
+ }
+
+static const struct bcm6368_function bcm6368_funcs[] = {
+ BCM6368_FUN(analog_afe_0, 1),
+ BCM6368_FUN(analog_afe_1, 1),
+ BCM6368_FUN(sys_irq, 1),
+ BCM6368_FUN(serial_led_data, 1),
+ BCM6368_FUN(serial_led_clk, 1),
+ BCM6368_FUN(inet_led, 1),
+ BCM6368_FUN(ephy0_led, 1),
+ BCM6368_FUN(ephy1_led, 1),
+ BCM6368_FUN(ephy2_led, 1),
+ BCM6368_FUN(ephy3_led, 1),
+ BCM6368_FUN(robosw_led_data, 1),
+ BCM6368_FUN(robosw_led_clk, 1),
+ BCM6368_FUN(robosw_led0, 1),
+ BCM6368_FUN(robosw_led1, 1),
+ BCM6368_FUN(usb_device_led, 1),
+ BCM6368_FUN(pci_req1, 0),
+ BCM6368_FUN(pci_gnt1, 0),
+ BCM6368_FUN(pci_intb, 0),
+ BCM6368_FUN(pci_req0, 0),
+ BCM6368_FUN(pci_gnt0, 0),
+ BCM6368_FUN(pcmcia_cd1, 0),
+ BCM6368_FUN(pcmcia_cd2, 0),
+ BCM6368_FUN(pcmcia_vs1, 0),
+ BCM6368_FUN(pcmcia_vs2, 0),
+ BCM6368_FUN(ebi_cs2, 1),
+ BCM6368_FUN(ebi_cs3, 1),
+ BCM6368_FUN(spi_cs2, 1),
+ BCM6368_FUN(spi_cs3, 1),
+ BCM6368_FUN(spi_cs4, 1),
+ BCM6368_FUN(spi_cs5, 1),
+ BCM6368_BASEMODE_FUN(uart1, UART1, 0x6),
+};
+
+static int bcm6368_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6368_groups);
+}
+
+static const char *bcm6368_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned group)
+{
+ return bcm6368_groups[group].name;
+}
+
+static int bcm6368_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned group, const unsigned **pins,
+ unsigned *num_pins)
+{
+ *pins = bcm6368_groups[group].pins;
+ *num_pins = bcm6368_groups[group].num_pins;
+
+ return 0;
+}
+
+static int bcm6368_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6368_funcs);
+}
+
+static const char *bcm6368_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return bcm6368_funcs[selector].name;
+}
+
+static int bcm6368_pinctrl_get_groups(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ *groups = bcm6368_funcs[selector].groups;
+ *num_groups = bcm6368_funcs[selector].num_groups;
+
+ return 0;
+}
+
+static int bcm6368_pinctrl_set_mux(struct pinctrl_dev *pctldev,
+ unsigned selector, unsigned group)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ struct bcm6368_priv *priv = pc->driver_data;
+ const struct bcm6368_pingroup *pg = &bcm6368_groups[group];
+ const struct bcm6368_function *fun = &bcm6368_funcs[selector];
+ int i, pin;
+
+ if (fun->basemode) {
+ unsigned int mask = 0;
+
+ for (i = 0; i < pg->num_pins; i++) {
+ pin = pg->pins[i];
+ if (pin < BCM63XX_BANK_GPIOS)
+ mask |= BIT(pin);
+ }
+
+ regmap_update_bits(pc->regs, BCM6368_MODE_REG, mask, 0);
+ regmap_field_write(priv->overlays, fun->basemode);
+ } else {
+ pin = pg->pins[0];
+
+ if (bcm6368_pins[pin].drv_data)
+ regmap_field_write(priv->overlays,
+ BCM6368_BASEMODE_GPIO);
+
+ regmap_update_bits(pc->regs, BCM6368_MODE_REG, BIT(pin),
+ BIT(pin));
+ }
+
+ for (pin = 0; pin < pg->num_pins; pin++) {
+ struct pinctrl_gpio_range *range;
+ int hw_gpio = bcm6368_pins[pin].number;
+
+ range = pinctrl_find_gpio_range_from_pin(pctldev, hw_gpio);
+ if (range) {
+ struct gpio_chip *gc = range->gc;
+
+ if (fun->dir_out & BIT(pin))
+ gc->direction_output(gc, hw_gpio, 0);
+ else
+ gc->direction_input(gc, hw_gpio);
+ }
+ }
+
+ return 0;
+}
+
+static int bcm6368_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ struct bcm6368_priv *priv = pc->driver_data;
+
+ if (offset >= BCM63XX_BANK_GPIOS && !bcm6368_pins[offset].drv_data)
+ return 0;
+
+ /* disable all functions using this pin */
+ if (offset < BCM63XX_BANK_GPIOS)
+ regmap_update_bits(pc->regs, BCM6368_MODE_REG, BIT(offset), 0);
+
+ if (bcm6368_pins[offset].drv_data)
+ regmap_field_write(priv->overlays, BCM6368_BASEMODE_GPIO);
+
+ return 0;
+}
+
+static struct pinctrl_ops bcm6368_pctl_ops = {
+ .dt_free_map = pinctrl_utils_free_map,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .get_group_name = bcm6368_pinctrl_get_group_name,
+ .get_group_pins = bcm6368_pinctrl_get_group_pins,
+ .get_groups_count = bcm6368_pinctrl_get_group_count,
+};
+
+static struct pinmux_ops bcm6368_pmx_ops = {
+ .get_function_groups = bcm6368_pinctrl_get_groups,
+ .get_function_name = bcm6368_pinctrl_get_func_name,
+ .get_functions_count = bcm6368_pinctrl_get_func_count,
+ .gpio_request_enable = bcm6368_gpio_request_enable,
+ .set_mux = bcm6368_pinctrl_set_mux,
+ .strict = true,
+};
+
+static const struct bcm63xx_pinctrl_soc bcm6368_soc = {
+ .ngpios = BCM6368_NUM_GPIOS,
+ .npins = ARRAY_SIZE(bcm6368_pins),
+ .pctl_ops = &bcm6368_pctl_ops,
+ .pins = bcm6368_pins,
+ .pmx_ops = &bcm6368_pmx_ops,
+};
+
+static int bcm6368_pinctrl_probe(struct platform_device *pdev)
+{
+ struct reg_field overlays = REG_FIELD(BCM6368_BASEMODE_REG, 0, 15);
+ struct device *dev = &pdev->dev;
+ struct bcm63xx_pinctrl *pc;
+ struct bcm6368_priv *priv;
+ int err;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ err = bcm63xx_pinctrl_probe(pdev, &bcm6368_soc, (void *) priv);
+ if (err)
+ return err;
+
+ pc = platform_get_drvdata(pdev);
+
+ priv->overlays = devm_regmap_field_alloc(dev, pc->regs, overlays);
+ if (IS_ERR(priv->overlays))
+ return PTR_ERR(priv->overlays);
+
+ return 0;
+}
+
+static const struct of_device_id bcm6368_pinctrl_match[] = {
+ { .compatible = "brcm,bcm6368-pinctrl", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver bcm6368_pinctrl_driver = {
+ .probe = bcm6368_pinctrl_probe,
+ .driver = {
+ .name = "bcm6368-pinctrl",
+ .of_match_table = bcm6368_pinctrl_match,
+ },
+};
+
+builtin_platform_driver(bcm6368_pinctrl_driver);
--
2.20.1
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v5 11/15] pinctrl: add a pincontrol driver for BCM6368
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
0 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32
GPIOs onto alternative functions. Not all are documented.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: add changes suggested by Andy Shevchenko
v4: no changes
v3: use new shared code
v2: switch to GPIO_REGMAP
drivers/pinctrl/bcm/Kconfig | 8 +
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-bcm6368.c | 523 ++++++++++++++++++++++++++
3 files changed, 532 insertions(+)
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6368.c
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index d3101d5e750f..aabd4b762aed 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -60,6 +60,14 @@ config PINCTRL_BCM6362
help
Say Y here to enable the Broadcom BCM6362 GPIO driver.
+config PINCTRL_BCM6368
+ bool "Broadcom BCM6368 GPIO driver"
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
+ select PINCTRL_BCM63XX
+ default BMIPS_GENERIC
+ help
+ Say Y here to enable the Broadcom BCM6368 GPIO driver.
+
config PINCTRL_IPROC_GPIO
bool "Broadcom iProc GPIO (with PINCONF) driver"
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index b9b09e5b914c..a1331bb9680e 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
+obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o
obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o
obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm6368.c b/drivers/pinctrl/bcm/pinctrl-bcm6368.c
new file mode 100644
index 000000000000..838095f9e890
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6368.c
@@ -0,0 +1,523 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for BCM6368 GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "../pinctrl-utils.h"
+
+#include "pinctrl-bcm63xx.h"
+
+#define BCM6368_NUM_GPIOS 38
+
+#define BCM6368_MODE_REG 0x18
+#define BCM6368_BASEMODE_REG 0x38
+#define BCM6368_BASEMODE_MASK 0x7
+#define BCM6368_BASEMODE_GPIO 0x0
+#define BCM6368_BASEMODE_UART1 0x1
+
+struct bcm6368_pingroup {
+ const char *name;
+ const unsigned * const pins;
+ const unsigned num_pins;
+};
+
+struct bcm6368_function {
+ const char *name;
+ const char * const *groups;
+ const unsigned num_groups;
+
+ unsigned dir_out:16;
+ unsigned basemode:3;
+};
+
+struct bcm6368_priv {
+ struct regmap_field *overlays;
+};
+
+#define BCM6368_BASEMODE_PIN(a, b) \
+ { \
+ .number = a, \
+ .name = b, \
+ .drv_data = (void *)true \
+ }
+
+static const struct pinctrl_pin_desc bcm6368_pins[] = {
+ PINCTRL_PIN(0, "gpio0"),
+ PINCTRL_PIN(1, "gpio1"),
+ PINCTRL_PIN(2, "gpio2"),
+ PINCTRL_PIN(3, "gpio3"),
+ PINCTRL_PIN(4, "gpio4"),
+ PINCTRL_PIN(5, "gpio5"),
+ PINCTRL_PIN(6, "gpio6"),
+ PINCTRL_PIN(7, "gpio7"),
+ PINCTRL_PIN(8, "gpio8"),
+ PINCTRL_PIN(9, "gpio9"),
+ PINCTRL_PIN(10, "gpio10"),
+ PINCTRL_PIN(11, "gpio11"),
+ PINCTRL_PIN(12, "gpio12"),
+ PINCTRL_PIN(13, "gpio13"),
+ PINCTRL_PIN(14, "gpio14"),
+ PINCTRL_PIN(15, "gpio15"),
+ PINCTRL_PIN(16, "gpio16"),
+ PINCTRL_PIN(17, "gpio17"),
+ PINCTRL_PIN(18, "gpio18"),
+ PINCTRL_PIN(19, "gpio19"),
+ PINCTRL_PIN(20, "gpio20"),
+ PINCTRL_PIN(21, "gpio21"),
+ PINCTRL_PIN(22, "gpio22"),
+ PINCTRL_PIN(23, "gpio23"),
+ PINCTRL_PIN(24, "gpio24"),
+ PINCTRL_PIN(25, "gpio25"),
+ PINCTRL_PIN(26, "gpio26"),
+ PINCTRL_PIN(27, "gpio27"),
+ PINCTRL_PIN(28, "gpio28"),
+ PINCTRL_PIN(29, "gpio29"),
+ BCM6368_BASEMODE_PIN(30, "gpio30"),
+ BCM6368_BASEMODE_PIN(31, "gpio31"),
+ BCM6368_BASEMODE_PIN(32, "gpio32"),
+ BCM6368_BASEMODE_PIN(33, "gpio33"),
+ PINCTRL_PIN(34, "gpio34"),
+ PINCTRL_PIN(35, "gpio35"),
+ PINCTRL_PIN(36, "gpio36"),
+ PINCTRL_PIN(37, "gpio37"),
+};
+
+static unsigned gpio0_pins[] = { 0 };
+static unsigned gpio1_pins[] = { 1 };
+static unsigned gpio2_pins[] = { 2 };
+static unsigned gpio3_pins[] = { 3 };
+static unsigned gpio4_pins[] = { 4 };
+static unsigned gpio5_pins[] = { 5 };
+static unsigned gpio6_pins[] = { 6 };
+static unsigned gpio7_pins[] = { 7 };
+static unsigned gpio8_pins[] = { 8 };
+static unsigned gpio9_pins[] = { 9 };
+static unsigned gpio10_pins[] = { 10 };
+static unsigned gpio11_pins[] = { 11 };
+static unsigned gpio12_pins[] = { 12 };
+static unsigned gpio13_pins[] = { 13 };
+static unsigned gpio14_pins[] = { 14 };
+static unsigned gpio15_pins[] = { 15 };
+static unsigned gpio16_pins[] = { 16 };
+static unsigned gpio17_pins[] = { 17 };
+static unsigned gpio18_pins[] = { 18 };
+static unsigned gpio19_pins[] = { 19 };
+static unsigned gpio20_pins[] = { 20 };
+static unsigned gpio21_pins[] = { 21 };
+static unsigned gpio22_pins[] = { 22 };
+static unsigned gpio23_pins[] = { 23 };
+static unsigned gpio24_pins[] = { 24 };
+static unsigned gpio25_pins[] = { 25 };
+static unsigned gpio26_pins[] = { 26 };
+static unsigned gpio27_pins[] = { 27 };
+static unsigned gpio28_pins[] = { 28 };
+static unsigned gpio29_pins[] = { 29 };
+static unsigned gpio30_pins[] = { 30 };
+static unsigned gpio31_pins[] = { 31 };
+static unsigned uart1_grp_pins[] = { 30, 31, 32, 33 };
+
+#define BCM6368_GROUP(n) \
+ { \
+ .name = #n, \
+ .pins = n##_pins, \
+ .num_pins = ARRAY_SIZE(n##_pins), \
+ }
+
+static struct bcm6368_pingroup bcm6368_groups[] = {
+ BCM6368_GROUP(gpio0),
+ BCM6368_GROUP(gpio1),
+ BCM6368_GROUP(gpio2),
+ BCM6368_GROUP(gpio3),
+ BCM6368_GROUP(gpio4),
+ BCM6368_GROUP(gpio5),
+ BCM6368_GROUP(gpio6),
+ BCM6368_GROUP(gpio7),
+ BCM6368_GROUP(gpio8),
+ BCM6368_GROUP(gpio9),
+ BCM6368_GROUP(gpio10),
+ BCM6368_GROUP(gpio11),
+ BCM6368_GROUP(gpio12),
+ BCM6368_GROUP(gpio13),
+ BCM6368_GROUP(gpio14),
+ BCM6368_GROUP(gpio15),
+ BCM6368_GROUP(gpio16),
+ BCM6368_GROUP(gpio17),
+ BCM6368_GROUP(gpio18),
+ BCM6368_GROUP(gpio19),
+ BCM6368_GROUP(gpio20),
+ BCM6368_GROUP(gpio21),
+ BCM6368_GROUP(gpio22),
+ BCM6368_GROUP(gpio23),
+ BCM6368_GROUP(gpio24),
+ BCM6368_GROUP(gpio25),
+ BCM6368_GROUP(gpio26),
+ BCM6368_GROUP(gpio27),
+ BCM6368_GROUP(gpio28),
+ BCM6368_GROUP(gpio29),
+ BCM6368_GROUP(gpio30),
+ BCM6368_GROUP(gpio31),
+ BCM6368_GROUP(uart1_grp),
+};
+
+static const char * const analog_afe_0_groups[] = {
+ "gpio0",
+};
+
+static const char * const analog_afe_1_groups[] = {
+ "gpio1",
+};
+
+static const char * const sys_irq_groups[] = {
+ "gpio2",
+};
+
+static const char * const serial_led_data_groups[] = {
+ "gpio3",
+};
+
+static const char * const serial_led_clk_groups[] = {
+ "gpio4",
+};
+
+static const char * const inet_led_groups[] = {
+ "gpio5",
+};
+
+static const char * const ephy0_led_groups[] = {
+ "gpio6",
+};
+
+static const char * const ephy1_led_groups[] = {
+ "gpio7",
+};
+
+static const char * const ephy2_led_groups[] = {
+ "gpio8",
+};
+
+static const char * const ephy3_led_groups[] = {
+ "gpio9",
+};
+
+static const char * const robosw_led_data_groups[] = {
+ "gpio10",
+};
+
+static const char * const robosw_led_clk_groups[] = {
+ "gpio11",
+};
+
+static const char * const robosw_led0_groups[] = {
+ "gpio12",
+};
+
+static const char * const robosw_led1_groups[] = {
+ "gpio13",
+};
+
+static const char * const usb_device_led_groups[] = {
+ "gpio14",
+};
+
+static const char * const pci_req1_groups[] = {
+ "gpio16",
+};
+
+static const char * const pci_gnt1_groups[] = {
+ "gpio17",
+};
+
+static const char * const pci_intb_groups[] = {
+ "gpio18",
+};
+
+static const char * const pci_req0_groups[] = {
+ "gpio19",
+};
+
+static const char * const pci_gnt0_groups[] = {
+ "gpio20",
+};
+
+static const char * const pcmcia_cd1_groups[] = {
+ "gpio22",
+};
+
+static const char * const pcmcia_cd2_groups[] = {
+ "gpio23",
+};
+
+static const char * const pcmcia_vs1_groups[] = {
+ "gpio24",
+};
+
+static const char * const pcmcia_vs2_groups[] = {
+ "gpio25",
+};
+
+static const char * const ebi_cs2_groups[] = {
+ "gpio26",
+};
+
+static const char * const ebi_cs3_groups[] = {
+ "gpio27",
+};
+
+static const char * const spi_cs2_groups[] = {
+ "gpio28",
+};
+
+static const char * const spi_cs3_groups[] = {
+ "gpio29",
+};
+
+static const char * const spi_cs4_groups[] = {
+ "gpio30",
+};
+
+static const char * const spi_cs5_groups[] = {
+ "gpio31",
+};
+
+static const char * const uart1_groups[] = {
+ "uart1_grp",
+};
+
+#define BCM6368_FUN(n, out) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .dir_out = out, \
+ }
+
+#define BCM6368_BASEMODE_FUN(n, val, out) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .basemode = BCM6368_BASEMODE_##val, \
+ .dir_out = out, \
+ }
+
+static const struct bcm6368_function bcm6368_funcs[] = {
+ BCM6368_FUN(analog_afe_0, 1),
+ BCM6368_FUN(analog_afe_1, 1),
+ BCM6368_FUN(sys_irq, 1),
+ BCM6368_FUN(serial_led_data, 1),
+ BCM6368_FUN(serial_led_clk, 1),
+ BCM6368_FUN(inet_led, 1),
+ BCM6368_FUN(ephy0_led, 1),
+ BCM6368_FUN(ephy1_led, 1),
+ BCM6368_FUN(ephy2_led, 1),
+ BCM6368_FUN(ephy3_led, 1),
+ BCM6368_FUN(robosw_led_data, 1),
+ BCM6368_FUN(robosw_led_clk, 1),
+ BCM6368_FUN(robosw_led0, 1),
+ BCM6368_FUN(robosw_led1, 1),
+ BCM6368_FUN(usb_device_led, 1),
+ BCM6368_FUN(pci_req1, 0),
+ BCM6368_FUN(pci_gnt1, 0),
+ BCM6368_FUN(pci_intb, 0),
+ BCM6368_FUN(pci_req0, 0),
+ BCM6368_FUN(pci_gnt0, 0),
+ BCM6368_FUN(pcmcia_cd1, 0),
+ BCM6368_FUN(pcmcia_cd2, 0),
+ BCM6368_FUN(pcmcia_vs1, 0),
+ BCM6368_FUN(pcmcia_vs2, 0),
+ BCM6368_FUN(ebi_cs2, 1),
+ BCM6368_FUN(ebi_cs3, 1),
+ BCM6368_FUN(spi_cs2, 1),
+ BCM6368_FUN(spi_cs3, 1),
+ BCM6368_FUN(spi_cs4, 1),
+ BCM6368_FUN(spi_cs5, 1),
+ BCM6368_BASEMODE_FUN(uart1, UART1, 0x6),
+};
+
+static int bcm6368_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6368_groups);
+}
+
+static const char *bcm6368_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned group)
+{
+ return bcm6368_groups[group].name;
+}
+
+static int bcm6368_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned group, const unsigned **pins,
+ unsigned *num_pins)
+{
+ *pins = bcm6368_groups[group].pins;
+ *num_pins = bcm6368_groups[group].num_pins;
+
+ return 0;
+}
+
+static int bcm6368_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6368_funcs);
+}
+
+static const char *bcm6368_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return bcm6368_funcs[selector].name;
+}
+
+static int bcm6368_pinctrl_get_groups(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ *groups = bcm6368_funcs[selector].groups;
+ *num_groups = bcm6368_funcs[selector].num_groups;
+
+ return 0;
+}
+
+static int bcm6368_pinctrl_set_mux(struct pinctrl_dev *pctldev,
+ unsigned selector, unsigned group)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ struct bcm6368_priv *priv = pc->driver_data;
+ const struct bcm6368_pingroup *pg = &bcm6368_groups[group];
+ const struct bcm6368_function *fun = &bcm6368_funcs[selector];
+ int i, pin;
+
+ if (fun->basemode) {
+ unsigned int mask = 0;
+
+ for (i = 0; i < pg->num_pins; i++) {
+ pin = pg->pins[i];
+ if (pin < BCM63XX_BANK_GPIOS)
+ mask |= BIT(pin);
+ }
+
+ regmap_update_bits(pc->regs, BCM6368_MODE_REG, mask, 0);
+ regmap_field_write(priv->overlays, fun->basemode);
+ } else {
+ pin = pg->pins[0];
+
+ if (bcm6368_pins[pin].drv_data)
+ regmap_field_write(priv->overlays,
+ BCM6368_BASEMODE_GPIO);
+
+ regmap_update_bits(pc->regs, BCM6368_MODE_REG, BIT(pin),
+ BIT(pin));
+ }
+
+ for (pin = 0; pin < pg->num_pins; pin++) {
+ struct pinctrl_gpio_range *range;
+ int hw_gpio = bcm6368_pins[pin].number;
+
+ range = pinctrl_find_gpio_range_from_pin(pctldev, hw_gpio);
+ if (range) {
+ struct gpio_chip *gc = range->gc;
+
+ if (fun->dir_out & BIT(pin))
+ gc->direction_output(gc, hw_gpio, 0);
+ else
+ gc->direction_input(gc, hw_gpio);
+ }
+ }
+
+ return 0;
+}
+
+static int bcm6368_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ struct bcm6368_priv *priv = pc->driver_data;
+
+ if (offset >= BCM63XX_BANK_GPIOS && !bcm6368_pins[offset].drv_data)
+ return 0;
+
+ /* disable all functions using this pin */
+ if (offset < BCM63XX_BANK_GPIOS)
+ regmap_update_bits(pc->regs, BCM6368_MODE_REG, BIT(offset), 0);
+
+ if (bcm6368_pins[offset].drv_data)
+ regmap_field_write(priv->overlays, BCM6368_BASEMODE_GPIO);
+
+ return 0;
+}
+
+static struct pinctrl_ops bcm6368_pctl_ops = {
+ .dt_free_map = pinctrl_utils_free_map,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .get_group_name = bcm6368_pinctrl_get_group_name,
+ .get_group_pins = bcm6368_pinctrl_get_group_pins,
+ .get_groups_count = bcm6368_pinctrl_get_group_count,
+};
+
+static struct pinmux_ops bcm6368_pmx_ops = {
+ .get_function_groups = bcm6368_pinctrl_get_groups,
+ .get_function_name = bcm6368_pinctrl_get_func_name,
+ .get_functions_count = bcm6368_pinctrl_get_func_count,
+ .gpio_request_enable = bcm6368_gpio_request_enable,
+ .set_mux = bcm6368_pinctrl_set_mux,
+ .strict = true,
+};
+
+static const struct bcm63xx_pinctrl_soc bcm6368_soc = {
+ .ngpios = BCM6368_NUM_GPIOS,
+ .npins = ARRAY_SIZE(bcm6368_pins),
+ .pctl_ops = &bcm6368_pctl_ops,
+ .pins = bcm6368_pins,
+ .pmx_ops = &bcm6368_pmx_ops,
+};
+
+static int bcm6368_pinctrl_probe(struct platform_device *pdev)
+{
+ struct reg_field overlays = REG_FIELD(BCM6368_BASEMODE_REG, 0, 15);
+ struct device *dev = &pdev->dev;
+ struct bcm63xx_pinctrl *pc;
+ struct bcm6368_priv *priv;
+ int err;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ err = bcm63xx_pinctrl_probe(pdev, &bcm6368_soc, (void *) priv);
+ if (err)
+ return err;
+
+ pc = platform_get_drvdata(pdev);
+
+ priv->overlays = devm_regmap_field_alloc(dev, pc->regs, overlays);
+ if (IS_ERR(priv->overlays))
+ return PTR_ERR(priv->overlays);
+
+ return 0;
+}
+
+static const struct of_device_id bcm6368_pinctrl_match[] = {
+ { .compatible = "brcm,bcm6368-pinctrl", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver bcm6368_pinctrl_driver = {
+ .probe = bcm6368_pinctrl_probe,
+ .driver = {
+ .name = "bcm6368-pinctrl",
+ .of_match_table = bcm6368_pinctrl_match,
+ },
+};
+
+builtin_platform_driver(bcm6368_pinctrl_driver);
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v5 12/15] dt-bindings: add BCM63268 pincontroller binding documentation
2021-03-06 15:56 ` Álvaro Fernández Rojas
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
-1 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add binding documentation for the pincontrol core found in the BCM63268
family SoCs.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: change Documentation to dt-bindings in commit title
v4: no changes
v3: add new gpio node
v2: remove interrupts
.../pinctrl/brcm,bcm63268-pinctrl.yaml | 208 ++++++++++++++++++
1 file changed, 208 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
new file mode 100644
index 000000000000..1668ab567e35
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm63268-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM63268 pin controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |+
+ The pin controller node should be the child of a syscon node.
+
+ Refer to the the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+ compatible:
+ const: brcm,bcm63268-pinctrl
+
+patternProperties:
+ '^gpio$':
+ type: object
+ properties:
+ compatible:
+ const: brcm,bcm63268-gpio
+
+ data:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the data register (in bytes).
+
+ dirout:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the dirout register (in bytes).
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ required:
+ - gpio-controller
+ - gpio-ranges
+ - '#gpio-cells'
+
+ '^.*$':
+ if:
+ type: object
+ then:
+ properties:
+ function:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ serial_led_clk, serial_led_data, hsspi_cs4, hsspi_cs5,
+ hsspi_cs6, hsspi_cs7, adsl_spi_miso, adsl_spi_mosi,
+ vreq_clk, pcie_clkreq_b, robosw_led_clk, robosw_led_data,
+ nand, gpio35_alt, dectpd, vdsl_phy_override_0,
+ vdsl_phy_override_1, vdsl_phy_override_2,
+ vdsl_phy_override_3, dsl_gpio8, dsl_gpio9 ]
+
+ pins:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ gpio0, gpio1, gpio16, gpio17, gpio8, gpio9, gpio18, gpio19,
+ gpio22, gpio23, gpio30, gpio31, nand_grp, gpio35
+ dectpd_grp, vdsl_phy_override_0_grp,
+ vdsl_phy_override_1_grp, vdsl_phy_override_2_grp,
+ vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ]
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio_cntl@100000c0 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x100000c0 0x80>;
+
+ pinctrl: pinctrl {
+ compatible = "brcm,bcm63268-pinctrl";
+
+ gpio {
+ compatible = "brcm,bcm63268-gpio";
+ data = <0xc>;
+ dirout = <0x4>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 52>;
+ #gpio-cells = <2>;
+ };
+
+ pinctrl_serial_led: serial_led {
+ pinctrl_serial_led_clk: serial_led_clk {
+ function = "serial_led_clk";
+ pins = "gpio0";
+ };
+
+ pinctrl_serial_led_data: serial_led_data {
+ function = "serial_led_data";
+ pins = "gpio1";
+ };
+ };
+
+ pinctrl_hsspi_cs4: hsspi_cs4 {
+ function = "hsspi_cs4";
+ pins = "gpio16";
+ };
+
+ pinctrl_hsspi_cs5: hsspi_cs5 {
+ function = "hsspi_cs5";
+ pins = "gpio17";
+ };
+
+ pinctrl_hsspi_cs6: hsspi_cs6 {
+ function = "hsspi_cs6";
+ pins = "gpio8";
+ };
+
+ pinctrl_hsspi_cs7: hsspi_cs7 {
+ function = "hsspi_cs7";
+ pins = "gpio9";
+ };
+
+ pinctrl_adsl_spi: adsl_spi {
+ pinctrl_adsl_spi_miso: adsl_spi_miso {
+ function = "adsl_spi_miso";
+ pins = "gpio18";
+ };
+
+ pinctrl_adsl_spi_mosi: adsl_spi_mosi {
+ function = "adsl_spi_mosi";
+ pins = "gpio19";
+ };
+ };
+
+ pinctrl_vreq_clk: vreq_clk {
+ function = "vreq_clk";
+ pins = "gpio22";
+ };
+
+ pinctrl_pcie_clkreq_b: pcie_clkreq_b {
+ function = "pcie_clkreq_b";
+ pins = "gpio23";
+ };
+
+ pinctrl_robosw_led_clk: robosw_led_clk {
+ function = "robosw_led_clk";
+ pins = "gpio30";
+ };
+
+ pinctrl_robosw_led_data: robosw_led_data {
+ function = "robosw_led_data";
+ pins = "gpio31";
+ };
+
+ pinctrl_nand: nand {
+ function = "nand";
+ group = "nand_grp";
+ };
+
+ pinctrl_gpio35_alt: gpio35_alt {
+ function = "gpio35_alt";
+ pin = "gpio35";
+ };
+
+ pinctrl_dectpd: dectpd {
+ function = "dectpd";
+ group = "dectpd_grp";
+ };
+
+ pinctrl_vdsl_phy_override_0: vdsl_phy_override_0 {
+ function = "vdsl_phy_override_0";
+ group = "vdsl_phy_override_0_grp";
+ };
+
+ pinctrl_vdsl_phy_override_1: vdsl_phy_override_1 {
+ function = "vdsl_phy_override_1";
+ group = "vdsl_phy_override_1_grp";
+ };
+
+ pinctrl_vdsl_phy_override_2: vdsl_phy_override_2 {
+ function = "vdsl_phy_override_2";
+ group = "vdsl_phy_override_2_grp";
+ };
+
+ pinctrl_vdsl_phy_override_3: vdsl_phy_override_3 {
+ function = "vdsl_phy_override_3";
+ group = "vdsl_phy_override_3_grp";
+ };
+
+ pinctrl_dsl_gpio8: dsl_gpio8 {
+ function = "dsl_gpio8";
+ group = "dsl_gpio8";
+ };
+
+ pinctrl_dsl_gpio9: dsl_gpio9 {
+ function = "dsl_gpio9";
+ group = "dsl_gpio9";
+ };
+ };
+ };
--
2.20.1
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v5 12/15] dt-bindings: add BCM63268 pincontroller binding documentation
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
0 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add binding documentation for the pincontrol core found in the BCM63268
family SoCs.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: change Documentation to dt-bindings in commit title
v4: no changes
v3: add new gpio node
v2: remove interrupts
.../pinctrl/brcm,bcm63268-pinctrl.yaml | 208 ++++++++++++++++++
1 file changed, 208 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
new file mode 100644
index 000000000000..1668ab567e35
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm63268-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM63268 pin controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |+
+ The pin controller node should be the child of a syscon node.
+
+ Refer to the the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+ compatible:
+ const: brcm,bcm63268-pinctrl
+
+patternProperties:
+ '^gpio$':
+ type: object
+ properties:
+ compatible:
+ const: brcm,bcm63268-gpio
+
+ data:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the data register (in bytes).
+
+ dirout:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the dirout register (in bytes).
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ required:
+ - gpio-controller
+ - gpio-ranges
+ - '#gpio-cells'
+
+ '^.*$':
+ if:
+ type: object
+ then:
+ properties:
+ function:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ serial_led_clk, serial_led_data, hsspi_cs4, hsspi_cs5,
+ hsspi_cs6, hsspi_cs7, adsl_spi_miso, adsl_spi_mosi,
+ vreq_clk, pcie_clkreq_b, robosw_led_clk, robosw_led_data,
+ nand, gpio35_alt, dectpd, vdsl_phy_override_0,
+ vdsl_phy_override_1, vdsl_phy_override_2,
+ vdsl_phy_override_3, dsl_gpio8, dsl_gpio9 ]
+
+ pins:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ gpio0, gpio1, gpio16, gpio17, gpio8, gpio9, gpio18, gpio19,
+ gpio22, gpio23, gpio30, gpio31, nand_grp, gpio35
+ dectpd_grp, vdsl_phy_override_0_grp,
+ vdsl_phy_override_1_grp, vdsl_phy_override_2_grp,
+ vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ]
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio_cntl@100000c0 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x100000c0 0x80>;
+
+ pinctrl: pinctrl {
+ compatible = "brcm,bcm63268-pinctrl";
+
+ gpio {
+ compatible = "brcm,bcm63268-gpio";
+ data = <0xc>;
+ dirout = <0x4>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 52>;
+ #gpio-cells = <2>;
+ };
+
+ pinctrl_serial_led: serial_led {
+ pinctrl_serial_led_clk: serial_led_clk {
+ function = "serial_led_clk";
+ pins = "gpio0";
+ };
+
+ pinctrl_serial_led_data: serial_led_data {
+ function = "serial_led_data";
+ pins = "gpio1";
+ };
+ };
+
+ pinctrl_hsspi_cs4: hsspi_cs4 {
+ function = "hsspi_cs4";
+ pins = "gpio16";
+ };
+
+ pinctrl_hsspi_cs5: hsspi_cs5 {
+ function = "hsspi_cs5";
+ pins = "gpio17";
+ };
+
+ pinctrl_hsspi_cs6: hsspi_cs6 {
+ function = "hsspi_cs6";
+ pins = "gpio8";
+ };
+
+ pinctrl_hsspi_cs7: hsspi_cs7 {
+ function = "hsspi_cs7";
+ pins = "gpio9";
+ };
+
+ pinctrl_adsl_spi: adsl_spi {
+ pinctrl_adsl_spi_miso: adsl_spi_miso {
+ function = "adsl_spi_miso";
+ pins = "gpio18";
+ };
+
+ pinctrl_adsl_spi_mosi: adsl_spi_mosi {
+ function = "adsl_spi_mosi";
+ pins = "gpio19";
+ };
+ };
+
+ pinctrl_vreq_clk: vreq_clk {
+ function = "vreq_clk";
+ pins = "gpio22";
+ };
+
+ pinctrl_pcie_clkreq_b: pcie_clkreq_b {
+ function = "pcie_clkreq_b";
+ pins = "gpio23";
+ };
+
+ pinctrl_robosw_led_clk: robosw_led_clk {
+ function = "robosw_led_clk";
+ pins = "gpio30";
+ };
+
+ pinctrl_robosw_led_data: robosw_led_data {
+ function = "robosw_led_data";
+ pins = "gpio31";
+ };
+
+ pinctrl_nand: nand {
+ function = "nand";
+ group = "nand_grp";
+ };
+
+ pinctrl_gpio35_alt: gpio35_alt {
+ function = "gpio35_alt";
+ pin = "gpio35";
+ };
+
+ pinctrl_dectpd: dectpd {
+ function = "dectpd";
+ group = "dectpd_grp";
+ };
+
+ pinctrl_vdsl_phy_override_0: vdsl_phy_override_0 {
+ function = "vdsl_phy_override_0";
+ group = "vdsl_phy_override_0_grp";
+ };
+
+ pinctrl_vdsl_phy_override_1: vdsl_phy_override_1 {
+ function = "vdsl_phy_override_1";
+ group = "vdsl_phy_override_1_grp";
+ };
+
+ pinctrl_vdsl_phy_override_2: vdsl_phy_override_2 {
+ function = "vdsl_phy_override_2";
+ group = "vdsl_phy_override_2_grp";
+ };
+
+ pinctrl_vdsl_phy_override_3: vdsl_phy_override_3 {
+ function = "vdsl_phy_override_3";
+ group = "vdsl_phy_override_3_grp";
+ };
+
+ pinctrl_dsl_gpio8: dsl_gpio8 {
+ function = "dsl_gpio8";
+ group = "dsl_gpio8";
+ };
+
+ pinctrl_dsl_gpio9: dsl_gpio9 {
+ function = "dsl_gpio9";
+ group = "dsl_gpio9";
+ };
+ };
+ };
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v5 13/15] pinctrl: add a pincontrol driver for BCM63268
2021-03-06 15:56 ` Álvaro Fernández Rojas
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
-1 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add a pincontrol driver for BCM63268. BCM63268 allows muxing GPIOs
to different functions. Depending on the mux, these are either single
pin configurations or whole pin groups.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: add changes suggested by Andy Shevchenko
v4: no changes
v3: use new shared code
v2: switch to GPIO_REGMAP
drivers/pinctrl/bcm/Kconfig | 8 +
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-bcm63268.c | 643 +++++++++++++++++++++++++
3 files changed, 652 insertions(+)
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63268.c
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index aabd4b762aed..186985846120 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -68,6 +68,14 @@ config PINCTRL_BCM6368
help
Say Y here to enable the Broadcom BCM6368 GPIO driver.
+config PINCTRL_BCM63268
+ bool "Broadcom BCM63268 GPIO driver"
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
+ select PINCTRL_BCM63XX
+ default BMIPS_GENERIC
+ help
+ Say Y here to enable the Broadcom BCM63268 GPIO driver.
+
config PINCTRL_IPROC_GPIO
bool "Broadcom iProc GPIO (with PINCONF) driver"
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index a1331bb9680e..4117847fd279 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o
+obj-$(CONFIG_PINCTRL_BCM63268) += pinctrl-bcm63268.o
obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o
obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm63268.c b/drivers/pinctrl/bcm/pinctrl-bcm63268.c
new file mode 100644
index 000000000000..d4c5fad7fb7d
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm63268.c
@@ -0,0 +1,643 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for BCM63268 GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "../pinctrl-utils.h"
+
+#include "pinctrl-bcm63xx.h"
+
+#define BCM63268_NUM_GPIOS 52
+#define BCM63268_NUM_LEDS 24
+
+#define BCM63268_LED_REG 0x10
+#define BCM63268_MODE_REG 0x18
+#define BCM63268_CTRL_REG 0x1c
+#define BCM63268_BASEMODE_REG 0x38
+#define BCM63268_BASEMODE_NAND BIT(2) /* GPIOs 2-7, 24-31 */
+#define BCM63268_BASEMODE_GPIO35 BIT(4) /* GPIO 35 */
+#define BCM63268_BASEMODE_DECTPD BIT(5) /* GPIOs 8/9 */
+#define BCM63268_BASEMODE_VDSL_PHY_0 BIT(6) /* GPIOs 10/11 */
+#define BCM63268_BASEMODE_VDSL_PHY_1 BIT(7) /* GPIOs 12/13 */
+#define BCM63268_BASEMODE_VDSL_PHY_2 BIT(8) /* GPIOs 24/25 */
+#define BCM63268_BASEMODE_VDSL_PHY_3 BIT(9) /* GPIOs 26/27 */
+
+enum bcm63268_pinctrl_reg {
+ BCM63268_LEDCTRL,
+ BCM63268_MODE,
+ BCM63268_CTRL,
+ BCM63268_BASEMODE,
+};
+
+struct bcm63268_pingroup {
+ const char *name;
+ const unsigned * const pins;
+ const unsigned num_pins;
+};
+
+struct bcm63268_function {
+ const char *name;
+ const char * const *groups;
+ const unsigned num_groups;
+
+ enum bcm63268_pinctrl_reg reg;
+ uint32_t mask;
+};
+
+#define BCM63268_PIN(a, b, basemode) \
+ { \
+ .number = a, \
+ .name = b, \
+ .drv_data = (void *)(basemode) \
+ }
+
+static const struct pinctrl_pin_desc bcm63268_pins[] = {
+ PINCTRL_PIN(0, "gpio0"),
+ PINCTRL_PIN(1, "gpio1"),
+ BCM63268_PIN(2, "gpio2", BCM63268_BASEMODE_NAND),
+ BCM63268_PIN(3, "gpio3", BCM63268_BASEMODE_NAND),
+ BCM63268_PIN(4, "gpio4", BCM63268_BASEMODE_NAND),
+ BCM63268_PIN(5, "gpio5", BCM63268_BASEMODE_NAND),
+ BCM63268_PIN(6, "gpio6", BCM63268_BASEMODE_NAND),
+ BCM63268_PIN(7, "gpio7", BCM63268_BASEMODE_NAND),
+ BCM63268_PIN(8, "gpio8", BCM63268_BASEMODE_DECTPD),
+ BCM63268_PIN(9, "gpio9", BCM63268_BASEMODE_DECTPD),
+ BCM63268_PIN(10, "gpio10", BCM63268_BASEMODE_VDSL_PHY_0),
+ BCM63268_PIN(11, "gpio11", BCM63268_BASEMODE_VDSL_PHY_0),
+ BCM63268_PIN(12, "gpio12", BCM63268_BASEMODE_VDSL_PHY_1),
+ BCM63268_PIN(13, "gpio13", BCM63268_BASEMODE_VDSL_PHY_1),
+ PINCTRL_PIN(14, "gpio14"),
+ PINCTRL_PIN(15, "gpio15"),
+ PINCTRL_PIN(16, "gpio16"),
+ PINCTRL_PIN(17, "gpio17"),
+ PINCTRL_PIN(18, "gpio18"),
+ PINCTRL_PIN(19, "gpio19"),
+ PINCTRL_PIN(20, "gpio20"),
+ PINCTRL_PIN(21, "gpio21"),
+ PINCTRL_PIN(22, "gpio22"),
+ PINCTRL_PIN(23, "gpio23"),
+ BCM63268_PIN(24, "gpio24",
+ BCM63268_BASEMODE_NAND | BCM63268_BASEMODE_VDSL_PHY_2),
+ BCM63268_PIN(25, "gpio25",
+ BCM63268_BASEMODE_NAND | BCM63268_BASEMODE_VDSL_PHY_2),
+ BCM63268_PIN(26, "gpio26",
+ BCM63268_BASEMODE_NAND | BCM63268_BASEMODE_VDSL_PHY_3),
+ BCM63268_PIN(27, "gpio27",
+ BCM63268_BASEMODE_NAND | BCM63268_BASEMODE_VDSL_PHY_3),
+ BCM63268_PIN(28, "gpio28", BCM63268_BASEMODE_NAND),
+ BCM63268_PIN(29, "gpio29", BCM63268_BASEMODE_NAND),
+ BCM63268_PIN(30, "gpio30", BCM63268_BASEMODE_NAND),
+ BCM63268_PIN(31, "gpio31", BCM63268_BASEMODE_NAND),
+ PINCTRL_PIN(32, "gpio32"),
+ PINCTRL_PIN(33, "gpio33"),
+ PINCTRL_PIN(34, "gpio34"),
+ PINCTRL_PIN(35, "gpio35"),
+ PINCTRL_PIN(36, "gpio36"),
+ PINCTRL_PIN(37, "gpio37"),
+ PINCTRL_PIN(38, "gpio38"),
+ PINCTRL_PIN(39, "gpio39"),
+ PINCTRL_PIN(40, "gpio40"),
+ PINCTRL_PIN(41, "gpio41"),
+ PINCTRL_PIN(42, "gpio42"),
+ PINCTRL_PIN(43, "gpio43"),
+ PINCTRL_PIN(44, "gpio44"),
+ PINCTRL_PIN(45, "gpio45"),
+ PINCTRL_PIN(46, "gpio46"),
+ PINCTRL_PIN(47, "gpio47"),
+ PINCTRL_PIN(48, "gpio48"),
+ PINCTRL_PIN(49, "gpio49"),
+ PINCTRL_PIN(50, "gpio50"),
+ PINCTRL_PIN(51, "gpio51"),
+};
+
+static unsigned gpio0_pins[] = { 0 };
+static unsigned gpio1_pins[] = { 1 };
+static unsigned gpio2_pins[] = { 2 };
+static unsigned gpio3_pins[] = { 3 };
+static unsigned gpio4_pins[] = { 4 };
+static unsigned gpio5_pins[] = { 5 };
+static unsigned gpio6_pins[] = { 6 };
+static unsigned gpio7_pins[] = { 7 };
+static unsigned gpio8_pins[] = { 8 };
+static unsigned gpio9_pins[] = { 9 };
+static unsigned gpio10_pins[] = { 10 };
+static unsigned gpio11_pins[] = { 11 };
+static unsigned gpio12_pins[] = { 12 };
+static unsigned gpio13_pins[] = { 13 };
+static unsigned gpio14_pins[] = { 14 };
+static unsigned gpio15_pins[] = { 15 };
+static unsigned gpio16_pins[] = { 16 };
+static unsigned gpio17_pins[] = { 17 };
+static unsigned gpio18_pins[] = { 18 };
+static unsigned gpio19_pins[] = { 19 };
+static unsigned gpio20_pins[] = { 20 };
+static unsigned gpio21_pins[] = { 21 };
+static unsigned gpio22_pins[] = { 22 };
+static unsigned gpio23_pins[] = { 23 };
+static unsigned gpio24_pins[] = { 24 };
+static unsigned gpio25_pins[] = { 25 };
+static unsigned gpio26_pins[] = { 26 };
+static unsigned gpio27_pins[] = { 27 };
+static unsigned gpio28_pins[] = { 28 };
+static unsigned gpio29_pins[] = { 29 };
+static unsigned gpio30_pins[] = { 30 };
+static unsigned gpio31_pins[] = { 31 };
+static unsigned gpio32_pins[] = { 32 };
+static unsigned gpio33_pins[] = { 33 };
+static unsigned gpio34_pins[] = { 34 };
+static unsigned gpio35_pins[] = { 35 };
+static unsigned gpio36_pins[] = { 36 };
+static unsigned gpio37_pins[] = { 37 };
+static unsigned gpio38_pins[] = { 38 };
+static unsigned gpio39_pins[] = { 39 };
+static unsigned gpio40_pins[] = { 40 };
+static unsigned gpio41_pins[] = { 41 };
+static unsigned gpio42_pins[] = { 42 };
+static unsigned gpio43_pins[] = { 43 };
+static unsigned gpio44_pins[] = { 44 };
+static unsigned gpio45_pins[] = { 45 };
+static unsigned gpio46_pins[] = { 46 };
+static unsigned gpio47_pins[] = { 47 };
+static unsigned gpio48_pins[] = { 48 };
+static unsigned gpio49_pins[] = { 49 };
+static unsigned gpio50_pins[] = { 50 };
+static unsigned gpio51_pins[] = { 51 };
+
+static unsigned nand_grp_pins[] = {
+ 2, 3, 4, 5, 6, 7, 24,
+ 25, 26, 27, 28, 29, 30, 31,
+};
+
+static unsigned dectpd_grp_pins[] = { 8, 9 };
+static unsigned vdsl_phy0_grp_pins[] = { 10, 11 };
+static unsigned vdsl_phy1_grp_pins[] = { 12, 13 };
+static unsigned vdsl_phy2_grp_pins[] = { 24, 25 };
+static unsigned vdsl_phy3_grp_pins[] = { 26, 27 };
+
+#define BCM63268_GROUP(n) \
+ { \
+ .name = #n, \
+ .pins = n##_pins, \
+ .num_pins = ARRAY_SIZE(n##_pins), \
+ }
+
+static struct bcm63268_pingroup bcm63268_groups[] = {
+ BCM63268_GROUP(gpio0),
+ BCM63268_GROUP(gpio1),
+ BCM63268_GROUP(gpio2),
+ BCM63268_GROUP(gpio3),
+ BCM63268_GROUP(gpio4),
+ BCM63268_GROUP(gpio5),
+ BCM63268_GROUP(gpio6),
+ BCM63268_GROUP(gpio7),
+ BCM63268_GROUP(gpio8),
+ BCM63268_GROUP(gpio9),
+ BCM63268_GROUP(gpio10),
+ BCM63268_GROUP(gpio11),
+ BCM63268_GROUP(gpio12),
+ BCM63268_GROUP(gpio13),
+ BCM63268_GROUP(gpio14),
+ BCM63268_GROUP(gpio15),
+ BCM63268_GROUP(gpio16),
+ BCM63268_GROUP(gpio17),
+ BCM63268_GROUP(gpio18),
+ BCM63268_GROUP(gpio19),
+ BCM63268_GROUP(gpio20),
+ BCM63268_GROUP(gpio21),
+ BCM63268_GROUP(gpio22),
+ BCM63268_GROUP(gpio23),
+ BCM63268_GROUP(gpio24),
+ BCM63268_GROUP(gpio25),
+ BCM63268_GROUP(gpio26),
+ BCM63268_GROUP(gpio27),
+ BCM63268_GROUP(gpio28),
+ BCM63268_GROUP(gpio29),
+ BCM63268_GROUP(gpio30),
+ BCM63268_GROUP(gpio31),
+ BCM63268_GROUP(gpio32),
+ BCM63268_GROUP(gpio33),
+ BCM63268_GROUP(gpio34),
+ BCM63268_GROUP(gpio35),
+ BCM63268_GROUP(gpio36),
+ BCM63268_GROUP(gpio37),
+ BCM63268_GROUP(gpio38),
+ BCM63268_GROUP(gpio39),
+ BCM63268_GROUP(gpio40),
+ BCM63268_GROUP(gpio41),
+ BCM63268_GROUP(gpio42),
+ BCM63268_GROUP(gpio43),
+ BCM63268_GROUP(gpio44),
+ BCM63268_GROUP(gpio45),
+ BCM63268_GROUP(gpio46),
+ BCM63268_GROUP(gpio47),
+ BCM63268_GROUP(gpio48),
+ BCM63268_GROUP(gpio49),
+ BCM63268_GROUP(gpio50),
+ BCM63268_GROUP(gpio51),
+
+ /* multi pin groups */
+ BCM63268_GROUP(nand_grp),
+ BCM63268_GROUP(dectpd_grp),
+ BCM63268_GROUP(vdsl_phy0_grp),
+ BCM63268_GROUP(vdsl_phy1_grp),
+ BCM63268_GROUP(vdsl_phy2_grp),
+ BCM63268_GROUP(vdsl_phy3_grp),
+};
+
+static const char * const led_groups[] = {
+ "gpio0",
+ "gpio1",
+ "gpio2",
+ "gpio3",
+ "gpio4",
+ "gpio5",
+ "gpio6",
+ "gpio7",
+ "gpio8",
+ "gpio9",
+ "gpio10",
+ "gpio11",
+ "gpio12",
+ "gpio13",
+ "gpio14",
+ "gpio15",
+ "gpio16",
+ "gpio17",
+ "gpio18",
+ "gpio19",
+ "gpio20",
+ "gpio21",
+ "gpio22",
+ "gpio23",
+};
+
+static const char * const serial_led_clk_groups[] = {
+ "gpio0",
+};
+
+static const char * const serial_led_data_groups[] = {
+ "gpio1",
+};
+
+static const char * const hsspi_cs4_groups[] = {
+ "gpio16",
+};
+
+static const char * const hsspi_cs5_groups[] = {
+ "gpio17",
+};
+
+static const char * const hsspi_cs6_groups[] = {
+ "gpio8",
+};
+
+static const char * const hsspi_cs7_groups[] = {
+ "gpio9",
+};
+
+static const char * const uart1_scts_groups[] = {
+ "gpio10",
+ "gpio24",
+};
+
+static const char * const uart1_srts_groups[] = {
+ "gpio11",
+ "gpio25",
+};
+
+static const char * const uart1_sdin_groups[] = {
+ "gpio12",
+ "gpio26",
+};
+
+static const char * const uart1_sdout_groups[] = {
+ "gpio13",
+ "gpio27",
+};
+
+static const char * const ntr_pulse_in_groups[] = {
+ "gpio14",
+ "gpio28",
+};
+
+static const char * const dsl_ntr_pulse_out_groups[] = {
+ "gpio15",
+ "gpio29",
+};
+
+static const char * const adsl_spi_miso_groups[] = {
+ "gpio18",
+};
+
+static const char * const adsl_spi_mosi_groups[] = {
+ "gpio19",
+};
+
+static const char * const vreg_clk_groups[] = {
+ "gpio22",
+};
+
+static const char * const pcie_clkreq_b_groups[] = {
+ "gpio23",
+};
+
+static const char * const switch_led_clk_groups[] = {
+ "gpio30",
+};
+
+static const char * const switch_led_data_groups[] = {
+ "gpio31",
+};
+
+static const char * const wifi_groups[] = {
+ "gpio32",
+ "gpio33",
+ "gpio34",
+ "gpio35",
+ "gpio36",
+ "gpio37",
+ "gpio38",
+ "gpio39",
+ "gpio40",
+ "gpio41",
+ "gpio42",
+ "gpio43",
+ "gpio44",
+ "gpio45",
+ "gpio46",
+ "gpio47",
+ "gpio48",
+ "gpio49",
+ "gpio50",
+ "gpio51",
+};
+
+static const char * const nand_groups[] = {
+ "nand_grp",
+};
+
+static const char * const dectpd_groups[] = {
+ "dectpd_grp",
+};
+
+static const char * const vdsl_phy_override_0_groups[] = {
+ "vdsl_phy_override_0_grp",
+};
+
+static const char * const vdsl_phy_override_1_groups[] = {
+ "vdsl_phy_override_1_grp",
+};
+
+static const char * const vdsl_phy_override_2_groups[] = {
+ "vdsl_phy_override_2_grp",
+};
+
+static const char * const vdsl_phy_override_3_groups[] = {
+ "vdsl_phy_override_3_grp",
+};
+
+#define BCM63268_LED_FUN(n) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .reg = BCM63268_LEDCTRL, \
+ }
+
+#define BCM63268_MODE_FUN(n) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .reg = BCM63268_MODE, \
+ }
+
+#define BCM63268_CTRL_FUN(n) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .reg = BCM63268_CTRL, \
+ }
+
+#define BCM63268_BASEMODE_FUN(n, val) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .reg = BCM63268_BASEMODE, \
+ .mask = val, \
+ }
+
+static const struct bcm63268_function bcm63268_funcs[] = {
+ BCM63268_LED_FUN(led),
+ BCM63268_MODE_FUN(serial_led_clk),
+ BCM63268_MODE_FUN(serial_led_data),
+ BCM63268_MODE_FUN(hsspi_cs6),
+ BCM63268_MODE_FUN(hsspi_cs7),
+ BCM63268_MODE_FUN(uart1_scts),
+ BCM63268_MODE_FUN(uart1_srts),
+ BCM63268_MODE_FUN(uart1_sdin),
+ BCM63268_MODE_FUN(uart1_sdout),
+ BCM63268_MODE_FUN(ntr_pulse_in),
+ BCM63268_MODE_FUN(dsl_ntr_pulse_out),
+ BCM63268_MODE_FUN(hsspi_cs4),
+ BCM63268_MODE_FUN(hsspi_cs5),
+ BCM63268_MODE_FUN(adsl_spi_miso),
+ BCM63268_MODE_FUN(adsl_spi_mosi),
+ BCM63268_MODE_FUN(vreg_clk),
+ BCM63268_MODE_FUN(pcie_clkreq_b),
+ BCM63268_MODE_FUN(switch_led_clk),
+ BCM63268_MODE_FUN(switch_led_data),
+ BCM63268_CTRL_FUN(wifi),
+ BCM63268_BASEMODE_FUN(nand, BCM63268_BASEMODE_NAND),
+ BCM63268_BASEMODE_FUN(dectpd, BCM63268_BASEMODE_DECTPD),
+ BCM63268_BASEMODE_FUN(vdsl_phy_override_0,
+ BCM63268_BASEMODE_VDSL_PHY_0),
+ BCM63268_BASEMODE_FUN(vdsl_phy_override_1,
+ BCM63268_BASEMODE_VDSL_PHY_1),
+ BCM63268_BASEMODE_FUN(vdsl_phy_override_2,
+ BCM63268_BASEMODE_VDSL_PHY_2),
+ BCM63268_BASEMODE_FUN(vdsl_phy_override_3,
+ BCM63268_BASEMODE_VDSL_PHY_3),
+};
+
+static int bcm63268_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm63268_groups);
+}
+
+static const char *bcm63268_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned group)
+{
+ return bcm63268_groups[group].name;
+}
+
+static int bcm63268_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned group,
+ const unsigned **pins,
+ unsigned *num_pins)
+{
+ *pins = bcm63268_groups[group].pins;
+ *num_pins = bcm63268_groups[group].num_pins;
+
+ return 0;
+}
+
+static int bcm63268_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm63268_funcs);
+}
+
+static const char *bcm63268_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return bcm63268_funcs[selector].name;
+}
+
+static int bcm63268_pinctrl_get_groups(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ *groups = bcm63268_funcs[selector].groups;
+ *num_groups = bcm63268_funcs[selector].num_groups;
+
+ return 0;
+}
+
+static void bcm63268_set_gpio(struct bcm63xx_pinctrl *pc, unsigned pin)
+{
+ const struct pinctrl_pin_desc *desc = &bcm63268_pins[pin];
+ unsigned int basemode = (unsigned long) desc->drv_data;
+ unsigned int mask = BIT(bcm63xx_bank_pin(pin));
+
+ if (basemode)
+ regmap_update_bits(pc->regs, BCM63268_BASEMODE_REG, basemode,
+ 0);
+
+ if (pin < BCM63XX_BANK_GPIOS) {
+ /* base mode: 0 => gpio, 1 => mux function */
+ regmap_update_bits(pc->regs, BCM63268_MODE_REG, mask, 0);
+
+ /* pins 0-23 might be muxed to led */
+ if (pin < BCM63268_NUM_LEDS)
+ regmap_update_bits(pc->regs, BCM63268_LED_REG, mask,
+ 0);
+ } else if (pin < BCM63268_NUM_GPIOS) {
+ /* ctrl reg: 0 => wifi function, 1 => gpio */
+ regmap_update_bits(pc->regs, BCM63268_CTRL_REG, mask, mask);
+ }
+}
+
+static int bcm63268_pinctrl_set_mux(struct pinctrl_dev *pctldev,
+ unsigned selector, unsigned group)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ const struct bcm63268_pingroup *pg = &bcm63268_groups[group];
+ const struct bcm63268_function *f = &bcm63268_funcs[selector];
+ unsigned i;
+ unsigned int reg;
+ unsigned int val, mask;
+
+ for (i = 0; i < pg->num_pins; i++)
+ bcm63268_set_gpio(pc, pg->pins[i]);
+
+ switch (f->reg) {
+ case BCM63268_LEDCTRL:
+ reg = BCM63268_LED_REG;
+ mask = BIT(pg->pins[0]);
+ val = BIT(pg->pins[0]);
+ break;
+ case BCM63268_MODE:
+ reg = BCM63268_MODE_REG;
+ mask = BIT(pg->pins[0]);
+ val = BIT(pg->pins[0]);
+ break;
+ case BCM63268_CTRL:
+ reg = BCM63268_CTRL_REG;
+ mask = BIT(pg->pins[0]);
+ val = 0;
+ break;
+ case BCM63268_BASEMODE:
+ reg = BCM63268_BASEMODE_REG;
+ mask = f->mask;
+ val = f->mask;
+ break;
+ default:
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ regmap_update_bits(pc->regs, reg, mask, val);
+
+ return 0;
+}
+
+static int bcm63268_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+
+ /* disable all functions using this pin */
+ bcm63268_set_gpio(pc, offset);
+
+ return 0;
+}
+
+static struct pinctrl_ops bcm63268_pctl_ops = {
+ .dt_free_map = pinctrl_utils_free_map,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .get_group_name = bcm63268_pinctrl_get_group_name,
+ .get_group_pins = bcm63268_pinctrl_get_group_pins,
+ .get_groups_count = bcm63268_pinctrl_get_group_count,
+};
+
+static struct pinmux_ops bcm63268_pmx_ops = {
+ .get_function_groups = bcm63268_pinctrl_get_groups,
+ .get_function_name = bcm63268_pinctrl_get_func_name,
+ .get_functions_count = bcm63268_pinctrl_get_func_count,
+ .gpio_request_enable = bcm63268_gpio_request_enable,
+ .set_mux = bcm63268_pinctrl_set_mux,
+ .strict = true,
+};
+
+static const struct bcm63xx_pinctrl_soc bcm63268_soc = {
+ .ngpios = BCM63268_NUM_GPIOS,
+ .npins = ARRAY_SIZE(bcm63268_pins),
+ .pctl_ops = &bcm63268_pctl_ops,
+ .pins = bcm63268_pins,
+ .pmx_ops = &bcm63268_pmx_ops,
+};
+
+static int bcm63268_pinctrl_probe(struct platform_device *pdev)
+{
+ return bcm63xx_pinctrl_probe(pdev, &bcm63268_soc, NULL);
+}
+
+static const struct of_device_id bcm63268_pinctrl_match[] = {
+ { .compatible = "brcm,bcm63268-pinctrl", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver bcm63268_pinctrl_driver = {
+ .probe = bcm63268_pinctrl_probe,
+ .driver = {
+ .name = "bcm63268-pinctrl",
+ .of_match_table = bcm63268_pinctrl_match,
+ },
+};
+
+builtin_platform_driver(bcm63268_pinctrl_driver);
--
2.20.1
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v5 13/15] pinctrl: add a pincontrol driver for BCM63268
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
0 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add a pincontrol driver for BCM63268. BCM63268 allows muxing GPIOs
to different functions. Depending on the mux, these are either single
pin configurations or whole pin groups.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: add changes suggested by Andy Shevchenko
v4: no changes
v3: use new shared code
v2: switch to GPIO_REGMAP
drivers/pinctrl/bcm/Kconfig | 8 +
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-bcm63268.c | 643 +++++++++++++++++++++++++
3 files changed, 652 insertions(+)
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63268.c
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index aabd4b762aed..186985846120 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -68,6 +68,14 @@ config PINCTRL_BCM6368
help
Say Y here to enable the Broadcom BCM6368 GPIO driver.
+config PINCTRL_BCM63268
+ bool "Broadcom BCM63268 GPIO driver"
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
+ select PINCTRL_BCM63XX
+ default BMIPS_GENERIC
+ help
+ Say Y here to enable the Broadcom BCM63268 GPIO driver.
+
config PINCTRL_IPROC_GPIO
bool "Broadcom iProc GPIO (with PINCONF) driver"
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index a1331bb9680e..4117847fd279 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o
+obj-$(CONFIG_PINCTRL_BCM63268) += pinctrl-bcm63268.o
obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o
obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm63268.c b/drivers/pinctrl/bcm/pinctrl-bcm63268.c
new file mode 100644
index 000000000000..d4c5fad7fb7d
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm63268.c
@@ -0,0 +1,643 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for BCM63268 GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "../pinctrl-utils.h"
+
+#include "pinctrl-bcm63xx.h"
+
+#define BCM63268_NUM_GPIOS 52
+#define BCM63268_NUM_LEDS 24
+
+#define BCM63268_LED_REG 0x10
+#define BCM63268_MODE_REG 0x18
+#define BCM63268_CTRL_REG 0x1c
+#define BCM63268_BASEMODE_REG 0x38
+#define BCM63268_BASEMODE_NAND BIT(2) /* GPIOs 2-7, 24-31 */
+#define BCM63268_BASEMODE_GPIO35 BIT(4) /* GPIO 35 */
+#define BCM63268_BASEMODE_DECTPD BIT(5) /* GPIOs 8/9 */
+#define BCM63268_BASEMODE_VDSL_PHY_0 BIT(6) /* GPIOs 10/11 */
+#define BCM63268_BASEMODE_VDSL_PHY_1 BIT(7) /* GPIOs 12/13 */
+#define BCM63268_BASEMODE_VDSL_PHY_2 BIT(8) /* GPIOs 24/25 */
+#define BCM63268_BASEMODE_VDSL_PHY_3 BIT(9) /* GPIOs 26/27 */
+
+enum bcm63268_pinctrl_reg {
+ BCM63268_LEDCTRL,
+ BCM63268_MODE,
+ BCM63268_CTRL,
+ BCM63268_BASEMODE,
+};
+
+struct bcm63268_pingroup {
+ const char *name;
+ const unsigned * const pins;
+ const unsigned num_pins;
+};
+
+struct bcm63268_function {
+ const char *name;
+ const char * const *groups;
+ const unsigned num_groups;
+
+ enum bcm63268_pinctrl_reg reg;
+ uint32_t mask;
+};
+
+#define BCM63268_PIN(a, b, basemode) \
+ { \
+ .number = a, \
+ .name = b, \
+ .drv_data = (void *)(basemode) \
+ }
+
+static const struct pinctrl_pin_desc bcm63268_pins[] = {
+ PINCTRL_PIN(0, "gpio0"),
+ PINCTRL_PIN(1, "gpio1"),
+ BCM63268_PIN(2, "gpio2", BCM63268_BASEMODE_NAND),
+ BCM63268_PIN(3, "gpio3", BCM63268_BASEMODE_NAND),
+ BCM63268_PIN(4, "gpio4", BCM63268_BASEMODE_NAND),
+ BCM63268_PIN(5, "gpio5", BCM63268_BASEMODE_NAND),
+ BCM63268_PIN(6, "gpio6", BCM63268_BASEMODE_NAND),
+ BCM63268_PIN(7, "gpio7", BCM63268_BASEMODE_NAND),
+ BCM63268_PIN(8, "gpio8", BCM63268_BASEMODE_DECTPD),
+ BCM63268_PIN(9, "gpio9", BCM63268_BASEMODE_DECTPD),
+ BCM63268_PIN(10, "gpio10", BCM63268_BASEMODE_VDSL_PHY_0),
+ BCM63268_PIN(11, "gpio11", BCM63268_BASEMODE_VDSL_PHY_0),
+ BCM63268_PIN(12, "gpio12", BCM63268_BASEMODE_VDSL_PHY_1),
+ BCM63268_PIN(13, "gpio13", BCM63268_BASEMODE_VDSL_PHY_1),
+ PINCTRL_PIN(14, "gpio14"),
+ PINCTRL_PIN(15, "gpio15"),
+ PINCTRL_PIN(16, "gpio16"),
+ PINCTRL_PIN(17, "gpio17"),
+ PINCTRL_PIN(18, "gpio18"),
+ PINCTRL_PIN(19, "gpio19"),
+ PINCTRL_PIN(20, "gpio20"),
+ PINCTRL_PIN(21, "gpio21"),
+ PINCTRL_PIN(22, "gpio22"),
+ PINCTRL_PIN(23, "gpio23"),
+ BCM63268_PIN(24, "gpio24",
+ BCM63268_BASEMODE_NAND | BCM63268_BASEMODE_VDSL_PHY_2),
+ BCM63268_PIN(25, "gpio25",
+ BCM63268_BASEMODE_NAND | BCM63268_BASEMODE_VDSL_PHY_2),
+ BCM63268_PIN(26, "gpio26",
+ BCM63268_BASEMODE_NAND | BCM63268_BASEMODE_VDSL_PHY_3),
+ BCM63268_PIN(27, "gpio27",
+ BCM63268_BASEMODE_NAND | BCM63268_BASEMODE_VDSL_PHY_3),
+ BCM63268_PIN(28, "gpio28", BCM63268_BASEMODE_NAND),
+ BCM63268_PIN(29, "gpio29", BCM63268_BASEMODE_NAND),
+ BCM63268_PIN(30, "gpio30", BCM63268_BASEMODE_NAND),
+ BCM63268_PIN(31, "gpio31", BCM63268_BASEMODE_NAND),
+ PINCTRL_PIN(32, "gpio32"),
+ PINCTRL_PIN(33, "gpio33"),
+ PINCTRL_PIN(34, "gpio34"),
+ PINCTRL_PIN(35, "gpio35"),
+ PINCTRL_PIN(36, "gpio36"),
+ PINCTRL_PIN(37, "gpio37"),
+ PINCTRL_PIN(38, "gpio38"),
+ PINCTRL_PIN(39, "gpio39"),
+ PINCTRL_PIN(40, "gpio40"),
+ PINCTRL_PIN(41, "gpio41"),
+ PINCTRL_PIN(42, "gpio42"),
+ PINCTRL_PIN(43, "gpio43"),
+ PINCTRL_PIN(44, "gpio44"),
+ PINCTRL_PIN(45, "gpio45"),
+ PINCTRL_PIN(46, "gpio46"),
+ PINCTRL_PIN(47, "gpio47"),
+ PINCTRL_PIN(48, "gpio48"),
+ PINCTRL_PIN(49, "gpio49"),
+ PINCTRL_PIN(50, "gpio50"),
+ PINCTRL_PIN(51, "gpio51"),
+};
+
+static unsigned gpio0_pins[] = { 0 };
+static unsigned gpio1_pins[] = { 1 };
+static unsigned gpio2_pins[] = { 2 };
+static unsigned gpio3_pins[] = { 3 };
+static unsigned gpio4_pins[] = { 4 };
+static unsigned gpio5_pins[] = { 5 };
+static unsigned gpio6_pins[] = { 6 };
+static unsigned gpio7_pins[] = { 7 };
+static unsigned gpio8_pins[] = { 8 };
+static unsigned gpio9_pins[] = { 9 };
+static unsigned gpio10_pins[] = { 10 };
+static unsigned gpio11_pins[] = { 11 };
+static unsigned gpio12_pins[] = { 12 };
+static unsigned gpio13_pins[] = { 13 };
+static unsigned gpio14_pins[] = { 14 };
+static unsigned gpio15_pins[] = { 15 };
+static unsigned gpio16_pins[] = { 16 };
+static unsigned gpio17_pins[] = { 17 };
+static unsigned gpio18_pins[] = { 18 };
+static unsigned gpio19_pins[] = { 19 };
+static unsigned gpio20_pins[] = { 20 };
+static unsigned gpio21_pins[] = { 21 };
+static unsigned gpio22_pins[] = { 22 };
+static unsigned gpio23_pins[] = { 23 };
+static unsigned gpio24_pins[] = { 24 };
+static unsigned gpio25_pins[] = { 25 };
+static unsigned gpio26_pins[] = { 26 };
+static unsigned gpio27_pins[] = { 27 };
+static unsigned gpio28_pins[] = { 28 };
+static unsigned gpio29_pins[] = { 29 };
+static unsigned gpio30_pins[] = { 30 };
+static unsigned gpio31_pins[] = { 31 };
+static unsigned gpio32_pins[] = { 32 };
+static unsigned gpio33_pins[] = { 33 };
+static unsigned gpio34_pins[] = { 34 };
+static unsigned gpio35_pins[] = { 35 };
+static unsigned gpio36_pins[] = { 36 };
+static unsigned gpio37_pins[] = { 37 };
+static unsigned gpio38_pins[] = { 38 };
+static unsigned gpio39_pins[] = { 39 };
+static unsigned gpio40_pins[] = { 40 };
+static unsigned gpio41_pins[] = { 41 };
+static unsigned gpio42_pins[] = { 42 };
+static unsigned gpio43_pins[] = { 43 };
+static unsigned gpio44_pins[] = { 44 };
+static unsigned gpio45_pins[] = { 45 };
+static unsigned gpio46_pins[] = { 46 };
+static unsigned gpio47_pins[] = { 47 };
+static unsigned gpio48_pins[] = { 48 };
+static unsigned gpio49_pins[] = { 49 };
+static unsigned gpio50_pins[] = { 50 };
+static unsigned gpio51_pins[] = { 51 };
+
+static unsigned nand_grp_pins[] = {
+ 2, 3, 4, 5, 6, 7, 24,
+ 25, 26, 27, 28, 29, 30, 31,
+};
+
+static unsigned dectpd_grp_pins[] = { 8, 9 };
+static unsigned vdsl_phy0_grp_pins[] = { 10, 11 };
+static unsigned vdsl_phy1_grp_pins[] = { 12, 13 };
+static unsigned vdsl_phy2_grp_pins[] = { 24, 25 };
+static unsigned vdsl_phy3_grp_pins[] = { 26, 27 };
+
+#define BCM63268_GROUP(n) \
+ { \
+ .name = #n, \
+ .pins = n##_pins, \
+ .num_pins = ARRAY_SIZE(n##_pins), \
+ }
+
+static struct bcm63268_pingroup bcm63268_groups[] = {
+ BCM63268_GROUP(gpio0),
+ BCM63268_GROUP(gpio1),
+ BCM63268_GROUP(gpio2),
+ BCM63268_GROUP(gpio3),
+ BCM63268_GROUP(gpio4),
+ BCM63268_GROUP(gpio5),
+ BCM63268_GROUP(gpio6),
+ BCM63268_GROUP(gpio7),
+ BCM63268_GROUP(gpio8),
+ BCM63268_GROUP(gpio9),
+ BCM63268_GROUP(gpio10),
+ BCM63268_GROUP(gpio11),
+ BCM63268_GROUP(gpio12),
+ BCM63268_GROUP(gpio13),
+ BCM63268_GROUP(gpio14),
+ BCM63268_GROUP(gpio15),
+ BCM63268_GROUP(gpio16),
+ BCM63268_GROUP(gpio17),
+ BCM63268_GROUP(gpio18),
+ BCM63268_GROUP(gpio19),
+ BCM63268_GROUP(gpio20),
+ BCM63268_GROUP(gpio21),
+ BCM63268_GROUP(gpio22),
+ BCM63268_GROUP(gpio23),
+ BCM63268_GROUP(gpio24),
+ BCM63268_GROUP(gpio25),
+ BCM63268_GROUP(gpio26),
+ BCM63268_GROUP(gpio27),
+ BCM63268_GROUP(gpio28),
+ BCM63268_GROUP(gpio29),
+ BCM63268_GROUP(gpio30),
+ BCM63268_GROUP(gpio31),
+ BCM63268_GROUP(gpio32),
+ BCM63268_GROUP(gpio33),
+ BCM63268_GROUP(gpio34),
+ BCM63268_GROUP(gpio35),
+ BCM63268_GROUP(gpio36),
+ BCM63268_GROUP(gpio37),
+ BCM63268_GROUP(gpio38),
+ BCM63268_GROUP(gpio39),
+ BCM63268_GROUP(gpio40),
+ BCM63268_GROUP(gpio41),
+ BCM63268_GROUP(gpio42),
+ BCM63268_GROUP(gpio43),
+ BCM63268_GROUP(gpio44),
+ BCM63268_GROUP(gpio45),
+ BCM63268_GROUP(gpio46),
+ BCM63268_GROUP(gpio47),
+ BCM63268_GROUP(gpio48),
+ BCM63268_GROUP(gpio49),
+ BCM63268_GROUP(gpio50),
+ BCM63268_GROUP(gpio51),
+
+ /* multi pin groups */
+ BCM63268_GROUP(nand_grp),
+ BCM63268_GROUP(dectpd_grp),
+ BCM63268_GROUP(vdsl_phy0_grp),
+ BCM63268_GROUP(vdsl_phy1_grp),
+ BCM63268_GROUP(vdsl_phy2_grp),
+ BCM63268_GROUP(vdsl_phy3_grp),
+};
+
+static const char * const led_groups[] = {
+ "gpio0",
+ "gpio1",
+ "gpio2",
+ "gpio3",
+ "gpio4",
+ "gpio5",
+ "gpio6",
+ "gpio7",
+ "gpio8",
+ "gpio9",
+ "gpio10",
+ "gpio11",
+ "gpio12",
+ "gpio13",
+ "gpio14",
+ "gpio15",
+ "gpio16",
+ "gpio17",
+ "gpio18",
+ "gpio19",
+ "gpio20",
+ "gpio21",
+ "gpio22",
+ "gpio23",
+};
+
+static const char * const serial_led_clk_groups[] = {
+ "gpio0",
+};
+
+static const char * const serial_led_data_groups[] = {
+ "gpio1",
+};
+
+static const char * const hsspi_cs4_groups[] = {
+ "gpio16",
+};
+
+static const char * const hsspi_cs5_groups[] = {
+ "gpio17",
+};
+
+static const char * const hsspi_cs6_groups[] = {
+ "gpio8",
+};
+
+static const char * const hsspi_cs7_groups[] = {
+ "gpio9",
+};
+
+static const char * const uart1_scts_groups[] = {
+ "gpio10",
+ "gpio24",
+};
+
+static const char * const uart1_srts_groups[] = {
+ "gpio11",
+ "gpio25",
+};
+
+static const char * const uart1_sdin_groups[] = {
+ "gpio12",
+ "gpio26",
+};
+
+static const char * const uart1_sdout_groups[] = {
+ "gpio13",
+ "gpio27",
+};
+
+static const char * const ntr_pulse_in_groups[] = {
+ "gpio14",
+ "gpio28",
+};
+
+static const char * const dsl_ntr_pulse_out_groups[] = {
+ "gpio15",
+ "gpio29",
+};
+
+static const char * const adsl_spi_miso_groups[] = {
+ "gpio18",
+};
+
+static const char * const adsl_spi_mosi_groups[] = {
+ "gpio19",
+};
+
+static const char * const vreg_clk_groups[] = {
+ "gpio22",
+};
+
+static const char * const pcie_clkreq_b_groups[] = {
+ "gpio23",
+};
+
+static const char * const switch_led_clk_groups[] = {
+ "gpio30",
+};
+
+static const char * const switch_led_data_groups[] = {
+ "gpio31",
+};
+
+static const char * const wifi_groups[] = {
+ "gpio32",
+ "gpio33",
+ "gpio34",
+ "gpio35",
+ "gpio36",
+ "gpio37",
+ "gpio38",
+ "gpio39",
+ "gpio40",
+ "gpio41",
+ "gpio42",
+ "gpio43",
+ "gpio44",
+ "gpio45",
+ "gpio46",
+ "gpio47",
+ "gpio48",
+ "gpio49",
+ "gpio50",
+ "gpio51",
+};
+
+static const char * const nand_groups[] = {
+ "nand_grp",
+};
+
+static const char * const dectpd_groups[] = {
+ "dectpd_grp",
+};
+
+static const char * const vdsl_phy_override_0_groups[] = {
+ "vdsl_phy_override_0_grp",
+};
+
+static const char * const vdsl_phy_override_1_groups[] = {
+ "vdsl_phy_override_1_grp",
+};
+
+static const char * const vdsl_phy_override_2_groups[] = {
+ "vdsl_phy_override_2_grp",
+};
+
+static const char * const vdsl_phy_override_3_groups[] = {
+ "vdsl_phy_override_3_grp",
+};
+
+#define BCM63268_LED_FUN(n) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .reg = BCM63268_LEDCTRL, \
+ }
+
+#define BCM63268_MODE_FUN(n) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .reg = BCM63268_MODE, \
+ }
+
+#define BCM63268_CTRL_FUN(n) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .reg = BCM63268_CTRL, \
+ }
+
+#define BCM63268_BASEMODE_FUN(n, val) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .reg = BCM63268_BASEMODE, \
+ .mask = val, \
+ }
+
+static const struct bcm63268_function bcm63268_funcs[] = {
+ BCM63268_LED_FUN(led),
+ BCM63268_MODE_FUN(serial_led_clk),
+ BCM63268_MODE_FUN(serial_led_data),
+ BCM63268_MODE_FUN(hsspi_cs6),
+ BCM63268_MODE_FUN(hsspi_cs7),
+ BCM63268_MODE_FUN(uart1_scts),
+ BCM63268_MODE_FUN(uart1_srts),
+ BCM63268_MODE_FUN(uart1_sdin),
+ BCM63268_MODE_FUN(uart1_sdout),
+ BCM63268_MODE_FUN(ntr_pulse_in),
+ BCM63268_MODE_FUN(dsl_ntr_pulse_out),
+ BCM63268_MODE_FUN(hsspi_cs4),
+ BCM63268_MODE_FUN(hsspi_cs5),
+ BCM63268_MODE_FUN(adsl_spi_miso),
+ BCM63268_MODE_FUN(adsl_spi_mosi),
+ BCM63268_MODE_FUN(vreg_clk),
+ BCM63268_MODE_FUN(pcie_clkreq_b),
+ BCM63268_MODE_FUN(switch_led_clk),
+ BCM63268_MODE_FUN(switch_led_data),
+ BCM63268_CTRL_FUN(wifi),
+ BCM63268_BASEMODE_FUN(nand, BCM63268_BASEMODE_NAND),
+ BCM63268_BASEMODE_FUN(dectpd, BCM63268_BASEMODE_DECTPD),
+ BCM63268_BASEMODE_FUN(vdsl_phy_override_0,
+ BCM63268_BASEMODE_VDSL_PHY_0),
+ BCM63268_BASEMODE_FUN(vdsl_phy_override_1,
+ BCM63268_BASEMODE_VDSL_PHY_1),
+ BCM63268_BASEMODE_FUN(vdsl_phy_override_2,
+ BCM63268_BASEMODE_VDSL_PHY_2),
+ BCM63268_BASEMODE_FUN(vdsl_phy_override_3,
+ BCM63268_BASEMODE_VDSL_PHY_3),
+};
+
+static int bcm63268_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm63268_groups);
+}
+
+static const char *bcm63268_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned group)
+{
+ return bcm63268_groups[group].name;
+}
+
+static int bcm63268_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned group,
+ const unsigned **pins,
+ unsigned *num_pins)
+{
+ *pins = bcm63268_groups[group].pins;
+ *num_pins = bcm63268_groups[group].num_pins;
+
+ return 0;
+}
+
+static int bcm63268_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm63268_funcs);
+}
+
+static const char *bcm63268_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return bcm63268_funcs[selector].name;
+}
+
+static int bcm63268_pinctrl_get_groups(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ *groups = bcm63268_funcs[selector].groups;
+ *num_groups = bcm63268_funcs[selector].num_groups;
+
+ return 0;
+}
+
+static void bcm63268_set_gpio(struct bcm63xx_pinctrl *pc, unsigned pin)
+{
+ const struct pinctrl_pin_desc *desc = &bcm63268_pins[pin];
+ unsigned int basemode = (unsigned long) desc->drv_data;
+ unsigned int mask = BIT(bcm63xx_bank_pin(pin));
+
+ if (basemode)
+ regmap_update_bits(pc->regs, BCM63268_BASEMODE_REG, basemode,
+ 0);
+
+ if (pin < BCM63XX_BANK_GPIOS) {
+ /* base mode: 0 => gpio, 1 => mux function */
+ regmap_update_bits(pc->regs, BCM63268_MODE_REG, mask, 0);
+
+ /* pins 0-23 might be muxed to led */
+ if (pin < BCM63268_NUM_LEDS)
+ regmap_update_bits(pc->regs, BCM63268_LED_REG, mask,
+ 0);
+ } else if (pin < BCM63268_NUM_GPIOS) {
+ /* ctrl reg: 0 => wifi function, 1 => gpio */
+ regmap_update_bits(pc->regs, BCM63268_CTRL_REG, mask, mask);
+ }
+}
+
+static int bcm63268_pinctrl_set_mux(struct pinctrl_dev *pctldev,
+ unsigned selector, unsigned group)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ const struct bcm63268_pingroup *pg = &bcm63268_groups[group];
+ const struct bcm63268_function *f = &bcm63268_funcs[selector];
+ unsigned i;
+ unsigned int reg;
+ unsigned int val, mask;
+
+ for (i = 0; i < pg->num_pins; i++)
+ bcm63268_set_gpio(pc, pg->pins[i]);
+
+ switch (f->reg) {
+ case BCM63268_LEDCTRL:
+ reg = BCM63268_LED_REG;
+ mask = BIT(pg->pins[0]);
+ val = BIT(pg->pins[0]);
+ break;
+ case BCM63268_MODE:
+ reg = BCM63268_MODE_REG;
+ mask = BIT(pg->pins[0]);
+ val = BIT(pg->pins[0]);
+ break;
+ case BCM63268_CTRL:
+ reg = BCM63268_CTRL_REG;
+ mask = BIT(pg->pins[0]);
+ val = 0;
+ break;
+ case BCM63268_BASEMODE:
+ reg = BCM63268_BASEMODE_REG;
+ mask = f->mask;
+ val = f->mask;
+ break;
+ default:
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ regmap_update_bits(pc->regs, reg, mask, val);
+
+ return 0;
+}
+
+static int bcm63268_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+
+ /* disable all functions using this pin */
+ bcm63268_set_gpio(pc, offset);
+
+ return 0;
+}
+
+static struct pinctrl_ops bcm63268_pctl_ops = {
+ .dt_free_map = pinctrl_utils_free_map,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .get_group_name = bcm63268_pinctrl_get_group_name,
+ .get_group_pins = bcm63268_pinctrl_get_group_pins,
+ .get_groups_count = bcm63268_pinctrl_get_group_count,
+};
+
+static struct pinmux_ops bcm63268_pmx_ops = {
+ .get_function_groups = bcm63268_pinctrl_get_groups,
+ .get_function_name = bcm63268_pinctrl_get_func_name,
+ .get_functions_count = bcm63268_pinctrl_get_func_count,
+ .gpio_request_enable = bcm63268_gpio_request_enable,
+ .set_mux = bcm63268_pinctrl_set_mux,
+ .strict = true,
+};
+
+static const struct bcm63xx_pinctrl_soc bcm63268_soc = {
+ .ngpios = BCM63268_NUM_GPIOS,
+ .npins = ARRAY_SIZE(bcm63268_pins),
+ .pctl_ops = &bcm63268_pctl_ops,
+ .pins = bcm63268_pins,
+ .pmx_ops = &bcm63268_pmx_ops,
+};
+
+static int bcm63268_pinctrl_probe(struct platform_device *pdev)
+{
+ return bcm63xx_pinctrl_probe(pdev, &bcm63268_soc, NULL);
+}
+
+static const struct of_device_id bcm63268_pinctrl_match[] = {
+ { .compatible = "brcm,bcm63268-pinctrl", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver bcm63268_pinctrl_driver = {
+ .probe = bcm63268_pinctrl_probe,
+ .driver = {
+ .name = "bcm63268-pinctrl",
+ .of_match_table = bcm63268_pinctrl_match,
+ },
+};
+
+builtin_platform_driver(bcm63268_pinctrl_driver);
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v5 14/15] dt-bindings: add BCM6318 pincontroller binding documentation
2021-03-06 15:56 ` Álvaro Fernández Rojas
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
-1 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add binding documentation for the pincontrol core found in BCM6318 SoCs.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: change Documentation to dt-bindings in commit title
v4: no changes
v3: add new gpio node
v2: remove interrupts
.../pinctrl/brcm,bcm6318-pinctrl.yaml | 187 ++++++++++++++++++
1 file changed, 187 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
new file mode 100644
index 000000000000..979b9d06de15
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6318-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6318 pin controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |+
+ The pin controller node should be the child of a syscon node.
+
+ Refer to the the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+ compatible:
+ const: brcm,bcm6318-pinctrl
+
+patternProperties:
+ '^gpio$':
+ type: object
+ properties:
+ compatible:
+ const: brcm,bcm6318-gpio
+
+ data:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the data register (in bytes).
+
+ dirout:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the dirout register (in bytes).
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ required:
+ - gpio-controller
+ - gpio-ranges
+ - '#gpio-cells'
+
+ '^.*$':
+ if:
+ type: object
+ then:
+ properties:
+ function:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ ephy0_spd_led, ephy1_spd_led, ephy2_spd_led, ephy3_spd_led,
+ ephy0_act_led, ephy1_act_led, ephy2_act_led, ephy3_act_led,
+ serial_led_data, serial_led_clk, inet_act_led, inet_fail_led,
+ dsl_led, post_fail_led, wlan_wps_led, usb_pwron,
+ usb_device_led, usb_active ]
+
+ pins:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ]
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio_cntl@10000080 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x10000080 0x80>;
+
+ pinctrl: pinctrl {
+ compatible = "brcm,bcm6318-pinctrl";
+
+ gpio {
+ compatible = "brcm,bcm6318-gpio";
+ data = <0xc>;
+ dirout = <0x4>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 50>;
+ #gpio-cells = <2>;
+ };
+
+ pinctrl_ephy0_spd_led: ephy0_spd_led {
+ function = "ephy0_spd_led";
+ pins = "gpio0";
+ };
+
+ pinctrl_ephy1_spd_led: ephy1_spd_led {
+ function = "ephy1_spd_led";
+ pins = "gpio1";
+ };
+
+ pinctrl_ephy2_spd_led: ephy2_spd_led {
+ function = "ephy2_spd_led";
+ pins = "gpio2";
+ };
+
+ pinctrl_ephy3_spd_led: ephy3_spd_led {
+ function = "ephy3_spd_led";
+ pins = "gpio3";
+ };
+
+ pinctrl_ephy0_act_led: ephy0_act_led {
+ function = "ephy0_act_led";
+ pins = "gpio4";
+ };
+
+ pinctrl_ephy1_act_led: ephy1_act_led {
+ function = "ephy1_act_led";
+ pins = "gpio5";
+ };
+
+ pinctrl_ephy2_act_led: ephy2_act_led {
+ function = "ephy2_act_led";
+ pins = "gpio6";
+ };
+
+ pinctrl_ephy3_act_led: ephy3_act_led {
+ function = "ephy3_act_led";
+ pins = "gpio7";
+ };
+
+ pinctrl_serial_led: serial_led {
+ pinctrl_serial_led_data: serial_led_data {
+ function = "serial_led_data";
+ pins = "gpio6";
+ };
+
+ pinctrl_serial_led_clk: serial_led_clk {
+ function = "serial_led_clk";
+ pins = "gpio7";
+ };
+ };
+
+ pinctrl_inet_act_led: inet_act_led {
+ function = "inet_act_led";
+ pins = "gpio8";
+ };
+
+ pinctrl_inet_fail_led: inet_fail_led {
+ function = "inet_fail_led";
+ pins = "gpio9";
+ };
+
+ pinctrl_dsl_led: dsl_led {
+ function = "dsl_led";
+ pins = "gpio10";
+ };
+
+ pinctrl_post_fail_led: post_fail_led {
+ function = "post_fail_led";
+ pins = "gpio11";
+ };
+
+ pinctrl_wlan_wps_led: wlan_wps_led {
+ function = "wlan_wps_led";
+ pins = "gpio12";
+ };
+
+ pinctrl_usb_pwron: usb_pwron {
+ function = "usb_pwron";
+ pins = "gpio13";
+ };
+
+ pinctrl_usb_device_led: usb_device_led {
+ function = "usb_device_led";
+ pins = "gpio13";
+ };
+
+ pinctrl_usb_active: usb_active {
+ function = "usb_active";
+ pins = "gpio40";
+ };
+ };
+ };
--
2.20.1
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v5 14/15] dt-bindings: add BCM6318 pincontroller binding documentation
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
0 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add binding documentation for the pincontrol core found in BCM6318 SoCs.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: change Documentation to dt-bindings in commit title
v4: no changes
v3: add new gpio node
v2: remove interrupts
.../pinctrl/brcm,bcm6318-pinctrl.yaml | 187 ++++++++++++++++++
1 file changed, 187 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
new file mode 100644
index 000000000000..979b9d06de15
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6318-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6318 pin controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |+
+ The pin controller node should be the child of a syscon node.
+
+ Refer to the the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+ compatible:
+ const: brcm,bcm6318-pinctrl
+
+patternProperties:
+ '^gpio$':
+ type: object
+ properties:
+ compatible:
+ const: brcm,bcm6318-gpio
+
+ data:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the data register (in bytes).
+
+ dirout:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in the register map for the dirout register (in bytes).
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ required:
+ - gpio-controller
+ - gpio-ranges
+ - '#gpio-cells'
+
+ '^.*$':
+ if:
+ type: object
+ then:
+ properties:
+ function:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ ephy0_spd_led, ephy1_spd_led, ephy2_spd_led, ephy3_spd_led,
+ ephy0_act_led, ephy1_act_led, ephy2_act_led, ephy3_act_led,
+ serial_led_data, serial_led_clk, inet_act_led, inet_fail_led,
+ dsl_led, post_fail_led, wlan_wps_led, usb_pwron,
+ usb_device_led, usb_active ]
+
+ pins:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ]
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio_cntl@10000080 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x10000080 0x80>;
+
+ pinctrl: pinctrl {
+ compatible = "brcm,bcm6318-pinctrl";
+
+ gpio {
+ compatible = "brcm,bcm6318-gpio";
+ data = <0xc>;
+ dirout = <0x4>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 50>;
+ #gpio-cells = <2>;
+ };
+
+ pinctrl_ephy0_spd_led: ephy0_spd_led {
+ function = "ephy0_spd_led";
+ pins = "gpio0";
+ };
+
+ pinctrl_ephy1_spd_led: ephy1_spd_led {
+ function = "ephy1_spd_led";
+ pins = "gpio1";
+ };
+
+ pinctrl_ephy2_spd_led: ephy2_spd_led {
+ function = "ephy2_spd_led";
+ pins = "gpio2";
+ };
+
+ pinctrl_ephy3_spd_led: ephy3_spd_led {
+ function = "ephy3_spd_led";
+ pins = "gpio3";
+ };
+
+ pinctrl_ephy0_act_led: ephy0_act_led {
+ function = "ephy0_act_led";
+ pins = "gpio4";
+ };
+
+ pinctrl_ephy1_act_led: ephy1_act_led {
+ function = "ephy1_act_led";
+ pins = "gpio5";
+ };
+
+ pinctrl_ephy2_act_led: ephy2_act_led {
+ function = "ephy2_act_led";
+ pins = "gpio6";
+ };
+
+ pinctrl_ephy3_act_led: ephy3_act_led {
+ function = "ephy3_act_led";
+ pins = "gpio7";
+ };
+
+ pinctrl_serial_led: serial_led {
+ pinctrl_serial_led_data: serial_led_data {
+ function = "serial_led_data";
+ pins = "gpio6";
+ };
+
+ pinctrl_serial_led_clk: serial_led_clk {
+ function = "serial_led_clk";
+ pins = "gpio7";
+ };
+ };
+
+ pinctrl_inet_act_led: inet_act_led {
+ function = "inet_act_led";
+ pins = "gpio8";
+ };
+
+ pinctrl_inet_fail_led: inet_fail_led {
+ function = "inet_fail_led";
+ pins = "gpio9";
+ };
+
+ pinctrl_dsl_led: dsl_led {
+ function = "dsl_led";
+ pins = "gpio10";
+ };
+
+ pinctrl_post_fail_led: post_fail_led {
+ function = "post_fail_led";
+ pins = "gpio11";
+ };
+
+ pinctrl_wlan_wps_led: wlan_wps_led {
+ function = "wlan_wps_led";
+ pins = "gpio12";
+ };
+
+ pinctrl_usb_pwron: usb_pwron {
+ function = "usb_pwron";
+ pins = "gpio13";
+ };
+
+ pinctrl_usb_device_led: usb_device_led {
+ function = "usb_device_led";
+ pins = "gpio13";
+ };
+
+ pinctrl_usb_active: usb_active {
+ function = "usb_active";
+ pins = "gpio40";
+ };
+ };
+ };
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 47+ messages in thread* Re: [PATCH v5 14/15] dt-bindings: add BCM6318 pincontroller binding documentation
2021-03-06 15:57 ` Álvaro Fernández Rojas
@ 2021-03-08 22:50 ` Rob Herring
-1 siblings, 0 replies; 47+ messages in thread
From: Rob Herring @ 2021-03-08 22:50 UTC (permalink / raw)
To: Álvaro Fernández Rojas
Cc: Linus Walleij, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Necip Fazil Yildiran, Andy Shevchenko, linux-gpio, devicetree,
linux-kernel, linux-arm-kernel
On Sat, Mar 06, 2021 at 04:57:11PM +0100, Álvaro Fernández Rojas wrote:
> Add binding documentation for the pincontrol core found in BCM6318 SoCs.
In case it's not clear, the same comments apply to all the binding
patches.
>
> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
> Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
> ---
> v5: change Documentation to dt-bindings in commit title
> v4: no changes
> v3: add new gpio node
> v2: remove interrupts
4 versions in a week is a bit much. Give folks time to review things.
Rob
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH v5 14/15] dt-bindings: add BCM6318 pincontroller binding documentation
@ 2021-03-08 22:50 ` Rob Herring
0 siblings, 0 replies; 47+ messages in thread
From: Rob Herring @ 2021-03-08 22:50 UTC (permalink / raw)
To: Álvaro Fernández Rojas
Cc: Linus Walleij, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Necip Fazil Yildiran, Andy Shevchenko, linux-gpio, devicetree,
linux-kernel, linux-arm-kernel
On Sat, Mar 06, 2021 at 04:57:11PM +0100, Álvaro Fernández Rojas wrote:
> Add binding documentation for the pincontrol core found in BCM6318 SoCs.
In case it's not clear, the same comments apply to all the binding
patches.
>
> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
> Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
> ---
> v5: change Documentation to dt-bindings in commit title
> v4: no changes
> v3: add new gpio node
> v2: remove interrupts
4 versions in a week is a bit much. Give folks time to review things.
Rob
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH v5 15/15] pinctrl: add a pincontrol driver for BCM6318
2021-03-06 15:56 ` Álvaro Fernández Rojas
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
-1 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add a pincontrol driver for BCM6318. BCM6318 allows muxing most GPIOs
to different functions. BCM6318 is similar to BCM6328 with the addition
of a pad register, and the GPIO meaning of the mux register changes
based on the GPIO number.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: add changes suggested by Andy Shevchenko
v4: no changes
v3: use new shared code
v2: switch to GPIO_REGMAP
drivers/pinctrl/bcm/Kconfig | 8 +
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-bcm6318.c | 498 ++++++++++++++++++++++++++
3 files changed, 507 insertions(+)
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6318.c
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index 186985846120..33660e8fec05 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -36,6 +36,14 @@ config PINCTRL_BCM63XX
select PINCONF
select PINMUX
+config PINCTRL_BCM6318
+ bool "Broadcom BCM6318 GPIO driver"
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
+ select PINCTRL_BCM63XX
+ default BMIPS_GENERIC
+ help
+ Say Y here to enable the Broadcom BCM6318 GPIO driver.
+
config PINCTRL_BCM6328
bool "Broadcom BCM6328 GPIO driver"
depends on (BMIPS_GENERIC || COMPILE_TEST)
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index 4117847fd279..00c7b7775e63 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
+obj-$(CONFIG_PINCTRL_BCM6318) += pinctrl-bcm6318.o
obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm6318.c b/drivers/pinctrl/bcm/pinctrl-bcm6318.c
new file mode 100644
index 000000000000..77fd9b58067d
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6318.c
@@ -0,0 +1,498 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for BCM6318 GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "../pinctrl-utils.h"
+
+#include "pinctrl-bcm63xx.h"
+
+#define BCM6318_NUM_GPIOS 50
+#define BCM6318_NUM_MUX 48
+
+#define BCM6318_MODE_REG 0x18
+#define BCM6318_MUX_REG 0x1c
+#define BCM6328_MUX_MASK GENMASK(1, 0)
+#define BCM6318_PAD_REG 0x54
+#define BCM6328_PAD_MASK GENMASK(3, 0)
+
+struct bcm6318_pingroup {
+ const char *name;
+ const unsigned * const pins;
+ const unsigned num_pins;
+};
+
+struct bcm6318_function {
+ const char *name;
+ const char * const *groups;
+ const unsigned num_groups;
+
+ unsigned mode_val:1;
+ unsigned mux_val:2;
+};
+
+static const struct pinctrl_pin_desc bcm6318_pins[] = {
+ PINCTRL_PIN(0, "gpio0"),
+ PINCTRL_PIN(1, "gpio1"),
+ PINCTRL_PIN(2, "gpio2"),
+ PINCTRL_PIN(3, "gpio3"),
+ PINCTRL_PIN(4, "gpio4"),
+ PINCTRL_PIN(5, "gpio5"),
+ PINCTRL_PIN(6, "gpio6"),
+ PINCTRL_PIN(7, "gpio7"),
+ PINCTRL_PIN(8, "gpio8"),
+ PINCTRL_PIN(9, "gpio9"),
+ PINCTRL_PIN(10, "gpio10"),
+ PINCTRL_PIN(11, "gpio11"),
+ PINCTRL_PIN(12, "gpio12"),
+ PINCTRL_PIN(13, "gpio13"),
+ PINCTRL_PIN(14, "gpio14"),
+ PINCTRL_PIN(15, "gpio15"),
+ PINCTRL_PIN(16, "gpio16"),
+ PINCTRL_PIN(17, "gpio17"),
+ PINCTRL_PIN(18, "gpio18"),
+ PINCTRL_PIN(19, "gpio19"),
+ PINCTRL_PIN(20, "gpio20"),
+ PINCTRL_PIN(21, "gpio21"),
+ PINCTRL_PIN(22, "gpio22"),
+ PINCTRL_PIN(23, "gpio23"),
+ PINCTRL_PIN(24, "gpio24"),
+ PINCTRL_PIN(25, "gpio25"),
+ PINCTRL_PIN(26, "gpio26"),
+ PINCTRL_PIN(27, "gpio27"),
+ PINCTRL_PIN(28, "gpio28"),
+ PINCTRL_PIN(29, "gpio29"),
+ PINCTRL_PIN(30, "gpio30"),
+ PINCTRL_PIN(31, "gpio31"),
+ PINCTRL_PIN(32, "gpio32"),
+ PINCTRL_PIN(33, "gpio33"),
+ PINCTRL_PIN(34, "gpio34"),
+ PINCTRL_PIN(35, "gpio35"),
+ PINCTRL_PIN(36, "gpio36"),
+ PINCTRL_PIN(37, "gpio37"),
+ PINCTRL_PIN(38, "gpio38"),
+ PINCTRL_PIN(39, "gpio39"),
+ PINCTRL_PIN(40, "gpio40"),
+ PINCTRL_PIN(41, "gpio41"),
+ PINCTRL_PIN(42, "gpio42"),
+ PINCTRL_PIN(43, "gpio43"),
+ PINCTRL_PIN(44, "gpio44"),
+ PINCTRL_PIN(45, "gpio45"),
+ PINCTRL_PIN(46, "gpio46"),
+ PINCTRL_PIN(47, "gpio47"),
+ PINCTRL_PIN(48, "gpio48"),
+ PINCTRL_PIN(49, "gpio49"),
+};
+
+static unsigned gpio0_pins[] = { 0 };
+static unsigned gpio1_pins[] = { 1 };
+static unsigned gpio2_pins[] = { 2 };
+static unsigned gpio3_pins[] = { 3 };
+static unsigned gpio4_pins[] = { 4 };
+static unsigned gpio5_pins[] = { 5 };
+static unsigned gpio6_pins[] = { 6 };
+static unsigned gpio7_pins[] = { 7 };
+static unsigned gpio8_pins[] = { 8 };
+static unsigned gpio9_pins[] = { 9 };
+static unsigned gpio10_pins[] = { 10 };
+static unsigned gpio11_pins[] = { 11 };
+static unsigned gpio12_pins[] = { 12 };
+static unsigned gpio13_pins[] = { 13 };
+static unsigned gpio14_pins[] = { 14 };
+static unsigned gpio15_pins[] = { 15 };
+static unsigned gpio16_pins[] = { 16 };
+static unsigned gpio17_pins[] = { 17 };
+static unsigned gpio18_pins[] = { 18 };
+static unsigned gpio19_pins[] = { 19 };
+static unsigned gpio20_pins[] = { 20 };
+static unsigned gpio21_pins[] = { 21 };
+static unsigned gpio22_pins[] = { 22 };
+static unsigned gpio23_pins[] = { 23 };
+static unsigned gpio24_pins[] = { 24 };
+static unsigned gpio25_pins[] = { 25 };
+static unsigned gpio26_pins[] = { 26 };
+static unsigned gpio27_pins[] = { 27 };
+static unsigned gpio28_pins[] = { 28 };
+static unsigned gpio29_pins[] = { 29 };
+static unsigned gpio30_pins[] = { 30 };
+static unsigned gpio31_pins[] = { 31 };
+static unsigned gpio32_pins[] = { 32 };
+static unsigned gpio33_pins[] = { 33 };
+static unsigned gpio34_pins[] = { 34 };
+static unsigned gpio35_pins[] = { 35 };
+static unsigned gpio36_pins[] = { 36 };
+static unsigned gpio37_pins[] = { 37 };
+static unsigned gpio38_pins[] = { 38 };
+static unsigned gpio39_pins[] = { 39 };
+static unsigned gpio40_pins[] = { 40 };
+static unsigned gpio41_pins[] = { 41 };
+static unsigned gpio42_pins[] = { 42 };
+static unsigned gpio43_pins[] = { 43 };
+static unsigned gpio44_pins[] = { 44 };
+static unsigned gpio45_pins[] = { 45 };
+static unsigned gpio46_pins[] = { 46 };
+static unsigned gpio47_pins[] = { 47 };
+static unsigned gpio48_pins[] = { 48 };
+static unsigned gpio49_pins[] = { 49 };
+
+#define BCM6318_GROUP(n) \
+ { \
+ .name = #n, \
+ .pins = n##_pins, \
+ .num_pins = ARRAY_SIZE(n##_pins), \
+ }
+
+static struct bcm6318_pingroup bcm6318_groups[] = {
+ BCM6318_GROUP(gpio0),
+ BCM6318_GROUP(gpio1),
+ BCM6318_GROUP(gpio2),
+ BCM6318_GROUP(gpio3),
+ BCM6318_GROUP(gpio4),
+ BCM6318_GROUP(gpio5),
+ BCM6318_GROUP(gpio6),
+ BCM6318_GROUP(gpio7),
+ BCM6318_GROUP(gpio8),
+ BCM6318_GROUP(gpio9),
+ BCM6318_GROUP(gpio10),
+ BCM6318_GROUP(gpio11),
+ BCM6318_GROUP(gpio12),
+ BCM6318_GROUP(gpio13),
+ BCM6318_GROUP(gpio14),
+ BCM6318_GROUP(gpio15),
+ BCM6318_GROUP(gpio16),
+ BCM6318_GROUP(gpio17),
+ BCM6318_GROUP(gpio18),
+ BCM6318_GROUP(gpio19),
+ BCM6318_GROUP(gpio20),
+ BCM6318_GROUP(gpio21),
+ BCM6318_GROUP(gpio22),
+ BCM6318_GROUP(gpio23),
+ BCM6318_GROUP(gpio24),
+ BCM6318_GROUP(gpio25),
+ BCM6318_GROUP(gpio26),
+ BCM6318_GROUP(gpio27),
+ BCM6318_GROUP(gpio28),
+ BCM6318_GROUP(gpio29),
+ BCM6318_GROUP(gpio30),
+ BCM6318_GROUP(gpio31),
+ BCM6318_GROUP(gpio32),
+ BCM6318_GROUP(gpio33),
+ BCM6318_GROUP(gpio34),
+ BCM6318_GROUP(gpio35),
+ BCM6318_GROUP(gpio36),
+ BCM6318_GROUP(gpio37),
+ BCM6318_GROUP(gpio38),
+ BCM6318_GROUP(gpio39),
+ BCM6318_GROUP(gpio40),
+ BCM6318_GROUP(gpio41),
+ BCM6318_GROUP(gpio42),
+ BCM6318_GROUP(gpio43),
+ BCM6318_GROUP(gpio44),
+ BCM6318_GROUP(gpio45),
+ BCM6318_GROUP(gpio46),
+ BCM6318_GROUP(gpio47),
+ BCM6318_GROUP(gpio48),
+ BCM6318_GROUP(gpio49),
+};
+
+/* GPIO_MODE */
+static const char * const led_groups[] = {
+ "gpio0",
+ "gpio1",
+ "gpio2",
+ "gpio3",
+ "gpio4",
+ "gpio5",
+ "gpio6",
+ "gpio7",
+ "gpio8",
+ "gpio9",
+ "gpio10",
+ "gpio11",
+ "gpio12",
+ "gpio13",
+ "gpio14",
+ "gpio15",
+ "gpio16",
+ "gpio17",
+ "gpio18",
+ "gpio19",
+ "gpio20",
+ "gpio21",
+ "gpio22",
+ "gpio23",
+};
+
+/* PINMUX_SEL */
+static const char * const ephy0_spd_led_groups[] = {
+ "gpio0",
+};
+
+static const char * const ephy1_spd_led_groups[] = {
+ "gpio1",
+};
+
+static const char * const ephy2_spd_led_groups[] = {
+ "gpio2",
+};
+
+static const char * const ephy3_spd_led_groups[] = {
+ "gpio3",
+};
+
+static const char * const ephy0_act_led_groups[] = {
+ "gpio4",
+};
+
+static const char * const ephy1_act_led_groups[] = {
+ "gpio5",
+};
+
+static const char * const ephy2_act_led_groups[] = {
+ "gpio6",
+};
+
+static const char * const ephy3_act_led_groups[] = {
+ "gpio7",
+};
+
+static const char * const serial_led_data_groups[] = {
+ "gpio6",
+};
+
+static const char * const serial_led_clk_groups[] = {
+ "gpio7",
+};
+
+static const char * const inet_act_led_groups[] = {
+ "gpio8",
+};
+
+static const char * const inet_fail_led_groups[] = {
+ "gpio9",
+};
+
+static const char * const dsl_led_groups[] = {
+ "gpio10",
+};
+
+static const char * const post_fail_led_groups[] = {
+ "gpio11",
+};
+
+static const char * const wlan_wps_led_groups[] = {
+ "gpio12",
+};
+
+static const char * const usb_pwron_groups[] = {
+ "gpio13",
+};
+
+static const char * const usb_device_led_groups[] = {
+ "gpio13",
+};
+
+static const char * const usb_active_groups[] = {
+ "gpio40",
+};
+
+#define BCM6318_MODE_FUN(n) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .mode_val = 1, \
+ }
+
+#define BCM6318_MUX_FUN(n, mux) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .mux_val = mux, \
+ }
+
+static const struct bcm6318_function bcm6318_funcs[] = {
+ BCM6318_MODE_FUN(led),
+ BCM6318_MUX_FUN(ephy0_spd_led, 1),
+ BCM6318_MUX_FUN(ephy1_spd_led, 1),
+ BCM6318_MUX_FUN(ephy2_spd_led, 1),
+ BCM6318_MUX_FUN(ephy3_spd_led, 1),
+ BCM6318_MUX_FUN(ephy0_act_led, 1),
+ BCM6318_MUX_FUN(ephy1_act_led, 1),
+ BCM6318_MUX_FUN(ephy2_act_led, 1),
+ BCM6318_MUX_FUN(ephy3_act_led, 1),
+ BCM6318_MUX_FUN(serial_led_data, 3),
+ BCM6318_MUX_FUN(serial_led_clk, 3),
+ BCM6318_MUX_FUN(inet_act_led, 1),
+ BCM6318_MUX_FUN(inet_fail_led, 1),
+ BCM6318_MUX_FUN(dsl_led, 1),
+ BCM6318_MUX_FUN(post_fail_led, 1),
+ BCM6318_MUX_FUN(wlan_wps_led, 1),
+ BCM6318_MUX_FUN(usb_pwron, 1),
+ BCM6318_MUX_FUN(usb_device_led, 2),
+ BCM6318_MUX_FUN(usb_active, 2),
+};
+
+static inline unsigned int bcm6318_mux_off(unsigned int pin)
+{
+ return BCM6318_MUX_REG + (pin / 16) * 4;
+}
+
+static inline unsigned int bcm6318_pad_off(unsigned int pin)
+{
+ return BCM6318_PAD_REG + (pin / 8) * 4;
+}
+
+static int bcm6318_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6318_groups);
+}
+
+static const char *bcm6318_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned group)
+{
+ return bcm6318_groups[group].name;
+}
+
+static int bcm6318_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned group, const unsigned **pins,
+ unsigned *num_pins)
+{
+ *pins = bcm6318_groups[group].pins;
+ *num_pins = bcm6318_groups[group].num_pins;
+
+ return 0;
+}
+
+static int bcm6318_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6318_funcs);
+}
+
+static const char *bcm6318_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return bcm6318_funcs[selector].name;
+}
+
+static int bcm6318_pinctrl_get_groups(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ *groups = bcm6318_funcs[selector].groups;
+ *num_groups = bcm6318_funcs[selector].num_groups;
+
+ return 0;
+}
+
+static inline void bcm6318_rmw_mux(struct bcm63xx_pinctrl *pc, unsigned pin,
+ unsigned int mode, unsigned int mux)
+{
+ if (pin < BCM63XX_BANK_GPIOS)
+ regmap_update_bits(pc->regs, BCM6318_MODE_REG, BIT(pin),
+ mode ? BIT(pin) : 0);
+
+ if (pin < BCM6318_NUM_MUX)
+ regmap_update_bits(pc->regs,
+ bcm6318_mux_off(pin),
+ BCM6328_MUX_MASK << ((pin % 16) * 2),
+ mux << ((pin % 16) * 2));
+}
+
+static inline void bcm6318_set_pad(struct bcm63xx_pinctrl *pc, unsigned pin,
+ uint8_t val)
+{
+ regmap_update_bits(pc->regs, bcm6318_pad_off(pin),
+ BCM6328_PAD_MASK << ((pin % 8) * 4),
+ val << ((pin % 8) * 4));
+}
+
+static int bcm6318_pinctrl_set_mux(struct pinctrl_dev *pctldev,
+ unsigned selector, unsigned group)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ const struct bcm6318_pingroup *pg = &bcm6318_groups[group];
+ const struct bcm6318_function *f = &bcm6318_funcs[selector];
+
+ bcm6318_rmw_mux(pc, pg->pins[0], f->mode_val, f->mux_val);
+
+ return 0;
+}
+
+static int bcm6318_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+
+ /* disable all functions using this pin */
+ if (offset < 13) {
+ /* GPIOs 0-12 use mux 0 as GPIO function */
+ bcm6318_rmw_mux(pc, offset, 0, 0);
+ } else if (offset < 42) {
+ /* GPIOs 13-41 use mux 3 as GPIO function */
+ bcm6318_rmw_mux(pc, offset, 0, 3);
+
+ bcm6318_set_pad(pc, offset, 0);
+ }
+
+ return 0;
+}
+
+static struct pinctrl_ops bcm6318_pctl_ops = {
+ .dt_free_map = pinctrl_utils_free_map,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .get_group_name = bcm6318_pinctrl_get_group_name,
+ .get_group_pins = bcm6318_pinctrl_get_group_pins,
+ .get_groups_count = bcm6318_pinctrl_get_group_count,
+};
+
+static struct pinmux_ops bcm6318_pmx_ops = {
+ .get_function_groups = bcm6318_pinctrl_get_groups,
+ .get_function_name = bcm6318_pinctrl_get_func_name,
+ .get_functions_count = bcm6318_pinctrl_get_func_count,
+ .gpio_request_enable = bcm6318_gpio_request_enable,
+ .set_mux = bcm6318_pinctrl_set_mux,
+ .strict = true,
+};
+
+static const struct bcm63xx_pinctrl_soc bcm6318_soc = {
+ .ngpios = BCM6318_NUM_GPIOS,
+ .npins = ARRAY_SIZE(bcm6318_pins),
+ .pctl_ops = &bcm6318_pctl_ops,
+ .pins = bcm6318_pins,
+ .pmx_ops = &bcm6318_pmx_ops,
+};
+
+static int bcm6318_pinctrl_probe(struct platform_device *pdev)
+{
+ return bcm63xx_pinctrl_probe(pdev, &bcm6318_soc, NULL);
+}
+
+static const struct of_device_id bcm6318_pinctrl_match[] = {
+ { .compatible = "brcm,bcm6318-pinctrl", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver bcm6318_pinctrl_driver = {
+ .probe = bcm6318_pinctrl_probe,
+ .driver = {
+ .name = "bcm6318-pinctrl",
+ .of_match_table = bcm6318_pinctrl_match,
+ },
+};
+
+builtin_platform_driver(bcm6318_pinctrl_driver);
--
2.20.1
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH v5 15/15] pinctrl: add a pincontrol driver for BCM6318
@ 2021-03-06 15:57 ` Álvaro Fernández Rojas
0 siblings, 0 replies; 47+ messages in thread
From: Álvaro Fernández Rojas @ 2021-03-06 15:57 UTC (permalink / raw)
To: Linus Walleij, Rob Herring, Michael Walle, Bartosz Golaszewski,
Florian Fainelli, bcm-kernel-feedback-list, Jonas Gorski,
Álvaro Fernández Rojas, Necip Fazil Yildiran,
Andy Shevchenko, linux-gpio, devicetree, linux-kernel,
linux-arm-kernel
Add a pincontrol driver for BCM6318. BCM6318 allows muxing most GPIOs
to different functions. BCM6318 is similar to BCM6328 with the addition
of a pad register, and the GPIO meaning of the mux register changes
based on the GPIO number.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
v5: add changes suggested by Andy Shevchenko
v4: no changes
v3: use new shared code
v2: switch to GPIO_REGMAP
drivers/pinctrl/bcm/Kconfig | 8 +
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-bcm6318.c | 498 ++++++++++++++++++++++++++
3 files changed, 507 insertions(+)
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6318.c
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index 186985846120..33660e8fec05 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -36,6 +36,14 @@ config PINCTRL_BCM63XX
select PINCONF
select PINMUX
+config PINCTRL_BCM6318
+ bool "Broadcom BCM6318 GPIO driver"
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
+ select PINCTRL_BCM63XX
+ default BMIPS_GENERIC
+ help
+ Say Y here to enable the Broadcom BCM6318 GPIO driver.
+
config PINCTRL_BCM6328
bool "Broadcom BCM6328 GPIO driver"
depends on (BMIPS_GENERIC || COMPILE_TEST)
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index 4117847fd279..00c7b7775e63 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
+obj-$(CONFIG_PINCTRL_BCM6318) += pinctrl-bcm6318.o
obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm6318.c b/drivers/pinctrl/bcm/pinctrl-bcm6318.c
new file mode 100644
index 000000000000..77fd9b58067d
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6318.c
@@ -0,0 +1,498 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for BCM6318 GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "../pinctrl-utils.h"
+
+#include "pinctrl-bcm63xx.h"
+
+#define BCM6318_NUM_GPIOS 50
+#define BCM6318_NUM_MUX 48
+
+#define BCM6318_MODE_REG 0x18
+#define BCM6318_MUX_REG 0x1c
+#define BCM6328_MUX_MASK GENMASK(1, 0)
+#define BCM6318_PAD_REG 0x54
+#define BCM6328_PAD_MASK GENMASK(3, 0)
+
+struct bcm6318_pingroup {
+ const char *name;
+ const unsigned * const pins;
+ const unsigned num_pins;
+};
+
+struct bcm6318_function {
+ const char *name;
+ const char * const *groups;
+ const unsigned num_groups;
+
+ unsigned mode_val:1;
+ unsigned mux_val:2;
+};
+
+static const struct pinctrl_pin_desc bcm6318_pins[] = {
+ PINCTRL_PIN(0, "gpio0"),
+ PINCTRL_PIN(1, "gpio1"),
+ PINCTRL_PIN(2, "gpio2"),
+ PINCTRL_PIN(3, "gpio3"),
+ PINCTRL_PIN(4, "gpio4"),
+ PINCTRL_PIN(5, "gpio5"),
+ PINCTRL_PIN(6, "gpio6"),
+ PINCTRL_PIN(7, "gpio7"),
+ PINCTRL_PIN(8, "gpio8"),
+ PINCTRL_PIN(9, "gpio9"),
+ PINCTRL_PIN(10, "gpio10"),
+ PINCTRL_PIN(11, "gpio11"),
+ PINCTRL_PIN(12, "gpio12"),
+ PINCTRL_PIN(13, "gpio13"),
+ PINCTRL_PIN(14, "gpio14"),
+ PINCTRL_PIN(15, "gpio15"),
+ PINCTRL_PIN(16, "gpio16"),
+ PINCTRL_PIN(17, "gpio17"),
+ PINCTRL_PIN(18, "gpio18"),
+ PINCTRL_PIN(19, "gpio19"),
+ PINCTRL_PIN(20, "gpio20"),
+ PINCTRL_PIN(21, "gpio21"),
+ PINCTRL_PIN(22, "gpio22"),
+ PINCTRL_PIN(23, "gpio23"),
+ PINCTRL_PIN(24, "gpio24"),
+ PINCTRL_PIN(25, "gpio25"),
+ PINCTRL_PIN(26, "gpio26"),
+ PINCTRL_PIN(27, "gpio27"),
+ PINCTRL_PIN(28, "gpio28"),
+ PINCTRL_PIN(29, "gpio29"),
+ PINCTRL_PIN(30, "gpio30"),
+ PINCTRL_PIN(31, "gpio31"),
+ PINCTRL_PIN(32, "gpio32"),
+ PINCTRL_PIN(33, "gpio33"),
+ PINCTRL_PIN(34, "gpio34"),
+ PINCTRL_PIN(35, "gpio35"),
+ PINCTRL_PIN(36, "gpio36"),
+ PINCTRL_PIN(37, "gpio37"),
+ PINCTRL_PIN(38, "gpio38"),
+ PINCTRL_PIN(39, "gpio39"),
+ PINCTRL_PIN(40, "gpio40"),
+ PINCTRL_PIN(41, "gpio41"),
+ PINCTRL_PIN(42, "gpio42"),
+ PINCTRL_PIN(43, "gpio43"),
+ PINCTRL_PIN(44, "gpio44"),
+ PINCTRL_PIN(45, "gpio45"),
+ PINCTRL_PIN(46, "gpio46"),
+ PINCTRL_PIN(47, "gpio47"),
+ PINCTRL_PIN(48, "gpio48"),
+ PINCTRL_PIN(49, "gpio49"),
+};
+
+static unsigned gpio0_pins[] = { 0 };
+static unsigned gpio1_pins[] = { 1 };
+static unsigned gpio2_pins[] = { 2 };
+static unsigned gpio3_pins[] = { 3 };
+static unsigned gpio4_pins[] = { 4 };
+static unsigned gpio5_pins[] = { 5 };
+static unsigned gpio6_pins[] = { 6 };
+static unsigned gpio7_pins[] = { 7 };
+static unsigned gpio8_pins[] = { 8 };
+static unsigned gpio9_pins[] = { 9 };
+static unsigned gpio10_pins[] = { 10 };
+static unsigned gpio11_pins[] = { 11 };
+static unsigned gpio12_pins[] = { 12 };
+static unsigned gpio13_pins[] = { 13 };
+static unsigned gpio14_pins[] = { 14 };
+static unsigned gpio15_pins[] = { 15 };
+static unsigned gpio16_pins[] = { 16 };
+static unsigned gpio17_pins[] = { 17 };
+static unsigned gpio18_pins[] = { 18 };
+static unsigned gpio19_pins[] = { 19 };
+static unsigned gpio20_pins[] = { 20 };
+static unsigned gpio21_pins[] = { 21 };
+static unsigned gpio22_pins[] = { 22 };
+static unsigned gpio23_pins[] = { 23 };
+static unsigned gpio24_pins[] = { 24 };
+static unsigned gpio25_pins[] = { 25 };
+static unsigned gpio26_pins[] = { 26 };
+static unsigned gpio27_pins[] = { 27 };
+static unsigned gpio28_pins[] = { 28 };
+static unsigned gpio29_pins[] = { 29 };
+static unsigned gpio30_pins[] = { 30 };
+static unsigned gpio31_pins[] = { 31 };
+static unsigned gpio32_pins[] = { 32 };
+static unsigned gpio33_pins[] = { 33 };
+static unsigned gpio34_pins[] = { 34 };
+static unsigned gpio35_pins[] = { 35 };
+static unsigned gpio36_pins[] = { 36 };
+static unsigned gpio37_pins[] = { 37 };
+static unsigned gpio38_pins[] = { 38 };
+static unsigned gpio39_pins[] = { 39 };
+static unsigned gpio40_pins[] = { 40 };
+static unsigned gpio41_pins[] = { 41 };
+static unsigned gpio42_pins[] = { 42 };
+static unsigned gpio43_pins[] = { 43 };
+static unsigned gpio44_pins[] = { 44 };
+static unsigned gpio45_pins[] = { 45 };
+static unsigned gpio46_pins[] = { 46 };
+static unsigned gpio47_pins[] = { 47 };
+static unsigned gpio48_pins[] = { 48 };
+static unsigned gpio49_pins[] = { 49 };
+
+#define BCM6318_GROUP(n) \
+ { \
+ .name = #n, \
+ .pins = n##_pins, \
+ .num_pins = ARRAY_SIZE(n##_pins), \
+ }
+
+static struct bcm6318_pingroup bcm6318_groups[] = {
+ BCM6318_GROUP(gpio0),
+ BCM6318_GROUP(gpio1),
+ BCM6318_GROUP(gpio2),
+ BCM6318_GROUP(gpio3),
+ BCM6318_GROUP(gpio4),
+ BCM6318_GROUP(gpio5),
+ BCM6318_GROUP(gpio6),
+ BCM6318_GROUP(gpio7),
+ BCM6318_GROUP(gpio8),
+ BCM6318_GROUP(gpio9),
+ BCM6318_GROUP(gpio10),
+ BCM6318_GROUP(gpio11),
+ BCM6318_GROUP(gpio12),
+ BCM6318_GROUP(gpio13),
+ BCM6318_GROUP(gpio14),
+ BCM6318_GROUP(gpio15),
+ BCM6318_GROUP(gpio16),
+ BCM6318_GROUP(gpio17),
+ BCM6318_GROUP(gpio18),
+ BCM6318_GROUP(gpio19),
+ BCM6318_GROUP(gpio20),
+ BCM6318_GROUP(gpio21),
+ BCM6318_GROUP(gpio22),
+ BCM6318_GROUP(gpio23),
+ BCM6318_GROUP(gpio24),
+ BCM6318_GROUP(gpio25),
+ BCM6318_GROUP(gpio26),
+ BCM6318_GROUP(gpio27),
+ BCM6318_GROUP(gpio28),
+ BCM6318_GROUP(gpio29),
+ BCM6318_GROUP(gpio30),
+ BCM6318_GROUP(gpio31),
+ BCM6318_GROUP(gpio32),
+ BCM6318_GROUP(gpio33),
+ BCM6318_GROUP(gpio34),
+ BCM6318_GROUP(gpio35),
+ BCM6318_GROUP(gpio36),
+ BCM6318_GROUP(gpio37),
+ BCM6318_GROUP(gpio38),
+ BCM6318_GROUP(gpio39),
+ BCM6318_GROUP(gpio40),
+ BCM6318_GROUP(gpio41),
+ BCM6318_GROUP(gpio42),
+ BCM6318_GROUP(gpio43),
+ BCM6318_GROUP(gpio44),
+ BCM6318_GROUP(gpio45),
+ BCM6318_GROUP(gpio46),
+ BCM6318_GROUP(gpio47),
+ BCM6318_GROUP(gpio48),
+ BCM6318_GROUP(gpio49),
+};
+
+/* GPIO_MODE */
+static const char * const led_groups[] = {
+ "gpio0",
+ "gpio1",
+ "gpio2",
+ "gpio3",
+ "gpio4",
+ "gpio5",
+ "gpio6",
+ "gpio7",
+ "gpio8",
+ "gpio9",
+ "gpio10",
+ "gpio11",
+ "gpio12",
+ "gpio13",
+ "gpio14",
+ "gpio15",
+ "gpio16",
+ "gpio17",
+ "gpio18",
+ "gpio19",
+ "gpio20",
+ "gpio21",
+ "gpio22",
+ "gpio23",
+};
+
+/* PINMUX_SEL */
+static const char * const ephy0_spd_led_groups[] = {
+ "gpio0",
+};
+
+static const char * const ephy1_spd_led_groups[] = {
+ "gpio1",
+};
+
+static const char * const ephy2_spd_led_groups[] = {
+ "gpio2",
+};
+
+static const char * const ephy3_spd_led_groups[] = {
+ "gpio3",
+};
+
+static const char * const ephy0_act_led_groups[] = {
+ "gpio4",
+};
+
+static const char * const ephy1_act_led_groups[] = {
+ "gpio5",
+};
+
+static const char * const ephy2_act_led_groups[] = {
+ "gpio6",
+};
+
+static const char * const ephy3_act_led_groups[] = {
+ "gpio7",
+};
+
+static const char * const serial_led_data_groups[] = {
+ "gpio6",
+};
+
+static const char * const serial_led_clk_groups[] = {
+ "gpio7",
+};
+
+static const char * const inet_act_led_groups[] = {
+ "gpio8",
+};
+
+static const char * const inet_fail_led_groups[] = {
+ "gpio9",
+};
+
+static const char * const dsl_led_groups[] = {
+ "gpio10",
+};
+
+static const char * const post_fail_led_groups[] = {
+ "gpio11",
+};
+
+static const char * const wlan_wps_led_groups[] = {
+ "gpio12",
+};
+
+static const char * const usb_pwron_groups[] = {
+ "gpio13",
+};
+
+static const char * const usb_device_led_groups[] = {
+ "gpio13",
+};
+
+static const char * const usb_active_groups[] = {
+ "gpio40",
+};
+
+#define BCM6318_MODE_FUN(n) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .mode_val = 1, \
+ }
+
+#define BCM6318_MUX_FUN(n, mux) \
+ { \
+ .name = #n, \
+ .groups = n##_groups, \
+ .num_groups = ARRAY_SIZE(n##_groups), \
+ .mux_val = mux, \
+ }
+
+static const struct bcm6318_function bcm6318_funcs[] = {
+ BCM6318_MODE_FUN(led),
+ BCM6318_MUX_FUN(ephy0_spd_led, 1),
+ BCM6318_MUX_FUN(ephy1_spd_led, 1),
+ BCM6318_MUX_FUN(ephy2_spd_led, 1),
+ BCM6318_MUX_FUN(ephy3_spd_led, 1),
+ BCM6318_MUX_FUN(ephy0_act_led, 1),
+ BCM6318_MUX_FUN(ephy1_act_led, 1),
+ BCM6318_MUX_FUN(ephy2_act_led, 1),
+ BCM6318_MUX_FUN(ephy3_act_led, 1),
+ BCM6318_MUX_FUN(serial_led_data, 3),
+ BCM6318_MUX_FUN(serial_led_clk, 3),
+ BCM6318_MUX_FUN(inet_act_led, 1),
+ BCM6318_MUX_FUN(inet_fail_led, 1),
+ BCM6318_MUX_FUN(dsl_led, 1),
+ BCM6318_MUX_FUN(post_fail_led, 1),
+ BCM6318_MUX_FUN(wlan_wps_led, 1),
+ BCM6318_MUX_FUN(usb_pwron, 1),
+ BCM6318_MUX_FUN(usb_device_led, 2),
+ BCM6318_MUX_FUN(usb_active, 2),
+};
+
+static inline unsigned int bcm6318_mux_off(unsigned int pin)
+{
+ return BCM6318_MUX_REG + (pin / 16) * 4;
+}
+
+static inline unsigned int bcm6318_pad_off(unsigned int pin)
+{
+ return BCM6318_PAD_REG + (pin / 8) * 4;
+}
+
+static int bcm6318_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6318_groups);
+}
+
+static const char *bcm6318_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned group)
+{
+ return bcm6318_groups[group].name;
+}
+
+static int bcm6318_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned group, const unsigned **pins,
+ unsigned *num_pins)
+{
+ *pins = bcm6318_groups[group].pins;
+ *num_pins = bcm6318_groups[group].num_pins;
+
+ return 0;
+}
+
+static int bcm6318_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm6318_funcs);
+}
+
+static const char *bcm6318_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return bcm6318_funcs[selector].name;
+}
+
+static int bcm6318_pinctrl_get_groups(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ *groups = bcm6318_funcs[selector].groups;
+ *num_groups = bcm6318_funcs[selector].num_groups;
+
+ return 0;
+}
+
+static inline void bcm6318_rmw_mux(struct bcm63xx_pinctrl *pc, unsigned pin,
+ unsigned int mode, unsigned int mux)
+{
+ if (pin < BCM63XX_BANK_GPIOS)
+ regmap_update_bits(pc->regs, BCM6318_MODE_REG, BIT(pin),
+ mode ? BIT(pin) : 0);
+
+ if (pin < BCM6318_NUM_MUX)
+ regmap_update_bits(pc->regs,
+ bcm6318_mux_off(pin),
+ BCM6328_MUX_MASK << ((pin % 16) * 2),
+ mux << ((pin % 16) * 2));
+}
+
+static inline void bcm6318_set_pad(struct bcm63xx_pinctrl *pc, unsigned pin,
+ uint8_t val)
+{
+ regmap_update_bits(pc->regs, bcm6318_pad_off(pin),
+ BCM6328_PAD_MASK << ((pin % 8) * 4),
+ val << ((pin % 8) * 4));
+}
+
+static int bcm6318_pinctrl_set_mux(struct pinctrl_dev *pctldev,
+ unsigned selector, unsigned group)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ const struct bcm6318_pingroup *pg = &bcm6318_groups[group];
+ const struct bcm6318_function *f = &bcm6318_funcs[selector];
+
+ bcm6318_rmw_mux(pc, pg->pins[0], f->mode_val, f->mux_val);
+
+ return 0;
+}
+
+static int bcm6318_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+
+ /* disable all functions using this pin */
+ if (offset < 13) {
+ /* GPIOs 0-12 use mux 0 as GPIO function */
+ bcm6318_rmw_mux(pc, offset, 0, 0);
+ } else if (offset < 42) {
+ /* GPIOs 13-41 use mux 3 as GPIO function */
+ bcm6318_rmw_mux(pc, offset, 0, 3);
+
+ bcm6318_set_pad(pc, offset, 0);
+ }
+
+ return 0;
+}
+
+static struct pinctrl_ops bcm6318_pctl_ops = {
+ .dt_free_map = pinctrl_utils_free_map,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .get_group_name = bcm6318_pinctrl_get_group_name,
+ .get_group_pins = bcm6318_pinctrl_get_group_pins,
+ .get_groups_count = bcm6318_pinctrl_get_group_count,
+};
+
+static struct pinmux_ops bcm6318_pmx_ops = {
+ .get_function_groups = bcm6318_pinctrl_get_groups,
+ .get_function_name = bcm6318_pinctrl_get_func_name,
+ .get_functions_count = bcm6318_pinctrl_get_func_count,
+ .gpio_request_enable = bcm6318_gpio_request_enable,
+ .set_mux = bcm6318_pinctrl_set_mux,
+ .strict = true,
+};
+
+static const struct bcm63xx_pinctrl_soc bcm6318_soc = {
+ .ngpios = BCM6318_NUM_GPIOS,
+ .npins = ARRAY_SIZE(bcm6318_pins),
+ .pctl_ops = &bcm6318_pctl_ops,
+ .pins = bcm6318_pins,
+ .pmx_ops = &bcm6318_pmx_ops,
+};
+
+static int bcm6318_pinctrl_probe(struct platform_device *pdev)
+{
+ return bcm63xx_pinctrl_probe(pdev, &bcm6318_soc, NULL);
+}
+
+static const struct of_device_id bcm6318_pinctrl_match[] = {
+ { .compatible = "brcm,bcm6318-pinctrl", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver bcm6318_pinctrl_driver = {
+ .probe = bcm6318_pinctrl_probe,
+ .driver = {
+ .name = "bcm6318-pinctrl",
+ .of_match_table = bcm6318_pinctrl_match,
+ },
+};
+
+builtin_platform_driver(bcm6318_pinctrl_driver);
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 47+ messages in thread