* [PATCH v2 1/2] ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting
@ 2021-08-31 12:58 ` Nicolas Saenz Julienne
0 siblings, 0 replies; 8+ messages in thread
From: Nicolas Saenz Julienne @ 2021-08-31 12:58 UTC (permalink / raw)
To: robh+dt, nsaenz, f.fainelli
Cc: gregkh, devicetree, bcm-kernel-feedback-list, linux-rpi-kernel,
linux-arm-kernel, linux-kernel, stefan.wahren,
Nicolas Saenz Julienne, Rob Herring
dtbs_check currently complains that:
arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning
(pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format
error, expected "0,0"
Unsurprisingly pci@0,0 is the right address, as illustrated by its reg
property:
&pcie0 {
pci@0,0 {
/*
* As defined in the IEEE Std 1275-1994 document,
* reg is a five-cell address encoded as (phys.hi
* phys.mid phys.lo size.hi size.lo). phys.hi
* should contain the device's BDF as 0b00000000
* bbbbbbbb dddddfff 00000000. The other cells
* should be zero.
*/
reg = <0 0 0 0 0>;
};
};
The device is clearly 0. So fix it.
Also add a missing 'device_type = "pci"'.
Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node")
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
---
Changes since v1:
- s/bus/device/ when talking about unit addresses
- Add device_type
- Add Suggested-by
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index f24bdd0870a5..8377dc14b7b5 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -217,7 +217,8 @@ phy1: ethernet-phy@1 {
};
&pcie0 {
- pci@1,0 {
+ pci@0,0 {
+ device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
ranges;
--
2.31.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v2 1/2] ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting
@ 2021-08-31 12:58 ` Nicolas Saenz Julienne
0 siblings, 0 replies; 8+ messages in thread
From: Nicolas Saenz Julienne @ 2021-08-31 12:58 UTC (permalink / raw)
To: robh+dt, nsaenz, f.fainelli
Cc: gregkh, devicetree, bcm-kernel-feedback-list, linux-rpi-kernel,
linux-arm-kernel, linux-kernel, stefan.wahren,
Nicolas Saenz Julienne, Rob Herring
dtbs_check currently complains that:
arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning
(pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format
error, expected "0,0"
Unsurprisingly pci@0,0 is the right address, as illustrated by its reg
property:
&pcie0 {
pci@0,0 {
/*
* As defined in the IEEE Std 1275-1994 document,
* reg is a five-cell address encoded as (phys.hi
* phys.mid phys.lo size.hi size.lo). phys.hi
* should contain the device's BDF as 0b00000000
* bbbbbbbb dddddfff 00000000. The other cells
* should be zero.
*/
reg = <0 0 0 0 0>;
};
};
The device is clearly 0. So fix it.
Also add a missing 'device_type = "pci"'.
Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node")
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
---
Changes since v1:
- s/bus/device/ when talking about unit addresses
- Add device_type
- Add Suggested-by
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index f24bdd0870a5..8377dc14b7b5 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -217,7 +217,8 @@ phy1: ethernet-phy@1 {
};
&pcie0 {
- pci@1,0 {
+ pci@0,0 {
+ device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
ranges;
--
2.31.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v2 2/2] ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address
2021-08-31 12:58 ` Nicolas Saenz Julienne
@ 2021-08-31 12:58 ` Nicolas Saenz Julienne
-1 siblings, 0 replies; 8+ messages in thread
From: Nicolas Saenz Julienne @ 2021-08-31 12:58 UTC (permalink / raw)
To: robh+dt, nsaenz, f.fainelli
Cc: gregkh, devicetree, bcm-kernel-feedback-list, linux-rpi-kernel,
linux-arm-kernel, linux-kernel, stefan.wahren,
Nicolas Saenz Julienne, Rob Herring
The unit address is supposed to represent '<device>,<function>'. Which
are both 0 for RPi4b's XHCI controller. On top of that although
OpenFirmware states bus number goes in the high part of the last reg
parameter, FDT doesn't seem to care for it[1], so remove it.
[1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210830103909.323356-1-nsaenzju@redhat.com/#24414633
Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node")
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
---
Chages since v1:
- Add patch as per robh suggestion
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 8377dc14b7b5..50530cc91876 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -225,8 +225,8 @@ pci@0,0 {
reg = <0 0 0 0 0>;
- usb@1,0 {
- reg = <0x10000 0 0 0 0>;
+ usb@0,0 {
+ reg = <0 0 0 0 0>;
resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
};
};
--
2.31.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v2 2/2] ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address
@ 2021-08-31 12:58 ` Nicolas Saenz Julienne
0 siblings, 0 replies; 8+ messages in thread
From: Nicolas Saenz Julienne @ 2021-08-31 12:58 UTC (permalink / raw)
To: robh+dt, nsaenz, f.fainelli
Cc: gregkh, devicetree, bcm-kernel-feedback-list, linux-rpi-kernel,
linux-arm-kernel, linux-kernel, stefan.wahren,
Nicolas Saenz Julienne, Rob Herring
The unit address is supposed to represent '<device>,<function>'. Which
are both 0 for RPi4b's XHCI controller. On top of that although
OpenFirmware states bus number goes in the high part of the last reg
parameter, FDT doesn't seem to care for it[1], so remove it.
[1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210830103909.323356-1-nsaenzju@redhat.com/#24414633
Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node")
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
---
Chages since v1:
- Add patch as per robh suggestion
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 8377dc14b7b5..50530cc91876 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -225,8 +225,8 @@ pci@0,0 {
reg = <0 0 0 0 0>;
- usb@1,0 {
- reg = <0x10000 0 0 0 0>;
+ usb@0,0 {
+ reg = <0 0 0 0 0>;
resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
};
};
--
2.31.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH v2 2/2] ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address
2021-08-31 12:58 ` Nicolas Saenz Julienne
@ 2021-08-31 13:50 ` Rob Herring
-1 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2021-08-31 13:50 UTC (permalink / raw)
To: Nicolas Saenz Julienne
Cc: Nicolas Saenz Julienne, Florian Fainelli, Greg Kroah-Hartman,
devicetree, maintainer:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2835 ARM ARCHITECTURE,
linux-arm-kernel, linux-kernel, Stefan Wahren
On Tue, Aug 31, 2021 at 7:59 AM Nicolas Saenz Julienne
<nsaenzju@redhat.com> wrote:
>
> The unit address is supposed to represent '<device>,<function>'. Which
> are both 0 for RPi4b's XHCI controller. On top of that although
> OpenFirmware states bus number goes in the high part of the last reg
> parameter, FDT doesn't seem to care for it[1], so remove it.
>
> [1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210830103909.323356-1-nsaenzju@redhat.com/#24414633
> Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node")
> Suggested-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
> ---
>
> Chages since v1:
> - Add patch as per robh suggestion
>
> arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH v2 2/2] ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address
@ 2021-08-31 13:50 ` Rob Herring
0 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2021-08-31 13:50 UTC (permalink / raw)
To: Nicolas Saenz Julienne
Cc: Nicolas Saenz Julienne, Florian Fainelli, Greg Kroah-Hartman,
devicetree, maintainer:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2835 ARM ARCHITECTURE,
linux-arm-kernel, linux-kernel, Stefan Wahren
On Tue, Aug 31, 2021 at 7:59 AM Nicolas Saenz Julienne
<nsaenzju@redhat.com> wrote:
>
> The unit address is supposed to represent '<device>,<function>'. Which
> are both 0 for RPi4b's XHCI controller. On top of that although
> OpenFirmware states bus number goes in the high part of the last reg
> parameter, FDT doesn't seem to care for it[1], so remove it.
>
> [1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210830103909.323356-1-nsaenzju@redhat.com/#24414633
> Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node")
> Suggested-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
> ---
>
> Chages since v1:
> - Add patch as per robh suggestion
>
> arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 1/2] ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting
2021-08-31 12:58 ` Nicolas Saenz Julienne
@ 2021-08-31 13:50 ` Rob Herring
-1 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2021-08-31 13:50 UTC (permalink / raw)
To: Nicolas Saenz Julienne
Cc: Nicolas Saenz Julienne, Florian Fainelli, Greg Kroah-Hartman,
devicetree, maintainer:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2835 ARM ARCHITECTURE,
linux-arm-kernel, linux-kernel, Stefan Wahren
On Tue, Aug 31, 2021 at 7:59 AM Nicolas Saenz Julienne
<nsaenzju@redhat.com> wrote:
>
> dtbs_check currently complains that:
>
> arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning
> (pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format
> error, expected "0,0"
>
> Unsurprisingly pci@0,0 is the right address, as illustrated by its reg
> property:
>
> &pcie0 {
> pci@0,0 {
> /*
> * As defined in the IEEE Std 1275-1994 document,
> * reg is a five-cell address encoded as (phys.hi
> * phys.mid phys.lo size.hi size.lo). phys.hi
> * should contain the device's BDF as 0b00000000
> * bbbbbbbb dddddfff 00000000. The other cells
> * should be zero.
> */
> reg = <0 0 0 0 0>;
> };
> };
>
> The device is clearly 0. So fix it.
>
> Also add a missing 'device_type = "pci"'.
>
> Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node")
> Suggested-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
> ---
>
> Changes since v1:
> - s/bus/device/ when talking about unit addresses
> - Add device_type
> - Add Suggested-by
>
> arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH v2 1/2] ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting
@ 2021-08-31 13:50 ` Rob Herring
0 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2021-08-31 13:50 UTC (permalink / raw)
To: Nicolas Saenz Julienne
Cc: Nicolas Saenz Julienne, Florian Fainelli, Greg Kroah-Hartman,
devicetree, maintainer:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2835 ARM ARCHITECTURE,
linux-arm-kernel, linux-kernel, Stefan Wahren
On Tue, Aug 31, 2021 at 7:59 AM Nicolas Saenz Julienne
<nsaenzju@redhat.com> wrote:
>
> dtbs_check currently complains that:
>
> arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning
> (pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format
> error, expected "0,0"
>
> Unsurprisingly pci@0,0 is the right address, as illustrated by its reg
> property:
>
> &pcie0 {
> pci@0,0 {
> /*
> * As defined in the IEEE Std 1275-1994 document,
> * reg is a five-cell address encoded as (phys.hi
> * phys.mid phys.lo size.hi size.lo). phys.hi
> * should contain the device's BDF as 0b00000000
> * bbbbbbbb dddddfff 00000000. The other cells
> * should be zero.
> */
> reg = <0 0 0 0 0>;
> };
> };
>
> The device is clearly 0. So fix it.
>
> Also add a missing 'device_type = "pci"'.
>
> Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node")
> Suggested-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
> ---
>
> Changes since v1:
> - s/bus/device/ when talking about unit addresses
> - Add device_type
> - Add Suggested-by
>
> arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2021-08-31 13:53 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-31 12:58 [PATCH v2 1/2] ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting Nicolas Saenz Julienne
2021-08-31 12:58 ` Nicolas Saenz Julienne
2021-08-31 12:58 ` [PATCH v2 2/2] ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address Nicolas Saenz Julienne
2021-08-31 12:58 ` Nicolas Saenz Julienne
2021-08-31 13:50 ` Rob Herring
2021-08-31 13:50 ` Rob Herring
2021-08-31 13:50 ` [PATCH v2 1/2] ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting Rob Herring
2021-08-31 13:50 ` Rob Herring
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.