[PATCH v3 00/10] board: toradex: verdin-imx8mm: target refresh

[PATCH v3 00/10] board: toradex: verdin-imx8mm: target refresh

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>


An assortment of fixes and improvements like an Ethernet PHY
configuration fix, DEK blob encapsulation preparation, migration to
using binman to pack images, SLEEP_MOCI# enablement, dropping of V1.0
hardware support [1], renaming kernel image variable, using preboot
for fdtfile evaluation and watchdog pinctrl fix.

Note that this series is applied on top of Peng's Makefile fix [2] as
otherwise, it may not quite generate all binman artefacts in the right
order as discussed here [3].

[1] https://developer.toradex.com/verdin-sample-phase-over
[2] https://marc.info/?l=u-boot&m=162908373904742
[3] https://marc.info/?l=u-boot&m=162945614207220

Changes in v3:
- Case fold hex string.
- Revert binman part of imx8mm-verdin-u-boot.dtsi to a plain copy from
  imx8mm-evk and postpone further improvements to after migrating to a
  common binman config as agreed with Frieder and Simon.
- New patch cleaning up include order.
- Add Fabio's reviewed-by tag.
- Fix patch.
- Add missing apalis-imx8 part.
- While at it update copyright year resp. period.
- Fix closing endif comment.

Changes in v2:
- Explicitly pass filename to binman when generating binaries as
  suggested by Heiko.
- Use proper intermediate binary u-boot-spl-ddr.bin for imximage as
  pointed out by Heiko.
- Drop first patch ("imx: mkimage_fit_atf: fix legacy image generation")
  as a similar fix was already refused earlier.
- New patch allows booting recent embedded Linux BSPs.
- New patch addressing dynamic fdtfile definition.
- New patch fixing watchdog pinctrl issue.

Igor Opaniuk (1):
  verdin-imx8mm: use preboot for fdtfile evaluation

Marcel Ziswiler (6):
  imx8m: clean-up kconfig indentation
  verdin-imx8mm: fix ethernet
  ARM: dts: imx8mm-verdin: prepare for dek blob encapsulation
  verdin-imx8mm: switch to use binman to pack images
  verdin-imx8mm: clean-up include order
  verdin-imx8mm: fix watchdog pinctrl issue

Max Krummenacher (2):
  verdin-imx8mm: enable sleep_moci output
  verdin-imx8mm: drop support for v1.0 hardware

Oleksandr Suvorov (1):
  include/configs: apalis-imx8/verdin-imx8mm: rename kernel image
    variable

 arch/arm/dts/imx8mm-verdin-u-boot.dtsi      | 135 +++++++++++++++++++-
 arch/arm/dts/imx8mm-verdin.dts              |  20 ++-
 arch/arm/mach-imx/imx8m/Kconfig             |  21 +--
 board/toradex/verdin-imx8mm/imximage.cfg    |  11 +-
 board/toradex/verdin-imx8mm/verdin-imx8mm.c |  81 +-----------
 configs/verdin-imx8mm_defconfig             |   6 +-
 doc/board/toradex/verdin-imx8mm.rst         |  53 ++++----
 include/configs/apalis-imx8.h               |   6 +-
 include/configs/verdin-imx8mm.h             |  11 +-
 9 files changed, 215 insertions(+), 129 deletions(-)

-- 
2.26.2

[PATCH v3 01/10] imx8m: clean-up kconfig indentation

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Replace spurious spaces with proper tabs.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
---

(no changes since v1)

 arch/arm/mach-imx/imx8m/Kconfig | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index 1d08a2977f5..a2ba30cf332 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -25,14 +25,14 @@ config SYS_SOC
 	default "imx8m"
 
 choice
-	prompt  "NXP i.MX8M board select"
+	prompt "NXP i.MX8M board select"
 	optional
 
 config TARGET_IMX8MQ_CM
-        bool "Ronetix iMX8MQ-CM SoM"
+	bool "Ronetix iMX8MQ-CM SoM"
 		select BINMAN
-        select IMX8MQ
-        select IMX8M_LPDDR4
+	select IMX8MQ
+	select IMX8M_LPDDR4
 
 config TARGET_IMX8MQ_EVK
 	bool "imx8mq_evk"
@@ -105,10 +105,10 @@ config TARGET_PICO_IMX8MQ
 	select IMX8M_LPDDR4
 
 config TARGET_VERDIN_IMX8MM
-       bool "Support Toradex Verdin iMX8M Mini module"
-       select IMX8MM
-       select SUPPORT_SPL
-       select IMX8M_LPDDR4
+	bool "Support Toradex Verdin iMX8M Mini module"
+	select IMX8MM
+	select SUPPORT_SPL
+	select IMX8M_LPDDR4
 
 config TARGET_IMX8MM_BEACON
 	bool "imx8mm Beacon Embedded devkit"
@@ -125,14 +125,14 @@ config TARGET_IMX8MN_BEACON
 config TARGET_PHYCORE_IMX8MM
 	bool "PHYTEC PHYCORE i.MX8MM"
 	select IMX8MM
-        select SUPPORT_SPL
+	select SUPPORT_SPL
 	select IMX8M_LPDDR4
 
 config TARGET_PHYCORE_IMX8MP
 	bool "PHYTEC PHYCORE i.MX8MP"
 	select BINMAN
 	select IMX8MP
-        select SUPPORT_SPL
+	select SUPPORT_SPL
 	select IMX8M_LPDDR4
 
 config TARGET_IMX8MM_CL_IOT_GATE
-- 
2.26.2

[PATCH v3 02/10] verdin-imx8mm: fix ethernet

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Turns out Microship (formerly Micrel) meanwhile integrated proper
support for the DLL setup on their KSZ9131. Unfortunately, this
conflicts with our previous board code doing that.
Fix this by getting rid of our board code and just relying on the
generic implementation relying on rgmii-id being used as phy-mode.

Fixes: commit c6df0e2ffdc4
       ("net: phy: micrel: add support for DLL setup on ksz9131")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
---

(no changes since v1)

 arch/arm/dts/imx8mm-verdin.dts              |  2 +-
 board/toradex/verdin-imx8mm/verdin-imx8mm.c | 64 ---------------------
 2 files changed, 1 insertion(+), 65 deletions(-)

diff --git a/arch/arm/dts/imx8mm-verdin.dts b/arch/arm/dts/imx8mm-verdin.dts
index fb0756d6e19..ac2a4b69d3c 100644
--- a/arch/arm/dts/imx8mm-verdin.dts
+++ b/arch/arm/dts/imx8mm-verdin.dts
@@ -160,7 +160,7 @@
 &fec1 {
 	fsl,magic-packet;
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_ethphy>;
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&pinctrl_fec1>;
diff --git a/board/toradex/verdin-imx8mm/verdin-imx8mm.c b/board/toradex/verdin-imx8mm/verdin-imx8mm.c
index 76f4a1e209a..1644f4b3081 100644
--- a/board/toradex/verdin-imx8mm/verdin-imx8mm.c
+++ b/board/toradex/verdin-imx8mm/verdin-imx8mm.c
@@ -36,70 +36,6 @@ static int setup_fec(void)
 
 	return 0;
 }
-
-int board_phy_config(struct phy_device *phydev)
-{
-	int tmp;
-
-	switch (ksz9xx1_phy_get_id(phydev) & MII_KSZ9x31_SILICON_REV_MASK) {
-	case PHY_ID_KSZ9031:
-		/*
-		 * The PHY adds 1.2ns for the RXC and 0ns for TXC clock by
-		 * default. The MAC and the layout don't add a skew between
-		 * clock and data.
-		 * Add 0.3ns for the RXC path and 0.96 + 0.42 ns (1.38 ns) for
-		 * the TXC path to get the required clock skews.
-		 */
-		/* control data pad skew - devaddr = 0x02, register = 0x04 */
-		ksz9031_phy_extended_write(phydev, 0x02,
-					   MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW,
-					   MII_KSZ9031_MOD_DATA_NO_POST_INC,
-					   0x0070);
-		/* rx data pad skew - devaddr = 0x02, register = 0x05 */
-		ksz9031_phy_extended_write(phydev, 0x02,
-					   MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW,
-					   MII_KSZ9031_MOD_DATA_NO_POST_INC,
-					   0x7777);
-		/* tx data pad skew - devaddr = 0x02, register = 0x06 */
-		ksz9031_phy_extended_write(phydev, 0x02,
-					   MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW,
-					   MII_KSZ9031_MOD_DATA_NO_POST_INC,
-					   0x0000);
-		/* gtx and rx clock pad skew - devaddr = 0x02,register = 0x08 */
-		ksz9031_phy_extended_write(phydev, 0x02,
-					   MII_KSZ9031_EXT_RGMII_CLOCK_SKEW,
-					   MII_KSZ9031_MOD_DATA_NO_POST_INC,
-					   0x03f4);
-		break;
-	case PHY_ID_KSZ9131:
-	default:
-		/* read rxc dll control - devaddr = 0x2, register = 0x4c */
-		tmp = ksz9031_phy_extended_read(phydev, 0x02,
-					MII_KSZ9131_EXT_RGMII_2NS_SKEW_RXDLL,
-					MII_KSZ9031_MOD_DATA_NO_POST_INC);
-		/* disable rxdll bypass (enable 2ns skew delay on RXC) */
-		tmp &= ~MII_KSZ9131_RXTXDLL_BYPASS;
-		/* rxc data pad skew 2ns - devaddr = 0x02, register = 0x4c */
-		tmp = ksz9031_phy_extended_write(phydev, 0x02,
-					MII_KSZ9131_EXT_RGMII_2NS_SKEW_RXDLL,
-					MII_KSZ9031_MOD_DATA_NO_POST_INC, tmp);
-		/* read txc dll control - devaddr = 0x02, register = 0x4d */
-		tmp = ksz9031_phy_extended_read(phydev, 0x02,
-					MII_KSZ9131_EXT_RGMII_2NS_SKEW_TXDLL,
-					MII_KSZ9031_MOD_DATA_NO_POST_INC);
-		/* disable txdll bypass (enable 2ns skew delay on TXC) */
-		tmp &= ~MII_KSZ9131_RXTXDLL_BYPASS;
-		/* rxc data pad skew 2ns - devaddr = 0x02, register = 0x4d */
-		tmp = ksz9031_phy_extended_write(phydev, 0x02,
-					MII_KSZ9131_EXT_RGMII_2NS_SKEW_TXDLL,
-					MII_KSZ9031_MOD_DATA_NO_POST_INC, tmp);
-		break;
-	}
-
-	if (phydev->drv->config)
-		phydev->drv->config(phydev);
-	return 0;
-}
 #endif
 
 int board_init(void)
-- 
2.26.2

[PATCH v3 03/10] ARM: dts: imx8mm-verdin: prepare for dek blob encapsulation

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Prepare for DEK blob encapsulation support through "dek_blob" command.
On ARMv8, u-boot runs in non-secure, thus cannot encapsulate a DEK blob
for encrypted boot.
The DEK blob is encapsulated by OP-TEE through a trusted application
call. U-boot sends and receives the DEK and the DEK blob binaries
through OP-TEE dynamic shared memory.

To enable the DEK blob encapsulation, add to the defconfig:
CONFIG_SECURE_BOOT=y
CONFIG_FAT_WRITE=y
CONFIG_CMD_DEKBLOB=y

Taken from NXP's commit 56d2050f4028 ("imx8m: Add DEK blob encapsulation
for imx8m").

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
---

(no changes since v1)

 arch/arm/dts/imx8mm-verdin-u-boot.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/dts/imx8mm-verdin-u-boot.dtsi b/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
index 67c31c49b6c..a97626fa0c1 100644
--- a/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
@@ -6,6 +6,13 @@
 #include "imx8mm-u-boot.dtsi"
 
 / {
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
 	wdt-reboot {
 		compatible = "wdt-reboot";
 		wdt = <&wdog1>;
-- 
2.26.2

[PATCH v3 04/10] verdin-imx8mm: switch to use binman to pack images

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Use binman to pack images.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

---

Changes in v3:
- Case fold hex string.
- Revert binman part of imx8mm-verdin-u-boot.dtsi to a plain copy from
  imx8mm-evk and postpone further improvements to after migrating to a
  common binman config as agreed with Frieder and Simon.

Changes in v2:
- Explicitly pass filename to binman when generating binaries as
  suggested by Heiko.
- Use proper intermediate binary u-boot-spl-ddr.bin for imximage as
  pointed out by Heiko.

 arch/arm/dts/imx8mm-verdin-u-boot.dtsi   | 124 ++++++++++++++++++++++-
 arch/arm/mach-imx/imx8m/Kconfig          |   1 +
 board/toradex/verdin-imx8mm/imximage.cfg |  11 +-
 configs/verdin-imx8mm_defconfig          |   2 +-
 doc/board/toradex/verdin-imx8mm.rst      |  53 +++++-----
 5 files changed, 157 insertions(+), 34 deletions(-)

diff --git a/arch/arm/dts/imx8mm-verdin-u-boot.dtsi b/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
index a97626fa0c1..0e041865021 100644
--- a/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
@@ -1,11 +1,15 @@
 // SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2020 Toradex
+ * Copyright 2021 Toradex
  */
 
 #include "imx8mm-u-boot.dtsi"
 
 / {
+	binman: binman {
+		multiple-images;
+	};
+
 	firmware {
 		optee {
 			compatible = "linaro,optee-tz";
@@ -91,3 +95,121 @@
 &wdog1 {
 	u-boot,dm-spl;
 };
+
+&binman {
+	 u-boot-spl-ddr {
+		filename = "u-boot-spl-ddr.bin";
+		pad-byte = <0xff>;
+		align-size = <4>;
+		align = <4>;
+
+		u-boot-spl {
+			align-end = <4>;
+		};
+
+		blob_1: blob-ext@1 {
+			filename = "lpddr4_pmu_train_1d_imem.bin";
+			size = <0x8000>;
+		};
+
+		blob_2: blob-ext@2 {
+			filename = "lpddr4_pmu_train_1d_dmem.bin";
+			size = <0x4000>;
+		};
+
+		blob_3: blob-ext@3 {
+			filename = "lpddr4_pmu_train_2d_imem.bin";
+			size = <0x8000>;
+		};
+
+		blob_4: blob-ext@4 {
+			filename = "lpddr4_pmu_train_2d_dmem.bin";
+			size = <0x4000>;
+		};
+	};
+
+	spl {
+		filename = "spl.bin";
+
+		mkimage {
+			args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000";
+
+			blob {
+				filename = "u-boot-spl-ddr.bin";
+			};
+		};
+	};
+
+	itb {
+		filename = "u-boot.itb";
+
+		fit {
+			description = "Configuration to load ATF before U-Boot";
+			#address-cells = <1>;
+			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+
+			images {
+				uboot {
+					description = "U-Boot (64-bit)";
+					type = "standalone";
+					arch = "arm64";
+					compression = "none";
+					load = <CONFIG_SYS_TEXT_BASE>;
+
+					uboot_blob: blob-ext {
+						filename = "u-boot-nodtb.bin";
+					};
+				};
+
+				atf {
+					description = "ARM Trusted Firmware";
+					type = "firmware";
+					arch = "arm64";
+					compression = "none";
+					load = <0x920000>;
+					entry = <0x920000>;
+
+					atf_blob: blob-ext {
+						filename = "bl31.bin";
+					};
+				};
+
+				fdt {
+					description = "NAME";
+					type = "flat_dt";
+					compression = "none";
+
+					uboot_fdt_blob: blob-ext {
+						filename = "u-boot.dtb";
+					};
+				};
+			};
+
+			configurations {
+				default = "conf";
+
+				conf {
+					description = "NAME";
+					firmware = "uboot";
+					loadables = "atf";
+					fdt = "fdt";
+				};
+			};
+		};
+	};
+
+	imx-boot {
+		filename = "flash.bin";
+		pad-byte = <0x00>;
+
+		spl: blob-ext@1 {
+			offset = <0x0>;
+			filename = "spl.bin";
+		};
+
+		uboot: blob-ext@2 {
+			offset = <0x5fc00>;
+			filename = "u-boot.itb";
+		};
+	};
+};
diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index a2ba30cf332..3eccc6b4d4f 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -106,6 +106,7 @@ config TARGET_PICO_IMX8MQ
 
 config TARGET_VERDIN_IMX8MM
 	bool "Support Toradex Verdin iMX8M Mini module"
+	select BINMAN
 	select IMX8MM
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
diff --git a/board/toradex/verdin-imx8mm/imximage.cfg b/board/toradex/verdin-imx8mm/imximage.cfg
index b8b25ff4201..2832e6ec029 100644
--- a/board/toradex/verdin-imx8mm/imximage.cfg
+++ b/board/toradex/verdin-imx8mm/imximage.cfg
@@ -1,16 +1,9 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2020 Toradex
+ * Copyright 2021 Toradex
  */
 
 #define __ASSEMBLY__
 
-FIT
 BOOT_FROM	emmc_fastboot
-LOADER		spl/u-boot-spl-ddr.bin	0x7E1000
-SECOND_LOADER	u-boot.itb		0x40200000 0x60000
-
-DDR_FW lpddr4_pmu_train_1d_imem.bin
-DDR_FW lpddr4_pmu_train_1d_dmem.bin
-DDR_FW lpddr4_pmu_train_2d_imem.bin
-DDR_FW lpddr4_pmu_train_2d_dmem.bin
+LOADER		u-boot-spl-ddr.bin	0x7e1000
diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig
index 624f1b99096..b323ceb19af 100644
--- a/configs/verdin-imx8mm_defconfig
+++ b/configs/verdin-imx8mm_defconfig
@@ -24,7 +24,7 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/verdin-imx8mm/imximage.cfg"
 # CONFIG_USE_BOOTCOMMAND is not set
diff --git a/doc/board/toradex/verdin-imx8mm.rst b/doc/board/toradex/verdin-imx8mm.rst
index b9f7dc39c96..a11c82da2f5 100644
--- a/doc/board/toradex/verdin-imx8mm.rst
+++ b/doc/board/toradex/verdin-imx8mm.rst
@@ -34,10 +34,10 @@ Get the DDR Firmware
 .. code-block:: bash
 
     $ cd ..
-    $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.4.1.bin
-    $ chmod +x firmware-imx-8.4.1.bin
-    $ ./firmware-imx-8.4.1.bin
-    $ cp firmware-imx-8.4.1/firmware/ddr/synopsys/lpddr4*.bin ./
+    $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.10.1.bin
+    $ chmod +x firmware-imx-8.10.1.bin
+    $ ./firmware-imx-8.10.1.bin
+    $ cp firmware-imx-8.10.1/firmware/ddr/synopsys/lpddr4*.bin ./
 
 Build U-Boot
 ------------
@@ -46,7 +46,7 @@ Build U-Boot
     $ export CROSS_COMPILE=aarch64-linux-gnu-
     $ export ATF_LOAD_ADDR=0x920000
     $ make verdin-imx8mm_defconfig
-    $ make flash.bin
+    $ make
 
 Flash to eMMC
 -------------
@@ -78,21 +78,28 @@ Output:
 
 .. code-block:: bash
 
-    U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
-    Normal Boot
-    Trying to boot from MMC1
-
-    U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
-
-    CPU:   Freescale i.MX8MMQ rev1.0 at 0 MHz
-    Reset cause: POR
-    DRAM:  2 GiB
-    MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
-    Loading Environment from MMC... OK
-    In:    serial
-    Out:   serial
-    Err:   serial
-    Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial:
-    Net:   eth0: ethernet@30be0000
-    Hit any key to stop autoboot:  0
-    Verdin iMX8MM #
+U-Boot SPL 2021.10-rc2-00028-gee010ba1129 (Aug 23 2021 - 16:56:02 +0200)
+Normal Boot
+WDT:   Started with servicing (60s timeout)
+Trying to boot from MMC1
+NOTICE:  BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b
+NOTICE:  BL31: Built : 18:02:12, Aug 16 2021
+
+
+U-Boot 2021.10-rc2-00028-gee010ba1129 (Aug 23 2021 - 16:56:02 +0200)
+
+CPU:   Freescale i.MX8MMQ rev1.0 at 1200 MHz
+Reset cause: POR
+DRAM:  2 GiB
+WDT:   Started with servicing (60s timeout)
+MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
+Loading Environment from MMC... OK
+In:    serial
+Out:   serial
+Err:   serial
+Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.1A, Serial# 06760554
+Carrier: Toradex Verdin Development Board V1.1A, Serial# 10754333
+Setting variant to wifi
+Net:   eth0: ethernet@30be0000
+Hit any key to stop autoboot:  0
+Verdin iMX8MM #
-- 
2.26.2

Re: [PATCH v3 04/10] verdin-imx8mm: switch to use binman to pack images

[Heiko Schocher]

Hello Marcel,

On 25.08.21 17:14, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> 
> Use binman to pack images.
> 
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
> Reviewed-by: Fabio Estevam <festevam@gmail.com>
> 
> ---
> 
> Changes in v3:
> - Case fold hex string.
> - Revert binman part of imx8mm-verdin-u-boot.dtsi to a plain copy from
>   imx8mm-evk and postpone further improvements to after migrating to a
>   common binman config as agreed with Frieder and Simon.
> 
> Changes in v2:
> - Explicitly pass filename to binman when generating binaries as
>   suggested by Heiko.
> - Use proper intermediate binary u-boot-spl-ddr.bin for imximage as
>   pointed out by Heiko.
> 
>  arch/arm/dts/imx8mm-verdin-u-boot.dtsi   | 124 ++++++++++++++++++++++-
>  arch/arm/mach-imx/imx8m/Kconfig          |   1 +
>  board/toradex/verdin-imx8mm/imximage.cfg |  11 +-
>  configs/verdin-imx8mm_defconfig          |   2 +-
>  doc/board/toradex/verdin-imx8mm.rst      |  53 +++++-----
>  5 files changed, 157 insertions(+), 34 deletions(-)

Reviewed-by: Heiko Schocher <hs@denx.de>

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs@denx.de

[PATCH v3 05/10] verdin-imx8mm: enable sleep_moci output

[Marcel Ziswiler]

From: Max Krummenacher <max.krummenacher@toradex.com>

This powers some peripherals on the carrier board e.g. the USB hub.

Related-to: ELB-3206
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
---

(no changes since v1)

 arch/arm/dts/imx8mm-verdin.dts  | 18 ++++++++++++++++++
 configs/verdin-imx8mm_defconfig |  1 +
 2 files changed, 19 insertions(+)

diff --git a/arch/arm/dts/imx8mm-verdin.dts b/arch/arm/dts/imx8mm-verdin.dts
index ac2a4b69d3c..a2331627d72 100644
--- a/arch/arm/dts/imx8mm-verdin.dts
+++ b/arch/arm/dts/imx8mm-verdin.dts
@@ -196,6 +196,18 @@
 	};
 };
 
+&gpio5 {
+	ctrl_sleep_moci {
+		gpio-hog;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		line-name = "CTRL_SLEEP_MOCI#";
+		output-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+	};
+};
+
 /* On-module I2C */
 &i2c1 {
 	clock-frequency = <400000>;
@@ -548,6 +560,12 @@
 		>;
 	};
 
+	pinctrl_ctrl_sleep_moci: ctrlsleepmocigrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1		0x1c4		/* SODIMM 256 */
+		>;
+	};
+
 	pinctrl_dsi_bkl_en: dsi_bkl_en {
 		fsl,pins = <
 			MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3	0x1c4		/* SODIMM 21 */
diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig
index b323ceb19af..ad9c00a3cc4 100644
--- a/configs/verdin-imx8mm_defconfig
+++ b/configs/verdin-imx8mm_defconfig
@@ -71,6 +71,7 @@ CONFIG_SPL_CLK_COMPOSITE_CCF=y
 CONFIG_CLK_COMPOSITE_CCF=y
 CONFIG_SPL_CLK_IMX8MM=y
 CONFIG_CLK_IMX8MM=y
+CONFIG_GPIO_HOG=y
 CONFIG_MXC_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_MXC=y
-- 
2.26.2

[PATCH v3 06/10] verdin-imx8mm: clean-up include order

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Alphabetically order includes.
While at it also update copyright year resp. period.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---

Changes in v3:
- New patch cleaning up include order.

 board/toradex/verdin-imx8mm/verdin-imx8mm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/toradex/verdin-imx8mm/verdin-imx8mm.c b/board/toradex/verdin-imx8mm/verdin-imx8mm.c
index 1644f4b3081..71ceb26e811 100644
--- a/board/toradex/verdin-imx8mm/verdin-imx8mm.c
+++ b/board/toradex/verdin-imx8mm/verdin-imx8mm.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright 2020 Toradex
+ * Copyright 2020-2021 Toradex
  */
 
 #include <common.h>
@@ -10,9 +10,9 @@
 #include <asm/global_data.h>
 #include <asm/io.h>
 #include <i2c.h>
+#include <micrel.h>
 #include <miiphy.h>
 #include <netdev.h>
-#include <micrel.h>
 
 #include "../common/tdx-cfg-block.h"
 
-- 
2.26.2

[PATCH v3 07/10] verdin-imx8mm: drop support for v1.0 hardware

[Marcel Ziswiler]

From: Max Krummenacher <max.krummenacher@toradex.com>

We drop support for Verdin iMX8M Mini V1.0B.

Related-to: ELB-3551
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

---

Changes in v3:
- Add Fabio's reviewed-by tag.

Changes in v2:
- Drop first patch ("imx: mkimage_fit_atf: fix legacy image generation")
  as a similar fix was already refused earlier.

 board/toradex/verdin-imx8mm/verdin-imx8mm.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/board/toradex/verdin-imx8mm/verdin-imx8mm.c b/board/toradex/verdin-imx8mm/verdin-imx8mm.c
index 71ceb26e811..c51c99b5156 100644
--- a/board/toradex/verdin-imx8mm/verdin-imx8mm.c
+++ b/board/toradex/verdin-imx8mm/verdin-imx8mm.c
@@ -9,6 +9,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/global_data.h>
 #include <asm/io.h>
+#include <hang.h>
 #include <i2c.h>
 #include <micrel.h>
 #include <miiphy.h>
@@ -87,17 +88,13 @@ static void select_dt_from_module_version(void)
 
 	switch (get_pcb_revision()) {
 	case PCB_VERSION_1_0:
-		printf("Detected a V1.0 module\n");
-		if (is_wifi)
-			strncpy(&variant[0], "wifi", sizeof(variant));
-		else
-			strncpy(&variant[0], "nonwifi", sizeof(variant));
-		break;
+		printf("Detected a V1.0 module which is no longer supported in this BSP version\n");
+		hang();
 	default:
 		if (is_wifi)
-			strncpy(&variant[0], "wifi-v1.1", sizeof(variant));
+			strlcpy(&variant[0], "wifi", sizeof(variant));
 		else
-			strncpy(&variant[0], "nonwifi-v1.1", sizeof(variant));
+			strlcpy(&variant[0], "nonwifi", sizeof(variant));
 		break;
 	}
 
-- 
2.26.2

[PATCH v3 08/10] include/configs: apalis-imx8/verdin-imx8mm: rename kernel image variable

[Marcel Ziswiler]

From: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>

Variable "kernel_image" is used in boot.scr script only, that sets its
own default value to the constant string @@KERNEL_IMAGETYPE@@ in case
"kernel_image" is not set.
The default name of the kernel image shipped with BSP 5.x is "Image.gz".
Setting kernel_image="Image" as a pre-defined u-boot variable
breaks booting systems with modern versions of boot.scr, whereas
renaming it fixes booting with modern scripts and does not break working
of earlier versions of boot.scr.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

---

Changes in v3:
- Fix patch.
- Add missing apalis-imx8 part.
- While at it update copyright year resp. period.
- Fix closing endif comment.

Changes in v2:
- New patch allows booting recent embedded Linux BSPs.

 include/configs/apalis-imx8.h   |  6 +++---
 include/configs/verdin-imx8mm.h | 11 +++++------
 2 files changed, 8 insertions(+), 9 deletions(-)

diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h
index b04a03f76da..1757f025fc5 100644
--- a/include/configs/apalis-imx8.h
+++ b/include/configs/apalis-imx8.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2019 Toradex
+ * Copyright 2019-2021 Toradex
  */
 
 #ifndef __APALIS_IMX8_H
@@ -44,12 +44,12 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
 	MEM_LAYOUT_ENV_SETTINGS \
+	"boot_file=Image\0" \
 	"console=ttyLP1 earlycon\0" \
 	"fdt_addr=0x83000000\0"	\
 	"fdt_file=fsl-imx8qm-apalis-eval.dtb\0" \
 	"fdtfile=fsl-imx8qm-apalis-eval.dtb\0" \
 	"finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
-	"image=Image\0" \
 	"initrd_addr=0x83800000\0" \
 	"initrd_high=0xffffffffffffffff\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
@@ -59,7 +59,7 @@
 	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
 		"\0" \
-	"nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \
+	"nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; tftp ${fdt_addr} " \
 		"apalis-imx8/${fdt_file}; booti ${loadaddr} - ${fdt_addr}\0" \
 	"panel=NULL\0" \
 	"script=boot.scr\0" \
diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index 7be5e5ddf11..d15a3e05fcc 100644
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2020 Toradex
+ * Copyright 2020-2021 Toradex
  */
 
 #ifndef __VERDIN_IMX8MM_H
@@ -57,16 +57,16 @@
 	BOOTENV \
 	MEM_LAYOUT_ENV_SETTINGS \
 	"bootcmd_mfg=fastboot 0\0" \
+	"boot_file=Image\0" \
 	"console=ttymxc0\0" \
 	"fdt_addr=0x43000000\0" \
-	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+	"fdt_board=dev\0" \
 	"initrd_addr=0x43800000\0" \
 	"initrd_high=0xffffffffffffffff\0" \
-	"kernel_image=Image\0" \
 	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
 		"\0" \
-	"nfsboot=run netargs; dhcp ${loadaddr} ${kernel_image}; " \
+	"nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; " \
 		"tftp ${fdt_addr} verdin/${fdtfile}; " \
 		"booti ${loadaddr} - ${fdt_addr}\0" \
 	"setup=setenv setupargs console=${console},${baudrate} " \
@@ -124,5 +124,4 @@
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 
-#endif /*_VERDIN_IMX8MM_H */
-
+#endif /* __VERDIN_IMX8MM_H */
-- 
2.26.2

[PATCH v3 09/10] verdin-imx8mm: use preboot for fdtfile evaluation

[Marcel Ziswiler]

From: Igor Opaniuk <igor.opaniuk@toradex.com>

Enable and set preboot var with fdtfile evaluation.
It will be checked and run immediately before starting the
CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp.
entering interactive mode.

This provides possibility to use different boot cmds in interactive mode
without manual setting fdtfile value, as it it's already evaluated
before entering interactive mode.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

---

(no changes since v2)

Changes in v2:
- New patch addressing dynamic fdtfile definition.

 configs/verdin-imx8mm_defconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig
index ad9c00a3cc4..ab549ebbada 100644
--- a/configs/verdin-imx8mm_defconfig
+++ b/configs/verdin-imx8mm_defconfig
@@ -28,7 +28,8 @@ CONFIG_SPL_LOAD_FIT=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/verdin-imx8mm/imximage.cfg"
 # CONFIG_USE_BOOTCOMMAND is not set
-CONFIG_DEFAULT_FDT_FILE="fsl-imx8mm-verdin-dev.dtb"
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="setenv fdtfile imx8mm-verdin-${variant}-${fdt_board}.dtb"
 CONFIG_LOG=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-- 
2.26.2

[PATCH v3 10/10] verdin-imx8mm: fix watchdog pinctrl issue

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Finally, found the root cause of the issue already once mentioned back
here [2] which caused the following error message during boot:

imx_wdt watchdog@30280000:
 pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19

Turns out while the watchdog node itself was already u-boot,dm-spl its
pinctrl node was not which caused it to be unavailable at that early
stage. Note that any and all other boards I checked also seem to be
missing this. However, I can't judge whether or not they might indeed
need a similar fix or not.

[2] https://marc.info/?l=u-boot&m=161786572422973

Fixes: commit d304e7ace3a6
 ("ARM: imx8m: Fix reset in SPL on Toradex iMX8MM Verdin")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

---

(no changes since v2)

Changes in v2:
- New patch fixing watchdog pinctrl issue.

 arch/arm/dts/imx8mm-verdin-u-boot.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/dts/imx8mm-verdin-u-boot.dtsi b/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
index 0e041865021..6962bb40b6e 100644
--- a/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
@@ -68,6 +68,10 @@
 	u-boot,dm-spl;
 };
 
+&pinctrl_wdog {
+	u-boot,dm-spl;
+};
+
 &{/soc@0/bus@30800000/i2c@30a20000/pmic} {
 	u-boot,dm-spl;
 };
-- 
2.26.2