[PATCH 5.10.y-cip 00/29] Add RSPI/OSTM/WDT/TSU/OPP support to Renesas RZ/G2L SoC

[PATCH 5.10.y-cip 00/29] Add RSPI/OSTM/WDT/TSU/OPP support to Renesas RZ/G2L SoC

[Lad Prabhakar]

Hi All,

This patch series adds support for following to Renesas RZ/RGL SoC:
* RSPI
* WDT
* OSTM
* TSU/OPP/IPA

All the patches have been cherry-picked from v5.17 release.

Cheers,
Prabhakar

Andy Shevchenko (1):
  units: Add SI metric prefix definitions

Biju Das (22):
  clk: renesas: r9a07g044: Add WDT clock and reset entries
  clk: renesas: r9a07g044: Rename CLK_PLL2_DIV16 and CLK_PLL2_DIV20
    macros
  dt-bindings: watchdog: renesas,wdt: Add support for RZ/G2L
  watchdog: Add Watchdog Timer driver for RZ/G2L
  clk: renesas: r9a07g044: Add OSTM clock and reset entries
  dt-bindings: timer: renesas: ostm: Document Renesas RZ/G2L OSTM
  reset: Add of_reset_control_get_optional_exclusive()
  clocksource/drivers/renesas-ostm: Add RZ/G2L OSTM support
  clocksource/drivers/renesas,ostm: Make RENESAS_OSTM symbol visible
  arm64: dts: renesas: r9a07g044: Add OSTM nodes
  arm64: dts: renesas: rzg2l-smarc-som: Enable OSTM
  arm64: dts: renesas: r9a07g044: Add WDT nodes
  arm64: dts: renesas: rzg2l-smarc-som: Enable watchdog
  clk: renesas: r9a07g044: Change core clock "I" from DEF_FIXED->DEF_DIV
  clk: renesas: r9a07g044: Add TSU clock and reset entry
  clk: renesas: r9a07g044: Rename CLK_PLL3_DIV4 macro
  clk: renesas: rzg2l: Add CPG_PL1_DDIV macro
  dt-bindings: thermal: Document Renesas RZ/G2L TSU
  thermal/drivers: Add TSU driver for RZ/G2L
  arm64: dts: renesas: r9a07g044: Add OPP table
  arm64: dts: renesas: r9a07g044: Add TSU node
  arm64: dts: renesas: r9a07g044: Create thermal zone to support IPA

Lad Prabhakar (6):
  clk: renesas: r9a07g044: Add RSPI clock and reset entries
  spi: dt-bindings: renesas,rspi: Document RZ/G2L SoC
  spi: spi-rspi: Add support to deassert/assert reset line
  spi: spi-rspi: Drop redeclaring ret variable in qspi_transfer_in()
  arm64: dts: renesas: r9a07g044: Add RSPI{0,1,2} nodes
  arm64: dts: renesas: rzg2l-smarc: Enable RSPI1 on carrier board

 .../devicetree/bindings/spi/renesas,rspi.yaml |   4 +-
 .../bindings/thermal/rzg2l-thermal.yaml       |  76 +++++
 .../bindings/timer/renesas,ostm.yaml          |  20 +-
 .../bindings/watchdog/renesas,wdt.yaml        |  75 +++--
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi    | 199 +++++++++++++
 .../boot/dts/renesas/rzg2l-smarc-som.dtsi     |  23 ++
 arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi  |  14 +
 drivers/clk/renesas/r9a07g044-cpg.c           |  63 ++++-
 drivers/clk/renesas/rzg2l-cpg.h               |   2 +
 drivers/clocksource/Kconfig                   |   3 +-
 drivers/clocksource/renesas-ostm.c            |  39 ++-
 drivers/spi/spi-rspi.c                        |  27 +-
 drivers/thermal/Kconfig                       |   9 +
 drivers/thermal/Makefile                      |   1 +
 drivers/thermal/rzg2l_thermal.c               | 239 ++++++++++++++++
 drivers/watchdog/Kconfig                      |   8 +
 drivers/watchdog/Makefile                     |   1 +
 drivers/watchdog/rzg2l_wdt.c                  | 263 ++++++++++++++++++
 include/linux/reset.h                         |  20 ++
 include/linux/units.h                         |  16 ++
 20 files changed, 1068 insertions(+), 34 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
 create mode 100644 drivers/thermal/rzg2l_thermal.c
 create mode 100644 drivers/watchdog/rzg2l_wdt.c


base-commit: 05648080e85d797e727b8935406c2057c8a76637
-- 
2.17.1

[PATCH 5.10.y-cip 01/29] clk: renesas: r9a07g044: Add RSPI clock and reset entries

[Lad Prabhakar]

commit e7d960cd6afd56d8c6d4408b6b8a59c91baafcc2 upstream.

Add RSPI{0,1,2} clock and reset entries to CPG driver.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20211117002601.17971-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/clk/renesas/r9a07g044-cpg.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/clk/renesas/r9a07g044-cpg.c b/drivers/clk/renesas/r9a07g044-cpg.c
index 463b658a0c54..c39d60197d95 100644
--- a/drivers/clk/renesas/r9a07g044-cpg.c
+++ b/drivers/clk/renesas/r9a07g044-cpg.c
@@ -219,6 +219,12 @@ static struct rzg2l_mod_clk r9a07g044_mod_clks[] = {
 				0x588, 0),
 	DEF_MOD("sci1",		R9A07G044_SCI1_CLKP, R9A07G044_CLK_P0,
 				0x588, 1),
+	DEF_MOD("rspi0",	R9A07G044_RSPI0_CLKB, R9A07G044_CLK_P0,
+				0x590, 0),
+	DEF_MOD("rspi1",	R9A07G044_RSPI1_CLKB, R9A07G044_CLK_P0,
+				0x590, 1),
+	DEF_MOD("rspi2",	R9A07G044_RSPI2_CLKB, R9A07G044_CLK_P0,
+				0x590, 2),
 	DEF_MOD("canfd",	R9A07G044_CANFD_PCLK, R9A07G044_CLK_P0,
 				0x594, 0),
 	DEF_MOD("gpio",		R9A07G044_GPIO_HCLK, R9A07G044_OSCCLK,
@@ -259,6 +265,9 @@ static struct rzg2l_reset r9a07g044_resets[] = {
 	DEF_RST(R9A07G044_SCIF4_RST_SYSTEM_N, 0x884, 4),
 	DEF_RST(R9A07G044_SCI0_RST, 0x888, 0),
 	DEF_RST(R9A07G044_SCI1_RST, 0x888, 1),
+	DEF_RST(R9A07G044_RSPI0_RST, 0x890, 0),
+	DEF_RST(R9A07G044_RSPI1_RST, 0x890, 1),
+	DEF_RST(R9A07G044_RSPI2_RST, 0x890, 2),
 	DEF_RST(R9A07G044_CANFD_RSTP_N, 0x894, 0),
 	DEF_RST(R9A07G044_CANFD_RSTC_N, 0x894, 1),
 	DEF_RST(R9A07G044_GPIO_RSTN, 0x898, 0),
-- 
2.17.1

[PATCH 5.10.y-cip 02/29] spi: dt-bindings: renesas,rspi: Document RZ/G2L SoC

[Lad Prabhakar]

commit 5a8f8542e34b6469cd5c5a3d075fa5977d90775e upstream.

Add RSPI binding documentation for Renesas RZ/G2L SoC.

RSPI block is identical to one found on RZ/A, so no driver changes are
required. The fallback compatible string "renesas,rspi-rz" will be used
on RZ/G2L.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211118031041.2312-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 Documentation/devicetree/bindings/spi/renesas,rspi.yaml | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
index 10e83cb17e8d..6940ad78377c 100644
--- a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
+++ b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
@@ -21,7 +21,8 @@ properties:
           - enum:
               - renesas,rspi-r7s72100  # RZ/A1H
               - renesas,rspi-r7s9210   # RZ/A2
-          - const: renesas,rspi-rz     # RZ/A
+              - renesas,r9a07g044-rspi # RZ/G2{L,LC}
+          - const: renesas,rspi-rz     # RZ/A and RZ/G2{L,LC}
 
       - items:
           - enum:
@@ -120,6 +121,7 @@ allOf:
           contains:
             enum:
               - renesas,qspi
+              - renesas,r9a07g044-rspi
     then:
       required:
         - resets
-- 
2.17.1

[PATCH 5.10.y-cip 03/29] spi: spi-rspi: Add support to deassert/assert reset line

[Lad Prabhakar]

commit aadbff4af5c90919cbe67e2c4d77c68cdefa454e upstream.

On RZ/G2L SoC we need to explicitly deassert the reset line
for the device to work, use this opportunity to deassert/assert
reset line in spi-rspi driver.

This patch adds support to read the "resets" property (if available)
from DT and perform deassert/assert when required.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211118031041.2312-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/spi/spi-rspi.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index e39fd38f5180..fc491091b3d1 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -21,6 +21,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/of_device.h>
 #include <linux/pm_runtime.h>
+#include <linux/reset.h>
 #include <linux/sh_dma.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/rspi.h>
@@ -1225,8 +1226,14 @@ static const struct of_device_id rspi_of_match[] = {
 
 MODULE_DEVICE_TABLE(of, rspi_of_match);
 
+static void rspi_reset_control_assert(void *data)
+{
+	reset_control_assert(data);
+}
+
 static int rspi_parse_dt(struct device *dev, struct spi_controller *ctlr)
 {
+	struct reset_control *rstc;
 	u32 num_cs;
 	int error;
 
@@ -1238,6 +1245,24 @@ static int rspi_parse_dt(struct device *dev, struct spi_controller *ctlr)
 	}
 
 	ctlr->num_chipselect = num_cs;
+
+	rstc = devm_reset_control_get_optional_exclusive(dev, NULL);
+	if (IS_ERR(rstc))
+		return dev_err_probe(dev, PTR_ERR(rstc),
+					     "failed to get reset ctrl\n");
+
+	error = reset_control_deassert(rstc);
+	if (error) {
+		dev_err(dev, "failed to deassert reset %d\n", error);
+		return error;
+	}
+
+	error = devm_add_action_or_reset(dev, rspi_reset_control_assert, rstc);
+	if (error) {
+		dev_err(dev, "failed to register assert devm action, %d\n", error);
+		return error;
+	}
+
 	return 0;
 }
 #else
-- 
2.17.1

[PATCH 5.10.y-cip 04/29] spi: spi-rspi: Drop redeclaring ret variable in qspi_transfer_in()

[Lad Prabhakar]

commit 1d734f592e1a1d41af80e90001d109cec1c98fb4 upstream.

"ret" variable is already declared in qspi_transfer_in() at the
beginning of function, drop redeclaring ret in the if block, fixing
below:

spi-rspi.c: In function ‘qspi_transfer_in’:
spi-rspi.c:838:7: warning: declaration of ‘ret’ shadows a previous local
  838 |   int ret = rspi_dma_transfer(rspi, NULL, &xfer->rx_sg);
      |       ^~~
spi-rspi.c:835:6: note: shadowed declaration is here
  835 |  int ret;

Fixes: db30083813b55 ("spi: rspi: avoid uninitialized variable access")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211118031041.2312-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/spi/spi-rspi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index fc491091b3d1..4095f5be9e1f 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -835,7 +835,7 @@ static int qspi_transfer_in(struct rspi_data *rspi, struct spi_transfer *xfer)
 	int ret;
 
 	if (rspi->ctlr->can_dma && __rspi_can_dma(rspi, xfer)) {
-		int ret = rspi_dma_transfer(rspi, NULL, &xfer->rx_sg);
+		ret = rspi_dma_transfer(rspi, NULL, &xfer->rx_sg);
 		if (ret != -EAGAIN)
 			return ret;
 	}
-- 
2.17.1

[PATCH 5.10.y-cip 05/29] arm64: dts: renesas: r9a07g044: Add RSPI{0,1,2} nodes

[Lad Prabhakar]

commit a5c29f61466995d0d2c1370c709ef7fda534d386 upstream.

Add RSPI{0,1,2} nodes to R9A07G044 (RZ/G2L) SoC DTSI.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20211117011247.27621-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[PL: Manually applied the changes]
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 48 ++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 468a3d8cbd1f..741621dcbbf7 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -78,6 +78,54 @@
 		#size-cells = <2>;
 		ranges;
 
+		spi0: spi@1004ac00 {
+			compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004ac00 0 0x400>;
+			interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G044_RSPI0_CLKB>;
+			resets = <&cpg R9A07G044_RSPI0_RST>;
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@1004b000 {
+			compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004b000 0 0x400>;
+			interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G044_RSPI1_CLKB>;
+			resets = <&cpg R9A07G044_RSPI1_RST>;
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@1004b400 {
+			compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004b400 0 0x400>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G044_RSPI2_CLKB>;
+			resets = <&cpg R9A07G044_RSPI2_RST>;
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		scif0: serial@1004b800 {
 			compatible = "renesas,scif-r9a07g044";
 			reg = <0 0x1004b800 0 0x400>;
-- 
2.17.1

[PATCH 5.10.y-cip 06/29] arm64: dts: renesas: rzg2l-smarc: Enable RSPI1 on carrier board

[Lad Prabhakar]

commit 7dd4fdec402e196f7a5bf519ea1bdb14b358cfa2 upstream.

RSPI1 (SPI1) interface is available on PMOD0 connector (J1) on the
carrier board.  This patch adds pinmux and spi1 nodes to the carrier
board dtsi file.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20211117011247.27621-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[PL: Manually applied the changes]
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
index 0cd7da8af1d4..994fc0dc1516 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
@@ -198,6 +198,13 @@
 		};
 	};
 
+	spi1_pins: spi1 {
+		pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */
+			 <RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */
+			 <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */
+			 <RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */
+	};
+
 	usb0_pins: usb0 {
 		pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */
 			 <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */
@@ -246,6 +253,13 @@
 	status = "okay";
 };
 
+&spi1 {
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
 &usb2_phy0 {
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";
-- 
2.17.1

[PATCH 5.10.y-cip 07/29] clk: renesas: r9a07g044: Add WDT clock and reset entries

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit 073da9e7c768b0d81f9ce22cc907227450612d88 upstream.

Add WDT{0,1,2} clock and reset entries to CPG driver.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20211104160858.15550-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/clk/renesas/r9a07g044-cpg.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/clk/renesas/r9a07g044-cpg.c b/drivers/clk/renesas/r9a07g044-cpg.c
index c39d60197d95..a09ce7abb36a 100644
--- a/drivers/clk/renesas/r9a07g044-cpg.c
+++ b/drivers/clk/renesas/r9a07g044-cpg.c
@@ -145,6 +145,18 @@ static struct rzg2l_mod_clk r9a07g044_mod_clks[] = {
 				0x52c, 0),
 	DEF_MOD("dmac_pclk",	R9A07G044_DMAC_PCLK, CLK_P1_DIV2,
 				0x52c, 1),
+	DEF_MOD("wdt0_pclk",	R9A07G044_WDT0_PCLK, R9A07G044_CLK_P0,
+				0x548, 0),
+	DEF_MOD("wdt0_clk",	R9A07G044_WDT0_CLK, R9A07G044_OSCCLK,
+				0x548, 1),
+	DEF_MOD("wdt1_pclk",	R9A07G044_WDT1_PCLK, R9A07G044_CLK_P0,
+				0x548, 2),
+	DEF_MOD("wdt1_clk",	R9A07G044_WDT1_CLK, R9A07G044_OSCCLK,
+				0x548, 3),
+	DEF_MOD("wdt2_pclk",	R9A07G044_WDT2_PCLK, R9A07G044_CLK_P0,
+				0x548, 4),
+	DEF_MOD("wdt2_clk",	R9A07G044_WDT2_CLK, R9A07G044_OSCCLK,
+				0x548, 5),
 	DEF_MOD("spi_clk2",	R9A07G044_SPI_CLK2, R9A07G044_CLK_SPI1,
 				0x550, 0),
 	DEF_MOD("spi_clk",	R9A07G044_SPI_CLK, R9A07G044_CLK_SPI0,
@@ -241,6 +253,9 @@ static struct rzg2l_reset r9a07g044_resets[] = {
 	DEF_RST(R9A07G044_IA55_RESETN, 0x818, 0),
 	DEF_RST(R9A07G044_DMAC_ARESETN, 0x82c, 0),
 	DEF_RST(R9A07G044_DMAC_RST_ASYNC, 0x82c, 1),
+	DEF_RST(R9A07G044_WDT0_PRESETN, 0x848, 0),
+	DEF_RST(R9A07G044_WDT1_PRESETN, 0x848, 1),
+	DEF_RST(R9A07G044_WDT2_PRESETN, 0x848, 2),
 	DEF_RST(R9A07G044_SPI_RST, 0x850, 0),
 	DEF_RST(R9A07G044_SDHI0_IXRST, 0x854, 0),
 	DEF_RST(R9A07G044_SDHI1_IXRST, 0x854, 1),
-- 
2.17.1

[PATCH 5.10.y-cip 08/29] clk: renesas: r9a07g044: Rename CLK_PLL2_DIV16 and CLK_PLL2_DIV20 macros

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit dc446cba4301bbe2dbe16711091635d987626410 upstream.

Rename the macros CLK_PLL2_DIV16->CLK_PLL2_DIV2_8 and
CLK_PLL2_DIV20->CLK_PLL2_DIV2_10 to match the clock tree mentioned in
the hardware manual(Rev.1.00 Sep, 2021).

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211110082019.28554-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/clk/renesas/r9a07g044-cpg.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/renesas/r9a07g044-cpg.c b/drivers/clk/renesas/r9a07g044-cpg.c
index a09ce7abb36a..e85df2e1da2c 100644
--- a/drivers/clk/renesas/r9a07g044-cpg.c
+++ b/drivers/clk/renesas/r9a07g044-cpg.c
@@ -26,8 +26,8 @@ enum clk_ids {
 	CLK_PLL1,
 	CLK_PLL2,
 	CLK_PLL2_DIV2,
-	CLK_PLL2_DIV16,
-	CLK_PLL2_DIV20,
+	CLK_PLL2_DIV2_8,
+	CLK_PLL2_DIV2_10,
 	CLK_PLL3,
 	CLK_PLL3_400,
 	CLK_PLL3_533,
@@ -94,8 +94,8 @@ static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = {
 	DEF_FIXED(".clk_400", CLK_PLL2_SDHI_400, CLK_PLL2_800, 1, 2),
 	DEF_FIXED(".clk_266", CLK_PLL2_SDHI_266, CLK_PLL2_SDHI_533, 1, 2),
 
-	DEF_FIXED(".pll2_div16", CLK_PLL2_DIV16, CLK_PLL2, 1, 16),
-	DEF_FIXED(".pll2_div20", CLK_PLL2_DIV20, CLK_PLL2, 1, 20),
+	DEF_FIXED(".pll2_div2_8", CLK_PLL2_DIV2_8, CLK_PLL2_DIV2, 1, 8),
+	DEF_FIXED(".pll2_div2_10", CLK_PLL2_DIV2_10, CLK_PLL2_DIV2, 1, 10),
 
 	DEF_FIXED(".pll3_div2", CLK_PLL3_DIV2, CLK_PLL3, 1, 2),
 	DEF_FIXED(".pll3_div2_4", CLK_PLL3_DIV2_4, CLK_PLL3_DIV2, 1, 4),
@@ -111,10 +111,10 @@ static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = {
 
 	/* Core output clk */
 	DEF_FIXED("I", R9A07G044_CLK_I, CLK_PLL1, 1, 1),
-	DEF_DIV("P0", R9A07G044_CLK_P0, CLK_PLL2_DIV16, DIVPL2A,
+	DEF_DIV("P0", R9A07G044_CLK_P0, CLK_PLL2_DIV2_8, DIVPL2A,
 		dtable_1_32, CLK_DIVIDER_HIWORD_MASK),
 	DEF_FIXED("P0_DIV2", R9A07G044_CLK_P0_DIV2, R9A07G044_CLK_P0, 1, 2),
-	DEF_FIXED("TSU", R9A07G044_CLK_TSU, CLK_PLL2_DIV20, 1, 1),
+	DEF_FIXED("TSU", R9A07G044_CLK_TSU, CLK_PLL2_DIV2_10, 1, 1),
 	DEF_DIV("P1", R9A07G044_CLK_P1, CLK_PLL3_DIV2_4,
 		DIVPL3B, dtable_1_32, CLK_DIVIDER_HIWORD_MASK),
 	DEF_FIXED("P1_DIV2", CLK_P1_DIV2, R9A07G044_CLK_P1, 1, 2),
-- 
2.17.1

[PATCH 5.10.y-cip 09/29] dt-bindings: watchdog: renesas,wdt: Add support for RZ/G2L

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit ab02a00c9e32a5eb1525689b990ad9d345f0832e upstream.

Describe the WDT hardware in the RZ/G2L series.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211130195357.18626-2-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 .../bindings/watchdog/renesas,wdt.yaml        | 75 ++++++++++++++-----
 1 file changed, 57 insertions(+), 18 deletions(-)

diff --git a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
index 6933005b52bd..74bca0b838df 100644
--- a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
@@ -10,9 +10,6 @@ maintainers:
   - Wolfram Sang <wsa+renesas@sang-engineering.com>
   - Geert Uytterhoeven <geert+renesas@glider.be>
 
-allOf:
-  - $ref: "watchdog.yaml#"
-
 properties:
   compatible:
     oneOf:
@@ -22,6 +19,11 @@ properties:
               - renesas,r7s9210-wdt      # RZ/A2
           - const: renesas,rza-wdt       # RZ/A
 
+      - items:
+          - enum:
+              - renesas,r9a07g044-wdt    # RZ/G2{L,LC}
+          - const: renesas,rzg2l-wdt     # RZ/G2L
+
       - items:
           - enum:
               - renesas,r8a7742-wdt      # RZ/G1H
@@ -55,11 +57,13 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts:
-    maxItems: 1
+  interrupts: true
 
-  clocks:
-    maxItems: 1
+  interrupt-names: true
+
+  clocks: true
+
+  clock-names: true
 
   power-domains:
     maxItems: 1
@@ -74,17 +78,52 @@ required:
   - reg
   - clocks
 
-if:
-  not:
-    properties:
-      compatible:
-        contains:
-          enum:
-            - renesas,rza-wdt
-then:
-  required:
-    - power-domains
-    - resets
+allOf:
+  - $ref: "watchdog.yaml#"
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,rza-wdt
+    then:
+      required:
+        - power-domains
+        - resets
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rzg2l-wdt
+    then:
+      properties:
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          items:
+            - const: wdt
+            - const: perrout
+        clocks:
+          items:
+            - description: Register access clock
+            - description: Main clock
+        clock-names:
+          items:
+            - const: pclk
+            - const: oscclk
+      required:
+        - clock-names
+        - interrupt-names
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+        clocks:
+          maxItems: 1
 
 additionalProperties: false
 
-- 
2.17.1

[PATCH 5.10.y-cip 10/29] units: Add SI metric prefix definitions

[Lad Prabhakar]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

commit 26471d4a6cf8d5d0bd0fb55c7169de7d67cc703a upstream.

Sometimes it's useful to have well-defined SI metric prefix to be used
to self-describe the formulas or equations.

List most popular ones in the units.h.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
[PL: Manually applied the changes]
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 include/linux/units.h | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/include/linux/units.h b/include/linux/units.h
index aaf716364ec3..e44b9581f20a 100644
--- a/include/linux/units.h
+++ b/include/linux/units.h
@@ -4,6 +4,22 @@
 
 #include <linux/kernel.h>
 
+/* Metric prefixes in accordance with Système international (d'unités) */
+#define PETA   1000000000000000ULL
+#define TERA   1000000000000ULL
+#define GIGA   1000000000UL
+#define MEGA   1000000UL
+#define KILO   1000UL
+#define HECTO  100UL
+#define DECA   10UL
+#define DECI   10UL
+#define CENTI  100UL
+#define MILLI  1000UL
+#define MICRO  1000000UL
+#define NANO   1000000000UL
+#define PICO   1000000000000ULL
+#define FEMTO  1000000000000000ULL
+
 #define ABSOLUTE_ZERO_MILLICELSIUS -273150
 
 static inline long milli_kelvin_to_millicelsius(long t)
-- 
2.17.1

[PATCH 5.10.y-cip 11/29] watchdog: Add Watchdog Timer driver for RZ/G2L

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit 2cbc5cd0b55fa2310cc557c77b0665f5e00272de upstream.

Add Watchdog Timer driver for RZ/G2L SoC.

WDT IP block supports normal watchdog timer function and reset
request function due to CPU parity error.

This driver currently supports normal watchdog timer function
and later will add support for reset request function due to
CPU parity error.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211130195357.18626-3-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/watchdog/Kconfig     |   8 ++
 drivers/watchdog/Makefile    |   1 +
 drivers/watchdog/rzg2l_wdt.c | 263 +++++++++++++++++++++++++++++++++++
 3 files changed, 272 insertions(+)
 create mode 100644 drivers/watchdog/rzg2l_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 01ce3f41cc21..30eb41c47224 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -926,6 +926,14 @@ config RENESAS_RZAWDT
 	  This driver adds watchdog support for the integrated watchdogs in the
 	  Renesas RZ/A SoCs. These watchdogs can be used to reset a system.
 
+config RENESAS_RZG2LWDT
+	tristate "Renesas RZ/G2L WDT Watchdog"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  This driver adds watchdog support for the integrated watchdogs in the
+	  Renesas RZ/G2L SoCs. These watchdogs can be used to reset a system.
+
 config ASPEED_WATCHDOG
 	tristate "Aspeed BMC watchdog support"
 	depends on ARCH_ASPEED || COMPILE_TEST
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 071a2e50be98..4221b1170f2b 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -87,6 +87,7 @@ obj-$(CONFIG_BCM7038_WDT) += bcm7038_wdt.o
 obj-$(CONFIG_ATLAS7_WATCHDOG) += atlas7_wdt.o
 obj-$(CONFIG_RENESAS_WDT) += renesas_wdt.o
 obj-$(CONFIG_RENESAS_RZAWDT) += rza_wdt.o
+obj-$(CONFIG_RENESAS_RZG2LWDT) += rzg2l_wdt.o
 obj-$(CONFIG_ASPEED_WATCHDOG) += aspeed_wdt.o
 obj-$(CONFIG_ZX2967_WATCHDOG) += zx2967_wdt.o
 obj-$(CONFIG_STM32_WATCHDOG) += stm32_iwdg.o
diff --git a/drivers/watchdog/rzg2l_wdt.c b/drivers/watchdog/rzg2l_wdt.c
new file mode 100644
index 000000000000..6b426df34fd6
--- /dev/null
+++ b/drivers/watchdog/rzg2l_wdt.c
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G2L WDT Watchdog Driver
+ *
+ * Copyright (C) 2021 Renesas Electronics Corporation
+ */
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/units.h>
+#include <linux/watchdog.h>
+
+#define WDTCNT		0x00
+#define WDTSET		0x04
+#define WDTTIM		0x08
+#define WDTINT		0x0C
+#define WDTCNT_WDTEN	BIT(0)
+#define WDTINT_INTDISP	BIT(0)
+
+#define WDT_DEFAULT_TIMEOUT		60U
+
+/* Setting period time register only 12 bit set in WDTSET[31:20] */
+#define WDTSET_COUNTER_MASK		(0xFFF00000)
+#define WDTSET_COUNTER_VAL(f)		((f) << 20)
+
+#define F2CYCLE_NSEC(f)			(1000000000 / (f))
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct rzg2l_wdt_priv {
+	void __iomem *base;
+	struct watchdog_device wdev;
+	struct reset_control *rstc;
+	unsigned long osc_clk_rate;
+	unsigned long delay;
+};
+
+static void rzg2l_wdt_wait_delay(struct rzg2l_wdt_priv *priv)
+{
+	/* delay timer when change the setting register */
+	ndelay(priv->delay);
+}
+
+static u32 rzg2l_wdt_get_cycle_usec(unsigned long cycle, u32 wdttime)
+{
+	u64 timer_cycle_us = 1024 * 1024 * (wdttime + 1) * MICRO;
+
+	return div64_ul(timer_cycle_us, cycle);
+}
+
+static void rzg2l_wdt_write(struct rzg2l_wdt_priv *priv, u32 val, unsigned int reg)
+{
+	if (reg == WDTSET)
+		val &= WDTSET_COUNTER_MASK;
+
+	writel_relaxed(val, priv->base + reg);
+	/* Registers other than the WDTINT is always synchronized with WDT_CLK */
+	if (reg != WDTINT)
+		rzg2l_wdt_wait_delay(priv);
+}
+
+static void rzg2l_wdt_init_timeout(struct watchdog_device *wdev)
+{
+	struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
+	u32 time_out;
+
+	/* Clear Lapsed Time Register and clear Interrupt */
+	rzg2l_wdt_write(priv, WDTINT_INTDISP, WDTINT);
+	/* 2 consecutive overflow cycle needed to trigger reset */
+	time_out = (wdev->timeout * (MICRO / 2)) /
+		   rzg2l_wdt_get_cycle_usec(priv->osc_clk_rate, 0);
+	rzg2l_wdt_write(priv, WDTSET_COUNTER_VAL(time_out), WDTSET);
+}
+
+static int rzg2l_wdt_start(struct watchdog_device *wdev)
+{
+	struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
+
+	reset_control_deassert(priv->rstc);
+	pm_runtime_get_sync(wdev->parent);
+
+	/* Initialize time out */
+	rzg2l_wdt_init_timeout(wdev);
+
+	/* Initialize watchdog counter register */
+	rzg2l_wdt_write(priv, 0, WDTTIM);
+
+	/* Enable watchdog timer*/
+	rzg2l_wdt_write(priv, WDTCNT_WDTEN, WDTCNT);
+
+	return 0;
+}
+
+static int rzg2l_wdt_stop(struct watchdog_device *wdev)
+{
+	struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
+
+	pm_runtime_put(wdev->parent);
+	reset_control_assert(priv->rstc);
+
+	return 0;
+}
+
+static int rzg2l_wdt_restart(struct watchdog_device *wdev,
+			     unsigned long action, void *data)
+{
+	struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
+
+	/* Reset the module before we modify any register */
+	reset_control_reset(priv->rstc);
+	pm_runtime_get_sync(wdev->parent);
+
+	/* smallest counter value to reboot soon */
+	rzg2l_wdt_write(priv, WDTSET_COUNTER_VAL(1), WDTSET);
+
+	/* Enable watchdog timer*/
+	rzg2l_wdt_write(priv, WDTCNT_WDTEN, WDTCNT);
+
+	return 0;
+}
+
+static const struct watchdog_info rzg2l_wdt_ident = {
+	.options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
+	.identity = "Renesas RZ/G2L WDT Watchdog",
+};
+
+static int rzg2l_wdt_ping(struct watchdog_device *wdev)
+{
+	struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
+
+	rzg2l_wdt_write(priv, WDTINT_INTDISP, WDTINT);
+
+	return 0;
+}
+
+static const struct watchdog_ops rzg2l_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = rzg2l_wdt_start,
+	.stop = rzg2l_wdt_stop,
+	.ping = rzg2l_wdt_ping,
+	.restart = rzg2l_wdt_restart,
+};
+
+static void rzg2l_wdt_reset_assert_pm_disable_put(void *data)
+{
+	struct watchdog_device *wdev = data;
+	struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
+
+	pm_runtime_put(wdev->parent);
+	pm_runtime_disable(wdev->parent);
+	reset_control_assert(priv->rstc);
+}
+
+static int rzg2l_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rzg2l_wdt_priv *priv;
+	unsigned long pclk_rate;
+	struct clk *wdt_clk;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	/* Get watchdog main clock */
+	wdt_clk = clk_get(&pdev->dev, "oscclk");
+	if (IS_ERR(wdt_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(wdt_clk), "no oscclk");
+
+	priv->osc_clk_rate = clk_get_rate(wdt_clk);
+	clk_put(wdt_clk);
+	if (!priv->osc_clk_rate)
+		return dev_err_probe(&pdev->dev, -EINVAL, "oscclk rate is 0");
+
+	/* Get Peripheral clock */
+	wdt_clk = clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(wdt_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(wdt_clk), "no pclk");
+
+	pclk_rate = clk_get_rate(wdt_clk);
+	clk_put(wdt_clk);
+	if (!pclk_rate)
+		return dev_err_probe(&pdev->dev, -EINVAL, "pclk rate is 0");
+
+	priv->delay = F2CYCLE_NSEC(priv->osc_clk_rate) * 6 + F2CYCLE_NSEC(pclk_rate) * 9;
+
+	priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(priv->rstc))
+		return dev_err_probe(&pdev->dev, PTR_ERR(priv->rstc),
+				     "failed to get cpg reset");
+
+	reset_control_deassert(priv->rstc);
+	pm_runtime_enable(&pdev->dev);
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret < 0) {
+		dev_err(dev, "pm_runtime_resume_and_get failed ret=%pe", ERR_PTR(ret));
+		goto out_pm_get;
+	}
+
+	priv->wdev.info = &rzg2l_wdt_ident;
+	priv->wdev.ops = &rzg2l_wdt_ops;
+	priv->wdev.parent = dev;
+	priv->wdev.min_timeout = 1;
+	priv->wdev.max_timeout = rzg2l_wdt_get_cycle_usec(priv->osc_clk_rate, 0xfff) /
+				 USEC_PER_SEC;
+	priv->wdev.timeout = WDT_DEFAULT_TIMEOUT;
+
+	watchdog_set_drvdata(&priv->wdev, priv);
+	ret = devm_add_action_or_reset(&pdev->dev,
+				       rzg2l_wdt_reset_assert_pm_disable_put,
+				       &priv->wdev);
+	if (ret < 0)
+		return ret;
+
+	watchdog_set_nowayout(&priv->wdev, nowayout);
+	watchdog_stop_on_unregister(&priv->wdev);
+
+	ret = watchdog_init_timeout(&priv->wdev, 0, dev);
+	if (ret)
+		dev_warn(dev, "Specified timeout invalid, using default");
+
+	return devm_watchdog_register_device(&pdev->dev, &priv->wdev);
+
+out_pm_get:
+	pm_runtime_disable(dev);
+	reset_control_assert(priv->rstc);
+
+	return ret;
+}
+
+static const struct of_device_id rzg2l_wdt_ids[] = {
+	{ .compatible = "renesas,rzg2l-wdt", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rzg2l_wdt_ids);
+
+static struct platform_driver rzg2l_wdt_driver = {
+	.driver = {
+		.name = "rzg2l_wdt",
+		.of_match_table = rzg2l_wdt_ids,
+	},
+	.probe = rzg2l_wdt_probe,
+};
+module_platform_driver(rzg2l_wdt_driver);
+
+MODULE_DESCRIPTION("Renesas RZ/G2L WDT Watchdog Driver");
+MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1

Re: [PATCH 5.10.y-cip 11/29] watchdog: Add Watchdog Timer driver for RZ/G2L

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1559 bytes --]

Hi!

> From: Biju Das <biju.das.jz@bp.renesas.com>
> 
> commit 2cbc5cd0b55fa2310cc557c77b0665f5e00272de upstream.
> 
> Add Watchdog Timer driver for RZ/G2L SoC.
> 
> WDT IP block supports normal watchdog timer function and reset
> request function due to CPU parity error.
> 
> This driver currently supports normal watchdog timer function
> and later will add support for reset request function due to
> CPU parity error.

> +static int rzg2l_wdt_start(struct watchdog_device *wdev)
> +{
> +	struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
> +
> +	reset_control_deassert(priv->rstc);
> +	pm_runtime_get_sync(wdev->parent);
> +
> +	/* Initialize time out */
> +	rzg2l_wdt_init_timeout(wdev);
> +
> +	/* Initialize watchdog counter register */
> +	rzg2l_wdt_write(priv, 0, WDTTIM);
> +
> +	/* Enable watchdog timer*/

I'd put space before */.

> +	ret = pm_runtime_resume_and_get(&pdev->dev);
> +	if (ret < 0) {
> +		dev_err(dev, "pm_runtime_resume_and_get failed ret=%pe", ERR_PTR(ret));
> +		goto out_pm_get;
> +	}
...
> +	watchdog_set_drvdata(&priv->wdev, priv);
> +	ret = devm_add_action_or_reset(&pdev->dev,
> +				       rzg2l_wdt_reset_assert_pm_disable_put,
> +				       &priv->wdev);
> +	if (ret < 0)
> +		return ret;

I believe you need to undo effects of pm_runtime_resume_and_get() here
and jump to out_pm_get.

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

RE: [PATCH 5.10.y-cip 11/29] watchdog: Add Watchdog Timer driver for RZ/G2L

[Prabhakar Mahadev Lad]

Hi Pavel,

Thank you for the review.

> -----Original Message-----
> From: Pavel Machek <pavel@denx.de>
> Sent: 05 April 2022 20:00
> To: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Cc: cip-dev@lists.cip-project.org; Nobuhiro Iwamatsu
> <nobuhiro1.iwamatsu@toshiba.co.jp>; Pavel Machek <pavel@denx.de>; Biju Das
> <biju.das.jz@bp.renesas.com>
> Subject: Re: [PATCH 5.10.y-cip 11/29] watchdog: Add Watchdog Timer driver
> for RZ/G2L
> 
> Hi!
> 
> > From: Biju Das <biju.das.jz@bp.renesas.com>
> >
> > commit 2cbc5cd0b55fa2310cc557c77b0665f5e00272de upstream.
> >
> > Add Watchdog Timer driver for RZ/G2L SoC.
> >
> > WDT IP block supports normal watchdog timer function and reset request
> > function due to CPU parity error.
> >
> > This driver currently supports normal watchdog timer function and
> > later will add support for reset request function due to CPU parity
> > error.
> 
> > +static int rzg2l_wdt_start(struct watchdog_device *wdev) {
> > +	struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
> > +
> > +	reset_control_deassert(priv->rstc);
> > +	pm_runtime_get_sync(wdev->parent);
> > +
> > +	/* Initialize time out */
> > +	rzg2l_wdt_init_timeout(wdev);
> > +
> > +	/* Initialize watchdog counter register */
> > +	rzg2l_wdt_write(priv, 0, WDTTIM);
> > +
> > +	/* Enable watchdog timer*/
> 
> I'd put space before */.
> 
Agreed.

> > +	ret = pm_runtime_resume_and_get(&pdev->dev);
> > +	if (ret < 0) {
> > +		dev_err(dev, "pm_runtime_resume_and_get failed ret=%pe",
> ERR_PTR(ret));
> > +		goto out_pm_get;
> > +	}
> ...
> > +	watchdog_set_drvdata(&priv->wdev, priv);
> > +	ret = devm_add_action_or_reset(&pdev->dev,
> > +				       rzg2l_wdt_reset_assert_pm_disable_put,
> > +				       &priv->wdev);
> > +	if (ret < 0)
> > +		return ret;
> 
> I believe you need to undo effects of pm_runtime_resume_and_get() here and
> jump to out_pm_get.
> 
Right, for upstream the patch has been already sent out once its part of -rc release I will backport it to CIP.

Cheers,
Prabhakar

> Best regards,
> 								Pavel
> --
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[PATCH 5.10.y-cip 12/29] clk: renesas: r9a07g044: Add OSTM clock and reset entries

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit 161450134ae9bab3778c5f5732941162626d0eaa upstream.

Add OSTM{0,1,2} clock and reset entries to CPG driver.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211110082019.28554-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/clk/renesas/r9a07g044-cpg.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/clk/renesas/r9a07g044-cpg.c b/drivers/clk/renesas/r9a07g044-cpg.c
index e85df2e1da2c..58746e655b64 100644
--- a/drivers/clk/renesas/r9a07g044-cpg.c
+++ b/drivers/clk/renesas/r9a07g044-cpg.c
@@ -145,6 +145,12 @@ static struct rzg2l_mod_clk r9a07g044_mod_clks[] = {
 				0x52c, 0),
 	DEF_MOD("dmac_pclk",	R9A07G044_DMAC_PCLK, CLK_P1_DIV2,
 				0x52c, 1),
+	DEF_MOD("ostm0_pclk",	R9A07G044_OSTM0_PCLK, R9A07G044_CLK_P0,
+				0x534, 0),
+	DEF_MOD("ostm1_clk",	R9A07G044_OSTM1_PCLK, R9A07G044_CLK_P0,
+				0x534, 1),
+	DEF_MOD("ostm2_pclk",	R9A07G044_OSTM2_PCLK, R9A07G044_CLK_P0,
+				0x534, 2),
 	DEF_MOD("wdt0_pclk",	R9A07G044_WDT0_PCLK, R9A07G044_CLK_P0,
 				0x548, 0),
 	DEF_MOD("wdt0_clk",	R9A07G044_WDT0_CLK, R9A07G044_OSCCLK,
@@ -253,6 +259,9 @@ static struct rzg2l_reset r9a07g044_resets[] = {
 	DEF_RST(R9A07G044_IA55_RESETN, 0x818, 0),
 	DEF_RST(R9A07G044_DMAC_ARESETN, 0x82c, 0),
 	DEF_RST(R9A07G044_DMAC_RST_ASYNC, 0x82c, 1),
+	DEF_RST(R9A07G044_OSTM0_PRESETZ, 0x834, 0),
+	DEF_RST(R9A07G044_OSTM1_PRESETZ, 0x834, 1),
+	DEF_RST(R9A07G044_OSTM2_PRESETZ, 0x834, 2),
 	DEF_RST(R9A07G044_WDT0_PRESETN, 0x848, 0),
 	DEF_RST(R9A07G044_WDT1_PRESETN, 0x848, 1),
 	DEF_RST(R9A07G044_WDT2_PRESETN, 0x848, 2),
-- 
2.17.1

[PATCH 5.10.y-cip 13/29] dt-bindings: timer: renesas: ostm: Document Renesas RZ/G2L OSTM

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit 92d06a3f67ad809649d26aa7698e4d42362585a8 upstream.

Document the General Timer Module(a.k.a OSTM) found on the RZ/G2L SoC.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211112184413.4391-3-biju.das.jz@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 .../bindings/timer/renesas,ostm.yaml          | 20 ++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
index 600d47ab7d58..7fa7f977b44c 100644
--- a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
+++ b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
@@ -21,9 +21,10 @@ properties:
   compatible:
     items:
       - enum:
-          - renesas,r7s72100-ostm # RZ/A1H
-          - renesas,r7s9210-ostm  # RZ/A2M
-      - const: renesas,ostm       # Generic
+          - renesas,r7s72100-ostm  # RZ/A1H
+          - renesas,r7s9210-ostm   # RZ/A2M
+          - renesas,r9a07g044-ostm # RZ/G2{L,LC}
+      - const: renesas,ostm        # Generic
 
   reg:
     maxItems: 1
@@ -37,6 +38,9 @@ properties:
   power-domains:
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -44,6 +48,16 @@ required:
   - clocks
   - power-domains
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,r9a07g044-ostm
+then:
+  required:
+    - resets
+
 additionalProperties: false
 
 examples:
-- 
2.17.1

[PATCH 5.10.y-cip 14/29] reset: Add of_reset_control_get_optional_exclusive()

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit c4f5b30dda01f2f6979a9681142de454991182ee upstream.

Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not specified in the device tree, this function
returns NULL instead of an error.

Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211112184413.4391-2-biju.das.jz@bp.renesas.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 include/linux/reset.h | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/include/linux/reset.h b/include/linux/reset.h
index 05aa9f440f48..13aa754d2269 100644
--- a/include/linux/reset.h
+++ b/include/linux/reset.h
@@ -253,6 +253,26 @@ static inline struct reset_control *of_reset_control_get_exclusive(
 	return __of_reset_control_get(node, id, 0, false, false, true);
 }
 
+/**
+ * of_reset_control_get_optional_exclusive - Lookup and obtain an optional exclusive
+ *                                           reference to a reset controller.
+ * @node: device to be reset by the controller
+ * @id: reset line name
+ *
+ * Optional variant of of_reset_control_get_exclusive(). If the requested reset
+ * is not specified in the device tree, this function returns NULL instead of
+ * an error.
+ *
+ * Returns a struct reset_control or IS_ERR() condition containing errno.
+ *
+ * Use of id names is optional.
+ */
+static inline struct reset_control *of_reset_control_get_optional_exclusive(
+				struct device_node *node, const char *id)
+{
+	return __of_reset_control_get(node, id, 0, false, true, true);
+}
+
 /**
  * of_reset_control_get_shared - Lookup and obtain a shared reference
  *                               to a reset controller.
-- 
2.17.1

[PATCH 5.10.y-cip 15/29] clocksource/drivers/renesas-ostm: Add RZ/G2L OSTM support

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit 3a3e9f23c2cae907677a236fa547610ca747e6fb upstream.

RZ/G2L SoC has Generic Timer Module(a.k.a OSTM) which needs to
deassert the reset line before accessing any registers.

This patch adds an entry point for RZ/G2L so that we can deassert
the reset line in probe callback.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211112184413.4391-4-biju.das.jz@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/clocksource/renesas-ostm.c | 39 +++++++++++++++++++++++++++++-
 1 file changed, 38 insertions(+), 1 deletion(-)

diff --git a/drivers/clocksource/renesas-ostm.c b/drivers/clocksource/renesas-ostm.c
index 3d06ba66008c..21d1392637b8 100644
--- a/drivers/clocksource/renesas-ostm.c
+++ b/drivers/clocksource/renesas-ostm.c
@@ -9,6 +9,8 @@
 #include <linux/clk.h>
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
 #include <linux/sched_clock.h>
 #include <linux/slab.h>
 
@@ -159,6 +161,7 @@ static int __init ostm_init_clkevt(struct timer_of *to)
 
 static int __init ostm_init(struct device_node *np)
 {
+	struct reset_control *rstc;
 	struct timer_of *to;
 	int ret;
 
@@ -166,6 +169,14 @@ static int __init ostm_init(struct device_node *np)
 	if (!to)
 		return -ENOMEM;
 
+	rstc = of_reset_control_get_optional_exclusive(np, NULL);
+	if (IS_ERR(rstc)) {
+		ret = PTR_ERR(rstc);
+		goto err_free;
+	}
+
+	reset_control_deassert(rstc);
+
 	to->flags = TIMER_OF_BASE | TIMER_OF_CLOCK;
 	if (system_clock) {
 		/*
@@ -178,7 +189,7 @@ static int __init ostm_init(struct device_node *np)
 
 	ret = timer_of_init(np, to);
 	if (ret)
-		goto err_free;
+		goto err_reset;
 
 	/*
 	 * First probed device will be used as system clocksource. Any
@@ -203,9 +214,35 @@ static int __init ostm_init(struct device_node *np)
 
 err_cleanup:
 	timer_of_cleanup(to);
+err_reset:
+	reset_control_assert(rstc);
+	reset_control_put(rstc);
 err_free:
 	kfree(to);
 	return ret;
 }
 
 TIMER_OF_DECLARE(ostm, "renesas,ostm", ostm_init);
+
+#ifdef CONFIG_ARCH_R9A07G044
+static int __init ostm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	return ostm_init(dev->of_node);
+}
+
+static const struct of_device_id ostm_of_table[] = {
+	{ .compatible = "renesas,ostm", },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver ostm_device_driver = {
+	.driver = {
+		.name = "renesas_ostm",
+		.of_match_table = of_match_ptr(ostm_of_table),
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver_probe(ostm_device_driver, ostm_probe);
+#endif
-- 
2.17.1

[PATCH 5.10.y-cip 16/29] clocksource/drivers/renesas,ostm: Make RENESAS_OSTM symbol visible

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit a2807f657976b943bf0eb81d026398d28aa89863 upstream.

As RZ/G2L uses the ARM Architected Timer as system timer, enabling
the OSTM is not mandatory.

Make RENESAS_OSTM symbol visible, so that user can enable it
when needed.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211112184413.4391-5-biju.das.jz@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/clocksource/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index a0c6e88bebe0..d528313185e8 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -531,7 +531,8 @@ config SH_TIMER_MTU2
 	  This hardware comes with 16-bit timer registers.
 
 config RENESAS_OSTM
-	bool "Renesas OSTM timer driver" if COMPILE_TEST
+	bool "Renesas OSTM timer driver"
+	depends on ARCH_RENESAS || COMPILE_TEST
 	select CLKSRC_MMIO
 	select TIMER_OF
 	help
-- 
2.17.1

[PATCH 5.10.y-cip 17/29] arm64: dts: renesas: r9a07g044: Add OSTM nodes

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit 59a7d68b69846ac012c33c1ac425b9388661d1f2 upstream.

Add OSTM{0,1,2} nodes to RZ/G2L SoC DTSI.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211118191826.2026-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 33 ++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 741621dcbbf7..26f95ccb4258 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -693,6 +693,39 @@
 			power-domains = <&cpg>;
 			status = "disabled";
 		};
+
+		ostm0: timer@12801000 {
+			compatible = "renesas,r9a07g044-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801000 0x0 0x400>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G044_OSTM0_PCLK>;
+			resets = <&cpg R9A07G044_OSTM0_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm1: timer@12801400 {
+			compatible = "renesas,r9a07g044-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801400 0x0 0x400>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G044_OSTM1_PCLK>;
+			resets = <&cpg R9A07G044_OSTM1_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm2: timer@12801800 {
+			compatible = "renesas,r9a07g044-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801800 0x0 0x400>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G044_OSTM2_PCLK>;
+			resets = <&cpg R9A07G044_OSTM2_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
 	};
 
 	timer {
-- 
2.17.1

[PATCH 5.10.y-cip 18/29] arm64: dts: renesas: rzg2l-smarc-som: Enable OSTM

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit 00d071e23c61b1be528227427da3f805feddef19 upstream.

Enable OSTM{1, 2} interfaces on RZ/G2L SMARC EVK.
OSTM0 is reserved for TF-A.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211118191826.2026-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
index c496c3bf212b..28af63324422 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
@@ -130,6 +130,14 @@
 	clock-frequency = <24000000>;
 };
 
+&ostm1 {
+	status = "okay";
+};
+
+&ostm2 {
+	status = "okay";
+};
+
 &pinctrl {
 	adc_pins: adc {
 		pinmux = <RZG2L_PORT_PINMUX(9, 0, 2)>; /* ADC_TRG */
-- 
2.17.1

[PATCH 5.10.y-cip 19/29] arm64: dts: renesas: r9a07g044: Add WDT nodes

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit eb7621ce3362639025e7db125559e235a76d814f upstream.

Add WDT{0, 1, 2} nodes to RZ/G2L SoC DTSI.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211123141420.23529-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 45 ++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 26f95ccb4258..f281d8a55044 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -694,6 +694,51 @@
 			status = "disabled";
 		};
 
+		wdt0: watchdog@12800800 {
+			compatible = "renesas,r9a07g044-wdt",
+				     "renesas,rzg2l-wdt";
+			reg = <0 0x12800800 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G044_WDT0_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_WDT0_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "wdt", "perrout";
+			resets = <&cpg R9A07G044_WDT0_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt1: watchdog@12800c00 {
+			compatible = "renesas,r9a07g044-wdt",
+				     "renesas,rzg2l-wdt";
+			reg = <0 0x12800C00 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G044_WDT1_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_WDT1_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "wdt", "perrout";
+			resets = <&cpg R9A07G044_WDT1_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt2: watchdog@12800400 {
+			compatible = "renesas,r9a07g044-wdt",
+				     "renesas,rzg2l-wdt";
+			reg = <0 0x12800400 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G044_WDT2_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_WDT2_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "wdt", "perrout";
+			resets = <&cpg R9A07G044_WDT2_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
 		ostm0: timer@12801000 {
 			compatible = "renesas,r9a07g044-ostm",
 				     "renesas,ostm";
-- 
2.17.1

[PATCH 5.10.y-cip 20/29] arm64: dts: renesas: rzg2l-smarc-som: Enable watchdog

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit 44c2d2c2d25e87741b84aaa9e0dad396abdd148d upstream.

Enable watchdog{0, 1, 2} interfaces on RZ/G2L SMARC EVK.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211123141420.23529-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
index 28af63324422..41fdae7ba66b 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
@@ -321,3 +321,18 @@
 	status = "okay";
 };
 #endif
+
+&wdt0 {
+	status = "okay";
+	timeout-sec = <60>;
+};
+
+&wdt1 {
+	status = "okay";
+	timeout-sec = <60>;
+};
+
+&wdt2 {
+	status = "okay";
+	timeout-sec = <60>;
+};
-- 
2.17.1

[PATCH 5.10.y-cip 21/29] clk: renesas: r9a07g044: Change core clock "I" from DEF_FIXED->DEF_DIV

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit d6dabaf678971733da56b2e84793348f714d42ff upstream.

Core clock "I" is sourced from CPG_PL1_DDIV divider as per HW manual
Rev.1.00.

This patch adds clock divider table "dtable_1_8" and switches to
DEF_DIV for "I" clock.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211112081003.15453-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/clk/renesas/r9a07g044-cpg.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/renesas/r9a07g044-cpg.c b/drivers/clk/renesas/r9a07g044-cpg.c
index 58746e655b64..c0ca021136fa 100644
--- a/drivers/clk/renesas/r9a07g044-cpg.c
+++ b/drivers/clk/renesas/r9a07g044-cpg.c
@@ -56,6 +56,14 @@ enum clk_ids {
 };
 
 /* Divider tables */
+static const struct clk_div_table dtable_1_8[] = {
+	{0, 1},
+	{1, 2},
+	{2, 4},
+	{3, 8},
+	{0, 0},
+};
+
 static const struct clk_div_table dtable_1_32[] = {
 	{0, 1},
 	{1, 2},
@@ -110,7 +118,8 @@ static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = {
 	DEF_FIXED(".pll6_250", CLK_PLL6_250, CLK_PLL6, 1, 2),
 
 	/* Core output clk */
-	DEF_FIXED("I", R9A07G044_CLK_I, CLK_PLL1, 1, 1),
+	DEF_DIV("I", R9A07G044_CLK_I, CLK_PLL1, DIVPL1A, dtable_1_8,
+		CLK_DIVIDER_HIWORD_MASK),
 	DEF_DIV("P0", R9A07G044_CLK_P0, CLK_PLL2_DIV2_8, DIVPL2A,
 		dtable_1_32, CLK_DIVIDER_HIWORD_MASK),
 	DEF_FIXED("P0_DIV2", R9A07G044_CLK_P0_DIV2, R9A07G044_CLK_P0, 1, 2),
-- 
2.17.1

[PATCH 5.10.y-cip 22/29] clk: renesas: r9a07g044: Add TSU clock and reset entry

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit 33b22d9c3272003a525ba2d6b7b851f3d4f30574 upstream.

Add TSU clock and reset entry to CPG driver.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211120180438.8351-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/clk/renesas/r9a07g044-cpg.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/clk/renesas/r9a07g044-cpg.c b/drivers/clk/renesas/r9a07g044-cpg.c
index c0ca021136fa..a91ccad6329b 100644
--- a/drivers/clk/renesas/r9a07g044-cpg.c
+++ b/drivers/clk/renesas/r9a07g044-cpg.c
@@ -260,6 +260,8 @@ static struct rzg2l_mod_clk r9a07g044_mod_clks[] = {
 				0x5a8, 0),
 	DEF_MOD("adc_pclk",	R9A07G044_ADC_PCLK, R9A07G044_CLK_P0,
 				0x5a8, 1),
+	DEF_MOD("tsu_pclk",	R9A07G044_TSU_PCLK, R9A07G044_CLK_TSU,
+				0x5ac, 0),
 };
 
 static struct rzg2l_reset r9a07g044_resets[] = {
@@ -308,6 +310,7 @@ static struct rzg2l_reset r9a07g044_resets[] = {
 	DEF_RST(R9A07G044_GPIO_SPARE_RESETN, 0x898, 2),
 	DEF_RST(R9A07G044_ADC_PRESETN, 0x8a8, 0),
 	DEF_RST(R9A07G044_ADC_ADRST_N, 0x8a8, 1),
+	DEF_RST(R9A07G044_TSU_PRESETN, 0x8ac, 0),
 };
 
 static const unsigned int r9a07g044_crit_mod_clks[] __initconst = {
-- 
2.17.1

[PATCH 5.10.y-cip 23/29] clk: renesas: r9a07g044: Rename CLK_PLL3_DIV4 macro

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit 98ee8b2f66ebff2fafe85668b9d00c3433b76566 upstream.

Rename the macro CLK_PLL3_DIV4->CLK_PLL3_DIV2_2 to match the clock tree
mentioned in the hardware manual(Rev.1.00 Sep, 2021).

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211203115154.31864-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/clk/renesas/r9a07g044-cpg.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/renesas/r9a07g044-cpg.c b/drivers/clk/renesas/r9a07g044-cpg.c
index a91ccad6329b..0962f25cd3f0 100644
--- a/drivers/clk/renesas/r9a07g044-cpg.c
+++ b/drivers/clk/renesas/r9a07g044-cpg.c
@@ -32,9 +32,9 @@ enum clk_ids {
 	CLK_PLL3_400,
 	CLK_PLL3_533,
 	CLK_PLL3_DIV2,
+	CLK_PLL3_DIV2_2,
 	CLK_PLL3_DIV2_4,
 	CLK_PLL3_DIV2_4_2,
-	CLK_PLL3_DIV4,
 	CLK_SEL_PLL3_3,
 	CLK_DIV_PLL3_C,
 	CLK_PLL4,
@@ -106,9 +106,9 @@ static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = {
 	DEF_FIXED(".pll2_div2_10", CLK_PLL2_DIV2_10, CLK_PLL2_DIV2, 1, 10),
 
 	DEF_FIXED(".pll3_div2", CLK_PLL3_DIV2, CLK_PLL3, 1, 2),
+	DEF_FIXED(".pll3_div2_2", CLK_PLL3_DIV2_2, CLK_PLL3_DIV2, 1, 2),
 	DEF_FIXED(".pll3_div2_4", CLK_PLL3_DIV2_4, CLK_PLL3_DIV2, 1, 4),
 	DEF_FIXED(".pll3_div2_4_2", CLK_PLL3_DIV2_4_2, CLK_PLL3_DIV2_4, 1, 2),
-	DEF_FIXED(".pll3_div4", CLK_PLL3_DIV4, CLK_PLL3, 1, 4),
 	DEF_MUX(".sel_pll3_3", CLK_SEL_PLL3_3, SEL_PLL3_3,
 		sel_pll3_3, ARRAY_SIZE(sel_pll3_3), 0, CLK_MUX_READ_ONLY),
 	DEF_DIV("divpl3c", CLK_DIV_PLL3_C, CLK_SEL_PLL3_3,
-- 
2.17.1

Re: [PATCH 5.10.y-cip 23/29] clk: renesas: r9a07g044: Rename CLK_PLL3_DIV4 macro

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1110 bytes --]

Hi!

> Rename the macro CLK_PLL3_DIV4->CLK_PLL3_DIV2_2 to match the clock tree
> mentioned in the hardware manual(Rev.1.00 Sep, 2021).

Changelog says rename,

> @@ -106,9 +106,9 @@ static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = {
>  	DEF_FIXED(".pll2_div2_10", CLK_PLL2_DIV2_10, CLK_PLL2_DIV2, 1, 10),
>  
>  	DEF_FIXED(".pll3_div2", CLK_PLL3_DIV2, CLK_PLL3, 1, 2),
> +	DEF_FIXED(".pll3_div2_2", CLK_PLL3_DIV2_2, CLK_PLL3_DIV2, 1, 2),
>  	DEF_FIXED(".pll3_div2_4", CLK_PLL3_DIV2_4, CLK_PLL3_DIV2, 1, 4),
>  	DEF_FIXED(".pll3_div2_4_2", CLK_PLL3_DIV2_4_2, CLK_PLL3_DIV2_4, 1, 2),
> -	DEF_FIXED(".pll3_div4", CLK_PLL3_DIV4, CLK_PLL3, 1, 4),
>  	DEF_MUX(".sel_pll3_3", CLK_SEL_PLL3_3, SEL_PLL3_3,
>  		sel_pll3_3, ARRAY_SIZE(sel_pll3_3), 0, CLK_MUX_READ_ONLY),
>  	DEF_DIV("divpl3c", CLK_DIV_PLL3_C, CLK_SEL_PLL3_3,

but macro arguments are changed, so I want to make sure it was
intended.

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

RE: [PATCH 5.10.y-cip 23/29] clk: renesas: r9a07g044: Rename CLK_PLL3_DIV4 macro

[Prabhakar Mahadev Lad]

Hi Pavel,

Thank you for the review.

> -----Original Message-----
> From: Pavel Machek <pavel@denx.de>
> Sent: 05 April 2022 20:01
> To: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Cc: cip-dev@lists.cip-project.org; Nobuhiro Iwamatsu
> <nobuhiro1.iwamatsu@toshiba.co.jp>; Pavel Machek <pavel@denx.de>; Biju Das
> <biju.das.jz@bp.renesas.com>
> Subject: Re: [PATCH 5.10.y-cip 23/29] clk: renesas: r9a07g044: Rename
> CLK_PLL3_DIV4 macro
> 
> Hi!
> 
> > Rename the macro CLK_PLL3_DIV4->CLK_PLL3_DIV2_2 to match the clock
> > tree mentioned in the hardware manual(Rev.1.00 Sep, 2021).
> 
> Changelog says rename,
> 
> > @@ -106,9 +106,9 @@ static const struct cpg_core_clk
> r9a07g044_core_clks[] __initconst = {
> >  	DEF_FIXED(".pll2_div2_10", CLK_PLL2_DIV2_10, CLK_PLL2_DIV2, 1, 10),
> >
> >  	DEF_FIXED(".pll3_div2", CLK_PLL3_DIV2, CLK_PLL3, 1, 2),
> > +	DEF_FIXED(".pll3_div2_2", CLK_PLL3_DIV2_2, CLK_PLL3_DIV2, 1, 2),
> >  	DEF_FIXED(".pll3_div2_4", CLK_PLL3_DIV2_4, CLK_PLL3_DIV2, 1, 4),
> >  	DEF_FIXED(".pll3_div2_4_2", CLK_PLL3_DIV2_4_2, CLK_PLL3_DIV2_4, 1,
> 2),
> > -	DEF_FIXED(".pll3_div4", CLK_PLL3_DIV4, CLK_PLL3, 1, 4),
> >  	DEF_MUX(".sel_pll3_3", CLK_SEL_PLL3_3, SEL_PLL3_3,
> >  		sel_pll3_3, ARRAY_SIZE(sel_pll3_3), 0, CLK_MUX_READ_ONLY),
> >  	DEF_DIV("divpl3c", CLK_DIV_PLL3_C, CLK_SEL_PLL3_3,
> 
> but macro arguments are changed, so I want to make sure it was intended.
> 
thanks for the eagle eye, yes the change was intended.

Cheers,
Prabhakar

> Best regards,
> 								Pavel
> --
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[PATCH 5.10.y-cip 24/29] clk: renesas: rzg2l: Add CPG_PL1_DDIV macro

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit 86e122c0754951094a3857870ad9f4022e056f6b upstream.

Core clock "I" is sourced from  CPG_PL1_DDIV which controls CPU
frequency. Define CPG_PL1_DDIV, so that we can register it as a
clock divider in later patch.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211112081003.15453-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/clk/renesas/rzg2l-cpg.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/renesas/rzg2l-cpg.h b/drivers/clk/renesas/rzg2l-cpg.h
index 484c7cee2629..fce4a8f35410 100644
--- a/drivers/clk/renesas/rzg2l-cpg.h
+++ b/drivers/clk/renesas/rzg2l-cpg.h
@@ -9,6 +9,7 @@
 #ifndef __RENESAS_RZG2L_CPG_H__
 #define __RENESAS_RZG2L_CPG_H__
 
+#define CPG_PL1_DDIV		(0x200)
 #define CPG_PL2_DDIV		(0x204)
 #define CPG_PL3A_DDIV		(0x208)
 #define CPG_PL2SDHI_DSEL	(0x218)
@@ -29,6 +30,7 @@
 
 #define DDIV_PACK(offset, bitpos, size) \
 		(((offset) << 20) | ((bitpos) << 12) | ((size) << 8))
+#define DIVPL1A		DDIV_PACK(CPG_PL1_DDIV, 0, 2)
 #define DIVPL2A		DDIV_PACK(CPG_PL2_DDIV, 0, 3)
 #define DIVPL3A		DDIV_PACK(CPG_PL3A_DDIV, 0, 3)
 #define DIVPL3B		DDIV_PACK(CPG_PL3A_DDIV, 4, 3)
-- 
2.17.1

[PATCH 5.10.y-cip 25/29] dt-bindings: thermal: Document Renesas RZ/G2L TSU

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit 9460347192add5644236d492f79ecab6d83504d4 upstream.

Document the Thermal Sensor Unit(TSU) in the RZ/G2L SoC.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211130155757.17837-2-biju.das.jz@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 .../bindings/thermal/rzg2l-thermal.yaml       | 76 +++++++++++++++++++
 1 file changed, 76 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml

diff --git a/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
new file mode 100644
index 000000000000..ccab9511a042
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/rzg2l-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L Thermal Sensor Unit
+
+description:
+  On RZ/G2L SoCs, the thermal sensor unit (TSU) measures the
+  temperature(Tj) inside the LSI.
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-tsu # RZ/G2{L,LC}
+      - const: renesas,rzg2l-tsu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - resets
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    tsu: thermal@10059400 {
+            compatible = "renesas,r9a07g044-tsu",
+                         "renesas,rzg2l-tsu";
+            reg = <0x10059400 0x400>;
+            clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>;
+            resets = <&cpg R9A07G044_TSU_PRESETN>;
+            power-domains = <&cpg>;
+            #thermal-sensor-cells = <1>;
+    };
+
+    thermal-zones {
+            cpu-thermal {
+                    polling-delay-passive = <250>;
+                    polling-delay = <1000>;
+                    thermal-sensors = <&tsu 0>;
+
+                    trips {
+                            sensor_crit: sensor-crit {
+                                    temperature = <125000>;
+                                    hysteresis = <1000>;
+                                    type = "critical";
+                            };
+                    };
+            };
+    };
-- 
2.17.1

[PATCH 5.10.y-cip 26/29] thermal/drivers: Add TSU driver for RZ/G2L

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit 673c68bd48390dad01f7d17670de3e33b60860ac upstream.

The RZ/G2L SoC incorporates a thermal sensor unit (TSU) that measures the
temperature inside the LSI.

The thermal sensor in this unit measures temperatures in the range from
−40 degree Celsius to 125 degree Celsius with an accuracy of ±3°C. The
TSU repeats measurement at 20 microseconds intervals and automatically
updates the results of measurement.

The TSU has no interrupts as well as no external pins.

This patch adds Thermal Sensor Unit(TSU) driver for RZ/G2L SoC.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211130155757.17837-3-biju.das.jz@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[PL: Dropped including math.h]
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/thermal/Kconfig         |   9 ++
 drivers/thermal/Makefile        |   1 +
 drivers/thermal/rzg2l_thermal.c | 239 ++++++++++++++++++++++++++++++++
 3 files changed, 249 insertions(+)
 create mode 100644 drivers/thermal/rzg2l_thermal.c

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 7edc8dc6bbab..e51c8cc989d8 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -354,6 +354,15 @@ config RCAR_GEN3_THERMAL
 	  Enable this to plug the R-Car Gen3 or RZ/G2 thermal sensor driver into
 	  the Linux thermal framework.
 
+config RZG2L_THERMAL
+	tristate "Renesas RZ/G2L thermal driver"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on OF
+	help
+	  Enable this to plug the RZ/G2L thermal sensor driver into the Linux
+	  thermal framework.
+
 config KIRKWOOD_THERMAL
 	tristate "Temperature sensor on Marvell Kirkwood SoCs"
 	depends on MACH_KIRKWOOD || COMPILE_TEST
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index b64dd50a6629..b71f9b88b567 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_SUN8I_THERMAL)     += sun8i_thermal.o
 obj-$(CONFIG_ROCKCHIP_THERMAL)	+= rockchip_thermal.o
 obj-$(CONFIG_RCAR_THERMAL)	+= rcar_thermal.o
 obj-$(CONFIG_RCAR_GEN3_THERMAL)	+= rcar_gen3_thermal.o
+obj-$(CONFIG_RZG2L_THERMAL)	+= rzg2l_thermal.o
 obj-$(CONFIG_KIRKWOOD_THERMAL)  += kirkwood_thermal.o
 obj-y				+= samsung/
 obj-$(CONFIG_DOVE_THERMAL)  	+= dove_thermal.o
diff --git a/drivers/thermal/rzg2l_thermal.c b/drivers/thermal/rzg2l_thermal.c
new file mode 100644
index 000000000000..46f1134a6987
--- /dev/null
+++ b/drivers/thermal/rzg2l_thermal.c
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G2L TSU Thermal Sensor Driver
+ *
+ * Copyright (C) 2021 Renesas Electronics Corporation
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/thermal.h>
+#include <linux/units.h>
+
+#include "thermal_hwmon.h"
+
+#define CTEMP_MASK	0xFFF
+
+/* default calibration values, if FUSE values are missing */
+#define SW_CALIB0_VAL	3148
+#define SW_CALIB1_VAL	503
+
+/* Register offsets */
+#define TSU_SM		0x00
+#define TSU_ST		0x04
+#define TSU_SAD		0x0C
+#define TSU_SS		0x10
+
+#define OTPTSUTRIM_REG(n)	(0x18 + ((n) * 0x4))
+
+/* Sensor Mode Register(TSU_SM) */
+#define TSU_SM_EN_TS		BIT(0)
+#define TSU_SM_ADC_EN_TS	BIT(1)
+#define TSU_SM_NORMAL_MODE	(TSU_SM_EN_TS | TSU_SM_ADC_EN_TS)
+
+/* TSU_ST bits */
+#define TSU_ST_START		BIT(0)
+
+#define TSU_SS_CONV_RUNNING	BIT(0)
+
+#define TS_CODE_AVE_SCALE(x)	((x) * 1000000)
+#define MCELSIUS(temp)		((temp) * MILLIDEGREE_PER_DEGREE)
+#define TS_CODE_CAP_TIMES	8	/* Capture  times */
+
+#define RZG2L_THERMAL_GRAN	500	/* milli Celsius */
+#define RZG2L_TSU_SS_TIMEOUT_US	1000
+
+#define CURVATURE_CORRECTION_CONST	13
+
+struct rzg2l_thermal_priv {
+	struct device *dev;
+	void __iomem *base;
+	struct thermal_zone_device *zone;
+	struct reset_control *rstc;
+	u32 calib0, calib1;
+};
+
+static inline u32 rzg2l_thermal_read(struct rzg2l_thermal_priv *priv, u32 reg)
+{
+	return ioread32(priv->base + reg);
+}
+
+static inline void rzg2l_thermal_write(struct rzg2l_thermal_priv *priv, u32 reg,
+				       u32 data)
+{
+	iowrite32(data, priv->base + reg);
+}
+
+static int rzg2l_thermal_get_temp(void *devdata, int *temp)
+{
+	struct rzg2l_thermal_priv *priv = devdata;
+	u32 result = 0, dsensor, ts_code_ave;
+	int val, i;
+
+	for (i = 0; i < TS_CODE_CAP_TIMES ; i++) {
+		/* TSU repeats measurement at 20 microseconds intervals and
+		 * automatically updates the results of measurement. As per
+		 * the HW manual for measuring temperature we need to read 8
+		 * values consecutively and then take the average.
+		 * ts_code_ave = (ts_code[0] + ⋯ + ts_code[7]) / 8
+		 */
+		result += rzg2l_thermal_read(priv, TSU_SAD) & CTEMP_MASK;
+		usleep_range(20, 30);
+	}
+
+	ts_code_ave = result / TS_CODE_CAP_TIMES;
+
+	/* Calculate actual sensor value by applying curvature correction formula
+	 * dsensor = ts_code_ave / (1 + ts_code_ave * 0.000013). Here we are doing
+	 * integer calculation by scaling all the values by 1000000.
+	 */
+	dsensor = TS_CODE_AVE_SCALE(ts_code_ave) /
+		(TS_CODE_AVE_SCALE(1) + (ts_code_ave * CURVATURE_CORRECTION_CONST));
+
+	/* The temperature Tj is calculated by the formula
+	 * Tj = (dsensor − calib1) * 165/ (calib0 − calib1) − 40
+	 * where calib0 and calib1 are the caliberation values.
+	 */
+	val = ((dsensor - priv->calib1) * (MCELSIUS(165) /
+		(priv->calib0 - priv->calib1))) - MCELSIUS(40);
+
+	*temp = roundup(val, RZG2L_THERMAL_GRAN);
+
+	return 0;
+}
+
+static const struct thermal_zone_of_device_ops rzg2l_tz_of_ops = {
+	.get_temp = rzg2l_thermal_get_temp,
+};
+
+static int rzg2l_thermal_init(struct rzg2l_thermal_priv *priv)
+{
+	u32 reg_val;
+
+	rzg2l_thermal_write(priv, TSU_SM, TSU_SM_NORMAL_MODE);
+	rzg2l_thermal_write(priv, TSU_ST, 0);
+
+	/* Before setting the START bit, TSU should be in normal operating
+	 * mode. As per the HW manual, it will take 60 µs to place the TSU
+	 * into normal operating mode.
+	 */
+	usleep_range(60, 80);
+
+	reg_val = rzg2l_thermal_read(priv, TSU_ST);
+	reg_val |= TSU_ST_START;
+	rzg2l_thermal_write(priv, TSU_ST, reg_val);
+
+	return readl_poll_timeout(priv->base + TSU_SS, reg_val,
+				  reg_val == TSU_SS_CONV_RUNNING, 50,
+				  RZG2L_TSU_SS_TIMEOUT_US);
+}
+
+static void rzg2l_thermal_reset_assert_pm_disable_put(struct platform_device *pdev)
+{
+	struct rzg2l_thermal_priv *priv = dev_get_drvdata(&pdev->dev);
+
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	reset_control_assert(priv->rstc);
+}
+
+static int rzg2l_thermal_remove(struct platform_device *pdev)
+{
+	struct rzg2l_thermal_priv *priv = dev_get_drvdata(&pdev->dev);
+
+	thermal_remove_hwmon_sysfs(priv->zone);
+	rzg2l_thermal_reset_assert_pm_disable_put(pdev);
+
+	return 0;
+}
+
+static int rzg2l_thermal_probe(struct platform_device *pdev)
+{
+	struct thermal_zone_device *zone;
+	struct rzg2l_thermal_priv *priv;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->dev = dev;
+	priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(priv->rstc))
+		return dev_err_probe(dev, PTR_ERR(priv->rstc),
+				     "failed to get cpg reset");
+
+	reset_control_deassert(priv->rstc);
+
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	priv->calib0 = rzg2l_thermal_read(priv, OTPTSUTRIM_REG(0));
+	if (!priv->calib0)
+		priv->calib0 = SW_CALIB0_VAL;
+
+	priv->calib1 = rzg2l_thermal_read(priv, OTPTSUTRIM_REG(1));
+	if (!priv->calib1)
+		priv->calib1 = SW_CALIB1_VAL;
+
+	platform_set_drvdata(pdev, priv);
+	ret = rzg2l_thermal_init(priv);
+	if (ret) {
+		dev_err(dev, "Failed to start TSU");
+		goto err;
+	}
+
+	zone = devm_thermal_zone_of_sensor_register(dev, 0, priv,
+						    &rzg2l_tz_of_ops);
+	if (IS_ERR(zone)) {
+		dev_err(dev, "Can't register thermal zone");
+		ret = PTR_ERR(zone);
+		goto err;
+	}
+
+	priv->zone = zone;
+	priv->zone->tzp->no_hwmon = false;
+	ret = thermal_add_hwmon_sysfs(priv->zone);
+	if (ret)
+		goto err;
+
+	dev_dbg(dev, "TSU probed with %s caliberation values",
+		rzg2l_thermal_read(priv, OTPTSUTRIM_REG(0)) ?  "hw" : "sw");
+
+	return 0;
+
+err:
+	rzg2l_thermal_reset_assert_pm_disable_put(pdev);
+	return ret;
+}
+
+static const struct of_device_id rzg2l_thermal_dt_ids[] = {
+	{ .compatible = "renesas,rzg2l-tsu", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rzg2l_thermal_dt_ids);
+
+static struct platform_driver rzg2l_thermal_driver = {
+	.driver = {
+		.name = "rzg2l_thermal",
+		.of_match_table = rzg2l_thermal_dt_ids,
+	},
+	.probe = rzg2l_thermal_probe,
+	.remove = rzg2l_thermal_remove,
+};
+module_platform_driver(rzg2l_thermal_driver);
+
+MODULE_DESCRIPTION("Renesas RZ/G2L TSU Thermal Sensor Driver");
+MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1

Re: [PATCH 5.10.y-cip 26/29] thermal/drivers: Add TSU driver for RZ/G2L

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1356 bytes --]

Hi!

> From: Biju Das <biju.das.jz@bp.renesas.com>
> 
> commit 673c68bd48390dad01f7d17670de3e33b60860ac upstream.
> 
> The RZ/G2L SoC incorporates a thermal sensor unit (TSU) that measures the
> temperature inside the LSI.
> 
> The thermal sensor in this unit measures temperatures in the range from
> −40 degree Celsius to 125 degree Celsius with an accuracy of ±3°C. The
> TSU repeats measurement at 20 microseconds intervals and automatically
> updates the results of measurement.
> 
> The TSU has no interrupts as well as no external pins.
> 
> This patch adds Thermal Sensor Unit(TSU) driver for RZ/G2L SoC.

> +		/* TSU repeats measurement at 20 microseconds intervals and
...
> +		 * ts_code_ave = (ts_code[0] + ⋯ + ts_code[7]) / 8
> +		 */

> +	/* The temperature Tj is calculated by the formula
> +	 * Tj = (dsensor − calib1) * 165/ (calib0 − calib1) − 40
> +	 * where calib0 and calib1 are the caliberation values.
> +	 */

I'd avoid using non-ASCII characters where possible. ... is not that
much longer, and that symbol should really be -.

Also comments should start with /* on separate line, but that's really
detail.

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

RE: [PATCH 5.10.y-cip 26/29] thermal/drivers: Add TSU driver for RZ/G2L

[Prabhakar Mahadev Lad]

Hi Pavel,

Thank you for the review.

> -----Original Message-----
> From: Pavel Machek <pavel@denx.de>
> Sent: 05 April 2022 20:06
> To: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Cc: cip-dev@lists.cip-project.org; Nobuhiro Iwamatsu
> <nobuhiro1.iwamatsu@toshiba.co.jp>; Pavel Machek <pavel@denx.de>; Biju Das
> <biju.das.jz@bp.renesas.com>
> Subject: Re: [PATCH 5.10.y-cip 26/29] thermal/drivers: Add TSU driver for
> RZ/G2L
> 
> Hi!
> 
> > From: Biju Das <biju.das.jz@bp.renesas.com>
> >
> > commit 673c68bd48390dad01f7d17670de3e33b60860ac upstream.
> >
> > The RZ/G2L SoC incorporates a thermal sensor unit (TSU) that measures
> > the temperature inside the LSI.
> >
> > The thermal sensor in this unit measures temperatures in the range
> > from
> > −40 degree Celsius to 125 degree Celsius with an accuracy of ±3°C. The
> > TSU repeats measurement at 20 microseconds intervals and automatically
> > updates the results of measurement.
> >
> > The TSU has no interrupts as well as no external pins.
> >
> > This patch adds Thermal Sensor Unit(TSU) driver for RZ/G2L SoC.
> 
> > +		/* TSU repeats measurement at 20 microseconds intervals and
> ...
> > +		 * ts_code_ave = (ts_code[0] + ⋯ + ts_code[7]) / 8
> > +		 */
> 
> > +	/* The temperature Tj is calculated by the formula
> > +	 * Tj = (dsensor − calib1) * 165/ (calib0 − calib1) − 40
> > +	 * where calib0 and calib1 are the caliberation values.
> > +	 */
> 
> I'd avoid using non-ASCII characters where possible. ... is not that much
> longer, and that symbol should really be -.
> 
> Also comments should start with /* on separate line, but that's really
> detail.
> 
Agreed.

Cheers,
Prabhakar

> Best regards,
> 								Pavel
> --
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[PATCH 5.10.y-cip 27/29] arm64: dts: renesas: r9a07g044: Add OPP table

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit 36959e2108b6e3d66a3a6a1526e8e45f8abad14c upstream.

Add OPP table for RZ/G2L SoC.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211124154316.28365-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 31 ++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index f281d8a55044..c26effa8882b 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -28,6 +28,33 @@
 		clock-frequency = <0>;
 	};
 
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -49,6 +76,8 @@
 			device_type = "cpu";
 			next-level-cache = <&L3_CA55>;
 			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G044_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
 		};
 
 		cpu1: cpu@100 {
@@ -57,6 +86,8 @@
 			device_type = "cpu";
 			next-level-cache = <&L3_CA55>;
 			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G044_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
 		};
 
 		L3_CA55: cache-controller-0 {
-- 
2.17.1

[PATCH 5.10.y-cip 28/29] arm64: dts: renesas: r9a07g044: Add TSU node

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit 844dd4378453ad8234498ebc330887209e8ad346 upstream.

Add TSU node to RZ/G2L SoC DTSI.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211208142729.2456-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index c26effa8882b..666e5d890b91 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -441,6 +441,16 @@
 			};
 		};
 
+		tsu: thermal@10059400 {
+			compatible = "renesas,r9a07g044-tsu",
+				     "renesas,rzg2l-tsu";
+			reg = <0 0x10059400 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>;
+			resets = <&cpg R9A07G044_TSU_PRESETN>;
+			power-domains = <&cpg>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		sbc: spi@10060000 {
 			compatible = "renesas,r9a07g044-rpc-if",
 				     "renesas,rzg2l-rpc-if";
@@ -804,6 +814,22 @@
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsu 0>;
+
+			trips {
+				sensor_crit: sensor-crit {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-- 
2.17.1

[PATCH 5.10.y-cip 29/29] arm64: dts: renesas: r9a07g044: Create thermal zone to support IPA

[Lad Prabhakar]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit 88404c56fde05eb741552a33fdfe6d7d20c1c986 upstream.

Setup a thermal zone driven by SoC temperature sensor.
Create passive trip points and bind them to CPUFreq cooling
device that supports power extension.

Based on the work done by Dien Pham <dien.pham.ry@renesas.com>
and others for r8a77990 SoC.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211208142729.2456-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 666e5d890b91..6ff3f81334cf 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -74,6 +74,7 @@
 			compatible = "arm,cortex-a55";
 			reg = <0>;
 			device_type = "cpu";
+			#cooling-cells = <2>;
 			next-level-cache = <&L3_CA55>;
 			enable-method = "psci";
 			clocks = <&cpg CPG_CORE R9A07G044_CLK_I>;
@@ -819,6 +820,15 @@
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsu 0>;
+			sustainable-power = <717>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 0 2>;
+					contribution = <1024>;
+				};
+			};
 
 			trips {
 				sensor_crit: sensor-crit {
@@ -826,6 +836,12 @@
 					hysteresis = <1000>;
 					type = "critical";
 				};
+
+				target: trip-point {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
 			};
 		};
 	};
-- 
2.17.1

Re: [PATCH 5.10.y-cip 00/29] Add RSPI/OSTM/WDT/TSU/OPP support to Renesas RZ/G2L SoC

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 519 bytes --]

Hi!

> This patch series adds support for following to Renesas RZ/RGL SoC:
> * RSPI
> * WDT
> * OSTM
> * TSU/OPP/IPA
> 
> All the patches have been cherry-picked from v5.17 release.

Thanks for the series. It passes testing and I do not see any problems
that would prevent merge. I can merge it if there are no other
comments.

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

RE: [PATCH 5.10.y-cip 00/29] Add RSPI/OSTM/WDT/TSU/OPP support to Renesas RZ/G2L SoC

[nobuhiro1.iwamatsu]

Hi all,

> 
> Hi All,
> 
> This patch series adds support for following to Renesas RZ/RGL SoC:
> * RSPI
> * WDT
> * OSTM
> * TSU/OPP/IPA
> 
> All the patches have been cherry-picked from v5.17 release.

Looks good to me this series.
I applied to Linux-5.10.y-cip tree.

Best regards,
  Nobuhiro

RE: [PATCH 5.10.y-cip 00/29] Add RSPI/OSTM/WDT/TSU/OPP support to Renesas RZ/G2L SoC

[Prabhakar Mahadev Lad]

Hi Nobuhiro, Pavel,

> -----Original Message-----
> From: nobuhiro1.iwamatsu@toshiba.co.jp <nobuhiro1.iwamatsu@toshiba.co.jp>
> Sent: 05 April 2022 08:46
> To: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>; cip-
> dev@lists.cip-project.org; pavel@denx.de
> Cc: Biju Das <biju.das.jz@bp.renesas.com>
> Subject: RE: [PATCH 5.10.y-cip 00/29] Add RSPI/OSTM/WDT/TSU/OPP support to
> Renesas RZ/G2L SoC
> 
> Hi all,
> 
> >
> > Hi All,
> >
> > This patch series adds support for following to Renesas RZ/RGL SoC:
> > * RSPI
> > * WDT
> > * OSTM
> > * TSU/OPP/IPA
> >
> > All the patches have been cherry-picked from v5.17 release.
> 
> Looks good to me this series.
> I applied to Linux-5.10.y-cip tree.
> 

Thank you for the review and acceptance.

Cheers,
Prabhakar