* [PULL v2 01/21] target/riscv: Update the ePMP CSR address
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
@ 2021-09-21 6:53 ` Alistair Francis
2021-09-21 6:53 ` [PULL v2 02/21] target/riscv: Fix satp write Alistair Francis
` (20 subsequent siblings)
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:53 UTC (permalink / raw)
To: qemu-devel, peter.maydell; +Cc: alistair23, Alistair Francis, Bin Meng
From: Alistair Francis <alistair.francis@wdc.com>
Update the ePMP CSRs to match the 0.9.3 ePMP spec
https://github.com/riscv/riscv-tee/blob/61455747230a26002d741f64879dd78cc9689323/Smepmp/Smepmp.pdf
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 28c908de60b9b04fa20e63d113885c98586053f3.1630543194.git.alistair.francis@wdc.com
---
target/riscv/cpu_bits.h | 4 ++--
target/riscv/cpu.c | 1 +
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h
index 7330ff5a19..ce9dcc030c 100644
--- a/target/riscv/cpu_bits.h
+++ b/target/riscv/cpu_bits.h
@@ -210,8 +210,8 @@
#define CSR_MTVAL2 0x34b
/* Enhanced Physical Memory Protection (ePMP) */
-#define CSR_MSECCFG 0x390
-#define CSR_MSECCFGH 0x391
+#define CSR_MSECCFG 0x747
+#define CSR_MSECCFGH 0x757
/* Physical Memory Protection */
#define CSR_PMPCFG0 0x3a0
#define CSR_PMPCFG1 0x3a1
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 13575c1408..d4d5961807 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -599,6 +599,7 @@ static Property riscv_cpu_properties[] = {
DEFINE_PROP_UINT16("elen", RISCVCPU, cfg.elen, 64),
DEFINE_PROP_BOOL("mmu", RISCVCPU, cfg.mmu, true),
DEFINE_PROP_BOOL("pmp", RISCVCPU, cfg.pmp, true),
+ /* ePMP 0.9.3 */
DEFINE_PROP_BOOL("x-epmp", RISCVCPU, cfg.epmp, false),
DEFINE_PROP_UINT64("resetvec", RISCVCPU, cfg.resetvec, DEFAULT_RSTVEC),
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PULL v2 02/21] target/riscv: Fix satp write
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
2021-09-21 6:53 ` [PULL v2 01/21] target/riscv: Update the ePMP CSR address Alistair Francis
@ 2021-09-21 6:53 ` Alistair Francis
2021-09-21 6:53 ` [PULL v2 03/21] target/riscv: Expose interrupt pending bits as GPIO lines Alistair Francis
` (19 subsequent siblings)
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:53 UTC (permalink / raw)
To: qemu-devel, peter.maydell
Cc: alistair23, LIU Zhiwei, Bin Meng, Alistair Francis
From: LIU Zhiwei <zhiwei_liu@c-sky.com>
These variables should be target_ulong. If truncated to int,
the bool conditions they indicate will be wrong.
As satp is very important for Linux, this bug almost fails every boot.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210901124539.222868-1-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
target/riscv/csr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/riscv/csr.c b/target/riscv/csr.c
index 50a2c3a3b4..ba9818f6a5 100644
--- a/target/riscv/csr.c
+++ b/target/riscv/csr.c
@@ -986,7 +986,7 @@ static RISCVException read_satp(CPURISCVState *env, int csrno,
static RISCVException write_satp(CPURISCVState *env, int csrno,
target_ulong val)
{
- int vm, mask, asid;
+ target_ulong vm, mask, asid;
if (!riscv_feature(env, RISCV_FEATURE_MMU)) {
return RISCV_EXCP_NONE;
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PULL v2 03/21] target/riscv: Expose interrupt pending bits as GPIO lines
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
2021-09-21 6:53 ` [PULL v2 01/21] target/riscv: Update the ePMP CSR address Alistair Francis
2021-09-21 6:53 ` [PULL v2 02/21] target/riscv: Fix satp write Alistair Francis
@ 2021-09-21 6:53 ` Alistair Francis
2021-09-21 6:53 ` [PULL v2 04/21] hw/intc: sifive_clint: Use RISC-V CPU " Alistair Francis
` (18 subsequent siblings)
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:53 UTC (permalink / raw)
To: qemu-devel, peter.maydell
Cc: alistair23, Alistair Francis, Philippe Mathieu-Daudé,
Richard Henderson, Bin Meng
From: Alistair Francis <alistair.francis@wdc.com>
Expose the 12 interrupt pending bits in MIP as GPIO lines.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 069d6162f0bc2f4a4f5a44e73f6442b11c703c53.1630301632.git.alistair.francis@wdc.com
---
target/riscv/cpu.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index d4d5961807..7c626d89cd 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -567,11 +567,41 @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp)
mcc->parent_realize(dev, errp);
}
+#ifndef CONFIG_USER_ONLY
+static void riscv_cpu_set_irq(void *opaque, int irq, int level)
+{
+ RISCVCPU *cpu = RISCV_CPU(opaque);
+
+ switch (irq) {
+ case IRQ_U_SOFT:
+ case IRQ_S_SOFT:
+ case IRQ_VS_SOFT:
+ case IRQ_M_SOFT:
+ case IRQ_U_TIMER:
+ case IRQ_S_TIMER:
+ case IRQ_VS_TIMER:
+ case IRQ_M_TIMER:
+ case IRQ_U_EXT:
+ case IRQ_S_EXT:
+ case IRQ_VS_EXT:
+ case IRQ_M_EXT:
+ riscv_cpu_update_mip(cpu, 1 << irq, BOOL_TO_MASK(level));
+ break;
+ default:
+ g_assert_not_reached();
+ }
+}
+#endif /* CONFIG_USER_ONLY */
+
static void riscv_cpu_init(Object *obj)
{
RISCVCPU *cpu = RISCV_CPU(obj);
cpu_set_cpustate_pointers(cpu);
+
+#ifndef CONFIG_USER_ONLY
+ qdev_init_gpio_in(DEVICE(cpu), riscv_cpu_set_irq, 12);
+#endif /* CONFIG_USER_ONLY */
}
static Property riscv_cpu_properties[] = {
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PULL v2 04/21] hw/intc: sifive_clint: Use RISC-V CPU GPIO lines
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
` (2 preceding siblings ...)
2021-09-21 6:53 ` [PULL v2 03/21] target/riscv: Expose interrupt pending bits as GPIO lines Alistair Francis
@ 2021-09-21 6:53 ` Alistair Francis
2021-09-21 6:53 ` [PULL v2 05/21] hw/intc: ibex_plic: Convert the PLIC to use " Alistair Francis
` (17 subsequent siblings)
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:53 UTC (permalink / raw)
To: qemu-devel, peter.maydell
Cc: alistair23, Alistair Francis, Bin Meng, LIU Zhiwei
From: Alistair Francis <alistair.francis@wdc.com>
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V
CPU GPIO lines to set the timer and soft MIP bits.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Message-id: 946e1ef5e268b24084c7ddad84c146de62a56736.1630301632.git.alistair.francis@wdc.com
---
include/hw/intc/sifive_clint.h | 2 +
hw/intc/sifive_clint.c | 68 ++++++++++++++++++++++++----------
2 files changed, 50 insertions(+), 20 deletions(-)
diff --git a/include/hw/intc/sifive_clint.h b/include/hw/intc/sifive_clint.h
index a30be0f3d6..921b1561dd 100644
--- a/include/hw/intc/sifive_clint.h
+++ b/include/hw/intc/sifive_clint.h
@@ -40,6 +40,8 @@ typedef struct SiFiveCLINTState {
uint32_t time_base;
uint32_t aperture_size;
uint32_t timebase_freq;
+ qemu_irq *timer_irqs;
+ qemu_irq *soft_irqs;
} SiFiveCLINTState;
DeviceState *sifive_clint_create(hwaddr addr, hwaddr size,
diff --git a/hw/intc/sifive_clint.c b/hw/intc/sifive_clint.c
index 99c870ced2..ab172d8e40 100644
--- a/hw/intc/sifive_clint.c
+++ b/hw/intc/sifive_clint.c
@@ -28,6 +28,12 @@
#include "hw/qdev-properties.h"
#include "hw/intc/sifive_clint.h"
#include "qemu/timer.h"
+#include "hw/irq.h"
+
+typedef struct sifive_clint_callback {
+ SiFiveCLINTState *s;
+ int num;
+} sifive_clint_callback;
static uint64_t cpu_riscv_read_rtc(uint32_t timebase_freq)
{
@@ -39,7 +45,9 @@ static uint64_t cpu_riscv_read_rtc(uint32_t timebase_freq)
* Called when timecmp is written to update the QEMU timer or immediately
* trigger timer interrupt if mtimecmp <= current timer value.
*/
-static void sifive_clint_write_timecmp(RISCVCPU *cpu, uint64_t value,
+static void sifive_clint_write_timecmp(SiFiveCLINTState *s, RISCVCPU *cpu,
+ int hartid,
+ uint64_t value,
uint32_t timebase_freq)
{
uint64_t next;
@@ -51,12 +59,12 @@ static void sifive_clint_write_timecmp(RISCVCPU *cpu, uint64_t value,
if (cpu->env.timecmp <= rtc_r) {
/* if we're setting an MTIMECMP value in the "past",
immediately raise the timer interrupt */
- riscv_cpu_update_mip(cpu, MIP_MTIP, BOOL_TO_MASK(1));
+ qemu_irq_raise(s->timer_irqs[hartid - s->hartid_base]);
return;
}
/* otherwise, set up the future timer interrupt */
- riscv_cpu_update_mip(cpu, MIP_MTIP, BOOL_TO_MASK(0));
+ qemu_irq_lower(s->timer_irqs[hartid - s->hartid_base]);
diff = cpu->env.timecmp - rtc_r;
/* back to ns (note args switched in muldiv64) */
uint64_t ns_diff = muldiv64(diff, NANOSECONDS_PER_SECOND, timebase_freq);
@@ -91,8 +99,9 @@ static void sifive_clint_write_timecmp(RISCVCPU *cpu, uint64_t value,
*/
static void sifive_clint_timer_cb(void *opaque)
{
- RISCVCPU *cpu = opaque;
- riscv_cpu_update_mip(cpu, MIP_MTIP, BOOL_TO_MASK(1));
+ sifive_clint_callback *state = opaque;
+
+ qemu_irq_raise(state->s->timer_irqs[state->num]);
}
/* CPU wants to read rtc or timecmp register */
@@ -158,7 +167,7 @@ static void sifive_clint_write(void *opaque, hwaddr addr, uint64_t value,
if (!env) {
error_report("clint: invalid timecmp hartid: %zu", hartid);
} else if ((addr & 0x3) == 0) {
- riscv_cpu_update_mip(RISCV_CPU(cpu), MIP_MSIP, BOOL_TO_MASK(value));
+ qemu_set_irq(clint->soft_irqs[hartid - clint->hartid_base], value);
} else {
error_report("clint: invalid sip write: %08x", (uint32_t)addr);
}
@@ -174,13 +183,13 @@ static void sifive_clint_write(void *opaque, hwaddr addr, uint64_t value,
} else if ((addr & 0x7) == 0) {
/* timecmp_lo */
uint64_t timecmp_hi = env->timecmp >> 32;
- sifive_clint_write_timecmp(RISCV_CPU(cpu),
+ sifive_clint_write_timecmp(clint, RISCV_CPU(cpu), hartid,
timecmp_hi << 32 | (value & 0xFFFFFFFF), clint->timebase_freq);
return;
} else if ((addr & 0x7) == 4) {
/* timecmp_hi */
uint64_t timecmp_lo = env->timecmp;
- sifive_clint_write_timecmp(RISCV_CPU(cpu),
+ sifive_clint_write_timecmp(clint, RISCV_CPU(cpu), hartid,
value << 32 | (timecmp_lo & 0xFFFFFFFF), clint->timebase_freq);
} else {
error_report("clint: invalid timecmp write: %08x", (uint32_t)addr);
@@ -226,6 +235,12 @@ static void sifive_clint_realize(DeviceState *dev, Error **errp)
memory_region_init_io(&s->mmio, OBJECT(dev), &sifive_clint_ops, s,
TYPE_SIFIVE_CLINT, s->aperture_size);
sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio);
+
+ s->timer_irqs = g_malloc(sizeof(qemu_irq) * s->num_harts);
+ qdev_init_gpio_out(dev, s->timer_irqs, s->num_harts);
+
+ s->soft_irqs = g_malloc(sizeof(qemu_irq) * s->num_harts);
+ qdev_init_gpio_out(dev, s->soft_irqs, s->num_harts);
}
static void sifive_clint_class_init(ObjectClass *klass, void *data)
@@ -249,7 +264,6 @@ static void sifive_clint_register_types(void)
type_init(sifive_clint_register_types)
-
/*
* Create CLINT device.
*/
@@ -259,29 +273,43 @@ DeviceState *sifive_clint_create(hwaddr addr, hwaddr size,
bool provide_rdtime)
{
int i;
+
+ DeviceState *dev = qdev_new(TYPE_SIFIVE_CLINT);
+ qdev_prop_set_uint32(dev, "hartid-base", hartid_base);
+ qdev_prop_set_uint32(dev, "num-harts", num_harts);
+ qdev_prop_set_uint32(dev, "sip-base", sip_base);
+ qdev_prop_set_uint32(dev, "timecmp-base", timecmp_base);
+ qdev_prop_set_uint32(dev, "time-base", time_base);
+ qdev_prop_set_uint32(dev, "aperture-size", size);
+ qdev_prop_set_uint32(dev, "timebase-freq", timebase_freq);
+ sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
+ sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr);
+
for (i = 0; i < num_harts; i++) {
CPUState *cpu = qemu_get_cpu(hartid_base + i);
+ RISCVCPU *rvcpu = RISCV_CPU(cpu);
CPURISCVState *env = cpu ? cpu->env_ptr : NULL;
+ sifive_clint_callback *cb = g_malloc0(sizeof(sifive_clint_callback));
+
if (!env) {
+ g_free(cb);
continue;
}
if (provide_rdtime) {
riscv_cpu_set_rdtime_fn(env, cpu_riscv_read_rtc, timebase_freq);
}
+
+ cb->s = SIFIVE_CLINT(dev);
+ cb->num = i;
env->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
- &sifive_clint_timer_cb, cpu);
+ &sifive_clint_timer_cb, cb);
env->timecmp = 0;
+
+ qdev_connect_gpio_out(dev, i,
+ qdev_get_gpio_in(DEVICE(rvcpu), IRQ_M_TIMER));
+ qdev_connect_gpio_out(dev, num_harts + i,
+ qdev_get_gpio_in(DEVICE(rvcpu), IRQ_M_SOFT));
}
- DeviceState *dev = qdev_new(TYPE_SIFIVE_CLINT);
- qdev_prop_set_uint32(dev, "hartid-base", hartid_base);
- qdev_prop_set_uint32(dev, "num-harts", num_harts);
- qdev_prop_set_uint32(dev, "sip-base", sip_base);
- qdev_prop_set_uint32(dev, "timecmp-base", timecmp_base);
- qdev_prop_set_uint32(dev, "time-base", time_base);
- qdev_prop_set_uint32(dev, "aperture-size", size);
- qdev_prop_set_uint32(dev, "timebase-freq", timebase_freq);
- sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
- sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr);
return dev;
}
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PULL v2 05/21] hw/intc: ibex_plic: Convert the PLIC to use RISC-V CPU GPIO lines
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
` (3 preceding siblings ...)
2021-09-21 6:53 ` [PULL v2 04/21] hw/intc: sifive_clint: Use RISC-V CPU " Alistair Francis
@ 2021-09-21 6:53 ` Alistair Francis
2021-09-21 6:53 ` [PULL v2 06/21] hw/intc: sifive_plic: " Alistair Francis
` (16 subsequent siblings)
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:53 UTC (permalink / raw)
To: qemu-devel, peter.maydell
Cc: alistair23, Alistair Francis, Philippe Mathieu-Daudé,
Richard Henderson
From: Alistair Francis <alistair.francis@wdc.com>
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V
CPU GPIO lines to set the external MIP bits.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 0a76946981852f5bd15f0c37ab35b253371027a8.1630301632.git.alistair.francis@wdc.com
---
include/hw/intc/ibex_plic.h | 2 ++
hw/intc/ibex_plic.c | 17 ++++++-----------
hw/riscv/opentitan.c | 8 ++++++++
3 files changed, 16 insertions(+), 11 deletions(-)
diff --git a/include/hw/intc/ibex_plic.h b/include/hw/intc/ibex_plic.h
index 7fc495db99..d596436e06 100644
--- a/include/hw/intc/ibex_plic.h
+++ b/include/hw/intc/ibex_plic.h
@@ -60,6 +60,8 @@ struct IbexPlicState {
uint32_t threshold_base;
uint32_t claim_base;
+
+ qemu_irq *external_irqs;
};
#endif /* HW_IBEX_PLIC_H */
diff --git a/hw/intc/ibex_plic.c b/hw/intc/ibex_plic.c
index edf76e4f61..ff430356f8 100644
--- a/hw/intc/ibex_plic.c
+++ b/hw/intc/ibex_plic.c
@@ -27,6 +27,7 @@
#include "target/riscv/cpu_bits.h"
#include "target/riscv/cpu.h"
#include "hw/intc/ibex_plic.h"
+#include "hw/irq.h"
static bool addr_between(uint32_t addr, uint32_t base, uint32_t num)
{
@@ -92,19 +93,10 @@ static bool ibex_plic_irqs_pending(IbexPlicState *s, uint32_t context)
static void ibex_plic_update(IbexPlicState *s)
{
- CPUState *cpu;
- int level, i;
+ int i;
for (i = 0; i < s->num_cpus; i++) {
- cpu = qemu_get_cpu(i);
-
- if (!cpu) {
- continue;
- }
-
- level = ibex_plic_irqs_pending(s, 0);
-
- riscv_cpu_update_mip(RISCV_CPU(cpu), MIP_MEIP, BOOL_TO_MASK(level));
+ qemu_set_irq(s->external_irqs[i], ibex_plic_irqs_pending(s, 0));
}
}
@@ -268,6 +260,9 @@ static void ibex_plic_realize(DeviceState *dev, Error **errp)
qdev_init_gpio_in(dev, ibex_plic_irq_request, s->num_sources);
+ s->external_irqs = g_malloc(sizeof(qemu_irq) * s->num_cpus);
+ qdev_init_gpio_out(dev, s->external_irqs, s->num_cpus);
+
/*
* We can't allow the supervisor to control SEIP as this would allow the
* supervisor to clear a pending external interrupt which will result in
diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c
index 36a41c8b5b..048aced0ec 100644
--- a/hw/riscv/opentitan.c
+++ b/hw/riscv/opentitan.c
@@ -118,6 +118,7 @@ static void lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
MachineState *ms = MACHINE(qdev_get_machine());
LowRISCIbexSoCState *s = RISCV_IBEX_SOC(dev_soc);
MemoryRegion *sys_mem = get_system_memory();
+ int i;
object_property_set_str(OBJECT(&s->cpus), "cpu-type", ms->cpu_type,
&error_abort);
@@ -149,6 +150,13 @@ static void lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->plic), 0, memmap[IBEX_DEV_PLIC].base);
+ for (i = 0; i < ms->smp.cpus; i++) {
+ CPUState *cpu = qemu_get_cpu(i);
+
+ qdev_connect_gpio_out(DEVICE(&s->plic), i,
+ qdev_get_gpio_in(DEVICE(cpu), IRQ_M_EXT));
+ }
+
/* UART */
qdev_prop_set_chr(DEVICE(&(s->uart)), "chardev", serial_hd(0));
if (!sysbus_realize(SYS_BUS_DEVICE(&s->uart), errp)) {
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PULL v2 06/21] hw/intc: sifive_plic: Convert the PLIC to use RISC-V CPU GPIO lines
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
` (4 preceding siblings ...)
2021-09-21 6:53 ` [PULL v2 05/21] hw/intc: ibex_plic: Convert the PLIC to use " Alistair Francis
@ 2021-09-21 6:53 ` Alistair Francis
2021-09-21 6:53 ` [PULL v2 07/21] hw/intc: ibex_timer: Convert the timer " Alistair Francis
` (15 subsequent siblings)
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:53 UTC (permalink / raw)
To: qemu-devel, peter.maydell
Cc: alistair23, Alistair Francis, Philippe Mathieu-Daudé,
Richard Henderson, Bin Meng
From: Alistair Francis <alistair.francis@wdc.com>
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V
CPU GPIO lines to set the external MIP bits.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 0364190bfa935058a845c0fa1ecf650328840ad5.1630301632.git.alistair.francis@wdc.com
---
include/hw/intc/sifive_plic.h | 4 ++++
hw/intc/sifive_plic.c | 30 +++++++++++++++++++++++-------
hw/riscv/microchip_pfsoc.c | 2 +-
hw/riscv/shakti_c.c | 3 ++-
hw/riscv/sifive_e.c | 2 +-
hw/riscv/sifive_u.c | 2 +-
hw/riscv/virt.c | 2 +-
7 files changed, 33 insertions(+), 12 deletions(-)
diff --git a/include/hw/intc/sifive_plic.h b/include/hw/intc/sifive_plic.h
index 1e451a270c..134cf39a96 100644
--- a/include/hw/intc/sifive_plic.h
+++ b/include/hw/intc/sifive_plic.h
@@ -72,9 +72,13 @@ struct SiFivePLICState {
uint32_t context_base;
uint32_t context_stride;
uint32_t aperture_size;
+
+ qemu_irq *m_external_irqs;
+ qemu_irq *s_external_irqs;
};
DeviceState *sifive_plic_create(hwaddr addr, char *hart_config,
+ uint32_t num_harts,
uint32_t hartid_base, uint32_t num_sources,
uint32_t num_priorities, uint32_t priority_base,
uint32_t pending_base, uint32_t enable_base,
diff --git a/hw/intc/sifive_plic.c b/hw/intc/sifive_plic.c
index 78903beb06..9ba36dc0b3 100644
--- a/hw/intc/sifive_plic.c
+++ b/hw/intc/sifive_plic.c
@@ -29,6 +29,7 @@
#include "hw/intc/sifive_plic.h"
#include "target/riscv/cpu.h"
#include "migration/vmstate.h"
+#include "hw/irq.h"
#define RISCV_DEBUG_PLIC 0
@@ -139,18 +140,14 @@ static void sifive_plic_update(SiFivePLICState *plic)
for (addrid = 0; addrid < plic->num_addrs; addrid++) {
uint32_t hartid = plic->addr_config[addrid].hartid;
PLICMode mode = plic->addr_config[addrid].mode;
- CPUState *cpu = qemu_get_cpu(hartid);
- CPURISCVState *env = cpu ? cpu->env_ptr : NULL;
- if (!env) {
- continue;
- }
int level = sifive_plic_irqs_pending(plic, addrid);
+
switch (mode) {
case PLICMode_M:
- riscv_cpu_update_mip(RISCV_CPU(cpu), MIP_MEIP, BOOL_TO_MASK(level));
+ qemu_set_irq(plic->m_external_irqs[hartid - plic->hartid_base], level);
break;
case PLICMode_S:
- riscv_cpu_update_mip(RISCV_CPU(cpu), MIP_SEIP, BOOL_TO_MASK(level));
+ qemu_set_irq(plic->s_external_irqs[hartid - plic->hartid_base], level);
break;
default:
break;
@@ -456,6 +453,12 @@ static void sifive_plic_realize(DeviceState *dev, Error **errp)
sysbus_init_mmio(SYS_BUS_DEVICE(dev), &plic->mmio);
qdev_init_gpio_in(dev, sifive_plic_irq_request, plic->num_sources);
+ plic->s_external_irqs = g_malloc(sizeof(qemu_irq) * plic->num_harts);
+ qdev_init_gpio_out(dev, plic->s_external_irqs, plic->num_harts);
+
+ plic->m_external_irqs = g_malloc(sizeof(qemu_irq) * plic->num_harts);
+ qdev_init_gpio_out(dev, plic->m_external_irqs, plic->num_harts);
+
/* We can't allow the supervisor to control SEIP as this would allow the
* supervisor to clear a pending external interrupt which will result in
* lost a interrupt in the case a PLIC is attached. The SEIP bit must be
@@ -520,6 +523,7 @@ type_init(sifive_plic_register_types)
* Create PLIC device.
*/
DeviceState *sifive_plic_create(hwaddr addr, char *hart_config,
+ uint32_t num_harts,
uint32_t hartid_base, uint32_t num_sources,
uint32_t num_priorities, uint32_t priority_base,
uint32_t pending_base, uint32_t enable_base,
@@ -527,6 +531,8 @@ DeviceState *sifive_plic_create(hwaddr addr, char *hart_config,
uint32_t context_stride, uint32_t aperture_size)
{
DeviceState *dev = qdev_new(TYPE_SIFIVE_PLIC);
+ int i;
+
assert(enable_stride == (enable_stride & -enable_stride));
assert(context_stride == (context_stride & -context_stride));
qdev_prop_set_string(dev, "hart-config", hart_config);
@@ -542,5 +548,15 @@ DeviceState *sifive_plic_create(hwaddr addr, char *hart_config,
qdev_prop_set_uint32(dev, "aperture-size", aperture_size);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr);
+
+ for (i = 0; i < num_harts; i++) {
+ CPUState *cpu = qemu_get_cpu(hartid_base + i);
+
+ qdev_connect_gpio_out(dev, i,
+ qdev_get_gpio_in(DEVICE(cpu), IRQ_S_EXT));
+ qdev_connect_gpio_out(dev, num_harts + i,
+ qdev_get_gpio_in(DEVICE(cpu), IRQ_M_EXT));
+ }
+
return dev;
}
diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c
index eb8e79e0a1..eef55f69fd 100644
--- a/hw/riscv/microchip_pfsoc.c
+++ b/hw/riscv/microchip_pfsoc.c
@@ -274,7 +274,7 @@ static void microchip_pfsoc_soc_realize(DeviceState *dev, Error **errp)
/* PLIC */
s->plic = sifive_plic_create(memmap[MICROCHIP_PFSOC_PLIC].base,
- plic_hart_config, 0,
+ plic_hart_config, ms->smp.cpus, 0,
MICROCHIP_PFSOC_PLIC_NUM_SOURCES,
MICROCHIP_PFSOC_PLIC_NUM_PRIORITIES,
MICROCHIP_PFSOC_PLIC_PRIORITY_BASE,
diff --git a/hw/riscv/shakti_c.c b/hw/riscv/shakti_c.c
index 18f70fadaa..09d4e1433e 100644
--- a/hw/riscv/shakti_c.c
+++ b/hw/riscv/shakti_c.c
@@ -106,13 +106,14 @@ type_init(shakti_c_machine_type_info_register)
static void shakti_c_soc_state_realize(DeviceState *dev, Error **errp)
{
+ MachineState *ms = MACHINE(qdev_get_machine());
ShaktiCSoCState *sss = RISCV_SHAKTI_SOC(dev);
MemoryRegion *system_memory = get_system_memory();
sysbus_realize(SYS_BUS_DEVICE(&sss->cpus), &error_abort);
sss->plic = sifive_plic_create(shakti_c_memmap[SHAKTI_C_PLIC].base,
- (char *)SHAKTI_C_PLIC_HART_CONFIG, 0,
+ (char *)SHAKTI_C_PLIC_HART_CONFIG, ms->smp.cpus, 0,
SHAKTI_C_PLIC_NUM_SOURCES,
SHAKTI_C_PLIC_NUM_PRIORITIES,
SHAKTI_C_PLIC_PRIORITY_BASE,
diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c
index 5b7b245e1f..04265c5640 100644
--- a/hw/riscv/sifive_e.c
+++ b/hw/riscv/sifive_e.c
@@ -197,7 +197,7 @@ static void sifive_e_soc_realize(DeviceState *dev, Error **errp)
/* MMIO */
s->plic = sifive_plic_create(memmap[SIFIVE_E_DEV_PLIC].base,
- (char *)SIFIVE_E_PLIC_HART_CONFIG, 0,
+ (char *)SIFIVE_E_PLIC_HART_CONFIG, ms->smp.cpus, 0,
SIFIVE_E_PLIC_NUM_SOURCES,
SIFIVE_E_PLIC_NUM_PRIORITIES,
SIFIVE_E_PLIC_PRIORITY_BASE,
diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 6cc1a62b0f..6766edc1d0 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -832,7 +832,7 @@ static void sifive_u_soc_realize(DeviceState *dev, Error **errp)
/* MMIO */
s->plic = sifive_plic_create(memmap[SIFIVE_U_DEV_PLIC].base,
- plic_hart_config, 0,
+ plic_hart_config, ms->smp.cpus, 0,
SIFIVE_U_PLIC_NUM_SOURCES,
SIFIVE_U_PLIC_NUM_PRIORITIES,
SIFIVE_U_PLIC_PRIORITY_BASE,
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 5624adda58..47f1beb473 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -625,7 +625,7 @@ static void virt_machine_init(MachineState *machine)
/* Per-socket PLIC */
s->plic[i] = sifive_plic_create(
memmap[VIRT_PLIC].base + i * memmap[VIRT_PLIC].size,
- plic_hart_config, base_hartid,
+ plic_hart_config, hart_count, base_hartid,
VIRT_PLIC_NUM_SOURCES,
VIRT_PLIC_NUM_PRIORITIES,
VIRT_PLIC_PRIORITY_BASE,
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PULL v2 07/21] hw/intc: ibex_timer: Convert the timer to use RISC-V CPU GPIO lines
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
` (5 preceding siblings ...)
2021-09-21 6:53 ` [PULL v2 06/21] hw/intc: sifive_plic: " Alistair Francis
@ 2021-09-21 6:53 ` Alistair Francis
2021-09-21 6:53 ` [PULL v2 08/21] hw/timer: Add SiFive PWM support Alistair Francis
` (14 subsequent siblings)
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:53 UTC (permalink / raw)
To: qemu-devel, peter.maydell
Cc: alistair23, Alistair Francis, Philippe Mathieu-Daudé,
Richard Henderson
From: Alistair Francis <alistair.francis@wdc.com>
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V
CPU GPIO lines to set the timer MIP bits.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 84d5b1d5783d2e79eee69a2f7ac480cc0c070db3.1630301632.git.alistair.francis@wdc.com
---
include/hw/timer/ibex_timer.h | 2 ++
hw/riscv/opentitan.c | 3 +++
hw/timer/ibex_timer.c | 17 ++++++++++++-----
3 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/include/hw/timer/ibex_timer.h b/include/hw/timer/ibex_timer.h
index 6a43537003..b6f69b38ee 100644
--- a/include/hw/timer/ibex_timer.h
+++ b/include/hw/timer/ibex_timer.h
@@ -48,5 +48,7 @@ struct IbexTimerState {
uint32_t timebase_freq;
qemu_irq irq;
+
+ qemu_irq m_timer_irq;
};
#endif /* HW_IBEX_TIMER_H */
diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c
index 048aced0ec..f7cfcf1c3a 100644
--- a/hw/riscv/opentitan.c
+++ b/hw/riscv/opentitan.c
@@ -183,6 +183,9 @@ static void lowrisc_ibex_soc_realize(DeviceState *dev_soc, Error **errp)
sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer),
0, qdev_get_gpio_in(DEVICE(&s->plic),
IBEX_TIMER_TIMEREXPIRED0_0));
+ qdev_connect_gpio_out(DEVICE(&s->timer), 0,
+ qdev_get_gpio_in(DEVICE(qemu_get_cpu(0)),
+ IRQ_M_TIMER));
create_unimplemented_device("riscv.lowrisc.ibex.gpio",
memmap[IBEX_DEV_GPIO].base, memmap[IBEX_DEV_GPIO].size);
diff --git a/hw/timer/ibex_timer.c b/hw/timer/ibex_timer.c
index 5befb53506..66e1f8e48c 100644
--- a/hw/timer/ibex_timer.c
+++ b/hw/timer/ibex_timer.c
@@ -77,7 +77,7 @@ static void ibex_timer_update_irqs(IbexTimerState *s)
/*
* If the mtimecmp was in the past raise the interrupt now.
*/
- riscv_cpu_update_mip(cpu, MIP_MTIP, BOOL_TO_MASK(1));
+ qemu_irq_raise(s->m_timer_irq);
if (s->timer_intr_enable & R_INTR_ENABLE_IE_0_MASK) {
s->timer_intr_state |= R_INTR_STATE_IS_0_MASK;
qemu_set_irq(s->irq, true);
@@ -86,7 +86,7 @@ static void ibex_timer_update_irqs(IbexTimerState *s)
}
/* Setup a timer to trigger the interrupt in the future */
- riscv_cpu_update_mip(cpu, MIP_MTIP, BOOL_TO_MASK(0));
+ qemu_irq_lower(s->m_timer_irq);
qemu_set_irq(s->irq, false);
diff = cpu->env.timecmp - now;
@@ -106,10 +106,8 @@ static void ibex_timer_update_irqs(IbexTimerState *s)
static void ibex_timer_cb(void *opaque)
{
IbexTimerState *s = opaque;
- CPUState *cs = qemu_get_cpu(0);
- RISCVCPU *cpu = RISCV_CPU(cs);
- riscv_cpu_update_mip(cpu, MIP_MTIP, BOOL_TO_MASK(1));
+ qemu_irq_raise(s->m_timer_irq);
if (s->timer_intr_enable & R_INTR_ENABLE_IE_0_MASK) {
s->timer_intr_state |= R_INTR_STATE_IS_0_MASK;
qemu_set_irq(s->irq, true);
@@ -280,12 +278,21 @@ static void ibex_timer_init(Object *obj)
sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
}
+static void ibex_timer_realize(DeviceState *dev, Error **errp)
+{
+ IbexTimerState *s = IBEX_TIMER(dev);
+
+ qdev_init_gpio_out(dev, &s->m_timer_irq, 1);
+}
+
+
static void ibex_timer_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->reset = ibex_timer_reset;
dc->vmsd = &vmstate_ibex_timer;
+ dc->realize = ibex_timer_realize;
device_class_set_props(dc, ibex_timer_properties);
}
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PULL v2 08/21] hw/timer: Add SiFive PWM support
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
` (6 preceding siblings ...)
2021-09-21 6:53 ` [PULL v2 07/21] hw/intc: ibex_timer: Convert the timer " Alistair Francis
@ 2021-09-21 6:53 ` Alistair Francis
2021-09-21 6:54 ` [PULL v2 09/21] sifive_u: Connect the SiFive PWM device Alistair Francis
` (13 subsequent siblings)
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:53 UTC (permalink / raw)
To: qemu-devel, peter.maydell
Cc: alistair23, Alistair Francis, Justin Restivo, Alexandra Clifford,
Amanda Strnad, Bin Meng
From: Alistair Francis <alistair.francis@wdc.com>
This is the initial commit of the SiFive PWM timer. This is used by
guest software as a timer and is included in the SiFive FU540 SoC.
Signed-off-by: Justin Restivo <jrestivo@draper.com>
Signed-off-by: Alexandra Clifford <aclifford@draper.com>
Signed-off-by: Amanda Strnad <astrnad@draper.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 9f70a210acbfaf0e1ea6ad311ab892ac69134d8b.1631159656.git.alistair.francis@wdc.com
---
include/hw/timer/sifive_pwm.h | 62 +++++
hw/timer/sifive_pwm.c | 468 ++++++++++++++++++++++++++++++++++
hw/timer/Kconfig | 3 +
hw/timer/meson.build | 1 +
hw/timer/trace-events | 6 +
5 files changed, 540 insertions(+)
create mode 100644 include/hw/timer/sifive_pwm.h
create mode 100644 hw/timer/sifive_pwm.c
diff --git a/include/hw/timer/sifive_pwm.h b/include/hw/timer/sifive_pwm.h
new file mode 100644
index 0000000000..6a8cf7b29e
--- /dev/null
+++ b/include/hw/timer/sifive_pwm.h
@@ -0,0 +1,62 @@
+/*
+ * SiFive PWM
+ *
+ * Copyright (c) 2020 Western Digital
+ *
+ * Author: Alistair Francis <alistair.francis@wdc.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef HW_SIFIVE_PWM_H
+#define HW_SIFIVE_PWM_H
+
+#include "hw/sysbus.h"
+#include "qemu/timer.h"
+#include "qom/object.h"
+
+#define TYPE_SIFIVE_PWM "sifive-pwm"
+
+#define SIFIVE_PWM(obj) \
+ OBJECT_CHECK(SiFivePwmState, (obj), TYPE_SIFIVE_PWM)
+
+#define SIFIVE_PWM_CHANS 4
+#define SIFIVE_PWM_IRQS SIFIVE_PWM_CHANS
+
+typedef struct SiFivePwmState {
+ /* <private> */
+ SysBusDevice parent_obj;
+
+ /* <public> */
+ MemoryRegion mmio;
+ QEMUTimer timer[SIFIVE_PWM_CHANS];
+ /*
+ * if en bit(s) set, is the number of ticks when pwmcount was 0
+ * if en bit(s) not set, is the number of ticks in pwmcount
+ */
+ uint64_t tick_offset;
+ uint64_t freq_hz;
+
+ uint32_t pwmcfg;
+ uint32_t pwmcmp[SIFIVE_PWM_CHANS];
+
+ qemu_irq irqs[SIFIVE_PWM_IRQS];
+} SiFivePwmState;
+
+#endif /* HW_SIFIVE_PWM_H */
diff --git a/hw/timer/sifive_pwm.c b/hw/timer/sifive_pwm.c
new file mode 100644
index 0000000000..c664480ccf
--- /dev/null
+++ b/hw/timer/sifive_pwm.c
@@ -0,0 +1,468 @@
+/*
+ * SiFive PWM
+ *
+ * Copyright (c) 2020 Western Digital
+ *
+ * Author: Alistair Francis <alistair.francis@wdc.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "trace.h"
+#include "hw/irq.h"
+#include "hw/timer/sifive_pwm.h"
+#include "hw/qdev-properties.h"
+#include "hw/registerfields.h"
+#include "migration/vmstate.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+
+#define HAS_PWM_EN_BITS(cfg) ((cfg & R_CONFIG_ENONESHOT_MASK) || \
+ (cfg & R_CONFIG_ENALWAYS_MASK))
+
+#define PWMCMP_MASK 0xFFFF
+#define PWMCOUNT_MASK 0x7FFFFFFF
+
+REG32(CONFIG, 0x00)
+ FIELD(CONFIG, SCALE, 0, 4)
+ FIELD(CONFIG, STICKY, 8, 1)
+ FIELD(CONFIG, ZEROCMP, 9, 1)
+ FIELD(CONFIG, DEGLITCH, 10, 1)
+ FIELD(CONFIG, ENALWAYS, 12, 1)
+ FIELD(CONFIG, ENONESHOT, 13, 1)
+ FIELD(CONFIG, CMP0CENTER, 16, 1)
+ FIELD(CONFIG, CMP1CENTER, 17, 1)
+ FIELD(CONFIG, CMP2CENTER, 18, 1)
+ FIELD(CONFIG, CMP3CENTER, 19, 1)
+ FIELD(CONFIG, CMP0GANG, 24, 1)
+ FIELD(CONFIG, CMP1GANG, 25, 1)
+ FIELD(CONFIG, CMP2GANG, 26, 1)
+ FIELD(CONFIG, CMP3GANG, 27, 1)
+ FIELD(CONFIG, CMP0IP, 28, 1)
+ FIELD(CONFIG, CMP1IP, 29, 1)
+ FIELD(CONFIG, CMP2IP, 30, 1)
+ FIELD(CONFIG, CMP3IP, 31, 1)
+REG32(COUNT, 0x08)
+REG32(PWMS, 0x10)
+REG32(PWMCMP0, 0x20)
+REG32(PWMCMP1, 0x24)
+REG32(PWMCMP2, 0x28)
+REG32(PWMCMP3, 0x2C)
+
+static inline uint64_t sifive_pwm_ns_to_ticks(SiFivePwmState *s,
+ uint64_t time)
+{
+ return muldiv64(time, s->freq_hz, NANOSECONDS_PER_SECOND);
+}
+
+static inline uint64_t sifive_pwm_ticks_to_ns(SiFivePwmState *s,
+ uint64_t ticks)
+{
+ return muldiv64(ticks, NANOSECONDS_PER_SECOND, s->freq_hz);
+}
+
+static inline uint64_t sifive_pwm_compute_scale(SiFivePwmState *s)
+{
+ return s->pwmcfg & R_CONFIG_SCALE_MASK;
+}
+
+static void sifive_pwm_set_alarms(SiFivePwmState *s)
+{
+ uint64_t now_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+
+ if (HAS_PWM_EN_BITS(s->pwmcfg)) {
+ /*
+ * Subtract ticks from number of ticks when the timer was zero
+ * and mask to the register width.
+ */
+ uint64_t pwmcount = (sifive_pwm_ns_to_ticks(s, now_ns) -
+ s->tick_offset) & PWMCOUNT_MASK;
+ uint64_t scale = sifive_pwm_compute_scale(s);
+ /* PWMs only contains PWMCMP_MASK bits starting at scale */
+ uint64_t pwms = (pwmcount & (PWMCMP_MASK << scale)) >> scale;
+
+ for (int i = 0; i < SIFIVE_PWM_CHANS; i++) {
+ uint64_t pwmcmp = s->pwmcmp[i] & PWMCMP_MASK;
+ uint64_t pwmcmp_ticks = pwmcmp << scale;
+
+ /*
+ * Per circuit diagram and spec, both cases raises corresponding
+ * IP bit one clock cycle after time expires.
+ */
+ if (pwmcmp > pwms) {
+ uint64_t offset = pwmcmp_ticks - pwmcount + 1;
+ uint64_t when_to_fire = now_ns +
+ sifive_pwm_ticks_to_ns(s, offset);
+
+ trace_sifive_pwm_set_alarm(when_to_fire, now_ns);
+ timer_mod(&s->timer[i], when_to_fire);
+ } else {
+ /* Schedule interrupt for next cycle */
+ trace_sifive_pwm_set_alarm(now_ns + 1, now_ns);
+ timer_mod(&s->timer[i], now_ns + 1);
+ }
+
+ }
+ } else {
+ /*
+ * If timer incrementing disabled, just do pwms > pwmcmp check since
+ * a write may have happened to PWMs.
+ */
+ uint64_t pwmcount = (s->tick_offset) & PWMCOUNT_MASK;
+ uint64_t scale = sifive_pwm_compute_scale(s);
+ uint64_t pwms = (pwmcount & (PWMCMP_MASK << scale)) >> scale;
+
+ for (int i = 0; i < SIFIVE_PWM_CHANS; i++) {
+ uint64_t pwmcmp = s->pwmcmp[i] & PWMCMP_MASK;
+
+ if (pwms >= pwmcmp) {
+ trace_sifive_pwm_set_alarm(now_ns + 1, now_ns);
+ timer_mod(&s->timer[i], now_ns + 1);
+ } else {
+ /* Effectively disable timer by scheduling far in future. */
+ trace_sifive_pwm_set_alarm(0xFFFFFFFFFFFFFF, now_ns);
+ timer_mod(&s->timer[i], 0xFFFFFFFFFFFFFF);
+ }
+ }
+ }
+}
+
+static void sifive_pwm_interrupt(SiFivePwmState *s, int num)
+{
+ uint64_t now = sifive_pwm_ns_to_ticks(s,
+ qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL));
+ bool was_incrementing = HAS_PWM_EN_BITS(s->pwmcfg);
+
+ trace_sifive_pwm_interrupt(num);
+
+ s->pwmcfg |= R_CONFIG_CMP0IP_MASK << num;
+ qemu_irq_raise(s->irqs[num]);
+
+ /*
+ * If the zerocmp is set and pwmcmp0 raised the interrupt
+ * reset the zero ticks.
+ */
+ if ((s->pwmcfg & R_CONFIG_ZEROCMP_MASK) && (num == 0)) {
+ /* If reset signal conditions, disable ENONESHOT. */
+ s->pwmcfg &= ~R_CONFIG_ENONESHOT_MASK;
+
+ if (was_incrementing) {
+ /* If incrementing, time in ticks is when pwmcount is zero */
+ s->tick_offset = now;
+ } else {
+ /* If not incrementing, pwmcount = 0 */
+ s->tick_offset = 0;
+ }
+ }
+
+ /*
+ * If carryout bit set, which we discern via looking for overflow,
+ * also reset ENONESHOT.
+ */
+ if (was_incrementing &&
+ ((now & PWMCOUNT_MASK) < (s->tick_offset & PWMCOUNT_MASK))) {
+ s->pwmcfg &= ~R_CONFIG_ENONESHOT_MASK;
+ }
+
+ /* Schedule or disable interrupts */
+ sifive_pwm_set_alarms(s);
+
+ /* If was enabled, and now not enabled, switch tick rep */
+ if (was_incrementing && !HAS_PWM_EN_BITS(s->pwmcfg)) {
+ s->tick_offset = (now - s->tick_offset) & PWMCOUNT_MASK;
+ }
+}
+
+static void sifive_pwm_interrupt_0(void *opaque)
+{
+ SiFivePwmState *s = opaque;
+
+ sifive_pwm_interrupt(s, 0);
+}
+
+static void sifive_pwm_interrupt_1(void *opaque)
+{
+ SiFivePwmState *s = opaque;
+
+ sifive_pwm_interrupt(s, 1);
+}
+
+static void sifive_pwm_interrupt_2(void *opaque)
+{
+ SiFivePwmState *s = opaque;
+
+ sifive_pwm_interrupt(s, 2);
+}
+
+static void sifive_pwm_interrupt_3(void *opaque)
+{
+ SiFivePwmState *s = opaque;
+
+ sifive_pwm_interrupt(s, 3);
+}
+
+static uint64_t sifive_pwm_read(void *opaque, hwaddr addr,
+ unsigned int size)
+{
+ SiFivePwmState *s = opaque;
+ uint64_t cur_time, scale;
+ uint64_t now = sifive_pwm_ns_to_ticks(s,
+ qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL));
+
+ trace_sifive_pwm_read(addr);
+
+ switch (addr) {
+ case A_CONFIG:
+ return s->pwmcfg;
+ case A_COUNT:
+ cur_time = s->tick_offset;
+
+ if (HAS_PWM_EN_BITS(s->pwmcfg)) {
+ cur_time = now - cur_time;
+ }
+
+ /*
+ * Return the value in the counter with bit 31 always 0
+ * This is allowed to wrap around so we don't need to check that.
+ */
+ return cur_time & PWMCOUNT_MASK;
+ case A_PWMS:
+ cur_time = s->tick_offset;
+ scale = sifive_pwm_compute_scale(s);
+
+ if (HAS_PWM_EN_BITS(s->pwmcfg)) {
+ cur_time = now - cur_time;
+ }
+
+ return ((cur_time & PWMCOUNT_MASK) >> scale) & PWMCMP_MASK;
+ case A_PWMCMP0:
+ return s->pwmcmp[0] & PWMCMP_MASK;
+ case A_PWMCMP1:
+ return s->pwmcmp[1] & PWMCMP_MASK;
+ case A_PWMCMP2:
+ return s->pwmcmp[2] & PWMCMP_MASK;
+ case A_PWMCMP3:
+ return s->pwmcmp[3] & PWMCMP_MASK;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr);
+ return 0;
+ }
+
+ return 0;
+}
+
+static void sifive_pwm_write(void *opaque, hwaddr addr,
+ uint64_t val64, unsigned int size)
+{
+ SiFivePwmState *s = opaque;
+ uint32_t value = val64;
+ uint64_t new_offset, scale;
+ uint64_t now = sifive_pwm_ns_to_ticks(s,
+ qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL));
+
+ trace_sifive_pwm_write(value, addr);
+
+ switch (addr) {
+ case A_CONFIG:
+ if (value & (R_CONFIG_CMP0CENTER_MASK | R_CONFIG_CMP1CENTER_MASK |
+ R_CONFIG_CMP2CENTER_MASK | R_CONFIG_CMP3CENTER_MASK)) {
+ qemu_log_mask(LOG_UNIMP, "%s: CMPxCENTER is not supported\n",
+ __func__);
+ }
+
+ if (value & (R_CONFIG_CMP0GANG_MASK | R_CONFIG_CMP1GANG_MASK |
+ R_CONFIG_CMP2GANG_MASK | R_CONFIG_CMP3GANG_MASK)) {
+ qemu_log_mask(LOG_UNIMP, "%s: CMPxGANG is not supported\n",
+ __func__);
+ }
+
+ if (value & (R_CONFIG_CMP0IP_MASK | R_CONFIG_CMP1IP_MASK |
+ R_CONFIG_CMP2IP_MASK | R_CONFIG_CMP3IP_MASK)) {
+ qemu_log_mask(LOG_UNIMP, "%s: CMPxIP is not supported\n",
+ __func__);
+ }
+
+ if (!(value & R_CONFIG_CMP0IP_MASK)) {
+ qemu_irq_lower(s->irqs[0]);
+ }
+
+ if (!(value & R_CONFIG_CMP1IP_MASK)) {
+ qemu_irq_lower(s->irqs[1]);
+ }
+
+ if (!(value & R_CONFIG_CMP2IP_MASK)) {
+ qemu_irq_lower(s->irqs[2]);
+ }
+
+ if (!(value & R_CONFIG_CMP3IP_MASK)) {
+ qemu_irq_lower(s->irqs[3]);
+ }
+
+ /*
+ * If this write enables the timer increment
+ * set the time when pwmcount was zero to be cur_time - pwmcount.
+ * If this write disables the timer increment
+ * convert back from pwmcount to the time in ticks
+ * when pwmcount was zero.
+ */
+ if ((!HAS_PWM_EN_BITS(s->pwmcfg) && HAS_PWM_EN_BITS(value)) ||
+ (HAS_PWM_EN_BITS(s->pwmcfg) && !HAS_PWM_EN_BITS(value))) {
+ s->tick_offset = (now - s->tick_offset) & PWMCOUNT_MASK;
+ }
+
+ s->pwmcfg = value;
+ break;
+ case A_COUNT:
+ /* The guest changed the counter, updated the offset value. */
+ new_offset = value;
+
+ if (HAS_PWM_EN_BITS(s->pwmcfg)) {
+ new_offset = now - new_offset;
+ }
+
+ s->tick_offset = new_offset;
+ break;
+ case A_PWMS:
+ scale = sifive_pwm_compute_scale(s);
+ new_offset = (((value & PWMCMP_MASK) << scale) & PWMCOUNT_MASK);
+
+ if (HAS_PWM_EN_BITS(s->pwmcfg)) {
+ new_offset = now - new_offset;
+ }
+
+ s->tick_offset = new_offset;
+ break;
+ case A_PWMCMP0:
+ s->pwmcmp[0] = value & PWMCMP_MASK;
+ break;
+ case A_PWMCMP1:
+ s->pwmcmp[1] = value & PWMCMP_MASK;
+ break;
+ case A_PWMCMP2:
+ s->pwmcmp[2] = value & PWMCMP_MASK;
+ break;
+ case A_PWMCMP3:
+ s->pwmcmp[3] = value & PWMCMP_MASK;
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr);
+ }
+
+ /* Update the alarms to reflect possible updated values */
+ sifive_pwm_set_alarms(s);
+}
+
+static void sifive_pwm_reset(DeviceState *dev)
+{
+ SiFivePwmState *s = SIFIVE_PWM(dev);
+ uint64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+
+ s->pwmcfg = 0x00000000;
+ s->pwmcmp[0] = 0x00000000;
+ s->pwmcmp[1] = 0x00000000;
+ s->pwmcmp[2] = 0x00000000;
+ s->pwmcmp[3] = 0x00000000;
+
+ s->tick_offset = sifive_pwm_ns_to_ticks(s, now);
+}
+
+static const MemoryRegionOps sifive_pwm_ops = {
+ .read = sifive_pwm_read,
+ .write = sifive_pwm_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static const VMStateDescription vmstate_sifive_pwm = {
+ .name = TYPE_SIFIVE_PWM,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_TIMER_ARRAY(timer, SiFivePwmState, 4),
+ VMSTATE_UINT64(tick_offset, SiFivePwmState),
+ VMSTATE_UINT32(pwmcfg, SiFivePwmState),
+ VMSTATE_UINT32_ARRAY(pwmcmp, SiFivePwmState, 4),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static Property sifive_pwm_properties[] = {
+ /* 0.5Ghz per spec after FSBL */
+ DEFINE_PROP_UINT64("clock-frequency", struct SiFivePwmState,
+ freq_hz, 500000000ULL),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void sifive_pwm_init(Object *obj)
+{
+ SiFivePwmState *s = SIFIVE_PWM(obj);
+ int i;
+
+ for (i = 0; i < SIFIVE_PWM_IRQS; i++) {
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irqs[i]);
+ }
+
+ memory_region_init_io(&s->mmio, obj, &sifive_pwm_ops, s,
+ TYPE_SIFIVE_PWM, 0x100);
+ sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
+}
+
+static void sifive_pwm_realize(DeviceState *dev, Error **errp)
+{
+ SiFivePwmState *s = SIFIVE_PWM(dev);
+
+ timer_init_ns(&s->timer[0], QEMU_CLOCK_VIRTUAL,
+ sifive_pwm_interrupt_0, s);
+
+ timer_init_ns(&s->timer[1], QEMU_CLOCK_VIRTUAL,
+ sifive_pwm_interrupt_1, s);
+
+ timer_init_ns(&s->timer[2], QEMU_CLOCK_VIRTUAL,
+ sifive_pwm_interrupt_2, s);
+
+ timer_init_ns(&s->timer[3], QEMU_CLOCK_VIRTUAL,
+ sifive_pwm_interrupt_3, s);
+}
+
+static void sifive_pwm_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->reset = sifive_pwm_reset;
+ device_class_set_props(dc, sifive_pwm_properties);
+ dc->vmsd = &vmstate_sifive_pwm;
+ dc->realize = sifive_pwm_realize;
+}
+
+static const TypeInfo sifive_pwm_info = {
+ .name = TYPE_SIFIVE_PWM,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(SiFivePwmState),
+ .instance_init = sifive_pwm_init,
+ .class_init = sifive_pwm_class_init,
+};
+
+static void sifive_pwm_register_types(void)
+{
+ type_register_static(&sifive_pwm_info);
+}
+
+type_init(sifive_pwm_register_types)
diff --git a/hw/timer/Kconfig b/hw/timer/Kconfig
index 1e73da7e12..010be7ed1f 100644
--- a/hw/timer/Kconfig
+++ b/hw/timer/Kconfig
@@ -25,6 +25,9 @@ config ALLWINNER_A10_PIT
bool
select PTIMER
+config SIFIVE_PWM
+ bool
+
config STM32F2XX_TIMER
bool
diff --git a/hw/timer/meson.build b/hw/timer/meson.build
index e67478a8f1..03092e2ceb 100644
--- a/hw/timer/meson.build
+++ b/hw/timer/meson.build
@@ -35,5 +35,6 @@ softmmu_ss.add(when: 'CONFIG_STELLARIS_GPTM', if_true: files('stellaris-gptm.c')
softmmu_ss.add(when: 'CONFIG_STM32F2XX_TIMER', if_true: files('stm32f2xx_timer.c'))
softmmu_ss.add(when: 'CONFIG_XILINX', if_true: files('xilinx_timer.c'))
specific_ss.add(when: 'CONFIG_IBEX', if_true: files('ibex_timer.c'))
+softmmu_ss.add(when: 'CONFIG_SIFIVE_PWM', if_true: files('sifive_pwm.c'))
specific_ss.add(when: 'CONFIG_AVR_TIMER16', if_true: files('avr_timer16.c'))
diff --git a/hw/timer/trace-events b/hw/timer/trace-events
index 5234c0ea9e..d0edcd2a80 100644
--- a/hw/timer/trace-events
+++ b/hw/timer/trace-events
@@ -88,3 +88,9 @@ sse_counter_reset(void) "SSE system counter: reset"
sse_timer_read(uint64_t offset, uint64_t data, unsigned size) "SSE system timer read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
sse_timer_write(uint64_t offset, uint64_t data, unsigned size) "SSE system timer write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
sse_timer_reset(void) "SSE system timer: reset"
+
+# sifive_pwm.c
+sifive_pwm_set_alarm(uint64_t alarm, uint64_t now) "Setting alarm to: 0x%" PRIx64 ", now: 0x%" PRIx64
+sifive_pwm_interrupt(int num) "Interrupt %d"
+sifive_pwm_read(uint64_t offset) "Read at address: 0x%" PRIx64
+sifive_pwm_write(uint64_t data, uint64_t offset) "Write 0x%" PRIx64 " at address: 0x%" PRIx64
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PULL v2 09/21] sifive_u: Connect the SiFive PWM device
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
` (7 preceding siblings ...)
2021-09-21 6:53 ` [PULL v2 08/21] hw/timer: Add SiFive PWM support Alistair Francis
@ 2021-09-21 6:54 ` Alistair Francis
2021-09-21 6:54 ` [PULL v2 10/21] hw/intc: Rename sifive_clint sources to riscv_aclint sources Alistair Francis
` (12 subsequent siblings)
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:54 UTC (permalink / raw)
To: qemu-devel, peter.maydell; +Cc: alistair23, Alistair Francis, Bin Meng
From: Alistair Francis <alistair.francis@wdc.com>
Connect the SiFive PWM device and expose it via the device tree.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 22f98648b4e012f78529a56f5ca60b0b27852a4d.1631159656.git.alistair.francis@wdc.com
---
docs/system/riscv/sifive_u.rst | 1 +
include/hw/riscv/sifive_u.h | 14 ++++++++-
hw/riscv/sifive_u.c | 55 +++++++++++++++++++++++++++++++++-
hw/riscv/Kconfig | 1 +
4 files changed, 69 insertions(+), 2 deletions(-)
diff --git a/docs/system/riscv/sifive_u.rst b/docs/system/riscv/sifive_u.rst
index 01108b5ecc..7c65e9c440 100644
--- a/docs/system/riscv/sifive_u.rst
+++ b/docs/system/riscv/sifive_u.rst
@@ -24,6 +24,7 @@ The ``sifive_u`` machine supports the following devices:
* 2 QSPI controllers
* 1 ISSI 25WP256 flash
* 1 SD card in SPI mode
+* PWM0 and PWM1
Please note the real world HiFive Unleashed board has a fixed configuration of
1 E51 core and 4 U54 core combination and the RISC-V core boots in 64-bit mode.
diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
index 2656b39808..f71c90c94c 100644
--- a/include/hw/riscv/sifive_u.h
+++ b/include/hw/riscv/sifive_u.h
@@ -27,6 +27,7 @@
#include "hw/misc/sifive_u_otp.h"
#include "hw/misc/sifive_u_prci.h"
#include "hw/ssi/sifive_spi.h"
+#include "hw/timer/sifive_pwm.h"
#define TYPE_RISCV_U_SOC "riscv.sifive.u.soc"
#define RISCV_U_SOC(obj) \
@@ -49,6 +50,7 @@ typedef struct SiFiveUSoCState {
SiFiveSPIState spi0;
SiFiveSPIState spi2;
CadenceGEMState gem;
+ SiFivePwmState pwm[2];
uint32_t serial;
char *cpu_type;
@@ -92,7 +94,9 @@ enum {
SIFIVE_U_DEV_FLASH0,
SIFIVE_U_DEV_DRAM,
SIFIVE_U_DEV_GEM,
- SIFIVE_U_DEV_GEM_MGMT
+ SIFIVE_U_DEV_GEM_MGMT,
+ SIFIVE_U_DEV_PWM0,
+ SIFIVE_U_DEV_PWM1
};
enum {
@@ -126,6 +130,14 @@ enum {
SIFIVE_U_PDMA_IRQ5 = 28,
SIFIVE_U_PDMA_IRQ6 = 29,
SIFIVE_U_PDMA_IRQ7 = 30,
+ SIFIVE_U_PWM0_IRQ0 = 42,
+ SIFIVE_U_PWM0_IRQ1 = 43,
+ SIFIVE_U_PWM0_IRQ2 = 44,
+ SIFIVE_U_PWM0_IRQ3 = 45,
+ SIFIVE_U_PWM1_IRQ0 = 46,
+ SIFIVE_U_PWM1_IRQ1 = 47,
+ SIFIVE_U_PWM1_IRQ2 = 48,
+ SIFIVE_U_PWM1_IRQ3 = 49,
SIFIVE_U_QSPI0_IRQ = 51,
SIFIVE_U_GEM_IRQ = 53
};
diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 6766edc1d0..f4cde10667 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -17,6 +17,7 @@
* 7) DMA (Direct Memory Access Controller)
* 8) SPI0 connected to an SPI flash
* 9) SPI2 connected to an SD card
+ * 10) PWM0 and PWM1
*
* This board currently generates devicetree dynamically that indicates at least
* two harts and up to five harts.
@@ -75,6 +76,8 @@ static const MemMapEntry sifive_u_memmap[] = {
[SIFIVE_U_DEV_PRCI] = { 0x10000000, 0x1000 },
[SIFIVE_U_DEV_UART0] = { 0x10010000, 0x1000 },
[SIFIVE_U_DEV_UART1] = { 0x10011000, 0x1000 },
+ [SIFIVE_U_DEV_PWM0] = { 0x10020000, 0x1000 },
+ [SIFIVE_U_DEV_PWM1] = { 0x10021000, 0x1000 },
[SIFIVE_U_DEV_QSPI0] = { 0x10040000, 0x1000 },
[SIFIVE_U_DEV_QSPI2] = { 0x10050000, 0x1000 },
[SIFIVE_U_DEV_GPIO] = { 0x10060000, 0x1000 },
@@ -441,6 +444,38 @@ static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap,
qemu_fdt_setprop_cell(fdt, nodename, "reg", 0x0);
g_free(nodename);
+ nodename = g_strdup_printf("/soc/pwm@%lx",
+ (long)memmap[SIFIVE_U_DEV_PWM0].base);
+ qemu_fdt_add_subnode(fdt, nodename);
+ qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,pwm0");
+ qemu_fdt_setprop_cells(fdt, nodename, "reg",
+ 0x0, memmap[SIFIVE_U_DEV_PWM0].base,
+ 0x0, memmap[SIFIVE_U_DEV_PWM0].size);
+ qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
+ qemu_fdt_setprop_cells(fdt, nodename, "interrupts",
+ SIFIVE_U_PWM0_IRQ0, SIFIVE_U_PWM0_IRQ1,
+ SIFIVE_U_PWM0_IRQ2, SIFIVE_U_PWM0_IRQ3);
+ qemu_fdt_setprop_cells(fdt, nodename, "clocks",
+ prci_phandle, PRCI_CLK_TLCLK);
+ qemu_fdt_setprop_cell(fdt, nodename, "#pwm-cells", 0);
+ g_free(nodename);
+
+ nodename = g_strdup_printf("/soc/pwm@%lx",
+ (long)memmap[SIFIVE_U_DEV_PWM1].base);
+ qemu_fdt_add_subnode(fdt, nodename);
+ qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,pwm0");
+ qemu_fdt_setprop_cells(fdt, nodename, "reg",
+ 0x0, memmap[SIFIVE_U_DEV_PWM1].base,
+ 0x0, memmap[SIFIVE_U_DEV_PWM1].size);
+ qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
+ qemu_fdt_setprop_cells(fdt, nodename, "interrupts",
+ SIFIVE_U_PWM1_IRQ0, SIFIVE_U_PWM1_IRQ1,
+ SIFIVE_U_PWM1_IRQ2, SIFIVE_U_PWM1_IRQ3);
+ qemu_fdt_setprop_cells(fdt, nodename, "clocks",
+ prci_phandle, PRCI_CLK_TLCLK);
+ qemu_fdt_setprop_cell(fdt, nodename, "#pwm-cells", 0);
+ g_free(nodename);
+
nodename = g_strdup_printf("/soc/serial@%lx",
(long)memmap[SIFIVE_U_DEV_UART1].base);
qemu_fdt_add_subnode(fdt, nodename);
@@ -765,6 +800,8 @@ static void sifive_u_soc_instance_init(Object *obj)
object_initialize_child(obj, "pdma", &s->dma, TYPE_SIFIVE_PDMA);
object_initialize_child(obj, "spi0", &s->spi0, TYPE_SIFIVE_SPI);
object_initialize_child(obj, "spi2", &s->spi2, TYPE_SIFIVE_SPI);
+ object_initialize_child(obj, "pwm0", &s->pwm[0], TYPE_SIFIVE_PWM);
+ object_initialize_child(obj, "pwm1", &s->pwm[1], TYPE_SIFIVE_PWM);
}
static void sifive_u_soc_realize(DeviceState *dev, Error **errp)
@@ -777,7 +814,7 @@ static void sifive_u_soc_realize(DeviceState *dev, Error **errp)
MemoryRegion *l2lim_mem = g_new(MemoryRegion, 1);
char *plic_hart_config;
size_t plic_hart_config_len;
- int i;
+ int i, j;
NICInfo *nd = &nd_table[0];
qdev_prop_set_uint32(DEVICE(&s->u_cpus), "num-harts", ms->smp.cpus - 1);
@@ -904,6 +941,22 @@ static void sifive_u_soc_realize(DeviceState *dev, Error **errp)
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gem), 0,
qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_GEM_IRQ));
+ /* PWM */
+ for (i = 0; i < 2; i++) {
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->pwm[i]), errp)) {
+ return;
+ }
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->pwm[i]), 0,
+ memmap[SIFIVE_U_DEV_PWM0].base + (0x1000 * i));
+
+ /* Connect PWM interrupts to the PLIC */
+ for (j = 0; j < SIFIVE_PWM_IRQS; j++) {
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->pwm[i]), j,
+ qdev_get_gpio_in(DEVICE(s->plic),
+ SIFIVE_U_PWM0_IRQ0 + (i * 4) + j));
+ }
+ }
+
create_unimplemented_device("riscv.sifive.u.gem-mgmt",
memmap[SIFIVE_U_DEV_GEM_MGMT].base, memmap[SIFIVE_U_DEV_GEM_MGMT].size);
diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
index ff75add6f3..d56c339ef6 100644
--- a/hw/riscv/Kconfig
+++ b/hw/riscv/Kconfig
@@ -69,6 +69,7 @@ config SIFIVE_U
select SIFIVE_UART
select SIFIVE_U_OTP
select SIFIVE_U_PRCI
+ select SIFIVE_PWM
select SSI_M25P80
select SSI_SD
select UNIMP
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PULL v2 10/21] hw/intc: Rename sifive_clint sources to riscv_aclint sources
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
` (8 preceding siblings ...)
2021-09-21 6:54 ` [PULL v2 09/21] sifive_u: Connect the SiFive PWM device Alistair Francis
@ 2021-09-21 6:54 ` Alistair Francis
2021-09-21 6:54 ` [PULL v2 11/21] hw/intc: Upgrade the SiFive CLINT implementation to RISC-V ACLINT Alistair Francis
` (11 subsequent siblings)
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:54 UTC (permalink / raw)
To: qemu-devel, peter.maydell
Cc: alistair23, Anup Patel, Alistair Francis, Bin Meng
From: Anup Patel <anup.patel@wdc.com>
We will be upgrading SiFive CLINT implementation into RISC-V ACLINT
implementation so let's first rename the sources.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210831110603.338681-2-anup.patel@wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
include/hw/intc/{sifive_clint.h => riscv_aclint.h} | 0
hw/intc/{sifive_clint.c => riscv_aclint.c} | 2 +-
hw/riscv/microchip_pfsoc.c | 2 +-
hw/riscv/shakti_c.c | 2 +-
hw/riscv/sifive_e.c | 2 +-
hw/riscv/sifive_u.c | 2 +-
hw/riscv/spike.c | 2 +-
hw/riscv/virt.c | 2 +-
hw/intc/Kconfig | 2 +-
hw/intc/meson.build | 2 +-
hw/riscv/Kconfig | 12 ++++++------
11 files changed, 15 insertions(+), 15 deletions(-)
rename include/hw/intc/{sifive_clint.h => riscv_aclint.h} (100%)
rename hw/intc/{sifive_clint.c => riscv_aclint.c} (99%)
diff --git a/include/hw/intc/sifive_clint.h b/include/hw/intc/riscv_aclint.h
similarity index 100%
rename from include/hw/intc/sifive_clint.h
rename to include/hw/intc/riscv_aclint.h
diff --git a/hw/intc/sifive_clint.c b/hw/intc/riscv_aclint.c
similarity index 99%
rename from hw/intc/sifive_clint.c
rename to hw/intc/riscv_aclint.c
index ab172d8e40..31ce990d0e 100644
--- a/hw/intc/sifive_clint.c
+++ b/hw/intc/riscv_aclint.c
@@ -26,7 +26,7 @@
#include "hw/sysbus.h"
#include "target/riscv/cpu.h"
#include "hw/qdev-properties.h"
-#include "hw/intc/sifive_clint.h"
+#include "hw/intc/riscv_aclint.h"
#include "qemu/timer.h"
#include "hw/irq.h"
diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c
index eef55f69fd..eed9e81355 100644
--- a/hw/riscv/microchip_pfsoc.c
+++ b/hw/riscv/microchip_pfsoc.c
@@ -49,7 +49,7 @@
#include "hw/riscv/boot.h"
#include "hw/riscv/riscv_hart.h"
#include "hw/riscv/microchip_pfsoc.h"
-#include "hw/intc/sifive_clint.h"
+#include "hw/intc/riscv_aclint.h"
#include "hw/intc/sifive_plic.h"
#include "sysemu/device_tree.h"
#include "sysemu/sysemu.h"
diff --git a/hw/riscv/shakti_c.c b/hw/riscv/shakti_c.c
index 09d4e1433e..f9f0a45651 100644
--- a/hw/riscv/shakti_c.c
+++ b/hw/riscv/shakti_c.c
@@ -21,7 +21,7 @@
#include "hw/riscv/shakti_c.h"
#include "qapi/error.h"
#include "hw/intc/sifive_plic.h"
-#include "hw/intc/sifive_clint.h"
+#include "hw/intc/riscv_aclint.h"
#include "sysemu/sysemu.h"
#include "hw/qdev-properties.h"
#include "exec/address-spaces.h"
diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c
index 04265c5640..a73848958e 100644
--- a/hw/riscv/sifive_e.c
+++ b/hw/riscv/sifive_e.c
@@ -41,7 +41,7 @@
#include "hw/riscv/sifive_e.h"
#include "hw/riscv/boot.h"
#include "hw/char/sifive_uart.h"
-#include "hw/intc/sifive_clint.h"
+#include "hw/intc/riscv_aclint.h"
#include "hw/intc/sifive_plic.h"
#include "hw/misc/sifive_e_prci.h"
#include "chardev/char.h"
diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index f4cde10667..aaab46c43c 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -52,7 +52,7 @@
#include "hw/riscv/sifive_u.h"
#include "hw/riscv/boot.h"
#include "hw/char/sifive_uart.h"
-#include "hw/intc/sifive_clint.h"
+#include "hw/intc/riscv_aclint.h"
#include "hw/intc/sifive_plic.h"
#include "chardev/char.h"
#include "net/eth.h"
diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c
index aae36f2cb4..690c19c12a 100644
--- a/hw/riscv/spike.c
+++ b/hw/riscv/spike.c
@@ -35,7 +35,7 @@
#include "hw/riscv/boot.h"
#include "hw/riscv/numa.h"
#include "hw/char/riscv_htif.h"
-#include "hw/intc/sifive_clint.h"
+#include "hw/intc/riscv_aclint.h"
#include "chardev/char.h"
#include "sysemu/device_tree.h"
#include "sysemu/sysemu.h"
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 47f1beb473..df33fd74c2 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -32,7 +32,7 @@
#include "hw/riscv/virt.h"
#include "hw/riscv/boot.h"
#include "hw/riscv/numa.h"
-#include "hw/intc/sifive_clint.h"
+#include "hw/intc/riscv_aclint.h"
#include "hw/intc/sifive_plic.h"
#include "hw/misc/sifive_test.h"
#include "chardev/char.h"
diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig
index f4694088a4..78aed93c45 100644
--- a/hw/intc/Kconfig
+++ b/hw/intc/Kconfig
@@ -62,7 +62,7 @@ config RX_ICU
config LOONGSON_LIOINTC
bool
-config SIFIVE_CLINT
+config RISCV_ACLINT
bool
config SIFIVE_PLIC
diff --git a/hw/intc/meson.build b/hw/intc/meson.build
index 4dcfea6aa8..a1d00aa48d 100644
--- a/hw/intc/meson.build
+++ b/hw/intc/meson.build
@@ -47,7 +47,7 @@ specific_ss.add(when: 'CONFIG_RX_ICU', if_true: files('rx_icu.c'))
specific_ss.add(when: 'CONFIG_S390_FLIC', if_true: files('s390_flic.c'))
specific_ss.add(when: 'CONFIG_S390_FLIC_KVM', if_true: files('s390_flic_kvm.c'))
specific_ss.add(when: 'CONFIG_SH_INTC', if_true: files('sh_intc.c'))
-specific_ss.add(when: 'CONFIG_SIFIVE_CLINT', if_true: files('sifive_clint.c'))
+specific_ss.add(when: 'CONFIG_RISCV_ACLINT', if_true: files('riscv_aclint.c'))
specific_ss.add(when: 'CONFIG_SIFIVE_PLIC', if_true: files('sifive_plic.c'))
specific_ss.add(when: 'CONFIG_XICS', if_true: files('xics.c'))
specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_XICS'],
diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
index d56c339ef6..d2d869aaad 100644
--- a/hw/riscv/Kconfig
+++ b/hw/riscv/Kconfig
@@ -12,7 +12,7 @@ config MICROCHIP_PFSOC
select MCHP_PFSOC_MMUART
select MCHP_PFSOC_SYSREG
select MSI_NONBROKEN
- select SIFIVE_CLINT
+ select RISCV_ACLINT
select SIFIVE_PDMA
select SIFIVE_PLIC
select UNIMP
@@ -26,7 +26,7 @@ config SHAKTI_C
bool
select UNIMP
select SHAKTI_UART
- select SIFIVE_CLINT
+ select RISCV_ACLINT
select SIFIVE_PLIC
config RISCV_VIRT
@@ -41,7 +41,7 @@ config RISCV_VIRT
select PCI_EXPRESS_GENERIC_BRIDGE
select PFLASH_CFI01
select SERIAL
- select SIFIVE_CLINT
+ select RISCV_ACLINT
select SIFIVE_PLIC
select SIFIVE_TEST
select VIRTIO_MMIO
@@ -50,7 +50,7 @@ config RISCV_VIRT
config SIFIVE_E
bool
select MSI_NONBROKEN
- select SIFIVE_CLINT
+ select RISCV_ACLINT
select SIFIVE_GPIO
select SIFIVE_PLIC
select SIFIVE_UART
@@ -61,7 +61,7 @@ config SIFIVE_U
bool
select CADENCE
select MSI_NONBROKEN
- select SIFIVE_CLINT
+ select RISCV_ACLINT
select SIFIVE_GPIO
select SIFIVE_PDMA
select SIFIVE_PLIC
@@ -79,5 +79,5 @@ config SPIKE
select RISCV_NUMA
select HTIF
select MSI_NONBROKEN
- select SIFIVE_CLINT
+ select RISCV_ACLINT
select SIFIVE_PLIC
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PULL v2 11/21] hw/intc: Upgrade the SiFive CLINT implementation to RISC-V ACLINT
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
` (9 preceding siblings ...)
2021-09-21 6:54 ` [PULL v2 10/21] hw/intc: Rename sifive_clint sources to riscv_aclint sources Alistair Francis
@ 2021-09-21 6:54 ` Alistair Francis
2021-09-21 6:54 ` [PULL v2 12/21] hw/riscv: virt: Re-factor FDT generation Alistair Francis
` (10 subsequent siblings)
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:54 UTC (permalink / raw)
To: qemu-devel, peter.maydell
Cc: alistair23, Anup Patel, Alistair Francis, Bin Meng
From: Anup Patel <anup.patel@wdc.com>
The RISC-V ACLINT is more modular and backward compatible with
original SiFive CLINT so instead of duplicating the original
SiFive CLINT implementation we upgrade the current SiFive CLINT
implementation to RISC-V ACLINT implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210831110603.338681-3-anup.patel@wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
include/hw/intc/riscv_aclint.h | 54 +++--
hw/intc/riscv_aclint.c | 373 +++++++++++++++++++++++----------
hw/riscv/microchip_pfsoc.c | 9 +-
hw/riscv/shakti_c.c | 11 +-
hw/riscv/sifive_e.c | 11 +-
hw/riscv/sifive_u.c | 9 +-
hw/riscv/spike.c | 14 +-
hw/riscv/virt.c | 14 +-
8 files changed, 339 insertions(+), 156 deletions(-)
diff --git a/include/hw/intc/riscv_aclint.h b/include/hw/intc/riscv_aclint.h
index 921b1561dd..229bd08d25 100644
--- a/include/hw/intc/riscv_aclint.h
+++ b/include/hw/intc/riscv_aclint.h
@@ -1,8 +1,9 @@
/*
- * SiFive CLINT (Core Local Interruptor) interface
+ * RISC-V ACLINT (Advanced Core Local Interruptor) interface
*
* Copyright (c) 2016-2017 Sagar Karandikar, sagark@eecs.berkeley.edu
* Copyright (c) 2017 SiFive, Inc.
+ * Copyright (c) 2021 Western Digital Corporation or its affiliates.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -17,17 +18,17 @@
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef HW_SIFIVE_CLINT_H
-#define HW_SIFIVE_CLINT_H
+#ifndef HW_RISCV_ACLINT_H
+#define HW_RISCV_ACLINT_H
#include "hw/sysbus.h"
-#define TYPE_SIFIVE_CLINT "riscv.sifive.clint"
+#define TYPE_RISCV_ACLINT_MTIMER "riscv.aclint.mtimer"
-#define SIFIVE_CLINT(obj) \
- OBJECT_CHECK(SiFiveCLINTState, (obj), TYPE_SIFIVE_CLINT)
+#define RISCV_ACLINT_MTIMER(obj) \
+ OBJECT_CHECK(RISCVAclintMTimerState, (obj), TYPE_RISCV_ACLINT_MTIMER)
-typedef struct SiFiveCLINTState {
+typedef struct RISCVAclintMTimerState {
/*< private >*/
SysBusDevice parent_obj;
@@ -35,28 +36,45 @@ typedef struct SiFiveCLINTState {
MemoryRegion mmio;
uint32_t hartid_base;
uint32_t num_harts;
- uint32_t sip_base;
uint32_t timecmp_base;
uint32_t time_base;
uint32_t aperture_size;
uint32_t timebase_freq;
qemu_irq *timer_irqs;
- qemu_irq *soft_irqs;
-} SiFiveCLINTState;
+} RISCVAclintMTimerState;
-DeviceState *sifive_clint_create(hwaddr addr, hwaddr size,
- uint32_t hartid_base, uint32_t num_harts, uint32_t sip_base,
+DeviceState *riscv_aclint_mtimer_create(hwaddr addr, hwaddr size,
+ uint32_t hartid_base, uint32_t num_harts,
uint32_t timecmp_base, uint32_t time_base, uint32_t timebase_freq,
bool provide_rdtime);
-enum {
- SIFIVE_SIP_BASE = 0x0,
- SIFIVE_TIMECMP_BASE = 0x4000,
- SIFIVE_TIME_BASE = 0xBFF8
-};
+#define TYPE_RISCV_ACLINT_SWI "riscv.aclint.swi"
+
+#define RISCV_ACLINT_SWI(obj) \
+ OBJECT_CHECK(RISCVAclintSwiState, (obj), TYPE_RISCV_ACLINT_SWI)
+
+typedef struct RISCVAclintSwiState {
+ /*< private >*/
+ SysBusDevice parent_obj;
+
+ /*< public >*/
+ MemoryRegion mmio;
+ uint32_t hartid_base;
+ uint32_t num_harts;
+ uint32_t sswi;
+ qemu_irq *soft_irqs;
+} RISCVAclintSwiState;
+
+DeviceState *riscv_aclint_swi_create(hwaddr addr, uint32_t hartid_base,
+ uint32_t num_harts, bool sswi);
enum {
- SIFIVE_CLINT_TIMEBASE_FREQ = 10000000
+ RISCV_ACLINT_DEFAULT_MTIMECMP = 0x0,
+ RISCV_ACLINT_DEFAULT_MTIME = 0x7ff8,
+ RISCV_ACLINT_DEFAULT_MTIMER_SIZE = 0x8000,
+ RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ = 10000000,
+ RISCV_ACLINT_MAX_HARTS = 4095,
+ RISCV_ACLINT_SWI_SIZE = 0x4000
};
#endif
diff --git a/hw/intc/riscv_aclint.c b/hw/intc/riscv_aclint.c
index 31ce990d0e..f1a5d3d284 100644
--- a/hw/intc/riscv_aclint.c
+++ b/hw/intc/riscv_aclint.c
@@ -1,8 +1,10 @@
/*
- * SiFive CLINT (Core Local Interruptor)
+ * RISC-V ACLINT (Advanced Core Local Interruptor)
+ * URL: https://github.com/riscv/riscv-aclint
*
* Copyright (c) 2016-2017 Sagar Karandikar, sagark@eecs.berkeley.edu
* Copyright (c) 2017 SiFive, Inc.
+ * Copyright (c) 2021 Western Digital Corporation or its affiliates.
*
* This provides real-time clock, timer and interprocessor interrupts.
*
@@ -22,6 +24,7 @@
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu/error-report.h"
+#include "qemu/log.h"
#include "qemu/module.h"
#include "hw/sysbus.h"
#include "target/riscv/cpu.h"
@@ -30,10 +33,10 @@
#include "qemu/timer.h"
#include "hw/irq.h"
-typedef struct sifive_clint_callback {
- SiFiveCLINTState *s;
+typedef struct riscv_aclint_mtimer_callback {
+ RISCVAclintMTimerState *s;
int num;
-} sifive_clint_callback;
+} riscv_aclint_mtimer_callback;
static uint64_t cpu_riscv_read_rtc(uint32_t timebase_freq)
{
@@ -45,10 +48,11 @@ static uint64_t cpu_riscv_read_rtc(uint32_t timebase_freq)
* Called when timecmp is written to update the QEMU timer or immediately
* trigger timer interrupt if mtimecmp <= current timer value.
*/
-static void sifive_clint_write_timecmp(SiFiveCLINTState *s, RISCVCPU *cpu,
- int hartid,
- uint64_t value,
- uint32_t timebase_freq)
+static void riscv_aclint_mtimer_write_timecmp(RISCVAclintMTimerState *mtimer,
+ RISCVCPU *cpu,
+ int hartid,
+ uint64_t value,
+ uint32_t timebase_freq)
{
uint64_t next;
uint64_t diff;
@@ -57,14 +61,16 @@ static void sifive_clint_write_timecmp(SiFiveCLINTState *s, RISCVCPU *cpu,
cpu->env.timecmp = value;
if (cpu->env.timecmp <= rtc_r) {
- /* if we're setting an MTIMECMP value in the "past",
- immediately raise the timer interrupt */
- qemu_irq_raise(s->timer_irqs[hartid - s->hartid_base]);
+ /*
+ * If we're setting an MTIMECMP value in the "past",
+ * immediately raise the timer interrupt
+ */
+ qemu_irq_raise(mtimer->timer_irqs[hartid - mtimer->hartid_base]);
return;
}
/* otherwise, set up the future timer interrupt */
- qemu_irq_lower(s->timer_irqs[hartid - s->hartid_base]);
+ qemu_irq_lower(mtimer->timer_irqs[hartid - mtimer->hartid_base]);
diff = cpu->env.timecmp - rtc_r;
/* back to ns (note args switched in muldiv64) */
uint64_t ns_diff = muldiv64(diff, NANOSECONDS_PER_SECOND, timebase_freq);
@@ -97,38 +103,28 @@ static void sifive_clint_write_timecmp(SiFiveCLINTState *s, RISCVCPU *cpu,
* Callback used when the timer set using timer_mod expires.
* Should raise the timer interrupt line
*/
-static void sifive_clint_timer_cb(void *opaque)
+static void riscv_aclint_mtimer_cb(void *opaque)
{
- sifive_clint_callback *state = opaque;
+ riscv_aclint_mtimer_callback *state = opaque;
qemu_irq_raise(state->s->timer_irqs[state->num]);
}
-/* CPU wants to read rtc or timecmp register */
-static uint64_t sifive_clint_read(void *opaque, hwaddr addr, unsigned size)
+/* CPU read MTIMER register */
+static uint64_t riscv_aclint_mtimer_read(void *opaque, hwaddr addr,
+ unsigned size)
{
- SiFiveCLINTState *clint = opaque;
- if (addr >= clint->sip_base &&
- addr < clint->sip_base + (clint->num_harts << 2)) {
- size_t hartid = clint->hartid_base + ((addr - clint->sip_base) >> 2);
- CPUState *cpu = qemu_get_cpu(hartid);
- CPURISCVState *env = cpu ? cpu->env_ptr : NULL;
- if (!env) {
- error_report("clint: invalid timecmp hartid: %zu", hartid);
- } else if ((addr & 0x3) == 0) {
- return (env->mip & MIP_MSIP) > 0;
- } else {
- error_report("clint: invalid read: %08x", (uint32_t)addr);
- return 0;
- }
- } else if (addr >= clint->timecmp_base &&
- addr < clint->timecmp_base + (clint->num_harts << 3)) {
- size_t hartid = clint->hartid_base +
- ((addr - clint->timecmp_base) >> 3);
+ RISCVAclintMTimerState *mtimer = opaque;
+
+ if (addr >= mtimer->timecmp_base &&
+ addr < (mtimer->timecmp_base + (mtimer->num_harts << 3))) {
+ size_t hartid = mtimer->hartid_base +
+ ((addr - mtimer->timecmp_base) >> 3);
CPUState *cpu = qemu_get_cpu(hartid);
CPURISCVState *env = cpu ? cpu->env_ptr : NULL;
if (!env) {
- error_report("clint: invalid timecmp hartid: %zu", hartid);
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "aclint-mtimer: invalid hartid: %zu", hartid);
} else if ((addr & 0x7) == 0) {
/* timecmp_lo */
uint64_t timecmp = env->timecmp;
@@ -138,79 +134,76 @@ static uint64_t sifive_clint_read(void *opaque, hwaddr addr, unsigned size)
uint64_t timecmp = env->timecmp;
return (timecmp >> 32) & 0xFFFFFFFF;
} else {
- error_report("clint: invalid read: %08x", (uint32_t)addr);
+ qemu_log_mask(LOG_UNIMP,
+ "aclint-mtimer: invalid read: %08x", (uint32_t)addr);
return 0;
}
- } else if (addr == clint->time_base) {
+ } else if (addr == mtimer->time_base) {
/* time_lo */
- return cpu_riscv_read_rtc(clint->timebase_freq) & 0xFFFFFFFF;
- } else if (addr == clint->time_base + 4) {
+ return cpu_riscv_read_rtc(mtimer->timebase_freq) & 0xFFFFFFFF;
+ } else if (addr == mtimer->time_base + 4) {
/* time_hi */
- return (cpu_riscv_read_rtc(clint->timebase_freq) >> 32) & 0xFFFFFFFF;
+ return (cpu_riscv_read_rtc(mtimer->timebase_freq) >> 32) & 0xFFFFFFFF;
}
- error_report("clint: invalid read: %08x", (uint32_t)addr);
+ qemu_log_mask(LOG_UNIMP,
+ "aclint-mtimer: invalid read: %08x", (uint32_t)addr);
return 0;
}
-/* CPU wrote to rtc or timecmp register */
-static void sifive_clint_write(void *opaque, hwaddr addr, uint64_t value,
- unsigned size)
+/* CPU write MTIMER register */
+static void riscv_aclint_mtimer_write(void *opaque, hwaddr addr,
+ uint64_t value, unsigned size)
{
- SiFiveCLINTState *clint = opaque;
+ RISCVAclintMTimerState *mtimer = opaque;
- if (addr >= clint->sip_base &&
- addr < clint->sip_base + (clint->num_harts << 2)) {
- size_t hartid = clint->hartid_base + ((addr - clint->sip_base) >> 2);
- CPUState *cpu = qemu_get_cpu(hartid);
- CPURISCVState *env = cpu ? cpu->env_ptr : NULL;
- if (!env) {
- error_report("clint: invalid timecmp hartid: %zu", hartid);
- } else if ((addr & 0x3) == 0) {
- qemu_set_irq(clint->soft_irqs[hartid - clint->hartid_base], value);
- } else {
- error_report("clint: invalid sip write: %08x", (uint32_t)addr);
- }
- return;
- } else if (addr >= clint->timecmp_base &&
- addr < clint->timecmp_base + (clint->num_harts << 3)) {
- size_t hartid = clint->hartid_base +
- ((addr - clint->timecmp_base) >> 3);
+ if (addr >= mtimer->timecmp_base &&
+ addr < (mtimer->timecmp_base + (mtimer->num_harts << 3))) {
+ size_t hartid = mtimer->hartid_base +
+ ((addr - mtimer->timecmp_base) >> 3);
CPUState *cpu = qemu_get_cpu(hartid);
CPURISCVState *env = cpu ? cpu->env_ptr : NULL;
if (!env) {
- error_report("clint: invalid timecmp hartid: %zu", hartid);
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "aclint-mtimer: invalid hartid: %zu", hartid);
} else if ((addr & 0x7) == 0) {
/* timecmp_lo */
uint64_t timecmp_hi = env->timecmp >> 32;
- sifive_clint_write_timecmp(clint, RISCV_CPU(cpu), hartid,
- timecmp_hi << 32 | (value & 0xFFFFFFFF), clint->timebase_freq);
+ riscv_aclint_mtimer_write_timecmp(mtimer, RISCV_CPU(cpu), hartid,
+ timecmp_hi << 32 | (value & 0xFFFFFFFF),
+ mtimer->timebase_freq);
return;
} else if ((addr & 0x7) == 4) {
/* timecmp_hi */
uint64_t timecmp_lo = env->timecmp;
- sifive_clint_write_timecmp(clint, RISCV_CPU(cpu), hartid,
- value << 32 | (timecmp_lo & 0xFFFFFFFF), clint->timebase_freq);
+ riscv_aclint_mtimer_write_timecmp(mtimer, RISCV_CPU(cpu), hartid,
+ value << 32 | (timecmp_lo & 0xFFFFFFFF),
+ mtimer->timebase_freq);
} else {
- error_report("clint: invalid timecmp write: %08x", (uint32_t)addr);
+ qemu_log_mask(LOG_UNIMP,
+ "aclint-mtimer: invalid timecmp write: %08x",
+ (uint32_t)addr);
}
return;
- } else if (addr == clint->time_base) {
+ } else if (addr == mtimer->time_base) {
/* time_lo */
- error_report("clint: time_lo write not implemented");
+ qemu_log_mask(LOG_UNIMP,
+ "aclint-mtimer: time_lo write not implemented");
return;
- } else if (addr == clint->time_base + 4) {
+ } else if (addr == mtimer->time_base + 4) {
/* time_hi */
- error_report("clint: time_hi write not implemented");
+ qemu_log_mask(LOG_UNIMP,
+ "aclint-mtimer: time_hi write not implemented");
return;
}
- error_report("clint: invalid write: %08x", (uint32_t)addr);
+ qemu_log_mask(LOG_UNIMP,
+ "aclint-mtimer: invalid write: %08x", (uint32_t)addr);
}
-static const MemoryRegionOps sifive_clint_ops = {
- .read = sifive_clint_read,
- .write = sifive_clint_write,
+static const MemoryRegionOps riscv_aclint_mtimer_ops = {
+ .read = riscv_aclint_mtimer_read,
+ .write = riscv_aclint_mtimer_write,
.endianness = DEVICE_LITTLE_ENDIAN,
.valid = {
.min_access_size = 4,
@@ -218,66 +211,75 @@ static const MemoryRegionOps sifive_clint_ops = {
}
};
-static Property sifive_clint_properties[] = {
- DEFINE_PROP_UINT32("hartid-base", SiFiveCLINTState, hartid_base, 0),
- DEFINE_PROP_UINT32("num-harts", SiFiveCLINTState, num_harts, 0),
- DEFINE_PROP_UINT32("sip-base", SiFiveCLINTState, sip_base, 0),
- DEFINE_PROP_UINT32("timecmp-base", SiFiveCLINTState, timecmp_base, 0),
- DEFINE_PROP_UINT32("time-base", SiFiveCLINTState, time_base, 0),
- DEFINE_PROP_UINT32("aperture-size", SiFiveCLINTState, aperture_size, 0),
- DEFINE_PROP_UINT32("timebase-freq", SiFiveCLINTState, timebase_freq, 0),
+static Property riscv_aclint_mtimer_properties[] = {
+ DEFINE_PROP_UINT32("hartid-base", RISCVAclintMTimerState,
+ hartid_base, 0),
+ DEFINE_PROP_UINT32("num-harts", RISCVAclintMTimerState, num_harts, 1),
+ DEFINE_PROP_UINT32("timecmp-base", RISCVAclintMTimerState,
+ timecmp_base, RISCV_ACLINT_DEFAULT_MTIMECMP),
+ DEFINE_PROP_UINT32("time-base", RISCVAclintMTimerState,
+ time_base, RISCV_ACLINT_DEFAULT_MTIME),
+ DEFINE_PROP_UINT32("aperture-size", RISCVAclintMTimerState,
+ aperture_size, RISCV_ACLINT_DEFAULT_MTIMER_SIZE),
+ DEFINE_PROP_UINT32("timebase-freq", RISCVAclintMTimerState,
+ timebase_freq, 0),
DEFINE_PROP_END_OF_LIST(),
};
-static void sifive_clint_realize(DeviceState *dev, Error **errp)
+static void riscv_aclint_mtimer_realize(DeviceState *dev, Error **errp)
{
- SiFiveCLINTState *s = SIFIVE_CLINT(dev);
- memory_region_init_io(&s->mmio, OBJECT(dev), &sifive_clint_ops, s,
- TYPE_SIFIVE_CLINT, s->aperture_size);
+ RISCVAclintMTimerState *s = RISCV_ACLINT_MTIMER(dev);
+ int i;
+
+ memory_region_init_io(&s->mmio, OBJECT(dev), &riscv_aclint_mtimer_ops,
+ s, TYPE_RISCV_ACLINT_MTIMER, s->aperture_size);
sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio);
s->timer_irqs = g_malloc(sizeof(qemu_irq) * s->num_harts);
qdev_init_gpio_out(dev, s->timer_irqs, s->num_harts);
- s->soft_irqs = g_malloc(sizeof(qemu_irq) * s->num_harts);
- qdev_init_gpio_out(dev, s->soft_irqs, s->num_harts);
+ /* Claim timer interrupt bits */
+ for (i = 0; i < s->num_harts; i++) {
+ RISCVCPU *cpu = RISCV_CPU(qemu_get_cpu(s->hartid_base + i));
+ if (riscv_cpu_claim_interrupts(cpu, MIP_MTIP) < 0) {
+ error_report("MTIP already claimed");
+ exit(1);
+ }
+ }
}
-static void sifive_clint_class_init(ObjectClass *klass, void *data)
+static void riscv_aclint_mtimer_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
- dc->realize = sifive_clint_realize;
- device_class_set_props(dc, sifive_clint_properties);
+ dc->realize = riscv_aclint_mtimer_realize;
+ device_class_set_props(dc, riscv_aclint_mtimer_properties);
}
-static const TypeInfo sifive_clint_info = {
- .name = TYPE_SIFIVE_CLINT,
+static const TypeInfo riscv_aclint_mtimer_info = {
+ .name = TYPE_RISCV_ACLINT_MTIMER,
.parent = TYPE_SYS_BUS_DEVICE,
- .instance_size = sizeof(SiFiveCLINTState),
- .class_init = sifive_clint_class_init,
+ .instance_size = sizeof(RISCVAclintMTimerState),
+ .class_init = riscv_aclint_mtimer_class_init,
};
-static void sifive_clint_register_types(void)
-{
- type_register_static(&sifive_clint_info);
-}
-
-type_init(sifive_clint_register_types)
-
/*
- * Create CLINT device.
+ * Create ACLINT MTIMER device.
*/
-DeviceState *sifive_clint_create(hwaddr addr, hwaddr size,
- uint32_t hartid_base, uint32_t num_harts, uint32_t sip_base,
+DeviceState *riscv_aclint_mtimer_create(hwaddr addr, hwaddr size,
+ uint32_t hartid_base, uint32_t num_harts,
uint32_t timecmp_base, uint32_t time_base, uint32_t timebase_freq,
bool provide_rdtime)
{
int i;
+ DeviceState *dev = qdev_new(TYPE_RISCV_ACLINT_MTIMER);
+
+ assert(num_harts <= RISCV_ACLINT_MAX_HARTS);
+ assert(!(addr & 0x7));
+ assert(!(timecmp_base & 0x7));
+ assert(!(time_base & 0x7));
- DeviceState *dev = qdev_new(TYPE_SIFIVE_CLINT);
qdev_prop_set_uint32(dev, "hartid-base", hartid_base);
qdev_prop_set_uint32(dev, "num-harts", num_harts);
- qdev_prop_set_uint32(dev, "sip-base", sip_base);
qdev_prop_set_uint32(dev, "timecmp-base", timecmp_base);
qdev_prop_set_uint32(dev, "time-base", time_base);
qdev_prop_set_uint32(dev, "aperture-size", size);
@@ -289,7 +291,8 @@ DeviceState *sifive_clint_create(hwaddr addr, hwaddr size,
CPUState *cpu = qemu_get_cpu(hartid_base + i);
RISCVCPU *rvcpu = RISCV_CPU(cpu);
CPURISCVState *env = cpu ? cpu->env_ptr : NULL;
- sifive_clint_callback *cb = g_malloc0(sizeof(sifive_clint_callback));
+ riscv_aclint_mtimer_callback *cb =
+ g_malloc0(sizeof(riscv_aclint_mtimer_callback));
if (!env) {
g_free(cb);
@@ -299,17 +302,159 @@ DeviceState *sifive_clint_create(hwaddr addr, hwaddr size,
riscv_cpu_set_rdtime_fn(env, cpu_riscv_read_rtc, timebase_freq);
}
- cb->s = SIFIVE_CLINT(dev);
+ cb->s = RISCV_ACLINT_MTIMER(dev);
cb->num = i;
env->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
- &sifive_clint_timer_cb, cb);
+ &riscv_aclint_mtimer_cb, cb);
env->timecmp = 0;
qdev_connect_gpio_out(dev, i,
qdev_get_gpio_in(DEVICE(rvcpu), IRQ_M_TIMER));
- qdev_connect_gpio_out(dev, num_harts + i,
- qdev_get_gpio_in(DEVICE(rvcpu), IRQ_M_SOFT));
}
return dev;
}
+
+/* CPU read [M|S]SWI register */
+static uint64_t riscv_aclint_swi_read(void *opaque, hwaddr addr,
+ unsigned size)
+{
+ RISCVAclintSwiState *swi = opaque;
+
+ if (addr < (swi->num_harts << 2)) {
+ size_t hartid = swi->hartid_base + (addr >> 2);
+ CPUState *cpu = qemu_get_cpu(hartid);
+ CPURISCVState *env = cpu ? cpu->env_ptr : NULL;
+ if (!env) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "aclint-swi: invalid hartid: %zu", hartid);
+ } else if ((addr & 0x3) == 0) {
+ return (swi->sswi) ? 0 : ((env->mip & MIP_MSIP) > 0);
+ }
+ }
+
+ qemu_log_mask(LOG_UNIMP,
+ "aclint-swi: invalid read: %08x", (uint32_t)addr);
+ return 0;
+}
+
+/* CPU write [M|S]SWI register */
+static void riscv_aclint_swi_write(void *opaque, hwaddr addr, uint64_t value,
+ unsigned size)
+{
+ RISCVAclintSwiState *swi = opaque;
+
+ if (addr < (swi->num_harts << 2)) {
+ size_t hartid = swi->hartid_base + (addr >> 2);
+ CPUState *cpu = qemu_get_cpu(hartid);
+ CPURISCVState *env = cpu ? cpu->env_ptr : NULL;
+ if (!env) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "aclint-swi: invalid hartid: %zu", hartid);
+ } else if ((addr & 0x3) == 0) {
+ if (value & 0x1) {
+ qemu_irq_raise(swi->soft_irqs[hartid - swi->hartid_base]);
+ } else {
+ if (!swi->sswi) {
+ qemu_irq_lower(swi->soft_irqs[hartid - swi->hartid_base]);
+ }
+ }
+ return;
+ }
+ }
+
+ qemu_log_mask(LOG_UNIMP,
+ "aclint-swi: invalid write: %08x", (uint32_t)addr);
+}
+
+static const MemoryRegionOps riscv_aclint_swi_ops = {
+ .read = riscv_aclint_swi_read,
+ .write = riscv_aclint_swi_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4
+ }
+};
+
+static Property riscv_aclint_swi_properties[] = {
+ DEFINE_PROP_UINT32("hartid-base", RISCVAclintSwiState, hartid_base, 0),
+ DEFINE_PROP_UINT32("num-harts", RISCVAclintSwiState, num_harts, 1),
+ DEFINE_PROP_UINT32("sswi", RISCVAclintSwiState, sswi, false),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void riscv_aclint_swi_realize(DeviceState *dev, Error **errp)
+{
+ RISCVAclintSwiState *swi = RISCV_ACLINT_SWI(dev);
+ int i;
+
+ memory_region_init_io(&swi->mmio, OBJECT(dev), &riscv_aclint_swi_ops, swi,
+ TYPE_RISCV_ACLINT_SWI, RISCV_ACLINT_SWI_SIZE);
+ sysbus_init_mmio(SYS_BUS_DEVICE(dev), &swi->mmio);
+
+ swi->soft_irqs = g_malloc(sizeof(qemu_irq) * swi->num_harts);
+ qdev_init_gpio_out(dev, swi->soft_irqs, swi->num_harts);
+
+ /* Claim software interrupt bits */
+ for (i = 0; i < swi->num_harts; i++) {
+ RISCVCPU *cpu = RISCV_CPU(qemu_get_cpu(swi->hartid_base + i));
+ /* We don't claim mip.SSIP because it is writeable by software */
+ if (riscv_cpu_claim_interrupts(cpu, swi->sswi ? 0 : MIP_MSIP) < 0) {
+ error_report("MSIP already claimed");
+ exit(1);
+ }
+ }
+}
+
+static void riscv_aclint_swi_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ dc->realize = riscv_aclint_swi_realize;
+ device_class_set_props(dc, riscv_aclint_swi_properties);
+}
+
+static const TypeInfo riscv_aclint_swi_info = {
+ .name = TYPE_RISCV_ACLINT_SWI,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(RISCVAclintSwiState),
+ .class_init = riscv_aclint_swi_class_init,
+};
+
+/*
+ * Create ACLINT [M|S]SWI device.
+ */
+DeviceState *riscv_aclint_swi_create(hwaddr addr, uint32_t hartid_base,
+ uint32_t num_harts, bool sswi)
+{
+ int i;
+ DeviceState *dev = qdev_new(TYPE_RISCV_ACLINT_SWI);
+
+ assert(num_harts <= RISCV_ACLINT_MAX_HARTS);
+ assert(!(addr & 0x3));
+
+ qdev_prop_set_uint32(dev, "hartid-base", hartid_base);
+ qdev_prop_set_uint32(dev, "num-harts", num_harts);
+ qdev_prop_set_uint32(dev, "sswi", sswi ? true : false);
+ sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
+ sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr);
+
+ for (i = 0; i < num_harts; i++) {
+ CPUState *cpu = qemu_get_cpu(hartid_base + i);
+ RISCVCPU *rvcpu = RISCV_CPU(cpu);
+
+ qdev_connect_gpio_out(dev, i,
+ qdev_get_gpio_in(DEVICE(rvcpu),
+ (sswi) ? IRQ_S_SOFT : IRQ_M_SOFT));
+ }
+
+ return dev;
+}
+
+static void riscv_aclint_register_types(void)
+{
+ type_register_static(&riscv_aclint_mtimer_info);
+ type_register_static(&riscv_aclint_swi_info);
+}
+
+type_init(riscv_aclint_register_types)
diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c
index eed9e81355..e475b6d511 100644
--- a/hw/riscv/microchip_pfsoc.c
+++ b/hw/riscv/microchip_pfsoc.c
@@ -234,9 +234,12 @@ static void microchip_pfsoc_soc_realize(DeviceState *dev, Error **errp)
memmap[MICROCHIP_PFSOC_BUSERR_UNIT4].size);
/* CLINT */
- sifive_clint_create(memmap[MICROCHIP_PFSOC_CLINT].base,
- memmap[MICROCHIP_PFSOC_CLINT].size, 0, ms->smp.cpus,
- SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE,
+ riscv_aclint_swi_create(memmap[MICROCHIP_PFSOC_CLINT].base,
+ 0, ms->smp.cpus, false);
+ riscv_aclint_mtimer_create(
+ memmap[MICROCHIP_PFSOC_CLINT].base + RISCV_ACLINT_SWI_SIZE,
+ RISCV_ACLINT_DEFAULT_MTIMER_SIZE, 0, ms->smp.cpus,
+ RISCV_ACLINT_DEFAULT_MTIMECMP, RISCV_ACLINT_DEFAULT_MTIME,
CLINT_TIMEBASE_FREQ, false);
/* L2 cache controller */
diff --git a/hw/riscv/shakti_c.c b/hw/riscv/shakti_c.c
index f9f0a45651..2f084d3c8d 100644
--- a/hw/riscv/shakti_c.c
+++ b/hw/riscv/shakti_c.c
@@ -124,10 +124,13 @@ static void shakti_c_soc_state_realize(DeviceState *dev, Error **errp)
SHAKTI_C_PLIC_CONTEXT_STRIDE,
shakti_c_memmap[SHAKTI_C_PLIC].size);
- sifive_clint_create(shakti_c_memmap[SHAKTI_C_CLINT].base,
- shakti_c_memmap[SHAKTI_C_CLINT].size, 0, 1,
- SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE,
- SIFIVE_CLINT_TIMEBASE_FREQ, false);
+ riscv_aclint_swi_create(shakti_c_memmap[SHAKTI_C_CLINT].base,
+ 0, 1, false);
+ riscv_aclint_mtimer_create(shakti_c_memmap[SHAKTI_C_CLINT].base +
+ RISCV_ACLINT_SWI_SIZE,
+ RISCV_ACLINT_DEFAULT_MTIMER_SIZE, 0, 1,
+ RISCV_ACLINT_DEFAULT_MTIMECMP, RISCV_ACLINT_DEFAULT_MTIME,
+ RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ, false);
qdev_prop_set_chr(DEVICE(&(sss->uart)), "chardev", serial_hd(0));
if (!sysbus_realize(SYS_BUS_DEVICE(&sss->uart), errp)) {
diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c
index a73848958e..6e95ea5896 100644
--- a/hw/riscv/sifive_e.c
+++ b/hw/riscv/sifive_e.c
@@ -207,10 +207,13 @@ static void sifive_e_soc_realize(DeviceState *dev, Error **errp)
SIFIVE_E_PLIC_CONTEXT_BASE,
SIFIVE_E_PLIC_CONTEXT_STRIDE,
memmap[SIFIVE_E_DEV_PLIC].size);
- sifive_clint_create(memmap[SIFIVE_E_DEV_CLINT].base,
- memmap[SIFIVE_E_DEV_CLINT].size, 0, ms->smp.cpus,
- SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE,
- SIFIVE_CLINT_TIMEBASE_FREQ, false);
+ riscv_aclint_swi_create(memmap[SIFIVE_E_DEV_CLINT].base,
+ 0, ms->smp.cpus, false);
+ riscv_aclint_mtimer_create(memmap[SIFIVE_E_DEV_CLINT].base +
+ RISCV_ACLINT_SWI_SIZE,
+ RISCV_ACLINT_DEFAULT_MTIMER_SIZE, 0, ms->smp.cpus,
+ RISCV_ACLINT_DEFAULT_MTIMECMP, RISCV_ACLINT_DEFAULT_MTIME,
+ RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ, false);
create_unimplemented_device("riscv.sifive.e.aon",
memmap[SIFIVE_E_DEV_AON].base, memmap[SIFIVE_E_DEV_AON].size);
sifive_e_prci_create(memmap[SIFIVE_E_DEV_PRCI].base);
diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index aaab46c43c..fc5790b8ce 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -884,9 +884,12 @@ static void sifive_u_soc_realize(DeviceState *dev, Error **errp)
serial_hd(0), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART0_IRQ));
sifive_uart_create(system_memory, memmap[SIFIVE_U_DEV_UART1].base,
serial_hd(1), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART1_IRQ));
- sifive_clint_create(memmap[SIFIVE_U_DEV_CLINT].base,
- memmap[SIFIVE_U_DEV_CLINT].size, 0, ms->smp.cpus,
- SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE,
+ riscv_aclint_swi_create(memmap[SIFIVE_U_DEV_CLINT].base, 0,
+ ms->smp.cpus, false);
+ riscv_aclint_mtimer_create(memmap[SIFIVE_U_DEV_CLINT].base +
+ RISCV_ACLINT_SWI_SIZE,
+ RISCV_ACLINT_DEFAULT_MTIMER_SIZE, 0, ms->smp.cpus,
+ RISCV_ACLINT_DEFAULT_MTIMECMP, RISCV_ACLINT_DEFAULT_MTIME,
CLINT_TIMEBASE_FREQ, false);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->prci), errp)) {
diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c
index 690c19c12a..79ae355ae2 100644
--- a/hw/riscv/spike.c
+++ b/hw/riscv/spike.c
@@ -84,7 +84,7 @@ static void create_fdt(SpikeState *s, const MemMapEntry *memmap,
qemu_fdt_add_subnode(fdt, "/cpus");
qemu_fdt_setprop_cell(fdt, "/cpus", "timebase-frequency",
- SIFIVE_CLINT_TIMEBASE_FREQ);
+ RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ);
qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0);
qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1);
qemu_fdt_add_subnode(fdt, "/cpus/cpu-map");
@@ -227,11 +227,15 @@ static void spike_board_init(MachineState *machine)
sysbus_realize(SYS_BUS_DEVICE(&s->soc[i]), &error_abort);
/* Core Local Interruptor (timer and IPI) for each socket */
- sifive_clint_create(
+ riscv_aclint_swi_create(
memmap[SPIKE_CLINT].base + i * memmap[SPIKE_CLINT].size,
- memmap[SPIKE_CLINT].size, base_hartid, hart_count,
- SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE,
- SIFIVE_CLINT_TIMEBASE_FREQ, false);
+ base_hartid, hart_count, false);
+ riscv_aclint_mtimer_create(
+ memmap[SPIKE_CLINT].base + i * memmap[SPIKE_CLINT].size +
+ RISCV_ACLINT_SWI_SIZE,
+ RISCV_ACLINT_DEFAULT_MTIMER_SIZE, base_hartid, hart_count,
+ RISCV_ACLINT_DEFAULT_MTIMECMP, RISCV_ACLINT_DEFAULT_MTIME,
+ RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ, false);
}
/* register system main memory (actual RAM) */
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index df33fd74c2..1cd7ac1546 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -228,7 +228,7 @@ static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap,
qemu_fdt_add_subnode(fdt, "/cpus");
qemu_fdt_setprop_cell(fdt, "/cpus", "timebase-frequency",
- SIFIVE_CLINT_TIMEBASE_FREQ);
+ RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ);
qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0);
qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1);
qemu_fdt_add_subnode(fdt, "/cpus/cpu-map");
@@ -613,11 +613,15 @@ static void virt_machine_init(MachineState *machine)
sysbus_realize(SYS_BUS_DEVICE(&s->soc[i]), &error_abort);
/* Per-socket CLINT */
- sifive_clint_create(
+ riscv_aclint_swi_create(
memmap[VIRT_CLINT].base + i * memmap[VIRT_CLINT].size,
- memmap[VIRT_CLINT].size, base_hartid, hart_count,
- SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE,
- SIFIVE_CLINT_TIMEBASE_FREQ, true);
+ base_hartid, hart_count, false);
+ riscv_aclint_mtimer_create(
+ memmap[VIRT_CLINT].base + i * memmap[VIRT_CLINT].size +
+ RISCV_ACLINT_SWI_SIZE,
+ RISCV_ACLINT_DEFAULT_MTIMER_SIZE, base_hartid, hart_count,
+ RISCV_ACLINT_DEFAULT_MTIMECMP, RISCV_ACLINT_DEFAULT_MTIME,
+ RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ, true);
/* Per-socket PLIC hart topology configuration string */
plic_hart_config = plic_hart_config_string(hart_count);
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PULL v2 12/21] hw/riscv: virt: Re-factor FDT generation
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
` (10 preceding siblings ...)
2021-09-21 6:54 ` [PULL v2 11/21] hw/intc: Upgrade the SiFive CLINT implementation to RISC-V ACLINT Alistair Francis
@ 2021-09-21 6:54 ` Alistair Francis
2021-09-21 6:54 ` [PULL v2 13/21] hw/riscv: virt: Add optional ACLINT support to virt machine Alistair Francis
` (9 subsequent siblings)
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:54 UTC (permalink / raw)
To: qemu-devel, peter.maydell
Cc: alistair23, Anup Patel, Alistair Francis, Bin Meng
From: Anup Patel <anup.patel@wdc.com>
We re-factor and break the FDT generation into smaller functions
so that it is easier to modify FDT generation for different
configurations of virt machine.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210831110603.338681-4-anup.patel@wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
hw/riscv/virt.c | 527 ++++++++++++++++++++++++++++++------------------
1 file changed, 327 insertions(+), 200 deletions(-)
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 1cd7ac1546..7f716901ef 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -176,214 +176,262 @@ static void create_pcie_irq_map(void *fdt, char *nodename,
0x1800, 0, 0, 0x7);
}
-static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap,
- uint64_t mem_size, const char *cmdline, bool is_32_bit)
+static void create_fdt_socket_cpus(RISCVVirtState *s, int socket,
+ char *clust_name, uint32_t *phandle,
+ bool is_32_bit, uint32_t *intc_phandles)
{
- void *fdt;
- int i, cpu, socket;
+ int cpu;
+ uint32_t cpu_phandle;
MachineState *mc = MACHINE(s);
+ char *name, *cpu_name, *core_name, *intc_name;
+
+ for (cpu = s->soc[socket].num_harts - 1; cpu >= 0; cpu--) {
+ cpu_phandle = (*phandle)++;
+
+ cpu_name = g_strdup_printf("/cpus/cpu@%d",
+ s->soc[socket].hartid_base + cpu);
+ qemu_fdt_add_subnode(mc->fdt, cpu_name);
+ qemu_fdt_setprop_string(mc->fdt, cpu_name, "mmu-type",
+ (is_32_bit) ? "riscv,sv32" : "riscv,sv48");
+ name = riscv_isa_string(&s->soc[socket].harts[cpu]);
+ qemu_fdt_setprop_string(mc->fdt, cpu_name, "riscv,isa", name);
+ g_free(name);
+ qemu_fdt_setprop_string(mc->fdt, cpu_name, "compatible", "riscv");
+ qemu_fdt_setprop_string(mc->fdt, cpu_name, "status", "okay");
+ qemu_fdt_setprop_cell(mc->fdt, cpu_name, "reg",
+ s->soc[socket].hartid_base + cpu);
+ qemu_fdt_setprop_string(mc->fdt, cpu_name, "device_type", "cpu");
+ riscv_socket_fdt_write_id(mc, mc->fdt, cpu_name, socket);
+ qemu_fdt_setprop_cell(mc->fdt, cpu_name, "phandle", cpu_phandle);
+
+ intc_phandles[cpu] = (*phandle)++;
+
+ intc_name = g_strdup_printf("%s/interrupt-controller", cpu_name);
+ qemu_fdt_add_subnode(mc->fdt, intc_name);
+ qemu_fdt_setprop_cell(mc->fdt, intc_name, "phandle",
+ intc_phandles[cpu]);
+ qemu_fdt_setprop_string(mc->fdt, intc_name, "compatible",
+ "riscv,cpu-intc");
+ qemu_fdt_setprop(mc->fdt, intc_name, "interrupt-controller", NULL, 0);
+ qemu_fdt_setprop_cell(mc->fdt, intc_name, "#interrupt-cells", 1);
+
+ core_name = g_strdup_printf("%s/core%d", clust_name, cpu);
+ qemu_fdt_add_subnode(mc->fdt, core_name);
+ qemu_fdt_setprop_cell(mc->fdt, core_name, "cpu", cpu_phandle);
+
+ g_free(core_name);
+ g_free(intc_name);
+ g_free(cpu_name);
+ }
+}
+
+static void create_fdt_socket_memory(RISCVVirtState *s,
+ const MemMapEntry *memmap, int socket)
+{
+ char *mem_name;
uint64_t addr, size;
- uint32_t *clint_cells, *plic_cells;
- unsigned long clint_addr, plic_addr;
- uint32_t plic_phandle[MAX_NODES];
- uint32_t cpu_phandle, intc_phandle, test_phandle;
- uint32_t phandle = 1, plic_mmio_phandle = 1;
- uint32_t plic_pcie_phandle = 1, plic_virtio_phandle = 1;
- char *mem_name, *cpu_name, *core_name, *intc_name;
- char *name, *clint_name, *plic_name, *clust_name;
- hwaddr flashsize = virt_memmap[VIRT_FLASH].size / 2;
- hwaddr flashbase = virt_memmap[VIRT_FLASH].base;
+ MachineState *mc = MACHINE(s);
+
+ addr = memmap[VIRT_DRAM].base + riscv_socket_mem_offset(mc, socket);
+ size = riscv_socket_mem_size(mc, socket);
+ mem_name = g_strdup_printf("/memory@%lx", (long)addr);
+ qemu_fdt_add_subnode(mc->fdt, mem_name);
+ qemu_fdt_setprop_cells(mc->fdt, mem_name, "reg",
+ addr >> 32, addr, size >> 32, size);
+ qemu_fdt_setprop_string(mc->fdt, mem_name, "device_type", "memory");
+ riscv_socket_fdt_write_id(mc, mc->fdt, mem_name, socket);
+ g_free(mem_name);
+}
+
+static void create_fdt_socket_clint(RISCVVirtState *s,
+ const MemMapEntry *memmap, int socket,
+ uint32_t *intc_phandles)
+{
+ int cpu;
+ char *clint_name;
+ uint32_t *clint_cells;
+ unsigned long clint_addr;
+ MachineState *mc = MACHINE(s);
static const char * const clint_compat[2] = {
"sifive,clint0", "riscv,clint0"
};
+
+ clint_cells = g_new0(uint32_t, s->soc[socket].num_harts * 4);
+
+ for (cpu = 0; cpu < s->soc[socket].num_harts; cpu++) {
+ clint_cells[cpu * 4 + 0] = cpu_to_be32(intc_phandles[cpu]);
+ clint_cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_SOFT);
+ clint_cells[cpu * 4 + 2] = cpu_to_be32(intc_phandles[cpu]);
+ clint_cells[cpu * 4 + 3] = cpu_to_be32(IRQ_M_TIMER);
+ }
+
+ clint_addr = memmap[VIRT_CLINT].base + (memmap[VIRT_CLINT].size * socket);
+ clint_name = g_strdup_printf("/soc/clint@%lx", clint_addr);
+ qemu_fdt_add_subnode(mc->fdt, clint_name);
+ qemu_fdt_setprop_string_array(mc->fdt, clint_name, "compatible",
+ (char **)&clint_compat,
+ ARRAY_SIZE(clint_compat));
+ qemu_fdt_setprop_cells(mc->fdt, clint_name, "reg",
+ 0x0, clint_addr, 0x0, memmap[VIRT_CLINT].size);
+ qemu_fdt_setprop(mc->fdt, clint_name, "interrupts-extended",
+ clint_cells, s->soc[socket].num_harts * sizeof(uint32_t) * 4);
+ riscv_socket_fdt_write_id(mc, mc->fdt, clint_name, socket);
+ g_free(clint_name);
+
+ g_free(clint_cells);
+}
+
+static void create_fdt_socket_plic(RISCVVirtState *s,
+ const MemMapEntry *memmap, int socket,
+ uint32_t *phandle, uint32_t *intc_phandles,
+ uint32_t *plic_phandles)
+{
+ int cpu;
+ char *plic_name;
+ uint32_t *plic_cells;
+ unsigned long plic_addr;
+ MachineState *mc = MACHINE(s);
static const char * const plic_compat[2] = {
"sifive,plic-1.0.0", "riscv,plic0"
};
- if (mc->dtb) {
- fdt = mc->fdt = load_device_tree(mc->dtb, &s->fdt_size);
- if (!fdt) {
- error_report("load_device_tree() failed");
- exit(1);
- }
- goto update_bootargs;
- } else {
- fdt = mc->fdt = create_device_tree(&s->fdt_size);
- if (!fdt) {
- error_report("create_device_tree() failed");
- exit(1);
- }
+ plic_cells = g_new0(uint32_t, s->soc[socket].num_harts * 4);
+
+ for (cpu = 0; cpu < s->soc[socket].num_harts; cpu++) {
+ plic_cells[cpu * 4 + 0] = cpu_to_be32(intc_phandles[cpu]);
+ plic_cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_EXT);
+ plic_cells[cpu * 4 + 2] = cpu_to_be32(intc_phandles[cpu]);
+ plic_cells[cpu * 4 + 3] = cpu_to_be32(IRQ_S_EXT);
}
- qemu_fdt_setprop_string(fdt, "/", "model", "riscv-virtio,qemu");
- qemu_fdt_setprop_string(fdt, "/", "compatible", "riscv-virtio");
- qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2);
- qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2);
+ plic_phandles[socket] = (*phandle)++;
+ plic_addr = memmap[VIRT_PLIC].base + (memmap[VIRT_PLIC].size * socket);
+ plic_name = g_strdup_printf("/soc/plic@%lx", plic_addr);
+ qemu_fdt_add_subnode(mc->fdt, plic_name);
+ qemu_fdt_setprop_cell(mc->fdt, plic_name,
+ "#address-cells", FDT_PLIC_ADDR_CELLS);
+ qemu_fdt_setprop_cell(mc->fdt, plic_name,
+ "#interrupt-cells", FDT_PLIC_INT_CELLS);
+ qemu_fdt_setprop_string_array(mc->fdt, plic_name, "compatible",
+ (char **)&plic_compat,
+ ARRAY_SIZE(plic_compat));
+ qemu_fdt_setprop(mc->fdt, plic_name, "interrupt-controller", NULL, 0);
+ qemu_fdt_setprop(mc->fdt, plic_name, "interrupts-extended",
+ plic_cells, s->soc[socket].num_harts * sizeof(uint32_t) * 4);
+ qemu_fdt_setprop_cells(mc->fdt, plic_name, "reg",
+ 0x0, plic_addr, 0x0, memmap[VIRT_PLIC].size);
+ qemu_fdt_setprop_cell(mc->fdt, plic_name, "riscv,ndev", VIRTIO_NDEV);
+ riscv_socket_fdt_write_id(mc, mc->fdt, plic_name, socket);
+ qemu_fdt_setprop_cell(mc->fdt, plic_name, "phandle",
+ plic_phandles[socket]);
+ g_free(plic_name);
+
+ g_free(plic_cells);
+}
- qemu_fdt_add_subnode(fdt, "/soc");
- qemu_fdt_setprop(fdt, "/soc", "ranges", NULL, 0);
- qemu_fdt_setprop_string(fdt, "/soc", "compatible", "simple-bus");
- qemu_fdt_setprop_cell(fdt, "/soc", "#size-cells", 0x2);
- qemu_fdt_setprop_cell(fdt, "/soc", "#address-cells", 0x2);
+static void create_fdt_sockets(RISCVVirtState *s, const MemMapEntry *memmap,
+ bool is_32_bit, uint32_t *phandle,
+ uint32_t *irq_mmio_phandle,
+ uint32_t *irq_pcie_phandle,
+ uint32_t *irq_virtio_phandle)
+{
+ int socket;
+ char *clust_name;
+ uint32_t *intc_phandles;
+ MachineState *mc = MACHINE(s);
+ uint32_t xplic_phandles[MAX_NODES];
- qemu_fdt_add_subnode(fdt, "/cpus");
- qemu_fdt_setprop_cell(fdt, "/cpus", "timebase-frequency",
+ qemu_fdt_add_subnode(mc->fdt, "/cpus");
+ qemu_fdt_setprop_cell(mc->fdt, "/cpus", "timebase-frequency",
RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ);
- qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0);
- qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1);
- qemu_fdt_add_subnode(fdt, "/cpus/cpu-map");
+ qemu_fdt_setprop_cell(mc->fdt, "/cpus", "#size-cells", 0x0);
+ qemu_fdt_setprop_cell(mc->fdt, "/cpus", "#address-cells", 0x1);
+ qemu_fdt_add_subnode(mc->fdt, "/cpus/cpu-map");
for (socket = (riscv_socket_count(mc) - 1); socket >= 0; socket--) {
clust_name = g_strdup_printf("/cpus/cpu-map/cluster%d", socket);
- qemu_fdt_add_subnode(fdt, clust_name);
-
- plic_cells = g_new0(uint32_t, s->soc[socket].num_harts * 4);
- clint_cells = g_new0(uint32_t, s->soc[socket].num_harts * 4);
-
- for (cpu = s->soc[socket].num_harts - 1; cpu >= 0; cpu--) {
- cpu_phandle = phandle++;
-
- cpu_name = g_strdup_printf("/cpus/cpu@%d",
- s->soc[socket].hartid_base + cpu);
- qemu_fdt_add_subnode(fdt, cpu_name);
- if (is_32_bit) {
- qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", "riscv,sv32");
- } else {
- qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", "riscv,sv48");
- }
- name = riscv_isa_string(&s->soc[socket].harts[cpu]);
- qemu_fdt_setprop_string(fdt, cpu_name, "riscv,isa", name);
- g_free(name);
- qemu_fdt_setprop_string(fdt, cpu_name, "compatible", "riscv");
- qemu_fdt_setprop_string(fdt, cpu_name, "status", "okay");
- qemu_fdt_setprop_cell(fdt, cpu_name, "reg",
- s->soc[socket].hartid_base + cpu);
- qemu_fdt_setprop_string(fdt, cpu_name, "device_type", "cpu");
- riscv_socket_fdt_write_id(mc, fdt, cpu_name, socket);
- qemu_fdt_setprop_cell(fdt, cpu_name, "phandle", cpu_phandle);
-
- intc_name = g_strdup_printf("%s/interrupt-controller", cpu_name);
- qemu_fdt_add_subnode(fdt, intc_name);
- intc_phandle = phandle++;
- qemu_fdt_setprop_cell(fdt, intc_name, "phandle", intc_phandle);
- qemu_fdt_setprop_string(fdt, intc_name, "compatible",
- "riscv,cpu-intc");
- qemu_fdt_setprop(fdt, intc_name, "interrupt-controller", NULL, 0);
- qemu_fdt_setprop_cell(fdt, intc_name, "#interrupt-cells", 1);
-
- clint_cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle);
- clint_cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_SOFT);
- clint_cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle);
- clint_cells[cpu * 4 + 3] = cpu_to_be32(IRQ_M_TIMER);
-
- plic_cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle);
- plic_cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_EXT);
- plic_cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle);
- plic_cells[cpu * 4 + 3] = cpu_to_be32(IRQ_S_EXT);
-
- core_name = g_strdup_printf("%s/core%d", clust_name, cpu);
- qemu_fdt_add_subnode(fdt, core_name);
- qemu_fdt_setprop_cell(fdt, core_name, "cpu", cpu_phandle);
-
- g_free(core_name);
- g_free(intc_name);
- g_free(cpu_name);
- }
+ qemu_fdt_add_subnode(mc->fdt, clust_name);
+
+ intc_phandles = g_new0(uint32_t, s->soc[socket].num_harts);
+
+ create_fdt_socket_cpus(s, socket, clust_name, phandle,
+ is_32_bit, intc_phandles);
- addr = memmap[VIRT_DRAM].base + riscv_socket_mem_offset(mc, socket);
- size = riscv_socket_mem_size(mc, socket);
- mem_name = g_strdup_printf("/memory@%lx", (long)addr);
- qemu_fdt_add_subnode(fdt, mem_name);
- qemu_fdt_setprop_cells(fdt, mem_name, "reg",
- addr >> 32, addr, size >> 32, size);
- qemu_fdt_setprop_string(fdt, mem_name, "device_type", "memory");
- riscv_socket_fdt_write_id(mc, fdt, mem_name, socket);
- g_free(mem_name);
-
- clint_addr = memmap[VIRT_CLINT].base +
- (memmap[VIRT_CLINT].size * socket);
- clint_name = g_strdup_printf("/soc/clint@%lx", clint_addr);
- qemu_fdt_add_subnode(fdt, clint_name);
- qemu_fdt_setprop_string_array(fdt, clint_name, "compatible",
- (char **)&clint_compat, ARRAY_SIZE(clint_compat));
- qemu_fdt_setprop_cells(fdt, clint_name, "reg",
- 0x0, clint_addr, 0x0, memmap[VIRT_CLINT].size);
- qemu_fdt_setprop(fdt, clint_name, "interrupts-extended",
- clint_cells, s->soc[socket].num_harts * sizeof(uint32_t) * 4);
- riscv_socket_fdt_write_id(mc, fdt, clint_name, socket);
- g_free(clint_name);
-
- plic_phandle[socket] = phandle++;
- plic_addr = memmap[VIRT_PLIC].base + (memmap[VIRT_PLIC].size * socket);
- plic_name = g_strdup_printf("/soc/plic@%lx", plic_addr);
- qemu_fdt_add_subnode(fdt, plic_name);
- qemu_fdt_setprop_cell(fdt, plic_name,
- "#address-cells", FDT_PLIC_ADDR_CELLS);
- qemu_fdt_setprop_cell(fdt, plic_name,
- "#interrupt-cells", FDT_PLIC_INT_CELLS);
- qemu_fdt_setprop_string_array(fdt, plic_name, "compatible",
- (char **)&plic_compat, ARRAY_SIZE(plic_compat));
- qemu_fdt_setprop(fdt, plic_name, "interrupt-controller", NULL, 0);
- qemu_fdt_setprop(fdt, plic_name, "interrupts-extended",
- plic_cells, s->soc[socket].num_harts * sizeof(uint32_t) * 4);
- qemu_fdt_setprop_cells(fdt, plic_name, "reg",
- 0x0, plic_addr, 0x0, memmap[VIRT_PLIC].size);
- qemu_fdt_setprop_cell(fdt, plic_name, "riscv,ndev", VIRTIO_NDEV);
- riscv_socket_fdt_write_id(mc, fdt, plic_name, socket);
- qemu_fdt_setprop_cell(fdt, plic_name, "phandle", plic_phandle[socket]);
- g_free(plic_name);
-
- g_free(clint_cells);
- g_free(plic_cells);
+ create_fdt_socket_memory(s, memmap, socket);
+
+ create_fdt_socket_clint(s, memmap, socket, intc_phandles);
+
+ create_fdt_socket_plic(s, memmap, socket, phandle,
+ intc_phandles, xplic_phandles);
+
+ g_free(intc_phandles);
g_free(clust_name);
}
for (socket = 0; socket < riscv_socket_count(mc); socket++) {
if (socket == 0) {
- plic_mmio_phandle = plic_phandle[socket];
- plic_virtio_phandle = plic_phandle[socket];
- plic_pcie_phandle = plic_phandle[socket];
+ *irq_mmio_phandle = xplic_phandles[socket];
+ *irq_virtio_phandle = xplic_phandles[socket];
+ *irq_pcie_phandle = xplic_phandles[socket];
}
if (socket == 1) {
- plic_virtio_phandle = plic_phandle[socket];
- plic_pcie_phandle = plic_phandle[socket];
+ *irq_virtio_phandle = xplic_phandles[socket];
+ *irq_pcie_phandle = xplic_phandles[socket];
}
if (socket == 2) {
- plic_pcie_phandle = plic_phandle[socket];
+ *irq_pcie_phandle = xplic_phandles[socket];
}
}
- riscv_socket_fdt_write_distance_matrix(mc, fdt);
+ riscv_socket_fdt_write_distance_matrix(mc, mc->fdt);
+}
+
+static void create_fdt_virtio(RISCVVirtState *s, const MemMapEntry *memmap,
+ uint32_t irq_virtio_phandle)
+{
+ int i;
+ char *name;
+ MachineState *mc = MACHINE(s);
for (i = 0; i < VIRTIO_COUNT; i++) {
name = g_strdup_printf("/soc/virtio_mmio@%lx",
(long)(memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size));
- qemu_fdt_add_subnode(fdt, name);
- qemu_fdt_setprop_string(fdt, name, "compatible", "virtio,mmio");
- qemu_fdt_setprop_cells(fdt, name, "reg",
+ qemu_fdt_add_subnode(mc->fdt, name);
+ qemu_fdt_setprop_string(mc->fdt, name, "compatible", "virtio,mmio");
+ qemu_fdt_setprop_cells(mc->fdt, name, "reg",
0x0, memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size,
0x0, memmap[VIRT_VIRTIO].size);
- qemu_fdt_setprop_cell(fdt, name, "interrupt-parent",
- plic_virtio_phandle);
- qemu_fdt_setprop_cell(fdt, name, "interrupts", VIRTIO_IRQ + i);
+ qemu_fdt_setprop_cell(mc->fdt, name, "interrupt-parent",
+ irq_virtio_phandle);
+ qemu_fdt_setprop_cell(mc->fdt, name, "interrupts", VIRTIO_IRQ + i);
g_free(name);
}
+}
+
+static void create_fdt_pcie(RISCVVirtState *s, const MemMapEntry *memmap,
+ uint32_t irq_pcie_phandle)
+{
+ char *name;
+ MachineState *mc = MACHINE(s);
name = g_strdup_printf("/soc/pci@%lx",
(long) memmap[VIRT_PCIE_ECAM].base);
- qemu_fdt_add_subnode(fdt, name);
- qemu_fdt_setprop_cell(fdt, name, "#address-cells", FDT_PCI_ADDR_CELLS);
- qemu_fdt_setprop_cell(fdt, name, "#interrupt-cells", FDT_PCI_INT_CELLS);
- qemu_fdt_setprop_cell(fdt, name, "#size-cells", 0x2);
- qemu_fdt_setprop_string(fdt, name, "compatible", "pci-host-ecam-generic");
- qemu_fdt_setprop_string(fdt, name, "device_type", "pci");
- qemu_fdt_setprop_cell(fdt, name, "linux,pci-domain", 0);
- qemu_fdt_setprop_cells(fdt, name, "bus-range", 0,
+ qemu_fdt_add_subnode(mc->fdt, name);
+ qemu_fdt_setprop_cell(mc->fdt, name, "#address-cells",
+ FDT_PCI_ADDR_CELLS);
+ qemu_fdt_setprop_cell(mc->fdt, name, "#interrupt-cells",
+ FDT_PCI_INT_CELLS);
+ qemu_fdt_setprop_cell(mc->fdt, name, "#size-cells", 0x2);
+ qemu_fdt_setprop_string(mc->fdt, name, "compatible",
+ "pci-host-ecam-generic");
+ qemu_fdt_setprop_string(mc->fdt, name, "device_type", "pci");
+ qemu_fdt_setprop_cell(mc->fdt, name, "linux,pci-domain", 0);
+ qemu_fdt_setprop_cells(mc->fdt, name, "bus-range", 0,
memmap[VIRT_PCIE_ECAM].size / PCIE_MMCFG_SIZE_MIN - 1);
- qemu_fdt_setprop(fdt, name, "dma-coherent", NULL, 0);
- qemu_fdt_setprop_cells(fdt, name, "reg", 0,
+ qemu_fdt_setprop(mc->fdt, name, "dma-coherent", NULL, 0);
+ qemu_fdt_setprop_cells(mc->fdt, name, "reg", 0,
memmap[VIRT_PCIE_ECAM].base, 0, memmap[VIRT_PCIE_ECAM].size);
- qemu_fdt_setprop_sized_cells(fdt, name, "ranges",
+ qemu_fdt_setprop_sized_cells(mc->fdt, name, "ranges",
1, FDT_PCI_RANGE_IOPORT, 2, 0,
2, memmap[VIRT_PCIE_PIO].base, 2, memmap[VIRT_PCIE_PIO].size,
1, FDT_PCI_RANGE_MMIO,
@@ -393,66 +441,96 @@ static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap,
2, virt_high_pcie_memmap.base,
2, virt_high_pcie_memmap.base, 2, virt_high_pcie_memmap.size);
- create_pcie_irq_map(fdt, name, plic_pcie_phandle);
+ create_pcie_irq_map(mc->fdt, name, irq_pcie_phandle);
g_free(name);
+}
- test_phandle = phandle++;
+static void create_fdt_reset(RISCVVirtState *s, const MemMapEntry *memmap,
+ uint32_t *phandle)
+{
+ char *name;
+ uint32_t test_phandle;
+ MachineState *mc = MACHINE(s);
+
+ test_phandle = (*phandle)++;
name = g_strdup_printf("/soc/test@%lx",
(long)memmap[VIRT_TEST].base);
- qemu_fdt_add_subnode(fdt, name);
+ qemu_fdt_add_subnode(mc->fdt, name);
{
static const char * const compat[3] = {
"sifive,test1", "sifive,test0", "syscon"
};
- qemu_fdt_setprop_string_array(fdt, name, "compatible", (char **)&compat,
- ARRAY_SIZE(compat));
+ qemu_fdt_setprop_string_array(mc->fdt, name, "compatible",
+ (char **)&compat, ARRAY_SIZE(compat));
}
- qemu_fdt_setprop_cells(fdt, name, "reg",
- 0x0, memmap[VIRT_TEST].base,
- 0x0, memmap[VIRT_TEST].size);
- qemu_fdt_setprop_cell(fdt, name, "phandle", test_phandle);
- test_phandle = qemu_fdt_get_phandle(fdt, name);
+ qemu_fdt_setprop_cells(mc->fdt, name, "reg",
+ 0x0, memmap[VIRT_TEST].base, 0x0, memmap[VIRT_TEST].size);
+ qemu_fdt_setprop_cell(mc->fdt, name, "phandle", test_phandle);
+ test_phandle = qemu_fdt_get_phandle(mc->fdt, name);
g_free(name);
name = g_strdup_printf("/soc/reboot");
- qemu_fdt_add_subnode(fdt, name);
- qemu_fdt_setprop_string(fdt, name, "compatible", "syscon-reboot");
- qemu_fdt_setprop_cell(fdt, name, "regmap", test_phandle);
- qemu_fdt_setprop_cell(fdt, name, "offset", 0x0);
- qemu_fdt_setprop_cell(fdt, name, "value", FINISHER_RESET);
+ qemu_fdt_add_subnode(mc->fdt, name);
+ qemu_fdt_setprop_string(mc->fdt, name, "compatible", "syscon-reboot");
+ qemu_fdt_setprop_cell(mc->fdt, name, "regmap", test_phandle);
+ qemu_fdt_setprop_cell(mc->fdt, name, "offset", 0x0);
+ qemu_fdt_setprop_cell(mc->fdt, name, "value", FINISHER_RESET);
g_free(name);
name = g_strdup_printf("/soc/poweroff");
- qemu_fdt_add_subnode(fdt, name);
- qemu_fdt_setprop_string(fdt, name, "compatible", "syscon-poweroff");
- qemu_fdt_setprop_cell(fdt, name, "regmap", test_phandle);
- qemu_fdt_setprop_cell(fdt, name, "offset", 0x0);
- qemu_fdt_setprop_cell(fdt, name, "value", FINISHER_PASS);
+ qemu_fdt_add_subnode(mc->fdt, name);
+ qemu_fdt_setprop_string(mc->fdt, name, "compatible", "syscon-poweroff");
+ qemu_fdt_setprop_cell(mc->fdt, name, "regmap", test_phandle);
+ qemu_fdt_setprop_cell(mc->fdt, name, "offset", 0x0);
+ qemu_fdt_setprop_cell(mc->fdt, name, "value", FINISHER_PASS);
g_free(name);
+}
+
+static void create_fdt_uart(RISCVVirtState *s, const MemMapEntry *memmap,
+ uint32_t irq_mmio_phandle)
+{
+ char *name;
+ MachineState *mc = MACHINE(s);
name = g_strdup_printf("/soc/uart@%lx", (long)memmap[VIRT_UART0].base);
- qemu_fdt_add_subnode(fdt, name);
- qemu_fdt_setprop_string(fdt, name, "compatible", "ns16550a");
- qemu_fdt_setprop_cells(fdt, name, "reg",
+ qemu_fdt_add_subnode(mc->fdt, name);
+ qemu_fdt_setprop_string(mc->fdt, name, "compatible", "ns16550a");
+ qemu_fdt_setprop_cells(mc->fdt, name, "reg",
0x0, memmap[VIRT_UART0].base,
0x0, memmap[VIRT_UART0].size);
- qemu_fdt_setprop_cell(fdt, name, "clock-frequency", 3686400);
- qemu_fdt_setprop_cell(fdt, name, "interrupt-parent", plic_mmio_phandle);
- qemu_fdt_setprop_cell(fdt, name, "interrupts", UART0_IRQ);
+ qemu_fdt_setprop_cell(mc->fdt, name, "clock-frequency", 3686400);
+ qemu_fdt_setprop_cell(mc->fdt, name, "interrupt-parent", irq_mmio_phandle);
+ qemu_fdt_setprop_cell(mc->fdt, name, "interrupts", UART0_IRQ);
- qemu_fdt_add_subnode(fdt, "/chosen");
- qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", name);
+ qemu_fdt_add_subnode(mc->fdt, "/chosen");
+ qemu_fdt_setprop_string(mc->fdt, "/chosen", "stdout-path", name);
g_free(name);
+}
+
+static void create_fdt_rtc(RISCVVirtState *s, const MemMapEntry *memmap,
+ uint32_t irq_mmio_phandle)
+{
+ char *name;
+ MachineState *mc = MACHINE(s);
name = g_strdup_printf("/soc/rtc@%lx", (long)memmap[VIRT_RTC].base);
- qemu_fdt_add_subnode(fdt, name);
- qemu_fdt_setprop_string(fdt, name, "compatible", "google,goldfish-rtc");
- qemu_fdt_setprop_cells(fdt, name, "reg",
- 0x0, memmap[VIRT_RTC].base,
- 0x0, memmap[VIRT_RTC].size);
- qemu_fdt_setprop_cell(fdt, name, "interrupt-parent", plic_mmio_phandle);
- qemu_fdt_setprop_cell(fdt, name, "interrupts", RTC_IRQ);
+ qemu_fdt_add_subnode(mc->fdt, name);
+ qemu_fdt_setprop_string(mc->fdt, name, "compatible",
+ "google,goldfish-rtc");
+ qemu_fdt_setprop_cells(mc->fdt, name, "reg",
+ 0x0, memmap[VIRT_RTC].base, 0x0, memmap[VIRT_RTC].size);
+ qemu_fdt_setprop_cell(mc->fdt, name, "interrupt-parent",
+ irq_mmio_phandle);
+ qemu_fdt_setprop_cell(mc->fdt, name, "interrupts", RTC_IRQ);
g_free(name);
+}
+
+static void create_fdt_flash(RISCVVirtState *s, const MemMapEntry *memmap)
+{
+ char *name;
+ MachineState *mc = MACHINE(s);
+ hwaddr flashsize = virt_memmap[VIRT_FLASH].size / 2;
+ hwaddr flashbase = virt_memmap[VIRT_FLASH].base;
name = g_strdup_printf("/flash@%" PRIx64, flashbase);
qemu_fdt_add_subnode(mc->fdt, name);
@@ -462,10 +540,59 @@ static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap,
2, flashbase + flashsize, 2, flashsize);
qemu_fdt_setprop_cell(mc->fdt, name, "bank-width", 4);
g_free(name);
+}
+
+static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap,
+ uint64_t mem_size, const char *cmdline, bool is_32_bit)
+{
+ MachineState *mc = MACHINE(s);
+ uint32_t phandle = 1, irq_mmio_phandle = 1;
+ uint32_t irq_pcie_phandle = 1, irq_virtio_phandle = 1;
+
+ if (mc->dtb) {
+ mc->fdt = load_device_tree(mc->dtb, &s->fdt_size);
+ if (!mc->fdt) {
+ error_report("load_device_tree() failed");
+ exit(1);
+ }
+ goto update_bootargs;
+ } else {
+ mc->fdt = create_device_tree(&s->fdt_size);
+ if (!mc->fdt) {
+ error_report("create_device_tree() failed");
+ exit(1);
+ }
+ }
+
+ qemu_fdt_setprop_string(mc->fdt, "/", "model", "riscv-virtio,qemu");
+ qemu_fdt_setprop_string(mc->fdt, "/", "compatible", "riscv-virtio");
+ qemu_fdt_setprop_cell(mc->fdt, "/", "#size-cells", 0x2);
+ qemu_fdt_setprop_cell(mc->fdt, "/", "#address-cells", 0x2);
+
+ qemu_fdt_add_subnode(mc->fdt, "/soc");
+ qemu_fdt_setprop(mc->fdt, "/soc", "ranges", NULL, 0);
+ qemu_fdt_setprop_string(mc->fdt, "/soc", "compatible", "simple-bus");
+ qemu_fdt_setprop_cell(mc->fdt, "/soc", "#size-cells", 0x2);
+ qemu_fdt_setprop_cell(mc->fdt, "/soc", "#address-cells", 0x2);
+
+ create_fdt_sockets(s, memmap, is_32_bit, &phandle,
+ &irq_mmio_phandle, &irq_pcie_phandle, &irq_virtio_phandle);
+
+ create_fdt_virtio(s, memmap, irq_virtio_phandle);
+
+ create_fdt_pcie(s, memmap, irq_pcie_phandle);
+
+ create_fdt_reset(s, memmap, &phandle);
+
+ create_fdt_uart(s, memmap, irq_mmio_phandle);
+
+ create_fdt_rtc(s, memmap, irq_mmio_phandle);
+
+ create_fdt_flash(s, memmap);
update_bootargs:
if (cmdline) {
- qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", cmdline);
+ qemu_fdt_setprop_string(mc->fdt, "/chosen", "bootargs", cmdline);
}
}
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PULL v2 13/21] hw/riscv: virt: Add optional ACLINT support to virt machine
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
` (11 preceding siblings ...)
2021-09-21 6:54 ` [PULL v2 12/21] hw/riscv: virt: Re-factor FDT generation Alistair Francis
@ 2021-09-21 6:54 ` Alistair Francis
2021-09-21 6:54 ` [PULL v2 14/21] hw/dma: sifive_pdma: reset Next* registers when Control.claim is set Alistair Francis
` (8 subsequent siblings)
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:54 UTC (permalink / raw)
To: qemu-devel, peter.maydell
Cc: alistair23, Anup Patel, Alistair Francis, Bin Meng
From: Anup Patel <anup.patel@wdc.com>
We extend virt machine to emulate ACLINT devices only when "aclint=on"
parameter is passed along with machine name in QEMU command-line.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210831110603.338681-5-anup.patel@wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
docs/system/riscv/virt.rst | 10 ++++
include/hw/riscv/virt.h | 2 +
hw/riscv/virt.c | 113 ++++++++++++++++++++++++++++++++++++-
3 files changed, 124 insertions(+), 1 deletion(-)
diff --git a/docs/system/riscv/virt.rst b/docs/system/riscv/virt.rst
index 321d77e07d..fa016584bf 100644
--- a/docs/system/riscv/virt.rst
+++ b/docs/system/riscv/virt.rst
@@ -53,6 +53,16 @@ with the default OpenSBI firmware image as the -bios. It also supports
the recommended RISC-V bootflow: U-Boot SPL (M-mode) loads OpenSBI fw_dynamic
firmware and U-Boot proper (S-mode), using the standard -bios functionality.
+Machine-specific options
+------------------------
+
+The following machine-specific options are supported:
+
+- aclint=[on|off]
+
+ When this option is "on", ACLINT devices will be emulated instead of
+ SiFive CLINT. When not specified, this option is assumed to be "off".
+
Running Linux kernel
--------------------
diff --git a/include/hw/riscv/virt.h b/include/hw/riscv/virt.h
index 349fee1f89..d9105c1886 100644
--- a/include/hw/riscv/virt.h
+++ b/include/hw/riscv/virt.h
@@ -43,6 +43,7 @@ struct RISCVVirtState {
FWCfgState *fw_cfg;
int fdt_size;
+ bool have_aclint;
};
enum {
@@ -51,6 +52,7 @@ enum {
VIRT_TEST,
VIRT_RTC,
VIRT_CLINT,
+ VIRT_ACLINT_SSWI,
VIRT_PLIC,
VIRT_UART0,
VIRT_VIRTIO,
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 7f716901ef..ec0cb69b8c 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -48,6 +48,7 @@ static const MemMapEntry virt_memmap[] = {
[VIRT_TEST] = { 0x100000, 0x1000 },
[VIRT_RTC] = { 0x101000, 0x1000 },
[VIRT_CLINT] = { 0x2000000, 0x10000 },
+ [VIRT_ACLINT_SSWI] = { 0x2F00000, 0x4000 },
[VIRT_PCIE_PIO] = { 0x3000000, 0x10000 },
[VIRT_PLIC] = { 0xc000000, VIRT_PLIC_SIZE(VIRT_CPUS_MAX * 2) },
[VIRT_UART0] = { 0x10000000, 0x100 },
@@ -281,6 +282,82 @@ static void create_fdt_socket_clint(RISCVVirtState *s,
g_free(clint_cells);
}
+static void create_fdt_socket_aclint(RISCVVirtState *s,
+ const MemMapEntry *memmap, int socket,
+ uint32_t *intc_phandles)
+{
+ int cpu;
+ char *name;
+ unsigned long addr;
+ uint32_t aclint_cells_size;
+ uint32_t *aclint_mswi_cells;
+ uint32_t *aclint_sswi_cells;
+ uint32_t *aclint_mtimer_cells;
+ MachineState *mc = MACHINE(s);
+
+ aclint_mswi_cells = g_new0(uint32_t, s->soc[socket].num_harts * 2);
+ aclint_mtimer_cells = g_new0(uint32_t, s->soc[socket].num_harts * 2);
+ aclint_sswi_cells = g_new0(uint32_t, s->soc[socket].num_harts * 2);
+
+ for (cpu = 0; cpu < s->soc[socket].num_harts; cpu++) {
+ aclint_mswi_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]);
+ aclint_mswi_cells[cpu * 2 + 1] = cpu_to_be32(IRQ_M_SOFT);
+ aclint_mtimer_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]);
+ aclint_mtimer_cells[cpu * 2 + 1] = cpu_to_be32(IRQ_M_TIMER);
+ aclint_sswi_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]);
+ aclint_sswi_cells[cpu * 2 + 1] = cpu_to_be32(IRQ_S_SOFT);
+ }
+ aclint_cells_size = s->soc[socket].num_harts * sizeof(uint32_t) * 2;
+
+ addr = memmap[VIRT_CLINT].base + (memmap[VIRT_CLINT].size * socket);
+ name = g_strdup_printf("/soc/mswi@%lx", addr);
+ qemu_fdt_add_subnode(mc->fdt, name);
+ qemu_fdt_setprop_string(mc->fdt, name, "compatible", "riscv,aclint-mswi");
+ qemu_fdt_setprop_cells(mc->fdt, name, "reg",
+ 0x0, addr, 0x0, RISCV_ACLINT_SWI_SIZE);
+ qemu_fdt_setprop(mc->fdt, name, "interrupts-extended",
+ aclint_mswi_cells, aclint_cells_size);
+ qemu_fdt_setprop(mc->fdt, name, "interrupt-controller", NULL, 0);
+ qemu_fdt_setprop_cell(mc->fdt, name, "#interrupt-cells", 0);
+ riscv_socket_fdt_write_id(mc, mc->fdt, name, socket);
+ g_free(name);
+
+ addr = memmap[VIRT_CLINT].base + RISCV_ACLINT_SWI_SIZE +
+ (memmap[VIRT_CLINT].size * socket);
+ name = g_strdup_printf("/soc/mtimer@%lx", addr);
+ qemu_fdt_add_subnode(mc->fdt, name);
+ qemu_fdt_setprop_string(mc->fdt, name, "compatible",
+ "riscv,aclint-mtimer");
+ qemu_fdt_setprop_cells(mc->fdt, name, "reg",
+ 0x0, addr + RISCV_ACLINT_DEFAULT_MTIME,
+ 0x0, memmap[VIRT_CLINT].size - RISCV_ACLINT_SWI_SIZE -
+ RISCV_ACLINT_DEFAULT_MTIME,
+ 0x0, addr + RISCV_ACLINT_DEFAULT_MTIMECMP,
+ 0x0, RISCV_ACLINT_DEFAULT_MTIME);
+ qemu_fdt_setprop(mc->fdt, name, "interrupts-extended",
+ aclint_mtimer_cells, aclint_cells_size);
+ riscv_socket_fdt_write_id(mc, mc->fdt, name, socket);
+ g_free(name);
+
+ addr = memmap[VIRT_ACLINT_SSWI].base +
+ (memmap[VIRT_ACLINT_SSWI].size * socket);
+ name = g_strdup_printf("/soc/sswi@%lx", addr);
+ qemu_fdt_add_subnode(mc->fdt, name);
+ qemu_fdt_setprop_string(mc->fdt, name, "compatible", "riscv,aclint-sswi");
+ qemu_fdt_setprop_cells(mc->fdt, name, "reg",
+ 0x0, addr, 0x0, memmap[VIRT_ACLINT_SSWI].size);
+ qemu_fdt_setprop(mc->fdt, name, "interrupts-extended",
+ aclint_sswi_cells, aclint_cells_size);
+ qemu_fdt_setprop(mc->fdt, name, "interrupt-controller", NULL, 0);
+ qemu_fdt_setprop_cell(mc->fdt, name, "#interrupt-cells", 0);
+ riscv_socket_fdt_write_id(mc, mc->fdt, name, socket);
+ g_free(name);
+
+ g_free(aclint_mswi_cells);
+ g_free(aclint_mtimer_cells);
+ g_free(aclint_sswi_cells);
+}
+
static void create_fdt_socket_plic(RISCVVirtState *s,
const MemMapEntry *memmap, int socket,
uint32_t *phandle, uint32_t *intc_phandles,
@@ -359,7 +436,11 @@ static void create_fdt_sockets(RISCVVirtState *s, const MemMapEntry *memmap,
create_fdt_socket_memory(s, memmap, socket);
- create_fdt_socket_clint(s, memmap, socket, intc_phandles);
+ if (s->have_aclint) {
+ create_fdt_socket_aclint(s, memmap, socket, intc_phandles);
+ } else {
+ create_fdt_socket_clint(s, memmap, socket, intc_phandles);
+ }
create_fdt_socket_plic(s, memmap, socket, phandle,
intc_phandles, xplic_phandles);
@@ -750,6 +831,14 @@ static void virt_machine_init(MachineState *machine)
RISCV_ACLINT_DEFAULT_MTIMECMP, RISCV_ACLINT_DEFAULT_MTIME,
RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ, true);
+ /* Per-socket ACLINT SSWI */
+ if (s->have_aclint) {
+ riscv_aclint_swi_create(
+ memmap[VIRT_ACLINT_SSWI].base +
+ i * memmap[VIRT_ACLINT_SSWI].size,
+ base_hartid, hart_count, true);
+ }
+
/* Per-socket PLIC hart topology configuration string */
plic_hart_config = plic_hart_config_string(hart_count);
@@ -914,6 +1003,22 @@ static void virt_machine_instance_init(Object *obj)
{
}
+static bool virt_get_aclint(Object *obj, Error **errp)
+{
+ MachineState *ms = MACHINE(obj);
+ RISCVVirtState *s = RISCV_VIRT_MACHINE(ms);
+
+ return s->have_aclint;
+}
+
+static void virt_set_aclint(Object *obj, bool value, Error **errp)
+{
+ MachineState *ms = MACHINE(obj);
+ RISCVVirtState *s = RISCV_VIRT_MACHINE(ms);
+
+ s->have_aclint = value;
+}
+
static void virt_machine_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
@@ -929,6 +1034,12 @@ static void virt_machine_class_init(ObjectClass *oc, void *data)
mc->numa_mem_supported = true;
machine_class_allow_dynamic_sysbus_dev(mc, TYPE_RAMFB_DEVICE);
+
+ object_class_property_add_bool(oc, "aclint", virt_get_aclint,
+ virt_set_aclint);
+ object_class_property_set_description(oc, "aclint",
+ "Set on/off to enable/disable "
+ "emulating ACLINT devices");
}
static const TypeInfo virt_machine_typeinfo = {
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PULL v2 14/21] hw/dma: sifive_pdma: reset Next* registers when Control.claim is set
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
` (12 preceding siblings ...)
2021-09-21 6:54 ` [PULL v2 13/21] hw/riscv: virt: Add optional ACLINT support to virt machine Alistair Francis
@ 2021-09-21 6:54 ` Alistair Francis
2021-09-21 6:54 ` [PULL v2 15/21] hw/dma: sifive_pdma: claim bit must be set before DMA transactions Alistair Francis
` (7 subsequent siblings)
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:54 UTC (permalink / raw)
To: qemu-devel, peter.maydell
Cc: alistair23, Frank Chang, Max Hsu, Bin Meng, Alistair Francis
From: Frank Chang <frank.chang@sifive.com>
Setting Control.claim clears all of the chanel's Next registers.
This is effective only when Control.claim is set from 0 to 1.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Tested-by: Max Hsu <max.hsu@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210912130553.179501-2-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
hw/dma/sifive_pdma.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/hw/dma/sifive_pdma.c b/hw/dma/sifive_pdma.c
index 9b2ac2017d..d92e27dfdc 100644
--- a/hw/dma/sifive_pdma.c
+++ b/hw/dma/sifive_pdma.c
@@ -54,6 +54,13 @@
#define DMA_EXEC_DST 0x110
#define DMA_EXEC_SRC 0x118
+/*
+ * FU540/FU740 docs are incorrect with NextConfig.wsize/rsize reset values.
+ * The reset values tested on Unleashed/Unmatched boards are 6 instead of 0.
+ */
+#define CONFIG_WRSZ_DEFAULT 6
+#define CONFIG_RDSZ_DEFAULT 6
+
enum dma_chan_state {
DMA_CHAN_STATE_IDLE,
DMA_CHAN_STATE_STARTED,
@@ -221,6 +228,7 @@ static void sifive_pdma_write(void *opaque, hwaddr offset,
{
SiFivePDMAState *s = opaque;
int ch = SIFIVE_PDMA_CHAN_NO(offset);
+ bool claimed;
if (ch >= SIFIVE_PDMA_CHANS) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid channel no %d\n",
@@ -231,6 +239,17 @@ static void sifive_pdma_write(void *opaque, hwaddr offset,
offset &= 0xfff;
switch (offset) {
case DMA_CONTROL:
+ claimed = !!s->chan[ch].control & CONTROL_CLAIM;
+
+ if (!claimed && (value & CONTROL_CLAIM)) {
+ /* reset Next* registers */
+ s->chan[ch].next_config = (CONFIG_RDSZ_DEFAULT << CONFIG_RDSZ_SHIFT) |
+ (CONFIG_WRSZ_DEFAULT << CONFIG_WRSZ_SHIFT);
+ s->chan[ch].next_bytes = 0;
+ s->chan[ch].next_dst = 0;
+ s->chan[ch].next_src = 0;
+ }
+
s->chan[ch].control = value;
if (value & CONTROL_RUN) {
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PULL v2 15/21] hw/dma: sifive_pdma: claim bit must be set before DMA transactions
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
` (13 preceding siblings ...)
2021-09-21 6:54 ` [PULL v2 14/21] hw/dma: sifive_pdma: reset Next* registers when Control.claim is set Alistair Francis
@ 2021-09-21 6:54 ` Alistair Francis
2021-09-21 6:54 ` [PULL v2 16/21] hw/dma: sifive_pdma: allow non-multiple transaction size transactions Alistair Francis
` (6 subsequent siblings)
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:54 UTC (permalink / raw)
To: qemu-devel, peter.maydell
Cc: alistair23, Frank Chang, Max Hsu, Bin Meng, Alistair Francis
From: Frank Chang <frank.chang@sifive.com>
Real PDMA must have Control.claim bit to be set before
Control.run bit is set to start any DMA transactions.
Otherwise nothing will be transferred.
The following result is PDMA tested in U-Boot on Unmatched board:
=> mw.l 0x3000000 0x0 <= Disclaim channel 0
(Channel 0 is not claimed)
=> mw.l 0x3000004 0x55000000 <= wsize = rsize = 5 (2^5 = 32 bytes)
=> mw.q 0x3000008 0x2 <= NextBytes = 2
=> mw.q 0x3000010 0x84000000 <= NextDestination = 0x84000000
=> mw.q 0x3000018 0x84001000 <= NextSource = 0x84001000
=> mw.l 0x84000000 0x87654321 <= Fill test data to dst
=> mw.l 0x84001000 0x12345678 <= Fill test data to src
=> md.l 0x84000000 1; md.l 0x84001000 1 <= Dump src/dst memory contents
84000000: 87654321 !Ce.
84001000: 12345678 xV4.
=> md.l 0x3000000 8 <= Dump PDMA status
03000000: 00000000 55000000 00000002 00000000 .......U........
03000010: 84000000 00000000 84001000 00000000 ................
=> mw.l 0x3000000 0x3 <= Set channel 0 run and claim bits
=> md.l 0x3000000 8 <= Dump PDMA status
03000000: 00000001 66000000 00000000 00000000 .......f........
03000010: 00000000 00000000 00000000 00000000 ................
=> md.l 0x84000000 1; md.l 0x84001000 1 <= Dump src/dst memory contents
84000000: 87654321 !Ce.
84001000: 12345678 xV4.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Tested-by: Max Hsu <max.hsu@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210912130553.179501-3-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
hw/dma/sifive_pdma.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/hw/dma/sifive_pdma.c b/hw/dma/sifive_pdma.c
index d92e27dfdc..a8ce3e6699 100644
--- a/hw/dma/sifive_pdma.c
+++ b/hw/dma/sifive_pdma.c
@@ -252,6 +252,15 @@ static void sifive_pdma_write(void *opaque, hwaddr offset,
s->chan[ch].control = value;
+ /*
+ * If channel was not claimed before run bit is set,
+ * DMA won't run.
+ */
+ if (!claimed) {
+ s->chan[ch].control &= ~CONTROL_RUN;
+ return;
+ }
+
if (value & CONTROL_RUN) {
sifive_pdma_run(s, ch);
}
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PULL v2 16/21] hw/dma: sifive_pdma: allow non-multiple transaction size transactions
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
` (14 preceding siblings ...)
2021-09-21 6:54 ` [PULL v2 15/21] hw/dma: sifive_pdma: claim bit must be set before DMA transactions Alistair Francis
@ 2021-09-21 6:54 ` Alistair Francis
2021-09-21 6:54 ` [PULL v2 17/21] hw/dma: sifive_pdma: don't set Control.error if 0 bytes to transfer Alistair Francis
` (5 subsequent siblings)
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:54 UTC (permalink / raw)
To: qemu-devel, peter.maydell
Cc: alistair23, Green Wan, Frank Chang, Max Hsu, Bin Meng, Alistair Francis
From: Green Wan <green.wan@sifive.com>
Real PDMA is able to deal with non-multiple transaction size transactions.
The following result is PDMA tested in U-Boot on Unmatched board:
=> mw.l 0x3000000 0x0 <= Disclaim channel 0
=> mw.l 0x3000000 0x1 <= Claim channel 0
=> mw.l 0x3000004 0x11000000 <= wsize = rsize = 1 (2^1 = 2 bytes)
=> mw.q 0x3000008 0x3 <= NextBytes = 3
=> mw.q 0x3000010 0x84000000 <= NextDestination = 0x84000000
=> mw.q 0x3000018 0x84001000 <= NextSource = 0x84001000
=> mw.l 0x84000000 0x87654321 <= Fill test data to dst
=> mw.l 0x84001000 0x12345678 <= Fill test data to src
=> md.l 0x84000000 1; md.l 0x84001000 1 <= Dump src/dst memory contents
84000000: 87654321 !Ce.
84001000: 12345678 xV4.
=> md.l 0x3000000 8 <= Dump PDMA status
03000000: 00000001 11000000 00000003 00000000 ................
03000010: 84000000 00000000 84001000 00000000 ................
=> mw.l 0x3000000 0x3 <= Set channel 0 run and claim bits
=> md.l 0x3000000 8 <= Dump PDMA status
03000000: 40000001 11000000 00000003 00000000 ...@............
03000010: 84000000 00000000 84001000 00000000 ................
=> md.l 0x84000000 1; md.l 0x84001000 1 <= Dump src/dst memory contents
84000000: 87345678 xV4.
84001000: 12345678 xV4.
Signed-off-by: Green Wan <green.wan@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Tested-by: Max Hsu <max.hsu@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20210912130553.179501-4-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
hw/dma/sifive_pdma.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/hw/dma/sifive_pdma.c b/hw/dma/sifive_pdma.c
index a8ce3e6699..d7d2c53e97 100644
--- a/hw/dma/sifive_pdma.c
+++ b/hw/dma/sifive_pdma.c
@@ -74,7 +74,7 @@ static void sifive_pdma_run(SiFivePDMAState *s, int ch)
uint64_t dst = s->chan[ch].next_dst;
uint64_t src = s->chan[ch].next_src;
uint32_t config = s->chan[ch].next_config;
- int wsize, rsize, size;
+ int wsize, rsize, size, remainder;
uint8_t buf[64];
int n;
@@ -106,11 +106,7 @@ static void sifive_pdma_run(SiFivePDMAState *s, int ch)
size = 6;
}
size = 1 << size;
-
- /* the bytes to transfer should be multiple of transaction size */
- if (bytes % size) {
- goto error;
- }
+ remainder = bytes % size;
/* indicate a DMA transfer is started */
s->chan[ch].state = DMA_CHAN_STATE_STARTED;
@@ -131,6 +127,14 @@ static void sifive_pdma_run(SiFivePDMAState *s, int ch)
s->chan[ch].exec_bytes -= size;
}
+ if (remainder) {
+ cpu_physical_memory_read(s->chan[ch].exec_src, buf, remainder);
+ cpu_physical_memory_write(s->chan[ch].exec_dst, buf, remainder);
+ s->chan[ch].exec_src += remainder;
+ s->chan[ch].exec_dst += remainder;
+ s->chan[ch].exec_bytes -= remainder;
+ }
+
/* indicate a DMA transfer is done */
s->chan[ch].state = DMA_CHAN_STATE_DONE;
s->chan[ch].control &= ~CONTROL_RUN;
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PULL v2 17/21] hw/dma: sifive_pdma: don't set Control.error if 0 bytes to transfer
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
` (15 preceding siblings ...)
2021-09-21 6:54 ` [PULL v2 16/21] hw/dma: sifive_pdma: allow non-multiple transaction size transactions Alistair Francis
@ 2021-09-21 6:54 ` Alistair Francis
2021-09-21 6:54 ` [PULL v2 18/21] docs/system/riscv: sifive_u: Update U-Boot instructions Alistair Francis
` (4 subsequent siblings)
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:54 UTC (permalink / raw)
To: qemu-devel, peter.maydell
Cc: alistair23, Frank Chang, Max Hsu, Bin Meng, Alistair Francis
From: Frank Chang <frank.chang@sifive.com>
Real PDMA doesn't set Control.error if there are 0 bytes to be
transferred. The DMA transfer is still success.
The following result is PDMA tested in U-Boot on Unmatched board:
=> mw.l 0x3000000 0x0 <= Disclaim channel 0
=> mw.l 0x3000000 0x1 <= Claim channel 0
=> mw.l 0x3000004 0x55000000 <= wsize = rsize = 5 (2^5 = 32 bytes)
=> mw.q 0x3000008 0x0 <= NextBytes = 0
=> mw.q 0x3000010 0x84000000 <= NextDestination = 0x84000000
=> mw.q 0x3000018 0x84001000 <= NextSource = 0x84001000
=> mw.l 0x84000000 0x87654321 <= Fill test data to dst
=> mw.l 0x84001000 0x12345678 <= Fill test data to src
=> md.l 0x84000000 1; md.l 0x84001000 1 <= Dump src/dst memory contents
84000000: 87654321 !Ce.
84001000: 12345678 xV4.
=> md.l 0x3000000 8 <= Dump PDMA status
03000000: 00000001 55000000 00000000 00000000 .......U........
03000010: 84000000 00000000 84001000 00000000 ................
=> mw.l 0x3000000 0x3 <= Set channel 0 run and claim bits
=> md.l 0x3000000 8 <= Dump PDMA status
03000000: 40000001 55000000 00000000 00000000 ...@...U........
03000010: 84000000 00000000 84001000 00000000 ................
=> md.l 0x84000000 1; md.l 0x84001000 1 <= Dump src/dst memory contents
84000000: 87654321 !Ce.
84001000: 12345678 xV4.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Tested-by: Max Hsu <max.hsu@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210912130553.179501-5-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
hw/dma/sifive_pdma.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/hw/dma/sifive_pdma.c b/hw/dma/sifive_pdma.c
index d7d2c53e97..b4fd40573a 100644
--- a/hw/dma/sifive_pdma.c
+++ b/hw/dma/sifive_pdma.c
@@ -80,7 +80,7 @@ static void sifive_pdma_run(SiFivePDMAState *s, int ch)
/* do nothing if bytes to transfer is zero */
if (!bytes) {
- goto error;
+ goto done;
}
/*
@@ -135,11 +135,6 @@ static void sifive_pdma_run(SiFivePDMAState *s, int ch)
s->chan[ch].exec_bytes -= remainder;
}
- /* indicate a DMA transfer is done */
- s->chan[ch].state = DMA_CHAN_STATE_DONE;
- s->chan[ch].control &= ~CONTROL_RUN;
- s->chan[ch].control |= CONTROL_DONE;
-
/* reload exec_ registers if repeat is required */
if (s->chan[ch].next_config & CONFIG_REPEAT) {
s->chan[ch].exec_bytes = bytes;
@@ -147,6 +142,11 @@ static void sifive_pdma_run(SiFivePDMAState *s, int ch)
s->chan[ch].exec_src = src;
}
+done:
+ /* indicate a DMA transfer is done */
+ s->chan[ch].state = DMA_CHAN_STATE_DONE;
+ s->chan[ch].control &= ~CONTROL_RUN;
+ s->chan[ch].control |= CONTROL_DONE;
return;
error:
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PULL v2 18/21] docs/system/riscv: sifive_u: Update U-Boot instructions
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
` (16 preceding siblings ...)
2021-09-21 6:54 ` [PULL v2 17/21] hw/dma: sifive_pdma: don't set Control.error if 0 bytes to transfer Alistair Francis
@ 2021-09-21 6:54 ` Alistair Francis
2021-09-21 6:54 ` [PULL v2 19/21] target/riscv: Backup/restore mstatus.SD bit when virtual register swapped Alistair Francis
` (3 subsequent siblings)
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:54 UTC (permalink / raw)
To: qemu-devel, peter.maydell; +Cc: alistair23, Bin Meng, Alistair Francis
From: Bin Meng <bmeng.cn@gmail.com>
In U-Boot v2021.07 release, there were 2 major changes for the
SiFive Unleashed board support:
- Board config name was changed from sifive_fu540_defconfig to
sifive_unleashed_defconfig
- The generic binman tool was used to generate the FIT image
(combination of U-Boot proper, DTB and OpenSBI firmware)
which make the existing U-Boot instructions out of date.
Update the doc with latest instructions.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911153431.10362-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
docs/system/riscv/sifive_u.rst | 49 ++++++++++++++++++----------------
1 file changed, 26 insertions(+), 23 deletions(-)
diff --git a/docs/system/riscv/sifive_u.rst b/docs/system/riscv/sifive_u.rst
index 7c65e9c440..7b166567f9 100644
--- a/docs/system/riscv/sifive_u.rst
+++ b/docs/system/riscv/sifive_u.rst
@@ -210,15 +210,16 @@ command line options with ``qemu-system-riscv32``.
Running U-Boot
--------------
-U-Boot mainline v2021.01 release is tested at the time of writing. To build a
+U-Boot mainline v2021.07 release is tested at the time of writing. To build a
U-Boot mainline bootloader that can be booted by the ``sifive_u`` machine, use
-the sifive_fu540_defconfig with similar commands as described above for Linux:
+the sifive_unleashed_defconfig with similar commands as described above for
+Linux:
.. code-block:: bash
$ export CROSS_COMPILE=riscv64-linux-
$ export OPENSBI=/path/to/opensbi-riscv64-generic-fw_dynamic.bin
- $ make sifive_fu540_defconfig
+ $ make sifive_unleashed_defconfig
You will get spl/u-boot-spl.bin and u-boot.itb file in the build tree.
@@ -313,31 +314,29 @@ board on QEMU ``sifive_u`` machine out of the box. This allows users to
develop and test the recommended RISC-V boot flow with a real world use
case: ZSBL (in QEMU) loads U-Boot SPL from SD card or SPI flash to L2LIM,
then U-Boot SPL loads the combined payload image of OpenSBI fw_dynamic
-firmware and U-Boot proper. However sometimes we want to have a quick test
-of booting U-Boot on QEMU without the needs of preparing the SPI flash or
-SD card images, an alternate way can be used, which is to create a U-Boot
-S-mode image by modifying the configuration of U-Boot:
+firmware and U-Boot proper.
+
+However sometimes we want to have a quick test of booting U-Boot on QEMU
+without the needs of preparing the SPI flash or SD card images, an alternate
+way can be used, which is to create a U-Boot S-mode image by modifying the
+configuration of U-Boot:
.. code-block:: bash
+ $ export CROSS_COMPILE=riscv64-linux-
+ $ make sifive_unleashed_defconfig
$ make menuconfig
-then manually select the following configuration in U-Boot:
-
- Device Tree Control > Provider of DTB for DT Control > Prior Stage bootloader DTB
+then manually select the following configuration:
-This lets U-Boot to use the QEMU generated device tree blob. During the build,
-a build error will be seen below:
+ * Device Tree Control ---> Provider of DTB for DT Control ---> Prior Stage bootloader DTB
-.. code-block:: none
+and unselect the following configuration:
- MKIMAGE u-boot.img
- ./tools/mkimage: Can't open arch/riscv/dts/hifive-unleashed-a00.dtb: No such file or directory
- ./tools/mkimage: failed to build FIT
- make: *** [Makefile:1440: u-boot.img] Error 1
+ * Library routines ---> Allow access to binman information in the device tree
-The above errors can be safely ignored as we don't run U-Boot SPL under QEMU
-in this alternate configuration.
+This changes U-Boot to use the QEMU generated device tree blob, and bypass
+running the U-Boot SPL stage.
Boot the 64-bit U-Boot S-mode image directly:
@@ -352,14 +351,18 @@ It's possible to create a 32-bit U-Boot S-mode image as well.
.. code-block:: bash
$ export CROSS_COMPILE=riscv64-linux-
- $ make sifive_fu540_defconfig
+ $ make sifive_unleashed_defconfig
$ make menuconfig
then manually update the following configuration in U-Boot:
- Device Tree Control > Provider of DTB for DT Control > Prior Stage bootloader DTB
- RISC-V architecture > Base ISA > RV32I
- Boot images > Text Base > 0x80400000
+ * Device Tree Control ---> Provider of DTB for DT Control ---> Prior Stage bootloader DTB
+ * RISC-V architecture ---> Base ISA ---> RV32I
+ * Boot options ---> Boot images ---> Text Base ---> 0x80400000
+
+and unselect the following configuration:
+
+ * Library routines ---> Allow access to binman information in the device tree
Use the same command line options to boot the 32-bit U-Boot S-mode image:
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PULL v2 19/21] target/riscv: Backup/restore mstatus.SD bit when virtual register swapped
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
` (17 preceding siblings ...)
2021-09-21 6:54 ` [PULL v2 18/21] docs/system/riscv: sifive_u: Update U-Boot instructions Alistair Francis
@ 2021-09-21 6:54 ` Alistair Francis
2021-09-21 6:54 ` [PULL v2 20/21] target/riscv: csr: Rename HCOUNTEREN_CY and friends Alistair Francis
` (2 subsequent siblings)
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:54 UTC (permalink / raw)
To: qemu-devel, peter.maydell
Cc: alistair23, Frank Chang, Vincent Chen, Alistair Francis
From: Frank Chang <frank.chang@sifive.com>
When virtual registers are swapped, mstatus.SD bit should also be
backed up/restored. Otherwise, mstatus.SD bit will be incorrectly kept
across the world switches.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210914013717.881430-1-frank.chang@sifive.com
[ Changes by AF:
- Convert variable to a uint64_t to fix clang error
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
target/riscv/cpu_helper.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c
index 701858d670..d41d5cd27c 100644
--- a/target/riscv/cpu_helper.c
+++ b/target/riscv/cpu_helper.c
@@ -106,9 +106,10 @@ bool riscv_cpu_fp_enabled(CPURISCVState *env)
void riscv_cpu_swap_hypervisor_regs(CPURISCVState *env)
{
+ uint64_t sd = riscv_cpu_is_32bit(env) ? MSTATUS32_SD : MSTATUS64_SD;
uint64_t mstatus_mask = MSTATUS_MXR | MSTATUS_SUM | MSTATUS_FS |
MSTATUS_SPP | MSTATUS_SPIE | MSTATUS_SIE |
- MSTATUS64_UXL;
+ MSTATUS64_UXL | sd;
bool current_virt = riscv_cpu_virt_enabled(env);
g_assert(riscv_has_ext(env, RVH));
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PULL v2 20/21] target/riscv: csr: Rename HCOUNTEREN_CY and friends
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
` (18 preceding siblings ...)
2021-09-21 6:54 ` [PULL v2 19/21] target/riscv: Backup/restore mstatus.SD bit when virtual register swapped Alistair Francis
@ 2021-09-21 6:54 ` Alistair Francis
2021-09-21 6:54 ` [PULL v2 21/21] hw/riscv: opentitan: Correct the USB Dev address Alistair Francis
2021-09-21 20:49 ` [PULL v2 00/21] riscv-to-apply queue Richard Henderson
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:54 UTC (permalink / raw)
To: qemu-devel, peter.maydell; +Cc: alistair23, Bin Meng, Alistair Francis
From: Bin Meng <bmeng.cn@gmail.com>
The macro name HCOUNTEREN_CY suggests it is for CSR HCOUNTEREN, but
in fact it applies to M-mode and S-mode CSR too. Rename these macros
to have the COUNTEREN_ prefix.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210915084601.24304-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
target/riscv/cpu_bits.h | 8 ++++----
target/riscv/csr.c | 24 ++++++++++++------------
2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h
index ce9dcc030c..999187a9ee 100644
--- a/target/riscv/cpu_bits.h
+++ b/target/riscv/cpu_bits.h
@@ -397,10 +397,10 @@
#define HSTATUS32_WPRI 0xFF8FF87E
#define HSTATUS64_WPRI 0xFFFFFFFFFF8FF87EULL
-#define HCOUNTEREN_CY (1 << 0)
-#define HCOUNTEREN_TM (1 << 1)
-#define HCOUNTEREN_IR (1 << 2)
-#define HCOUNTEREN_HPM3 (1 << 3)
+#define COUNTEREN_CY (1 << 0)
+#define COUNTEREN_TM (1 << 1)
+#define COUNTEREN_IR (1 << 2)
+#define COUNTEREN_HPM3 (1 << 3)
/* Privilege modes */
#define PRV_U 0
diff --git a/target/riscv/csr.c b/target/riscv/csr.c
index ba9818f6a5..23fbbd3216 100644
--- a/target/riscv/csr.c
+++ b/target/riscv/csr.c
@@ -71,20 +71,20 @@ static RISCVException ctr(CPURISCVState *env, int csrno)
if (riscv_cpu_virt_enabled(env)) {
switch (csrno) {
case CSR_CYCLE:
- if (!get_field(env->hcounteren, HCOUNTEREN_CY) &&
- get_field(env->mcounteren, HCOUNTEREN_CY)) {
+ if (!get_field(env->hcounteren, COUNTEREN_CY) &&
+ get_field(env->mcounteren, COUNTEREN_CY)) {
return RISCV_EXCP_VIRT_INSTRUCTION_FAULT;
}
break;
case CSR_TIME:
- if (!get_field(env->hcounteren, HCOUNTEREN_TM) &&
- get_field(env->mcounteren, HCOUNTEREN_TM)) {
+ if (!get_field(env->hcounteren, COUNTEREN_TM) &&
+ get_field(env->mcounteren, COUNTEREN_TM)) {
return RISCV_EXCP_VIRT_INSTRUCTION_FAULT;
}
break;
case CSR_INSTRET:
- if (!get_field(env->hcounteren, HCOUNTEREN_IR) &&
- get_field(env->mcounteren, HCOUNTEREN_IR)) {
+ if (!get_field(env->hcounteren, COUNTEREN_IR) &&
+ get_field(env->mcounteren, COUNTEREN_IR)) {
return RISCV_EXCP_VIRT_INSTRUCTION_FAULT;
}
break;
@@ -98,20 +98,20 @@ static RISCVException ctr(CPURISCVState *env, int csrno)
if (riscv_cpu_is_32bit(env)) {
switch (csrno) {
case CSR_CYCLEH:
- if (!get_field(env->hcounteren, HCOUNTEREN_CY) &&
- get_field(env->mcounteren, HCOUNTEREN_CY)) {
+ if (!get_field(env->hcounteren, COUNTEREN_CY) &&
+ get_field(env->mcounteren, COUNTEREN_CY)) {
return RISCV_EXCP_VIRT_INSTRUCTION_FAULT;
}
break;
case CSR_TIMEH:
- if (!get_field(env->hcounteren, HCOUNTEREN_TM) &&
- get_field(env->mcounteren, HCOUNTEREN_TM)) {
+ if (!get_field(env->hcounteren, COUNTEREN_TM) &&
+ get_field(env->mcounteren, COUNTEREN_TM)) {
return RISCV_EXCP_VIRT_INSTRUCTION_FAULT;
}
break;
case CSR_INSTRETH:
- if (!get_field(env->hcounteren, HCOUNTEREN_IR) &&
- get_field(env->mcounteren, HCOUNTEREN_IR)) {
+ if (!get_field(env->hcounteren, COUNTEREN_IR) &&
+ get_field(env->mcounteren, COUNTEREN_IR)) {
return RISCV_EXCP_VIRT_INSTRUCTION_FAULT;
}
break;
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PULL v2 21/21] hw/riscv: opentitan: Correct the USB Dev address
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
` (19 preceding siblings ...)
2021-09-21 6:54 ` [PULL v2 20/21] target/riscv: csr: Rename HCOUNTEREN_CY and friends Alistair Francis
@ 2021-09-21 6:54 ` Alistair Francis
2021-09-21 20:49 ` [PULL v2 00/21] riscv-to-apply queue Richard Henderson
21 siblings, 0 replies; 23+ messages in thread
From: Alistair Francis @ 2021-09-21 6:54 UTC (permalink / raw)
To: qemu-devel, peter.maydell; +Cc: alistair23, Alistair Francis, Bin Meng
From: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: d6cb4dfe75a2f536f217d7075b750ece3acb1535.1631767043.git.alistair.francis@wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
hw/riscv/opentitan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c
index f7cfcf1c3a..9803ae6d70 100644
--- a/hw/riscv/opentitan.c
+++ b/hw/riscv/opentitan.c
@@ -39,12 +39,12 @@ static const MemMapEntry ibex_memmap[] = {
[IBEX_DEV_TIMER] = { 0x40100000, 0x1000 },
[IBEX_DEV_SENSOR_CTRL] = { 0x40110000, 0x1000 },
[IBEX_DEV_OTP_CTRL] = { 0x40130000, 0x4000 },
+ [IBEX_DEV_USBDEV] = { 0x40150000, 0x1000 },
[IBEX_DEV_PWRMGR] = { 0x40400000, 0x1000 },
[IBEX_DEV_RSTMGR] = { 0x40410000, 0x1000 },
[IBEX_DEV_CLKMGR] = { 0x40420000, 0x1000 },
[IBEX_DEV_PINMUX] = { 0x40460000, 0x1000 },
[IBEX_DEV_PADCTRL] = { 0x40470000, 0x1000 },
- [IBEX_DEV_USBDEV] = { 0x40500000, 0x1000 },
[IBEX_DEV_FLASH_CTRL] = { 0x41000000, 0x1000 },
[IBEX_DEV_PLIC] = { 0x41010000, 0x1000 },
[IBEX_DEV_AES] = { 0x41100000, 0x1000 },
--
2.31.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* Re: [PULL v2 00/21] riscv-to-apply queue
2021-09-21 6:53 [PULL v2 00/21] riscv-to-apply queue Alistair Francis
` (20 preceding siblings ...)
2021-09-21 6:54 ` [PULL v2 21/21] hw/riscv: opentitan: Correct the USB Dev address Alistair Francis
@ 2021-09-21 20:49 ` Richard Henderson
21 siblings, 0 replies; 23+ messages in thread
From: Richard Henderson @ 2021-09-21 20:49 UTC (permalink / raw)
To: Alistair Francis, qemu-devel, peter.maydell; +Cc: alistair23, Alistair Francis
On 9/20/21 11:53 PM, Alistair Francis wrote:
> From: Alistair Francis <alistair.francis@wdc.com>
>
> The following changes since commit 326ff8dd09556fc2e257196c49f35009700794ac:
>
> Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging (2021-09-20 16:17:05 +0100)
>
> are available in the Git repository at:
>
> git@github.com:alistair23/qemu.git tags/pull-riscv-to-apply-20210921
>
> for you to fetch changes up to ed481d9837250aa682f5156528bc923e1b214f76:
>
> hw/riscv: opentitan: Correct the USB Dev address (2021-09-21 12:10:47 +1000)
>
> ----------------------------------------------------------------
> Second RISC-V PR for QEMU 6.2
>
> - ePMP CSR address updates
> - Convert internal interrupts to use QEMU GPIO lines
> - SiFive PWM support
> - Support for RISC-V ACLINT
> - SiFive PDMA fixes
> - Update to u-boot instructions for sifive_u
> - mstatus.SD bug fix for hypervisor extensions
> - OpenTitan fix for USB dev address
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/6.2
for any user-visible changes.
r~
^ permalink raw reply [flat|nested] 23+ messages in thread