[PATCH 0/5] xhci fixes for usb-linus

[PATCH 0/5] xhci fixes for usb-linus

[Mathias Nyman]

Hi Greg

A few xhci fixes for 5.15-rc.
A couple races fixed, and quirks added for a couple hosts.

Thanks
-Mathias


Johan Hovold (1):
  USB: xhci: dbc: fix tty registration race

Jonathan Bell (2):
  xhci: guard accesses to ep_state in xhci_endpoint_reset()
  xhci: add quirk for host controllers that don't update endpoint DCS

Nikolay Martynov (1):
  xhci: Enable trust tx length quirk for Fresco FL11 USB controller

Pavankumar Kondeti (1):
  xhci: Fix command ring pointer corruption while aborting a command

 drivers/usb/host/xhci-dbgtty.c | 28 ++++++++++++------------
 drivers/usb/host/xhci-pci.c    |  6 +++++-
 drivers/usb/host/xhci-ring.c   | 39 +++++++++++++++++++++++++++++-----
 drivers/usb/host/xhci.c        |  5 +++++
 drivers/usb/host/xhci.h        |  1 +
 5 files changed, 58 insertions(+), 21 deletions(-)

-- 
2.25.1

[PATCH 1/5] xhci: guard accesses to ep_state in xhci_endpoint_reset()

[Mathias Nyman]

From: Jonathan Bell <jonathan@raspberrypi.com>

See https://github.com/raspberrypi/linux/issues/3981

Two read-modify-write cycles on ep->ep_state are not guarded by
xhci->lock. Fix these.

Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 93c38b557afd..541fe4dcc43a 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3214,10 +3214,13 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd,
 		return;
 
 	/* Bail out if toggle is already being cleared by a endpoint reset */
+	spin_lock_irqsave(&xhci->lock, flags);
 	if (ep->ep_state & EP_HARD_CLEAR_TOGGLE) {
 		ep->ep_state &= ~EP_HARD_CLEAR_TOGGLE;
+		spin_unlock_irqrestore(&xhci->lock, flags);
 		return;
 	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
 	/* Only interrupt and bulk ep's use data toggle, USB2 spec 5.5.4-> */
 	if (usb_endpoint_xfer_control(&host_ep->desc) ||
 	    usb_endpoint_xfer_isoc(&host_ep->desc))
@@ -3303,8 +3306,10 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd,
 	xhci_free_command(xhci, cfg_cmd);
 cleanup:
 	xhci_free_command(xhci, stop_cmd);
+	spin_lock_irqsave(&xhci->lock, flags);
 	if (ep->ep_state & EP_SOFT_CLEAR_TOGGLE)
 		ep->ep_state &= ~EP_SOFT_CLEAR_TOGGLE;
+	spin_unlock_irqrestore(&xhci->lock, flags);
 }
 
 static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,
-- 
2.25.1

[PATCH 2/5] xhci: add quirk for host controllers that don't update endpoint DCS

[Mathias Nyman]

From: Jonathan Bell <jonathan@raspberrypi.org>

Seen on a VLI VL805 PCIe to USB controller. For non-stream endpoints
at least, if the xHC halts on a particular TRB due to an error then
the DCS field in the Out Endpoint Context maintained by the hardware
is not updated with the current cycle state.

Using the quirk XHCI_EP_CTX_BROKEN_DCS and instead fetch the DCS bit
from the TRB that the xHC stopped on.

[ bjorn: rebased to v5.14-rc2 ]
Cc: stable@vger.kernel.org
Link: https://github.com/raspberrypi/linux/issues/3060
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-pci.c  |  4 +++-
 drivers/usb/host/xhci-ring.c | 25 ++++++++++++++++++++++++-
 drivers/usb/host/xhci.h      |  1 +
 3 files changed, 28 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 2c9f25ca8edd..633413d78380 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -279,8 +279,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 			pdev->device == 0x3432)
 		xhci->quirks |= XHCI_BROKEN_STREAMS;
 
-	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483)
+	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) {
 		xhci->quirks |= XHCI_LPM_SUPPORT;
+		xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS;
+	}
 
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
 		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index e676749f543b..7dbd26a9bc24 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -559,8 +559,11 @@ static int xhci_move_dequeue_past_td(struct xhci_hcd *xhci,
 	struct xhci_ring *ep_ring;
 	struct xhci_command *cmd;
 	struct xhci_segment *new_seg;
+	struct xhci_segment *halted_seg = NULL;
 	union xhci_trb *new_deq;
 	int new_cycle;
+	union xhci_trb *halted_trb;
+	int index = 0;
 	dma_addr_t addr;
 	u64 hw_dequeue;
 	bool cycle_found = false;
@@ -598,7 +601,27 @@ static int xhci_move_dequeue_past_td(struct xhci_hcd *xhci,
 	hw_dequeue = xhci_get_hw_deq(xhci, dev, ep_index, stream_id);
 	new_seg = ep_ring->deq_seg;
 	new_deq = ep_ring->dequeue;
-	new_cycle = hw_dequeue & 0x1;
+
+	/*
+	 * Quirk: xHC write-back of the DCS field in the hardware dequeue
+	 * pointer is wrong - use the cycle state of the TRB pointed to by
+	 * the dequeue pointer.
+	 */
+	if (xhci->quirks & XHCI_EP_CTX_BROKEN_DCS &&
+	    !(ep->ep_state & EP_HAS_STREAMS))
+		halted_seg = trb_in_td(xhci, td->start_seg,
+				       td->first_trb, td->last_trb,
+				       hw_dequeue & ~0xf, false);
+	if (halted_seg) {
+		index = ((dma_addr_t)(hw_dequeue & ~0xf) - halted_seg->dma) /
+			 sizeof(*halted_trb);
+		halted_trb = &halted_seg->trbs[index];
+		new_cycle = halted_trb->generic.field[3] & 0x1;
+		xhci_dbg(xhci, "Endpoint DCS = %d TRB index = %d cycle = %d\n",
+			 (u8)(hw_dequeue & 0x1), index, new_cycle);
+	} else {
+		new_cycle = hw_dequeue & 0x1;
+	}
 
 	/*
 	 * We want to find the pointer, segment and cycle state of the new trb
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index dca6181c33fd..5a75fe563123 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1899,6 +1899,7 @@ struct xhci_hcd {
 #define XHCI_SG_TRB_CACHE_SIZE_QUIRK	BIT_ULL(39)
 #define XHCI_NO_SOFT_RETRY	BIT_ULL(40)
 #define XHCI_BROKEN_D3COLD	BIT_ULL(41)
+#define XHCI_EP_CTX_BROKEN_DCS	BIT_ULL(42)
 
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
-- 
2.25.1

[PATCH 3/5] USB: xhci: dbc: fix tty registration race

[Mathias Nyman]

From: Johan Hovold <johan@kernel.org>

Make sure to allocate resources before registering the tty device to
avoid having a racing open() and write() fail to enable rx or
dereference a NULL pointer when accessing the uninitialised fifo.

Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Cc: stable@vger.kernel.org      # 4.16
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-dbgtty.c | 28 +++++++++++++---------------
 1 file changed, 13 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c
index 6e784f2fc26d..eb46e642e87a 100644
--- a/drivers/usb/host/xhci-dbgtty.c
+++ b/drivers/usb/host/xhci-dbgtty.c
@@ -408,40 +408,38 @@ static int xhci_dbc_tty_register_device(struct xhci_dbc *dbc)
 		return -EBUSY;
 
 	xhci_dbc_tty_init_port(dbc, port);
-	tty_dev = tty_port_register_device(&port->port,
-					   dbc_tty_driver, 0, NULL);
-	if (IS_ERR(tty_dev)) {
-		ret = PTR_ERR(tty_dev);
-		goto register_fail;
-	}
 
 	ret = kfifo_alloc(&port->write_fifo, DBC_WRITE_BUF_SIZE, GFP_KERNEL);
 	if (ret)
-		goto buf_alloc_fail;
+		goto err_exit_port;
 
 	ret = xhci_dbc_alloc_requests(dbc, BULK_IN, &port->read_pool,
 				      dbc_read_complete);
 	if (ret)
-		goto request_fail;
+		goto err_free_fifo;
 
 	ret = xhci_dbc_alloc_requests(dbc, BULK_OUT, &port->write_pool,
 				      dbc_write_complete);
 	if (ret)
-		goto request_fail;
+		goto err_free_requests;
+
+	tty_dev = tty_port_register_device(&port->port,
+					   dbc_tty_driver, 0, NULL);
+	if (IS_ERR(tty_dev)) {
+		ret = PTR_ERR(tty_dev);
+		goto err_free_requests;
+	}
 
 	port->registered = true;
 
 	return 0;
 
-request_fail:
+err_free_requests:
 	xhci_dbc_free_requests(&port->read_pool);
 	xhci_dbc_free_requests(&port->write_pool);
+err_free_fifo:
 	kfifo_free(&port->write_fifo);
-
-buf_alloc_fail:
-	tty_unregister_device(dbc_tty_driver, 0);
-
-register_fail:
+err_exit_port:
 	xhci_dbc_tty_exit_port(port);
 
 	dev_err(dbc->dev, "can't register tty port, err %d\n", ret);
-- 
2.25.1

[PATCH 4/5] xhci: Fix command ring pointer corruption while aborting a command

[Mathias Nyman]

From: Pavankumar Kondeti <pkondeti@codeaurora.org>

The command ring pointer is located at [6:63] bits of the command
ring control register (CRCR). All the control bits like command stop,
abort are located at [0:3] bits. While aborting a command, we read the
CRCR and set the abort bit and write to the CRCR. The read will always
give command ring pointer as all zeros. So we essentially write only
the control bits. Since we split the 64 bit write into two 32 bit writes,
there is a possibility of xHC command ring stopped before the upper
dword (all zeros) is written. If that happens, xHC updates the upper
dword of its internal command ring pointer with all zeros. Next time,
when the command ring is restarted, we see xHC memory access failures.
Fix this issue by only writing to the lower dword of CRCR where all
control bits are located.

Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-ring.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 7dbd26a9bc24..311597bba80e 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -366,16 +366,22 @@ static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
 /* Must be called with xhci->lock held, releases and aquires lock back */
 static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
 {
-	u64 temp_64;
+	u32 temp_32;
 	int ret;
 
 	xhci_dbg(xhci, "Abort command ring\n");
 
 	reinit_completion(&xhci->cmd_ring_stop_completion);
 
-	temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
-	xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
-			&xhci->op_regs->cmd_ring);
+	/*
+	 * The control bits like command stop, abort are located in lower
+	 * dword of the command ring control register. Limit the write
+	 * to the lower dword to avoid corrupting the command ring pointer
+	 * in case if the command ring is stopped by the time upper dword
+	 * is written.
+	 */
+	temp_32 = readl(&xhci->op_regs->cmd_ring);
+	writel(temp_32 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
 
 	/* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the
 	 * completion of the Command Abort operation. If CRR is not negated in 5
-- 
2.25.1

Re: [PATCH 4/5] xhci: Fix command ring pointer corruption while aborting a command

[youling257]

This patch cause suspend to disk resume usb not work, xhci_hcd 0000:00:14.0: Abort failed to stop command ring: -110.

[  189.292054] PM: hibernation: hibernation entry
[  189.295273] Filesystems sync: 0.000 seconds
[  189.295281] Freezing user space processes ... (elapsed 0.003 seconds) done.
[  189.298514] OOM killer disabled.
[  189.298590] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff]
[  189.298594] PM: hibernation: Marking nosave pages: [mem 0x00058000-0x00058fff]
[  189.298596] PM: hibernation: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[  189.298600] PM: hibernation: Marking nosave pages: [mem 0x00500000-0x005fffff]
[  189.298607] PM: hibernation: Marking nosave pages: [mem 0x850d7000-0x850d8fff]
[  189.298609] PM: hibernation: Marking nosave pages: [mem 0x8805d000-0x8809bfff]
[  189.298612] PM: hibernation: Marking nosave pages: [mem 0x8ac24000-0x8ac24fff]
[  189.298614] PM: hibernation: Marking nosave pages: [mem 0x8bea8000-0x8caeefff]
[  189.298689] PM: hibernation: Marking nosave pages: [mem 0x8cb9a000-0x8d3fefff]
[  189.298741] PM: hibernation: Marking nosave pages: [mem 0x8d400000-0xffffffff]
[  189.300918] PM: hibernation: Basic memory bitmaps created
[  189.301088] PM: hibernation: Preallocating image memory
[  189.812115] PM: hibernation: Allocated 779311 pages for snapshot
[  189.812118] PM: hibernation: Allocated 3117244 kbytes in 0.51 seconds (6112.24 MB/s)
[  189.812121] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  189.813884] printk: Suspending console(s) (use no_console_suspend to debug)
[  189.814016] wlan0: deauthenticating from b4:a8:98:22:f9:ac by local choice (Reason: 3=DEAUTH_LEAVING)
[  189.814310] rtc_cmos 00:05: suspend, ctrl 02
[  189.844670] r8169 0000:01:00.0 eth0: Link is Down
[  190.081522] ACPI: PM: Preparing to enter system sleep state S4
[  190.083051] ACPI: PM: Saving platform NVS memory
[  190.087556] Disabling non-boot CPUs ...
[  190.089802] smpboot: CPU 1 is now offline
[  190.092841] smpboot: CPU 2 is now offline
[  190.095235] smpboot: CPU 3 is now offline
[  190.098592] smpboot: CPU 4 is now offline
[  190.100660] smpboot: CPU 5 is now offline
[  190.102967] smpboot: CPU 6 is now offline
[  190.105047] smpboot: CPU 7 is now offline
[  190.106828] PM: hibernation: Creating image:
[  190.211897] PM: hibernation: Need to copy 775681 pages
[  190.211898] PM: hibernation: Normal pages needed: 775681 + 1024, available pages: 1300224
[  190.107012] ACPI: PM: Restoring platform NVS memory
[  190.108184] Enabling non-boot CPUs ...
[  190.108225] x86: Booting SMP configuration:
[  190.108225] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  190.109416] CPU1 is up
[  190.109440] smpboot: Booting Node 0 Processor 2 APIC 0x4
[  190.110088] CPU2 is up
[  190.110111] smpboot: Booting Node 0 Processor 3 APIC 0x6
[  190.110775] CPU3 is up
[  190.110799] smpboot: Booting Node 0 Processor 4 APIC 0x1
[  190.111532] CPU4 is up
[  190.111558] smpboot: Booting Node 0 Processor 5 APIC 0x3
[  190.112280] CPU5 is up
[  190.112303] smpboot: Booting Node 0 Processor 6 APIC 0x5
[  190.113056] CPU6 is up
[  190.113084] smpboot: Booting Node 0 Processor 7 APIC 0x7
[  190.113886] CPU7 is up
[  190.116276] ACPI: PM: Waking up from system sleep state S4
[  190.187264] usb usb1: root hub lost power or was reset
[  190.187296] usb usb2: root hub lost power or was reset
[  190.188384] rtc_cmos 00:05: resume, ctrl 02
[  190.189946] i915 0000:00:02.0: [drm] [ENCODER:94:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[  190.195185] nvme nvme0: 8/0/0 default/read/poll queues
[  190.354168] r8169 0000:01:00.0 eth0: Link is Down
[  190.526336] ata3: SATA link down (SStatus 4 SControl 300)
[  190.526389] ata4: SATA link down (SStatus 4 SControl 300)
[  191.214037] snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x206f0015
[  191.214047] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last cmd=0x206f0015
[  191.214054] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last cmd=0x206f0015
[  191.214058] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last cmd=0x206f0015
[  191.214061] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last cmd=0x206f0015
[  191.214064] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last cmd=0x206f0015
[  191.214067] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last cmd=0x206f0015
[  191.214070] snd_hda_intel 0000:00:1f.3: spurious response 0x200:0x2, last cmd=0x206f0015
[  191.214073] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last cmd=0x206f0015
[  191.214076] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last cmd=0x206f0015
[  191.214079] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last cmd=0x206f0015
[  192.216095] snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x20670100
[  193.218095] snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to single_cmd mode: last cmd=0x20670100
[  193.547924] r8169 0000:01:00.0 eth0: Link is Up - 1Gbps/Full - flow control off
[  200.640141] xhci_hcd 0000:00:14.0: Abort failed to stop command ring: -110
[  200.640148] xhci_hcd 0000:00:14.0: xHCI host controller not responding, assume dead
[  200.640151] xhci_hcd 0000:00:14.0: HC died; cleaning up
[  200.640165] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  201.056143] usb 2-1: device not accepting address 2, error -22
[  201.058193] PM: hibernation: Basic memory bitmaps freed
[  201.058197] OOM killer enabled.
[  201.058197] Restarting tasks ...
[  201.058212] usb 2-1: USB disconnect, device number 2

Re: [PATCH 4/5] xhci: Fix command ring pointer corruption while aborting a command

[youling 257]

full log.

Welcome to Ubuntu 21.10 (GNU/Linux 5.15.0-rc6-android-x86_64+ i686)

 * Documentation:  https://help.ubuntu.com
 * Management:     https://landscape.canonical.com
 * Support:        https://ubuntu.com/advantage

0 updates can be applied immediately.

Last login: Fri Oct 22 17:27:47 2021 from 192.168.3.3
youling257@localhost:~$ su
密码：
root@localhost:/home/youling257# dmesg
[    0.000000] microcode: microcode updated early to revision 0xde,
date = 2020-05-26
[    0.000000] Linux version 5.15.0-rc6-android-x86_64+
(root@localhost) (gcc (Ubuntu 11.2.0-7ubuntu2) 11.2.0, GNU ld (GNU
Binutils for Ubuntu) 2.37) #1 SMP PREEMPT Mon Oct 18 15:01:27 CST 2021
[    0.000000] Command line: BOOT_IMAGE=/32/kernel root=/dev/ram0
SRC=q mnt=422c65cf-53c6-4e63-8619-298ce0f01129 resume=/dev/nvme0n1p1
resume_offset=65728512 video=2560x1600@60 RAMDISK=1ramdisk.img system=
DATA= androidboot.selinux=permissive buildvariant=userdebug
memmap=1M!5M ramoops.mem_size=1048576 ramoops.ecc=1
ramoops.mem_address=0x00500000 ramoops.console_size=16384
ramoops.ftrace_size=16384 ramoops.pmsg_size=16384
ramoops.record_size=32768 DEBUG=1 quiet loglevel=3
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating
point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is
960 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 2032
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000850d6fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000850d7000-0x00000000850d7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000850d8000-0x00000000850d8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000850d9000-0x000000008bea7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008bea8000-0x000000008caeefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008caef000-0x000000008cb99fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008cb9a000-0x000000008cf3dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008cf3e000-0x000000008d357fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008d358000-0x000000008d3fefff] type 20
[    0.000000] BIOS-e820: [mem 0x000000008d3ff000-0x000000008d3fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000008d400000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] user-defined physical RAM map:
[    0.000000] user: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] user: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] user: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] user: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] user: [mem 0x0000000000100000-0x00000000004fffff] usable
[    0.000000] user: [mem 0x0000000000500000-0x00000000005fffff]
persistent (type 12)
[    0.000000] user: [mem 0x0000000000600000-0x00000000850d6fff] usable
[    0.000000] user: [mem 0x00000000850d7000-0x00000000850d7fff] ACPI NVS
[    0.000000] user: [mem 0x00000000850d8000-0x00000000850d8fff] reserved
[    0.000000] user: [mem 0x00000000850d9000-0x000000008bea7fff] usable
[    0.000000] user: [mem 0x000000008bea8000-0x000000008caeefff] reserved
[    0.000000] user: [mem 0x000000008caef000-0x000000008cb99fff] usable
[    0.000000] user: [mem 0x000000008cb9a000-0x000000008cf3dfff] ACPI NVS
[    0.000000] user: [mem 0x000000008cf3e000-0x000000008d357fff] reserved
[    0.000000] user: [mem 0x000000008d358000-0x000000008d3fefff] type 20
[    0.000000] user: [mem 0x000000008d3ff000-0x000000008d3fffff] usable
[    0.000000] user: [mem 0x000000008d400000-0x000000008fffffff] reserved
[    0.000000] user: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] user: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] user: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] user: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] user: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] user: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] user: [mem 0x0000000100000000-0x000000026effffff] usable
[    0.000000] efi: EFI v2.60 by American Megatrends
[    0.000000] efi: ACPI 2.0=0x8cb9a000 ACPI=0x8cb9a000
SMBIOS=0x8d2b7000 SMBIOS 3.0=0x8d2b6000 ESRT=0x8ac24498
MEMATTR=0x880a0018
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Default string Default string/SKYBAY, BIOS 5.12 03/02/2020
[    0.000000] tsc: Detected 2900.000 MHz processor
[    0.000000] tsc: Detected 2899.886 MHz TSC
[    0.000524] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000527] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000534] last_pfn = 0x26f000 max_arch_pfn = 0x400000000
[    0.000672] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.001511] last_pfn = 0x8d400 max_arch_pfn = 0x400000000
[    0.008101] found SMP MP-table at [mem 0x000fcdc0-0x000fcdcf]
[    0.008109] esrt: Reserving ESRT space from 0x000000008ac24498 to
0x000000008ac244d0.
[    0.008115] e820: update [mem 0x8ac24000-0x8ac24fff] usable ==> reserved
[    0.008128] Using GB pages for direct mapping
[    0.008891] Secure boot disabled
[    0.008892] RAMDISK: [mem 0x371db000-0x378e4fff]
[    0.008895] ACPI: Early table checksum verification disabled
[    0.008897] ACPI: RSDP 0x000000008CB9A000 000024 (v02 ALASKA)
[    0.008901] ACPI: XSDT 0x000000008CB9A0B0 0000DC (v01 ALASKA A M I
  01072009 AMI  00010013)
[    0.008906] ACPI: FACP 0x000000008CBC2840 000114 (v06 ALASKA A M I
  01072009 AMI  00010013)
[    0.008911] ACPI: DSDT 0x000000008CB9A220 028620 (v02 ALASKA A M I
  01072009 INTL 20160422)
[    0.008913] ACPI: FACS 0x000000008CF3DF00 000040
[    0.008915] ACPI: APIC 0x000000008CBC2958 0000BC (v03 ALASKA A M I
  01072009 AMI  00010013)
[    0.008918] ACPI: FPDT 0x000000008CBC2A18 000044 (v01 ALASKA A M I
  01072009 AMI  00010013)
[    0.008920] ACPI: FIDT 0x000000008CBC2A60 00009C (v01 ALASKA A M I
  01072009 AMI  00010013)
[    0.008923] ACPI: MCFG 0x000000008CBC2B00 00003C (v01 ALASKA A M I
  01072009 MSFT 00000097)
[    0.008925] ACPI: SSDT 0x000000008CBC2B40 000359 (v01 SataRe
SataTabl 00001000 INTL 20160422)
[    0.008928] ACPI: SSDT 0x000000008CBC2EA0 003164 (v02 SaSsdt SaSsdt
  00003000 INTL 20160422)
[    0.008930] ACPI: HPET 0x000000008CBC6008 000038 (v01 INTEL  KBL
  00000001 MSFT 0000005F)
[    0.008933] ACPI: SSDT 0x000000008CBC6040 000DE5 (v02 INTEL
Ther_Rvp 00001000 INTL 20160422)
[    0.008935] ACPI: SSDT 0x000000008CBC6E28 0008FE (v02 INTEL
xh_rvp11 00000000 INTL 20160422)
[    0.008938] ACPI: UEFI 0x000000008CBC7728 000042 (v01 ALASKA A M I
  00000002      01000013)
[    0.008940] ACPI: SSDT 0x000000008CBC7770 000EDE (v02 CpuRef
CpuSsdt  00003000 INTL 20160422)
[    0.008942] ACPI: LPIT 0x000000008CBC8650 000094 (v01 INTEL  KBL
  00000000 MSFT 0000005F)
[    0.008945] ACPI: SSDT 0x000000008CBC86E8 000141 (v02 INTEL  HdaDsp
  00000000 INTL 20160422)
[    0.008947] ACPI: SSDT 0x000000008CBC8830 00029F (v02 INTEL
sensrhub 00000000 INTL 20160422)
[    0.008950] ACPI: SSDT 0x000000008CBC8AD0 003002 (v02 INTEL
PtidDevc 00001000 INTL 20160422)
[    0.008952] ACPI: SSDT 0x000000008CBCBAD8 000517 (v02 INTEL
TbtTypeC 00000000 INTL 20160422)
[    0.008955] ACPI: DBGP 0x000000008CBCBFF0 000034 (v01 INTEL
  00000002 MSFT 0000005F)
[    0.008957] ACPI: DBG2 0x000000008CBCC028 000054 (v00 INTEL
  00000002 MSFT 0000005F)
[    0.008960] ACPI: DMAR 0x000000008CBCC080 0000CC (v01 INTEL  KBL
  00000001 INTL 00000001)
[    0.008962] ACPI: BGRT 0x000000008CBCC150 000038 (v01 ALASKA A M I
  01072009 AMI  00010013)
[    0.008965] ACPI: ASF! 0x000000008CBCC188 0000A0 (v32 INTEL   HCG
  00000001 TFSM 000F4240)
[    0.008967] ACPI: WSMT 0x000000008CBCC228 000028 (v01 ALASKA A M I
  01072009 AMI  00010013)
[    0.008969] ACPI: Reserving FACP table memory at [mem 0x8cbc2840-0x8cbc2953]
[    0.008971] ACPI: Reserving DSDT table memory at [mem 0x8cb9a220-0x8cbc283f]
[    0.008972] ACPI: Reserving FACS table memory at [mem 0x8cf3df00-0x8cf3df3f]
[    0.008973] ACPI: Reserving APIC table memory at [mem 0x8cbc2958-0x8cbc2a13]
[    0.008974] ACPI: Reserving FPDT table memory at [mem 0x8cbc2a18-0x8cbc2a5b]
[    0.008975] ACPI: Reserving FIDT table memory at [mem 0x8cbc2a60-0x8cbc2afb]
[    0.008975] ACPI: Reserving MCFG table memory at [mem 0x8cbc2b00-0x8cbc2b3b]
[    0.008976] ACPI: Reserving SSDT table memory at [mem 0x8cbc2b40-0x8cbc2e98]
[    0.008977] ACPI: Reserving SSDT table memory at [mem 0x8cbc2ea0-0x8cbc6003]
[    0.008978] ACPI: Reserving HPET table memory at [mem 0x8cbc6008-0x8cbc603f]
[    0.008979] ACPI: Reserving SSDT table memory at [mem 0x8cbc6040-0x8cbc6e24]
[    0.008980] ACPI: Reserving SSDT table memory at [mem 0x8cbc6e28-0x8cbc7725]
[    0.008980] ACPI: Reserving UEFI table memory at [mem 0x8cbc7728-0x8cbc7769]
[    0.008981] ACPI: Reserving SSDT table memory at [mem 0x8cbc7770-0x8cbc864d]
[    0.008982] ACPI: Reserving LPIT table memory at [mem 0x8cbc8650-0x8cbc86e3]
[    0.008983] ACPI: Reserving SSDT table memory at [mem 0x8cbc86e8-0x8cbc8828]
[    0.008984] ACPI: Reserving SSDT table memory at [mem 0x8cbc8830-0x8cbc8ace]
[    0.008985] ACPI: Reserving SSDT table memory at [mem 0x8cbc8ad0-0x8cbcbad1]
[    0.008986] ACPI: Reserving SSDT table memory at [mem 0x8cbcbad8-0x8cbcbfee]
[    0.008987] ACPI: Reserving DBGP table memory at [mem 0x8cbcbff0-0x8cbcc023]
[    0.008987] ACPI: Reserving DBG2 table memory at [mem 0x8cbcc028-0x8cbcc07b]
[    0.008988] ACPI: Reserving DMAR table memory at [mem 0x8cbcc080-0x8cbcc14b]
[    0.008989] ACPI: Reserving BGRT table memory at [mem 0x8cbcc150-0x8cbcc187]
[    0.008990] ACPI: Reserving ASF! table memory at [mem 0x8cbcc188-0x8cbcc227]
[    0.008991] ACPI: Reserving WSMT table memory at [mem 0x8cbcc228-0x8cbcc24f]
[    0.009018] Zone ranges:
[    0.009019]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.009021]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.009022]   Normal   [mem 0x0000000100000000-0x000000026effffff]
[    0.009024] Movable zone start for each node
[    0.009024] Early memory node ranges
[    0.009025]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.009026]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.009027]   node   0: [mem 0x0000000000100000-0x00000000004fffff]
[    0.009028]   node   0: [mem 0x0000000000600000-0x00000000850d6fff]
[    0.009029]   node   0: [mem 0x00000000850d9000-0x000000008bea7fff]
[    0.009030]   node   0: [mem 0x000000008caef000-0x000000008cb99fff]
[    0.009031]   node   0: [mem 0x000000008d3ff000-0x000000008d3fffff]
[    0.009031]   node   0: [mem 0x0000000100000000-0x000000026effffff]
[    0.009033] Initmem setup node 0 [mem 0x0000000000001000-0x000000026effffff]
[    0.009036] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.009038] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.009043] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.009058] On node 0, zone DMA: 256 pages in unavailable ranges
[    0.013678] On node 0, zone DMA32: 2 pages in unavailable ranges
[    0.013714] On node 0, zone DMA32: 3143 pages in unavailable ranges
[    0.013738] On node 0, zone DMA32: 2149 pages in unavailable ranges
[    0.027324] On node 0, zone Normal: 11264 pages in unavailable ranges
[    0.027356] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.027366] Reserving Intel graphics memory at [mem 0x8e000000-0x8fffffff]
[    0.027672] ACPI: PM-Timer IO Port: 0x1808
[    0.027677] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.027679] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.027679] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.027680] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.027681] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.027681] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.027682] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.027683] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.027709] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.027711] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.027713] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.027716] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.027717] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.027724] e820: update [mem 0x8805d000-0x8809bfff] usable ==> reserved
[    0.027733] TSC deadline timer available
[    0.027733] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.027757] PM: hibernation: Registered nosave memory: [mem
0x00000000-0x00000fff]
[    0.027759] PM: hibernation: Registered nosave memory: [mem
0x00058000-0x00058fff]
[    0.027761] PM: hibernation: Registered nosave memory: [mem
0x0009f000-0x000fffff]
[    0.027763] PM: hibernation: Registered nosave memory: [mem
0x00500000-0x005fffff]
[    0.027765] PM: hibernation: Registered nosave memory: [mem
0x850d7000-0x850d7fff]
[    0.027766] PM: hibernation: Registered nosave memory: [mem
0x850d8000-0x850d8fff]
[    0.027767] PM: hibernation: Registered nosave memory: [mem
0x8805d000-0x8809bfff]
[    0.027769] PM: hibernation: Registered nosave memory: [mem
0x8ac24000-0x8ac24fff]
[    0.027771] PM: hibernation: Registered nosave memory: [mem
0x8bea8000-0x8caeefff]
[    0.027773] PM: hibernation: Registered nosave memory: [mem
0x8cb9a000-0x8cf3dfff]
[    0.027773] PM: hibernation: Registered nosave memory: [mem
0x8cf3e000-0x8d357fff]
[    0.027774] PM: hibernation: Registered nosave memory: [mem
0x8d358000-0x8d3fefff]
[    0.027776] PM: hibernation: Registered nosave memory: [mem
0x8d400000-0x8fffffff]
[    0.027777] PM: hibernation: Registered nosave memory: [mem
0x90000000-0xdfffffff]
[    0.027777] PM: hibernation: Registered nosave memory: [mem
0xe0000000-0xefffffff]
[    0.027778] PM: hibernation: Registered nosave memory: [mem
0xf0000000-0xfdffffff]
[    0.027779] PM: hibernation: Registered nosave memory: [mem
0xfe000000-0xfe010fff]
[    0.027779] PM: hibernation: Registered nosave memory: [mem
0xfe011000-0xfebfffff]
[    0.027780] PM: hibernation: Registered nosave memory: [mem
0xfec00000-0xfec00fff]
[    0.027781] PM: hibernation: Registered nosave memory: [mem
0xfec01000-0xfecfffff]
[    0.027781] PM: hibernation: Registered nosave memory: [mem
0xfed00000-0xfed00fff]
[    0.027782] PM: hibernation: Registered nosave memory: [mem
0xfed01000-0xfedfffff]
[    0.027782] PM: hibernation: Registered nosave memory: [mem
0xfee00000-0xfee00fff]
[    0.027783] PM: hibernation: Registered nosave memory: [mem
0xfee01000-0xfeffffff]
[    0.027784] PM: hibernation: Registered nosave memory: [mem
0xff000000-0xffffffff]
[    0.027785] [mem 0x90000000-0xdfffffff] available for PCI devices
[    0.027786] Booting paravirtualized kernel on bare hardware
[    0.027788] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.032592] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8
nr_node_ids:1
[    0.032771] percpu: Embedded 50 pages/cpu s167936 r8192 d28672 u262144
[    0.032782] pcpu-alloc: s167936 r8192 d28672 u262144 alloc=1*2097152
[    0.032784] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.032812] Built 1 zonelists, mobility grouping on.  Total pages: 2043545
[    0.032814] Kernel command line: BOOT_IMAGE=/32/kernel
root=/dev/ram0 SRC=q mnt=422c65cf-53c6-4e63-8619-298ce0f01129
resume=/dev/nvme0n1p1 resume_offset=65728512 video=2560x1600@60
RAMDISK=1ramdisk.img system= DATA= androidboot.selinux=permissive
buildvariant=userdebug memmap=1M!5M ramoops.mem_size=1048576
ramoops.ecc=1 ramoops.mem_address=0x00500000
ramoops.console_size=16384 ramoops.ftrace_size=16384
ramoops.pmsg_size=16384 ramoops.record_size=32768 DEBUG=1 quiet
loglevel=3
[    0.032941] Unknown command line parameters: BOOT_IMAGE=/32/kernel
SRC=q mnt=422c65cf-53c6-4e63-8619-298ce0f01129 RAMDISK=1ramdisk.img
system= DATA= buildvariant=userdebug DEBUG=1
[    0.033399] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes, linear)
[    0.033640] Inode-cache hash table entries: 524288 (order: 10,
4194304 bytes, linear)
[    0.033707] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.066384] Memory: 8009008K/8304572K available (14346K kernel
code, 1870K rwdata, 5512K rodata, 1624K init, 8568K bss, 295304K
reserved, 0K cma-reserved)
[    0.066391] random: get_random_u64 called from
__kmem_cache_create+0x24/0x480 with crng_init=0
[    0.067085] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.067087] kmemleak: Kernel memory leak detector disabled
[    0.067098] Kernel/User page tables isolation: enabled
[    0.067111] ftrace: allocating 43271 entries in 170 pages
[    0.081159] ftrace: allocated 170 pages with 4 groups
[    0.081224] rcu: Preemptible hierarchical RCU implementation.
[    0.081225]  Trampoline variant of Tasks RCU enabled.
[    0.081226]  Rude variant of Tasks RCU enabled.
[    0.081226]  Tracing variant of Tasks RCU enabled.
[    0.081227] rcu: RCU calculated value of scheduler-enlistment delay
is 100 jiffies.
[    0.081880] NR_IRQS: 4352, nr_irqs: 2048, preallocated irqs: 16
[    0.082411] Console: colour dummy device 80x25
[    0.082434] printk: console [tty0] enabled
[    0.082441] ACPI: Core revision 20210730
[    0.082619] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.082620] APIC: Switch to symmetric I/O mode setup
[    0.086406] clocksource: tsc-early: mask: 0xffffffffffffffff
max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns
[    0.086411] Calibrating delay loop (skipped), value calculated
using timer frequency.. 5799.77 BogoMIPS (lpj=2899886)
[    0.086413] pid_max: default: 32768 minimum: 301
[    0.087410] LSM: Security Framework initializing
[    0.087410] SELinux:  Initializing.
[    0.087410] Mount-cache hash table entries: 16384 (order: 5, 131072
bytes, linear)
[    0.087410] Mountpoint-cache hash table entries: 16384 (order: 5,
131072 bytes, linear)
[    0.087410] CPU0: Thermal monitoring enabled (TM1)
[    0.087410] process: using mwait in idle threads
[    0.087410] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.087410] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.087410] Spectre V1 : Mitigation: usercopy/swapgs barriers and
__user pointer sanitization
[    0.087410] Spectre V2 : Mitigation: Full generic retpoline
[    0.087410] Spectre V2 : Spectre v2 / SpectreRSB mitigation:
Filling RSB on context switch
[    0.087410] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.087410] Spectre V2 : mitigation: Enabling conditional Indirect
Branch Prediction Barrier
[    0.087410] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.087410] Speculative Store Bypass: Mitigation: Speculative Store
Bypass disabled via prctl and seccomp
[    0.087410] SRBDS: Mitigation: Microcode
[    0.087410] MDS: Mitigation: Clear CPU buffers
[    0.087410] Freeing SMP alternatives memory: 40K
[    0.087410] smpboot: Estimated ratio of average max frequency by
base frequency (times 1024): 1235
[    0.087410] smpboot: CPU0: Intel(R) Core(TM) i7-7820HK CPU @
2.90GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[    0.087410] Performance Events: PEBS fmt3+, Skylake events, 32-deep
LBR, full-width counters, Intel PMU driver.
[    0.087410] ... version:                4
[    0.087410] ... bit width:              48
[    0.087410] ... generic registers:      4
[    0.087410] ... value mask:             0000ffffffffffff
[    0.087410] ... max period:             00007fffffffffff
[    0.087410] ... fixed-purpose events:   3
[    0.087410] ... event mask:             000000070000000f
[    0.087410] rcu: Hierarchical SRCU implementation.
[    0.087410] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.087410] smp: Bringing up secondary CPUs ...
[    0.087410] x86: Booting SMP configuration:
[    0.087410] .... node  #0, CPUs:      #1 #2 #3 #4
[    0.094718] MDS CPU bug present and SMT on, data leak possible. See
https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html
for more details.
[    0.094718]  #5 #6 #7
[    0.095926] smp: Brought up 1 node, 8 CPUs
[    0.095926] smpboot: Max logical packages: 1
[    0.095926] smpboot: Total of 8 processors activated (46398.17 BogoMIPS)
[    0.096648] ACPI: PM: Registering ACPI NVS region [mem
0x850d7000-0x850d7fff] (4096 bytes)
[    0.096648] ACPI: PM: Registering ACPI NVS region [mem
0x8cb9a000-0x8cf3dfff] (3817472 bytes)
[    0.096648] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.096648] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.096648] pinctrl core: initialized pinctrl subsystem
[    0.096772] PM: RTC time: 09:24:51, date: 2021-10-22
[    0.096823] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.096899] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.096903] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for
atomic allocations
[    0.096907] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool
for atomic allocations
[    0.096912] audit: initializing netlink subsys (disabled)
[    0.096917] audit: type=2000 audit(1634894691.010:1):
state=initialized audit_enabled=0 res=1
[    0.096917] ramoops: using module parameters
[    0.096917] ramoops: error in header, 4
[    0.098149] printk: console [ramoops-1] enabled
[    0.098163] pstore: Registered ramoops as persistent store backend
[    0.098164] ramoops: using 0x100000@0x500000, ecc: 16
[    0.098220] thermal_sys: Registered thermal governor 'bang_bang'
[    0.098221] thermal_sys: Registered thermal governor 'step_wise'
[    0.098222] thermal_sys: Registered thermal governor 'user_space'
[    0.098230] cpuidle: using governor ladder
[    0.098233] cpuidle: using governor menu
[    0.098260] ACPI: bus type PCI registered
[    0.098260] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.098260] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[    0.098260] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.098260] PCI: Using configuration type 1 for base access
[    0.098552] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.100446] ACPI: Added _OSI(Module Device)
[    0.100448] ACPI: Added _OSI(Processor Device)
[    0.100448] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.100449] ACPI: Added _OSI(Processor Aggregator Device)
[    0.100450] ACPI: Added _OSI(Linux-Dell-Video)
[    0.100451] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.100452] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.133862] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.138656] ACPI: Dynamic OEM Table Load:
[    0.138667] ACPI: SSDT 0xFFFF94B400B10800 000672 (v02 PmRef
Cpu0Ist  00003000 INTL 20160422)
[    0.139524] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.140631] ACPI: Dynamic OEM Table Load:
[    0.140635] ACPI: SSDT 0xFFFF94B400E2CC00 0003FF (v02 PmRef
Cpu0Cst  00003001 INTL 20160422)
[    0.141469] ACPI: Dynamic OEM Table Load:
[    0.141473] ACPI: SSDT 0xFFFF94B400239C00 000115 (v02 PmRef
Cpu0Hwp  00003000 INTL 20160422)
[    0.142190] ACPI: Dynamic OEM Table Load:
[    0.142193] ACPI: SSDT 0xFFFF94B40023AA00 0001A4 (v02 PmRef  HwpLvt
  00003000 INTL 20160422)
[    0.143166] ACPI: Dynamic OEM Table Load:
[    0.143171] ACPI: SSDT 0xFFFF94B400B16800 00065C (v02 PmRef  ApIst
  00003000 INTL 20160422)
[    0.144183] ACPI: Dynamic OEM Table Load:
[    0.144186] ACPI: SSDT 0xFFFF94B400238C00 000197 (v02 PmRef  ApHwp
  00003000 INTL 20160422)
[    0.144994] ACPI: Dynamic OEM Table Load:
[    0.144998] ACPI: SSDT 0xFFFF94B400234200 00018A (v02 PmRef  ApCst
  00003000 INTL 20160422)
[    0.148652] ACPI: Interpreter enabled
[    0.148689] ACPI: PM: (supports S0 S3 S4 S5)
[    0.148690] ACPI: Using IOAPIC for interrupt routing
[    0.148724] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[    0.149507] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.152805] ACPI: PM: Power Resource [WRST]
[    0.153021] ACPI: PM: Power Resource [WRST]
[    0.153239] ACPI: PM: Power Resource [WRST]
[    0.153457] ACPI: PM: Power Resource [WRST]
[    0.153670] ACPI: PM: Power Resource [WRST]
[    0.153886] ACPI: PM: Power Resource [WRST]
[    0.154105] ACPI: PM: Power Resource [WRST]
[    0.154320] ACPI: PM: Power Resource [WRST]
[    0.154548] ACPI: PM: Power Resource [WRST]
[    0.154763] ACPI: PM: Power Resource [WRST]
[    0.154976] ACPI: PM: Power Resource [WRST]
[    0.155192] ACPI: PM: Power Resource [WRST]
[    0.155406] ACPI: PM: Power Resource [WRST]
[    0.155623] ACPI: PM: Power Resource [WRST]
[    0.155837] ACPI: PM: Power Resource [WRST]
[    0.156050] ACPI: PM: Power Resource [WRST]
[    0.156263] ACPI: PM: Power Resource [WRST]
[    0.157253] ACPI: PM: Power Resource [WRST]
[    0.157470] ACPI: PM: Power Resource [WRST]
[    0.157687] ACPI: PM: Power Resource [WRST]
[    0.165638] ACPI: PM: Power Resource [FN00]
[    0.165697] ACPI: PM: Power Resource [FN01]
[    0.165751] ACPI: PM: Power Resource [FN02]
[    0.165802] ACPI: PM: Power Resource [FN03]
[    0.165851] ACPI: PM: Power Resource [FN04]
[    0.166676] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.166682] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI HPX-Type3]
[    0.167662] acpi PNP0A08:00: _OSC: OS now controls [PME AER
PCIeCapability LTR]
[    0.168192] PCI host bridge to bus 0000:00
[    0.168193] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.168195] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.168197] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[    0.168198] pci_bus 0000:00: root bus resource [mem
0x90000000-0xdfffffff window]
[    0.168199] pci_bus 0000:00: root bus resource [mem
0xfd000000-0xfe7fffff window]
[    0.168200] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.168305] pci 0000:00:00.0: [8086:5910] type 00 class 0x060000
[    0.168532] pci 0000:00:02.0: [8086:591b] type 00 class 0x030000
[    0.168542] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
[    0.168548] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff
64bit pref]
[    0.168552] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.168568] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.168727] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.168735] pci 0000:00:08.0: reg 0x10: [mem 0xdf330000-0xdf330fff 64bit]
[    0.168943] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.168970] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
[    0.169066] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.169574] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.169597] pci 0000:00:14.2: reg 0x10: [mem 0xdf32f000-0xdf32ffff 64bit]
[    0.169845] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.169866] pci 0000:00:16.0: reg 0x10: [mem 0xdf32e000-0xdf32efff 64bit]
[    0.169932] pci 0000:00:16.0: PME# supported from D3hot
[    0.170376] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[    0.170406] pci 0000:00:17.0: reg 0x10: [mem 0xdf328000-0xdf329fff]
[    0.170424] pci 0000:00:17.0: reg 0x14: [mem 0xdf32d000-0xdf32d0ff]
[    0.170443] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.170458] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.170474] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.170491] pci 0000:00:17.0: reg 0x24: [mem 0xdf32c000-0xdf32c7ff]
[    0.170584] pci 0000:00:17.0: PME# supported from D3hot
[    0.170876] pci 0000:00:1c.0: [8086:a112] type 01 class 0x060400
[    0.170975] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.171412] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
[    0.171506] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.171948] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[    0.172037] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.172552] pci 0000:00:1e.0: [8086:a127] type 00 class 0x118000
[    0.172621] pci 0000:00:1e.0: reg 0x10: [mem 0xdf32b000-0xdf32bfff 64bit]
[    0.173384] pci 0000:00:1f.0: [8086:a153] type 00 class 0x060100
[    0.173722] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.173738] pci 0000:00:1f.2: reg 0x10: [mem 0xdf324000-0xdf327fff]
[    0.174028] pci 0000:00:1f.3: [8086:a171] type 00 class 0x040300
[    0.174048] pci 0000:00:1f.3: reg 0x10: [mem 0xdf320000-0xdf323fff 64bit]
[    0.174076] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
[    0.174126] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.174812] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.174870] pci 0000:00:1f.4: reg 0x10: [mem 0xdf32a000-0xdf32a0ff 64bit]
[    0.174940] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.175258] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.175279] pci 0000:01:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.175306] pci 0000:01:00.0: reg 0x18: [mem 0xdf204000-0xdf204fff 64bit]
[    0.175324] pci 0000:01:00.0: reg 0x20: [mem 0xdf200000-0xdf203fff 64bit]
[    0.175449] pci 0000:01:00.0: supports D1 D2
[    0.175450] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.175736] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.175740] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.175743] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.175842] pci 0000:02:00.0: [8086:2723] type 00 class 0x028000
[    0.175865] pci 0000:02:00.0: reg 0x10: [mem 0xdf100000-0xdf103fff 64bit]
[    0.175995] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.176260] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.176265] pci 0000:00:1c.3:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.176360] pci 0000:03:00.0: [15b7:5006] type 00 class 0x010802
[    0.176383] pci 0000:03:00.0: reg 0x10: [mem 0xdf000000-0xdf003fff 64bit]
[    0.176420] pci 0000:03:00.0: reg 0x20: [mem 0xdf004000-0xdf0040ff 64bit]
[    0.176819] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.176826] pci 0000:00:1d.0:   bridge window [mem 0xdf000000-0xdf0fffff]
[    0.176857] pci_bus 0000:00: on NUMA node 0
[    0.178395] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.178437] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.178478] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.178519] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.178559] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[    0.178599] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[    0.178640] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.178681] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.182740] iommu: Default domain type: Translated
[    0.182741] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.182754] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.182757] pci 0000:00:02.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[    0.182762] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.182762] vgaarb: loaded
[    0.182811] SCSI subsystem initialized
[    0.182816] libata version 3.00 loaded.
[    0.182819] ACPI: bus type USB registered
[    0.182832] usbcore: registered new interface driver usbfs
[    0.182838] usbcore: registered new interface driver hub
[    0.182843] usbcore: registered new device driver usb
[    0.182862] mc: Linux media interface: v0.10
[    0.182866] videodev: Linux video capture interface: v2.00
[    0.182880] EDAC MC: Ver: 3.0.0
[    0.182880] Registered efivars operations
[    0.182880] PCI: Using ACPI for IRQ routing
[    0.211190] PCI: pci_cache_line_size set to 64 bytes
[    0.211273] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.211275] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.211275] e820: reserve RAM buffer [mem 0x850d7000-0x87ffffff]
[    0.211277] e820: reserve RAM buffer [mem 0x8805d000-0x8bffffff]
[    0.211278] e820: reserve RAM buffer [mem 0x8ac24000-0x8bffffff]
[    0.211279] e820: reserve RAM buffer [mem 0x8bea8000-0x8bffffff]
[    0.211279] e820: reserve RAM buffer [mem 0x8cb9a000-0x8fffffff]
[    0.211280] e820: reserve RAM buffer [mem 0x8d400000-0x8fffffff]
[    0.211281] e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff]
[    0.211356] clocksource: Switched to clocksource tsc-early
[    0.214679] VFS: Disk quotas dquot_6.6.0
[    0.214690] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.214715] pnp: PnP ACPI init
[    0.214913] system 00:00: [io  0x0a00-0x0a2f] has been reserved
[    0.214916] system 00:00: [io  0x0a30-0x0a3f] has been reserved
[    0.214918] system 00:00: [io  0x0a40-0x0a4f] has been reserved
[    0.215102] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.215104] system 00:03: [io  0xffff] has been reserved
[    0.215105] system 00:03: [io  0xffff] has been reserved
[    0.215106] system 00:03: [io  0xffff] has been reserved
[    0.215107] system 00:03: [io  0x1800-0x18fe] has been reserved
[    0.215109] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.215190] system 00:04: [io  0x0800-0x087f] has been reserved
[    0.215229] system 00:06: [io  0x1854-0x1857] has been reserved
[    0.215408] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.215410] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.215414] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.215416] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.215417] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.215418] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.215419] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.215421] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.215422] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.215424] system 00:07: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.215457] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.215459] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.215460] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.215461] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.215463] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.215464] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.215465] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.215732] system 00:09: [io  0xff00-0xfffe] has been reserved
[    0.216718] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.216720] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.216721] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.217445] pnp: PnP ACPI: found 11 devices
[    0.222439] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns
[    0.222467] NET: Registered PF_INET protocol family
[    0.222537] IP idents hash table entries: 131072 (order: 8, 1048576
bytes, linear)
[    0.223402] tcp_listen_portaddr_hash hash table entries: 4096
(order: 4, 65536 bytes, linear)
[    0.223423] TCP established hash table entries: 65536 (order: 7,
524288 bytes, linear)
[    0.223491] TCP bind hash table entries: 65536 (order: 8, 1048576
bytes, linear)
[    0.223625] TCP: Hash tables configured (established 65536 bind 65536)
[    0.223646] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.223661] UDP-Lite hash table entries: 4096 (order: 5, 131072
bytes, linear)
[    0.223697] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.223706] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.223710] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.223716] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.223726] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.223731] pci 0000:00:1c.3:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.223742] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.223746] pci 0000:00:1d.0:   bridge window [mem 0xdf000000-0xdf0fffff]
[    0.223756] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.223758] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.223759] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.223760] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[    0.223761] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.223763] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.223764] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf2fffff]
[    0.223765] pci_bus 0000:02: resource 1 [mem 0xdf100000-0xdf1fffff]
[    0.223766] pci_bus 0000:03: resource 1 [mem 0xdf000000-0xdf0fffff]
[    0.223857] pci 0000:00:02.0: Video device with shadowed ROM at
[mem 0x000c0000-0x000dffff]
[    0.224100] PCI: CLS 64 bytes, default 64
[    0.224109] DMAR: Host address width 39
[    0.224110] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.224117] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap
1c0000c40660462 ecap 19e2ff0505e
[    0.224119] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.224124] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap
d2008c40660462 ecap f050da
[    0.224126] DMAR: RMRR base: 0x0000008c444000 end: 0x0000008c463fff
[    0.224128] DMAR: RMRR base: 0x0000008d800000 end: 0x0000008fffffff
[    0.224129] DMAR: ANDD device: 9 name: \_SB.PCI0.UA00
[    0.224133] DMAR: ACPI device "device:77" under DMAR at fed91000 as 00:1e.0
[    0.224140] Trying to unpack rootfs image as initramfs...
[    0.224143] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.224144] software IO TLB: mapped [mem
0x000000007fe64000-0x0000000083e64000] (64MB)
[    0.224208] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters,
655360 ms ovfl timer
[    0.224209] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    0.224210] RAPL PMU: hw unit of domain package 2^-14 Joules
[    0.224211] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    0.224212] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    0.229930] Initialise system trusted keyrings
[    0.229970] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[    0.230925] zbud: loaded
[    0.231121] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.231165] fuse: init (API version 7.34)
[    0.239249] Key type asymmetric registered
[    0.239252] Asymmetric key parser 'x509' registered
[    0.239260] io scheduler mq-deadline registered
[    0.239261] io scheduler kyber registered
[    0.239278] io scheduler bfq registered
[    0.239550] pcieport 0000:00:1c.0: PME: Signaling with IRQ 120
[    0.239595] pcieport 0000:00:1c.0: AER: enabled with IRQ 120
[    0.239801] pcieport 0000:00:1c.3: PME: Signaling with IRQ 121
[    0.239842] pcieport 0000:00:1c.3: AER: enabled with IRQ 121
[    0.240022] pcieport 0000:00:1d.0: PME: Signaling with IRQ 122
[    0.240069] pcieport 0000:00:1d.0: AER: enabled with IRQ 122
[    0.240638] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.240659] ACPI: button: Sleep Button [SLPB]
[    0.240683] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.240697] ACPI: button: Power Button [PWRB]
[    0.240723] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.240757] ACPI: button: Power Button [PWRF]
[    0.240947] smpboot: Estimated ratio of average max frequency by
base frequency (times 1024): 1235
[    0.241869] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.242250] hpet_acpi_add: no address or irqs in _CRS
[    0.242270] Linux agpgart interface v0.103
[    0.242295] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.242296] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    0.243537] brd: module loaded
[    0.244511] loop: module loaded
[    0.244586] zram: Added device: zram0
[    0.244814] nvme nvme0: pci function 0000:03:00.0
[    0.244843] ahci 0000:00:17.0: version 3.0
[    0.245144] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6
Gbps 0xc impl SATA mode
[    0.245147] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo
only pio slum part ems deso sadm sds apst
[    0.253475] nvme nvme0: 8/0/0 default/read/poll queues
[    0.256135]  nvme0n1: p1 p2
[    0.260926] scsi host0: ahci
[    0.261047] scsi host1: ahci
[    0.261125] scsi host2: ahci
[    0.261208] scsi host3: ahci
[    0.261248] ata1: DUMMY
[    0.261250] ata2: DUMMY
[    0.261254] ata3: SATA max UDMA/133 abar m2048@0xdf32c000 port
0xdf32c200 irq 124
[    0.261259] ata4: SATA max UDMA/133 abar m2048@0xdf32c000 port
0xdf32c280 irq 124
[    0.261428] tun: Universal TUN/TAP device driver, 1.6
[    0.261460] VFIO - User Level meta-driver version: 0.3
[    0.261795] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.261804] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 1
[    0.262924] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci
version 0x100 quirks 0x0000000001109810
[    0.263350] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.263353] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 2
[    0.263355] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    0.263457] hub 1-0:1.0: USB hub found
[    0.263492] hub 1-0:1.0: 16 ports detected
[    0.264526] hub 2-0:1.0: USB hub found
[    0.264546] hub 2-0:1.0: 8 ports detected
[    0.265086] usbcore: registered new interface driver usb-storage
[    0.265109] userial_init: registered 8 ttyGS* devices
[    0.265161] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M]
at 0x60,0x64 irq 1,12
[    0.265899] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.265929] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.265985] mousedev: PS/2 mouse device common for all mice
[    0.266044] rtc_cmos 00:05: RTC can wake from S4
[    0.266464] rtc rtc0: alarm rollover: day
[    0.266642] rtc_cmos 00:05: char device (250:0)
[    0.266645] rtc_cmos 00:05: registered as rtc0
[    0.266780] rtc_cmos 00:05: setting system clock to
2021-10-22T09:24:51 UTC (1634894691)
[    0.266793] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram
[    0.266966] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22)
initialised: dm-devel@redhat.com
[    0.266974] intel_pstate: Intel P-state driver initializing
[    0.267327] intel_pstate: Disabling energy efficiency optimization
[    0.267328] intel_pstate: HWP enabled
[    0.267339] sdhci: Secure Digital Host Controller Interface driver
[    0.267340] sdhci: Copyright(c) Pierre Ossman
[    0.267358] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.267553] efifb: probing for efifb
[    0.267569] efifb: showing boot graphics
[    0.268784] efifb: framebuffer at 0xc0000000, using 16000k, total 16000k
[    0.268785] efifb: mode is 2560x1600x32, linelength=10240, pages=1
[    0.268786] efifb: scrolling: redraw
[    0.268787] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.268806] fbcon: Deferring console take-over
[    0.268807] fb0: EFI VGA frame buffer device
[    0.268825] hid: raw HID events driver (C) Jiri Kosina
[    0.268865] usbcore: registered new interface driver usbhid
[    0.268865] usbhid: USB HID core driver
[    0.268942] ashmem: initialized
[    0.268996] resource sanity check: requesting [mem
0xfdffe800-0xfe0007ff], which spans more than pnp 00:08 [mem
0xfdb00000-0xfdffffff]
[    0.268998] caller pmc_core_probe+0xaa/0x680 mapping multiple BARs
[    0.269009] intel_pmc_core INT33A1:00:  initialized
[    0.269086] GACT probability NOT on
[    0.269088] Mirror/redirect action on
[    0.269089] netem: version 1.3
[    0.269089] u32 classifier
[    0.269090]     input device check on
[    0.269090]     Actions configured
[    0.269546] xt_time: kernel timezone is -0000
[    0.269585] Initializing XFRM netlink socket
[    0.269647] NET: Registered PF_INET6 protocol family
[    0.269833] Segment Routing with IPv6
[    0.269836] In-situ OAM (IOAM) with IPv6
[    0.269850] mip6: Mobile IPv6
[    0.269858] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.270028] NET: Registered PF_PACKET protocol family
[    0.270030] NET: Registered PF_KEY protocol family
[    0.270033] NET: Registered PF_PHONET protocol family
[    0.270326] microcode: sig=0x906e9, pf=0x20, revision=0xde
[    0.270351] microcode: Microcode Update Driver: v2.2.
[    0.270354] IPI shorthand broadcast: enabled
[    0.270361] sched_clock: Marking stable (266043372,
4239037)->(291803746, -21521337)
[    0.270521] registered taskstats version 1
[    0.270523] Loading compiled-in X.509 certificates
[    0.270557] Key type ._fscrypt registered
[    0.270558] Key type .fscrypt registered
[    0.270559] Key type fscrypt-provisioning registered
[    0.270676] pstore: Using crash dump compression: zstd
[    0.270743] PM:   Magic number: 9:7:425
[    0.270926] PM: Image not found (code -22)
[    0.315624] Freeing initrd memory: 7208K
[    0.504494] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    0.572508] ata4: SATA link down (SStatus 4 SControl 300)
[    0.572558] ata3: SATA link down (SStatus 4 SControl 300)
[    0.577096] Freeing unused decrypted memory: 2036K
[    0.577663] Freeing unused kernel image (initmem) memory: 1624K
[    0.577756] Write protecting the kernel read-only data: 22528k
[    0.578668] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    0.579032] Freeing unused kernel image (rodata/data gap) memory: 632K
[    0.579093] rodata_test: all tests were successful
[    0.579106] Run /init as init process
[    0.579108]   with arguments:
[    0.579110]     /init
[    0.579112]   with environment:
[    0.579114]     HOME=/
[    0.579115]     TERM=linux
[    0.579117]     BOOT_IMAGE=/32/kernel
[    0.579119]     SRC=q
[    0.579120]     mnt=422c65cf-53c6-4e63-8619-298ce0f01129
[    0.579122]     RAMDISK=1ramdisk.img
[    0.579123]     system=
[    0.579125]     DATA=
[    0.579126]     buildvariant=userdebug
[    0.579128]     DEBUG=1
[    0.580535] fbcon: Taking over console
[    0.580701] Console: switching to colour frame buffer device 320x100
[    0.635235] hub 1-1:1.0: USB hub found
[    0.635570] hub 1-1:1.0: 4 ports detected
[    0.745618] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[    0.762100] hub 2-1:1.0: USB hub found
[    0.762385] hub 2-1:1.0: 4 ports detected
[    0.819103] random: fast init done
[    0.873441] usb 1-9: new full-speed USB device number 3 using xhci_hcd
[    1.063455] usb 1-1.1: new low-speed USB device number 4 using xhci_hcd
[    1.148788] input: PixArt USB Optical Mouse as
/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:093A:2510.0001/input/input3
[    1.148860] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID
v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-1.1/input0
[    1.269452] tsc: Refined TSC clocksource calibration: 2903.998 MHz
[    1.269457] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x29dc03c1beb, max_idle_ns: 440795205215 ns
[    1.269502] clocksource: Switched to clocksource tsc
[    2.926526] random: crng init done
[    3.959202] EXT4-fs (nvme0n1p1): mounted filesystem with ordered
data mode. Opts: (null). Quota mode: none.
[    4.017383] loop0: detected capacity change from 0 to 1126832
[    4.064934] loop1: detected capacity change from 0 to 2654208
[    4.116550] EXT4-fs (loop1): mounted filesystem with ordered data
mode. Opts: (null). Quota mode: none.
[    4.165793] EXT4-fs (nvme0n1p1): re-mounted. Opts: (null). Quota mode: none.
[    4.172059] magiskinit: cmdline: [BOOT_IMAGE]=[/32/kernel]
[    4.172068] magiskinit: cmdline: [root]=[/dev/ram0]
[    4.172074] magiskinit: cmdline: [SRC]=[q]
[    4.172080] magiskinit: cmdline: [mnt]=[422c65cf-53c6-4e63-8619-298ce0f01129]
[    4.172085] magiskinit: cmdline: [resume]=[/dev/nvme0n1p1]
[    4.172091] magiskinit: cmdline: [resume_offset]=[65728512]
[    4.172096] magiskinit: cmdline: [video]=[2560x1600@60]
[    4.172101] magiskinit: cmdline: [RAMDISK]=[1ramdisk.img]
[    4.172106] magiskinit: cmdline: [system]=[]
[    4.172111] magiskinit: cmdline: [DATA]=[]
[    4.365501] printk: init: 28 output lines suppressed due to ratelimiting
[    4.365778] init: init first stage started!
[    4.375174] SELinux:  policy capability network_peer_controls=1
[    4.375177] SELinux:  policy capability open_perms=1
[    4.375177] SELinux:  policy capability extended_socket_class=1
[    4.375178] SELinux:  policy capability always_check_network=0
[    4.375178] SELinux:  policy capability cgroup_seclabel=0
[    4.375178] SELinux:  policy capability nnp_nosuid_transition=1
[    4.375179] SELinux:  policy capability genfs_seclabel_symlinks=0
[    4.390493] audit: type=1403 audit(1634894695.622:2):
auid=4294967295 ses=4294967295 lsm=selinux res=1
[    4.390643] init: (Initializing SELinux non-enforcing took 0.02s.)
[    4.391159] init: init second stage started!
[    4.391966] init: Running restorecon...
[    4.418628] init: (Loading properties from /default.prop took 0.00s.)
[    4.419160] init: (Parsing /init.environ.rc took 0.00s.)
[    4.419283] init: (Parsing /init.usb.rc took 0.00s.)
[    4.419371] init: (Parsing /init.cm_android_x86.rc took 0.00s.)
[    4.419547] init: (Parsing /init.usb.configfs.rc took 0.00s.)
[    4.419574] init: (Parsing /init.zygote32.rc took 0.00s.)
[    4.419715] init: (Parsing /su/init.supersu.rc took 0.00s.)
[    4.419917] init: (Parsing /init.cm.rc took 0.00s.)
[    4.420128] audit: type=1400 audit(1634894695.651:3): avc:  denied
{ write } for  pid=1 comm="init" name="parameters" dev="sysfs"
ino=2386 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=dir
permissive=1
[    4.420130] audit: type=1400 audit(1634894695.651:4): avc:  denied
{ add_name } for  pid=1 comm="init" name="ctrl_write_limited"
scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=dir
permissive=1
[    4.420132] audit: type=1400 audit(1634894695.651:5): avc:  denied
{ create } for  pid=1 comm="init" name="ctrl_write_limited"
scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file
permissive=1
[    4.420318] audit: type=1400 audit(1634894695.651:6): avc:  denied
{ execute_no_trans } for  pid=607 comm="init" path="/init" dev="tmpfs"
ino=34 scontext=u:r:init:s0 tcontext=u:object_r:init_exec:s0
tclass=file permissive=1
[    4.420550] ueventd: ueventd started!
[    4.421413] audit: type=1400 audit(1634894695.652:7): avc:  denied
{ open } for  pid=606 comm="ueventd"
path="/system/lib/modules/5.15.0-rc6-android-x86_64+/modules.alias"
dev="nvme0n1p1" ino=37225654 scontext=u:r:ueventd:s0
tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
[    4.424323] audit: type=1400 audit(1634894695.655:8): avc:  denied
{ sys_module } for  pid=607 comm="modprobe" capability=16
scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability
permissive=1
[    4.424329] audit: type=1400 audit(1634894695.655:9): avc:  denied
{ module_load } for  pid=607 comm="modprobe"
path="/system/lib/modules/5.15.0-rc6-android-x86_64+/kernel/fs/sdcardfs/sdcardfs.ko"
dev="nvme0n1p1" ino=37225288 scontext=u:r:init:s0
tcontext=u:object_r:system_data_file:s0 tclass=system permissive=1
[    4.425139] Registering sdcardfs 0.1
[    4.428073] audit: type=1400 audit(1634894695.659:10): avc:  denied
 { sys_module } for  pid=606 comm="ueventd" capability=16
scontext=u:r:ueventd:s0 tcontext=u:r:ueventd:s0 tclass=capability
permissive=1
[    4.444299] modprobe: /sbin/modprobe mdio:00000000000111001100100000000000
[    4.446714] libphy: r8169: probed
[    4.446841] r8169 0000:01:00.0 eth0: RTL8168h/8111h,
00:e4:4f:68:0f:a9, XID 541, IRQ 134
[    4.446844] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194
bytes, tx checksumming: ko]
[    4.468021] cfg80211: Loading compiled-in X.509 certificates for
regulatory database
[    4.468347] modprobe: /sbin/modprobe crypto-pkcs1pad(rsa,sha256)
[    4.470363] modprobe: /sbin/modprobe crypto-pkcs1pad(rsa,sha256)-all
[    4.472436] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.476101] Intel(R) Wireless WiFi driver for Linux
[    4.476137] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[    4.476625] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-cc-a0-66.ucode failed with error -2
[    4.476632] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-cc-a0-65.ucode failed with error -2
[    4.476637] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-cc-a0-64.ucode failed with error -2
[    4.476642] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-cc-a0-63.ucode failed with error -2
[    4.476647] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-cc-a0-62.ucode failed with error -2
[    4.476652] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-cc-a0-61.ucode failed with error -2
[    4.476657] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-cc-a0-60.ucode failed with error -2
[    4.477969] iwlwifi 0000:02:00.0: api flags index 2 larger than
supported by driver
[    4.477975] iwlwifi 0000:02:00.0: TLV_FW_FSEQ_VERSION: FSEQ
Version: 89.3.35.22
[    4.478116] iwlwifi 0000:02:00.0: loaded firmware version
59.601f3a66.0 cc-a0-59.ucode op_mode iwlmvm
[    4.478451] modprobe: /sbin/modprobe iwlmvm
[    4.478957] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[    4.491783] dw-apb-uart.0: ttyS0 at MMIO 0xdf32b000 (irq = 20,
base_baud = 115200) is a 16550A
[    4.502776] iwlwifi 0000:02:00.0: Detected Intel(R) Wi-Fi 6 AX200
160MHz, REV=0x340
[    4.510925] thermal thermal_zone0: failed to read out thermal zone (-61)
[    4.511084] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    4.511609] modprobe: /sbin/modprobe i915
[    4.515623] ueventd: blacklisted module intel_pch_thermal: 1
[    4.576934] checking generic (c0000000 fa0000) vs hw (de000000 1000000)
[    4.576936] checking generic (c0000000 fa0000) vs hw (c0000000 10000000)
[    4.576937] fb0: switching to i915 from EFI VGA
[    4.576995] Console: switching to colour dummy device 80x25
[    4.577047] i915 0000:00:02.0: vgaarb: deactivate vga console
[    4.578580] i915 0000:00:02.0: vgaarb: changed VGA decodes:
olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.579149] i915 0000:00:02.0: [drm] Finished loading DMC firmware
i915/kbl_dmc_ver1_04.bin (v1.4)
[    4.623308] iwlwifi 0000:02:00.0: Detected RF HR B3, rfid=0x10a100
[    4.687941] iwlwifi 0000:02:00.0: base HW address: 78:2b:46:4f:e3:d1
[    4.847634] i915 0000:00:02.0: [drm] failed to retrieve link info,
disabling eDP
[    4.847728] i915 0000:00:02.0: [drm] [ENCODER:94:DDI B/PHY B] is
disabled/in DSI mode with an ungated DDI clock, gate it
[    4.875148] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    4.876595] ACPI: video: Video Device [GFX0] (multi-head: yes  rom:
no  post: no)
[    4.876783] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    4.876889] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[    4.905749] fbcon: i915 (fb0) is primary device
[    4.946870] Console: switching to colour frame buffer device 320x100
[    4.981057] i915 0000:00:02.0: [drm] fb0: i915 frame buffer device
[    5.009322] modprobe: /sbin/modprobe hdaudio:v10EC0662r00100300a01

[    5.026241] Bluetooth: Core ver 2.22
[    5.026276] NET: Registered PF_BLUETOOTH protocol family
[    5.026279] Bluetooth: HCI device and connection manager initialized
[    5.026285] Bluetooth: HCI socket layer initialized
[    5.026288] Bluetooth: L2CAP socket layer initialized
[    5.026295] Bluetooth: SCO socket layer initialized
[    5.034288] usbcore: registered new interface driver btusb
[    5.034362] snd_hda_codec_realtek hdaudioC0D0: autoconfig for
ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:hp
[    5.034374] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[    5.034381] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=0
(0x0/0x0/0x0/0x0/0x0)
[    5.034387] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    5.034389] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.034392] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    5.034692] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017
[    5.035746] Bluetooth: hci0: Device revision is 1
[    5.035754] Bluetooth: hci0: Secure boot is enabled
[    5.035757] Bluetooth: hci0: OTP lock is enabled
[    5.035761] Bluetooth: hci0: API lock is enabled
[    5.035762] Bluetooth: hci0: Debug lock is disabled
[    5.035764] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    5.037271] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi
[    5.055685] modprobe: /sbin/modprobe hdaudio:v8086280Br00100000a01

[    5.064910] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input5
[    5.064932] input: HDA Intel PCH HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input6
[    5.064950] input: HDA Intel PCH HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[    5.064967] input: HDA Intel PCH HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[    5.064983] input: HDA Intel PCH HDMI/DP,pcm=10 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[    5.135126] kauditd_printk_skb: 19 callbacks suppressed
[    5.135129] audit: type=1400 audit(1634894696.366:30): avc:  denied
 { relabelfrom } for  pid=606 comm="ueventd" name="timer" dev="tmpfs"
ino=65 scontext=u:r:ueventd:s0 tcontext=u:object_r:audio_device:s0
tclass=chr_file permissive=1
[    5.135132] audit: type=1400 audit(1634894696.366:31): avc:  denied
 { relabelto } for  pid=606 comm="ueventd" name="timer" dev="tmpfs"
ino=65 scontext=u:r:ueventd:s0 tcontext=u:object_r:audio_device:s0
tclass=chr_file permissive=1
[    5.153778] audit: type=1400 audit(1634894696.385:32): avc:  denied
 { relabelfrom } for  pid=606 comm="ueventd" name="event4" dev="tmpfs"
ino=86 scontext=u:r:ueventd:s0 tcontext=u:object_r:input_device:s0
tclass=chr_file permissive=1
[    5.153781] audit: type=1400 audit(1634894696.385:33): avc:  denied
 { relabelto } for  pid=606 comm="ueventd" name="event4" dev="tmpfs"
ino=86 scontext=u:r:ueventd:s0 tcontext=u:object_r:input_device:s0
tclass=chr_file permissive=1
[    5.170330] ueventd: Coldboot took 0.75s.
[    5.176134] cgroup: Unknown subsys name 'schedtune'
[    5.176487] audit: type=1400 audit(1634865896.404:34): avc:  denied
 { setattr } for  pid=1 comm="init" name="hwbinder" dev="binder" ino=5
scontext=u:r:init:s0 tcontext=u:object_r:unlabeled:s0 tclass=chr_file
permissive=1
[    5.177211] audit: type=1400 audit(1634865896.404:35): avc:  denied
 { dac_read_search } for  pid=1 comm="init" capability=2
scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability
permissive=1
[    5.177270] audit: type=1400 audit(1634865896.404:36): avc:  denied
 { create } for  pid=1 comm="init" name="cpu.rt_period_us"
scontext=u:r:init:s0 tcontext=u:object_r:cgroup:s0 tclass=file
permissive=1
[    5.186078] cgroup: Unknown subsys name 'bfqio'
[    5.191647] audit: type=1400 audit(1634865896.419:37): avc:  denied
 { execute_no_trans } for  pid=647 comm="init"
path="/system/bin/logwrapper" dev="loop1" ino=280 scontext=u:r:init:s0
tcontext=u:object_r:system_file:s0 tclass=file permissive=1
[    5.228264] audit: type=1400 audit(1634865896.455:38): avc:  denied
 { dac_read_search } for  pid=646 comm="logd" capability=2
scontext=u:r:logd:s0 tcontext=u:r:logd:s0 tclass=capability
permissive=1
[    5.228330] audit: type=1400 audit(1634865896.455:39): avc:  denied
 { execute_no_trans } for  pid=649 comm="logwrapper"
path="/system/bin/sh" dev="loop1" ino=395 scontext=u:r:init:s0
tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
[    5.228473] logd.auditd: start
[    5.228476] logd.klogd: 5224235590
[    5.263393] type=1400 audit(1634865896.490:40): avc: denied { write
} for pid=659 comm="setprop" name="property_service" dev="tmpfs"
ino=49 scontext=u:r:toolbox:s0 tcontext=u:object_r:property_socket:s0
tclass=sock_file permissive=1
[    5.263497] type=1400 audit(1634865896.490:41): avc: denied {
connectto } for pid=659 comm="setprop"
path="/dev/socket/property_service" scontext=u:r:toolbox:s0
tcontext=u:r:init:s0 tclass=unix_stream_socket permissive=1
[    5.273594] type=1400 audit(1634865896.501:42): avc: denied {
getattr } for pid=663 comm="mount" path="/su/vold" dev="nvme0n1p1"
ino=15729707 scontext=u:r:toolbox:s0 tcontext=u:object_r:vold_exec:s0
tclass=file permissive=1
[    5.273649] type=1400 audit(1634865896.501:43): avc: denied {
mounton } for pid=663 comm="mount" path="/system/bin/vold" dev="loop1"
ino=461 scontext=u:r:toolbox:s0 tcontext=u:object_r:vold_exec:s0
tclass=file permissive=1
[    5.276689] type=1400 audit(1634865896.504:44): avc: denied { write
} for pid=664 comm="ln" name="/" dev="tmpfs" ino=1
scontext=u:r:toolbox:s0 tcontext=u:object_r:device:s0 tclass=dir
permissive=1
[    5.276786] type=1400 audit(1634865896.504:45): avc: denied {
add_name } for pid=664 comm="ln" name="loop0" scontext=u:r:toolbox:s0
tcontext=u:object_r:device:s0 tclass=dir permissive=1
[    5.276819] type=1400 audit(1634865896.504:46): avc: denied {
create } for pid=664 comm="ln" name="loop0" scontext=u:r:toolbox:s0
tcontext=u:object_r:device:s0 tclass=lnk_file permissive=1
[    5.291638] type=1400 audit(1634865896.519:47): avc: denied {
search } for pid=666 comm="swapon" name="/" dev="nvme0n1p1" ino=2
scontext=u:r:toolbox:s0 tcontext=u:object_r:unlabeled:s0 tclass=dir
permissive=1
[    5.292944] Adding 4194300k swap on /data/f2fs/swapfile.
Priority:-2 extents:19 across:6127612k SSFS
[    5.425479] magiskinit: Mount /sbin tmpfs overlay
[    5.675705] export_store: invalid GPIO 339
[    5.677625] modprobe: /sbin/modprobe fs-overlay
[    5.684217] SELinux:  Context  is not valid (left unmapped).
[    5.945778] binder: 773:773 transaction failed 29189/-22, size 0-0 line 2723
[    6.208088] capability: warning: `daemonsu' uses 32-bit
capabilities (legacy support in use)
[    6.506137] usb 1-1-port1: disabled by hub (EMI?), re-enabling...
[    6.506371] usb 1-1.1: USB disconnect, device number 4
[    6.692968] Bluetooth: hci0: Waiting for firmware download to complete
[    6.693696] Bluetooth: hci0: Firmware loaded in 1617597 usecs
[    6.693732] Bluetooth: hci0: Waiting for device to boot
[    6.697485] usb 1-1.1: new low-speed USB device number 5 using xhci_hcd
[    6.708730] Bluetooth: hci0: Device booted in 14657 usecs
[    6.709017] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc
[    6.710712] Bluetooth: hci0: Applying Intel DDC parameters completed
[    6.713735] Bluetooth: hci0: Firmware revision 0.0 build 118 week 15 2021
[    6.783621] input: PixArt USB Optical Mouse as
/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:093A:2510.0002/input/input10
[    6.783710] hid-generic 0003:093A:2510.0002: input,hidraw0: USB HID
v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-1.1/input0
[    6.946375] healthd: BatteryStatusPath not found
[    6.946380] healthd: BatteryHealthPath not found
[    6.946383] healthd: BatteryPresentPath not found
[    6.946387] healthd: BatteryCapacityPath not found
[    6.946390] healthd: BatteryVoltagePath not found
[    6.946394] healthd: BatteryTemperaturePath not found
[    6.946397] healthd: BatteryTechnologyPath not found
[    6.946400] healthd: BatteryCurrentNowPath not found
[    6.946403] healthd: BatteryFullChargePath not found
[    6.946406] healthd: BatteryCycleCountPath not found
[    6.983802] SELinux:  Converting 276 SID table entries...
[    6.985990] SELinux:  policy capability network_peer_controls=1
[    6.985991] SELinux:  policy capability open_perms=1
[    6.985992] SELinux:  policy capability extended_socket_class=1
[    6.985993] SELinux:  policy capability always_check_network=0
[    6.985993] SELinux:  policy capability cgroup_seclabel=0
[    6.985993] SELinux:  policy capability nnp_nosuid_transition=1
[    6.985994] SELinux:  policy capability genfs_seclabel_symlinks=0
[   10.358673] type=1400 audit(1634865901.586:445): avc: denied {
execmod } for pid=781 comm="main"
path="/system/vendor/lib/libavcodec.so" dev="nvme0n1p1" ino=16797503
scontext=u:r:zygote:s0 tcontext=u:object_r:system_file:s0 tclass=file
permissive=1
[   10.558066] type=1400 audit(1634865901.785:446): avc: denied { read
write } for pid=1134 comm="system_server" name="binder" dev="binder"
ino=4 scontext=u:r:system_server:s0 tcontext=u:object_r:unlabeled:s0
tclass=chr_file permissive=1
[   10.558267] type=1400 audit(1634865901.785:447): avc: denied { open
} for pid=1134 comm="system_server" path="/dev/binderfs/binder"
dev="binder" ino=4 scontext=u:r:system_server:s0
tcontext=u:object_r:unlabeled:s0 tclass=chr_file permissive=1
[   10.558299] type=1400 audit(1634865901.785:448): avc: denied {
ioctl } for pid=1134 comm="system_server" path="/dev/binderfs/binder"
dev="binder" ino=4 ioctlcmd=0x6209 scontext=u:r:system_server:s0
tcontext=u:object_r:unlabeled:s0 tclass=chr_file permissive=1
[   10.558334] type=1400 audit(1634865901.785:449): avc: denied { map
} for pid=1134 comm="system_server" path="/dev/binderfs/binder"
dev="binder" ino=4 scontext=u:r:system_server:s0
tcontext=u:object_r:unlabeled:s0 tclass=chr_file permissive=1
[   10.678910] type=1400 audit(1634865901.906:450): avc: denied {
ioctl } for pid=1033 comm="Binder:1033_1" path="/dev/binderfs/binder"
dev="binder" ino=4 ioctlcmd=0x6201
scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:unlabeled:s0 tclass=chr_file permissive=1
[   10.943195] input: Android Power Button as /devices/virtual/input/input11
[   10.943248] type=1400 audit(1634865902.170:451): avc: denied {
write } for pid=1134 comm="system_server" name="uinput" dev="tmpfs"
ino=147 scontext=u:r:system_server:s0
tcontext=u:object_r:uhid_device:s0 tclass=chr_file permissive=1
[   10.943280] type=1400 audit(1634865902.170:452): avc: denied { open
} for pid=1134 comm="system_server" path="/dev/uinput" dev="tmpfs"
ino=147 scontext=u:r:system_server:s0
tcontext=u:object_r:uhid_device:s0 tclass=chr_file permissive=1
[   10.943299] type=1400 audit(1634865902.170:453): avc: denied {
ioctl } for pid=1134 comm="system_server" path="/dev/uinput"
dev="tmpfs" ino=147 ioctlcmd=0x5564 scontext=u:r:system_server:s0
tcontext=u:object_r:uhid_device:s0 tclass=chr_file permissive=1
[   10.976241] type=1400 audit(1634865902.203:454): avc: denied { read
} for pid=1134 comm="system_server"
name="privapp-permissions-screenrecorder.xml" dev="nvme0n1p1"
ino=15730885 scontext=u:r:system_server:s0
tcontext=u:object_r:adb_data_file:s0 tclass=file permissive=1
[   11.663409] audit_log_lost: 4 callbacks suppressed
[   11.663417] audit: audit_lost=332 audit_rate_limit=20 audit_backlog_limit=64
[   11.663418] audit: rate limit exceeded
[   17.556268] type=1400 audit(1634865908.783:471): avc: denied {
dac_read_search } for pid=785 comm="installd" capability=2
scontext=u:r:installd:s0 tcontext=u:r:installd:s0 tclass=capability
permissive=1
[   17.800871] type=1400 audit(1634865909.028:472): avc: denied {
ioctl } for pid=773 comm="healthd" path="/dev/binderfs/binder"
dev="binder" ino=4 ioctlcmd=0x6201 scontext=u:r:healthd:s0
tcontext=u:object_r:unlabeled:s0 tclass=chr_file permissive=1
[   17.889565] type=1400 audit(1634865909.117:473): avc: denied {
wake_alarm } for pid=1134 comm="system_server" capability=35
scontext=u:r:system_server:s0 tcontext=u:r:system_server:s0
tclass=capability2 permissive=1
[   17.889594] type=1400 audit(1634865909.117:474): avc: denied {
wake_alarm } for pid=1134 comm="system_server" capability=35
scontext=u:r:system_server:s0 tcontext=u:r:system_server:s0
tclass=capability2 permissive=1
[   18.952541] init: write_file: Unable to open
'/proc/sys/vm/extra_free_kbytes': No such file or directory
[   18.975012] type=1400 audit(1634865910.202:475): avc: denied {
ioctl } for pid=992 comm="BootAnimation" path="/dev/dri/renderD128"
dev="tmpfs" ino=82 ioctlcmd=0x642e scontext=u:r:bootanim:s0
tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[   20.082244] type=1400 audit(1634865911.309:476): avc: denied {
ioctl } for pid=791 comm="Binder:791_3" path="/dev/binderfs/binder"
dev="binder" ino=4 ioctlcmd=0x6201 scontext=u:r:netd:s0
tcontext=u:object_r:unlabeled:s0 tclass=chr_file permissive=1
[   20.445287] init: write_file: Unable to open
'/sys/class/android_usb/android0/enable': No such file or directory
[   20.445296] init: write_file: Unable to open
'/sys/class/android_usb/android0/bDeviceClass': No such file or
directory
[   20.528260] type=1400 audit(1634865911.755:477): avc: denied { read
write } for pid=1134 comm="Thread-3" name="renderD128" dev="tmpfs"
ino=82 scontext=u:r:system_server:s0 tcontext=u:object_r:device:s0
tclass=chr_file permissive=1
[   20.528286] type=1400 audit(1634865911.755:478): avc: denied { open
} for pid=1134 comm="Thread-3" path="/dev/dri/renderD128" dev="tmpfs"
ino=82 scontext=u:r:system_server:s0 tcontext=u:object_r:device:s0
tclass=chr_file permissive=1
[   20.528315] type=1400 audit(1634865911.755:479): avc: denied {
ioctl } for pid=1134 comm="Thread-3" path="/dev/dri/renderD128"
dev="tmpfs" ino=82 ioctlcmd=0x6400 scontext=u:r:system_server:s0
tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[   20.530082] type=1400 audit(1634865911.757:480): avc: denied {
getattr } for pid=1134 comm="Thread-3" path="/dev/dri/card0"
dev="tmpfs" ino=83 scontext=u:r:system_server:s0
tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[   20.662509] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY
driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
[   20.826604] r8169 0000:01:00.0 eth0: Link is Down
[   21.126836] sdcardfs version 2.0
[   21.126838] sdcardfs: dev_name -> /data/media
[   21.126839] sdcardfs: gid=1015,mask=6
[   21.126850] sdcardfs: mounted on top of /data/media type ext4
[   21.126886] sdcardfs version 2.0
[   21.126887] sdcardfs: dev_name -> /data/media
[   21.126887] sdcardfs: gid=9997,mask=17
[   21.126890] sdcardfs: mounted on top of /data/media type ext4
[   21.126908] sdcardfs version 2.0
[   21.126908] sdcardfs: dev_name -> /data/media
[   21.126909] sdcardfs: gid=9997,mask=7
[   21.126911] sdcardfs: mounted on top of /data/media type ext4
[   21.159210] audit: audit_lost=333 audit_rate_limit=20 audit_backlog_limit=64
[   21.159213] audit: rate limit exceeded
[   21.244023] init: Starting service 'wpa_supplicant'...
[   23.437968] type=1400 audit(1634865914.665:571): avc: denied {
ioctl } for pid=782 comm="AudioOut_D" path="/dev/binderfs/binder"
dev="binder" ino=4 ioctlcmd=0x6201 scontext=u:r:audioserver:s0
tcontext=u:object_r:unlabeled:s0 tclass=chr_file permissive=1
[   23.783962] type=1400 audit(1634865915.011:572): avc: denied {
search } for pid=1511 comm="RenderThread" name="com.n0n3m4.gltools"
dev="nvme0n1p1" ino=25428439 scontext=u:r:system_app:s0
tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=1
[   24.025537] r8169 0000:01:00.0 eth0: Link is Up - 1Gbps/Full - flow
control off
[   24.025557] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   25.091579] type=1400 audit(1634865916.319:573): avc: denied {
ioctl } for pid=791 comm="Binder:791_7" path="/dev/binderfs/binder"
dev="binder" ino=4 ioctlcmd=0x6201 scontext=u:r:netd:s0
tcontext=u:object_r:unlabeled:s0 tclass=chr_file permissive=1
[   25.098595] type=1400 audit(1634865916.326:574): avc: denied {
ioctl } for pid=777 comm="Binder:777_2" path="/dev/binderfs/binder"
dev="binder" ino=4 ioctlcmd=0x6201 scontext=u:r:surfaceflinger:s0
tcontext=u:object_r:unlabeled:s0 tclass=chr_file permissive=1
[   25.103816] type=1400 audit(1634865916.331:575): avc: denied {
ioctl } for pid=776 comm="servicemanager" path="/dev/binderfs/binder"
dev="binder" ino=4 ioctlcmd=0x6201 scontext=u:r:servicemanager:s0
tcontext=u:object_r:unlabeled:s0 tclass=chr_file permissive=1
[   25.108344] init: write_file: Unable to open
'/proc/sys/net/ipv4/tcp_default_init_rwnd': No such file or directory
[   25.108535] init: Starting service 'exec 5 (/system/bin/logwrapper)'...
[   25.108919] type=1400 audit(1634865916.336:576): avc: denied {
execute_no_trans } for pid=1635 comm="init"
path="/system/bin/logwrapper" dev="loop1" ino=280 scontext=u:r:init:s0
tcontext=u:object_r:system_file:s0 tclass=file permissive=1
[   25.112042] type=1400 audit(1634865916.339:577): avc: denied {
execute_no_trans } for pid=1636 comm="logwrapper"
path="/system/bin/sh" dev="loop1" ino=395 scontext=u:r:init:s0
tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
[   25.118839] type=1400 audit(1634865916.346:578): avc: denied {
write } for pid=1641 comm="getprop" path="pipe:[17885]" dev="pipefs"
ino=17885 scontext=u:r:toolbox:s0 tcontext=u:r:init:s0
tclass=fifo_file permissive=1
[   25.119509] type=1400 audit(1634865916.346:579): avc: denied {
ioctl } for pid=1511 comm="RenderThread" path="/dev/dri/renderD128"
dev="tmpfs" ino=82 ioctlcmd=0x642e scontext=u:r:system_app:s0
tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[   25.122337] type=1400 audit(1634865916.349:580): avc: denied {
getattr } for pid=1641 comm="getprop" path="pipe:[17885]" dev="pipefs"
ino=17885 scontext=u:r:toolbox:s0 tcontext=u:r:init:s0
tclass=fifo_file permissive=1
[   25.126134] netpoll: netconsole: couldn't parse config at ''!
[   25.126136] netconsole: cleaning up
[   25.146622] init: Service 'exec 5 (/system/bin/logwrapper)' (pid
1635) exited with status 0
[   26.843126] init: Service 'bootanim' (pid 992) exited with status 0
[   27.007186] init: Starting service 'kQt11hU9nomI'...
[   27.007359] init: Starting service 'exec 6 (/system/bin/logwrapper)'...
[   27.011136] init: Service 'kQt11hU9nomI' (pid 1662) exited with status 0
[   27.037751] init: Service 'exec 6 (/system/bin/logwrapper)' (pid
1663) exited with status 0
[   27.038021] init: Starting service 'exec 7 (/system/bin/bootstat)'...
[   27.043735] init: Service 'exec 7 (/system/bin/bootstat)' (pid
1676) exited with status 0
[   27.163747] audit: audit_lost=393 audit_rate_limit=20 audit_backlog_limit=64
[   27.163750] audit: rate limit exceeded
[   27.774093] netpoll: netconsole: couldn't parse config at ''!
[   27.774096] netconsole: cleaning up
[   28.467385] type=1400 audit(1634894719.619:673): avc: denied { read
write } for pid=1782 comm="s.nexuslauncher" name="renderD128"
dev="tmpfs" ino=82 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[   28.467514] type=1400 audit(1634894719.619:674): avc: denied { open
} for pid=1782 comm="s.nexuslauncher" path="/dev/dri/renderD128"
dev="tmpfs" ino=82 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[   28.467589] type=1400 audit(1634894719.619:675): avc: denied {
ioctl } for pid=1782 comm="s.nexuslauncher" path="/dev/dri/renderD128"
dev="tmpfs" ino=82 ioctlcmd=0x6400
scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0
tclass=chr_file permissive=1
[   28.484128] type=1400 audit(1634894719.636:676): avc: denied { read
} for pid=1782 comm="RenderThread" name="dri" dev="tmpfs" ino=81
scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0
tclass=dir permissive=1
[   28.484294] type=1400 audit(1634894719.636:677): avc: denied { open
} for pid=1782 comm="RenderThread" path="/dev/dri" dev="tmpfs" ino=81
scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0
tclass=dir permissive=1
[   28.484351] type=1400 audit(1634894719.636:678): avc: denied {
getattr } for pid=1782 comm="RenderThread" path="/dev/dri/card0"
dev="tmpfs" ino=83 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[   28.484406] type=1400 audit(1634894719.636:679): avc: denied {
getattr } for pid=1782 comm="RenderThread" path="/sys/dev/char/226:0"
dev="sysfs" ino=26814 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:sysfs:s0 tclass=lnk_file permissive=1
[   28.484871] type=1400 audit(1634894719.636:680): avc: denied { read
} for pid=1782 comm="RenderThread" name="uevent" dev="sysfs" ino=6087
scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0
tclass=file permissive=1
[   28.484936] type=1400 audit(1634894719.636:681): avc: denied { open
} for pid=1782 comm="RenderThread"
path="/sys/devices/pci0000:00/0000:00:02.0/uevent" dev="sysfs"
ino=6087 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   28.484983] type=1400 audit(1634894719.637:682): avc: denied {
getattr } for pid=1782 comm="RenderThread"
path="/sys/devices/pci0000:00/0000:00:02.0/uevent" dev="sysfs"
ino=6087 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   28.949901] audit: audit_lost=452 audit_rate_limit=20 audit_backlog_limit=64
[   28.949904] audit: rate limit exceeded
[   29.961074] audit: audit_lost=464 audit_rate_limit=20 audit_backlog_limit=64
[   29.961077] audit: rate limit exceeded
[   30.314173] usb 1-1-port1: disabled by hub (EMI?), re-enabling...
[   30.314407] usb 1-1.1: USB disconnect, device number 5
[   30.507423] usb 1-1.1: new low-speed USB device number 6 using xhci_hcd
[   30.592202] input: PixArt USB Optical Mouse as
/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:093A:2510.0003/input/input12
[   30.592298] hid-generic 0003:093A:2510.0003: input,hidraw0: USB HID
v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-1.1/input0
[   30.672330] wlan0: authenticate with b4:a8:98:22:f9:ac
[   30.676012] wlan0: send auth to b4:a8:98:22:f9:ac (try 1/3)
[   30.713090] wlan0: authenticated
[   30.713425] wlan0: associate with b4:a8:98:22:f9:ac (try 1/3)
[   30.722415] wlan0: RX AssocResp from b4:a8:98:22:f9:ac
(capab=0x1531 status=0 aid=4)
[   30.726271] wlan0: associated
[   30.736618] modprobe: /sbin/modprobe crypto-ccm(aes)
[   30.739078] modprobe: /sbin/modprobe crypto-ccm(aes)-all
[   30.743562] modprobe: /sbin/modprobe crypto-ccm
[   30.747298] modprobe: /sbin/modprobe crypto-cbcmac(aes)
[   30.750745] modprobe: /sbin/modprobe crypto-cbcmac(aes)-all
[   30.754081] modprobe: /sbin/modprobe crypto-ctr(aes)
[   30.757385] modprobe: /sbin/modprobe crypto-ctr(aes)-all
[   30.972454] init: Service 'logcat' is being killed...
[   30.974496] init: Service 'logcat' (pid 779) killed by signal 9
[   30.974504] init: Service 'logcat' (pid 779) killing any children
in process group
[   30.977568] init: Service 'logd' is being killed...
[   30.983890] printk: logd.auditd: 192 output lines suppressed due to
ratelimiting
[   30.984005] init: Service 'logd' (pid 646) killed by signal 9
[   30.984011] init: Service 'logd' (pid 646) killing any children in
process group
[   30.984801] init: Untracked pid 1038 exited with status 1
[   30.999376] audit: audit_lost=504 audit_rate_limit=20 audit_backlog_limit=64
[   30.999380] audit: rate limit exceeded
[   30.999565] binder: 789:1458 transaction failed 29189/-22, size
60-0 line 2723
[   31.000054] binder: 1134:1251 transaction failed 29189/-22, size
348-0 line 2723
[   31.004064] binder: 1134:1134 transaction failed 29189/-22, size
96-0 line 2723
[   31.081809] audit: type=1400 audit(1634894722.234:795): avc:
denied  { search } for  pid=2664 comm="android.vending" name="/"
dev="binder" ino=1 scontext=u:r:priv_app:s0:c512,c768
tcontext=u:object_r:unlabeled:s0 tclass=dir permissive=1
[   31.095825] audit: type=1400 audit(1634894722.248:796): avc:
denied  { search } for  pid=2680 comm="onelli.juicessh" name="/"
dev="binder" ino=1 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:unlabeled:s0 tclass=dir permissive=1
[   31.193446] init: write_file: Unable to open
'/sys/class/android_usb/android0/enable': No such file or directory
[   31.193456] init: write_file: Unable to open
'/sys/class/android_usb/android0/bDeviceClass': No such file or
directory
[   31.208820] it87: Found IT8728F chip at 0xa40, revision 0
[   31.208887] it87: Beeping is supported
[   31.264573] modprobe: /sbin/modprobe char-major-10-125
[   31.267613] qtaguid: ctrl_cmd_tag(): User space forgot to open
/dev/xt_qtaguid? pid=1994 tgid=1865 uid=10020
[   31.467596] binder: 1134:1134 transaction failed 29189/-22, size
84-0 line 2723
[   31.674287] binder: 1134:1148 transaction failed 29189/-22, size
0-0 line 2723
[   32.205976] kauditd_printk_skb: 23 callbacks suppressed
[   32.205980] audit: type=1400 audit(1634894723.358:858): avc:
denied  { getattr } for  pid=781 comm="main"
path="/system/framework/XposedBridge.jar" dev="nvme0n1p1" ino=15730513
scontext=u:r:zygote:s0 tcontext=u:object_r:adb_data_file:s0
tclass=file permissive=1
[   32.210019] audit: type=1400 audit(1634894723.362:859): avc:
denied  { read } for  pid=3103 comm="main" name="XposedBridge.jar"
dev="nvme0n1p1" ino=15730513 scontext=u:r:zygote:s0
tcontext=u:object_r:adb_data_file:s0 tclass=file permissive=1
[   32.210042] audit: type=1400 audit(1634894723.362:860): avc:
denied  { open } for  pid=3103 comm="main"
path="/system/framework/XposedBridge.jar" dev="nvme0n1p1" ino=15730513
scontext=u:r:zygote:s0 tcontext=u:object_r:adb_data_file:s0
tclass=file permissive=1
[   34.075975] audit: type=1400 audit(1634894725.228:861): avc:
denied  { module_request } for  pid=2497 comm=4173796E635461736B202332
kmod="char-major-10-125" scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:r:kernel:s0 tclass=system permissive=1
[   34.077178] modprobe: /sbin/modprobe char-major-10-125
[   34.984652] audit: type=1400 audit(1634894726.137:862): avc:
denied  { ioctl } for  pid=782 comm="audioserver"
path="/dev/binderfs/binder" dev="binder" ino=4 ioctlcmd=0x6201
scontext=u:r:audioserver:s0 tcontext=u:object_r:unlabeled:s0
tclass=chr_file permissive=1
[   34.986870] audit: type=1400 audit(1634894726.139:863): avc:
denied  { search } for  pid=782 comm="audioserver" name="/"
dev="tmpfs" ino=1 scontext=u:r:audioserver:s0
tcontext=u:object_r:tmpfs:s0 tclass=dir permissive=1
[   35.467495] audit: type=1400 audit(1634894726.619:864): avc:
denied  { read } for  pid=3177 comm="RenderThread" name="dri"
dev="tmpfs" ino=81 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:device:s0 tclass=dir permissive=1
[   35.467504] audit: type=1400 audit(1634894726.620:865): avc:
denied  { open } for  pid=3177 comm="RenderThread" path="/dev/dri"
dev="tmpfs" ino=81 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:device:s0 tclass=dir permissive=1
[   37.218283] audit: type=1400 audit(1634894728.370:866): avc:
denied  { map } for  pid=3237 comm="su" path="/su/bin/su"
dev="nvme0n1p1" ino=15729502 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
[   37.232439] audit: type=1400 audit(1634894728.385:867): avc:
denied  { ioctl } for  pid=3177 comm="RenderThread"
path="/dev/dri/renderD128" dev="tmpfs" ino=82 ioctlcmd=0x642e
scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0
tclass=chr_file permissive=1
[   37.329191] EXT4-fs (nvme0n1p1): re-mounted. Opts: . Quota mode: none.
[   37.330224] audit: type=1400 audit(1634894728.482:868): avc:
denied  { ioctl } for  pid=777 comm="surfaceflinger"
path="/dev/dri/card0" dev="tmpfs" ino=83 ioctlcmd=0x64af
scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:device:s0
tclass=chr_file permissive=1
[   37.330226] audit: type=1400 audit(1634894728.482:869): avc:
denied  { ioctl } for  pid=777 comm="vsync" path="/dev/dri/card0"
dev="tmpfs" ino=83 ioctlcmd=0x643a scontext=u:r:surfaceflinger:s0
tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[   37.383015] audit: type=1400 audit(1634894728.535:870): avc:
denied  { ioctl } for  pid=2630 comm="Binder:2630_4"
path="/dev/binderfs/binder" dev="binder" ino=4 ioctlcmd=0x6201
scontext=u:r:platform_app:s0:c512,c768
tcontext=u:object_r:unlabeled:s0 tclass=chr_file permissive=1
[   37.706457] audit: type=1400 audit(1634894728.858:871): avc:
denied  { ioctl } for  pid=1903 comm="Binder:1903_3"
path="/dev/binderfs/binder" dev="binder" ino=4 ioctlcmd=0x6201
scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:unlabeled:s0
tclass=chr_file permissive=1
[   38.173335] audit: type=1400 audit(1634894729.325:872): avc:
denied  { ioctl } for  pid=1134 comm="SoundPool"
path="/dev/binderfs/binder" dev="binder" ino=4 ioctlcmd=0x6201
scontext=u:r:system_server:s0 tcontext=u:object_r:unlabeled:s0
tclass=chr_file permissive=1
[   38.182319] audit: type=1400 audit(1634894729.335:873): avc:
denied  { ioctl } for  pid=1782 comm="s.nexuslauncher"
path="/dev/binderfs/binder" dev="binder" ino=4 ioctlcmd=0x6201
scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:unlabeled:s0 tclass=chr_file permissive=1
[   39.572265] qtaguid: qtaguid_untag(): User space forgot to open
/dev/xt_qtaguid? pid=1879 tgid=1865 sk_pid=1865, uid=10020
[   40.235603] audit: type=1400 audit(1634894731.388:874): avc:
denied  { wake_alarm } for  pid=1134 comm="AlarmManager" capability=35
 scontext=u:r:system_server:s0 tcontext=u:r:system_server:s0
tclass=capability2 permissive=1
[   40.299365] audit: type=1400 audit(1634894731.451:875): avc:
denied  { read write } for  pid=2680 comm="onelli.juicessh"
name="renderD128" dev="tmpfs" ino=82
scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0
tclass=chr_file permissive=1
[   42.364236] kauditd_printk_skb: 4 callbacks suppressed
[   42.364238] audit: type=1400 audit(1634894733.516:880): avc:
denied  { ioctl } for  pid=791 comm="netd" path="/dev/binderfs/binder"
dev="binder" ino=4 ioctlcmd=0x6201 scontext=u:r:netd:s0
tcontext=u:object_r:unlabeled:s0 tclass=chr_file permissive=1
[   50.328118] audit: type=1400 audit(1634894741.481:881): avc:
denied  { module_request } for  pid=2459 comm="measurement-1"
kmod="char-major-10-125" scontext=u:r:priv_app:s0:c512,c768
tcontext=u:r:kernel:s0 tclass=system permissive=1
[   50.329315] modprobe: /sbin/modprobe char-major-10-125
[   50.329354] audit: type=1400 audit(1634894741.481:882): avc:
denied  { write } for  pid=3674 comm="modprobe" name="kmsg"
dev="tmpfs" ino=133 scontext=u:r:init:s0
tcontext=u:object_r:kmsg_device:s0 tclass=chr_file permissive=1
[   50.429642] audit: type=1400 audit(1634894741.582:883): avc:
denied  { ioctl } for  pid=1493 comm="Binder:1493_1"
path="/dev/binderfs/binder" dev="binder" ino=4 ioctlcmd=0x6201
scontext=u:r:radio:s0 tcontext=u:object_r:unlabeled:s0 tclass=chr_file
permissive=1
[   50.680176] audit: type=1400 audit(1634894741.833:884): avc:
denied  { read } for  pid=2811 comm=".yanyan.cputemp" name="temp"
dev="sysfs" ino=28900 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   50.680184] audit: type=1400 audit(1634894741.833:885): avc:
denied  { open } for  pid=2811 comm=".yanyan.cputemp"
path="/sys/devices/virtual/thermal/thermal_zone1/temp" dev="sysfs"
ino=28900 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   50.680203] audit: type=1400 audit(1634894741.833:886): avc:
denied  { getattr } for  pid=2811 comm=".yanyan.cputemp"
path="/sys/devices/virtual/thermal/thermal_zone1/temp" dev="sysfs"
ino=28900 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   55.727832] audit: type=1400 audit(1634894746.880:887): avc:
denied  { map } for  pid=1134 comm="InputDispatcher"
path=2F69393135202864656C6574656429 dev="tmpfs" ino=3156
scontext=u:r:system_server:s0
tcontext=u:object_r:surfaceflinger_tmpfs:s0 tclass=file permissive=1
[   55.727847] audit: type=1400 audit(1634894746.880:888): avc:
denied  { read write } for  pid=1134 comm="InputDispatcher"
path=2F69393135202864656C6574656429 dev="tmpfs" ino=3156
scontext=u:r:system_server:s0
tcontext=u:object_r:surfaceflinger_tmpfs:s0 tclass=file permissive=1
[   57.649268] audit: type=1400 audit(1634894748.801:889): avc:
denied  { confidentiality } for  pid=3713 comm="main"
lockdown_reason="use of tracefs" scontext=u:r:zygote:s0
tcontext=u:r:zygote:s0 tclass=lockdown permissive=1
[   57.652210] audit: type=1400 audit(1634894748.804:890): avc:
denied  { mounton } for  pid=3713 comm="main" path="/storage"
dev="tmpfs" ino=42 scontext=u:r:zygote:s0 tcontext=u:object_r:tmpfs:s0
tclass=dir permissive=1
[   57.652430] audit: type=1400 audit(1634894748.804:891): avc:
denied  { dac_read_search } for  pid=3713 comm="main" capability=2
scontext=u:r:zygote:s0 tcontext=u:r:zygote:s0 tclass=capability
permissive=1
[   57.659323] audit: type=1400 audit(1634894748.811:892): avc:
denied  { search } for  pid=3713 comm="catgames.Xplore" name="/"
dev="binder" ino=1 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:unlabeled:s0 tclass=dir permissive=1
[   57.659333] audit: type=1400 audit(1634894748.811:893): avc:
denied  { read write } for  pid=3713 comm="catgames.Xplore"
name="binder" dev="binder" ino=4
scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:unlabeled:s0 tclass=chr_file permissive=1
[   57.659338] audit: type=1400 audit(1634894748.811:894): avc:
denied  { open } for  pid=3713 comm="catgames.Xplore"
path="/dev/binderfs/binder" dev="binder" ino=4
scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:unlabeled:s0 tclass=chr_file permissive=1
[   57.659359] audit: type=1400 audit(1634894748.811:895): avc:
denied  { map } for  pid=3713 comm="catgames.Xplore"
path="/dev/binderfs/binder" dev="binder" ino=4
scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:unlabeled:s0 tclass=chr_file permissive=1
[   57.899174] audit: type=1400 audit(1634894749.051:896): avc:
denied  { read } for  pid=3713 comm="catgames.Xplore" name="xposed"
dev="nvme0n1p1" ino=17699765 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
[   60.914466] kauditd_printk_skb: 8 callbacks suppressed
[   60.914468] audit: type=1400 audit(1634894752.067:905): avc:
denied  { ioctl } for  pid=790 comm="Binder:790_2"
path="/dev/binderfs/binder" dev="binder" ino=4 ioctlcmd=0x6201
scontext=u:r:mediaserver:s0 tcontext=u:object_r:unlabeled:s0
tclass=chr_file permissive=1
[   73.054548] audit: type=1400 audit(1634894764.207:906): avc:
denied  { search } for  pid=782 comm="AudioOut_D" name="/" dev="tmpfs"
ino=1 scontext=u:r:audioserver:s0 tcontext=u:object_r:tmpfs:s0
tclass=dir permissive=1
[   80.666188] audit: type=1400 audit(1634894771.818:907): avc:
denied  { open } for  pid=1134 comm="BackgroundDexOp"
path="/system/priv-app/Phonesky/base.apk" dev="nvme0n1p1" ino=16790725
scontext=u:r:system_server:s0
tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=file
permissive=1
[   80.666264] audit: type=1400 audit(1634894771.818:908): avc:
denied  { map } for  pid=1134 comm="BackgroundDexOp"
path="/system/priv-app/Phonesky/base.apk" dev="nvme0n1p1" ino=16790725
scontext=u:r:system_server:s0
tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=file
permissive=1
[   80.815994] audit: type=1400 audit(1634894771.968:909): avc:
denied  { getattr } for  pid=1134 comm="BackgroundDexOp"
path="/system/priv-app/ScreenCam" dev="nvme0n1p1" ino=15730887
scontext=u:r:system_server:s0 tcontext=u:object_r:adb_data_file:s0
tclass=dir permissive=1
[   80.815998] audit: type=1400 audit(1634894771.968:910): avc:
denied  { search } for  pid=1134 comm="BackgroundDexOp"
name="ScreenCam" dev="nvme0n1p1" ino=15730887
scontext=u:r:system_server:s0 tcontext=u:object_r:adb_data_file:s0
tclass=dir permissive=1
[   80.816007] audit: type=1400 audit(1634894771.968:911): avc:
denied  { getattr } for  pid=1134 comm="BackgroundDexOp"
path="/system/priv-app/ScreenCam/ScreenCam.apk" dev="nvme0n1p1"
ino=15730888 scontext=u:r:system_server:s0
tcontext=u:object_r:adb_data_file:s0 tclass=file permissive=1
[   80.816528] audit: type=1400 audit(1634894771.969:912): avc:
denied  { read } for  pid=1134 comm="BackgroundDexOp"
name="ScreenCam.apk" dev="nvme0n1p1" ino=15730888
scontext=u:r:system_server:s0 tcontext=u:object_r:adb_data_file:s0
tclass=file permissive=1
[   80.816530] audit: type=1400 audit(1634894771.969:913): avc:
denied  { open } for  pid=1134 comm="BackgroundDexOp"
path="/system/priv-app/ScreenCam/ScreenCam.apk" dev="nvme0n1p1"
ino=15730888 scontext=u:r:system_server:s0
tcontext=u:object_r:adb_data_file:s0 tclass=file permissive=1
[   80.816607] audit: type=1400 audit(1634894771.969:914): avc:
denied  { map } for  pid=1134 comm="BackgroundDexOp"
path="/system/priv-app/ScreenCam/ScreenCam.apk" dev="nvme0n1p1"
ino=15730888 scontext=u:r:system_server:s0
tcontext=u:object_r:adb_data_file:s0 tclass=file permissive=1
[   83.303229] audit: type=1400 audit(1634894774.455:915): avc:
denied  { map } for  pid=3919 comm="su" path="/su/bin/su"
dev="nvme0n1p1" ino=15729502 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
[   83.343604] audit: type=1400 audit(1634894774.496:916): avc:
denied  { write } for  pid=3713 comm=457870616E6420646972
name=".ash_history" dev="nvme0n1p1" ino=15729469
scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
[   89.896591] kauditd_printk_skb: 2 callbacks suppressed
[   89.896598] audit: type=1400 audit(1634894781.049:919): avc:
denied  { ioctl } for  pid=1648 comm="Binder:1648_3"
path="/dev/binderfs/binder" dev="binder" ino=4 ioctlcmd=0x6201
scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:unlabeled:s0
tclass=chr_file permissive=1
[   90.300488] audit: type=1400 audit(1634894781.453:920): avc:
denied  { ioctl } for  pid=777 comm="surfaceflinger"
path="/dev/dri/renderD128" dev="tmpfs" ino=82 ioctlcmd=0x64bf
scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:device:s0
tclass=chr_file permissive=1
[   90.302063] audit: type=1400 audit(1634894781.454:921): avc:
denied  { ioctl } for  pid=2630 comm="ndroid.systemui"
path="/dev/binderfs/binder" dev="binder" ino=4 ioctlcmd=0x6201
scontext=u:r:platform_app:s0:c512,c768
tcontext=u:object_r:unlabeled:s0 tclass=chr_file permissive=1
[   90.304961] audit: type=1400 audit(1634894781.457:922): avc:
denied  { ioctl } for  pid=789 comm="Binder:789_1"
path="/dev/binderfs/binder" dev="binder" ino=4 ioctlcmd=0x6201
scontext=u:r:mediaextractor:s0 tcontext=u:object_r:unlabeled:s0
tclass=chr_file permissive=1
[   90.344214] audit: type=1400 audit(1634894781.496:923): avc:
denied  { ioctl } for  pid=787 comm="Binder:787_1"
path="/dev/binderfs/binder" dev="binder" ino=4 ioctlcmd=0x6201
scontext=u:r:mediacodec:s0 tcontext=u:object_r:unlabeled:s0
tclass=chr_file permissive=1
[   91.172789] audit: type=1400 audit(1634894782.325:924): avc:
denied  { ioctl } for  pid=1493 comm="Binder:1493_1"
path="/dev/binderfs/binder" dev="binder" ino=4 ioctlcmd=0x6201
scontext=u:r:radio:s0 tcontext=u:object_r:unlabeled:s0 tclass=chr_file
permissive=1
[   91.268588] audit: type=1400 audit(1634894782.422:925): avc:
denied  { ioctl } for  pid=773 comm="healthd"
path="/dev/binderfs/binder" dev="binder" ino=4 ioctlcmd=0x6201
scontext=u:r:healthd:s0 tcontext=u:object_r:unlabeled:s0
tclass=chr_file permissive=1
[  120.532595] audit: type=1400 audit(1634894811.685:926): avc:
denied  { wake_alarm } for  pid=1134 comm="AlarmManager" capability=35
 scontext=u:r:system_server:s0 tcontext=u:r:system_server:s0
tclass=capability2 permissive=1
[  132.699142] audit: type=1400 audit(1634894823.851:927): avc:
denied  { module_request } for  pid=2664 comm="Thread-5"
kmod="char-major-10-125" scontext=u:r:priv_app:s0:c512,c768
tcontext=u:r:kernel:s0 tclass=system permissive=1
[  132.699491] audit: type=1400 audit(1634894823.852:928): avc:
denied  { write } for  pid=4044 comm="modprobe" name="kmsg"
dev="tmpfs" ino=133 scontext=u:r:init:s0
tcontext=u:object_r:kmsg_device:s0 tclass=chr_file permissive=1
[  132.699494] modprobe: /sbin/modprobe char-major-10-125
[  140.967761] init: write_file: Unable to open
'/proc/sys/net/ipv4/tcp_default_init_rwnd': No such file or directory
[  140.969241] init: Starting service 'exec 12 (/system/bin/logwrapper)'...
[  140.969981] audit: type=1400 audit(1634894832.122:929): avc:
denied  { execute_no_trans } for  pid=4060 comm="init"
path="/system/bin/logwrapper" dev="loop1" ino=280 scontext=u:r:init:s0
tcontext=u:object_r:system_file:s0 tclass=file permissive=1
[  140.971319] audit: type=1400 audit(1634894832.123:930): avc:
denied  { ioctl } for  pid=1511 comm="Binder:1511_2"
path="/dev/binderfs/binder" dev="binder" ino=4 ioctlcmd=0x6201
scontext=u:r:system_app:s0 tcontext=u:object_r:unlabeled:s0
tclass=chr_file permissive=1
[  140.975962] audit: type=1400 audit(1634894832.128:931): avc:
denied  { execute_no_trans } for  pid=4061 comm="logwrapper"
path="/system/bin/sh" dev="loop1" ino=395 scontext=u:r:init:s0
tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
[  140.976240] audit: type=1400 audit(1634894832.128:932): avc:
denied  { ioctl } for  pid=1134 comm="ConnectivitySer"
path="/dev/binderfs/binder" dev="binder" ino=4 ioctlcmd=0x6201
scontext=u:r:system_server:s0 tcontext=u:object_r:unlabeled:s0
tclass=chr_file permissive=1
[  140.981288] audit: type=1400 audit(1634894832.133:933): avc:
denied  { write } for  pid=4066 comm="getprop" path="pipe:[25454]"
dev="pipefs" ino=25454 scontext=u:r:toolbox:s0 tcontext=u:r:init:s0
tclass=fifo_file permissive=1
[  140.983955] audit: type=1400 audit(1634894832.136:934): avc:
denied  { getattr } for  pid=4066 comm="getprop" path="pipe:[25454]"
dev="pipefs" ino=25454 scontext=u:r:toolbox:s0 tcontext=u:r:init:s0
tclass=fifo_file permissive=1
[  140.984240] audit: type=1400 audit(1634894832.136:935): avc:
denied  { execute_no_trans } for  pid=4067 comm="sh" path="/init"
dev="tmpfs" ino=34 scontext=u:r:init:s0
tcontext=u:object_r:init_exec:s0 tclass=file permissive=1
[  140.986092] audit: type=1400 audit(1634894832.138:936): avc:
denied  { sys_module } for  pid=4067 comm="modprobe" capability=16
scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability
permissive=1
[  140.986094] audit: type=1400 audit(1634894832.138:937): avc:
denied  { module_load } for  pid=4067 comm="modprobe"
path="/system/lib/modules/5.15.0-rc6-android-x86_64+/kernel/drivers/net/netconsole.ko"
dev="nvme0n1p1" ino=16912487 scontext=u:r:init:s0
tcontext=u:object_r:system_data_file:s0 tclass=system permissive=1
[  140.986422] netpoll: netconsole: couldn't parse config at ''!
[  140.986423] netconsole: cleaning up
[  141.011535] init: Service 'exec 12 (/system/bin/logwrapper)' (pid
4060) exited with status 0
[  157.813192] audit: type=1400 audit(1634894848.965:938): avc:
denied  { ioctl } for  pid=791 comm="netd" path="/dev/binderfs/binder"
dev="binder" ino=4 ioctlcmd=0x6201 scontext=u:r:netd:s0
tcontext=u:object_r:unlabeled:s0 tclass=chr_file permissive=1
[  175.872687] audit: type=1400 audit(1634894867.025:939): avc:
denied  { read } for  pid=2811 comm=".yanyan.cputemp" name="temp"
dev="sysfs" ino=28900 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[  175.872699] audit: type=1400 audit(1634894867.025:940): avc:
denied  { open } for  pid=2811 comm=".yanyan.cputemp"
path="/sys/devices/virtual/thermal/thermal_zone1/temp" dev="sysfs"
ino=28900 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[  175.872704] audit: type=1400 audit(1634894867.025:941): avc:
denied  { getattr } for  pid=2811 comm=".yanyan.cputemp"
path="/sys/devices/virtual/thermal/thermal_zone1/temp" dev="sysfs"
ino=28900 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[  187.199410] audit: type=1400 audit(1634894878.351:942): avc:
denied  { getattr } for  pid=781 comm="main"
path="/system/framework/XposedBridge.jar" dev="nvme0n1p1" ino=15730513
scontext=u:r:zygote:s0 tcontext=u:object_r:adb_data_file:s0
tclass=file permissive=1
[  187.205168] audit: type=1400 audit(1634894878.357:943): avc:
denied  { confidentiality } for  pid=4206 comm="main"
lockdown_reason="use of tracefs" scontext=u:r:zygote:s0
tcontext=u:r:zygote:s0 tclass=lockdown permissive=1
[  187.205701] audit: type=1400 audit(1634894878.358:944): avc:
denied  { read } for  pid=4206 comm="main" name="XposedBridge.jar"
dev="nvme0n1p1" ino=15730513 scontext=u:r:zygote:s0
tcontext=u:object_r:adb_data_file:s0 tclass=file permissive=1
[  187.205713] audit: type=1400 audit(1634894878.358:945): avc:
denied  { open } for  pid=4206 comm="main"
path="/system/framework/XposedBridge.jar" dev="nvme0n1p1" ino=15730513
scontext=u:r:zygote:s0 tcontext=u:object_r:adb_data_file:s0
tclass=file permissive=1
[  187.208437] audit: type=1400 audit(1634894878.360:946): avc:
denied  { mounton } for  pid=4206 comm="main" path="/storage"
dev="tmpfs" ino=42 scontext=u:r:zygote:s0 tcontext=u:object_r:tmpfs:s0
tclass=dir permissive=1
[  187.208687] audit: type=1400 audit(1634894878.361:947): avc:
denied  { dac_read_search } for  pid=4206 comm="main" capability=2
scontext=u:r:zygote:s0 tcontext=u:r:zygote:s0 tclass=capability
permissive=1
[  187.216122] audit: type=1400 audit(1634894878.368:948): avc:
denied  { search } for  pid=4206 comm="eatherquicktile" name="/"
dev="binder" ino=1 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:unlabeled:s0 tclass=dir permissive=1
[  187.249411] audit: type=1400 audit(1634894878.401:949): avc:
denied  { read } for  pid=2108 comm="RxCachedThreadS" name="xposed"
dev="nvme0n1p1" ino=17699765 scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
[  187.249433] audit: type=1400 audit(1634894878.401:950): avc:
denied  { getattr } for  pid=2108 comm="RxCachedThreadS"
path="/data/ru.nanPXdAK.hOIfAOSXG/xposed" dev="nvme0n1p1" ino=17699765
scontext=u:r:untrusted_app:s0:c512,c768
tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
[  189.253120] audit: type=1400 audit(1634894880.405:951): avc:
denied  { ioctl } for  pid=782 comm="audioserver"
path="/dev/binderfs/binder" dev="binder" ino=4 ioctlcmd=0x6201
scontext=u:r:audioserver:s0 tcontext=u:object_r:unlabeled:s0
tclass=chr_file permissive=1
[  189.292054] PM: hibernation: hibernation entry
[  189.295273] Filesystems sync: 0.000 seconds
[  189.295281] Freezing user space processes ... (elapsed 0.003 seconds) done.
[  189.298514] OOM killer disabled.
[  189.298590] PM: hibernation: Marking nosave pages: [mem
0x00000000-0x00000fff]
[  189.298594] PM: hibernation: Marking nosave pages: [mem
0x00058000-0x00058fff]
[  189.298596] PM: hibernation: Marking nosave pages: [mem
0x0009f000-0x000fffff]
[  189.298600] PM: hibernation: Marking nosave pages: [mem
0x00500000-0x005fffff]
[  189.298607] PM: hibernation: Marking nosave pages: [mem
0x850d7000-0x850d8fff]
[  189.298609] PM: hibernation: Marking nosave pages: [mem
0x8805d000-0x8809bfff]
[  189.298612] PM: hibernation: Marking nosave pages: [mem
0x8ac24000-0x8ac24fff]
[  189.298614] PM: hibernation: Marking nosave pages: [mem
0x8bea8000-0x8caeefff]
[  189.298689] PM: hibernation: Marking nosave pages: [mem
0x8cb9a000-0x8d3fefff]
[  189.298741] PM: hibernation: Marking nosave pages: [mem
0x8d400000-0xffffffff]
[  189.300918] PM: hibernation: Basic memory bitmaps created
[  189.301088] PM: hibernation: Preallocating image memory
[  189.812115] PM: hibernation: Allocated 779311 pages for snapshot
[  189.812118] PM: hibernation: Allocated 3117244 kbytes in 0.51
seconds (6112.24 MB/s)
[  189.812121] Freezing remaining freezable tasks ... (elapsed 0.001
seconds) done.
[  189.813884] printk: Suspending console(s) (use no_console_suspend to debug)
[  189.814016] wlan0: deauthenticating from b4:a8:98:22:f9:ac by local
choice (Reason: 3=DEAUTH_LEAVING)
[  189.814310] rtc_cmos 00:05: suspend, ctrl 02
[  189.844670] r8169 0000:01:00.0 eth0: Link is Down
[  190.081522] ACPI: PM: Preparing to enter system sleep state S4
[  190.083051] ACPI: PM: Saving platform NVS memory
[  190.087556] Disabling non-boot CPUs ...
[  190.089802] smpboot: CPU 1 is now offline
[  190.092841] smpboot: CPU 2 is now offline
[  190.095235] smpboot: CPU 3 is now offline
[  190.098592] smpboot: CPU 4 is now offline
[  190.100660] smpboot: CPU 5 is now offline
[  190.102967] smpboot: CPU 6 is now offline
[  190.105047] smpboot: CPU 7 is now offline
[  190.106828] PM: hibernation: Creating image:
[  190.211897] PM: hibernation: Need to copy 775681 pages
[  190.211898] PM: hibernation: Normal pages needed: 775681 + 1024,
available pages: 1300224
[  190.107012] ACPI: PM: Restoring platform NVS memory
[  190.108184] Enabling non-boot CPUs ...
[  190.108225] x86: Booting SMP configuration:
[  190.108225] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  190.109416] CPU1 is up
[  190.109440] smpboot: Booting Node 0 Processor 2 APIC 0x4
[  190.110088] CPU2 is up
[  190.110111] smpboot: Booting Node 0 Processor 3 APIC 0x6
[  190.110775] CPU3 is up
[  190.110799] smpboot: Booting Node 0 Processor 4 APIC 0x1
[  190.111532] CPU4 is up
[  190.111558] smpboot: Booting Node 0 Processor 5 APIC 0x3
[  190.112280] CPU5 is up
[  190.112303] smpboot: Booting Node 0 Processor 6 APIC 0x5
[  190.113056] CPU6 is up
[  190.113084] smpboot: Booting Node 0 Processor 7 APIC 0x7
[  190.113886] CPU7 is up
[  190.116276] ACPI: PM: Waking up from system sleep state S4
[  190.187264] usb usb1: root hub lost power or was reset
[  190.187296] usb usb2: root hub lost power or was reset
[  190.188384] rtc_cmos 00:05: resume, ctrl 02
[  190.189946] i915 0000:00:02.0: [drm] [ENCODER:94:DDI B/PHY B] is
disabled/in DSI mode with an ungated DDI clock, gate it
[  190.195185] nvme nvme0: 8/0/0 default/read/poll queues
[  190.354168] r8169 0000:01:00.0 eth0: Link is Down
[  190.526336] ata3: SATA link down (SStatus 4 SControl 300)
[  190.526389] ata4: SATA link down (SStatus 4 SControl 300)
[  191.214037] snd_hda_intel 0000:00:1f.3: azx_get_response timeout,
switching to polling mode: last cmd=0x206f0015
[  191.214047] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
last cmd=0x206f0015
[  191.214054] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
last cmd=0x206f0015
[  191.214058] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
last cmd=0x206f0015
[  191.214061] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
last cmd=0x206f0015
[  191.214064] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
last cmd=0x206f0015
[  191.214067] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
last cmd=0x206f0015
[  191.214070] snd_hda_intel 0000:00:1f.3: spurious response
0x200:0x2, last cmd=0x206f0015
[  191.214073] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
last cmd=0x206f0015
[  191.214076] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
last cmd=0x206f0015
[  191.214079] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2,
last cmd=0x206f0015
[  192.216095] snd_hda_intel 0000:00:1f.3: No response from codec,
disabling MSI: last cmd=0x20670100
[  193.218095] snd_hda_intel 0000:00:1f.3: azx_get_response timeout,
switching to single_cmd mode: last cmd=0x20670100
[  193.547924] r8169 0000:01:00.0 eth0: Link is Up - 1Gbps/Full - flow
control off
[  200.640141] xhci_hcd 0000:00:14.0: Abort failed to stop command ring: -110
[  200.640148] xhci_hcd 0000:00:14.0: xHCI host controller not
responding, assume dead
[  200.640151] xhci_hcd 0000:00:14.0: HC died; cleaning up
[  200.640165] xhci_hcd 0000:00:14.0: Timeout while waiting for setup
device command
[  201.056143] usb 2-1: device not accepting address 2, error -22
[  201.058193] PM: hibernation: Basic memory bitmaps freed
[  201.058197] OOM killer enabled.
[  201.058197] Restarting tasks ...
[  201.058212] usb 2-1: USB disconnect, device number 2
[  201.058234] kauditd_printk_skb: 5 callbacks suppressed
[  201.058238] audit: type=1400 audit(1634894919.000:957): avc:
denied  { perfmon } for  pid=17 comm="cpuhp/1" capability=38
scontext=u:r:kernel:s0 tcontext=u:r:kernel:s0 tclass=capability2
permissive=1
[  201.058249] usb 1-1: USB disconnect, device number 2
[  201.058255] audit: type=1400 audit(1634894919.000:958): avc:
denied  { cpu } for  pid=17 comm="cpuhp/1" scontext=u:r:kernel:s0
tcontext=u:r:kernel:s0 tclass=perf_event permissive=1
[  201.058256] usb 1-1.1: USB disconnect, device number 6
[  201.059059] done.
[  201.059328] video LNXVIDEO:00: Restoring backlight state
[  201.059332] PM: hibernation: hibernation exit
[  201.067203] audit: type=1400 audit(1634894929.957:959): avc:
denied  { ioctl } for  pid=776 comm="servicemanager"
path="/dev/binderfs/binder" dev="binder" ino=4 ioctlcmd=0x6201
scontext=u:r:servicemanager:s0 tcontext=u:object_r:unlabeled:s0
tclass=chr_file permissive=1
[  201.072873] init: write_file: Unable to open
'/proc/sys/net/ipv4/tcp_default_init_rwnd': No such file or directory
[  201.073489] usb 1-9: USB disconnect, device number 3
[  201.078233] audit: type=1400 audit(1634894929.968:960): avc:
denied  { ioctl } for  pid=1134 comm="android.display"
path="/dev/dri/renderD128" dev="tmpfs" ino=82 ioctlcmd=0x6409
scontext=u:r:system_server:s0 tcontext=u:object_r:device:s0
tclass=chr_file permissive=1
[  201.082770] init: Untracked pid 4171 killed by signal 1
[  201.083664] init: Untracked pid 4170 exited with status 255
[  201.085257] init: Untracked pid 4185 exited with status 1
[  201.088167] audit: type=1400 audit(1634894929.978:961): avc:
denied  { module_load } for  pid=4327 comm="modprobe"
path="/system/lib/modules/5.15.0-rc6-android-x86_64+/kernel/drivers/hid/hid-multitouch.ko"
dev="nvme0n1p1" ino=16912286 scontext=u:r:supersu:s0
tcontext=u:object_r:system_data_file:s0 tclass=system permissive=1
[  201.110458] audit: type=1400 audit(1634894930.000:962): avc:
denied  { wake_alarm } for  pid=1134 comm="Binder:1134_8"
capability=35  scontext=u:r:system_server:s0
tcontext=u:r:system_server:s0 tclass=capability2 permissive=1
[  201.114747] init: write_file: Unable to open
'/proc/sys/net/ipv4/tcp_default_init_rwnd': No such file or directory
[  201.115245] init: Starting service 'exec 13 (/system/bin/logwrapper)'...
[  201.116439] audit: type=1400 audit(1634894930.006:963): avc:
denied  { execute_no_trans } for  pid=4342 comm="init"
path="/system/bin/logwrapper" dev="loop1" ino=280 scontext=u:r:init:s0
tcontext=u:object_r:system_file:s0 tclass=file permissive=1
[  201.124053] audit: type=1400 audit(1634894930.013:964): avc:
denied  { execute_no_trans } for  pid=4343 comm="logwrapper"
path="/system/bin/sh" dev="loop1" ino=395 scontext=u:r:init:s0
tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
[  201.129392] audit: type=1400 audit(1634894930.019:966): avc:
denied  { ioctl } for  pid=777 comm="surfaceflinger"
path="/dev/dri/card0" dev="tmpfs" ino=83 ioctlcmd=0x64af
scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:device:s0
tclass=chr_file permissive=1
[  201.129397] audit: type=1400 audit(1634894930.019:965): avc:
denied  { ioctl } for  pid=777 comm="vsync" path="/dev/dri/card0"
dev="tmpfs" ino=83 ioctlcmd=0x643a scontext=u:r:surfaceflinger:s0
tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[  201.146111] netpoll: netconsole: couldn't parse config at ''!
[  201.146115] netconsole: cleaning up
[  201.169062] init: Service 'exec 13 (/system/bin/logwrapper)' (pid
4342) exited with status 0
[  201.169585] init: write_file: Unable to open
'/proc/sys/net/ipv4/tcp_default_init_rwnd': No such file or directory
[  201.169726] init: Starting service 'exec 14 (/system/bin/logwrapper)'...
[  201.191855] netpoll: netconsole: couldn't parse config at ''!
[  201.191858] netconsole: cleaning up
[  201.209950] init: Service 'exec 14 (/system/bin/logwrapper)' (pid
4357) exited with status 0
[  201.294928] netpoll: netconsole: couldn't parse config at ''!
[  201.294932] netconsole: cleaning up
[  202.198914] netpoll: netconsole: couldn't parse config at ''!
[  202.198916] netconsole: cleaning up
[  204.107075] wlan0: authenticate with b4:a8:98:22:f9:ac
[  204.110023] wlan0: send auth to b4:a8:98:22:f9:ac (try 1/3)
[  204.136950] wlan0: authenticated
[  204.138010] wlan0: associate with b4:a8:98:22:f9:ac (try 1/3)
[  204.140191] wlan0: RX AssocResp from b4:a8:98:22:f9:ac
(capab=0x1531 status=0 aid=4)
[  204.143640] wlan0: associated
root@localhost:/home/youling257#

2021-10-22 18:59 GMT+08:00, youling257 <youling257@gmail.com>:
> This patch cause suspend to disk resume usb not work, xhci_hcd 0000:00:14.0:
> Abort failed to stop command ring: -110.
>
> [  189.292054] PM: hibernation: hibernation entry
> [  189.295273] Filesystems sync: 0.000 seconds
> [  189.295281] Freezing user space processes ... (elapsed 0.003 seconds)
> done.
> [  189.298514] OOM killer disabled.
> [  189.298590] PM: hibernation: Marking nosave pages: [mem
> 0x00000000-0x00000fff]
> [  189.298594] PM: hibernation: Marking nosave pages: [mem
> 0x00058000-0x00058fff]
> [  189.298596] PM: hibernation: Marking nosave pages: [mem
> 0x0009f000-0x000fffff]
> [  189.298600] PM: hibernation: Marking nosave pages: [mem
> 0x00500000-0x005fffff]
> [  189.298607] PM: hibernation: Marking nosave pages: [mem
> 0x850d7000-0x850d8fff]
> [  189.298609] PM: hibernation: Marking nosave pages: [mem
> 0x8805d000-0x8809bfff]
> [  189.298612] PM: hibernation: Marking nosave pages: [mem
> 0x8ac24000-0x8ac24fff]
> [  189.298614] PM: hibernation: Marking nosave pages: [mem
> 0x8bea8000-0x8caeefff]
> [  189.298689] PM: hibernation: Marking nosave pages: [mem
> 0x8cb9a000-0x8d3fefff]
> [  189.298741] PM: hibernation: Marking nosave pages: [mem
> 0x8d400000-0xffffffff]
> [  189.300918] PM: hibernation: Basic memory bitmaps created
> [  189.301088] PM: hibernation: Preallocating image memory
> [  189.812115] PM: hibernation: Allocated 779311 pages for snapshot
> [  189.812118] PM: hibernation: Allocated 3117244 kbytes in 0.51 seconds
> (6112.24 MB/s)
> [  189.812121] Freezing remaining freezable tasks ... (elapsed 0.001
> seconds) done.
> [  189.813884] printk: Suspending console(s) (use no_console_suspend to
> debug)
> [  189.814016] wlan0: deauthenticating from b4:a8:98:22:f9:ac by local
> choice (Reason: 3=DEAUTH_LEAVING)
> [  189.814310] rtc_cmos 00:05: suspend, ctrl 02
> [  189.844670] r8169 0000:01:00.0 eth0: Link is Down
> [  190.081522] ACPI: PM: Preparing to enter system sleep state S4
> [  190.083051] ACPI: PM: Saving platform NVS memory
> [  190.087556] Disabling non-boot CPUs ...
> [  190.089802] smpboot: CPU 1 is now offline
> [  190.092841] smpboot: CPU 2 is now offline
> [  190.095235] smpboot: CPU 3 is now offline
> [  190.098592] smpboot: CPU 4 is now offline
> [  190.100660] smpboot: CPU 5 is now offline
> [  190.102967] smpboot: CPU 6 is now offline
> [  190.105047] smpboot: CPU 7 is now offline
> [  190.106828] PM: hibernation: Creating image:
> [  190.211897] PM: hibernation: Need to copy 775681 pages
> [  190.211898] PM: hibernation: Normal pages needed: 775681 + 1024,
> available pages: 1300224
> [  190.107012] ACPI: PM: Restoring platform NVS memory
> [  190.108184] Enabling non-boot CPUs ...
> [  190.108225] x86: Booting SMP configuration:
> [  190.108225] smpboot: Booting Node 0 Processor 1 APIC 0x2
> [  190.109416] CPU1 is up
> [  190.109440] smpboot: Booting Node 0 Processor 2 APIC 0x4
> [  190.110088] CPU2 is up
> [  190.110111] smpboot: Booting Node 0 Processor 3 APIC 0x6
> [  190.110775] CPU3 is up
> [  190.110799] smpboot: Booting Node 0 Processor 4 APIC 0x1
> [  190.111532] CPU4 is up
> [  190.111558] smpboot: Booting Node 0 Processor 5 APIC 0x3
> [  190.112280] CPU5 is up
> [  190.112303] smpboot: Booting Node 0 Processor 6 APIC 0x5
> [  190.113056] CPU6 is up
> [  190.113084] smpboot: Booting Node 0 Processor 7 APIC 0x7
> [  190.113886] CPU7 is up
> [  190.116276] ACPI: PM: Waking up from system sleep state S4
> [  190.187264] usb usb1: root hub lost power or was reset
> [  190.187296] usb usb2: root hub lost power or was reset
> [  190.188384] rtc_cmos 00:05: resume, ctrl 02
> [  190.189946] i915 0000:00:02.0: [drm] [ENCODER:94:DDI B/PHY B] is
> disabled/in DSI mode with an ungated DDI clock, gate it
> [  190.195185] nvme nvme0: 8/0/0 default/read/poll queues
> [  190.354168] r8169 0000:01:00.0 eth0: Link is Down
> [  190.526336] ata3: SATA link down (SStatus 4 SControl 300)
> [  190.526389] ata4: SATA link down (SStatus 4 SControl 300)
> [  191.214037] snd_hda_intel 0000:00:1f.3: azx_get_response timeout,
> switching to polling mode: last cmd=0x206f0015
> [  191.214047] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last
> cmd=0x206f0015
> [  191.214054] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last
> cmd=0x206f0015
> [  191.214058] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last
> cmd=0x206f0015
> [  191.214061] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last
> cmd=0x206f0015
> [  191.214064] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last
> cmd=0x206f0015
> [  191.214067] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last
> cmd=0x206f0015
> [  191.214070] snd_hda_intel 0000:00:1f.3: spurious response 0x200:0x2, last
> cmd=0x206f0015
> [  191.214073] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last
> cmd=0x206f0015
> [  191.214076] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last
> cmd=0x206f0015
> [  191.214079] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last
> cmd=0x206f0015
> [  192.216095] snd_hda_intel 0000:00:1f.3: No response from codec, disabling
> MSI: last cmd=0x20670100
> [  193.218095] snd_hda_intel 0000:00:1f.3: azx_get_response timeout,
> switching to single_cmd mode: last cmd=0x20670100
> [  193.547924] r8169 0000:01:00.0 eth0: Link is Up - 1Gbps/Full - flow
> control off
> [  200.640141] xhci_hcd 0000:00:14.0: Abort failed to stop command ring:
> -110
> [  200.640148] xhci_hcd 0000:00:14.0: xHCI host controller not responding,
> assume dead
> [  200.640151] xhci_hcd 0000:00:14.0: HC died; cleaning up
> [  200.640165] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device
> command
> [  201.056143] usb 2-1: device not accepting address 2, error -22
> [  201.058193] PM: hibernation: Basic memory bitmaps freed
> [  201.058197] OOM killer enabled.
> [  201.058197] Restarting tasks ...
> [  201.058212] usb 2-1: USB disconnect, device number 2
>

Re: [PATCH 4/5] xhci: Fix command ring pointer corruption while aborting a command

[Mathias Nyman]

Hi

>> This patch cause suspend to disk resume usb not work, xhci_hcd 0000:00:14.0:
>> Abort failed to stop command ring: -110.

Thanks for the report, this is odd.

Could you double check that by reverting this patch resume start working again.

If this is the case maybe we need to write all 64bits before this xHC hardware reacts to
CRCR register changes.

Maybe following changes on top of current patch could help:

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 311597bba80e..32665637d5e5 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -366,7 +366,7 @@ static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
 /* Must be called with xhci->lock held, releases and aquires lock back */
 static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
 {
-	u32 temp_32;
+	u64 crcr;
	int ret;
 
	xhci_dbg(xhci, "Abort command ring\n");
@@ -375,13 +375,15 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
 
	/*
	 * The control bits like command stop, abort are located in lower
-	 * dword of the command ring control register. Limit the write
-	 * to the lower dword to avoid corrupting the command ring pointer
-        * in case if the command ring is stopped by the time upper dword
-	 * is written.
+	 * dword of the command ring control register. Some hw require all
+	 * 64 bits to be written, starting with lower dword.
+	 * Make sure the upper dword is valid to avoid corrupting the command
+	 * ring pointer in case if the command ring is stopped by the time upper
+	 * dword is written.
	 */
-	temp_32 = readl(&xhci->op_regs->cmd_ring);
-	writel(temp_32 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
+	crcr = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
+				    xhci->cmd_ring->dequeue);
+	xhci_write_64(xhci, crcr | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);

	/* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the
	 * completion of the Command Abort operation. If CRR is not negated in 5

-Mathias

Re: [PATCH 4/5] xhci: Fix command ring pointer corruption while aborting a command

[youling 257]

test this patch suspend resume usb can work.

2021-10-25 19:21 GMT+08:00, Mathias Nyman <mathias.nyman@linux.intel.com>:
> Hi
>
>>> This patch cause suspend to disk resume usb not work, xhci_hcd
>>> 0000:00:14.0:
>>> Abort failed to stop command ring: -110.
>
> Thanks for the report, this is odd.
>
> Could you double check that by reverting this patch resume start working
> again.
>
> If this is the case maybe we need to write all 64bits before this xHC
> hardware reacts to
> CRCR register changes.
>
> Maybe following changes on top of current patch could help:
>
> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
> index 311597bba80e..32665637d5e5 100644
> --- a/drivers/usb/host/xhci-ring.c
> +++ b/drivers/usb/host/xhci-ring.c
> @@ -366,7 +366,7 @@ static void xhci_handle_stopped_cmd_ring(struct xhci_hcd
> *xhci,
>  /* Must be called with xhci->lock held, releases and aquires lock back */
>  static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
>  {
> -	u32 temp_32;
> +	u64 crcr;
> 	int ret;
>
> 	xhci_dbg(xhci, "Abort command ring\n");
> @@ -375,13 +375,15 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci,
> unsigned long flags)
>
> 	/*
> 	 * The control bits like command stop, abort are located in lower
> -	 * dword of the command ring control register. Limit the write
> -	 * to the lower dword to avoid corrupting the command ring pointer
> -        * in case if the command ring is stopped by the time upper dword
> -	 * is written.
> +	 * dword of the command ring control register. Some hw require all
> +	 * 64 bits to be written, starting with lower dword.
> +	 * Make sure the upper dword is valid to avoid corrupting the command
> +	 * ring pointer in case if the command ring is stopped by the time upper
> +	 * dword is written.
> 	 */
> -	temp_32 = readl(&xhci->op_regs->cmd_ring);
> -	writel(temp_32 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
> +	crcr = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
> +				    xhci->cmd_ring->dequeue);
> +	xhci_write_64(xhci, crcr | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
>
> 	/* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the
> 	 * completion of the Command Abort operation. If CRR is not negated in 5
>
> -Mathias
>

Re: [PATCH 4/5] xhci: Fix command ring pointer corruption while aborting a command

[Mathias Nyman]

On 25.10.2021 18.01, youling 257 wrote:
> test this patch suspend resume usb can work.

Great, thanks.

Pavankumar Kondeti, does your case still work after this modification? 

-Mathias

Re: [PATCH 4/5] xhci: Fix command ring pointer corruption while aborting a command

[Pavan Kondeti]

On Mon, Oct 25, 2021 at 06:21:00PM +0300, Mathias Nyman wrote:
> On 25.10.2021 18.01, youling 257 wrote:
> > test this patch suspend resume usb can work.
> 
> Great, thanks.
> 
> Pavankumar Kondeti, does your case still work after this modification? 
> 
> 
Hi Mathias,


+	crcr = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
+				    xhci->cmd_ring->dequeue);
+	xhci_write_64(xhci, crcr | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);

This patch passes my test. Can you please clarify the below question that is
bothering me.

Here crcr points to the DMA address of the command which is getting
executed (soon will be aborted) by the xHC. After the ring is stopped,
we want xHC to execute the *next* command.

Is it guaranteed that the upper 32 bits of previous and next commands will
be same? Because when the issue happens, xHC takes the 32 bits of crcr
variable and update it's internal pointer from which it will fetch the commands
next time the ring is started. I think it is guaranteed because the upper 32
bits only may change when we cross the segments but in which case there will
be a link TRB in the middle. Since xHC command ring is stopped, it won't be
fetching the link TRB until door bell is rung again. Is my understanding correct?

Also, what if there is a race with xHC just finishing this command (which we
are currently aborting) and next link TRB is traversed and processing the next
command in a different segment. For some reason, we could not update our
deq pointer and in middle of aborting the command (which is already completed)
and updating the higher 32 bit with the previous deq segment. This is a
hypothetical question as we are only using 1 segment for the command ring.

Thanks,
Pavan


-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

Re: [PATCH 4/5] xhci: Fix command ring pointer corruption while aborting a command

[Mathias Nyman]

> This patch passes my test. Can you please clarify the below question that is
> bothering me.

Sure, currently this works as we only have one command ring segment.
But lets look at a theoretical case with two segments far apart where
the last command on a segment is aborted

> 
> Here crcr points to the DMA address of the command which is getting
> executed (soon will be aborted) by the xHC. After the ring is stopped,
> we want xHC to execute the *next* command.
> 
> Is it guaranteed that the upper 32 bits of previous and next commands will
> be same? Because when the issue happens, xHC takes the 32 bits of crcr
> variable and update it's internal pointer from which it will fetch the commands
> next time the ring is started. I think it is guaranteed because the upper 32
> bits only may change when we cross the segments but in which case there will
> be a link TRB in the middle. Since xHC command ring is stopped, it won't be
> fetching the link TRB until door bell is rung again. Is my understanding correct?

Good point. 

This could be an issue as xHC will move the internal pointer to the next
command TRB (past link) right after generating a "command aborted" event,
before generating the "command ring stopped" event. The command ring stopped
event should thus point to the next command TRB to handle.

I'll assume that the "command aborted" and "command ring stopped" events are generated
before xHC updates the internal pointer based on CRCR write.

The CRCR write may thus move the internal dequeue pointer back to previous segment.

This may mess things up, even if the interrupt handler turns the aborted command TRB
to a no-op, it's possible the partial CRCR update could cause internal pointer to 
point to first command of old segment. 

> 
> Also, what if there is a race with xHC just finishing this command (which we
> are currently aborting) and next link TRB is traversed and processing the next
> command in a different segment. For some reason, we could not update our
> deq pointer and in middle of aborting the command (which is already completed)
> and updating the higher 32 bit with the previous deq segment. This is a
> hypothetical question as we are only using 1 segment for the command ring.

In this case we won't see the "command aborted" event. Only a "command ring
stopped" event. and yes, the CRCR write could cause the internal dequeue pointer
to be moved back to the old segment, and we have the same issues as in the 
previous case.

These two cases could probably solved by writing the next command pointer to CRCR
instead.

Only problem I see with this is if xHC hasn't even fetched the command TRB we are
aborting. Then ring will stop at this last command TRB on segment.
Writing the next command TRB pointer to CRCR forces xHC to move to the next
segment without xHC processing the Link TRB, and cycle bit might get out of sync.

Hard to imagine how we end up in this situation.  

Then there is the third case where xHC handled multiple command TRBs, but interrupts
are blocked so driver is unaware of their completion.
Here its possible we write the wrong segment to CRCR even if we use the next
command TRB pointer. xHC could be way past what driver thinks is the next command.

For this case we proably need to check for pending interrupts and unhandled command
completions on the event ring before aborting the command.
But that is probably another patch.

But for now the best solution seems to be just to write next command TRB
pointer to CRCR during abort.

Thanks
-Mathias

Re: [PATCH 4/5] xhci: Fix command ring pointer corruption while aborting a command

[Pavan Kondeti]

On Wed, Oct 27, 2021 at 04:59:11PM +0300, Mathias Nyman wrote:
> > This patch passes my test. Can you please clarify the below question that is
> > bothering me.
> 
> Sure, currently this works as we only have one command ring segment.
> But lets look at a theoretical case with two segments far apart where
> the last command on a segment is aborted
> 
> > 
> > Here crcr points to the DMA address of the command which is getting
> > executed (soon will be aborted) by the xHC. After the ring is stopped,
> > we want xHC to execute the *next* command.
> > 
> > Is it guaranteed that the upper 32 bits of previous and next commands will
> > be same? Because when the issue happens, xHC takes the 32 bits of crcr
> > variable and update it's internal pointer from which it will fetch the commands
> > next time the ring is started. I think it is guaranteed because the upper 32
> > bits only may change when we cross the segments but in which case there will
> > be a link TRB in the middle. Since xHC command ring is stopped, it won't be
> > fetching the link TRB until door bell is rung again. Is my understanding correct?
> 
> Good point. 
> 
> This could be an issue as xHC will move the internal pointer to the next
> command TRB (past link) right after generating a "command aborted" event,
> before generating the "command ring stopped" event. The command ring stopped
> event should thus point to the next command TRB to handle.
> 
> I'll assume that the "command aborted" and "command ring stopped" events are generated
> before xHC updates the internal pointer based on CRCR write.
> 
> The CRCR write may thus move the internal dequeue pointer back to previous segment.
> 
> This may mess things up, even if the interrupt handler turns the aborted command TRB
> to a no-op, it's possible the partial CRCR update could cause internal pointer to 
> point to first command of old segment. 
> 
> > 
> > Also, what if there is a race with xHC just finishing this command (which we
> > are currently aborting) and next link TRB is traversed and processing the next
> > command in a different segment. For some reason, we could not update our
> > deq pointer and in middle of aborting the command (which is already completed)
> > and updating the higher 32 bit with the previous deq segment. This is a
> > hypothetical question as we are only using 1 segment for the command ring.
> 
> In this case we won't see the "command aborted" event. Only a "command ring
> stopped" event. and yes, the CRCR write could cause the internal dequeue pointer
> to be moved back to the old segment, and we have the same issues as in the 
> previous case.
> 
> These two cases could probably solved by writing the next command pointer to CRCR
> instead.
> 
> Only problem I see with this is if xHC hasn't even fetched the command TRB we are
> aborting. Then ring will stop at this last command TRB on segment.
> Writing the next command TRB pointer to CRCR forces xHC to move to the next
> segment without xHC processing the Link TRB, and cycle bit might get out of sync.
> 
> Hard to imagine how we end up in this situation.  
> 
> Then there is the third case where xHC handled multiple command TRBs, but interrupts
> are blocked so driver is unaware of their completion.
> Here its possible we write the wrong segment to CRCR even if we use the next
> command TRB pointer. xHC could be way past what driver thinks is the next command.
> 
> For this case we proably need to check for pending interrupts and unhandled command
> completions on the event ring before aborting the command.
> But that is probably another patch.
> 
> But for now the best solution seems to be just to write next command TRB
> pointer to CRCR during abort.
> 
Thanks Mathias for the detailed explanation. Agree that your patch is good
enough for the current situation. May be a TODO comment here would help. 

Thanks,
Pavan

Re: [PATCH 4/5] xhci: Fix command ring pointer corruption while aborting a command

[Mathias Nyman]

> Thanks Mathias for the detailed explanation. Agree that your patch is good
> enough for the current situation. May be a TODO comment here would help. 
> 

Changed the patch to write the _next_ command instead of the current to CRCR.

Pavan, youling 257, I'd appreciate if you could give this one more patch a try.
Your cases are hard to reprodudce with my setup.

And if it works can I add your "Tested-by:" tags to it?

Thanks, 
-Mathias

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 311597bba80e..eaa49aef2935 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -366,7 +366,9 @@ static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
 /* Must be called with xhci->lock held, releases and aquires lock back */
 static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
 {
-	u32 temp_32;
+	struct xhci_segment *new_seg    = xhci->cmd_ring->deq_seg;
+	union xhci_trb *new_deq         = xhci->cmd_ring->dequeue;
+	u64 crcr;
	int ret;

	xhci_dbg(xhci, "Abort command ring\n");
@@ -375,13 +377,18 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)

	/*
	 * The control bits like command stop, abort are located in lower
-	 * dword of the command ring control register. Limit the write
-	 * to the lower dword to avoid corrupting the command ring pointer
-	 * in case if the command ring is stopped by the time upper dword
-	 * is written.
+	 * dword of the command ring control register.
+	 * Some controllers require all 64 bits to be written to abort the ring.
+	 * Make sure the upper dword is valid, pointing to the next command,
+	 * avoiding corrupting the command ring pointer in case the command ring
+	 * is stopped by the time the upper dword is written.
	 */
-	temp_32 = readl(&xhci->op_regs->cmd_ring);
-	writel(temp_32 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
+	next_trb(xhci, NULL, &new_seg, &new_deq);
+	if (trb_is_link(new_deq))
+		next_trb(xhci, NULL, &new_seg, &new_deq);
+
+	crcr = xhci_trb_virt_to_dma(new_seg, new_deq);
+	xhci_write_64(xhci, crcr | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);

	/* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the
	 * completion of the Command Abort operation. If CRR is not negated in 5

[RFT PATCH] xhci: Fix commad ring abort, write all 64 bits to CRCR register.

[Mathias Nyman]

Turns out some xHC controllers require all 64 bits in the CRCR register
to be written to execute a command abort.

The lower 32 bits containing the command abort bit is written first.
In case the command ring stops before we write the upper 32 bits then
hardware may use these upper bits to set the commnd ring dequeue pointer.

Solve this by making sure the upper 32 bits contain a valid command
ring dequeue pointer.

The original patch that only wrote the first 32 to stop the ring went
to stable, so this fix should go there as well.

Fixes: ff0e50d3564f ("xhci: Fix command ring pointer corruption while aborting a command")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-ring.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 311597bba80e..eaa49aef2935 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -366,7 +366,9 @@ static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
 /* Must be called with xhci->lock held, releases and aquires lock back */
 static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
 {
-	u32 temp_32;
+	struct xhci_segment *new_seg	= xhci->cmd_ring->deq_seg;
+	union xhci_trb *new_deq		= xhci->cmd_ring->dequeue;
+	u64 crcr;
 	int ret;
 
 	xhci_dbg(xhci, "Abort command ring\n");
@@ -375,13 +377,18 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
 
 	/*
 	 * The control bits like command stop, abort are located in lower
-	 * dword of the command ring control register. Limit the write
-	 * to the lower dword to avoid corrupting the command ring pointer
-	 * in case if the command ring is stopped by the time upper dword
-	 * is written.
+	 * dword of the command ring control register.
+	 * Some controllers require all 64 bits to be written to abort the ring.
+	 * Make sure the upper dword is valid, pointing to the next command,
+	 * avoiding corrupting the command ring pointer in case the command ring
+	 * is stopped by the time the upper dword is written.
 	 */
-	temp_32 = readl(&xhci->op_regs->cmd_ring);
-	writel(temp_32 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
+	next_trb(xhci, NULL, &new_seg, &new_deq);
+	if (trb_is_link(new_deq))
+		next_trb(xhci, NULL, &new_seg, &new_deq);
+
+	crcr = xhci_trb_virt_to_dma(new_seg, new_deq);
+	xhci_write_64(xhci, crcr | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
 
 	/* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the
 	 * completion of the Command Abort operation. If CRR is not negated in 5
-- 
2.25.1

Re: [RFT PATCH] xhci: Fix commad ring abort, write all 64 bits to CRCR register.

[youling 257]

test it can work for me.

2021-10-29 20:51 GMT+08:00, Mathias Nyman <mathias.nyman@linux.intel.com>:
> Turns out some xHC controllers require all 64 bits in the CRCR register
> to be written to execute a command abort.
>
> The lower 32 bits containing the command abort bit is written first.
> In case the command ring stops before we write the upper 32 bits then
> hardware may use these upper bits to set the commnd ring dequeue pointer.
>
> Solve this by making sure the upper 32 bits contain a valid command
> ring dequeue pointer.
>
> The original patch that only wrote the first 32 to stop the ring went
> to stable, so this fix should go there as well.
>
> Fixes: ff0e50d3564f ("xhci: Fix command ring pointer corruption while
> aborting a command")
> Cc: stable@vger.kernel.org
> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
> ---
>  drivers/usb/host/xhci-ring.c | 21 ++++++++++++++-------
>  1 file changed, 14 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
> index 311597bba80e..eaa49aef2935 100644
> --- a/drivers/usb/host/xhci-ring.c
> +++ b/drivers/usb/host/xhci-ring.c
> @@ -366,7 +366,9 @@ static void xhci_handle_stopped_cmd_ring(struct xhci_hcd
> *xhci,
>  /* Must be called with xhci->lock held, releases and aquires lock back */
>  static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
>  {
> -	u32 temp_32;
> +	struct xhci_segment *new_seg	= xhci->cmd_ring->deq_seg;
> +	union xhci_trb *new_deq		= xhci->cmd_ring->dequeue;
> +	u64 crcr;
>  	int ret;
>
>  	xhci_dbg(xhci, "Abort command ring\n");
> @@ -375,13 +377,18 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci,
> unsigned long flags)
>
>  	/*
>  	 * The control bits like command stop, abort are located in lower
> -	 * dword of the command ring control register. Limit the write
> -	 * to the lower dword to avoid corrupting the command ring pointer
> -	 * in case if the command ring is stopped by the time upper dword
> -	 * is written.
> +	 * dword of the command ring control register.
> +	 * Some controllers require all 64 bits to be written to abort the ring.
> +	 * Make sure the upper dword is valid, pointing to the next command,
> +	 * avoiding corrupting the command ring pointer in case the command ring
> +	 * is stopped by the time the upper dword is written.
>  	 */
> -	temp_32 = readl(&xhci->op_regs->cmd_ring);
> -	writel(temp_32 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
> +	next_trb(xhci, NULL, &new_seg, &new_deq);
> +	if (trb_is_link(new_deq))
> +		next_trb(xhci, NULL, &new_seg, &new_deq);
> +
> +	crcr = xhci_trb_virt_to_dma(new_seg, new_deq);
> +	xhci_write_64(xhci, crcr | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
>
>  	/* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the
>  	 * completion of the Command Abort operation. If CRR is not negated in 5
> --
> 2.25.1
>
>

Re: [RFT PATCH] xhci: Fix commad ring abort, write all 64 bits to CRCR register.

[Mathias Nyman]

On 29.10.2021 18.35, youling 257 wrote:
> test it can work for me.
> 

Thanks for testing

-Mathias

Re: [RFT PATCH] xhci: Fix commad ring abort, write all 64 bits to CRCR register.

[Pavan Kondeti]

Hi Mathias,

On Fri, Oct 29, 2021 at 03:51:54PM +0300, Mathias Nyman wrote:
> Turns out some xHC controllers require all 64 bits in the CRCR register
> to be written to execute a command abort.
> 
> The lower 32 bits containing the command abort bit is written first.
> In case the command ring stops before we write the upper 32 bits then
> hardware may use these upper bits to set the commnd ring dequeue pointer.
> 
> Solve this by making sure the upper 32 bits contain a valid command
> ring dequeue pointer.
> 
> The original patch that only wrote the first 32 to stop the ring went
> to stable, so this fix should go there as well.
> 
> Fixes: ff0e50d3564f ("xhci: Fix command ring pointer corruption while aborting a command")
> Cc: stable@vger.kernel.org
> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
> ---
>  drivers/usb/host/xhci-ring.c | 21 ++++++++++++++-------
>  1 file changed, 14 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
> index 311597bba80e..eaa49aef2935 100644
> --- a/drivers/usb/host/xhci-ring.c
> +++ b/drivers/usb/host/xhci-ring.c
> @@ -366,7 +366,9 @@ static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
>  /* Must be called with xhci->lock held, releases and aquires lock back */
>  static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
>  {
> -	u32 temp_32;
> +	struct xhci_segment *new_seg	= xhci->cmd_ring->deq_seg;
> +	union xhci_trb *new_deq		= xhci->cmd_ring->dequeue;
> +	u64 crcr;
>  	int ret;
>  
>  	xhci_dbg(xhci, "Abort command ring\n");
> @@ -375,13 +377,18 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
>  
>  	/*
>  	 * The control bits like command stop, abort are located in lower
> -	 * dword of the command ring control register. Limit the write
> -	 * to the lower dword to avoid corrupting the command ring pointer
> -	 * in case if the command ring is stopped by the time upper dword
> -	 * is written.
> +	 * dword of the command ring control register.
> +	 * Some controllers require all 64 bits to be written to abort the ring.
> +	 * Make sure the upper dword is valid, pointing to the next command,
> +	 * avoiding corrupting the command ring pointer in case the command ring
> +	 * is stopped by the time the upper dword is written.
>  	 */
> -	temp_32 = readl(&xhci->op_regs->cmd_ring);
> -	writel(temp_32 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
> +	next_trb(xhci, NULL, &new_seg, &new_deq);
> +	if (trb_is_link(new_deq))
> +		next_trb(xhci, NULL, &new_seg, &new_deq);
> +
> +	crcr = xhci_trb_virt_to_dma(new_seg, new_deq);
> +	xhci_write_64(xhci, crcr | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
>  
>  	/* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the
>  	 * completion of the Command Abort operation. If CRR is not negated in 5

Thanks for the patch. I don't see any issues with this patch.

Feel free to add

Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>

Thanks,
Pavan

Re: [RFT PATCH] xhci: Fix commad ring abort, write all 64 bits to CRCR register.

[Mathias Nyman]

On 1.11.2021 5.31, Pavan Kondeti wrote:

> Thanks for the patch. I don't see any issues with this patch.
> 
> Feel free to add
> 
> Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
> 

Thanks, will do

-Mathias

[PATCH 5/5] xhci: Enable trust tx length quirk for Fresco FL11 USB controller

[Mathias Nyman]

From: Nikolay Martynov <mar.kolya@gmail.com>

Tested on SD5200T TB3 dock which has Fresco Logic FL1100 USB 3.0 Host
Controller.
Before this patch streaming video from USB cam made mouse and keyboard
connected to the same USB bus unusable. Also video was jerky.
With this patch streaming video doesn't have any effect on other
periferals and video is smooth.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-pci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 633413d78380..2484a9d38ce2 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -30,6 +30,7 @@
 #define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000
 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009	0x1009
+#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1100	0x1100
 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400	0x1400
 
 #define PCI_VENDOR_ID_ETRON		0x1b6f
@@ -113,6 +114,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	/* Look for vendor-specific quirks */
 	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
 			(pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK ||
+			 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1100 ||
 			 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) {
 		if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
 				pdev->revision == 0x0) {
-- 
2.25.1

Re: [PATCH 0/5] xhci fixes for usb-linus

[Greg KH]

On Fri, Oct 08, 2021 at 12:25:42PM +0300, Mathias Nyman wrote:
> Hi Greg
> 
> A few xhci fixes for 5.15-rc.
> A couple races fixed, and quirks added for a couple hosts.

I'll pick these up after Linus takes my latest pull request, these were
too late to get into linux-next this week for testing.

thanks,

greg k-h