All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: dri-devel@lists.freedesktop.org
Cc: Marek Vasut <marex@denx.de>, Robert Foss <robert.foss@linaro.org>,
	Maxime Ripard <maxime@cerno.tech>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Sam Ravnborg <sam@ravnborg.org>,
	Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH V3 11/13] drm: bridge: icn6211: Add I2C configuration support
Date: Fri,  4 Mar 2022 01:25:06 +0100	[thread overview]
Message-ID: <20220304002508.75676-12-marex@denx.de> (raw)
In-Reply-To: <20220304002508.75676-1-marex@denx.de>

The ICN6211 chip starts in I2C configuration mode after cold boot.
Implement support for configuring the chip via I2C in addition to
the current DSI LP command mode configuration support. The later
seems to be available only on chips which have additional MCU on
the panel/bridge board which preconfigures the ICN6211, while the
I2C configuration mode added by this patch does not require any
such MCU.

Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
---
V2: - Drop the abridge variable
    - Rename chipone_dsi_setup to chipone_dsi_host_attach and call
      it from chipone_i2c_probe()
V3: Add AB from Maxime
---
 drivers/gpu/drm/bridge/chipone-icn6211.c | 183 ++++++++++++++++++++---
 1 file changed, 161 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/bridge/chipone-icn6211.c b/drivers/gpu/drm/bridge/chipone-icn6211.c
index afc619e215c3b..4ad149c13f599 100644
--- a/drivers/gpu/drm/bridge/chipone-icn6211.c
+++ b/drivers/gpu/drm/bridge/chipone-icn6211.c
@@ -11,6 +11,7 @@
 
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/regulator/consumer.h>
@@ -133,15 +134,18 @@
 
 struct chipone {
 	struct device *dev;
+	struct i2c_client *client;
 	struct drm_bridge bridge;
 	struct drm_display_mode mode;
 	struct drm_bridge *panel_bridge;
 	struct device_node *host_node;
+	struct mipi_dsi_device *dsi;
 	struct gpio_desc *enable_gpio;
 	struct regulator *vdd1;
 	struct regulator *vdd2;
 	struct regulator *vdd3;
 	int dsi_lanes;
+	bool interface_i2c;
 };
 
 static inline struct chipone *bridge_to_chipone(struct drm_bridge *bridge)
@@ -152,9 +156,10 @@ static inline struct chipone *bridge_to_chipone(struct drm_bridge *bridge)
 static inline int chipone_dsi_write(struct chipone *icn,  const void *seq,
 				    size_t len)
 {
-	struct mipi_dsi_device *dsi = to_mipi_dsi_device(icn->dev);
-
-	return mipi_dsi_generic_write(dsi, seq, len);
+	if (icn->interface_i2c)
+		i2c_smbus_write_byte_data(icn->client, reg, val);
+	else
+		mipi_dsi_generic_write(icn->dsi, (u8[]){reg, val}, 2);
 }
 
 #define ICN6211_DSI(icn, seq...)				\
@@ -259,7 +264,10 @@ static void chipone_atomic_enable(struct drm_bridge *bridge,
 	bridge_state = drm_atomic_get_new_bridge_state(state, bridge);
 	bus_flags = bridge_state->output_bus_cfg.flags;
 
-	ICN6211_DSI(icn, MIPI_CFG_PW, MIPI_CFG_PW_CONFIG_DSI);
+	if (icn->interface_i2c)
+		ICN6211_DSI(icn, MIPI_CFG_PW, MIPI_CFG_PW_CONFIG_I2C);
+	else
+		ICN6211_DSI(icn, MIPI_CFG_PW, MIPI_CFG_PW_CONFIG_DSI);
 
 	ICN6211_DSI(icn, HACTIVE_LI, mode->hdisplay & 0xff);
 
@@ -380,6 +388,57 @@ static void chipone_mode_set(struct drm_bridge *bridge,
 	struct chipone *icn = bridge_to_chipone(bridge);
 
 	drm_mode_copy(&icn->mode, adjusted_mode);
+};
+
+static int chipone_dsi_attach(struct chipone *icn)
+{
+	struct mipi_dsi_device *dsi = icn->dsi;
+	int ret;
+
+	dsi->lanes = icn->dsi_lanes;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET;
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0)
+		dev_err(icn->dev, "failed to attach dsi\n");
+
+	return ret;
+}
+
+static int chipone_dsi_host_attach(struct chipone *icn)
+{
+	struct device *dev = icn->dev;
+	struct mipi_dsi_device *dsi;
+	struct mipi_dsi_host *host;
+	int ret = 0;
+
+	const struct mipi_dsi_device_info info = {
+		.type = "chipone",
+		.channel = 0,
+		.node = NULL,
+	};
+
+	host = of_find_mipi_dsi_host_by_node(icn->host_node);
+	if (!host) {
+		dev_err(dev, "failed to find dsi host\n");
+		return -EPROBE_DEFER;
+	}
+
+	dsi = mipi_dsi_device_register_full(host, &info);
+	if (IS_ERR(dsi)) {
+		return dev_err_probe(dev, PTR_ERR(dsi),
+				     "failed to create dsi device\n");
+	}
+
+	icn->dsi = dsi;
+
+	ret = chipone_dsi_attach(icn);
+	if (ret < 0)
+		mipi_dsi_device_unregister(dsi);
+
+	return ret;
 }
 
 static int chipone_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags)
@@ -506,9 +565,8 @@ static int chipone_parse_dt(struct chipone *icn)
 	return ret;
 }
 
-static int chipone_probe(struct mipi_dsi_device *dsi)
+static int chipone_common_probe(struct device *dev, struct chipone **icnr)
 {
-	struct device *dev = &dsi->dev;
 	struct chipone *icn;
 	int ret;
 
@@ -516,7 +574,6 @@ static int chipone_probe(struct mipi_dsi_device *dsi)
 	if (!icn)
 		return -ENOMEM;
 
-	mipi_dsi_set_drvdata(dsi, icn);
 	icn->dev = dev;
 
 	ret = chipone_parse_dt(icn);
@@ -527,29 +584,77 @@ static int chipone_probe(struct mipi_dsi_device *dsi)
 	icn->bridge.type = DRM_MODE_CONNECTOR_DPI;
 	icn->bridge.of_node = dev->of_node;
 
-	drm_bridge_add(&icn->bridge);
+	*icnr = icn;
 
-	dsi->lanes = icn->dsi_lanes;
-	dsi->format = MIPI_DSI_FMT_RGB888;
-	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
-			  MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET;
+	return ret;
+}
 
-	ret = mipi_dsi_attach(dsi);
-	if (ret < 0) {
+static int chipone_dsi_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct chipone *icn;
+	int ret;
+
+	ret = chipone_common_probe(dev, &icn);
+	if (ret)
+		return ret;
+
+	icn->interface_i2c = false;
+	icn->dsi = dsi;
+
+	mipi_dsi_set_drvdata(dsi, icn);
+
+	drm_bridge_add(&icn->bridge);
+
+	ret = chipone_dsi_attach(icn);
+	if (ret)
 		drm_bridge_remove(&icn->bridge);
-		dev_err(dev, "failed to attach dsi\n");
-	}
 
 	return ret;
 }
 
-static int chipone_remove(struct mipi_dsi_device *dsi)
+static int chipone_i2c_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct chipone *icn;
+	int ret;
+
+	ret = chipone_common_probe(dev, &icn);
+	if (ret)
+		return ret;
+
+	icn->interface_i2c = true;
+	icn->client = client;
+	dev_set_drvdata(dev, icn);
+	i2c_set_clientdata(client, icn);
+
+	drm_bridge_add(&icn->bridge);
+
+	return chipone_dsi_host_attach(icn);
+}
+
+static void chipone_common_remove(struct chipone *icn)
+{
+	of_node_put(icn->host_node);
+}
+
+static int chipone_dsi_remove(struct mipi_dsi_device *dsi)
 {
 	struct chipone *icn = mipi_dsi_get_drvdata(dsi);
 
 	mipi_dsi_detach(dsi);
 	drm_bridge_remove(&icn->bridge);
-	of_node_put(icn->host_node);
+	chipone_common_remove(icn);
+
+	return 0;
+}
+
+static int chipone_i2c_remove(struct i2c_client *client)
+{
+	struct chipone *icn = i2c_get_clientdata(client);
+
+	chipone_common_remove(icn);
 
 	return 0;
 }
@@ -560,16 +665,50 @@ static const struct of_device_id chipone_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, chipone_of_match);
 
-static struct mipi_dsi_driver chipone_driver = {
-	.probe = chipone_probe,
-	.remove = chipone_remove,
+static struct mipi_dsi_driver chipone_dsi_driver = {
+	.probe = chipone_dsi_probe,
+	.remove = chipone_dsi_remove,
 	.driver = {
 		.name = "chipone-icn6211",
 		.owner = THIS_MODULE,
 		.of_match_table = chipone_of_match,
 	},
 };
-module_mipi_dsi_driver(chipone_driver);
+
+static struct i2c_device_id chipone_i2c_id[] = {
+	{ "chipone,icn6211" },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, chipone_i2c_id);
+
+static struct i2c_driver chipone_i2c_driver = {
+	.probe = chipone_i2c_probe,
+	.remove = chipone_i2c_remove,
+	.id_table = chipone_i2c_id,
+	.driver = {
+		.name = "chipone-icn6211-i2c",
+		.owner = THIS_MODULE,
+		.of_match_table = chipone_of_match,
+	},
+};
+
+static int __init chipone_init(void)
+{
+	if (IS_ENABLED(CONFIG_DRM_MIPI_DSI))
+		mipi_dsi_driver_register(&chipone_dsi_driver);
+
+	return i2c_add_driver(&chipone_i2c_driver);
+}
+module_init(chipone_init);
+
+static void __init chipone_exit(void)
+{
+	i2c_del_driver(&chipone_i2c_driver);
+
+	if (IS_ENABLED(CONFIG_DRM_MIPI_DSI))
+		mipi_dsi_driver_unregister(&chipone_dsi_driver);
+}
+module_exit(chipone_exit);
 
 MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>");
 MODULE_DESCRIPTION("Chipone ICN6211 MIPI-DSI to RGB Converter Bridge");
-- 
2.34.1


  parent reply	other threads:[~2022-03-04  0:26 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-04  0:24 [PATCH V3 00/13] drm: bridge: icn6211: Fix hard-coded panel settings and add I2C support Marek Vasut
2022-03-04  0:24 ` [PATCH V3 01/13] dt-bindings: display: bridge: icn6211: Document DSI data-lanes property Marek Vasut
2022-03-04  0:24   ` Marek Vasut
2022-03-07 23:32   ` Rob Herring
2022-03-07 23:32     ` Rob Herring
2022-03-08 12:45   ` Maxime Ripard
2022-03-08 12:45     ` Maxime Ripard
2022-03-04  0:24 ` [PATCH V3 02/13] drm: bridge: icn6211: Fix register layout Marek Vasut
2022-03-04  0:24 ` [PATCH V3 03/13] drm: bridge: icn6211: Fix HFP_HSW_HBP_HI and HFP_MIN handling Marek Vasut
2022-03-04  0:24 ` [PATCH V3 04/13] drm: bridge: icn6211: Add HS/VS/DE polarity handling Marek Vasut
2022-03-08 12:46   ` Maxime Ripard
2022-03-04  0:25 ` [PATCH V3 05/13] drm: bridge: icn6211: Add DSI lane count DT property parsing Marek Vasut
2022-03-08  8:03   ` Jagan Teki
2022-03-08  9:49     ` Marek Vasut
2022-03-08 10:07       ` Jagan Teki
2022-03-08 10:29         ` Marek Vasut
2022-03-08 11:32           ` Jagan Teki
2022-03-08 12:51           ` Maxime Ripard
2022-03-08 13:27             ` Marek Vasut
2022-03-08 13:49               ` Maxime Ripard
2022-03-08 14:47                 ` Marek Vasut
2022-03-08 16:21                   ` Maxime Ripard
2022-03-08 21:41                     ` Marek Vasut
2022-03-10 10:53                       ` Maxime Ripard
2022-03-10 12:47                         ` Marek Vasut
2022-03-10 14:18                           ` Maxime Ripard
2022-03-11 10:36                             ` Marek Vasut
2022-03-11 16:29                               ` Maxime Ripard
2022-03-11 19:56                                 ` Marek Vasut
2022-03-11 20:35                                   ` Jagan Teki
2022-03-11 20:38                                     ` Jagan Teki
2022-03-11 21:11                                       ` Marek Vasut
2022-03-10 10:42             ` Laurent Pinchart
2022-03-10 10:57               ` Maxime Ripard
2022-03-10 11:16                 ` Laurent Pinchart
2022-03-10 14:23                   ` Maxime Ripard
2022-03-04  0:25 ` [PATCH V3 06/13] drm: bridge: icn6211: Add generic DSI-to-DPI PLL configuration Marek Vasut
2022-03-08  8:07   ` Jagan Teki
2022-03-08 10:11     ` Marek Vasut
2022-03-04  0:25 ` [PATCH V3 07/13] drm: bridge: icn6211: Use DSI burst mode without EoT and with LP command mode Marek Vasut
2022-03-04  0:25 ` [PATCH V3 08/13] drm: bridge: icn6211: Disable DPI color swap Marek Vasut
2022-03-04  0:25 ` [PATCH V3 09/13] drm: bridge: icn6211: Set SYS_CTRL_1 to value used in examples Marek Vasut
2022-03-04  0:25 ` [PATCH V3 10/13] drm: bridge: icn6211: Implement atomic_get_input_bus_fmts Marek Vasut
2022-03-04  0:25 ` Marek Vasut [this message]
2022-03-04  0:25 ` [PATCH V3 12/13] drm: bridge: icn6211: Rework ICN6211_DSI to chipone_writeb() Marek Vasut
2022-03-04  0:25 ` [PATCH V3 13/13] drm: bridge: icn6211: Read and validate chip IDs before configuration Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220304002508.75676-12-marex@denx.de \
    --to=marex@denx.de \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jagan@amarulasolutions.com \
    --cc=maxime@cerno.tech \
    --cc=robert.foss@linaro.org \
    --cc=sam@ravnborg.org \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.