[PATCH v2 00/16] clk: st: embed clock outputs within drivers

[PATCH v2 00/16] clk: st: embed clock outputs within drivers

[Alain Volmat]

Most of ST clock drivers used by STi platform are updated in
order to introduce clock outputs informations within each drivers
and thus allow to avoid having to rely on clock-output-names properties
within DT clock nodes.
For that purpose, drivers are updated to allow handling both modes
(with or without clock-output-names).
Once all DT will have been updated, the legacy mode could be removed
from the drivers.
This will also allow, once all STi DT will be corrected, to remove the
of_clk_detect_critical API from clk core code since STi clock drivers
are the only drivers using this API.

This serie also contains modifications within STi DTS in order to use
the newly introduced compatible and remove clock-output-names
properties.

Alain Volmat (16):
  clk: st: clkgen-pll: remove used variable of struct clkgen_pll
  clk: st: flexgen: embed soc clock outputs within compatible data
  dt-bindings: clock: st: flexgen: add new introduced compatible
  clk: st: clkgen-pll: embed soc clock outputs within compatible data
  dt-bindings: clock: st: clkgen-pll: add new introduced compatible
  clk: st: clkgen-fsyn: embed soc clock outputs within compatible data
  dt-bindings: clock: st: clkgen-fsyn: add new introduced compatible
  ARM: dts: sti: update flexgen compatible within stih418-clock
  ARM: dts: sti: update flexgen compatible within stih407-clock
  ARM: dts: sti: update flexgen compatible within stih410-clock
  ARM: dts: sti: update clkgen-pll entries in stih407-clock
  ARM: dts: sti: update clkgen-pll entries in stih410-clock
  ARM: dts: sti: update clkgen-pll entries in stih418-clock
  ARM: dts: sti: update clkgen-fsyn entries in stih407-clock
  ARM: dts: sti: update clkgen-fsyn entries in stih410-clock
  ARM: dts: sti: update clkgen-fsyn entries in stih418-clock

 .../bindings/clock/st/st,clkgen-pll.txt       |   3 +
 .../bindings/clock/st/st,flexgen.txt          |  10 +
 .../bindings/clock/st/st,quadfs.txt           |   3 +
 arch/arm/boot/dts/stih407-clock.dtsi          | 128 +------
 arch/arm/boot/dts/stih410-clock.dtsi          | 138 +------
 arch/arm/boot/dts/stih418-clock.dtsi          | 136 +------
 drivers/clk/st/clk-flexgen.c                  | 344 +++++++++++++++++-
 drivers/clk/st/clkgen-fsyn.c                  | 113 +++++-
 drivers/clk/st/clkgen-pll.c                   | 121 +++++-
 9 files changed, 588 insertions(+), 408 deletions(-)

---
v2: fix drivers to update some clocks as CLK_IS_CRITICAL

-- 
2.17.1

[PATCH v2 00/16] clk: st: embed clock outputs within drivers

[Alain Volmat]

Most of ST clock drivers used by STi platform are updated in
order to introduce clock outputs informations within each drivers
and thus allow to avoid having to rely on clock-output-names properties
within DT clock nodes.
For that purpose, drivers are updated to allow handling both modes
(with or without clock-output-names).
Once all DT will have been updated, the legacy mode could be removed
from the drivers.
This will also allow, once all STi DT will be corrected, to remove the
of_clk_detect_critical API from clk core code since STi clock drivers
are the only drivers using this API.

This serie also contains modifications within STi DTS in order to use
the newly introduced compatible and remove clock-output-names
properties.

Alain Volmat (16):
  clk: st: clkgen-pll: remove used variable of struct clkgen_pll
  clk: st: flexgen: embed soc clock outputs within compatible data
  dt-bindings: clock: st: flexgen: add new introduced compatible
  clk: st: clkgen-pll: embed soc clock outputs within compatible data
  dt-bindings: clock: st: clkgen-pll: add new introduced compatible
  clk: st: clkgen-fsyn: embed soc clock outputs within compatible data
  dt-bindings: clock: st: clkgen-fsyn: add new introduced compatible
  ARM: dts: sti: update flexgen compatible within stih418-clock
  ARM: dts: sti: update flexgen compatible within stih407-clock
  ARM: dts: sti: update flexgen compatible within stih410-clock
  ARM: dts: sti: update clkgen-pll entries in stih407-clock
  ARM: dts: sti: update clkgen-pll entries in stih410-clock
  ARM: dts: sti: update clkgen-pll entries in stih418-clock
  ARM: dts: sti: update clkgen-fsyn entries in stih407-clock
  ARM: dts: sti: update clkgen-fsyn entries in stih410-clock
  ARM: dts: sti: update clkgen-fsyn entries in stih418-clock

 .../bindings/clock/st/st,clkgen-pll.txt       |   3 +
 .../bindings/clock/st/st,flexgen.txt          |  10 +
 .../bindings/clock/st/st,quadfs.txt           |   3 +
 arch/arm/boot/dts/stih407-clock.dtsi          | 128 +------
 arch/arm/boot/dts/stih410-clock.dtsi          | 138 +------
 arch/arm/boot/dts/stih418-clock.dtsi          | 136 +------
 drivers/clk/st/clk-flexgen.c                  | 344 +++++++++++++++++-
 drivers/clk/st/clkgen-fsyn.c                  | 113 +++++-
 drivers/clk/st/clkgen-pll.c                   | 121 +++++-
 9 files changed, 588 insertions(+), 408 deletions(-)

---
v2: fix drivers to update some clocks as CLK_IS_CRITICAL

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 01/16] clk: st: clkgen-pll: remove used variable of struct clkgen_pll

[Alain Volmat]

ODF field within the struct clkgen_pll is never used by the driver
and can thus be removed.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 drivers/clk/st/clkgen-pll.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
index 119c5b33080c..f6c56ca90c7d 100644
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
@@ -146,7 +146,6 @@ struct clkgen_pll {
 
 	u32 ndiv;
 	u32 idf;
-	u32 odf;
 	u32 cp;
 };
 
-- 
2.17.1

[PATCH v2 01/16] clk: st: clkgen-pll: remove used variable of struct clkgen_pll

[Alain Volmat]

ODF field within the struct clkgen_pll is never used by the driver
and can thus be removed.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 drivers/clk/st/clkgen-pll.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
index 119c5b33080c..f6c56ca90c7d 100644
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
@@ -146,7 +146,6 @@ struct clkgen_pll {
 
 	u32 ndiv;
 	u32 idf;
-	u32 odf;
 	u32 cp;
 };
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 02/16] clk: st: flexgen: embed soc clock outputs within compatible data

[Alain Volmat]

In order to avoid relying on the old style description via the DT
clock-output-names, add compatible data describing the flexgen
outputs clocks for all STiH407/STiH410 and STiH418 SOCs.

In order to ease transition between the two methods, this commit
introduce the new compatible without removing the old method.
Once DTs will be fixed, the method relying on DT clock-output-names
will be removed from this driver as well as old compatibles.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
v2: add some missing clock as CLK_IS_CRITICAL

 drivers/clk/st/clk-flexgen.c | 344 +++++++++++++++++++++++++++++++++--
 1 file changed, 330 insertions(+), 14 deletions(-)

diff --git a/drivers/clk/st/clk-flexgen.c b/drivers/clk/st/clk-flexgen.c
index 55873d4b7603..24dd0c7dc6c3 100644
--- a/drivers/clk/st/clk-flexgen.c
+++ b/drivers/clk/st/clk-flexgen.c
@@ -16,9 +16,16 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 
+struct clkgen_clk_out {
+	const char *name;
+	unsigned long flags;
+};
+
 struct clkgen_data {
 	unsigned long flags;
 	bool mode;
+	const struct clkgen_clk_out *outputs;
+	const unsigned int outputs_nb;
 };
 
 struct flexgen {
@@ -295,6 +302,267 @@ static const struct clkgen_data clkgen_video = {
 	.mode = 1,
 };
 
+static const struct clkgen_clk_out clkgen_stih407_a0_clk_out[] = {
+	{ .name = "clk-ic-lmi0", .flags = CLK_IS_CRITICAL },
+};
+
+static const struct clkgen_data clkgen_stih407_a0 = {
+	.outputs = clkgen_stih407_a0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih407_a0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih410_a0_clk_out[] = {
+	{ .name = "clk-ic-lmi0", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-ic-lmi1", .flags = CLK_IS_CRITICAL },
+};
+
+static const struct clkgen_data clkgen_stih410_a0 = {
+	.outputs = clkgen_stih410_a0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih410_a0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih407_c0_clk_out[] = {
+	{ .name = "clk-icn-gpu", },
+	{ .name = "clk-fdma", },
+	{ .name = "clk-nand", },
+	{ .name = "clk-hva", },
+	{ .name = "clk-proc-stfe", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-proc-tp", },
+	{ .name = "clk-rx-icn-dmu", },
+	{ .name = "clk-rx-icn-hva", },
+	{ .name = "clk-icn-cpu", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-tx-icn-dmu", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-mmc-0", },
+	{ .name = "clk-mmc-1", },
+	{ .name = "clk-jpegdec", },
+	{ .name = "clk-ext2fa9", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-ic-bdisp-0", },
+	{ .name = "clk-ic-bdisp-1", },
+	{ .name = "clk-pp-dmu", },
+	{ .name = "clk-vid-dmu", },
+	{ .name = "clk-dss-lpc", },
+	{ .name = "clk-st231-aud-0", },
+	{ .name = "clk-st231-gp-1", },
+	{ .name = "clk-st231-dmu", },
+	{ .name = "clk-icn-lmi", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-tx-icn-disp-1", },
+	{ .name = "clk-icn-sbc", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-stfe-frc2", },
+	{ .name = "clk-eth-phy", },
+	{ .name = "clk-eth-ref-phyclk", },
+	{ .name = "clk-flash-promip", },
+	{ .name = "clk-main-disp", },
+	{ .name = "clk-aux-disp", },
+	{ .name = "clk-compo-dvp", },
+};
+
+static const struct clkgen_data clkgen_stih407_c0 = {
+	.outputs = clkgen_stih407_c0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih407_c0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih410_c0_clk_out[] = {
+	{ .name = "clk-icn-gpu", },
+	{ .name = "clk-fdma", },
+	{ .name = "clk-nand", },
+	{ .name = "clk-hva", },
+	{ .name = "clk-proc-stfe", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-proc-tp", },
+	{ .name = "clk-rx-icn-dmu", },
+	{ .name = "clk-rx-icn-hva", },
+	{ .name = "clk-icn-cpu", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-tx-icn-dmu", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-mmc-0", },
+	{ .name = "clk-mmc-1", },
+	{ .name = "clk-jpegdec", },
+	{ .name = "clk-ext2fa9", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-ic-bdisp-0", },
+	{ .name = "clk-ic-bdisp-1", },
+	{ .name = "clk-pp-dmu", },
+	{ .name = "clk-vid-dmu", },
+	{ .name = "clk-dss-lpc", },
+	{ .name = "clk-st231-aud-0", },
+	{ .name = "clk-st231-gp-1", },
+	{ .name = "clk-st231-dmu", },
+	{ .name = "clk-icn-lmi", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-tx-icn-disp-1", },
+	{ .name = "clk-icn-sbc", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-stfe-frc2", },
+	{ .name = "clk-eth-phy", },
+	{ .name = "clk-eth-ref-phyclk", },
+	{ .name = "clk-flash-promip", },
+	{ .name = "clk-main-disp", },
+	{ .name = "clk-aux-disp", },
+	{ .name = "clk-compo-dvp", },
+	{ .name = "clk-tx-icn-hades", },
+	{ .name = "clk-rx-icn-hades", },
+	{ .name = "clk-icn-reg-16", },
+	{ .name = "clk-pp-hades", },
+	{ .name = "clk-clust-hades", },
+	{ .name = "clk-hwpe-hades", },
+	{ .name = "clk-fc-hades", },
+};
+
+static const struct clkgen_data clkgen_stih410_c0 = {
+	.outputs = clkgen_stih410_c0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih410_c0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih418_c0_clk_out[] = {
+	{ .name = "clk-icn-gpu", },
+	{ .name = "clk-fdma", },
+	{ .name = "clk-nand", },
+	{ .name = "clk-hva", },
+	{ .name = "clk-proc-stfe", },
+	{ .name = "clk-tp", },
+	{ .name = "clk-rx-icn-dmu", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-rx-icn-hva", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-icn-cpu", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-tx-icn-dmu", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-mmc-0", },
+	{ .name = "clk-mmc-1", },
+	{ .name = "clk-jpegdec", },
+	{ .name = "clk-icn-reg", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-proc-bdisp-0", },
+	{ .name = "clk-proc-bdisp-1", },
+	{ .name = "clk-pp-dmu", },
+	{ .name = "clk-vid-dmu", },
+	{ .name = "clk-dss-lpc", },
+	{ .name = "clk-st231-aud-0", },
+	{ .name = "clk-st231-gp-1", },
+	{ .name = "clk-st231-dmu", },
+	{ .name = "clk-icn-lmi", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-tx-icn-1", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-icn-sbc", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-stfe-frc2", },
+	{ .name = "clk-eth-phyref", },
+	{ .name = "clk-eth-ref-phyclk", },
+	{ .name = "clk-flash-promip", },
+	{ .name = "clk-main-disp", },
+	{ .name = "clk-aux-disp", },
+	{ .name = "clk-compo-dvp", },
+	{ .name = "clk-tx-icn-hades", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-rx-icn-hades", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-icn-reg-16", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-pp-hevc", },
+	{ .name = "clk-clust-hevc", },
+	{ .name = "clk-hwpe-hevc", },
+	{ .name = "clk-fc-hevc", },
+	{ .name = "clk-proc-mixer", },
+	{ .name = "clk-proc-sc", },
+	{ .name = "clk-avsp-hevc", },
+};
+
+static const struct clkgen_data clkgen_stih418_c0 = {
+	.outputs = clkgen_stih418_c0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih418_c0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih407_d0_clk_out[] = {
+	{ .name = "clk-pcm-0", },
+	{ .name = "clk-pcm-1", },
+	{ .name = "clk-pcm-2", },
+	{ .name = "clk-spdiff", },
+};
+
+static const struct clkgen_data clkgen_stih407_d0 = {
+	.flags = CLK_SET_RATE_PARENT,
+	.outputs = clkgen_stih407_d0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih407_d0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih410_d0_clk_out[] = {
+	{ .name = "clk-pcm-0", },
+	{ .name = "clk-pcm-1", },
+	{ .name = "clk-pcm-2", },
+	{ .name = "clk-spdiff", },
+	{ .name = "clk-pcmr10-master", },
+	{ .name = "clk-usb2-phy", },
+};
+
+static const struct clkgen_data clkgen_stih410_d0 = {
+	.flags = CLK_SET_RATE_PARENT,
+	.outputs = clkgen_stih410_d0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih410_d0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih407_d2_clk_out[] = {
+	{ .name = "clk-pix-main-disp", },
+	{ .name = "clk-pix-pip", },
+	{ .name = "clk-pix-gdp1", },
+	{ .name = "clk-pix-gdp2", },
+	{ .name = "clk-pix-gdp3", },
+	{ .name = "clk-pix-gdp4", },
+	{ .name = "clk-pix-aux-disp", },
+	{ .name = "clk-denc", },
+	{ .name = "clk-pix-hddac", },
+	{ .name = "clk-hddac", },
+	{ .name = "clk-sddac", },
+	{ .name = "clk-pix-dvo", },
+	{ .name = "clk-dvo", },
+	{ .name = "clk-pix-hdmi", },
+	{ .name = "clk-tmds-hdmi", },
+	{ .name = "clk-ref-hdmiphy", },
+};
+
+static const struct clkgen_data clkgen_stih407_d2 = {
+	.outputs = clkgen_stih407_d2_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih407_d2_clk_out),
+	.flags = CLK_SET_RATE_PARENT,
+	.mode = 1,
+};
+
+static const struct clkgen_clk_out clkgen_stih418_d2_clk_out[] = {
+	{ .name = "clk-pix-main-disp", },
+	{ .name = "", },
+	{ .name = "", },
+	{ .name = "", },
+	{ .name = "", },
+	{ .name = "clk-tmds-hdmi-div2", },
+	{ .name = "clk-pix-aux-disp", },
+	{ .name = "clk-denc", },
+	{ .name = "clk-pix-hddac", },
+	{ .name = "clk-hddac", },
+	{ .name = "clk-sddac", },
+	{ .name = "clk-pix-dvo", },
+	{ .name = "clk-dvo", },
+	{ .name = "clk-pix-hdmi", },
+	{ .name = "clk-tmds-hdmi", },
+	{ .name = "clk-ref-hdmiphy", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "clk-vp9", },
+};
+
+static const struct clkgen_data clkgen_stih418_d2 = {
+	.outputs = clkgen_stih418_d2_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih418_d2_clk_out),
+	.flags = CLK_SET_RATE_PARENT,
+	.mode = 1,
+};
+
+static const struct clkgen_clk_out clkgen_stih407_d3_clk_out[] = {
+	{ .name = "clk-stfe-frc1", },
+	{ .name = "clk-tsout-0", },
+	{ .name = "clk-tsout-1", },
+	{ .name = "clk-mchi", },
+	{ .name = "clk-vsens-compo", },
+	{ .name = "clk-frc1-remote", },
+	{ .name = "clk-lpc-0", },
+	{ .name = "clk-lpc-1", },
+};
+
+static const struct clkgen_data clkgen_stih407_d3 = {
+	.outputs = clkgen_stih407_d3_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih407_d3_clk_out),
+};
+
 static const struct of_device_id flexgen_of_match[] = {
 	{
 		.compatible = "st,flexgen-audio",
@@ -304,6 +572,46 @@ static const struct of_device_id flexgen_of_match[] = {
 		.compatible = "st,flexgen-video",
 		.data = &clkgen_video,
 	},
+	{
+		.compatible = "st,flexgen-stih407-a0",
+		.data = &clkgen_stih407_a0,
+	},
+	{
+		.compatible = "st,flexgen-stih410-a0",
+		.data = &clkgen_stih410_a0,
+	},
+	{
+		.compatible = "st,flexgen-stih407-c0",
+		.data = &clkgen_stih407_c0,
+	},
+	{
+		.compatible = "st,flexgen-stih410-c0",
+		.data = &clkgen_stih410_c0,
+	},
+	{
+		.compatible = "st,flexgen-stih418-c0",
+		.data = &clkgen_stih418_c0,
+	},
+	{
+		.compatible = "st,flexgen-stih407-d0",
+		.data = &clkgen_stih407_d0,
+	},
+	{
+		.compatible = "st,flexgen-stih410-d0",
+		.data = &clkgen_stih410_d0,
+	},
+	{
+		.compatible = "st,flexgen-stih407-d2",
+		.data = &clkgen_stih407_d2,
+	},
+	{
+		.compatible = "st,flexgen-stih418-d2",
+		.data = &clkgen_stih418_d2,
+	},
+	{
+		.compatible = "st,flexgen-stih407-d3",
+		.data = &clkgen_stih407_d3,
+	},
 	{}
 };
 
@@ -320,6 +628,7 @@ static void __init st_of_flexgen_setup(struct device_node *np)
 	unsigned long flex_flags = 0;
 	int ret;
 	bool clk_mode = 0;
+	const char *clk_name;
 
 	pnode = of_get_parent(np);
 	if (!pnode)
@@ -347,13 +656,17 @@ static void __init st_of_flexgen_setup(struct device_node *np)
 	if (!clk_data)
 		goto err;
 
-	ret = of_property_count_strings(np, "clock-output-names");
-	if (ret <= 0) {
-		pr_err("%s: Failed to get number of output clocks (%d)",
-				__func__, clk_data->clk_num);
-		goto err;
-	}
-	clk_data->clk_num = ret;
+	/* First try to get output information from the compatible data */
+	if (!data || !data->outputs_nb || !data->outputs) {
+		ret = of_property_count_strings(np, "clock-output-names");
+		if (ret <= 0) {
+			pr_err("%s: Failed to get number of output clocks (%d)",
+					__func__, clk_data->clk_num);
+			goto err;
+		}
+		clk_data->clk_num = ret;
+	} else
+		clk_data->clk_num = data->outputs_nb;
 
 	clk_data->clks = kcalloc(clk_data->clk_num, sizeof(struct clk *),
 			GFP_KERNEL);
@@ -368,16 +681,19 @@ static void __init st_of_flexgen_setup(struct device_node *np)
 
 	for (i = 0; i < clk_data->clk_num; i++) {
 		struct clk *clk;
-		const char *clk_name;
 
-		if (of_property_read_string_index(np, "clock-output-names",
-						  i, &clk_name)) {
-			break;
+		if (!data || !data->outputs_nb || !data->outputs) {
+			if (of_property_read_string_index(np,
+							  "clock-output-names",
+							  i, &clk_name))
+				break;
+			flex_flags &= ~CLK_IS_CRITICAL;
+			of_clk_detect_critical(np, i, &flex_flags);
+		} else {
+			clk_name = data->outputs[i].name;
+			flex_flags = data->flags | data->outputs[i].flags;
 		}
 
-		flex_flags &= ~CLK_IS_CRITICAL;
-		of_clk_detect_critical(np, i, &flex_flags);
-
 		/*
 		 * If we read an empty clock name then the output is unused
 		 */
-- 
2.17.1

[PATCH v2 02/16] clk: st: flexgen: embed soc clock outputs within compatible data

[Alain Volmat]

In order to avoid relying on the old style description via the DT
clock-output-names, add compatible data describing the flexgen
outputs clocks for all STiH407/STiH410 and STiH418 SOCs.

In order to ease transition between the two methods, this commit
introduce the new compatible without removing the old method.
Once DTs will be fixed, the method relying on DT clock-output-names
will be removed from this driver as well as old compatibles.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
v2: add some missing clock as CLK_IS_CRITICAL

 drivers/clk/st/clk-flexgen.c | 344 +++++++++++++++++++++++++++++++++--
 1 file changed, 330 insertions(+), 14 deletions(-)

diff --git a/drivers/clk/st/clk-flexgen.c b/drivers/clk/st/clk-flexgen.c
index 55873d4b7603..24dd0c7dc6c3 100644
--- a/drivers/clk/st/clk-flexgen.c
+++ b/drivers/clk/st/clk-flexgen.c
@@ -16,9 +16,16 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 
+struct clkgen_clk_out {
+	const char *name;
+	unsigned long flags;
+};
+
 struct clkgen_data {
 	unsigned long flags;
 	bool mode;
+	const struct clkgen_clk_out *outputs;
+	const unsigned int outputs_nb;
 };
 
 struct flexgen {
@@ -295,6 +302,267 @@ static const struct clkgen_data clkgen_video = {
 	.mode = 1,
 };
 
+static const struct clkgen_clk_out clkgen_stih407_a0_clk_out[] = {
+	{ .name = "clk-ic-lmi0", .flags = CLK_IS_CRITICAL },
+};
+
+static const struct clkgen_data clkgen_stih407_a0 = {
+	.outputs = clkgen_stih407_a0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih407_a0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih410_a0_clk_out[] = {
+	{ .name = "clk-ic-lmi0", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-ic-lmi1", .flags = CLK_IS_CRITICAL },
+};
+
+static const struct clkgen_data clkgen_stih410_a0 = {
+	.outputs = clkgen_stih410_a0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih410_a0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih407_c0_clk_out[] = {
+	{ .name = "clk-icn-gpu", },
+	{ .name = "clk-fdma", },
+	{ .name = "clk-nand", },
+	{ .name = "clk-hva", },
+	{ .name = "clk-proc-stfe", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-proc-tp", },
+	{ .name = "clk-rx-icn-dmu", },
+	{ .name = "clk-rx-icn-hva", },
+	{ .name = "clk-icn-cpu", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-tx-icn-dmu", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-mmc-0", },
+	{ .name = "clk-mmc-1", },
+	{ .name = "clk-jpegdec", },
+	{ .name = "clk-ext2fa9", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-ic-bdisp-0", },
+	{ .name = "clk-ic-bdisp-1", },
+	{ .name = "clk-pp-dmu", },
+	{ .name = "clk-vid-dmu", },
+	{ .name = "clk-dss-lpc", },
+	{ .name = "clk-st231-aud-0", },
+	{ .name = "clk-st231-gp-1", },
+	{ .name = "clk-st231-dmu", },
+	{ .name = "clk-icn-lmi", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-tx-icn-disp-1", },
+	{ .name = "clk-icn-sbc", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-stfe-frc2", },
+	{ .name = "clk-eth-phy", },
+	{ .name = "clk-eth-ref-phyclk", },
+	{ .name = "clk-flash-promip", },
+	{ .name = "clk-main-disp", },
+	{ .name = "clk-aux-disp", },
+	{ .name = "clk-compo-dvp", },
+};
+
+static const struct clkgen_data clkgen_stih407_c0 = {
+	.outputs = clkgen_stih407_c0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih407_c0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih410_c0_clk_out[] = {
+	{ .name = "clk-icn-gpu", },
+	{ .name = "clk-fdma", },
+	{ .name = "clk-nand", },
+	{ .name = "clk-hva", },
+	{ .name = "clk-proc-stfe", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-proc-tp", },
+	{ .name = "clk-rx-icn-dmu", },
+	{ .name = "clk-rx-icn-hva", },
+	{ .name = "clk-icn-cpu", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-tx-icn-dmu", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-mmc-0", },
+	{ .name = "clk-mmc-1", },
+	{ .name = "clk-jpegdec", },
+	{ .name = "clk-ext2fa9", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-ic-bdisp-0", },
+	{ .name = "clk-ic-bdisp-1", },
+	{ .name = "clk-pp-dmu", },
+	{ .name = "clk-vid-dmu", },
+	{ .name = "clk-dss-lpc", },
+	{ .name = "clk-st231-aud-0", },
+	{ .name = "clk-st231-gp-1", },
+	{ .name = "clk-st231-dmu", },
+	{ .name = "clk-icn-lmi", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-tx-icn-disp-1", },
+	{ .name = "clk-icn-sbc", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-stfe-frc2", },
+	{ .name = "clk-eth-phy", },
+	{ .name = "clk-eth-ref-phyclk", },
+	{ .name = "clk-flash-promip", },
+	{ .name = "clk-main-disp", },
+	{ .name = "clk-aux-disp", },
+	{ .name = "clk-compo-dvp", },
+	{ .name = "clk-tx-icn-hades", },
+	{ .name = "clk-rx-icn-hades", },
+	{ .name = "clk-icn-reg-16", },
+	{ .name = "clk-pp-hades", },
+	{ .name = "clk-clust-hades", },
+	{ .name = "clk-hwpe-hades", },
+	{ .name = "clk-fc-hades", },
+};
+
+static const struct clkgen_data clkgen_stih410_c0 = {
+	.outputs = clkgen_stih410_c0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih410_c0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih418_c0_clk_out[] = {
+	{ .name = "clk-icn-gpu", },
+	{ .name = "clk-fdma", },
+	{ .name = "clk-nand", },
+	{ .name = "clk-hva", },
+	{ .name = "clk-proc-stfe", },
+	{ .name = "clk-tp", },
+	{ .name = "clk-rx-icn-dmu", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-rx-icn-hva", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-icn-cpu", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-tx-icn-dmu", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-mmc-0", },
+	{ .name = "clk-mmc-1", },
+	{ .name = "clk-jpegdec", },
+	{ .name = "clk-icn-reg", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-proc-bdisp-0", },
+	{ .name = "clk-proc-bdisp-1", },
+	{ .name = "clk-pp-dmu", },
+	{ .name = "clk-vid-dmu", },
+	{ .name = "clk-dss-lpc", },
+	{ .name = "clk-st231-aud-0", },
+	{ .name = "clk-st231-gp-1", },
+	{ .name = "clk-st231-dmu", },
+	{ .name = "clk-icn-lmi", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-tx-icn-1", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-icn-sbc", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-stfe-frc2", },
+	{ .name = "clk-eth-phyref", },
+	{ .name = "clk-eth-ref-phyclk", },
+	{ .name = "clk-flash-promip", },
+	{ .name = "clk-main-disp", },
+	{ .name = "clk-aux-disp", },
+	{ .name = "clk-compo-dvp", },
+	{ .name = "clk-tx-icn-hades", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-rx-icn-hades", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-icn-reg-16", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-pp-hevc", },
+	{ .name = "clk-clust-hevc", },
+	{ .name = "clk-hwpe-hevc", },
+	{ .name = "clk-fc-hevc", },
+	{ .name = "clk-proc-mixer", },
+	{ .name = "clk-proc-sc", },
+	{ .name = "clk-avsp-hevc", },
+};
+
+static const struct clkgen_data clkgen_stih418_c0 = {
+	.outputs = clkgen_stih418_c0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih418_c0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih407_d0_clk_out[] = {
+	{ .name = "clk-pcm-0", },
+	{ .name = "clk-pcm-1", },
+	{ .name = "clk-pcm-2", },
+	{ .name = "clk-spdiff", },
+};
+
+static const struct clkgen_data clkgen_stih407_d0 = {
+	.flags = CLK_SET_RATE_PARENT,
+	.outputs = clkgen_stih407_d0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih407_d0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih410_d0_clk_out[] = {
+	{ .name = "clk-pcm-0", },
+	{ .name = "clk-pcm-1", },
+	{ .name = "clk-pcm-2", },
+	{ .name = "clk-spdiff", },
+	{ .name = "clk-pcmr10-master", },
+	{ .name = "clk-usb2-phy", },
+};
+
+static const struct clkgen_data clkgen_stih410_d0 = {
+	.flags = CLK_SET_RATE_PARENT,
+	.outputs = clkgen_stih410_d0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih410_d0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih407_d2_clk_out[] = {
+	{ .name = "clk-pix-main-disp", },
+	{ .name = "clk-pix-pip", },
+	{ .name = "clk-pix-gdp1", },
+	{ .name = "clk-pix-gdp2", },
+	{ .name = "clk-pix-gdp3", },
+	{ .name = "clk-pix-gdp4", },
+	{ .name = "clk-pix-aux-disp", },
+	{ .name = "clk-denc", },
+	{ .name = "clk-pix-hddac", },
+	{ .name = "clk-hddac", },
+	{ .name = "clk-sddac", },
+	{ .name = "clk-pix-dvo", },
+	{ .name = "clk-dvo", },
+	{ .name = "clk-pix-hdmi", },
+	{ .name = "clk-tmds-hdmi", },
+	{ .name = "clk-ref-hdmiphy", },
+};
+
+static const struct clkgen_data clkgen_stih407_d2 = {
+	.outputs = clkgen_stih407_d2_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih407_d2_clk_out),
+	.flags = CLK_SET_RATE_PARENT,
+	.mode = 1,
+};
+
+static const struct clkgen_clk_out clkgen_stih418_d2_clk_out[] = {
+	{ .name = "clk-pix-main-disp", },
+	{ .name = "", },
+	{ .name = "", },
+	{ .name = "", },
+	{ .name = "", },
+	{ .name = "clk-tmds-hdmi-div2", },
+	{ .name = "clk-pix-aux-disp", },
+	{ .name = "clk-denc", },
+	{ .name = "clk-pix-hddac", },
+	{ .name = "clk-hddac", },
+	{ .name = "clk-sddac", },
+	{ .name = "clk-pix-dvo", },
+	{ .name = "clk-dvo", },
+	{ .name = "clk-pix-hdmi", },
+	{ .name = "clk-tmds-hdmi", },
+	{ .name = "clk-ref-hdmiphy", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "clk-vp9", },
+};
+
+static const struct clkgen_data clkgen_stih418_d2 = {
+	.outputs = clkgen_stih418_d2_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih418_d2_clk_out),
+	.flags = CLK_SET_RATE_PARENT,
+	.mode = 1,
+};
+
+static const struct clkgen_clk_out clkgen_stih407_d3_clk_out[] = {
+	{ .name = "clk-stfe-frc1", },
+	{ .name = "clk-tsout-0", },
+	{ .name = "clk-tsout-1", },
+	{ .name = "clk-mchi", },
+	{ .name = "clk-vsens-compo", },
+	{ .name = "clk-frc1-remote", },
+	{ .name = "clk-lpc-0", },
+	{ .name = "clk-lpc-1", },
+};
+
+static const struct clkgen_data clkgen_stih407_d3 = {
+	.outputs = clkgen_stih407_d3_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih407_d3_clk_out),
+};
+
 static const struct of_device_id flexgen_of_match[] = {
 	{
 		.compatible = "st,flexgen-audio",
@@ -304,6 +572,46 @@ static const struct of_device_id flexgen_of_match[] = {
 		.compatible = "st,flexgen-video",
 		.data = &clkgen_video,
 	},
+	{
+		.compatible = "st,flexgen-stih407-a0",
+		.data = &clkgen_stih407_a0,
+	},
+	{
+		.compatible = "st,flexgen-stih410-a0",
+		.data = &clkgen_stih410_a0,
+	},
+	{
+		.compatible = "st,flexgen-stih407-c0",
+		.data = &clkgen_stih407_c0,
+	},
+	{
+		.compatible = "st,flexgen-stih410-c0",
+		.data = &clkgen_stih410_c0,
+	},
+	{
+		.compatible = "st,flexgen-stih418-c0",
+		.data = &clkgen_stih418_c0,
+	},
+	{
+		.compatible = "st,flexgen-stih407-d0",
+		.data = &clkgen_stih407_d0,
+	},
+	{
+		.compatible = "st,flexgen-stih410-d0",
+		.data = &clkgen_stih410_d0,
+	},
+	{
+		.compatible = "st,flexgen-stih407-d2",
+		.data = &clkgen_stih407_d2,
+	},
+	{
+		.compatible = "st,flexgen-stih418-d2",
+		.data = &clkgen_stih418_d2,
+	},
+	{
+		.compatible = "st,flexgen-stih407-d3",
+		.data = &clkgen_stih407_d3,
+	},
 	{}
 };
 
@@ -320,6 +628,7 @@ static void __init st_of_flexgen_setup(struct device_node *np)
 	unsigned long flex_flags = 0;
 	int ret;
 	bool clk_mode = 0;
+	const char *clk_name;
 
 	pnode = of_get_parent(np);
 	if (!pnode)
@@ -347,13 +656,17 @@ static void __init st_of_flexgen_setup(struct device_node *np)
 	if (!clk_data)
 		goto err;
 
-	ret = of_property_count_strings(np, "clock-output-names");
-	if (ret <= 0) {
-		pr_err("%s: Failed to get number of output clocks (%d)",
-				__func__, clk_data->clk_num);
-		goto err;
-	}
-	clk_data->clk_num = ret;
+	/* First try to get output information from the compatible data */
+	if (!data || !data->outputs_nb || !data->outputs) {
+		ret = of_property_count_strings(np, "clock-output-names");
+		if (ret <= 0) {
+			pr_err("%s: Failed to get number of output clocks (%d)",
+					__func__, clk_data->clk_num);
+			goto err;
+		}
+		clk_data->clk_num = ret;
+	} else
+		clk_data->clk_num = data->outputs_nb;
 
 	clk_data->clks = kcalloc(clk_data->clk_num, sizeof(struct clk *),
 			GFP_KERNEL);
@@ -368,16 +681,19 @@ static void __init st_of_flexgen_setup(struct device_node *np)
 
 	for (i = 0; i < clk_data->clk_num; i++) {
 		struct clk *clk;
-		const char *clk_name;
 
-		if (of_property_read_string_index(np, "clock-output-names",
-						  i, &clk_name)) {
-			break;
+		if (!data || !data->outputs_nb || !data->outputs) {
+			if (of_property_read_string_index(np,
+							  "clock-output-names",
+							  i, &clk_name))
+				break;
+			flex_flags &= ~CLK_IS_CRITICAL;
+			of_clk_detect_critical(np, i, &flex_flags);
+		} else {
+			clk_name = data->outputs[i].name;
+			flex_flags = data->flags | data->outputs[i].flags;
 		}
 
-		flex_flags &= ~CLK_IS_CRITICAL;
-		of_clk_detect_critical(np, i, &flex_flags);
-
 		/*
 		 * If we read an empty clock name then the output is unused
 		 */
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 03/16] dt-bindings: clock: st: flexgen: add new introduced compatible

[Alain Volmat]

New compatible are added, supporting various kind of flexgen in
STiH407, STiH410 and STiH418

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 .../devicetree/bindings/clock/st/st,flexgen.txt        | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
index 7ff77fc57dff..55a18939bddd 100644
--- a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
@@ -64,6 +64,16 @@ Required properties:
   audio use case)
   "st,flexgen-video", "st,flexgen" (enable clock propagation on parent
 					and activate synchronous mode)
+  "st,flexgen-stih407-a0"
+  "st,flexgen-stih410-a0"
+  "st,flexgen-stih407-c0"
+  "st,flexgen-stih410-c0"
+  "st,flexgen-stih418-c0"
+  "st,flexgen-stih407-d0"
+  "st,flexgen-stih410-d0"
+  "st,flexgen-stih407-d2"
+  "st,flexgen-stih418-d2"
+  "st,flexgen-stih407-d3"
 
 - #clock-cells : from common clock binding; shall be set to 1 (multiple clock
   outputs).
-- 
2.17.1

[PATCH v2 03/16] dt-bindings: clock: st: flexgen: add new introduced compatible

[Alain Volmat]

New compatible are added, supporting various kind of flexgen in
STiH407, STiH410 and STiH418

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 .../devicetree/bindings/clock/st/st,flexgen.txt        | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
index 7ff77fc57dff..55a18939bddd 100644
--- a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
@@ -64,6 +64,16 @@ Required properties:
   audio use case)
   "st,flexgen-video", "st,flexgen" (enable clock propagation on parent
 					and activate synchronous mode)
+  "st,flexgen-stih407-a0"
+  "st,flexgen-stih410-a0"
+  "st,flexgen-stih407-c0"
+  "st,flexgen-stih410-c0"
+  "st,flexgen-stih418-c0"
+  "st,flexgen-stih407-d0"
+  "st,flexgen-stih410-d0"
+  "st,flexgen-stih407-d2"
+  "st,flexgen-stih418-d2"
+  "st,flexgen-stih407-d3"
 
 - #clock-cells : from common clock binding; shall be set to 1 (multiple clock
   outputs).
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 04/16] clk: st: clkgen-pll: embed soc clock outputs within compatible data

[Alain Volmat]

In order to avoid relying on the old style description via the DT
clock-output-names, add compatible data describing the flexgen
outputs clocks for all STiH407/STiH410 and STiH418 SOCs.

In order to ease transition between the two methods, this commit
introduce the new compatible without removing the old method.
Once DTs will be fixed, the method relying on DT clock-output-names
will be removed from this driver as well as old compatibles.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
v2: clk-s-a0-pll-odf-0 don't need to be CLK_IS_CRITICAL
    mark several clock as CLK_IS_CRITICAL

 drivers/clk/st/clkgen-pll.c | 120 +++++++++++++++++++++++++++++++-----
 1 file changed, 106 insertions(+), 14 deletions(-)

diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
index f6c56ca90c7d..8c6215b3c808 100644
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
@@ -57,6 +57,17 @@ struct clkgen_pll_data {
 	const struct clk_ops *ops;
 };
 
+struct clkgen_clk_out {
+	const char *name;
+	unsigned long flags;
+};
+
+struct clkgen_pll_data_clks {
+	struct clkgen_pll_data *data;
+	const struct clkgen_clk_out *outputs;
+};
+
+
 static const struct clk_ops stm_pll3200c32_ops;
 static const struct clk_ops stm_pll3200c32_a9_ops;
 static const struct clk_ops stm_pll4600c28_ops;
@@ -74,6 +85,28 @@ static const struct clkgen_pll_data st_pll3200c32_cx_0 = {
 	.ops		= &stm_pll3200c32_ops,
 };
 
+static const struct clkgen_pll_data_clks st_pll3200c32_cx_0_legacy_data = {
+	.data	= (struct clkgen_pll_data *)&st_pll3200c32_cx_0,
+};
+
+static const struct clkgen_clk_out st_pll3200c32_ax_0_clks[] = {
+	{ .name = "clk-s-a0-pll-odf-0", },
+};
+
+static const struct clkgen_pll_data_clks st_pll3200c32_a0_data = {
+	.data		= (struct clkgen_pll_data *)&st_pll3200c32_cx_0,
+	.outputs	= st_pll3200c32_ax_0_clks,
+};
+
+static const struct clkgen_clk_out st_pll3200c32_cx_0_clks[] = {
+	{ .name = "clk-s-c0-pll0-odf-0",	.flags = CLK_IS_CRITICAL },
+};
+
+static const struct clkgen_pll_data_clks st_pll3200c32_c0_data = {
+	.data		= (struct clkgen_pll_data *)&st_pll3200c32_cx_0,
+	.outputs	= st_pll3200c32_cx_0_clks,
+};
+
 static const struct clkgen_pll_data st_pll3200c32_cx_1 = {
 	/* 407 C0 PLL1 */
 	.pdn_status	= CLKGEN_FIELD(0x2c8,	0x1,			8),
@@ -87,6 +120,19 @@ static const struct clkgen_pll_data st_pll3200c32_cx_1 = {
 	.ops		= &stm_pll3200c32_ops,
 };
 
+static const struct clkgen_pll_data_clks st_pll3200c32_cx_1_legacy_data = {
+	.data	= (struct clkgen_pll_data *)&st_pll3200c32_cx_1,
+};
+
+static const struct clkgen_clk_out st_pll3200c32_cx_1_clks[] = {
+	{ .name = "clk-s-c0-pll1-odf-0",	.flags = CLK_IS_CRITICAL },
+};
+
+static const struct clkgen_pll_data_clks st_pll3200c32_c1_data = {
+	.data		= (struct clkgen_pll_data *)&st_pll3200c32_cx_1,
+	.outputs	= st_pll3200c32_cx_1_clks,
+};
+
 static const struct clkgen_pll_data st_pll3200c32_407_a9 = {
 	/* 407 A9 */
 	.pdn_status	= CLKGEN_FIELD(0x1a8,	0x1,			0),
@@ -104,6 +150,15 @@ static const struct clkgen_pll_data st_pll3200c32_407_a9 = {
 	.ops		= &stm_pll3200c32_a9_ops,
 };
 
+static const struct clkgen_clk_out st_pll3200c32_407_a9_clks[] = {
+	{ .name = "clockgen-a9-pll-odf",	.flags = CLK_IS_CRITICAL },
+};
+
+static const struct clkgen_pll_data_clks st_pll3200c32_407_a9_data = {
+	.data		= (struct clkgen_pll_data *)&st_pll3200c32_407_a9,
+	.outputs	= st_pll3200c32_407_a9_clks,
+};
+
 static struct clkgen_pll_data st_pll4600c28_418_a9 = {
 	/* 418 A9 */
 	.pdn_status	= CLKGEN_FIELD(0x1a8,	0x1,			0),
@@ -120,6 +175,15 @@ static struct clkgen_pll_data st_pll4600c28_418_a9 = {
 	.ops		= &stm_pll4600c28_ops,
 };
 
+static const struct clkgen_clk_out st_pll4600c28_418_a9_clks[] = {
+	{ .name = "clockgen-a9-pll-odf", },
+};
+
+static const struct clkgen_pll_data_clks st_pll4600c28_418_a9_data = {
+	.data		= (struct clkgen_pll_data *)&st_pll4600c28_418_a9,
+	.outputs	= st_pll4600c28_418_a9_clks,
+};
+
 /**
  * DOC: Clock Generated by PLL, rate set and enabled by bootloader
  *
@@ -684,7 +748,7 @@ static struct clk * __init clkgen_odf_register(const char *parent_name,
 
 
 static void __init clkgen_c32_pll_setup(struct device_node *np,
-		struct clkgen_pll_data *data)
+		struct clkgen_pll_data_clks *datac)
 {
 	struct clk *clk;
 	const char *parent_name, *pll_name;
@@ -704,14 +768,14 @@ static void __init clkgen_c32_pll_setup(struct device_node *np,
 
 	of_clk_detect_critical(np, 0, &pll_flags);
 
-	clk = clkgen_pll_register(parent_name, data, pll_base, pll_flags,
-				  np->name, data->lock);
+	clk = clkgen_pll_register(parent_name, datac->data, pll_base, pll_flags,
+				  np->name, datac->data->lock);
 	if (IS_ERR(clk))
 		return;
 
 	pll_name = __clk_get_name(clk);
 
-	num_odfs = data->num_odfs;
+	num_odfs = datac->data->num_odfs;
 
 	clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
 	if (!clk_data)
@@ -729,14 +793,21 @@ static void __init clkgen_c32_pll_setup(struct device_node *np,
 		const char *clk_name;
 		unsigned long odf_flags = 0;
 
-		if (of_property_read_string_index(np, "clock-output-names",
-						  odf, &clk_name))
-			return;
+		if (datac->outputs) {
+			clk_name = datac->outputs[odf].name;
+			odf_flags = datac->outputs[odf].flags;
+		} else {
+			if (of_property_read_string_index(np,
+							  "clock-output-names",
+							  odf, &clk_name))
+				return;
 
-		of_clk_detect_critical(np, odf, &odf_flags);
+			of_clk_detect_critical(np, odf, &odf_flags);
+		}
 
-		clk = clkgen_odf_register(pll_name, pll_base, data, odf_flags,
-				odf, &clkgena_c32_odf_lock, clk_name);
+		clk = clkgen_odf_register(pll_name, pll_base, datac->data,
+				odf_flags, odf, &clkgena_c32_odf_lock,
+				clk_name);
 		if (IS_ERR(clk))
 			goto err;
 
@@ -754,27 +825,48 @@ static void __init clkgen_c32_pll_setup(struct device_node *np,
 static void __init clkgen_c32_pll0_setup(struct device_node *np)
 {
 	clkgen_c32_pll_setup(np,
-			(struct clkgen_pll_data *) &st_pll3200c32_cx_0);
+		(struct clkgen_pll_data_clks *) &st_pll3200c32_cx_0_legacy_data);
 }
 CLK_OF_DECLARE(c32_pll0, "st,clkgen-pll0", clkgen_c32_pll0_setup);
 
+static void __init clkgen_c32_pll0_a0_setup(struct device_node *np)
+{
+	clkgen_c32_pll_setup(np,
+		(struct clkgen_pll_data_clks *) &st_pll3200c32_a0_data);
+}
+CLK_OF_DECLARE(c32_pll0_a0, "st,clkgen-pll0-a0", clkgen_c32_pll0_a0_setup);
+
+static void __init clkgen_c32_pll0_c0_setup(struct device_node *np)
+{
+	clkgen_c32_pll_setup(np,
+		(struct clkgen_pll_data_clks *) &st_pll3200c32_c0_data);
+}
+CLK_OF_DECLARE(c32_pll0_c0, "st,clkgen-pll0-c0", clkgen_c32_pll0_c0_setup);
+
 static void __init clkgen_c32_pll1_setup(struct device_node *np)
 {
 	clkgen_c32_pll_setup(np,
-			(struct clkgen_pll_data *) &st_pll3200c32_cx_1);
+		(struct clkgen_pll_data_clks *) &st_pll3200c32_cx_1_legacy_data);
 }
 CLK_OF_DECLARE(c32_pll1, "st,clkgen-pll1", clkgen_c32_pll1_setup);
 
+static void __init clkgen_c32_pll1_c0_setup(struct device_node *np)
+{
+	clkgen_c32_pll_setup(np,
+		(struct clkgen_pll_data_clks *) &st_pll3200c32_c1_data);
+}
+CLK_OF_DECLARE(c32_pll1_c0, "st,clkgen-pll1-c0", clkgen_c32_pll1_c0_setup);
+
 static void __init clkgen_c32_plla9_setup(struct device_node *np)
 {
 	clkgen_c32_pll_setup(np,
-			(struct clkgen_pll_data *) &st_pll3200c32_407_a9);
+		(struct clkgen_pll_data_clks *) &st_pll3200c32_407_a9_data);
 }
 CLK_OF_DECLARE(c32_plla9, "st,stih407-clkgen-plla9", clkgen_c32_plla9_setup);
 
 static void __init clkgen_c28_plla9_setup(struct device_node *np)
 {
 	clkgen_c32_pll_setup(np,
-			(struct clkgen_pll_data *) &st_pll4600c28_418_a9);
+		(struct clkgen_pll_data_clks *) &st_pll4600c28_418_a9_data);
 }
 CLK_OF_DECLARE(c28_plla9, "st,stih418-clkgen-plla9", clkgen_c28_plla9_setup);
-- 
2.17.1

[PATCH v2 04/16] clk: st: clkgen-pll: embed soc clock outputs within compatible data

[Alain Volmat]

In order to avoid relying on the old style description via the DT
clock-output-names, add compatible data describing the flexgen
outputs clocks for all STiH407/STiH410 and STiH418 SOCs.

In order to ease transition between the two methods, this commit
introduce the new compatible without removing the old method.
Once DTs will be fixed, the method relying on DT clock-output-names
will be removed from this driver as well as old compatibles.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
v2: clk-s-a0-pll-odf-0 don't need to be CLK_IS_CRITICAL
    mark several clock as CLK_IS_CRITICAL

 drivers/clk/st/clkgen-pll.c | 120 +++++++++++++++++++++++++++++++-----
 1 file changed, 106 insertions(+), 14 deletions(-)

diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
index f6c56ca90c7d..8c6215b3c808 100644
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
@@ -57,6 +57,17 @@ struct clkgen_pll_data {
 	const struct clk_ops *ops;
 };
 
+struct clkgen_clk_out {
+	const char *name;
+	unsigned long flags;
+};
+
+struct clkgen_pll_data_clks {
+	struct clkgen_pll_data *data;
+	const struct clkgen_clk_out *outputs;
+};
+
+
 static const struct clk_ops stm_pll3200c32_ops;
 static const struct clk_ops stm_pll3200c32_a9_ops;
 static const struct clk_ops stm_pll4600c28_ops;
@@ -74,6 +85,28 @@ static const struct clkgen_pll_data st_pll3200c32_cx_0 = {
 	.ops		= &stm_pll3200c32_ops,
 };
 
+static const struct clkgen_pll_data_clks st_pll3200c32_cx_0_legacy_data = {
+	.data	= (struct clkgen_pll_data *)&st_pll3200c32_cx_0,
+};
+
+static const struct clkgen_clk_out st_pll3200c32_ax_0_clks[] = {
+	{ .name = "clk-s-a0-pll-odf-0", },
+};
+
+static const struct clkgen_pll_data_clks st_pll3200c32_a0_data = {
+	.data		= (struct clkgen_pll_data *)&st_pll3200c32_cx_0,
+	.outputs	= st_pll3200c32_ax_0_clks,
+};
+
+static const struct clkgen_clk_out st_pll3200c32_cx_0_clks[] = {
+	{ .name = "clk-s-c0-pll0-odf-0",	.flags = CLK_IS_CRITICAL },
+};
+
+static const struct clkgen_pll_data_clks st_pll3200c32_c0_data = {
+	.data		= (struct clkgen_pll_data *)&st_pll3200c32_cx_0,
+	.outputs	= st_pll3200c32_cx_0_clks,
+};
+
 static const struct clkgen_pll_data st_pll3200c32_cx_1 = {
 	/* 407 C0 PLL1 */
 	.pdn_status	= CLKGEN_FIELD(0x2c8,	0x1,			8),
@@ -87,6 +120,19 @@ static const struct clkgen_pll_data st_pll3200c32_cx_1 = {
 	.ops		= &stm_pll3200c32_ops,
 };
 
+static const struct clkgen_pll_data_clks st_pll3200c32_cx_1_legacy_data = {
+	.data	= (struct clkgen_pll_data *)&st_pll3200c32_cx_1,
+};
+
+static const struct clkgen_clk_out st_pll3200c32_cx_1_clks[] = {
+	{ .name = "clk-s-c0-pll1-odf-0",	.flags = CLK_IS_CRITICAL },
+};
+
+static const struct clkgen_pll_data_clks st_pll3200c32_c1_data = {
+	.data		= (struct clkgen_pll_data *)&st_pll3200c32_cx_1,
+	.outputs	= st_pll3200c32_cx_1_clks,
+};
+
 static const struct clkgen_pll_data st_pll3200c32_407_a9 = {
 	/* 407 A9 */
 	.pdn_status	= CLKGEN_FIELD(0x1a8,	0x1,			0),
@@ -104,6 +150,15 @@ static const struct clkgen_pll_data st_pll3200c32_407_a9 = {
 	.ops		= &stm_pll3200c32_a9_ops,
 };
 
+static const struct clkgen_clk_out st_pll3200c32_407_a9_clks[] = {
+	{ .name = "clockgen-a9-pll-odf",	.flags = CLK_IS_CRITICAL },
+};
+
+static const struct clkgen_pll_data_clks st_pll3200c32_407_a9_data = {
+	.data		= (struct clkgen_pll_data *)&st_pll3200c32_407_a9,
+	.outputs	= st_pll3200c32_407_a9_clks,
+};
+
 static struct clkgen_pll_data st_pll4600c28_418_a9 = {
 	/* 418 A9 */
 	.pdn_status	= CLKGEN_FIELD(0x1a8,	0x1,			0),
@@ -120,6 +175,15 @@ static struct clkgen_pll_data st_pll4600c28_418_a9 = {
 	.ops		= &stm_pll4600c28_ops,
 };
 
+static const struct clkgen_clk_out st_pll4600c28_418_a9_clks[] = {
+	{ .name = "clockgen-a9-pll-odf", },
+};
+
+static const struct clkgen_pll_data_clks st_pll4600c28_418_a9_data = {
+	.data		= (struct clkgen_pll_data *)&st_pll4600c28_418_a9,
+	.outputs	= st_pll4600c28_418_a9_clks,
+};
+
 /**
  * DOC: Clock Generated by PLL, rate set and enabled by bootloader
  *
@@ -684,7 +748,7 @@ static struct clk * __init clkgen_odf_register(const char *parent_name,
 
 
 static void __init clkgen_c32_pll_setup(struct device_node *np,
-		struct clkgen_pll_data *data)
+		struct clkgen_pll_data_clks *datac)
 {
 	struct clk *clk;
 	const char *parent_name, *pll_name;
@@ -704,14 +768,14 @@ static void __init clkgen_c32_pll_setup(struct device_node *np,
 
 	of_clk_detect_critical(np, 0, &pll_flags);
 
-	clk = clkgen_pll_register(parent_name, data, pll_base, pll_flags,
-				  np->name, data->lock);
+	clk = clkgen_pll_register(parent_name, datac->data, pll_base, pll_flags,
+				  np->name, datac->data->lock);
 	if (IS_ERR(clk))
 		return;
 
 	pll_name = __clk_get_name(clk);
 
-	num_odfs = data->num_odfs;
+	num_odfs = datac->data->num_odfs;
 
 	clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
 	if (!clk_data)
@@ -729,14 +793,21 @@ static void __init clkgen_c32_pll_setup(struct device_node *np,
 		const char *clk_name;
 		unsigned long odf_flags = 0;
 
-		if (of_property_read_string_index(np, "clock-output-names",
-						  odf, &clk_name))
-			return;
+		if (datac->outputs) {
+			clk_name = datac->outputs[odf].name;
+			odf_flags = datac->outputs[odf].flags;
+		} else {
+			if (of_property_read_string_index(np,
+							  "clock-output-names",
+							  odf, &clk_name))
+				return;
 
-		of_clk_detect_critical(np, odf, &odf_flags);
+			of_clk_detect_critical(np, odf, &odf_flags);
+		}
 
-		clk = clkgen_odf_register(pll_name, pll_base, data, odf_flags,
-				odf, &clkgena_c32_odf_lock, clk_name);
+		clk = clkgen_odf_register(pll_name, pll_base, datac->data,
+				odf_flags, odf, &clkgena_c32_odf_lock,
+				clk_name);
 		if (IS_ERR(clk))
 			goto err;
 
@@ -754,27 +825,48 @@ static void __init clkgen_c32_pll_setup(struct device_node *np,
 static void __init clkgen_c32_pll0_setup(struct device_node *np)
 {
 	clkgen_c32_pll_setup(np,
-			(struct clkgen_pll_data *) &st_pll3200c32_cx_0);
+		(struct clkgen_pll_data_clks *) &st_pll3200c32_cx_0_legacy_data);
 }
 CLK_OF_DECLARE(c32_pll0, "st,clkgen-pll0", clkgen_c32_pll0_setup);
 
+static void __init clkgen_c32_pll0_a0_setup(struct device_node *np)
+{
+	clkgen_c32_pll_setup(np,
+		(struct clkgen_pll_data_clks *) &st_pll3200c32_a0_data);
+}
+CLK_OF_DECLARE(c32_pll0_a0, "st,clkgen-pll0-a0", clkgen_c32_pll0_a0_setup);
+
+static void __init clkgen_c32_pll0_c0_setup(struct device_node *np)
+{
+	clkgen_c32_pll_setup(np,
+		(struct clkgen_pll_data_clks *) &st_pll3200c32_c0_data);
+}
+CLK_OF_DECLARE(c32_pll0_c0, "st,clkgen-pll0-c0", clkgen_c32_pll0_c0_setup);
+
 static void __init clkgen_c32_pll1_setup(struct device_node *np)
 {
 	clkgen_c32_pll_setup(np,
-			(struct clkgen_pll_data *) &st_pll3200c32_cx_1);
+		(struct clkgen_pll_data_clks *) &st_pll3200c32_cx_1_legacy_data);
 }
 CLK_OF_DECLARE(c32_pll1, "st,clkgen-pll1", clkgen_c32_pll1_setup);
 
+static void __init clkgen_c32_pll1_c0_setup(struct device_node *np)
+{
+	clkgen_c32_pll_setup(np,
+		(struct clkgen_pll_data_clks *) &st_pll3200c32_c1_data);
+}
+CLK_OF_DECLARE(c32_pll1_c0, "st,clkgen-pll1-c0", clkgen_c32_pll1_c0_setup);
+
 static void __init clkgen_c32_plla9_setup(struct device_node *np)
 {
 	clkgen_c32_pll_setup(np,
-			(struct clkgen_pll_data *) &st_pll3200c32_407_a9);
+		(struct clkgen_pll_data_clks *) &st_pll3200c32_407_a9_data);
 }
 CLK_OF_DECLARE(c32_plla9, "st,stih407-clkgen-plla9", clkgen_c32_plla9_setup);
 
 static void __init clkgen_c28_plla9_setup(struct device_node *np)
 {
 	clkgen_c32_pll_setup(np,
-			(struct clkgen_pll_data *) &st_pll4600c28_418_a9);
+		(struct clkgen_pll_data_clks *) &st_pll4600c28_418_a9_data);
 }
 CLK_OF_DECLARE(c28_plla9, "st,stih418-clkgen-plla9", clkgen_c28_plla9_setup);
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 05/16] dt-bindings: clock: st: clkgen-pll: add new introduced compatible

[Alain Volmat]

New compatible are added, supporting various kind of clkgen-pll
used for STiH407, STiH410 and STiH418

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
index f207053e0550..d0fa1e02d06d 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -10,7 +10,10 @@ Required properties:
 
 - compatible : shall be:
 	"st,clkgen-pll0"
+	"st,clkgen-pll0-a0"
+	"st,clkgen-pll0-c0"
 	"st,clkgen-pll1"
+	"st,clkgen-pll1-c0"
 	"st,stih407-clkgen-plla9"
 	"st,stih418-clkgen-plla9"
 
-- 
2.17.1

[PATCH v2 05/16] dt-bindings: clock: st: clkgen-pll: add new introduced compatible

[Alain Volmat]

New compatible are added, supporting various kind of clkgen-pll
used for STiH407, STiH410 and STiH418

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
index f207053e0550..d0fa1e02d06d 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -10,7 +10,10 @@ Required properties:
 
 - compatible : shall be:
 	"st,clkgen-pll0"
+	"st,clkgen-pll0-a0"
+	"st,clkgen-pll0-c0"
 	"st,clkgen-pll1"
+	"st,clkgen-pll1-c0"
 	"st,stih407-clkgen-plla9"
 	"st,stih418-clkgen-plla9"
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 06/16] clk: st: clkgen-fsyn: embed soc clock outputs within compatible data

[Alain Volmat]

In order to avoid relying on the old style description via the DT
clock-output-names, add compatible data describing the flexgen
outputs clocks for all STiH407/STiH410 and STiH418 SOCs.

In order to ease transition between the two methods, this commit
introduce the new compatible without removing the old method.
Once DTs will be fixed, the method relying on DT clock-output-names
will be removed from this driver as well as old compatibles.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
v2: clk-s-c0-fs0-ch0 do not need to be CLK_IS_CRITICAL

 drivers/clk/st/clkgen-fsyn.c | 113 +++++++++++++++++++++++++++++++----
 1 file changed, 101 insertions(+), 12 deletions(-)

diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index dd6062e043e0..164285d6be97 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -66,6 +66,16 @@ struct clkgen_quadfs_data {
 			unsigned long *);
 };
 
+struct clkgen_clk_out {
+	const char *name;
+	unsigned long flags;
+};
+
+struct clkgen_quadfs_data_clks {
+	struct clkgen_quadfs_data *data;
+	const struct clkgen_clk_out *outputs;
+};
+
 static const struct clk_ops st_quadfs_pll_c32_ops;
 
 static int clk_fs660c32_dig_get_params(unsigned long input,
@@ -115,6 +125,18 @@ static const struct clkgen_quadfs_data st_fs660c32_C = {
 	.get_rate	= clk_fs660c32_dig_get_rate,
 };
 
+static const struct clkgen_clk_out st_fs660c32_C_clks[] = {
+	{ .name = "clk-s-c0-fs0-ch0",	},
+	{ .name = "clk-s-c0-fs0-ch1",	},
+	{ .name = "clk-s-c0-fs0-ch2",	},
+	{ .name = "clk-s-c0-fs0-ch3",	},
+};
+
+static const struct clkgen_quadfs_data_clks st_fs660c32_C_data = {
+	.data	= (struct clkgen_quadfs_data *)&st_fs660c32_C,
+	.outputs	= st_fs660c32_C_clks,
+};
+
 static const struct clkgen_quadfs_data st_fs660c32_D = {
 	.nrst_present = true,
 	.nrst	= { CLKGEN_FIELD(0x2a0, 0x1, 0),
@@ -156,6 +178,46 @@ static const struct clkgen_quadfs_data st_fs660c32_D = {
 	.get_params	= clk_fs660c32_dig_get_params,
 	.get_rate	= clk_fs660c32_dig_get_rate,};
 
+static const struct clkgen_quadfs_data_clks st_fs660c32_D_data = {
+	.data	= (struct clkgen_quadfs_data *)&st_fs660c32_D,
+};
+
+static const struct clkgen_clk_out st_fs660c32_D0_clks[] = {
+	{ .name = "clk-s-d0-fs0-ch0",	},
+	{ .name = "clk-s-d0-fs0-ch1",	},
+	{ .name = "clk-s-d0-fs0-ch2",	},
+	{ .name = "clk-s-d0-fs0-ch3",	},
+};
+
+static const struct clkgen_quadfs_data_clks st_fs660c32_D0_data = {
+	.data	= (struct clkgen_quadfs_data *)&st_fs660c32_D,
+	.outputs	= st_fs660c32_D0_clks,
+};
+
+static const struct clkgen_clk_out st_fs660c32_D2_clks[] = {
+	{ .name = "clk-s-d2-fs0-ch0",	},
+	{ .name = "clk-s-d2-fs0-ch1",	},
+	{ .name = "clk-s-d2-fs0-ch2",	},
+	{ .name = "clk-s-d2-fs0-ch3",	},
+};
+
+static const struct clkgen_quadfs_data_clks st_fs660c32_D2_data = {
+	.data	= (struct clkgen_quadfs_data *)&st_fs660c32_D,
+	.outputs	= st_fs660c32_D2_clks,
+};
+
+static const struct clkgen_clk_out st_fs660c32_D3_clks[] = {
+	{ .name = "clk-s-d3-fs0-ch0",	},
+	{ .name = "clk-s-d3-fs0-ch1",	},
+	{ .name = "clk-s-d3-fs0-ch2",	},
+	{ .name = "clk-s-d3-fs0-ch3",	},
+};
+
+static const struct clkgen_quadfs_data_clks st_fs660c32_D3_data = {
+	.data	= (struct clkgen_quadfs_data *)&st_fs660c32_D,
+	.outputs	= st_fs660c32_D3_clks,
+};
+
 /**
  * DOC: A Frequency Synthesizer that multiples its input clock by a fixed factor
  *
@@ -857,7 +919,7 @@ static struct clk * __init st_clk_register_quadfs_fsynth(
 
 static void __init st_of_create_quadfs_fsynths(
 		struct device_node *np, const char *pll_name,
-		struct clkgen_quadfs_data *quadfs, void __iomem *reg,
+		struct clkgen_quadfs_data_clks *quadfs, void __iomem *reg,
 		spinlock_t *lock)
 {
 	struct clk_onecell_data *clk_data;
@@ -881,9 +943,15 @@ static void __init st_of_create_quadfs_fsynths(
 		const char *clk_name;
 		unsigned long flags = 0;
 
-		if (of_property_read_string_index(np, "clock-output-names",
-						  fschan, &clk_name)) {
-			break;
+		if (quadfs->outputs) {
+			clk_name = quadfs->outputs[fschan].name;
+			flags = quadfs->outputs[fschan].flags;
+		} else {
+			if (of_property_read_string_index(np,
+							"clock-output-names",
+							fschan, &clk_name))
+				break;
+			of_clk_detect_critical(np, fschan, &flags);
 		}
 
 		/*
@@ -892,10 +960,8 @@ static void __init st_of_create_quadfs_fsynths(
 		if (*clk_name == '\0')
 			continue;
 
-		of_clk_detect_critical(np, fschan, &flags);
-
 		clk = st_clk_register_quadfs_fsynth(clk_name, pll_name,
-						    quadfs, reg, fschan,
+						    quadfs->data, reg, fschan,
 						    flags, lock);
 
 		/*
@@ -915,7 +981,7 @@ static void __init st_of_create_quadfs_fsynths(
 }
 
 static void __init st_of_quadfs_setup(struct device_node *np,
-		struct clkgen_quadfs_data *data)
+		struct clkgen_quadfs_data_clks *datac)
 {
 	struct clk *clk;
 	const char *pll_name, *clk_parent_name;
@@ -940,7 +1006,7 @@ static void __init st_of_quadfs_setup(struct device_node *np,
 
 	spin_lock_init(lock);
 
-	clk = st_clk_register_quadfs_pll(pll_name, clk_parent_name, data,
+	clk = st_clk_register_quadfs_pll(pll_name, clk_parent_name, datac->data,
 			reg, lock);
 	if (IS_ERR(clk))
 		goto err_exit;
@@ -950,7 +1016,7 @@ static void __init st_of_quadfs_setup(struct device_node *np,
 			__clk_get_name(clk_get_parent(clk)),
 			(unsigned int)clk_get_rate(clk));
 
-	st_of_create_quadfs_fsynths(np, pll_name, data, reg, lock);
+	st_of_create_quadfs_fsynths(np, pll_name, datac, reg, lock);
 
 err_exit:
 	kfree(pll_name); /* No longer need local copy of the PLL name */
@@ -958,12 +1024,35 @@ static void __init st_of_quadfs_setup(struct device_node *np,
 
 static void __init st_of_quadfs660C_setup(struct device_node *np)
 {
-	st_of_quadfs_setup(np, (struct clkgen_quadfs_data *) &st_fs660c32_C);
+	st_of_quadfs_setup(np,
+		(struct clkgen_quadfs_data_clks *) &st_fs660c32_C_data);
 }
 CLK_OF_DECLARE(quadfs660C, "st,quadfs-pll", st_of_quadfs660C_setup);
 
 static void __init st_of_quadfs660D_setup(struct device_node *np)
 {
-	st_of_quadfs_setup(np, (struct clkgen_quadfs_data *) &st_fs660c32_D);
+	st_of_quadfs_setup(np,
+		(struct clkgen_quadfs_data_clks *) &st_fs660c32_D_data);
 }
 CLK_OF_DECLARE(quadfs660D, "st,quadfs", st_of_quadfs660D_setup);
+
+static void __init st_of_quadfs660D0_setup(struct device_node *np)
+{
+	st_of_quadfs_setup(np,
+		(struct clkgen_quadfs_data_clks *) &st_fs660c32_D0_data);
+}
+CLK_OF_DECLARE(quadfs660D0, "st,quadfs-d0", st_of_quadfs660D0_setup);
+
+static void __init st_of_quadfs660D2_setup(struct device_node *np)
+{
+	st_of_quadfs_setup(np,
+		(struct clkgen_quadfs_data_clks *) &st_fs660c32_D2_data);
+}
+CLK_OF_DECLARE(quadfs660D2, "st,quadfs-d2", st_of_quadfs660D2_setup);
+
+static void __init st_of_quadfs660D3_setup(struct device_node *np)
+{
+	st_of_quadfs_setup(np,
+		(struct clkgen_quadfs_data_clks *) &st_fs660c32_D3_data);
+}
+CLK_OF_DECLARE(quadfs660D3, "st,quadfs-d3", st_of_quadfs660D3_setup);
-- 
2.17.1

[PATCH v2 06/16] clk: st: clkgen-fsyn: embed soc clock outputs within compatible data

[Alain Volmat]

In order to avoid relying on the old style description via the DT
clock-output-names, add compatible data describing the flexgen
outputs clocks for all STiH407/STiH410 and STiH418 SOCs.

In order to ease transition between the two methods, this commit
introduce the new compatible without removing the old method.
Once DTs will be fixed, the method relying on DT clock-output-names
will be removed from this driver as well as old compatibles.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
v2: clk-s-c0-fs0-ch0 do not need to be CLK_IS_CRITICAL

 drivers/clk/st/clkgen-fsyn.c | 113 +++++++++++++++++++++++++++++++----
 1 file changed, 101 insertions(+), 12 deletions(-)

diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index dd6062e043e0..164285d6be97 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -66,6 +66,16 @@ struct clkgen_quadfs_data {
 			unsigned long *);
 };
 
+struct clkgen_clk_out {
+	const char *name;
+	unsigned long flags;
+};
+
+struct clkgen_quadfs_data_clks {
+	struct clkgen_quadfs_data *data;
+	const struct clkgen_clk_out *outputs;
+};
+
 static const struct clk_ops st_quadfs_pll_c32_ops;
 
 static int clk_fs660c32_dig_get_params(unsigned long input,
@@ -115,6 +125,18 @@ static const struct clkgen_quadfs_data st_fs660c32_C = {
 	.get_rate	= clk_fs660c32_dig_get_rate,
 };
 
+static const struct clkgen_clk_out st_fs660c32_C_clks[] = {
+	{ .name = "clk-s-c0-fs0-ch0",	},
+	{ .name = "clk-s-c0-fs0-ch1",	},
+	{ .name = "clk-s-c0-fs0-ch2",	},
+	{ .name = "clk-s-c0-fs0-ch3",	},
+};
+
+static const struct clkgen_quadfs_data_clks st_fs660c32_C_data = {
+	.data	= (struct clkgen_quadfs_data *)&st_fs660c32_C,
+	.outputs	= st_fs660c32_C_clks,
+};
+
 static const struct clkgen_quadfs_data st_fs660c32_D = {
 	.nrst_present = true,
 	.nrst	= { CLKGEN_FIELD(0x2a0, 0x1, 0),
@@ -156,6 +178,46 @@ static const struct clkgen_quadfs_data st_fs660c32_D = {
 	.get_params	= clk_fs660c32_dig_get_params,
 	.get_rate	= clk_fs660c32_dig_get_rate,};
 
+static const struct clkgen_quadfs_data_clks st_fs660c32_D_data = {
+	.data	= (struct clkgen_quadfs_data *)&st_fs660c32_D,
+};
+
+static const struct clkgen_clk_out st_fs660c32_D0_clks[] = {
+	{ .name = "clk-s-d0-fs0-ch0",	},
+	{ .name = "clk-s-d0-fs0-ch1",	},
+	{ .name = "clk-s-d0-fs0-ch2",	},
+	{ .name = "clk-s-d0-fs0-ch3",	},
+};
+
+static const struct clkgen_quadfs_data_clks st_fs660c32_D0_data = {
+	.data	= (struct clkgen_quadfs_data *)&st_fs660c32_D,
+	.outputs	= st_fs660c32_D0_clks,
+};
+
+static const struct clkgen_clk_out st_fs660c32_D2_clks[] = {
+	{ .name = "clk-s-d2-fs0-ch0",	},
+	{ .name = "clk-s-d2-fs0-ch1",	},
+	{ .name = "clk-s-d2-fs0-ch2",	},
+	{ .name = "clk-s-d2-fs0-ch3",	},
+};
+
+static const struct clkgen_quadfs_data_clks st_fs660c32_D2_data = {
+	.data	= (struct clkgen_quadfs_data *)&st_fs660c32_D,
+	.outputs	= st_fs660c32_D2_clks,
+};
+
+static const struct clkgen_clk_out st_fs660c32_D3_clks[] = {
+	{ .name = "clk-s-d3-fs0-ch0",	},
+	{ .name = "clk-s-d3-fs0-ch1",	},
+	{ .name = "clk-s-d3-fs0-ch2",	},
+	{ .name = "clk-s-d3-fs0-ch3",	},
+};
+
+static const struct clkgen_quadfs_data_clks st_fs660c32_D3_data = {
+	.data	= (struct clkgen_quadfs_data *)&st_fs660c32_D,
+	.outputs	= st_fs660c32_D3_clks,
+};
+
 /**
  * DOC: A Frequency Synthesizer that multiples its input clock by a fixed factor
  *
@@ -857,7 +919,7 @@ static struct clk * __init st_clk_register_quadfs_fsynth(
 
 static void __init st_of_create_quadfs_fsynths(
 		struct device_node *np, const char *pll_name,
-		struct clkgen_quadfs_data *quadfs, void __iomem *reg,
+		struct clkgen_quadfs_data_clks *quadfs, void __iomem *reg,
 		spinlock_t *lock)
 {
 	struct clk_onecell_data *clk_data;
@@ -881,9 +943,15 @@ static void __init st_of_create_quadfs_fsynths(
 		const char *clk_name;
 		unsigned long flags = 0;
 
-		if (of_property_read_string_index(np, "clock-output-names",
-						  fschan, &clk_name)) {
-			break;
+		if (quadfs->outputs) {
+			clk_name = quadfs->outputs[fschan].name;
+			flags = quadfs->outputs[fschan].flags;
+		} else {
+			if (of_property_read_string_index(np,
+							"clock-output-names",
+							fschan, &clk_name))
+				break;
+			of_clk_detect_critical(np, fschan, &flags);
 		}
 
 		/*
@@ -892,10 +960,8 @@ static void __init st_of_create_quadfs_fsynths(
 		if (*clk_name == '\0')
 			continue;
 
-		of_clk_detect_critical(np, fschan, &flags);
-
 		clk = st_clk_register_quadfs_fsynth(clk_name, pll_name,
-						    quadfs, reg, fschan,
+						    quadfs->data, reg, fschan,
 						    flags, lock);
 
 		/*
@@ -915,7 +981,7 @@ static void __init st_of_create_quadfs_fsynths(
 }
 
 static void __init st_of_quadfs_setup(struct device_node *np,
-		struct clkgen_quadfs_data *data)
+		struct clkgen_quadfs_data_clks *datac)
 {
 	struct clk *clk;
 	const char *pll_name, *clk_parent_name;
@@ -940,7 +1006,7 @@ static void __init st_of_quadfs_setup(struct device_node *np,
 
 	spin_lock_init(lock);
 
-	clk = st_clk_register_quadfs_pll(pll_name, clk_parent_name, data,
+	clk = st_clk_register_quadfs_pll(pll_name, clk_parent_name, datac->data,
 			reg, lock);
 	if (IS_ERR(clk))
 		goto err_exit;
@@ -950,7 +1016,7 @@ static void __init st_of_quadfs_setup(struct device_node *np,
 			__clk_get_name(clk_get_parent(clk)),
 			(unsigned int)clk_get_rate(clk));
 
-	st_of_create_quadfs_fsynths(np, pll_name, data, reg, lock);
+	st_of_create_quadfs_fsynths(np, pll_name, datac, reg, lock);
 
 err_exit:
 	kfree(pll_name); /* No longer need local copy of the PLL name */
@@ -958,12 +1024,35 @@ static void __init st_of_quadfs_setup(struct device_node *np,
 
 static void __init st_of_quadfs660C_setup(struct device_node *np)
 {
-	st_of_quadfs_setup(np, (struct clkgen_quadfs_data *) &st_fs660c32_C);
+	st_of_quadfs_setup(np,
+		(struct clkgen_quadfs_data_clks *) &st_fs660c32_C_data);
 }
 CLK_OF_DECLARE(quadfs660C, "st,quadfs-pll", st_of_quadfs660C_setup);
 
 static void __init st_of_quadfs660D_setup(struct device_node *np)
 {
-	st_of_quadfs_setup(np, (struct clkgen_quadfs_data *) &st_fs660c32_D);
+	st_of_quadfs_setup(np,
+		(struct clkgen_quadfs_data_clks *) &st_fs660c32_D_data);
 }
 CLK_OF_DECLARE(quadfs660D, "st,quadfs", st_of_quadfs660D_setup);
+
+static void __init st_of_quadfs660D0_setup(struct device_node *np)
+{
+	st_of_quadfs_setup(np,
+		(struct clkgen_quadfs_data_clks *) &st_fs660c32_D0_data);
+}
+CLK_OF_DECLARE(quadfs660D0, "st,quadfs-d0", st_of_quadfs660D0_setup);
+
+static void __init st_of_quadfs660D2_setup(struct device_node *np)
+{
+	st_of_quadfs_setup(np,
+		(struct clkgen_quadfs_data_clks *) &st_fs660c32_D2_data);
+}
+CLK_OF_DECLARE(quadfs660D2, "st,quadfs-d2", st_of_quadfs660D2_setup);
+
+static void __init st_of_quadfs660D3_setup(struct device_node *np)
+{
+	st_of_quadfs_setup(np,
+		(struct clkgen_quadfs_data_clks *) &st_fs660c32_D3_data);
+}
+CLK_OF_DECLARE(quadfs660D3, "st,quadfs-d3", st_of_quadfs660D3_setup);
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 07/16] dt-bindings: clock: st: clkgen-fsyn: add new introduced compatible

[Alain Volmat]

New compatible are added, supporting various kind of clkgen-fsyn
used for STiH407, STiH410 and STiH418

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 Documentation/devicetree/bindings/clock/st/st,quadfs.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
index d93d49342e60..c4ba2adb0b4f 100644
--- a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
@@ -12,6 +12,9 @@ This binding uses the common clock binding[1].
 Required properties:
 - compatible : shall be:
   "st,quadfs"
+  "st,quadfs-d0"
+  "st,quadfs-d2"
+  "st,quadfs-d3"
   "st,quadfs-pll"
 
 
-- 
2.17.1

[PATCH v2 07/16] dt-bindings: clock: st: clkgen-fsyn: add new introduced compatible

[Alain Volmat]

New compatible are added, supporting various kind of clkgen-fsyn
used for STiH407, STiH410 and STiH418

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 Documentation/devicetree/bindings/clock/st/st,quadfs.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
index d93d49342e60..c4ba2adb0b4f 100644
--- a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
@@ -12,6 +12,9 @@ This binding uses the common clock binding[1].
 Required properties:
 - compatible : shall be:
   "st,quadfs"
+  "st,quadfs-d0"
+  "st,quadfs-d2"
+  "st,quadfs-d3"
   "st,quadfs-pll"
 
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 08/16] ARM: dts: sti: update flexgen compatible within stih418-clock

[Alain Volmat]

With the introduction of new flexgen compatible within the clk-flexgen
driver, remove the clock-output-names entry from the flexgen nodes
and set the new proper compatible corresponding.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 arch/arm/boot/dts/stih418-clock.dtsi | 96 ++--------------------------
 1 file changed, 5 insertions(+), 91 deletions(-)

diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index 8fa092462102..35d12979cdf4 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -83,15 +83,12 @@
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-a0";
 
 				#clock-cells = <1>;
 
 				clocks = <&clk_s_a0_pll 0>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-ic-lmi0",
-						     "clk-ic-lmi1";
 			};
 		};
 
@@ -132,7 +129,7 @@
 
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih418-c0";
 
 				clocks = <&clk_s_c0_pll0 0>,
 					 <&clk_s_c0_pll1 0>,
@@ -142,49 +139,6 @@
 					 <&clk_s_c0_quadfs 3>,
 					 <&clk_sysin>;
 
-				clock-output-names = "clk-icn-gpu",
-						     "clk-fdma",
-						     "clk-nand",
-						     "clk-hva",
-						     "clk-proc-stfe",
-						     "clk-tp",
-						     "clk-rx-icn-dmu",
-						     "clk-rx-icn-hva",
-						     "clk-icn-cpu",
-						     "clk-tx-icn-dmu",
-						     "clk-mmc-0",
-						     "clk-mmc-1",
-						     "clk-jpegdec",
-						     "clk-icn-reg",
-						     "clk-proc-bdisp-0",
-						     "clk-proc-bdisp-1",
-						     "clk-pp-dmu",
-						     "clk-vid-dmu",
-						     "clk-dss-lpc",
-						     "clk-st231-aud-0",
-						     "clk-st231-gp-1",
-						     "clk-st231-dmu",
-						     "clk-icn-lmi",
-						     "clk-tx-icn-1",
-						     "clk-icn-sbc",
-						     "clk-stfe-frc2",
-						     "clk-eth-phyref",
-						     "clk-eth-ref-phyclk",
-						     "clk-flash-promip",
-						     "clk-main-disp",
-						     "clk-aux-disp",
-						     "clk-compo-dvp",
-						     "clk-tx-icn-hades",
-						     "clk-rx-icn-hades",
-						     "clk-icn-reg-16",
-						     "clk-pp-hevc",
-						     "clk-clust-hevc",
-						     "clk-hwpe-hevc",
-						     "clk-fc-hevc",
-						     "clk-proc-mixer",
-						     "clk-proc-sc",
-						     "clk-avsp-hevc";
-
 				/*
 				 * ARM Peripheral clock for timers
 				 */
@@ -221,20 +175,13 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-audio", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-d0";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
 					 <&clk_s_d0_quadfs 2>,
 					 <&clk_s_d0_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-pcm-0",
-						     "clk-pcm-1",
-						     "clk-pcm-2",
-						     "clk-spdiff",
-						     "clk-pcmr10-master",
-						     "clk-usb2-phy";
 			};
 		};
 
@@ -257,7 +204,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-video", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih418-d2";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -266,30 +213,6 @@
 					 <&clk_sysin>,
 					 <&clk_sysin>,
 					 <&clk_tmdsout_hdmi>;
-
-				clock-output-names = "clk-pix-main-disp",
-						     "",
-						     "",
-						     "",
-						     "",
-						     "clk-tmds-hdmi-div2",
-						     "clk-pix-aux-disp",
-						     "clk-denc",
-						     "clk-pix-hddac",
-						     "clk-hddac",
-						     "clk-sddac",
-						     "clk-pix-dvo",
-						     "clk-dvo",
-						     "clk-pix-hdmi",
-						     "clk-tmds-hdmi",
-						     "clk-ref-hdmiphy",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "clk-vp9";
 			};
 		};
 
@@ -312,22 +235,13 @@
 
 			clk_s_d3_flexgen: clk-s-d3-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d3";
 
 				clocks = <&clk_s_d3_quadfs 0>,
 					 <&clk_s_d3_quadfs 1>,
 					 <&clk_s_d3_quadfs 2>,
 					 <&clk_s_d3_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-stfe-frc1",
-						     "clk-tsout-0",
-						     "clk-tsout-1",
-						     "clk-mchi",
-						     "clk-vsens-compo",
-						     "clk-frc1-remote",
-						     "clk-lpc-0",
-						     "clk-lpc-1";
 			};
 		};
 	};
-- 
2.17.1

[PATCH v2 08/16] ARM: dts: sti: update flexgen compatible within stih418-clock

[Alain Volmat]

With the introduction of new flexgen compatible within the clk-flexgen
driver, remove the clock-output-names entry from the flexgen nodes
and set the new proper compatible corresponding.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 arch/arm/boot/dts/stih418-clock.dtsi | 96 ++--------------------------
 1 file changed, 5 insertions(+), 91 deletions(-)

diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index 8fa092462102..35d12979cdf4 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -83,15 +83,12 @@
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-a0";
 
 				#clock-cells = <1>;
 
 				clocks = <&clk_s_a0_pll 0>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-ic-lmi0",
-						     "clk-ic-lmi1";
 			};
 		};
 
@@ -132,7 +129,7 @@
 
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih418-c0";
 
 				clocks = <&clk_s_c0_pll0 0>,
 					 <&clk_s_c0_pll1 0>,
@@ -142,49 +139,6 @@
 					 <&clk_s_c0_quadfs 3>,
 					 <&clk_sysin>;
 
-				clock-output-names = "clk-icn-gpu",
-						     "clk-fdma",
-						     "clk-nand",
-						     "clk-hva",
-						     "clk-proc-stfe",
-						     "clk-tp",
-						     "clk-rx-icn-dmu",
-						     "clk-rx-icn-hva",
-						     "clk-icn-cpu",
-						     "clk-tx-icn-dmu",
-						     "clk-mmc-0",
-						     "clk-mmc-1",
-						     "clk-jpegdec",
-						     "clk-icn-reg",
-						     "clk-proc-bdisp-0",
-						     "clk-proc-bdisp-1",
-						     "clk-pp-dmu",
-						     "clk-vid-dmu",
-						     "clk-dss-lpc",
-						     "clk-st231-aud-0",
-						     "clk-st231-gp-1",
-						     "clk-st231-dmu",
-						     "clk-icn-lmi",
-						     "clk-tx-icn-1",
-						     "clk-icn-sbc",
-						     "clk-stfe-frc2",
-						     "clk-eth-phyref",
-						     "clk-eth-ref-phyclk",
-						     "clk-flash-promip",
-						     "clk-main-disp",
-						     "clk-aux-disp",
-						     "clk-compo-dvp",
-						     "clk-tx-icn-hades",
-						     "clk-rx-icn-hades",
-						     "clk-icn-reg-16",
-						     "clk-pp-hevc",
-						     "clk-clust-hevc",
-						     "clk-hwpe-hevc",
-						     "clk-fc-hevc",
-						     "clk-proc-mixer",
-						     "clk-proc-sc",
-						     "clk-avsp-hevc";
-
 				/*
 				 * ARM Peripheral clock for timers
 				 */
@@ -221,20 +175,13 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-audio", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-d0";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
 					 <&clk_s_d0_quadfs 2>,
 					 <&clk_s_d0_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-pcm-0",
-						     "clk-pcm-1",
-						     "clk-pcm-2",
-						     "clk-spdiff",
-						     "clk-pcmr10-master",
-						     "clk-usb2-phy";
 			};
 		};
 
@@ -257,7 +204,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-video", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih418-d2";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -266,30 +213,6 @@
 					 <&clk_sysin>,
 					 <&clk_sysin>,
 					 <&clk_tmdsout_hdmi>;
-
-				clock-output-names = "clk-pix-main-disp",
-						     "",
-						     "",
-						     "",
-						     "",
-						     "clk-tmds-hdmi-div2",
-						     "clk-pix-aux-disp",
-						     "clk-denc",
-						     "clk-pix-hddac",
-						     "clk-hddac",
-						     "clk-sddac",
-						     "clk-pix-dvo",
-						     "clk-dvo",
-						     "clk-pix-hdmi",
-						     "clk-tmds-hdmi",
-						     "clk-ref-hdmiphy",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "clk-vp9";
 			};
 		};
 
@@ -312,22 +235,13 @@
 
 			clk_s_d3_flexgen: clk-s-d3-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d3";
 
 				clocks = <&clk_s_d3_quadfs 0>,
 					 <&clk_s_d3_quadfs 1>,
 					 <&clk_s_d3_quadfs 2>,
 					 <&clk_s_d3_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-stfe-frc1",
-						     "clk-tsout-0",
-						     "clk-tsout-1",
-						     "clk-mchi",
-						     "clk-vsens-compo",
-						     "clk-frc1-remote",
-						     "clk-lpc-0",
-						     "clk-lpc-1";
 			};
 		};
 	};
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 09/16] ARM: dts: sti: update flexgen compatible within stih407-clock

[Alain Volmat]

With the introduction of new flexgen compatible within the clk-flexgen
driver, remove the clock-output-names entry from the flexgen nodes
and set the new proper compatible corresponding.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 arch/arm/boot/dts/stih407-clock.dtsi | 85 ++--------------------------
 1 file changed, 6 insertions(+), 79 deletions(-)

diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index 1ab40db7c91a..ecd568777e5f 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -83,15 +83,12 @@
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-a0";
 
 				#clock-cells = <1>;
 
 				clocks = <&clk_s_a0_pll 0>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-ic-lmi0";
-				clock-critical = <CLK_IC_LMI0>;
 			};
 		};
 
@@ -134,7 +131,7 @@
 
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-c0";
 
 				clocks = <&clk_s_c0_pll0 0>,
 					 <&clk_s_c0_pll1 0>,
@@ -144,45 +141,6 @@
 					 <&clk_s_c0_quadfs 3>,
 					 <&clk_sysin>;
 
-				clock-output-names = "clk-icn-gpu",
-						     "clk-fdma",
-						     "clk-nand",
-						     "clk-hva",
-						     "clk-proc-stfe",
-						     "clk-proc-tp",
-						     "clk-rx-icn-dmu",
-						     "clk-rx-icn-hva",
-						     "clk-icn-cpu",
-						     "clk-tx-icn-dmu",
-						     "clk-mmc-0",
-						     "clk-mmc-1",
-						     "clk-jpegdec",
-						     "clk-ext2fa9",
-						     "clk-ic-bdisp-0",
-						     "clk-ic-bdisp-1",
-						     "clk-pp-dmu",
-						     "clk-vid-dmu",
-						     "clk-dss-lpc",
-						     "clk-st231-aud-0",
-						     "clk-st231-gp-1",
-						     "clk-st231-dmu",
-						     "clk-icn-lmi",
-						     "clk-tx-icn-disp-1",
-						     "clk-icn-sbc",
-						     "clk-stfe-frc2",
-						     "clk-eth-phy",
-						     "clk-eth-ref-phyclk",
-						     "clk-flash-promip",
-						     "clk-main-disp",
-						     "clk-aux-disp",
-						     "clk-compo-dvp";
-				clock-critical = <CLK_PROC_STFE>,
-						 <CLK_ICN_CPU>,
-						 <CLK_TX_ICN_DMU>,
-						 <CLK_EXT2F_A9>,
-						 <CLK_ICN_LMI>,
-						 <CLK_ICN_SBC>;
-
 				/*
 				 * ARM Peripheral clock for timers
 				 */
@@ -219,18 +177,13 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-audio", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d0";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
 					 <&clk_s_d0_quadfs 2>,
 					 <&clk_s_d0_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-pcm-0",
-						     "clk-pcm-1",
-						     "clk-pcm-2",
-						     "clk-spdiff";
 			};
 		};
 
@@ -253,7 +206,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-video", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d2";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -262,24 +215,7 @@
 					 <&clk_sysin>,
 					 <&clk_sysin>,
 					 <&clk_tmdsout_hdmi>;
-
-				clock-output-names = "clk-pix-main-disp",
-						     "clk-pix-pip",
-						     "clk-pix-gdp1",
-						     "clk-pix-gdp2",
-						     "clk-pix-gdp3",
-						     "clk-pix-gdp4",
-						     "clk-pix-aux-disp",
-						     "clk-denc",
-						     "clk-pix-hddac",
-						     "clk-hddac",
-						     "clk-sddac",
-						     "clk-pix-dvo",
-						     "clk-dvo",
-						     "clk-pix-hdmi",
-						     "clk-tmds-hdmi",
-						     "clk-ref-hdmiphy";
-						     };
+			};
 		};
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
@@ -301,22 +237,13 @@
 
 			clk_s_d3_flexgen: clk-s-d3-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d3";
 
 				clocks = <&clk_s_d3_quadfs 0>,
 					 <&clk_s_d3_quadfs 1>,
 					 <&clk_s_d3_quadfs 2>,
 					 <&clk_s_d3_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-stfe-frc1",
-						     "clk-tsout-0",
-						     "clk-tsout-1",
-						     "clk-mchi",
-						     "clk-vsens-compo",
-						     "clk-frc1-remote",
-						     "clk-lpc-0",
-						     "clk-lpc-1";
 			};
 		};
 	};
-- 
2.17.1

[PATCH v2 09/16] ARM: dts: sti: update flexgen compatible within stih407-clock

[Alain Volmat]

With the introduction of new flexgen compatible within the clk-flexgen
driver, remove the clock-output-names entry from the flexgen nodes
and set the new proper compatible corresponding.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 arch/arm/boot/dts/stih407-clock.dtsi | 85 ++--------------------------
 1 file changed, 6 insertions(+), 79 deletions(-)

diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index 1ab40db7c91a..ecd568777e5f 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -83,15 +83,12 @@
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-a0";
 
 				#clock-cells = <1>;
 
 				clocks = <&clk_s_a0_pll 0>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-ic-lmi0";
-				clock-critical = <CLK_IC_LMI0>;
 			};
 		};
 
@@ -134,7 +131,7 @@
 
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-c0";
 
 				clocks = <&clk_s_c0_pll0 0>,
 					 <&clk_s_c0_pll1 0>,
@@ -144,45 +141,6 @@
 					 <&clk_s_c0_quadfs 3>,
 					 <&clk_sysin>;
 
-				clock-output-names = "clk-icn-gpu",
-						     "clk-fdma",
-						     "clk-nand",
-						     "clk-hva",
-						     "clk-proc-stfe",
-						     "clk-proc-tp",
-						     "clk-rx-icn-dmu",
-						     "clk-rx-icn-hva",
-						     "clk-icn-cpu",
-						     "clk-tx-icn-dmu",
-						     "clk-mmc-0",
-						     "clk-mmc-1",
-						     "clk-jpegdec",
-						     "clk-ext2fa9",
-						     "clk-ic-bdisp-0",
-						     "clk-ic-bdisp-1",
-						     "clk-pp-dmu",
-						     "clk-vid-dmu",
-						     "clk-dss-lpc",
-						     "clk-st231-aud-0",
-						     "clk-st231-gp-1",
-						     "clk-st231-dmu",
-						     "clk-icn-lmi",
-						     "clk-tx-icn-disp-1",
-						     "clk-icn-sbc",
-						     "clk-stfe-frc2",
-						     "clk-eth-phy",
-						     "clk-eth-ref-phyclk",
-						     "clk-flash-promip",
-						     "clk-main-disp",
-						     "clk-aux-disp",
-						     "clk-compo-dvp";
-				clock-critical = <CLK_PROC_STFE>,
-						 <CLK_ICN_CPU>,
-						 <CLK_TX_ICN_DMU>,
-						 <CLK_EXT2F_A9>,
-						 <CLK_ICN_LMI>,
-						 <CLK_ICN_SBC>;
-
 				/*
 				 * ARM Peripheral clock for timers
 				 */
@@ -219,18 +177,13 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-audio", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d0";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
 					 <&clk_s_d0_quadfs 2>,
 					 <&clk_s_d0_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-pcm-0",
-						     "clk-pcm-1",
-						     "clk-pcm-2",
-						     "clk-spdiff";
 			};
 		};
 
@@ -253,7 +206,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-video", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d2";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -262,24 +215,7 @@
 					 <&clk_sysin>,
 					 <&clk_sysin>,
 					 <&clk_tmdsout_hdmi>;
-
-				clock-output-names = "clk-pix-main-disp",
-						     "clk-pix-pip",
-						     "clk-pix-gdp1",
-						     "clk-pix-gdp2",
-						     "clk-pix-gdp3",
-						     "clk-pix-gdp4",
-						     "clk-pix-aux-disp",
-						     "clk-denc",
-						     "clk-pix-hddac",
-						     "clk-hddac",
-						     "clk-sddac",
-						     "clk-pix-dvo",
-						     "clk-dvo",
-						     "clk-pix-hdmi",
-						     "clk-tmds-hdmi",
-						     "clk-ref-hdmiphy";
-						     };
+			};
 		};
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
@@ -301,22 +237,13 @@
 
 			clk_s_d3_flexgen: clk-s-d3-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d3";
 
 				clocks = <&clk_s_d3_quadfs 0>,
 					 <&clk_s_d3_quadfs 1>,
 					 <&clk_s_d3_quadfs 2>,
 					 <&clk_s_d3_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-stfe-frc1",
-						     "clk-tsout-0",
-						     "clk-tsout-1",
-						     "clk-mchi",
-						     "clk-vsens-compo",
-						     "clk-frc1-remote",
-						     "clk-lpc-0",
-						     "clk-lpc-1";
 			};
 		};
 	};
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 10/16] ARM: dts: sti: update flexgen compatible within stih410-clock

[Alain Volmat]

With the introduction of new flexgen compatible within the clk-flexgen
driver, remove the clock-output-names entry from the flexgen nodes
and set the new proper compatible corresponding.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 arch/arm/boot/dts/stih410-clock.dtsi | 95 ++--------------------------
 1 file changed, 6 insertions(+), 89 deletions(-)

diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index 81a8c25d7ba5..04b0d7080353 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -83,16 +83,12 @@
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-a0";
 
 				#clock-cells = <1>;
 
 				clocks = <&clk_s_a0_pll 0>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-ic-lmi0",
-						     "clk-ic-lmi1";
-				clock-critical = <CLK_IC_LMI0>;
 			};
 		};
 
@@ -135,7 +131,7 @@
 
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-c0";
 
 				clocks = <&clk_s_c0_pll0 0>,
 					 <&clk_s_c0_pll1 0>,
@@ -145,52 +141,6 @@
 					 <&clk_s_c0_quadfs 3>,
 					 <&clk_sysin>;
 
-				clock-output-names = "clk-icn-gpu",
-						     "clk-fdma",
-						     "clk-nand",
-						     "clk-hva",
-						     "clk-proc-stfe",
-						     "clk-proc-tp",
-						     "clk-rx-icn-dmu",
-						     "clk-rx-icn-hva",
-						     "clk-icn-cpu",
-						     "clk-tx-icn-dmu",
-						     "clk-mmc-0",
-						     "clk-mmc-1",
-						     "clk-jpegdec",
-						     "clk-ext2fa9",
-						     "clk-ic-bdisp-0",
-						     "clk-ic-bdisp-1",
-						     "clk-pp-dmu",
-						     "clk-vid-dmu",
-						     "clk-dss-lpc",
-						     "clk-st231-aud-0",
-						     "clk-st231-gp-1",
-						     "clk-st231-dmu",
-						     "clk-icn-lmi",
-						     "clk-tx-icn-disp-1",
-						     "clk-icn-sbc",
-						     "clk-stfe-frc2",
-						     "clk-eth-phy",
-						     "clk-eth-ref-phyclk",
-						     "clk-flash-promip",
-						     "clk-main-disp",
-						     "clk-aux-disp",
-						     "clk-compo-dvp",
-						     "clk-tx-icn-hades",
-						     "clk-rx-icn-hades",
-						     "clk-icn-reg-16",
-						     "clk-pp-hades",
-						     "clk-clust-hades",
-						     "clk-hwpe-hades",
-						     "clk-fc-hades";
-				clock-critical = <CLK_PROC_STFE>,
-						 <CLK_ICN_CPU>,
-						 <CLK_TX_ICN_DMU>,
-						 <CLK_EXT2F_A9>,
-						 <CLK_ICN_LMI>,
-						 <CLK_ICN_SBC>;
-
 				/*
 				 * ARM Peripheral clock for timers
 				 */
@@ -227,20 +177,13 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-audio", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-d0";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
 					 <&clk_s_d0_quadfs 2>,
 					 <&clk_s_d0_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-pcm-0",
-						     "clk-pcm-1",
-						     "clk-pcm-2",
-						     "clk-spdiff",
-						     "clk-pcmr10-master",
-						     "clk-usb2-phy";
 			};
 		};
 
@@ -263,7 +206,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-video", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d2";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -272,24 +215,7 @@
 					 <&clk_sysin>,
 					 <&clk_sysin>,
 					 <&clk_tmdsout_hdmi>;
-
-				clock-output-names = "clk-pix-main-disp",
-						     "clk-pix-pip",
-						     "clk-pix-gdp1",
-						     "clk-pix-gdp2",
-						     "clk-pix-gdp3",
-						     "clk-pix-gdp4",
-						     "clk-pix-aux-disp",
-						     "clk-denc",
-						     "clk-pix-hddac",
-						     "clk-hddac",
-						     "clk-sddac",
-						     "clk-pix-dvo",
-						     "clk-dvo",
-						     "clk-pix-hdmi",
-						     "clk-tmds-hdmi",
-						     "clk-ref-hdmiphy";
-						     };
+			};
 		};
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
@@ -311,22 +237,13 @@
 
 			clk_s_d3_flexgen: clk-s-d3-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d3";
 
 				clocks = <&clk_s_d3_quadfs 0>,
 					 <&clk_s_d3_quadfs 1>,
 					 <&clk_s_d3_quadfs 2>,
 					 <&clk_s_d3_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-stfe-frc1",
-						     "clk-tsout-0",
-						     "clk-tsout-1",
-						     "clk-mchi",
-						     "clk-vsens-compo",
-						     "clk-frc1-remote",
-						     "clk-lpc-0",
-						     "clk-lpc-1";
 			};
 		};
 	};
-- 
2.17.1

[PATCH v2 10/16] ARM: dts: sti: update flexgen compatible within stih410-clock

[Alain Volmat]

With the introduction of new flexgen compatible within the clk-flexgen
driver, remove the clock-output-names entry from the flexgen nodes
and set the new proper compatible corresponding.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 arch/arm/boot/dts/stih410-clock.dtsi | 95 ++--------------------------
 1 file changed, 6 insertions(+), 89 deletions(-)

diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index 81a8c25d7ba5..04b0d7080353 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -83,16 +83,12 @@
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-a0";
 
 				#clock-cells = <1>;
 
 				clocks = <&clk_s_a0_pll 0>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-ic-lmi0",
-						     "clk-ic-lmi1";
-				clock-critical = <CLK_IC_LMI0>;
 			};
 		};
 
@@ -135,7 +131,7 @@
 
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-c0";
 
 				clocks = <&clk_s_c0_pll0 0>,
 					 <&clk_s_c0_pll1 0>,
@@ -145,52 +141,6 @@
 					 <&clk_s_c0_quadfs 3>,
 					 <&clk_sysin>;
 
-				clock-output-names = "clk-icn-gpu",
-						     "clk-fdma",
-						     "clk-nand",
-						     "clk-hva",
-						     "clk-proc-stfe",
-						     "clk-proc-tp",
-						     "clk-rx-icn-dmu",
-						     "clk-rx-icn-hva",
-						     "clk-icn-cpu",
-						     "clk-tx-icn-dmu",
-						     "clk-mmc-0",
-						     "clk-mmc-1",
-						     "clk-jpegdec",
-						     "clk-ext2fa9",
-						     "clk-ic-bdisp-0",
-						     "clk-ic-bdisp-1",
-						     "clk-pp-dmu",
-						     "clk-vid-dmu",
-						     "clk-dss-lpc",
-						     "clk-st231-aud-0",
-						     "clk-st231-gp-1",
-						     "clk-st231-dmu",
-						     "clk-icn-lmi",
-						     "clk-tx-icn-disp-1",
-						     "clk-icn-sbc",
-						     "clk-stfe-frc2",
-						     "clk-eth-phy",
-						     "clk-eth-ref-phyclk",
-						     "clk-flash-promip",
-						     "clk-main-disp",
-						     "clk-aux-disp",
-						     "clk-compo-dvp",
-						     "clk-tx-icn-hades",
-						     "clk-rx-icn-hades",
-						     "clk-icn-reg-16",
-						     "clk-pp-hades",
-						     "clk-clust-hades",
-						     "clk-hwpe-hades",
-						     "clk-fc-hades";
-				clock-critical = <CLK_PROC_STFE>,
-						 <CLK_ICN_CPU>,
-						 <CLK_TX_ICN_DMU>,
-						 <CLK_EXT2F_A9>,
-						 <CLK_ICN_LMI>,
-						 <CLK_ICN_SBC>;
-
 				/*
 				 * ARM Peripheral clock for timers
 				 */
@@ -227,20 +177,13 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-audio", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-d0";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
 					 <&clk_s_d0_quadfs 2>,
 					 <&clk_s_d0_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-pcm-0",
-						     "clk-pcm-1",
-						     "clk-pcm-2",
-						     "clk-spdiff",
-						     "clk-pcmr10-master",
-						     "clk-usb2-phy";
 			};
 		};
 
@@ -263,7 +206,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-video", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d2";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -272,24 +215,7 @@
 					 <&clk_sysin>,
 					 <&clk_sysin>,
 					 <&clk_tmdsout_hdmi>;
-
-				clock-output-names = "clk-pix-main-disp",
-						     "clk-pix-pip",
-						     "clk-pix-gdp1",
-						     "clk-pix-gdp2",
-						     "clk-pix-gdp3",
-						     "clk-pix-gdp4",
-						     "clk-pix-aux-disp",
-						     "clk-denc",
-						     "clk-pix-hddac",
-						     "clk-hddac",
-						     "clk-sddac",
-						     "clk-pix-dvo",
-						     "clk-dvo",
-						     "clk-pix-hdmi",
-						     "clk-tmds-hdmi",
-						     "clk-ref-hdmiphy";
-						     };
+			};
 		};
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
@@ -311,22 +237,13 @@
 
 			clk_s_d3_flexgen: clk-s-d3-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d3";
 
 				clocks = <&clk_s_d3_quadfs 0>,
 					 <&clk_s_d3_quadfs 1>,
 					 <&clk_s_d3_quadfs 2>,
 					 <&clk_s_d3_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-stfe-frc1",
-						     "clk-tsout-0",
-						     "clk-tsout-1",
-						     "clk-mchi",
-						     "clk-vsens-compo",
-						     "clk-frc1-remote",
-						     "clk-lpc-0",
-						     "clk-lpc-1";
 			};
 		};
 	};
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 11/16] ARM: dts: sti: update clkgen-pll entries in stih407-clock

[Alain Volmat]

The clkgen-pll driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 arch/arm/boot/dts/stih407-clock.dtsi | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index ecd568777e5f..2603226a6ca8 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -36,8 +36,6 @@
 				compatible = "st,stih407-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clockgen-a9-pll-odf";
 			};
 		};
 
@@ -74,12 +72,9 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-a0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-pll-ofd-0";
-				clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
@@ -112,21 +107,16 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll0-odf-0";
-				clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
 			};
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll1";
+				compatible = "st,clkgen-pll1-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll1-odf-0";
 			};
 
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
-- 
2.17.1

[PATCH v2 11/16] ARM: dts: sti: update clkgen-pll entries in stih407-clock

[Alain Volmat]

The clkgen-pll driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 arch/arm/boot/dts/stih407-clock.dtsi | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index ecd568777e5f..2603226a6ca8 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -36,8 +36,6 @@
 				compatible = "st,stih407-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clockgen-a9-pll-odf";
 			};
 		};
 
@@ -74,12 +72,9 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-a0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-pll-ofd-0";
-				clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
@@ -112,21 +107,16 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll0-odf-0";
-				clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
 			};
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll1";
+				compatible = "st,clkgen-pll1-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll1-odf-0";
 			};
 
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 12/16] ARM: dts: sti: update clkgen-pll entries in stih410-clock

[Alain Volmat]

The clkgen-pll driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 arch/arm/boot/dts/stih410-clock.dtsi | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index 04b0d7080353..3aeabdd6e305 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -39,8 +39,6 @@
 				compatible = "st,stih407-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clockgen-a9-pll-odf";
 			};
 		};
 
@@ -74,12 +72,9 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-a0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-pll-ofd-0";
-				clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
@@ -112,21 +107,16 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll0-odf-0";
-				clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
 			};
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll1";
+				compatible = "st,clkgen-pll1-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll1-odf-0";
 			};
 
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
-- 
2.17.1

[PATCH v2 12/16] ARM: dts: sti: update clkgen-pll entries in stih410-clock

[Alain Volmat]

The clkgen-pll driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 arch/arm/boot/dts/stih410-clock.dtsi | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index 04b0d7080353..3aeabdd6e305 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -39,8 +39,6 @@
 				compatible = "st,stih407-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clockgen-a9-pll-odf";
 			};
 		};
 
@@ -74,12 +72,9 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-a0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-pll-ofd-0";
-				clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
@@ -112,21 +107,16 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll0-odf-0";
-				clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
 			};
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll1";
+				compatible = "st,clkgen-pll1-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll1-odf-0";
 			};
 
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 13/16] ARM: dts: sti: update clkgen-pll entries in stih418-clock

[Alain Volmat]

The clkgen-pll driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 arch/arm/boot/dts/stih418-clock.dtsi | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index 35d12979cdf4..d628e656458d 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -39,8 +39,6 @@
 				compatible = "st,stih418-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clockgen-a9-pll-odf";
 			};
 		};
 
@@ -75,11 +73,9 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-a0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-pll-ofd-0";
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
@@ -111,20 +107,16 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll0-odf-0";
 			};
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll1";
+				compatible = "st,clkgen-pll1-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll1-odf-0";
 			};
 
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
-- 
2.17.1

[PATCH v2 13/16] ARM: dts: sti: update clkgen-pll entries in stih418-clock

[Alain Volmat]

The clkgen-pll driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 arch/arm/boot/dts/stih418-clock.dtsi | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index 35d12979cdf4..d628e656458d 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -39,8 +39,6 @@
 				compatible = "st,stih418-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clockgen-a9-pll-odf";
 			};
 		};
 
@@ -75,11 +73,9 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-a0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-pll-ofd-0";
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
@@ -111,20 +107,16 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll0-odf-0";
 			};
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll1";
+				compatible = "st,clkgen-pll1-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll1-odf-0";
 			};
 
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 14/16] ARM: dts: sti: update clkgen-fsyn entries in stih407-clock

[Alain Volmat]

The clkgen-fsyn driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 arch/arm/boot/dts/stih407-clock.dtsi | 27 +++------------------------
 1 file changed, 3 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index 2603226a6ca8..9cce9541e26b 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -93,12 +93,6 @@
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-c0-fs0-ch0",
-					     "clk-s-c0-fs0-ch1",
-					     "clk-s-c0-fs0-ch2",
-					     "clk-s-c0-fs0-ch3";
-			clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
 		};
 
 		clk_s_c0: clockgen-c@9103000 {
@@ -150,15 +144,10 @@
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d0";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d0-fs0-ch0",
-					     "clk-s-d0-fs0-ch1",
-					     "clk-s-d0-fs0-ch2",
-					     "clk-s-d0-fs0-ch3";
 		};
 
 		clockgen-d0@9104000 {
@@ -179,15 +168,10 @@
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d2";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d2-fs0-ch0",
-					     "clk-s-d2-fs0-ch1",
-					     "clk-s-d2-fs0-ch2",
-					     "clk-s-d2-fs0-ch3";
 		};
 
 		clockgen-d2@9106000 {
@@ -210,15 +194,10 @@
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d3";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d3-fs0-ch0",
-					     "clk-s-d3-fs0-ch1",
-					     "clk-s-d3-fs0-ch2",
-					     "clk-s-d3-fs0-ch3";
 		};
 
 		clockgen-d3@9107000 {
-- 
2.17.1

[PATCH v2 14/16] ARM: dts: sti: update clkgen-fsyn entries in stih407-clock

[Alain Volmat]

The clkgen-fsyn driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 arch/arm/boot/dts/stih407-clock.dtsi | 27 +++------------------------
 1 file changed, 3 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index 2603226a6ca8..9cce9541e26b 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -93,12 +93,6 @@
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-c0-fs0-ch0",
-					     "clk-s-c0-fs0-ch1",
-					     "clk-s-c0-fs0-ch2",
-					     "clk-s-c0-fs0-ch3";
-			clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
 		};
 
 		clk_s_c0: clockgen-c@9103000 {
@@ -150,15 +144,10 @@
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d0";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d0-fs0-ch0",
-					     "clk-s-d0-fs0-ch1",
-					     "clk-s-d0-fs0-ch2",
-					     "clk-s-d0-fs0-ch3";
 		};
 
 		clockgen-d0@9104000 {
@@ -179,15 +168,10 @@
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d2";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d2-fs0-ch0",
-					     "clk-s-d2-fs0-ch1",
-					     "clk-s-d2-fs0-ch2",
-					     "clk-s-d2-fs0-ch3";
 		};
 
 		clockgen-d2@9106000 {
@@ -210,15 +194,10 @@
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d3";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d3-fs0-ch0",
-					     "clk-s-d3-fs0-ch1",
-					     "clk-s-d3-fs0-ch2",
-					     "clk-s-d3-fs0-ch3";
 		};
 
 		clockgen-d3@9107000 {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 15/16] ARM: dts: sti: update clkgen-fsyn entries in stih410-clock

[Alain Volmat]

The clkgen-fsyn driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 arch/arm/boot/dts/stih410-clock.dtsi | 27 +++------------------------
 1 file changed, 3 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index 3aeabdd6e305..6b0e6d4477a3 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -93,12 +93,6 @@
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-c0-fs0-ch0",
-					     "clk-s-c0-fs0-ch1",
-					     "clk-s-c0-fs0-ch2",
-					     "clk-s-c0-fs0-ch3";
-			clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
 		};
 
 		clk_s_c0: clockgen-c@9103000 {
@@ -150,15 +144,10 @@
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d0";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d0-fs0-ch0",
-					     "clk-s-d0-fs0-ch1",
-					     "clk-s-d0-fs0-ch2",
-					     "clk-s-d0-fs0-ch3";
 		};
 
 		clockgen-d0@9104000 {
@@ -179,15 +168,10 @@
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d2";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d2-fs0-ch0",
-					     "clk-s-d2-fs0-ch1",
-					     "clk-s-d2-fs0-ch2",
-					     "clk-s-d2-fs0-ch3";
 		};
 
 		clockgen-d2@9106000 {
@@ -210,15 +194,10 @@
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d3";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d3-fs0-ch0",
-					     "clk-s-d3-fs0-ch1",
-					     "clk-s-d3-fs0-ch2",
-					     "clk-s-d3-fs0-ch3";
 		};
 
 		clockgen-d3@9107000 {
-- 
2.17.1

[PATCH v2 15/16] ARM: dts: sti: update clkgen-fsyn entries in stih410-clock

[Alain Volmat]

The clkgen-fsyn driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 arch/arm/boot/dts/stih410-clock.dtsi | 27 +++------------------------
 1 file changed, 3 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index 3aeabdd6e305..6b0e6d4477a3 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -93,12 +93,6 @@
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-c0-fs0-ch0",
-					     "clk-s-c0-fs0-ch1",
-					     "clk-s-c0-fs0-ch2",
-					     "clk-s-c0-fs0-ch3";
-			clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
 		};
 
 		clk_s_c0: clockgen-c@9103000 {
@@ -150,15 +144,10 @@
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d0";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d0-fs0-ch0",
-					     "clk-s-d0-fs0-ch1",
-					     "clk-s-d0-fs0-ch2",
-					     "clk-s-d0-fs0-ch3";
 		};
 
 		clockgen-d0@9104000 {
@@ -179,15 +168,10 @@
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d2";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d2-fs0-ch0",
-					     "clk-s-d2-fs0-ch1",
-					     "clk-s-d2-fs0-ch2",
-					     "clk-s-d2-fs0-ch3";
 		};
 
 		clockgen-d2@9106000 {
@@ -210,15 +194,10 @@
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d3";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d3-fs0-ch0",
-					     "clk-s-d3-fs0-ch1",
-					     "clk-s-d3-fs0-ch2",
-					     "clk-s-d3-fs0-ch3";
 		};
 
 		clockgen-d3@9107000 {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 16/16] ARM: dts: sti: update clkgen-fsyn entries in stih418-clock

[Alain Volmat]

The clkgen-fsyn driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 arch/arm/boot/dts/stih418-clock.dtsi | 26 +++-----------------------
 1 file changed, 3 insertions(+), 23 deletions(-)

diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index d628e656458d..e84c476b83ed 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -94,11 +94,6 @@
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-c0-fs0-ch0",
-					     "clk-s-c0-fs0-ch1",
-					     "clk-s-c0-fs0-ch2",
-					     "clk-s-c0-fs0-ch3";
 		};
 
 		clk_s_c0: clockgen-c@9103000 {
@@ -150,15 +145,10 @@
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d0";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d0-fs0-ch0",
-					     "clk-s-d0-fs0-ch1",
-					     "clk-s-d0-fs0-ch2",
-					     "clk-s-d0-fs0-ch3";
 		};
 
 		clockgen-d0@9104000 {
@@ -179,15 +169,10 @@
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d2";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d2-fs0-ch0",
-					     "clk-s-d2-fs0-ch1",
-					     "clk-s-d2-fs0-ch2",
-					     "clk-s-d2-fs0-ch3";
 		};
 
 		clockgen-d2@9106000 {
@@ -210,15 +195,10 @@
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d3";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d3-fs0-ch0",
-					     "clk-s-d3-fs0-ch1",
-					     "clk-s-d3-fs0-ch2",
-					     "clk-s-d3-fs0-ch3";
 		};
 
 		clockgen-d3@9107000 {
-- 
2.17.1

[PATCH v2 16/16] ARM: dts: sti: update clkgen-fsyn entries in stih418-clock

[Alain Volmat]

The clkgen-fsyn driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
 arch/arm/boot/dts/stih418-clock.dtsi | 26 +++-----------------------
 1 file changed, 3 insertions(+), 23 deletions(-)

diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index d628e656458d..e84c476b83ed 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -94,11 +94,6 @@
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-c0-fs0-ch0",
-					     "clk-s-c0-fs0-ch1",
-					     "clk-s-c0-fs0-ch2",
-					     "clk-s-c0-fs0-ch3";
 		};
 
 		clk_s_c0: clockgen-c@9103000 {
@@ -150,15 +145,10 @@
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d0";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d0-fs0-ch0",
-					     "clk-s-d0-fs0-ch1",
-					     "clk-s-d0-fs0-ch2",
-					     "clk-s-d0-fs0-ch3";
 		};
 
 		clockgen-d0@9104000 {
@@ -179,15 +169,10 @@
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d2";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d2-fs0-ch0",
-					     "clk-s-d2-fs0-ch1",
-					     "clk-s-d2-fs0-ch2",
-					     "clk-s-d2-fs0-ch3";
 		};
 
 		clockgen-d2@9106000 {
@@ -210,15 +195,10 @@
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d3";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d3-fs0-ch0",
-					     "clk-s-d3-fs0-ch1",
-					     "clk-s-d3-fs0-ch2",
-					     "clk-s-d3-fs0-ch3";
 		};
 
 		clockgen-d3@9107000 {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 03/16] dt-bindings: clock: st: flexgen: add new introduced compatible

[Rob Herring]

On Thu, 25 Mar 2021 08:50:05 +0100, Alain Volmat wrote:
> New compatible are added, supporting various kind of flexgen in
> STiH407, STiH410 and STiH418
> 
> Signed-off-by: Alain Volmat <avolmat@me.com>
> ---
>  .../devicetree/bindings/clock/st/st,flexgen.txt        | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 03/16] dt-bindings: clock: st: flexgen: add new introduced compatible

[Rob Herring]

On Thu, 25 Mar 2021 08:50:05 +0100, Alain Volmat wrote:
> New compatible are added, supporting various kind of flexgen in
> STiH407, STiH410 and STiH418
> 
> Signed-off-by: Alain Volmat <avolmat@me.com>
> ---
>  .../devicetree/bindings/clock/st/st,flexgen.txt        | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 05/16] dt-bindings: clock: st: clkgen-pll: add new introduced compatible

[Rob Herring]

On Thu, 25 Mar 2021 08:50:07 +0100, Alain Volmat wrote:
> New compatible are added, supporting various kind of clkgen-pll
> used for STiH407, STiH410 and STiH418
> 
> Signed-off-by: Alain Volmat <avolmat@me.com>
> ---
>  Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt | 3 +++
>  1 file changed, 3 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 05/16] dt-bindings: clock: st: clkgen-pll: add new introduced compatible

[Rob Herring]

On Thu, 25 Mar 2021 08:50:07 +0100, Alain Volmat wrote:
> New compatible are added, supporting various kind of clkgen-pll
> used for STiH407, STiH410 and STiH418
> 
> Signed-off-by: Alain Volmat <avolmat@me.com>
> ---
>  Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt | 3 +++
>  1 file changed, 3 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 00/16] clk: st: embed clock outputs within drivers

[Stephen Boyd]

Quoting Alain Volmat (2021-03-25 00:50:02)
> Most of ST clock drivers used by STi platform are updated in
> order to introduce clock outputs informations within each drivers
> and thus allow to avoid having to rely on clock-output-names properties
> within DT clock nodes.
> For that purpose, drivers are updated to allow handling both modes
> (with or without clock-output-names).
> Once all DT will have been updated, the legacy mode could be removed
> from the drivers.
> This will also allow, once all STi DT will be corrected, to remove the
> of_clk_detect_critical API from clk core code since STi clock drivers
> are the only drivers using this API.
> 
> This serie also contains modifications within STi DTS in order to use
> the newly introduced compatible and remove clock-output-names
> properties.

Can you split the dts changes from the driver changes and only send the
clk driver changes to clk maintainers? I don't intend to apply dts file
changes to the clk tree. Those can go via arm-soc based on some
immutable branch that lives in clk tree until next merge window closes.

> 
> Alain Volmat (16):
>   clk: st: clkgen-pll: remove used variable of struct clkgen_pll
>   clk: st: flexgen: embed soc clock outputs within compatible data
>   dt-bindings: clock: st: flexgen: add new introduced compatible
>   clk: st: clkgen-pll: embed soc clock outputs within compatible data
>   dt-bindings: clock: st: clkgen-pll: add new introduced compatible
>   clk: st: clkgen-fsyn: embed soc clock outputs within compatible data
>   dt-bindings: clock: st: clkgen-fsyn: add new introduced compatible
>   ARM: dts: sti: update flexgen compatible within stih418-clock
>   ARM: dts: sti: update flexgen compatible within stih407-clock
>   ARM: dts: sti: update flexgen compatible within stih410-clock
>   ARM: dts: sti: update clkgen-pll entries in stih407-clock
>   ARM: dts: sti: update clkgen-pll entries in stih410-clock
>   ARM: dts: sti: update clkgen-pll entries in stih418-clock
>   ARM: dts: sti: update clkgen-fsyn entries in stih407-clock
>   ARM: dts: sti: update clkgen-fsyn entries in stih410-clock
>   ARM: dts: sti: update clkgen-fsyn entries in stih418-clock
> 
>  .../bindings/clock/st/st,clkgen-pll.txt       |   3 +
>  .../bindings/clock/st/st,flexgen.txt          |  10 +
>  .../bindings/clock/st/st,quadfs.txt           |   3 +
>  arch/arm/boot/dts/stih407-clock.dtsi          | 128 +------
>  arch/arm/boot/dts/stih410-clock.dtsi          | 138 +------
>  arch/arm/boot/dts/stih418-clock.dtsi          | 136 +------
>  drivers/clk/st/clk-flexgen.c                  | 344 +++++++++++++++++-
>  drivers/clk/st/clkgen-fsyn.c                  | 113 +++++-
>  drivers/clk/st/clkgen-pll.c                   | 121 +++++-
>  9 files changed, 588 insertions(+), 408 deletions(-)
> 
> ---
> v2: fix drivers to update some clocks as CLK_IS_CRITICAL
> 

Please document in the code why CLK_IS_CRITICAL is used. For example,
"This clk needs to be on so the CPU can keep fetching instructions from
memory" or something like that.

Re: [PATCH v2 00/16] clk: st: embed clock outputs within drivers

[Stephen Boyd]

Quoting Alain Volmat (2021-03-25 00:50:02)
> Most of ST clock drivers used by STi platform are updated in
> order to introduce clock outputs informations within each drivers
> and thus allow to avoid having to rely on clock-output-names properties
> within DT clock nodes.
> For that purpose, drivers are updated to allow handling both modes
> (with or without clock-output-names).
> Once all DT will have been updated, the legacy mode could be removed
> from the drivers.
> This will also allow, once all STi DT will be corrected, to remove the
> of_clk_detect_critical API from clk core code since STi clock drivers
> are the only drivers using this API.
> 
> This serie also contains modifications within STi DTS in order to use
> the newly introduced compatible and remove clock-output-names
> properties.

Can you split the dts changes from the driver changes and only send the
clk driver changes to clk maintainers? I don't intend to apply dts file
changes to the clk tree. Those can go via arm-soc based on some
immutable branch that lives in clk tree until next merge window closes.

> 
> Alain Volmat (16):
>   clk: st: clkgen-pll: remove used variable of struct clkgen_pll
>   clk: st: flexgen: embed soc clock outputs within compatible data
>   dt-bindings: clock: st: flexgen: add new introduced compatible
>   clk: st: clkgen-pll: embed soc clock outputs within compatible data
>   dt-bindings: clock: st: clkgen-pll: add new introduced compatible
>   clk: st: clkgen-fsyn: embed soc clock outputs within compatible data
>   dt-bindings: clock: st: clkgen-fsyn: add new introduced compatible
>   ARM: dts: sti: update flexgen compatible within stih418-clock
>   ARM: dts: sti: update flexgen compatible within stih407-clock
>   ARM: dts: sti: update flexgen compatible within stih410-clock
>   ARM: dts: sti: update clkgen-pll entries in stih407-clock
>   ARM: dts: sti: update clkgen-pll entries in stih410-clock
>   ARM: dts: sti: update clkgen-pll entries in stih418-clock
>   ARM: dts: sti: update clkgen-fsyn entries in stih407-clock
>   ARM: dts: sti: update clkgen-fsyn entries in stih410-clock
>   ARM: dts: sti: update clkgen-fsyn entries in stih418-clock
> 
>  .../bindings/clock/st/st,clkgen-pll.txt       |   3 +
>  .../bindings/clock/st/st,flexgen.txt          |  10 +
>  .../bindings/clock/st/st,quadfs.txt           |   3 +
>  arch/arm/boot/dts/stih407-clock.dtsi          | 128 +------
>  arch/arm/boot/dts/stih410-clock.dtsi          | 138 +------
>  arch/arm/boot/dts/stih418-clock.dtsi          | 136 +------
>  drivers/clk/st/clk-flexgen.c                  | 344 +++++++++++++++++-
>  drivers/clk/st/clkgen-fsyn.c                  | 113 +++++-
>  drivers/clk/st/clkgen-pll.c                   | 121 +++++-
>  9 files changed, 588 insertions(+), 408 deletions(-)
> 
> ---
> v2: fix drivers to update some clocks as CLK_IS_CRITICAL
> 

Please document in the code why CLK_IS_CRITICAL is used. For example,
"This clk needs to be on so the CPU can keep fetching instructions from
memory" or something like that.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel