* [PATCH 4.14 001/217] ext4: fix race writing to an inline_data file while its xattrs are changing
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 002/217] xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG Greg Kroah-Hartman
` (218 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, stable, syzbot+13146364637c7363a7de,
Theodore Tso
From: Theodore Ts'o <tytso@mit.edu>
commit a54c4613dac1500b40e4ab55199f7c51f028e848 upstream.
The location of the system.data extended attribute can change whenever
xattr_sem is not taken. So we need to recalculate the i_inline_off
field since it mgiht have changed between ext4_write_begin() and
ext4_write_end().
This means that caching i_inline_off is probably not helpful, so in
the long run we should probably get rid of it and shrink the in-memory
ext4 inode slightly, but let's fix the race the simple way for now.
Cc: stable@kernel.org
Fixes: f19d5870cbf72 ("ext4: add normal write support for inline data")
Reported-by: syzbot+13146364637c7363a7de@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ext4/inline.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -756,6 +756,12 @@ int ext4_write_inline_data_end(struct in
ext4_write_lock_xattr(inode, &no_expand);
BUG_ON(!ext4_has_inline_data(inode));
+ /*
+ * ei->i_inline_off may have changed since ext4_write_begin()
+ * called ext4_try_to_write_inline_data()
+ */
+ (void) ext4_find_inline_data_nolock(inode);
+
kaddr = kmap_atomic(page);
ext4_write_inline_data(inode, &iloc, kaddr, pos, len);
kunmap_atomic(kaddr);
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 002/217] xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 001/217] ext4: fix race writing to an inline_data file while its xattrs are changing Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 003/217] qed: Fix the VF msix vectors flow Greg Kroah-Hartman
` (217 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Randy Dunlap, Max Filippov,
Chris Zankel, linux-xtensa
From: Randy Dunlap <rdunlap@infradead.org>
commit ed5aacc81cd41efc4d561e14af408d1003f7b855 upstream.
XTENSA should only select HAVE_FUTEX_CMPXCHG when FUTEX is
set/enabled. This prevents a kconfig warning.
WARNING: unmet direct dependencies detected for HAVE_FUTEX_CMPXCHG
Depends on [n]: FUTEX [=n]
Selected by [y]:
- XTENSA [=y] && !MMU [=n]
Fixes: d951ba21b959 ("xtensa: nommu: select HAVE_FUTEX_CMPXCHG")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: linux-xtensa@linux-xtensa.org
Message-Id: <20210526070337.28130-1-rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/xtensa/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -20,7 +20,7 @@ config XTENSA
select HAVE_DMA_CONTIGUOUS
select HAVE_EXIT_THREAD
select HAVE_FUNCTION_TRACER
- select HAVE_FUTEX_CMPXCHG if !MMU
+ select HAVE_FUTEX_CMPXCHG if !MMU && FUTEX
select HAVE_HW_BREAKPOINT if PERF_EVENTS
select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_MEMBLOCK
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 003/217] qed: Fix the VF msix vectors flow
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 001/217] ext4: fix race writing to an inline_data file while its xattrs are changing Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 002/217] xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 004/217] net: macb: Add a NULL check on desc_ptp Greg Kroah-Hartman
` (216 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Prabhakar Kushwaha, Ariel Elior,
Shai Malin, David S. Miller, Sasha Levin
From: Shai Malin <smalin@marvell.com>
[ Upstream commit b0cd08537db8d2fbb227cdb2e5835209db295a24 ]
For VFs we should return with an error in case we didn't get the exact
number of msix vectors as we requested.
Not doing that will lead to a crash when starting queues for this VF.
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/qlogic/qed/qed_main.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index 52e747fd9c83..62d514b60e23 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -437,7 +437,12 @@ static int qed_enable_msix(struct qed_dev *cdev,
rc = cnt;
}
- if (rc > 0) {
+ /* For VFs, we should return with an error in case we didn't get the
+ * exact number of msix vectors as we requested.
+ * Not doing that will lead to a crash when starting queues for
+ * this VF.
+ */
+ if ((IS_PF(cdev) && rc > 0) || (IS_VF(cdev) && rc == cnt)) {
/* MSI-x configuration was achieved */
int_params->out.int_mode = QED_INT_MODE_MSIX;
int_params->out.num_vectors = rc;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 004/217] net: macb: Add a NULL check on desc_ptp
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (2 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 003/217] qed: Fix the VF msix vectors flow Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 005/217] qede: Fix memset corruption Greg Kroah-Hartman
` (215 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Harini Katakam, Radhey Shyam Pandey,
Michal Simek, David S. Miller, Sasha Levin
From: Harini Katakam <harini.katakam@xilinx.com>
[ Upstream commit 85520079afce885b80647fbd0d13d8f03d057167 ]
macb_ptp_desc will not return NULL under most circumstances with correct
Kconfig and IP design config register. But for the sake of the extreme
corner case, check for NULL when using the helper. In case of rx_tstamp,
no action is necessary except to return (similar to timestamp disabled)
and warn. In case of TX, return -EINVAL to let the skb be free. Perform
this check before marking skb in progress.
Fixes coverity warning:
(4) Event dereference:
Dereferencing a null pointer "desc_ptp"
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/cadence/macb_ptp.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cadence/macb_ptp.c b/drivers/net/ethernet/cadence/macb_ptp.c
index f1f07e9d53f8..07d6472dd149 100755
--- a/drivers/net/ethernet/cadence/macb_ptp.c
+++ b/drivers/net/ethernet/cadence/macb_ptp.c
@@ -286,6 +286,12 @@ void gem_ptp_rxstamp(struct macb *bp, struct sk_buff *skb,
if (GEM_BFEXT(DMA_RXVALID, desc->addr)) {
desc_ptp = macb_ptp_desc(bp, desc);
+ /* Unlikely but check */
+ if (!desc_ptp) {
+ dev_warn_ratelimited(&bp->pdev->dev,
+ "Timestamp not supported in BD\n");
+ return;
+ }
gem_hw_timestamp(bp, desc_ptp->ts_1, desc_ptp->ts_2, &ts);
memset(shhwtstamps, 0, sizeof(struct skb_shared_hwtstamps));
shhwtstamps->hwtstamp = ktime_set(ts.tv_sec, ts.tv_nsec);
@@ -318,8 +324,11 @@ int gem_ptp_txstamp(struct macb_queue *queue, struct sk_buff *skb,
if (CIRC_SPACE(head, tail, PTP_TS_BUFFER_SIZE) == 0)
return -ENOMEM;
- skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
desc_ptp = macb_ptp_desc(queue->bp, desc);
+ /* Unlikely but check */
+ if (!desc_ptp)
+ return -EINVAL;
+ skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
tx_timestamp = &queue->tx_timestamps[head];
tx_timestamp->skb = skb;
tx_timestamp->desc_ptp.ts_1 = desc_ptp->ts_1;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 005/217] qede: Fix memset corruption
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (3 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 004/217] net: macb: Add a NULL check on desc_ptp Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 006/217] perf/x86/intel/pt: Fix mask of num_address_ranges Greg Kroah-Hartman
` (214 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Prabhakar Kushwaha, Ariel Elior,
Shai Malin, Kees Cook, David S. Miller, Sasha Levin
From: Shai Malin <smalin@marvell.com>
[ Upstream commit e543468869e2532f5d7926e8f417782b48eca3dc ]
Thanks to Kees Cook who detected the problem of memset that starting
from not the first member, but sized for the whole struct.
The better change will be to remove the redundant memset and to clear
only the msix_cnt member.
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Reported-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/qlogic/qede/qede_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index 8bb734486bf3..99de923728ec 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -1590,6 +1590,7 @@ static void qede_sync_free_irqs(struct qede_dev *edev)
}
edev->int_info.used_cnt = 0;
+ edev->int_info.msix_cnt = 0;
}
static int qede_req_msix_irqs(struct qede_dev *edev)
@@ -2088,7 +2089,6 @@ static int qede_load(struct qede_dev *edev, enum qede_load_mode mode,
goto out;
err4:
qede_sync_free_irqs(edev);
- memset(&edev->int_info.msix_cnt, 0, sizeof(struct qed_int_info));
err3:
qede_napi_disable_remove(edev);
err2:
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 006/217] perf/x86/intel/pt: Fix mask of num_address_ranges
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (4 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 005/217] qede: Fix memset corruption Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 007/217] perf/x86/amd/ibs: Work around erratum #1197 Greg Kroah-Hartman
` (213 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Xiaoyao Li, Peter Zijlstra (Intel),
Alexander Shishkin, Sasha Levin
From: Xiaoyao Li <xiaoyao.li@intel.com>
[ Upstream commit c53c6b7409f4cd9e542991b53d597fbe2751d7db ]
Per SDM, bit 2:0 of CPUID(0x14,1).EAX[2:0] reports the number of
configurable address ranges for filtering, not bit 1:0.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lkml.kernel.org/r/20210824040622.4081502-1-xiaoyao.li@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/events/intel/pt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/events/intel/pt.c b/arch/x86/events/intel/pt.c
index 0661227d935c..990ca9614b23 100644
--- a/arch/x86/events/intel/pt.c
+++ b/arch/x86/events/intel/pt.c
@@ -69,7 +69,7 @@ static struct pt_cap_desc {
PT_CAP(topa_multiple_entries, 0, CPUID_ECX, BIT(1)),
PT_CAP(single_range_output, 0, CPUID_ECX, BIT(2)),
PT_CAP(payloads_lip, 0, CPUID_ECX, BIT(31)),
- PT_CAP(num_address_ranges, 1, CPUID_EAX, 0x3),
+ PT_CAP(num_address_ranges, 1, CPUID_EAX, 0x7),
PT_CAP(mtc_periods, 1, CPUID_EAX, 0xffff0000),
PT_CAP(cycle_thresholds, 1, CPUID_EBX, 0xffff),
PT_CAP(psb_periods, 1, CPUID_EBX, 0xffff0000),
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 007/217] perf/x86/amd/ibs: Work around erratum #1197
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (5 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 006/217] perf/x86/intel/pt: Fix mask of num_address_ranges Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 008/217] cryptoloop: add a deprecation warning Greg Kroah-Hartman
` (212 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kim Phillips, Peter Zijlstra (Intel),
Ingo Molnar, Sasha Levin
From: Kim Phillips <kim.phillips@amd.com>
[ Upstream commit 26db2e0c51fe83e1dd852c1321407835b481806e ]
Erratum #1197 "IBS (Instruction Based Sampling) Register State May be
Incorrect After Restore From CC6" is published in a document:
"Revision Guide for AMD Family 19h Models 00h-0Fh Processors" 56683 Rev. 1.04 July 2021
https://bugzilla.kernel.org/show_bug.cgi?id=206537
Implement the erratum's suggested workaround and ignore IBS samples if
MSRC001_1031 == 0.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210817221048.88063-3-kim.phillips@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/events/amd/ibs.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c
index 3fe68f7f9d5e..5043425ced6b 100644
--- a/arch/x86/events/amd/ibs.c
+++ b/arch/x86/events/amd/ibs.c
@@ -90,6 +90,7 @@ struct perf_ibs {
unsigned long offset_mask[1];
int offset_max;
unsigned int fetch_count_reset_broken : 1;
+ unsigned int fetch_ignore_if_zero_rip : 1;
struct cpu_perf_ibs __percpu *pcpu;
struct attribute **format_attrs;
@@ -674,6 +675,10 @@ fail:
if (check_rip && (ibs_data.regs[2] & IBS_RIP_INVALID)) {
regs.flags &= ~PERF_EFLAGS_EXACT;
} else {
+ /* Workaround for erratum #1197 */
+ if (perf_ibs->fetch_ignore_if_zero_rip && !(ibs_data.regs[1]))
+ goto out;
+
set_linear_ip(®s, ibs_data.regs[1]);
regs.flags |= PERF_EFLAGS_EXACT;
}
@@ -767,6 +772,9 @@ static __init void perf_event_ibs_init(void)
if (boot_cpu_data.x86 >= 0x16 && boot_cpu_data.x86 <= 0x18)
perf_ibs_fetch.fetch_count_reset_broken = 1;
+ if (boot_cpu_data.x86 == 0x19 && boot_cpu_data.x86_model < 0x10)
+ perf_ibs_fetch.fetch_ignore_if_zero_rip = 1;
+
perf_ibs_pmu_init(&perf_ibs_fetch, "ibs_fetch");
if (ibs_caps & IBS_CAPS_OPCNT) {
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 008/217] cryptoloop: add a deprecation warning
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (6 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 007/217] perf/x86/amd/ibs: Work around erratum #1197 Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 009/217] ARM: 8918/2: only build return_address() if needed Greg Kroah-Hartman
` (211 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christoph Hellwig, Jens Axboe, Sasha Levin
From: Christoph Hellwig <hch@lst.de>
[ Upstream commit 222013f9ac30b9cec44301daa8dbd0aae38abffb ]
Support for cryptoloop has been officially marked broken and deprecated
in favor of dm-crypt (which supports the same broken algorithms if
needed) in Linux 2.6.4 (released in March 2004), and support for it has
been entirely removed from losetup in util-linux 2.23 (released in April
2013). Add a warning and a deprecation schedule.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210827163250.255325-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/block/Kconfig | 4 ++--
drivers/block/cryptoloop.c | 2 ++
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 01091c08e999..ef702fdb2f92 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -234,7 +234,7 @@ config BLK_DEV_LOOP_MIN_COUNT
dynamically allocated with the /dev/loop-control interface.
config BLK_DEV_CRYPTOLOOP
- tristate "Cryptoloop Support"
+ tristate "Cryptoloop Support (DEPRECATED)"
select CRYPTO
select CRYPTO_CBC
depends on BLK_DEV_LOOP
@@ -246,7 +246,7 @@ config BLK_DEV_CRYPTOLOOP
WARNING: This device is not safe for journaled file systems like
ext3 or Reiserfs. Please use the Device Mapper crypto module
instead, which can be configured to be on-disk compatible with the
- cryptoloop device.
+ cryptoloop device. cryptoloop support will be removed in Linux 5.16.
source "drivers/block/drbd/Kconfig"
diff --git a/drivers/block/cryptoloop.c b/drivers/block/cryptoloop.c
index 74e03aa537ad..32363816cb04 100644
--- a/drivers/block/cryptoloop.c
+++ b/drivers/block/cryptoloop.c
@@ -203,6 +203,8 @@ init_cryptoloop(void)
if (rc)
printk(KERN_ERR "cryptoloop: loop_register_transfer failed\n");
+ else
+ pr_warn("the cryptoloop driver has been deprecated and will be removed in in Linux 5.16\n");
return rc;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 009/217] ARM: 8918/2: only build return_address() if needed
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (7 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 008/217] cryptoloop: add a deprecation warning Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 010/217] ALSA: pcm: fix divide error in snd_pcm_lib_ioctl Greg Kroah-Hartman
` (210 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Ben Dooks, Russell King
From: Ben Dooks <ben-linux@fluff.org>
commit fb033c95c94ca1ee3d16e04ebdb85d65fb55fff8 upstream.
The system currently warns if the config conditions for
building return_address in arch/arm/kernel/return_address.c
are not met, leaving just an EXPORT_SYMBOL_GPL(return_address)
of a function defined to be 'static linline'.
This is a result of aeea3592a13b ("ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h").
Since we're not going to build anything other than an exported
symbol for something that is already being defined to be an
inline-able return of NULL, just avoid building the code to
remove the following warning:
Fixes: aeea3592a13b ("ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/kernel/Makefile | 6 +++++-
arch/arm/kernel/return_address.c | 4 ----
2 files changed, 5 insertions(+), 5 deletions(-)
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -17,10 +17,14 @@ CFLAGS_REMOVE_return_address.o = -pg
# Object file lists.
obj-y := elf.o entry-common.o irq.o opcodes.o \
- process.o ptrace.o reboot.o return_address.o \
+ process.o ptrace.o reboot.o \
setup.o signal.o sigreturn_codes.o \
stacktrace.o sys_arm.o time.o traps.o
+ifneq ($(CONFIG_ARM_UNWIND),y)
+obj-$(CONFIG_FRAME_POINTER) += return_address.o
+endif
+
obj-$(CONFIG_ATAGS) += atags_parse.o
obj-$(CONFIG_ATAGS_PROC) += atags_proc.o
obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += atags_compat.o
--- a/arch/arm/kernel/return_address.c
+++ b/arch/arm/kernel/return_address.c
@@ -10,8 +10,6 @@
*/
#include <linux/export.h>
#include <linux/ftrace.h>
-
-#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
#include <linux/sched.h>
#include <asm/stacktrace.h>
@@ -56,6 +54,4 @@ void *return_address(unsigned int level)
return NULL;
}
-#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */
-
EXPORT_SYMBOL_GPL(return_address);
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 010/217] ALSA: pcm: fix divide error in snd_pcm_lib_ioctl
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (8 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 009/217] ARM: 8918/2: only build return_address() if needed Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 011/217] clk: fix build warning for orphan_list Greg Kroah-Hartman
` (209 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zubin Mithra, Guenter Roeck, Takashi Iwai
From: Zubin Mithra <zsm@chromium.org>
commit f3eef46f0518a2b32ca1244015820c35a22cfe4a upstream.
Syzkaller reported a divide error in snd_pcm_lib_ioctl. fifo_size
is of type snd_pcm_uframes_t(unsigned long). If frame_size
is 0x100000000, the error occurs.
Fixes: a9960e6a293e ("ALSA: pcm: fix fifo_size frame calculation")
Signed-off-by: Zubin Mithra <zsm@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210827153735.789452-1-zsm@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/core/pcm_lib.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -1757,7 +1757,7 @@ static int snd_pcm_lib_ioctl_fifo_size(s
channels = params_channels(params);
frame_size = snd_pcm_format_size(format, channels);
if (frame_size > 0)
- params->fifo_size /= (unsigned)frame_size;
+ params->fifo_size /= frame_size;
}
return 0;
}
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 011/217] clk: fix build warning for orphan_list
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (9 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 010/217] ALSA: pcm: fix divide error in snd_pcm_lib_ioctl Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 012/217] media: stkwebcam: fix memory leak in stk_camera_probe Greg Kroah-Hartman
` (208 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, kernelci.org bot
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the backport of commit bdcf1dc25324 ("clk: Evict unregistered clks
from parent caches") to the 4.19.y and 4.14.y stable trees, the
orphan_list structure was placed in the wrong location, causing loads of
build warnings on systems that do not define CONFIG_DEBUG_FS.
Fix this up by moving the structure to the correct place in the file.
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/clk/clk.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -45,11 +45,6 @@ static struct hlist_head *all_lists[] =
NULL,
};
-static struct hlist_head *orphan_list[] = {
- &clk_orphan_list,
- NULL,
-};
-
/*** private data structures ***/
struct clk_core {
@@ -2004,6 +1999,11 @@ static int inited = 0;
static DEFINE_MUTEX(clk_debug_lock);
static HLIST_HEAD(clk_debug_list);
+static struct hlist_head *orphan_list[] = {
+ &clk_orphan_list,
+ NULL,
+};
+
static void clk_summary_show_one(struct seq_file *s, struct clk_core *c,
int level)
{
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 012/217] media: stkwebcam: fix memory leak in stk_camera_probe
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (10 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 011/217] clk: fix build warning for orphan_list Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 013/217] igmp: Add ip_mc_list lock in ip_check_mc_rcu Greg Kroah-Hartman
` (207 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pavel Skripkin, Hans Verkuil,
Mauro Carvalho Chehab
From: Pavel Skripkin <paskripkin@gmail.com>
commit 514e97674400462cc09c459a1ddfb9bf39017223 upstream.
My local syzbot instance hit memory leak in usb_set_configuration().
The problem was in unputted usb interface. In case of errors after
usb_get_intf() the reference should be putted to correclty free memory
allocated for this interface.
Fixes: ec16dae5453e ("V4L/DVB (7019): V4L: add support for Syntek DC1125 webcams")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/media/usb/stkwebcam/stk-webcam.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/media/usb/stkwebcam/stk-webcam.c
+++ b/drivers/media/usb/stkwebcam/stk-webcam.c
@@ -1355,7 +1355,7 @@ static int stk_camera_probe(struct usb_i
if (!dev->isoc_ep) {
pr_err("Could not find isoc-in endpoint\n");
err = -ENODEV;
- goto error;
+ goto error_put;
}
dev->vsettings.palette = V4L2_PIX_FMT_RGB565;
dev->vsettings.mode = MODE_VGA;
@@ -1368,10 +1368,12 @@ static int stk_camera_probe(struct usb_i
err = stk_register_video_device(dev);
if (err)
- goto error;
+ goto error_put;
return 0;
+error_put:
+ usb_put_intf(interface);
error:
v4l2_ctrl_handler_free(hdl);
v4l2_device_unregister(&dev->v4l2_dev);
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 013/217] igmp: Add ip_mc_list lock in ip_check_mc_rcu
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (11 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 012/217] media: stkwebcam: fix memory leak in stk_camera_probe Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 014/217] USB: serial: mos7720: improve OOM-handling in read_mos_reg() Greg Kroah-Hartman
` (206 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Liu Jian, David S. Miller, Lee Jones
From: Liu Jian <liujian56@huawei.com>
commit 23d2b94043ca8835bd1e67749020e839f396a1c2 upstream.
I got below panic when doing fuzz test:
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 4056 Comm: syz-executor.3 Tainted: G B 5.14.0-rc1-00195-gcff5c4254439-dirty #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack_lvl+0x7a/0x9b
panic+0x2cd/0x5af
end_report.cold+0x5a/0x5a
kasan_report+0xec/0x110
ip_check_mc_rcu+0x556/0x5d0
__mkroute_output+0x895/0x1740
ip_route_output_key_hash_rcu+0x2d0/0x1050
ip_route_output_key_hash+0x182/0x2e0
ip_route_output_flow+0x28/0x130
udp_sendmsg+0x165d/0x2280
udpv6_sendmsg+0x121e/0x24f0
inet6_sendmsg+0xf7/0x140
sock_sendmsg+0xe9/0x180
____sys_sendmsg+0x2b8/0x7a0
___sys_sendmsg+0xf0/0x160
__sys_sendmmsg+0x17e/0x3c0
__x64_sys_sendmmsg+0x9e/0x100
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x462eb9
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8
48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48>
3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3df5af1c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462eb9
RDX: 0000000000000312 RSI: 0000000020001700 RDI: 0000000000000007
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f3df5af26bc
R13: 00000000004c372d R14: 0000000000700b10 R15: 00000000ffffffff
It is one use-after-free in ip_check_mc_rcu.
In ip_mc_del_src, the ip_sf_list of pmc has been freed under pmc->lock protection.
But access to ip_sf_list in ip_check_mc_rcu is not protected by the lock.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/igmp.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -2695,6 +2695,7 @@ int ip_check_mc_rcu(struct in_device *in
rv = 1;
} else if (im) {
if (src_addr) {
+ spin_lock_bh(&im->lock);
for (psf = im->sources; psf; psf = psf->sf_next) {
if (psf->sf_inaddr == src_addr)
break;
@@ -2705,6 +2706,7 @@ int ip_check_mc_rcu(struct in_device *in
im->sfcount[MCAST_EXCLUDE];
else
rv = im->sfcount[MCAST_EXCLUDE] != 0;
+ spin_unlock_bh(&im->lock);
} else
rv = 1; /* unspecified source; tentatively allow */
}
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 014/217] USB: serial: mos7720: improve OOM-handling in read_mos_reg()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (12 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 013/217] igmp: Add ip_mc_list lock in ip_check_mc_rcu Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 015/217] f2fs: fix potential overflow Greg Kroah-Hartman
` (205 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Tom Rix, Johan Hovold
From: Tom Rix <trix@redhat.com>
commit 161a582bd1d8681095f158d11bc679a58f1d026b upstream.
clang static analysis reports this problem
mos7720.c:352:2: warning: Undefined or garbage value returned to caller
return d;
^~~~~~~~
In the parport_mos7715_read_data()'s call to read_mos_reg(), 'd' is
only set after the alloc block.
buf = kmalloc(1, GFP_KERNEL);
if (!buf)
return -ENOMEM;
Although the problem is reported in parport_most7715_read_data(),
none of the callee's of read_mos_reg() check the return status.
Make sure to clear the return-value buffer also on allocation failures.
Fixes: 0d130367abf5 ("USB: serial: mos7720: fix control-message error handling")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20210111220904.1035957-1-trix@redhat.com
[ johan: only clear the buffer on errors, amend commit message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/mos7720.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -229,8 +229,10 @@ static int read_mos_reg(struct usb_seria
int status;
buf = kmalloc(1, GFP_KERNEL);
- if (!buf)
+ if (!buf) {
+ *data = 0;
return -ENOMEM;
+ }
status = usb_control_msg(usbdev, pipe, request, requesttype, value,
index, buf, 1, MOS_WDR_TIMEOUT);
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 015/217] f2fs: fix potential overflow
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (13 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 014/217] USB: serial: mos7720: improve OOM-handling in read_mos_reg() Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 016/217] ath10k: fix recent bandwidth conversion bug Greg Kroah-Hartman
` (204 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Chao Yu, Jaegeuk Kim
From: Chao Yu <yuchao0@huawei.com>
commit a9af3fdcc4258af406879eca63d82e9d6baa892e upstream.
In build_sit_entries(), if valid_blocks in SIT block is smaller than
valid_blocks in journal, for below calculation:
sbi->discard_blks += old_valid_blocks - se->valid_blocks;
There will be two times potential overflow:
- old_valid_blocks - se->valid_blocks will overflow, and be a very
large number.
- sbi->discard_blks += result will overflow again, comes out a correct
result accidently.
Anyway, it should be fixed.
Fixes: d600af236da5 ("f2fs: avoid unneeded loop in build_sit_entries")
Fixes: 1f43e2ad7bff ("f2fs: introduce CP_TRIMMED_FLAG to avoid unneeded discard")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/f2fs/segment.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -3337,14 +3337,17 @@ static int build_sit_entries(struct f2fs
} else {
memcpy(se->discard_map, se->cur_valid_map,
SIT_VBLOCK_MAP_SIZE);
- sbi->discard_blks += old_valid_blocks -
- se->valid_blocks;
+ sbi->discard_blks += old_valid_blocks;
+ sbi->discard_blks -= se->valid_blocks;
}
}
- if (sbi->segs_per_sec > 1)
+ if (sbi->segs_per_sec > 1) {
get_sec_entry(sbi, start)->valid_blocks +=
- se->valid_blocks - old_valid_blocks;
+ se->valid_blocks;
+ get_sec_entry(sbi, start)->valid_blocks -=
+ old_valid_blocks;
+ }
}
up_read(&curseg->journal_rwsem);
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 016/217] ath10k: fix recent bandwidth conversion bug
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (14 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 015/217] f2fs: fix potential overflow Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 017/217] ipv4/icmp: l3mdev: Perform icmp error route lookup on source device routing table (v2) Greg Kroah-Hartman
` (203 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christian Lamparter, Anilkumar Kolli,
Kalle Valo
From: Christian Lamparter <chunkeey@gmail.com>
commit 91493e8e10f0f495b04a5c32096d56ea1f254c93 upstream.
The commit "cfg80211: make RATE_INFO_BW_20 the default" changed
the index of RATE_INFO_BW_20, but the updates to ath10k missed
the special bandwidth calculation case in
ath10k_update_per_peer_tx_stats().
This will fix below warning,
WARNING: CPU: 0 PID: 609 at net/wireless/util.c:1254
cfg80211_calculate_bitrate+0x174/0x220
invalid rate bw=1, mcs=9, nss=2
(unwind_backtrace) from
(cfg80211_calculate_bitrate+0x174/0x220)
(cfg80211_calculate_bitrate) from
(nl80211_put_sta_rate+0x44/0x1dc)from
(nl80211_put_sta_rate) from
(nl80211_send_station+0x388/0xaf0)
(nl80211_get_station+0xa8/0xec)
[ end trace da8257d6a850e91a ]
Fixes: 842be75c77cb ("cfg80211: make RATE_INFO_BW_20 the default")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/ath/ath10k/htt_rx.c | 42 +++++++++++++++++--------------
1 file changed, 24 insertions(+), 18 deletions(-)
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -613,6 +613,28 @@ struct amsdu_subframe_hdr {
#define GROUP_ID_IS_SU_MIMO(x) ((x) == 0 || (x) == 63)
+static inline u8 ath10k_bw_to_mac80211_bw(u8 bw)
+{
+ u8 ret = 0;
+
+ switch (bw) {
+ case 0:
+ ret = RATE_INFO_BW_20;
+ break;
+ case 1:
+ ret = RATE_INFO_BW_40;
+ break;
+ case 2:
+ ret = RATE_INFO_BW_80;
+ break;
+ case 3:
+ ret = RATE_INFO_BW_160;
+ break;
+ }
+
+ return ret;
+}
+
static void ath10k_htt_rx_h_rates(struct ath10k *ar,
struct ieee80211_rx_status *status,
struct htt_rx_desc *rxd)
@@ -721,23 +743,7 @@ static void ath10k_htt_rx_h_rates(struct
if (sgi)
status->enc_flags |= RX_ENC_FLAG_SHORT_GI;
- switch (bw) {
- /* 20MHZ */
- case 0:
- break;
- /* 40MHZ */
- case 1:
- status->bw = RATE_INFO_BW_40;
- break;
- /* 80MHZ */
- case 2:
- status->bw = RATE_INFO_BW_80;
- break;
- case 3:
- status->bw = RATE_INFO_BW_160;
- break;
- }
-
+ status->bw = ath10k_bw_to_mac80211_bw(bw);
status->encoding = RX_ENC_VHT;
break;
default:
@@ -2436,7 +2442,7 @@ ath10k_update_per_peer_tx_stats(struct a
arsta->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
arsta->txrate.nss = txrate.nss;
- arsta->txrate.bw = txrate.bw + RATE_INFO_BW_20;
+ arsta->txrate.bw = ath10k_bw_to_mac80211_bw(txrate.bw);
}
static void ath10k_htt_fetch_peer_stats(struct ath10k *ar,
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 017/217] ipv4/icmp: l3mdev: Perform icmp error route lookup on source device routing table (v2)
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (15 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 016/217] ath10k: fix recent bandwidth conversion bug Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 018/217] s390/disassembler: correct disassembly lines alignment Greg Kroah-Hartman
` (202 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mathieu Desnoyers, David Ahern,
Jakub Kicinski
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit e1e84eb58eb494b77c8389fc6308b5042dcce791 upstream.
As per RFC792, ICMP errors should be sent to the source host.
However, in configurations with Virtual Routing and Forwarding tables,
looking up which routing table to use is currently done by using the
destination net_device.
commit 9d1a6c4ea43e ("net: icmp_route_lookup should use rt dev to
determine L3 domain") changes the interface passed to
l3mdev_master_ifindex() and inet_addr_type_dev_table() from skb_in->dev
to skb_dst(skb_in)->dev. This effectively uses the destination device
rather than the source device for choosing which routing table should be
used to lookup where to send the ICMP error.
Therefore, if the source and destination interfaces are within separate
VRFs, or one in the global routing table and the other in a VRF, looking
up the source host in the destination interface's routing table will
fail if the destination interface's routing table contains no route to
the source host.
One observable effect of this issue is that traceroute does not work in
the following cases:
- Route leaking between global routing table and VRF
- Route leaking between VRFs
Preferably use the source device routing table when sending ICMP error
messages. If no source device is set, fall-back on the destination
device routing table. Else, use the main routing table (index 0).
[ It has been pointed out that a similar issue may exist with ICMP
errors triggered when forwarding between network namespaces. It would
be worthwhile to investigate, but is outside of the scope of this
investigation. ]
[ It has also been pointed out that a similar issue exists with
unreachable / fragmentation needed messages, which can be triggered by
changing the MTU of eth1 in r1 to 1400 and running:
ip netns exec h1 ping -s 1450 -Mdo -c1 172.16.2.2
Some investigation points to raw_icmp_error() and raw_err() as being
involved in this last scenario. The focus of this patch is TTL expired
ICMP messages, which go through icmp_route_lookup.
Investigation of failure modes related to raw_icmp_error() is beyond
this investigation's scope. ]
Fixes: 9d1a6c4ea43e ("net: icmp_route_lookup should use rt dev to determine L3 domain")
Link: https://tools.ietf.org/html/rfc792
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/icmp.c | 23 +++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -468,6 +468,23 @@ out_bh_enable:
local_bh_enable();
}
+/*
+ * The device used for looking up which routing table to use for sending an ICMP
+ * error is preferably the source whenever it is set, which should ensure the
+ * icmp error can be sent to the source host, else lookup using the routing
+ * table of the destination device, else use the main routing table (index 0).
+ */
+static struct net_device *icmp_get_route_lookup_dev(struct sk_buff *skb)
+{
+ struct net_device *route_lookup_dev = NULL;
+
+ if (skb->dev)
+ route_lookup_dev = skb->dev;
+ else if (skb_dst(skb))
+ route_lookup_dev = skb_dst(skb)->dev;
+ return route_lookup_dev;
+}
+
static struct rtable *icmp_route_lookup(struct net *net,
struct flowi4 *fl4,
struct sk_buff *skb_in,
@@ -476,6 +493,7 @@ static struct rtable *icmp_route_lookup(
int type, int code,
struct icmp_bxm *param)
{
+ struct net_device *route_lookup_dev;
struct rtable *rt, *rt2;
struct flowi4 fl4_dec;
int err;
@@ -490,7 +508,8 @@ static struct rtable *icmp_route_lookup(
fl4->flowi4_proto = IPPROTO_ICMP;
fl4->fl4_icmp_type = type;
fl4->fl4_icmp_code = code;
- fl4->flowi4_oif = l3mdev_master_ifindex(skb_dst(skb_in)->dev);
+ route_lookup_dev = icmp_get_route_lookup_dev(skb_in);
+ fl4->flowi4_oif = l3mdev_master_ifindex(route_lookup_dev);
security_skb_classify_flow(skb_in, flowi4_to_flowi(fl4));
rt = ip_route_output_key_hash(net, fl4, skb_in);
@@ -514,7 +533,7 @@ static struct rtable *icmp_route_lookup(
if (err)
goto relookup_failed;
- if (inet_addr_type_dev_table(net, skb_dst(skb_in)->dev,
+ if (inet_addr_type_dev_table(net, route_lookup_dev,
fl4_dec.saddr) == RTN_LOCAL) {
rt2 = __ip_route_output_key(net, &fl4_dec);
if (IS_ERR(rt2))
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 018/217] s390/disassembler: correct disassembly lines alignment
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (16 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 017/217] ipv4/icmp: l3mdev: Perform icmp error route lookup on source device routing table (v2) Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 019/217] mm/kmemleak.c: make cond_resched() rate-limiting more efficient Greg Kroah-Hartman
` (201 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vasily Gorbik, Martin Schwidefsky
From: Vasily Gorbik <gor@linux.vnet.ibm.com>
commit 26f4e759ef9b8a2bab1823d692ed6d56d40b66e3 upstream.
176.718956 Krnl Code: 00000000004d38b0: a54c0018 llihh %r4,24
176.718956 00000000004d38b4: b9080014 agr %r1,%r4
^
Using a tab to align disassembly lines which follow the first line with
"Krnl Code: " doesn't always work, e.g. if there is a prefix (timestamp
or syslog prefix) which is not 8 chars aligned. Go back to alignment
with spaces.
Fixes: b192571d1ae3 ("s390/disassembler: increase show_code buffer size")
Signed-off-by: Vasily Gorbik <gor@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/s390/kernel/dis.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -2018,7 +2018,7 @@ void show_code(struct pt_regs *regs)
start += opsize;
pr_cont("%s", buffer);
ptr = buffer;
- ptr += sprintf(ptr, "\n\t ");
+ ptr += sprintf(ptr, "\n ");
hops++;
}
pr_cont("\n");
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 019/217] mm/kmemleak.c: make cond_resched() rate-limiting more efficient
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (17 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 018/217] s390/disassembler: correct disassembly lines alignment Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 020/217] crypto: talitos - reduce max key size for SEC1 Greg Kroah-Hartman
` (200 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Linus Torvalds, Yisheng Xie,
Catalin Marinas, Michal Hocko, Andrew Morton
From: Andrew Morton <akpm@linux-foundation.org>
commit 13ab183d138f607d885e995d625e58d47678bf97 upstream.
Commit bde5f6bc68db ("kmemleak: add scheduling point to
kmemleak_scan()") tries to rate-limit the frequency of cond_resched()
calls, but does it in a way which might incur an expensive division
operation in the inner loop. Simplify this.
Fixes: bde5f6bc68db5 ("kmemleak: add scheduling point to kmemleak_scan()")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/kmemleak.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -1520,7 +1520,7 @@ static void kmemleak_scan(void)
if (page_count(page) == 0)
continue;
scan_block(page, page + 1, NULL);
- if (!(pfn % (MAX_SCAN_SIZE / sizeof(*page))))
+ if (!(pfn & 63))
cond_resched();
}
}
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 020/217] crypto: talitos - reduce max key size for SEC1
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (18 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 019/217] mm/kmemleak.c: make cond_resched() rate-limiting more efficient Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 021/217] powerpc/module64: Fix comment in R_PPC64_ENTRY handling Greg Kroah-Hartman
` (199 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Christophe Leroy, Herbert Xu
From: Christophe Leroy <christophe.leroy@c-s.fr>
commit b8fbdc2bc4e71b62646031d5df5f08aafe15d5ad upstream.
SEC1 doesn't support SHA384/512, so it doesn't require
longer keys.
This patch reduces the max key size when the driver
is built for SEC1 only.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 03d2c5114c95 ("crypto: talitos - Extend max key length for SHA384/512-HMAC and AEAD")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/crypto/talitos.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -816,7 +816,11 @@ static void talitos_unregister_rng(struc
* HMAC_SNOOP_NO_AFEA (HSNA) instead of type IPSEC_ESP
*/
#define TALITOS_CRA_PRIORITY_AEAD_HSNA (TALITOS_CRA_PRIORITY - 1)
+#ifdef CONFIG_CRYPTO_DEV_TALITOS_SEC2
#define TALITOS_MAX_KEY_SIZE (AES_MAX_KEY_SIZE + SHA512_BLOCK_SIZE)
+#else
+#define TALITOS_MAX_KEY_SIZE (AES_MAX_KEY_SIZE + SHA256_BLOCK_SIZE)
+#endif
#define TALITOS_MAX_IV_LENGTH 16 /* max of AES_BLOCK_SIZE, DES3_EDE_BLOCK_SIZE */
struct talitos_ctx {
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 021/217] powerpc/module64: Fix comment in R_PPC64_ENTRY handling
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (19 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 020/217] crypto: talitos - reduce max key size for SEC1 Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 022/217] powerpc/boot: Delete unneeded .globl _zimage_start Greg Kroah-Hartman
` (198 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Michael Ellerman
From: Michael Ellerman <mpe@ellerman.id.au>
commit 2fb0a2c989837c976b68233496bbaefb47cd3d6f upstream.
The comment here is wrong, the addi reads from r2 not r12. The code is
correct, 0x38420000 = addi r2,r2,0.
Fixes: a61674bdfc7c ("powerpc/module: Handle R_PPC64_ENTRY relocations")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/kernel/module_64.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -695,7 +695,7 @@ int apply_relocate_add(Elf64_Shdr *sechd
/*
* If found, replace it with:
* addis r2, r12, (.TOC.-func)@ha
- * addi r2, r12, (.TOC.-func)@l
+ * addi r2, r2, (.TOC.-func)@l
*/
((uint32_t *)location)[0] = 0x3c4c0000 + PPC_HA(value);
((uint32_t *)location)[1] = 0x38420000 + PPC_LO(value);
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 022/217] powerpc/boot: Delete unneeded .globl _zimage_start
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (20 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 021/217] powerpc/module64: Fix comment in R_PPC64_ENTRY handling Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 023/217] net: ll_temac: Remove left-over debug message Greg Kroah-Hartman
` (197 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Fangrui Song, Michael Ellerman
From: Fangrui Song <maskray@google.com>
commit 968339fad422a58312f67718691b717dac45c399 upstream.
.globl sets the symbol binding to STB_GLOBAL while .weak sets the
binding to STB_WEAK. GNU as let .weak override .globl since
binutils-gdb 5ca547dc2399a0a5d9f20626d4bf5547c3ccfddd (1996). Clang
integrated assembler let the last win but it may error in the future.
Since it is a convention that only one binding directive is used, just
delete .globl.
Fixes: ee9d21b3b358 ("powerpc/boot: Ensure _zimage_start is a weak symbol")
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200325164257.170229-1-maskray@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/boot/crt0.S | 3 ---
1 file changed, 3 deletions(-)
--- a/arch/powerpc/boot/crt0.S
+++ b/arch/powerpc/boot/crt0.S
@@ -49,9 +49,6 @@ p_end: .long _end
p_pstack: .long _platform_stack_top
#endif
- .globl _zimage_start
- /* Clang appears to require the .weak directive to be after the symbol
- * is defined. See https://bugs.llvm.org/show_bug.cgi?id=38921 */
.weak _zimage_start
_zimage_start:
.globl _zimage_start_lib
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 023/217] net: ll_temac: Remove left-over debug message
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (21 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 022/217] powerpc/boot: Delete unneeded .globl _zimage_start Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 024/217] mm/page_alloc: speed up the iteration of max_order Greg Kroah-Hartman
` (196 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Esben Haabendal, David S. Miller
From: Esben Haabendal <esben@geanix.com>
commit ce03b94ba682a67e8233c9ee3066071656ded58f upstream.
Fixes: f63963411942 ("net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY")
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/xilinx/ll_temac_main.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -736,10 +736,8 @@ temac_start_xmit(struct sk_buff *skb, st
/* Kick off the transfer */
lp->dma_out(lp, TX_TAILDESC_PTR, tail_p); /* DMA start */
- if (temac_check_tx_bd_space(lp, MAX_SKB_FRAGS + 1)) {
- netdev_info(ndev, "%s -> netif_stop_queue\n", __func__);
+ if (temac_check_tx_bd_space(lp, MAX_SKB_FRAGS + 1))
netif_stop_queue(ndev);
- }
return NETDEV_TX_OK;
}
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 024/217] mm/page_alloc: speed up the iteration of max_order
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (22 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 023/217] net: ll_temac: Remove left-over debug message Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 025/217] Revert "btrfs: compression: dont try to compress if we dont have enough pages" Greg Kroah-Hartman
` (195 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Muchun Song, Vlastimil Babka,
Oscar Salvador, David Hildenbrand, Andrew Morton, Linus Torvalds
From: Muchun Song <songmuchun@bytedance.com>
commit 7ad69832f37e3cea8557db6df7c793905f1135e8 upstream.
When we free a page whose order is very close to MAX_ORDER and greater
than pageblock_order, it wastes some CPU cycles to increase max_order to
MAX_ORDER one by one and check the pageblock migratetype of that page
repeatedly especially when MAX_ORDER is much larger than pageblock_order.
We also should not be checking migratetype of buddy when "order ==
MAX_ORDER - 1" as the buddy pfn may be invalid, so adjust the condition.
With the new check, we don't need the max_order check anymore, so we
replace it.
Also adjust max_order initialization so that it's lower by one than
previously, which makes the code hopefully more clear.
Link: https://lkml.kernel.org/r/20201204155109.55451-1-songmuchun@bytedance.com
Fixes: d9dddbf55667 ("mm/page_alloc: prevent merging between isolated and other pageblocks")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/page_alloc.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -815,7 +815,7 @@ static inline void __free_one_page(struc
struct page *buddy;
unsigned int max_order;
- max_order = min_t(unsigned int, MAX_ORDER, pageblock_order + 1);
+ max_order = min_t(unsigned int, MAX_ORDER - 1, pageblock_order);
VM_BUG_ON(!zone_is_initialized(zone));
VM_BUG_ON_PAGE(page->flags & PAGE_FLAGS_CHECK_AT_PREP, page);
@@ -828,7 +828,7 @@ static inline void __free_one_page(struc
VM_BUG_ON_PAGE(bad_range(zone, page), page);
continue_merging:
- while (order < max_order - 1) {
+ while (order < max_order) {
buddy_pfn = __find_buddy_pfn(pfn, order);
buddy = page + (buddy_pfn - pfn);
@@ -852,7 +852,7 @@ continue_merging:
pfn = combined_pfn;
order++;
}
- if (max_order < MAX_ORDER) {
+ if (order < MAX_ORDER - 1) {
/* If we are here, it means order is >= pageblock_order.
* We want to prevent merge between freepages on isolate
* pageblock and normal pageblock. Without this, pageblock
@@ -873,7 +873,7 @@ continue_merging:
is_migrate_isolate(buddy_mt)))
goto done_merging;
}
- max_order++;
+ max_order = order + 1;
goto continue_merging;
}
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 025/217] Revert "btrfs: compression: dont try to compress if we dont have enough pages"
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (23 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 024/217] mm/page_alloc: speed up the iteration of max_order Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 026/217] usb: host: xhci-rcar: Dont reload firmware after the completion Greg Kroah-Hartman
` (194 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zygo Blaxell, Qu Wenruo, David Sterba
From: Qu Wenruo <wqu@suse.com>
commit 4e9655763b82a91e4c341835bb504a2b1590f984 upstream.
This reverts commit f2165627319ffd33a6217275e5690b1ab5c45763.
[BUG]
It's no longer possible to create compressed inline extent after commit
f2165627319f ("btrfs: compression: don't try to compress if we don't
have enough pages").
[CAUSE]
For compression code, there are several possible reasons we have a range
that needs to be compressed while it's no more than one page.
- Compressed inline write
The data is always smaller than one sector and the test lacks the
condition to properly recognize a non-inline extent.
- Compressed subpage write
For the incoming subpage compressed write support, we require page
alignment of the delalloc range.
And for 64K page size, we can compress just one page into smaller
sectors.
For those reasons, the requirement for the data to be more than one page
is not correct, and is already causing regression for compressed inline
data writeback. The idea of skipping one page to avoid wasting CPU time
could be revisited in the future.
[FIX]
Fix it by reverting the offending commit.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/afa2742.c084f5d6.17b6b08dffc@tnonline.net
Fixes: f2165627319f ("btrfs: compression: don't try to compress if we don't have enough pages")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/inode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -540,7 +540,7 @@ again:
* inode has not been flagged as nocompress. This flag can
* change at any time if we discover bad compression ratios.
*/
- if (nr_pages > 1 && inode_need_compress(inode, start, end)) {
+ if (inode_need_compress(inode, start, end)) {
WARN_ON(pages);
pages = kcalloc(nr_pages, sizeof(struct page *), GFP_NOFS);
if (!pages) {
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 026/217] usb: host: xhci-rcar: Dont reload firmware after the completion
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (24 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 025/217] Revert "btrfs: compression: dont try to compress if we dont have enough pages" Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 027/217] x86/reboot: Limit Dell Optiplex 990 quirk to early BIOS versions Greg Kroah-Hartman
` (193 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Yoshihiro Shimoda
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
commit 57f3ffdc11143f56f1314972fe86fe17a0dcde85 upstream.
According to the datasheet, "Upon the completion of FW Download,
there is no need to write or reload FW.". Otherwise, it's possible
to cause unexpected behaviors. So, adds such a condition.
Fixes: 4ac8918f3a73 ("usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers")
Cc: stable@vger.kernel.org # v3.17+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210827063227.81990-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci-rcar.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -152,6 +152,13 @@ static int xhci_rcar_download_firmware(s
const struct soc_device_attribute *attr;
const char *firmware_name;
+ /*
+ * According to the datasheet, "Upon the completion of FW Download,
+ * there is no need to write or reload FW".
+ */
+ if (readl(regs + RCAR_USB3_DL_CTRL) & RCAR_USB3_DL_CTRL_FW_SUCCESS)
+ return 0;
+
attr = soc_device_match(rcar_quirks_match);
if (attr)
quirks = (uintptr_t)attr->data;
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 027/217] x86/reboot: Limit Dell Optiplex 990 quirk to early BIOS versions
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (25 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 026/217] usb: host: xhci-rcar: Dont reload firmware after the completion Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 028/217] PCI: Call Max Payload Size-related fixup quirks early Greg Kroah-Hartman
` (192 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Paul Gortmaker, Thomas Gleixner
From: Paul Gortmaker <paul.gortmaker@windriver.com>
commit a729691b541f6e63043beae72e635635abe5dc09 upstream.
When this platform was relatively new in November 2011, with early BIOS
revisions, a reboot quirk was added in commit 6be30bb7d750 ("x86/reboot:
Blacklist Dell OptiPlex 990 known to require PCI reboot")
However, this quirk (and several others) are open-ended to all BIOS
versions and left no automatic expiry if/when the system BIOS fixed the
issue, meaning that nobody is likely to come along and re-test.
What is really problematic with using PCI reboot as this quirk does, is
that it causes this platform to do a full power down, wait one second,
and then power back on. This is less than ideal if one is using it for
boot testing and/or bisecting kernels when legacy rotating hard disks
are installed.
It was only by chance that the quirk was noticed in dmesg - and when
disabled it turned out that it wasn't required anymore (BIOS A24), and a
default reboot would work fine without the "harshness" of power cycling the
machine (and disks) down and up like the PCI reboot does.
Doing a bit more research, it seems that the "newest" BIOS for which the
issue was reported[1] was version A06, however Dell[2] seemed to suggest
only up to and including version A05, with the A06 having a large number of
fixes[3] listed.
As is typical with a new platform, the initial BIOS updates come frequently
and then taper off (and in this case, with a revival for CPU CVEs); a
search for O990-A<ver>.exe reveals the following dates:
A02 16 Mar 2011
A03 11 May 2011
A06 14 Sep 2011
A07 24 Oct 2011
A10 08 Dec 2011
A14 06 Sep 2012
A16 15 Oct 2012
A18 30 Sep 2013
A19 23 Sep 2015
A20 02 Jun 2017
A23 07 Mar 2018
A24 21 Aug 2018
While it's overkill to flash and test each of the above, it would seem
likely that the issue was contained within A0x BIOS versions, given the
dates above and the dates of issue reports[4] from distros. So rather than
just throw out the quirk entirely, limit the scope to just those early BIOS
versions, in case people are still running systems from 2011 with the
original as-shipped early A0x BIOS versions.
[1] https://lore.kernel.org/lkml/1320373471-3942-1-git-send-email-trenn@suse.de/
[2] https://www.dell.com/support/kbdoc/en-ca/000131908/linux-based-operating-systems-stall-upon-reboot-on-optiplex-390-790-990-systems
[3] https://www.dell.com/support/home/en-ca/drivers/driversdetails?driverid=85j10
[4] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/768039
Fixes: 6be30bb7d750 ("x86/reboot: Blacklist Dell OptiPlex 990 known to require PCI reboot")
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210530162447.996461-4-paul.gortmaker@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kernel/reboot.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -388,10 +388,11 @@ static const struct dmi_system_id reboot
},
{ /* Handle problems with rebooting on the OptiPlex 990. */
.callback = set_pci_reboot,
- .ident = "Dell OptiPlex 990",
+ .ident = "Dell OptiPlex 990 BIOS A0x",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"),
+ DMI_MATCH(DMI_BIOS_VERSION, "A0"),
},
},
{ /* Handle problems with rebooting on Dell 300's */
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 028/217] PCI: Call Max Payload Size-related fixup quirks early
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (26 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 027/217] x86/reboot: Limit Dell Optiplex 990 quirk to early BIOS versions Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 029/217] regmap: fix the offset of register error log Greg Kroah-Hartman
` (191 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Marek Behún, Bjorn Helgaas
From: Marek Behún <kabel@kernel.org>
commit b8da302e2955fe4d41eb9d48199242674d77dbe0 upstream.
pci_device_add() calls HEADER fixups after pci_configure_device(), which
configures Max Payload Size.
Convert MPS-related fixups to EARLY fixups so pci_configure_mps() takes
them into account.
Fixes: 27d868b5e6cfa ("PCI: Set MPS to match upstream bridge")
Link: https://lore.kernel.org/r/20210624171418.27194-1-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/quirks.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3034,12 +3034,12 @@ static void fixup_mpss_256(struct pci_de
{
dev->pcie_mpss = 1; /* 256 bytes */
}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
- PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
- PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
- PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLARFLARE,
+ PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLARFLARE,
+ PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLARFLARE,
+ PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256);
/* Intel 5000 and 5100 Memory controllers have an errata with read completion
* coalescing (which is enabled by default on some BIOSes) and MPS of 256B.
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 029/217] regmap: fix the offset of register error log
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (27 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 028/217] PCI: Call Max Payload Size-related fixup quirks early Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 030/217] crypto: mxs-dcp - Check for DMA mapping errors Greg Kroah-Hartman
` (190 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jeongtae Park, Mark Brown, Sasha Levin
From: Jeongtae Park <jeongtae.park@gmail.com>
[ Upstream commit 1852f5ed358147095297a09cc3c6f160208a676d ]
This patch fixes the offset of register error log
by using regmap_get_offset().
Signed-off-by: Jeongtae Park <jeongtae.park@gmail.com>
Link: https://lore.kernel.org/r/20210701142630.44936-1-jeongtae.park@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/regmap/regmap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 4e0cc40ad9ce..1c5ff22d92f1 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -1378,7 +1378,7 @@ int _regmap_raw_write(struct regmap *map, unsigned int reg,
if (ret) {
dev_err(map->dev,
"Error in caching of register: %x ret: %d\n",
- reg + i, ret);
+ reg + regmap_get_offset(map, i), ret);
return ret;
}
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 030/217] crypto: mxs-dcp - Check for DMA mapping errors
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (28 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 029/217] regmap: fix the offset of register error log Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 031/217] power: supply: axp288_fuel_gauge: Report register-address on readb / writeb errors Greg Kroah-Hartman
` (189 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Anderson, Richard Weinberger,
Herbert Xu, Sasha Levin
From: Sean Anderson <sean.anderson@seco.com>
[ Upstream commit df6313d707e575a679ada3313358289af24454c0 ]
After calling dma_map_single(), we must also call dma_mapping_error().
This fixes the following warning when compiling with CONFIG_DMA_API_DEBUG:
[ 311.241478] WARNING: CPU: 0 PID: 428 at kernel/dma/debug.c:1027 check_unmap+0x79c/0x96c
[ 311.249547] DMA-API: mxs-dcp 2280000.crypto: device driver failed to check map error[device address=0x00000000860cb080] [size=32 bytes] [mapped as single]
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/mxs-dcp.c | 45 +++++++++++++++++++++++++++++++---------
1 file changed, 35 insertions(+), 10 deletions(-)
diff --git a/drivers/crypto/mxs-dcp.c b/drivers/crypto/mxs-dcp.c
index eb569cf06309..96b6808847c7 100644
--- a/drivers/crypto/mxs-dcp.c
+++ b/drivers/crypto/mxs-dcp.c
@@ -167,15 +167,19 @@ static struct dcp *global_sdcp;
static int mxs_dcp_start_dma(struct dcp_async_ctx *actx)
{
+ int dma_err;
struct dcp *sdcp = global_sdcp;
const int chan = actx->chan;
uint32_t stat;
unsigned long ret;
struct dcp_dma_desc *desc = &sdcp->coh->desc[actx->chan];
-
dma_addr_t desc_phys = dma_map_single(sdcp->dev, desc, sizeof(*desc),
DMA_TO_DEVICE);
+ dma_err = dma_mapping_error(sdcp->dev, desc_phys);
+ if (dma_err)
+ return dma_err;
+
reinit_completion(&sdcp->completion[chan]);
/* Clear status register. */
@@ -213,18 +217,29 @@ static int mxs_dcp_start_dma(struct dcp_async_ctx *actx)
static int mxs_dcp_run_aes(struct dcp_async_ctx *actx,
struct ablkcipher_request *req, int init)
{
+ dma_addr_t key_phys, src_phys, dst_phys;
struct dcp *sdcp = global_sdcp;
struct dcp_dma_desc *desc = &sdcp->coh->desc[actx->chan];
struct dcp_aes_req_ctx *rctx = ablkcipher_request_ctx(req);
int ret;
- dma_addr_t key_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_key,
- 2 * AES_KEYSIZE_128,
- DMA_TO_DEVICE);
- dma_addr_t src_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_in_buf,
- DCP_BUF_SZ, DMA_TO_DEVICE);
- dma_addr_t dst_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_out_buf,
- DCP_BUF_SZ, DMA_FROM_DEVICE);
+ key_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_key,
+ 2 * AES_KEYSIZE_128, DMA_TO_DEVICE);
+ ret = dma_mapping_error(sdcp->dev, key_phys);
+ if (ret)
+ return ret;
+
+ src_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_in_buf,
+ DCP_BUF_SZ, DMA_TO_DEVICE);
+ ret = dma_mapping_error(sdcp->dev, src_phys);
+ if (ret)
+ goto err_src;
+
+ dst_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_out_buf,
+ DCP_BUF_SZ, DMA_FROM_DEVICE);
+ ret = dma_mapping_error(sdcp->dev, dst_phys);
+ if (ret)
+ goto err_dst;
if (actx->fill % AES_BLOCK_SIZE) {
dev_err(sdcp->dev, "Invalid block size!\n");
@@ -262,10 +277,12 @@ static int mxs_dcp_run_aes(struct dcp_async_ctx *actx,
ret = mxs_dcp_start_dma(actx);
aes_done_run:
+ dma_unmap_single(sdcp->dev, dst_phys, DCP_BUF_SZ, DMA_FROM_DEVICE);
+err_dst:
+ dma_unmap_single(sdcp->dev, src_phys, DCP_BUF_SZ, DMA_TO_DEVICE);
+err_src:
dma_unmap_single(sdcp->dev, key_phys, 2 * AES_KEYSIZE_128,
DMA_TO_DEVICE);
- dma_unmap_single(sdcp->dev, src_phys, DCP_BUF_SZ, DMA_TO_DEVICE);
- dma_unmap_single(sdcp->dev, dst_phys, DCP_BUF_SZ, DMA_FROM_DEVICE);
return ret;
}
@@ -565,6 +582,10 @@ static int mxs_dcp_run_sha(struct ahash_request *req)
dma_addr_t buf_phys = dma_map_single(sdcp->dev, sdcp->coh->sha_in_buf,
DCP_BUF_SZ, DMA_TO_DEVICE);
+ ret = dma_mapping_error(sdcp->dev, buf_phys);
+ if (ret)
+ return ret;
+
/* Fill in the DMA descriptor. */
desc->control0 = MXS_DCP_CONTROL0_DECR_SEMAPHORE |
MXS_DCP_CONTROL0_INTERRUPT |
@@ -597,6 +618,10 @@ static int mxs_dcp_run_sha(struct ahash_request *req)
if (rctx->fini) {
digest_phys = dma_map_single(sdcp->dev, sdcp->coh->sha_out_buf,
DCP_SHA_PAY_SZ, DMA_FROM_DEVICE);
+ ret = dma_mapping_error(sdcp->dev, digest_phys);
+ if (ret)
+ goto done_run;
+
desc->control0 |= MXS_DCP_CONTROL0_HASH_TERM;
desc->payload = digest_phys;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 031/217] power: supply: axp288_fuel_gauge: Report register-address on readb / writeb errors
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (29 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 030/217] crypto: mxs-dcp - Check for DMA mapping errors Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 032/217] crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop() Greg Kroah-Hartman
` (188 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans de Goede, Sebastian Reichel,
Sasha Levin
From: Hans de Goede <hdegoede@redhat.com>
[ Upstream commit caa534c3ba40c6e8352b42cbbbca9ba481814ac8 ]
When fuel_gauge_reg_readb()/_writeb() fails, report which register we
were trying to read / write when the error happened.
Also reword the message a bit:
- Drop the axp288 prefix, dev_err() already prints this
- Switch from telegram / abbreviated style to a normal sentence, aligning
the message with those from fuel_gauge_read_*bit_word()
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/power/supply/axp288_fuel_gauge.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/power/supply/axp288_fuel_gauge.c b/drivers/power/supply/axp288_fuel_gauge.c
index a8dcabc32721..1fe18c365c87 100644
--- a/drivers/power/supply/axp288_fuel_gauge.c
+++ b/drivers/power/supply/axp288_fuel_gauge.c
@@ -142,7 +142,7 @@ static int fuel_gauge_reg_readb(struct axp288_fg_info *info, int reg)
}
if (ret < 0) {
- dev_err(&info->pdev->dev, "axp288 reg read err:%d\n", ret);
+ dev_err(&info->pdev->dev, "Error reading reg 0x%02x err: %d\n", reg, ret);
return ret;
}
@@ -156,7 +156,7 @@ static int fuel_gauge_reg_writeb(struct axp288_fg_info *info, int reg, u8 val)
ret = regmap_write(info->regmap, reg, (unsigned int)val);
if (ret < 0)
- dev_err(&info->pdev->dev, "axp288 reg write err:%d\n", ret);
+ dev_err(&info->pdev->dev, "Error writing reg 0x%02x err: %d\n", reg, ret);
return ret;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 032/217] crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (30 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 031/217] power: supply: axp288_fuel_gauge: Report register-address on readb / writeb errors Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 033/217] udf: Check LVID earlier Greg Kroah-Hartman
` (187 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lokesh Vutla, Tero Kristo,
Tony Lindgren, Herbert Xu, Sasha Levin
From: Tony Lindgren <tony@atomide.com>
[ Upstream commit fe28140b3393b0ba1eb95cc109f974a7e58b26fd ]
We should not clear FLAGS_DMA_ACTIVE before omap_sham_update_dma_stop() is
done calling dma_unmap_sg(). We already clear FLAGS_DMA_ACTIVE at the
end of omap_sham_update_dma_stop().
The early clearing of FLAGS_DMA_ACTIVE is not causing issues as we do not
need to defer anything based on FLAGS_DMA_ACTIVE currently. So this can be
applied as clean-up.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/omap-sham.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
index e34e9561e77d..adf958956982 100644
--- a/drivers/crypto/omap-sham.c
+++ b/drivers/crypto/omap-sham.c
@@ -1746,7 +1746,7 @@ static void omap_sham_done_task(unsigned long data)
if (test_and_clear_bit(FLAGS_OUTPUT_READY, &dd->flags))
goto finish;
} else if (test_bit(FLAGS_DMA_READY, &dd->flags)) {
- if (test_and_clear_bit(FLAGS_DMA_ACTIVE, &dd->flags)) {
+ if (test_bit(FLAGS_DMA_ACTIVE, &dd->flags)) {
omap_sham_update_dma_stop(dd);
if (dd->err) {
err = dd->err;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 033/217] udf: Check LVID earlier
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (31 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 032/217] crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop() Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 034/217] isofs: joliet: Fix iocharset=utf8 mount option Greg Kroah-Hartman
` (186 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+7fbfe5fed73ebb675748,
Jan Kara, Sasha Levin
From: Jan Kara <jack@suse.cz>
[ Upstream commit 781d2a9a2fc7d0be53a072794dc03ef6de770f3d ]
We were checking validity of LVID entries only when getting
implementation use information from LVID in udf_sb_lvidiu(). However if
the LVID is suitably corrupted, it can cause problems also to code such
as udf_count_free() which doesn't use udf_sb_lvidiu(). So check validity
of LVID already when loading it from the disk and just disable LVID
altogether when it is not valid.
Reported-by: syzbot+7fbfe5fed73ebb675748@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/udf/super.c | 25 ++++++++++++++++---------
1 file changed, 16 insertions(+), 9 deletions(-)
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 2b8147ecd97f..70b56011b823 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -113,16 +113,10 @@ struct logicalVolIntegrityDescImpUse *udf_sb_lvidiu(struct super_block *sb)
return NULL;
lvid = (struct logicalVolIntegrityDesc *)UDF_SB(sb)->s_lvid_bh->b_data;
partnum = le32_to_cpu(lvid->numOfPartitions);
- if ((sb->s_blocksize - sizeof(struct logicalVolIntegrityDescImpUse) -
- offsetof(struct logicalVolIntegrityDesc, impUse)) /
- (2 * sizeof(uint32_t)) < partnum) {
- udf_err(sb, "Logical volume integrity descriptor corrupted "
- "(numOfPartitions = %u)!\n", partnum);
- return NULL;
- }
/* The offset is to skip freeSpaceTable and sizeTable arrays */
offset = partnum * 2 * sizeof(uint32_t);
- return (struct logicalVolIntegrityDescImpUse *)&(lvid->impUse[offset]);
+ return (struct logicalVolIntegrityDescImpUse *)
+ (((uint8_t *)(lvid + 1)) + offset);
}
/* UDF filesystem type */
@@ -1565,6 +1559,7 @@ static void udf_load_logicalvolint(struct super_block *sb, struct kernel_extent_
struct udf_sb_info *sbi = UDF_SB(sb);
struct logicalVolIntegrityDesc *lvid;
int indirections = 0;
+ u32 parts, impuselen;
while (++indirections <= UDF_MAX_LVID_NESTING) {
final_bh = NULL;
@@ -1591,15 +1586,27 @@ static void udf_load_logicalvolint(struct super_block *sb, struct kernel_extent_
lvid = (struct logicalVolIntegrityDesc *)final_bh->b_data;
if (lvid->nextIntegrityExt.extLength == 0)
- return;
+ goto check;
loc = leea_to_cpu(lvid->nextIntegrityExt);
}
udf_warn(sb, "Too many LVID indirections (max %u), ignoring.\n",
UDF_MAX_LVID_NESTING);
+out_err:
brelse(sbi->s_lvid_bh);
sbi->s_lvid_bh = NULL;
+ return;
+check:
+ parts = le32_to_cpu(lvid->numOfPartitions);
+ impuselen = le32_to_cpu(lvid->lengthOfImpUse);
+ if (parts >= sb->s_blocksize || impuselen >= sb->s_blocksize ||
+ sizeof(struct logicalVolIntegrityDesc) + impuselen +
+ 2 * parts * sizeof(u32) > sb->s_blocksize) {
+ udf_warn(sb, "Corrupted LVID (parts=%u, impuselen=%u), "
+ "ignoring.\n", parts, impuselen);
+ goto out_err;
+ }
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 034/217] isofs: joliet: Fix iocharset=utf8 mount option
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (32 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 033/217] udf: Check LVID earlier Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 035/217] nvme-rdma: dont update queue count when failing to set io queues Greg Kroah-Hartman
` (185 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pali Rohár, Jan Kara, Sasha Levin
From: Pali Rohár <pali@kernel.org>
[ Upstream commit 28ce50f8d96ec9035f60c9348294ea26b94db944 ]
Currently iocharset=utf8 mount option is broken. To use UTF-8 as iocharset,
it is required to use utf8 mount option.
Fix iocharset=utf8 mount option to use be equivalent to the utf8 mount
option.
If UTF-8 as iocharset is used then s_nls_iocharset is set to NULL. So
simplify code around, remove s_utf8 field as to distinguish between UTF-8
and non-UTF-8 it is needed just to check if s_nls_iocharset is set to NULL
or not.
Link: https://lore.kernel.org/r/20210808162453.1653-5-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/isofs/inode.c | 27 +++++++++++++--------------
fs/isofs/isofs.h | 1 -
fs/isofs/joliet.c | 4 +---
3 files changed, 14 insertions(+), 18 deletions(-)
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index a4994e25e19e..f1134752cea3 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -157,7 +157,6 @@ struct iso9660_options{
unsigned int overriderockperm:1;
unsigned int uid_set:1;
unsigned int gid_set:1;
- unsigned int utf8:1;
unsigned char map;
unsigned char check;
unsigned int blocksize;
@@ -357,7 +356,6 @@ static int parse_options(char *options, struct iso9660_options *popt)
popt->gid = GLOBAL_ROOT_GID;
popt->uid = GLOBAL_ROOT_UID;
popt->iocharset = NULL;
- popt->utf8 = 0;
popt->overriderockperm = 0;
popt->session=-1;
popt->sbsector=-1;
@@ -390,10 +388,13 @@ static int parse_options(char *options, struct iso9660_options *popt)
case Opt_cruft:
popt->cruft = 1;
break;
+#ifdef CONFIG_JOLIET
case Opt_utf8:
- popt->utf8 = 1;
+ kfree(popt->iocharset);
+ popt->iocharset = kstrdup("utf8", GFP_KERNEL);
+ if (!popt->iocharset)
+ return 0;
break;
-#ifdef CONFIG_JOLIET
case Opt_iocharset:
kfree(popt->iocharset);
popt->iocharset = match_strdup(&args[0]);
@@ -496,7 +497,6 @@ static int isofs_show_options(struct seq_file *m, struct dentry *root)
if (sbi->s_nocompress) seq_puts(m, ",nocompress");
if (sbi->s_overriderockperm) seq_puts(m, ",overriderockperm");
if (sbi->s_showassoc) seq_puts(m, ",showassoc");
- if (sbi->s_utf8) seq_puts(m, ",utf8");
if (sbi->s_check) seq_printf(m, ",check=%c", sbi->s_check);
if (sbi->s_mapping) seq_printf(m, ",map=%c", sbi->s_mapping);
@@ -519,9 +519,10 @@ static int isofs_show_options(struct seq_file *m, struct dentry *root)
seq_printf(m, ",fmode=%o", sbi->s_fmode);
#ifdef CONFIG_JOLIET
- if (sbi->s_nls_iocharset &&
- strcmp(sbi->s_nls_iocharset->charset, CONFIG_NLS_DEFAULT) != 0)
+ if (sbi->s_nls_iocharset)
seq_printf(m, ",iocharset=%s", sbi->s_nls_iocharset->charset);
+ else
+ seq_puts(m, ",iocharset=utf8");
#endif
return 0;
}
@@ -865,14 +866,13 @@ root_found:
sbi->s_nls_iocharset = NULL;
#ifdef CONFIG_JOLIET
- if (joliet_level && opt.utf8 == 0) {
+ if (joliet_level) {
char *p = opt.iocharset ? opt.iocharset : CONFIG_NLS_DEFAULT;
- sbi->s_nls_iocharset = load_nls(p);
- if (! sbi->s_nls_iocharset) {
- /* Fail only if explicit charset specified */
- if (opt.iocharset)
+ if (strcmp(p, "utf8") != 0) {
+ sbi->s_nls_iocharset = opt.iocharset ?
+ load_nls(opt.iocharset) : load_nls_default();
+ if (!sbi->s_nls_iocharset)
goto out_freesbi;
- sbi->s_nls_iocharset = load_nls_default();
}
}
#endif
@@ -888,7 +888,6 @@ root_found:
sbi->s_gid = opt.gid;
sbi->s_uid_set = opt.uid_set;
sbi->s_gid_set = opt.gid_set;
- sbi->s_utf8 = opt.utf8;
sbi->s_nocompress = opt.nocompress;
sbi->s_overriderockperm = opt.overriderockperm;
/*
diff --git a/fs/isofs/isofs.h b/fs/isofs/isofs.h
index 8e42b4fbefdc..b4b9d4861c9d 100644
--- a/fs/isofs/isofs.h
+++ b/fs/isofs/isofs.h
@@ -44,7 +44,6 @@ struct isofs_sb_info {
unsigned char s_session;
unsigned int s_high_sierra:1;
unsigned int s_rock:2;
- unsigned int s_utf8:1;
unsigned int s_cruft:1; /* Broken disks with high byte of length
* containing junk */
unsigned int s_nocompress:1;
diff --git a/fs/isofs/joliet.c b/fs/isofs/joliet.c
index be8b6a9d0b92..c0f04a1e7f69 100644
--- a/fs/isofs/joliet.c
+++ b/fs/isofs/joliet.c
@@ -41,14 +41,12 @@ uni16_to_x8(unsigned char *ascii, __be16 *uni, int len, struct nls_table *nls)
int
get_joliet_filename(struct iso_directory_record * de, unsigned char *outname, struct inode * inode)
{
- unsigned char utf8;
struct nls_table *nls;
unsigned char len = 0;
- utf8 = ISOFS_SB(inode->i_sb)->s_utf8;
nls = ISOFS_SB(inode->i_sb)->s_nls_iocharset;
- if (utf8) {
+ if (!nls) {
len = utf16s_to_utf8s((const wchar_t *) de->name,
de->name_len[0] >> 1, UTF16_BIG_ENDIAN,
outname, PAGE_SIZE);
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 035/217] nvme-rdma: dont update queue count when failing to set io queues
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (33 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 034/217] isofs: joliet: Fix iocharset=utf8 mount option Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 036/217] power: supply: max17042_battery: fix typo in MAx17042_TOFF Greg Kroah-Hartman
` (184 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ruozhu Li, Sagi Grimberg,
Christoph Hellwig, Sasha Levin
From: Ruozhu Li <liruozhu@huawei.com>
[ Upstream commit 85032874f80ba17bf187de1d14d9603bf3f582b8 ]
We update ctrl->queue_count and schedule another reconnect when io queue
count is zero.But we will never try to create any io queue in next reco-
nnection, because ctrl->queue_count already set to zero.We will end up
having an admin-only session in Live state, which is exactly what we try
to avoid in the original patch.
Update ctrl->queue_count after queue_count zero checking to fix it.
Signed-off-by: Ruozhu Li <liruozhu@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvme/host/rdma.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index 57e1c0dd63c4..11fd3a7484ac 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -654,13 +654,13 @@ static int nvme_rdma_alloc_io_queues(struct nvme_rdma_ctrl *ctrl)
if (ret)
return ret;
- ctrl->ctrl.queue_count = nr_io_queues + 1;
- if (ctrl->ctrl.queue_count < 2) {
+ if (nr_io_queues == 0) {
dev_err(ctrl->ctrl.device,
"unable to set any I/O queues\n");
return -ENOMEM;
}
+ ctrl->ctrl.queue_count = nr_io_queues + 1;
dev_info(ctrl->ctrl.device,
"creating %d I/O queues.\n", nr_io_queues);
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 036/217] power: supply: max17042_battery: fix typo in MAx17042_TOFF
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (34 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 035/217] nvme-rdma: dont update queue count when failing to set io queues Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 037/217] s390/cio: add dev_busid sysfs entry for each subchannel Greg Kroah-Hartman
` (183 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sebastian Krzyszkowiak,
Sebastian Reichel, Sasha Levin
From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
[ Upstream commit ed0d0a0506025f06061325cedae1bbebd081620a ]
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/power/supply/max17042_battery.c | 2 +-
include/linux/power/max17042_battery.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c
index 911d42366ef1..e824ab19318a 100644
--- a/drivers/power/supply/max17042_battery.c
+++ b/drivers/power/supply/max17042_battery.c
@@ -717,7 +717,7 @@ static inline void max17042_override_por_values(struct max17042_chip *chip)
struct max17042_config_data *config = chip->pdata->config_data;
max17042_override_por(map, MAX17042_TGAIN, config->tgain);
- max17042_override_por(map, MAx17042_TOFF, config->toff);
+ max17042_override_por(map, MAX17042_TOFF, config->toff);
max17042_override_por(map, MAX17042_CGAIN, config->cgain);
max17042_override_por(map, MAX17042_COFF, config->coff);
diff --git a/include/linux/power/max17042_battery.h b/include/linux/power/max17042_battery.h
index a7ed29baf44a..86e5ad8aeee4 100644
--- a/include/linux/power/max17042_battery.h
+++ b/include/linux/power/max17042_battery.h
@@ -82,7 +82,7 @@ enum max17042_register {
MAX17042_RelaxCFG = 0x2A,
MAX17042_MiscCFG = 0x2B,
MAX17042_TGAIN = 0x2C,
- MAx17042_TOFF = 0x2D,
+ MAX17042_TOFF = 0x2D,
MAX17042_CGAIN = 0x2E,
MAX17042_COFF = 0x2F,
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 037/217] s390/cio: add dev_busid sysfs entry for each subchannel
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (35 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 036/217] power: supply: max17042_battery: fix typo in MAx17042_TOFF Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 038/217] libata: fix ata_host_start() Greg Kroah-Hartman
` (182 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vineeth Vijayan, Peter Oberparleiter,
Vasily Gorbik, Sasha Levin
From: Vineeth Vijayan <vneethv@linux.ibm.com>
[ Upstream commit d3683c055212bf910d4e318f7944910ce10dbee6 ]
Introduce dev_busid, which exports the device-id associated with the
io-subchannel (and message-subchannel). The dev_busid indicates that of
the device which may be physically installed on the corrosponding
subchannel. The dev_busid value "none" indicates that the subchannel
is not valid, there is no I/O device currently associated with the
subchannel.
The dev_busid information would be helpful to write device-specific
udev-rules associated with the subchannel. The dev_busid interface would
be available even when the sch is not bound to any driver or if there is
no operational device connected on it. Hence this attribute can be used to
write udev-rules which are specific to the device associated with the
subchannel.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/s390/cio/css.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index e2026d54dd37..435e804b6b8b 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -330,9 +330,26 @@ static ssize_t pimpampom_show(struct device *dev,
}
static DEVICE_ATTR(pimpampom, 0444, pimpampom_show, NULL);
+static ssize_t dev_busid_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct subchannel *sch = to_subchannel(dev);
+ struct pmcw *pmcw = &sch->schib.pmcw;
+
+ if ((pmcw->st == SUBCHANNEL_TYPE_IO ||
+ pmcw->st == SUBCHANNEL_TYPE_MSG) && pmcw->dnv)
+ return sysfs_emit(buf, "0.%x.%04x\n", sch->schid.ssid,
+ pmcw->dev);
+ else
+ return sysfs_emit(buf, "none\n");
+}
+static DEVICE_ATTR_RO(dev_busid);
+
static struct attribute *io_subchannel_type_attrs[] = {
&dev_attr_chpids.attr,
&dev_attr_pimpampom.attr,
+ &dev_attr_dev_busid.attr,
NULL,
};
ATTRIBUTE_GROUPS(io_subchannel_type);
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 038/217] libata: fix ata_host_start()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (36 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 037/217] s390/cio: add dev_busid sysfs entry for each subchannel Greg Kroah-Hartman
@ 2021-09-20 16:40 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 039/217] crypto: qat - do not ignore errors from enable_vf2pf_comms() Greg Kroah-Hartman
` (181 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Damien Le Moal,
Hannes Reinecke, Jens Axboe, Sasha Levin
From: Damien Le Moal <damien.lemoal@wdc.com>
[ Upstream commit 355a8031dc174450ccad2a61c513ad7222d87a97 ]
The loop on entry of ata_host_start() may not initialize host->ops to a
non NULL value. The test on the host_stop field of host->ops must then
be preceded by a check that host->ops is not NULL.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210816014456.2191776-3-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/ata/libata-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c28b0ca24907..0f0ed04de886 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6339,7 +6339,7 @@ int ata_host_start(struct ata_host *host)
have_stop = 1;
}
- if (host->ops->host_stop)
+ if (host->ops && host->ops->host_stop)
have_stop = 1;
if (have_stop) {
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 039/217] crypto: qat - do not ignore errors from enable_vf2pf_comms()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (37 preceding siblings ...)
2021-09-20 16:40 ` [PATCH 4.14 038/217] libata: fix ata_host_start() Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 040/217] crypto: qat - handle both source of interrupt in VF ISR Greg Kroah-Hartman
` (180 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Giovanni Cabiddu, Marco Chiappero,
Fiona Trahe, Herbert Xu, Sasha Levin
From: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
[ Upstream commit 5147f0906d50a9d26f2b8698cd06b5680e9867ff ]
The function adf_dev_init() ignores the error code reported by
enable_vf2pf_comms(). If the latter fails, e.g. the VF is not compatible
with the pf, then the load of the VF driver progresses.
This patch changes adf_dev_init() so that the error code from
enable_vf2pf_comms() is returned to the caller.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/qat/qat_common/adf_init.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/crypto/qat/qat_common/adf_init.c b/drivers/crypto/qat/qat_common/adf_init.c
index 26556c713049..7a7d43c47534 100644
--- a/drivers/crypto/qat/qat_common/adf_init.c
+++ b/drivers/crypto/qat/qat_common/adf_init.c
@@ -105,6 +105,7 @@ int adf_dev_init(struct adf_accel_dev *accel_dev)
struct service_hndl *service;
struct list_head *list_itr;
struct adf_hw_device_data *hw_data = accel_dev->hw_device;
+ int ret;
if (!hw_data) {
dev_err(&GET_DEV(accel_dev),
@@ -171,9 +172,9 @@ int adf_dev_init(struct adf_accel_dev *accel_dev)
}
hw_data->enable_error_correction(accel_dev);
- hw_data->enable_vf2pf_comms(accel_dev);
+ ret = hw_data->enable_vf2pf_comms(accel_dev);
- return 0;
+ return ret;
}
EXPORT_SYMBOL_GPL(adf_dev_init);
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 040/217] crypto: qat - handle both source of interrupt in VF ISR
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (38 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 039/217] crypto: qat - do not ignore errors from enable_vf2pf_comms() Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 041/217] crypto: qat - fix reuse of completion variable Greg Kroah-Hartman
` (179 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Giovanni Cabiddu, Marco Chiappero,
Fiona Trahe, Herbert Xu, Sasha Levin
From: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
[ Upstream commit 0a73c762e1eee33a5e5dc0e3488f1b7cd17249b3 ]
The top half of the VF drivers handled only a source at the time.
If an interrupt for PF2VF and bundle occurred at the same time, the ISR
scheduled only the bottom half for PF2VF.
This patch fixes the VF top half so that if both sources of interrupt
trigger at the same time, both bottom halves are scheduled.
This patch is based on earlier work done by Conor McLoughlin.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/qat/qat_common/adf_vf_isr.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/crypto/qat/qat_common/adf_vf_isr.c b/drivers/crypto/qat/qat_common/adf_vf_isr.c
index df9a1f35b832..ef90902c8200 100644
--- a/drivers/crypto/qat/qat_common/adf_vf_isr.c
+++ b/drivers/crypto/qat/qat_common/adf_vf_isr.c
@@ -203,6 +203,7 @@ static irqreturn_t adf_isr(int irq, void *privdata)
struct adf_bar *pmisc =
&GET_BARS(accel_dev)[hw_data->get_misc_bar_id(hw_data)];
void __iomem *pmisc_bar_addr = pmisc->virt_addr;
+ bool handled = false;
u32 v_int;
/* Read VF INT source CSR to determine the source of VF interrupt */
@@ -215,7 +216,7 @@ static irqreturn_t adf_isr(int irq, void *privdata)
/* Schedule tasklet to handle interrupt BH */
tasklet_hi_schedule(&accel_dev->vf.pf2vf_bh_tasklet);
- return IRQ_HANDLED;
+ handled = true;
}
/* Check bundle interrupt */
@@ -227,10 +228,10 @@ static irqreturn_t adf_isr(int irq, void *privdata)
WRITE_CSR_INT_FLAG_AND_COL(bank->csr_addr, bank->bank_number,
0);
tasklet_hi_schedule(&bank->resp_handler);
- return IRQ_HANDLED;
+ handled = true;
}
- return IRQ_NONE;
+ return handled ? IRQ_HANDLED : IRQ_NONE;
}
static int adf_request_msi_irq(struct adf_accel_dev *accel_dev)
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 041/217] crypto: qat - fix reuse of completion variable
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (39 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 040/217] crypto: qat - handle both source of interrupt in VF ISR Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 042/217] crypto: qat - fix naming for init/shutdown VF to PF notifications Greg Kroah-Hartman
` (178 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marco Chiappero, Giovanni Cabiddu,
Fiona Trahe, Herbert Xu, Sasha Levin
From: Marco Chiappero <marco.chiappero@intel.com>
[ Upstream commit 3d655732b0199562267a05c7ff69ecdd11632939 ]
Use reinit_completion() to set to a clean state a completion variable,
used to coordinate the VF to PF request-response flow, before every
new VF request.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/qat/qat_common/adf_pf2vf_msg.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
index b3875fdf6cd7..9dab2cc11fdf 100644
--- a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
+++ b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
@@ -361,6 +361,8 @@ static int adf_vf2pf_request_version(struct adf_accel_dev *accel_dev)
msg |= ADF_PFVF_COMPATIBILITY_VERSION << ADF_VF2PF_COMPAT_VER_REQ_SHIFT;
BUILD_BUG_ON(ADF_PFVF_COMPATIBILITY_VERSION > 255);
+ reinit_completion(&accel_dev->vf.iov_msg_completion);
+
/* Send request from VF to PF */
ret = adf_iov_putmsg(accel_dev, msg, 0);
if (ret) {
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 042/217] crypto: qat - fix naming for init/shutdown VF to PF notifications
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (40 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 041/217] crypto: qat - fix reuse of completion variable Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 043/217] crypto: qat - do not export adf_iov_putmsg() Greg Kroah-Hartman
` (177 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marco Chiappero, Giovanni Cabiddu,
Fiona Trahe, Herbert Xu, Sasha Levin
From: Marco Chiappero <marco.chiappero@intel.com>
[ Upstream commit b90c1c4d3fa8cd90f4e8245b13564380fd0bfad1 ]
At start and shutdown, VFs notify the PF about their state. These
notifications are carried out through a message exchange using the PFVF
protocol.
Function names lead to believe they do perform init or shutdown logic.
This is to fix the naming to better reflect their purpose.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/qat/qat_c3xxxvf/adf_c3xxxvf_hw_data.c | 4 ++--
drivers/crypto/qat/qat_c62xvf/adf_c62xvf_hw_data.c | 4 ++--
drivers/crypto/qat/qat_common/adf_common_drv.h | 8 ++++----
drivers/crypto/qat/qat_common/adf_vf2pf_msg.c | 12 ++++++------
.../qat/qat_dh895xccvf/adf_dh895xccvf_hw_data.c | 4 ++--
5 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/crypto/qat/qat_c3xxxvf/adf_c3xxxvf_hw_data.c b/drivers/crypto/qat/qat_c3xxxvf/adf_c3xxxvf_hw_data.c
index d2d0ae445fd8..7c7d49a8a403 100644
--- a/drivers/crypto/qat/qat_c3xxxvf/adf_c3xxxvf_hw_data.c
+++ b/drivers/crypto/qat/qat_c3xxxvf/adf_c3xxxvf_hw_data.c
@@ -123,10 +123,10 @@ void adf_init_hw_data_c3xxxiov(struct adf_hw_device_data *hw_data)
hw_data->enable_error_correction = adf_vf_void_noop;
hw_data->init_admin_comms = adf_vf_int_noop;
hw_data->exit_admin_comms = adf_vf_void_noop;
- hw_data->send_admin_init = adf_vf2pf_init;
+ hw_data->send_admin_init = adf_vf2pf_notify_init;
hw_data->init_arb = adf_vf_int_noop;
hw_data->exit_arb = adf_vf_void_noop;
- hw_data->disable_iov = adf_vf2pf_shutdown;
+ hw_data->disable_iov = adf_vf2pf_notify_shutdown;
hw_data->get_accel_mask = get_accel_mask;
hw_data->get_ae_mask = get_ae_mask;
hw_data->get_num_accels = get_num_accels;
diff --git a/drivers/crypto/qat/qat_c62xvf/adf_c62xvf_hw_data.c b/drivers/crypto/qat/qat_c62xvf/adf_c62xvf_hw_data.c
index 38e4bc04f407..90e8a7564756 100644
--- a/drivers/crypto/qat/qat_c62xvf/adf_c62xvf_hw_data.c
+++ b/drivers/crypto/qat/qat_c62xvf/adf_c62xvf_hw_data.c
@@ -123,10 +123,10 @@ void adf_init_hw_data_c62xiov(struct adf_hw_device_data *hw_data)
hw_data->enable_error_correction = adf_vf_void_noop;
hw_data->init_admin_comms = adf_vf_int_noop;
hw_data->exit_admin_comms = adf_vf_void_noop;
- hw_data->send_admin_init = adf_vf2pf_init;
+ hw_data->send_admin_init = adf_vf2pf_notify_init;
hw_data->init_arb = adf_vf_int_noop;
hw_data->exit_arb = adf_vf_void_noop;
- hw_data->disable_iov = adf_vf2pf_shutdown;
+ hw_data->disable_iov = adf_vf2pf_notify_shutdown;
hw_data->get_accel_mask = get_accel_mask;
hw_data->get_ae_mask = get_ae_mask;
hw_data->get_num_accels = get_num_accels;
diff --git a/drivers/crypto/qat/qat_common/adf_common_drv.h b/drivers/crypto/qat/qat_common/adf_common_drv.h
index d78f8d5c89c3..289dd7e48d4a 100644
--- a/drivers/crypto/qat/qat_common/adf_common_drv.h
+++ b/drivers/crypto/qat/qat_common/adf_common_drv.h
@@ -239,8 +239,8 @@ void adf_enable_vf2pf_interrupts(struct adf_accel_dev *accel_dev,
void adf_enable_pf2vf_interrupts(struct adf_accel_dev *accel_dev);
void adf_disable_pf2vf_interrupts(struct adf_accel_dev *accel_dev);
-int adf_vf2pf_init(struct adf_accel_dev *accel_dev);
-void adf_vf2pf_shutdown(struct adf_accel_dev *accel_dev);
+int adf_vf2pf_notify_init(struct adf_accel_dev *accel_dev);
+void adf_vf2pf_notify_shutdown(struct adf_accel_dev *accel_dev);
int adf_init_pf_wq(void);
void adf_exit_pf_wq(void);
int adf_init_vf_wq(void);
@@ -263,12 +263,12 @@ static inline void adf_disable_pf2vf_interrupts(struct adf_accel_dev *accel_dev)
{
}
-static inline int adf_vf2pf_init(struct adf_accel_dev *accel_dev)
+static inline int adf_vf2pf_notify_init(struct adf_accel_dev *accel_dev)
{
return 0;
}
-static inline void adf_vf2pf_shutdown(struct adf_accel_dev *accel_dev)
+static inline void adf_vf2pf_notify_shutdown(struct adf_accel_dev *accel_dev)
{
}
diff --git a/drivers/crypto/qat/qat_common/adf_vf2pf_msg.c b/drivers/crypto/qat/qat_common/adf_vf2pf_msg.c
index cd5f37dffe8a..1830194567e8 100644
--- a/drivers/crypto/qat/qat_common/adf_vf2pf_msg.c
+++ b/drivers/crypto/qat/qat_common/adf_vf2pf_msg.c
@@ -49,14 +49,14 @@
#include "adf_pf2vf_msg.h"
/**
- * adf_vf2pf_init() - send init msg to PF
+ * adf_vf2pf_notify_init() - send init msg to PF
* @accel_dev: Pointer to acceleration VF device.
*
* Function sends an init messge from the VF to a PF
*
* Return: 0 on success, error code otherwise.
*/
-int adf_vf2pf_init(struct adf_accel_dev *accel_dev)
+int adf_vf2pf_notify_init(struct adf_accel_dev *accel_dev)
{
u32 msg = (ADF_VF2PF_MSGORIGIN_SYSTEM |
(ADF_VF2PF_MSGTYPE_INIT << ADF_VF2PF_MSGTYPE_SHIFT));
@@ -69,17 +69,17 @@ int adf_vf2pf_init(struct adf_accel_dev *accel_dev)
set_bit(ADF_STATUS_PF_RUNNING, &accel_dev->status);
return 0;
}
-EXPORT_SYMBOL_GPL(adf_vf2pf_init);
+EXPORT_SYMBOL_GPL(adf_vf2pf_notify_init);
/**
- * adf_vf2pf_shutdown() - send shutdown msg to PF
+ * adf_vf2pf_notify_shutdown() - send shutdown msg to PF
* @accel_dev: Pointer to acceleration VF device.
*
* Function sends a shutdown messge from the VF to a PF
*
* Return: void
*/
-void adf_vf2pf_shutdown(struct adf_accel_dev *accel_dev)
+void adf_vf2pf_notify_shutdown(struct adf_accel_dev *accel_dev)
{
u32 msg = (ADF_VF2PF_MSGORIGIN_SYSTEM |
(ADF_VF2PF_MSGTYPE_SHUTDOWN << ADF_VF2PF_MSGTYPE_SHIFT));
@@ -89,4 +89,4 @@ void adf_vf2pf_shutdown(struct adf_accel_dev *accel_dev)
dev_err(&GET_DEV(accel_dev),
"Failed to send Shutdown event to PF\n");
}
-EXPORT_SYMBOL_GPL(adf_vf2pf_shutdown);
+EXPORT_SYMBOL_GPL(adf_vf2pf_notify_shutdown);
diff --git a/drivers/crypto/qat/qat_dh895xccvf/adf_dh895xccvf_hw_data.c b/drivers/crypto/qat/qat_dh895xccvf/adf_dh895xccvf_hw_data.c
index a3b4dd8099a7..3a8361c83f0b 100644
--- a/drivers/crypto/qat/qat_dh895xccvf/adf_dh895xccvf_hw_data.c
+++ b/drivers/crypto/qat/qat_dh895xccvf/adf_dh895xccvf_hw_data.c
@@ -123,10 +123,10 @@ void adf_init_hw_data_dh895xcciov(struct adf_hw_device_data *hw_data)
hw_data->enable_error_correction = adf_vf_void_noop;
hw_data->init_admin_comms = adf_vf_int_noop;
hw_data->exit_admin_comms = adf_vf_void_noop;
- hw_data->send_admin_init = adf_vf2pf_init;
+ hw_data->send_admin_init = adf_vf2pf_notify_init;
hw_data->init_arb = adf_vf_int_noop;
hw_data->exit_arb = adf_vf_void_noop;
- hw_data->disable_iov = adf_vf2pf_shutdown;
+ hw_data->disable_iov = adf_vf2pf_notify_shutdown;
hw_data->get_accel_mask = get_accel_mask;
hw_data->get_ae_mask = get_ae_mask;
hw_data->get_num_accels = get_num_accels;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 043/217] crypto: qat - do not export adf_iov_putmsg()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (41 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 042/217] crypto: qat - fix naming for init/shutdown VF to PF notifications Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 044/217] udf_get_extendedattr() had no boundary checks Greg Kroah-Hartman
` (176 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Giovanni Cabiddu, Fiona Trahe,
Herbert Xu, Sasha Levin
From: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
[ Upstream commit 645ae0af1840199086c33e4f841892ebee73f615 ]
The function adf_iov_putmsg() is only used inside the intel_qat module
therefore should not be exported.
Remove EXPORT_SYMBOL for the function adf_iov_putmsg().
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/qat/qat_common/adf_pf2vf_msg.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
index 9dab2cc11fdf..c64481160b71 100644
--- a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
+++ b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
@@ -231,7 +231,6 @@ int adf_iov_putmsg(struct adf_accel_dev *accel_dev, u32 msg, u8 vf_nr)
return ret;
}
-EXPORT_SYMBOL_GPL(adf_iov_putmsg);
void adf_vf2pf_req_hndl(struct adf_accel_vf_info *vf_info)
{
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 044/217] udf_get_extendedattr() had no boundary checks.
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (42 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 043/217] crypto: qat - do not export adf_iov_putmsg() Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 045/217] m68k: emu: Fix invalid free in nfeth_cleanup() Greg Kroah-Hartman
` (175 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stian Skjelstad, Jan Kara, Sasha Levin
From: Stian Skjelstad <stian.skjelstad@gmail.com>
[ Upstream commit 58bc6d1be2f3b0ceecb6027dfa17513ec6aa2abb ]
When parsing the ExtendedAttr data, malicous or corrupt attribute length
could cause kernel hangs and buffer overruns in some special cases.
Link: https://lore.kernel.org/r/20210822093332.25234-1-stian.skjelstad@gmail.com
Signed-off-by: Stian Skjelstad <stian.skjelstad@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/udf/misc.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/fs/udf/misc.c b/fs/udf/misc.c
index 3949c4bec3a3..e5f4dcde309f 100644
--- a/fs/udf/misc.c
+++ b/fs/udf/misc.c
@@ -173,13 +173,22 @@ struct genericFormat *udf_get_extendedattr(struct inode *inode, uint32_t type,
else
offset = le32_to_cpu(eahd->appAttrLocation);
- while (offset < iinfo->i_lenEAttr) {
+ while (offset + sizeof(*gaf) < iinfo->i_lenEAttr) {
+ uint32_t attrLength;
+
gaf = (struct genericFormat *)&ea[offset];
+ attrLength = le32_to_cpu(gaf->attrLength);
+
+ /* Detect undersized elements and buffer overflows */
+ if ((attrLength < sizeof(*gaf)) ||
+ (attrLength > (iinfo->i_lenEAttr - offset)))
+ break;
+
if (le32_to_cpu(gaf->attrType) == type &&
gaf->attrSubtype == subtype)
return gaf;
else
- offset += le32_to_cpu(gaf->attrLength);
+ offset += attrLength;
}
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 045/217] m68k: emu: Fix invalid free in nfeth_cleanup()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (43 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 044/217] udf_get_extendedattr() had no boundary checks Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 046/217] spi: spi-fsl-dspi: Fix issue with uninitialized dma_slave_config Greg Kroah-Hartman
` (174 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pavel Skripkin, Geert Uytterhoeven,
Sasha Levin
From: Pavel Skripkin <paskripkin@gmail.com>
[ Upstream commit 761608f5cf70e8876c2f0e39ca54b516bdcb7c12 ]
In the for loop all nfeth_dev array members should be freed, not only
the first one. Freeing only the first array member can cause
double-free bugs and memory leaks.
Fixes: 9cd7b148312f ("m68k/atari: ARAnyM - Add support for network access")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210705204727.10743-1-paskripkin@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/m68k/emu/nfeth.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/m68k/emu/nfeth.c b/arch/m68k/emu/nfeth.c
index e45ce4243aaa..76262dc40e79 100644
--- a/arch/m68k/emu/nfeth.c
+++ b/arch/m68k/emu/nfeth.c
@@ -258,8 +258,8 @@ static void __exit nfeth_cleanup(void)
for (i = 0; i < MAX_UNIT; i++) {
if (nfeth_dev[i]) {
- unregister_netdev(nfeth_dev[0]);
- free_netdev(nfeth_dev[0]);
+ unregister_netdev(nfeth_dev[i]);
+ free_netdev(nfeth_dev[i]);
}
}
free_irq(nfEtherIRQ, nfeth_interrupt);
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 046/217] spi: spi-fsl-dspi: Fix issue with uninitialized dma_slave_config
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (44 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 045/217] m68k: emu: Fix invalid free in nfeth_cleanup() Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 047/217] spi: spi-pic32: " Greg Kroah-Hartman
` (173 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sanchayan Maity, Vladimir Oltean,
Peter Ujfalusi, Vinod Koul, Tony Lindgren, Mark Brown,
Sasha Levin
From: Tony Lindgren <tony@atomide.com>
[ Upstream commit 209ab223ad5b18e437289235e3bde12593b94ac4 ]
Depending on the DMA driver being used, the struct dma_slave_config may
need to be initialized to zero for the unused data.
For example, we have three DMA drivers using src_port_window_size and
dst_port_window_size. If these are left uninitialized, it can cause DMA
failures.
For spi-fsl-dspi, this is probably not currently an issue but is still
good to fix though.
Fixes: 90ba37033cb9 ("spi: spi-fsl-dspi: Add DMA support for Vybrid")
Cc: Sanchayan Maity <maitysanchayan@gmail.com>
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210810081727.19491-1-tony@atomide.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-fsl-dspi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index ed114f00a6d1..59f18e344bfb 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -394,6 +394,7 @@ static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr)
goto err_rx_dma_buf;
}
+ memset(&cfg, 0, sizeof(cfg));
cfg.src_addr = phy_addr + SPI_POPR;
cfg.dst_addr = phy_addr + SPI_PUSHR;
cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 047/217] spi: spi-pic32: Fix issue with uninitialized dma_slave_config
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (45 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 046/217] spi: spi-fsl-dspi: Fix issue with uninitialized dma_slave_config Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 048/217] clocksource/drivers/sh_cmt: Fix wrong setting if dont request IRQ for clock source channel Greg Kroah-Hartman
` (172 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Purna Chandra Mandal, Peter Ujfalusi,
Vinod Koul, Tony Lindgren, Mark Brown, Sasha Levin
From: Tony Lindgren <tony@atomide.com>
[ Upstream commit 976c1de1de147bb7f4e0d87482f375221c05aeaf ]
Depending on the DMA driver being used, the struct dma_slave_config may
need to be initialized to zero for the unused data.
For example, we have three DMA drivers using src_port_window_size and
dst_port_window_size. If these are left uninitialized, it can cause DMA
failures.
For spi-pic32, this is probably not currently an issue but is still good to
fix though.
Fixes: 1bcb9f8ceb67 ("spi: spi-pic32: Add PIC32 SPI master driver")
Cc: Purna Chandra Mandal <purna.mandal@microchip.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210810081727.19491-2-tony@atomide.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-pic32.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/spi/spi-pic32.c b/drivers/spi/spi-pic32.c
index 661a40c653e9..d8cdb13ce3e4 100644
--- a/drivers/spi/spi-pic32.c
+++ b/drivers/spi/spi-pic32.c
@@ -369,6 +369,7 @@ static int pic32_spi_dma_config(struct pic32_spi *pic32s, u32 dma_width)
struct dma_slave_config cfg;
int ret;
+ memset(&cfg, 0, sizeof(cfg));
cfg.device_fc = true;
cfg.src_addr = pic32s->dma_base + buf_offset;
cfg.dst_addr = pic32s->dma_base + buf_offset;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 048/217] clocksource/drivers/sh_cmt: Fix wrong setting if dont request IRQ for clock source channel
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (46 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 047/217] spi: spi-pic32: " Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 049/217] crypto: qat - use proper type for vf_mask Greg Kroah-Hartman
` (171 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Phong Hoang, Niklas Söderlund,
Daniel Lezcano, Sasha Levin
From: Phong Hoang <phong.hoang.wz@renesas.com>
[ Upstream commit be83c3b6e7b8ff22f72827a613bf6f3aa5afadbb ]
If CMT instance has at least two channels, one channel will be used
as a clock source and another one used as a clock event device.
In that case, IRQ is not requested for clock source channel so
sh_cmt_clock_event_program_verify() might work incorrectly.
Besides, when a channel is only used for clock source, don't need to
re-set the next match_value since it should be maximum timeout as
it still is.
On the other hand, due to no IRQ, total_cycles is not counted up
when reaches compare match time (timer counter resets to zero),
so sh_cmt_clocksource_read() returns unexpected value.
Therefore, use 64-bit clocksoure's mask for 32-bit or 16-bit variants
will also lead to wrong delta calculation. Hence, this mask should
correspond to timer counter width, and above function just returns
the raw value of timer counter register.
Fixes: bfa76bb12f23 ("clocksource: sh_cmt: Request IRQ for clock event device only")
Fixes: 37e7742c55ba ("clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines")
Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210422123443.73334-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clocksource/sh_cmt.c | 30 ++++++++++++++++++------------
1 file changed, 18 insertions(+), 12 deletions(-)
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 3cd62f7c33e3..48eeee53a586 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -570,7 +570,8 @@ static int sh_cmt_start(struct sh_cmt_channel *ch, unsigned long flag)
ch->flags |= flag;
/* setup timeout if no clockevent */
- if ((flag == FLAG_CLOCKSOURCE) && (!(ch->flags & FLAG_CLOCKEVENT)))
+ if (ch->cmt->num_channels == 1 &&
+ flag == FLAG_CLOCKSOURCE && (!(ch->flags & FLAG_CLOCKEVENT)))
__sh_cmt_set_next(ch, ch->max_match_value);
out:
raw_spin_unlock_irqrestore(&ch->lock, flags);
@@ -606,20 +607,25 @@ static struct sh_cmt_channel *cs_to_sh_cmt(struct clocksource *cs)
static u64 sh_cmt_clocksource_read(struct clocksource *cs)
{
struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
- unsigned long flags;
u32 has_wrapped;
- u64 value;
- u32 raw;
- raw_spin_lock_irqsave(&ch->lock, flags);
- value = ch->total_cycles;
- raw = sh_cmt_get_counter(ch, &has_wrapped);
+ if (ch->cmt->num_channels == 1) {
+ unsigned long flags;
+ u64 value;
+ u32 raw;
- if (unlikely(has_wrapped))
- raw += ch->match_value + 1;
- raw_spin_unlock_irqrestore(&ch->lock, flags);
+ raw_spin_lock_irqsave(&ch->lock, flags);
+ value = ch->total_cycles;
+ raw = sh_cmt_get_counter(ch, &has_wrapped);
+
+ if (unlikely(has_wrapped))
+ raw += ch->match_value + 1;
+ raw_spin_unlock_irqrestore(&ch->lock, flags);
+
+ return value + raw;
+ }
- return value + raw;
+ return sh_cmt_get_counter(ch, &has_wrapped);
}
static int sh_cmt_clocksource_enable(struct clocksource *cs)
@@ -682,7 +688,7 @@ static int sh_cmt_register_clocksource(struct sh_cmt_channel *ch,
cs->disable = sh_cmt_clocksource_disable;
cs->suspend = sh_cmt_clocksource_suspend;
cs->resume = sh_cmt_clocksource_resume;
- cs->mask = CLOCKSOURCE_MASK(sizeof(u64) * 8);
+ cs->mask = CLOCKSOURCE_MASK(ch->cmt->info->width);
cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
dev_info(&ch->cmt->pdev->dev, "ch%u: used as clock source\n",
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 049/217] crypto: qat - use proper type for vf_mask
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (47 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 048/217] clocksource/drivers/sh_cmt: Fix wrong setting if dont request IRQ for clock source channel Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 050/217] certs: Trigger creation of RSA module signing key if its not an RSA key Greg Kroah-Hartman
` (170 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Giovanni Cabiddu, Marco Chiappero,
Fiona Trahe, Herbert Xu, Sasha Levin
From: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
[ Upstream commit 462354d986b6a89c6449b85f17aaacf44e455216 ]
Replace vf_mask type with unsigned long to avoid a stack-out-of-bound.
This is to fix the following warning reported by KASAN the first time
adf_msix_isr_ae() gets called.
[ 692.091987] BUG: KASAN: stack-out-of-bounds in find_first_bit+0x28/0x50
[ 692.092017] Read of size 8 at addr ffff88afdf789e60 by task swapper/32/0
[ 692.092076] Call Trace:
[ 692.092089] <IRQ>
[ 692.092101] dump_stack+0x9c/0xcf
[ 692.092132] print_address_description.constprop.0+0x18/0x130
[ 692.092164] ? find_first_bit+0x28/0x50
[ 692.092185] kasan_report.cold+0x7f/0x111
[ 692.092213] ? static_obj+0x10/0x80
[ 692.092234] ? find_first_bit+0x28/0x50
[ 692.092262] find_first_bit+0x28/0x50
[ 692.092288] adf_msix_isr_ae+0x16e/0x230 [intel_qat]
Fixes: ed8ccaef52fa ("crypto: qat - Add support for SRIOV")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/qat/qat_common/adf_isr.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/crypto/qat/qat_common/adf_isr.c b/drivers/crypto/qat/qat_common/adf_isr.c
index 2c0be14309cf..7877ba677220 100644
--- a/drivers/crypto/qat/qat_common/adf_isr.c
+++ b/drivers/crypto/qat/qat_common/adf_isr.c
@@ -59,6 +59,8 @@
#include "adf_transport_access_macros.h"
#include "adf_transport_internal.h"
+#define ADF_MAX_NUM_VFS 32
+
static int adf_enable_msix(struct adf_accel_dev *accel_dev)
{
struct adf_accel_pci *pci_dev_info = &accel_dev->accel_pci_dev;
@@ -111,7 +113,7 @@ static irqreturn_t adf_msix_isr_ae(int irq, void *dev_ptr)
struct adf_bar *pmisc =
&GET_BARS(accel_dev)[hw_data->get_misc_bar_id(hw_data)];
void __iomem *pmisc_bar_addr = pmisc->virt_addr;
- u32 vf_mask;
+ unsigned long vf_mask;
/* Get the interrupt sources triggered by VFs */
vf_mask = ((ADF_CSR_RD(pmisc_bar_addr, ADF_ERRSOU5) &
@@ -132,8 +134,7 @@ static irqreturn_t adf_msix_isr_ae(int irq, void *dev_ptr)
* unless the VF is malicious and is attempting to
* flood the host OS with VF2PF interrupts.
*/
- for_each_set_bit(i, (const unsigned long *)&vf_mask,
- (sizeof(vf_mask) * BITS_PER_BYTE)) {
+ for_each_set_bit(i, &vf_mask, ADF_MAX_NUM_VFS) {
vf_info = accel_dev->pf.vf_info + i;
if (!__ratelimit(&vf_info->vf2pf_ratelimit)) {
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 050/217] certs: Trigger creation of RSA module signing key if its not an RSA key
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (48 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 049/217] crypto: qat - use proper type for vf_mask Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 051/217] soc: rockchip: ROCKCHIP_GRF should not default to y, unconditionally Greg Kroah-Hartman
` (169 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David Howells, David Woodhouse,
Stefan Berger, Jarkko Sakkinen, Sasha Levin
From: Stefan Berger <stefanb@linux.ibm.com>
[ Upstream commit ea35e0d5df6c92fa2e124bb1b91d09b2240715ba ]
Address a kbuild issue where a developer created an ECDSA key for signing
kernel modules and then builds an older version of the kernel, when bi-
secting the kernel for example, that does not support ECDSA keys.
If openssl is installed, trigger the creation of an RSA module signing
key if it is not an RSA key.
Fixes: cfc411e7fff3 ("Move certificate handling to its own directory")
Cc: David Howells <dhowells@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
certs/Makefile | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/certs/Makefile b/certs/Makefile
index 5d0999b9e21b..ca3c71e3a3d9 100644
--- a/certs/Makefile
+++ b/certs/Makefile
@@ -46,11 +46,19 @@ endif
redirect_openssl = 2>&1
quiet_redirect_openssl = 2>&1
silent_redirect_openssl = 2>/dev/null
+openssl_available = $(shell openssl help 2>/dev/null && echo yes)
# We do it this way rather than having a boolean option for enabling an
# external private key, because 'make randconfig' might enable such a
# boolean option and we unfortunately can't make it depend on !RANDCONFIG.
ifeq ($(CONFIG_MODULE_SIG_KEY),"certs/signing_key.pem")
+
+ifeq ($(openssl_available),yes)
+X509TEXT=$(shell openssl x509 -in "certs/signing_key.pem" -text 2>/dev/null)
+
+$(if $(findstring rsaEncryption,$(X509TEXT)),,$(shell rm -f "certs/signing_key.pem"))
+endif
+
$(obj)/signing_key.pem: $(obj)/x509.genkey
@$(kecho) "###"
@$(kecho) "### Now generating an X.509 key pair to be used for signing modules."
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 051/217] soc: rockchip: ROCKCHIP_GRF should not default to y, unconditionally
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (49 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 050/217] certs: Trigger creation of RSA module signing key if its not an RSA key Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 052/217] media: dvb-usb: fix uninit-value in dvb_usb_adapter_dvb_init Greg Kroah-Hartman
` (168 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Geert Uytterhoeven, Heiko Stuebner,
Sasha Levin
From: Geert Uytterhoeven <geert+renesas@glider.be>
[ Upstream commit 2a1c55d4762dd34a8b0f2e36fb01b7b16b60735b ]
Merely enabling CONFIG_COMPILE_TEST should not enable additional code.
To fix this, restrict the automatic enabling of ROCKCHIP_GRF to
ARCH_ROCKCHIP, and ask the user in case of compile-testing.
Fixes: 4c58063d4258f6be ("soc: rockchip: add driver handling grf setup")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210208143855.418374-1-geert+renesas@glider.be
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/rockchip/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/rockchip/Kconfig b/drivers/soc/rockchip/Kconfig
index 20da55d9cbb1..d483b0e29b81 100644
--- a/drivers/soc/rockchip/Kconfig
+++ b/drivers/soc/rockchip/Kconfig
@@ -5,8 +5,8 @@ if ARCH_ROCKCHIP || COMPILE_TEST
#
config ROCKCHIP_GRF
- bool
- default y
+ bool "Rockchip General Register Files support" if COMPILE_TEST
+ default y if ARCH_ROCKCHIP
help
The General Register Files are a central component providing
special additional settings registers for a lot of soc-components.
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 052/217] media: dvb-usb: fix uninit-value in dvb_usb_adapter_dvb_init
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (50 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 051/217] soc: rockchip: ROCKCHIP_GRF should not default to y, unconditionally Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 053/217] media: dvb-usb: fix uninit-value in vp702x_read_mac_addr Greg Kroah-Hartman
` (167 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+e27b4fd589762b0b9329,
Dongliang Mu, Sean Young, Mauro Carvalho Chehab, Sasha Levin
From: Dongliang Mu <mudongliangabcd@gmail.com>
[ Upstream commit c5453769f77ce19a5b03f1f49946fd3f8a374009 ]
If dibusb_read_eeprom_byte fails, the mac address is not initialized.
And nova_t_read_mac_address does not handle this failure, which leads to
the uninit-value in dvb_usb_adapter_dvb_init.
Fix this by handling the failure of dibusb_read_eeprom_byte.
Reported-by: syzbot+e27b4fd589762b0b9329@syzkaller.appspotmail.com
Fixes: 786baecfe78f ("[media] dvb-usb: move it to drivers/media/usb/dvb-usb")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/usb/dvb-usb/nova-t-usb2.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/media/usb/dvb-usb/nova-t-usb2.c b/drivers/media/usb/dvb-usb/nova-t-usb2.c
index 1babd3341910..016a6d1ad279 100644
--- a/drivers/media/usb/dvb-usb/nova-t-usb2.c
+++ b/drivers/media/usb/dvb-usb/nova-t-usb2.c
@@ -133,7 +133,7 @@ ret:
static int nova_t_read_mac_address (struct dvb_usb_device *d, u8 mac[6])
{
- int i;
+ int i, ret;
u8 b;
mac[0] = 0x00;
@@ -142,7 +142,9 @@ static int nova_t_read_mac_address (struct dvb_usb_device *d, u8 mac[6])
/* this is a complete guess, but works for my box */
for (i = 136; i < 139; i++) {
- dibusb_read_eeprom_byte(d,i, &b);
+ ret = dibusb_read_eeprom_byte(d, i, &b);
+ if (ret)
+ return ret;
mac[5 - (i - 136)] = b;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 053/217] media: dvb-usb: fix uninit-value in vp702x_read_mac_addr
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (51 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 052/217] media: dvb-usb: fix uninit-value in dvb_usb_adapter_dvb_init Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 054/217] media: go7007: remove redundant initialization Greg Kroah-Hartman
` (166 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dongliang Mu, Sean Young,
Mauro Carvalho Chehab, Sasha Levin
From: Dongliang Mu <mudongliangabcd@gmail.com>
[ Upstream commit 797c061ad715a9a1480eb73f44b6939fbe3209ed ]
If vp702x_usb_in_op fails, the mac address is not initialized.
And vp702x_read_mac_addr does not handle this failure, which leads to
the uninit-value in dvb_usb_adapter_dvb_init.
Fix this by handling the failure of vp702x_usb_in_op.
Fixes: 786baecfe78f ("[media] dvb-usb: move it to drivers/media/usb/dvb-usb")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/usb/dvb-usb/vp702x.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/media/usb/dvb-usb/vp702x.c b/drivers/media/usb/dvb-usb/vp702x.c
index 40de33de90a7..5c3b0a7ca27e 100644
--- a/drivers/media/usb/dvb-usb/vp702x.c
+++ b/drivers/media/usb/dvb-usb/vp702x.c
@@ -294,16 +294,22 @@ static int vp702x_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
static int vp702x_read_mac_addr(struct dvb_usb_device *d,u8 mac[6])
{
u8 i, *buf;
+ int ret;
struct vp702x_device_state *st = d->priv;
mutex_lock(&st->buf_mutex);
buf = st->buf;
- for (i = 6; i < 12; i++)
- vp702x_usb_in_op(d, READ_EEPROM_REQ, i, 1, &buf[i - 6], 1);
+ for (i = 6; i < 12; i++) {
+ ret = vp702x_usb_in_op(d, READ_EEPROM_REQ, i, 1,
+ &buf[i - 6], 1);
+ if (ret < 0)
+ goto err;
+ }
memcpy(mac, buf, 6);
+err:
mutex_unlock(&st->buf_mutex);
- return 0;
+ return ret;
}
static int vp702x_frontend_attach(struct dvb_usb_adapter *adap)
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 054/217] media: go7007: remove redundant initialization
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (52 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 053/217] media: dvb-usb: fix uninit-value in vp702x_read_mac_addr Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 055/217] Bluetooth: sco: prevent information leak in sco_conn_defer_accept() Greg Kroah-Hartman
` (165 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pavel Skripkin, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
From: Pavel Skripkin <paskripkin@gmail.com>
[ Upstream commit 6f5885a7750545973bf1a942d2f0f129aef0aa06 ]
In go7007_alloc() kzalloc() is used for struct go7007
allocation. It means that there is no need in zeroing
any members, because kzalloc will take care of it.
Removing these reduntant initialization steps increases
execution speed a lot:
Before:
+ 86.802 us | go7007_alloc();
After:
+ 29.595 us | go7007_alloc();
Fixes: 866b8695d67e8 ("Staging: add the go7007 video driver")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/usb/go7007/go7007-driver.c | 26 ------------------------
1 file changed, 26 deletions(-)
diff --git a/drivers/media/usb/go7007/go7007-driver.c b/drivers/media/usb/go7007/go7007-driver.c
index 05b1126f263e..d861d7225f49 100644
--- a/drivers/media/usb/go7007/go7007-driver.c
+++ b/drivers/media/usb/go7007/go7007-driver.c
@@ -698,49 +698,23 @@ struct go7007 *go7007_alloc(const struct go7007_board_info *board,
struct device *dev)
{
struct go7007 *go;
- int i;
go = kzalloc(sizeof(struct go7007), GFP_KERNEL);
if (go == NULL)
return NULL;
go->dev = dev;
go->board_info = board;
- go->board_id = 0;
go->tuner_type = -1;
- go->channel_number = 0;
- go->name[0] = 0;
mutex_init(&go->hw_lock);
init_waitqueue_head(&go->frame_waitq);
spin_lock_init(&go->spinlock);
go->status = STATUS_INIT;
- memset(&go->i2c_adapter, 0, sizeof(go->i2c_adapter));
- go->i2c_adapter_online = 0;
- go->interrupt_available = 0;
init_waitqueue_head(&go->interrupt_waitq);
- go->input = 0;
go7007_update_board(go);
- go->encoder_h_halve = 0;
- go->encoder_v_halve = 0;
- go->encoder_subsample = 0;
go->format = V4L2_PIX_FMT_MJPEG;
go->bitrate = 1500000;
go->fps_scale = 1;
- go->pali = 0;
go->aspect_ratio = GO7007_RATIO_1_1;
- go->gop_size = 0;
- go->ipb = 0;
- go->closed_gop = 0;
- go->repeat_seqhead = 0;
- go->seq_header_enable = 0;
- go->gop_header_enable = 0;
- go->dvd_mode = 0;
- go->interlace_coding = 0;
- for (i = 0; i < 4; ++i)
- go->modet[i].enable = 0;
- for (i = 0; i < 1624; ++i)
- go->modet_map[i] = 0;
- go->audio_deliver = NULL;
- go->audio_enabled = 0;
return go;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 055/217] Bluetooth: sco: prevent information leak in sco_conn_defer_accept()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (53 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 054/217] media: go7007: remove redundant initialization Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 056/217] tcp: seq_file: Avoid skipping sk during tcp_seek_last_pos Greg Kroah-Hartman
` (164 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Marcel Holtmann, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 59da0b38bc2ea570ede23a3332ecb3e7574ce6b2 ]
Smatch complains that some of these struct members are not initialized
leading to a stack information disclosure:
net/bluetooth/sco.c:778 sco_conn_defer_accept() warn:
check that 'cp.retrans_effort' doesn't leak information
This seems like a valid warning. I've added a default case to fix
this issue.
Fixes: 2f69a82acf6f ("Bluetooth: Use voice setting in deferred SCO connection request")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/sco.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 2d23b29ce00d..930828ec2afb 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -762,6 +762,11 @@ static void sco_conn_defer_accept(struct hci_conn *conn, u16 setting)
cp.max_latency = cpu_to_le16(0xffff);
cp.retrans_effort = 0xff;
break;
+ default:
+ /* use CVSD settings as fallback */
+ cp.max_latency = cpu_to_le16(0xffff);
+ cp.retrans_effort = 0xff;
+ break;
}
hci_send_cmd(hdev, HCI_OP_ACCEPT_SYNC_CONN_REQ,
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 056/217] tcp: seq_file: Avoid skipping sk during tcp_seek_last_pos
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (54 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 055/217] Bluetooth: sco: prevent information leak in sco_conn_defer_accept() Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 057/217] net: cipso: fix warnings in netlbl_cipsov4_add_std Greg Kroah-Hartman
` (163 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Martin KaFai Lau, Andrii Nakryiko,
Eric Dumazet, Kuniyuki Iwashima, Yonghong Song, Sasha Levin
From: Martin KaFai Lau <kafai@fb.com>
[ Upstream commit 525e2f9fd0229eb10cb460a9e6d978257f24804e ]
st->bucket stores the current bucket number.
st->offset stores the offset within this bucket that is the sk to be
seq_show(). Thus, st->offset only makes sense within the same
st->bucket.
These two variables are an optimization for the common no-lseek case.
When resuming the seq_file iteration (i.e. seq_start()),
tcp_seek_last_pos() tries to continue from the st->offset
at bucket st->bucket.
However, it is possible that the bucket pointed by st->bucket
has changed and st->offset may end up skipping the whole st->bucket
without finding a sk. In this case, tcp_seek_last_pos() currently
continues to satisfy the offset condition in the next (and incorrect)
bucket. Instead, regardless of the offset value, the first sk of the
next bucket should be returned. Thus, "bucket == st->bucket" check is
added to tcp_seek_last_pos().
The chance of hitting this is small and the issue is a decade old,
so targeting for the next tree.
Fixes: a8b690f98baf ("tcp: Fix slowness in read /proc/net/tcp")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210701200541.1033917-1-kafai@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/tcp_ipv4.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 146a137ee7ef..744479c8b91f 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -2087,6 +2087,7 @@ static void *tcp_get_idx(struct seq_file *seq, loff_t pos)
static void *tcp_seek_last_pos(struct seq_file *seq)
{
struct tcp_iter_state *st = seq->private;
+ int bucket = st->bucket;
int offset = st->offset;
int orig_num = st->num;
void *rc = NULL;
@@ -2097,7 +2098,7 @@ static void *tcp_seek_last_pos(struct seq_file *seq)
break;
st->state = TCP_SEQ_STATE_LISTENING;
rc = listening_get_next(seq, NULL);
- while (offset-- && rc)
+ while (offset-- && rc && bucket == st->bucket)
rc = listening_get_next(seq, rc);
if (rc)
break;
@@ -2108,7 +2109,7 @@ static void *tcp_seek_last_pos(struct seq_file *seq)
if (st->bucket > tcp_hashinfo.ehash_mask)
break;
rc = established_get_first(seq);
- while (offset-- && rc)
+ while (offset-- && rc && bucket == st->bucket)
rc = established_get_next(seq, rc);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 057/217] net: cipso: fix warnings in netlbl_cipsov4_add_std
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (55 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 056/217] tcp: seq_file: Avoid skipping sk during tcp_seek_last_pos Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 058/217] i2c: highlander: add IRQ check Greg Kroah-Hartman
` (162 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paul Moore, Pavel Skripkin,
David S. Miller, Sasha Levin, syzbot+cdd51ee2e6b0b2e18c0d
From: Pavel Skripkin <paskripkin@gmail.com>
[ Upstream commit 8ca34a13f7f9b3fa2c464160ffe8cc1a72088204 ]
Syzbot reported warning in netlbl_cipsov4_add(). The
problem was in too big doi_def->map.std->lvl.local_size
passed to kcalloc(). Since this value comes from userpace there is
no need to warn if value is not correct.
The same problem may occur with other kcalloc() calls in
this function, so, I've added __GFP_NOWARN flag to all
kcalloc() calls there.
Reported-and-tested-by: syzbot+cdd51ee2e6b0b2e18c0d@syzkaller.appspotmail.com
Fixes: 96cb8e3313c7 ("[NetLabel]: CIPSOv4 and Unlabeled packet integration")
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netlabel/netlabel_cipso_v4.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/net/netlabel/netlabel_cipso_v4.c b/net/netlabel/netlabel_cipso_v4.c
index 3e3494c8d42f..0559d442ad80 100644
--- a/net/netlabel/netlabel_cipso_v4.c
+++ b/net/netlabel/netlabel_cipso_v4.c
@@ -198,14 +198,14 @@ static int netlbl_cipsov4_add_std(struct genl_info *info,
}
doi_def->map.std->lvl.local = kcalloc(doi_def->map.std->lvl.local_size,
sizeof(u32),
- GFP_KERNEL);
+ GFP_KERNEL | __GFP_NOWARN);
if (doi_def->map.std->lvl.local == NULL) {
ret_val = -ENOMEM;
goto add_std_failure;
}
doi_def->map.std->lvl.cipso = kcalloc(doi_def->map.std->lvl.cipso_size,
sizeof(u32),
- GFP_KERNEL);
+ GFP_KERNEL | __GFP_NOWARN);
if (doi_def->map.std->lvl.cipso == NULL) {
ret_val = -ENOMEM;
goto add_std_failure;
@@ -273,7 +273,7 @@ static int netlbl_cipsov4_add_std(struct genl_info *info,
doi_def->map.std->cat.local = kcalloc(
doi_def->map.std->cat.local_size,
sizeof(u32),
- GFP_KERNEL);
+ GFP_KERNEL | __GFP_NOWARN);
if (doi_def->map.std->cat.local == NULL) {
ret_val = -ENOMEM;
goto add_std_failure;
@@ -281,7 +281,7 @@ static int netlbl_cipsov4_add_std(struct genl_info *info,
doi_def->map.std->cat.cipso = kcalloc(
doi_def->map.std->cat.cipso_size,
sizeof(u32),
- GFP_KERNEL);
+ GFP_KERNEL | __GFP_NOWARN);
if (doi_def->map.std->cat.cipso == NULL) {
ret_val = -ENOMEM;
goto add_std_failure;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 058/217] i2c: highlander: add IRQ check
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (56 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 057/217] net: cipso: fix warnings in netlbl_cipsov4_add_std Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 059/217] media: em28xx-input: fix refcount bug in em28xx_usb_disconnect Greg Kroah-Hartman
` (161 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Wolfram Sang, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omp.ru>
[ Upstream commit f16a3bb69aa6baabf8f0aca982c8cf21e2a4f6bc ]
The driver is written as if platform_get_irq() returns 0 on errors (while
actually it returns a negative error code), blithely passing these error
codes to request_irq() (which takes *unsigned* IRQ #) -- which fails with
-EINVAL. Add the necessary error check to the pre-existing *if* statement
forcing the driver into the polling mode...
Fixes: 4ad48e6ab18c ("i2c: Renesas Highlander FPGA SMBus support")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-highlander.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c
index 56dc69e7349f..9ad031ea3300 100644
--- a/drivers/i2c/busses/i2c-highlander.c
+++ b/drivers/i2c/busses/i2c-highlander.c
@@ -382,7 +382,7 @@ static int highlander_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dev);
dev->irq = platform_get_irq(pdev, 0);
- if (iic_force_poll)
+ if (dev->irq < 0 || iic_force_poll)
dev->irq = 0;
if (dev->irq) {
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 059/217] media: em28xx-input: fix refcount bug in em28xx_usb_disconnect
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (57 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 058/217] i2c: highlander: add IRQ check Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 060/217] PCI: PM: Avoid forcing PCI_D0 for wakeup reasons inconsistently Greg Kroah-Hartman
` (160 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dongliang Mu, Sean Young,
Mauro Carvalho Chehab, Sasha Levin
From: Dongliang Mu <mudongliangabcd@gmail.com>
[ Upstream commit 6fa54bc713c262e1cfbc5613377ef52280d7311f ]
If em28xx_ir_init fails, it would decrease the refcount of dev. However,
in the em28xx_ir_fini, when ir is NULL, it goes to ref_put and decrease
the refcount of dev. This will lead to a refcount bug.
Fix this bug by removing the kref_put in the error handling code
of em28xx_ir_init.
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 7 at lib/refcount.c:28 refcount_warn_saturate+0x18e/0x1a0 lib/refcount.c:28
Modules linked in:
CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.13.0 #3
Workqueue: usb_hub_wq hub_event
RIP: 0010:refcount_warn_saturate+0x18e/0x1a0 lib/refcount.c:28
Call Trace:
kref_put.constprop.0+0x60/0x85 include/linux/kref.h:69
em28xx_usb_disconnect.cold+0xd7/0xdc drivers/media/usb/em28xx/em28xx-cards.c:4150
usb_unbind_interface+0xbf/0x3a0 drivers/usb/core/driver.c:458
__device_release_driver drivers/base/dd.c:1201 [inline]
device_release_driver_internal+0x22a/0x230 drivers/base/dd.c:1232
bus_remove_device+0x108/0x160 drivers/base/bus.c:529
device_del+0x1fe/0x510 drivers/base/core.c:3540
usb_disable_device+0xd1/0x1d0 drivers/usb/core/message.c:1419
usb_disconnect+0x109/0x330 drivers/usb/core/hub.c:2221
hub_port_connect drivers/usb/core/hub.c:5151 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5440 [inline]
port_event drivers/usb/core/hub.c:5586 [inline]
hub_event+0xf81/0x1d40 drivers/usb/core/hub.c:5668
process_one_work+0x2c9/0x610 kernel/workqueue.c:2276
process_scheduled_works kernel/workqueue.c:2338 [inline]
worker_thread+0x333/0x5b0 kernel/workqueue.c:2424
kthread+0x188/0x1d0 kernel/kthread.c:319
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
Reported-by: Dongliang Mu <mudongliangabcd@gmail.com>
Fixes: ac5688637144 ("media: em28xx: Fix possible memory leak of em28xx struct")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/usb/em28xx/em28xx-input.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/media/usb/em28xx/em28xx-input.c b/drivers/media/usb/em28xx/em28xx-input.c
index b8c94b4ad232..0be2fb751705 100644
--- a/drivers/media/usb/em28xx/em28xx-input.c
+++ b/drivers/media/usb/em28xx/em28xx-input.c
@@ -839,7 +839,6 @@ error:
kfree(ir);
ref_put:
em28xx_shutdown_buttons(dev);
- kref_put(&dev->ref, em28xx_free_device);
return err;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 060/217] PCI: PM: Avoid forcing PCI_D0 for wakeup reasons inconsistently
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (58 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 059/217] media: em28xx-input: fix refcount bug in em28xx_usb_disconnect Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 061/217] PCI: PM: Enable PME if it can be signaled from D3cold Greg Kroah-Hartman
` (159 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mika Westerberg, Utkarsh H Patel,
Koba Ko, Rafael J. Wysocki, Sasha Levin
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ Upstream commit da9f2150684ea684a7ddd6d7f0e38b2bdf43dcd8 ]
It is inconsistent to return PCI_D0 from pci_target_state() instead
of the original target state if 'wakeup' is true and the device
cannot signal PME from D0.
This only happens when the device cannot signal PME from the original
target state and any shallower power states (including D0) and that
case is effectively equivalent to the one in which PME singaling is
not supported at all. Since the original target state is returned in
the latter case, make the function do that in the former one too.
Link: https://lore.kernel.org/linux-pm/3149540.aeNJFYEL58@kreacher/
Fixes: 666ff6f83e1d ("PCI/PM: Avoid using device_may_wakeup() for runtime PM")
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-by: Utkarsh H Patel <utkarsh.h.patel@intel.com>
Reported-by: Koba Ko <koba.ko@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/pci.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index c847b5554db6..ac2c9d0c02fe 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2054,17 +2054,21 @@ static pci_power_t pci_target_state(struct pci_dev *dev, bool wakeup)
if (dev->current_state == PCI_D3cold)
target_state = PCI_D3cold;
- if (wakeup) {
+ if (wakeup && dev->pme_support) {
+ pci_power_t state = target_state;
+
/*
* Find the deepest state from which the device can generate
* wake-up events, make it the target state and enable device
* to generate PME#.
*/
- if (dev->pme_support) {
- while (target_state
- && !(dev->pme_support & (1 << target_state)))
- target_state--;
- }
+ while (state && !(dev->pme_support & (1 << state)))
+ state--;
+
+ if (state)
+ return state;
+ else if (dev->pme_support & 1)
+ return PCI_D0;
}
return target_state;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 061/217] PCI: PM: Enable PME if it can be signaled from D3cold
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (59 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 060/217] PCI: PM: Avoid forcing PCI_D0 for wakeup reasons inconsistently Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 062/217] soc: qcom: smsm: Fix missed interrupts if state changes while masked Greg Kroah-Hartman
` (158 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mika Westerberg, Utkarsh H Patel,
Koba Ko, Rafael J. Wysocki, Sasha Levin
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ Upstream commit 0e00392a895c95c6d12d42158236c8862a2f43f2 ]
PME signaling is only enabled by __pci_enable_wake() if the target
device can signal PME from the given target power state (to avoid
pointless reconfiguration of the device), but if the hierarchy above
the device goes into D3cold, the device itself will end up in D3cold
too, so if it can signal PME from D3cold, it should be enabled to
do so in __pci_enable_wake().
[Note that if the device does not end up in D3cold and it cannot
signal PME from the original target power state, it will not signal
PME, so in that case the behavior does not change.]
Link: https://lore.kernel.org/linux-pm/3149540.aeNJFYEL58@kreacher/
Fixes: 5bcc2fb4e815 ("PCI PM: Simplify PCI wake-up code")
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-by: Utkarsh H Patel <utkarsh.h.patel@intel.com>
Reported-by: Koba Ko <koba.ko@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/pci.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index ac2c9d0c02fe..1c5c0937c5da 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1950,7 +1950,14 @@ static int __pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable
if (enable) {
int error;
- if (pci_pme_capable(dev, state))
+ /*
+ * Enable PME signaling if the device can signal PME from
+ * D3cold regardless of whether or not it can signal PME from
+ * the current target state, because that will allow it to
+ * signal PME when the hierarchy above it goes into D3cold and
+ * the device itself ends up in D3cold as a result of that.
+ */
+ if (pci_pme_capable(dev, state) || pci_pme_capable(dev, PCI_D3cold))
pci_pme_active(dev, true);
else
ret = 1;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 062/217] soc: qcom: smsm: Fix missed interrupts if state changes while masked
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (60 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 061/217] PCI: PM: Enable PME if it can be signaled from D3cold Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 063/217] Bluetooth: increase BTNAMSIZ to 21 chars to fix potential buffer overflow Greg Kroah-Hartman
` (157 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stephan Gerhold, Bjorn Andersson,
Sasha Levin
From: Stephan Gerhold <stephan@gerhold.net>
[ Upstream commit e3d4571955050736bbf3eda0a9538a09d9fcfce8 ]
The SMSM driver detects interrupt edges by tracking the last state
it has seen (and has triggered the interrupt handler for). This works
fine, but only if the interrupt does not change state while masked.
For example, if an interrupt is unmasked while the state is HIGH,
the stored last_value for that interrupt might still be LOW. Then,
when the remote processor triggers smsm_intr() we assume that nothing
has changed, even though the state might have changed from HIGH to LOW.
Attempt to fix this by checking the current remote state before
unmasking an IRQ. Use atomic operations to avoid the interrupt handler
from interfering with the unmask function.
This fixes modem crashes in some edge cases with the BAM-DMUX driver.
Specifically, the BAM-DMUX interrupt handler is not called for the
HIGH -> LOW smsm state transition if the BAM-DMUX driver is loaded
(and therefore unmasks the interrupt) after the modem was already started:
qcom-q6v5-mss 4080000.remoteproc: fatal error received: a2_task.c:3188:
Assert FALSE failed: A2 DL PER deadlock timer expired waiting for Apps ACK
Fixes: c97c4090ff72 ("soc: qcom: smsm: Add driver for Qualcomm SMSM")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210712135703.324748-2-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/qcom/smsm.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/soc/qcom/smsm.c b/drivers/soc/qcom/smsm.c
index 50214b620865..2b49d2c212da 100644
--- a/drivers/soc/qcom/smsm.c
+++ b/drivers/soc/qcom/smsm.c
@@ -117,7 +117,7 @@ struct smsm_entry {
DECLARE_BITMAP(irq_enabled, 32);
DECLARE_BITMAP(irq_rising, 32);
DECLARE_BITMAP(irq_falling, 32);
- u32 last_value;
+ unsigned long last_value;
u32 *remote_state;
u32 *subscription;
@@ -212,8 +212,7 @@ static irqreturn_t smsm_intr(int irq, void *data)
u32 val;
val = readl(entry->remote_state);
- changed = val ^ entry->last_value;
- entry->last_value = val;
+ changed = val ^ xchg(&entry->last_value, val);
for_each_set_bit(i, entry->irq_enabled, 32) {
if (!(changed & BIT(i)))
@@ -274,6 +273,12 @@ static void smsm_unmask_irq(struct irq_data *irqd)
struct qcom_smsm *smsm = entry->smsm;
u32 val;
+ /* Make sure our last cached state is up-to-date */
+ if (readl(entry->remote_state) & BIT(irq))
+ set_bit(irq, &entry->last_value);
+ else
+ clear_bit(irq, &entry->last_value);
+
set_bit(irq, entry->irq_enabled);
if (entry->subscription) {
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 063/217] Bluetooth: increase BTNAMSIZ to 21 chars to fix potential buffer overflow
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (61 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 062/217] soc: qcom: smsm: Fix missed interrupts if state changes while masked Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 064/217] arm64: dts: exynos: correct GIC CPU interfaces address range on Exynos7 Greg Kroah-Hartman
` (156 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King, Marcel Holtmann, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit 713baf3dae8f45dc8ada4ed2f5fdcbf94a5c274d ]
An earlier commit replaced using batostr to using %pMR sprintf for the
construction of session->name. Static analysis detected that this new
method can use a total of 21 characters (including the trailing '\0')
so we need to increase the BTNAMSIZ from 18 to 21 to fix potential
buffer overflows.
Addresses-Coverity: ("Out-of-bounds write")
Fixes: fcb73338ed53 ("Bluetooth: Use %pMR in sprintf/seq_printf instead of batostr")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/cmtp/cmtp.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/bluetooth/cmtp/cmtp.h b/net/bluetooth/cmtp/cmtp.h
index c32638dddbf9..f6b9dc4e408f 100644
--- a/net/bluetooth/cmtp/cmtp.h
+++ b/net/bluetooth/cmtp/cmtp.h
@@ -26,7 +26,7 @@
#include <linux/types.h>
#include <net/bluetooth/bluetooth.h>
-#define BTNAMSIZ 18
+#define BTNAMSIZ 21
/* CMTP ioctl defines */
#define CMTPCONNADD _IOW('C', 200, int)
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 064/217] arm64: dts: exynos: correct GIC CPU interfaces address range on Exynos7
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (62 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 063/217] Bluetooth: increase BTNAMSIZ to 21 chars to fix potential buffer overflow Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 065/217] Bluetooth: fix repeated calls to sco_sock_kill Greg Kroah-Hartman
` (155 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sam Protsenko, Marc Zyngier,
Krzysztof Kozlowski, Alim Akhtar, Sasha Levin
From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
[ Upstream commit 01c72cad790cb6cd3ccbe4c1402b6cb6c6bbffd0 ]
The GIC-400 CPU interfaces address range is defined as 0x2000-0x3FFF (by
ARM).
Reported-by: Sam Protsenko <semen.protsenko@linaro.org>
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Fixes: b9024cbc937d ("arm64: dts: Add initial device tree support for exynos7")
Link: https://lore.kernel.org/r/20210805072110.4730-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/exynos/exynos7.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 875297a470da..331dcf94acf0 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -94,7 +94,7 @@
#address-cells = <0>;
interrupt-controller;
reg = <0x11001000 0x1000>,
- <0x11002000 0x1000>,
+ <0x11002000 0x2000>,
<0x11004000 0x2000>,
<0x11006000 0x2000>;
};
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 065/217] Bluetooth: fix repeated calls to sco_sock_kill
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (63 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 064/217] arm64: dts: exynos: correct GIC CPU interfaces address range on Exynos7 Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 066/217] drm/msm/dsi: Fix some reference counted resource leaks Greg Kroah-Hartman
` (154 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Desmond Cheong Zhi Xi,
Luiz Augusto von Dentz, Sasha Levin
From: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
[ Upstream commit e1dee2c1de2b4dd00eb44004a4bda6326ed07b59 ]
In commit 4e1a720d0312 ("Bluetooth: avoid killing an already killed
socket"), a check was added to sco_sock_kill to skip killing a socket
if the SOCK_DEAD flag was set.
This was done after a trace for a use-after-free bug showed that the
same sock pointer was being killed twice.
Unfortunately, this check prevents sco_sock_kill from running on any
socket. sco_sock_kill kills a socket only if it's zapped and orphaned,
however sock_orphan announces that the socket is dead before detaching
it. i.e., orphaned sockets have the SOCK_DEAD flag set.
To fix this, we remove the check for SOCK_DEAD, and avoid repeated
calls to sco_sock_kill by removing incorrect calls in:
1. sco_sock_timeout. The socket should not be killed on timeout as
further processing is expected to be done. For example,
sco_sock_connect sets the timer then waits for the socket to be
connected or for an error to be returned.
2. sco_conn_del. This function should clean up resources for the
connection, but the socket itself should be cleaned up in
sco_sock_release.
3. sco_sock_close. Calls to sco_sock_close in sco_sock_cleanup_listen
and sco_sock_release are followed by sco_sock_kill. Hence the
duplicated call should be removed.
Fixes: 4e1a720d0312 ("Bluetooth: avoid killing an already killed socket")
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/sco.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 930828ec2afb..f4b997fb33d6 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -84,7 +84,6 @@ static void sco_sock_timeout(unsigned long arg)
sk->sk_state_change(sk);
bh_unlock_sock(sk);
- sco_sock_kill(sk);
sock_put(sk);
}
@@ -176,7 +175,6 @@ static void sco_conn_del(struct hci_conn *hcon, int err)
sco_sock_clear_timer(sk);
sco_chan_del(sk, err);
bh_unlock_sock(sk);
- sco_sock_kill(sk);
sock_put(sk);
}
@@ -393,8 +391,7 @@ static void sco_sock_cleanup_listen(struct sock *parent)
*/
static void sco_sock_kill(struct sock *sk)
{
- if (!sock_flag(sk, SOCK_ZAPPED) || sk->sk_socket ||
- sock_flag(sk, SOCK_DEAD))
+ if (!sock_flag(sk, SOCK_ZAPPED) || sk->sk_socket)
return;
BT_DBG("sk %p state %d", sk, sk->sk_state);
@@ -446,7 +443,6 @@ static void sco_sock_close(struct sock *sk)
lock_sock(sk);
__sco_sock_close(sk);
release_sock(sk);
- sco_sock_kill(sk);
}
static void sco_sock_init(struct sock *sk, struct sock *parent)
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 066/217] drm/msm/dsi: Fix some reference counted resource leaks
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (64 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 065/217] Bluetooth: fix repeated calls to sco_sock_kill Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 067/217] usb: gadget: udc: at91: add IRQ check Greg Kroah-Hartman
` (153 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe JAILLET, Rob Clark, Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit 6977cc89c87506ff17e6c05f0e37f46752256e82 ]
'of_find_device_by_node()' takes a reference that must be released when
not needed anymore.
This is expected to be done in 'dsi_destroy()'.
However, there are 2 issues in 'dsi_get_phy()'.
First, if 'of_find_device_by_node()' succeeds but 'platform_get_drvdata()'
returns NULL, 'msm_dsi->phy_dev' will still be NULL, and the reference
won't be released in 'dsi_destroy()'.
Secondly, as 'of_find_device_by_node()' already takes a reference, there is
no need for an additional 'get_device()'.
Move the assignment to 'msm_dsi->phy_dev' a few lines above and remove the
unneeded 'get_device()' to solve both issues.
Fixes: ec31abf6684e ("drm/msm/dsi: Separate PHY to another platform device")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/f15bc57648a00e7c99f943903468a04639d50596.1628241097.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/dsi/dsi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/dsi.c b/drivers/gpu/drm/msm/dsi/dsi.c
index 98742d7af6dc..bacb33eec0fa 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.c
+++ b/drivers/gpu/drm/msm/dsi/dsi.c
@@ -34,8 +34,10 @@ static int dsi_get_phy(struct msm_dsi *msm_dsi)
}
phy_pdev = of_find_device_by_node(phy_node);
- if (phy_pdev)
+ if (phy_pdev) {
msm_dsi->phy = platform_get_drvdata(phy_pdev);
+ msm_dsi->phy_dev = &phy_pdev->dev;
+ }
of_node_put(phy_node);
@@ -44,8 +46,6 @@ static int dsi_get_phy(struct msm_dsi *msm_dsi)
return -EPROBE_DEFER;
}
- msm_dsi->phy_dev = get_device(&phy_pdev->dev);
-
return 0;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 067/217] usb: gadget: udc: at91: add IRQ check
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (65 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 066/217] drm/msm/dsi: Fix some reference counted resource leaks Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 068/217] usb: phy: fsl-usb: " Greg Kroah-Hartman
` (152 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Felipe Balbi, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omp.ru>
[ Upstream commit 50855c31573b02963f0aa2aacfd4ea41c31ae0e0 ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original
error code. Stop calling devm_request_irq() with the invalid IRQ #s.
Fixes: 8b2e76687b39 ("USB: AT91 UDC updates, mostly power management")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Felipe Balbi <balbi@kernel.org>
Link: https://lore.kernel.org/r/6654a224-739a-1a80-12f0-76d920f87b6c@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/at91_udc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c
index 8bc78418d40e..cd92cda03d71 100644
--- a/drivers/usb/gadget/udc/at91_udc.c
+++ b/drivers/usb/gadget/udc/at91_udc.c
@@ -1895,7 +1895,9 @@ static int at91udc_probe(struct platform_device *pdev)
clk_disable(udc->iclk);
/* request UDC and maybe VBUS irqs */
- udc->udp_irq = platform_get_irq(pdev, 0);
+ udc->udp_irq = retval = platform_get_irq(pdev, 0);
+ if (retval < 0)
+ goto err_unprepare_iclk;
retval = devm_request_irq(dev, udc->udp_irq, at91_udc_irq, 0,
driver_name, udc);
if (retval) {
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 068/217] usb: phy: fsl-usb: add IRQ check
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (66 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 067/217] usb: gadget: udc: at91: add IRQ check Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 069/217] usb: phy: twl6030: add IRQ checks Greg Kroah-Hartman
` (151 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Felipe Balbi, Sergey Shtylyov, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omp.ru>
[ Upstream commit ecc2f30dbb25969908115c81ec23650ed982b004 ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original
error code. Stop calling request_irq() with the invalid IRQ #s.
Fixes: 0807c500a1a6 ("USB: add Freescale USB OTG Transceiver driver")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/b0a86089-8b8b-122e-fd6d-73e8c2304964@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/phy/phy-fsl-usb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index 9b4354a00ca7..968900c36451 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -886,6 +886,8 @@ int usb_otg_start(struct platform_device *pdev)
/* request irq */
p_otg->irq = platform_get_irq(pdev, 0);
+ if (p_otg->irq < 0)
+ return p_otg->irq;
status = request_irq(p_otg->irq, fsl_otg_isr,
IRQF_SHARED, driver_name, p_otg);
if (status) {
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 069/217] usb: phy: twl6030: add IRQ checks
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (67 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 068/217] usb: phy: fsl-usb: " Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 070/217] Bluetooth: Move shutdown callback before flushing tx and rx queue Greg Kroah-Hartman
` (150 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Felipe Balbi, Sergey Shtylyov, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omp.ru>
[ Upstream commit 0881e22c06e66af0b64773c91c8868ead3d01aa1 ]
The driver neglects to check the result of platform_get_irq()'s calls and
blithely passes the negative error codes to request_threaded_irq() (which
takes *unsigned* IRQ #), causing them both to fail with -EINVAL, overriding
an original error code. Stop calling request_threaded_irq() with the
invalid IRQ #s.
Fixes: c33fad0c3748 ("usb: otg: Adding twl6030-usb transceiver driver for OMAP4430")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/9507f50b-50f1-6dc4-f57c-3ed4e53a1c25@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/phy/phy-twl6030-usb.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
index 8e14fa221191..4884c4238b7b 100644
--- a/drivers/usb/phy/phy-twl6030-usb.c
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -355,6 +355,11 @@ static int twl6030_usb_probe(struct platform_device *pdev)
twl->irq2 = platform_get_irq(pdev, 1);
twl->linkstat = MUSB_UNKNOWN;
+ if (twl->irq1 < 0)
+ return twl->irq1;
+ if (twl->irq2 < 0)
+ return twl->irq2;
+
twl->comparator.set_vbus = twl6030_set_vbus;
twl->comparator.start_srp = twl6030_start_srp;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 070/217] Bluetooth: Move shutdown callback before flushing tx and rx queue
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (68 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 069/217] usb: phy: twl6030: add IRQ checks Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 071/217] usb: host: ohci-tmio: add IRQ check Greg Kroah-Hartman
` (149 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hsin-Yi Wang, Guenter Roeck,
Kai-Heng Feng, Marcel Holtmann, Sasha Levin, Mattijs Korpershoek
From: Kai-Heng Feng <kai.heng.feng@canonical.com>
[ Upstream commit 0ea53674d07fb6db2dd7a7ec2fdc85a12eb246c2 ]
Commit 0ea9fd001a14 ("Bluetooth: Shutdown controller after workqueues
are flushed or cancelled") introduced a regression that makes mtkbtsdio
driver stops working:
[ 36.593956] Bluetooth: hci0: Firmware already downloaded
[ 46.814613] Bluetooth: hci0: Execution of wmt command timed out
[ 46.814619] Bluetooth: hci0: Failed to send wmt func ctrl (-110)
The shutdown callback depends on the result of hdev->rx_work, so we
should call it before flushing rx_work:
-> btmtksdio_shutdown()
-> mtk_hci_wmt_sync()
-> __hci_cmd_send()
-> wait for BTMTKSDIO_TX_WAIT_VND_EVT gets cleared
-> btmtksdio_recv_event()
-> hci_recv_frame()
-> queue_work(hdev->workqueue, &hdev->rx_work)
-> clears BTMTKSDIO_TX_WAIT_VND_EVT
So move the shutdown callback before flushing TX/RX queue to resolve the
issue.
Reported-and-tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Fixes: 0ea9fd001a14 ("Bluetooth: Shutdown controller after workqueues are flushed or cancelled")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/hci_core.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 3b2dd98e9fd6..89f4b9fc9bcc 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1582,6 +1582,14 @@ int hci_dev_do_close(struct hci_dev *hdev)
hci_request_cancel_all(hdev);
hci_req_sync_lock(hdev);
+ if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) &&
+ !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
+ test_bit(HCI_UP, &hdev->flags)) {
+ /* Execute vendor specific shutdown routine */
+ if (hdev->shutdown)
+ hdev->shutdown(hdev);
+ }
+
if (!test_and_clear_bit(HCI_UP, &hdev->flags)) {
cancel_delayed_work_sync(&hdev->cmd_timer);
hci_req_sync_unlock(hdev);
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 071/217] usb: host: ohci-tmio: add IRQ check
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (69 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 070/217] Bluetooth: Move shutdown callback before flushing tx and rx queue Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 072/217] usb: phy: tahvo: " Greg Kroah-Hartman
` (148 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alan Stern, Sergey Shtylyov, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omp.ru>
[ Upstream commit 4ac5132e8a4300637a2da8f5d6bc7650db735b8a ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to usb_add_hcd() (which takes
*unsigned* IRQ #), causing request_irq() that it calls to fail with
-EINVAL, overriding an original error code. Stop calling usb_add_hcd()
with the invalid IRQ #s.
Fixes: 78c73414f4f6 ("USB: ohci: add support for tmio-ohci cell")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/402e1a45-a0a4-0e08-566a-7ca1331506b1@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/host/ohci-tmio.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index 16d081a093bb..0cf4b6dc8972 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -202,6 +202,9 @@ static int ohci_hcd_tmio_drv_probe(struct platform_device *dev)
if (!cell)
return -EINVAL;
+ if (irq < 0)
+ return irq;
+
hcd = usb_create_hcd(&ohci_tmio_hc_driver, &dev->dev, dev_name(&dev->dev));
if (!hcd) {
ret = -ENOMEM;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 072/217] usb: phy: tahvo: add IRQ check
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (70 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 071/217] usb: host: ohci-tmio: add IRQ check Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 073/217] mac80211: Fix insufficient headroom issue for AMSDU Greg Kroah-Hartman
` (147 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Felipe Balbi, Sergey Shtylyov, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omp.ru>
[ Upstream commit 0d45a1373e669880b8beaecc8765f44cb0241e47 ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_threaded_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an
original error code. Stop calling request_threaded_irq() with the invalid
IRQ #s.
Fixes: 9ba96ae5074c ("usb: omap1: Tahvo USB transceiver driver")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/8280d6a4-8e9a-7cfe-1aa9-db586dc9afdf@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/phy/phy-tahvo.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c
index 1ec00eae339a..e4fc73bf6ee9 100644
--- a/drivers/usb/phy/phy-tahvo.c
+++ b/drivers/usb/phy/phy-tahvo.c
@@ -404,7 +404,9 @@ static int tahvo_usb_probe(struct platform_device *pdev)
dev_set_drvdata(&pdev->dev, tu);
- tu->irq = platform_get_irq(pdev, 0);
+ tu->irq = ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ return ret;
ret = request_threaded_irq(tu->irq, NULL, tahvo_usb_vbus_interrupt,
IRQF_ONESHOT,
"tahvo-vbus", tu);
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 073/217] mac80211: Fix insufficient headroom issue for AMSDU
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (71 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 072/217] usb: phy: tahvo: " Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 074/217] usb: gadget: mv_u3d: request_irq() after initializing UDC Greg Kroah-Hartman
` (146 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chih-Kang Chang, Ping-Ke Shih,
Johannes Berg, Sasha Levin
From: Chih-Kang Chang <gary.chang@realtek.com>
[ Upstream commit f50d2ff8f016b79a2ff4acd5943a1eda40c545d4 ]
ieee80211_amsdu_realloc_pad() fails to account for extra_tx_headroom,
the original reserved headroom might be eaten. Add the necessary
extra_tx_headroom.
Fixes: 6e0456b54545 ("mac80211: add A-MSDU tx support")
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20210816085128.10931-2-pkshih@realtek.com
[fix indentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/mac80211/tx.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index c7e8935224c0..e7b63ba8c184 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -3080,7 +3080,9 @@ static bool ieee80211_amsdu_prepare_head(struct ieee80211_sub_if_data *sdata,
if (info->control.flags & IEEE80211_TX_CTRL_AMSDU)
return true;
- if (!ieee80211_amsdu_realloc_pad(local, skb, sizeof(*amsdu_hdr)))
+ if (!ieee80211_amsdu_realloc_pad(local, skb,
+ sizeof(*amsdu_hdr) +
+ local->hw.extra_tx_headroom))
return false;
data = skb_push(skb, sizeof(*amsdu_hdr));
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 074/217] usb: gadget: mv_u3d: request_irq() after initializing UDC
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (72 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 073/217] mac80211: Fix insufficient headroom issue for AMSDU Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 075/217] Bluetooth: add timeout sanity check to hci_inquiry Greg Kroah-Hartman
` (145 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Felipe Balbi, Nadezda Lutovinova,
Sasha Levin
From: Nadezda Lutovinova <lutovinova@ispras.ru>
[ Upstream commit 2af0c5ffadaf9d13eca28409d4238b4e672942d3 ]
If IRQ occurs between calling request_irq() and mv_u3d_eps_init(),
then null pointer dereference occurs since u3d->eps[] wasn't
initialized yet but used in mv_u3d_nuke().
The patch puts registration of the interrupt handler after
initializing of neccesery data.
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: 90fccb529d24 ("usb: gadget: Gadget directory cleanup - group UDC drivers")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210818141247.4794-1-lutovinova@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/mv_u3d_core.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/gadget/udc/mv_u3d_core.c b/drivers/usb/gadget/udc/mv_u3d_core.c
index 772049afe166..83c6c776a371 100644
--- a/drivers/usb/gadget/udc/mv_u3d_core.c
+++ b/drivers/usb/gadget/udc/mv_u3d_core.c
@@ -1925,14 +1925,6 @@ static int mv_u3d_probe(struct platform_device *dev)
goto err_get_irq;
}
u3d->irq = r->start;
- if (request_irq(u3d->irq, mv_u3d_irq,
- IRQF_SHARED, driver_name, u3d)) {
- u3d->irq = 0;
- dev_err(&dev->dev, "Request irq %d for u3d failed\n",
- u3d->irq);
- retval = -ENODEV;
- goto err_request_irq;
- }
/* initialize gadget structure */
u3d->gadget.ops = &mv_u3d_ops; /* usb_gadget_ops */
@@ -1945,6 +1937,15 @@ static int mv_u3d_probe(struct platform_device *dev)
mv_u3d_eps_init(u3d);
+ if (request_irq(u3d->irq, mv_u3d_irq,
+ IRQF_SHARED, driver_name, u3d)) {
+ u3d->irq = 0;
+ dev_err(&dev->dev, "Request irq %d for u3d failed\n",
+ u3d->irq);
+ retval = -ENODEV;
+ goto err_request_irq;
+ }
+
/* external vbus detection */
if (u3d->vbus) {
u3d->clock_gating = 1;
@@ -1968,8 +1969,8 @@ static int mv_u3d_probe(struct platform_device *dev)
err_unregister:
free_irq(u3d->irq, u3d);
-err_request_irq:
err_get_irq:
+err_request_irq:
kfree(u3d->status_req);
err_alloc_status_req:
kfree(u3d->eps);
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 075/217] Bluetooth: add timeout sanity check to hci_inquiry
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (73 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 074/217] usb: gadget: mv_u3d: request_irq() after initializing UDC Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 076/217] i2c: iop3xx: fix deferred probing Greg Kroah-Hartman
` (144 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pavel Skripkin, Marcel Holtmann,
Sasha Levin, syzbot+be2baed593ea56c6a84c
From: Pavel Skripkin <paskripkin@gmail.com>
[ Upstream commit f41a4b2b5eb7872109723dab8ae1603bdd9d9ec1 ]
Syzbot hit "task hung" bug in hci_req_sync(). The problem was in
unreasonable huge inquiry timeout passed from userspace.
Fix it by adding sanity check for timeout value to hci_inquiry().
Since hci_inquiry() is the only user of hci_req_sync() with user
controlled timeout value, it makes sense to check timeout value in
hci_inquiry() and don't touch hci_req_sync().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+be2baed593ea56c6a84c@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/hci_core.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 89f4b9fc9bcc..1906adfd553a 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1258,6 +1258,12 @@ int hci_inquiry(void __user *arg)
goto done;
}
+ /* Restrict maximum inquiry length to 60 seconds */
+ if (ir.length > 60) {
+ err = -EINVAL;
+ goto done;
+ }
+
hci_dev_lock(hdev);
if (inquiry_cache_age(hdev) > INQUIRY_CACHE_AGE_MAX ||
inquiry_cache_empty(hdev) || ir.flags & IREQ_CACHE_FLUSH) {
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 076/217] i2c: iop3xx: fix deferred probing
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (74 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 075/217] Bluetooth: add timeout sanity check to hci_inquiry Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 077/217] i2c: s3c2410: fix IRQ check Greg Kroah-Hartman
` (143 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Wolfram Sang, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omp.ru>
[ Upstream commit a1299505162ad00def3573260c2c68b9c8e8d697 ]
When adding the code to handle platform_get_irq*() errors in the commit
489447380a29 ("handle errors returned by platform_get_irq*()"), the
actual error code was enforced to be -ENXIO in the driver for some
strange reason. This didn't matter much until the deferred probing was
introduced -- which requires an actual error code to be propagated
upstream from the failure site.
While fixing this, also stop overriding the errors from request_irq() to
-EIO (done since the pre-git era).
Fixes: 489447380a29 ("[PATCH] handle errors returned by platform_get_irq*()")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-iop3xx.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 85cbe4b55578..d4fe7ccccb22 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -456,16 +456,14 @@ iop3xx_i2c_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
- ret = -ENXIO;
+ ret = irq;
goto unmap;
}
ret = request_irq(irq, iop3xx_i2c_irq_handler, 0,
pdev->name, adapter_data);
- if (ret) {
- ret = -EIO;
+ if (ret)
goto unmap;
- }
memcpy(new_adapter->name, pdev->name, strlen(pdev->name));
new_adapter->owner = THIS_MODULE;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 077/217] i2c: s3c2410: fix IRQ check
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (75 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 076/217] i2c: iop3xx: fix deferred probing Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 078/217] mmc: dw_mmc: Fix issue with uninitialized dma_slave_config Greg Kroah-Hartman
` (142 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Krzysztof Kozlowski,
Wolfram Sang, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omp.ru>
[ Upstream commit d6840a5e370b7ea4fde16ce2caf431bcc87f9a75 ]
Iff platform_get_irq() returns 0, the driver's probe() method will return 0
early (as if the method's call was successful). Let's consider IRQ0 valid
for simplicity -- devm_request_irq() can always override that decision...
Fixes: e0d1ec97853f ("i2c-s3c2410: Change IRQ to be plain integer.")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-s3c2410.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index de10ca40aebc..911f8628128e 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -1181,7 +1181,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
*/
if (!(i2c->quirks & QUIRK_POLL)) {
i2c->irq = ret = platform_get_irq(pdev, 0);
- if (ret <= 0) {
+ if (ret < 0) {
dev_err(&pdev->dev, "cannot find IRQ\n");
clk_unprepare(i2c->clk);
return ret;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 078/217] mmc: dw_mmc: Fix issue with uninitialized dma_slave_config
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (76 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 077/217] i2c: s3c2410: fix IRQ check Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 079/217] mmc: moxart: " Greg Kroah-Hartman
` (141 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Shawn Lin, Jaehoon Chung,
Peter Ujfalusi, Vinod Koul, Tony Lindgren, Ulf Hansson,
Sasha Levin
From: Tony Lindgren <tony@atomide.com>
[ Upstream commit c3ff0189d3bc9c03845fe37472c140f0fefd0c79 ]
Depending on the DMA driver being used, the struct dma_slave_config may
need to be initialized to zero for the unused data.
For example, we have three DMA drivers using src_port_window_size and
dst_port_window_size. If these are left uninitialized, it can cause DMA
failures.
For dw_mmc, this is probably not currently an issue but is still good to
fix though.
Fixes: 3fc7eaef44db ("mmc: dw_mmc: Add external dma interface support")
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210810081644.19353-2-tony@atomide.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/dw_mmc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index bd994a8fce14..44d317d71b4c 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -832,6 +832,7 @@ static int dw_mci_edmac_start_dma(struct dw_mci *host,
int ret = 0;
/* Set external dma config: burst size, burst width */
+ memset(&cfg, 0, sizeof(cfg));
cfg.dst_addr = host->phy_regs + fifo_offset;
cfg.src_addr = cfg.dst_addr;
cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 079/217] mmc: moxart: Fix issue with uninitialized dma_slave_config
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (77 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 078/217] mmc: dw_mmc: Fix issue with uninitialized dma_slave_config Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 080/217] CIFS: Fix a potencially linear read overflow Greg Kroah-Hartman
` (140 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jonas Jensen, Vinod Koul,
Peter Ujfalusi, Tony Lindgren, Ulf Hansson, Sasha Levin
From: Tony Lindgren <tony@atomide.com>
[ Upstream commit ee5165354d498e5bceb0b386e480ac84c5f8c28c ]
Depending on the DMA driver being used, the struct dma_slave_config may
need to be initialized to zero for the unused data.
For example, we have three DMA drivers using src_port_window_size and
dst_port_window_size. If these are left uninitialized, it can cause DMA
failures.
For moxart, this is probably not currently an issue but is still good to
fix though.
Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver")
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210810081644.19353-3-tony@atomide.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/moxart-mmc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c
index a0670e9cd012..5553a5643f40 100644
--- a/drivers/mmc/host/moxart-mmc.c
+++ b/drivers/mmc/host/moxart-mmc.c
@@ -631,6 +631,7 @@ static int moxart_probe(struct platform_device *pdev)
host->dma_chan_tx, host->dma_chan_rx);
host->have_dma = true;
+ memset(&cfg, 0, sizeof(cfg));
cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 080/217] CIFS: Fix a potencially linear read overflow
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (78 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 079/217] mmc: moxart: " Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 081/217] i2c: mt65xx: fix IRQ check Greg Kroah-Hartman
` (139 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Len Baker, Paulo Alcantara (SUSE),
Jeff Layton, Steve French, Sasha Levin
From: Len Baker <len.baker@gmx.com>
[ Upstream commit f980d055a0f858d73d9467bb0b570721bbfcdfb8 ]
strlcpy() reads the entire source buffer first. This read may exceed the
destination size limit. This is both inefficient and can lead to linear
read overflows if a source string is not NUL-terminated.
Also, the strnlen() call does not avoid the read overflow in the strlcpy
function when a not NUL-terminated string is passed.
So, replace this block by a call to kstrndup() that avoids this type of
overflow and does the same.
Fixes: 066ce6899484d ("cifs: rename cifs_strlcpy_to_host and make it use new functions")
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/cifs/cifs_unicode.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c
index 9986817532b1..7932e20555d2 100644
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -371,14 +371,9 @@ cifs_strndup_from_utf16(const char *src, const int maxlen,
if (!dst)
return NULL;
cifs_from_utf16(dst, (__le16 *) src, len, maxlen, codepage,
- NO_MAP_UNI_RSVD);
+ NO_MAP_UNI_RSVD);
} else {
- len = strnlen(src, maxlen);
- len++;
- dst = kmalloc(len, GFP_KERNEL);
- if (!dst)
- return NULL;
- strlcpy(dst, src, len);
+ dst = kstrndup(src, maxlen, GFP_KERNEL);
}
return dst;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 081/217] i2c: mt65xx: fix IRQ check
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (79 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 080/217] CIFS: Fix a potencially linear read overflow Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 082/217] usb: ehci-orion: Handle errors of clk_prepare_enable() in probe Greg Kroah-Hartman
` (138 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Qii Wang,
Wolfram Sang, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omp.ru>
[ Upstream commit 58fb7c643d346e2364404554f531cfa6a1a3917c ]
Iff platform_get_irq() returns 0, the driver's probe() method will return 0
early (as if the method's call was successful). Let's consider IRQ0 valid
for simplicity -- devm_request_irq() can always override that decision...
Fixes: ce38815d39ea ("I2C: mediatek: Add driver for MediaTek I2C controller")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-mt65xx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 09d288ce0ddb..cbcf76ea9c19 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -740,7 +740,7 @@ static int mtk_i2c_probe(struct platform_device *pdev)
return PTR_ERR(i2c->pdmabase);
irq = platform_get_irq(pdev, 0);
- if (irq <= 0)
+ if (irq < 0)
return irq;
init_completion(&i2c->msg_complete);
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 082/217] usb: ehci-orion: Handle errors of clk_prepare_enable() in probe
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (80 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 081/217] i2c: mt65xx: fix IRQ check Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 083/217] usb: bdc: Fix an error handling path in bdc_probe() when no suitable DMA config is available Greg Kroah-Hartman
` (137 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrew Lunn, Alan Stern,
Evgeny Novikov, Kirill Shilimanov, Sasha Levin
From: Evgeny Novikov <novikov@ispras.ru>
[ Upstream commit 4720f1bf4ee4a784d9ece05420ba33c9222a3004 ]
ehci_orion_drv_probe() did not account for possible errors of
clk_prepare_enable() that in particular could cause invocation of
clk_disable_unprepare() on clocks that were not prepared/enabled yet,
e.g. in remove or on handling errors of usb_add_hcd() in probe. Though,
there were several patches fixing different issues with clocks in this
driver, they did not solve this problem.
Add handling of errors of clk_prepare_enable() in ehci_orion_drv_probe()
to avoid calls of clk_disable_unprepare() without previous successful
invocation of clk_prepare_enable().
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: 8c869edaee07 ("ARM: Orion: EHCI: Add support for enabling clocks")
Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Link: https://lore.kernel.org/r/20210825170902.11234-1-novikov@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/host/ehci-orion.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 1aec87ec68df..753c73624fb6 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -253,8 +253,11 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)
* the clock does not exists.
*/
priv->clk = devm_clk_get(&pdev->dev, NULL);
- if (!IS_ERR(priv->clk))
- clk_prepare_enable(priv->clk);
+ if (!IS_ERR(priv->clk)) {
+ err = clk_prepare_enable(priv->clk);
+ if (err)
+ goto err_put_hcd;
+ }
priv->phy = devm_phy_optional_get(&pdev->dev, "usb");
if (IS_ERR(priv->phy)) {
@@ -315,6 +318,7 @@ err_phy_init:
err_phy_get:
if (!IS_ERR(priv->clk))
clk_disable_unprepare(priv->clk);
+err_put_hcd:
usb_put_hcd(hcd);
err:
dev_err(&pdev->dev, "init %s fail, %d\n",
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 083/217] usb: bdc: Fix an error handling path in bdc_probe() when no suitable DMA config is available
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (81 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 082/217] usb: ehci-orion: Handle errors of clk_prepare_enable() in probe Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 084/217] tty: serial: fsl_lpuart: fix the wrong mapbase value Greg Kroah-Hartman
` (136 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Florian Fainelli, Christophe JAILLET,
Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit d2f42e09393c774ab79088d8e3afcc62b3328fc9 ]
If no suitable DMA configuration is available, a previous 'bdc_phy_init()'
call must be undone by a corresponding 'bdc_phy_exit()' call.
Branch to the existing error handling path instead of returning
directly.
Fixes: cc29d4f67757 ("usb: bdc: Add support for USB phy")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/0c5910979f39225d5d8fe68c9ab1c147c68ddee1.1629314734.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/bdc/bdc_core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index 58ba04d858ba..23a27eb33c42 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -573,7 +573,8 @@ static int bdc_probe(struct platform_device *pdev)
if (ret) {
dev_err(dev,
"No suitable DMA config available, abort\n");
- return -ENOTSUPP;
+ ret = -ENOTSUPP;
+ goto phycleanup;
}
dev_dbg(dev, "Using 32-bit address\n");
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 084/217] tty: serial: fsl_lpuart: fix the wrong mapbase value
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (82 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 083/217] usb: bdc: Fix an error handling path in bdc_probe() when no suitable DMA config is available Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 085/217] ath6kl: wmi: fix an error code in ath6kl_wmi_sync_point() Greg Kroah-Hartman
` (135 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Leonard Crestez, Adriana Reus,
Sherry Sun, Andy Duan, Sasha Levin
From: Andy Duan <fugang.duan@nxp.com>
[ Upstream commit d5c38948448abc2bb6b36dbf85a554bf4748885e ]
Register offset needs to be applied on mapbase also.
dma_tx/rx_request use the physical address of UARTDATA.
Register offset is currently only applied to membase (the
corresponding virtual addr) but not on mapbase.
Fixes: 24b1e5f0e83c ("tty: serial: lpuart: add imx7ulp support")
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Adriana Reus <adriana.reus@nxp.com>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Andy Duan <fugang.duan@nxp.com>
Link: https://lore.kernel.org/r/20210819021033.32606-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/fsl_lpuart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 3d5fe53988e5..62d1e4607912 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2170,7 +2170,7 @@ static int lpuart_probe(struct platform_device *pdev)
return PTR_ERR(sport->port.membase);
sport->port.membase += sdata->reg_off;
- sport->port.mapbase = res->start;
+ sport->port.mapbase = res->start + sdata->reg_off;
sport->port.dev = &pdev->dev;
sport->port.type = PORT_LPUART;
ret = platform_get_irq(pdev, 0);
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 085/217] ath6kl: wmi: fix an error code in ath6kl_wmi_sync_point()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (83 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 084/217] tty: serial: fsl_lpuart: fix the wrong mapbase value Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 086/217] bcma: Fix memory leak for internally-handled cores Greg Kroah-Hartman
` (134 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Kalle Valo, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit fd6729ec534cffbbeb3917761e6d1fe6a412d3fe ]
This error path is unlikely because of it checked for NULL and
returned -ENOMEM earlier in the function. But it should return
an error code here as well if we ever do hit it because of a
race condition or something.
Fixes: bdcd81707973 ("Add ath6kl cleaned up driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210813113438.GB30697@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath6kl/wmi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index f80f1757b58f..66df6f8bc0de 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -2513,8 +2513,10 @@ static int ath6kl_wmi_sync_point(struct wmi *wmi, u8 if_idx)
goto free_data_skb;
for (index = 0; index < num_pri_streams; index++) {
- if (WARN_ON(!data_sync_bufs[index].skb))
+ if (WARN_ON(!data_sync_bufs[index].skb)) {
+ ret = -ENOMEM;
goto free_data_skb;
+ }
ep_id = ath6kl_ac2_endpoint_id(wmi->parent_dev,
data_sync_bufs[index].
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 086/217] bcma: Fix memory leak for internally-handled cores
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (84 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 085/217] ath6kl: wmi: fix an error code in ath6kl_wmi_sync_point() Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 087/217] ipv4: make exception cache less predictible Greg Kroah-Hartman
` (133 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zenghui Yu, Kalle Valo, Sasha Levin
From: Zenghui Yu <yuzenghui@huawei.com>
[ Upstream commit b63aed3ff195130fef12e0af590f4838cf0201d8 ]
kmemleak reported that dev_name() of internally-handled cores were leaked
on driver unbinding. Let's use device_initialize() to take refcounts for
them and put_device() to properly free the related stuff.
While looking at it, there's another potential issue for those which should
be *registered* into driver core. If device_register() failed, we put
device once and freed bcma_device structures. In bcma_unregister_cores(),
they're treated as unregistered and we hit both UAF and double-free. That
smells not good and has also been fixed now.
Fixes: ab54bc8460b5 ("bcma: fill core details for every device")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210727025232.663-2-yuzenghui@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bcma/main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index e6986c7608f1..b1783f5b5cb5 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -236,6 +236,7 @@ EXPORT_SYMBOL(bcma_core_irq);
void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
{
+ device_initialize(&core->dev);
core->dev.release = bcma_release_core_dev;
core->dev.bus = &bcma_bus_type;
dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
@@ -299,11 +300,10 @@ static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core)
{
int err;
- err = device_register(&core->dev);
+ err = device_add(&core->dev);
if (err) {
bcma_err(bus, "Could not register dev for core 0x%03X\n",
core->id.id);
- put_device(&core->dev);
return;
}
core->dev_registered = true;
@@ -394,7 +394,7 @@ void bcma_unregister_cores(struct bcma_bus *bus)
/* Now noone uses internally-handled cores, we can free them */
list_for_each_entry_safe(core, tmp, &bus->cores, list) {
list_del(&core->list);
- kfree(core);
+ put_device(&core->dev);
}
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 087/217] ipv4: make exception cache less predictible
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (85 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 086/217] bcma: Fix memory leak for internally-handled cores Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 088/217] net: sched: Fix qdisc_rate_table refcount leak when get tcf_block failed Greg Kroah-Hartman
` (132 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Keyu Man,
Willy Tarreau, David S. Miller, David Ahern, Sasha Levin
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit 67d6d681e15b578c1725bad8ad079e05d1c48a8e ]
Even after commit 6457378fe796 ("ipv4: use siphash instead of Jenkins in
fnhe_hashfun()"), an attacker can still use brute force to learn
some secrets from a victim linux host.
One way to defeat these attacks is to make the max depth of the hash
table bucket a random value.
Before this patch, each bucket of the hash table used to store exceptions
could contain 6 items under attack.
After the patch, each bucket would contains a random number of items,
between 6 and 10. The attacker can no longer infer secrets.
This is slightly increasing memory size used by the hash table,
by 50% in average, we do not expect this to be a problem.
This patch is more complex than the prior one (IPv6 equivalent),
because IPv4 was reusing the oldest entry.
Since we need to be able to evict more than one entry per
update_or_create_fnhe() call, I had to replace
fnhe_oldest() with fnhe_remove_oldest().
Also note that we will queue extra kfree_rcu() calls under stress,
which hopefully wont be a too big issue.
Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Tested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/route.c | 46 ++++++++++++++++++++++++++++++----------------
1 file changed, 30 insertions(+), 16 deletions(-)
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 81901b052907..d67d424be919 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -619,18 +619,25 @@ static void fnhe_flush_routes(struct fib_nh_exception *fnhe)
}
}
-static struct fib_nh_exception *fnhe_oldest(struct fnhe_hash_bucket *hash)
+static void fnhe_remove_oldest(struct fnhe_hash_bucket *hash)
{
- struct fib_nh_exception *fnhe, *oldest;
+ struct fib_nh_exception __rcu **fnhe_p, **oldest_p;
+ struct fib_nh_exception *fnhe, *oldest = NULL;
- oldest = rcu_dereference(hash->chain);
- for (fnhe = rcu_dereference(oldest->fnhe_next); fnhe;
- fnhe = rcu_dereference(fnhe->fnhe_next)) {
- if (time_before(fnhe->fnhe_stamp, oldest->fnhe_stamp))
+ for (fnhe_p = &hash->chain; ; fnhe_p = &fnhe->fnhe_next) {
+ fnhe = rcu_dereference_protected(*fnhe_p,
+ lockdep_is_held(&fnhe_lock));
+ if (!fnhe)
+ break;
+ if (!oldest ||
+ time_before(fnhe->fnhe_stamp, oldest->fnhe_stamp)) {
oldest = fnhe;
+ oldest_p = fnhe_p;
+ }
}
fnhe_flush_routes(oldest);
- return oldest;
+ *oldest_p = oldest->fnhe_next;
+ kfree_rcu(oldest, rcu);
}
static inline u32 fnhe_hashfun(__be32 daddr)
@@ -707,16 +714,21 @@ static void update_or_create_fnhe(struct fib_nh *nh, __be32 daddr, __be32 gw,
if (rt)
fill_route_from_fnhe(rt, fnhe);
} else {
- if (depth > FNHE_RECLAIM_DEPTH)
- fnhe = fnhe_oldest(hash);
- else {
- fnhe = kzalloc(sizeof(*fnhe), GFP_ATOMIC);
- if (!fnhe)
- goto out_unlock;
-
- fnhe->fnhe_next = hash->chain;
- rcu_assign_pointer(hash->chain, fnhe);
+ /* Randomize max depth to avoid some side channels attacks. */
+ int max_depth = FNHE_RECLAIM_DEPTH +
+ prandom_u32_max(FNHE_RECLAIM_DEPTH);
+
+ while (depth > max_depth) {
+ fnhe_remove_oldest(hash);
+ depth--;
}
+
+ fnhe = kzalloc(sizeof(*fnhe), GFP_ATOMIC);
+ if (!fnhe)
+ goto out_unlock;
+
+ fnhe->fnhe_next = hash->chain;
+
fnhe->fnhe_genid = genid;
fnhe->fnhe_daddr = daddr;
fnhe->fnhe_gw = gw;
@@ -724,6 +736,8 @@ static void update_or_create_fnhe(struct fib_nh *nh, __be32 daddr, __be32 gw,
fnhe->fnhe_mtu_locked = lock;
fnhe->fnhe_expires = max(1UL, expires);
+ rcu_assign_pointer(hash->chain, fnhe);
+
/* Exception created; mark the cached routes for the nexthop
* stale, so anyone caching it rechecks if this exception
* applies to them.
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 088/217] net: sched: Fix qdisc_rate_table refcount leak when get tcf_block failed
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (86 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 087/217] ipv4: make exception cache less predictible Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 089/217] net: qualcomm: fix QCA7000 checksum handling Greg Kroah-Hartman
` (131 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Xiyu Yang, Cong Wang, Jakub Kicinski,
Sasha Levin
From: Xiyu Yang <xiyuyang19@fudan.edu.cn>
[ Upstream commit c66070125837900163b81a03063ddd657a7e9bfb ]
The reference counting issue happens in one exception handling path of
cbq_change_class(). When failing to get tcf_block, the function forgets
to decrease the refcount of "rtab" increased by qdisc_put_rtab(),
causing a refcount leak.
Fix this issue by jumping to "failure" label when get tcf_block failed.
Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/1630252681-71588-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/sched/sch_cbq.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index 40fd1ee0095c..dea125d8aac7 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -1590,7 +1590,7 @@ cbq_change_class(struct Qdisc *sch, u32 classid, u32 parentid, struct nlattr **t
err = tcf_block_get(&cl->block, &cl->filter_list);
if (err) {
kfree(cl);
- return err;
+ goto failure;
}
if (tca[TCA_RATE]) {
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 089/217] net: qualcomm: fix QCA7000 checksum handling
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (87 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 088/217] net: sched: Fix qdisc_rate_table refcount leak when get tcf_block failed Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 090/217] netns: protect netns ID lookups with RCU Greg Kroah-Hartman
` (130 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michael Heimpold, Stefan Wahren,
David S. Miller, Sasha Levin
From: Stefan Wahren <stefan.wahren@i2se.com>
[ Upstream commit 429205da6c834447a57279af128bdd56ccd5225e ]
Based on tests the QCA7000 doesn't support checksum offloading. So assume
ip_summed is CHECKSUM_NONE and let the kernel take care of the checksum
handling. This fixes data transfer issues in noisy environments.
Reported-by: Michael Heimpold <michael.heimpold@in-tech.com>
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/qualcomm/qca_spi.c | 2 +-
drivers/net/ethernet/qualcomm/qca_uart.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index 1c87178fc485..1ca1f72474ab 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -413,7 +413,7 @@ qcaspi_receive(struct qcaspi *qca)
skb_put(qca->rx_skb, retcode);
qca->rx_skb->protocol = eth_type_trans(
qca->rx_skb, qca->rx_skb->dev);
- qca->rx_skb->ip_summed = CHECKSUM_UNNECESSARY;
+ skb_checksum_none_assert(qca->rx_skb);
netif_rx_ni(qca->rx_skb);
qca->rx_skb = netdev_alloc_skb_ip_align(net_dev,
net_dev->mtu + VLAN_ETH_HLEN);
diff --git a/drivers/net/ethernet/qualcomm/qca_uart.c b/drivers/net/ethernet/qualcomm/qca_uart.c
index db6068cd7a1f..466e9d07697a 100644
--- a/drivers/net/ethernet/qualcomm/qca_uart.c
+++ b/drivers/net/ethernet/qualcomm/qca_uart.c
@@ -107,7 +107,7 @@ qca_tty_receive(struct serdev_device *serdev, const unsigned char *data,
skb_put(qca->rx_skb, retcode);
qca->rx_skb->protocol = eth_type_trans(
qca->rx_skb, qca->rx_skb->dev);
- qca->rx_skb->ip_summed = CHECKSUM_UNNECESSARY;
+ skb_checksum_none_assert(qca->rx_skb);
netif_rx_ni(qca->rx_skb);
qca->rx_skb = netdev_alloc_skb_ip_align(netdev,
netdev->mtu +
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 090/217] netns: protect netns ID lookups with RCU
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (88 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 089/217] net: qualcomm: fix QCA7000 checksum handling Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 091/217] tty: Fix data race between tiocsti() and flush_to_ldisc() Greg Kroah-Hartman
` (129 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Guillaume Nault, David S. Miller,
Håkon Bugge
From: Guillaume Nault <gnault@redhat.com>
commit 2dce224f469f060b9998a5a869151ef83c08ce77 upstream.
__peernet2id() can be protected by RCU as it only calls idr_for_each(),
which is RCU-safe, and never modifies the nsid table.
rtnl_net_dumpid() can also do lockless lookups. It does two nested
idr_for_each() calls on nsid tables (one direct call and one indirect
call because of rtnl_net_dumpid_one() calling __peernet2id()). The
netnsid tables are never updated. Therefore it is safe to not take the
nsid_lock and run within an RCU-critical section instead.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
---
net/core/net_namespace.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -181,9 +181,9 @@ static int net_eq_idr(int id, void *net,
return 0;
}
-/* Should be called with nsid_lock held. If a new id is assigned, the bool alloc
- * is set to true, thus the caller knows that the new id must be notified via
- * rtnl.
+/* Must be called from RCU-critical section or with nsid_lock held. If
+ * a new id is assigned, the bool alloc is set to true, thus the
+ * caller knows that the new id must be notified via rtnl.
*/
static int __peernet2id_alloc(struct net *net, struct net *peer, bool *alloc)
{
@@ -207,7 +207,7 @@ static int __peernet2id_alloc(struct net
return NETNSA_NSID_NOT_ASSIGNED;
}
-/* should be called with nsid_lock held */
+/* Must be called from RCU-critical section or with nsid_lock held */
static int __peernet2id(struct net *net, struct net *peer)
{
bool no = false;
@@ -240,9 +240,10 @@ int peernet2id(struct net *net, struct n
{
int id;
- spin_lock_bh(&net->nsid_lock);
+ rcu_read_lock();
id = __peernet2id(net, peer);
- spin_unlock_bh(&net->nsid_lock);
+ rcu_read_unlock();
+
return id;
}
EXPORT_SYMBOL(peernet2id);
@@ -761,6 +762,7 @@ struct rtnl_net_dump_cb {
int s_idx;
};
+/* Runs in RCU-critical section. */
static int rtnl_net_dumpid_one(int id, void *peer, void *data)
{
struct rtnl_net_dump_cb *net_cb = (struct rtnl_net_dump_cb *)data;
@@ -791,9 +793,9 @@ static int rtnl_net_dumpid(struct sk_buf
.s_idx = cb->args[0],
};
- spin_lock_bh(&net->nsid_lock);
+ rcu_read_lock();
idr_for_each(&net->netns_ids, rtnl_net_dumpid_one, &net_cb);
- spin_unlock_bh(&net->nsid_lock);
+ rcu_read_unlock();
cb->args[0] = net_cb.idx;
return skb->len;
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 091/217] tty: Fix data race between tiocsti() and flush_to_ldisc()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (89 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 090/217] netns: protect netns ID lookups with RCU Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 092/217] x86/resctrl: Fix a maybe-uninitialized build warning treated as error Greg Kroah-Hartman
` (128 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+97388eb9d31b997fe1d0,
Jiri Slaby, Nguyen Dinh Phi
From: Nguyen Dinh Phi <phind.uet@gmail.com>
commit bb2853a6a421a052268eee00fd5d3f6b3504b2b1 upstream.
The ops->receive_buf() may be accessed concurrently from these two
functions. If the driver flushes data to the line discipline
receive_buf() method while tiocsti() is waiting for the
ops->receive_buf() to finish its work, the data race will happen.
For example:
tty_ioctl |tty_ldisc_receive_buf
->tioctsi | ->tty_port_default_receive_buf
| ->tty_ldisc_receive_buf
->hci_uart_tty_receive | ->hci_uart_tty_receive
->h4_recv | ->h4_recv
In this case, the h4 receive buffer will be overwritten by the
latecomer, and we will lost the data.
Hence, change tioctsi() function to use the exclusive lock interface
from tty_buffer to avoid the data race.
Reported-by: syzbot+97388eb9d31b997fe1d0@syzkaller.appspotmail.com
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Link: https://lore.kernel.org/r/20210823000641.2082292-1-phind.uet@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/tty_io.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2165,8 +2165,6 @@ static int tty_fasync(int fd, struct fil
* Locking:
* Called functions take tty_ldiscs_lock
* current->signal->tty check is safe without locks
- *
- * FIXME: may race normal receive processing
*/
static int tiocsti(struct tty_struct *tty, char __user *p)
@@ -2182,8 +2180,10 @@ static int tiocsti(struct tty_struct *tt
ld = tty_ldisc_ref_wait(tty);
if (!ld)
return -EIO;
+ tty_buffer_lock_exclusive(tty->port);
if (ld->ops->receive_buf)
ld->ops->receive_buf(tty, &ch, &mbz, 1);
+ tty_buffer_unlock_exclusive(tty->port);
tty_ldisc_deref(ld);
return 0;
}
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 092/217] x86/resctrl: Fix a maybe-uninitialized build warning treated as error
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (90 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 091/217] tty: Fix data race between tiocsti() and flush_to_ldisc() Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 093/217] KVM: x86: Update vCPUs hv_clock before back to guest when tsc_offset is adjusted Greg Kroah-Hartman
` (127 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Terry Bowman, kernel test robot,
Babu Moger, Borislav Petkov, Reinette Chatre
From: Babu Moger <babu.moger@amd.com>
commit 527f721478bce3f49b513a733bacd19d6f34b08c upstream.
The recent commit
064855a69003 ("x86/resctrl: Fix default monitoring groups reporting")
caused a RHEL build failure with an uninitialized variable warning
treated as an error because it removed the default case snippet.
The RHEL Makefile uses '-Werror=maybe-uninitialized' to force possibly
uninitialized variable warnings to be treated as errors. This is also
reported by smatch via the 0day robot.
The error from the RHEL build is:
arch/x86/kernel/cpu/resctrl/monitor.c: In function ‘__mon_event_count’:
arch/x86/kernel/cpu/resctrl/monitor.c:261:12: error: ‘m’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
m->chunks += chunks;
^~
The upstream Makefile does not build using '-Werror=maybe-uninitialized'.
So, the problem is not seen there. Fix the problem by putting back the
default case snippet.
[ bp: note that there's nothing wrong with the code and other compilers
do not trigger this warning - this is being done just so the RHEL compiler
is happy. ]
Fixes: 064855a69003 ("x86/resctrl: Fix default monitoring groups reporting")
Reported-by: Terry Bowman <Terry.Bowman@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/162949631908.23903.17090272726012848523.stgit@bmoger-ubuntu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kernel/cpu/intel_rdt_monitor.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/arch/x86/kernel/cpu/intel_rdt_monitor.c
+++ b/arch/x86/kernel/cpu/intel_rdt_monitor.c
@@ -244,6 +244,12 @@ static u64 __mon_event_count(u32 rmid, s
case QOS_L3_MBM_LOCAL_EVENT_ID:
m = &rr->d->mbm_local[rmid];
break;
+ default:
+ /*
+ * Code would never reach here because an invalid
+ * event id would fail the __rmid_read.
+ */
+ return RMID_VAL_ERROR;
}
if (rr->first) {
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 093/217] KVM: x86: Update vCPUs hv_clock before back to guest when tsc_offset is adjusted
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (91 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 092/217] x86/resctrl: Fix a maybe-uninitialized build warning treated as error Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 094/217] IMA: remove -Wmissing-prototypes warning Greg Kroah-Hartman
` (126 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Zelin Deng, Paolo Bonzini
From: Zelin Deng <zelin.deng@linux.alibaba.com>
commit d9130a2dfdd4b21736c91b818f87dbc0ccd1e757 upstream.
When MSR_IA32_TSC_ADJUST is written by guest due to TSC ADJUST feature
especially there's a big tsc warp (like a new vCPU is hot-added into VM
which has been up for a long time), tsc_offset is added by a large value
then go back to guest. This causes system time jump as tsc_timestamp is
not adjusted in the meantime and pvclock monotonic character.
To fix this, just notify kvm to update vCPU's guest time before back to
guest.
Cc: stable@vger.kernel.org
Signed-off-by: Zelin Deng <zelin.deng@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1619576521-81399-2-git-send-email-zelin.deng@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/x86.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2355,6 +2355,10 @@ int kvm_set_msr_common(struct kvm_vcpu *
if (!msr_info->host_initiated) {
s64 adj = data - vcpu->arch.ia32_tsc_adjust_msr;
adjust_tsc_offset_guest(vcpu, adj);
+ /* Before back to guest, tsc_timestamp must be adjusted
+ * as well, otherwise guest's percpu pvclock time could jump.
+ */
+ kvm_make_request(KVM_REQ_CLOCK_UPDATE, vcpu);
}
vcpu->arch.ia32_tsc_adjust_msr = data;
}
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 094/217] IMA: remove -Wmissing-prototypes warning
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (92 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 093/217] KVM: x86: Update vCPUs hv_clock before back to guest when tsc_offset is adjusted Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 095/217] backlight: pwm_bl: Improve bootloader/kernel device handover Greg Kroah-Hartman
` (125 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Austin Kim, Mimi Zohar
From: Austin Kim <austin.kim@lge.com>
commit a32ad90426a9c8eb3915eed26e08ce133bd9e0da upstream.
With W=1 build, the compiler throws warning message as below:
security/integrity/ima/ima_mok.c:24:12: warning:
no previous prototype for ‘ima_mok_init’ [-Wmissing-prototypes]
__init int ima_mok_init(void)
Silence the warning by adding static keyword to ima_mok_init().
Signed-off-by: Austin Kim <austin.kim@lge.com>
Fixes: 41c89b64d718 ("IMA: create machine owner and blacklist keyrings")
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
security/integrity/ima/ima_mok.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/security/integrity/ima/ima_mok.c
+++ b/security/integrity/ima/ima_mok.c
@@ -26,7 +26,7 @@ struct key *ima_blacklist_keyring;
/*
* Allocate the IMA blacklist keyring
*/
-__init int ima_mok_init(void)
+static __init int ima_mok_init(void)
{
struct key_restriction *restriction;
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 095/217] backlight: pwm_bl: Improve bootloader/kernel device handover
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (93 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 094/217] IMA: remove -Wmissing-prototypes warning Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 096/217] clk: kirkwood: Fix a clocking boot regression Greg Kroah-Hartman
` (124 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marek Vasut, Daniel Thompson, Lee Jones
From: Daniel Thompson <daniel.thompson@linaro.org>
commit 79fad92f2e596f5a8dd085788a24f540263ef887 upstream.
Currently there are (at least) two problems in the way pwm_bl starts
managing the enable_gpio pin. Both occur when the backlight is initially
off and the driver finds the pin not already in output mode and, as a
result, unconditionally switches it to output-mode and asserts the signal.
Problem 1: This could cause the backlight to flicker since, at this stage
in driver initialisation, we have no idea what the PWM and regulator are
doing (an unconfigured PWM could easily "rest" at 100% duty cycle).
Problem 2: This will cause us not to correctly honour the
post_pwm_on_delay (which also risks flickers).
Fix this by moving the code to configure the GPIO output mode until after
we have examines the handover state. That allows us to initialize
enable_gpio to off if the backlight is currently off and on if the
backlight is on.
Cc: stable@vger.kernel.org
Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/video/backlight/pwm_bl.c | 54 ++++++++++++++++++++-------------------
1 file changed, 28 insertions(+), 26 deletions(-)
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -199,6 +199,33 @@ static int pwm_backlight_parse_dt(struct
static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb)
{
struct device_node *node = pb->dev->of_node;
+ bool active = true;
+
+ /*
+ * If the enable GPIO is present, observable (either as input
+ * or output) and off then the backlight is not currently active.
+ * */
+ if (pb->enable_gpio && gpiod_get_value_cansleep(pb->enable_gpio) == 0)
+ active = false;
+
+ if (!regulator_is_enabled(pb->power_supply))
+ active = false;
+
+ if (!pwm_is_enabled(pb->pwm))
+ active = false;
+
+ /*
+ * Synchronize the enable_gpio with the observed state of the
+ * hardware.
+ */
+ if (pb->enable_gpio)
+ gpiod_direction_output(pb->enable_gpio, active);
+
+ /*
+ * Do not change pb->enabled here! pb->enabled essentially
+ * tells us if we own one of the regulator's use counts and
+ * right now we do not.
+ */
/* Not booted with device tree or no phandle link to the node */
if (!node || !node->phandle)
@@ -210,20 +237,7 @@ static int pwm_backlight_initial_power_s
* assume that another driver will enable the backlight at the
* appropriate time. Therefore, if it is disabled, keep it so.
*/
-
- /* if the enable GPIO is disabled, do not enable the backlight */
- if (pb->enable_gpio && gpiod_get_value_cansleep(pb->enable_gpio) == 0)
- return FB_BLANK_POWERDOWN;
-
- /* The regulator is disabled, do not enable the backlight */
- if (!regulator_is_enabled(pb->power_supply))
- return FB_BLANK_POWERDOWN;
-
- /* The PWM is disabled, keep it like this */
- if (!pwm_is_enabled(pb->pwm))
- return FB_BLANK_POWERDOWN;
-
- return FB_BLANK_UNBLANK;
+ return active ? FB_BLANK_UNBLANK: FB_BLANK_POWERDOWN;
}
static int pwm_backlight_probe(struct platform_device *pdev)
@@ -300,18 +314,6 @@ static int pwm_backlight_probe(struct pl
pb->enable_gpio = gpio_to_desc(data->enable_gpio);
}
- /*
- * If the GPIO is not known to be already configured as output, that
- * is, if gpiod_get_direction returns either 1 or -EINVAL, change the
- * direction to output and set the GPIO as active.
- * Do not force the GPIO to active when it was already output as it
- * could cause backlight flickering or we would enable the backlight too
- * early. Leave the decision of the initial backlight state for later.
- */
- if (pb->enable_gpio &&
- gpiod_get_direction(pb->enable_gpio) != 0)
- gpiod_direction_output(pb->enable_gpio, 1);
-
pb->power_supply = devm_regulator_get(&pdev->dev, "power");
if (IS_ERR(pb->power_supply)) {
ret = PTR_ERR(pb->power_supply);
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 096/217] clk: kirkwood: Fix a clocking boot regression
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (94 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 095/217] backlight: pwm_bl: Improve bootloader/kernel device handover Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 097/217] fbmem: dont allow too huge resolutions Greg Kroah-Hartman
` (123 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrew Lunn, Chris Packham,
Gregory CLEMENT, Sebastian Hesselbarth, Linus Walleij,
Stephen Boyd
From: Linus Walleij <linus.walleij@linaro.org>
commit aaedb9e00e5400220a8871180d23a83e67f29f63 upstream.
Since a few kernel releases the Pogoplug 4 has crashed like this
during boot:
Unable to handle kernel NULL pointer dereference at virtual address 00000002
(...)
[<c04116ec>] (strlen) from [<c00ead80>] (kstrdup+0x1c/0x4c)
[<c00ead80>] (kstrdup) from [<c04591d8>] (__clk_register+0x44/0x37c)
[<c04591d8>] (__clk_register) from [<c04595ec>] (clk_hw_register+0x20/0x44)
[<c04595ec>] (clk_hw_register) from [<c045bfa8>] (__clk_hw_register_mux+0x198/0x1e4)
[<c045bfa8>] (__clk_hw_register_mux) from [<c045c050>] (clk_register_mux_table+0x5c/0x6c)
[<c045c050>] (clk_register_mux_table) from [<c0acf3e0>] (kirkwood_clk_muxing_setup.constprop.0+0x13c/0x1ac)
[<c0acf3e0>] (kirkwood_clk_muxing_setup.constprop.0) from [<c0aceae0>] (of_clk_init+0x12c/0x214)
[<c0aceae0>] (of_clk_init) from [<c0ab576c>] (time_init+0x20/0x2c)
[<c0ab576c>] (time_init) from [<c0ab3d18>] (start_kernel+0x3dc/0x56c)
[<c0ab3d18>] (start_kernel) from [<00000000>] (0x0)
Code: e3130020 1afffffb e12fff1e c08a1078 (e5d03000)
This is because the "powersave" mux clock 0 was provided in an unterminated
array, which is required by the loop in the driver:
/* Count, allocate, and register clock muxes */
for (n = 0; desc[n].name;)
n++;
Here n will go out of bounds and then call clk_register_mux() on random
memory contents after the mux clock.
Fix this by terminating the array with a blank entry.
Fixes: 105299381d87 ("cpufreq: kirkwood: use the powersave multiplexer")
Cc: stable@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210814235514.403426-1-linus.walleij@linaro.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/clk/mvebu/kirkwood.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/clk/mvebu/kirkwood.c
+++ b/drivers/clk/mvebu/kirkwood.c
@@ -254,6 +254,7 @@ static const char *powersave_parents[] =
static const struct clk_muxing_soc_desc kirkwood_mux_desc[] __initconst = {
{ "powersave", powersave_parents, ARRAY_SIZE(powersave_parents),
11, 1, 0 },
+ { }
};
static struct clk *clk_muxing_get_src(
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 097/217] fbmem: dont allow too huge resolutions
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (95 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 096/217] clk: kirkwood: Fix a clocking boot regression Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:41 ` [PATCH 4.14 098/217] rtc: tps65910: Correct driver module alias Greg Kroah-Hartman
` (122 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot, Tetsuo Handa,
Geert Uytterhoeven, Daniel Vetter, Randy Dunlap
From: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
commit 8c28051cdcbe9dfcec6bd0a4709d67a09df6edae upstream.
syzbot is reporting page fault at vga16fb_fillrect() [1], for
vga16fb_check_var() is failing to detect multiplication overflow.
if (vxres * vyres > maxmem) {
vyres = maxmem / vxres;
if (vyres < yres)
return -ENOMEM;
}
Since no module would accept too huge resolutions where multiplication
overflow happens, let's reject in the common path.
Link: https://syzkaller.appspot.com/bug?extid=04168c8063cfdde1db5e [1]
Reported-by: syzbot <syzbot+04168c8063cfdde1db5e@syzkaller.appspotmail.com>
Debugged-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/185175d6-227a-7b55-433d-b070929b262c@i-love.sakura.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/video/fbdev/core/fbmem.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -34,6 +34,7 @@
#include <linux/fb.h>
#include <linux/fbcon.h>
#include <linux/mem_encrypt.h>
+#include <linux/overflow.h>
#include <asm/fb.h>
@@ -983,6 +984,7 @@ fb_set_var(struct fb_info *info, struct
if ((var->activate & FB_ACTIVATE_FORCE) ||
memcmp(&info->var, var, sizeof(struct fb_var_screeninfo))) {
u32 activate = var->activate;
+ u32 unused;
/* When using FOURCC mode, make sure the red, green, blue and
* transp fields are set to 0.
@@ -1007,6 +1009,11 @@ fb_set_var(struct fb_info *info, struct
if (var->xres < 8 || var->yres < 8)
return -EINVAL;
+ /* Too huge resolution causes multiplication overflow. */
+ if (check_mul_overflow(var->xres, var->yres, &unused) ||
+ check_mul_overflow(var->xres_virtual, var->yres_virtual, &unused))
+ return -EINVAL;
+
ret = info->fbops->fb_check_var(var, info);
if (ret)
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 098/217] rtc: tps65910: Correct driver module alias
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (96 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 097/217] fbmem: dont allow too huge resolutions Greg Kroah-Hartman
@ 2021-09-20 16:41 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 099/217] blk-zoned: allow zone management send operations without CAP_SYS_ADMIN Greg Kroah-Hartman
` (121 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Anton Bambura, Dmitry Osipenko,
Alexandre Belloni
From: Dmitry Osipenko <digetx@gmail.com>
commit 8d448fa0a8bb1c8d94eef7647edffe9ac81a281e upstream.
The TPS65910 RTC driver module doesn't auto-load because of the wrong
module alias that doesn't match the device name, fix it.
Cc: stable@vger.kernel.org
Reported-by: Anton Bambura <jenneron@protonmail.com>
Tested-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210808160030.8556-1-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/rtc/rtc-tps65910.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/rtc/rtc-tps65910.c
+++ b/drivers/rtc/rtc-tps65910.c
@@ -480,6 +480,6 @@ static struct platform_driver tps65910_r
};
module_platform_driver(tps65910_rtc_driver);
-MODULE_ALIAS("platform:rtc-tps65910");
+MODULE_ALIAS("platform:tps65910-rtc");
MODULE_AUTHOR("Venu Byravarasu <vbyravarasu@nvidia.com>");
MODULE_LICENSE("GPL");
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 099/217] blk-zoned: allow zone management send operations without CAP_SYS_ADMIN
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (97 preceding siblings ...)
2021-09-20 16:41 ` [PATCH 4.14 098/217] rtc: tps65910: Correct driver module alias Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 100/217] blk-zoned: allow BLKREPORTZONE " Greg Kroah-Hartman
` (120 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Niklas Cassel, Damien Le Moal,
Aravind Ramesh, Adam Manzanares, Himanshu Madhani,
Johannes Thumshirn, Jens Axboe
From: Niklas Cassel <niklas.cassel@wdc.com>
commit ead3b768bb51259e3a5f2287ff5fc9041eb6f450 upstream.
Zone management send operations (BLKRESETZONE, BLKOPENZONE, BLKCLOSEZONE
and BLKFINISHZONE) should be allowed under the same permissions as write().
(write() does not require CAP_SYS_ADMIN).
Additionally, other ioctls like BLKSECDISCARD and BLKZEROOUT only check if
the fd was successfully opened with FMODE_WRITE.
(They do not require CAP_SYS_ADMIN).
Currently, zone management send operations require both CAP_SYS_ADMIN
and that the fd was successfully opened with FMODE_WRITE.
Remove the CAP_SYS_ADMIN requirement, so that zone management send
operations match the access control requirement of write(), BLKSECDISCARD
and BLKZEROOUT.
Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Aravind Ramesh <aravind.ramesh@wdc.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: stable@vger.kernel.org # v4.10+
Link: https://lore.kernel.org/r/20210811110505.29649-2-Niklas.Cassel@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
block/blk-zoned.c | 3 ---
1 file changed, 3 deletions(-)
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -338,9 +338,6 @@ int blkdev_reset_zones_ioctl(struct bloc
if (!blk_queue_is_zoned(q))
return -ENOTTY;
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
-
if (!(mode & FMODE_WRITE))
return -EBADF;
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 100/217] blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMIN
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (98 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 099/217] blk-zoned: allow zone management send operations without CAP_SYS_ADMIN Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 101/217] PCI/MSI: Skip masking MSI-X on Xen PV Greg Kroah-Hartman
` (119 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Niklas Cassel, Damien Le Moal,
Aravind Ramesh, Adam Manzanares, Himanshu Madhani,
Johannes Thumshirn, Jens Axboe
From: Niklas Cassel <niklas.cassel@wdc.com>
commit 4d643b66089591b4769bcdb6fd1bfeff2fe301b8 upstream.
A user space process should not need the CAP_SYS_ADMIN capability set
in order to perform a BLKREPORTZONE ioctl.
Getting the zone report is required in order to get the write pointer.
Neither read() nor write() requires CAP_SYS_ADMIN, so it is reasonable
that a user space process that can read/write from/to the device, also
can get the write pointer. (Since e.g. writes have to be at the write
pointer.)
Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Aravind Ramesh <aravind.ramesh@wdc.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: stable@vger.kernel.org # v4.10+
Link: https://lore.kernel.org/r/20210811110505.29649-3-Niklas.Cassel@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
block/blk-zoned.c | 3 ---
1 file changed, 3 deletions(-)
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -277,9 +277,6 @@ int blkdev_report_zones_ioctl(struct blo
if (!blk_queue_is_zoned(q))
return -ENOTTY;
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
-
if (copy_from_user(&rep, argp, sizeof(struct blk_zone_report)))
return -EFAULT;
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 101/217] PCI/MSI: Skip masking MSI-X on Xen PV
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (99 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 100/217] blk-zoned: allow BLKREPORTZONE " Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 102/217] powerpc/perf/hv-gpci: Fix counter value parsing Greg Kroah-Hartman
` (118 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marek Marczykowski-Górecki,
Thomas Gleixner, Bjorn Helgaas
From: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
commit 1a519dc7a73c977547d8b5108d98c6e769c89f4b upstream.
When running as Xen PV guest, masking MSI-X is a responsibility of the
hypervisor. The guest has no write access to the relevant BAR at all - when
it tries to, it results in a crash like this:
BUG: unable to handle page fault for address: ffffc9004069100c
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
RIP: e030:__pci_enable_msix_range.part.0+0x26b/0x5f0
e1000e_set_interrupt_capability+0xbf/0xd0 [e1000e]
e1000_probe+0x41f/0xdb0 [e1000e]
local_pci_probe+0x42/0x80
(...)
The recently introduced function msix_mask_all() does not check the global
variable pci_msi_ignore_mask which is set by XEN PV to bypass the masking
of MSI[-X] interrupts.
Add the check to make this function XEN PV compatible.
Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210826170342.135172-1-marmarek@invisiblethingslab.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/msi.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -754,6 +754,9 @@ static void msix_mask_all(void __iomem *
u32 ctrl = PCI_MSIX_ENTRY_CTRL_MASKBIT;
int i;
+ if (pci_msi_ignore_mask)
+ return;
+
for (i = 0; i < tsize; i++, base += PCI_MSIX_ENTRY_SIZE)
writel(ctrl, base + PCI_MSIX_ENTRY_VECTOR_CTRL);
}
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 102/217] powerpc/perf/hv-gpci: Fix counter value parsing
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (100 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 101/217] PCI/MSI: Skip masking MSI-X on Xen PV Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 103/217] xen: fix setting of max_pfn in shared_info Greg Kroah-Hartman
` (117 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nageswara R Sastry, Kajol Jain,
Michael Ellerman
From: Kajol Jain <kjain@linux.ibm.com>
commit f9addd85fbfacf0d155e83dbee8696d6df5ed0c7 upstream.
H_GetPerformanceCounterInfo (0xF080) hcall returns the counter data in
the result buffer. Result buffer has specific format defined in the PAPR
specification. One of the fields is counter offset and width of the
counter data returned.
Counter data are returned in a unsigned char array in big endian byte
order. To get the final counter data, the values must be left shifted
byte at a time. But commit 220a0c609ad17 ("powerpc/perf: Add support for
the hv gpci (get performance counter info) interface") made the shifting
bitwise and also assumed little endian order. Because of that, hcall
counters values are reported incorrectly.
In particular this can lead to counters go backwards which messes up the
counter prev vs now calculation and leads to huge counter value
reporting:
#: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
-C 0 -I 1000
time counts unit events
1.000078854 18,446,744,073,709,535,232 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
2.000213293 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
3.000320107 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
4.000428392 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
5.000537864 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
6.000649087 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
7.000760312 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
8.000865218 16,448 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
9.000978985 18,446,744,073,709,535,232 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
10.001088891 16,384 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
11.001201435 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
12.001307937 18,446,744,073,709,535,232 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
Fix the shifting logic to correct match the format, ie. read bytes in
big endian order.
Fixes: e4f226b1580b ("powerpc/perf/hv-gpci: Increase request buffer size")
Cc: stable@vger.kernel.org # v4.6+
Reported-by: Nageswara R Sastry<rnsastry@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Nageswara R Sastry<rnsastry@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210813082158.429023-1-kjain@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/perf/hv-gpci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/perf/hv-gpci.c
+++ b/arch/powerpc/perf/hv-gpci.c
@@ -168,7 +168,7 @@ static unsigned long single_gpci_request
*/
count = 0;
for (i = offset; i < offset + length; i++)
- count |= arg->bytes[i] << (i - offset);
+ count |= (u64)(arg->bytes[i]) << ((length - 1 - (i - offset)) * 8);
*value = count;
out:
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 103/217] xen: fix setting of max_pfn in shared_info
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (101 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 102/217] powerpc/perf/hv-gpci: Fix counter value parsing Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 104/217] include/linux/list.h: add a macro to test if entry is pointing to the head Greg Kroah-Hartman
` (116 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Juergen Gross, Jan Beulich
From: Juergen Gross <jgross@suse.com>
commit 4b511d5bfa74b1926daefd1694205c7f1bcf677f upstream.
Xen PV guests are specifying the highest used PFN via the max_pfn
field in shared_info. This value is used by the Xen tools when saving
or migrating the guest.
Unfortunately this field is misnamed, as in reality it is specifying
the number of pages (including any memory holes) of the guest, so it
is the highest used PFN + 1. Renaming isn't possible, as this is a
public Xen hypervisor interface which needs to be kept stable.
The kernel will set the value correctly initially at boot time, but
when adding more pages (e.g. due to memory hotplug or ballooning) a
real PFN number is stored in max_pfn. This is done when expanding the
p2m array, and the PFN stored there is even possibly wrong, as it
should be the last possible PFN of the just added P2M frame, and not
one which led to the P2M expansion.
Fix that by setting shared_info->max_pfn to the last possible PFN + 1.
Fixes: 98dd166ea3a3c3 ("x86/xen/p2m: hint at the last populated P2M entry")
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20210730092622.9973-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/xen/p2m.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -613,8 +613,8 @@ int xen_alloc_p2m_entry(unsigned long pf
}
/* Expanded the p2m? */
- if (pfn > xen_p2m_last_pfn) {
- xen_p2m_last_pfn = pfn;
+ if (pfn >= xen_p2m_last_pfn) {
+ xen_p2m_last_pfn = ALIGN(pfn + 1, P2M_PER_PAGE);
HYPERVISOR_shared_info->arch.max_pfn = xen_p2m_last_pfn;
}
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 104/217] include/linux/list.h: add a macro to test if entry is pointing to the head
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (102 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 103/217] xen: fix setting of max_pfn in shared_info Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 105/217] 9p/xen: Fix end of loop tests for list_for_each_entry Greg Kroah-Hartman
` (115 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andy Shevchenko, Andrew Morton,
Cezary Rojewski, Linus Torvalds
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
commit e130816164e244b692921de49771eeb28205152d upstream.
Add a macro to test if entry is pointing to the head of the list which is
useful in cases like:
list_for_each_entry(pos, &head, member) {
if (cond)
break;
}
if (list_entry_is_head(pos, &head, member))
return -ERRNO;
that allows to avoid additional variable to be added to track if loop has
not been stopped in the middle.
While here, convert list_for_each_entry*() family of macros to use a new one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lkml.kernel.org/r/20200929134342.51489-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/list.h | 29 +++++++++++++++++++----------
1 file changed, 19 insertions(+), 10 deletions(-)
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -485,6 +485,15 @@ static inline void list_splice_tail_init
pos = n, n = pos->prev)
/**
+ * list_entry_is_head - test if the entry points to the head of the list
+ * @pos: the type * to cursor
+ * @head: the head for your list.
+ * @member: the name of the list_head within the struct.
+ */
+#define list_entry_is_head(pos, head, member) \
+ (&pos->member == (head))
+
+/**
* list_for_each_entry - iterate over list of given type
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
@@ -492,7 +501,7 @@ static inline void list_splice_tail_init
*/
#define list_for_each_entry(pos, head, member) \
for (pos = list_first_entry(head, typeof(*pos), member); \
- &pos->member != (head); \
+ !list_entry_is_head(pos, head, member); \
pos = list_next_entry(pos, member))
/**
@@ -503,7 +512,7 @@ static inline void list_splice_tail_init
*/
#define list_for_each_entry_reverse(pos, head, member) \
for (pos = list_last_entry(head, typeof(*pos), member); \
- &pos->member != (head); \
+ !list_entry_is_head(pos, head, member); \
pos = list_prev_entry(pos, member))
/**
@@ -528,7 +537,7 @@ static inline void list_splice_tail_init
*/
#define list_for_each_entry_continue(pos, head, member) \
for (pos = list_next_entry(pos, member); \
- &pos->member != (head); \
+ !list_entry_is_head(pos, head, member); \
pos = list_next_entry(pos, member))
/**
@@ -542,7 +551,7 @@ static inline void list_splice_tail_init
*/
#define list_for_each_entry_continue_reverse(pos, head, member) \
for (pos = list_prev_entry(pos, member); \
- &pos->member != (head); \
+ !list_entry_is_head(pos, head, member); \
pos = list_prev_entry(pos, member))
/**
@@ -554,7 +563,7 @@ static inline void list_splice_tail_init
* Iterate over list of given type, continuing from current position.
*/
#define list_for_each_entry_from(pos, head, member) \
- for (; &pos->member != (head); \
+ for (; !list_entry_is_head(pos, head, member); \
pos = list_next_entry(pos, member))
/**
@@ -567,7 +576,7 @@ static inline void list_splice_tail_init
* Iterate backwards over list of given type, continuing from current position.
*/
#define list_for_each_entry_from_reverse(pos, head, member) \
- for (; &pos->member != (head); \
+ for (; !list_entry_is_head(pos, head, member); \
pos = list_prev_entry(pos, member))
/**
@@ -580,7 +589,7 @@ static inline void list_splice_tail_init
#define list_for_each_entry_safe(pos, n, head, member) \
for (pos = list_first_entry(head, typeof(*pos), member), \
n = list_next_entry(pos, member); \
- &pos->member != (head); \
+ !list_entry_is_head(pos, head, member); \
pos = n, n = list_next_entry(n, member))
/**
@@ -596,7 +605,7 @@ static inline void list_splice_tail_init
#define list_for_each_entry_safe_continue(pos, n, head, member) \
for (pos = list_next_entry(pos, member), \
n = list_next_entry(pos, member); \
- &pos->member != (head); \
+ !list_entry_is_head(pos, head, member); \
pos = n, n = list_next_entry(n, member))
/**
@@ -611,7 +620,7 @@ static inline void list_splice_tail_init
*/
#define list_for_each_entry_safe_from(pos, n, head, member) \
for (n = list_next_entry(pos, member); \
- &pos->member != (head); \
+ !list_entry_is_head(pos, head, member); \
pos = n, n = list_next_entry(n, member))
/**
@@ -627,7 +636,7 @@ static inline void list_splice_tail_init
#define list_for_each_entry_safe_reverse(pos, n, head, member) \
for (pos = list_last_entry(head, typeof(*pos), member), \
n = list_prev_entry(pos, member); \
- &pos->member != (head); \
+ !list_entry_is_head(pos, head, member); \
pos = n, n = list_prev_entry(n, member))
/**
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 105/217] 9p/xen: Fix end of loop tests for list_for_each_entry
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (103 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 104/217] include/linux/list.h: add a macro to test if entry is pointing to the head Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 106/217] soc: aspeed: lpc-ctrl: Fix boundary check for mmap Greg Kroah-Hartman
` (114 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Harshvardhan Jha, Stefano Stabellini,
Dominique Martinet
From: Harshvardhan Jha <harshvardhan.jha@oracle.com>
commit 732b33d0dbf17e9483f0b50385bf606f724f50a2 upstream.
This patch addresses the following problems:
- priv can never be NULL, so this part of the check is useless
- if the loop ran through the whole list, priv->client is invalid and
it is more appropriate and sufficient to check for the end of
list_for_each_entry loop condition.
Link: http://lkml.kernel.org/r/20210727000709.225032-1-harshvardhan.jha@oracle.com
Signed-off-by: Harshvardhan Jha <harshvardhan.jha@oracle.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/9p/trans_xen.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/9p/trans_xen.c
+++ b/net/9p/trans_xen.c
@@ -139,7 +139,7 @@ static bool p9_xen_write_todo(struct xen
static int p9_xen_request(struct p9_client *client, struct p9_req_t *p9_req)
{
- struct xen_9pfs_front_priv *priv = NULL;
+ struct xen_9pfs_front_priv *priv;
RING_IDX cons, prod, masked_cons, masked_prod;
unsigned long flags;
u32 size = p9_req->tc->size;
@@ -152,7 +152,7 @@ static int p9_xen_request(struct p9_clie
break;
}
read_unlock(&xen_9pfs_lock);
- if (!priv || priv->client != client)
+ if (list_entry_is_head(priv, &xen_9pfs_devs, list))
return -EINVAL;
num = p9_req->tc->tag % priv->num_rings;
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 106/217] soc: aspeed: lpc-ctrl: Fix boundary check for mmap
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (104 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 105/217] 9p/xen: Fix end of loop tests for list_for_each_entry Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 107/217] crypto: public_key: fix overflow during implicit conversion Greg Kroah-Hartman
` (113 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Iwona Winiarska, Andrew Jeffery,
Joel Stanley, Joel Stanley
From: Iwona Winiarska <iwona.winiarska@intel.com>
commit b49a0e69a7b1a68c8d3f64097d06dabb770fec96 upstream.
The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one
side of the comparison, and uses resource address (rather than just the
resource size) on the other side of the comparison.
This can allow malicious userspace to easily bypass the boundary check and
map pages that are located outside memory-region reserved by the driver.
Fixes: 6c4e97678501 ("drivers/misc: Add Aspeed LPC control driver")
Cc: stable@vger.kernel.org
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/misc/aspeed-lpc-ctrl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/misc/aspeed-lpc-ctrl.c
+++ b/drivers/misc/aspeed-lpc-ctrl.c
@@ -44,7 +44,7 @@ static int aspeed_lpc_ctrl_mmap(struct f
unsigned long vsize = vma->vm_end - vma->vm_start;
pgprot_t prot = vma->vm_page_prot;
- if (vma->vm_pgoff + vsize > lpc_ctrl->mem_base + lpc_ctrl->mem_size)
+ if (vma->vm_pgoff + vma_pages(vma) > lpc_ctrl->mem_size >> PAGE_SHIFT)
return -EINVAL;
/* ast2400/2500 AHB accesses are not cache coherent */
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 107/217] crypto: public_key: fix overflow during implicit conversion
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (105 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 106/217] soc: aspeed: lpc-ctrl: Fix boundary check for mmap Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 108/217] block: bfq: fix bfq_set_next_ioprio_data() Greg Kroah-Hartman
` (112 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, zhenwei pi, Jarkko Sakkinen
From: zhenwei pi <pizhenwei@bytedance.com>
commit f985911b7bc75d5c98ed24d8aaa8b94c590f7c6a upstream.
Hit kernel warning like this, it can be reproduced by verifying 256
bytes datafile by keyctl command, run script:
RAWDATA=rawdata
SIGDATA=sigdata
modprobe pkcs8_key_parser
rm -rf *.der *.pem *.pfx
rm -rf $RAWDATA
dd if=/dev/random of=$RAWDATA bs=256 count=1
openssl req -nodes -x509 -newkey rsa:4096 -keyout key.pem -out cert.pem \
-subj "/C=CN/ST=GD/L=SZ/O=vihoo/OU=dev/CN=xx.com/emailAddress=yy@xx.com"
KEY_ID=`openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER | keyctl \
padd asymmetric 123 @s`
keyctl pkey_sign $KEY_ID 0 $RAWDATA enc=pkcs1 hash=sha1 > $SIGDATA
keyctl pkey_verify $KEY_ID 0 $RAWDATA $SIGDATA enc=pkcs1 hash=sha1
Then the kernel reports:
WARNING: CPU: 5 PID: 344556 at crypto/rsa-pkcs1pad.c:540
pkcs1pad_verify+0x160/0x190
...
Call Trace:
public_key_verify_signature+0x282/0x380
? software_key_query+0x12d/0x180
? keyctl_pkey_params_get+0xd6/0x130
asymmetric_key_verify_signature+0x66/0x80
keyctl_pkey_verify+0xa5/0x100
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
The reason of this issue, in function 'asymmetric_key_verify_signature':
'.digest_size(u8) = params->in_len(u32)' leads overflow of an u8 value,
so use u32 instead of u8 for digest_size field. And reorder struct
public_key_signature, it saves 8 bytes on a 64-bit machine.
Cc: stable@vger.kernel.org
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/crypto/public_key.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/include/crypto/public_key.h
+++ b/include/crypto/public_key.h
@@ -35,9 +35,9 @@ extern void public_key_free(struct publi
struct public_key_signature {
struct asymmetric_key_id *auth_ids[2];
u8 *s; /* Signature */
- u32 s_size; /* Number of bytes in signature */
u8 *digest;
- u8 digest_size; /* Number of bytes in digest */
+ u32 s_size; /* Number of bytes in signature */
+ u32 digest_size; /* Number of bytes in digest */
const char *pkey_algo;
const char *hash_algo;
};
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 108/217] block: bfq: fix bfq_set_next_ioprio_data()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (106 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 107/217] crypto: public_key: fix overflow during implicit conversion Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 109/217] power: supply: max17042: handle fails of reading status register Greg Kroah-Hartman
` (111 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Damien Le Moal, Hannes Reinecke, Jens Axboe
From: Damien Le Moal <damien.lemoal@wdc.com>
commit a680dd72ec336b81511e3bff48efac6dbfa563e7 upstream.
For a request that has a priority level equal to or larger than
IOPRIO_BE_NR, bfq_set_next_ioprio_data() prints a critical warning but
defaults to setting the request new_ioprio field to IOPRIO_BE_NR. This
is not consistent with the warning and the allowed values for priority
levels. Fix this by setting the request new_ioprio field to
IOPRIO_BE_NR - 1, the lowest priority level allowed.
Cc: <stable@vger.kernel.org>
Fixes: aee69d78dec0 ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler")
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210811033702.368488-2-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
block/bfq-iosched.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -3825,7 +3825,7 @@ bfq_set_next_ioprio_data(struct bfq_queu
if (bfqq->new_ioprio >= IOPRIO_BE_NR) {
pr_crit("bfq_set_next_ioprio_data: new_ioprio %d\n",
bfqq->new_ioprio);
- bfqq->new_ioprio = IOPRIO_BE_NR;
+ bfqq->new_ioprio = IOPRIO_BE_NR - 1;
}
bfqq->entity.new_weight = bfq_ioprio_to_weight(bfqq->new_ioprio);
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 109/217] power: supply: max17042: handle fails of reading status register
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (107 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 108/217] block: bfq: fix bfq_set_next_ioprio_data() Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 110/217] dm crypt: Avoid percpu_counter spinlock contention in crypt_page_alloc() Greg Kroah-Hartman
` (110 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Hans de Goede,
Sebastian Reichel
From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
commit 54784ffa5b267f57161eb8fbb811499f22a0a0bf upstream.
Reading status register can fail in the interrupt handler. In such
case, the regmap_read() will not store anything useful under passed
'val' variable and random stack value will be used to determine type of
interrupt.
Handle the regmap_read() failure to avoid handling interrupt type and
triggering changed power supply event based on random stack value.
Fixes: 39e7213edc4f ("max17042_battery: Support regmap to access device's registers")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/power/supply/max17042_battery.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/power/supply/max17042_battery.c
+++ b/drivers/power/supply/max17042_battery.c
@@ -833,8 +833,12 @@ static irqreturn_t max17042_thread_handl
{
struct max17042_chip *chip = dev;
u32 val;
+ int ret;
+
+ ret = regmap_read(chip->regmap, MAX17042_STATUS, &val);
+ if (ret)
+ return IRQ_HANDLED;
- regmap_read(chip->regmap, MAX17042_STATUS, &val);
if ((val & STATUS_INTR_SOCMIN_BIT) ||
(val & STATUS_INTR_SOCMAX_BIT)) {
dev_info(&chip->client->dev, "SOC threshold INTR\n");
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 110/217] dm crypt: Avoid percpu_counter spinlock contention in crypt_page_alloc()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (108 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 109/217] power: supply: max17042: handle fails of reading status register Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 111/217] VMCI: fix NULL pointer dereference when unmapping queue pair Greg Kroah-Hartman
` (109 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, DJ Gregor, Mikulas Patocka,
Arne Welzel, Mike Snitzer
From: Arne Welzel <arne.welzel@corelight.com>
commit 528b16bfc3ae5f11638e71b3b63a81f9999df727 upstream.
On systems with many cores using dm-crypt, heavy spinlock contention in
percpu_counter_compare() can be observed when the page allocation limit
for a given device is reached or close to be reached. This is due
to percpu_counter_compare() taking a spinlock to compute an exact
result on potentially many CPUs at the same time.
Switch to non-exact comparison of allocated and allowed pages by using
the value returned by percpu_counter_read_positive() to avoid taking
the percpu_counter spinlock.
This may over/under estimate the actual number of allocated pages by at
most (batch-1) * num_online_cpus().
Currently, batch is bounded by 32. The system on which this issue was
first observed has 256 CPUs and 512GB of RAM. With a 4k page size, this
change may over/under estimate by 31MB. With ~10G (2%) allowed dm-crypt
allocations, this seems an acceptable error. Certainly preferred over
running into the spinlock contention.
This behavior was reproduced on an EC2 c5.24xlarge instance with 96 CPUs
and 192GB RAM as follows, but can be provoked on systems with less CPUs
as well.
* Disable swap
* Tune vm settings to promote regular writeback
$ echo 50 > /proc/sys/vm/dirty_expire_centisecs
$ echo 25 > /proc/sys/vm/dirty_writeback_centisecs
$ echo $((128 * 1024 * 1024)) > /proc/sys/vm/dirty_background_bytes
* Create 8 dmcrypt devices based on files on a tmpfs
* Create and mount an ext4 filesystem on each crypt devices
* Run stress-ng --hdd 8 within one of above filesystems
Total %system usage collected from sysstat goes to ~35%. Write throughput
on the underlying loop device is ~2GB/s. perf profiling an individual
kworker kcryptd thread shows the following profile, indicating spinlock
contention in percpu_counter_compare():
99.98% 0.00% kworker/u193:46 [kernel.kallsyms] [k] ret_from_fork
|
--ret_from_fork
kthread
worker_thread
|
--99.92%--process_one_work
|
|--80.52%--kcryptd_crypt
| |
| |--62.58%--mempool_alloc
| | |
| | --62.24%--crypt_page_alloc
| | |
| | --61.51%--__percpu_counter_compare
| | |
| | --61.34%--__percpu_counter_sum
| | |
| | |--58.68%--_raw_spin_lock_irqsave
| | | |
| | | --58.30%--native_queued_spin_lock_slowpath
| | |
| | --0.69%--cpumask_next
| | |
| | --0.51%--_find_next_bit
| |
| |--10.61%--crypt_convert
| | |
| | |--6.05%--xts_crypt
...
After applying this patch and running the same test, %system usage is
lowered to ~7% and write throughput on the loop device increases
to ~2.7GB/s. perf report shows mempool_alloc() as ~8% rather than ~62%
in the profile and not hitting the percpu_counter() spinlock anymore.
|--8.15%--mempool_alloc
| |
| |--3.93%--crypt_page_alloc
| | |
| | --3.75%--__alloc_pages
| | |
| | --3.62%--get_page_from_freelist
| | |
| | --3.22%--rmqueue_bulk
| | |
| | --2.59%--_raw_spin_lock
| | |
| | --2.57%--native_queued_spin_lock_slowpath
| |
| --3.05%--_raw_spin_lock_irqsave
| |
| --2.49%--native_queued_spin_lock_slowpath
Suggested-by: DJ Gregor <dj@corelight.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Arne Welzel <arne.welzel@corelight.com>
Fixes: 5059353df86e ("dm crypt: limit the number of allocated pages")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/dm-crypt.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -2188,7 +2188,12 @@ static void *crypt_page_alloc(gfp_t gfp_
struct crypt_config *cc = pool_data;
struct page *page;
- if (unlikely(percpu_counter_compare(&cc->n_allocated_pages, dm_crypt_pages_per_client) >= 0) &&
+ /*
+ * Note, percpu_counter_read_positive() may over (and under) estimate
+ * the current usage by at most (batch - 1) * num_online_cpus() pages,
+ * but avoids potential spinlock contention of an exact result.
+ */
+ if (unlikely(percpu_counter_read_positive(&cc->n_allocated_pages) >= dm_crypt_pages_per_client) &&
likely(gfp_mask & __GFP_NORETRY))
return NULL;
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 111/217] VMCI: fix NULL pointer dereference when unmapping queue pair
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (109 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 110/217] dm crypt: Avoid percpu_counter spinlock contention in crypt_page_alloc() Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 112/217] media: uvc: dont do DMA on stack Greg Kroah-Hartman
` (108 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Jorgen Hansen, Wang Hai
From: Wang Hai <wanghai38@huawei.com>
commit a30dc6cf0dc51419021550152e435736aaef8799 upstream.
I got a NULL pointer dereference report when doing fuzz test:
Call Trace:
qp_release_pages+0xae/0x130
qp_host_unregister_user_memory.isra.25+0x2d/0x80
vmci_qp_broker_unmap+0x191/0x320
? vmci_host_do_alloc_queuepair.isra.9+0x1c0/0x1c0
vmci_host_unlocked_ioctl+0x59f/0xd50
? do_vfs_ioctl+0x14b/0xa10
? tomoyo_file_ioctl+0x28/0x30
? vmci_host_do_alloc_queuepair.isra.9+0x1c0/0x1c0
__x64_sys_ioctl+0xea/0x120
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
When a queue pair is created by the following call, it will not
register the user memory if the page_store is NULL, and the
entry->state will be set to VMCIQPB_CREATED_NO_MEM.
vmci_host_unlocked_ioctl
vmci_host_do_alloc_queuepair
vmci_qp_broker_alloc
qp_broker_alloc
qp_broker_create // set entry->state = VMCIQPB_CREATED_NO_MEM;
When unmapping this queue pair, qp_host_unregister_user_memory() will
be called to unregister the non-existent user memory, which will
result in a null pointer reference. It will also change
VMCIQPB_CREATED_NO_MEM to VMCIQPB_CREATED_MEM, which should not be
present in this operation.
Only when the qp broker has mem, it can unregister the user
memory when unmapping the qp broker.
Only when the qp broker has no mem, it can register the user
memory when mapping the qp broker.
Fixes: 06164d2b72aa ("VMCI: queue pairs implementation.")
Cc: stable <stable@vger.kernel.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20210818124845.488312-1-wanghai38@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/misc/vmw_vmci/vmci_queue_pair.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/misc/vmw_vmci/vmci_queue_pair.c
+++ b/drivers/misc/vmw_vmci/vmci_queue_pair.c
@@ -2338,7 +2338,8 @@ int vmci_qp_broker_map(struct vmci_handl
is_local = entry->qp.flags & VMCI_QPFLAG_LOCAL;
result = VMCI_SUCCESS;
- if (context_id != VMCI_HOST_CONTEXT_ID) {
+ if (context_id != VMCI_HOST_CONTEXT_ID &&
+ !QPBROKERSTATE_HAS_MEM(entry)) {
struct vmci_qp_page_store page_store;
page_store.pages = guest_mem;
@@ -2448,7 +2449,8 @@ int vmci_qp_broker_unmap(struct vmci_han
is_local = entry->qp.flags & VMCI_QPFLAG_LOCAL;
- if (context_id != VMCI_HOST_CONTEXT_ID) {
+ if (context_id != VMCI_HOST_CONTEXT_ID &&
+ QPBROKERSTATE_HAS_MEM(entry)) {
qp_acquire_queue_mutex(entry->produce_q);
result = qp_save_headers(entry);
if (result < VMCI_SUCCESS)
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 112/217] media: uvc: dont do DMA on stack
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (110 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 111/217] VMCI: fix NULL pointer dereference when unmapping queue pair Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 113/217] media: rc-loopback: return number of emitters rather than error Greg Kroah-Hartman
` (107 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Laurent Pinchart, Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
commit 1a10d7fdb6d0e235e9d230916244cc2769d3f170 upstream.
As warned by smatch:
drivers/media/usb/uvc/uvc_v4l2.c:911 uvc_ioctl_g_input() error: doing dma on the stack (&i)
drivers/media/usb/uvc/uvc_v4l2.c:943 uvc_ioctl_s_input() error: doing dma on the stack (&i)
those two functions call uvc_query_ctrl passing a pointer to
a data at the DMA stack. those are used to send URBs via
usb_control_msg(). Using DMA stack is not supported and should
not work anymore on modern Linux versions.
So, use a kmalloc'ed buffer.
Cc: stable@vger.kernel.org # Kernel 4.9 and upper
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/media/usb/uvc/uvc_v4l2.c | 34 +++++++++++++++++++++++-----------
1 file changed, 23 insertions(+), 11 deletions(-)
--- a/drivers/media/usb/uvc/uvc_v4l2.c
+++ b/drivers/media/usb/uvc/uvc_v4l2.c
@@ -876,8 +876,8 @@ static int uvc_ioctl_g_input(struct file
{
struct uvc_fh *handle = fh;
struct uvc_video_chain *chain = handle->chain;
+ u8 *buf;
int ret;
- u8 i;
if (chain->selector == NULL ||
(chain->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) {
@@ -885,22 +885,27 @@ static int uvc_ioctl_g_input(struct file
return 0;
}
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
ret = uvc_query_ctrl(chain->dev, UVC_GET_CUR, chain->selector->id,
chain->dev->intfnum, UVC_SU_INPUT_SELECT_CONTROL,
- &i, 1);
- if (ret < 0)
- return ret;
+ buf, 1);
+ if (!ret)
+ *input = *buf - 1;
- *input = i - 1;
- return 0;
+ kfree(buf);
+
+ return ret;
}
static int uvc_ioctl_s_input(struct file *file, void *fh, unsigned int input)
{
struct uvc_fh *handle = fh;
struct uvc_video_chain *chain = handle->chain;
+ u8 *buf;
int ret;
- u32 i;
ret = uvc_acquire_privileges(handle);
if (ret < 0)
@@ -916,10 +921,17 @@ static int uvc_ioctl_s_input(struct file
if (input >= chain->selector->bNrInPins)
return -EINVAL;
- i = input + 1;
- return uvc_query_ctrl(chain->dev, UVC_SET_CUR, chain->selector->id,
- chain->dev->intfnum, UVC_SU_INPUT_SELECT_CONTROL,
- &i, 1);
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ *buf = input + 1;
+ ret = uvc_query_ctrl(chain->dev, UVC_SET_CUR, chain->selector->id,
+ chain->dev->intfnum, UVC_SU_INPUT_SELECT_CONTROL,
+ buf, 1);
+ kfree(buf);
+
+ return ret;
}
static int uvc_ioctl_queryctrl(struct file *file, void *fh,
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 113/217] media: rc-loopback: return number of emitters rather than error
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (111 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 112/217] media: uvc: dont do DMA on stack Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 114/217] libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs Greg Kroah-Hartman
` (106 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Young, Mauro Carvalho Chehab
From: Sean Young <sean@mess.org>
commit 6b7f554be8c92319d7e6df92fd247ebb9beb4a45 upstream.
The LIRC_SET_TRANSMITTER_MASK ioctl should return the number of emitters
if an invalid list was set.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/media/rc/rc-loopback.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/media/rc/rc-loopback.c
+++ b/drivers/media/rc/rc-loopback.c
@@ -52,7 +52,7 @@ static int loop_set_tx_mask(struct rc_de
if ((mask & (RXMASK_REGULAR | RXMASK_LEARNING)) != mask) {
dprintk("invalid tx mask: %u\n", mask);
- return -EINVAL;
+ return 2;
}
dprintk("setting tx mask: %u\n", mask);
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 114/217] libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (112 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 113/217] media: rc-loopback: return number of emitters rather than error Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 115/217] ARM: 9105/1: atags_to_fdt: dont warn about stack size Greg Kroah-Hartman
` (105 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kate Hsuan, Hans de Goede,
Damien Le Moal, Martin K. Petersen, Jens Axboe
From: Hans de Goede <hdegoede@redhat.com>
commit 8a6430ab9c9c87cb64c512e505e8690bbaee190b upstream.
Commit ca6bfcb2f6d9 ("libata: Enable queued TRIM for Samsung SSD 860")
limited the existing ATA_HORKAGE_NO_NCQ_TRIM quirk from "Samsung SSD 8*",
covering all Samsung 800 series SSDs, to only apply to "Samsung SSD 840*"
and "Samsung SSD 850*" series based on information from Samsung.
But there is a large number of users which is still reporting issues
with the Samsung 860 and 870 SSDs combined with Intel, ASmedia or
Marvell SATA controllers and all reporters also report these problems
going away when disabling queued trims.
Note that with AMD SATA controllers users are reporting even worse
issues and only completely disabling NCQ helps there, this will be
addressed in a separate patch.
Fixes: ca6bfcb2f6d9 ("libata: Enable queued TRIM for Samsung SSD 860")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203475
Cc: stable@vger.kernel.org
Cc: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210823095220.30157-1-hdegoede@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/ata/libata-core.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4564,6 +4564,10 @@ static const struct ata_blacklist_entry
ATA_HORKAGE_ZERO_AFTER_TRIM, },
{ "Samsung SSD 850*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ { "Samsung SSD 860*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
+ ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ { "Samsung SSD 870*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
+ ATA_HORKAGE_ZERO_AFTER_TRIM, },
{ "FCCT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM, },
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 115/217] ARM: 9105/1: atags_to_fdt: dont warn about stack size
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (113 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 114/217] libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 116/217] PCI: Restrict ASMedia ASM1062 SATA Max Payload Size Supported Greg Kroah-Hartman
` (104 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nicolas Pitre, David Heidelberg,
Arnd Bergmann, Russell King (Oracle)
From: David Heidelberg <david@ixit.cz>
commit b30d0289de72c62516df03fdad8d53f552c69839 upstream.
The merge_fdt_bootargs() function by definition consumes more than 1024
bytes of stack because it has a 1024 byte command line on the stack,
meaning that we always get a warning when building this file:
arch/arm/boot/compressed/atags_to_fdt.c: In function 'merge_fdt_bootargs':
arch/arm/boot/compressed/atags_to_fdt.c:98:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=]
However, as this is the decompressor and we know that it has a very shallow
call chain, and we do not actually risk overflowing the kernel stack
at runtime here.
This just shuts up the warning by disabling the warning flag for this
file.
Tested on Nexus 7 2012 builds.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/compressed/Makefile | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -87,6 +87,8 @@ $(addprefix $(obj)/,$(libfdt_objs) atags
$(addprefix $(obj)/,$(libfdt_hdrs))
ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
+CFLAGS_REMOVE_atags_to_fdt.o += -Wframe-larger-than=${CONFIG_FRAME_WARN}
+CFLAGS_atags_to_fdt.o += -Wframe-larger-than=1280
OBJS += $(libfdt_objs) atags_to_fdt.o
endif
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 116/217] PCI: Restrict ASMedia ASM1062 SATA Max Payload Size Supported
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (114 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 115/217] ARM: 9105/1: atags_to_fdt: dont warn about stack size Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 117/217] PCI: Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure Greg Kroah-Hartman
` (103 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Rötti, Marek Behún,
Bjorn Helgaas, Krzysztof Wilczyński, Pali Rohár
From: Marek Behún <kabel@kernel.org>
commit b12d93e9958e028856cbcb061b6e64728ca07755 upstream.
The ASMedia ASM1062 SATA controller advertises Max_Payload_Size_Supported
of 512, but in fact it cannot handle incoming TLPs with payload size of
512.
We discovered this issue on PCIe controllers capable of MPS = 512 (Aardvark
and DesignWare), where the issue presents itself as an External Abort.
Bjorn Helgaas says:
Probably ASM1062 reports a Malformed TLP error when it receives a data
payload of 512 bytes, and Aardvark, DesignWare, etc convert this to an
arm64 External Abort. [1]
To avoid this problem, limit the ASM1062 Max Payload Size Supported to 256
bytes, so we set the Max Payload Size of devices that may send TLPs to the
ASM1062 to 256 or less.
[1] https://lore.kernel.org/linux-pci/20210601170907.GA1949035@bjorn-Precision-5520/
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212695
Link: https://lore.kernel.org/r/20210624171418.27194-2-kabel@kernel.org
Reported-by: Rötti <espressobinboardarmbiantempmailaddress@posteo.de>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/quirks.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3040,6 +3040,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SO
PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLARFLARE,
PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ASMEDIA, 0x0612, fixup_mpss_256);
/* Intel 5000 and 5100 Memory controllers have an errata with read completion
* coalescing (which is enabled by default on some BIOSes) and MPS of 256B.
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 117/217] PCI: Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (115 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 116/217] PCI: Restrict ASMedia ASM1062 SATA Max Payload Size Supported Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 118/217] PCI: xilinx-nwl: Enable the clock through CCF Greg Kroah-Hartman
` (102 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Krzysztof Wilczyński, Bjorn Helgaas
From: Krzysztof Wilczyński <kw@linux.com>
commit a8bd29bd49c4156ea0ec5a97812333e2aeef44e7 upstream.
The pciconfig_read() syscall reads PCI configuration space using
hardware-dependent config accessors.
If the read fails on PCI, most accessors don't return an error; they
pretend the read was successful and got ~0 data from the device, so the
syscall returns success with ~0 data in the buffer.
When the accessor does return an error, pciconfig_read() normally fills the
user's buffer with ~0 and returns an error in errno. But after
e4585da22ad0 ("pci syscall.c: Switch to refcounting API"), we don't fill
the buffer with ~0 for the EPERM "user lacks CAP_SYS_ADMIN" error.
Userspace may rely on the ~0 data to detect errors, but after e4585da22ad0,
that would not detect CAP_SYS_ADMIN errors.
Restore the original behaviour of filling the buffer with ~0 when the
CAP_SYS_ADMIN check fails.
[bhelgaas: commit log, fold in Nathan's fix
https://lore.kernel.org/r/20210803200836.500658-1-nathan@kernel.org]
Fixes: e4585da22ad0 ("pci syscall.c: Switch to refcounting API")
Link: https://lore.kernel.org/r/20210729233755.1509616-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/syscall.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/pci/syscall.c
+++ b/drivers/pci/syscall.c
@@ -24,8 +24,10 @@ SYSCALL_DEFINE5(pciconfig_read, unsigned
long err;
int cfg_ret;
+ err = -EPERM;
+ dev = NULL;
if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
+ goto error;
err = -ENODEV;
dev = pci_get_bus_and_slot(bus, dfn);
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 118/217] PCI: xilinx-nwl: Enable the clock through CCF
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (116 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 117/217] PCI: Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 119/217] PCI: aardvark: Increase polling delay to 1.5s while waiting for PIO response Greg Kroah-Hartman
` (101 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hyun Kwon, Bharat Kumar Gogada,
Michal Simek, Lorenzo Pieralisi
From: Hyun Kwon <hyun.kwon@xilinx.com>
commit de0a01f5296651d3a539f2d23d0db8f359483696 upstream.
Enable PCIe reference clock. There is no remove function that's why
this should be enough for simple operation.
Normally this clock is enabled by default by firmware but there are
usecases where this clock should be enabled by driver itself.
It is also good that PCIe clock is recorded in a clock framework.
Link: https://lore.kernel.org/r/ee6997a08fab582b1c6de05f8be184f3fe8d5357.1624618100.git.michal.simek@xilinx.com
Fixes: ab597d35ef11 ("PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller")
Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/host/pcie-xilinx-nwl.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/drivers/pci/host/pcie-xilinx-nwl.c
+++ b/drivers/pci/host/pcie-xilinx-nwl.c
@@ -10,6 +10,7 @@
* (at your option) any later version.
*/
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
@@ -171,6 +172,7 @@ struct nwl_pcie {
u8 root_busno;
struct nwl_msi msi;
struct irq_domain *legacy_irq_domain;
+ struct clk *clk;
raw_spinlock_t leg_mask_lock;
};
@@ -852,6 +854,16 @@ static int nwl_pcie_probe(struct platfor
return err;
}
+ pcie->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(pcie->clk))
+ return PTR_ERR(pcie->clk);
+
+ err = clk_prepare_enable(pcie->clk);
+ if (err) {
+ dev_err(dev, "can't enable PCIe ref clock\n");
+ return err;
+ }
+
err = nwl_pcie_bridge_init(pcie);
if (err) {
dev_err(dev, "HW Initialization failed\n");
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 119/217] PCI: aardvark: Increase polling delay to 1.5s while waiting for PIO response
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (117 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 118/217] PCI: xilinx-nwl: Enable the clock through CCF Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 120/217] PCI: aardvark: Fix masking and unmasking legacy INTx interrupts Greg Kroah-Hartman
` (100 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pali Rohár, Lorenzo Pieralisi,
Marek Behún
From: Pali Rohár <pali@kernel.org>
commit 02bcec3ea5591720114f586960490b04b093a09e upstream.
Measurements in different conditions showed that aardvark hardware PIO
response can take up to 1.44s. Increase wait timeout from 1ms to 1.5s to
ensure that we do not miss responses from hardware. After 1.44s hardware
returns errors (e.g. Completer abort).
The previous two patches fixed checking for PIO status, so now we can use
it to also catch errors which are reported by hardware after 1.44s.
After applying this patch, kernel can detect and print PIO errors to dmesg:
[ 6.879999] advk-pcie d0070000.pcie: Non-posted PIO Response Status: CA, 0xe00 @ 0x100004
[ 6.896436] advk-pcie d0070000.pcie: Posted PIO Response Status: COMP_ERR, 0x804 @ 0x100004
[ 6.913049] advk-pcie d0070000.pcie: Posted PIO Response Status: COMP_ERR, 0x804 @ 0x100010
[ 6.929663] advk-pcie d0070000.pcie: Non-posted PIO Response Status: CA, 0xe00 @ 0x100010
[ 6.953558] advk-pcie d0070000.pcie: Posted PIO Response Status: COMP_ERR, 0x804 @ 0x100014
[ 6.970170] advk-pcie d0070000.pcie: Non-posted PIO Response Status: CA, 0xe00 @ 0x100014
[ 6.994328] advk-pcie d0070000.pcie: Posted PIO Response Status: COMP_ERR, 0x804 @ 0x100004
Without this patch kernel prints only a generic error to dmesg:
[ 5.246847] advk-pcie d0070000.pcie: config read/write timed out
Link: https://lore.kernel.org/r/20210722144041.12661-3-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org # 7fbcb5da811b ("PCI: aardvark: Don't rely on jiffies while holding spinlock")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/host/pci-aardvark.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pci/host/pci-aardvark.c
+++ b/drivers/pci/host/pci-aardvark.c
@@ -185,7 +185,7 @@
(PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | \
PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where))
-#define PIO_RETRY_CNT 500
+#define PIO_RETRY_CNT 750000 /* 1.5 s */
#define PIO_RETRY_DELAY 2 /* 2 us*/
#define LINK_WAIT_MAX_RETRIES 10
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 120/217] PCI: aardvark: Fix masking and unmasking legacy INTx interrupts
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (118 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 119/217] PCI: aardvark: Increase polling delay to 1.5s while waiting for PIO response Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 121/217] HID: input: do not report stylus battery state as "full" Greg Kroah-Hartman
` (99 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marc Zyngier, Pali Rohár,
Lorenzo Pieralisi
From: Pali Rohár <pali@kernel.org>
commit d212dcee27c1f89517181047e5485fcbba4a25c2 upstream.
irq_mask and irq_unmask callbacks need to be properly guarded by raw spin
locks as masking/unmasking procedure needs atomic read-modify-write
operation on hardware register.
Link: https://lore.kernel.org/r/20210820155020.3000-1-pali@kernel.org
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/host/pci-aardvark.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/pci/host/pci-aardvark.c
+++ b/drivers/pci/host/pci-aardvark.c
@@ -200,6 +200,7 @@ struct advk_pcie {
struct list_head resources;
struct irq_domain *irq_domain;
struct irq_chip irq_chip;
+ raw_spinlock_t irq_lock;
struct irq_domain *msi_domain;
struct irq_domain *msi_inner_domain;
struct irq_chip msi_bottom_irq_chip;
@@ -638,22 +639,28 @@ static void advk_pcie_irq_mask(struct ir
{
struct advk_pcie *pcie = d->domain->host_data;
irq_hw_number_t hwirq = irqd_to_hwirq(d);
+ unsigned long flags;
u32 mask;
+ raw_spin_lock_irqsave(&pcie->irq_lock, flags);
mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
mask |= PCIE_ISR1_INTX_ASSERT(hwirq);
advk_writel(pcie, mask, PCIE_ISR1_MASK_REG);
+ raw_spin_unlock_irqrestore(&pcie->irq_lock, flags);
}
static void advk_pcie_irq_unmask(struct irq_data *d)
{
struct advk_pcie *pcie = d->domain->host_data;
irq_hw_number_t hwirq = irqd_to_hwirq(d);
+ unsigned long flags;
u32 mask;
+ raw_spin_lock_irqsave(&pcie->irq_lock, flags);
mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
mask &= ~PCIE_ISR1_INTX_ASSERT(hwirq);
advk_writel(pcie, mask, PCIE_ISR1_MASK_REG);
+ raw_spin_unlock_irqrestore(&pcie->irq_lock, flags);
}
static int advk_pcie_irq_map(struct irq_domain *h,
@@ -736,6 +743,8 @@ static int advk_pcie_init_irq_domain(str
struct device_node *pcie_intc_node;
struct irq_chip *irq_chip;
+ raw_spin_lock_init(&pcie->irq_lock);
+
pcie_intc_node = of_get_next_child(node, NULL);
if (!pcie_intc_node) {
dev_err(dev, "No PCIe Intc node found\n");
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 121/217] HID: input: do not report stylus battery state as "full"
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (119 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 120/217] PCI: aardvark: Fix masking and unmasking legacy INTx interrupts Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 122/217] RDMA/iwcm: Release resources if iw_cm module initialization fails Greg Kroah-Hartman
` (98 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kenneth Albanowski, Dmitry Torokhov,
Jiri Kosina, Sasha Levin
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[ Upstream commit f4abaa9eebde334045ed6ac4e564d050f1df3013 ]
The power supply states of discharging, charging, full, etc, represent
state of charging, not the capacity level of the battery (for which
we have a separate property). Current HID usage tables to not allow
for expressing charging state of the batteries found in generic
styli, so we should simply assume that the battery is discharging
even if current capacity is at 100% when battery strength reporting
is done via HID interface. In fact, we were doing just that before
commit 581c4484769e.
This change helps UIs to not mis-represent fully charged batteries in
styli as being charging/topping-off.
Fixes: 581c4484769e ("HID: input: map digitizer battery usage")
Reported-by: Kenneth Albanowski <kenalba@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-input.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 0e63cedcc3b5..96bf221ba572 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -425,8 +425,6 @@ static int hidinput_get_battery_property(struct power_supply *psy,
if (dev->battery_status == HID_BATTERY_UNKNOWN)
val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
- else if (dev->battery_capacity == 100)
- val->intval = POWER_SUPPLY_STATUS_FULL;
else
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
break;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 122/217] RDMA/iwcm: Release resources if iw_cm module initialization fails
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (120 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 121/217] HID: input: do not report stylus battery state as "full" Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 123/217] docs: Fix infiniband uverbs minor number Greg Kroah-Hartman
` (97 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Leon Romanovsky, Jason Gunthorpe,
Sasha Levin
From: Leon Romanovsky <leonro@nvidia.com>
[ Upstream commit e677b72a0647249370f2635862bf0241c86f66ad ]
The failure during iw_cm module initialization partially left the system
with unreleased memory and other resources. Rewrite the module init/exit
routines in such way that netlink commands will be opened only after
successful initialization.
Fixes: b493d91d333e ("iwcm: common code for port mapper")
Link: https://lore.kernel.org/r/b01239f99cb1a3e6d2b0694c242d89e6410bcd93.1627048781.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/core/iwcm.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/infiniband/core/iwcm.c b/drivers/infiniband/core/iwcm.c
index 16b0c10348e8..66204e08ce5a 100644
--- a/drivers/infiniband/core/iwcm.c
+++ b/drivers/infiniband/core/iwcm.c
@@ -1176,29 +1176,34 @@ static int __init iw_cm_init(void)
ret = iwpm_init(RDMA_NL_IWCM);
if (ret)
- pr_err("iw_cm: couldn't init iwpm\n");
- else
- rdma_nl_register(RDMA_NL_IWCM, iwcm_nl_cb_table);
+ return ret;
+
iwcm_wq = alloc_ordered_workqueue("iw_cm_wq", 0);
if (!iwcm_wq)
- return -ENOMEM;
+ goto err_alloc;
iwcm_ctl_table_hdr = register_net_sysctl(&init_net, "net/iw_cm",
iwcm_ctl_table);
if (!iwcm_ctl_table_hdr) {
pr_err("iw_cm: couldn't register sysctl paths\n");
- destroy_workqueue(iwcm_wq);
- return -ENOMEM;
+ goto err_sysctl;
}
+ rdma_nl_register(RDMA_NL_IWCM, iwcm_nl_cb_table);
return 0;
+
+err_sysctl:
+ destroy_workqueue(iwcm_wq);
+err_alloc:
+ iwpm_exit(RDMA_NL_IWCM);
+ return -ENOMEM;
}
static void __exit iw_cm_cleanup(void)
{
+ rdma_nl_unregister(RDMA_NL_IWCM);
unregister_net_sysctl_table(iwcm_ctl_table_hdr);
destroy_workqueue(iwcm_wq);
- rdma_nl_unregister(RDMA_NL_IWCM);
iwpm_exit(RDMA_NL_IWCM);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 123/217] docs: Fix infiniband uverbs minor number
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (121 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 122/217] RDMA/iwcm: Release resources if iw_cm module initialization fails Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 124/217] pinctrl: samsung: Fix pinctrl bank pin count Greg Kroah-Hartman
` (96 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Leon Romanovsky, Jason Gunthorpe,
Sasha Levin
From: Leon Romanovsky <leonro@nvidia.com>
[ Upstream commit 8d7e415d55610d503fdb8815344846b72d194a40 ]
Starting from the beginning of infiniband subsystem, the uverbs char
devices start from 192 as a minor number, see
commit bc38a6abdd5a ("[PATCH] IB uverbs: core implementation").
This patch updates the admin guide documentation to reflect it.
Fixes: 9d85025b0418 ("docs-rst: create an user's manual book")
Link: https://lore.kernel.org/r/bad03e6bcde45550c01e12908a6fe7dfa4770703.1627477347.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Documentation/admin-guide/devices.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt
index 4ec843123cc3..361bff6d3053 100644
--- a/Documentation/admin-guide/devices.txt
+++ b/Documentation/admin-guide/devices.txt
@@ -2989,10 +2989,10 @@
65 = /dev/infiniband/issm1 Second InfiniBand IsSM device
...
127 = /dev/infiniband/issm63 63rd InfiniBand IsSM device
- 128 = /dev/infiniband/uverbs0 First InfiniBand verbs device
- 129 = /dev/infiniband/uverbs1 Second InfiniBand verbs device
+ 192 = /dev/infiniband/uverbs0 First InfiniBand verbs device
+ 193 = /dev/infiniband/uverbs1 Second InfiniBand verbs device
...
- 159 = /dev/infiniband/uverbs31 31st InfiniBand verbs device
+ 223 = /dev/infiniband/uverbs31 31st InfiniBand verbs device
232 char Biometric Devices
0 = /dev/biometric/sensor0/fingerprint first fingerprint sensor on first device
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 124/217] pinctrl: samsung: Fix pinctrl bank pin count
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (122 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 123/217] docs: Fix infiniband uverbs minor number Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 125/217] vfio: Use config not menuconfig for VFIO_NOIOMMU Greg Kroah-Hartman
` (95 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jaehyoung Choi, Sam Protsenko,
Krzysztof Kozlowski, Sasha Levin
From: Jaehyoung Choi <jkkkkk.choi@samsung.com>
[ Upstream commit 70115558ab02fe8d28a6634350b3491a542aaa02 ]
Commit 1abd18d1a51a ("pinctrl: samsung: Register pinctrl before GPIO")
changes the order of GPIO and pinctrl registration: now pinctrl is
registered before GPIO. That means gpio_chip->ngpio is not set when
samsung_pinctrl_register() called, and one cannot rely on that value
anymore. Use `pin_bank->nr_pins' instead of `pin_bank->gpio_chip.ngpio'
to fix mentioned inconsistency.
Fixes: 1abd18d1a51a ("pinctrl: samsung: Register pinctrl before GPIO")
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20210730192905.7173-1-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/samsung/pinctrl-samsung.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index 7c0f5d4e89f3..ab04d4c4941d 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -891,7 +891,7 @@ static int samsung_pinctrl_register(struct platform_device *pdev,
pin_bank->grange.pin_base = drvdata->pin_base
+ pin_bank->pin_base;
pin_bank->grange.base = pin_bank->grange.pin_base;
- pin_bank->grange.npins = pin_bank->gpio_chip.ngpio;
+ pin_bank->grange.npins = pin_bank->nr_pins;
pin_bank->grange.gc = &pin_bank->gpio_chip;
pinctrl_add_gpio_range(drvdata->pctl_dev, &pin_bank->grange);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 125/217] vfio: Use config not menuconfig for VFIO_NOIOMMU
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (123 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 124/217] pinctrl: samsung: Fix pinctrl bank pin count Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [OpenRISC] " Greg Kroah-Hartman
` (94 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason Gunthorpe, Cornelia Huck,
Alex Williamson, Sasha Levin
From: Jason Gunthorpe <jgg@nvidia.com>
[ Upstream commit 26c22cfde5dd6e63f25c48458b0185dcb0fbb2fd ]
VFIO_NOIOMMU is supposed to be an element in the VFIO menu, not start
a new menu. Correct this copy-paste mistake.
Fixes: 03a76b60f8ba ("vfio: Include No-IOMMU mode")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/0-v1-3f0b685c3679+478-vfio_menuconfig_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/vfio/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/vfio/Kconfig b/drivers/vfio/Kconfig
index c84333eb5eb5..b7765271d0fb 100644
--- a/drivers/vfio/Kconfig
+++ b/drivers/vfio/Kconfig
@@ -29,7 +29,7 @@ menuconfig VFIO
If you don't know what to do here, say N.
-menuconfig VFIO_NOIOMMU
+config VFIO_NOIOMMU
bool "VFIO No-IOMMU support"
depends on VFIO
help
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 126/217] openrisc: dont printk() unconditionally
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 002/217] xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG Greg Kroah-Hartman
` (218 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Randy Dunlap, kernel test robot,
Jonas Bonn, Stefan Kristiansson, Stafford Horne, openrisc,
Sasha Levin
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit 946e1052cdcc7e585ee5d1e72528ca49fb295243 ]
Don't call printk() when CONFIG_PRINTK is not set.
Fixes the following build errors:
or1k-linux-ld: arch/openrisc/kernel/entry.o: in function `_external_irq_handler':
(.text+0x804): undefined reference to `printk'
(.text+0x804): relocation truncated to fit: R_OR1K_INSN_REL_26 against undefined symbol `printk'
Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: openrisc@lists.librecores.org
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/openrisc/kernel/entry.S | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/openrisc/kernel/entry.S b/arch/openrisc/kernel/entry.S
index 0fdfa7142f4b..272eda8d6368 100644
--- a/arch/openrisc/kernel/entry.S
+++ b/arch/openrisc/kernel/entry.S
@@ -495,6 +495,7 @@ EXCEPTION_ENTRY(_external_irq_handler)
l.bnf 1f // ext irq enabled, all ok.
l.nop
+#ifdef CONFIG_PRINTK
l.addi r1,r1,-0x8
l.movhi r3,hi(42f)
l.ori r3,r3,lo(42f)
@@ -508,6 +509,7 @@ EXCEPTION_ENTRY(_external_irq_handler)
.string "\n\rESR interrupt bug: in _external_irq_handler (ESR %x)\n\r"
.align 4
.previous
+#endif
l.ori r4,r4,SPR_SR_IEE // fix the bug
// l.sw PT_SR(r1),r4
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [OpenRISC] [PATCH 4.14 126/217] openrisc: dont printk() unconditionally
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
0 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: openrisc
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit 946e1052cdcc7e585ee5d1e72528ca49fb295243 ]
Don't call printk() when CONFIG_PRINTK is not set.
Fixes the following build errors:
or1k-linux-ld: arch/openrisc/kernel/entry.o: in function `_external_irq_handler':
(.text+0x804): undefined reference to `printk'
(.text+0x804): relocation truncated to fit: R_OR1K_INSN_REL_26 against undefined symbol `printk'
Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: openrisc at lists.librecores.org
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/openrisc/kernel/entry.S | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/openrisc/kernel/entry.S b/arch/openrisc/kernel/entry.S
index 0fdfa7142f4b..272eda8d6368 100644
--- a/arch/openrisc/kernel/entry.S
+++ b/arch/openrisc/kernel/entry.S
@@ -495,6 +495,7 @@ EXCEPTION_ENTRY(_external_irq_handler)
l.bnf 1f // ext irq enabled, all ok.
l.nop
+#ifdef CONFIG_PRINTK
l.addi r1,r1,-0x8
l.movhi r3,hi(42f)
l.ori r3,r3,lo(42f)
@@ -508,6 +509,7 @@ EXCEPTION_ENTRY(_external_irq_handler)
.string "\n\rESR interrupt bug: in _external_irq_handler (ESR %x)\n\r"
.align 4
.previous
+#endif
l.ori r4,r4,SPR_SR_IEE // fix the bug
// l.sw PT_SR(r1),r4
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread
* [PATCH 4.14 127/217] pinctrl: single: Fix error return code in pcs_parse_bits_in_pinctrl_entry()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (125 preceding siblings ...)
2021-09-20 16:42 ` [OpenRISC] " Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 128/217] scsi: qedi: Fix error codes in qedi_alloc_global_queues() Greg Kroah-Hartman
` (92 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Zhen Lei, Linus Walleij,
Sasha Levin
From: Zhen Lei <thunder.leizhen@huawei.com>
[ Upstream commit d789a490d32fdf0465275e3607f8a3bc87d3f3ba ]
Fix to return -ENOTSUPP instead of 0 when PCS_HAS_PINCONF is true, which
is the same as that returned in pcs_parse_pinconf().
Fixes: 4e7e8017a80e ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210722033930.4034-2-thunder.leizhen@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/pinctrl-single.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index f751b5c3bf7e..e33972c3a420 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -1161,6 +1161,7 @@ static int pcs_parse_bits_in_pinctrl_entry(struct pcs_device *pcs,
if (PCS_HAS_PINCONF) {
dev_err(pcs->dev, "pinconf not supported\n");
+ res = -ENOTSUPP;
goto free_pingroups;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 128/217] scsi: qedi: Fix error codes in qedi_alloc_global_queues()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (126 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 127/217] pinctrl: single: Fix error return code in pcs_parse_bits_in_pinctrl_entry() Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 129/217] MIPS: Malta: fix alignment of the devicetree buffer Greg Kroah-Hartman
` (91 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Manish Rangankar, Dan Carpenter,
Martin K. Petersen, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 4dbe57d46d54a847875fa33e7d05877bb341585e ]
This function had some left over code that returned 1 on error instead
negative error codes. Convert everything to use negative error codes. The
caller treats all non-zero returns the same so this does not affect run
time.
A couple places set "rc" instead of "status" so those error paths ended up
returning success by mistake. Get rid of the "rc" variable and use
"status" everywhere.
Remove the bogus "status = 0" initialization, as a future proofing measure
so the compiler will warn about uninitialized error codes.
Link: https://lore.kernel.org/r/20210810084753.GD23810@kili
Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/qedi/qedi_main.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c
index 06958a192a5b..09f57ef35990 100644
--- a/drivers/scsi/qedi/qedi_main.c
+++ b/drivers/scsi/qedi/qedi_main.c
@@ -1302,7 +1302,7 @@ static int qedi_alloc_global_queues(struct qedi_ctx *qedi)
{
u32 *list;
int i;
- int status = 0, rc;
+ int status;
u32 *pbl;
dma_addr_t page;
int num_pages;
@@ -1313,14 +1313,14 @@ static int qedi_alloc_global_queues(struct qedi_ctx *qedi)
*/
if (!qedi->num_queues) {
QEDI_ERR(&qedi->dbg_ctx, "No MSI-X vectors available!\n");
- return 1;
+ return -ENOMEM;
}
/* Make sure we allocated the PBL that will contain the physical
* addresses of our queues
*/
if (!qedi->p_cpuq) {
- status = 1;
+ status = -EINVAL;
goto mem_alloc_failure;
}
@@ -1335,13 +1335,13 @@ static int qedi_alloc_global_queues(struct qedi_ctx *qedi)
"qedi->global_queues=%p.\n", qedi->global_queues);
/* Allocate DMA coherent buffers for BDQ */
- rc = qedi_alloc_bdq(qedi);
- if (rc)
+ status = qedi_alloc_bdq(qedi);
+ if (status)
goto mem_alloc_failure;
/* Allocate DMA coherent buffers for NVM_ISCSI_CFG */
- rc = qedi_alloc_nvm_iscsi_cfg(qedi);
- if (rc)
+ status = qedi_alloc_nvm_iscsi_cfg(qedi);
+ if (status)
goto mem_alloc_failure;
/* Allocate a CQ and an associated PBL for each MSI-X
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 129/217] MIPS: Malta: fix alignment of the devicetree buffer
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (127 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 128/217] scsi: qedi: Fix error codes in qedi_alloc_global_queues() Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 130/217] media: dib8000: rewrite the init prbs logic Greg Kroah-Hartman
` (90 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oleksij Rempel, Thomas Bogendoerfer,
Sasha Levin
From: Oleksij Rempel <o.rempel@pengutronix.de>
[ Upstream commit bea6a94a279bcbe6b2cde348782b28baf12255a5 ]
Starting with following patch MIPS Malta is not able to boot:
| commit 79edff12060fe7772af08607eff50c0e2486c5ba
| Author: Rob Herring <robh@kernel.org>
| scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9
The reason is the alignment test added to the fdt_ro_probe_(). To fix
this issue, we need to make sure that fdt_buf is aligned.
Since the dtc patch was designed to uncover potential issue, I handle
initial MIPS Malta patch as initial bug.
Fixes: e81a8c7dabac ("MIPS: Malta: Setup RAM regions via DT")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/mti-malta/malta-dtshim.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/mti-malta/malta-dtshim.c b/arch/mips/mti-malta/malta-dtshim.c
index 7859b6e49863..5b5d78a7882a 100644
--- a/arch/mips/mti-malta/malta-dtshim.c
+++ b/arch/mips/mti-malta/malta-dtshim.c
@@ -26,7 +26,7 @@
#define ROCIT_CONFIG_GEN1_MEMMAP_SHIFT 8
#define ROCIT_CONFIG_GEN1_MEMMAP_MASK (0xf << 8)
-static unsigned char fdt_buf[16 << 10] __initdata;
+static unsigned char fdt_buf[16 << 10] __initdata __aligned(8);
/* determined physical memory size, not overridden by command line args */
extern unsigned long physical_memsize;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 130/217] media: dib8000: rewrite the init prbs logic
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (128 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 129/217] MIPS: Malta: fix alignment of the devicetree buffer Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 131/217] crypto: mxs-dcp - Use sg_mapping_iter to copy data Greg Kroah-Hartman
` (89 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mauro Carvalho Chehab, Sasha Levin
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
[ Upstream commit 8db11aebdb8f93f46a8513c22c9bd52fa23263aa ]
The logic at dib8000_get_init_prbs() has a few issues:
1. the tables used there has an extra unused value at the beginning;
2. the dprintk() message doesn't write the right value when
transmission mode is not 8K;
3. the array overflow validation is done by the callers.
Rewrite the code to fix such issues.
This should also shut up those smatch warnings:
drivers/media/dvb-frontends/dib8000.c:2125 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_8k' 14 <= 14
drivers/media/dvb-frontends/dib8000.c:2129 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_2k' 14 <= 14
drivers/media/dvb-frontends/dib8000.c:2131 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_4k' 14 <= 14
drivers/media/dvb-frontends/dib8000.c:2134 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_8k' 14 <= 14
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/dvb-frontends/dib8000.c | 58 +++++++++++++++++++--------
1 file changed, 41 insertions(+), 17 deletions(-)
diff --git a/drivers/media/dvb-frontends/dib8000.c b/drivers/media/dvb-frontends/dib8000.c
index 5d9381509b07..59ab01dc62b1 100644
--- a/drivers/media/dvb-frontends/dib8000.c
+++ b/drivers/media/dvb-frontends/dib8000.c
@@ -2110,32 +2110,55 @@ static void dib8000_load_ana_fe_coefs(struct dib8000_state *state, const s16 *an
dib8000_write_word(state, 117 + mode, ana_fe[mode]);
}
-static const u16 lut_prbs_2k[14] = {
- 0, 0x423, 0x009, 0x5C7, 0x7A6, 0x3D8, 0x527, 0x7FF, 0x79B, 0x3D6, 0x3A2, 0x53B, 0x2F4, 0x213
+static const u16 lut_prbs_2k[13] = {
+ 0x423, 0x009, 0x5C7,
+ 0x7A6, 0x3D8, 0x527,
+ 0x7FF, 0x79B, 0x3D6,
+ 0x3A2, 0x53B, 0x2F4,
+ 0x213
};
-static const u16 lut_prbs_4k[14] = {
- 0, 0x208, 0x0C3, 0x7B9, 0x423, 0x5C7, 0x3D8, 0x7FF, 0x3D6, 0x53B, 0x213, 0x029, 0x0D0, 0x48E
+
+static const u16 lut_prbs_4k[13] = {
+ 0x208, 0x0C3, 0x7B9,
+ 0x423, 0x5C7, 0x3D8,
+ 0x7FF, 0x3D6, 0x53B,
+ 0x213, 0x029, 0x0D0,
+ 0x48E
};
-static const u16 lut_prbs_8k[14] = {
- 0, 0x740, 0x069, 0x7DD, 0x208, 0x7B9, 0x5C7, 0x7FF, 0x53B, 0x029, 0x48E, 0x4C4, 0x367, 0x684
+
+static const u16 lut_prbs_8k[13] = {
+ 0x740, 0x069, 0x7DD,
+ 0x208, 0x7B9, 0x5C7,
+ 0x7FF, 0x53B, 0x029,
+ 0x48E, 0x4C4, 0x367,
+ 0x684
};
static u16 dib8000_get_init_prbs(struct dib8000_state *state, u16 subchannel)
{
int sub_channel_prbs_group = 0;
+ int prbs_group;
- sub_channel_prbs_group = (subchannel / 3) + 1;
- dprintk("sub_channel_prbs_group = %d , subchannel =%d prbs = 0x%04x\n", sub_channel_prbs_group, subchannel, lut_prbs_8k[sub_channel_prbs_group]);
+ sub_channel_prbs_group = subchannel / 3;
+ if (sub_channel_prbs_group >= ARRAY_SIZE(lut_prbs_2k))
+ return 0;
switch (state->fe[0]->dtv_property_cache.transmission_mode) {
case TRANSMISSION_MODE_2K:
- return lut_prbs_2k[sub_channel_prbs_group];
+ prbs_group = lut_prbs_2k[sub_channel_prbs_group];
+ break;
case TRANSMISSION_MODE_4K:
- return lut_prbs_4k[sub_channel_prbs_group];
+ prbs_group = lut_prbs_4k[sub_channel_prbs_group];
+ break;
default:
case TRANSMISSION_MODE_8K:
- return lut_prbs_8k[sub_channel_prbs_group];
+ prbs_group = lut_prbs_8k[sub_channel_prbs_group];
}
+
+ dprintk("sub_channel_prbs_group = %d , subchannel =%d prbs = 0x%04x\n",
+ sub_channel_prbs_group, subchannel, prbs_group);
+
+ return prbs_group;
}
static void dib8000_set_13seg_channel(struct dib8000_state *state)
@@ -2412,10 +2435,8 @@ static void dib8000_set_isdbt_common_channel(struct dib8000_state *state, u8 seq
/* TSB or ISDBT ? apply it now */
if (c->isdbt_sb_mode) {
dib8000_set_sb_channel(state);
- if (c->isdbt_sb_subchannel < 14)
- init_prbs = dib8000_get_init_prbs(state, c->isdbt_sb_subchannel);
- else
- init_prbs = 0;
+ init_prbs = dib8000_get_init_prbs(state,
+ c->isdbt_sb_subchannel);
} else {
dib8000_set_13seg_channel(state);
init_prbs = 0xfff;
@@ -3007,6 +3028,7 @@ static int dib8000_tune(struct dvb_frontend *fe)
unsigned long *timeout = &state->timeout;
unsigned long now = jiffies;
+ u16 init_prbs;
#ifdef DIB8000_AGC_FREEZE
u16 agc1, agc2;
#endif
@@ -3305,8 +3327,10 @@ static int dib8000_tune(struct dvb_frontend *fe)
break;
case CT_DEMOD_STEP_11: /* 41 : init prbs autosearch */
- if (state->subchannel <= 41) {
- dib8000_set_subchannel_prbs(state, dib8000_get_init_prbs(state, state->subchannel));
+ init_prbs = dib8000_get_init_prbs(state, state->subchannel);
+
+ if (init_prbs) {
+ dib8000_set_subchannel_prbs(state, init_prbs);
*tune_state = CT_DEMOD_STEP_9;
} else {
*tune_state = CT_DEMOD_STOP;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 131/217] crypto: mxs-dcp - Use sg_mapping_iter to copy data
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (129 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 130/217] media: dib8000: rewrite the init prbs logic Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 132/217] PCI: Use pci_update_current_state() in pci_enable_device_flags() Greg Kroah-Hartman
` (88 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Anderson, Herbert Xu, Sasha Levin
From: Sean Anderson <sean.anderson@seco.com>
[ Upstream commit 2e6d793e1bf07fe5e20cfbbdcec9e1af7e5097eb ]
This uses the sg_pcopy_from_buffer to copy data, instead of doing it
ourselves.
In addition to reducing code size, this fixes the following oops
resulting from failing to kmap the page:
[ 68.896381] Unable to handle kernel NULL pointer dereference at virtual address 00000ab8
[ 68.904539] pgd = 3561adb3
[ 68.907475] [00000ab8] *pgd=00000000
[ 68.911153] Internal error: Oops: 805 [#1] ARM
[ 68.915618] Modules linked in: cfg80211 rfkill des_generic libdes arc4 libarc4 cbc ecb algif_skcipher sha256_generic libsha256 sha1_generic hmac aes_generic libaes cmac sha512_generic md5 md4 algif_hash af_alg i2c_imx i2c_core ci_hdrc_imx ci_hdrc mxs_dcp ulpi roles udc_core imx_sdma usbmisc_imx usb_common firmware_class virt_dma phy_mxs_usb nf_tables nfnetlink ip_tables x_tables ipv6 autofs4
[ 68.950741] CPU: 0 PID: 139 Comm: mxs_dcp_chan/ae Not tainted 5.10.34 #296
[ 68.958501] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[ 68.964710] PC is at memcpy+0xa8/0x330
[ 68.968479] LR is at 0xd7b2bc9d
[ 68.971638] pc : [<c053e7c8>] lr : [<d7b2bc9d>] psr: 000f0013
[ 68.977920] sp : c2cbbee4 ip : 00000010 fp : 00000010
[ 68.983159] r10: 00000000 r9 : c3283a40 r8 : 1a5a6f08
[ 68.988402] r7 : 4bfe0ecc r6 : 76d8a220 r5 : c32f9050 r4 : 00000001
[ 68.994945] r3 : 00000ab8 r2 : fffffff0 r1 : c32f9050 r0 : 00000ab8
[ 69.001492] Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 69.008646] Control: 10c53c7d Table: 83664059 DAC: 00000051
[ 69.014414] Process mxs_dcp_chan/ae (pid: 139, stack limit = 0x667b57ab)
[ 69.021133] Stack: (0xc2cbbee4 to 0xc2cbc000)
[ 69.025519] bee0: c32f9050 c3235408 00000010 00000010 00000ab8 00000001 bf10406c
[ 69.033720] bf00: 00000000 00000000 00000010 00000000 c32355d0 832fb080 00000000 c13de2fc
[ 69.041921] bf20: c3628010 00000010 c33d5780 00000ab8 bf1067e8 00000002 c21e5010 c2cba000
[ 69.050125] bf40: c32f8040 00000000 bf106a40 c32f9040 c3283a80 00000001 bf105240 c3234040
[ 69.058327] bf60: ffffe000 c3204100 c2c69800 c2cba000 00000000 bf103b84 00000000 c2eddc54
[ 69.066530] bf80: c3204144 c0140d1c c2cba000 c2c69800 c0140be8 00000000 00000000 00000000
[ 69.074730] bfa0: 00000000 00000000 00000000 c0100114 00000000 00000000 00000000 00000000
[ 69.082932] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 69.091131] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[ 69.099364] [<c053e7c8>] (memcpy) from [<bf10406c>] (dcp_chan_thread_aes+0x4e8/0x840 [mxs_dcp])
[ 69.108117] [<bf10406c>] (dcp_chan_thread_aes [mxs_dcp]) from [<c0140d1c>] (kthread+0x134/0x160)
[ 69.116941] [<c0140d1c>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20)
[ 69.124178] Exception stack(0xc2cbbfb0 to 0xc2cbbff8)
[ 69.129250] bfa0: 00000000 00000000 00000000 00000000
[ 69.137450] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 69.145648] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 69.152289] Code: e320f000 e4803004 e4804004 e4805004 (e4806004)
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/mxs-dcp.c | 36 +++++++++---------------------------
1 file changed, 9 insertions(+), 27 deletions(-)
diff --git a/drivers/crypto/mxs-dcp.c b/drivers/crypto/mxs-dcp.c
index 96b6808847c7..e986be405411 100644
--- a/drivers/crypto/mxs-dcp.c
+++ b/drivers/crypto/mxs-dcp.c
@@ -297,21 +297,20 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
struct scatterlist *dst = req->dst;
struct scatterlist *src = req->src;
- const int nents = sg_nents(req->src);
+ int dst_nents = sg_nents(dst);
const int out_off = DCP_BUF_SZ;
uint8_t *in_buf = sdcp->coh->aes_in_buf;
uint8_t *out_buf = sdcp->coh->aes_out_buf;
- uint8_t *out_tmp, *src_buf, *dst_buf = NULL;
uint32_t dst_off = 0;
+ uint8_t *src_buf = NULL;
uint32_t last_out_len = 0;
uint8_t *key = sdcp->coh->aes_key;
int ret = 0;
- int split = 0;
- unsigned int i, len, clen, rem = 0, tlen = 0;
+ unsigned int i, len, clen, tlen = 0;
int init = 0;
bool limit_hit = false;
@@ -329,7 +328,7 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
memset(key + AES_KEYSIZE_128, 0, AES_KEYSIZE_128);
}
- for_each_sg(req->src, src, nents, i) {
+ for_each_sg(req->src, src, sg_nents(src), i) {
src_buf = sg_virt(src);
len = sg_dma_len(src);
tlen += len;
@@ -354,34 +353,17 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
* submit the buffer.
*/
if (actx->fill == out_off || sg_is_last(src) ||
- limit_hit) {
+ limit_hit) {
ret = mxs_dcp_run_aes(actx, req, init);
if (ret)
return ret;
init = 0;
- out_tmp = out_buf;
+ sg_pcopy_from_buffer(dst, dst_nents, out_buf,
+ actx->fill, dst_off);
+ dst_off += actx->fill;
last_out_len = actx->fill;
- while (dst && actx->fill) {
- if (!split) {
- dst_buf = sg_virt(dst);
- dst_off = 0;
- }
- rem = min(sg_dma_len(dst) - dst_off,
- actx->fill);
-
- memcpy(dst_buf + dst_off, out_tmp, rem);
- out_tmp += rem;
- dst_off += rem;
- actx->fill -= rem;
-
- if (dst_off == sg_dma_len(dst)) {
- dst = sg_next(dst);
- split = 0;
- } else {
- split = 1;
- }
- }
+ actx->fill = 0;
}
} while (len);
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 132/217] PCI: Use pci_update_current_state() in pci_enable_device_flags()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (130 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 131/217] crypto: mxs-dcp - Use sg_mapping_iter to copy data Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 133/217] iio: dac: ad5624r: Fix incorrect handling of an optional regulator Greg Kroah-Hartman
` (87 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Maximilian Luz, Rafael J. Wysocki,
Sasha Levin
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ Upstream commit 14858dcc3b3587f4bb5c48e130ee7d68fc2b0a29 ]
Updating the current_state field of struct pci_dev the way it is done
in pci_enable_device_flags() before calling do_pci_enable_device() may
not work. For example, if the given PCI device depends on an ACPI
power resource whose _STA method initially returns 0 ("off"), but the
config space of the PCI device is accessible and the power state
retrieved from the PCI_PM_CTRL register is D0, the current_state
field in the struct pci_dev representing that device will get out of
sync with the power.state of its ACPI companion object and that will
lead to power management issues going forward.
To avoid such issues, make pci_enable_device_flags() call
pci_update_current_state() which takes ACPI device power management
into account, if present, to retrieve the current power state of the
device.
Link: https://lore.kernel.org/lkml/20210314000439.3138941-1-luzmaximilian@gmail.com/
Reported-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/pci.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 1c5c0937c5da..4ff7f2575d28 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1384,11 +1384,7 @@ static int pci_enable_device_flags(struct pci_dev *dev, unsigned long flags)
* so that things like MSI message writing will behave as expected
* (e.g. if the device really is in D0 at enable time).
*/
- if (dev->pm_cap) {
- u16 pmcsr;
- pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
- dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
- }
+ pci_update_current_state(dev, dev->current_state);
if (atomic_inc_return(&dev->enable_cnt) > 1)
return 0; /* already enabled */
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 133/217] iio: dac: ad5624r: Fix incorrect handling of an optional regulator.
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (131 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 132/217] PCI: Use pci_update_current_state() in pci_enable_device_flags() Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 134/217] ARM: dts: qcom: apq8064: correct clock names Greg Kroah-Hartman
` (86 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jonathan Cameron, kernel test robot,
Nuno Sá,
Sasha Levin
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ Upstream commit 97683c851f9cdbd3ea55697cbe2dcb6af4287bbd ]
The naming of the regulator is problematic. VCC is usually a supply
voltage whereas these devices have a separate VREF pin.
Secondly, the regulator core might have provided a stub regulator if
a real regulator wasn't provided. That would in turn have failed to
provide a voltage when queried. So reality was that there was no way
to use the internal reference.
In order to avoid breaking any dts out in the wild, make sure to fallback
to the original vcc naming if vref is not available.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210627163244.1090296-9-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/dac/ad5624r_spi.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/dac/ad5624r_spi.c b/drivers/iio/dac/ad5624r_spi.c
index 5489ec43b95d..e5cefdb674f8 100644
--- a/drivers/iio/dac/ad5624r_spi.c
+++ b/drivers/iio/dac/ad5624r_spi.c
@@ -231,7 +231,7 @@ static int ad5624r_probe(struct spi_device *spi)
if (!indio_dev)
return -ENOMEM;
st = iio_priv(indio_dev);
- st->reg = devm_regulator_get(&spi->dev, "vcc");
+ st->reg = devm_regulator_get_optional(&spi->dev, "vref");
if (!IS_ERR(st->reg)) {
ret = regulator_enable(st->reg);
if (ret)
@@ -242,6 +242,22 @@ static int ad5624r_probe(struct spi_device *spi)
goto error_disable_reg;
voltage_uv = ret;
+ } else {
+ if (PTR_ERR(st->reg) != -ENODEV)
+ return PTR_ERR(st->reg);
+ /* Backwards compatibility. This naming is not correct */
+ st->reg = devm_regulator_get_optional(&spi->dev, "vcc");
+ if (!IS_ERR(st->reg)) {
+ ret = regulator_enable(st->reg);
+ if (ret)
+ return ret;
+
+ ret = regulator_get_voltage(st->reg);
+ if (ret < 0)
+ goto error_disable_reg;
+
+ voltage_uv = ret;
+ }
}
spi_set_drvdata(spi, indio_dev);
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 134/217] ARM: dts: qcom: apq8064: correct clock names
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (132 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 133/217] iio: dac: ad5624r: Fix incorrect handling of an optional regulator Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 135/217] video: fbdev: kyro: fix a DoS bug by restricting user input Greg Kroah-Hartman
` (85 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Brian Masney, David Heidelberg,
Bjorn Andersson, Sasha Levin
From: David Heidelberg <david@ixit.cz>
[ Upstream commit 0dc6c59892ead17a9febd11202c9f6794aac1895 ]
Since new code doesn't take old clk names in account, it does fixes
error:
msm_dsi 4700000.mdss_dsi: dev_pm_opp_set_clkname: Couldn't find clock: -2
and following kernel oops introduced by
b0530eb1191 ("drm/msm/dpu: Use OPP API to set clk/perf state").
Also removes warning about deprecated clock names.
Tested against linux-5.10.y LTS on Nexus 7 2013.
Reviewed-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210707131453.24041-1-david@ixit.cz
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 6089c8d56cd5..eef243998392 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1228,9 +1228,9 @@ dsi0: mdss_dsi@4700000 {
<&mmcc DSI1_BYTE_CLK>,
<&mmcc DSI_PIXEL_CLK>,
<&mmcc DSI1_ESC_CLK>;
- clock-names = "iface_clk", "bus_clk", "core_mmss_clk",
- "src_clk", "byte_clk", "pixel_clk",
- "core_clk";
+ clock-names = "iface", "bus", "core_mmss",
+ "src", "byte", "pixel",
+ "core";
assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
<&mmcc DSI1_ESC_SRC>,
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 135/217] video: fbdev: kyro: fix a DoS bug by restricting user input
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (133 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 134/217] ARM: dts: qcom: apq8064: correct clock names Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 136/217] netlink: Deal with ESRCH error in nlmsg_notify() Greg Kroah-Hartman
` (84 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zheyu Ma, Sam Ravnborg, Sasha Levin
From: Zheyu Ma <zheyuma97@gmail.com>
[ Upstream commit 98a65439172dc69cb16834e62e852afc2adb83ed ]
The user can pass in any value to the driver through the 'ioctl'
interface. The driver dost not check, which may cause DoS bugs.
The following log reveals it:
divide error: 0000 [#1] PREEMPT SMP KASAN PTI
RIP: 0010:SetOverlayViewPort+0x133/0x5f0 drivers/video/fbdev/kyro/STG4000OverlayDevice.c:476
Call Trace:
kyro_dev_overlay_viewport_set drivers/video/fbdev/kyro/fbdev.c:378 [inline]
kyrofb_ioctl+0x2eb/0x330 drivers/video/fbdev/kyro/fbdev.c:603
do_fb_ioctl+0x1f3/0x700 drivers/video/fbdev/core/fbmem.c:1171
fb_ioctl+0xeb/0x130 drivers/video/fbdev/core/fbmem.c:1185
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x19b/0x220 fs/ioctl.c:739
do_syscall_64+0x32/0x80 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1626235762-2590-1-git-send-email-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/kyro/fbdev.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/video/fbdev/kyro/fbdev.c b/drivers/video/fbdev/kyro/fbdev.c
index a7bd9f25911b..d7aa431e6846 100644
--- a/drivers/video/fbdev/kyro/fbdev.c
+++ b/drivers/video/fbdev/kyro/fbdev.c
@@ -372,6 +372,11 @@ static int kyro_dev_overlay_viewport_set(u32 x, u32 y, u32 ulWidth, u32 ulHeight
/* probably haven't called CreateOverlay yet */
return -EINVAL;
+ if (ulWidth == 0 || ulWidth == 0xffffffff ||
+ ulHeight == 0 || ulHeight == 0xffffffff ||
+ (x < 2 && ulWidth + 2 == 0))
+ return -EINVAL;
+
/* Stop Ramdac Output */
DisableRamdacOutput(deviceInfo.pSTGReg);
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 136/217] netlink: Deal with ESRCH error in nlmsg_notify()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (134 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 135/217] video: fbdev: kyro: fix a DoS bug by restricting user input Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 137/217] Smack: Fix wrong semantics in smk_access_entry() Greg Kroah-Hartman
` (83 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yonghong Song, Yajun Deng,
Jakub Kicinski, Sasha Levin
From: Yajun Deng <yajun.deng@linux.dev>
[ Upstream commit fef773fc8110d8124c73a5e6610f89e52814637d ]
Yonghong Song report:
The bpf selftest tc_bpf failed with latest bpf-next.
The following is the command to run and the result:
$ ./test_progs -n 132
[ 40.947571] bpf_testmod: loading out-of-tree module taints kernel.
test_tc_bpf:PASS:test_tc_bpf__open_and_load 0 nsec
test_tc_bpf:PASS:bpf_tc_hook_create(BPF_TC_INGRESS) 0 nsec
test_tc_bpf:PASS:bpf_tc_hook_create invalid hook.attach_point 0 nsec
test_tc_bpf_basic:PASS:bpf_obj_get_info_by_fd 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_attach 0 nsec
test_tc_bpf_basic:PASS:handle set 0 nsec
test_tc_bpf_basic:PASS:priority set 0 nsec
test_tc_bpf_basic:PASS:prog_id set 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_attach replace mode 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_query 0 nsec
test_tc_bpf_basic:PASS:handle set 0 nsec
test_tc_bpf_basic:PASS:priority set 0 nsec
test_tc_bpf_basic:PASS:prog_id set 0 nsec
libbpf: Kernel error message: Failed to send filter delete notification
test_tc_bpf_basic:FAIL:bpf_tc_detach unexpected error: -3 (errno 3)
test_tc_bpf:FAIL:test_tc_internal ingress unexpected error: -3 (errno 3)
The failure seems due to the commit
cfdf0d9ae75b ("rtnetlink: use nlmsg_notify() in rtnetlink_send()")
Deal with ESRCH error in nlmsg_notify() even the report variable is zero.
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Link: https://lore.kernel.org/r/20210719051816.11762-1-yajun.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netlink/af_netlink.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 140bec3568ec..955041c54702 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -2476,13 +2476,15 @@ int nlmsg_notify(struct sock *sk, struct sk_buff *skb, u32 portid,
/* errors reported via destination sk->sk_err, but propagate
* delivery errors if NETLINK_BROADCAST_ERROR flag is set */
err = nlmsg_multicast(sk, skb, exclude_portid, group, flags);
+ if (err == -ESRCH)
+ err = 0;
}
if (report) {
int err2;
err2 = nlmsg_unicast(sk, skb, portid);
- if (!err || err == -ESRCH)
+ if (!err)
err = err2;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 137/217] Smack: Fix wrong semantics in smk_access_entry()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (135 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 136/217] netlink: Deal with ESRCH error in nlmsg_notify() Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 138/217] usb: host: fotg210: fix the endpoints transactional opportunities calculation Greg Kroah-Hartman
` (82 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tianjia Zhang, Casey Schaufler, Sasha Levin
From: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
[ Upstream commit 6d14f5c7028eea70760df284057fe198ce7778dd ]
In the smk_access_entry() function, if no matching rule is found
in the rust_list, a negative error code will be used to perform bit
operations with the MAY_ enumeration value. This is semantically
wrong. This patch fixes this issue.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
security/smack/smack_access.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/security/smack/smack_access.c b/security/smack/smack_access.c
index a9c20821a726..c8e82d6a12b5 100644
--- a/security/smack/smack_access.c
+++ b/security/smack/smack_access.c
@@ -85,23 +85,22 @@ int log_policy = SMACK_AUDIT_DENIED;
int smk_access_entry(char *subject_label, char *object_label,
struct list_head *rule_list)
{
- int may = -ENOENT;
struct smack_rule *srp;
list_for_each_entry_rcu(srp, rule_list, list) {
if (srp->smk_object->smk_known == object_label &&
srp->smk_subject->smk_known == subject_label) {
- may = srp->smk_access;
- break;
+ int may = srp->smk_access;
+ /*
+ * MAY_WRITE implies MAY_LOCK.
+ */
+ if ((may & MAY_WRITE) == MAY_WRITE)
+ may |= MAY_LOCK;
+ return may;
}
}
- /*
- * MAY_WRITE implies MAY_LOCK.
- */
- if ((may & MAY_WRITE) == MAY_WRITE)
- may |= MAY_LOCK;
- return may;
+ return -ENOENT;
}
/**
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 138/217] usb: host: fotg210: fix the endpoints transactional opportunities calculation
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (136 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 137/217] Smack: Fix wrong semantics in smk_access_entry() Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 139/217] usb: host: fotg210: fix the actual_length of an iso packet Greg Kroah-Hartman
` (81 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Kelly Devilliv, Sasha Levin
From: Kelly Devilliv <kelly.devilliv@gmail.com>
[ Upstream commit c2e898764245c852bc8ee4857613ba4f3a6d761d ]
Now that usb_endpoint_maxp() only returns the lowest
11 bits from wMaxPacketSize, we should make use of the
usb_endpoint_* helpers instead and remove the unnecessary
max_packet()/hb_mult() macro.
Signed-off-by: Kelly Devilliv <kelly.devilliv@gmail.com>
Link: https://lore.kernel.org/r/20210627125747.127646-3-kelly.devilliv@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/host/fotg210-hcd.c | 36 ++++++++++++++++------------------
1 file changed, 17 insertions(+), 19 deletions(-)
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index bbe1ea00d887..849816ab5b77 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -2536,11 +2536,6 @@ static unsigned qh_completions(struct fotg210_hcd *fotg210,
return count;
}
-/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
-#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
-/* ... and packet size, for any kind of endpoint descriptor */
-#define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
-
/* reverse of qh_urb_transaction: free a list of TDs.
* used for cleanup after errors, before HC sees an URB's TDs.
*/
@@ -2626,7 +2621,7 @@ static struct list_head *qh_urb_transaction(struct fotg210_hcd *fotg210,
token |= (1 /* "in" */ << 8);
/* else it's already initted to "out" pid (0 << 8) */
- maxpacket = max_packet(usb_maxpacket(urb->dev, urb->pipe, !is_input));
+ maxpacket = usb_maxpacket(urb->dev, urb->pipe, !is_input);
/*
* buffer gets wrapped in one or more qtds;
@@ -2740,9 +2735,11 @@ static struct fotg210_qh *qh_make(struct fotg210_hcd *fotg210, struct urb *urb,
gfp_t flags)
{
struct fotg210_qh *qh = fotg210_qh_alloc(fotg210, flags);
+ struct usb_host_endpoint *ep;
u32 info1 = 0, info2 = 0;
int is_input, type;
int maxp = 0;
+ int mult;
struct usb_tt *tt = urb->dev->tt;
struct fotg210_qh_hw *hw;
@@ -2757,14 +2754,15 @@ static struct fotg210_qh *qh_make(struct fotg210_hcd *fotg210, struct urb *urb,
is_input = usb_pipein(urb->pipe);
type = usb_pipetype(urb->pipe);
- maxp = usb_maxpacket(urb->dev, urb->pipe, !is_input);
+ ep = usb_pipe_endpoint(urb->dev, urb->pipe);
+ maxp = usb_endpoint_maxp(&ep->desc);
+ mult = usb_endpoint_maxp_mult(&ep->desc);
/* 1024 byte maxpacket is a hardware ceiling. High bandwidth
* acts like up to 3KB, but is built from smaller packets.
*/
- if (max_packet(maxp) > 1024) {
- fotg210_dbg(fotg210, "bogus qh maxpacket %d\n",
- max_packet(maxp));
+ if (maxp > 1024) {
+ fotg210_dbg(fotg210, "bogus qh maxpacket %d\n", maxp);
goto done;
}
@@ -2778,8 +2776,7 @@ static struct fotg210_qh *qh_make(struct fotg210_hcd *fotg210, struct urb *urb,
*/
if (type == PIPE_INTERRUPT) {
qh->usecs = NS_TO_US(usb_calc_bus_time(USB_SPEED_HIGH,
- is_input, 0,
- hb_mult(maxp) * max_packet(maxp)));
+ is_input, 0, mult * maxp));
qh->start = NO_FRAME;
if (urb->dev->speed == USB_SPEED_HIGH) {
@@ -2816,7 +2813,7 @@ static struct fotg210_qh *qh_make(struct fotg210_hcd *fotg210, struct urb *urb,
think_time = tt ? tt->think_time : 0;
qh->tt_usecs = NS_TO_US(think_time +
usb_calc_bus_time(urb->dev->speed,
- is_input, 0, max_packet(maxp)));
+ is_input, 0, maxp));
qh->period = urb->interval;
if (qh->period > fotg210->periodic_size) {
qh->period = fotg210->periodic_size;
@@ -2879,11 +2876,11 @@ static struct fotg210_qh *qh_make(struct fotg210_hcd *fotg210, struct urb *urb,
* to help them do so. So now people expect to use
* such nonconformant devices with Linux too; sigh.
*/
- info1 |= max_packet(maxp) << 16;
+ info1 |= maxp << 16;
info2 |= (FOTG210_TUNE_MULT_HS << 30);
} else { /* PIPE_INTERRUPT */
- info1 |= max_packet(maxp) << 16;
- info2 |= hb_mult(maxp) << 30;
+ info1 |= maxp << 16;
+ info2 |= mult << 30;
}
break;
default:
@@ -3953,6 +3950,7 @@ static void iso_stream_init(struct fotg210_hcd *fotg210,
int is_input;
long bandwidth;
unsigned multi;
+ struct usb_host_endpoint *ep;
/*
* this might be a "high bandwidth" highspeed endpoint,
@@ -3960,14 +3958,14 @@ static void iso_stream_init(struct fotg210_hcd *fotg210,
*/
epnum = usb_pipeendpoint(pipe);
is_input = usb_pipein(pipe) ? USB_DIR_IN : 0;
- maxp = usb_maxpacket(dev, pipe, !is_input);
+ ep = usb_pipe_endpoint(dev, pipe);
+ maxp = usb_endpoint_maxp(&ep->desc);
if (is_input)
buf1 = (1 << 11);
else
buf1 = 0;
- maxp = max_packet(maxp);
- multi = hb_mult(maxp);
+ multi = usb_endpoint_maxp_mult(&ep->desc);
buf1 |= maxp;
maxp *= multi;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 139/217] usb: host: fotg210: fix the actual_length of an iso packet
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (137 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 138/217] usb: host: fotg210: fix the endpoints transactional opportunities calculation Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 140/217] usb: gadget: u_ether: fix a potential null pointer dereference Greg Kroah-Hartman
` (80 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Kelly Devilliv, Sasha Levin
From: Kelly Devilliv <kelly.devilliv@gmail.com>
[ Upstream commit 091cb2f782f32ab68c6f5f326d7868683d3d4875 ]
We should acquire the actual_length of an iso packet
from the iTD directly using FOTG210_ITD_LENGTH() macro.
Signed-off-by: Kelly Devilliv <kelly.devilliv@gmail.com>
Link: https://lore.kernel.org/r/20210627125747.127646-4-kelly.devilliv@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/host/fotg210-hcd.c | 5 ++---
drivers/usb/host/fotg210.h | 5 -----
2 files changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 849816ab5b77..3008d692000a 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -4487,13 +4487,12 @@ static bool itd_complete(struct fotg210_hcd *fotg210, struct fotg210_itd *itd)
/* HC need not update length with this error */
if (!(t & FOTG210_ISOC_BABBLE)) {
- desc->actual_length =
- fotg210_itdlen(urb, desc, t);
+ desc->actual_length = FOTG210_ITD_LENGTH(t);
urb->actual_length += desc->actual_length;
}
} else if (likely((t & FOTG210_ISOC_ACTIVE) == 0)) {
desc->status = 0;
- desc->actual_length = fotg210_itdlen(urb, desc, t);
+ desc->actual_length = FOTG210_ITD_LENGTH(t);
urb->actual_length += desc->actual_length;
} else {
/* URB was too late */
diff --git a/drivers/usb/host/fotg210.h b/drivers/usb/host/fotg210.h
index 7fcd785c7bc8..0f1da9503bc6 100644
--- a/drivers/usb/host/fotg210.h
+++ b/drivers/usb/host/fotg210.h
@@ -683,11 +683,6 @@ static inline unsigned fotg210_read_frame_index(struct fotg210_hcd *fotg210)
return fotg210_readl(fotg210, &fotg210->regs->frame_index);
}
-#define fotg210_itdlen(urb, desc, t) ({ \
- usb_pipein((urb)->pipe) ? \
- (desc)->length - FOTG210_ITD_LENGTH(t) : \
- FOTG210_ITD_LENGTH(t); \
-})
/*-------------------------------------------------------------------------*/
#endif /* __LINUX_FOTG210_H */
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 140/217] usb: gadget: u_ether: fix a potential null pointer dereference
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (138 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 139/217] usb: host: fotg210: fix the actual_length of an iso packet Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 141/217] usb: gadget: composite: Allow bMaxPower=0 if self-powered Greg Kroah-Hartman
` (79 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Brooke Basile, Bryan ODonoghue,
Felipe Balbi, Lorenzo Colitti, Maciej Żenczykowski,
Sasha Levin
From: Maciej Żenczykowski <maze@google.com>
[ Upstream commit 8ae01239609b29ec2eff55967c8e0fe3650cfa09 ]
f_ncm tx timeout can call us with null skb to flush
a pending frame. In this case skb is NULL to begin
with but ceases to be null after dev->wrap() completes.
In such a case in->maxpacket will be read, even though
we've failed to check that 'in' is not NULL.
Though I've never observed this fail in practice,
however the 'flush operation' simply does not make sense with
a null usb IN endpoint - there's nowhere to flush to...
(note that we're the gadget/device, and IN is from the point
of view of the host, so here IN actually means outbound...)
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210701114834.884597-6-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/function/u_ether.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 989682cc8686..38a35f57b22c 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -495,8 +495,9 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
}
spin_unlock_irqrestore(&dev->lock, flags);
- if (skb && !in) {
- dev_kfree_skb_any(skb);
+ if (!in) {
+ if (skb)
+ dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 141/217] usb: gadget: composite: Allow bMaxPower=0 if self-powered
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (139 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 140/217] usb: gadget: u_ether: fix a potential null pointer dereference Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 142/217] staging: board: Fix uninitialized spinlock when attaching genpd Greg Kroah-Hartman
` (78 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Felipe Balbi, Ronak Vijay Raheja,
Jack Pham, Sasha Levin
From: Jack Pham <jackp@codeaurora.org>
[ Upstream commit bcacbf06c891374e7fdd7b72d11cda03b0269b43 ]
Currently the composite driver encodes the MaxPower field of
the configuration descriptor by reading the c->MaxPower of the
usb_configuration only if it is non-zero, otherwise it falls back
to using the value hard-coded in CONFIG_USB_GADGET_VBUS_DRAW.
However, there are cases when a configuration must explicitly set
bMaxPower to 0, particularly if its bmAttributes also has the
Self-Powered bit set, which is a valid combination.
This is specifically called out in the USB PD specification section
9.1, in which a PDUSB device "shall report zero in the bMaxPower
field after negotiating a mutually agreeable Contract", and also
verified by the USB Type-C Functional Test TD.4.10.2 Sink Power
Precedence Test.
The fix allows the c->MaxPower to be used for encoding the bMaxPower
even if it is 0, if the self-powered bit is also set. An example
usage of this would be for a ConfigFS gadget to be dynamically
updated by userspace when the Type-C connection is determined to be
operating in Power Delivery mode.
Co-developed-by: Ronak Vijay Raheja <rraheja@codeaurora.org>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Ronak Vijay Raheja <rraheja@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210720080907.30292-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/composite.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 6696fdd97530..49806837b98b 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -484,7 +484,7 @@ static u8 encode_bMaxPower(enum usb_device_speed speed,
{
unsigned val;
- if (c->MaxPower)
+ if (c->MaxPower || (c->bmAttributes & USB_CONFIG_ATT_SELFPOWER))
val = c->MaxPower;
else
val = CONFIG_USB_GADGET_VBUS_DRAW;
@@ -894,7 +894,11 @@ static int set_config(struct usb_composite_dev *cdev,
}
/* when we return, be sure our power usage is valid */
- power = c->MaxPower ? c->MaxPower : CONFIG_USB_GADGET_VBUS_DRAW;
+ if (c->MaxPower || (c->bmAttributes & USB_CONFIG_ATT_SELFPOWER))
+ power = c->MaxPower;
+ else
+ power = CONFIG_USB_GADGET_VBUS_DRAW;
+
if (gadget->speed < USB_SPEED_SUPER)
power = min(power, 500U);
else
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 142/217] staging: board: Fix uninitialized spinlock when attaching genpd
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (140 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 141/217] usb: gadget: composite: Allow bMaxPower=0 if self-powered Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 143/217] tty: serial: jsm: hold port lock when reporting modem line changes Greg Kroah-Hartman
` (77 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Geert Uytterhoeven, Sasha Levin
From: Geert Uytterhoeven <geert+renesas@glider.be>
[ Upstream commit df00609821bf17f50a75a446266d19adb8339d84 ]
On Armadillo-800-EVA with CONFIG_DEBUG_SPINLOCK=y:
BUG: spinlock bad magic on CPU#0, swapper/1
lock: lcdc0_device+0x10c/0x308, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
CPU: 0 PID: 1 Comm: swapper Not tainted 5.11.0-rc5-armadillo-00036-gbbca04be7a80-dirty #287
Hardware name: Generic R8A7740 (Flattened Device Tree)
[<c010c3c8>] (unwind_backtrace) from [<c010a49c>] (show_stack+0x10/0x14)
[<c010a49c>] (show_stack) from [<c0159534>] (do_raw_spin_lock+0x20/0x94)
[<c0159534>] (do_raw_spin_lock) from [<c040858c>] (dev_pm_get_subsys_data+0x8c/0x11c)
[<c040858c>] (dev_pm_get_subsys_data) from [<c05fbcac>] (genpd_add_device+0x78/0x2b8)
[<c05fbcac>] (genpd_add_device) from [<c0412db4>] (of_genpd_add_device+0x34/0x4c)
[<c0412db4>] (of_genpd_add_device) from [<c0a1ea74>] (board_staging_register_device+0x11c/0x148)
[<c0a1ea74>] (board_staging_register_device) from [<c0a1eac4>] (board_staging_register_devices+0x24/0x28)
of_genpd_add_device() is called before platform_device_register(), as it
needs to attach the genpd before the device is probed. But the spinlock
is only initialized when the device is registered.
Fix this by open-coding the spinlock initialization, cfr.
device_pm_init_common() in the internal drivers/base code, and in the
SuperH early platform code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/57783ece7ddae55f2bda2f59f452180bff744ea0.1626257398.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/board/board.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/board/board.c b/drivers/staging/board/board.c
index 86dc41101610..1e2b33912a8a 100644
--- a/drivers/staging/board/board.c
+++ b/drivers/staging/board/board.c
@@ -139,6 +139,7 @@ int __init board_staging_register_clock(const struct board_staging_clk *bsc)
static int board_staging_add_dev_domain(struct platform_device *pdev,
const char *domain)
{
+ struct device *dev = &pdev->dev;
struct of_phandle_args pd_args;
struct device_node *np;
@@ -151,7 +152,11 @@ static int board_staging_add_dev_domain(struct platform_device *pdev,
pd_args.np = np;
pd_args.args_count = 0;
- return of_genpd_add_device(&pd_args, &pdev->dev);
+ /* Initialization similar to device_pm_init_common() */
+ spin_lock_init(&dev->power.lock);
+ dev->power.early_init = true;
+
+ return of_genpd_add_device(&pd_args, dev);
}
#else
static inline int board_staging_add_dev_domain(struct platform_device *pdev,
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 143/217] tty: serial: jsm: hold port lock when reporting modem line changes
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (141 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 142/217] staging: board: Fix uninitialized spinlock when attaching genpd Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 144/217] bpf/tests: Fix copy-and-paste error in double word test Greg Kroah-Hartman
` (76 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Zheyu Ma, Sasha Levin
From: Zheyu Ma <zheyuma97@gmail.com>
[ Upstream commit 240e126c28df084222f0b661321e8e3ecb0d232e ]
uart_handle_dcd_change() requires a port lock to be held and will emit a
warning when lockdep is enabled.
Held corresponding lock to fix the following warnings.
[ 132.528648] WARNING: CPU: 5 PID: 11600 at drivers/tty/serial/serial_core.c:3046 uart_handle_dcd_change+0xf4/0x120
[ 132.530482] Modules linked in:
[ 132.531050] CPU: 5 PID: 11600 Comm: jsm Not tainted 5.14.0-rc1-00003-g7fef2edf7cc7-dirty #31
[ 132.535268] RIP: 0010:uart_handle_dcd_change+0xf4/0x120
[ 132.557100] Call Trace:
[ 132.557562] ? __free_pages+0x83/0xb0
[ 132.558213] neo_parse_modem+0x156/0x220
[ 132.558897] neo_param+0x399/0x840
[ 132.559495] jsm_tty_open+0x12f/0x2d0
[ 132.560131] uart_startup.part.18+0x153/0x340
[ 132.560888] ? lock_is_held_type+0xe9/0x140
[ 132.561660] uart_port_activate+0x7f/0xe0
[ 132.562351] ? uart_startup.part.18+0x340/0x340
[ 132.563003] tty_port_open+0x8d/0xf0
[ 132.563523] ? uart_set_options+0x1e0/0x1e0
[ 132.564125] uart_open+0x24/0x40
[ 132.564604] tty_open+0x15c/0x630
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/1626242003-3809-1-git-send-email-zheyuma97@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/jsm/jsm_neo.c | 2 ++
drivers/tty/serial/jsm/jsm_tty.c | 3 +++
2 files changed, 5 insertions(+)
diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index c6fdd6369534..96e01bf4599c 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -827,7 +827,9 @@ static void neo_parse_isr(struct jsm_board *brd, u32 port)
/* Parse any modem signal changes */
jsm_dbg(INTR, &ch->ch_bd->pci_dev,
"MOD_STAT: sending to parse_modem_sigs\n");
+ spin_lock_irqsave(&ch->uart_port.lock, lock_flags);
neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr));
+ spin_unlock_irqrestore(&ch->uart_port.lock, lock_flags);
}
}
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index ec7d8383900f..7c790ff6b511 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -195,6 +195,7 @@ static void jsm_tty_break(struct uart_port *port, int break_state)
static int jsm_tty_open(struct uart_port *port)
{
+ unsigned long lock_flags;
struct jsm_board *brd;
struct jsm_channel *channel =
container_of(port, struct jsm_channel, uart_port);
@@ -248,6 +249,7 @@ static int jsm_tty_open(struct uart_port *port)
channel->ch_cached_lsr = 0;
channel->ch_stops_sent = 0;
+ spin_lock_irqsave(&port->lock, lock_flags);
termios = &port->state->port.tty->termios;
channel->ch_c_cflag = termios->c_cflag;
channel->ch_c_iflag = termios->c_iflag;
@@ -267,6 +269,7 @@ static int jsm_tty_open(struct uart_port *port)
jsm_carrier(channel);
channel->ch_open_count++;
+ spin_unlock_irqrestore(&port->lock, lock_flags);
jsm_dbg(OPEN, &channel->ch_bd->pci_dev, "finish\n");
return 0;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 144/217] bpf/tests: Fix copy-and-paste error in double word test
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (142 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 143/217] tty: serial: jsm: hold port lock when reporting modem line changes Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 145/217] bpf/tests: Do not PASS tests without actually testing the result Greg Kroah-Hartman
` (75 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Johan Almbladh, Andrii Nakryiko, Sasha Levin
From: Johan Almbladh <johan.almbladh@anyfinetworks.com>
[ Upstream commit ae7f47041d928b1a2f28717d095b4153c63cbf6a ]
This test now operates on DW as stated instead of W, which was
already covered by another test.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210721104058.3755254-1-johan.almbladh@anyfinetworks.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
lib/test_bpf.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index 75ebf2bbc2ee..4aa88ba8238c 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -4395,8 +4395,8 @@ static struct bpf_test tests[] = {
.u.insns_int = {
BPF_LD_IMM64(R0, 0),
BPF_LD_IMM64(R1, 0xffffffffffffffffLL),
- BPF_STX_MEM(BPF_W, R10, R1, -40),
- BPF_LDX_MEM(BPF_W, R0, R10, -40),
+ BPF_STX_MEM(BPF_DW, R10, R1, -40),
+ BPF_LDX_MEM(BPF_DW, R0, R10, -40),
BPF_EXIT_INSN(),
},
INTERNAL,
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 145/217] bpf/tests: Do not PASS tests without actually testing the result
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (143 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 144/217] bpf/tests: Fix copy-and-paste error in double word test Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 146/217] video: fbdev: asiliantfb: Error out if pixclock equals zero Greg Kroah-Hartman
` (74 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Johan Almbladh, Andrii Nakryiko, Sasha Levin
From: Johan Almbladh <johan.almbladh@anyfinetworks.com>
[ Upstream commit 2b7e9f25e590726cca76700ebdb10e92a7a72ca1 ]
Each test case can have a set of sub-tests, where each sub-test can
run the cBPF/eBPF test snippet with its own data_size and expected
result. Before, the end of the sub-test array was indicated by both
data_size and result being zero. However, most or all of the internal
eBPF tests has a data_size of zero already. When such a test also had
an expected value of zero, the test was never run but reported as
PASS anyway.
Now the test runner always runs the first sub-test, regardless of the
data_size and result values. The sub-test array zero-termination only
applies for any additional sub-tests.
There are other ways fix it of course, but this solution at least
removes the surprise of eBPF tests with a zero result always succeeding.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210721103822.3755111-1-johan.almbladh@anyfinetworks.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
lib/test_bpf.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index 4aa88ba8238c..9a8f957ad86e 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -6306,7 +6306,14 @@ static int run_one(const struct bpf_prog *fp, struct bpf_test *test)
u64 duration;
u32 ret;
- if (test->test[i].data_size == 0 &&
+ /*
+ * NOTE: Several sub-tests may be present, in which case
+ * a zero {data_size, result} tuple indicates the end of
+ * the sub-test array. The first test is always run,
+ * even if both data_size and result happen to be zero.
+ */
+ if (i > 0 &&
+ test->test[i].data_size == 0 &&
test->test[i].result == 0)
break;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 146/217] video: fbdev: asiliantfb: Error out if pixclock equals zero
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (144 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 145/217] bpf/tests: Do not PASS tests without actually testing the result Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 147/217] video: fbdev: kyro: " Greg Kroah-Hartman
` (73 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zheyu Ma, Sam Ravnborg, Sasha Levin
From: Zheyu Ma <zheyuma97@gmail.com>
[ Upstream commit b36b242d4b8ea178f7fd038965e3cac7f30c3f09 ]
The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of 'pixclock',
it may cause divide error.
Fix this by checking whether 'pixclock' is zero first.
The following log reveals it:
[ 43.861711] divide error: 0000 [#1] PREEMPT SMP KASAN PTI
[ 43.861737] CPU: 2 PID: 11764 Comm: i740 Not tainted 5.14.0-rc2-00513-gac532c9bbcfb-dirty #224
[ 43.861756] RIP: 0010:asiliantfb_check_var+0x4e/0x730
[ 43.861843] Call Trace:
[ 43.861848] ? asiliantfb_remove+0x190/0x190
[ 43.861858] fb_set_var+0x2e4/0xeb0
[ 43.861866] ? fb_blank+0x1a0/0x1a0
[ 43.861873] ? lock_acquire+0x1ef/0x530
[ 43.861884] ? lock_release+0x810/0x810
[ 43.861892] ? lock_is_held_type+0x100/0x140
[ 43.861903] ? ___might_sleep+0x1ee/0x2d0
[ 43.861914] ? __mutex_lock+0x620/0x1190
[ 43.861921] ? do_fb_ioctl+0x313/0x700
[ 43.861929] ? mutex_lock_io_nested+0xfa0/0xfa0
[ 43.861936] ? __this_cpu_preempt_check+0x1d/0x30
[ 43.861944] ? _raw_spin_unlock_irqrestore+0x46/0x60
[ 43.861952] ? lockdep_hardirqs_on+0x59/0x100
[ 43.861959] ? _raw_spin_unlock_irqrestore+0x46/0x60
[ 43.861967] ? trace_hardirqs_on+0x6a/0x1c0
[ 43.861978] do_fb_ioctl+0x31e/0x700
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-2-git-send-email-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/asiliantfb.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/video/fbdev/asiliantfb.c b/drivers/video/fbdev/asiliantfb.c
index ea31054a28ca..c1d6e6336225 100644
--- a/drivers/video/fbdev/asiliantfb.c
+++ b/drivers/video/fbdev/asiliantfb.c
@@ -227,6 +227,9 @@ static int asiliantfb_check_var(struct fb_var_screeninfo *var,
{
unsigned long Ftarget, ratio, remainder;
+ if (!var->pixclock)
+ return -EINVAL;
+
ratio = 1000000 / var->pixclock;
remainder = 1000000 % var->pixclock;
Ftarget = 1000000 * ratio + (1000000 * remainder) / var->pixclock;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 147/217] video: fbdev: kyro: Error out if pixclock equals zero
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (145 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 146/217] video: fbdev: asiliantfb: Error out if pixclock equals zero Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 148/217] video: fbdev: riva: " Greg Kroah-Hartman
` (72 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zheyu Ma, Sam Ravnborg, Sasha Levin
From: Zheyu Ma <zheyuma97@gmail.com>
[ Upstream commit 1520b4b7ba964f8eec2e7dd14c571d50de3e5191 ]
The userspace program could pass any values to the driver through
ioctl() interface. if the driver doesn't check the value of 'pixclock',
it may cause divide error because the value of 'lineclock' and
'frameclock' will be zero.
Fix this by checking whether 'pixclock' is zero in kyrofb_check_var().
The following log reveals it:
[ 103.073930] divide error: 0000 [#1] PREEMPT SMP KASAN PTI
[ 103.073942] CPU: 4 PID: 12483 Comm: syz-executor Not tainted 5.14.0-rc2-00478-g2734d6c1b1a0-dirty #118
[ 103.073959] RIP: 0010:kyrofb_set_par+0x316/0xc80
[ 103.074045] Call Trace:
[ 103.074048] ? ___might_sleep+0x1ee/0x2d0
[ 103.074060] ? kyrofb_ioctl+0x330/0x330
[ 103.074069] fb_set_var+0x5bf/0xeb0
[ 103.074078] ? fb_blank+0x1a0/0x1a0
[ 103.074085] ? lock_acquire+0x3bd/0x530
[ 103.074094] ? lock_release+0x810/0x810
[ 103.074103] ? ___might_sleep+0x1ee/0x2d0
[ 103.074114] ? __mutex_lock+0x620/0x1190
[ 103.074126] ? trace_hardirqs_on+0x6a/0x1c0
[ 103.074137] do_fb_ioctl+0x31e/0x700
[ 103.074144] ? fb_getput_cmap+0x280/0x280
[ 103.074152] ? rcu_read_lock_sched_held+0x11/0x80
[ 103.074162] ? rcu_read_lock_sched_held+0x11/0x80
[ 103.074171] ? __sanitizer_cov_trace_switch+0x67/0xf0
[ 103.074181] ? __sanitizer_cov_trace_const_cmp2+0x20/0x80
[ 103.074191] ? do_vfs_ioctl+0x14b/0x16c0
[ 103.074199] ? vfs_fileattr_set+0xb60/0xb60
[ 103.074207] ? rcu_read_lock_sched_held+0x11/0x80
[ 103.074216] ? lock_release+0x483/0x810
[ 103.074224] ? __fget_files+0x217/0x3d0
[ 103.074234] ? __fget_files+0x239/0x3d0
[ 103.074243] ? do_fb_ioctl+0x700/0x700
[ 103.074250] fb_ioctl+0xe6/0x130
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-3-git-send-email-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/kyro/fbdev.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/video/fbdev/kyro/fbdev.c b/drivers/video/fbdev/kyro/fbdev.c
index d7aa431e6846..74bf26b527b9 100644
--- a/drivers/video/fbdev/kyro/fbdev.c
+++ b/drivers/video/fbdev/kyro/fbdev.c
@@ -399,6 +399,9 @@ static int kyrofb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct kyrofb_info *par = info->par;
+ if (!var->pixclock)
+ return -EINVAL;
+
if (var->bits_per_pixel != 16 && var->bits_per_pixel != 32) {
printk(KERN_WARNING "kyrofb: depth not supported: %u\n", var->bits_per_pixel);
return -EINVAL;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 148/217] video: fbdev: riva: Error out if pixclock equals zero
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (146 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 147/217] video: fbdev: kyro: " Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 149/217] ipv4: ip_output.c: Fix out-of-bounds warning in ip_copy_addrs() Greg Kroah-Hartman
` (71 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zheyu Ma, Sam Ravnborg, Sasha Levin
From: Zheyu Ma <zheyuma97@gmail.com>
[ Upstream commit f92763cb0feba247e0939ed137b495601fd072a5 ]
The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of 'pixclock',
it may cause divide error.
Fix this by checking whether 'pixclock' is zero first.
The following log reveals it:
[ 33.396850] divide error: 0000 [#1] PREEMPT SMP KASAN PTI
[ 33.396864] CPU: 5 PID: 11754 Comm: i740 Not tainted 5.14.0-rc2-00513-gac532c9bbcfb-dirty #222
[ 33.396883] RIP: 0010:riva_load_video_mode+0x417/0xf70
[ 33.396969] Call Trace:
[ 33.396973] ? debug_smp_processor_id+0x1c/0x20
[ 33.396984] ? tick_nohz_tick_stopped+0x1a/0x90
[ 33.396996] ? rivafb_copyarea+0x3c0/0x3c0
[ 33.397003] ? wake_up_klogd.part.0+0x99/0xd0
[ 33.397014] ? vprintk_emit+0x110/0x4b0
[ 33.397024] ? vprintk_default+0x26/0x30
[ 33.397033] ? vprintk+0x9c/0x1f0
[ 33.397041] ? printk+0xba/0xed
[ 33.397054] ? record_print_text.cold+0x16/0x16
[ 33.397063] ? __kasan_check_read+0x11/0x20
[ 33.397074] ? profile_tick+0xc0/0x100
[ 33.397084] ? __sanitizer_cov_trace_const_cmp4+0x24/0x80
[ 33.397094] ? riva_set_rop_solid+0x2a0/0x2a0
[ 33.397102] rivafb_set_par+0xbe/0x610
[ 33.397111] ? riva_set_rop_solid+0x2a0/0x2a0
[ 33.397119] fb_set_var+0x5bf/0xeb0
[ 33.397127] ? fb_blank+0x1a0/0x1a0
[ 33.397134] ? lock_acquire+0x1ef/0x530
[ 33.397143] ? lock_release+0x810/0x810
[ 33.397151] ? lock_is_held_type+0x100/0x140
[ 33.397159] ? ___might_sleep+0x1ee/0x2d0
[ 33.397170] ? __mutex_lock+0x620/0x1190
[ 33.397180] ? trace_hardirqs_on+0x6a/0x1c0
[ 33.397190] do_fb_ioctl+0x31e/0x700
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-4-git-send-email-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/riva/fbdev.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/video/fbdev/riva/fbdev.c b/drivers/video/fbdev/riva/fbdev.c
index 1ea78bb911fb..c080d14f9d2a 100644
--- a/drivers/video/fbdev/riva/fbdev.c
+++ b/drivers/video/fbdev/riva/fbdev.c
@@ -1088,6 +1088,9 @@ static int rivafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
int mode_valid = 0;
NVTRACE_ENTER();
+ if (!var->pixclock)
+ return -EINVAL;
+
switch (var->bits_per_pixel) {
case 1 ... 8:
var->red.offset = var->green.offset = var->blue.offset = 0;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 149/217] ipv4: ip_output.c: Fix out-of-bounds warning in ip_copy_addrs()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (147 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 148/217] video: fbdev: riva: " Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 150/217] flow_dissector: Fix out-of-bounds warnings Greg Kroah-Hartman
` (70 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot,
Gustavo A. R. Silva, David S. Miller, Sasha Levin
From: Gustavo A. R. Silva <gustavoars@kernel.org>
[ Upstream commit 6321c7acb82872ef6576c520b0e178eaad3a25c0 ]
Fix the following out-of-bounds warning:
In function 'ip_copy_addrs',
inlined from '__ip_queue_xmit' at net/ipv4/ip_output.c:517:2:
net/ipv4/ip_output.c:449:2: warning: 'memcpy' offset [40, 43] from the object at 'fl' is out of the bounds of referenced subobject 'saddr' with type 'unsigned int' at offset 36 [-Warray-bounds]
449 | memcpy(&iph->saddr, &fl4->saddr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
450 | sizeof(fl4->saddr) + sizeof(fl4->daddr));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &iph->saddr and &fl4->saddr. As these are just
a couple of struct members, fix this by using direct assignments,
instead of memcpy().
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/d5ae2e65-1f18-2577-246f-bada7eee6ccd@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/ip_output.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 5ec185a9dcab..c9f82525bfa4 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -419,8 +419,9 @@ static void ip_copy_addrs(struct iphdr *iph, const struct flowi4 *fl4)
{
BUILD_BUG_ON(offsetof(typeof(*fl4), daddr) !=
offsetof(typeof(*fl4), saddr) + sizeof(fl4->saddr));
- memcpy(&iph->saddr, &fl4->saddr,
- sizeof(fl4->saddr) + sizeof(fl4->daddr));
+
+ iph->saddr = fl4->saddr;
+ iph->daddr = fl4->daddr;
}
/* Note: skb->sk can be different from sk, in case of tunnels */
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 150/217] flow_dissector: Fix out-of-bounds warnings
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (148 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 149/217] ipv4: ip_output.c: Fix out-of-bounds warning in ip_copy_addrs() Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 151/217] s390/jump_label: print real address in a case of a jump label bug Greg Kroah-Hartman
` (69 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot,
Gustavo A. R. Silva, David S. Miller, Sasha Levin
From: Gustavo A. R. Silva <gustavoars@kernel.org>
[ Upstream commit 323e0cb473e2a8706ff162b6b4f4fa16023c9ba7 ]
Fix the following out-of-bounds warnings:
net/core/flow_dissector.c: In function '__skb_flow_dissect':
>> net/core/flow_dissector.c:1104:4: warning: 'memcpy' offset [24, 39] from the object at '<unknown>' is out of the bounds of referenced subobject 'saddr' with type 'struct in6_addr' at offset 8 [-Warray-bounds]
1104 | memcpy(&key_addrs->v6addrs, &iph->saddr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1105 | sizeof(key_addrs->v6addrs));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from include/linux/ipv6.h:5,
from net/core/flow_dissector.c:6:
include/uapi/linux/ipv6.h:133:18: note: subobject 'saddr' declared here
133 | struct in6_addr saddr;
| ^~~~~
>> net/core/flow_dissector.c:1059:4: warning: 'memcpy' offset [16, 19] from the object at '<unknown>' is out of the bounds of referenced subobject 'saddr' with type 'unsigned int' at offset 12 [-Warray-bounds]
1059 | memcpy(&key_addrs->v4addrs, &iph->saddr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1060 | sizeof(key_addrs->v4addrs));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from include/linux/ip.h:17,
from net/core/flow_dissector.c:5:
include/uapi/linux/ip.h:103:9: note: subobject 'saddr' declared here
103 | __be32 saddr;
| ^~~~~
The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). So, the compiler legitimately complains about it. As these
are just a couple of members, fix this by copying each one of them in
separate calls to memcpy().
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/d5ae2e65-1f18-2577-246f-bada7eee6ccd@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/core/flow_dissector.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c
index 071de3013364..b4dddb685fc2 100644
--- a/net/core/flow_dissector.c
+++ b/net/core/flow_dissector.c
@@ -514,8 +514,10 @@ bool __skb_flow_dissect(const struct sk_buff *skb,
FLOW_DISSECTOR_KEY_IPV4_ADDRS,
target_container);
- memcpy(&key_addrs->v4addrs, &iph->saddr,
- sizeof(key_addrs->v4addrs));
+ memcpy(&key_addrs->v4addrs.src, &iph->saddr,
+ sizeof(key_addrs->v4addrs.src));
+ memcpy(&key_addrs->v4addrs.dst, &iph->daddr,
+ sizeof(key_addrs->v4addrs.dst));
key_control->addr_type = FLOW_DISSECTOR_KEY_IPV4_ADDRS;
}
@@ -564,8 +566,10 @@ bool __skb_flow_dissect(const struct sk_buff *skb,
FLOW_DISSECTOR_KEY_IPV6_ADDRS,
target_container);
- memcpy(&key_addrs->v6addrs, &iph->saddr,
- sizeof(key_addrs->v6addrs));
+ memcpy(&key_addrs->v6addrs.src, &iph->saddr,
+ sizeof(key_addrs->v6addrs.src));
+ memcpy(&key_addrs->v6addrs.dst, &iph->daddr,
+ sizeof(key_addrs->v6addrs.dst));
key_control->addr_type = FLOW_DISSECTOR_KEY_IPV6_ADDRS;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 151/217] s390/jump_label: print real address in a case of a jump label bug
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (149 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 150/217] flow_dissector: Fix out-of-bounds warnings Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 152/217] serial: 8250: Define RX trigger levels for OxSemi 950 devices Greg Kroah-Hartman
` (68 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Heiko Carstens, Sasha Levin
From: Heiko Carstens <hca@linux.ibm.com>
[ Upstream commit 5492886c14744d239e87f1b0b774b5a341e755cc ]
In case of a jump label print the real address of the piece of code
where a mismatch was detected. This is right before the system panics,
so there is nothing revealed.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/s390/kernel/jump_label.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/s390/kernel/jump_label.c b/arch/s390/kernel/jump_label.c
index 43f8430fb67d..608b363cd35b 100644
--- a/arch/s390/kernel/jump_label.c
+++ b/arch/s390/kernel/jump_label.c
@@ -43,7 +43,7 @@ static void jump_label_bug(struct jump_entry *entry, struct insn *expected,
unsigned char *ipe = (unsigned char *)expected;
unsigned char *ipn = (unsigned char *)new;
- pr_emerg("Jump label code mismatch at %pS [%p]\n", ipc, ipc);
+ pr_emerg("Jump label code mismatch at %pS [%px]\n", ipc, ipc);
pr_emerg("Found: %6ph\n", ipc);
pr_emerg("Expected: %6ph\n", ipe);
pr_emerg("New: %6ph\n", ipn);
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 152/217] serial: 8250: Define RX trigger levels for OxSemi 950 devices
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (150 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 151/217] s390/jump_label: print real address in a case of a jump label bug Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 153/217] xtensa: ISS: dont panic in rs_init Greg Kroah-Hartman
` (67 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Maciej W. Rozycki, Sasha Levin
From: Maciej W. Rozycki <macro@orcam.me.uk>
[ Upstream commit d7aff291d069c4418285f3c8ee27b0ff67ce5998 ]
Oxford Semiconductor 950 serial port devices have a 128-byte FIFO and in
the enhanced (650) mode, which we select in `autoconfig_has_efr' with
the ECB bit set in the EFR register, they support the receive interrupt
trigger level selectable with FCR bits 7:6 from the set of 16, 32, 112,
120. This applies to the original OX16C950 discrete UART[1] as well as
950 cores embedded into more complex devices.
For these devices we set the default to 112, which sets an excessively
high level of 112 or 7/8 of the FIFO capacity, unlike with other port
types where we choose at most 1/2 of their respective FIFO capacities.
Additionally we don't make the trigger level configurable. Consequently
frequent input overruns happen with high bit rates where hardware flow
control cannot be used (e.g. terminal applications) even with otherwise
highly-performant systems.
Lower the default receive interrupt trigger level to 32 then, and make
it configurable. Document the trigger levels along with other port
types, including the set of 16, 32, 64, 112 for the transmit interrupt
as well[2].
[1] "OX16C950 rev B High Performance UART with 128 byte FIFOs", Oxford
Semiconductor, Inc., DS-0031, Sep 05, Table 10: "Receiver Trigger
Levels", p. 22
[2] same, Table 9: "Transmit Interrupt Trigger Levels", p. 22
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260608480.37803@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/8250/8250_port.c | 3 ++-
include/uapi/linux/serial_reg.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 20f58e9da2fb..7ac6bb38948f 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -136,7 +136,8 @@ static const struct serial8250_config uart_config[] = {
.name = "16C950/954",
.fifo_size = 128,
.tx_loadsz = 128,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01,
+ .rxtrig_bytes = {16, 32, 112, 120},
/* UART_CAP_EFR breaks billionon CF bluetooth card. */
.flags = UART_CAP_FIFO | UART_CAP_SLEEP,
},
diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
index 619fe6111dc9..a31ae32161f3 100644
--- a/include/uapi/linux/serial_reg.h
+++ b/include/uapi/linux/serial_reg.h
@@ -62,6 +62,7 @@
* ST16C654: 8 16 56 60 8 16 32 56 PORT_16654
* TI16C750: 1 16 32 56 xx xx xx xx PORT_16750
* TI16C752: 8 16 56 60 8 16 32 56
+ * OX16C950: 16 32 112 120 16 32 64 112 PORT_16C950
* Tegra: 1 4 8 14 16 8 4 1 PORT_TEGRA
*/
#define UART_FCR_R_TRIG_00 0x00
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 153/217] xtensa: ISS: dont panic in rs_init
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (151 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 152/217] serial: 8250: Define RX trigger levels for OxSemi 950 devices Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` Greg Kroah-Hartman
` (66 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chris Zankel, Max Filippov,
linux-xtensa, Jiri Slaby, Sasha Levin
From: Jiri Slaby <jslaby@suse.cz>
[ Upstream commit 23411c720052ad860b3e579ee4873511e367130a ]
While alloc_tty_driver failure in rs_init would mean we have much bigger
problem, there is no reason to panic when tty_register_driver fails
there. It can fail for various reasons.
So handle the failure gracefully. Actually handle them both while at it.
This will make at least the console functional as it was enabled earlier
by console_initcall in iss_console_init. Instead of shooting down the
whole system.
We move tty_port_init() after alloc_tty_driver(), so that we don't need
to destroy the port in case the latter function fails.
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-xtensa@linux-xtensa.org
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210723074317.32690-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/xtensa/platforms/iss/console.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index 0140a22551c8..63d6d043af16 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -182,9 +182,13 @@ static const struct tty_operations serial_ops = {
int __init rs_init(void)
{
- tty_port_init(&serial_port);
+ int ret;
serial_driver = alloc_tty_driver(SERIAL_MAX_NUM_LINES);
+ if (!serial_driver)
+ return -ENOMEM;
+
+ tty_port_init(&serial_port);
printk ("%s %s\n", serial_name, serial_version);
@@ -204,8 +208,15 @@ int __init rs_init(void)
tty_set_operations(serial_driver, &serial_ops);
tty_port_link_device(&serial_port, serial_driver, 0);
- if (tty_register_driver(serial_driver))
- panic("Couldn't register serial driver\n");
+ ret = tty_register_driver(serial_driver);
+ if (ret) {
+ pr_err("Couldn't register serial driver\n");
+ tty_driver_kref_put(serial_driver);
+ tty_port_destroy(&serial_port);
+
+ return ret;
+ }
+
return 0;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 154/217] hvsi: dont panic on tty_register_driver failure
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 002/217] xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG Greg Kroah-Hartman
` (218 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Sasha Levin, Greg Kroah-Hartman, Jiri Slaby, linuxppc-dev, stable
From: Jiri Slaby <jslaby@suse.cz>
[ Upstream commit 7ccbdcc4d08a6d7041e4849219bbb12ffa45db4c ]
The alloc_tty_driver failure is handled gracefully in hvsi_init. But
tty_register_driver is not. panic is called if that one fails.
So handle the failure of tty_register_driver gracefully too. This will
keep at least the console functional as it was enabled earlier by
console_initcall in hvsi_console_init. Instead of shooting down the
whole system.
This means, we disable interrupts and restore hvsi_wait back to
poll_for_state().
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210723074317.32690-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/hvc/hvsi.c | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index 2e578d6433af..7d7fdfc578a9 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -1051,7 +1051,7 @@ static const struct tty_operations hvsi_ops = {
static int __init hvsi_init(void)
{
- int i;
+ int i, ret;
hvsi_driver = alloc_tty_driver(hvsi_count);
if (!hvsi_driver)
@@ -1082,12 +1082,25 @@ static int __init hvsi_init(void)
}
hvsi_wait = wait_for_state; /* irqs active now */
- if (tty_register_driver(hvsi_driver))
- panic("Couldn't register hvsi console driver\n");
+ ret = tty_register_driver(hvsi_driver);
+ if (ret) {
+ pr_err("Couldn't register hvsi console driver\n");
+ goto err_free_irq;
+ }
printk(KERN_DEBUG "HVSI: registered %i devices\n", hvsi_count);
return 0;
+err_free_irq:
+ hvsi_wait = poll_for_state;
+ for (i = 0; i < hvsi_count; i++) {
+ struct hvsi_struct *hp = &hvsi_ports[i];
+
+ free_irq(hp->virq, hp);
+ }
+ tty_driver_kref_put(hvsi_driver);
+
+ return ret;
}
device_initcall(hvsi_init);
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 154/217] hvsi: dont panic on tty_register_driver failure
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
0 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, linuxppc-dev, Jiri Slaby, Sasha Levin
From: Jiri Slaby <jslaby@suse.cz>
[ Upstream commit 7ccbdcc4d08a6d7041e4849219bbb12ffa45db4c ]
The alloc_tty_driver failure is handled gracefully in hvsi_init. But
tty_register_driver is not. panic is called if that one fails.
So handle the failure of tty_register_driver gracefully too. This will
keep at least the console functional as it was enabled earlier by
console_initcall in hvsi_console_init. Instead of shooting down the
whole system.
This means, we disable interrupts and restore hvsi_wait back to
poll_for_state().
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210723074317.32690-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/hvc/hvsi.c | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index 2e578d6433af..7d7fdfc578a9 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -1051,7 +1051,7 @@ static const struct tty_operations hvsi_ops = {
static int __init hvsi_init(void)
{
- int i;
+ int i, ret;
hvsi_driver = alloc_tty_driver(hvsi_count);
if (!hvsi_driver)
@@ -1082,12 +1082,25 @@ static int __init hvsi_init(void)
}
hvsi_wait = wait_for_state; /* irqs active now */
- if (tty_register_driver(hvsi_driver))
- panic("Couldn't register hvsi console driver\n");
+ ret = tty_register_driver(hvsi_driver);
+ if (ret) {
+ pr_err("Couldn't register hvsi console driver\n");
+ goto err_free_irq;
+ }
printk(KERN_DEBUG "HVSI: registered %i devices\n", hvsi_count);
return 0;
+err_free_irq:
+ hvsi_wait = poll_for_state;
+ for (i = 0; i < hvsi_count; i++) {
+ struct hvsi_struct *hp = &hvsi_ports[i];
+
+ free_irq(hp->virq, hp);
+ }
+ tty_driver_kref_put(hvsi_driver);
+
+ return ret;
}
device_initcall(hvsi_init);
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread
* [PATCH 4.14 155/217] serial: 8250_pci: make setup_port() parameters explicitly unsigned
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (153 preceding siblings ...)
2021-09-20 16:42 ` Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 156/217] staging: ks7010: Fix the initialization of the sleep_status structure Greg Kroah-Hartman
` (64 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jiri Slaby, Jordy Zomer, Sasha Levin
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3a96e97ab4e835078e6f27b7e1c0947814df3841 ]
The bar and offset parameters to setup_port() are used in pointer math,
and while it would be very difficult to get them to wrap as a negative
number, just be "safe" and make them unsigned so that static checkers do
not trip over them unintentionally.
Cc: Jiri Slaby <jirislaby@kernel.org>
Reported-by: Jordy Zomer <jordy@pwning.systems>
Link: https://lore.kernel.org/r/20210726130717.2052096-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/8250/8250_pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 071ee37399b7..72015cc7b33f 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -73,7 +73,7 @@ static void moan_device(const char *str, struct pci_dev *dev)
static int
setup_port(struct serial_private *priv, struct uart_8250_port *port,
- int bar, int offset, int regshift)
+ u8 bar, unsigned int offset, int regshift)
{
struct pci_dev *dev = priv->dev;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 156/217] staging: ks7010: Fix the initialization of the sleep_status structure
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (154 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 155/217] serial: 8250_pci: make setup_port() parameters explicitly unsigned Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 157/217] ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init() Greg Kroah-Hartman
` (63 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Christophe JAILLET, Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit 56315e55119c0ea57e142b6efb7c31208628ad86 ]
'sleep_status' has 3 atomic_t members. Initialize the 3 of them instead of
initializing only 2 of them and setting 0 twice to the same variable.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d2e52a33a9beab41879551d0ae2fdfc99970adab.1626856991.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/ks7010/ks7010_sdio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/ks7010/ks7010_sdio.c b/drivers/staging/ks7010/ks7010_sdio.c
index 8cfdff198334..84a5b6ebfd07 100644
--- a/drivers/staging/ks7010/ks7010_sdio.c
+++ b/drivers/staging/ks7010/ks7010_sdio.c
@@ -904,9 +904,9 @@ static int ks7010_sdio_probe(struct sdio_func *func,
memset(&priv->wstats, 0, sizeof(priv->wstats));
/* sleep mode */
+ atomic_set(&priv->sleepstatus.status, 0);
atomic_set(&priv->sleepstatus.doze_request, 0);
atomic_set(&priv->sleepstatus.wakeup_request, 0);
- atomic_set(&priv->sleepstatus.wakeup_request, 0);
trx_device_init(priv);
hostif_init(priv);
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 157/217] ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (155 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 156/217] staging: ks7010: Fix the initialization of the sleep_status structure Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:42 ` [PATCH 4.14 158/217] Bluetooth: skip invalid hci_sync_conn_complete_evt Greg Kroah-Hartman
` (62 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andy Shevchenko, Jens Axboe, Sasha Levin
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Upstream commit 3ad4a31620355358316fa08fcfab37b9d6c33347 ]
Last change to device managed APIs cleaned up error path to simple phy_exit()
call, which in some cases has been executed with NULL parameter. This per se
is not a problem, but rather logical misconception: no need to free resource
when it's for sure has not been allocated yet. Fix the driver accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210727125130.19977-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/ata/sata_dwc_460ex.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index ce128d5a6ded..ed301dee200d 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -1253,24 +1253,20 @@ static int sata_dwc_probe(struct platform_device *ofdev)
irq = irq_of_parse_and_map(np, 0);
if (irq == NO_IRQ) {
dev_err(&ofdev->dev, "no SATA DMA irq\n");
- err = -ENODEV;
- goto error_out;
+ return -ENODEV;
}
#ifdef CONFIG_SATA_DWC_OLD_DMA
if (!of_find_property(np, "dmas", NULL)) {
err = sata_dwc_dma_init_old(ofdev, hsdev);
if (err)
- goto error_out;
+ return err;
}
#endif
hsdev->phy = devm_phy_optional_get(hsdev->dev, "sata-phy");
- if (IS_ERR(hsdev->phy)) {
- err = PTR_ERR(hsdev->phy);
- hsdev->phy = NULL;
- goto error_out;
- }
+ if (IS_ERR(hsdev->phy))
+ return PTR_ERR(hsdev->phy);
err = phy_init(hsdev->phy);
if (err)
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 158/217] Bluetooth: skip invalid hci_sync_conn_complete_evt
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (156 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 157/217] ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init() Greg Kroah-Hartman
@ 2021-09-20 16:42 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 159/217] ASoC: Intel: bytcr_rt5640: Move "Platform Clock" routes to the maps for the matching in-/output Greg Kroah-Hartman
` (61 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+66264bf2fd0476be7e6c,
Desmond Cheong Zhi Xi, Marcel Holtmann, Sasha Levin
From: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
[ Upstream commit 92fe24a7db751b80925214ede43f8d2be792ea7b ]
Syzbot reported a corrupted list in kobject_add_internal [1]. This
happens when multiple HCI_EV_SYNC_CONN_COMPLETE event packets with
status 0 are sent for the same HCI connection. This causes us to
register the device more than once which corrupts the kset list.
As this is forbidden behavior, we add a check for whether we're
trying to process the same HCI_EV_SYNC_CONN_COMPLETE event multiple
times for one connection. If that's the case, the event is invalid, so
we report an error that the device is misbehaving, and ignore the
packet.
Link: https://syzkaller.appspot.com/bug?extid=66264bf2fd0476be7e6c [1]
Reported-by: syzbot+66264bf2fd0476be7e6c@syzkaller.appspotmail.com
Tested-by: syzbot+66264bf2fd0476be7e6c@syzkaller.appspotmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/hci_event.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index b3253f2e11af..5186f199d892 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -3761,6 +3761,21 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev,
switch (ev->status) {
case 0x00:
+ /* The synchronous connection complete event should only be
+ * sent once per new connection. Receiving a successful
+ * complete event when the connection status is already
+ * BT_CONNECTED means that the device is misbehaving and sent
+ * multiple complete event packets for the same new connection.
+ *
+ * Registering the device more than once can corrupt kernel
+ * memory, hence upon detecting this invalid event, we report
+ * an error and ignore the packet.
+ */
+ if (conn->state == BT_CONNECTED) {
+ bt_dev_err(hdev, "Ignoring connect complete event for existing connection");
+ goto unlock;
+ }
+
conn->handle = __le16_to_cpu(ev->handle);
conn->state = BT_CONNECTED;
conn->type = ev->link_type;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 159/217] ASoC: Intel: bytcr_rt5640: Move "Platform Clock" routes to the maps for the matching in-/output
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (157 preceding siblings ...)
2021-09-20 16:42 ` [PATCH 4.14 158/217] Bluetooth: skip invalid hci_sync_conn_complete_evt Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 160/217] media: v4l2-dv-timings.c: fix wrong condition in two for-loops Greg Kroah-Hartman
` (60 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans de Goede, Pierre-Louis Bossart,
Mark Brown, Sasha Levin
From: Hans de Goede <hdegoede@redhat.com>
[ Upstream commit dccd1dfd0770bfd494b68d1135b4547b2c602c42 ]
Move the "Platform Clock" routes for the "Internal Mic" and "Speaker"
routes to the intmic_*_map[] / *_spk_map[] arrays.
This ensures that these "Platform Clock" routes do not get added when the
BYT_RT5640_NO_INTERNAL_MIC_MAP / BYT_RT5640_NO_SPEAKERS quirks are used.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210802142501.991985-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/intel/boards/bytcr_rt5640.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 4a76b099a508..e389ecf06e63 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -226,9 +226,6 @@ static const struct snd_soc_dapm_widget byt_rt5640_widgets[] = {
static const struct snd_soc_dapm_route byt_rt5640_audio_map[] = {
{"Headphone", NULL, "Platform Clock"},
{"Headset Mic", NULL, "Platform Clock"},
- {"Internal Mic", NULL, "Platform Clock"},
- {"Speaker", NULL, "Platform Clock"},
-
{"Headset Mic", NULL, "MICBIAS1"},
{"IN2P", NULL, "Headset Mic"},
{"Headphone", NULL, "HPOL"},
@@ -236,19 +233,23 @@ static const struct snd_soc_dapm_route byt_rt5640_audio_map[] = {
};
static const struct snd_soc_dapm_route byt_rt5640_intmic_dmic1_map[] = {
+ {"Internal Mic", NULL, "Platform Clock"},
{"DMIC1", NULL, "Internal Mic"},
};
static const struct snd_soc_dapm_route byt_rt5640_intmic_dmic2_map[] = {
+ {"Internal Mic", NULL, "Platform Clock"},
{"DMIC2", NULL, "Internal Mic"},
};
static const struct snd_soc_dapm_route byt_rt5640_intmic_in1_map[] = {
+ {"Internal Mic", NULL, "Platform Clock"},
{"Internal Mic", NULL, "MICBIAS1"},
{"IN1P", NULL, "Internal Mic"},
};
static const struct snd_soc_dapm_route byt_rt5640_intmic_in3_map[] = {
+ {"Internal Mic", NULL, "Platform Clock"},
{"Internal Mic", NULL, "MICBIAS1"},
{"IN3P", NULL, "Internal Mic"},
};
@@ -290,6 +291,7 @@ static const struct snd_soc_dapm_route byt_rt5640_ssp0_aif2_map[] = {
};
static const struct snd_soc_dapm_route byt_rt5640_stereo_spk_map[] = {
+ {"Speaker", NULL, "Platform Clock"},
{"Speaker", NULL, "SPOLP"},
{"Speaker", NULL, "SPOLN"},
{"Speaker", NULL, "SPORP"},
@@ -297,6 +299,7 @@ static const struct snd_soc_dapm_route byt_rt5640_stereo_spk_map[] = {
};
static const struct snd_soc_dapm_route byt_rt5640_mono_spk_map[] = {
+ {"Speaker", NULL, "Platform Clock"},
{"Speaker", NULL, "SPOLP"},
{"Speaker", NULL, "SPOLN"},
};
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 160/217] media: v4l2-dv-timings.c: fix wrong condition in two for-loops
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (158 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 159/217] ASoC: Intel: bytcr_rt5640: Move "Platform Clock" routes to the maps for the matching in-/output Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 161/217] arm64: dts: qcom: sdm660: use reg value for memory node Greg Kroah-Hartman
` (59 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans Verkuil, Krzysztof Hałasa,
Mauro Carvalho Chehab, Sasha Levin
From: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[ Upstream commit 4108b3e6db31acc4c68133290bbcc87d4db905c9 ]
These for-loops should test against v4l2_dv_timings_presets[i].bt.width,
not if i < v4l2_dv_timings_presets[i].bt.width. Luckily nothing ever broke,
since the smallest width is still a lot higher than the total number of
presets, but it is wrong.
The last item in the presets array is all 0, so the for-loop must stop
when it reaches that sentinel.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/v4l2-core/v4l2-dv-timings.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/v4l2-core/v4l2-dv-timings.c b/drivers/media/v4l2-core/v4l2-dv-timings.c
index 5c8c49d240d1..bed6b7db43f5 100644
--- a/drivers/media/v4l2-core/v4l2-dv-timings.c
+++ b/drivers/media/v4l2-core/v4l2-dv-timings.c
@@ -207,7 +207,7 @@ bool v4l2_find_dv_timings_cap(struct v4l2_dv_timings *t,
if (!v4l2_valid_dv_timings(t, cap, fnc, fnc_handle))
return false;
- for (i = 0; i < v4l2_dv_timings_presets[i].bt.width; i++) {
+ for (i = 0; v4l2_dv_timings_presets[i].bt.width; i++) {
if (v4l2_valid_dv_timings(v4l2_dv_timings_presets + i, cap,
fnc, fnc_handle) &&
v4l2_match_dv_timings(t, v4l2_dv_timings_presets + i,
@@ -229,7 +229,7 @@ bool v4l2_find_dv_timings_cea861_vic(struct v4l2_dv_timings *t, u8 vic)
{
unsigned int i;
- for (i = 0; i < v4l2_dv_timings_presets[i].bt.width; i++) {
+ for (i = 0; v4l2_dv_timings_presets[i].bt.width; i++) {
const struct v4l2_bt_timings *bt =
&v4l2_dv_timings_presets[i].bt;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 161/217] arm64: dts: qcom: sdm660: use reg value for memory node
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (159 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 160/217] media: v4l2-dv-timings.c: fix wrong condition in two for-loops Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 162/217] net: ethernet: stmmac: Do not use unreachable() in ipq806x_gmac_probe() Greg Kroah-Hartman
` (58 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vinod Koul, Bjorn Andersson, Sasha Levin
From: Vinod Koul <vkoul@kernel.org>
[ Upstream commit c81210e38966cfa1c784364e4035081c3227cf5b ]
memory node like other node should be node@reg, which is missing in this
case, so fix it up
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 1073741824, 0, 536870912]]}
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-18-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index 6a838b5d321e..1ab7deeb2497 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -27,7 +27,7 @@ chosen {
stdout-path = "serial0";
};
- memory {
+ memory@40000000 {
device_type = "memory";
reg = <0x0 0x40000000 0x0 0x20000000>;
};
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 162/217] net: ethernet: stmmac: Do not use unreachable() in ipq806x_gmac_probe()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (160 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 161/217] arm64: dts: qcom: sdm660: use reg value for memory node Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 163/217] Bluetooth: avoid circular locks in sco_sock_connect Greg Kroah-Hartman
` (57 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sami Tolvanen, Nathan Chancellor,
David S. Miller, Sasha Levin
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit 4367355dd90942a71641c98c40c74589c9bddf90 ]
When compiling with clang in certain configurations, an objtool warning
appears:
drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.o: warning: objtool:
ipq806x_gmac_probe() falls through to next function phy_modes()
This happens because the unreachable annotation in the third switch
statement is not eliminated. The compiler should know that the first
default case would prevent the second and third from being reached as
the comment notes but sanitizer options can make it harder for the
compiler to reason this out.
Help the compiler out by eliminating the unreachable() annotation and
unifying the default case error handling so that there is no objtool
warning, the meaning of the code stays the same, and there is less
duplication.
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../ethernet/stmicro/stmmac/dwmac-ipq806x.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
index f4ff43a1b5ba..d8c40b68bc96 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -300,10 +300,7 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
val &= ~NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
break;
default:
- dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
- phy_modes(gmac->phy_mode));
- err = -EINVAL;
- goto err_remove_config_dt;
+ goto err_unsupported_phy;
}
regmap_write(gmac->nss_common, NSS_COMMON_GMAC_CTL(gmac->id), val);
@@ -320,10 +317,7 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
break;
default:
- dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
- phy_modes(gmac->phy_mode));
- err = -EINVAL;
- goto err_remove_config_dt;
+ goto err_unsupported_phy;
}
regmap_write(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, val);
@@ -340,8 +334,7 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id);
break;
default:
- /* We don't get here; the switch above will have errored out */
- unreachable();
+ goto err_unsupported_phy;
}
regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
@@ -372,6 +365,11 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
return 0;
+err_unsupported_phy:
+ dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
+ phy_modes(gmac->phy_mode));
+ err = -EINVAL;
+
err_remove_config_dt:
stmmac_remove_config_dt(pdev, plat_dat);
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 163/217] Bluetooth: avoid circular locks in sco_sock_connect
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (161 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 162/217] net: ethernet: stmmac: Do not use unreachable() in ipq806x_gmac_probe() Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 164/217] gpu: drm: amd: amdgpu: amdgpu_i2c: fix possible uninitialized-variable access in amdgpu_i2c_router_select_ddc_port() Greg Kroah-Hartman
` (56 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Desmond Cheong Zhi Xi,
Luiz Augusto von Dentz, Sasha Levin
From: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
[ Upstream commit 734bc5ff783115aa3164f4e9dd5967ae78e0a8ab ]
In a future patch, calls to bh_lock_sock in sco.c should be replaced
by lock_sock now that none of the functions are run in IRQ context.
However, doing so results in a circular locking dependency:
======================================================
WARNING: possible circular locking dependency detected
5.14.0-rc4-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor.2/14867 is trying to acquire lock:
ffff88803e3c1120 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at:
lock_sock include/net/sock.h:1613 [inline]
ffff88803e3c1120 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at:
sco_conn_del+0x12a/0x2a0 net/bluetooth/sco.c:191
but task is already holding lock:
ffffffff8d2dc7c8 (hci_cb_list_lock){+.+.}-{3:3}, at:
hci_disconn_cfm include/net/bluetooth/hci_core.h:1497 [inline]
ffffffff8d2dc7c8 (hci_cb_list_lock){+.+.}-{3:3}, at:
hci_conn_hash_flush+0xda/0x260 net/bluetooth/hci_conn.c:1608
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (hci_cb_list_lock){+.+.}-{3:3}:
__mutex_lock_common kernel/locking/mutex.c:959 [inline]
__mutex_lock+0x12a/0x10a0 kernel/locking/mutex.c:1104
hci_connect_cfm include/net/bluetooth/hci_core.h:1482 [inline]
hci_remote_features_evt net/bluetooth/hci_event.c:3263 [inline]
hci_event_packet+0x2f4d/0x7c50 net/bluetooth/hci_event.c:6240
hci_rx_work+0x4f8/0xd30 net/bluetooth/hci_core.c:5122
process_one_work+0x98d/0x1630 kernel/workqueue.c:2276
worker_thread+0x658/0x11f0 kernel/workqueue.c:2422
kthread+0x3e5/0x4d0 kernel/kthread.c:319
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
-> #1 (&hdev->lock){+.+.}-{3:3}:
__mutex_lock_common kernel/locking/mutex.c:959 [inline]
__mutex_lock+0x12a/0x10a0 kernel/locking/mutex.c:1104
sco_connect net/bluetooth/sco.c:245 [inline]
sco_sock_connect+0x227/0xa10 net/bluetooth/sco.c:601
__sys_connect_file+0x155/0x1a0 net/socket.c:1879
__sys_connect+0x161/0x190 net/socket.c:1896
__do_sys_connect net/socket.c:1906 [inline]
__se_sys_connect net/socket.c:1903 [inline]
__x64_sys_connect+0x6f/0xb0 net/socket.c:1903
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}:
check_prev_add kernel/locking/lockdep.c:3051 [inline]
check_prevs_add kernel/locking/lockdep.c:3174 [inline]
validate_chain kernel/locking/lockdep.c:3789 [inline]
__lock_acquire+0x2a07/0x54a0 kernel/locking/lockdep.c:5015
lock_acquire kernel/locking/lockdep.c:5625 [inline]
lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5590
lock_sock_nested+0xca/0x120 net/core/sock.c:3170
lock_sock include/net/sock.h:1613 [inline]
sco_conn_del+0x12a/0x2a0 net/bluetooth/sco.c:191
sco_disconn_cfm+0x71/0xb0 net/bluetooth/sco.c:1202
hci_disconn_cfm include/net/bluetooth/hci_core.h:1500 [inline]
hci_conn_hash_flush+0x127/0x260 net/bluetooth/hci_conn.c:1608
hci_dev_do_close+0x528/0x1130 net/bluetooth/hci_core.c:1778
hci_unregister_dev+0x1c0/0x5a0 net/bluetooth/hci_core.c:4015
vhci_release+0x70/0xe0 drivers/bluetooth/hci_vhci.c:340
__fput+0x288/0x920 fs/file_table.c:280
task_work_run+0xdd/0x1a0 kernel/task_work.c:164
exit_task_work include/linux/task_work.h:32 [inline]
do_exit+0xbd4/0x2a60 kernel/exit.c:825
do_group_exit+0x125/0x310 kernel/exit.c:922
get_signal+0x47f/0x2160 kernel/signal.c:2808
arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:865
handle_signal_work kernel/entry/common.c:148 [inline]
exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:209
__syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:302
ret_from_fork+0x15/0x30 arch/x86/entry/entry_64.S:288
other info that might help us debug this:
Chain exists of:
sk_lock-AF_BLUETOOTH-BTPROTO_SCO --> &hdev->lock --> hci_cb_list_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(hci_cb_list_lock);
lock(&hdev->lock);
lock(hci_cb_list_lock);
lock(sk_lock-AF_BLUETOOTH-BTPROTO_SCO);
*** DEADLOCK ***
The issue is that the lock hierarchy should go from &hdev->lock -->
hci_cb_list_lock --> sk_lock-AF_BLUETOOTH-BTPROTO_SCO. For example,
one such call trace is:
hci_dev_do_close():
hci_dev_lock();
hci_conn_hash_flush():
hci_disconn_cfm():
mutex_lock(&hci_cb_list_lock);
sco_disconn_cfm():
sco_conn_del():
lock_sock(sk);
However, in sco_sock_connect, we call lock_sock before calling
hci_dev_lock inside sco_connect, thus inverting the lock hierarchy.
We fix this by pulling the call to hci_dev_lock out from sco_connect.
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/sco.c | 39 ++++++++++++++++-----------------------
1 file changed, 16 insertions(+), 23 deletions(-)
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index f4b997fb33d6..f681e7ce8945 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -209,44 +209,32 @@ static int sco_chan_add(struct sco_conn *conn, struct sock *sk,
return err;
}
-static int sco_connect(struct sock *sk)
+static int sco_connect(struct hci_dev *hdev, struct sock *sk)
{
struct sco_conn *conn;
struct hci_conn *hcon;
- struct hci_dev *hdev;
int err, type;
BT_DBG("%pMR -> %pMR", &sco_pi(sk)->src, &sco_pi(sk)->dst);
- hdev = hci_get_route(&sco_pi(sk)->dst, &sco_pi(sk)->src, BDADDR_BREDR);
- if (!hdev)
- return -EHOSTUNREACH;
-
- hci_dev_lock(hdev);
-
if (lmp_esco_capable(hdev) && !disable_esco)
type = ESCO_LINK;
else
type = SCO_LINK;
if (sco_pi(sk)->setting == BT_VOICE_TRANSPARENT &&
- (!lmp_transp_capable(hdev) || !lmp_esco_capable(hdev))) {
- err = -EOPNOTSUPP;
- goto done;
- }
+ (!lmp_transp_capable(hdev) || !lmp_esco_capable(hdev)))
+ return -EOPNOTSUPP;
hcon = hci_connect_sco(hdev, type, &sco_pi(sk)->dst,
sco_pi(sk)->setting);
- if (IS_ERR(hcon)) {
- err = PTR_ERR(hcon);
- goto done;
- }
+ if (IS_ERR(hcon))
+ return PTR_ERR(hcon);
conn = sco_conn_add(hcon);
if (!conn) {
hci_conn_drop(hcon);
- err = -ENOMEM;
- goto done;
+ return -ENOMEM;
}
/* Update source addr of the socket */
@@ -254,7 +242,7 @@ static int sco_connect(struct sock *sk)
err = sco_chan_add(conn, sk, NULL);
if (err)
- goto done;
+ return err;
if (hcon->state == BT_CONNECTED) {
sco_sock_clear_timer(sk);
@@ -264,9 +252,6 @@ static int sco_connect(struct sock *sk)
sco_sock_set_timer(sk, sk->sk_sndtimeo);
}
-done:
- hci_dev_unlock(hdev);
- hci_dev_put(hdev);
return err;
}
@@ -550,6 +535,7 @@ static int sco_sock_connect(struct socket *sock, struct sockaddr *addr, int alen
{
struct sockaddr_sco *sa = (struct sockaddr_sco *) addr;
struct sock *sk = sock->sk;
+ struct hci_dev *hdev;
int err;
BT_DBG("sk %p", sk);
@@ -564,12 +550,19 @@ static int sco_sock_connect(struct socket *sock, struct sockaddr *addr, int alen
if (sk->sk_type != SOCK_SEQPACKET)
return -EINVAL;
+ hdev = hci_get_route(&sa->sco_bdaddr, &sco_pi(sk)->src, BDADDR_BREDR);
+ if (!hdev)
+ return -EHOSTUNREACH;
+ hci_dev_lock(hdev);
+
lock_sock(sk);
/* Set destination address and psm */
bacpy(&sco_pi(sk)->dst, &sa->sco_bdaddr);
- err = sco_connect(sk);
+ err = sco_connect(hdev, sk);
+ hci_dev_unlock(hdev);
+ hci_dev_put(hdev);
if (err)
goto done;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 164/217] gpu: drm: amd: amdgpu: amdgpu_i2c: fix possible uninitialized-variable access in amdgpu_i2c_router_select_ddc_port()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (162 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 163/217] Bluetooth: avoid circular locks in sco_sock_connect Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 165/217] ARM: tegra: tamonten: Fix UART pad setting Greg Kroah-Hartman
` (55 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, TOTE Robot, Tuo Li, Alex Deucher,
Sasha Levin
From: Tuo Li <islituo@gmail.com>
[ Upstream commit a211260c34cfadc6068fece8c9e99e0fe1e2a2b6 ]
The variable val is declared without initialization, and its address is
passed to amdgpu_i2c_get_byte(). In this function, the value of val is
accessed in:
DRM_DEBUG("i2c 0x%02x 0x%02x read failed\n",
addr, *val);
Also, when amdgpu_i2c_get_byte() returns, val may remain uninitialized,
but it is accessed in:
val &= ~amdgpu_connector->router.ddc_mux_control_pin;
To fix this possible uninitialized-variable access, initialize val to 0 in
amdgpu_i2c_router_select_ddc_port().
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_i2c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_i2c.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_i2c.c
index f2739995c335..199eccee0b0b 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_i2c.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_i2c.c
@@ -338,7 +338,7 @@ static void amdgpu_i2c_put_byte(struct amdgpu_i2c_chan *i2c_bus,
void
amdgpu_i2c_router_select_ddc_port(const struct amdgpu_connector *amdgpu_connector)
{
- u8 val;
+ u8 val = 0;
if (!amdgpu_connector->router.ddc_valid)
return;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 165/217] ARM: tegra: tamonten: Fix UART pad setting
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (163 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 164/217] gpu: drm: amd: amdgpu: amdgpu_i2c: fix possible uninitialized-variable access in amdgpu_i2c_router_select_ddc_port() Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 166/217] rpc: fix gss_svc_init cleanup on failure Greg Kroah-Hartman
` (54 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andreas Obergschwandtner,
Thierry Reding, Sasha Levin
From: Andreas Obergschwandtner <andreas.obergschwandtner@gmail.com>
[ Upstream commit 2270ad2f4e123336af685ecedd1618701cb4ca1e ]
This patch fixes the tristate and pullup configuration for UART 1 to 3
on the Tamonten SOM.
Signed-off-by: Andreas Obergschwandtner <andreas.obergschwandtner@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/tegra20-tamonten.dtsi | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 872046d48709..4d69d67792d1 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -185,8 +185,9 @@ conf_ata {
nvidia,pins = "ata", "atb", "atc", "atd", "ate",
"cdev1", "cdev2", "dap1", "dtb", "gma",
"gmb", "gmc", "gmd", "gme", "gpu7",
- "gpv", "i2cp", "pta", "rm", "slxa",
- "slxk", "spia", "spib", "uac";
+ "gpv", "i2cp", "irrx", "irtx", "pta",
+ "rm", "slxa", "slxk", "spia", "spib",
+ "uac";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
@@ -211,7 +212,7 @@ conf_crtp {
conf_ddc {
nvidia,pins = "ddc", "dta", "dtd", "kbca",
"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
- "sdc";
+ "sdc", "uad", "uca";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
@@ -221,10 +222,9 @@ conf_hdint {
"lvp0", "owc", "sdb";
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- conf_irrx {
- nvidia,pins = "irrx", "irtx", "sdd", "spic",
- "spie", "spih", "uaa", "uab", "uad",
- "uca", "ucb";
+ conf_sdd {
+ nvidia,pins = "sdd", "spic", "spie", "spih",
+ "uaa", "uab", "ucb";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 166/217] rpc: fix gss_svc_init cleanup on failure
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (164 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 165/217] ARM: tegra: tamonten: Fix UART pad setting Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 167/217] staging: rts5208: Fix get_ms_information() heap buffer size Greg Kroah-Hartman
` (53 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, J. Bruce Fields, Chuck Lever, Sasha Levin
From: J. Bruce Fields <bfields@redhat.com>
[ Upstream commit 5a4753446253a427c0ff1e433b9c4933e5af207c ]
The failure case here should be rare, but it's obviously wrong.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/sunrpc/auth_gss/svcauth_gss.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c
index 27dfd85830d8..4f41a1bc59bf 100644
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -1861,7 +1861,7 @@ gss_svc_init_net(struct net *net)
goto out2;
return 0;
out2:
- destroy_use_gss_proxy_proc_entry(net);
+ rsi_cache_destroy_net(net);
out1:
rsc_cache_destroy_net(net);
return rv;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 167/217] staging: rts5208: Fix get_ms_information() heap buffer size
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (165 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 166/217] rpc: fix gss_svc_init cleanup on failure Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 168/217] gfs2: Dont call dlm after protocol is unmounted Greg Kroah-Hartman
` (52 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, linux-staging, Kees Cook, Sasha Levin
From: Kees Cook <keescook@chromium.org>
[ Upstream commit cbe34165cc1b7d1110b268ba8b9f30843c941639 ]
Fix buf allocation size (it needs to be 2 bytes larger). Found when
__alloc_size() annotations were added to kmalloc() interfaces.
In file included from ./include/linux/string.h:253,
from ./include/linux/bitmap.h:10,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/paravirt.h:17,
from ./arch/x86/include/asm/irqflags.h:63,
from ./include/linux/irqflags.h:16,
from ./include/linux/rcupdate.h:26,
from ./include/linux/rculist.h:11,
from ./include/linux/pid.h:5,
from ./include/linux/sched.h:14,
from ./include/linux/blkdev.h:5,
from drivers/staging/rts5208/rtsx_scsi.c:12:
In function 'get_ms_information',
inlined from 'ms_sp_cmnd' at drivers/staging/rts5208/rtsx_scsi.c:2877:12,
inlined from 'rtsx_scsi_handler' at drivers/staging/rts5208/rtsx_scsi.c:3247:12:
./include/linux/fortify-string.h:54:29: warning: '__builtin_memcpy' forming offset [106, 107] is out
of the bounds [0, 106] [-Warray-bounds]
54 | #define __underlying_memcpy __builtin_memcpy
| ^
./include/linux/fortify-string.h:417:2: note: in expansion of macro '__underlying_memcpy'
417 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
./include/linux/fortify-string.h:463:26: note: in expansion of macro '__fortify_memcpy_chk'
463 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/staging/rts5208/rtsx_scsi.c:2851:3: note: in expansion of macro 'memcpy'
2851 | memcpy(buf + i, ms_card->raw_sys_info, 96);
| ^~~~~~
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210818044252.1533634-1-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/rts5208/rtsx_scsi.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/rts5208/rtsx_scsi.c b/drivers/staging/rts5208/rtsx_scsi.c
index a401b13f5f5e..c46ac0e5e852 100644
--- a/drivers/staging/rts5208/rtsx_scsi.c
+++ b/drivers/staging/rts5208/rtsx_scsi.c
@@ -3026,10 +3026,10 @@ static int get_ms_information(struct scsi_cmnd *srb, struct rtsx_chip *chip)
}
if (dev_info_id == 0x15) {
- buf_len = 0x3A;
+ buf_len = 0x3C;
data_len = 0x3A;
} else {
- buf_len = 0x6A;
+ buf_len = 0x6C;
data_len = 0x6A;
}
@@ -3081,11 +3081,7 @@ static int get_ms_information(struct scsi_cmnd *srb, struct rtsx_chip *chip)
}
rtsx_stor_set_xfer_buf(buf, buf_len, srb);
-
- if (dev_info_id == 0x15)
- scsi_set_resid(srb, scsi_bufflen(srb) - 0x3C);
- else
- scsi_set_resid(srb, scsi_bufflen(srb) - 0x6C);
+ scsi_set_resid(srb, scsi_bufflen(srb) - buf_len);
kfree(buf);
return STATUS_SUCCESS;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 168/217] gfs2: Dont call dlm after protocol is unmounted
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (166 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 167/217] staging: rts5208: Fix get_ms_information() heap buffer size Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 169/217] mmc: sdhci-of-arasan: Check return value of non-void funtions Greg Kroah-Hartman
` (51 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Bob Peterson, Sasha Levin
From: Bob Peterson <rpeterso@redhat.com>
[ Upstream commit d1340f80f0b8066321b499a376780da00560e857 ]
In the gfs2 withdraw sequence, the dlm protocol is unmounted with a call
to lm_unmount. After a withdraw, users are allowed to unmount the
withdrawn file system. But at that point we may still have glocks left
over that we need to free via unmount's call to gfs2_gl_hash_clear.
These glocks may have never been completed because of whatever problem
caused the withdraw (IO errors or whatever).
Before this patch, function gdlm_put_lock would still try to call into
dlm to unlock these leftover glocks, which resulted in dlm returning
-EINVAL because the lock space was abandoned. These glocks were never
freed because there was no mechanism after that to free them.
This patch adds a check to gdlm_put_lock to see if the locking protocol
was inactive (DFL_UNMOUNT flag) and if so, free the glock and not
make the invalid call into dlm.
I could have combined this "if" with the one that follows, related to
leftover glock LVBs, but I felt the code was more readable with its own
if clause.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/gfs2/lock_dlm.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/fs/gfs2/lock_dlm.c b/fs/gfs2/lock_dlm.c
index de733a6c30bb..f3c16a504c8d 100644
--- a/fs/gfs2/lock_dlm.c
+++ b/fs/gfs2/lock_dlm.c
@@ -295,6 +295,11 @@ static void gdlm_put_lock(struct gfs2_glock *gl)
gfs2_sbstats_inc(gl, GFS2_LKS_DCOUNT);
gfs2_update_request_times(gl);
+ /* don't want to call dlm if we've unmounted the lock protocol */
+ if (test_bit(DFL_UNMOUNT, &ls->ls_recover_flags)) {
+ gfs2_glock_free(gl);
+ return;
+ }
/* don't want to skip dlm_unlock writing the lvb when lock has one */
if (test_bit(SDF_SKIP_DLM_UNLOCK, &sdp->sd_flags) &&
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 169/217] mmc: sdhci-of-arasan: Check return value of non-void funtions
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (167 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 168/217] gfs2: Dont call dlm after protocol is unmounted Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 170/217] mmc: rtsx_pci: Fix long reads when clock is prescaled Greg Kroah-Hartman
` (50 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Manish Narani, Adrian Hunter,
Ulf Hansson, Sasha Levin
From: Manish Narani <manish.narani@xilinx.com>
[ Upstream commit 66bad6ed2204fdb78a0a8fb89d824397106a5471 ]
At a couple of places, the return values of the non-void functions were
not getting checked. This was reported by the coverity tool. Modify the
code to check the return values of the same.
Addresses-Coverity: ("check_return")
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1623753837-21035-5-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/sdhci-of-arasan.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index e033ad477715..0a2bfd034df3 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -179,7 +179,12 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
* through low speeds without power cycling.
*/
sdhci_set_clock(host, host->max_clk);
- phy_power_on(sdhci_arasan->phy);
+ if (phy_power_on(sdhci_arasan->phy)) {
+ pr_err("%s: Cannot power on phy.\n",
+ mmc_hostname(host->mmc));
+ return;
+ }
+
sdhci_arasan->is_phy_on = true;
/*
@@ -205,7 +210,12 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
sdhci_set_clock(host, clock);
if (ctrl_phy) {
- phy_power_on(sdhci_arasan->phy);
+ if (phy_power_on(sdhci_arasan->phy)) {
+ pr_err("%s: Cannot power on phy.\n",
+ mmc_hostname(host->mmc));
+ return;
+ }
+
sdhci_arasan->is_phy_on = true;
}
}
@@ -305,7 +315,9 @@ static int sdhci_arasan_suspend(struct device *dev)
ret = phy_power_off(sdhci_arasan->phy);
if (ret) {
dev_err(dev, "Cannot power off phy.\n");
- sdhci_resume_host(host);
+ if (sdhci_resume_host(host))
+ dev_err(dev, "Cannot resume host.\n");
+
return ret;
}
sdhci_arasan->is_phy_on = false;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 170/217] mmc: rtsx_pci: Fix long reads when clock is prescaled
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (168 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 169/217] mmc: sdhci-of-arasan: Check return value of non-void funtions Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 171/217] selftests/bpf: Enlarge select() timeout for test_maps Greg Kroah-Hartman
` (49 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Thomas Hebb, Ulf Hansson, Sasha Levin
From: Thomas Hebb <tommyhebb@gmail.com>
[ Upstream commit 3ac5e45291f3f0d699a721357380d4593bc2dcb3 ]
For unexplained reasons, the prescaler register for this device needs to
be cleared (set to 1) while performing a data read or else the command
will hang. This does not appear to affect the real clock rate sent out
on the bus, so I assume it's purely to work around a hardware bug.
During normal operation, the prescaler is already set to 1, so nothing
needs to be done. However, in "initial mode" (which is used for sub-MHz
clock speeds, like the core sets while enumerating cards), it's set to
128 and so we need to reset it during data reads. We currently fail to
do this for long reads.
This has no functional affect on the driver's operation currently
written, as the MMC core always sets a clock above 1MHz before
attempting any long reads. However, the core could conceivably set any
clock speed at any time and the driver should still work, so I think
this fix is worthwhile.
I personally encountered this issue while performing data recovery on an
external chip. My connections had poor signal integrity, so I modified
the core code to reduce the clock speed. Without this change, I saw the
card enumerate but was unable to actually read any data.
Writes don't seem to work in the situation described above even with
this change (and even if the workaround is extended to encompass data
write commands). I was not able to find a way to get them working.
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Link: https://lore.kernel.org/r/2fef280d8409ab0100c26c6ac7050227defd098d.1627818365.git.tommyhebb@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/rtsx_pci_sdmmc.c | 36 ++++++++++++++++++++-----------
1 file changed, 23 insertions(+), 13 deletions(-)
diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index 41b57713b620..9de6a32f0c9f 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -551,9 +551,22 @@ static int sd_write_long_data(struct realtek_pci_sdmmc *host,
return 0;
}
+static inline void sd_enable_initial_mode(struct realtek_pci_sdmmc *host)
+{
+ rtsx_pci_write_register(host->pcr, SD_CFG1,
+ SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_128);
+}
+
+static inline void sd_disable_initial_mode(struct realtek_pci_sdmmc *host)
+{
+ rtsx_pci_write_register(host->pcr, SD_CFG1,
+ SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_0);
+}
+
static int sd_rw_multi(struct realtek_pci_sdmmc *host, struct mmc_request *mrq)
{
struct mmc_data *data = mrq->data;
+ int err;
if (host->sg_count < 0) {
data->error = host->sg_count;
@@ -562,22 +575,19 @@ static int sd_rw_multi(struct realtek_pci_sdmmc *host, struct mmc_request *mrq)
return data->error;
}
- if (data->flags & MMC_DATA_READ)
- return sd_read_long_data(host, mrq);
+ if (data->flags & MMC_DATA_READ) {
+ if (host->initial_mode)
+ sd_disable_initial_mode(host);
- return sd_write_long_data(host, mrq);
-}
+ err = sd_read_long_data(host, mrq);
-static inline void sd_enable_initial_mode(struct realtek_pci_sdmmc *host)
-{
- rtsx_pci_write_register(host->pcr, SD_CFG1,
- SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_128);
-}
+ if (host->initial_mode)
+ sd_enable_initial_mode(host);
-static inline void sd_disable_initial_mode(struct realtek_pci_sdmmc *host)
-{
- rtsx_pci_write_register(host->pcr, SD_CFG1,
- SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_0);
+ return err;
+ }
+
+ return sd_write_long_data(host, mrq);
}
static void sd_normal_rw(struct realtek_pci_sdmmc *host,
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 171/217] selftests/bpf: Enlarge select() timeout for test_maps
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (169 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 170/217] mmc: rtsx_pci: Fix long reads when clock is prescaled Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 172/217] cifs: fix wrong release in sess_alloc_buffer() failed path Greg Kroah-Hartman
` (48 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Li Zhijian,
Alexei Starovoitov, Song Liu, Sasha Levin
From: Li Zhijian <lizhijian@cn.fujitsu.com>
[ Upstream commit 2d82d73da35b72b53fe0d96350a2b8d929d07e42 ]
0Day robot observed that it's easily timeout on a heavy load host.
-------------------
# selftests: bpf: test_maps
# Fork 1024 tasks to 'test_update_delete'
# Fork 1024 tasks to 'test_update_delete'
# Fork 100 tasks to 'test_hashmap'
# Fork 100 tasks to 'test_hashmap_percpu'
# Fork 100 tasks to 'test_hashmap_sizes'
# Fork 100 tasks to 'test_hashmap_walk'
# Fork 100 tasks to 'test_arraymap'
# Fork 100 tasks to 'test_arraymap_percpu'
# Failed sockmap unexpected timeout
not ok 3 selftests: bpf: test_maps # exit=1
# selftests: bpf: test_lru_map
# nr_cpus:8
-------------------
Since this test will be scheduled by 0Day to a random host that could have
only a few cpus(2-8), enlarge the timeout to avoid a false NG report.
In practice, i tried to pin it to only one cpu by 'taskset 0x01 ./test_maps',
and knew 10S is likely enough, but i still perfer to a larger value 30.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210820015556.23276-2-lizhijian@cn.fujitsu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/bpf/test_maps.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/test_maps.c b/tools/testing/selftests/bpf/test_maps.c
index 96c6238a4a1f..3f503ad37a2b 100644
--- a/tools/testing/selftests/bpf/test_maps.c
+++ b/tools/testing/selftests/bpf/test_maps.c
@@ -730,7 +730,7 @@ static void test_sockmap(int tasks, void *data)
FD_ZERO(&w);
FD_SET(sfd[3], &w);
- to.tv_sec = 1;
+ to.tv_sec = 30;
to.tv_usec = 0;
s = select(sfd[3] + 1, &w, NULL, NULL, &to);
if (s == -1) {
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 172/217] cifs: fix wrong release in sess_alloc_buffer() failed path
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (170 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 171/217] selftests/bpf: Enlarge select() timeout for test_maps Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 173/217] Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set" Greg Kroah-Hartman
` (47 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ding Hui, Paulo Alcantara (SUSE),
Steve French, Sasha Levin
From: Ding Hui <dinghui@sangfor.com.cn>
[ Upstream commit d72c74197b70bc3c95152f351a568007bffa3e11 ]
smb_buf is allocated by small_smb_init_no_tc(), and buf type is
CIFS_SMALL_BUFFER, so we should use cifs_small_buf_release() to
release it in failed path.
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/cifs/sess.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index aa23c00367ec..0113dba28eb0 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -602,7 +602,7 @@ sess_alloc_buffer(struct sess_data *sess_data, int wct)
return 0;
out_free_smb_buf:
- kfree(smb_buf);
+ cifs_small_buf_release(smb_buf);
sess_data->iov[0].iov_base = NULL;
sess_data->iov[0].iov_len = 0;
sess_data->buf0_type = CIFS_NO_BUFFER;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 173/217] Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set"
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (171 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 172/217] cifs: fix wrong release in sess_alloc_buffer() failed path Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 174/217] usb: musb: musb_dsps: request_irq() after initializing musb Greg Kroah-Hartman
` (46 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mathias Nyman, Sasha Levin
From: Mathias Nyman <mathias.nyman@linux.intel.com>
[ Upstream commit 2847c46c61486fd8bca9136a6e27177212e78c69 ]
This reverts commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760.
That commit effectively disabled Intel host initiated U1/U2 lpm for devices
with periodic endpoints.
Before that commit we disabled host initiated U1/U2 lpm if the exit latency
was larger than any periodic endpoint service interval, this is according
to xhci spec xhci 1.1 specification section 4.23.5.2
After that commit we incorrectly checked that service interval was smaller
than U1/U2 inactivity timeout. This is not relevant, and can't happen for
Intel hosts as previously set U1/U2 timeout = 105% * service interval.
Patch claimed it solved cases where devices can't be enumerated because of
bandwidth issues. This might be true but it's a side effect of accidentally
turning off lpm.
exit latency calculations have been revised since then
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/host/xhci.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 3cab64f2e861..e4a82da434c2 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4400,19 +4400,19 @@ static u16 xhci_calculate_u1_timeout(struct xhci_hcd *xhci,
{
unsigned long long timeout_ns;
- if (xhci->quirks & XHCI_INTEL_HOST)
- timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc);
- else
- timeout_ns = udev->u1_params.sel;
-
/* Prevent U1 if service interval is shorter than U1 exit latency */
if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
- if (xhci_service_interval_to_ns(desc) <= timeout_ns) {
+ if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) {
dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n");
return USB3_LPM_DISABLED;
}
}
+ if (xhci->quirks & XHCI_INTEL_HOST)
+ timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc);
+ else
+ timeout_ns = udev->u1_params.sel;
+
/* The U1 timeout is encoded in 1us intervals.
* Don't return a timeout of zero, because that's USB3_LPM_DISABLED.
*/
@@ -4464,19 +4464,19 @@ static u16 xhci_calculate_u2_timeout(struct xhci_hcd *xhci,
{
unsigned long long timeout_ns;
- if (xhci->quirks & XHCI_INTEL_HOST)
- timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc);
- else
- timeout_ns = udev->u2_params.sel;
-
/* Prevent U2 if service interval is shorter than U2 exit latency */
if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
- if (xhci_service_interval_to_ns(desc) <= timeout_ns) {
+ if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) {
dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n");
return USB3_LPM_DISABLED;
}
}
+ if (xhci->quirks & XHCI_INTEL_HOST)
+ timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc);
+ else
+ timeout_ns = udev->u2_params.sel;
+
/* The U2 timeout is encoded in 256us intervals */
timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 256 * 1000);
/* If the necessary timeout value is bigger than what we can set in the
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 174/217] usb: musb: musb_dsps: request_irq() after initializing musb
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (172 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 173/217] Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set" Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 175/217] usbip: give back URBs for unsent unlink requests during cleanup Greg Kroah-Hartman
` (45 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Nadezda Lutovinova, Sasha Levin
From: Nadezda Lutovinova <lutovinova@ispras.ru>
[ Upstream commit 7c75bde329d7e2a93cf86a5c15c61f96f1446cdc ]
If IRQ occurs between calling dsps_setup_optional_vbus_irq()
and dsps_create_musb_pdev(), then null pointer dereference occurs
since glue->musb wasn't initialized yet.
The patch puts initializing of neccesery data before registration
of the interrupt handler.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210819163323.17714-1-lutovinova@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/musb/musb_dsps.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index b7d460adaa61..a582c3847dc2 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -930,23 +930,22 @@ static int dsps_probe(struct platform_device *pdev)
if (!glue->usbss_base)
return -ENXIO;
- if (usb_get_dr_mode(&pdev->dev) == USB_DR_MODE_PERIPHERAL) {
- ret = dsps_setup_optional_vbus_irq(pdev, glue);
- if (ret)
- goto err_iounmap;
- }
-
platform_set_drvdata(pdev, glue);
pm_runtime_enable(&pdev->dev);
ret = dsps_create_musb_pdev(glue, pdev);
if (ret)
goto err;
+ if (usb_get_dr_mode(&pdev->dev) == USB_DR_MODE_PERIPHERAL) {
+ ret = dsps_setup_optional_vbus_irq(pdev, glue);
+ if (ret)
+ goto err;
+ }
+
return 0;
err:
pm_runtime_disable(&pdev->dev);
-err_iounmap:
iounmap(glue->usbss_base);
return ret;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 175/217] usbip: give back URBs for unsent unlink requests during cleanup
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (173 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 174/217] usb: musb: musb_dsps: request_irq() after initializing musb Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 176/217] usbip:vhci_hcd USB port can get stuck in the disabled state Greg Kroah-Hartman
` (44 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+74d6ef051d3d2eacf428,
Shuah Khan, Anirudh Rayabharam, Sasha Levin
From: Anirudh Rayabharam <mail@anirudhrb.com>
[ Upstream commit 258c81b341c8025d79073ce2d6ce19dcdc7d10d2 ]
In vhci_device_unlink_cleanup(), the URBs for unsent unlink requests are
not given back. This sometimes causes usb_kill_urb to wait indefinitely
for that urb to be given back. syzbot has reported a hung task issue [1]
for this.
To fix this, give back the urbs corresponding to unsent unlink requests
(unlink_tx list) similar to how urbs corresponding to unanswered unlink
requests (unlink_rx list) are given back.
[1]: https://syzkaller.appspot.com/bug?id=08f12df95ae7da69814e64eb5515d5a85ed06b76
Reported-by: syzbot+74d6ef051d3d2eacf428@syzkaller.appspotmail.com
Tested-by: syzbot+74d6ef051d3d2eacf428@syzkaller.appspotmail.com
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20210820190122.16379-2-mail@anirudhrb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/usbip/vhci_hcd.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 9833f307d70e..709214df2c18 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -971,8 +971,32 @@ static void vhci_device_unlink_cleanup(struct vhci_device *vdev)
spin_lock(&vdev->priv_lock);
list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) {
+ struct urb *urb;
+
+ /* give back urb of unsent unlink request */
pr_info("unlink cleanup tx %lu\n", unlink->unlink_seqnum);
+
+ urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum);
+ if (!urb) {
+ list_del(&unlink->list);
+ kfree(unlink);
+ continue;
+ }
+
+ urb->status = -ENODEV;
+
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+
list_del(&unlink->list);
+
+ spin_unlock(&vdev->priv_lock);
+ spin_unlock_irqrestore(&vhci->lock, flags);
+
+ usb_hcd_giveback_urb(hcd, urb, urb->status);
+
+ spin_lock_irqsave(&vhci->lock, flags);
+ spin_lock(&vdev->priv_lock);
+
kfree(unlink);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 176/217] usbip:vhci_hcd USB port can get stuck in the disabled state
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (174 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 175/217] usbip: give back URBs for unsent unlink requests during cleanup Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 177/217] ASoC: rockchip: i2s: Fix regmap_ops hang Greg Kroah-Hartman
` (43 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Michael, Shuah Khan, Sasha Levin
From: Shuah Khan <skhan@linuxfoundation.org>
[ Upstream commit 66cce9e73ec61967ed1f97f30cee79bd9a2bb7ee ]
When a remote usb device is attached to the local Virtual USB
Host Controller Root Hub port, the bound device driver may send
a port reset command.
vhci_hcd accepts port resets only when the device doesn't have
port address assigned to it. When reset happens device is in
assigned/used state and vhci_hcd rejects it leaving the port in
a stuck state.
This problem was found when a blue-tooth or xbox wireless dongle
was passed through using usbip.
A few drivers reset the port during probe including mt76 driver
specific to this bug report. Fix the problem with a change to
honor reset requests when device is in used state (VDEV_ST_USED).
Reported-and-tested-by: Michael <msbroadf@gmail.com>
Suggested-by: Michael <msbroadf@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210819225937.41037-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/usbip/vhci_hcd.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 709214df2c18..22e8cda7a137 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -469,8 +469,14 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_RESET);
vhci_hcd->re_timeout = 0;
+ /*
+ * A few drivers do usb reset during probe when
+ * the device could be in VDEV_ST_USED state
+ */
if (vhci_hcd->vdev[rhport].ud.status ==
- VDEV_ST_NOTASSIGNED) {
+ VDEV_ST_NOTASSIGNED ||
+ vhci_hcd->vdev[rhport].ud.status ==
+ VDEV_ST_USED) {
usbip_dbg_vhci_rh(
" enable rhport %d (status %u)\n",
rhport,
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 177/217] ASoC: rockchip: i2s: Fix regmap_ops hang
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (175 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 176/217] usbip:vhci_hcd USB port can get stuck in the disabled state Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 178/217] ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B Greg Kroah-Hartman
` (42 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sugar Zhang, Mark Brown, Sasha Levin
From: Sugar Zhang <sugar.zhang@rock-chips.com>
[ Upstream commit 53ca9b9777b95cdd689181d7c547e38dc79adad0 ]
API 'set_fmt' maybe called when PD is off, in the situation,
any register access will hang the system. so, enable PD
before r/w register.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1629950520-14190-4-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/rockchip/rockchip_i2s.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c
index 0e07e3dea7de..93a4829f80cc 100644
--- a/sound/soc/rockchip/rockchip_i2s.c
+++ b/sound/soc/rockchip/rockchip_i2s.c
@@ -188,7 +188,9 @@ static int rockchip_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
{
struct rk_i2s_dev *i2s = to_info(cpu_dai);
unsigned int mask = 0, val = 0;
+ int ret = 0;
+ pm_runtime_get_sync(cpu_dai->dev);
mask = I2S_CKR_MSS_MASK;
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
@@ -201,7 +203,8 @@ static int rockchip_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
i2s->is_master_mode = false;
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_pm_put;
}
regmap_update_bits(i2s->regmap, I2S_CKR, mask, val);
@@ -215,7 +218,8 @@ static int rockchip_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
val = I2S_CKR_CKP_POS;
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_pm_put;
}
regmap_update_bits(i2s->regmap, I2S_CKR, mask, val);
@@ -238,7 +242,8 @@ static int rockchip_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
val = I2S_TXCR_TFS_PCM | I2S_TXCR_PBM_MODE(1);
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_pm_put;
}
regmap_update_bits(i2s->regmap, I2S_TXCR, mask, val);
@@ -261,12 +266,16 @@ static int rockchip_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
val = I2S_RXCR_TFS_PCM | I2S_RXCR_PBM_MODE(1);
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_pm_put;
}
regmap_update_bits(i2s->regmap, I2S_RXCR, mask, val);
- return 0;
+err_pm_put:
+ pm_runtime_put(cpu_dai->dev);
+
+ return ret;
}
static int rockchip_i2s_hw_params(struct snd_pcm_substream *substream,
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 178/217] ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (176 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 177/217] ASoC: rockchip: i2s: Fix regmap_ops hang Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 179/217] parport: remove non-zero check on count Greg Kroah-Hartman
` (41 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Xiaotan Luo, Sugar Zhang, Mark Brown,
Sasha Levin
From: Xiaotan Luo <lxt@rock-chips.com>
[ Upstream commit 1bf56843e664eef2525bdbfae6a561e98910f676 ]
- DSP_A: PCM delay 1 bit mode, L data MSB after FRM LRC
- DSP_B: PCM no delay mode, L data MSB during FRM LRC
Signed-off-by: Xiaotan Luo <lxt@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1629950562-14281-3-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/rockchip/rockchip_i2s.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c
index 93a4829f80cc..8d1a7114f6c2 100644
--- a/sound/soc/rockchip/rockchip_i2s.c
+++ b/sound/soc/rockchip/rockchip_i2s.c
@@ -235,12 +235,12 @@ static int rockchip_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
case SND_SOC_DAIFMT_I2S:
val = I2S_TXCR_IBM_NORMAL;
break;
- case SND_SOC_DAIFMT_DSP_A: /* PCM no delay mode */
- val = I2S_TXCR_TFS_PCM;
- break;
- case SND_SOC_DAIFMT_DSP_B: /* PCM delay 1 mode */
+ case SND_SOC_DAIFMT_DSP_A: /* PCM delay 1 bit mode */
val = I2S_TXCR_TFS_PCM | I2S_TXCR_PBM_MODE(1);
break;
+ case SND_SOC_DAIFMT_DSP_B: /* PCM no delay mode */
+ val = I2S_TXCR_TFS_PCM;
+ break;
default:
ret = -EINVAL;
goto err_pm_put;
@@ -259,12 +259,12 @@ static int rockchip_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
case SND_SOC_DAIFMT_I2S:
val = I2S_RXCR_IBM_NORMAL;
break;
- case SND_SOC_DAIFMT_DSP_A: /* PCM no delay mode */
- val = I2S_RXCR_TFS_PCM;
- break;
- case SND_SOC_DAIFMT_DSP_B: /* PCM delay 1 mode */
+ case SND_SOC_DAIFMT_DSP_A: /* PCM delay 1 bit mode */
val = I2S_RXCR_TFS_PCM | I2S_RXCR_PBM_MODE(1);
break;
+ case SND_SOC_DAIFMT_DSP_B: /* PCM no delay mode */
+ val = I2S_RXCR_TFS_PCM;
+ break;
default:
ret = -EINVAL;
goto err_pm_put;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 179/217] parport: remove non-zero check on count
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (177 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 178/217] ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 180/217] ath9k: fix OOB read ar9300_eeprom_restore_internal Greg Kroah-Hartman
` (40 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sudip Mukherjee, Colin Ian King, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit 0be883a0d795d9146f5325de582584147dd0dcdc ]
The check for count appears to be incorrect since a non-zero count
check occurs a couple of statements earlier. Currently the check is
always false and the dev->port->irq != PARPORT_IRQ_NONE part of the
check is never tested and the if statement is dead-code. Fix this
by removing the check on count.
Note that this code is pre-git history, so I can't find a sha for
it.
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Logically dead code")
Link: https://lore.kernel.org/r/20210730100710.27405-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/parport/ieee1284_ops.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/parport/ieee1284_ops.c b/drivers/parport/ieee1284_ops.c
index 5d41dda6da4e..75daa16f38b7 100644
--- a/drivers/parport/ieee1284_ops.c
+++ b/drivers/parport/ieee1284_ops.c
@@ -535,7 +535,7 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
goto out;
/* Yield the port for a while. */
- if (count && dev->port->irq != PARPORT_IRQ_NONE) {
+ if (dev->port->irq != PARPORT_IRQ_NONE) {
parport_release (dev);
schedule_timeout_interruptible(msecs_to_jiffies(40));
parport_claim_or_block (dev);
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 180/217] ath9k: fix OOB read ar9300_eeprom_restore_internal
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (178 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 179/217] parport: remove non-zero check on count Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 181/217] ath9k: fix sleeping in atomic context Greg Kroah-Hartman
` (39 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zekun Shen, Kalle Valo, Sasha Levin
From: Zekun Shen <bruceshenzk@gmail.com>
[ Upstream commit 23151b9ae79e3bc4f6a0c4cd3a7f355f68dad128 ]
Bad header can have large length field which can cause OOB.
cptr is the last bytes for read, and the eeprom is parsed
from high to low address. The OOB, triggered by the condition
length > cptr could cause memory error with a read on
negative index.
There are some sanity check around length, but it is not
compared with cptr (the remaining bytes). Here, the
corrupted/bad EEPROM can cause panic.
I was able to reproduce the crash, but I cannot find the
log and the reproducer now. After I applied the patch, the
bug is no longer reproducible.
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YM3xKsQJ0Hw2hjrc@Zekuns-MBP-16.fios-router.home
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 76385834a7de..694a58b1e995 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3346,7 +3346,8 @@ static int ar9300_eeprom_restore_internal(struct ath_hw *ah,
"Found block at %x: code=%d ref=%d length=%d major=%d minor=%d\n",
cptr, code, reference, length, major, minor);
if ((!AR_SREV_9485(ah) && length >= 1024) ||
- (AR_SREV_9485(ah) && length > EEPROM_DATA_LEN_9485)) {
+ (AR_SREV_9485(ah) && length > EEPROM_DATA_LEN_9485) ||
+ (length > cptr)) {
ath_dbg(common, EEPROM, "Skipping bad header\n");
cptr -= COMP_HDR_LEN;
continue;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 181/217] ath9k: fix sleeping in atomic context
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (179 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 180/217] ath9k: fix OOB read ar9300_eeprom_restore_internal Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 182/217] net: fix NULL pointer reference in cipso_v4_doi_free Greg Kroah-Hartman
` (38 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Miaoqing Pan, Kalle Valo, Sasha Levin
From: Miaoqing Pan <miaoqing@codeaurora.org>
[ Upstream commit 7c48662b9d56666219f526a71ace8c15e6e12f1f ]
The problem is that gpio_free() can sleep and the cfg_soc() can be
called with spinlocks held. One problematic call tree is:
--> ath_reset_internal() takes &sc->sc_pcu_lock spin lock
--> ath9k_hw_reset()
--> ath9k_hw_gpio_request_in()
--> ath9k_hw_gpio_request()
--> ath9k_hw_gpio_cfg_soc()
Remove gpio_free(), use error message instead, so we should make sure
there is no GPIO conflict.
Also remove ath9k_hw_gpio_free() from ath9k_hw_apply_gpio_override(),
as gpio_mask will never be set for SOC chips.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1628481916-15030-1-git-send-email-miaoqing@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath9k/hw.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 933d4f49d6b0..9e3db55a8684 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1595,7 +1595,6 @@ static void ath9k_hw_apply_gpio_override(struct ath_hw *ah)
ath9k_hw_gpio_request_out(ah, i, NULL,
AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
ath9k_hw_set_gpio(ah, i, !!(ah->gpio_val & BIT(i)));
- ath9k_hw_gpio_free(ah, i);
}
}
@@ -2702,14 +2701,17 @@ static void ath9k_hw_gpio_cfg_output_mux(struct ath_hw *ah, u32 gpio, u32 type)
static void ath9k_hw_gpio_cfg_soc(struct ath_hw *ah, u32 gpio, bool out,
const char *label)
{
+ int err;
+
if (ah->caps.gpio_requested & BIT(gpio))
return;
- /* may be requested by BSP, free anyway */
- gpio_free(gpio);
-
- if (gpio_request_one(gpio, out ? GPIOF_OUT_INIT_LOW : GPIOF_IN, label))
+ err = gpio_request_one(gpio, out ? GPIOF_OUT_INIT_LOW : GPIOF_IN, label);
+ if (err) {
+ ath_err(ath9k_hw_common(ah), "request GPIO%d failed:%d\n",
+ gpio, err);
return;
+ }
ah->caps.gpio_requested |= BIT(gpio);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 182/217] net: fix NULL pointer reference in cipso_v4_doi_free
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (180 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 181/217] ath9k: fix sleeping in atomic context Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 183/217] net: w5100: check return value after calling platform_get_resource() Greg Kroah-Hartman
` (37 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Abaci, Michael Wang, David S. Miller,
Sasha Levin
From: 王贇 <yun.wang@linux.alibaba.com>
[ Upstream commit 733c99ee8be9a1410287cdbb943887365e83b2d6 ]
In netlbl_cipsov4_add_std() when 'doi_def->map.std' alloc
failed, we sometime observe panic:
BUG: kernel NULL pointer dereference, address:
...
RIP: 0010:cipso_v4_doi_free+0x3a/0x80
...
Call Trace:
netlbl_cipsov4_add_std+0xf4/0x8c0
netlbl_cipsov4_add+0x13f/0x1b0
genl_family_rcv_msg_doit.isra.15+0x132/0x170
genl_rcv_msg+0x125/0x240
This is because in cipso_v4_doi_free() there is no check
on 'doi_def->map.std' when 'doi_def->type' equal 1, which
is possibe, since netlbl_cipsov4_add_std() haven't initialize
it before alloc 'doi_def->map.std'.
This patch just add the check to prevent panic happen for similar
cases.
Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netlabel/netlabel_cipso_v4.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/netlabel/netlabel_cipso_v4.c b/net/netlabel/netlabel_cipso_v4.c
index 0559d442ad80..e252f62bb8c2 100644
--- a/net/netlabel/netlabel_cipso_v4.c
+++ b/net/netlabel/netlabel_cipso_v4.c
@@ -156,8 +156,8 @@ static int netlbl_cipsov4_add_std(struct genl_info *info,
return -ENOMEM;
doi_def->map.std = kzalloc(sizeof(*doi_def->map.std), GFP_KERNEL);
if (doi_def->map.std == NULL) {
- ret_val = -ENOMEM;
- goto add_std_failure;
+ kfree(doi_def);
+ return -ENOMEM;
}
doi_def->type = CIPSO_V4_MAP_TRANS;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 183/217] net: w5100: check return value after calling platform_get_resource()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (181 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 182/217] net: fix NULL pointer reference in cipso_v4_doi_free Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 184/217] parisc: fix crash with signals and alloca Greg Kroah-Hartman
` (36 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yang Yingliang, David S. Miller, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit a39ff4a47f3e1da3b036817ef436b1a9be10783a ]
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/wiznet/w5100.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/wiznet/w5100.c b/drivers/net/ethernet/wiznet/w5100.c
index 2bdfb39215e9..87610d8b3462 100644
--- a/drivers/net/ethernet/wiznet/w5100.c
+++ b/drivers/net/ethernet/wiznet/w5100.c
@@ -1059,6 +1059,8 @@ static int w5100_mmio_probe(struct platform_device *pdev)
mac_addr = data->mac_addr;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem)
+ return -EINVAL;
if (resource_size(mem) < W5100_BUS_DIRECT_SIZE)
ops = &w5100_mmio_indirect_ops;
else
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 184/217] parisc: fix crash with signals and alloca
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (182 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 183/217] net: w5100: check return value after calling platform_get_resource() Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 185/217] scsi: BusLogic: Fix missing pr_cont() use Greg Kroah-Hartman
` (35 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mikulas Patocka, Helge Deller
From: Mikulas Patocka <mpatocka@redhat.com>
commit 030f653078316a9cc9ca6bd1b0234dcf858be35d upstream.
I was debugging some crashes on parisc and I found out that there is a
crash possibility if a function using alloca is interrupted by a signal.
The reason for the crash is that the gcc alloca implementation leaves
garbage in the upper 32 bits of the sp register. This normally doesn't
matter (the upper bits are ignored because the PSW W-bit is clear),
however the signal delivery routine in the kernel uses full 64 bits of sp
and it fails with -EFAULT if the upper 32 bits are not zero.
I created this program that demonstrates the problem:
#include <stdlib.h>
#include <unistd.h>
#include <signal.h>
#include <alloca.h>
static __attribute__((noinline,noclone)) void aa(int *size)
{
void * volatile p = alloca(-*size);
while (1) ;
}
static void handler(int sig)
{
write(1, "signal delivered\n", 17);
_exit(0);
}
int main(void)
{
int size = -0x100;
signal(SIGALRM, handler);
alarm(1);
aa(&size);
}
If you compile it with optimizations, it will crash.
The "aa" function has this disassembly:
000106a0 <aa>:
106a0: 08 03 02 41 copy r3,r1
106a4: 08 1e 02 43 copy sp,r3
106a8: 6f c1 00 80 stw,ma r1,40(sp)
106ac: 37 dc 3f c1 ldo -20(sp),ret0
106b0: 0c 7c 12 90 stw ret0,8(r3)
106b4: 0f 40 10 9c ldw 0(r26),ret0 ; ret0 = 0x00000000FFFFFF00
106b8: 97 9c 00 7e subi 3f,ret0,ret0 ; ret0 = 0xFFFFFFFF0000013F
106bc: d7 80 1c 1a depwi 0,31,6,ret0 ; ret0 = 0xFFFFFFFF00000100
106c0: 0b 9e 0a 1e add,l sp,ret0,sp ; sp = 0xFFFFFFFFxxxxxxxx
106c4: e8 1f 1f f7 b,l,n 106c4 <aa+0x24>,r0
This patch fixes the bug by truncating the "usp" variable to 32 bits.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/parisc/kernel/signal.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -242,6 +242,12 @@ setup_rt_frame(struct ksignal *ksig, sig
#endif
usp = (regs->gr[30] & ~(0x01UL));
+#ifdef CONFIG_64BIT
+ if (is_compat_task()) {
+ /* The gcc alloca implementation leaves garbage in the upper 32 bits of sp */
+ usp = (compat_uint_t)usp;
+ }
+#endif
/*FIXME: frame_size parameter is unused, remove it. */
frame = get_sigframe(&ksig->ka, usp, sizeof(*frame));
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 185/217] scsi: BusLogic: Fix missing pr_cont() use
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (183 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 184/217] parisc: fix crash with signals and alloca Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 186/217] scsi: qla2xxx: Sync queue idx with queue_pair_map idx Greg Kroah-Hartman
` (34 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Khalid Aziz, Maciej W. Rozycki,
Martin K. Petersen
From: Maciej W. Rozycki <macro@orcam.me.uk>
commit 44d01fc86d952f5a8b8b32bdb4841504d5833d95 upstream.
Update BusLogic driver's messaging system to use pr_cont() for continuation
lines, bringing messy output:
pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0: Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level
scsi0: PCI Bus: 0, Device: 19, Address:
0xE0012000,
Host Adapter SCSI ID: 7
scsi0: Parity Checking: Enabled, Extended Translation: Enabled
scsi0: Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0: Tagged Queue Depth:
Automatic
, Untagged Queue Depth: 3
scsi0: SCSI Bus Termination: Both Enabled
, SCAM: Disabled
scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi host0: BusLogic BT-958
back to order:
pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0: Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level
scsi0: PCI Bus: 0, Device: 19, Address: 0xE0012000, Host Adapter SCSI ID: 7
scsi0: Parity Checking: Enabled, Extended Translation: Enabled
scsi0: Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
scsi0: SCSI Bus Termination: Both Enabled, SCAM: Disabled
scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi host0: BusLogic BT-958
Also diagnostic output such as with the BusLogic=TraceConfiguration
parameter is affected and becomes vertical and therefore hard to read.
This has now been corrected, e.g.:
pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
blogic_cmd(86) Status = 30: 4 ==> 4: FF 05 93 00
blogic_cmd(95) Status = 28: (Modify I/O Address)
blogic_cmd(91) Status = 30: 1 ==> 1: 01
blogic_cmd(04) Status = 30: 4 ==> 4: 41 41 35 30
blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
blogic_cmd(04) Status = 30: 4 ==> 4: 41 41 35 30
blogic_cmd(0B) Status = 30: 3 ==> 3: 00 08 07
blogic_cmd(0D) Status = 30: 34 ==> 34: 03 01 07 04 00 00 00 00 00 00 00 00 00 00 00 00 FF 42 44 46 FF 00 00 00 00 00 00 00 00 00 FF 00 FF 00
blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D
blogic_cmd(84) Status = 30: 1 ==> 1: 37
blogic_cmd(8B) Status = 30: 5 ==> 5: 39 35 38 20 20
blogic_cmd(85) Status = 30: 1 ==> 1: 42
blogic_cmd(86) Status = 30: 4 ==> 4: FF 05 93 00
blogic_cmd(91) Status = 30: 64 ==> 64: 41 46 3E 20 39 35 38 20 20 00 C4 00 04 01 07 2F 07 04 35 FF FF FF FF FF FF FF FF FF FF 01 00 FE FF 08 FF FF 00 00 00 00 00 00 00 01 00 01 00 00 FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 FC
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
etc.
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2104201940430.44318@angie.orcam.me.uk
Fixes: 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines")
Cc: stable@vger.kernel.org # v4.9+
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/BusLogic.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -3605,7 +3605,7 @@ static void blogic_msg(enum blogic_msgle
if (buf[0] != '\n' || len > 1)
printk("%sscsi%d: %s", blogic_msglevelmap[msglevel], adapter->host_no, buf);
} else
- printk("%s", buf);
+ pr_cont("%s", buf);
} else {
if (begin) {
if (adapter != NULL && adapter->adapter_initd)
@@ -3613,7 +3613,7 @@ static void blogic_msg(enum blogic_msgle
else
printk("%s%s", blogic_msglevelmap[msglevel], buf);
} else
- printk("%s", buf);
+ pr_cont("%s", buf);
}
begin = (buf[len - 1] == '\n');
}
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 186/217] scsi: qla2xxx: Sync queue idx with queue_pair_map idx
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (184 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 185/217] scsi: BusLogic: Fix missing pr_cont() use Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 187/217] cpufreq: powernv: Fix init_chip_info initialization in numa=off Greg Kroah-Hartman
` (33 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Himanshu Madhani, Saurav Kashyap,
Nilesh Javali, Martin K. Petersen
From: Saurav Kashyap <skashyap@marvell.com>
commit c8fadf019964d0eb1da410ba8b629494d3339db9 upstream.
The first invocation of function find_first_zero_bit will return 0 and
queue_id gets set to 0.
An index of queue_pair_map also gets set to 0.
qpair_id = find_first_zero_bit(ha->qpair_qid_map, ha->max_qpairs);
set_bit(qpair_id, ha->qpair_qid_map);
ha->queue_pair_map[qpair_id] = qpair;
In the alloc_queue callback driver checks the map, if queue is already
allocated:
ha->queue_pair_map[qidx]
This works fine as long as max_qpairs is greater than nvme_max_hw_queues(8)
since the size of the queue_pair_map is equal to max_qpair. In case nr_cpus
is less than 8, max_qpairs is less than 8. This creates wrong value
returned as qpair.
[ 1572.353669] qla2xxx [0000:24:00.3]-2121:6: Returning existing qpair of 4e00000000000000 for idx=2
[ 1572.354458] general protection fault: 0000 [#1] SMP PTI
[ 1572.354461] CPU: 1 PID: 44 Comm: kworker/1:1H Kdump: loaded Tainted: G IOE --------- - - 4.18.0-304.el8.x86_64 #1
[ 1572.354462] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 03/01/2013
[ 1572.354467] Workqueue: kblockd blk_mq_run_work_fn
[ 1572.354485] RIP: 0010:qla_nvme_post_cmd+0x92/0x760 [qla2xxx]
[ 1572.354486] Code: 84 24 5c 01 00 00 00 00 b8 0a 74 1e 66 83 79 48 00 0f 85 a8 03 00 00 48 8b 44 24 08 48 89 ee 4c 89 e7 8b 50 24 e8 5e 8e 00 00 <f0> 41 ff 47 04 0f ae f0 41 f6 47 24 04 74 19 f0 41 ff 4f 04 b8 f0
[ 1572.354487] RSP: 0018:ffff9c81c645fc90 EFLAGS: 00010246
[ 1572.354489] RAX: 0000000000000001 RBX: ffff8ea3e5070138 RCX: 0000000000000001
[ 1572.354490] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8ea4c866b800
[ 1572.354491] RBP: ffff8ea4c866b800 R08: 0000000000005010 R09: ffff8ea4c866b800
[ 1572.354492] R10: 0000000000000001 R11: 000000069d1ca3ff R12: ffff8ea4bc460000
[ 1572.354493] R13: ffff8ea3e50702b0 R14: ffff8ea4c4c16a58 R15: 4e00000000000000
[ 1572.354494] FS: 0000000000000000(0000) GS:ffff8ea4dfd00000(0000) knlGS:0000000000000000
[ 1572.354495] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1572.354496] CR2: 000055884504fa58 CR3: 00000005a1410001 CR4: 00000000000606e0
[ 1572.354497] Call Trace:
[ 1572.354503] ? check_preempt_curr+0x62/0x90
[ 1572.354506] ? dma_direct_map_sg+0x72/0x1f0
[ 1572.354509] ? nvme_fc_start_fcp_op.part.32+0x175/0x460 [nvme_fc]
[ 1572.354511] ? blk_mq_dispatch_rq_list+0x11c/0x730
[ 1572.354515] ? __switch_to_asm+0x35/0x70
[ 1572.354516] ? __switch_to_asm+0x41/0x70
[ 1572.354518] ? __switch_to_asm+0x35/0x70
[ 1572.354519] ? __switch_to_asm+0x41/0x70
[ 1572.354521] ? __switch_to_asm+0x35/0x70
[ 1572.354522] ? __switch_to_asm+0x41/0x70
[ 1572.354523] ? __switch_to_asm+0x35/0x70
[ 1572.354525] ? entry_SYSCALL_64_after_hwframe+0xb9/0xca
[ 1572.354527] ? __switch_to_asm+0x41/0x70
[ 1572.354529] ? __blk_mq_sched_dispatch_requests+0xc6/0x170
[ 1572.354531] ? blk_mq_sched_dispatch_requests+0x30/0x60
[ 1572.354532] ? __blk_mq_run_hw_queue+0x51/0xd0
[ 1572.354535] ? process_one_work+0x1a7/0x360
[ 1572.354537] ? create_worker+0x1a0/0x1a0
[ 1572.354538] ? worker_thread+0x30/0x390
[ 1572.354540] ? create_worker+0x1a0/0x1a0
[ 1572.354541] ? kthread+0x116/0x130
[ 1572.354543] ? kthread_flush_work_fn+0x10/0x10
[ 1572.354545] ? ret_from_fork+0x35/0x40
Fix is to use index 0 for admin and first IO queue.
Link: https://lore.kernel.org/r/20210810043720.1137-14-njavali@marvell.com
Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/qla2xxx/qla_nvme.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -88,8 +88,9 @@ static int qla_nvme_alloc_queue(struct n
struct qla_hw_data *ha;
struct qla_qpair *qpair;
- if (!qidx)
- qidx++;
+ /* Map admin queue and 1st IO queue to index 0 */
+ if (qidx)
+ qidx--;
vha = (struct scsi_qla_host *)lport->private;
ha = vha->hw;
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 187/217] cpufreq: powernv: Fix init_chip_info initialization in numa=off
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (185 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 186/217] scsi: qla2xxx: Sync queue idx with queue_pair_map idx Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 188/217] mm/hugetlb: initialize hugetlb_usage in mm_init Greg Kroah-Hartman
` (32 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Shirisha Ganta, Pratik R. Sampat,
Gautham R. Shenoy, Michael Ellerman
From: Pratik R. Sampat <psampat@linux.ibm.com>
commit f34ee9cb2c5ac5af426fee6fa4591a34d187e696 upstream.
In the numa=off kernel command-line configuration init_chip_info() loops
around the number of chips and attempts to copy the cpumask of that node
which is NULL for all iterations after the first chip.
Hence, store the cpu mask for each chip instead of derving cpumask from
node while populating the "chips" struct array and copy that to the
chips[i].mask
Fixes: 053819e0bf84 ("cpufreq: powernv: Handle throttling due to Pmax capping at chip level")
Cc: stable@vger.kernel.org # v4.3+
Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com>
Signed-off-by: Pratik R. Sampat <psampat@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
[mpe: Rename goto label to out_free_chip_cpu_mask]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210728120500.87549-2-psampat@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/cpufreq/powernv-cpufreq.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
--- a/drivers/cpufreq/powernv-cpufreq.c
+++ b/drivers/cpufreq/powernv-cpufreq.c
@@ -44,6 +44,7 @@
#define MAX_PSTATE_SHIFT 32
#define LPSTATE_SHIFT 48
#define GPSTATE_SHIFT 56
+#define MAX_NR_CHIPS 32
#define MAX_RAMP_DOWN_TIME 5120
/*
@@ -1011,12 +1012,20 @@ static int init_chip_info(void)
unsigned int *chip;
unsigned int cpu, i;
unsigned int prev_chip_id = UINT_MAX;
+ cpumask_t *chip_cpu_mask;
int ret = 0;
chip = kcalloc(num_possible_cpus(), sizeof(*chip), GFP_KERNEL);
if (!chip)
return -ENOMEM;
+ /* Allocate a chip cpu mask large enough to fit mask for all chips */
+ chip_cpu_mask = kcalloc(MAX_NR_CHIPS, sizeof(cpumask_t), GFP_KERNEL);
+ if (!chip_cpu_mask) {
+ ret = -ENOMEM;
+ goto free_and_return;
+ }
+
for_each_possible_cpu(cpu) {
unsigned int id = cpu_to_chip_id(cpu);
@@ -1024,22 +1033,25 @@ static int init_chip_info(void)
prev_chip_id = id;
chip[nr_chips++] = id;
}
+ cpumask_set_cpu(cpu, &chip_cpu_mask[nr_chips-1]);
}
chips = kcalloc(nr_chips, sizeof(struct chip), GFP_KERNEL);
if (!chips) {
ret = -ENOMEM;
- goto free_and_return;
+ goto out_free_chip_cpu_mask;
}
for (i = 0; i < nr_chips; i++) {
chips[i].id = chip[i];
- cpumask_copy(&chips[i].mask, cpumask_of_node(chip[i]));
+ cpumask_copy(&chips[i].mask, &chip_cpu_mask[i]);
INIT_WORK(&chips[i].throttle, powernv_cpufreq_work_fn);
for_each_cpu(cpu, &chips[i].mask)
per_cpu(chip_info, cpu) = &chips[i];
}
+out_free_chip_cpu_mask:
+ kfree(chip_cpu_mask);
free_and_return:
kfree(chip);
return ret;
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 188/217] mm/hugetlb: initialize hugetlb_usage in mm_init
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (186 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 187/217] cpufreq: powernv: Fix init_chip_info initialization in numa=off Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 189/217] memcg: enable accounting for pids in nested pid namespaces Greg Kroah-Hartman
` (31 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Liu Zixian, Naoya Horiguchi,
Mike Kravetz, Andrew Morton, Linus Torvalds
From: Liu Zixian <liuzixian4@huawei.com>
commit 13db8c50477d83ad3e3b9b0ae247e5cd833a7ae4 upstream.
After fork, the child process will get incorrect (2x) hugetlb_usage. If
a process uses 5 2MB hugetlb pages in an anonymous mapping,
HugetlbPages: 10240 kB
and then forks, the child will show,
HugetlbPages: 20480 kB
The reason for double the amount is because hugetlb_usage will be copied
from the parent and then increased when we copy page tables from parent
to child. Child will have 2x actual usage.
Fix this by adding hugetlb_count_init in mm_init.
Link: https://lkml.kernel.org/r/20210826071742.877-1-liuzixian4@huawei.com
Fixes: 5d317b2b6536 ("mm: hugetlb: proc: add HugetlbPages field to /proc/PID/status")
Signed-off-by: Liu Zixian <liuzixian4@huawei.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/hugetlb.h | 9 +++++++++
kernel/fork.c | 1 +
2 files changed, 10 insertions(+)
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -503,6 +503,11 @@ static inline spinlock_t *huge_pte_lockp
void hugetlb_report_usage(struct seq_file *m, struct mm_struct *mm);
+static inline void hugetlb_count_init(struct mm_struct *mm)
+{
+ atomic_long_set(&mm->hugetlb_usage, 0);
+}
+
static inline void hugetlb_count_add(long l, struct mm_struct *mm)
{
atomic_long_add(l, &mm->hugetlb_usage);
@@ -583,6 +588,10 @@ static inline spinlock_t *huge_pte_lockp
return &mm->page_table_lock;
}
+static inline void hugetlb_count_init(struct mm_struct *mm)
+{
+}
+
static inline void hugetlb_report_usage(struct seq_file *f, struct mm_struct *m)
{
}
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -837,6 +837,7 @@ static struct mm_struct *mm_init(struct
mm->pmd_huge_pte = NULL;
#endif
mm_init_uprobes_state(mm);
+ hugetlb_count_init(mm);
if (current->mm) {
mm->flags = current->mm->flags & MMF_INIT_MASK;
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 189/217] memcg: enable accounting for pids in nested pid namespaces
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (187 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 188/217] mm/hugetlb: initialize hugetlb_usage in mm_init Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 190/217] platform/chrome: cros_ec_proto: Send command again when timeout occurs Greg Kroah-Hartman
` (30 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vasily Averin, Michal Koutný,
Shakeel Butt, Christian Brauner, Roman Gushchin, Michal Hocko,
Johannes Weiner, Andrew Morton, Linus Torvalds
From: Vasily Averin <vvs@virtuozzo.com>
commit fab827dbee8c2e06ca4ba000fa6c48bcf9054aba upstream.
Commit 5d097056c9a0 ("kmemcg: account certain kmem allocations to memcg")
enabled memcg accounting for pids allocated from init_pid_ns.pid_cachep,
but forgot to adjust the setting for nested pid namespaces. As a result,
pid memory is not accounted exactly where it is really needed, inside
memcg-limited containers with their own pid namespaces.
Pid was one the first kernel objects enabled for memcg accounting.
init_pid_ns.pid_cachep marked by SLAB_ACCOUNT and we can expect that any
new pids in the system are memcg-accounted.
Though recently I've noticed that it is wrong. nested pid namespaces
creates own slab caches for pid objects, nested pids have increased size
because contain id both for all parent and for own pid namespaces. The
problem is that these slab caches are _NOT_ marked by SLAB_ACCOUNT, as a
result any pids allocated in nested pid namespaces are not
memcg-accounted.
Pid struct in nested pid namespace consumes up to 500 bytes memory, 100000
such objects gives us up to ~50Mb unaccounted memory, this allow container
to exceed assigned memcg limits.
Link: https://lkml.kernel.org/r/8b6de616-fd1a-02c6-cbdb-976ecdcfa604@virtuozzo.com
Fixes: 5d097056c9a0 ("kmemcg: account certain kmem allocations to memcg")
Cc: stable@vger.kernel.org
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/pid_namespace.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -55,7 +55,7 @@ static struct kmem_cache *create_pid_cac
snprintf(pcache->name, sizeof(pcache->name), "pid_%d", nr_ids);
cachep = kmem_cache_create(pcache->name,
sizeof(struct pid) + (nr_ids - 1) * sizeof(struct upid),
- 0, SLAB_HWCACHE_ALIGN, NULL);
+ 0, SLAB_HWCACHE_ALIGN | SLAB_ACCOUNT, NULL);
if (cachep == NULL)
goto err_cachep;
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 190/217] platform/chrome: cros_ec_proto: Send command again when timeout occurs
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (188 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 189/217] memcg: enable accounting for pids in nested pid namespaces Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 191/217] xen: reset legacy rtc flag for PV domU Greg Kroah-Hartman
` (29 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Patryk Duda, Benson Leung
From: Patryk Duda <pdk@semihalf.com>
commit 3abc16af57c9939724df92fcbda296b25cc95168 upstream.
Sometimes kernel is trying to probe Fingerprint MCU (FPMCU) when it
hasn't initialized SPI yet. This can happen because FPMCU is restarted
during system boot and kernel can send message in short window
eg. between sysjump to RW and SPI initialization.
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Link: https://lore.kernel.org/r/20210518140758.29318-1-pdk@semihalf.com
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/platform/chrome/cros_ec_proto.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/platform/chrome/cros_ec_proto.c
+++ b/drivers/platform/chrome/cros_ec_proto.c
@@ -217,6 +217,15 @@ static int cros_ec_host_command_proto_qu
msg->insize = sizeof(struct ec_response_get_protocol_info);
ret = send_command(ec_dev, msg);
+ /*
+ * Send command once again when timeout occurred.
+ * Fingerprint MCU (FPMCU) is restarted during system boot which
+ * introduces small window in which FPMCU won't respond for any
+ * messages sent by kernel. There is no need to wait before next
+ * attempt because we waited at least EC_MSG_DEADLINE_MS.
+ */
+ if (ret == -ETIMEDOUT)
+ ret = send_command(ec_dev, msg);
if (ret < 0) {
dev_dbg(ec_dev->dev,
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 191/217] xen: reset legacy rtc flag for PV domU
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (189 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 190/217] platform/chrome: cros_ec_proto: Send command again when timeout occurs Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 192/217] bnx2x: Fix enabling network interfaces without VFs Greg Kroah-Hartman
` (28 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Juergen Gross, Boris Ostrovsky
From: Juergen Gross <jgross@suse.com>
commit f68aa100d815b5b4467fd1c3abbe3b99d65fd028 upstream.
A Xen PV guest doesn't have a legacy RTC device, so reset the legacy
RTC flag. Otherwise the following WARN splat will occur at boot:
[ 1.333404] WARNING: CPU: 1 PID: 1 at /home/gross/linux/head/drivers/rtc/rtc-mc146818-lib.c:25 mc146818_get_time+0x1be/0x210
[ 1.333404] Modules linked in:
[ 1.333404] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.14.0-rc7-default+ #282
[ 1.333404] RIP: e030:mc146818_get_time+0x1be/0x210
[ 1.333404] Code: c0 64 01 c5 83 fd 45 89 6b 14 7f 06 83 c5 64 89 6b 14 41 83 ec 01 b8 02 00 00 00 44 89 63 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 <0f> 0b 48 c7 c7 30 0e ef 82 4c 89 e6 e8 71 2a 24 00 48 c7 c0 ff ff
[ 1.333404] RSP: e02b:ffffc90040093df8 EFLAGS: 00010002
[ 1.333404] RAX: 00000000000000ff RBX: ffffc90040093e34 RCX: 0000000000000000
[ 1.333404] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000000000000000d
[ 1.333404] RBP: ffffffff82ef0e30 R08: ffff888005013e60 R09: 0000000000000000
[ 1.333404] R10: ffffffff82373e9b R11: 0000000000033080 R12: 0000000000000200
[ 1.333404] R13: 0000000000000000 R14: 0000000000000002 R15: ffffffff82cdc6d4
[ 1.333404] FS: 0000000000000000(0000) GS:ffff88807d440000(0000) knlGS:0000000000000000
[ 1.333404] CS: 10000e030 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.333404] CR2: 0000000000000000 CR3: 000000000260a000 CR4: 0000000000050660
[ 1.333404] Call Trace:
[ 1.333404] ? wakeup_sources_sysfs_init+0x30/0x30
[ 1.333404] ? rdinit_setup+0x2b/0x2b
[ 1.333404] early_resume_init+0x23/0xa4
[ 1.333404] ? cn_proc_init+0x36/0x36
[ 1.333404] do_one_initcall+0x3e/0x200
[ 1.333404] kernel_init_freeable+0x232/0x28e
[ 1.333404] ? rest_init+0xd0/0xd0
[ 1.333404] kernel_init+0x16/0x120
[ 1.333404] ret_from_fork+0x1f/0x30
Cc: <stable@vger.kernel.org>
Fixes: 8d152e7a5c7537 ("x86/rtc: Replace paravirt rtc check with platform legacy quirk")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210903084937.19392-3-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/xen/enlighten_pv.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/arch/x86/xen/enlighten_pv.c
+++ b/arch/x86/xen/enlighten_pv.c
@@ -1214,6 +1214,11 @@ static void __init xen_dom0_set_legacy_f
x86_platform.legacy.rtc = 1;
}
+static void __init xen_domu_set_legacy_features(void)
+{
+ x86_platform.legacy.rtc = 0;
+}
+
/* First C function to be called on Xen boot */
asmlinkage __visible void __init xen_start_kernel(void)
{
@@ -1375,6 +1380,8 @@ asmlinkage __visible void __init xen_sta
add_preferred_console("hvc", 0, NULL);
if (pci_xen)
x86_init.pci.arch_init = pci_xen_init;
+ x86_platform.set_legacy_features =
+ xen_domu_set_legacy_features;
} else {
const struct dom0_vga_console_info *info =
(void *)((char *)xen_start_info +
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 192/217] bnx2x: Fix enabling network interfaces without VFs
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (190 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 191/217] xen: reset legacy rtc flag for PV domU Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 193/217] PM: base: power: dont try to use non-existing RTC for storing data Greg Kroah-Hartman
` (27 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Adrian Bunk, YunQiang Su, Shai Malin,
Jakub Kicinski
From: Adrian Bunk <bunk@kernel.org>
commit 52ce14c134a003fee03d8fc57442c05a55b53715 upstream.
This function is called to enable SR-IOV when available,
not enabling interfaces without VFs was a regression.
Fixes: 65161c35554f ("bnx2x: Fix missing error code in bnx2x_iov_init_one()")
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Reported-by: YunQiang Su <wzssyqa@gmail.com>
Tested-by: YunQiang Su <wzssyqa@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Shai Malin <smalin@marvell.com>
Link: https://lore.kernel.org/r/20210912190523.27991-1-bunk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -1243,7 +1243,7 @@ int bnx2x_iov_init_one(struct bnx2x *bp,
/* SR-IOV capability was enabled but there are no VFs*/
if (iov->total == 0) {
- err = -EINVAL;
+ err = 0;
goto failed;
}
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 193/217] PM: base: power: dont try to use non-existing RTC for storing data
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (191 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 192/217] bnx2x: Fix enabling network interfaces without VFs Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 194/217] x86/mm: Fix kern_addr_valid() to cope with existing but not present entries Greg Kroah-Hartman
` (26 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Juergen Gross, Rafael J. Wysocki
From: Juergen Gross <jgross@suse.com>
commit 0560204b360a332c321124dbc5cdfd3364533a74 upstream.
If there is no legacy RTC device, don't try to use it for storing trace
data across suspend/resume.
Cc: <stable@vger.kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20210903084937.19392-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/base/power/trace.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/base/power/trace.c
+++ b/drivers/base/power/trace.c
@@ -11,6 +11,7 @@
#include <linux/export.h>
#include <linux/rtc.h>
#include <linux/suspend.h>
+#include <linux/init.h>
#include <linux/mc146818rtc.h>
@@ -165,6 +166,9 @@ void generate_pm_trace(const void *trace
const char *file = *(const char **)(tracedata + 2);
unsigned int user_hash_value, file_hash_value;
+ if (!x86_platform.legacy.rtc)
+ return;
+
user_hash_value = user % USERHASH;
file_hash_value = hash_string(lineno, file, FILEHASH);
set_magic_time(user_hash_value, file_hash_value, dev_hash_value);
@@ -267,6 +271,9 @@ static struct notifier_block pm_trace_nb
static int early_resume_init(void)
{
+ if (!x86_platform.legacy.rtc)
+ return 0;
+
hash_value_early_read = read_magic_time();
register_pm_notifier(&pm_trace_nb);
return 0;
@@ -277,6 +284,9 @@ static int late_resume_init(void)
unsigned int val = hash_value_early_read;
unsigned int user, file, dev;
+ if (!x86_platform.legacy.rtc)
+ return 0;
+
user = val % USERHASH;
val = val / USERHASH;
file = val % FILEHASH;
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 194/217] x86/mm: Fix kern_addr_valid() to cope with existing but not present entries
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (192 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 193/217] PM: base: power: dont try to use non-existing RTC for storing data Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 195/217] net-caif: avoid user-triggerable WARN_ON(1) Greg Kroah-Hartman
` (25 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jiri Olsa, Mike Rapoport,
Borislav Petkov, David Hildenbrand, Dave Hansen
From: Mike Rapoport <rppt@linux.ibm.com>
commit 34b1999da935a33be6239226bfa6cd4f704c5c88 upstream.
Jiri Olsa reported a fault when running:
# cat /proc/kallsyms | grep ksys_read
ffffffff8136d580 T ksys_read
# objdump -d --start-address=0xffffffff8136d580 --stop-address=0xffffffff8136d590 /proc/kcore
/proc/kcore: file format elf64-x86-64
Segmentation fault
general protection fault, probably for non-canonical address 0xf887ffcbff000: 0000 [#1] SMP PTI
CPU: 12 PID: 1079 Comm: objdump Not tainted 5.14.0-rc5qemu+ #508
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-4.fc34 04/01/2014
RIP: 0010:kern_addr_valid
Call Trace:
read_kcore
? rcu_read_lock_sched_held
? rcu_read_lock_sched_held
? rcu_read_lock_sched_held
? trace_hardirqs_on
? rcu_read_lock_sched_held
? lock_acquire
? lock_acquire
? rcu_read_lock_sched_held
? lock_acquire
? rcu_read_lock_sched_held
? rcu_read_lock_sched_held
? rcu_read_lock_sched_held
? lock_release
? _raw_spin_unlock
? __handle_mm_fault
? rcu_read_lock_sched_held
? lock_acquire
? rcu_read_lock_sched_held
? lock_release
proc_reg_read
? vfs_read
vfs_read
ksys_read
do_syscall_64
entry_SYSCALL_64_after_hwframe
The fault happens because kern_addr_valid() dereferences existent but not
present PMD in the high kernel mappings.
Such PMDs are created when free_kernel_image_pages() frees regions larger
than 2Mb. In this case, a part of the freed memory is mapped with PMDs and
the set_memory_np_noalias() -> ... -> __change_page_attr() sequence will
mark the PMD as not present rather than wipe it completely.
Have kern_addr_valid() check whether higher level page table entries are
present before trying to dereference them to fix this issue and to avoid
similar issues in the future.
Stable backporting note:
------------------------
Note that the stable marking is for all active stable branches because
there could be cases where pagetable entries exist but are not valid -
see 9a14aefc1d28 ("x86: cpa, fix lookup_address"), for example. So make
sure to be on the safe side here and use pXY_present() accessors rather
than pXY_none() which could #GP when accessing pages in the direct map.
Also see:
c40a56a7818c ("x86/mm/init: Remove freed kernel image areas from alias mapping")
for more info.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: <stable@vger.kernel.org> # 4.4+
Link: https://lkml.kernel.org/r/20210819132717.19358-1-rppt@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/mm/init_64.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -1282,18 +1282,18 @@ int kern_addr_valid(unsigned long addr)
return 0;
p4d = p4d_offset(pgd, addr);
- if (p4d_none(*p4d))
+ if (!p4d_present(*p4d))
return 0;
pud = pud_offset(p4d, addr);
- if (pud_none(*pud))
+ if (!pud_present(*pud))
return 0;
if (pud_large(*pud))
return pfn_valid(pud_pfn(*pud));
pmd = pmd_offset(pud, addr);
- if (pmd_none(*pmd))
+ if (!pmd_present(*pmd))
return 0;
if (pmd_large(*pmd))
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 195/217] net-caif: avoid user-triggerable WARN_ON(1)
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (193 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 194/217] x86/mm: Fix kern_addr_valid() to cope with existing but not present entries Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 196/217] ptp: dp83640: dont define PAGE0 Greg Kroah-Hartman
` (24 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Eric Dumazet, David S. Miller
From: Eric Dumazet <edumazet@google.com>
commit 550ac9c1aaaaf51fd42e20d461f0b1cdbd55b3d2 upstream.
syszbot triggers this warning, which looks something
we can easily prevent.
If we initialize priv->list_field in chnl_net_init(),
then always use list_del_init(), we can remove robust_list_del()
completely.
WARNING: CPU: 0 PID: 3233 at net/caif/chnl_net.c:67 robust_list_del net/caif/chnl_net.c:67 [inline]
WARNING: CPU: 0 PID: 3233 at net/caif/chnl_net.c:67 chnl_net_uninit+0xc9/0x2e0 net/caif/chnl_net.c:375
Modules linked in:
CPU: 0 PID: 3233 Comm: syz-executor.3 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:robust_list_del net/caif/chnl_net.c:67 [inline]
RIP: 0010:chnl_net_uninit+0xc9/0x2e0 net/caif/chnl_net.c:375
Code: 89 eb e8 3a a3 ba f8 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 bf 01 00 00 48 81 fb 00 14 4e 8d 48 8b 2b 75 d0 e8 17 a3 ba f8 <0f> 0b 5b 5d 41 5c 41 5d e9 0a a3 ba f8 4c 89 e3 e8 02 a3 ba f8 4c
RSP: 0018:ffffc90009067248 EFLAGS: 00010202
RAX: 0000000000008780 RBX: ffffffff8d4e1400 RCX: ffffc9000fd34000
RDX: 0000000000040000 RSI: ffffffff88bb6e49 RDI: 0000000000000003
RBP: ffff88802cd9ee08 R08: 0000000000000000 R09: ffffffff8d0e6647
R10: ffffffff88bb6dc2 R11: 0000000000000000 R12: ffff88803791ae08
R13: dffffc0000000000 R14: 00000000e600ffce R15: ffff888073ed3480
FS: 00007fed10fa0700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2c322000 CR3: 00000000164a6000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
register_netdevice+0xadf/0x1500 net/core/dev.c:10347
ipcaif_newlink+0x4c/0x260 net/caif/chnl_net.c:468
__rtnl_newlink+0x106d/0x1750 net/core/rtnetlink.c:3458
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3506
rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5572
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:724
__sys_sendto+0x21c/0x320 net/socket.c:2036
__do_sys_sendto net/socket.c:2048 [inline]
__se_sys_sendto net/socket.c:2044 [inline]
__x64_sys_sendto+0xdd/0x1b0 net/socket.c:2044
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: cc36a070b590 ("net-caif: add CAIF netdevice")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/caif/chnl_net.c | 19 +++----------------
1 file changed, 3 insertions(+), 16 deletions(-)
--- a/net/caif/chnl_net.c
+++ b/net/caif/chnl_net.c
@@ -54,20 +54,6 @@ struct chnl_net {
enum caif_states state;
};
-static void robust_list_del(struct list_head *delete_node)
-{
- struct list_head *list_node;
- struct list_head *n;
- ASSERT_RTNL();
- list_for_each_safe(list_node, n, &chnl_net_list) {
- if (list_node == delete_node) {
- list_del(list_node);
- return;
- }
- }
- WARN_ON(1);
-}
-
static int chnl_recv_cb(struct cflayer *layr, struct cfpkt *pkt)
{
struct sk_buff *skb;
@@ -369,6 +355,7 @@ static int chnl_net_init(struct net_devi
ASSERT_RTNL();
priv = netdev_priv(dev);
strncpy(priv->name, dev->name, sizeof(priv->name));
+ INIT_LIST_HEAD(&priv->list_field);
return 0;
}
@@ -377,7 +364,7 @@ static void chnl_net_uninit(struct net_d
struct chnl_net *priv;
ASSERT_RTNL();
priv = netdev_priv(dev);
- robust_list_del(&priv->list_field);
+ list_del_init(&priv->list_field);
}
static const struct net_device_ops netdev_ops = {
@@ -542,7 +529,7 @@ static void __exit chnl_exit_module(void
rtnl_lock();
list_for_each_safe(list_node, _tmp, &chnl_net_list) {
dev = list_entry(list_node, struct chnl_net, list_field);
- list_del(list_node);
+ list_del_init(list_node);
delete_device(dev);
}
rtnl_unlock();
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 196/217] ptp: dp83640: dont define PAGE0
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (194 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 195/217] net-caif: avoid user-triggerable WARN_ON(1) Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 197/217] dccp: dont duplicate ccid when cloning dccp sock Greg Kroah-Hartman
` (23 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Randy Dunlap, Geert Uytterhoeven,
Richard Cochran, John Stultz, Heiner Kallweit, Russell King,
Andrew Lunn, Jakub Kicinski
From: Randy Dunlap <rdunlap@infradead.org>
commit 7366c23ff492ad260776a3ee1aaabba9fc773a8b upstream.
Building dp83640.c on arch/parisc/ produces a build warning for
PAGE0 being redefined. Since the macro is not used in the dp83640
driver, just make it a comment for documentation purposes.
In file included from ../drivers/net/phy/dp83640.c:23:
../drivers/net/phy/dp83640_reg.h:8: warning: "PAGE0" redefined
8 | #define PAGE0 0x0000
from ../drivers/net/phy/dp83640.c:11:
../arch/parisc/include/asm/page.h:187: note: this is the location of the previous definition
187 | #define PAGE0 ((struct zeropage *)__PAGE_OFFSET)
Fixes: cb646e2b02b2 ("ptp: Added a clock driver for the National Semiconductor PHYTER.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Cochran <richard.cochran@omicron.at>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210913220605.19682-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/phy/dp83640_reg.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/phy/dp83640_reg.h
+++ b/drivers/net/phy/dp83640_reg.h
@@ -5,7 +5,7 @@
#ifndef HAVE_DP83640_REGISTERS
#define HAVE_DP83640_REGISTERS
-#define PAGE0 0x0000
+/* #define PAGE0 0x0000 */
#define PHYCR2 0x001c /* PHY Control Register 2 */
#define PAGE4 0x0004
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 197/217] dccp: dont duplicate ccid when cloning dccp sock
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (195 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 196/217] ptp: dp83640: dont define PAGE0 Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 198/217] net/l2tp: Fix reference count leak in l2tp_udp_recv_core Greg Kroah-Hartman
` (22 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Zhenpeng Lin, David S. Miller
From: Lin, Zhenpeng <zplin@psu.edu>
commit d9ea761fdd197351890418acd462c51f241014a7 upstream.
Commit 2677d2067731 ("dccp: don't free ccid2_hc_tx_sock ...") fixed
a UAF but reintroduced CVE-2017-6074.
When the sock is cloned, two dccps_hc_tx_ccid will reference to the
same ccid. So one can free the ccid object twice from two socks after
cloning.
This issue was found by "Hadar Manor" as well and assigned with
CVE-2020-16119, which was fixed in Ubuntu's kernel. So here I port
the patch from Ubuntu to fix it.
The patch prevents cloned socks from referencing the same ccid.
Fixes: 2677d2067731410 ("dccp: don't free ccid2_hc_tx_sock ...")
Signed-off-by: Zhenpeng Lin <zplin@psu.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/dccp/minisocks.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/dccp/minisocks.c
+++ b/net/dccp/minisocks.c
@@ -98,6 +98,8 @@ struct sock *dccp_create_openreq_child(c
newdp->dccps_role = DCCP_ROLE_SERVER;
newdp->dccps_hc_rx_ackvec = NULL;
newdp->dccps_service_list = NULL;
+ newdp->dccps_hc_rx_ccid = NULL;
+ newdp->dccps_hc_tx_ccid = NULL;
newdp->dccps_service = dreq->dreq_service;
newdp->dccps_timestamp_echo = dreq->dreq_timestamp_echo;
newdp->dccps_timestamp_time = dreq->dreq_timestamp_time;
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 198/217] net/l2tp: Fix reference count leak in l2tp_udp_recv_core
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (196 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 197/217] dccp: dont duplicate ccid when cloning dccp sock Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 199/217] r6040: Restore MDIO clock frequency after MAC reset Greg Kroah-Hartman
` (21 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Xiyu Yang, Xin Xiong, Xin Tan,
David S. Miller
From: Xiyu Yang <xiyuyang19@fudan.edu.cn>
commit 9b6ff7eb666415e1558f1ba8a742f5db6a9954de upstream.
The reference count leak issue may take place in an error handling
path. If both conditions of tunnel->version == L2TP_HDR_VER_3 and the
return value of l2tp_v3_ensure_opt_in_linear is nonzero, the function
would directly jump to label invalid, without decrementing the reference
count of the l2tp_session object session increased earlier by
l2tp_tunnel_get_session(). This may result in refcount leaks.
Fix this issue by decrease the reference count before jumping to the
label invalid.
Fixes: 4522a70db7aa ("l2tp: fix reading optional fields of L2TPv3")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/l2tp/l2tp_core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -994,8 +994,10 @@ static int l2tp_udp_recv_core(struct l2t
}
if (tunnel->version == L2TP_HDR_VER_3 &&
- l2tp_v3_ensure_opt_in_linear(session, skb, &ptr, &optr))
+ l2tp_v3_ensure_opt_in_linear(session, skb, &ptr, &optr)) {
+ l2tp_session_dec_refcount(session);
goto error;
+ }
l2tp_recv_common(session, skb, ptr, optr, hdrflags, length, payload_hook);
l2tp_session_dec_refcount(session);
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 199/217] r6040: Restore MDIO clock frequency after MAC reset
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (197 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 198/217] net/l2tp: Fix reference count leak in l2tp_udp_recv_core Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 200/217] tipc: increase timeout in tipc_sk_enqueue() Greg Kroah-Hartman
` (20 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrius V, Darek Strugacz,
Florian Fainelli, David S. Miller
From: Florian Fainelli <f.fainelli@gmail.com>
commit e3f0cc1a945fcefec0c7c9d9dfd028a51daa1846 upstream.
A number of users have reported that they were not able to get the PHY
to successfully link up, especially after commit c36757eb9dee ("net:
phy: consider AN_RESTART status when reading link status") where we
stopped reading just BMSR, but we also read BMCR to determine the link
status.
Andrius at NetBSD did a wonderful job at debugging the problem
and found out that the MDIO bus clock frequency would be incorrectly set
back to its default value which would prevent the MDIO bus controller
from reading PHY registers properly. Back when we only read BMSR, if we
read all 1s, we could falsely indicate a link status, though in general
there is a cable plugged in, so this went unnoticed. After a second read
of BMCR was added, a wrong read will lead to the inability to determine
a link UP condition which is when it started to be visibly broken, even
if it was long before that.
The fix consists in restoring the value of the MD_CSR register that was
set prior to the MAC reset.
Link: http://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=53494
Fixes: 90f750a81a29 ("r6040: consolidate MAC reset to its own function")
Reported-by: Andrius V <vezhlys@gmail.com>
Reported-by: Darek Strugacz <darek.strugacz@op.pl>
Tested-by: Darek Strugacz <darek.strugacz@op.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/rdc/r6040.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/rdc/r6040.c
+++ b/drivers/net/ethernet/rdc/r6040.c
@@ -133,6 +133,8 @@
#define PHY_ST 0x8A /* PHY status register */
#define MAC_SM 0xAC /* MAC status machine */
#define MAC_SM_RST 0x0002 /* MAC status machine reset */
+#define MD_CSC 0xb6 /* MDC speed control register */
+#define MD_CSC_DEFAULT 0x0030
#define MAC_ID 0xBE /* Identifier register */
#define TX_DCNT 0x80 /* TX descriptor count */
@@ -368,8 +370,9 @@ static void r6040_reset_mac(struct r6040
{
void __iomem *ioaddr = lp->base;
int limit = MAC_DEF_TIMEOUT;
- u16 cmd;
+ u16 cmd, md_csc;
+ md_csc = ioread16(ioaddr + MD_CSC);
iowrite16(MAC_RST, ioaddr + MCR1);
while (limit--) {
cmd = ioread16(ioaddr + MCR1);
@@ -381,6 +384,10 @@ static void r6040_reset_mac(struct r6040
iowrite16(MAC_SM_RST, ioaddr + MAC_SM);
iowrite16(0, ioaddr + MAC_SM);
mdelay(5);
+
+ /* Restore MDIO clock frequency */
+ if (md_csc != MD_CSC_DEFAULT)
+ iowrite16(md_csc, ioaddr + MD_CSC);
}
static void r6040_init_mac_regs(struct net_device *dev)
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 200/217] tipc: increase timeout in tipc_sk_enqueue()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (198 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 199/217] r6040: Restore MDIO clock frequency after MAC reset Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 201/217] events: Reuse value read using READ_ONCE instead of re-reading it Greg Kroah-Hartman
` (19 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jon Maloy, Hoang Le, David S. Miller
From: Hoang Le <hoang.h.le@dektech.com.au>
commit f4bb62e64c88c93060c051195d3bbba804e56945 upstream.
In tipc_sk_enqueue() we use hardcoded 2 jiffies to extract
socket buffer from generic queue to particular socket.
The 2 jiffies is too short in case there are other high priority
tasks get CPU cycles for multiple jiffies update. As result, no
buffer could be enqueued to particular socket.
To solve this, we switch to use constant timeout 20msecs.
Then, the function will be expired between 2 jiffies (CONFIG_100HZ)
and 20 jiffies (CONFIG_1000HZ).
Fixes: c637c1035534 ("tipc: resolve race problem at unicast message reception")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/tipc/socket.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -1775,7 +1775,7 @@ static int tipc_backlog_rcv(struct sock
static void tipc_sk_enqueue(struct sk_buff_head *inputq, struct sock *sk,
u32 dport, struct sk_buff_head *xmitq)
{
- unsigned long time_limit = jiffies + 2;
+ unsigned long time_limit = jiffies + usecs_to_jiffies(20000);
struct sk_buff *skb;
unsigned int lim;
atomic_t *dcnt;
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 201/217] events: Reuse value read using READ_ONCE instead of re-reading it
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (199 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 200/217] tipc: increase timeout in tipc_sk_enqueue() Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 202/217] net/af_unix: fix a data-race in unix_dgram_poll Greg Kroah-Hartman
` (18 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Baptiste Lepers, Peter Zijlstra (Intel)
From: Baptiste Lepers <baptiste.lepers@gmail.com>
commit b89a05b21f46150ac10a962aa50109250b56b03b upstream.
In perf_event_addr_filters_apply, the task associated with
the event (event->ctx->task) is read using READ_ONCE at the beginning
of the function, checked, and then re-read from event->ctx->task,
voiding all guarantees of the checks. Reuse the value that was read by
READ_ONCE to ensure the consistency of the task struct throughout the
function.
Fixes: 375637bc52495 ("perf/core: Introduce address range filtering")
Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210906015310.12802-1-baptiste.lepers@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/events/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -8435,7 +8435,7 @@ static void perf_event_addr_filters_appl
if (!ifh->nr_file_filters)
return;
- mm = get_task_mm(event->ctx->task);
+ mm = get_task_mm(task);
if (!mm)
goto restart;
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 202/217] net/af_unix: fix a data-race in unix_dgram_poll
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (200 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 201/217] events: Reuse value read using READ_ONCE instead of re-reading it Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 203/217] tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() Greg Kroah-Hartman
` (17 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Qian Cai, Eric Dumazet, David S. Miller
From: Eric Dumazet <edumazet@google.com>
commit 04f08eb44b5011493d77b602fdec29ff0f5c6cd5 upstream.
syzbot reported another data-race in af_unix [1]
Lets change __skb_insert() to use WRITE_ONCE() when changing
skb head qlen.
Also, change unix_dgram_poll() to use lockless version
of unix_recvq_full()
It is verry possible we can switch all/most unix_recvq_full()
to the lockless version, this will be done in a future kernel version.
[1] HEAD commit: 8596e589b787732c8346f0482919e83cc9362db1
BUG: KCSAN: data-race in skb_queue_tail / unix_dgram_poll
write to 0xffff88814eeb24e0 of 4 bytes by task 25815 on cpu 0:
__skb_insert include/linux/skbuff.h:1938 [inline]
__skb_queue_before include/linux/skbuff.h:2043 [inline]
__skb_queue_tail include/linux/skbuff.h:2076 [inline]
skb_queue_tail+0x80/0xa0 net/core/skbuff.c:3264
unix_dgram_sendmsg+0xff2/0x1600 net/unix/af_unix.c:1850
sock_sendmsg_nosec net/socket.c:703 [inline]
sock_sendmsg net/socket.c:723 [inline]
____sys_sendmsg+0x360/0x4d0 net/socket.c:2392
___sys_sendmsg net/socket.c:2446 [inline]
__sys_sendmmsg+0x315/0x4b0 net/socket.c:2532
__do_sys_sendmmsg net/socket.c:2561 [inline]
__se_sys_sendmmsg net/socket.c:2558 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2558
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff88814eeb24e0 of 4 bytes by task 25834 on cpu 1:
skb_queue_len include/linux/skbuff.h:1869 [inline]
unix_recvq_full net/unix/af_unix.c:194 [inline]
unix_dgram_poll+0x2bc/0x3e0 net/unix/af_unix.c:2777
sock_poll+0x23e/0x260 net/socket.c:1288
vfs_poll include/linux/poll.h:90 [inline]
ep_item_poll fs/eventpoll.c:846 [inline]
ep_send_events fs/eventpoll.c:1683 [inline]
ep_poll fs/eventpoll.c:1798 [inline]
do_epoll_wait+0x6ad/0xf00 fs/eventpoll.c:2226
__do_sys_epoll_wait fs/eventpoll.c:2238 [inline]
__se_sys_epoll_wait fs/eventpoll.c:2233 [inline]
__x64_sys_epoll_wait+0xf6/0x120 fs/eventpoll.c:2233
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x0000001b -> 0x00000001
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 25834 Comm: syz-executor.1 Tainted: G W 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 86b18aaa2b5b ("skbuff: fix a data race in skb_queue_len()")
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/skbuff.h | 2 +-
net/unix/af_unix.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1758,7 +1758,7 @@ static inline void __skb_insert(struct s
WRITE_ONCE(newsk->prev, prev);
WRITE_ONCE(next->prev, newsk);
WRITE_ONCE(prev->next, newsk);
- list->qlen++;
+ WRITE_ONCE(list->qlen, list->qlen + 1);
}
static inline void __skb_queue_splice(const struct sk_buff_head *list,
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -2742,7 +2742,7 @@ static unsigned int unix_dgram_poll(stru
other = unix_peer(sk);
if (other && unix_peer(other) != sk &&
- unix_recvq_full(other) &&
+ unix_recvq_full_lockless(other) &&
unix_dgram_peer_wake_me(sk, other))
writable = 0;
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 203/217] tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (201 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 202/217] net/af_unix: fix a data-race in unix_dgram_poll Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 204/217] ibmvnic: check failover_pending in login response Greg Kroah-Hartman
` (16 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, zhenggy, Eric Dumazet, Yuchung Cheng,
Neal Cardwell, David S. Miller
From: zhenggy <zhenggy@chinatelecom.cn>
commit 4f884f3962767877d7aabbc1ec124d2c307a4257 upstream.
Commit 10d3be569243 ("tcp-tso: do not split TSO packets at retransmit
time") may directly retrans a multiple segments TSO/GSO packet without
split, Since this commit, we can no longer assume that a retransmitted
packet is a single segment.
This patch fixes the tp->undo_retrans accounting in tcp_sacktag_one()
that use the actual segments(pcount) of the retransmitted packet.
Before that commit (10d3be569243), the assumption underlying the
tp->undo_retrans-- seems correct.
Fixes: 10d3be569243 ("tcp-tso: do not split TSO packets at retransmit time")
Signed-off-by: zhenggy <zhenggy@chinatelecom.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/tcp_input.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1225,7 +1225,7 @@ static u8 tcp_sacktag_one(struct sock *s
if (dup_sack && (sacked & TCPCB_RETRANS)) {
if (tp->undo_marker && tp->undo_retrans > 0 &&
after(end_seq, tp->undo_marker))
- tp->undo_retrans--;
+ tp->undo_retrans = max_t(int, 0, tp->undo_retrans - pcount);
if (sacked & TCPCB_SACKED_ACKED)
state->reord = min(fack_count, state->reord);
}
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 204/217] ibmvnic: check failover_pending in login response
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (202 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 203/217] tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` Greg Kroah-Hartman
` (15 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sukadev Bhattiprolu, David S. Miller
From: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
commit 273c29e944bda9a20a30c26cfc34c9a3f363280b upstream.
If a failover occurs before a login response is received, the login
response buffer maybe undefined. Check that there was no failover
before accessing the login response buffer.
Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/ibm/ibmvnic.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -3965,6 +3965,14 @@ static int ibmvnic_probe(struct vio_dev
goto ibmvnic_init_fail;
} while (rc == EAGAIN);
+ if (adapter->failover_pending) {
+ adapter->init_done_rc = -EAGAIN;
+ netdev_dbg(netdev, "Failover pending, ignoring login response\n");
+ complete(&adapter->init_done);
+ /* login response buffer will be released on reset */
+ return 0;
+ }
+
netdev->mtu = adapter->req_mtu - ETH_HLEN;
rc = device_create_file(&dev->dev, &dev_attr_failover);
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 205/217] mm/memory_hotplug: use "unsigned long" for PFN in zone_for_pfn_range()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 002/217] xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG Greg Kroah-Hartman
` (218 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Michel Lespinasse, Kefeng Wang, Rafael J. Wysocki, Wei Yang,
Peter Zijlstra, Catalin Marinas, Dave Hansen, Michal Hocko,
Rich Felker, Paul Mackerras, H. Peter Anvin, Will Deacon,
Ard Biesheuvel, Laurent Dufour, Dave Jiang, Baoquan He,
Michael Ellerman, Michael S. Tsirkin, Christian Borntraeger,
Ingo Molnar, Benjamin Herrenschmidt, Anton Blanchard, Len Brown,
Nathan Lynch, Pavel Tatashin, Vasily Gorbik, Anshuman Khandual,
Heiko Carstens, Pankaj Gupta, Nicholas Piggin, Vishal Verma,
Borislav Petkov, Sergei Trofimovich, Andy Lutomirski,
Muchun Song, Jia He, Dan Williams, virtualization, Andrew Morton,
Vlastimil Babka, Oscar Salvador, Christophe Leroy, Pankaj Gupta,
Yoshinori Sato, Pierre Morel, Greg Kroah-Hartman, Scott Cheloha,
Rafael J. Wysocki, stable, Thomas Gleixner,
Thiago Jung Bauermann, Aneesh Kumar K.V, Joe Perches,
Linus Torvalds, Mike Rapoport
From: David Hildenbrand <david@redhat.com>
commit 7cf209ba8a86410939a24cb1aeb279479a7e0ca6 upstream.
Patch series "mm/memory_hotplug: preparatory patches for new online policy and memory"
These are all cleanups and one fix previously sent as part of [1]:
[PATCH v1 00/12] mm/memory_hotplug: "auto-movable" online policy and memory
groups.
These patches make sense even without the other series, therefore I pulled
them out to make the other series easier to digest.
[1] https://lkml.kernel.org/r/20210607195430.48228-1-david@redhat.com
This patch (of 4):
Checkpatch complained on a follow-up patch that we are using "unsigned"
here, which defaults to "unsigned int" and checkpatch is correct.
As we will search for a fitting zone using the wrong pfn, we might end
up onlining memory to one of the special kernel zones, such as ZONE_DMA,
which can end badly as the onlined memory does not satisfy properties of
these zones.
Use "unsigned long" instead, just as we do in other places when handling
PFNs. This can bite us once we have physical addresses in the range of
multiple TB.
Link: https://lkml.kernel.org/r/20210712124052.26491-2-david@redhat.com
Fixes: e5e689302633 ("mm, memory_hotplug: display allowed zones in the preferred ordering")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/memory_hotplug.h | 4 ++--
mm/memory_hotplug.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -332,6 +332,6 @@ extern struct page *sparse_decode_mem_ma
unsigned long pnum);
extern bool allow_online_pfn_range(int nid, unsigned long pfn, unsigned long nr_pages,
int online_type);
-extern struct zone *zone_for_pfn_range(int online_type, int nid, unsigned start_pfn,
- unsigned long nr_pages);
+extern struct zone *zone_for_pfn_range(int online_type, int nid,
+ unsigned long start_pfn, unsigned long nr_pages);
#endif /* __LINUX_MEMORY_HOTPLUG_H */
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -842,8 +842,8 @@ static inline struct zone *default_zone_
return movable_node_enabled ? movable_zone : kernel_zone;
}
-struct zone * zone_for_pfn_range(int online_type, int nid, unsigned start_pfn,
- unsigned long nr_pages)
+struct zone *zone_for_pfn_range(int online_type, int nid,
+ unsigned long start_pfn, unsigned long nr_pages)
{
if (online_type == MMOP_ONLINE_KERNEL)
return default_kernel_zone_for_pfn(nid, start_pfn, nr_pages);
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 225+ messages in thread* [PATCH 4.14 205/217] mm/memory_hotplug: use "unsigned long" for PFN in zone_for_pfn_range()
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
0 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David Hildenbrand, Pankaj Gupta,
Muchun Song, Oscar Salvador, Vitaly Kuznetsov,
Michael S. Tsirkin, Jason Wang, Pankaj Gupta, Wei Yang,
Michal Hocko, Dan Williams, Anshuman Khandual, Dave Hansen,
Vlastimil Babka, Mike Rapoport, Rafael J. Wysocki, Len Brown,
Pavel Tatashin, Heiko Carstens, Michael Ellerman,
Catalin Marinas, virtualization, Andy Lutomirski,
Aneesh Kumar K.V, Anton Blanchard, Ard Biesheuvel, Baoquan He,
Benjamin Herrenschmidt, Borislav Petkov, Christian Borntraeger,
Christophe Leroy, Dave Jiang, H. Peter Anvin, Ingo Molnar,
Jia He, Joe Perches, Kefeng Wang, Laurent Dufour,
Michel Lespinasse, Nathan Lynch, Nicholas Piggin, Paul Mackerras,
Peter Zijlstra, Pierre Morel, Rafael J. Wysocki, Rich Felker,
Scott Cheloha, Sergei Trofimovich, Thiago Jung Bauermann,
Thomas Gleixner, Vasily Gorbik, Vishal Verma, Will Deacon,
Yoshinori Sato, Andrew Morton, Linus Torvalds
From: David Hildenbrand <david@redhat.com>
commit 7cf209ba8a86410939a24cb1aeb279479a7e0ca6 upstream.
Patch series "mm/memory_hotplug: preparatory patches for new online policy and memory"
These are all cleanups and one fix previously sent as part of [1]:
[PATCH v1 00/12] mm/memory_hotplug: "auto-movable" online policy and memory
groups.
These patches make sense even without the other series, therefore I pulled
them out to make the other series easier to digest.
[1] https://lkml.kernel.org/r/20210607195430.48228-1-david@redhat.com
This patch (of 4):
Checkpatch complained on a follow-up patch that we are using "unsigned"
here, which defaults to "unsigned int" and checkpatch is correct.
As we will search for a fitting zone using the wrong pfn, we might end
up onlining memory to one of the special kernel zones, such as ZONE_DMA,
which can end badly as the onlined memory does not satisfy properties of
these zones.
Use "unsigned long" instead, just as we do in other places when handling
PFNs. This can bite us once we have physical addresses in the range of
multiple TB.
Link: https://lkml.kernel.org/r/20210712124052.26491-2-david@redhat.com
Fixes: e5e689302633 ("mm, memory_hotplug: display allowed zones in the preferred ordering")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/memory_hotplug.h | 4 ++--
mm/memory_hotplug.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -332,6 +332,6 @@ extern struct page *sparse_decode_mem_ma
unsigned long pnum);
extern bool allow_online_pfn_range(int nid, unsigned long pfn, unsigned long nr_pages,
int online_type);
-extern struct zone *zone_for_pfn_range(int online_type, int nid, unsigned start_pfn,
- unsigned long nr_pages);
+extern struct zone *zone_for_pfn_range(int online_type, int nid,
+ unsigned long start_pfn, unsigned long nr_pages);
#endif /* __LINUX_MEMORY_HOTPLUG_H */
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -842,8 +842,8 @@ static inline struct zone *default_zone_
return movable_node_enabled ? movable_zone : kernel_zone;
}
-struct zone * zone_for_pfn_range(int online_type, int nid, unsigned start_pfn,
- unsigned long nr_pages)
+struct zone *zone_for_pfn_range(int online_type, int nid,
+ unsigned long start_pfn, unsigned long nr_pages)
{
if (online_type == MMOP_ONLINE_KERNEL)
return default_kernel_zone_for_pfn(nid, start_pfn, nr_pages);
^ permalink raw reply [flat|nested] 225+ messages in thread
* [PATCH 4.14 206/217] dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equation
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (204 preceding siblings ...)
2021-09-20 16:43 ` Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 207/217] mfd: Dont use irq_create_mapping() to resolve a mapping Greg Kroah-Hartman
` (13 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ryan J. Barnett, Miquel Raynal,
Rob Herring, Sasha Levin
From: Miquel Raynal <miquel.raynal@bootlin.com>
[ Upstream commit 778cb8e39f6ec252be50fc3850d66f3dcbd5dd5a ]
"PAGESIZE / 512" is the number of ECC chunks.
"ECC_BYTES" is the number of bytes needed to store a single ECC code.
"2" is the space reserved by the bad block marker.
"2 + (PAGESIZE / 512) * ECC_BYTES" should of course be lower or equal
than the total number of OOB bytes, otherwise it won't fit.
Fix the equation by substituting s/>=/<=/.
Suggested-by: Ryan J. Barnett <ryan.barnett@collins.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20210610143945.3504781-1-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Documentation/devicetree/bindings/mtd/gpmc-nand.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index dd559045593d..d2d1bae63a36 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -123,7 +123,7 @@ on various other factors also like;
so the device should have enough free bytes available its OOB/Spare
area to accommodate ECC for entire page. In general following expression
helps in determining if given device can accommodate ECC syndrome:
- "2 + (PAGESIZE / 512) * ECC_BYTES" >= OOBSIZE"
+ "2 + (PAGESIZE / 512) * ECC_BYTES" <= OOBSIZE"
where
OOBSIZE number of bytes in OOB/spare area
PAGESIZE number of bytes in main-area of device page
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 207/217] mfd: Dont use irq_create_mapping() to resolve a mapping
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (205 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 206/217] dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equation Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 208/217] PCI: Add ACS quirks for Cavium multi-function devices Greg Kroah-Hartman
` (12 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Linus Walleij, Lee Jones,
Maxime Coquelin, Alexandre Torgue, Marc Zyngier, Sasha Levin
From: Marc Zyngier <maz@kernel.org>
[ Upstream commit 9ff80e2de36d0554e3a6da18a171719fe8663c17 ]
Although irq_create_mapping() is able to deal with duplicate
mappings, it really isn't supposed to be a substitute for
irq_find_mapping(), and can result in allocations that take place
in atomic context if the mapping didn't exist.
Fix the handful of MFD drivers that use irq_create_mapping() in
interrupt context by using irq_find_mapping() instead.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mfd/ab8500-core.c | 2 +-
drivers/mfd/stmpe.c | 4 ++--
drivers/mfd/tc3589x.c | 2 +-
drivers/mfd/wm8994-irq.c | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 11ab17f64c64..f0527e769867 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -493,7 +493,7 @@ static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500,
if (line == AB8540_INT_GPIO43F || line == AB8540_INT_GPIO44F)
line += 1;
- handle_nested_irq(irq_create_mapping(ab8500->domain, line));
+ handle_nested_irq(irq_find_mapping(ab8500->domain, line));
}
return 0;
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 566caca4efd8..722ad2c368a5 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -1035,7 +1035,7 @@ static irqreturn_t stmpe_irq(int irq, void *data)
if (variant->id_val == STMPE801_ID ||
variant->id_val == STMPE1600_ID) {
- int base = irq_create_mapping(stmpe->domain, 0);
+ int base = irq_find_mapping(stmpe->domain, 0);
handle_nested_irq(base);
return IRQ_HANDLED;
@@ -1063,7 +1063,7 @@ static irqreturn_t stmpe_irq(int irq, void *data)
while (status) {
int bit = __ffs(status);
int line = bank * 8 + bit;
- int nestedirq = irq_create_mapping(stmpe->domain, line);
+ int nestedirq = irq_find_mapping(stmpe->domain, line);
handle_nested_irq(nestedirq);
status &= ~(1 << bit);
diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
index cc9e563f23aa..7062baf60685 100644
--- a/drivers/mfd/tc3589x.c
+++ b/drivers/mfd/tc3589x.c
@@ -187,7 +187,7 @@ again:
while (status) {
int bit = __ffs(status);
- int virq = irq_create_mapping(tc3589x->domain, bit);
+ int virq = irq_find_mapping(tc3589x->domain, bit);
handle_nested_irq(virq);
status &= ~(1 << bit);
diff --git a/drivers/mfd/wm8994-irq.c b/drivers/mfd/wm8994-irq.c
index 18710f3b5c53..2c58d9b99a39 100644
--- a/drivers/mfd/wm8994-irq.c
+++ b/drivers/mfd/wm8994-irq.c
@@ -159,7 +159,7 @@ static irqreturn_t wm8994_edge_irq(int irq, void *data)
struct wm8994 *wm8994 = data;
while (gpio_get_value_cansleep(wm8994->pdata.irq_gpio))
- handle_nested_irq(irq_create_mapping(wm8994->edge_irq, 0));
+ handle_nested_irq(irq_find_mapping(wm8994->edge_irq, 0));
return IRQ_HANDLED;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 208/217] PCI: Add ACS quirks for Cavium multi-function devices
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (206 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 207/217] mfd: Dont use irq_create_mapping() to resolve a mapping Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 209/217] net: usb: cdc_mbim: avoid altsetting toggling for Telit LN920 Greg Kroah-Hartman
` (11 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, George Cherian, Bjorn Helgaas, Sasha Levin
From: George Cherian <george.cherian@marvell.com>
[ Upstream commit 32837d8a8f63eb95dcb9cd005524a27f06478832 ]
Some Cavium endpoints are implemented as multi-function devices without ACS
capability, but they actually don't support peer-to-peer transactions.
Add ACS quirks to declare DMA isolation for the following devices:
- BGX device found on Octeon-TX (8xxx)
- CGX device found on Octeon-TX2 (9xxx)
- RPM device found on Octeon-TX3 (10xxx)
Link: https://lore.kernel.org/r/20210810122425.1115156-1-george.cherian@marvell.com
Signed-off-by: George Cherian <george.cherian@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/quirks.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index d2164b88111e..eff361af792a 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4739,6 +4739,10 @@ static const struct pci_dev_acs_enabled {
{ 0x10df, 0x720, pci_quirk_mf_endpoint_acs }, /* Emulex Skyhawk-R */
/* Cavium ThunderX */
{ PCI_VENDOR_ID_CAVIUM, PCI_ANY_ID, pci_quirk_cavium_acs },
+ /* Cavium multi-function devices */
+ { PCI_VENDOR_ID_CAVIUM, 0xA026, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_CAVIUM, 0xA059, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_CAVIUM, 0xA060, pci_quirk_mf_endpoint_acs },
/* APM X-Gene */
{ PCI_VENDOR_ID_AMCC, 0xE004, pci_quirk_xgene_acs },
/* Ampere Computing */
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 209/217] net: usb: cdc_mbim: avoid altsetting toggling for Telit LN920
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (207 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 208/217] PCI: Add ACS quirks for Cavium multi-function devices Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 210/217] ethtool: Fix an error code in cxgb2.c Greg Kroah-Hartman
` (10 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Daniele Palmas, David S. Miller, Sasha Levin
From: Daniele Palmas <dnlplm@gmail.com>
[ Upstream commit aabbdc67f3485b5db27ab4eba01e5fbf1ffea62c ]
Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit LN920
0x1061 composition in order to avoid bind error.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/usb/cdc_mbim.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c
index 0362acd5cdca..cdd1b193fd4f 100644
--- a/drivers/net/usb/cdc_mbim.c
+++ b/drivers/net/usb/cdc_mbim.c
@@ -655,6 +655,11 @@ static const struct usb_device_id mbim_devs[] = {
.driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
},
+ /* Telit LN920 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x1061, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
+ },
+
/* default entry */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long)&cdc_mbim_info_zlp,
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 210/217] ethtool: Fix an error code in cxgb2.c
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (208 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 209/217] net: usb: cdc_mbim: avoid altsetting toggling for Telit LN920 Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 211/217] PCI: Sync __pci_register_driver() stub for CONFIG_PCI=n Greg Kroah-Hartman
` (9 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Abaci Robot, Yang Li,
David S. Miller, Sasha Levin
From: Yang Li <yang.lee@linux.alibaba.com>
[ Upstream commit 7db8263a12155c7ae4ad97e850f1e499c73765fc ]
When adapter->registered_device_map is NULL, the value of err is
uncertain, we set err to -EINVAL to avoid ambiguity.
Clean up smatch warning:
drivers/net/ethernet/chelsio/cxgb/cxgb2.c:1114 init_one() warn: missing
error code 'err'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/chelsio/cxgb/cxgb2.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/chelsio/cxgb/cxgb2.c b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
index 8623be13bf86..eef8fa100889 100644
--- a/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
+++ b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
@@ -1157,6 +1157,7 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (!adapter->registered_device_map) {
pr_err("%s: could not register any net devices\n",
pci_name(pdev));
+ err = -EINVAL;
goto out_release_adapter_res;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 211/217] PCI: Sync __pci_register_driver() stub for CONFIG_PCI=n
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (209 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 210/217] ethtool: Fix an error code in cxgb2.c Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 212/217] mtd: rawnand: cafe: Fix a resource leak in the error handling path of cafe_nand_probe() Greg Kroah-Hartman
` (8 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Andy Shevchenko,
Bjorn Helgaas, Sasha Levin
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Upstream commit 817f9916a6e96ae43acdd4e75459ef4f92d96eb1 ]
The CONFIG_PCI=y case got a new parameter long time ago. Sync the stub as
well.
[bhelgaas: add parameter names]
Fixes: 725522b5453d ("PCI: add the sysfs driver name to all modules")
Link: https://lore.kernel.org/r/20210813153619.89574-1-andriy.shevchenko@linux.intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/pci.h | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 59f4d10568c6..66c0d5fad0cb 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1633,8 +1633,9 @@ static inline int pci_enable_device(struct pci_dev *dev) { return -EIO; }
static inline void pci_disable_device(struct pci_dev *dev) { }
static inline int pci_assign_resource(struct pci_dev *dev, int i)
{ return -EBUSY; }
-static inline int __pci_register_driver(struct pci_driver *drv,
- struct module *owner)
+static inline int __must_check __pci_register_driver(struct pci_driver *drv,
+ struct module *owner,
+ const char *mod_name)
{ return 0; }
static inline int pci_register_driver(struct pci_driver *drv)
{ return 0; }
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 212/217] mtd: rawnand: cafe: Fix a resource leak in the error handling path of cafe_nand_probe()
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (210 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 211/217] PCI: Sync __pci_register_driver() stub for CONFIG_PCI=n Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` Greg Kroah-Hartman
` (7 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe JAILLET, Miquel Raynal,
Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit 6b430c7595e4eb95fae8fb54adc3c3ce002e75ae ]
A successful 'init_rs_non_canonical()' call should be balanced by a
corresponding 'free_rs()' call in the error handling path of the probe, as
already done in the remove function.
Update the error handling path accordingly.
Fixes: 8c61b7a7f4d4 ("[MTD] [NAND] Use rslib for CAFÉ ECC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/fd313d3fb787458bcc73189e349f481133a2cdc9.1629532640.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/nand/cafe_nand.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 98c013094fa2..ffc4ca1872e2 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -702,7 +702,7 @@ static int cafe_nand_probe(struct pci_dev *pdev,
"CAFE NAND", mtd);
if (err) {
dev_warn(&pdev->dev, "Could not register IRQ %d\n", pdev->irq);
- goto out_ior;
+ goto out_free_rs;
}
/* Disable master reset, enable NAND clock */
@@ -809,6 +809,8 @@ static int cafe_nand_probe(struct pci_dev *pdev,
/* Disable NAND IRQ in global IRQ mask register */
cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK);
free_irq(pdev->irq, mtd);
+ out_free_rs:
+ free_rs(cafe->rs);
out_ior:
pci_iounmap(pdev, cafe->mmio);
out_free_mtd:
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 213/217] ARC: export clear_user_page() for modules
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:40 ` [PATCH 4.14 002/217] xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG Greg Kroah-Hartman
` (218 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Randy Dunlap, kernel test robot,
Guenter Roeck, linux-snps-arc, Vineet Gupta, Sasha Levin
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit 6b5ff0405e4190f23780362ea324b250bc495683 ]
0day bot reports a build error:
ERROR: modpost: "clear_user_page" [drivers/media/v4l2-core/videobuf-dma-sg.ko] undefined!
so export it in arch/arc/ to fix the build error.
In most ARCHes, clear_user_page() is a macro. OTOH, in a few
ARCHes it is a function and needs to be exported.
PowerPC exported it in 2004. It looks like nds32 and nios2
still need to have it exported.
Fixes: 4102b53392d63 ("ARC: [mm] Aliasing VIPT dcache support 2/4")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arc/mm/cache.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index d14499500106..bf02efbee5e1 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -1118,7 +1118,7 @@ void clear_user_page(void *to, unsigned long u_vaddr, struct page *page)
clear_page(to);
clear_bit(PG_dc_clean, &page->flags);
}
-
+EXPORT_SYMBOL(clear_user_page);
/**********************************************************************
* Explicit Cache flush request from user space via syscall
--
2.30.2
_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 213/217] ARC: export clear_user_page() for modules
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
0 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Randy Dunlap, kernel test robot,
Guenter Roeck, linux-snps-arc, Vineet Gupta, Sasha Levin
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit 6b5ff0405e4190f23780362ea324b250bc495683 ]
0day bot reports a build error:
ERROR: modpost: "clear_user_page" [drivers/media/v4l2-core/videobuf-dma-sg.ko] undefined!
so export it in arch/arc/ to fix the build error.
In most ARCHes, clear_user_page() is a macro. OTOH, in a few
ARCHes it is a function and needs to be exported.
PowerPC exported it in 2004. It looks like nds32 and nios2
still need to have it exported.
Fixes: 4102b53392d63 ("ARC: [mm] Aliasing VIPT dcache support 2/4")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arc/mm/cache.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index d14499500106..bf02efbee5e1 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -1118,7 +1118,7 @@ void clear_user_page(void *to, unsigned long u_vaddr, struct page *page)
clear_page(to);
clear_bit(PG_dc_clean, &page->flags);
}
-
+EXPORT_SYMBOL(clear_user_page);
/**********************************************************************
* Explicit Cache flush request from user space via syscall
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread
* [PATCH 4.14 214/217] net: dsa: b53: Fix calculating number of switch ports
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (212 preceding siblings ...)
2021-09-20 16:43 ` Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 215/217] netfilter: socket: icmp6: fix use-after-scope Greg Kroah-Hartman
` (5 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Rafał Miłecki,
Florian Fainelli, David S. Miller, Sasha Levin
From: Rafał Miłecki <rafal@milecki.pl>
[ Upstream commit cdb067d31c0fe4cce98b9d15f1f2ef525acaa094 ]
It isn't true that CPU port is always the last one. Switches BCM5301x
have 9 ports (port 6 being inactive) and they use port 5 as CPU by
default (depending on design some other may be CPU ports too).
A more reliable way of determining number of ports is to check for the
last set bit in the "enabled_ports" bitfield.
This fixes b53 internal state, it will allow providing accurate info to
the DSA and is required to fix BCM5301x support.
Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/dsa/b53/b53_common.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 820aed3e2352..9fff49229435 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1843,9 +1843,8 @@ static int b53_switch_init(struct b53_device *dev)
dev->cpu_port = 5;
}
- /* cpu port is always last */
- dev->num_ports = dev->cpu_port + 1;
dev->enabled_ports |= BIT(dev->cpu_port);
+ dev->num_ports = fls(dev->enabled_ports);
dev->ports = devm_kzalloc(dev->dev,
sizeof(struct b53_port) * dev->num_ports,
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 215/217] netfilter: socket: icmp6: fix use-after-scope
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (213 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 214/217] net: dsa: b53: Fix calculating number of switch ports Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 216/217] qlcnic: Remove redundant unlock in qlcnic_pinit_from_rom Greg Kroah-Hartman
` (4 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Matthieu Baerts, Benjamin Hesmans,
Florian Westphal, Pablo Neira Ayuso, Sasha Levin
From: Benjamin Hesmans <benjamin.hesmans@tessares.net>
[ Upstream commit 730affed24bffcd1eebd5903171960f5ff9f1f22 ]
Bug reported by KASAN:
BUG: KASAN: use-after-scope in inet6_ehashfn (net/ipv6/inet6_hashtables.c:40)
Call Trace:
(...)
inet6_ehashfn (net/ipv6/inet6_hashtables.c:40)
(...)
nf_sk_lookup_slow_v6 (net/ipv6/netfilter/nf_socket_ipv6.c:91
net/ipv6/netfilter/nf_socket_ipv6.c:146)
It seems that this bug has already been fixed by Eric Dumazet in the
past in:
commit 78296c97ca1f ("netfilter: xt_socket: fix a stack corruption bug")
But a variant of the same issue has been introduced in
commit d64d80a2cde9 ("netfilter: x_tables: don't extract flow keys on early demuxed sks in socket match")
`daddr` and `saddr` potentially hold a reference to ipv6_var that is no
longer in scope when the call to `nf_socket_get_sock_v6` is made.
Fixes: d64d80a2cde9 ("netfilter: x_tables: don't extract flow keys on early demuxed sks in socket match")
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv6/netfilter/nf_socket_ipv6.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/net/ipv6/netfilter/nf_socket_ipv6.c b/net/ipv6/netfilter/nf_socket_ipv6.c
index f14de4b6d639..58e839e2ce1d 100644
--- a/net/ipv6/netfilter/nf_socket_ipv6.c
+++ b/net/ipv6/netfilter/nf_socket_ipv6.c
@@ -104,7 +104,7 @@ struct sock *nf_sk_lookup_slow_v6(struct net *net, const struct sk_buff *skb,
{
__be16 uninitialized_var(dport), uninitialized_var(sport);
const struct in6_addr *daddr = NULL, *saddr = NULL;
- struct ipv6hdr *iph = ipv6_hdr(skb);
+ struct ipv6hdr *iph = ipv6_hdr(skb), ipv6_var;
struct sk_buff *data_skb = NULL;
int doff = 0;
int thoff = 0, tproto;
@@ -134,8 +134,6 @@ struct sock *nf_sk_lookup_slow_v6(struct net *net, const struct sk_buff *skb,
thoff + sizeof(*hp);
} else if (tproto == IPPROTO_ICMPV6) {
- struct ipv6hdr ipv6_var;
-
if (extract_icmp6_fields(skb, thoff, &tproto, &saddr, &daddr,
&sport, &dport, &ipv6_var))
return NULL;
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 216/217] qlcnic: Remove redundant unlock in qlcnic_pinit_from_rom
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (214 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 215/217] netfilter: socket: icmp6: fix use-after-scope Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-20 16:43 ` [PATCH 4.14 217/217] net: renesas: sh_eth: Fix freeing wrong tx descriptor Greg Kroah-Hartman
` (3 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dinghao Liu, David S. Miller, Sasha Levin
From: Dinghao Liu <dinghao.liu@zju.edu.cn>
[ Upstream commit 9ddbc2a00d7f63fa9748f4278643193dac985f2d ]
Previous commit 68233c583ab4 removes the qlcnic_rom_lock()
in qlcnic_pinit_from_rom(), but remains its corresponding
unlock function, which is odd. I'm not very sure whether the
lock is missing, or the unlock is redundant. This bug is
suggested by a static analysis tool, please advise.
Fixes: 68233c583ab4 ("qlcnic: updated reset sequence")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
index c48a0e2d4d7e..6a009d51ec51 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
@@ -440,7 +440,6 @@ int qlcnic_pinit_from_rom(struct qlcnic_adapter *adapter)
QLCWR32(adapter, QLCNIC_CRB_PEG_NET_4 + 0x3c, 1);
msleep(20);
- qlcnic_rom_unlock(adapter);
/* big hammer don't reset CAM block on reset */
QLCWR32(adapter, QLCNIC_ROMUSB_GLB_SW_RESET, 0xfeffffff);
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* [PATCH 4.14 217/217] net: renesas: sh_eth: Fix freeing wrong tx descriptor
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (215 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 216/217] qlcnic: Remove redundant unlock in qlcnic_pinit_from_rom Greg Kroah-Hartman
@ 2021-09-20 16:43 ` Greg Kroah-Hartman
2021-09-21 12:11 ` [PATCH 4.14 000/217] 4.14.247-rc1 review Guenter Roeck
` (2 subsequent siblings)
219 siblings, 0 replies; 225+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-20 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yoshihiro Shimoda, David S. Miller,
Sasha Levin
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[ Upstream commit 0341d5e3d1ee2a36dd5a49b5bef2ce4ad1cfa6b4 ]
The cur_tx counter must be incremented after TACT bit of
txdesc->status was set. However, a CPU is possible to reorder
instructions and/or memory accesses between cur_tx and
txdesc->status. And then, if TX interrupt happened at such a
timing, the sh_eth_tx_free() may free the descriptor wrongly.
So, add wmb() before cur_tx++.
Otherwise NETDEV WATCHDOG timeout is possible to happen.
Fixes: 86a74ff21a7a ("net: sh_eth: add support for Renesas SuperH Ethernet")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/renesas/sh_eth.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 36f1019809ea..0fa6403ab085 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -2442,6 +2442,7 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
else
txdesc->status |= cpu_to_le32(TD_TACT);
+ wmb(); /* cur_tx must be incremented after TACT bit was set */
mdp->cur_tx++;
if (!(sh_eth_read(ndev, EDTRR) & sh_eth_get_edtrr_trns(mdp)))
--
2.30.2
^ permalink raw reply related [flat|nested] 225+ messages in thread* Re: [PATCH 4.14 000/217] 4.14.247-rc1 review
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (216 preceding siblings ...)
2021-09-20 16:43 ` [PATCH 4.14 217/217] net: renesas: sh_eth: Fix freeing wrong tx descriptor Greg Kroah-Hartman
@ 2021-09-21 12:11 ` Guenter Roeck
2021-09-21 13:28 ` Jon Hunter
2021-09-22 1:59 ` Samuel Zou
219 siblings, 0 replies; 225+ messages in thread
From: Guenter Roeck @ 2021-09-21 12:11 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, shuah, patches, lkft-triage, pavel,
jonathanh, f.fainelli, stable
On Mon, Sep 20, 2021 at 06:40:21PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.247 release.
> There are 217 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 22 Sep 2021 16:38:49 +0000.
> Anything received after that time might be too late.
>
drivers/net/ethernet/ibm/ibmvnic.c: In function 'ibmvnic_probe':
drivers/net/ethernet/ibm/ibmvnic.c:3968:20: error: 'struct ibmvnic_adapter' has no member named 'failover_pending'
Guenter
^ permalink raw reply [flat|nested] 225+ messages in thread* Re: [PATCH 4.14 000/217] 4.14.247-rc1 review
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (217 preceding siblings ...)
2021-09-21 12:11 ` [PATCH 4.14 000/217] 4.14.247-rc1 review Guenter Roeck
@ 2021-09-21 13:28 ` Jon Hunter
2021-09-22 1:59 ` Samuel Zou
219 siblings, 0 replies; 225+ messages in thread
From: Jon Hunter @ 2021-09-21 13:28 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, stable, linux-tegra
On Mon, 20 Sep 2021 18:40:21 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.247 release.
> There are 217 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 22 Sep 2021 16:38:49 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.247-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests passing for Tegra ...
Test results for stable-v4.14:
8 builds: 8 pass, 0 fail
16 boots: 16 pass, 0 fail
32 tests: 32 pass, 0 fail
Linux version: 4.14.247-rc1-g7c9c2ff5fef0
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Jon
^ permalink raw reply [flat|nested] 225+ messages in thread* Re: [PATCH 4.14 000/217] 4.14.247-rc1 review
2021-09-20 16:40 [PATCH 4.14 000/217] 4.14.247-rc1 review Greg Kroah-Hartman
` (218 preceding siblings ...)
2021-09-21 13:28 ` Jon Hunter
@ 2021-09-22 1:59 ` Samuel Zou
219 siblings, 0 replies; 225+ messages in thread
From: Samuel Zou @ 2021-09-22 1:59 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, shuah, patches, lkft-triage, pavel,
jonathanh, f.fainelli, stable
On 2021/9/21 0:40, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.247 release.
> There are 217 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 22 Sep 2021 16:38:49 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.247-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on x86 for 4.14.247-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.14.y
Version: 4.14.247-rc1
Commit: e883c2a5310932efee3eea2e4a742a1e4530cda3
Compiler: gcc version 7.3.0 (GCC)
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8837
passed: 8837
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <hulkrobot@huawei.com>
^ permalink raw reply [flat|nested] 225+ messages in thread