[PATCH v2 0/4] spi: dt-bindings: qcom: convert qcom,spi-qup to DT schema

[PATCH v2 0/4] spi: dt-bindings: qcom: convert qcom,spi-qup to DT schema

[Krzysztof Kozlowski]

Hi,

Changes since v1
================
1. Fix path in com/qcom,gsbi.txt.
2. Merge clock-names in example, correct $ref path (Kuldeep).

Merging
=======
The DTS patches are independent and silence warnings pointed
out by schema.

Best regards,
Krzysztof

Cc: Kuldeep Singh <singh.kuldeep87k@gmail.com>

Krzysztof Kozlowski (4):
  ARM: dts: qcom: ipq4019: align dmas in SPI with DT schema
  arm64: dts: qcom: msm8916: align dmas in SPI with DT schema
  arm64: dts: qcom: qcs404: align clocks in SPI with DT schema
  spi: dt-bindings: qcom,spi-qup: convert to dtschema

 .../bindings/soc/qcom/qcom,gsbi.txt           |   2 +-
 .../devicetree/bindings/spi/qcom,spi-qup.txt  | 103 ------------------
 .../devicetree/bindings/spi/qcom,spi-qup.yaml |  81 ++++++++++++++
 arch/arm/boot/dts/qcom-ipq4019.dtsi           |   8 +-
 arch/arm64/boot/dts/qcom/msm8916.dtsi         |  24 ++--
 arch/arm64/boot/dts/qcom/qcs404.dtsi          |  36 +++---
 6 files changed, 116 insertions(+), 138 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
 create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml

-- 
2.32.0

[PATCH v2 1/4] ARM: dts: qcom: ipq4019: align dmas in SPI with DT schema

[Krzysztof Kozlowski]

The DT schema expects dma channels in tx-rx order.  No functional
change.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/qcom-ipq4019.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index a9d0566a3190..dc8260684aee 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -253,8 +253,8 @@ blsp1_spi1: spi@78b5000 { /* BLSP1 QUP1 */
 			clock-names = "core", "iface";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			dmas = <&blsp_dma 5>, <&blsp_dma 4>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -267,8 +267,8 @@ blsp1_spi2: spi@78b6000 { /* BLSP1 QUP2 */
 			clock-names = "core", "iface";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			dmas = <&blsp_dma 7>, <&blsp_dma 6>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
-- 
2.32.0

[PATCH v2 2/4] arm64: dts: qcom: msm8916: align dmas in SPI with DT schema

[Krzysztof Kozlowski]

The DT schema expects dma channels in tx-rx order.  No functional
change.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index e34963505e07..6e5e7883c747 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1529,8 +1529,8 @@ blsp_spi1: spi@78b5000 {
 			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp_dma 5>, <&blsp_dma 4>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&spi1_default>;
 			pinctrl-1 = <&spi1_sleep>;
@@ -1561,8 +1561,8 @@ blsp_spi2: spi@78b6000 {
 			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp_dma 7>, <&blsp_dma 6>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&spi2_default>;
 			pinctrl-1 = <&spi2_sleep>;
@@ -1593,8 +1593,8 @@ blsp_spi3: spi@78b7000 {
 			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp_dma 9>, <&blsp_dma 8>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+			dma-names = "tx", "rx";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&spi3_default>;
 			pinctrl-1 = <&spi3_sleep>;
@@ -1625,8 +1625,8 @@ blsp_spi4: spi@78b8000 {
 			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp_dma 11>, <&blsp_dma 10>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+			dma-names = "tx", "rx";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&spi4_default>;
 			pinctrl-1 = <&spi4_sleep>;
@@ -1657,8 +1657,8 @@ blsp_spi5: spi@78b9000 {
 			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp_dma 13>, <&blsp_dma 12>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+			dma-names = "tx", "rx";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&spi5_default>;
 			pinctrl-1 = <&spi5_sleep>;
@@ -1689,8 +1689,8 @@ blsp_spi6: spi@78ba000 {
 			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp_dma 15>, <&blsp_dma 14>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&spi6_default>;
 			pinctrl-1 = <&spi6_sleep>;
-- 
2.32.0

[PATCH v2 3/4] arm64: dts: qcom: qcs404: align clocks in SPI with DT schema

[Krzysztof Kozlowski]

The DT schema expects clocks core-iface order.  No functional change.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 36 ++++++++++++++--------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 3f06f7cd3cf2..4af5065e830b 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -928,9 +928,9 @@ blsp1_spi0: spi@78b5000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			reg = <0x078b5000 0x600>;
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				 <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>;
-			clock-names = "iface", "core";
+			clocks = <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
 			pinctrl-names = "default";
 			pinctrl-0 = <&blsp1_spi0_default>;
 			#address-cells = <1>;
@@ -956,9 +956,9 @@ blsp1_spi1: spi@78b6000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			reg = <0x078b6000 0x600>;
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				 <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>;
-			clock-names = "iface", "core";
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
 			pinctrl-names = "default";
 			pinctrl-0 = <&blsp1_spi1_default>;
 			#address-cells = <1>;
@@ -984,9 +984,9 @@ blsp1_spi2: spi@78b7000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			reg = <0x078b7000 0x600>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				 <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>;
-			clock-names = "iface", "core";
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
 			pinctrl-names = "default";
 			pinctrl-0 = <&blsp1_spi2_default>;
 			#address-cells = <1>;
@@ -1012,9 +1012,9 @@ blsp1_spi3: spi@78b8000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			reg = <0x078b8000 0x600>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				 <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>;
-			clock-names = "iface", "core";
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
 			pinctrl-names = "default";
 			pinctrl-0 = <&blsp1_spi3_default>;
 			#address-cells = <1>;
@@ -1040,9 +1040,9 @@ blsp1_spi4: spi@78b9000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			reg = <0x078b9000 0x600>;
 			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				 <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>;
-			clock-names = "iface", "core";
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
 			pinctrl-names = "default";
 			pinctrl-0 = <&blsp1_spi4_default>;
 			#address-cells = <1>;
@@ -1092,9 +1092,9 @@ blsp2_spi0: spi@7af5000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			reg = <0x07af5000 0x600>;
 			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
-				 <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>;
-			clock-names = "iface", "core";
+			clocks = <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
 			pinctrl-names = "default";
 			pinctrl-0 = <&blsp2_spi0_default>;
 			#address-cells = <1>;
-- 
2.32.0

[PATCH v2 4/4] spi: dt-bindings: qcom,spi-qup: convert to dtschema

[Krzysztof Kozlowski]

Convert the Qualcomm Universal Peripheral (QUP) Serial Peripheral
Interface (SPI) bindings to DT Schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/soc/qcom/qcom,gsbi.txt           |   2 +-
 .../devicetree/bindings/spi/qcom,spi-qup.txt  | 103 ------------------
 .../devicetree/bindings/spi/qcom,spi-qup.yaml |  81 ++++++++++++++
 3 files changed, 82 insertions(+), 104 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
 create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
index fe1855f09dcc..c443f1416a0a 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
@@ -33,7 +33,7 @@ controller, or some combination of aforementioned devices.
 
 See the following for child node definitions:
 Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
-Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
+Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml
 Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
 
 Example for APQ8064:
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
deleted file mode 100644
index 5c090771c016..000000000000
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
+++ /dev/null
@@ -1,103 +0,0 @@
-Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
-
-The QUP core is an AHB slave that provides a common data path (an output FIFO
-and an input FIFO) for serial peripheral interface (SPI) mini-core.
-
-SPI in master mode supports up to 50MHz, up to four chip selects, programmable
-data path from 4 bits to 32 bits and numerous protocol variants.
-
-Required properties:
-- compatible:     Should contain:
-		  "qcom,spi-qup-v1.1.1" for 8660, 8960 and 8064.
-		  "qcom,spi-qup-v2.1.1" for 8974 and later
-		  "qcom,spi-qup-v2.2.1" for 8974 v2 and later.
-
-- reg:            Should contain base register location and length
-- interrupts:     Interrupt number used by this controller
-
-- clocks:         Should contain the core clock and the AHB clock.
-- clock-names:    Should be "core" for the core clock and "iface" for the
-                  AHB clock.
-
-- #address-cells: Number of cells required to define a chip select
-                  address on the SPI bus. Should be set to 1.
-- #size-cells:    Should be zero.
-
-Optional properties:
-- spi-max-frequency: Specifies maximum SPI clock frequency,
-                     Units - Hz. Definition as per
-                     Documentation/devicetree/bindings/spi/spi-bus.txt
-- num-cs:	total number of chipselects
-- cs-gpios:	should specify GPIOs used for chipselects.
-		The gpios will be referred to as reg = <index> in the SPI child
-		nodes.  If unspecified, a single SPI device without a chip
-		select can be used.
-
-- dmas:         Two DMA channel specifiers following the convention outlined
-                in bindings/dma/dma.txt
-- dma-names:    Names for the dma channels, if present. There must be at
-                least one channel named "tx" for transmit and named "rx" for
-                receive.
-
-SPI slave nodes must be children of the SPI master node and can contain
-properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-
-	spi_8: spi@f9964000 { /* BLSP2 QUP2 */
-
-		compatible = "qcom,spi-qup-v2";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0xf9964000 0x1000>;
-		interrupts = <0 102 0>;
-		spi-max-frequency = <19200000>;
-
-		clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-		clock-names = "core", "iface";
-
-		dmas = <&blsp1_bam 13>, <&blsp1_bam 12>;
-		dma-names = "rx", "tx";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi8_default>;
-
-		device@0 {
-			compatible = "arm,pl022-dummy";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0>; /* Chip select 0 */
-			spi-max-frequency = <19200000>;
-			spi-cpol;
-		};
-
-		device@1 {
-			compatible = "arm,pl022-dummy";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <1>; /* Chip select 1 */
-			spi-max-frequency = <9600000>;
-			spi-cpha;
-		};
-
-		device@2 {
-			compatible = "arm,pl022-dummy";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <2>; /* Chip select 2 */
-			spi-max-frequency = <19200000>;
-			spi-cpol;
-			spi-cpha;
-		};
-
-		device@3 {
-			compatible = "arm,pl022-dummy";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <3>; /* Chip select 3 */
-			spi-max-frequency = <19200000>;
-			spi-cpol;
-			spi-cpha;
-			spi-cs-high;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml
new file mode 100644
index 000000000000..93f14dd01afc
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/qcom,spi-qup.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The QUP core is an AHB slave that provides a common data path (an output FIFO
+  and an input FIFO) for serial peripheral interface (SPI) mini-core.
+
+  SPI in master mode supports up to 50MHz, up to four chip selects,
+  programmable data path from 4 bits to 32 bits and numerous protocol variants.
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,spi-qup-v1.1.1 # for 8660, 8960 and 8064
+      - qcom,spi-qup-v2.1.1 # for 8974 and later
+      - qcom,spi-qup-v2.2.1 # for 8974 v2 and later
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spi@7575000 {
+        compatible = "qcom,spi-qup-v2.2.1";
+        reg = <0x07575000 0x600>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+                 <&gcc GCC_BLSP1_AHB_CLK>;
+        clock-names = "core", "iface";
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&blsp1_spi1_default>;
+        pinctrl-1 = <&blsp1_spi1_sleep>;
+        dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+        dma-names = "tx", "rx";
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
-- 
2.32.0

Re: [PATCH v2 0/4] spi: dt-bindings: qcom: convert qcom,spi-qup to DT schema

[Krzysztof Kozlowski]

On 31/03/2022 17:53, Krzysztof Kozlowski wrote:
> Hi,
> 
> Changes since v1
> ================
> 1. Fix path in com/qcom,gsbi.txt.
> 2. Merge clock-names in example, correct $ref path (Kuldeep).
> 
> Merging
> =======
> The DTS patches are independent and silence warnings pointed
> out by schema.
> 
> Best regards,
> Krzysztof
> 
> Cc: Kuldeep Singh <singh.kuldeep87k@gmail.com>
> 

I forgot to add the ack from Kuldeep:

Acked-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>


Best regards,
Krzysztof

Re: [PATCH v2 4/4] spi: dt-bindings: qcom,spi-qup: convert to dtschema

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 245 bytes --]

On Thu, Mar 31, 2022 at 05:54:25PM +0200, Krzysztof Kozlowski wrote:
> Convert the Qualcomm Universal Peripheral (QUP) Serial Peripheral
> Interface (SPI) bindings to DT Schema.

This doesn't apply against current code, please check and resend.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v2 4/4] spi: dt-bindings: qcom,spi-qup: convert to dtschema

[Krzysztof Kozlowski]

On 04/04/2022 09:54, Mark Brown wrote:
> On Thu, Mar 31, 2022 at 05:54:25PM +0200, Krzysztof Kozlowski wrote:
>> Convert the Qualcomm Universal Peripheral (QUP) Serial Peripheral
>> Interface (SPI) bindings to DT Schema.
> 
> This doesn't apply against current code, please check and resend.

The v2 was superseded with:
https://lore.kernel.org/linux-devicetree/20220402184011.132465-1-krzysztof.kozlowski@linaro.org/

The v3 needs a fix (in different place, not v3), so I will send a v4.

The SPI patch is now dependency for final schema conversion, so I think
would be better if you ack/review it.


Best regards,
Krzysztof