[PATCH 5.10 000/129] 5.10.114-rc1 review

[PATCH 5.10 000/129] 5.10.114-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.10.114 release.
There are 129 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri, 06 May 2022 15:25:19 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.114-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.10.114-rc1

Namhyung Kim <namhyung@kernel.org>
    perf symbol: Remove arch__symbols__fixup_end()

Daniel Starke <daniel.starke@siemens.com>
    tty: n_gsm: fix software flow control handling

Daniel Starke <daniel.starke@siemens.com>
    tty: n_gsm: fix incorrect UA handling

Daniel Starke <daniel.starke@siemens.com>
    tty: n_gsm: fix reset fifo race condition

Daniel Starke <daniel.starke@siemens.com>
    tty: n_gsm: fix wrong command frame length field encoding

Daniel Starke <daniel.starke@siemens.com>
    tty: n_gsm: fix wrong command retry handling

Daniel Starke <daniel.starke@siemens.com>
    tty: n_gsm: fix missing explicit ldisc flush

Daniel Starke <daniel.starke@siemens.com>
    tty: n_gsm: fix wrong DLCI release order

Daniel Starke <daniel.starke@siemens.com>
    tty: n_gsm: fix insufficient txframe size

Florian Westphal <fw@strlen.de>
    netfilter: nft_socket: only do sk lookups when indev is available

Daniel Starke <daniel.starke@siemens.com>
    tty: n_gsm: fix malformed counter for out of frame data

Daniel Starke <daniel.starke@siemens.com>
    tty: n_gsm: fix wrong signal octet encoding in convergence layer type 2

Daniel Starke <daniel.starke@siemens.com>
    tty: n_gsm: fix mux cleanup after unregister tty device

Daniel Starke <daniel.starke@siemens.com>
    tty: n_gsm: fix decoupled mux resource

Daniel Starke <daniel.starke@siemens.com>
    tty: n_gsm: fix restart handling via CLD command

Namhyung Kim <namhyung@kernel.org>
    perf symbol: Update symbols__fixup_end()

Namhyung Kim <namhyung@kernel.org>
    perf symbol: Pass is_kallsyms to symbols__fixup_end()

Borislav Petkov <bp@suse.de>
    x86/cpu: Load microcode during restore_processor_state()

Kees Cook <keescook@chromium.org>
    thermal: int340x: Fix attr.show callback prototype

Dinh Nguyen <dinguyen@kernel.org>
    net: ethernet: stmmac: fix write to sgmii_adapter_base

Imre Deak <imre.deak@intel.com>
    drm/i915: Fix SEL_FETCH_PLANE_*(PIPE_B+) register addresses

Zqiang <qiang1.zhang@intel.com>
    kasan: prevent cpu_quarantine corruption when CPU offline and cache shrink occur at same time

Damien Le Moal <damien.lemoal@opensource.wdc.com>
    zonefs: Clear inode information flags on inode creation

Damien Le Moal <damien.lemoal@opensource.wdc.com>
    zonefs: Fix management of open zones

Alexey Kardashevskiy <aik@ozlabs.ru>
    powerpc/perf: Fix 32bit compile

Duoming Zhou <duoming@zju.edu.cn>
    drivers: net: hippi: Fix deadlock in rr_close()

Ronnie Sahlberg <lsahlber@redhat.com>
    cifs: destage any unwritten data to the server before calling copychunk_write

Mikulas Patocka <mpatocka@redhat.com>
    x86: __memcpy_flushcache: fix wrong alignment if size > 2^32

Ye Bin <yebin10@huawei.com>
    ext4: fix bug_on in start_this_handle during umount filesystem

Zheyu Ma <zheyuma97@gmail.com>
    ASoC: wm8731: Disable the regulator when probing fails

Chao Song <chao.song@linux.intel.com>
    ASoC: Intel: soc-acpi: correct device endpoints for max98373

Pengcheng Yang <yangpc@wangsu.com>
    tcp: fix F-RTO may not work correctly when receiving DSACK

Dany Madden <drt@linux.ibm.com>
    Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"

Lijun Pan <lijunp213@gmail.com>
    ibmvnic: fix miscellaneous checks

Leon Romanovsky <leon@kernel.org>
    ixgbe: ensure IPsec VF<->PF compatibility

Yang Yingliang <yangyingliang@huawei.com>
    net: fec: add missing of_node_put() in fec_enet_init_stop_mode()

Manish Chopra <manishc@marvell.com>
    bnx2x: fix napi API usage sequence

Maxim Mikityanskiy <maximmi@nvidia.com>
    tls: Skip tls_append_frag on zero copy size

Miaoqian Lin <linmq006@gmail.com>
    drm/amd/display: Fix memory leak in dcn21_clock_source_create

David Yat Sin <david.yatsin@amd.com>
    drm/amdkfd: Fix GWS queue count

Martin Blumenstingl <martin.blumenstingl@googlemail.com>
    net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK

Baruch Siach <baruch.siach@siklu.com>
    net: phy: marvell10g: fix return value on error

Jonathan Lemon <jonathan.lemon@gmail.com>
    net: bcmgenet: hide status block before TX timestamping

Yang Yingliang <yangyingliang@huawei.com>
    clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource()

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create()

Eric Dumazet <edumazet@google.com>
    tcp: make sure treq->af_specific is initialized

Eric Dumazet <edumazet@google.com>
    tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT

Peilin Ye <peilin.ye@bytedance.com>
    ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md mode

Peilin Ye <peilin.ye@bytedance.com>
    ip6_gre: Make o_seqno start from 0 in native mode

Peilin Ye <peilin.ye@bytedance.com>
    ip_gre: Make o_seqno start from 0 in native mode

liuyacan <liuyacan@corp.netease.com>
    net/smc: sync err code when tcp connection was refused

Jian Shen <shenjian15@huawei.com>
    net: hns3: add return value for mailbox handling in PF

Jian Shen <shenjian15@huawei.com>
    net: hns3: add validity check for message data length

Jie Wang <wangjie125@huawei.com>
    net: hns3: modify the return code of hclge_get_ring_chain_from_mbx

Xiaobing Luo <luoxiaobing0926@gmail.com>
    cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe

Lv Ruyi <lv.ruyi@zte.com.cn>
    pinctrl: pistachio: fix use of irq_of_parse_and_map()

Fabio Estevam <festevam@denx.de>
    arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock

Max Krummenacher <max.krummenacher@toradex.com>
    ARM: dts: imx6ull-colibri: fix vqmmc regulator

Xin Long <lucien.xin@gmail.com>
    sctp: check asoc strreset_chunk in sctp_generate_reconf_event

Nikolay Aleksandrov <razor@blackwall.org>
    wireguard: device: check for metadata_dst with skb_valid_dst()

Pengcheng Yang <yangpc@wangsu.com>
    tcp: ensure to use the most recently sent skb when filling the rate sample

Marek Vasut <marex@denx.de>
    pinctrl: stm32: Keep pinctrl block clock enabled when LEVEL IRQ requested

Francesco Ruggeri <fruggeri@arista.com>
    tcp: md5: incorrect tcp_header_len for incoming connections

Luca Ceresoli <luca.ceresoli@bootlin.com>
    pinctrl: rockchip: fix RK3308 pinmux bits

Eyal Birger <eyal.birger@gmail.com>
    bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nft_set_rbtree: overlap detection with element re-addition after deletion

Miaoqian Lin <linmq006@gmail.com>
    net: dsa: Add missing of_node_put() in dsa_port_link_register_of

Geert Uytterhoeven <geert+renesas@glider.be>
    memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode

Marek Vasut <marex@denx.de>
    pinctrl: stm32: Do not call stm32_gpio_get() for edge triggered IRQs in EOI

Oleksandr Ocheretnyi <oocheret@cisco.com>
    mtd: fix 'part' field data corruption in mtd_info

Miaoqian Lin <linmq006@gmail.com>
    mtd: rawnand: Fix return value check of wait_for_completion_timeout

YueHaibing <yuehaibing@huawei.com>
    pinctrl: mediatek: moore: Fix build error

Pengcheng Yang <yangpc@wangsu.com>
    ipvs: correctly print the memory size of ip_vs_conn_tab

Adam Ford <aford173@gmail.com>
    ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35

Adam Ford <aford173@gmail.com>
    ARM: dts: am3517-evm: Fix misc pinmuxing

H. Nikolaus Schaller <hns@goldelico.com>
    ARM: dts: Fix mmc order for omap3-gta04

Miaoqian Lin <linmq006@gmail.com>
    phy: ti: Add missing pm_runtime_disable() in serdes_am654_probe

Miaoqian Lin <linmq006@gmail.com>
    phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe

Claudiu Beznea <claudiu.beznea@microchip.com>
    ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name

Mark Brown <broonie@kernel.org>
    ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek

Miaoqian Lin <linmq006@gmail.com>
    phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocks

Tony Lindgren <tony@atomide.com>
    bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific

Miaoqian Lin <linmq006@gmail.com>
    ARM: OMAP2+: Fix refcount leak in omap_gic_of_init

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    phy: samsung: exynos5250-sata: fix missing device put in probe error paths

Miaoqian Lin <linmq006@gmail.com>
    phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe

Fabio Estevam <festevam@gmail.com>
    ARM: dts: imx6qdl-apalis: Fix sgtl5000 detection issue

Weitao Wang <WeitaoWang-oc@zhaoxin.com>
    USB: Fix xhci event ring dequeue pointer ERDP update issue

Chuanhong Guo <gch981213@gmail.com>
    mtd: rawnand: fix ecc parameters for mt7622

Tong Zhang <ztong0001@gmail.com>
    iio:imu:bmi160: disable regulator in error path

Christian Hewitt <christianshewitt@gmail.com>
    arm64: dts: meson: remove CPU opps below 1GHz for SM1 boards

Christian Hewitt <christianshewitt@gmail.com>
    arm64: dts: meson: remove CPU opps below 1GHz for G12B boards

Pavel Skripkin <paskripkin@gmail.com>
    video: fbdev: udlfb: properly check endpoint type

Tejun Heo <tj@kernel.org>
    iocost: don't reset the inuse weight of under-weighted debtors

Thomas Gleixner <tglx@linutronix.de>
    x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests

Guo Ren <guoren@linux.alibaba.com>
    riscv: patch_text: Fixup last cpu should be master

Mikulas Patocka <mpatocka@redhat.com>
    hex2bin: fix access beyond string end

Mikulas Patocka <mpatocka@redhat.com>
    hex2bin: make the function hex_to_bin constant-time

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    pinctrl: samsung: fix missing GPIOLIB on ARM64 Exynos config

Wang Qing <wangqing@vivo.com>
    arch_topology: Do not set llc_sibling if llc_id is invalid

Maciej W. Rozycki <macro@orcam.me.uk>
    serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device

Maciej W. Rozycki <macro@orcam.me.uk>
    serial: 8250: Also set sticky MCR bits in console restoration

Johan Hovold <johan@kernel.org>
    serial: imx: fix overrun interrupts in DMA mode

Sean Anderson <sean.anderson@seco.com>
    usb: phy: generic: Get the vbus supply

Pawel Laszczak <pawell@cadence.com>
    usb: cdns3: Fix issue for clear halt endpoint

Thinh Nguyen <Thinh.Nguyen@synopsys.com>
    usb: dwc3: gadget: Return proper request status

Thinh Nguyen <Thinh.Nguyen@synopsys.com>
    usb: dwc3: core: Only handle soft-reset in DCTL

Thinh Nguyen <Thinh.Nguyen@synopsys.com>
    usb: dwc3: core: Fix tx/rx threshold settings

Sven Peter <sven@svenpeter.dev>
    usb: dwc3: Try usb-role-switch first in dwc3_drd_init

Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
    usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()

Dan Vacura <w36195@motorola.com>
    usb: gadget: uvc: Fix crash when encoding data for usb request

Heikki Krogerus <heikki.krogerus@linux.intel.com>
    usb: typec: ucsi: Fix role swapping

Heikki Krogerus <heikki.krogerus@linux.intel.com>
    usb: typec: ucsi: Fix reuse of completion structure

Hangyu Hua <hbh25y@gmail.com>
    usb: misc: fix improper handling of refcount in uss720_probe()

Fawzi Khaber <fawzi.khaber@tdk.com>
    iio: imu: inv_icm42600: Fix I2C init possible nack

Zheyu Ma <zheyuma97@gmail.com>
    iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on()

Michael Hennerich <michael.hennerich@analog.com>
    iio: dac: ad5446: Fix read_raw not returning set value

Zizhuang Deng <sunsetdzz@gmail.com>
    iio: dac: ad5592r: Fix the missing return value.

Mathias Nyman <mathias.nyman@linux.intel.com>
    xhci: increase usb U3 -> U0 link resume timeout from 100ms to 500ms

Henry Lin <henryl@nvidia.com>
    xhci: stop polling roothubs after shutdown

Evan Green <evgreen@chromium.org>
    xhci: Enable runtime PM on second Alderlake controller

Daniele Palmas <dnlplm@gmail.com>
    USB: serial: option: add Telit 0x1057, 0x1058, 0x1075 compositions

Slark Xiao <slark_xiao@163.com>
    USB: serial: option: add support for Cinterion MV32-WA/MV32-WB

Bruno Thomsen <bruno.thomsen@gmail.com>
    USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader

Kees Cook <keescook@chromium.org>
    USB: serial: whiteheat: fix heap overflow in WHITEHEAT_GET_DTR_RTS

Oliver Neukum <oneukum@suse.com>
    USB: quirks: add STRING quirk for VCOM device

Oliver Neukum <oneukum@suse.com>
    USB: quirks: add a Realtek card reader

Macpaul Lin <macpaul.lin@mediatek.com>
    usb: mtu3: fix USB 3.0 dual-role-switch from device to host

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    lightnvm: disable the subsystem

Willy Tarreau <w@1wt.eu>
    floppy: disable FDRAWCMD by default


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/boot/dts/am3517-evm.dts                   |  45 ++++-
 arch/arm/boot/dts/am3517-som.dtsi                  |   9 +
 arch/arm/boot/dts/at91-sama5d4_xplained.dts        |   4 +-
 arch/arm/boot/dts/at91sam9g20ek_common.dtsi        |   6 +
 arch/arm/boot/dts/imx6qdl-apalis.dtsi              |  10 +-
 arch/arm/boot/dts/imx6ull-colibri.dtsi             |   2 +-
 arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts   |  15 ++
 arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts   |  15 ++
 arch/arm/boot/dts/logicpd-som-lv.dtsi              |  15 --
 arch/arm/boot/dts/omap3-gta04.dtsi                 |   2 +
 arch/arm/mach-exynos/Kconfig                       |   1 -
 arch/arm/mach-omap2/omap4-common.c                 |   2 +
 arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi  |  40 -----
 arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi  |  40 -----
 arch/arm64/boot/dts/amlogic/meson-sm1.dtsi         |  20 ---
 arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts  |   4 +
 arch/powerpc/perf/Makefile                         |   4 +-
 arch/riscv/kernel/patch.c                          |   2 +-
 arch/x86/include/asm/microcode.h                   |   2 +
 arch/x86/kernel/cpu/microcode/core.c               |   6 +-
 arch/x86/lib/usercopy_64.c                         |   2 +-
 arch/x86/pci/xen.c                                 |   6 +-
 arch/x86/power/cpu.c                               |  10 +-
 block/blk-iocost.c                                 |  12 +-
 drivers/base/arch_topology.c                       |   2 +-
 drivers/block/Kconfig                              |  16 ++
 drivers/block/floppy.c                             |  43 +++--
 drivers/bus/sunxi-rsb.c                            |   2 +
 drivers/bus/ti-sysc.c                              |  16 +-
 drivers/clk/sunxi/clk-sun9i-mmc.c                  |   2 +
 drivers/cpufreq/sun50i-cpufreq-nvmem.c             |   4 +-
 .../gpu/drm/amd/amdkfd/kfd_device_queue_manager.c  |  83 ++++-----
 .../gpu/drm/amd/display/dc/dcn21/dcn21_resource.c  |   1 +
 drivers/gpu/drm/i915/i915_reg.h                    |   2 +-
 drivers/iio/dac/ad5446.c                           |   2 +-
 drivers/iio/dac/ad5592r-base.c                     |   2 +-
 drivers/iio/imu/bmi160/bmi160_core.c               |  20 ++-
 drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c    |  15 +-
 drivers/iio/magnetometer/ak8975.c                  |   1 +
 drivers/lightnvm/Kconfig                           |   2 +-
 drivers/memory/renesas-rpc-if.c                    |  60 +++++--
 drivers/mtd/nand/raw/mtk_ecc.c                     |  12 +-
 drivers/mtd/nand/raw/sh_flctl.c                    |  14 +-
 drivers/net/dsa/lantiq_gswip.c                     |   3 -
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c   |   9 +-
 drivers/net/ethernet/broadcom/genet/bcmgenet.c     |   7 +
 drivers/net/ethernet/freescale/fec_main.c          |   2 +-
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c |  31 ++--
 drivers/net/ethernet/ibm/ibmvnic.c                 | 144 +++++----------
 drivers/net/ethernet/ibm/ibmvnic.h                 |   6 -
 drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c     |   3 +-
 .../net/ethernet/stmicro/stmmac/dwmac-socfpga.c    |  12 +-
 drivers/net/hippi/rrunner.c                        |   2 +
 drivers/net/phy/marvell10g.c                       |   2 +-
 drivers/net/wireguard/device.c                     |   3 +-
 drivers/phy/motorola/phy-mapphone-mdm6600.c        |   3 +-
 drivers/phy/samsung/phy-exynos5250-sata.c          |  21 ++-
 drivers/phy/ti/phy-am654-serdes.c                  |   2 +-
 drivers/phy/ti/phy-omap-usb2.c                     |   2 +-
 drivers/pinctrl/mediatek/Kconfig                   |   1 +
 drivers/pinctrl/pinctrl-pistachio.c                |   6 +-
 drivers/pinctrl/pinctrl-rockchip.c                 |  45 +++--
 drivers/pinctrl/samsung/Kconfig                    |  11 +-
 drivers/pinctrl/stm32/pinctrl-stm32.c              |  23 ++-
 .../intel/int340x_thermal/int3400_thermal.c        |   4 +-
 drivers/tty/n_gsm.c                                | 194 +++++++++++----------
 drivers/tty/serial/8250/8250_pci.c                 |   8 +-
 drivers/tty/serial/8250/8250_port.c                |   2 +-
 drivers/tty/serial/imx.c                           |   2 +-
 drivers/usb/cdns3/gadget.c                         |   7 +-
 drivers/usb/core/quirks.c                          |   6 +
 drivers/usb/dwc3/core.c                            |  11 +-
 drivers/usb/dwc3/drd.c                             |  11 +-
 drivers/usb/dwc3/gadget.c                          |  31 +++-
 drivers/usb/gadget/configfs.c                      |   2 +
 drivers/usb/gadget/function/uvc_queue.c            |   2 +
 drivers/usb/host/xhci-hub.c                        |   2 +-
 drivers/usb/host/xhci-pci.c                        |   4 +-
 drivers/usb/host/xhci-ring.c                       |   2 +
 drivers/usb/host/xhci.c                            |  11 ++
 drivers/usb/misc/uss720.c                          |   3 +-
 drivers/usb/mtu3/mtu3_dr.c                         |   6 +-
 drivers/usb/phy/phy-generic.c                      |   7 +
 drivers/usb/serial/cp210x.c                        |   2 +
 drivers/usb/serial/option.c                        |  12 ++
 drivers/usb/serial/whiteheat.c                     |   5 +-
 drivers/usb/typec/ucsi/ucsi.c                      |  24 ++-
 drivers/video/fbdev/udlfb.c                        |  14 +-
 fs/cifs/smb2ops.c                                  |   8 +
 fs/ext4/super.c                                    |  15 +-
 fs/zonefs/super.c                                  |  46 ++++-
 include/linux/kernel.h                             |   2 +-
 include/linux/mtd/mtd.h                            |   6 +-
 include/memory/renesas-rpc-if.h                    |   1 +
 include/net/ip6_tunnel.h                           |   2 +-
 include/net/ip_tunnels.h                           |   2 +-
 include/net/tcp.h                                  |   8 +
 lib/hexdump.c                                      |  41 +++--
 mm/kasan/quarantine.c                              |   7 +
 net/core/lwt_bpf.c                                 |   7 +-
 net/dsa/port.c                                     |   2 +
 net/ipv4/ip_gre.c                                  |  12 +-
 net/ipv4/syncookies.c                              |   8 +-
 net/ipv4/tcp_input.c                               |  15 +-
 net/ipv4/tcp_minisocks.c                           |   2 +-
 net/ipv4/tcp_output.c                              |   1 +
 net/ipv4/tcp_rate.c                                |  11 +-
 net/ipv6/ip6_gre.c                                 |  16 +-
 net/ipv6/syncookies.c                              |   3 +-
 net/netfilter/ipvs/ip_vs_conn.c                    |   2 +-
 net/netfilter/nft_set_rbtree.c                     |   6 +-
 net/netfilter/nft_socket.c                         |  52 ++++--
 net/sctp/sm_sideeffect.c                           |   4 +
 net/smc/af_smc.c                                   |   2 +
 net/tls/tls_device.c                               |  12 +-
 sound/soc/codecs/wm8731.c                          |  19 +-
 sound/soc/intel/common/soc-acpi-intel-tgl-match.c  |   4 +-
 tools/perf/arch/arm64/util/Build                   |   1 -
 tools/perf/arch/arm64/util/machine.c               |  27 ---
 tools/perf/arch/s390/util/machine.c                |  16 --
 tools/perf/util/symbol-elf.c                       |   2 +-
 tools/perf/util/symbol.c                           |  37 ++--
 tools/perf/util/symbol.h                           |   3 +-
 124 files changed, 1008 insertions(+), 681 deletions(-)

[PATCH 5.10 001/129] floppy: disable FDRAWCMD by default

[Greg Kroah-Hartman]

From: Willy Tarreau <w@1wt.eu>

commit 233087ca063686964a53c829d547c7571e3f67bf upstream.

Minh Yuan reported a concurrency use-after-free issue in the floppy code
between raw_cmd_ioctl and seek_interrupt.

[ It turns out this has been around, and that others have reported the
  KASAN splats over the years, but Minh Yuan had a reproducer for it and
  so gets primary credit for reporting it for this fix   - Linus ]

The problem is, this driver tends to break very easily and nowadays,
nobody is expected to use FDRAWCMD anyway since it was used to
manipulate non-standard formats.  The risk of breaking the driver is
higher than the risk presented by this race, and accessing the device
requires privileges anyway.

Let's just add a config option to completely disable this ioctl and
leave it disabled by default.  Distros shouldn't use it, and only those
running on antique hardware might need to enable it.

Link: https://lore.kernel.org/all/000000000000b71cdd05d703f6bf@google.com/
Link: https://lore.kernel.org/lkml/CAKcFiNC=MfYVW-Jt9A3=FPJpTwCD2PL_ULNCpsCVE5s8ZeBQgQ@mail.gmail.com
Link: https://lore.kernel.org/all/CAEAjamu1FRhz6StCe_55XY5s389ZP_xmCF69k987En+1z53=eg@mail.gmail.com
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Reported-by: syzbot+8e8958586909d62b6840@syzkaller.appspotmail.com
Reported-by: cruise k <cruise4k@gmail.com>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Tested-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/Kconfig  |   16 ++++++++++++++++
 drivers/block/floppy.c |   43 ++++++++++++++++++++++++++++++++-----------
 2 files changed, 48 insertions(+), 11 deletions(-)

--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -39,6 +39,22 @@ config BLK_DEV_FD
 	  To compile this driver as a module, choose M here: the
 	  module will be called floppy.
 
+config BLK_DEV_FD_RAWCMD
+	bool "Support for raw floppy disk commands (DEPRECATED)"
+	depends on BLK_DEV_FD
+	help
+	  If you want to use actual physical floppies and expect to do
+	  special low-level hardware accesses to them (access and use
+	  non-standard formats, for example), then enable this.
+
+	  Note that the code enabled by this option is rarely used and
+	  might be unstable or insecure, and distros should not enable it.
+
+	  Note: FDRAWCMD is deprecated and will be removed from the kernel
+	  in the near future.
+
+	  If unsure, say N.
+
 config AMIGA_FLOPPY
 	tristate "Amiga floppy support"
 	depends on AMIGA
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -3069,6 +3069,8 @@ static const char *drive_name(int type,
 		return "(null)";
 }
 
+#ifdef CONFIG_BLK_DEV_FD_RAWCMD
+
 /* raw commands */
 static void raw_cmd_done(int flag)
 {
@@ -3273,6 +3275,35 @@ static int raw_cmd_ioctl(int cmd, void _
 	return ret;
 }
 
+static int floppy_raw_cmd_ioctl(int type, int drive, int cmd,
+				void __user *param)
+{
+	int ret;
+
+	pr_warn_once("Note: FDRAWCMD is deprecated and will be removed from the kernel in the near future.\n");
+
+	if (type)
+		return -EINVAL;
+	if (lock_fdc(drive))
+		return -EINTR;
+	set_floppy(drive);
+	ret = raw_cmd_ioctl(cmd, param);
+	if (ret == -EINTR)
+		return -EINTR;
+	process_fd_request();
+	return ret;
+}
+
+#else /* CONFIG_BLK_DEV_FD_RAWCMD */
+
+static int floppy_raw_cmd_ioctl(int type, int drive, int cmd,
+				void __user *param)
+{
+	return -EOPNOTSUPP;
+}
+
+#endif
+
 static int invalidate_drive(struct block_device *bdev)
 {
 	/* invalidate the buffer track to force a reread */
@@ -3461,7 +3492,6 @@ static int fd_locked_ioctl(struct block_
 {
 	int drive = (long)bdev->bd_disk->private_data;
 	int type = ITYPE(drive_state[drive].fd_device);
-	int i;
 	int ret;
 	int size;
 	union inparam {
@@ -3612,16 +3642,7 @@ static int fd_locked_ioctl(struct block_
 		outparam = &write_errors[drive];
 		break;
 	case FDRAWCMD:
-		if (type)
-			return -EINVAL;
-		if (lock_fdc(drive))
-			return -EINTR;
-		set_floppy(drive);
-		i = raw_cmd_ioctl(cmd, (void __user *)param);
-		if (i == -EINTR)
-			return -EINTR;
-		process_fd_request();
-		return i;
+		return floppy_raw_cmd_ioctl(type, drive, cmd, (void __user *)param);
 	case FDTWADDLE:
 		if (lock_fdc(drive))
 			return -EINTR;

[PATCH 5.10 002/129] lightnvm: disable the subsystem

[Greg Kroah-Hartman]

In commit 9ea9b9c48387 ("remove the lightnvm subsystem") the lightnvm
subsystem was removed as there is no hardware in the wild for it, and
the code is known to have problems.  This should also be disabled for
older LTS kernels as well to prevent anyone from accidentally using it.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Matias Bjørling <mb@lightnvm.io>
Cc: Javier González <javier@javigon.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/lightnvm/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/lightnvm/Kconfig
+++ b/drivers/lightnvm/Kconfig
@@ -5,7 +5,7 @@
 
 menuconfig NVM
 	bool "Open-Channel SSD target support"
-	depends on BLOCK
+	depends on BLOCK && BROKEN
 	help
 	  Say Y here to get to enable Open-channel SSDs.
 

[PATCH 5.10 003/129] usb: mtu3: fix USB 3.0 dual-role-switch from device to host

[Greg Kroah-Hartman]

From: Macpaul Lin <macpaul.lin@mediatek.com>

commit 456244aeecd54249096362a173dfe06b82a5cafa upstream.

Issue description:
  When an OTG port has been switched to device role and then switch back
  to host role again, the USB 3.0 Host (XHCI) will not be able to detect
  "plug in event of a connected USB 2.0/1.0 ((Highspeed and Fullspeed)
  devices until system reboot.

Root cause and Solution:
  There is a condition checking flag "ssusb->otg_switch.is_u3_drd" in
  toggle_opstate(). At the end of role switch procedure, toggle_opstate()
  will be called to set DC_SESSION and SOFT_CONN bit. If "is_u3_drd" was
  set and switched the role to USB host 3.0, bit DC_SESSION and SOFT_CONN
  will be skipped hence caused the port cannot detect connected USB 2.0
  (Highspeed and Fullspeed) devices. Simply remove the condition check to
  solve this issue.

Fixes: d0ed062a8b75 ("usb: mtu3: dual-role mode support")
Cc: stable@vger.kernel.org
Tested-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Tainping Fang <tianping.fang@mediatek.com>
Link: https://lore.kernel.org/r/20220419081245.21015-1-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/mtu3/mtu3_dr.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/usb/mtu3/mtu3_dr.c
+++ b/drivers/usb/mtu3/mtu3_dr.c
@@ -41,10 +41,8 @@ static char *mailbox_state_string(enum m
 
 static void toggle_opstate(struct ssusb_mtk *ssusb)
 {
-	if (!ssusb->otg_switch.is_u3_drd) {
-		mtu3_setbits(ssusb->mac_base, U3D_DEVICE_CONTROL, DC_SESSION);
-		mtu3_setbits(ssusb->mac_base, U3D_POWER_MANAGEMENT, SOFT_CONN);
-	}
+	mtu3_setbits(ssusb->mac_base, U3D_DEVICE_CONTROL, DC_SESSION);
+	mtu3_setbits(ssusb->mac_base, U3D_POWER_MANAGEMENT, SOFT_CONN);
 }
 
 /* only port0 supports dual-role mode */

[PATCH 5.10 004/129] USB: quirks: add a Realtek card reader

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit 2a7ccf6bb6f147f64c025ad68f4255d8e1e0ce6d upstream.

This device is reported to stall when enummerated.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220414110209.30924-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/quirks.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -404,6 +404,9 @@ static const struct usb_device_id usb_qu
 	{ USB_DEVICE(0x0b05, 0x17e0), .driver_info =
 			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
 
+	/* Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)*/
+	{ USB_DEVICE(0x0bda, 0x0151), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS },
+
 	/* Realtek hub in Dell WD19 (Type-C) */
 	{ USB_DEVICE(0x0bda, 0x0487), .driver_info = USB_QUIRK_NO_LPM },
 	{ USB_DEVICE(0x0bda, 0x5487), .driver_info = USB_QUIRK_RESET_RESUME },

[PATCH 5.10 005/129] USB: quirks: add STRING quirk for VCOM device

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit ec547af8a9ea6441864bad34172676b5652ceb96 upstream.

This has been reported to stall if queried

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220414123152.1700-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/quirks.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -511,6 +511,9 @@ static const struct usb_device_id usb_qu
 	/* DJI CineSSD */
 	{ USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
 
+	/* VCOM device */
+	{ USB_DEVICE(0x4296, 0x7570), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS },
+
 	/* INTEL VALUE SSD */
 	{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
 

[PATCH 5.10 006/129] USB: serial: whiteheat: fix heap overflow in WHITEHEAT_GET_DTR_RTS

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

commit e23e50e7acc8d8f16498e9c129db33e6a00e80eb upstream.

The sizeof(struct whitehat_dr_info) can be 4 bytes under CONFIG_AEABI=n
due to "-mabi=apcs-gnu", even though it has a single u8:

whiteheat_private {
        __u8                       mcr;                  /*     0     1 */

        /* size: 4, cachelines: 1, members: 1 */
        /* padding: 3 */
        /* last cacheline: 4 bytes */
};

The result is technically harmless, as both the source and the
destinations are currently the same allocation size (4 bytes) and don't
use their padding, but if anything were to ever be added after the
"mcr" member in "struct whiteheat_private", it would be overwritten. The
structs both have a single u8 "mcr" member, but are 4 bytes in padded
size. The memcpy() destination was explicitly targeting the u8 member
(size 1) with the length of the whole structure (size 4), triggering
the memcpy buffer overflow warning:

In file included from include/linux/string.h:253,
                 from include/linux/bitmap.h:11,
                 from include/linux/cpumask.h:12,
                 from include/linux/smp.h:13,
                 from include/linux/lockdep.h:14,
                 from include/linux/spinlock.h:62,
                 from include/linux/mmzone.h:8,
                 from include/linux/gfp.h:6,
                 from include/linux/slab.h:15,
                 from drivers/usb/serial/whiteheat.c:17:
In function 'fortify_memcpy_chk',
    inlined from 'firm_send_command' at drivers/usb/serial/whiteheat.c:587:4:
include/linux/fortify-string.h:328:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
  328 |                         __write_overflow_field(p_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Instead, just assign the one byte directly.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202204142318.vDqjjSFn-lkp@intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220421001234.2421107-1-keescook@chromium.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/whiteheat.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -599,9 +599,8 @@ static int firm_send_command(struct usb_
 		switch (command) {
 		case WHITEHEAT_GET_DTR_RTS:
 			info = usb_get_serial_port_data(port);
-			memcpy(&info->mcr, command_info->result_buffer,
-					sizeof(struct whiteheat_dr_info));
-				break;
+			info->mcr = command_info->result_buffer[0];
+			break;
 		}
 	}
 exit:

[PATCH 5.10 007/129] USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader

[Greg Kroah-Hartman]

From: Bruno Thomsen <bruno.thomsen@gmail.com>

commit 35a923a0b329c343e9e81d79518e2937eba06fcd upstream.

Wireless reading of water and heat meters using 868 MHz wM-Bus mode C1.

The two different product IDs allow detection of dongle antenna
solution:
- Internal antenna
- External antenna using SMA connector

https://www.kamstrup.com/en-en/water-solutions/water-meter-reading/usb-meter-reader

Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20220414081202.5591-1-bruno.thomsen@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/cp210x.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -198,6 +198,8 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
 	{ USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
 	{ USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
+	{ USB_DEVICE(0x17A8, 0x0101) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Int Ant) */
+	{ USB_DEVICE(0x17A8, 0x0102) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Ext Ant) */
 	{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
 	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */

[PATCH 5.10 008/129] USB: serial: option: add support for Cinterion MV32-WA/MV32-WB

[Greg Kroah-Hartman]

From: Slark Xiao <slark_xiao@163.com>

commit b4a64ed6e7b857317070fcb9d87ff5d4a73be3e8 upstream.

Add support for Cinterion device MV32-WA/MV32-WB. MV32-WA PID is
0x00F1, and MV32-WB PID is 0x00F2.

Test evidence as below:
T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=1e2d ProdID=00f1 Rev=05.04
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00F1 USB Mobile Broadband
S:  SerialNumber=78ada8c4
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  3 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=1e2d ProdID=00f2 Rev=05.04
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00F2 USB Mobile Broadband
S:  SerialNumber=cdd06a78
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

Interface 0&1: MBIM, 2:Modem, 3: GNSS, 4: NMEA, 5: Diag
GNSS port don't use serial driver.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20220414074434.5699-1-slark_xiao@163.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -432,6 +432,8 @@ static void option_instat_callback(struc
 #define CINTERION_PRODUCT_CLS8			0x00b0
 #define CINTERION_PRODUCT_MV31_MBIM		0x00b3
 #define CINTERION_PRODUCT_MV31_RMNET		0x00b7
+#define CINTERION_PRODUCT_MV32_WA		0x00f1
+#define CINTERION_PRODUCT_MV32_WB		0x00f2
 
 /* Olivetti products */
 #define OLIVETTI_VENDOR_ID			0x0b3c
@@ -1969,6 +1971,10 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(3)},
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_RMNET, 0xff),
 	  .driver_info = RSVD(0)},
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA, 0xff),
+	  .driver_info = RSVD(3)},
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB, 0xff),
+	  .driver_info = RSVD(3)},
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100),
 	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120),

[PATCH 5.10 009/129] USB: serial: option: add Telit 0x1057, 0x1058, 0x1075 compositions

[Greg Kroah-Hartman]

From: Daniele Palmas <dnlplm@gmail.com>

commit f32c5a0423400e01f4d7c607949fa3a1f006e8fa upstream.

Add support for the following Telit FN980 and FN990 compositions:

0x1057: tty, adb, rmnet, tty, tty, tty, tty, tty
0x1058: tty, adb, tty, tty, tty, tty, tty
0x1075: adb, tty

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20220406141408.580669-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1219,6 +1219,10 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1056, 0xff),	/* Telit FD980 */
 	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1057, 0xff),	/* Telit FN980 */
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1058, 0xff),	/* Telit FN980 (PCIe) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1060, 0xff),	/* Telit LN920 (rmnet) */
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1061, 0xff),	/* Telit LN920 (MBIM) */
@@ -1235,6 +1239,8 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1073, 0xff),	/* Telit FN990 (ECM) */
 	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff),	/* Telit FN990 (PCIe) */
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),

[PATCH 5.10 010/129] xhci: Enable runtime PM on second Alderlake controller

[Greg Kroah-Hartman]

From: Evan Green <evgreen@chromium.org>

commit d8bfe5091d6cc4b8b8395e4666979ae72a6069ca upstream.

Alderlake has two XHCI controllers with PCI IDs 0x461e and 0x51ed. We
had previously added the quirk to default enable runtime PM for 0x461e,
now add it for 0x51ed as well.

Signed-off-by: Evan Green <evgreen@chromium.org>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220408114225.1.Ibcff6b86ed4eacfe4c4bc89c90e18416f3900a3e@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-pci.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -59,6 +59,7 @@
 #define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI		0x9a13
 #define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI		0x1138
 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI		0x461e
+#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI	0x51ed
 
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4			0x43b9
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_3			0x43ba
@@ -261,7 +262,8 @@ static void xhci_pci_quirks(struct devic
 	     pdev->device == PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI ||
 	     pdev->device == PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI ||
 	     pdev->device == PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI ||
-	     pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI))
+	     pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI))
 		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
 
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&

[PATCH 5.10 011/129] xhci: stop polling roothubs after shutdown

[Greg Kroah-Hartman]

From: Henry Lin <henryl@nvidia.com>

commit dc92944a014cd6a6f6c94299aaa36164dd2c238a upstream.

While rebooting, XHCI controller and its bus device will be shut down
in order by .shutdown callback. Stopping roothubs polling in
xhci_shutdown() can prevent XHCI driver from accessing port status
after its bus device shutdown.

Take PCIe XHCI controller as example, if XHCI driver doesn't stop roothubs
polling, XHCI driver may access PCIe BAR register for port status after
parent PCIe root port driver is shutdown and cause PCIe bus error.

[check shared hcd exist before stopping its roothub polling -Mathias]

Cc: stable@vger.kernel.org
Signed-off-by: Henry Lin <henryl@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220408134823.2527272-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -779,6 +779,17 @@ void xhci_shutdown(struct usb_hcd *hcd)
 	if (xhci->quirks & XHCI_SPURIOUS_REBOOT)
 		usb_disable_xhci_ports(to_pci_dev(hcd->self.sysdev));
 
+	/* Don't poll the roothubs after shutdown. */
+	xhci_dbg(xhci, "%s: stopping usb%d port polling.\n",
+			__func__, hcd->self.busnum);
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	del_timer_sync(&hcd->rh_timer);
+
+	if (xhci->shared_hcd) {
+		clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+		del_timer_sync(&xhci->shared_hcd->rh_timer);
+	}
+
 	spin_lock_irq(&xhci->lock);
 	xhci_halt(xhci);
 	/* Workaround for spurious wakeups at shutdown with HSW */

[PATCH 5.10 012/129] xhci: increase usb U3 -> U0 link resume timeout from 100ms to 500ms

[Greg Kroah-Hartman]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit 33597f0c48be0836854d43c577e35c8f8a765a7d upstream.

The first U3 wake signal by the host may be lost if the USB 3 connection is
tunneled over USB4, with a runtime suspended USB4 host, and firmware
implemented connection manager.

Specs state the host must wait 100ms (tU3WakeupRetryDelay) before
resending a U3 wake signal if device doesn't respond, leading to U3 -> U0
link transition times around 270ms in the tunneled case.

Fixes: 0200b9f790b0 ("xhci: Wait until link state trainsits to U0 after setting USB_SS_PORT_LS_U0")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220408134823.2527272-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-hub.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1348,7 +1348,7 @@ int xhci_hub_control(struct usb_hcd *hcd
 				}
 				spin_unlock_irqrestore(&xhci->lock, flags);
 				if (!wait_for_completion_timeout(&bus_state->u3exit_done[wIndex],
-								 msecs_to_jiffies(100)))
+								 msecs_to_jiffies(500)))
 					xhci_dbg(xhci, "missing U0 port change event for port %d-%d\n",
 						 hcd->self.busnum, wIndex + 1);
 				spin_lock_irqsave(&xhci->lock, flags);

[PATCH 5.10 013/129] iio: dac: ad5592r: Fix the missing return value.

[Greg Kroah-Hartman]

From: Zizhuang Deng <sunsetdzz@gmail.com>

commit b55b38f7cc12da3b9ef36e7a3b7f8f96737df4d5 upstream.

The third call to `fwnode_property_read_u32` did not record
the return value, resulting in `channel_offstate` possibly
being assigned the wrong value.

Fixes: 56ca9db862bf ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs")
Signed-off-by: Zizhuang Deng <sunsetdzz@gmail.com>
Link: https://lore.kernel.org/r/20220310125450.4164164-1-sunsetdzz@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/dac/ad5592r-base.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/dac/ad5592r-base.c
+++ b/drivers/iio/dac/ad5592r-base.c
@@ -523,7 +523,7 @@ static int ad5592r_alloc_channels(struct
 		if (!ret)
 			st->channel_modes[reg] = tmp;
 
-		fwnode_property_read_u32(child, "adi,off-state", &tmp);
+		ret = fwnode_property_read_u32(child, "adi,off-state", &tmp);
 		if (!ret)
 			st->channel_offstate[reg] = tmp;
 	}

[PATCH 5.10 014/129] iio: dac: ad5446: Fix read_raw not returning set value

[Greg Kroah-Hartman]

From: Michael Hennerich <michael.hennerich@analog.com>

commit 89a01cd688d3c0ac983ef0b0e5f40018ab768317 upstream.

read_raw should return the un-scaled value.

Fixes: 5e06bdfb46e8b ("staging:iio:dac:ad5446: Return cached value for 'raw' attribute")
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220406105620.1171340-1-michael.hennerich@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/dac/ad5446.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/dac/ad5446.c
+++ b/drivers/iio/dac/ad5446.c
@@ -178,7 +178,7 @@ static int ad5446_read_raw(struct iio_de
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
-		*val = st->cached_val;
+		*val = st->cached_val >> chan->scan_type.shift;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
 		*val = st->vref_mv;

[PATCH 5.10 015/129] iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on()

[Greg Kroah-Hartman]

From: Zheyu Ma <zheyuma97@gmail.com>

commit 3a26787dacf04257a68b16315c984eb2c340bc5e upstream.

When the driver fails to enable the regulator 'vid', we will get the
following splat:

[   79.955610] WARNING: CPU: 5 PID: 441 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[   79.959641] RIP: 0010:_regulator_put+0x3ec/0x4e0
[   79.967570] Call Trace:
[   79.967773]  <TASK>
[   79.967951]  regulator_put+0x1f/0x30
[   79.968254]  devres_release_group+0x319/0x3d0
[   79.968608]  i2c_device_probe+0x766/0x940

Fix this by disabling the 'vdd' regulator when failing to enable 'vid'
regulator.

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220409034849.3717231-2-zheyuma97@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/magnetometer/ak8975.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/iio/magnetometer/ak8975.c
+++ b/drivers/iio/magnetometer/ak8975.c
@@ -389,6 +389,7 @@ static int ak8975_power_on(const struct
 	if (ret) {
 		dev_warn(&data->client->dev,
 			 "Failed to enable specified Vid supply\n");
+		regulator_disable(data->vdd);
 		return ret;
 	}
 

[PATCH 5.10 016/129] iio: imu: inv_icm42600: Fix I2C init possible nack

[Greg Kroah-Hartman]

From: Fawzi Khaber <fawzi.khaber@tdk.com>

commit b5d6ba09b10d2ccb865ed9bc45941db0a41c6756 upstream.

This register write to REG_INTF_CONFIG6 enables a spike filter that
is impacting the line and can prevent the I2C ACK to be seen by the
controller. So we don't test the return value.

Fixes: 7297ef1e261672b8 ("iio: imu: inv_icm42600: add I2C driver")
Signed-off-by: Fawzi Khaber <fawzi.khaber@tdk.com>
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20220411111533.5826-1-jmaneyrol@invensense.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
@@ -18,12 +18,15 @@ static int inv_icm42600_i2c_bus_setup(st
 	unsigned int mask, val;
 	int ret;
 
-	/* setup interface registers */
-	ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG6,
-				 INV_ICM42600_INTF_CONFIG6_MASK,
-				 INV_ICM42600_INTF_CONFIG6_I3C_EN);
-	if (ret)
-		return ret;
+	/*
+	 * setup interface registers
+	 * This register write to REG_INTF_CONFIG6 enables a spike filter that
+	 * is impacting the line and can prevent the I2C ACK to be seen by the
+	 * controller. So we don't test the return value.
+	 */
+	regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG6,
+			   INV_ICM42600_INTF_CONFIG6_MASK,
+			   INV_ICM42600_INTF_CONFIG6_I3C_EN);
 
 	ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG4,
 				 INV_ICM42600_INTF_CONFIG4_I3C_BUS_ONLY, 0);

[PATCH 5.10 017/129] usb: misc: fix improper handling of refcount in uss720_probe()

[Greg Kroah-Hartman]

From: Hangyu Hua <hbh25y@gmail.com>

commit 0a96fa640dc928da9eaa46a22c46521b037b78ad upstream.

usb_put_dev shouldn't be called when uss720_probe succeeds because of
priv->usbdev. At the same time, priv->usbdev shouldn't be set to NULL
before destroy_priv in uss720_disconnect because usb_put_dev is in
destroy_priv.

Fix this by moving priv->usbdev = NULL after usb_put_dev.

Fixes: dcb4b8ad6a44 ("misc/uss720: fix memory leak in uss720_probe")
Cc: stable <stable@kernel.org>
Reviewed-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220407024001.11761-1-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/uss720.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -71,6 +71,7 @@ static void destroy_priv(struct kref *kr
 
 	dev_dbg(&priv->usbdev->dev, "destroying priv datastructure\n");
 	usb_put_dev(priv->usbdev);
+	priv->usbdev = NULL;
 	kfree(priv);
 }
 
@@ -736,7 +737,6 @@ static int uss720_probe(struct usb_inter
 	parport_announce_port(pp);
 
 	usb_set_intfdata(intf, pp);
-	usb_put_dev(usbdev);
 	return 0;
 
 probe_abort:
@@ -754,7 +754,6 @@ static void uss720_disconnect(struct usb
 	usb_set_intfdata(intf, NULL);
 	if (pp) {
 		priv = pp->private_data;
-		priv->usbdev = NULL;
 		priv->pp = NULL;
 		dev_dbg(&intf->dev, "parport_remove_port\n");
 		parport_remove_port(pp);

[PATCH 5.10 018/129] usb: typec: ucsi: Fix reuse of completion structure

[Greg Kroah-Hartman]

From: Heikki Krogerus <heikki.krogerus@linux.intel.com>

commit e25adcca917d7e4cdc1dc6444d0692ffda7594bf upstream.

The role swapping completion variable is reused, so it needs
to be reinitialised every time. Otherwise it will be marked
as done after the first time it's used and completing
immediately.

Link: https://lore.kernel.org/linux-usb/20220325203959.GA19752@jackp-linux.qualcomm.com/
Fixes: 6df475f804e6 ("usb: typec: ucsi: Start using struct typec_operations")
Cc: stable@vger.kernel.org
Reported-and-suggested-by: Jack Pham <quic_jackp@quicinc.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220405134824.68067-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/ucsi/ucsi.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -928,6 +928,8 @@ static int ucsi_dr_swap(struct typec_por
 	     role == TYPEC_HOST))
 		goto out_unlock;
 
+	reinit_completion(&con->complete);
+
 	command = UCSI_SET_UOR | UCSI_CONNECTOR_NUMBER(con->num);
 	command |= UCSI_SET_UOR_ROLE(role);
 	command |= UCSI_SET_UOR_ACCEPT_ROLE_SWAPS;
@@ -964,6 +966,8 @@ static int ucsi_pr_swap(struct typec_por
 	if (cur_role == role)
 		goto out_unlock;
 
+	reinit_completion(&con->complete);
+
 	command = UCSI_SET_PDR | UCSI_CONNECTOR_NUMBER(con->num);
 	command |= UCSI_SET_PDR_ROLE(role);
 	command |= UCSI_SET_PDR_ACCEPT_ROLE_SWAPS;

[PATCH 5.10 019/129] usb: typec: ucsi: Fix role swapping

[Greg Kroah-Hartman]

From: Heikki Krogerus <heikki.krogerus@linux.intel.com>

commit eb5d7ff3cf0d55093c619b5ad107cd5c05ce8134 upstream.

All attempts to swap the roles timed out because the
completion was done without releasing the port lock. Fixing
that by releasing the lock before starting to wait for the
completion.

Link: https://lore.kernel.org/linux-usb/037de7ac-e210-bdf5-ec7a-8c0c88a0be20@gmail.com/
Fixes: ad74b8649bea ("usb: typec: ucsi: Preliminary support for alternate modes")
Cc: stable@vger.kernel.org
Reported-and-tested-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220405134824.68067-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/ucsi/ucsi.c |   20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -937,14 +937,18 @@ static int ucsi_dr_swap(struct typec_por
 	if (ret < 0)
 		goto out_unlock;
 
+	mutex_unlock(&con->lock);
+
 	if (!wait_for_completion_timeout(&con->complete,
-					msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS)))
-		ret = -ETIMEDOUT;
+					 msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS)))
+		return -ETIMEDOUT;
+
+	return 0;
 
 out_unlock:
 	mutex_unlock(&con->lock);
 
-	return ret < 0 ? ret : 0;
+	return ret;
 }
 
 static int ucsi_pr_swap(struct typec_port *port, enum typec_role role)
@@ -975,11 +979,13 @@ static int ucsi_pr_swap(struct typec_por
 	if (ret < 0)
 		goto out_unlock;
 
+	mutex_unlock(&con->lock);
+
 	if (!wait_for_completion_timeout(&con->complete,
-				msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS))) {
-		ret = -ETIMEDOUT;
-		goto out_unlock;
-	}
+					 msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS)))
+		return -ETIMEDOUT;
+
+	mutex_lock(&con->lock);
 
 	/* Something has gone wrong while swapping the role */
 	if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) !=

[PATCH 5.10 020/129] usb: gadget: uvc: Fix crash when encoding data for usb request

[Greg Kroah-Hartman]

From: Dan Vacura <w36195@motorola.com>

commit 71d471e3faf90c9674cadc7605ac719e82cb7fac upstream.

During the uvcg_video_pump() process, if an error occurs and
uvcg_queue_cancel() is called, the buffer queue will be cleared out, but
the current marker (queue->buf_used) of the active buffer (no longer
active) is not reset. On the next iteration of uvcg_video_pump() the
stale buf_used count will be used and the logic of min((unsigned
int)len, buf->bytesused - queue->buf_used) may incorrectly calculate a
nbytes size, causing an invalid memory access.

[80802.185460][  T315] configfs-gadget gadget: uvc: VS request completed
with status -18.
[80802.185519][  T315] configfs-gadget gadget: uvc: VS request completed
with status -18.
...
uvcg_queue_cancel() is called and the queue is cleared out, but the
marker queue->buf_used is not reset.
...
[80802.262328][ T8682] Unable to handle kernel paging request at virtual
address ffffffc03af9f000
...
...
[80802.263138][ T8682] Call trace:
[80802.263146][ T8682]  __memcpy+0x12c/0x180
[80802.263155][ T8682]  uvcg_video_pump+0xcc/0x1e0
[80802.263165][ T8682]  process_one_work+0x2cc/0x568
[80802.263173][ T8682]  worker_thread+0x28c/0x518
[80802.263181][ T8682]  kthread+0x160/0x170
[80802.263188][ T8682]  ret_from_fork+0x10/0x18
[80802.263198][ T8682] Code: a8c12829 a88130cb a8c130

Fixes: d692522577c0 ("usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20220331184024.23918-1-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/uvc_queue.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/gadget/function/uvc_queue.c
+++ b/drivers/usb/gadget/function/uvc_queue.c
@@ -242,6 +242,8 @@ void uvcg_queue_cancel(struct uvc_video_
 		buf->state = UVC_BUF_STATE_ERROR;
 		vb2_buffer_done(&buf->buf.vb2_buf, VB2_BUF_STATE_ERROR);
 	}
+	queue->buf_used = 0;
+
 	/* This must be protected by the irqlock spinlock to avoid race
 	 * conditions between uvc_queue_buffer and the disconnection event that
 	 * could result in an interruptible wait in uvc_dequeue_buffer. Do not

[PATCH 5.10 021/129] usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()

[Greg Kroah-Hartman]

From: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>

commit bf95c4d4630c7a2c16e7b424fdea5177d9ce0864 upstream.

If any function like UVC is deactivating gadget as part of composition
switch which results in not calling pullup enablement, it is not getting
enabled after switch to new composition due to this deactivation flag
not cleared. This results in USB enumeration not happening after switch
to new USB composition. Hence clear deactivation flag inside gadget
structure in configfs_composite_unbind() before switch to new USB
composition.

Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Signed-off-by: Dan Vacura <w36195@motorola.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220413211038.72797-1-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/configfs.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -1443,6 +1443,8 @@ static void configfs_composite_unbind(st
 	usb_ep_autoconfig_reset(cdev->gadget);
 	spin_lock_irqsave(&gi->spinlock, flags);
 	cdev->gadget = NULL;
+	cdev->deactivations = 0;
+	gadget->deactivated = false;
 	set_gadget_data(gadget, NULL);
 	spin_unlock_irqrestore(&gi->spinlock, flags);
 }

[PATCH 5.10 022/129] usb: dwc3: Try usb-role-switch first in dwc3_drd_init

[Greg Kroah-Hartman]

From: Sven Peter <sven@svenpeter.dev>

commit ab7aa2866d295438dc60522f85c5421c6b4f1507 upstream.

If the PHY controller node has a "port" dwc3 tries to find an
extcon device even when "usb-role-switch" is present. This happens
because dwc3_get_extcon() sees that "port" node and then calls
extcon_find_edev_by_node() which will always return EPROBE_DEFER
in that case.

On the other hand, even if an extcon was present and dwc3_get_extcon()
was successful it would still be ignored in favor of "usb-role-switch".

Let's just first check if "usb-role-switch" is configured in the device
tree and directly use it instead and only try to look for an extcon
device otherwise.

Fixes: 8a0a13799744 ("usb: dwc3: Registering a role switch in the DRD code.")
Cc: stable <stable@kernel.org>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20220411155300.9766-1-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/drd.c |   11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -568,16 +568,15 @@ int dwc3_drd_init(struct dwc3 *dwc)
 {
 	int ret, irq;
 
+	if (ROLE_SWITCH &&
+	    device_property_read_bool(dwc->dev, "usb-role-switch"))
+		return dwc3_setup_role_switch(dwc);
+
 	dwc->edev = dwc3_get_extcon(dwc);
 	if (IS_ERR(dwc->edev))
 		return PTR_ERR(dwc->edev);
 
-	if (ROLE_SWITCH &&
-	    device_property_read_bool(dwc->dev, "usb-role-switch")) {
-		ret = dwc3_setup_role_switch(dwc);
-		if (ret < 0)
-			return ret;
-	} else if (dwc->edev) {
+	if (dwc->edev) {
 		dwc->edev_nb.notifier_call = dwc3_drd_notifier;
 		ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
 					       &dwc->edev_nb);

[PATCH 5.10 023/129] usb: dwc3: core: Fix tx/rx threshold settings

[Greg Kroah-Hartman]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

commit f28ad9069363dec7deb88032b70612755eed9ee6 upstream.

The current driver logic checks against 0 to determine whether the
periodic tx/rx threshold settings are set, but we may get bogus values
from uninitialized variables if no device property is set. Properly
default these variables to 0.

Fixes: 938a5ad1d305 ("usb: dwc3: Check for ESS TX/RX threshold config")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/cccfce990b11b730b0dae42f9d217dc6fb988c90.1649727139.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/core.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1277,10 +1277,10 @@ static void dwc3_get_properties(struct d
 	u8			lpm_nyet_threshold;
 	u8			tx_de_emphasis;
 	u8			hird_threshold;
-	u8			rx_thr_num_pkt_prd;
-	u8			rx_max_burst_prd;
-	u8			tx_thr_num_pkt_prd;
-	u8			tx_max_burst_prd;
+	u8			rx_thr_num_pkt_prd = 0;
+	u8			rx_max_burst_prd = 0;
+	u8			tx_thr_num_pkt_prd = 0;
+	u8			tx_max_burst_prd = 0;
 
 	/* default to highest possible threshold */
 	lpm_nyet_threshold = 0xf;

[PATCH 5.10 024/129] usb: dwc3: core: Only handle soft-reset in DCTL

[Greg Kroah-Hartman]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

commit f4fd84ae0765a80494b28c43b756a95100351a94 upstream.

Make sure not to set run_stop bit or link state change request while
initiating soft-reset. Register read-modify-write operation may
unintentionally start the controller before the initialization completes
with its previous DCTL value, which can cause initialization failure.

Fixes: f59dcab17629 ("usb: dwc3: core: improve reset sequence")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/6aecbd78328f102003d40ccf18ceeebd411d3703.1650594792.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/core.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -275,7 +275,8 @@ static int dwc3_core_soft_reset(struct d
 
 	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 	reg |= DWC3_DCTL_CSFTRST;
-	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+	reg &= ~DWC3_DCTL_RUN_STOP;
+	dwc3_gadget_dctl_write_safe(dwc, reg);
 
 	/*
 	 * For DWC_usb31 controller 1.90a and later, the DCTL.CSFRST bit

[PATCH 5.10 025/129] usb: dwc3: gadget: Return proper request status

[Greg Kroah-Hartman]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

commit c7428dbddcf4ea1919e1c8e15f715b94ca359268 upstream.

If the user sets the usb_request's no_interrupt, then there will be no
completion event for the request. Currently the driver incorrectly uses
the event status of a different request to report the status for a
request with no_interrupt. The dwc3 driver needs to check the TRB status
associated with the request when reporting its status.

Note: this is only applicable to missed_isoc TRB completion status, but
the other status are also listed for completeness/documentation.

Fixes: 6d8a019614f3 ("usb: dwc3: gadget: check for Missed Isoc from event status")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/db2c80108286cfd108adb05bad52138b78d7c3a7.1650673655.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/gadget.c |   31 ++++++++++++++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)

--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2859,6 +2859,7 @@ static int dwc3_gadget_ep_cleanup_comple
 		const struct dwc3_event_depevt *event,
 		struct dwc3_request *req, int status)
 {
+	int request_status;
 	int ret;
 
 	if (req->request.num_mapped_sgs)
@@ -2879,7 +2880,35 @@ static int dwc3_gadget_ep_cleanup_comple
 		req->needs_extra_trb = false;
 	}
 
-	dwc3_gadget_giveback(dep, req, status);
+	/*
+	 * The event status only reflects the status of the TRB with IOC set.
+	 * For the requests that don't set interrupt on completion, the driver
+	 * needs to check and return the status of the completed TRBs associated
+	 * with the request. Use the status of the last TRB of the request.
+	 */
+	if (req->request.no_interrupt) {
+		struct dwc3_trb *trb;
+
+		trb = dwc3_ep_prev_trb(dep, dep->trb_dequeue);
+		switch (DWC3_TRB_SIZE_TRBSTS(trb->size)) {
+		case DWC3_TRBSTS_MISSED_ISOC:
+			/* Isoc endpoint only */
+			request_status = -EXDEV;
+			break;
+		case DWC3_TRB_STS_XFER_IN_PROG:
+			/* Applicable when End Transfer with ForceRM=0 */
+		case DWC3_TRBSTS_SETUP_PENDING:
+			/* Control endpoint only */
+		case DWC3_TRBSTS_OK:
+		default:
+			request_status = 0;
+			break;
+		}
+	} else {
+		request_status = status;
+	}
+
+	dwc3_gadget_giveback(dep, req, request_status);
 
 out:
 	return ret;

[PATCH 5.10 026/129] usb: cdns3: Fix issue for clear halt endpoint

[Greg Kroah-Hartman]

From: Pawel Laszczak <pawell@cadence.com>

commit b3fa25de31fb7e9afebe9599b8ff32eda13d7c94 upstream.

Path fixes bug which occurs during resetting endpoint in
__cdns3_gadget_ep_clear_halt function. During resetting endpoint
controller will change HW/DMA owned TRB. It set Abort flag in
trb->control and will change trb->length field. If driver want
to use the aborted trb it must update the changed field in
TRB.

Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
cc: <stable@vger.kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20220329084605.4022-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/cdns3/gadget.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/usb/cdns3/gadget.c
+++ b/drivers/usb/cdns3/gadget.c
@@ -2697,6 +2697,7 @@ int __cdns3_gadget_ep_clear_halt(struct
 	struct usb_request *request;
 	struct cdns3_request *priv_req;
 	struct cdns3_trb *trb = NULL;
+	struct cdns3_trb trb_tmp;
 	int ret;
 	int val;
 
@@ -2706,8 +2707,10 @@ int __cdns3_gadget_ep_clear_halt(struct
 	if (request) {
 		priv_req = to_cdns3_request(request);
 		trb = priv_req->trb;
-		if (trb)
+		if (trb) {
+			trb_tmp = *trb;
 			trb->control = trb->control ^ cpu_to_le32(TRB_CYCLE);
+		}
 	}
 
 	writel(EP_CMD_CSTALL | EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
@@ -2722,7 +2725,7 @@ int __cdns3_gadget_ep_clear_halt(struct
 
 	if (request) {
 		if (trb)
-			trb->control = trb->control ^ cpu_to_le32(TRB_CYCLE);
+			*trb = trb_tmp;
 
 		cdns3_rearm_transfer(priv_ep, 1);
 	}

[PATCH 5.10 027/129] usb: phy: generic: Get the vbus supply

[Greg Kroah-Hartman]

From: Sean Anderson <sean.anderson@seco.com>

commit 03e607cbb2931374db1825f371e9c7f28526d3f4 upstream.

While support for working with a vbus was added, the regulator was never
actually gotten (despite what was documented). Fix this by actually
getting the supply from the device tree.

Fixes: 7acc9973e3c4 ("usb: phy: generic: add vbus support")
Cc: stable <stable@kernel.org>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20220425171412.1188485-3-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/phy/phy-generic.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -268,6 +268,13 @@ int usb_phy_gen_create_phy(struct device
 			return -EPROBE_DEFER;
 	}
 
+	nop->vbus_draw = devm_regulator_get_exclusive(dev, "vbus");
+	if (PTR_ERR(nop->vbus_draw) == -ENODEV)
+		nop->vbus_draw = NULL;
+	if (IS_ERR(nop->vbus_draw))
+		return dev_err_probe(dev, PTR_ERR(nop->vbus_draw),
+				     "could not get vbus regulator\n");
+
 	nop->dev		= dev;
 	nop->phy.dev		= nop->dev;
 	nop->phy.label		= "nop-xceiv";

[PATCH 5.10 028/129] serial: imx: fix overrun interrupts in DMA mode

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 3ee82c6e41f3d2212647ce0bc5a05a0f69097824 upstream.

Commit 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is
off") accidentally enabled overrun interrupts unconditionally when
deferring DMA enable until after the receiver has been enabled during
startup.

Fix this by using the DMA-initialised instead of DMA-enabled flag to
determine whether overrun interrupts should be enabled.

Note that overrun interrupts are already accounted for in
imx_uart_clear_rx_errors() when using DMA since commit 41d98b5da92f
("serial: imx-serial - update RX error counters when DMA is used").

Fixes: 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is off")
Cc: stable@vger.kernel.org      # 4.17
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220411081957.7846-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/imx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1470,7 +1470,7 @@ static int imx_uart_startup(struct uart_
 	imx_uart_writel(sport, ucr1, UCR1);
 
 	ucr4 = imx_uart_readl(sport, UCR4) & ~(UCR4_OREN | UCR4_INVR);
-	if (!sport->dma_is_enabled)
+	if (!dma_is_inited)
 		ucr4 |= UCR4_OREN;
 	if (sport->inverted_rx)
 		ucr4 |= UCR4_INVR;

[PATCH 5.10 029/129] serial: 8250: Also set sticky MCR bits in console restoration

[Greg Kroah-Hartman]

From: Maciej W. Rozycki <macro@orcam.me.uk>

commit 6e6eebdf5e2455f089ccd000754a0deaeb79af82 upstream.

Sticky MCR bits are lost in console restoration if console suspending
has been disabled.  This currently affects the AFE bit, which works in
combination with RTS which we set, so we want to make sure the UART
retains control of its FIFO where previously requested.  Also specific
drivers may need other bits in the future.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 4516d50aabed ("serial: 8250: Use canary to restart console after suspend")
Cc: stable@vger.kernel.org # v4.0+
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181518490.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_port.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -3311,7 +3311,7 @@ static void serial8250_console_restore(s
 
 	serial8250_set_divisor(port, baud, quot, frac);
 	serial_port_out(port, UART_LCR, up->lcr);
-	serial8250_out_MCR(up, UART_MCR_DTR | UART_MCR_RTS);
+	serial8250_out_MCR(up, up->mcr | UART_MCR_DTR | UART_MCR_RTS);
 }
 
 /*

[PATCH 5.10 030/129] serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device

[Greg Kroah-Hartman]

From: Maciej W. Rozycki <macro@orcam.me.uk>

commit 637674fa40059cddcc3ad2212728965072f62ea3 upstream.

The EndRun PTP/1588 dual serial port device is based on the Oxford
Semiconductor OXPCIe952 UART device with the PCI vendor:device ID set
for EndRun Technologies and is therefore driven by a fixed 62.5MHz clock
input derived from the 100MHz PCI Express clock.  The clock rate is
divided by the oversampling rate of 16 as it is supplied to the baud
rate generator, yielding the baud base of 3906250.

Replace the incorrect baud base of 4000000 with the right value of
3906250 then, complementing commit 6cbe45d8ac93 ("serial: 8250: Correct
the clock for OxSemi PCIe devices").

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable <stable@kernel.org>
Fixes: 1bc8cde46a159 ("8250_pci: Added driver for Endrun Technologies PTP PCIe card.")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181515270.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_pci.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2940,7 +2940,7 @@ enum pci_board_num_t {
 	pbn_panacom2,
 	pbn_panacom4,
 	pbn_plx_romulus,
-	pbn_endrun_2_4000000,
+	pbn_endrun_2_3906250,
 	pbn_oxsemi,
 	pbn_oxsemi_1_4000000,
 	pbn_oxsemi_2_4000000,
@@ -3468,10 +3468,10 @@ static struct pciserial_board pci_boards
 	* signal now many ports are available
 	* 2 port 952 Uart support
 	*/
-	[pbn_endrun_2_4000000] = {
+	[pbn_endrun_2_3906250] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 2,
-		.base_baud	= 4000000,
+		.base_baud	= 3906250,
 		.uart_offset	= 0x200,
 		.first_offset	= 0x1000,
 	},
@@ -4386,7 +4386,7 @@ static const struct pci_device_id serial
 	*/
 	{	PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_endrun_2_4000000 },
+		pbn_endrun_2_3906250 },
 	/*
 	 * Quatech cards. These actually have configurable clocks but for
 	 * now we just use the default.

[PATCH 5.10 031/129] arch_topology: Do not set llc_sibling if llc_id is invalid

[Greg Kroah-Hartman]

From: Wang Qing <wangqing@vivo.com>

commit 1dc9f1a66e1718479e1c4f95514e1750602a3cb9 upstream.

When ACPI is not enabled, cpuid_topo->llc_id = cpu_topo->llc_id = -1, which
will set llc_sibling 0xff(...), this is misleading.

Don't set llc_sibling(default 0) if we don't know the cache topology.

Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Wang Qing <wangqing@vivo.com>
Fixes: 37c3ec2d810f ("arm64: topology: divorce MC scheduling domain from core_siblings")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1649644580-54626-1-git-send-email-wangqing@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/base/arch_topology.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/base/arch_topology.c
+++ b/drivers/base/arch_topology.c
@@ -515,7 +515,7 @@ void update_siblings_masks(unsigned int
 	for_each_online_cpu(cpu) {
 		cpu_topo = &cpu_topology[cpu];
 
-		if (cpuid_topo->llc_id == cpu_topo->llc_id) {
+		if (cpu_topo->llc_id != -1 && cpuid_topo->llc_id == cpu_topo->llc_id) {
 			cpumask_set_cpu(cpu, &cpuid_topo->llc_sibling);
 			cpumask_set_cpu(cpuid, &cpu_topo->llc_sibling);
 		}

[PATCH 5.10 032/129] pinctrl: samsung: fix missing GPIOLIB on ARM64 Exynos config

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

commit ac875df4d854ab13d9c4af682a1837a1214fecec upstream.

The Samsung pinctrl drivers depend on OF_GPIO, which is part of GPIOLIB.
ARMv7 Exynos platform selects GPIOLIB and Samsung pinctrl drivers. ARMv8
Exynos selects only the latter leading to possible wrong configuration
on ARMv8 build:

  WARNING: unmet direct dependencies detected for PINCTRL_EXYNOS
    Depends on [n]: PINCTRL [=y] && OF_GPIO [=n] && (ARCH_EXYNOS [=y] || ARCH_S5PV210 || COMPILE_TEST [=y])
    Selected by [y]:
    - ARCH_EXYNOS [=y]

Always select the GPIOLIB from the Samsung pinctrl drivers to fix the
issue.  This requires removing of OF_GPIO dependency (to avoid recursive
dependency), so add dependency on OF for COMPILE_TEST cases.

Reported-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Fixes: eed6b3eb20b9 ("arm64: Split out platform options to separate Kconfig")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220420141407.470955-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mach-exynos/Kconfig    |    1 -
 drivers/pinctrl/samsung/Kconfig |   11 ++++-------
 2 files changed, 4 insertions(+), 8 deletions(-)

--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -20,7 +20,6 @@ menuconfig ARCH_EXYNOS
 	select EXYNOS_PMU
 	select EXYNOS_SROM
 	select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
-	select GPIOLIB
 	select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5
 	select HAVE_ARM_SCU if SMP
 	select HAVE_S3C2410_I2C if I2C
--- a/drivers/pinctrl/samsung/Kconfig
+++ b/drivers/pinctrl/samsung/Kconfig
@@ -4,14 +4,13 @@
 #
 config PINCTRL_SAMSUNG
 	bool
-	depends on OF_GPIO
+	select GPIOLIB
 	select PINMUX
 	select PINCONF
 
 config PINCTRL_EXYNOS
 	bool "Pinctrl common driver part for Samsung Exynos SoCs"
-	depends on OF_GPIO
-	depends on ARCH_EXYNOS || ARCH_S5PV210 || COMPILE_TEST
+	depends on ARCH_EXYNOS || ARCH_S5PV210 || (COMPILE_TEST && OF)
 	select PINCTRL_SAMSUNG
 	select PINCTRL_EXYNOS_ARM if ARM && (ARCH_EXYNOS || ARCH_S5PV210)
 	select PINCTRL_EXYNOS_ARM64 if ARM64 && ARCH_EXYNOS
@@ -26,12 +25,10 @@ config PINCTRL_EXYNOS_ARM64
 
 config PINCTRL_S3C24XX
 	bool "Samsung S3C24XX SoC pinctrl driver"
-	depends on OF_GPIO
-	depends on ARCH_S3C24XX || COMPILE_TEST
+	depends on ARCH_S3C24XX || (COMPILE_TEST && OF)
 	select PINCTRL_SAMSUNG
 
 config PINCTRL_S3C64XX
 	bool "Samsung S3C64XX SoC pinctrl driver"
-	depends on OF_GPIO
-	depends on ARCH_S3C64XX || COMPILE_TEST
+	depends on ARCH_S3C64XX || (COMPILE_TEST && OF)
 	select PINCTRL_SAMSUNG

[PATCH 5.10 033/129] hex2bin: make the function hex_to_bin constant-time

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

commit e5be15767e7e284351853cbaba80cde8620341fb upstream.

The function hex2bin is used to load cryptographic keys into device
mapper targets dm-crypt and dm-integrity.  It should take constant time
independent on the processed data, so that concurrently running
unprivileged code can't infer any information about the keys via
microarchitectural convert channels.

This patch changes the function hex_to_bin so that it contains no
branches and no memory accesses.

Note that this shouldn't cause performance degradation because the size
of the new function is the same as the size of the old function (on
x86-64) - and the new function causes no branch misprediction penalties.

I compile-tested this function with gcc on aarch64 alpha arm hppa hppa64
i386 ia64 m68k mips32 mips64 powerpc powerpc64 riscv sh4 s390x sparc32
sparc64 x86_64 and with clang on aarch64 arm hexagon i386 mips32 mips64
powerpc powerpc64 s390x sparc32 sparc64 x86_64 to verify that there are
no branches in the generated code.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/kernel.h |    2 +-
 lib/hexdump.c          |   32 +++++++++++++++++++++++++-------
 2 files changed, 26 insertions(+), 8 deletions(-)

--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -635,7 +635,7 @@ static inline char *hex_byte_pack_upper(
 	return buf;
 }
 
-extern int hex_to_bin(char ch);
+extern int hex_to_bin(unsigned char ch);
 extern int __must_check hex2bin(u8 *dst, const char *src, size_t count);
 extern char *bin2hex(char *dst, const void *src, size_t count);
 
--- a/lib/hexdump.c
+++ b/lib/hexdump.c
@@ -22,15 +22,33 @@ EXPORT_SYMBOL(hex_asc_upper);
  *
  * hex_to_bin() converts one hex digit to its actual value or -1 in case of bad
  * input.
+ *
+ * This function is used to load cryptographic keys, so it is coded in such a
+ * way that there are no conditions or memory accesses that depend on data.
+ *
+ * Explanation of the logic:
+ * (ch - '9' - 1) is negative if ch <= '9'
+ * ('0' - 1 - ch) is negative if ch >= '0'
+ * we "and" these two values, so the result is negative if ch is in the range
+ *	'0' ... '9'
+ * we are only interested in the sign, so we do a shift ">> 8"; note that right
+ *	shift of a negative value is implementation-defined, so we cast the
+ *	value to (unsigned) before the shift --- we have 0xffffff if ch is in
+ *	the range '0' ... '9', 0 otherwise
+ * we "and" this value with (ch - '0' + 1) --- we have a value 1 ... 10 if ch is
+ *	in the range '0' ... '9', 0 otherwise
+ * we add this value to -1 --- we have a value 0 ... 9 if ch is in the range '0'
+ *	... '9', -1 otherwise
+ * the next line is similar to the previous one, but we need to decode both
+ *	uppercase and lowercase letters, so we use (ch & 0xdf), which converts
+ *	lowercase to uppercase
  */
-int hex_to_bin(char ch)
+int hex_to_bin(unsigned char ch)
 {
-	if ((ch >= '0') && (ch <= '9'))
-		return ch - '0';
-	ch = tolower(ch);
-	if ((ch >= 'a') && (ch <= 'f'))
-		return ch - 'a' + 10;
-	return -1;
+	unsigned char cu = ch & 0xdf;
+	return -1 +
+		((ch - '0' +  1) & (unsigned)((ch - '9' - 1) & ('0' - 1 - ch)) >> 8) +
+		((cu - 'A' + 11) & (unsigned)((cu - 'F' - 1) & ('A' - 1 - cu)) >> 8);
 }
 EXPORT_SYMBOL(hex_to_bin);
 

[PATCH 5.10 034/129] hex2bin: fix access beyond string end

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

commit e4d8a29997731b3bb14059024b24df9f784288d0 upstream.

If we pass too short string to "hex2bin" (and the string size without
the terminating NUL character is even), "hex2bin" reads one byte after
the terminating NUL character.  This patch fixes it.

Note that hex_to_bin returns -1 on error and hex2bin return -EINVAL on
error - so we can't just return the variable "hi" or "lo" on error.
This inconsistency may be fixed in the next merge window, but for the
purpose of fixing this bug, we just preserve the existing behavior and
return -1 and -EINVAL.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Fixes: b78049831ffe ("lib: add error checking to hex2bin")
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 lib/hexdump.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/lib/hexdump.c
+++ b/lib/hexdump.c
@@ -63,10 +63,13 @@ EXPORT_SYMBOL(hex_to_bin);
 int hex2bin(u8 *dst, const char *src, size_t count)
 {
 	while (count--) {
-		int hi = hex_to_bin(*src++);
-		int lo = hex_to_bin(*src++);
+		int hi, lo;
 
-		if ((hi < 0) || (lo < 0))
+		hi = hex_to_bin(*src++);
+		if (unlikely(hi < 0))
+			return -EINVAL;
+		lo = hex_to_bin(*src++);
+		if (unlikely(lo < 0))
 			return -EINVAL;
 
 		*dst++ = (hi << 4) | lo;

[PATCH 5.10 035/129] riscv: patch_text: Fixup last cpu should be master

[Greg Kroah-Hartman]

From: Guo Ren <guoren@linux.alibaba.com>

commit 8ec1442953c66a1d8462cccd8c20b7ba561f5915 upstream.

These patch_text implementations are using stop_machine_cpuslocked
infrastructure with atomic cpu_count. The original idea: When the
master CPU patch_text, the others should wait for it. But current
implementation is using the first CPU as master, which couldn't
guarantee the remaining CPUs are waiting. This patch changes the
last CPU as the master to solve the potential risk.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 043cb41a85de ("riscv: introduce interfaces to patch kernel code")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/riscv/kernel/patch.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/riscv/kernel/patch.c
+++ b/arch/riscv/kernel/patch.c
@@ -100,7 +100,7 @@ static int patch_text_cb(void *data)
 	struct patch_insn *patch = data;
 	int ret = 0;
 
-	if (atomic_inc_return(&patch->cpu_count) == 1) {
+	if (atomic_inc_return(&patch->cpu_count) == num_online_cpus()) {
 		ret =
 		    patch_text_nosync(patch->addr, &patch->insn,
 					    GET_INSN_LENGTH(patch->insn));

[PATCH 5.10 036/129] x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests

[Greg Kroah-Hartman]

From: Thomas Gleixner <tglx@linutronix.de>

commit 7e0815b3e09986d2fe651199363e135b9358132a upstream.

When a XEN_HVM guest uses the XEN PIRQ/Eventchannel mechanism, then
PCI/MSI[-X] masking is solely controlled by the hypervisor, but contrary to
XEN_PV guests this does not disable PCI/MSI[-X] masking in the PCI/MSI
layer.

This can lead to a situation where the PCI/MSI layer masks an MSI[-X]
interrupt and the hypervisor grants the write despite the fact that it
already requested the interrupt. As a consequence interrupt delivery on the
affected device is not happening ever.

Set pci_msi_ignore_mask to prevent that like it's done for XEN_PV guests
already.

Fixes: 809f9267bbab ("xen: map MSIs into pirqs")
Reported-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Reported-by: Dusty Mabe <dustymabe@redhat.com>
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Noah Meyerhans <noahm@debian.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87tuaduxj5.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/pci/xen.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -476,7 +476,6 @@ static __init void xen_setup_pci_msi(voi
 			xen_msi_ops.setup_msi_irqs = xen_setup_msi_irqs;
 		}
 		xen_msi_ops.teardown_msi_irqs = xen_pv_teardown_msi_irqs;
-		pci_msi_ignore_mask = 1;
 	} else if (xen_hvm_domain()) {
 		xen_msi_ops.setup_msi_irqs = xen_hvm_setup_msi_irqs;
 		xen_msi_ops.teardown_msi_irqs = xen_teardown_msi_irqs;
@@ -490,6 +489,11 @@ static __init void xen_setup_pci_msi(voi
 	 * in allocating the native domain and never use it.
 	 */
 	x86_init.irqs.create_pci_msi_domain = xen_create_pci_msi_domain;
+	/*
+	 * With XEN PIRQ/Eventchannels in use PCI/MSI[-X] masking is solely
+	 * controlled by the hypervisor.
+	 */
+	pci_msi_ignore_mask = 1;
 }
 
 #else /* CONFIG_PCI_MSI */

[PATCH 5.10 037/129] iocost: dont reset the inuse weight of under-weighted debtors

[Greg Kroah-Hartman]

From: Tejun Heo <tj@kernel.org>

commit 8c936f9ea11ec4e35e288810a7503b5c841a355f upstream.

When an iocg is in debt, its inuse weight is owned by debt handling and
should stay at 1. This invariant was broken when determining the amount of
surpluses at the beginning of donation calculation - when an iocg's
hierarchical weight is too low, the iocg is excluded from donation
calculation and its inuse is reset to its active regardless of its
indebtedness, triggering warnings like the following:

 WARNING: CPU: 5 PID: 0 at block/blk-iocost.c:1416 iocg_kick_waitq+0x392/0x3a0
 ...
 RIP: 0010:iocg_kick_waitq+0x392/0x3a0
 Code: 00 00 be ff ff ff ff 48 89 4d a8 e8 98 b2 70 00 48 8b 4d a8 85 c0 0f 85 4a fe ff ff 0f 0b e9 43 fe ff ff 0f 0b e9 4d fe ff ff <0f> 0b e9 50 fe ff ff e8 a2 ae 70 00 66 90 0f 1f 44 00 00 55 48 89
 RSP: 0018:ffffc90000200d08 EFLAGS: 00010016
 ...
  <IRQ>
  ioc_timer_fn+0x2e0/0x1470
  call_timer_fn+0xa1/0x2c0
 ...

As this happens only when an iocg's hierarchical weight is negligible, its
impact likely is limited to triggering the warnings. Fix it by skipping
resetting inuse of under-weighted debtors.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Rik van Riel <riel@surriel.com>
Fixes: c421a3eb2e27 ("blk-iocost: revamp debt handling")
Cc: stable@vger.kernel.org # v5.10+
Link: https://lore.kernel.org/r/YmjODd4aif9BzFuO@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 block/blk-iocost.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/block/blk-iocost.c
+++ b/block/blk-iocost.c
@@ -2257,7 +2257,17 @@ static void ioc_timer_fn(struct timer_li
 				iocg->hweight_donating = hwa;
 				iocg->hweight_after_donation = new_hwi;
 				list_add(&iocg->surplus_list, &surpluses);
-			} else {
+			} else if (!iocg->abs_vdebt) {
+				/*
+				 * @iocg doesn't have enough to donate. Reset
+				 * its inuse to active.
+				 *
+				 * Don't reset debtors as their inuse's are
+				 * owned by debt handling. This shouldn't affect
+				 * donation calculuation in any meaningful way
+				 * as @iocg doesn't have a meaningful amount of
+				 * share anyway.
+				 */
 				TRACE_IOCG_PATH(inuse_shortage, iocg, &now,
 						iocg->inuse, iocg->active,
 						iocg->hweight_inuse, new_hwi);

[PATCH 5.10 038/129] video: fbdev: udlfb: properly check endpoint type

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit aaf7dbe07385e0b8deb7237eca2a79926bbc7091 ]

syzbot reported warning in usb_submit_urb, which is caused by wrong
endpoint type.

This driver uses out bulk endpoint for communication, so
let's check if this endpoint is present and bail out early if not.

Fail log:

usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 4822 at drivers/usb/core/urb.c:493 usb_submit_urb+0xd27/0x1540 drivers/usb/core/urb.c:493
Modules linked in:
CPU: 0 PID: 4822 Comm: kworker/0:3 Tainted: G        W         5.13.0-syzkaller #0
...
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xd27/0x1540 drivers/usb/core/urb.c:493
...
Call Trace:
 dlfb_submit_urb+0x89/0x160 drivers/video/fbdev/udlfb.c:1969
 dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315
 dlfb_ops_set_par+0x2a3/0x840 drivers/video/fbdev/udlfb.c:1110
 dlfb_usb_probe.cold+0x113e/0x1f4a drivers/video/fbdev/udlfb.c:1732
 usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396

Fixes: 88e58b1a42f8 ("Staging: add udlfb driver")
Reported-and-tested-by: syzbot+53ce4a4246d0fe0fee34@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/udlfb.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c
index 90f48b71fd8f..d9eec1b60e66 100644
--- a/drivers/video/fbdev/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
@@ -1649,8 +1649,9 @@ static int dlfb_usb_probe(struct usb_interface *intf,
 	const struct device_attribute *attr;
 	struct dlfb_data *dlfb;
 	struct fb_info *info;
-	int retval = -ENOMEM;
+	int retval;
 	struct usb_device *usbdev = interface_to_usbdev(intf);
+	struct usb_endpoint_descriptor *out;
 
 	/* usb initialization */
 	dlfb = kzalloc(sizeof(*dlfb), GFP_KERNEL);
@@ -1664,6 +1665,12 @@ static int dlfb_usb_probe(struct usb_interface *intf,
 	dlfb->udev = usb_get_dev(usbdev);
 	usb_set_intfdata(intf, dlfb);
 
+	retval = usb_find_common_endpoints(intf->cur_altsetting, NULL, &out, NULL, NULL);
+	if (retval) {
+		dev_err(&intf->dev, "Device should have at lease 1 bulk endpoint!\n");
+		goto error;
+	}
+
 	dev_dbg(&intf->dev, "console enable=%d\n", console);
 	dev_dbg(&intf->dev, "fb_defio enable=%d\n", fb_defio);
 	dev_dbg(&intf->dev, "shadow enable=%d\n", shadow);
@@ -1673,6 +1680,7 @@ static int dlfb_usb_probe(struct usb_interface *intf,
 	if (!dlfb_parse_vendor_descriptor(dlfb, intf)) {
 		dev_err(&intf->dev,
 			"firmware not recognized, incompatible device?\n");
+		retval = -ENODEV;
 		goto error;
 	}
 
@@ -1686,8 +1694,10 @@ static int dlfb_usb_probe(struct usb_interface *intf,
 
 	/* allocates framebuffer driver structure, not framebuffer memory */
 	info = framebuffer_alloc(0, &dlfb->udev->dev);
-	if (!info)
+	if (!info) {
+		retval = -ENOMEM;
 		goto error;
+	}
 
 	dlfb->info = info;
 	info->par = dlfb;
-- 
2.35.1

[PATCH 5.10 039/129] arm64: dts: meson: remove CPU opps below 1GHz for G12B boards

[Greg Kroah-Hartman]

From: Christian Hewitt <christianshewitt@gmail.com>

[ Upstream commit 6c4d636bc00dc17c63ffb2a73a0da850240e26e3 ]

Amlogic G12B devices experience CPU stalls and random board wedges when
the system idles and CPU cores clock down to lower opp points. Recent
vendor kernels include a change to remove 100-250MHz and other distro
sources also remove the 500/667MHz points. Unless all 100-667Mhz opps
are removed or the CPU governor forced to performance stalls are still
observed, so let's remove them to improve stability and uptime.

Fixes: b96d4e92709b ("arm64: dts: meson-g12b: support a311d and s922x cpu operating points")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220210100638.19130-2-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../boot/dts/amlogic/meson-g12b-a311d.dtsi    | 40 -------------------
 .../boot/dts/amlogic/meson-g12b-s922x.dtsi    | 40 -------------------
 2 files changed, 80 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
index d61f43052a34..8e9ad1e51d66 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
@@ -11,26 +11,6 @@ cpu_opp_table_0: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <761000>;
@@ -71,26 +51,6 @@ cpub_opp_table_1: opp-table-1 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
index 1e5d0ee5d541..44c23c984034 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
@@ -11,26 +11,6 @@ cpu_opp_table_0: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
@@ -76,26 +56,6 @@ cpub_opp_table_1: opp-table-1 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <751000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <771000>;
-- 
2.35.1

[PATCH 5.10 040/129] arm64: dts: meson: remove CPU opps below 1GHz for SM1 boards

[Greg Kroah-Hartman]

From: Christian Hewitt <christianshewitt@gmail.com>

[ Upstream commit fd86d85401c2049f652293877c0f7e6e5afc3bbc ]

Amlogic SM1 devices experience CPU stalls and random board wedges when
the system idles and CPU cores clock down to lower opp points. Recent
vendor kernels include a change to remove 100-250MHz and other distro
sources also remove the 500/667MHz points. Unless all 100-667Mhz opps
are removed or the CPU governor forced to performance stalls are still
observed, so let's remove them to improve stability and uptime.

Fixes: 3d9e76483049 ("arm64: dts: meson-sm1-sei610: enable DVFS")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220210100638.19130-3-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 20 --------------------
 1 file changed, 20 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index c309517abae3..defe0b8d4d27 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -95,26 +95,6 @@ cpu_opp_table: opp-table {
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <730000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <730000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <730000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <666666666>;
-			opp-microvolt = <750000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <770000>;
-- 
2.35.1

[PATCH 5.10 041/129] iio:imu:bmi160: disable regulator in error path

[Greg Kroah-Hartman]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit d926054d5565d3cfa2c7c3f7a48e79bcc10453ed ]

Regulator should be disabled in error path as mentioned in _regulator_put().
Also disable accel if gyro cannot be enabled.

[   16.233604] WARNING: CPU: 0 PID: 2177 at drivers/regulator/core.c:2257 _regulator_put
[   16.240453] Call Trace:
[   16.240572]  <TASK>
[   16.240676]  regulator_put+0x26/0x40
[   16.240853]  regulator_bulk_free+0x26/0x50
[   16.241050]  release_nodes+0x3f/0x70
[   16.241225]  devres_release_group+0x147/0x1c0
[   16.241441]  ? bmi160_core_probe+0x175/0x3a0 [bmi160_core]

Fixes: 5dea3fb066f0 ("iio: imu: bmi160: added regulator support")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20220327154005.806049-1-ztong0001@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/imu/bmi160/bmi160_core.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c
index 82f03a4dc47a..5fd61889f593 100644
--- a/drivers/iio/imu/bmi160/bmi160_core.c
+++ b/drivers/iio/imu/bmi160/bmi160_core.c
@@ -731,7 +731,7 @@ static int bmi160_chip_init(struct bmi160_data *data, bool use_spi)
 
 	ret = regmap_write(data->regmap, BMI160_REG_CMD, BMI160_CMD_SOFTRESET);
 	if (ret)
-		return ret;
+		goto disable_regulator;
 
 	usleep_range(BMI160_SOFTRESET_USLEEP, BMI160_SOFTRESET_USLEEP + 1);
 
@@ -742,29 +742,37 @@ static int bmi160_chip_init(struct bmi160_data *data, bool use_spi)
 	if (use_spi) {
 		ret = regmap_read(data->regmap, BMI160_REG_DUMMY, &val);
 		if (ret)
-			return ret;
+			goto disable_regulator;
 	}
 
 	ret = regmap_read(data->regmap, BMI160_REG_CHIP_ID, &val);
 	if (ret) {
 		dev_err(dev, "Error reading chip id\n");
-		return ret;
+		goto disable_regulator;
 	}
 	if (val != BMI160_CHIP_ID_VAL) {
 		dev_err(dev, "Wrong chip id, got %x expected %x\n",
 			val, BMI160_CHIP_ID_VAL);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto disable_regulator;
 	}
 
 	ret = bmi160_set_mode(data, BMI160_ACCEL, true);
 	if (ret)
-		return ret;
+		goto disable_regulator;
 
 	ret = bmi160_set_mode(data, BMI160_GYRO, true);
 	if (ret)
-		return ret;
+		goto disable_accel;
 
 	return 0;
+
+disable_accel:
+	bmi160_set_mode(data, BMI160_ACCEL, false);
+
+disable_regulator:
+	regulator_bulk_disable(ARRAY_SIZE(data->supplies), data->supplies);
+	return ret;
 }
 
 static int bmi160_data_rdy_trigger_set_state(struct iio_trigger *trig,
-- 
2.35.1

[PATCH 5.10 042/129] mtd: rawnand: fix ecc parameters for mt7622

[Greg Kroah-Hartman]

From: Chuanhong Guo <gch981213@gmail.com>

[ Upstream commit 9fe4e0d3cbfe90152137963cc024ecb63db6e8e6 ]

According to the datasheet, mt7622 only has 5 ECC capabilities instead
of 7, and the decoding error register is arranged  as follows:
+------+---------+---------+---------+---------+
| Bits |  19:15  |  14:10  |   9:5   |   4:0   |
+------+---------+---------+---------+---------+
| Name | ERRNUM3 | ERRNUM2 | ERRNUM1 | ERRNUM0 |
+------+---------+---------+---------+---------+
This means err_mask should be 0x1f instead of 0x3f and the number of
bits shifted in mtk_ecc_get_stats should be 5 instead of 8.

This commit introduces err_shift for the difference in this register
and fix other existing parameters.

Public MT7622 reference manual can be found on [0] and the info this
commit is based on is from page 656 and page 660.

[0]: https://wiki.banana-pi.org/Banana_Pi_BPI-R64#Documents

Fixes: 98dea8d71931 ("mtd: nand: mtk: Support MT7622 NAND flash controller.")
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220402160315.919094-1-gch981213@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/nand/raw/mtk_ecc.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/raw/mtk_ecc.c b/drivers/mtd/nand/raw/mtk_ecc.c
index 75f1fa3d4d35..c115e03ede88 100644
--- a/drivers/mtd/nand/raw/mtk_ecc.c
+++ b/drivers/mtd/nand/raw/mtk_ecc.c
@@ -43,6 +43,7 @@
 
 struct mtk_ecc_caps {
 	u32 err_mask;
+	u32 err_shift;
 	const u8 *ecc_strength;
 	const u32 *ecc_regs;
 	u8 num_ecc_strength;
@@ -76,7 +77,7 @@ static const u8 ecc_strength_mt2712[] = {
 };
 
 static const u8 ecc_strength_mt7622[] = {
-	4, 6, 8, 10, 12, 14, 16
+	4, 6, 8, 10, 12
 };
 
 enum mtk_ecc_regs {
@@ -221,7 +222,7 @@ void mtk_ecc_get_stats(struct mtk_ecc *ecc, struct mtk_ecc_stats *stats,
 	for (i = 0; i < sectors; i++) {
 		offset = (i >> 2) << 2;
 		err = readl(ecc->regs + ECC_DECENUM0 + offset);
-		err = err >> ((i % 4) * 8);
+		err = err >> ((i % 4) * ecc->caps->err_shift);
 		err &= ecc->caps->err_mask;
 		if (err == ecc->caps->err_mask) {
 			/* uncorrectable errors */
@@ -449,6 +450,7 @@ EXPORT_SYMBOL(mtk_ecc_get_parity_bits);
 
 static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {
 	.err_mask = 0x3f,
+	.err_shift = 8,
 	.ecc_strength = ecc_strength_mt2701,
 	.ecc_regs = mt2701_ecc_regs,
 	.num_ecc_strength = 20,
@@ -459,6 +461,7 @@ static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {
 
 static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {
 	.err_mask = 0x7f,
+	.err_shift = 8,
 	.ecc_strength = ecc_strength_mt2712,
 	.ecc_regs = mt2712_ecc_regs,
 	.num_ecc_strength = 23,
@@ -468,10 +471,11 @@ static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {
 };
 
 static const struct mtk_ecc_caps mtk_ecc_caps_mt7622 = {
-	.err_mask = 0x3f,
+	.err_mask = 0x1f,
+	.err_shift = 5,
 	.ecc_strength = ecc_strength_mt7622,
 	.ecc_regs = mt7622_ecc_regs,
-	.num_ecc_strength = 7,
+	.num_ecc_strength = 5,
 	.ecc_mode_shift = 4,
 	.parity_bits = 13,
 	.pg_irq_sel = 0,
-- 
2.35.1

[PATCH 5.10 043/129] USB: Fix xhci event ring dequeue pointer ERDP update issue

[Greg Kroah-Hartman]

From: Weitao Wang <WeitaoWang-oc@zhaoxin.com>

[ Upstream commit e91ac20889d1a26d077cc511365cd7ff4346a6f3 ]

In some situations software handles TRB events slower than adding TRBs.
If the number of TRB events to be processed in a given interrupt is exactly
the same as the event ring size 256, then the local variable
"event_ring_deq" that holds the initial dequeue position is equal to
software_dequeue after handling all 256 interrupts.

It will cause driver to not update ERDP to hardware,

Software dequeue pointer is out of sync with ERDP on interrupt exit.
On the next interrupt, the event ring may full but driver will not
update ERDP as software_dequeue is equal to ERDP.

[  536.377115] xhci_hcd 0000:00:12.0: ERROR unknown event type 37
[  566.933173] sd 8:0:0:0: [sdb] tag#27 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[  566.933181] sd 8:0:0:0: [sdb] tag#27 CDB: Write(10) 2a 00 17 71 e6 78 00 00 08 00
[  572.041186] xhci_hcd On some situataions,the0000:00:12.0: xHCI host not responding to stop endpoint command.
[  572.057193] xhci_hcd 0000:00:12.0: Host halt failed, -110
[  572.057196] xhci_hcd 0000:00:12.0: xHCI host controller not responding, assume dead
[  572.057236] sd 8:0:0:0: [sdb] tag#26 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD
[  572.057240] sd 8:0:0:0: [sdb] tag#26 CDB: Write(10) 2a 00 38 eb cc d8 00 00 08 00
[  572.057244] sd 8:0:0:0: [sdb] tag#25 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD

Hardware ERDP is updated mid event handling if there are more than 128
events in an interrupt (half of ring size).
Fix this by updating the software local variable at the same time as
hardware ERDP.

[commit message rewording -Mathias]

Fixes: dc0ffbea5729 ("usb: host: xhci: update event ring dequeue pointer on purpose")
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220408134823.2527272-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci-ring.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 76389c0dda8b..fa3a7ac15f82 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2969,6 +2969,8 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
 		if (event_loop++ < TRBS_PER_SEGMENT / 2)
 			continue;
 		xhci_update_erst_dequeue(xhci, event_ring_deq);
+		event_ring_deq = xhci->event_ring->dequeue;
+
 		event_loop = 0;
 	}
 
-- 
2.35.1

[PATCH 5.10 044/129] ARM: dts: imx6qdl-apalis: Fix sgtl5000 detection issue

[Greg Kroah-Hartman]

From: Fabio Estevam <festevam@gmail.com>

[ Upstream commit fa51e1dc4b91375bc18349663a52395ad585bd3c ]

On a custom carrier board with a i.MX6Q Apalis SoM, the sgtl5000 codec
on the SoM is often not detected and the following error message is
seen when the sgtl5000 driver tries to read the ID register:

sgtl5000 1-000a: Error reading chip id -6

The reason for the error is that the MCLK clock is not provided
early enough.

Fix the problem by describing the MCLK pinctrl inside the codec
node instead of placing it inside the audmux pinctrl group.

With this change applied the sgtl5000 is always detected on every boot.

Fixes: 693e3ffaae5a ("ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6qdl-apalis.dtsi | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 30fa349f9d05..a696873dc1ab 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -286,6 +286,8 @@ vgen6_reg: vgen6 {
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_module_3v3_audio>;
 		VDDIO-supply = <&reg_module_3v3>;
@@ -516,8 +518,6 @@ MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
 			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
 			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
 			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
 		>;
 	};
 
@@ -810,6 +810,12 @@ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
 		>;
 	};
 
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1	0x130b0
+		>;
+	};
+
 	pinctrl_spdif: spdifgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
-- 
2.35.1

[PATCH 5.10 045/129] phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 388ec8f079f2f20d5cd183c3bc6f33cbc3ffd3ef ]

The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.

Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220407091857.230386-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/samsung/phy-exynos5250-sata.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/phy/samsung/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c
index 4dd7324d91b2..5077987570fd 100644
--- a/drivers/phy/samsung/phy-exynos5250-sata.c
+++ b/drivers/phy/samsung/phy-exynos5250-sata.c
@@ -190,6 +190,7 @@ static int exynos_sata_phy_probe(struct platform_device *pdev)
 		return -EINVAL;
 
 	sata_phy->client = of_find_i2c_device_by_node(node);
+	of_node_put(node);
 	if (!sata_phy->client)
 		return -EPROBE_DEFER;
 
-- 
2.35.1

[PATCH 5.10 046/129] phy: samsung: exynos5250-sata: fix missing device put in probe error paths

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit 5c8402c4db45dd55c2c93c8d730f5dfa7c78a702 ]

The actions of of_find_i2c_device_by_node() in probe function should be
reversed in error paths by putting the reference to obtained device.

Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220407091857.230386-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/samsung/phy-exynos5250-sata.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/phy/samsung/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c
index 5077987570fd..ea46576404b8 100644
--- a/drivers/phy/samsung/phy-exynos5250-sata.c
+++ b/drivers/phy/samsung/phy-exynos5250-sata.c
@@ -199,20 +199,21 @@ static int exynos_sata_phy_probe(struct platform_device *pdev)
 	sata_phy->phyclk = devm_clk_get(dev, "sata_phyctrl");
 	if (IS_ERR(sata_phy->phyclk)) {
 		dev_err(dev, "failed to get clk for PHY\n");
-		return PTR_ERR(sata_phy->phyclk);
+		ret = PTR_ERR(sata_phy->phyclk);
+		goto put_dev;
 	}
 
 	ret = clk_prepare_enable(sata_phy->phyclk);
 	if (ret < 0) {
 		dev_err(dev, "failed to enable source clk\n");
-		return ret;
+		goto put_dev;
 	}
 
 	sata_phy->phy = devm_phy_create(dev, NULL, &exynos_sata_phy_ops);
 	if (IS_ERR(sata_phy->phy)) {
-		clk_disable_unprepare(sata_phy->phyclk);
 		dev_err(dev, "failed to create PHY\n");
-		return PTR_ERR(sata_phy->phy);
+		ret = PTR_ERR(sata_phy->phy);
+		goto clk_disable;
 	}
 
 	phy_set_drvdata(sata_phy->phy, sata_phy);
@@ -220,11 +221,18 @@ static int exynos_sata_phy_probe(struct platform_device *pdev)
 	phy_provider = devm_of_phy_provider_register(dev,
 					of_phy_simple_xlate);
 	if (IS_ERR(phy_provider)) {
-		clk_disable_unprepare(sata_phy->phyclk);
-		return PTR_ERR(phy_provider);
+		ret = PTR_ERR(phy_provider);
+		goto clk_disable;
 	}
 
 	return 0;
+
+clk_disable:
+	clk_disable_unprepare(sata_phy->phyclk);
+put_dev:
+	put_device(&sata_phy->client->dev);
+
+	return ret;
 }
 
 static const struct of_device_id exynos_sata_phy_of_match[] = {
-- 
2.35.1

[PATCH 5.10 047/129] ARM: OMAP2+: Fix refcount leak in omap_gic_of_init

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 0f83e6b4161617014017a694888dd8743f46f071 ]

The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.

Fixes: fd1c07861491 ("ARM: OMAP4: Fix the init code to have OMAP4460 errata available in DT build")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Message-Id: <20220309104302.18398-1-linmq006@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap2/omap4-common.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 5c3845730dbf..0b80f8bcd304 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -314,10 +314,12 @@ void __init omap_gic_of_init(void)
 
 	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
 	gic_dist_base_addr = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!gic_dist_base_addr);
 
 	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer");
 	twd_base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!twd_base);
 
 skip_errata_init:
-- 
2.35.1

[PATCH 5.10 048/129] bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific

[Greg Kroah-Hartman]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit a12315d6d27093392b6c634e1d35a59f1d1f7a59 ]

On beagleboard revisions A to B4 we need to use gpt12 as the system timer.
However, the quirk handling added for gpt12 caused a regression for system
suspend for am335x as the PM coprocessor needs the timers idled for
suspend.

Let's make the gpt12 quirk specific to omap34xx, other SoCs don't need
it. Beagleboard revisions C and later no longer need to use the gpt12
related quirk. Then at some point, if we decide to drop support for the old
beagleboard revisions A to B4, we can also drop the gpt12 related quirks
completely.

Fixes: 3ff340e24c9d ("bus: ti-sysc: Fix gpt12 system timer issue with reserved status")
Reported-by: Kevin Hilman <khilman@baylibre.com>
Suggested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bus/ti-sysc.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index 18f0650c5d40..ac559c262033 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -3130,13 +3130,27 @@ static int sysc_check_disabled_devices(struct sysc *ddata)
  */
 static int sysc_check_active_timer(struct sysc *ddata)
 {
+	int error;
+
 	if (ddata->cap->type != TI_SYSC_OMAP2_TIMER &&
 	    ddata->cap->type != TI_SYSC_OMAP4_TIMER)
 		return 0;
 
+	/*
+	 * Quirk for omap3 beagleboard revision A to B4 to use gpt12.
+	 * Revision C and later are fixed with commit 23885389dbbb ("ARM:
+	 * dts: Fix timer regression for beagleboard revision c"). This all
+	 * can be dropped if we stop supporting old beagleboard revisions
+	 * A to B4 at some point.
+	 */
+	if (sysc_soc->soc == SOC_3430)
+		error = -ENXIO;
+	else
+		error = -EBUSY;
+
 	if ((ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT) &&
 	    (ddata->cfg.quirks & SYSC_QUIRK_NO_IDLE))
-		return -ENXIO;
+		return error;
 
 	return 0;
 }
-- 
2.35.1

[PATCH 5.10 049/129] phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocks

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 3588060befff75ff39fab7122b94c6fb3148fcda ]

The corresponding API for clk_prepare_enable is clk_disable_unprepare.
Make sure that the clock is unprepared on exit by changing clk_disable
to clk_disable_unprepare.

Fixes: ed31ee7cf1fe ("phy: ti: usb2: Fix logic on -EPROBE_DEFER")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220318105748.19532-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/ti/phy-omap-usb2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
index 4fec90d2624f..f77ac041d836 100644
--- a/drivers/phy/ti/phy-omap-usb2.c
+++ b/drivers/phy/ti/phy-omap-usb2.c
@@ -215,7 +215,7 @@ static int omap_usb2_enable_clocks(struct omap_usb *phy)
 	return 0;
 
 err1:
-	clk_disable(phy->wkupclk);
+	clk_disable_unprepare(phy->wkupclk);
 
 err0:
 	return ret;
-- 
2.35.1

[PATCH 5.10 050/129] ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 0e486fe341fabd8e583f3d601a874cd394979c45 ]

The MCLK of the WM8731 on the AT91SAM9G20-EK board is connected to the
PCK0 output of the SoC and is expected to be set to 12MHz. Previously
this was mapped using pre-common clock API calls in the audio machine
driver but the conversion to the common clock framework broke that so
describe things in the DT instead.

Fixes: ff78a189b0ae55f ("ARM: at91: remove old at91-specific clock driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220404102806.581374-2-broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 87bb39060e8b..ca03685f0f08 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -219,6 +219,12 @@ i2c-gpio-0 {
 		wm8731: wm8731@1b {
 			compatible = "wm8731";
 			reg = <0x1b>;
+
+			/* PCK0 at 12MHz */
+			clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			clock-names = "mclk";
+			assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			assigned-clock-rates = <12000000>;
 		};
 	};
 
-- 
2.35.1

[PATCH 5.10 051/129] ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name

[Greg Kroah-Hartman]

From: Claudiu Beznea <claudiu.beznea@microchip.com>

[ Upstream commit 5c8b49852910caffeebb1ce541fdd264ffc691b8 ]

Pinctrl phandle is for spi1 so rename it to reflect this.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220331141323.194355-1-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/at91-sama5d4_xplained.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index e42dae06b582..73cb157c4ef5 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -91,7 +91,7 @@ usart4: serial@fc010000 {
 
 			spi1: spi@fc018000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0_cs>;
+				pinctrl-0 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioB 21 0>;
 				status = "okay";
 			};
@@ -149,7 +149,7 @@ pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
 						atmel,pins =
 							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
-					pinctrl_spi0_cs: spi0_cs_default {
+					pinctrl_spi1_cs: spi1_cs_default {
 						atmel,pins =
 							<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 					};
-- 
2.35.1

[PATCH 5.10 052/129] phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit d644e0d79829b1b9a14beedbdb0dc1256fc3677d ]

The pm_runtime_enable will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable(). And use pm_runtime_dont_use_autosuspend() to
undo pm_runtime_use_autosuspend()
In the PM Runtime docs:
    Drivers in ->remove() callback should undo the runtime PM changes done
    in ->probe(). Usually this means calling pm_runtime_disable(),
    pm_runtime_dont_use_autosuspend() etc.

We should do this in error handling.

Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220301024615.31899-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/motorola/phy-mapphone-mdm6600.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c
index 5172971f4c36..3cd4d51c247c 100644
--- a/drivers/phy/motorola/phy-mapphone-mdm6600.c
+++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c
@@ -629,7 +629,8 @@ static int phy_mdm6600_probe(struct platform_device *pdev)
 cleanup:
 	if (error < 0)
 		phy_mdm6600_device_power_off(ddata);
-
+	pm_runtime_disable(ddata->dev);
+	pm_runtime_dont_use_autosuspend(ddata->dev);
 	return error;
 }
 
-- 
2.35.1

[PATCH 5.10 053/129] phy: ti: Add missing pm_runtime_disable() in serdes_am654_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit ce88613e5bd579478653a028291098143f2a5bdf ]

The pm_runtime_enable() will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Add missing pm_runtime_disable() for serdes_am654_probe().

Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220301025853.1911-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/ti/phy-am654-serdes.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/ti/phy-am654-serdes.c b/drivers/phy/ti/phy-am654-serdes.c
index 2ff56ce77b30..21c0088f5ca9 100644
--- a/drivers/phy/ti/phy-am654-serdes.c
+++ b/drivers/phy/ti/phy-am654-serdes.c
@@ -838,7 +838,7 @@ static int serdes_am654_probe(struct platform_device *pdev)
 
 clk_err:
 	of_clk_del_provider(node);
-
+	pm_runtime_disable(dev);
 	return ret;
 }
 
-- 
2.35.1

[PATCH 5.10 054/129] ARM: dts: Fix mmc order for omap3-gta04

[Greg Kroah-Hartman]

From: H. Nikolaus Schaller <hns@goldelico.com>

[ Upstream commit 09269dd050094593fc747f2a5853d189fefcb6b5 ]

Commit a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3")
introduces general mmc aliases. Let's tailor them to the need
of the GTA04 board which does not make use of mmc2 and mmc3 interfaces.

Fixes: a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Message-Id: <dc9173ee3d391d9e92b7ab8ed4f84b29f0a21c83.1646744420.git.hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-gta04.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 80c9e5e34136..cc8a378dd076 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -31,6 +31,8 @@ chosen {
 	aliases {
 		display0 = &lcd;
 		display1 = &tv0;
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
 	};
 
 	ldo_3v3: fixedregulator {
-- 
2.35.1

[PATCH 5.10 055/129] ARM: dts: am3517-evm: Fix misc pinmuxing

[Greg Kroah-Hartman]

From: Adam Ford <aford173@gmail.com>

[ Upstream commit 942da3af32b2288e674736eb159d1fc676261691 ]

The bootloader for the AM3517 has previously done much of the pin
muxing, but as the bootloader is moving more and more to a model
based on the device tree, it may no longer automatically mux the
pins, so it is necessary to add the pinmuxing to the Linux device
trees so the respective peripherals can remain functional.

Fixes: 6ed1d7997561 ("ARM: dts: am3517-evm: Add support for UI board and Audio")
Signed-off-by: Adam Ford <aford173@gmail.com>
Message-Id: <20220226214820.747847-1-aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am3517-evm.dts  | 45 +++++++++++++++++++++++++++----
 arch/arm/boot/dts/am3517-som.dtsi |  9 +++++++
 2 files changed, 49 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index 0d2fac98ce7d..c8b80f156ec9 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -161,6 +161,8 @@ pwm11: dmtimer-pwm@11 {
 
 	/* HS USB Host PHY on PORT 1 */
 	hsusb1_phy: hsusb1_phy {
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsusb1_rst_pins>;
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
 		#phy-cells = <0>;
@@ -168,7 +170,9 @@ hsusb1_phy: hsusb1_phy {
 };
 
 &davinci_emac {
-	     status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	status = "okay";
 };
 
 &davinci_mdio {
@@ -193,6 +197,8 @@ dpi_out: endpoint {
 };
 
 &i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
 	/* User DIP swithes [1:8] / User LEDS [1:2] */
 	tca6416: gpio@21 {
@@ -205,6 +211,8 @@ tca6416: gpio@21 {
 };
 
 &i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
 	clock-frequency = <400000>;
 };
 
@@ -223,6 +231,8 @@ &mmc3 {
 };
 
 &usbhshost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_pins>;
 	port1-mode = "ehci-phy";
 };
 
@@ -231,8 +241,35 @@ &usbhsehci {
 };
 
 &omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_rst_pins>;
+
+	ethernet_pins: pinmux_ethernet_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
+			OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
+			OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
+			OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
+			OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
+			OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
+			OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
+			OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
+			OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
+			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_sda */
+		>;
+	};
 
 	leds_pins: pinmux_leds_pins {
 		pinctrl-single,pins = <
@@ -300,8 +337,6 @@ OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs6.gpio_57 */
 };
 
 &omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_pins>;
 
 	hsusb1_pins: pinmux_hsusb1_pins {
 		pinctrl-single,pins = <
diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi
index 8b669e2eafec..f7b680f6c48a 100644
--- a/arch/arm/boot/dts/am3517-som.dtsi
+++ b/arch/arm/boot/dts/am3517-som.dtsi
@@ -69,6 +69,8 @@ nand@0,0 {
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <400000>;
 
 	s35390a: s35390a@30 {
@@ -179,6 +181,13 @@ bluetooth {
 
 &omap3_pmx_core {
 
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_sda */
+		>;
+	};
+
 	wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)  /* mmc1_dat7.gpio_129 */
-- 
2.35.1

[PATCH 5.10 056/129] ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35

[Greg Kroah-Hartman]

From: Adam Ford <aford173@gmail.com>

[ Upstream commit 46ff3df87215ff42c0cd2c4bdb7d74540384a69c ]

The pinout of the OMAP35 and DM37 variants of the SOM-LV are the
same, but the macros which define the pinmuxing are different
between OMAP3530 and DM3730.  The pinmuxing was correct for
for the DM3730, but wrong for the OMAP3530.  Since the boot loader
was correctly pin-muxing the pins, this was not obvious. As the
bootloader not guaranteed to pinmux all the pins any more, this
causes an issue, so the pinmux needs to be moved from a common
file to their respective board files.

Fixes: f8a2e3ff7103 ("ARM: dts: Add minimal support for LogicPD OMAP35xx SOM-LV devkit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Message-Id: <20220303171818.11060-1-aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts | 15 +++++++++++++++
 arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts | 15 +++++++++++++++
 arch/arm/boot/dts/logicpd-som-lv.dtsi            | 15 ---------------
 3 files changed, 30 insertions(+), 15 deletions(-)

diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
index 2a0a98fe67f0..3240c67e0c39 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
@@ -11,3 +11,18 @@ / {
 	model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3";
 };
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
index a604d92221a4..c757f0d7781c 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
@@ -11,3 +11,18 @@ / {
 	model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
 };
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index b56524cc7fe2..55b619c99e24 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -265,21 +265,6 @@ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
 	};
 };
 
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_2_pins>;
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
-		>;
-	};
-};
-
 &uart2 {
 	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
 	pinctrl-names = "default";
-- 
2.35.1

[PATCH 5.10 057/129] ipvs: correctly print the memory size of ip_vs_conn_tab

[Greg Kroah-Hartman]

From: Pengcheng Yang <yangpc@wangsu.com>

[ Upstream commit eba1a872cb73314280d5448d934935b23e30b7ca ]

The memory size of ip_vs_conn_tab changed after we use hlist
instead of list.

Fixes: 731109e78415 ("ipvs: use hlist instead of list")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipvs/ip_vs_conn.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
index 2c467c422dc6..fb67f1ca2495 100644
--- a/net/netfilter/ipvs/ip_vs_conn.c
+++ b/net/netfilter/ipvs/ip_vs_conn.c
@@ -1495,7 +1495,7 @@ int __init ip_vs_conn_init(void)
 	pr_info("Connection hash table configured "
 		"(size=%d, memory=%ldKbytes)\n",
 		ip_vs_conn_tab_size,
-		(long)(ip_vs_conn_tab_size*sizeof(struct list_head))/1024);
+		(long)(ip_vs_conn_tab_size*sizeof(*ip_vs_conn_tab))/1024);
 	IP_VS_DBG(0, "Each connection entry needs %zd bytes at least\n",
 		  sizeof(struct ip_vs_conn));
 
-- 
2.35.1

[PATCH 5.10 058/129] pinctrl: mediatek: moore: Fix build error

[Greg Kroah-Hartman]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 87950929e2ff2236207bdbe14bff8230558b541b ]

If EINT_MTK is m and PINCTRL_MTK_V2 is y, build fails:

drivers/pinctrl/mediatek/pinctrl-moore.o: In function `mtk_gpio_set_config':
pinctrl-moore.c:(.text+0xa6c): undefined reference to `mtk_eint_set_debounce'
drivers/pinctrl/mediatek/pinctrl-moore.o: In function `mtk_gpio_to_irq':
pinctrl-moore.c:(.text+0xacc): undefined reference to `mtk_eint_find_irq'

Select EINT_MTK for PINCTRL_MTK_V2 to fix this.

Fixes: 8174a8512e3e ("pinctrl: mediatek: make MediaTek pinctrl v2 driver ready for buidling loadable module")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20220409105958.37412-1-yuehaibing@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/mediatek/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/mediatek/Kconfig b/drivers/pinctrl/mediatek/Kconfig
index eef17f228669..4ed41d361589 100644
--- a/drivers/pinctrl/mediatek/Kconfig
+++ b/drivers/pinctrl/mediatek/Kconfig
@@ -30,6 +30,7 @@ config PINCTRL_MTK_MOORE
 	select GENERIC_PINMUX_FUNCTIONS
 	select GPIOLIB
 	select OF_GPIO
+	select EINT_MTK
 	select PINCTRL_MTK_V2
 
 config PINCTRL_MTK_PARIS
-- 
2.35.1

[PATCH 5.10 059/129] mtd: rawnand: Fix return value check of wait_for_completion_timeout

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 084c16ab423a8890121b902b405823bfec5b4365 ]

wait_for_completion_timeout() returns unsigned long not int.
It returns 0 if timed out, and positive if completed.
The check for <= 0 is ambiguous and should be == 0 here
indicating timeout which is the only error case.

Fixes: 83738d87e3a0 ("mtd: sh_flctl: Add DMA capabilty")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220412083435.29254-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/nand/raw/sh_flctl.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
index 13df4bdf792a..8f89e2d3d817 100644
--- a/drivers/mtd/nand/raw/sh_flctl.c
+++ b/drivers/mtd/nand/raw/sh_flctl.c
@@ -384,7 +384,8 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
 	dma_addr_t dma_addr;
 	dma_cookie_t cookie;
 	uint32_t reg;
-	int ret;
+	int ret = 0;
+	unsigned long time_left;
 
 	if (dir == DMA_FROM_DEVICE) {
 		chan = flctl->chan_fifo0_rx;
@@ -425,13 +426,14 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
 		goto out;
 	}
 
-	ret =
+	time_left =
 	wait_for_completion_timeout(&flctl->dma_complete,
 				msecs_to_jiffies(3000));
 
-	if (ret <= 0) {
+	if (time_left == 0) {
 		dmaengine_terminate_all(chan);
 		dev_err(&flctl->pdev->dev, "wait_for_completion_timeout\n");
+		ret = -ETIMEDOUT;
 	}
 
 out:
@@ -441,7 +443,7 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
 
 	dma_unmap_single(chan->device->dev, dma_addr, len, dir);
 
-	/* ret > 0 is success */
+	/* ret == 0 is success */
 	return ret;
 }
 
@@ -465,7 +467,7 @@ static void read_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
 
 	/* initiate DMA transfer */
 	if (flctl->chan_fifo0_rx && rlen >= 32 &&
-		flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE) > 0)
+		!flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE))
 			goto convert;	/* DMA success */
 
 	/* do polling transfer */
@@ -524,7 +526,7 @@ static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen,
 
 	/* initiate DMA transfer */
 	if (flctl->chan_fifo0_tx && rlen >= 32 &&
-		flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE) > 0)
+		!flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE))
 			return;	/* DMA success */
 
 	/* do polling transfer */
-- 
2.35.1

[PATCH 5.10 060/129] mtd: fix part field data corruption in mtd_info

[Greg Kroah-Hartman]

From: Oleksandr Ocheretnyi <oocheret@cisco.com>

[ Upstream commit 37c5f9e80e015d0df17d0c377c18523002986851 ]

Commit 46b5889cc2c5 ("mtd: implement proper partition handling")
started using "mtd_get_master_ofs()" in mtd callbacks to determine
memory offsets by means of 'part' field from mtd_info, what previously
was smashed accessing 'master' field in the mtd_set_dev_defaults() method.
That provides wrong offset what causes hardware access errors.

Just make 'part', 'master' as separate fields, rather than using
union type to avoid 'part' data corruption when mtd_set_dev_defaults()
is called.

Fixes: 46b5889cc2c5 ("mtd: implement proper partition handling")
Signed-off-by: Oleksandr Ocheretnyi <oocheret@cisco.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220417184649.449289-1-oocheret@cisco.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/mtd/mtd.h | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 157357ec1441..fc41fecfe44f 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -388,10 +388,8 @@ struct mtd_info {
 	/* List of partitions attached to this MTD device */
 	struct list_head partitions;
 
-	union {
-		struct mtd_part part;
-		struct mtd_master master;
-	};
+	struct mtd_part part;
+	struct mtd_master master;
 };
 
 static inline struct mtd_info *mtd_get_master(struct mtd_info *mtd)
-- 
2.35.1

[PATCH 5.10 061/129] pinctrl: stm32: Do not call stm32_gpio_get() for edge triggered IRQs in EOI

[Greg Kroah-Hartman]

From: Marek Vasut <marex@denx.de>

[ Upstream commit e74200ebf7c4f6a7a7d1be9f63833ddba251effa ]

The stm32_gpio_get() should only be called for LEVEL triggered interrupts,
skip calling it for EDGE triggered interrupts altogether to avoid wasting
CPU cycles in EOI handler. On this platform, EDGE triggered interrupts are
the majority and LEVEL triggered interrupts are the exception no less, and
the CPU cycles are not abundant.

Fixes: 47beed513a85b ("pinctrl: stm32: Add level interrupt support to gpio irq chip")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Fabien Dessenne <fabien.dessenne@foss.st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
To: linux-gpio@vger.kernel.org
Link: https://lore.kernel.org/r/20220415215410.498349-1-marex@denx.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/stm32/pinctrl-stm32.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index e13723bb2be4..12d4d92c4a17 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -311,6 +311,10 @@ static void stm32_gpio_irq_trigger(struct irq_data *d)
 	struct stm32_gpio_bank *bank = d->domain->host_data;
 	int level;
 
+	/* Do not access the GPIO if this is not LEVEL triggered IRQ. */
+	if (!(bank->irq_type[d->hwirq] & IRQ_TYPE_LEVEL_MASK))
+		return;
+
 	/* If level interrupt type then retrig */
 	level = stm32_gpio_get(&bank->gpio_chip, d->hwirq);
 	if ((level == 0 && bank->irq_type[d->hwirq] == IRQ_TYPE_LEVEL_LOW) ||
-- 
2.35.1




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5.10 061/129] pinctrl: stm32: Do not call stm32_gpio_get() for edge triggered IRQs in EOI

[Greg Kroah-Hartman]

From: Marek Vasut <marex@denx.de>

[ Upstream commit e74200ebf7c4f6a7a7d1be9f63833ddba251effa ]

The stm32_gpio_get() should only be called for LEVEL triggered interrupts,
skip calling it for EDGE triggered interrupts altogether to avoid wasting
CPU cycles in EOI handler. On this platform, EDGE triggered interrupts are
the majority and LEVEL triggered interrupts are the exception no less, and
the CPU cycles are not abundant.

Fixes: 47beed513a85b ("pinctrl: stm32: Add level interrupt support to gpio irq chip")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Fabien Dessenne <fabien.dessenne@foss.st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
To: linux-gpio@vger.kernel.org
Link: https://lore.kernel.org/r/20220415215410.498349-1-marex@denx.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/stm32/pinctrl-stm32.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index e13723bb2be4..12d4d92c4a17 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -311,6 +311,10 @@ static void stm32_gpio_irq_trigger(struct irq_data *d)
 	struct stm32_gpio_bank *bank = d->domain->host_data;
 	int level;
 
+	/* Do not access the GPIO if this is not LEVEL triggered IRQ. */
+	if (!(bank->irq_type[d->hwirq] & IRQ_TYPE_LEVEL_MASK))
+		return;
+
 	/* If level interrupt type then retrig */
 	level = stm32_gpio_get(&bank->gpio_chip, d->hwirq);
 	if ((level == 0 && bank->irq_type[d->hwirq] == IRQ_TYPE_LEVEL_LOW) ||
-- 
2.35.1

[PATCH 5.10 062/129] memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode

[Greg Kroah-Hartman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 7e842d70fe599bc13594b650b2144c4b6e6d6bf1 ]

HyperFlash devices fail to probe:

    rpc-if-hyperflash rpc-if-hyperflash: probing of hyperbus device failed

In HyperFlash or Octal-SPI Flash mode, the Transfer Data Enable bits
(SPIDE) in the Manual Mode Enable Setting Register (SMENR) are derived
from half of the transfer size, cfr. the rpcif_bits_set() helper
function.  However, rpcif_reg_{read,write}() does not take the bus size
into account, and does not double all Manual Mode Data Register access
sizes when communicating with a HyperFlash or Octal-SPI Flash device.

Fix this, and avoid the back-and-forth conversion between transfer size
and Transfer Data Enable bits, by explicitly storing the transfer size
in struct rpcif, and using that value to determine access size in
rpcif_reg_{read,write}().

Enforce that the "high" Manual Mode Read/Write Data Registers
(SM[RW]DR1) are only used for 8-byte data accesses.
While at it, forbid writing to the Manual Mode Read Data Registers,
as they are read-only.

Fixes: fff53a551db50f5e ("memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/cde9bfacf704c81865f57b15d1b48a4793da4286.1649681476.git.geert+renesas@glider.be
Link: https://lore.kernel.org/r/20220420070526.9367-1-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/memory/renesas-rpc-if.c | 60 +++++++++++++++++++++++++--------
 include/memory/renesas-rpc-if.h |  1 +
 2 files changed, 47 insertions(+), 14 deletions(-)

diff --git a/drivers/memory/renesas-rpc-if.c b/drivers/memory/renesas-rpc-if.c
index 781af51e3f79..1dfb81dea961 100644
--- a/drivers/memory/renesas-rpc-if.c
+++ b/drivers/memory/renesas-rpc-if.c
@@ -163,25 +163,39 @@ static const struct regmap_access_table rpcif_volatile_table = {
 
 
 /*
- * Custom accessor functions to ensure SMRDR0 and SMWDR0 are always accessed
- * with proper width. Requires SMENR_SPIDE to be correctly set before!
+ * Custom accessor functions to ensure SM[RW]DR[01] are always accessed with
+ * proper width.  Requires rpcif.xfer_size to be correctly set before!
  */
 static int rpcif_reg_read(void *context, unsigned int reg, unsigned int *val)
 {
 	struct rpcif *rpc = context;
 
-	if (reg == RPCIF_SMRDR0 || reg == RPCIF_SMWDR0) {
-		u32 spide = readl(rpc->base + RPCIF_SMENR) & RPCIF_SMENR_SPIDE(0xF);
-
-		if (spide == 0x8) {
+	switch (reg) {
+	case RPCIF_SMRDR0:
+	case RPCIF_SMWDR0:
+		switch (rpc->xfer_size) {
+		case 1:
 			*val = readb(rpc->base + reg);
 			return 0;
-		} else if (spide == 0xC) {
+
+		case 2:
 			*val = readw(rpc->base + reg);
 			return 0;
-		} else if (spide != 0xF) {
+
+		case 4:
+		case 8:
+			*val = readl(rpc->base + reg);
+			return 0;
+
+		default:
 			return -EILSEQ;
 		}
+
+	case RPCIF_SMRDR1:
+	case RPCIF_SMWDR1:
+		if (rpc->xfer_size != 8)
+			return -EILSEQ;
+		break;
 	}
 
 	*val = readl(rpc->base + reg);
@@ -193,18 +207,34 @@ static int rpcif_reg_write(void *context, unsigned int reg, unsigned int val)
 {
 	struct rpcif *rpc = context;
 
-	if (reg == RPCIF_SMRDR0 || reg == RPCIF_SMWDR0) {
-		u32 spide = readl(rpc->base + RPCIF_SMENR) & RPCIF_SMENR_SPIDE(0xF);
-
-		if (spide == 0x8) {
+	switch (reg) {
+	case RPCIF_SMWDR0:
+		switch (rpc->xfer_size) {
+		case 1:
 			writeb(val, rpc->base + reg);
 			return 0;
-		} else if (spide == 0xC) {
+
+		case 2:
 			writew(val, rpc->base + reg);
 			return 0;
-		} else if (spide != 0xF) {
+
+		case 4:
+		case 8:
+			writel(val, rpc->base + reg);
+			return 0;
+
+		default:
 			return -EILSEQ;
 		}
+
+	case RPCIF_SMWDR1:
+		if (rpc->xfer_size != 8)
+			return -EILSEQ;
+		break;
+
+	case RPCIF_SMRDR0:
+	case RPCIF_SMRDR1:
+		return -EPERM;
 	}
 
 	writel(val, rpc->base + reg);
@@ -455,6 +485,7 @@ int rpcif_manual_xfer(struct rpcif *rpc)
 
 			smenr |= RPCIF_SMENR_SPIDE(rpcif_bits_set(rpc, nbytes));
 			regmap_write(rpc->regmap, RPCIF_SMENR, smenr);
+			rpc->xfer_size = nbytes;
 
 			memcpy(data, rpc->buffer + pos, nbytes);
 			if (nbytes == 8) {
@@ -519,6 +550,7 @@ int rpcif_manual_xfer(struct rpcif *rpc)
 			regmap_write(rpc->regmap, RPCIF_SMENR, smenr);
 			regmap_write(rpc->regmap, RPCIF_SMCR,
 				     rpc->smcr | RPCIF_SMCR_SPIE);
+			rpc->xfer_size = nbytes;
 			ret = wait_msg_xfer_end(rpc);
 			if (ret)
 				goto err_out;
diff --git a/include/memory/renesas-rpc-if.h b/include/memory/renesas-rpc-if.h
index aceb2c360d3f..0e3dac030219 100644
--- a/include/memory/renesas-rpc-if.h
+++ b/include/memory/renesas-rpc-if.h
@@ -65,6 +65,7 @@ struct	rpcif {
 	size_t size;
 	enum rpcif_data_dir dir;
 	u8 bus_size;
+	u8 xfer_size;
 	void *buffer;
 	u32 xferlen;
 	u32 smcr;
-- 
2.35.1

[PATCH 5.10 063/129] net: dsa: Add missing of_node_put() in dsa_port_link_register_of

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit fc06b2867f4cea543505acfb194c2be4ebf0c7d3 ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.
of_node_put() will check for NULL value.

Fixes: a20f997010c4 ("net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/dsa/port.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/dsa/port.c b/net/dsa/port.c
index 73569c9af3cc..c9d552c4c358 100644
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
@@ -721,8 +721,10 @@ int dsa_port_link_register_of(struct dsa_port *dp)
 			if (ds->ops->phylink_mac_link_down)
 				ds->ops->phylink_mac_link_down(ds, port,
 					MLO_AN_FIXED, PHY_INTERFACE_MODE_NA);
+			of_node_put(phy_np);
 			return dsa_port_phylink_register(dp);
 		}
+		of_node_put(phy_np);
 		return 0;
 	}
 
-- 
2.35.1

[PATCH 5.10 064/129] netfilter: nft_set_rbtree: overlap detection with element re-addition after deletion

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit babc3dc9524f0bcb5a0ec61f3c3639b11508fad6 ]

This patch fixes spurious EEXIST errors.

Extend d2df92e98a34 ("netfilter: nft_set_rbtree: handle element
re-addition after deletion") to deal with elements with same end flags
in the same transation.

Reset the overlap flag as described by 7c84d41416d8 ("netfilter:
nft_set_rbtree: Detect partial overlaps on insertion").

Fixes: 7c84d41416d8 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion")
Fixes: d2df92e98a34 ("netfilter: nft_set_rbtree: handle element re-addition after deletion")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_set_rbtree.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c
index 217ab3644c25..94a5446c5eae 100644
--- a/net/netfilter/nft_set_rbtree.c
+++ b/net/netfilter/nft_set_rbtree.c
@@ -348,7 +348,11 @@ static int __nft_rbtree_insert(const struct net *net, const struct nft_set *set,
 				*ext = &rbe->ext;
 				return -EEXIST;
 			} else {
-				p = &parent->rb_left;
+				overlap = false;
+				if (nft_rbtree_interval_end(rbe))
+					p = &parent->rb_left;
+				else
+					p = &parent->rb_right;
 			}
 		}
 
-- 
2.35.1

[PATCH 5.10 065/129] bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook

[Greg Kroah-Hartman]

From: Eyal Birger <eyal.birger@gmail.com>

[ Upstream commit b02d196c44ead1a5949729be9ff08fe781c3e48a ]

xmit_check_hhlen() observes the dst for getting the device hard header
length to make sure a modified packet can fit. When a helper which changes
the dst - such as bpf_skb_set_tunnel_key() - is called as part of the
xmit program the accessed dst is no longer valid.

This leads to the following splat:

 BUG: kernel NULL pointer dereference, address: 00000000000000de
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 0 PID: 798 Comm: ping Not tainted 5.18.0-rc2+ #103
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
 RIP: 0010:bpf_xmit+0xfb/0x17f
 Code: c6 c0 4d cd 8e 48 c7 c7 7d 33 f0 8e e8 42 09 fb ff 48 8b 45 58 48 8b 95 c8 00 00 00 48 2b 95 c0 00 00 00 48 83 e0 fe 48 8b 00 <0f> b7 80 de 00 00 00 39 c2 73 22 29 d0 b9 20 0a 00 00 31 d2 48 89
 RSP: 0018:ffffb148c0bc7b98 EFLAGS: 00010282
 RAX: 0000000000000000 RBX: 0000000000240008 RCX: 0000000000000000
 RDX: 0000000000000010 RSI: 00000000ffffffea RDI: 00000000ffffffff
 RBP: ffff922a828a4e00 R08: ffffffff8f1350e8 R09: 00000000ffffdfff
 R10: ffffffff8f055100 R11: ffffffff8f105100 R12: 0000000000000000
 R13: ffff922a828a4e00 R14: 0000000000000040 R15: 0000000000000000
 FS:  00007f414e8f0080(0000) GS:ffff922afdc00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00000000000000de CR3: 0000000002d80006 CR4: 0000000000370ef0
 Call Trace:
  <TASK>
  lwtunnel_xmit.cold+0x71/0xc8
  ip_finish_output2+0x279/0x520
  ? __ip_finish_output.part.0+0x21/0x130

Fix by fetching the device hard header length before running the BPF code.

Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220420165219.1755407-1-eyal.birger@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/lwt_bpf.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/net/core/lwt_bpf.c b/net/core/lwt_bpf.c
index 2f7940bcf715..3fd207fe1284 100644
--- a/net/core/lwt_bpf.c
+++ b/net/core/lwt_bpf.c
@@ -158,10 +158,8 @@ static int bpf_output(struct net *net, struct sock *sk, struct sk_buff *skb)
 	return dst->lwtstate->orig_output(net, sk, skb);
 }
 
-static int xmit_check_hhlen(struct sk_buff *skb)
+static int xmit_check_hhlen(struct sk_buff *skb, int hh_len)
 {
-	int hh_len = skb_dst(skb)->dev->hard_header_len;
-
 	if (skb_headroom(skb) < hh_len) {
 		int nhead = HH_DATA_ALIGN(hh_len - skb_headroom(skb));
 
@@ -273,6 +271,7 @@ static int bpf_xmit(struct sk_buff *skb)
 
 	bpf = bpf_lwt_lwtunnel(dst->lwtstate);
 	if (bpf->xmit.prog) {
+		int hh_len = dst->dev->hard_header_len;
 		__be16 proto = skb->protocol;
 		int ret;
 
@@ -290,7 +289,7 @@ static int bpf_xmit(struct sk_buff *skb)
 			/* If the header was expanded, headroom might be too
 			 * small for L2 header to come, expand as needed.
 			 */
-			ret = xmit_check_hhlen(skb);
+			ret = xmit_check_hhlen(skb, hh_len);
 			if (unlikely(ret))
 				return ret;
 
-- 
2.35.1

[PATCH 5.10 066/129] pinctrl: rockchip: fix RK3308 pinmux bits

[Greg Kroah-Hartman]

From: Luca Ceresoli <luca.ceresoli@bootlin.com>

[ Upstream commit 1f3e25a068832f8892a5ff71467622d012f5bc9f ]

Some of the pinmuxing bits described in rk3308_mux_recalced_data are wrong,
pointing to non-existing registers.

Fix the entire table.

Also add a comment in front of each entry with the same string that appears
in the datasheet to make the table easier to compare with the docs.

This fix has been tested on real hardware for the gpio3b3_sel entry.

Fixes: 7825aeb7b208 ("pinctrl: rockchip: add rk3308 SoC support")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220420142432.248565-1-luca.ceresoli@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-rockchip.c | 45 ++++++++++++++++++++----------
 1 file changed, 30 insertions(+), 15 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 9df48e0cf4cb..07b1204174bf 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -663,95 +663,110 @@ static  struct rockchip_mux_recalced_data rk3128_mux_recalced_data[] = {
 
 static struct rockchip_mux_recalced_data rk3308_mux_recalced_data[] = {
 	{
+		/* gpio1b6_sel */
 		.num = 1,
 		.pin = 14,
 		.reg = 0x28,
 		.bit = 12,
 		.mask = 0xf
 	}, {
+		/* gpio1b7_sel */
 		.num = 1,
 		.pin = 15,
 		.reg = 0x2c,
 		.bit = 0,
 		.mask = 0x3
 	}, {
+		/* gpio1c2_sel */
 		.num = 1,
 		.pin = 18,
 		.reg = 0x30,
 		.bit = 4,
 		.mask = 0xf
 	}, {
+		/* gpio1c3_sel */
 		.num = 1,
 		.pin = 19,
 		.reg = 0x30,
 		.bit = 8,
 		.mask = 0xf
 	}, {
+		/* gpio1c4_sel */
 		.num = 1,
 		.pin = 20,
 		.reg = 0x30,
 		.bit = 12,
 		.mask = 0xf
 	}, {
+		/* gpio1c5_sel */
 		.num = 1,
 		.pin = 21,
 		.reg = 0x34,
 		.bit = 0,
 		.mask = 0xf
 	}, {
+		/* gpio1c6_sel */
 		.num = 1,
 		.pin = 22,
 		.reg = 0x34,
 		.bit = 4,
 		.mask = 0xf
 	}, {
+		/* gpio1c7_sel */
 		.num = 1,
 		.pin = 23,
 		.reg = 0x34,
 		.bit = 8,
 		.mask = 0xf
 	}, {
+		/* gpio3b4_sel */
 		.num = 3,
 		.pin = 12,
 		.reg = 0x68,
 		.bit = 8,
 		.mask = 0xf
 	}, {
+		/* gpio3b5_sel */
 		.num = 3,
 		.pin = 13,
 		.reg = 0x68,
 		.bit = 12,
 		.mask = 0xf
 	}, {
+		/* gpio2a2_sel */
 		.num = 2,
 		.pin = 2,
-		.reg = 0x608,
-		.bit = 0,
-		.mask = 0x7
+		.reg = 0x40,
+		.bit = 4,
+		.mask = 0x3
 	}, {
+		/* gpio2a3_sel */
 		.num = 2,
 		.pin = 3,
-		.reg = 0x608,
-		.bit = 4,
-		.mask = 0x7
+		.reg = 0x40,
+		.bit = 6,
+		.mask = 0x3
 	}, {
+		/* gpio2c0_sel */
 		.num = 2,
 		.pin = 16,
-		.reg = 0x610,
-		.bit = 8,
-		.mask = 0x7
+		.reg = 0x50,
+		.bit = 0,
+		.mask = 0x3
 	}, {
+		/* gpio3b2_sel */
 		.num = 3,
 		.pin = 10,
-		.reg = 0x610,
-		.bit = 0,
-		.mask = 0x7
+		.reg = 0x68,
+		.bit = 4,
+		.mask = 0x3
 	}, {
+		/* gpio3b3_sel */
 		.num = 3,
 		.pin = 11,
-		.reg = 0x610,
-		.bit = 4,
-		.mask = 0x7
+		.reg = 0x68,
+		.bit = 6,
+		.mask = 0x3
 	},
 };
 
-- 
2.35.1

[PATCH 5.10 067/129] tcp: md5: incorrect tcp_header_len for incoming connections

[Greg Kroah-Hartman]

From: Francesco Ruggeri <fruggeri@arista.com>

[ Upstream commit 5b0b9e4c2c895227c8852488b3f09839233bba54 ]

In tcp_create_openreq_child we adjust tcp_header_len for md5 using the
remote address in newsk. But that address is still 0 in newsk at this
point, and it is only set later by the callers (tcp_v[46]_syn_recv_sock).
Use the address from the request socket instead.

Fixes: cfb6eeb4c860 ("[TCP]: MD5 Signature Option (RFC2385) support.")
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220421005026.686A45EC01F2@us226.sjc.aristanetworks.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_minisocks.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index f0f67b25c97a..62f5ef9e6f93 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -538,7 +538,7 @@ struct sock *tcp_create_openreq_child(const struct sock *sk,
 	newtp->tsoffset = treq->ts_off;
 #ifdef CONFIG_TCP_MD5SIG
 	newtp->md5sig_info = NULL;	/*XXX*/
-	if (newtp->af_specific->md5_lookup(sk, newsk))
+	if (treq->af_specific->req_md5_lookup(sk, req_to_sk(req)))
 		newtp->tcp_header_len += TCPOLEN_MD5SIG_ALIGNED;
 #endif
 	if (skb->len >= TCP_MSS_DEFAULT + newtp->tcp_header_len)
-- 
2.35.1

[PATCH 5.10 068/129] pinctrl: stm32: Keep pinctrl block clock enabled when LEVEL IRQ requested

[Greg Kroah-Hartman]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 05d8af449d93e04547b4c6b328e39c890bc803f4 ]

The current EOI handler for LEVEL triggered interrupts calls clk_enable(),
register IO, clk_disable(). The clock manipulation requires locking which
happens with IRQs disabled in clk_enable_lock(). Instead of turning the
clock on and off all the time, enable the clock in case LEVEL interrupt is
requested and keep the clock enabled until all LEVEL interrupts are freed.
The LEVEL interrupts are an exception on this platform and seldom used, so
this does not affect the common case.

This simplifies the LEVEL interrupt handling considerably and also fixes
the following splat found when using preempt-rt:
 ------------[ cut here ]------------
 WARNING: CPU: 0 PID: 0 at kernel/locking/rtmutex.c:2040 __rt_mutex_trylock+0x37/0x62
 Modules linked in:
 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.109-rt65-stable-standard-00068-g6a5afc4b1217 #85
 Hardware name: STM32 (Device Tree Support)
 [<c010a45d>] (unwind_backtrace) from [<c010766f>] (show_stack+0xb/0xc)
 [<c010766f>] (show_stack) from [<c06353ab>] (dump_stack+0x6f/0x84)
 [<c06353ab>] (dump_stack) from [<c01145e3>] (__warn+0x7f/0xa4)
 [<c01145e3>] (__warn) from [<c063386f>] (warn_slowpath_fmt+0x3b/0x74)
 [<c063386f>] (warn_slowpath_fmt) from [<c063b43d>] (__rt_mutex_trylock+0x37/0x62)
 [<c063b43d>] (__rt_mutex_trylock) from [<c063c053>] (rt_spin_trylock+0x7/0x16)
 [<c063c053>] (rt_spin_trylock) from [<c036a2f3>] (clk_enable_lock+0xb/0x80)
 [<c036a2f3>] (clk_enable_lock) from [<c036ba69>] (clk_core_enable_lock+0x9/0x18)
 [<c036ba69>] (clk_core_enable_lock) from [<c034e9f3>] (stm32_gpio_get+0x11/0x24)
 [<c034e9f3>] (stm32_gpio_get) from [<c034ef43>] (stm32_gpio_irq_trigger+0x1f/0x48)
 [<c034ef43>] (stm32_gpio_irq_trigger) from [<c014aa53>] (handle_fasteoi_irq+0x71/0xa8)
 [<c014aa53>] (handle_fasteoi_irq) from [<c0147111>] (generic_handle_irq+0x19/0x22)
 [<c0147111>] (generic_handle_irq) from [<c014752d>] (__handle_domain_irq+0x55/0x64)
 [<c014752d>] (__handle_domain_irq) from [<c0346f13>] (gic_handle_irq+0x53/0x64)
 [<c0346f13>] (gic_handle_irq) from [<c0100ba5>] (__irq_svc+0x65/0xc0)
 Exception stack(0xc0e01f18 to 0xc0e01f60)
 1f00:                                                       0000300c 00000000
 1f20: 0000300c c010ff01 00000000 00000000 c0e00000 c0e07714 00000001 c0e01f78
 1f40: c0e07758 00000000 ef7cd0ff c0e01f68 c010554b c0105542 40000033 ffffffff
 [<c0100ba5>] (__irq_svc) from [<c0105542>] (arch_cpu_idle+0xc/0x1e)
 [<c0105542>] (arch_cpu_idle) from [<c063be95>] (default_idle_call+0x21/0x3c)
 [<c063be95>] (default_idle_call) from [<c01324f7>] (do_idle+0xe3/0x1e4)
 [<c01324f7>] (do_idle) from [<c01327b3>] (cpu_startup_entry+0x13/0x14)
 [<c01327b3>] (cpu_startup_entry) from [<c0a00c13>] (start_kernel+0x397/0x3d4)
 [<c0a00c13>] (start_kernel) from [<00000000>] (0x0)
 ---[ end trace 0000000000000002 ]---

Power consumption measured on STM32MP157C DHCOM SoM is not increased or
is below noise threshold.

Fixes: 47beed513a85b ("pinctrl: stm32: Add level interrupt support to gpio irq chip")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Fabien Dessenne <fabien.dessenne@foss.st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
To: linux-gpio@vger.kernel.org
Reviewed-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20220421140827.214088-1-marex@denx.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/stm32/pinctrl-stm32.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index 12d4d92c4a17..b017dd400c46 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -225,6 +225,13 @@ static void stm32_gpio_free(struct gpio_chip *chip, unsigned offset)
 	pinctrl_gpio_free(chip->base + offset);
 }
 
+static int stm32_gpio_get_noclk(struct gpio_chip *chip, unsigned int offset)
+{
+	struct stm32_gpio_bank *bank = gpiochip_get_data(chip);
+
+	return !!(readl_relaxed(bank->base + STM32_GPIO_IDR) & BIT(offset));
+}
+
 static int stm32_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct stm32_gpio_bank *bank = gpiochip_get_data(chip);
@@ -232,7 +239,7 @@ static int stm32_gpio_get(struct gpio_chip *chip, unsigned offset)
 
 	clk_enable(bank->clk);
 
-	ret = !!(readl_relaxed(bank->base + STM32_GPIO_IDR) & BIT(offset));
+	ret = stm32_gpio_get_noclk(chip, offset);
 
 	clk_disable(bank->clk);
 
@@ -316,7 +323,7 @@ static void stm32_gpio_irq_trigger(struct irq_data *d)
 		return;
 
 	/* If level interrupt type then retrig */
-	level = stm32_gpio_get(&bank->gpio_chip, d->hwirq);
+	level = stm32_gpio_get_noclk(&bank->gpio_chip, d->hwirq);
 	if ((level == 0 && bank->irq_type[d->hwirq] == IRQ_TYPE_LEVEL_LOW) ||
 	    (level == 1 && bank->irq_type[d->hwirq] == IRQ_TYPE_LEVEL_HIGH))
 		irq_chip_retrigger_hierarchy(d);
@@ -358,6 +365,7 @@ static int stm32_gpio_irq_request_resources(struct irq_data *irq_data)
 {
 	struct stm32_gpio_bank *bank = irq_data->domain->host_data;
 	struct stm32_pinctrl *pctl = dev_get_drvdata(bank->gpio_chip.parent);
+	unsigned long flags;
 	int ret;
 
 	ret = stm32_gpio_direction_input(&bank->gpio_chip, irq_data->hwirq);
@@ -371,6 +379,10 @@ static int stm32_gpio_irq_request_resources(struct irq_data *irq_data)
 		return ret;
 	}
 
+	flags = irqd_get_trigger_type(irq_data);
+	if (flags & IRQ_TYPE_LEVEL_MASK)
+		clk_enable(bank->clk);
+
 	return 0;
 }
 
@@ -378,6 +390,9 @@ static void stm32_gpio_irq_release_resources(struct irq_data *irq_data)
 {
 	struct stm32_gpio_bank *bank = irq_data->domain->host_data;
 
+	if (bank->irq_type[irq_data->hwirq] & IRQ_TYPE_LEVEL_MASK)
+		clk_disable(bank->clk);
+
 	gpiochip_unlock_as_irq(&bank->gpio_chip, irq_data->hwirq);
 }
 
-- 
2.35.1




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5.10 068/129] pinctrl: stm32: Keep pinctrl block clock enabled when LEVEL IRQ requested

[Greg Kroah-Hartman]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 05d8af449d93e04547b4c6b328e39c890bc803f4 ]

The current EOI handler for LEVEL triggered interrupts calls clk_enable(),
register IO, clk_disable(). The clock manipulation requires locking which
happens with IRQs disabled in clk_enable_lock(). Instead of turning the
clock on and off all the time, enable the clock in case LEVEL interrupt is
requested and keep the clock enabled until all LEVEL interrupts are freed.
The LEVEL interrupts are an exception on this platform and seldom used, so
this does not affect the common case.

This simplifies the LEVEL interrupt handling considerably and also fixes
the following splat found when using preempt-rt:
 ------------[ cut here ]------------
 WARNING: CPU: 0 PID: 0 at kernel/locking/rtmutex.c:2040 __rt_mutex_trylock+0x37/0x62
 Modules linked in:
 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.109-rt65-stable-standard-00068-g6a5afc4b1217 #85
 Hardware name: STM32 (Device Tree Support)
 [<c010a45d>] (unwind_backtrace) from [<c010766f>] (show_stack+0xb/0xc)
 [<c010766f>] (show_stack) from [<c06353ab>] (dump_stack+0x6f/0x84)
 [<c06353ab>] (dump_stack) from [<c01145e3>] (__warn+0x7f/0xa4)
 [<c01145e3>] (__warn) from [<c063386f>] (warn_slowpath_fmt+0x3b/0x74)
 [<c063386f>] (warn_slowpath_fmt) from [<c063b43d>] (__rt_mutex_trylock+0x37/0x62)
 [<c063b43d>] (__rt_mutex_trylock) from [<c063c053>] (rt_spin_trylock+0x7/0x16)
 [<c063c053>] (rt_spin_trylock) from [<c036a2f3>] (clk_enable_lock+0xb/0x80)
 [<c036a2f3>] (clk_enable_lock) from [<c036ba69>] (clk_core_enable_lock+0x9/0x18)
 [<c036ba69>] (clk_core_enable_lock) from [<c034e9f3>] (stm32_gpio_get+0x11/0x24)
 [<c034e9f3>] (stm32_gpio_get) from [<c034ef43>] (stm32_gpio_irq_trigger+0x1f/0x48)
 [<c034ef43>] (stm32_gpio_irq_trigger) from [<c014aa53>] (handle_fasteoi_irq+0x71/0xa8)
 [<c014aa53>] (handle_fasteoi_irq) from [<c0147111>] (generic_handle_irq+0x19/0x22)
 [<c0147111>] (generic_handle_irq) from [<c014752d>] (__handle_domain_irq+0x55/0x64)
 [<c014752d>] (__handle_domain_irq) from [<c0346f13>] (gic_handle_irq+0x53/0x64)
 [<c0346f13>] (gic_handle_irq) from [<c0100ba5>] (__irq_svc+0x65/0xc0)
 Exception stack(0xc0e01f18 to 0xc0e01f60)
 1f00:                                                       0000300c 00000000
 1f20: 0000300c c010ff01 00000000 00000000 c0e00000 c0e07714 00000001 c0e01f78
 1f40: c0e07758 00000000 ef7cd0ff c0e01f68 c010554b c0105542 40000033 ffffffff
 [<c0100ba5>] (__irq_svc) from [<c0105542>] (arch_cpu_idle+0xc/0x1e)
 [<c0105542>] (arch_cpu_idle) from [<c063be95>] (default_idle_call+0x21/0x3c)
 [<c063be95>] (default_idle_call) from [<c01324f7>] (do_idle+0xe3/0x1e4)
 [<c01324f7>] (do_idle) from [<c01327b3>] (cpu_startup_entry+0x13/0x14)
 [<c01327b3>] (cpu_startup_entry) from [<c0a00c13>] (start_kernel+0x397/0x3d4)
 [<c0a00c13>] (start_kernel) from [<00000000>] (0x0)
 ---[ end trace 0000000000000002 ]---

Power consumption measured on STM32MP157C DHCOM SoM is not increased or
is below noise threshold.

Fixes: 47beed513a85b ("pinctrl: stm32: Add level interrupt support to gpio irq chip")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Fabien Dessenne <fabien.dessenne@foss.st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
To: linux-gpio@vger.kernel.org
Reviewed-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20220421140827.214088-1-marex@denx.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/stm32/pinctrl-stm32.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index 12d4d92c4a17..b017dd400c46 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -225,6 +225,13 @@ static void stm32_gpio_free(struct gpio_chip *chip, unsigned offset)
 	pinctrl_gpio_free(chip->base + offset);
 }
 
+static int stm32_gpio_get_noclk(struct gpio_chip *chip, unsigned int offset)
+{
+	struct stm32_gpio_bank *bank = gpiochip_get_data(chip);
+
+	return !!(readl_relaxed(bank->base + STM32_GPIO_IDR) & BIT(offset));
+}
+
 static int stm32_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct stm32_gpio_bank *bank = gpiochip_get_data(chip);
@@ -232,7 +239,7 @@ static int stm32_gpio_get(struct gpio_chip *chip, unsigned offset)
 
 	clk_enable(bank->clk);
 
-	ret = !!(readl_relaxed(bank->base + STM32_GPIO_IDR) & BIT(offset));
+	ret = stm32_gpio_get_noclk(chip, offset);
 
 	clk_disable(bank->clk);
 
@@ -316,7 +323,7 @@ static void stm32_gpio_irq_trigger(struct irq_data *d)
 		return;
 
 	/* If level interrupt type then retrig */
-	level = stm32_gpio_get(&bank->gpio_chip, d->hwirq);
+	level = stm32_gpio_get_noclk(&bank->gpio_chip, d->hwirq);
 	if ((level == 0 && bank->irq_type[d->hwirq] == IRQ_TYPE_LEVEL_LOW) ||
 	    (level == 1 && bank->irq_type[d->hwirq] == IRQ_TYPE_LEVEL_HIGH))
 		irq_chip_retrigger_hierarchy(d);
@@ -358,6 +365,7 @@ static int stm32_gpio_irq_request_resources(struct irq_data *irq_data)
 {
 	struct stm32_gpio_bank *bank = irq_data->domain->host_data;
 	struct stm32_pinctrl *pctl = dev_get_drvdata(bank->gpio_chip.parent);
+	unsigned long flags;
 	int ret;
 
 	ret = stm32_gpio_direction_input(&bank->gpio_chip, irq_data->hwirq);
@@ -371,6 +379,10 @@ static int stm32_gpio_irq_request_resources(struct irq_data *irq_data)
 		return ret;
 	}
 
+	flags = irqd_get_trigger_type(irq_data);
+	if (flags & IRQ_TYPE_LEVEL_MASK)
+		clk_enable(bank->clk);
+
 	return 0;
 }
 
@@ -378,6 +390,9 @@ static void stm32_gpio_irq_release_resources(struct irq_data *irq_data)
 {
 	struct stm32_gpio_bank *bank = irq_data->domain->host_data;
 
+	if (bank->irq_type[irq_data->hwirq] & IRQ_TYPE_LEVEL_MASK)
+		clk_disable(bank->clk);
+
 	gpiochip_unlock_as_irq(&bank->gpio_chip, irq_data->hwirq);
 }
 
-- 
2.35.1

[PATCH 5.10 069/129] tcp: ensure to use the most recently sent skb when filling the rate sample

[Greg Kroah-Hartman]

From: Pengcheng Yang <yangpc@wangsu.com>

[ Upstream commit b253a0680ceadc5d7b4acca7aa2d870326cad8ad ]

If an ACK (s)acks multiple skbs, we favor the information
from the most recently sent skb by choosing the skb with
the highest prior_delivered count. But in the interval
between receiving ACKs, we send multiple skbs with the same
prior_delivered, because the tp->delivered only changes
when we receive an ACK.

We used RACK's solution, copying tcp_rack_sent_after() as
tcp_skb_sent_after() helper to determine "which packet was
sent last?". Later, we will use tcp_skb_sent_after() instead
in RACK.

Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1650422081-22153-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/tcp.h   |  6 ++++++
 net/ipv4/tcp_rate.c | 11 ++++++++---
 2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/include/net/tcp.h b/include/net/tcp.h
index 334b8d1b5442..c74befd89ee9 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1041,6 +1041,7 @@ struct rate_sample {
 	int  losses;		/* number of packets marked lost upon ACK */
 	u32  acked_sacked;	/* number of packets newly (S)ACKed upon ACK */
 	u32  prior_in_flight;	/* in flight before this ACK */
+	u32  last_end_seq;	/* end_seq of most recently ACKed packet */
 	bool is_app_limited;	/* is sample from packet with bubble in pipe? */
 	bool is_retrans;	/* is sample from retransmission? */
 	bool is_ack_delayed;	/* is this (likely) a delayed ACK? */
@@ -1151,6 +1152,11 @@ void tcp_rate_gen(struct sock *sk, u32 delivered, u32 lost,
 		  bool is_sack_reneg, struct rate_sample *rs);
 void tcp_rate_check_app_limited(struct sock *sk);
 
+static inline bool tcp_skb_sent_after(u64 t1, u64 t2, u32 seq1, u32 seq2)
+{
+	return t1 > t2 || (t1 == t2 && after(seq1, seq2));
+}
+
 /* These functions determine how the current flow behaves in respect of SACK
  * handling. SACK is negotiated with the peer, and therefore it can vary
  * between different flows.
diff --git a/net/ipv4/tcp_rate.c b/net/ipv4/tcp_rate.c
index 0de693565963..6ab197928abb 100644
--- a/net/ipv4/tcp_rate.c
+++ b/net/ipv4/tcp_rate.c
@@ -73,26 +73,31 @@ void tcp_rate_skb_sent(struct sock *sk, struct sk_buff *skb)
  *
  * If an ACK (s)acks multiple skbs (e.g., stretched-acks), this function is
  * called multiple times. We favor the information from the most recently
- * sent skb, i.e., the skb with the highest prior_delivered count.
+ * sent skb, i.e., the skb with the most recently sent time and the highest
+ * sequence.
  */
 void tcp_rate_skb_delivered(struct sock *sk, struct sk_buff *skb,
 			    struct rate_sample *rs)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct tcp_skb_cb *scb = TCP_SKB_CB(skb);
+	u64 tx_tstamp;
 
 	if (!scb->tx.delivered_mstamp)
 		return;
 
+	tx_tstamp = tcp_skb_timestamp_us(skb);
 	if (!rs->prior_delivered ||
-	    after(scb->tx.delivered, rs->prior_delivered)) {
+	    tcp_skb_sent_after(tx_tstamp, tp->first_tx_mstamp,
+			       scb->end_seq, rs->last_end_seq)) {
 		rs->prior_delivered  = scb->tx.delivered;
 		rs->prior_mstamp     = scb->tx.delivered_mstamp;
 		rs->is_app_limited   = scb->tx.is_app_limited;
 		rs->is_retrans	     = scb->sacked & TCPCB_RETRANS;
+		rs->last_end_seq     = scb->end_seq;
 
 		/* Record send time of most recently ACKed packet: */
-		tp->first_tx_mstamp  = tcp_skb_timestamp_us(skb);
+		tp->first_tx_mstamp  = tx_tstamp;
 		/* Find the duration of the "send phase" of this window: */
 		rs->interval_us = tcp_stamp_us_delta(tp->first_tx_mstamp,
 						     scb->tx.first_tx_mstamp);
-- 
2.35.1

[PATCH 5.10 070/129] wireguard: device: check for metadata_dst with skb_valid_dst()

[Greg Kroah-Hartman]

From: Nikolay Aleksandrov <razor@blackwall.org>

[ Upstream commit 45ac774c33d834fe9d4de06ab5f1022fe8cd2071 ]

When we try to transmit an skb with md_dst attached through wireguard
we hit a null pointer dereference in wg_xmit() due to the use of
dst_mtu() which calls into dst_blackhole_mtu() which in turn tries to
dereference dst->dev.

Since wireguard doesn't use md_dsts we should use skb_valid_dst(), which
checks for DST_METADATA flag, and if it's set, then falls back to
wireguard's device mtu. That gives us the best chance of transmitting
the packet; otherwise if the blackhole netdev is used we'd get
ETH_MIN_MTU.

 [  263.693506] BUG: kernel NULL pointer dereference, address: 00000000000000e0
 [  263.693908] #PF: supervisor read access in kernel mode
 [  263.694174] #PF: error_code(0x0000) - not-present page
 [  263.694424] PGD 0 P4D 0
 [  263.694653] Oops: 0000 [#1] PREEMPT SMP NOPTI
 [  263.694876] CPU: 5 PID: 951 Comm: mausezahn Kdump: loaded Not tainted 5.18.0-rc1+ #522
 [  263.695190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014
 [  263.695529] RIP: 0010:dst_blackhole_mtu+0x17/0x20
 [  263.695770] Code: 00 00 00 0f 1f 44 00 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 47 10 48 83 e0 fc 8b 40 04 85 c0 75 09 48 8b 07 <8b> 80 e0 00 00 00 c3 66 90 0f 1f 44 00 00 48 89 d7 be 01 00 00 00
 [  263.696339] RSP: 0018:ffffa4a4422fbb28 EFLAGS: 00010246
 [  263.696600] RAX: 0000000000000000 RBX: ffff8ac9c3553000 RCX: 0000000000000000
 [  263.696891] RDX: 0000000000000401 RSI: 00000000fffffe01 RDI: ffffc4a43fb48900
 [  263.697178] RBP: ffffa4a4422fbb90 R08: ffffffff9622635e R09: 0000000000000002
 [  263.697469] R10: ffffffff9b69a6c0 R11: ffffa4a4422fbd0c R12: ffff8ac9d18b1a00
 [  263.697766] R13: ffff8ac9d0ce1840 R14: ffff8ac9d18b1a00 R15: ffff8ac9c3553000
 [  263.698054] FS:  00007f3704c337c0(0000) GS:ffff8acaebf40000(0000) knlGS:0000000000000000
 [  263.698470] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [  263.698826] CR2: 00000000000000e0 CR3: 0000000117a5c000 CR4: 00000000000006e0
 [  263.699214] Call Trace:
 [  263.699505]  <TASK>
 [  263.699759]  wg_xmit+0x411/0x450
 [  263.700059]  ? bpf_skb_set_tunnel_key+0x46/0x2d0
 [   263.700382]  ? dev_queue_xmit_nit+0x31/0x2b0
 [  263.700719]  dev_hard_start_xmit+0xd9/0x220
 [  263.701047]  __dev_queue_xmit+0x8b9/0xd30
 [  263.701344]  __bpf_redirect+0x1a4/0x380
 [  263.701664]  __dev_queue_xmit+0x83b/0xd30
 [  263.701961]  ? packet_parse_headers+0xb4/0xf0
 [  263.702275]  packet_sendmsg+0x9a8/0x16a0
 [  263.702596]  ? _raw_spin_unlock_irqrestore+0x23/0x40
 [  263.702933]  sock_sendmsg+0x5e/0x60
 [  263.703239]  __sys_sendto+0xf0/0x160
 [  263.703549]  __x64_sys_sendto+0x20/0x30
 [  263.703853]  do_syscall_64+0x3b/0x90
 [  263.704162]  entry_SYSCALL_64_after_hwframe+0x44/0xae
 [  263.704494] RIP: 0033:0x7f3704d50506
 [  263.704789] Code: 48 c7 c0 ff ff ff ff eb b7 66 2e 0f 1f 84 00 00 00 00 00 90 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89
 [  263.705652] RSP: 002b:00007ffe954b0b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
 [  263.706141] RAX: ffffffffffffffda RBX: 0000558bb259b490 RCX: 00007f3704d50506
 [  263.706544] RDX: 000000000000004a RSI: 0000558bb259b7b2 RDI: 0000000000000003
 [  263.706952] RBP: 0000000000000000 R08: 00007ffe954b0b90 R09: 0000000000000014
 [  263.707339] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe954b0b90
 [  263.707735] R13: 000000000000004a R14: 0000558bb259b7b2 R15: 0000000000000001
 [  263.708132]  </TASK>
 [  263.708398] Modules linked in: bridge netconsole bonding [last unloaded: bridge]
 [  263.708942] CR2: 00000000000000e0

Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Link: https://github.com/cilium/cilium/issues/19428
Reported-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireguard/device.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireguard/device.c b/drivers/net/wireguard/device.c
index e189eb95678d..e0693cd965ec 100644
--- a/drivers/net/wireguard/device.c
+++ b/drivers/net/wireguard/device.c
@@ -19,6 +19,7 @@
 #include <linux/if_arp.h>
 #include <linux/icmp.h>
 #include <linux/suspend.h>
+#include <net/dst_metadata.h>
 #include <net/icmp.h>
 #include <net/rtnetlink.h>
 #include <net/ip_tunnels.h>
@@ -152,7 +153,7 @@ static netdev_tx_t wg_xmit(struct sk_buff *skb, struct net_device *dev)
 		goto err_peer;
 	}
 
-	mtu = skb_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu;
+	mtu = skb_valid_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu;
 
 	__skb_queue_head_init(&packets);
 	if (!skb_is_gso(skb)) {
-- 
2.35.1

[PATCH 5.10 071/129] sctp: check asoc strreset_chunk in sctp_generate_reconf_event

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 165e3e17fe8fe6a8aab319bc6e631a2e23b9a857 ]

A null pointer reference issue can be triggered when the response of a
stream reconf request arrives after the timer is triggered, such as:

  send Incoming SSN Reset Request --->
  CPU0:
   reconf timer is triggered,
   go to the handler code before hold sk lock
                            <--- reply with Outgoing SSN Reset Request
  CPU1:
   process Outgoing SSN Reset Request,
   and set asoc->strreset_chunk to NULL
  CPU0:
   continue the handler code, hold sk lock,
   and try to hold asoc->strreset_chunk, crash!

In Ying Xu's testing, the call trace is:

  [ ] BUG: kernel NULL pointer dereference, address: 0000000000000010
  [ ] RIP: 0010:sctp_chunk_hold+0xe/0x40 [sctp]
  [ ] Call Trace:
  [ ]  <IRQ>
  [ ]  sctp_sf_send_reconf+0x2c/0x100 [sctp]
  [ ]  sctp_do_sm+0xa4/0x220 [sctp]
  [ ]  sctp_generate_reconf_event+0xbd/0xe0 [sctp]
  [ ]  call_timer_fn+0x26/0x130

This patch is to fix it by returning from the timer handler if asoc
strreset_chunk is already set to NULL.

Fixes: 7b9438de0cd4 ("sctp: add stream reconf timer")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sctp/sm_sideeffect.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 0948f14ce221..d4e5969771f0 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -458,6 +458,10 @@ void sctp_generate_reconf_event(struct timer_list *t)
 		goto out_unlock;
 	}
 
+	/* This happens when the response arrives after the timer is triggered. */
+	if (!asoc->strreset_chunk)
+		goto out_unlock;
+
 	error = sctp_do_sm(net, SCTP_EVENT_T_TIMEOUT,
 			   SCTP_ST_TIMEOUT(SCTP_EVENT_TIMEOUT_RECONF),
 			   asoc->state, asoc->ep, asoc,
-- 
2.35.1

[PATCH 5.10 072/129] ARM: dts: imx6ull-colibri: fix vqmmc regulator

[Greg Kroah-Hartman]

From: Max Krummenacher <max.krummenacher@toradex.com>

[ Upstream commit 45974e4276a8d6653394f66666fc57d8ffa6de9a ]

The correct spelling for the property is gpios. Otherwise, the regulator
will neither reserve nor control any GPIOs. Thus, any SD/MMC card which
can use UHS-I modes will fail.

Fixes: c2e4987e0e02 ("ARM: dts: imx6ull: add Toradex Colibri iMX6ULL support")
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6ull-colibri.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 4436556624d6..548cfcc7a01d 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -37,7 +37,7 @@ reg_module_3v3_avdd: regulator-module-3v3-avdd {
 
 	reg_sd1_vmmc: regulator-sd1-vmmc {
 		compatible = "regulator-gpio";
-		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_snvs_reg_sd>;
 		regulator-always-on;
-- 
2.35.1

[PATCH 5.10 073/129] arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock

[Greg Kroah-Hartman]

From: Fabio Estevam <festevam@denx.de>

[ Upstream commit 0310b5aa0656a94102344f1e9ae2892e342a665d ]

The ROHM BD71847 PMIC has a 32.768 kHz clock.

Describe the PMIC clock to fix the following boot errors:

bd718xx-clk bd71847-clk.1.auto: No parent clk found
bd718xx-clk: probe of bd71847-clk.1.auto failed with error -22

Based on the same fix done for imx8mm-evk as per commit
a6a355ede574 ("arm64: dts: imx8mm-evk: Add 32.768 kHz clock to PMIC")

Fixes: 3e44dd09736d ("arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index 7dfee715a2c4..d8ce217c6016 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -59,6 +59,10 @@ pmic@4b {
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		rohm,reset-snvs-powered;
 
+		#clock-cells = <0>;
+		clocks = <&osc_32k 0>;
+		clock-output-names = "clk-32k-out";
+
 		regulators {
 			buck1_reg: BUCK1 {
 				regulator-name = "buck1";
-- 
2.35.1

[PATCH 5.10 074/129] pinctrl: pistachio: fix use of irq_of_parse_and_map()

[Greg Kroah-Hartman]

From: Lv Ruyi <lv.ruyi@zte.com.cn>

[ Upstream commit 0c9843a74a85224a89daa81fa66891dae2f930e1 ]

The irq_of_parse_and_map() function returns 0 on failure, and does not
return an negative value.

Fixes: cefc03e5995e ("pinctrl: Add Pistachio SoC pin control driver")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Link: https://lore.kernel.org/r/20220424031430.3170759-1-lv.ruyi@zte.com.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-pistachio.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-pistachio.c b/drivers/pinctrl/pinctrl-pistachio.c
index ec761ba2a2da..989a37fb402d 100644
--- a/drivers/pinctrl/pinctrl-pistachio.c
+++ b/drivers/pinctrl/pinctrl-pistachio.c
@@ -1374,10 +1374,10 @@ static int pistachio_gpio_register(struct pistachio_pinctrl *pctl)
 		}
 
 		irq = irq_of_parse_and_map(child, 0);
-		if (irq < 0) {
-			dev_err(pctl->dev, "No IRQ for bank %u: %d\n", i, irq);
+		if (!irq) {
+			dev_err(pctl->dev, "No IRQ for bank %u\n", i);
 			of_node_put(child);
-			ret = irq;
+			ret = -EINVAL;
 			goto err;
 		}
 
-- 
2.35.1

[PATCH 5.10 075/129] cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe

[Greg Kroah-Hartman]

From: Xiaobing Luo <luoxiaobing0926@gmail.com>

[ Upstream commit 1aa24a8f3b5133dae4bc1e57427e345445f3e902 ]

--------------------------------------------
unreferenced object 0xffff000010742a00 (size 128):
  comm "swapper/0", pid 1, jiffies 4294902015 (age 1187.652s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000b4dfebaa>] __kmalloc+0x338/0x474
    [<00000000d6e716db>] sun50i_cpufreq_nvmem_probe+0xc4/0x36c
    [<000000007d6082a0>] platform_probe+0x98/0x11c
    [<00000000c990f549>] really_probe+0x234/0x5a0
    [<000000002d9fecc6>] __driver_probe_device+0x194/0x224
    [<00000000cf0b94fa>] driver_probe_device+0x64/0x13c
    [<00000000f238e4cf>] __device_attach_driver+0xf8/0x180
    [<000000006720e418>] bus_for_each_drv+0xf8/0x160
    [<00000000df4f14f6>] __device_attach+0x174/0x29c
    [<00000000782002fb>] device_initial_probe+0x20/0x30
    [<00000000c2681b06>] bus_probe_device+0xfc/0x110
    [<00000000964cf3bd>] device_add+0x5f0/0xcd0
    [<000000004b9264e3>] platform_device_add+0x198/0x390
    [<00000000fa82a9d0>] platform_device_register_full+0x178/0x210
    [<000000009a5daf13>] sun50i_cpufreq_init+0xf8/0x168
    [<000000000377cc7c>] do_one_initcall+0xe4/0x570
--------------------------------------------

if sun50i_cpufreq_get_efuse failed, then opp_tables leak.

Fixes: f328584f7bff ("cpufreq: Add sun50i nvmem based CPU scaling driver")
Signed-off-by: Xiaobing Luo <luoxiaobing0926@gmail.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/sun50i-cpufreq-nvmem.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/cpufreq/sun50i-cpufreq-nvmem.c b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
index 2deed8d8773f..75e1bf3a08f7 100644
--- a/drivers/cpufreq/sun50i-cpufreq-nvmem.c
+++ b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
@@ -98,8 +98,10 @@ static int sun50i_cpufreq_nvmem_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	ret = sun50i_cpufreq_get_efuse(&speed);
-	if (ret)
+	if (ret) {
+		kfree(opp_tables);
 		return ret;
+	}
 
 	snprintf(name, MAX_NAME_LEN, "speed%d", speed);
 
-- 
2.35.1

[PATCH 5.10 076/129] net: hns3: modify the return code of hclge_get_ring_chain_from_mbx

[Greg Kroah-Hartman]

From: Jie Wang <wangjie125@huawei.com>

[ Upstream commit 48009e9972974c52a5f649f761862dd67bce3d13 ]

Currently, function hclge_get_ring_chain_from_mbx will return -ENOMEM if
ring_num is bigger than HCLGE_MBX_MAX_RING_CHAIN_PARAM_NUM. It is better to
return -EINVAL for the invalid parameter case.

So this patch fixes it by return -EINVAL in this abnormal branch.

Fixes: 5d02a58dae60 ("net: hns3: fix for buffer overflow smatch warning")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index 5d3996767256..2ea347b822db 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -173,7 +173,7 @@ static int hclge_get_ring_chain_from_mbx(
 	ring_num = req->msg.ring_num;
 
 	if (ring_num > HCLGE_MBX_MAX_RING_CHAIN_PARAM_NUM)
-		return -ENOMEM;
+		return -EINVAL;
 
 	for (i = 0; i < ring_num; i++) {
 		if (req->msg.param[i].tqp_index >= vport->nic.kinfo.rss_size) {
-- 
2.35.1

[PATCH 5.10 077/129] net: hns3: add validity check for message data length

[Greg Kroah-Hartman]

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit 7d413735cb18ff73aaba3457b16b08332e8d3cc4 ]

Add validity check for message data length in function
hclge_send_mbx_msg(), avoid unexpected overflow.

Fixes: dde1a86e93ca ("net: hns3: Add mailbox support to PF driver")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index 2ea347b822db..b948fe3ac56b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -91,6 +91,13 @@ static int hclge_send_mbx_msg(struct hclge_vport *vport, u8 *msg, u16 msg_len,
 	enum hclge_cmd_status status;
 	struct hclge_desc desc;
 
+	if (msg_len > HCLGE_MBX_MAX_MSG_SIZE) {
+		dev_err(&hdev->pdev->dev,
+			"msg data length(=%u) exceeds maximum(=%u)\n",
+			msg_len, HCLGE_MBX_MAX_MSG_SIZE);
+		return -EMSGSIZE;
+	}
+
 	resp_pf_to_vf = (struct hclge_mbx_pf_to_vf_cmd *)desc.data;
 
 	hclge_cmd_setup_basic_desc(&desc, HCLGEVF_OPC_MBX_PF_TO_VF, false);
-- 
2.35.1

[PATCH 5.10 078/129] net: hns3: add return value for mailbox handling in PF

[Greg Kroah-Hartman]

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit c59d606296842409a6e5a4828235b0bd46b12bc4 ]

Currently, there are some querying mailboxes sent from VF to PF,
and VF will wait the PF's handling result. For mailbox
HCLGE_MBX_GET_QID_IN_PF and HCLGE_MBX_GET_RSS_KEY, it may fail
when the input parameter is invalid, but the prototype of their
handler function is void. In this case, PF always return success
to VF, which may cause the VF get incorrect result.

Fixes it by adding return value for these function.

Fixes: 63b1279d9905 ("net: hns3: check queue id range before using")
Fixes: 532cfc0df1e4 ("net: hns3: add a check for index in hclge_get_rss_key()")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../hisilicon/hns3/hns3pf/hclge_mbx.c         | 22 ++++++++++---------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index b948fe3ac56b..51b7b46f2f30 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -584,9 +584,9 @@ static int hclge_set_vf_mtu(struct hclge_vport *vport,
 	return hclge_set_vport_mtu(vport, mtu);
 }
 
-static void hclge_get_queue_id_in_pf(struct hclge_vport *vport,
-				     struct hclge_mbx_vf_to_pf_cmd *mbx_req,
-				     struct hclge_respond_to_vf_msg *resp_msg)
+static int hclge_get_queue_id_in_pf(struct hclge_vport *vport,
+				    struct hclge_mbx_vf_to_pf_cmd *mbx_req,
+				    struct hclge_respond_to_vf_msg *resp_msg)
 {
 	struct hnae3_handle *handle = &vport->nic;
 	struct hclge_dev *hdev = vport->back;
@@ -596,17 +596,18 @@ static void hclge_get_queue_id_in_pf(struct hclge_vport *vport,
 	if (queue_id >= handle->kinfo.num_tqps) {
 		dev_err(&hdev->pdev->dev, "Invalid queue id(%u) from VF %u\n",
 			queue_id, mbx_req->mbx_src_vfid);
-		return;
+		return -EINVAL;
 	}
 
 	qid_in_pf = hclge_covert_handle_qid_global(&vport->nic, queue_id);
 	memcpy(resp_msg->data, &qid_in_pf, sizeof(qid_in_pf));
 	resp_msg->len = sizeof(qid_in_pf);
+	return 0;
 }
 
-static void hclge_get_rss_key(struct hclge_vport *vport,
-			      struct hclge_mbx_vf_to_pf_cmd *mbx_req,
-			      struct hclge_respond_to_vf_msg *resp_msg)
+static int hclge_get_rss_key(struct hclge_vport *vport,
+			     struct hclge_mbx_vf_to_pf_cmd *mbx_req,
+			     struct hclge_respond_to_vf_msg *resp_msg)
 {
 #define HCLGE_RSS_MBX_RESP_LEN	8
 	struct hclge_dev *hdev = vport->back;
@@ -622,13 +623,14 @@ static void hclge_get_rss_key(struct hclge_vport *vport,
 		dev_warn(&hdev->pdev->dev,
 			 "failed to get the rss hash key, the index(%u) invalid !\n",
 			 index);
-		return;
+		return -EINVAL;
 	}
 
 	memcpy(resp_msg->data,
 	       &hdev->vport[0].rss_hash_key[index * HCLGE_RSS_MBX_RESP_LEN],
 	       HCLGE_RSS_MBX_RESP_LEN);
 	resp_msg->len = HCLGE_RSS_MBX_RESP_LEN;
+	return 0;
 }
 
 static void hclge_link_fail_parse(struct hclge_dev *hdev, u8 link_fail_code)
@@ -807,10 +809,10 @@ void hclge_mbx_handler(struct hclge_dev *hdev)
 					"VF fail(%d) to set mtu\n", ret);
 			break;
 		case HCLGE_MBX_GET_QID_IN_PF:
-			hclge_get_queue_id_in_pf(vport, req, &resp_msg);
+			ret = hclge_get_queue_id_in_pf(vport, req, &resp_msg);
 			break;
 		case HCLGE_MBX_GET_RSS_KEY:
-			hclge_get_rss_key(vport, req, &resp_msg);
+			ret = hclge_get_rss_key(vport, req, &resp_msg);
 			break;
 		case HCLGE_MBX_GET_LINK_MODE:
 			hclge_get_link_mode(vport, req);
-- 
2.35.1

[PATCH 5.10 079/129] net/smc: sync err code when tcp connection was refused

[Greg Kroah-Hartman]

From: liuyacan <liuyacan@corp.netease.com>

[ Upstream commit 4e2e65e2e56c6ceb4ea1719360080c0af083229e ]

In the current implementation, when TCP initiates a connection
to an unavailable [ip,port], ECONNREFUSED will be stored in the
TCP socket, but SMC will not. However, some apps (like curl) use
getsockopt(,,SO_ERROR,,) to get the error information, which makes
them miss the error message and behave strangely.

Fixes: 50717a37db03 ("net/smc: nonblocking connect rework")
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/smc/af_smc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index 1b98f3241150..35db3260e8d5 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -1057,6 +1057,8 @@ static void smc_connect_work(struct work_struct *work)
 		smc->sk.sk_state = SMC_CLOSED;
 		if (rc == -EPIPE || rc == -EAGAIN)
 			smc->sk.sk_err = EPIPE;
+		else if (rc == -ECONNREFUSED)
+			smc->sk.sk_err = ECONNREFUSED;
 		else if (signal_pending(current))
 			smc->sk.sk_err = -sock_intr_errno(timeo);
 		sock_put(&smc->sk); /* passive closing */
-- 
2.35.1

[PATCH 5.10 080/129] ip_gre: Make o_seqno start from 0 in native mode

[Greg Kroah-Hartman]

From: Peilin Ye <peilin.ye@bytedance.com>

[ Upstream commit ff827beb706ed719c766acf36449801ded0c17fc ]

For GRE and GRETAP devices, currently o_seqno starts from 1 in native
mode.  According to RFC 2890 2.2., "The first datagram is sent with a
sequence number of 0."  Fix it.

It is worth mentioning that o_seqno already starts from 0 in collect_md
mode, see gre_fb_xmit(), where tunnel->o_seqno is passed to
gre_build_header() before getting incremented.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ip_gre.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index e4504dd510c6..801c540db33e 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -454,14 +454,12 @@ static void __gre_xmit(struct sk_buff *skb, struct net_device *dev,
 		       __be16 proto)
 {
 	struct ip_tunnel *tunnel = netdev_priv(dev);
-
-	if (tunnel->parms.o_flags & TUNNEL_SEQ)
-		tunnel->o_seqno++;
+	__be16 flags = tunnel->parms.o_flags;
 
 	/* Push GRE header. */
 	gre_build_header(skb, tunnel->tun_hlen,
-			 tunnel->parms.o_flags, proto, tunnel->parms.o_key,
-			 htonl(tunnel->o_seqno));
+			 flags, proto, tunnel->parms.o_key,
+			 (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0);
 
 	ip_tunnel_xmit(skb, dev, tnl_params, tnl_params->protocol);
 }
-- 
2.35.1

[PATCH 5.10 081/129] ip6_gre: Make o_seqno start from 0 in native mode

[Greg Kroah-Hartman]

From: Peilin Ye <peilin.ye@bytedance.com>

[ Upstream commit fde98ae91f79cab4e020f40c35ed23cbdc59661c ]

For IP6GRE and IP6GRETAP devices, currently o_seqno starts from 1 in
native mode.  According to RFC 2890 2.2., "The first datagram is sent
with a sequence number of 0."  Fix it.

It is worth mentioning that o_seqno already starts from 0 in collect_md
mode, see the "if (tunnel->parms.collect_md)" clause in __gre6_xmit(),
where tunnel->o_seqno is passed to gre_build_header() before getting
incremented.

Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/ip6_gre.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c
index 1f6c752f13b4..09262adf004e 100644
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -724,6 +724,7 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
 {
 	struct ip6_tnl *tunnel = netdev_priv(dev);
 	__be16 protocol;
+	__be16 flags;
 
 	if (dev->type == ARPHRD_ETHER)
 		IPCB(skb)->flags = 0;
@@ -739,7 +740,6 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
 	if (tunnel->parms.collect_md) {
 		struct ip_tunnel_info *tun_info;
 		const struct ip_tunnel_key *key;
-		__be16 flags;
 		int tun_hlen;
 
 		tun_info = skb_tunnel_info_txcheck(skb);
@@ -770,15 +770,14 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
 						      : 0);
 
 	} else {
-		if (tunnel->parms.o_flags & TUNNEL_SEQ)
-			tunnel->o_seqno++;
-
 		if (skb_cow_head(skb, dev->needed_headroom ?: tunnel->hlen))
 			return -ENOMEM;
 
-		gre_build_header(skb, tunnel->tun_hlen, tunnel->parms.o_flags,
+		flags = tunnel->parms.o_flags;
+
+		gre_build_header(skb, tunnel->tun_hlen, flags,
 				 protocol, tunnel->parms.o_key,
-				 htonl(tunnel->o_seqno));
+				 (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0);
 	}
 
 	return ip6_tnl_xmit(skb, dev, dsfield, fl6, encap_limit, pmtu,
-- 
2.35.1

[PATCH 5.10 082/129] ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md mode

[Greg Kroah-Hartman]

From: Peilin Ye <peilin.ye@bytedance.com>

[ Upstream commit 31c417c948d7f6909cb63f0ac3298f3c38f8ce20 ]

As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in
collect_md mode is racy for [IP6]GRE[TAP] devices.  Consider the
following sequence of events:

1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link
   add ... external".  "ip" ignores "[o]seq" if "external" is specified,
   so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e.
   it uses lockless TX);
2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g.
   bpf_skb_set_tunnel_key() in an eBPF program attached to this device;
3. gre_fb_xmit() or __gre6_xmit() processes these skb's:

	gre_build_header(skb, tun_hlen,
			 flags, protocol,
			 tunnel_id_to_key32(tun_info->key.tun_id),
			 (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++)
					      : 0);   ^^^^^^^^^^^^^^^^^

Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may
try to do this tunnel->o_seqno++ in parallel, which is racy.  Fix it by
making o_seqno atomic_t.

As mentioned by Eric Dumazet in commit b790e01aee74 ("ip_gre: lockless
xmit"), making o_seqno atomic_t increases "chance for packets being out
of order at receiver" when NETIF_F_LLTX is on.

Maybe a better fix would be:

1. Do not ignore "oseq" in external mode.  Users MUST specify "oseq" if
   they want the kernel to allow sequencing of outgoing packets;
2. Reject all outgoing TUNNEL_SEQ packets if the device was not created
   with "oseq".

Unfortunately, that would break userspace.

We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us
do it in separate patches to keep this fix minimal.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 77a5196a804e ("gre: add sequence number for collect md mode.")
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/ip6_tunnel.h | 2 +-
 include/net/ip_tunnels.h | 2 +-
 net/ipv4/ip_gre.c        | 6 +++---
 net/ipv6/ip6_gre.c       | 7 ++++---
 4 files changed, 9 insertions(+), 8 deletions(-)

diff --git a/include/net/ip6_tunnel.h b/include/net/ip6_tunnel.h
index 028eaea1c854..42d50856fcf2 100644
--- a/include/net/ip6_tunnel.h
+++ b/include/net/ip6_tunnel.h
@@ -57,7 +57,7 @@ struct ip6_tnl {
 
 	/* These fields used only by GRE */
 	__u32 i_seqno;	/* The last seen seqno	*/
-	__u32 o_seqno;	/* The last output seqno */
+	atomic_t o_seqno;	/* The last output seqno */
 	int hlen;       /* tun_hlen + encap_hlen */
 	int tun_hlen;	/* Precalculated header length */
 	int encap_hlen; /* Encap header length (FOU,GUE) */
diff --git a/include/net/ip_tunnels.h b/include/net/ip_tunnels.h
index 61620677b034..c3e55a9ae585 100644
--- a/include/net/ip_tunnels.h
+++ b/include/net/ip_tunnels.h
@@ -113,7 +113,7 @@ struct ip_tunnel {
 
 	/* These four fields used only by GRE */
 	u32		i_seqno;	/* The last seen seqno	*/
-	u32		o_seqno;	/* The last output seqno */
+	atomic_t	o_seqno;	/* The last output seqno */
 	int		tun_hlen;	/* Precalculated header length */
 
 	/* These four fields used only by ERSPAN */
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 801c540db33e..2a80038575d2 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -459,7 +459,7 @@ static void __gre_xmit(struct sk_buff *skb, struct net_device *dev,
 	/* Push GRE header. */
 	gre_build_header(skb, tunnel->tun_hlen,
 			 flags, proto, tunnel->parms.o_key,
-			 (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0);
+			 (flags & TUNNEL_SEQ) ? htonl(atomic_fetch_inc(&tunnel->o_seqno)) : 0);
 
 	ip_tunnel_xmit(skb, dev, tnl_params, tnl_params->protocol);
 }
@@ -497,7 +497,7 @@ static void gre_fb_xmit(struct sk_buff *skb, struct net_device *dev,
 		(TUNNEL_CSUM | TUNNEL_KEY | TUNNEL_SEQ);
 	gre_build_header(skb, tunnel_hlen, flags, proto,
 			 tunnel_id_to_key32(tun_info->key.tun_id),
-			 (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0);
+			 (flags & TUNNEL_SEQ) ? htonl(atomic_fetch_inc(&tunnel->o_seqno)) : 0);
 
 	ip_md_tunnel_xmit(skb, dev, IPPROTO_GRE, tunnel_hlen);
 
@@ -574,7 +574,7 @@ static void erspan_fb_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	gre_build_header(skb, 8, TUNNEL_SEQ,
-			 proto, 0, htonl(tunnel->o_seqno++));
+			 proto, 0, htonl(atomic_fetch_inc(&tunnel->o_seqno)));
 
 	ip_md_tunnel_xmit(skb, dev, IPPROTO_GRE, tunnel_hlen);
 
diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c
index 09262adf004e..3f88ba6555ab 100644
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -766,7 +766,7 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
 		gre_build_header(skb, tun_hlen,
 				 flags, protocol,
 				 tunnel_id_to_key32(tun_info->key.tun_id),
-				 (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++)
+				 (flags & TUNNEL_SEQ) ? htonl(atomic_fetch_inc(&tunnel->o_seqno))
 						      : 0);
 
 	} else {
@@ -777,7 +777,8 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
 
 		gre_build_header(skb, tunnel->tun_hlen, flags,
 				 protocol, tunnel->parms.o_key,
-				 (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0);
+				 (flags & TUNNEL_SEQ) ? htonl(atomic_fetch_inc(&tunnel->o_seqno))
+						      : 0);
 	}
 
 	return ip6_tnl_xmit(skb, dev, dsfield, fl6, encap_limit, pmtu,
@@ -1055,7 +1056,7 @@ static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb,
 	/* Push GRE header. */
 	proto = (t->parms.erspan_ver == 1) ? htons(ETH_P_ERSPAN)
 					   : htons(ETH_P_ERSPAN2);
-	gre_build_header(skb, 8, TUNNEL_SEQ, proto, 0, htonl(t->o_seqno++));
+	gre_build_header(skb, 8, TUNNEL_SEQ, proto, 0, htonl(atomic_fetch_inc(&t->o_seqno)));
 
 	/* TooBig packet may have updated dst->dev's mtu */
 	if (!t->parms.collect_md && dst && dst_mtu(dst) > dst->dev->mtu)
-- 
2.35.1

[PATCH 5.10 083/129] tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 4bfe744ff1644fbc0a991a2677dc874475dd6776 ]

I had this bug sitting for too long in my pile, it is time to fix it.

Thanks to Doug Porter for reminding me of it!

We had various attempts in the past, including commit
0cbe6a8f089e ("tcp: remove SOCK_QUEUE_SHRUNK"),
but the issue is that TCP stack currently only generates
EPOLLOUT from input path, when tp->snd_una has advanced
and skb(s) cleaned from rtx queue.

If a flow has a big RTT, and/or receives SACKs, it is possible
that the notsent part (tp->write_seq - tp->snd_nxt) reaches 0
and no more data can be sent until tp->snd_una finally advances.

What is needed is to also check if POLLOUT needs to be generated
whenever tp->snd_nxt is advanced, from output path.

This bug triggers more often after an idle period, as
we do not receive ACK for at least one RTT. tcp_notsent_lowat
could be a fraction of what CWND and pacing rate would allow to
send during this RTT.

In a followup patch, I will remove the bogus call
to tcp_chrono_stop(sk, TCP_CHRONO_SNDBUF_LIMITED)
from tcp_check_space(). Fact that we have decided to generate
an EPOLLOUT does not mean the application has immediately
refilled the transmit queue. This optimistic call
might have been the reason the bug seemed not too serious.

Tested:

200 ms rtt, 1% packet loss, 32 MB tcp_rmem[2] and tcp_wmem[2]

$ echo 500000 >/proc/sys/net/ipv4/tcp_notsent_lowat
$ cat bench_rr.sh
SUM=0
for i in {1..10}
do
 V=`netperf -H remote_host -l30 -t TCP_RR -- -r 10000000,10000 -o LOCAL_BYTES_SENT | egrep -v "MIGRATED|Bytes"`
 echo $V
 SUM=$(($SUM + $V))
done
echo SUM=$SUM

Before patch:
$ bench_rr.sh
130000000
80000000
140000000
140000000
140000000
140000000
130000000
40000000
90000000
110000000
SUM=1140000000

After patch:
$ bench_rr.sh
430000000
590000000
530000000
450000000
450000000
350000000
450000000
490000000
480000000
460000000
SUM=4680000000  # This is 410 % of the value before patch.

Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Doug Porter <dsp@fb.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/tcp.h     |  1 +
 net/ipv4/tcp_input.c  | 12 +++++++++++-
 net/ipv4/tcp_output.c |  1 +
 3 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/include/net/tcp.h b/include/net/tcp.h
index c74befd89ee9..263f6eb417d5 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -598,6 +598,7 @@ void tcp_synack_rtt_meas(struct sock *sk, struct request_sock *req);
 void tcp_reset(struct sock *sk);
 void tcp_skb_mark_lost_uncond_verify(struct tcp_sock *tp, struct sk_buff *skb);
 void tcp_fin(struct sock *sk);
+void tcp_check_space(struct sock *sk);
 
 /* tcp_timer.c */
 void tcp_init_xmit_timers(struct sock *);
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 12dd08af12b5..c25a95c74128 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5370,7 +5370,17 @@ static void tcp_new_space(struct sock *sk)
 	sk->sk_write_space(sk);
 }
 
-static void tcp_check_space(struct sock *sk)
+/* Caller made space either from:
+ * 1) Freeing skbs in rtx queues (after tp->snd_una has advanced)
+ * 2) Sent skbs from output queue (and thus advancing tp->snd_nxt)
+ *
+ * We might be able to generate EPOLLOUT to the application if:
+ * 1) Space consumed in output/rtx queues is below sk->sk_sndbuf/2
+ * 2) notsent amount (tp->write_seq - tp->snd_nxt) became
+ *    small enough that tcp_stream_memory_free() decides it
+ *    is time to generate EPOLLOUT.
+ */
+void tcp_check_space(struct sock *sk)
 {
 	/* pairs with tcp_poll() */
 	smp_mb();
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index ce9987e6ff25..e37ad0b3645c 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -82,6 +82,7 @@ static void tcp_event_new_data_sent(struct sock *sk, struct sk_buff *skb)
 
 	NET_ADD_STATS(sock_net(sk), LINUX_MIB_TCPORIGDATASENT,
 		      tcp_skb_pcount(skb));
+	tcp_check_space(sk);
 }
 
 /* SND.NXT, if window was not shrunk or the amount of shrunk was less than one
-- 
2.35.1

[PATCH 5.10 084/129] tcp: make sure treq->af_specific is initialized

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit ba5a4fdd63ae0c575707030db0b634b160baddd7 ]

syzbot complained about a recent change in TCP stack,
hitting a NULL pointer [1]

tcp request sockets have an af_specific pointer, which
was used before the blamed change only for SYNACK generation
in non SYNCOOKIE mode.

tcp requests sockets momentarily created when third packet
coming from client in SYNCOOKIE mode were not using
treq->af_specific.

Make sure this field is populated, in the same way normal
TCP requests sockets do in tcp_conn_request().

[1]
TCP: request_sock_TCPv6: Possible SYN flooding on port 20002. Sending cookies.  Check SNMP counters.
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 3695 Comm: syz-executor864 Not tainted 5.18.0-rc3-syzkaller-00224-g5fd1fe4807f9 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:tcp_create_openreq_child+0xe16/0x16b0 net/ipv4/tcp_minisocks.c:534
Code: 48 c1 ea 03 80 3c 02 00 0f 85 e5 07 00 00 4c 8b b3 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7e 08 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c9 07 00 00 48 8b 3c 24 48 89 de 41 ff 56 08 48
RSP: 0018:ffffc90000de0588 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888076490330 RCX: 0000000000000100
RDX: 0000000000000001 RSI: ffffffff87d67ff0 RDI: 0000000000000008
RBP: ffff88806ee1c7f8 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff87d67f00 R11: 0000000000000000 R12: ffff88806ee1bfc0
R13: ffff88801b0e0368 R14: 0000000000000000 R15: 0000000000000000
FS:  00007f517fe58700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffcead76960 CR3: 000000006f97b000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
 tcp_v6_syn_recv_sock+0x199/0x23b0 net/ipv6/tcp_ipv6.c:1267
 tcp_get_cookie_sock+0xc9/0x850 net/ipv4/syncookies.c:207
 cookie_v6_check+0x15c3/0x2340 net/ipv6/syncookies.c:258
 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1131 [inline]
 tcp_v6_do_rcv+0x1148/0x13b0 net/ipv6/tcp_ipv6.c:1486
 tcp_v6_rcv+0x3305/0x3840 net/ipv6/tcp_ipv6.c:1725
 ip6_protocol_deliver_rcu+0x2e9/0x1900 net/ipv6/ip6_input.c:422
 ip6_input_finish+0x14c/0x2c0 net/ipv6/ip6_input.c:464
 NF_HOOK include/linux/netfilter.h:307 [inline]
 NF_HOOK include/linux/netfilter.h:301 [inline]
 ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:473
 dst_input include/net/dst.h:461 [inline]
 ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 NF_HOOK include/linux/netfilter.h:301 [inline]
 ipv6_rcv+0x27f/0x3b0 net/ipv6/ip6_input.c:297
 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5405
 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5519
 process_backlog+0x3a0/0x7c0 net/core/dev.c:5847
 __napi_poll+0xb3/0x6e0 net/core/dev.c:6413
 napi_poll net/core/dev.c:6480 [inline]
 net_rx_action+0x8ec/0xc60 net/core/dev.c:6567
 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558
 invoke_softirq kernel/softirq.c:432 [inline]
 __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637
 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649
 sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097

Fixes: 5b0b9e4c2c89 ("tcp: md5: incorrect tcp_header_len for incoming connections")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/tcp.h     | 1 +
 net/ipv4/syncookies.c | 8 +++++++-
 net/ipv6/syncookies.c | 3 ++-
 3 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/include/net/tcp.h b/include/net/tcp.h
index 263f6eb417d5..2a28e0925573 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -460,6 +460,7 @@ int __cookie_v4_check(const struct iphdr *iph, const struct tcphdr *th,
 		      u32 cookie);
 struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb);
 struct request_sock *cookie_tcp_reqsk_alloc(const struct request_sock_ops *ops,
+					    const struct tcp_request_sock_ops *af_ops,
 					    struct sock *sk, struct sk_buff *skb);
 #ifdef CONFIG_SYN_COOKIES
 
diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index 00dc3f943c80..0b616094e794 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -283,6 +283,7 @@ bool cookie_ecn_ok(const struct tcp_options_received *tcp_opt,
 EXPORT_SYMBOL(cookie_ecn_ok);
 
 struct request_sock *cookie_tcp_reqsk_alloc(const struct request_sock_ops *ops,
+					    const struct tcp_request_sock_ops *af_ops,
 					    struct sock *sk,
 					    struct sk_buff *skb)
 {
@@ -299,6 +300,10 @@ struct request_sock *cookie_tcp_reqsk_alloc(const struct request_sock_ops *ops,
 		return NULL;
 
 	treq = tcp_rsk(req);
+
+	/* treq->af_specific might be used to perform TCP_MD5 lookup */
+	treq->af_specific = af_ops;
+
 	treq->syn_tos = TCP_SKB_CB(skb)->ip_dsfield;
 #if IS_ENABLED(CONFIG_MPTCP)
 	treq->is_mptcp = sk_is_mptcp(sk);
@@ -366,7 +371,8 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb)
 		goto out;
 
 	ret = NULL;
-	req = cookie_tcp_reqsk_alloc(&tcp_request_sock_ops, sk, skb);
+	req = cookie_tcp_reqsk_alloc(&tcp_request_sock_ops,
+				     &tcp_request_sock_ipv4_ops, sk, skb);
 	if (!req)
 		goto out;
 
diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
index 9b6cae1e49d9..5fa791cf39ca 100644
--- a/net/ipv6/syncookies.c
+++ b/net/ipv6/syncookies.c
@@ -170,7 +170,8 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
 		goto out;
 
 	ret = NULL;
-	req = cookie_tcp_reqsk_alloc(&tcp6_request_sock_ops, sk, skb);
+	req = cookie_tcp_reqsk_alloc(&tcp6_request_sock_ops,
+				     &tcp_request_sock_ipv6_ops, sk, skb);
 	if (!req)
 		goto out;
 
-- 
2.35.1

[PATCH 5.10 085/129] bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit fff8c10368e64e7f8960f149375c12ca5f3b30af ]

This code is really spurious.
It always returns an ERR_PTR, even when err is known to be 0 and calls
put_device() after a successful device_register() call.

It is likely that the return statement in the normal path is missing.
Add 'return rdev;' to fix it.

Fixes: d787dcdb9c8f ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/ef2b9576350bba4c8e05e669e9535e9e2a415763.1650551719.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bus/sunxi-rsb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c
index 1bb00a959c67..9b1a5e62417c 100644
--- a/drivers/bus/sunxi-rsb.c
+++ b/drivers/bus/sunxi-rsb.c
@@ -224,6 +224,8 @@ static struct sunxi_rsb_device *sunxi_rsb_device_create(struct sunxi_rsb *rsb,
 
 	dev_dbg(&rdev->dev, "device %s registered\n", dev_name(&rdev->dev));
 
+	return rdev;
+
 err_device_add:
 	put_device(&rdev->dev);
 
-- 
2.35.1

[PATCH 5.10 086/129] clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit f58ca215cda1975f77b2b762903684a3c101bec9 ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Fixes: 7a6fca879f59 ("clk: sunxi: Add driver for A80 MMC config clocks/resets")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220421134308.2885094-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/sunxi/clk-sun9i-mmc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/sunxi/clk-sun9i-mmc.c b/drivers/clk/sunxi/clk-sun9i-mmc.c
index 542b31d6e96d..636bcf2439ef 100644
--- a/drivers/clk/sunxi/clk-sun9i-mmc.c
+++ b/drivers/clk/sunxi/clk-sun9i-mmc.c
@@ -109,6 +109,8 @@ static int sun9i_a80_mmc_config_clk_probe(struct platform_device *pdev)
 	spin_lock_init(&data->lock);
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r)
+		return -EINVAL;
 	/* one clock/reset pair per word */
 	count = DIV_ROUND_UP((resource_size(r)), SUN9I_MMC_WIDTH);
 	data->membase = devm_ioremap_resource(&pdev->dev, r);
-- 
2.35.1

[PATCH 5.10 087/129] net: bcmgenet: hide status block before TX timestamping

[Greg Kroah-Hartman]

From: Jonathan Lemon <jonathan.lemon@gmail.com>

[ Upstream commit acac0541d1d65e81e599ec399d34d184d2424401 ]

The hardware checksum offloading requires use of a transmit
status block inserted before the outgoing frame data, this was
updated in '9a9ba2a4aaaa ("net: bcmgenet: always enable status blocks")'

However, skb_tx_timestamp() assumes that it is passed a raw frame
and PTP parsing chokes on this status block.

Fix this by calling __skb_pull(), which hides the TSB before calling
skb_tx_timestamp(), so an outgoing PTP packet is parsed correctly.

As the data in the skb has already been set up for DMA, and the
dma_unmap_* calls use a separately stored address, there is no
no effective change in the data transmission.

Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220424165307.591145-1-jonathan.lemon@gmail.com
Fixes: d03825fba459 ("net: bcmgenet: add skb_tx_timestamp call")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index a2062144d7ca..9ffdaa84ba12 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1987,6 +1987,11 @@ static struct sk_buff *bcmgenet_add_tsb(struct net_device *dev,
 	return skb;
 }
 
+static void bcmgenet_hide_tsb(struct sk_buff *skb)
+{
+	__skb_pull(skb, sizeof(struct status_64));
+}
+
 static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct bcmgenet_priv *priv = netdev_priv(dev);
@@ -2093,6 +2098,8 @@ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	GENET_CB(skb)->last_cb = tx_cb_ptr;
+
+	bcmgenet_hide_tsb(skb);
 	skb_tx_timestamp(skb);
 
 	/* Decrement total BD count and advance our write pointer */
-- 
2.35.1

[PATCH 5.10 088/129] net: phy: marvell10g: fix return value on error

[Greg Kroah-Hartman]

From: Baruch Siach <baruch.siach@siklu.com>

[ Upstream commit 0ed9704b660b259b54743cad8a84a11148f60f0a ]

Return back the error value that we get from phy_read_mmd().

Fixes: c84786fa8f91 ("net: phy: marvell10g: read copper results from CSSR1")
Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/f47cb031aeae873bb008ba35001607304a171a20.1650868058.git.baruch@tkos.co.il
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/marvell10g.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index b1bb9b8e1e4e..2b64318efdba 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -650,7 +650,7 @@ static int mv3310_read_status_copper(struct phy_device *phydev)
 
 	cssr1 = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_CSSR1);
 	if (cssr1 < 0)
-		return val;
+		return cssr1;
 
 	/* If the link settings are not resolved, mark the link down */
 	if (!(cssr1 & MV_PCS_CSSR1_RESOLVED)) {
-- 
2.35.1

[PATCH 5.10 089/129] net: dsa: lantiq_gswip: Dont set GSWIP_MII_CFG_RMII_CLK

[Greg Kroah-Hartman]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 71cffebf6358a7f5031f5b208bbdc1cb4db6e539 ]

Commit 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining
GSWIP_MII_CFG bits") added all known bits in the GSWIP_MII_CFGp
register. It helped bring this register into a well-defined state so the
driver has to rely less on the bootloader to do things right.
Unfortunately it also sets the GSWIP_MII_CFG_RMII_CLK bit without any
possibility to configure it. Upon further testing it turns out that all
boards which are supported by the GSWIP driver in OpenWrt which use an
RMII PHY have a dedicated oscillator on the board which provides the
50MHz RMII reference clock.

Don't set the GSWIP_MII_CFG_RMII_CLK bit (but keep the code which always
clears it) to fix support for the Fritz!Box 7362 SL in OpenWrt. This is
a board with two Atheros AR8030 RMII PHYs. With the "RMII clock" bit set
the MAC also generates the RMII reference clock whose signal then
conflicts with the signal from the oscillator on the board. This results
in a constant cycle of the PHY detecting link up/down (and as a result
of that: the two ports using the AR8030 PHYs are not working).

At the time of writing this patch there's no known board where the MAC
(GSWIP) has to generate the RMII reference clock. If needed this can be
implemented in future by providing a device-tree flag so the
GSWIP_MII_CFG_RMII_CLK bit can be toggled per port.

Fixes: 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits")
Tested-by: Jan Hoffmann <jan@3e8.eu>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://lore.kernel.org/r/20220425152027.2220750-1-martin.blumenstingl@googlemail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/lantiq_gswip.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 80ef7ea77954..4abae06499a9 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -1629,9 +1629,6 @@ static void gswip_phylink_mac_config(struct dsa_switch *ds, int port,
 		break;
 	case PHY_INTERFACE_MODE_RMII:
 		miicfg |= GSWIP_MII_CFG_MODE_RMIIM;
-
-		/* Configure the RMII clock as output: */
-		miicfg |= GSWIP_MII_CFG_RMII_CLK;
 		break;
 	case PHY_INTERFACE_MODE_RGMII:
 	case PHY_INTERFACE_MODE_RGMII_ID:
-- 
2.35.1

[PATCH 5.10 090/129] drm/amdkfd: Fix GWS queue count

[Greg Kroah-Hartman]

From: David Yat Sin <david.yatsin@amd.com>

[ Upstream commit 7c6b6e18c890f30965b0589b0a57645e1dbccfde ]

dqm->gws_queue_count and pdd->qpd.mapped_gws_queue need to be updated
each time the queue gets evicted.

Fixes: b8020b0304c8 ("drm/amdkfd: Enable over-subscription with >1 GWS queue")
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/amdkfd/kfd_device_queue_manager.c | 83 +++++++++----------
 1 file changed, 37 insertions(+), 46 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
index 2645ebc63a14..195b7e02dc4b 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
@@ -138,19 +138,33 @@ void program_sh_mem_settings(struct device_queue_manager *dqm,
 }
 
 static void increment_queue_count(struct device_queue_manager *dqm,
-			enum kfd_queue_type type)
+				  struct qcm_process_device *qpd,
+				  struct queue *q)
 {
 	dqm->active_queue_count++;
-	if (type == KFD_QUEUE_TYPE_COMPUTE || type == KFD_QUEUE_TYPE_DIQ)
+	if (q->properties.type == KFD_QUEUE_TYPE_COMPUTE ||
+	    q->properties.type == KFD_QUEUE_TYPE_DIQ)
 		dqm->active_cp_queue_count++;
+
+	if (q->properties.is_gws) {
+		dqm->gws_queue_count++;
+		qpd->mapped_gws_queue = true;
+	}
 }
 
 static void decrement_queue_count(struct device_queue_manager *dqm,
-			enum kfd_queue_type type)
+				  struct qcm_process_device *qpd,
+				  struct queue *q)
 {
 	dqm->active_queue_count--;
-	if (type == KFD_QUEUE_TYPE_COMPUTE || type == KFD_QUEUE_TYPE_DIQ)
+	if (q->properties.type == KFD_QUEUE_TYPE_COMPUTE ||
+	    q->properties.type == KFD_QUEUE_TYPE_DIQ)
 		dqm->active_cp_queue_count--;
+
+	if (q->properties.is_gws) {
+		dqm->gws_queue_count--;
+		qpd->mapped_gws_queue = false;
+	}
 }
 
 static int allocate_doorbell(struct qcm_process_device *qpd, struct queue *q)
@@ -377,7 +391,7 @@ static int create_queue_nocpsch(struct device_queue_manager *dqm,
 	list_add(&q->list, &qpd->queues_list);
 	qpd->queue_count++;
 	if (q->properties.is_active)
-		increment_queue_count(dqm, q->properties.type);
+		increment_queue_count(dqm, qpd, q);
 
 	/*
 	 * Unconditionally increment this counter, regardless of the queue's
@@ -502,13 +516,8 @@ static int destroy_queue_nocpsch_locked(struct device_queue_manager *dqm,
 		deallocate_vmid(dqm, qpd, q);
 	}
 	qpd->queue_count--;
-	if (q->properties.is_active) {
-		decrement_queue_count(dqm, q->properties.type);
-		if (q->properties.is_gws) {
-			dqm->gws_queue_count--;
-			qpd->mapped_gws_queue = false;
-		}
-	}
+	if (q->properties.is_active)
+		decrement_queue_count(dqm, qpd, q);
 
 	return retval;
 }
@@ -598,12 +607,11 @@ static int update_queue(struct device_queue_manager *dqm, struct queue *q)
 	 * dqm->active_queue_count to determine whether a new runlist must be
 	 * uploaded.
 	 */
-	if (q->properties.is_active && !prev_active)
-		increment_queue_count(dqm, q->properties.type);
-	else if (!q->properties.is_active && prev_active)
-		decrement_queue_count(dqm, q->properties.type);
-
-	if (q->gws && !q->properties.is_gws) {
+	if (q->properties.is_active && !prev_active) {
+		increment_queue_count(dqm, &pdd->qpd, q);
+	} else if (!q->properties.is_active && prev_active) {
+		decrement_queue_count(dqm, &pdd->qpd, q);
+	} else if (q->gws && !q->properties.is_gws) {
 		if (q->properties.is_active) {
 			dqm->gws_queue_count++;
 			pdd->qpd.mapped_gws_queue = true;
@@ -665,11 +673,7 @@ static int evict_process_queues_nocpsch(struct device_queue_manager *dqm,
 		mqd_mgr = dqm->mqd_mgrs[get_mqd_type_from_queue_type(
 				q->properties.type)];
 		q->properties.is_active = false;
-		decrement_queue_count(dqm, q->properties.type);
-		if (q->properties.is_gws) {
-			dqm->gws_queue_count--;
-			qpd->mapped_gws_queue = false;
-		}
+		decrement_queue_count(dqm, qpd, q);
 
 		if (WARN_ONCE(!dqm->sched_running, "Evict when stopped\n"))
 			continue;
@@ -713,7 +717,7 @@ static int evict_process_queues_cpsch(struct device_queue_manager *dqm,
 			continue;
 
 		q->properties.is_active = false;
-		decrement_queue_count(dqm, q->properties.type);
+		decrement_queue_count(dqm, qpd, q);
 	}
 	pdd->last_evict_timestamp = get_jiffies_64();
 	retval = execute_queues_cpsch(dqm,
@@ -784,11 +788,7 @@ static int restore_process_queues_nocpsch(struct device_queue_manager *dqm,
 		mqd_mgr = dqm->mqd_mgrs[get_mqd_type_from_queue_type(
 				q->properties.type)];
 		q->properties.is_active = true;
-		increment_queue_count(dqm, q->properties.type);
-		if (q->properties.is_gws) {
-			dqm->gws_queue_count++;
-			qpd->mapped_gws_queue = true;
-		}
+		increment_queue_count(dqm, qpd, q);
 
 		if (WARN_ONCE(!dqm->sched_running, "Restore when stopped\n"))
 			continue;
@@ -846,7 +846,7 @@ static int restore_process_queues_cpsch(struct device_queue_manager *dqm,
 			continue;
 
 		q->properties.is_active = true;
-		increment_queue_count(dqm, q->properties.type);
+		increment_queue_count(dqm, &pdd->qpd, q);
 	}
 	retval = execute_queues_cpsch(dqm,
 				KFD_UNMAP_QUEUES_FILTER_DYNAMIC_QUEUES, 0);
@@ -1247,7 +1247,7 @@ static int create_kernel_queue_cpsch(struct device_queue_manager *dqm,
 			dqm->total_queue_count);
 
 	list_add(&kq->list, &qpd->priv_queue_list);
-	increment_queue_count(dqm, kq->queue->properties.type);
+	increment_queue_count(dqm, qpd, kq->queue);
 	qpd->is_debug = true;
 	execute_queues_cpsch(dqm, KFD_UNMAP_QUEUES_FILTER_DYNAMIC_QUEUES, 0);
 	dqm_unlock(dqm);
@@ -1261,7 +1261,7 @@ static void destroy_kernel_queue_cpsch(struct device_queue_manager *dqm,
 {
 	dqm_lock(dqm);
 	list_del(&kq->list);
-	decrement_queue_count(dqm, kq->queue->properties.type);
+	decrement_queue_count(dqm, qpd, kq->queue);
 	qpd->is_debug = false;
 	execute_queues_cpsch(dqm, KFD_UNMAP_QUEUES_FILTER_ALL_QUEUES, 0);
 	/*
@@ -1328,7 +1328,7 @@ static int create_queue_cpsch(struct device_queue_manager *dqm, struct queue *q,
 	qpd->queue_count++;
 
 	if (q->properties.is_active) {
-		increment_queue_count(dqm, q->properties.type);
+		increment_queue_count(dqm, qpd, q);
 
 		execute_queues_cpsch(dqm,
 				KFD_UNMAP_QUEUES_FILTER_DYNAMIC_QUEUES, 0);
@@ -1513,15 +1513,11 @@ static int destroy_queue_cpsch(struct device_queue_manager *dqm,
 	list_del(&q->list);
 	qpd->queue_count--;
 	if (q->properties.is_active) {
-		decrement_queue_count(dqm, q->properties.type);
+		decrement_queue_count(dqm, qpd, q);
 		retval = execute_queues_cpsch(dqm,
 				KFD_UNMAP_QUEUES_FILTER_DYNAMIC_QUEUES, 0);
 		if (retval == -ETIME)
 			qpd->reset_wavefronts = true;
-		if (q->properties.is_gws) {
-			dqm->gws_queue_count--;
-			qpd->mapped_gws_queue = false;
-		}
 	}
 
 	/*
@@ -1732,7 +1728,7 @@ static int process_termination_cpsch(struct device_queue_manager *dqm,
 	/* Clean all kernel queues */
 	list_for_each_entry_safe(kq, kq_next, &qpd->priv_queue_list, list) {
 		list_del(&kq->list);
-		decrement_queue_count(dqm, kq->queue->properties.type);
+		decrement_queue_count(dqm, qpd, kq->queue);
 		qpd->is_debug = false;
 		dqm->total_queue_count--;
 		filter = KFD_UNMAP_QUEUES_FILTER_ALL_QUEUES;
@@ -1745,13 +1741,8 @@ static int process_termination_cpsch(struct device_queue_manager *dqm,
 		else if (q->properties.type == KFD_QUEUE_TYPE_SDMA_XGMI)
 			deallocate_sdma_queue(dqm, q);
 
-		if (q->properties.is_active) {
-			decrement_queue_count(dqm, q->properties.type);
-			if (q->properties.is_gws) {
-				dqm->gws_queue_count--;
-				qpd->mapped_gws_queue = false;
-			}
-		}
+		if (q->properties.is_active)
+			decrement_queue_count(dqm, qpd, q);
 
 		dqm->total_queue_count--;
 	}
-- 
2.35.1

[PATCH 5.10 091/129] drm/amd/display: Fix memory leak in dcn21_clock_source_create

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 65e54987508b6f0771f56bdfa3ee1926d52785ae ]

When dcn20_clk_src_construct() fails, we need to release clk_src.

Fixes: 6f4e6361c3ff ("drm/amd/display: Add Renoir resource (v2)")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
index 7ed4d7c8734f..01c4e8753294 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
@@ -1267,6 +1267,7 @@ static struct clock_source *dcn21_clock_source_create(
 		return &clk_src->base;
 	}
 
+	kfree(clk_src);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
-- 
2.35.1

[PATCH 5.10 092/129] tls: Skip tls_append_frag on zero copy size

[Greg Kroah-Hartman]

From: Maxim Mikityanskiy <maximmi@nvidia.com>

[ Upstream commit a0df71948e9548de819a6f1da68f5f1742258a52 ]

Calling tls_append_frag when max_open_record_len == record->len might
add an empty fragment to the TLS record if the call happens to be on the
page boundary. Normally tls_append_frag coalesces the zero-sized
fragment to the previous one, but not if it's on page boundary.

If a resync happens then, the mlx5 driver posts dump WQEs in
tx_post_resync_dump, and the empty fragment may become a data segment
with byte_count == 0, which will confuse the NIC and lead to a CQE
error.

This commit fixes the described issue by skipping tls_append_frag on
zero size to avoid adding empty fragments. The fix is not in the driver,
because an empty fragment is hardly the desired behavior.

Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220426154949.159055-1-maximmi@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tls/tls_device.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/net/tls/tls_device.c b/net/tls/tls_device.c
index f718c7346088..1f56225a10e3 100644
--- a/net/tls/tls_device.c
+++ b/net/tls/tls_device.c
@@ -483,11 +483,13 @@ static int tls_push_data(struct sock *sk,
 		copy = min_t(size_t, size, (pfrag->size - pfrag->offset));
 		copy = min_t(size_t, copy, (max_open_record_len - record->len));
 
-		rc = tls_device_copy_data(page_address(pfrag->page) +
-					  pfrag->offset, copy, msg_iter);
-		if (rc)
-			goto handle_error;
-		tls_append_frag(record, pfrag, copy);
+		if (copy) {
+			rc = tls_device_copy_data(page_address(pfrag->page) +
+						  pfrag->offset, copy, msg_iter);
+			if (rc)
+				goto handle_error;
+			tls_append_frag(record, pfrag, copy);
+		}
 
 		size -= copy;
 		if (!size) {
-- 
2.35.1

[PATCH 5.10 093/129] bnx2x: fix napi API usage sequence

[Greg Kroah-Hartman]

From: Manish Chopra <manishc@marvell.com>

[ Upstream commit af68656d66eda219b7f55ce8313a1da0312c79e1 ]

While handling PCI errors (AER flow) driver tries to
disable NAPI [napi_disable()] after NAPI is deleted
[__netif_napi_del()] which causes unexpected system
hang/crash.

System message log shows the following:
=======================================
[ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures.
[ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)'
[ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking
bnx2x->error_detected(IO frozen)
[ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports:
'need reset'
[ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking
bnx2x->error_detected(IO frozen)
[ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports:
'need reset'
[ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset'
[ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow:
[ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows:
[ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow:
[ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows:
[ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset'
[ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking
bnx2x->slot_reset()
[ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing...
[ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset
--> driver unload

Uninterruptible tasks
=====================
crash> ps | grep UN
     213      2  11  c000000004c89e00  UN   0.0       0      0  [eehd]
     215      2   0  c000000004c80000  UN   0.0       0      0
[kworker/0:2]
    2196      1  28  c000000004504f00  UN   0.1   15936  11136  wickedd
    4287      1   9  c00000020d076800  UN   0.0    4032   3008  agetty
    4289      1  20  c00000020d056680  UN   0.0    7232   3840  agetty
   32423      2  26  c00000020038c580  UN   0.0       0      0
[kworker/26:3]
   32871   4241  27  c0000002609ddd00  UN   0.1   18624  11648  sshd
   32920  10130  16  c00000027284a100  UN   0.1   48512  12608  sendmail
   33092  32987   0  c000000205218b00  UN   0.1   48512  12608  sendmail
   33154   4567  16  c000000260e51780  UN   0.1   48832  12864  pickup
   33209   4241  36  c000000270cb6500  UN   0.1   18624  11712  sshd
   33473  33283   0  c000000205211480  UN   0.1   48512  12672  sendmail
   33531   4241  37  c00000023c902780  UN   0.1   18624  11648  sshd

EEH handler hung while bnx2x sleeping and holding RTNL lock
===========================================================
crash> bt 213
PID: 213    TASK: c000000004c89e00  CPU: 11  COMMAND: "eehd"
  #0 [c000000004d477e0] __schedule at c000000000c70808
  #1 [c000000004d478b0] schedule at c000000000c70ee0
  #2 [c000000004d478e0] schedule_timeout at c000000000c76dec
  #3 [c000000004d479c0] msleep at c0000000002120cc
  #4 [c000000004d479f0] napi_disable at c000000000a06448
                                        ^^^^^^^^^^^^^^^^
  #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x]
  #6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x]
  #7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc
  #8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8
  #9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64

And the sleeping source code
============================
crash> dis -ls c000000000a06448
FILE: ../net/core/dev.c
LINE: 6702

   6697  {
   6698          might_sleep();
   6699          set_bit(NAPI_STATE_DISABLE, &n->state);
   6700
   6701          while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
* 6702                  msleep(1);
   6703          while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state))
   6704                  msleep(1);
   6705
   6706          hrtimer_cancel(&n->timer);
   6707
   6708          clear_bit(NAPI_STATE_DISABLE, &n->state);
   6709  }

EEH calls into bnx2x twice based on the system log above, first through
bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes
the following call chains:

bnx2x_io_error_detected()
  +-> bnx2x_eeh_nic_unload()
       +-> bnx2x_del_all_napi()
            +-> __netif_napi_del()

bnx2x_io_slot_reset()
  +-> bnx2x_netif_stop()
       +-> bnx2x_napi_disable()
            +->napi_disable()

Fix this by correcting the sequence of NAPI APIs usage,
that is delete the NAPI after disabling it.

Fixes: 7fa6f34081f1 ("bnx2x: AER revised")
Reported-by: David Christensen <drc@linux.vnet.ibm.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 6333471916be..afb6d3ee1f56 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -14213,10 +14213,6 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
 
 	/* Stop Tx */
 	bnx2x_tx_disable(bp);
-	/* Delete all NAPI objects */
-	bnx2x_del_all_napi(bp);
-	if (CNIC_LOADED(bp))
-		bnx2x_del_all_napi_cnic(bp);
 	netdev_reset_tc(bp->dev);
 
 	del_timer_sync(&bp->timer);
@@ -14321,6 +14317,11 @@ static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev)
 		bnx2x_drain_tx_queues(bp);
 		bnx2x_send_unload_req(bp, UNLOAD_RECOVERY);
 		bnx2x_netif_stop(bp, 1);
+		bnx2x_del_all_napi(bp);
+
+		if (CNIC_LOADED(bp))
+			bnx2x_del_all_napi_cnic(bp);
+
 		bnx2x_free_irq(bp);
 
 		/* Report UNLOAD_DONE to MCP */
-- 
2.35.1

[PATCH 5.10 094/129] net: fec: add missing of_node_put() in fec_enet_init_stop_mode()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit d2b52ec056d5bddb055c8f21d7489a23548d0838 ]

Put device node in error path in fec_enet_init_stop_mode().

Fixes: 8a448bf832af ("net: ethernet: fec: move GPR register offset and bit into DT")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220426125231.375688-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/fec_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 166bc3f3b34c..d8bdaf2e5365 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3529,7 +3529,7 @@ static int fec_enet_init_stop_mode(struct fec_enet_private *fep,
 					 ARRAY_SIZE(out_val));
 	if (ret) {
 		dev_dbg(&fep->pdev->dev, "no stop mode property\n");
-		return ret;
+		goto out;
 	}
 
 	fep->stop_gpr.gpr = syscon_node_to_regmap(gpr_np);
-- 
2.35.1

[PATCH 5.10 095/129] ixgbe: ensure IPsec VF<->PF compatibility

[Greg Kroah-Hartman]

From: Leon Romanovsky <leonro@nvidia.com>

[ Upstream commit f049efc7f7cd2f3c419f55040928eaefb13b3636 ]

The VF driver can forward any IPsec flags and such makes the function
is not extendable and prone to backward/forward incompatibility.

If new software runs on VF, it won't know that PF configured something
completely different as it "knows" only XFRM_OFFLOAD_INBOUND flag.

Fixes: eda0333ac293 ("ixgbe: add VF IPsec management")
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220427173152.443102-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
index 54d47265a7ac..319620856cba 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
@@ -903,7 +903,8 @@ int ixgbe_ipsec_vf_add_sa(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
 	/* Tx IPsec offload doesn't seem to work on this
 	 * device, so block these requests for now.
 	 */
-	if (!(sam->flags & XFRM_OFFLOAD_INBOUND)) {
+	sam->flags = sam->flags & ~XFRM_OFFLOAD_IPV6;
+	if (sam->flags != XFRM_OFFLOAD_INBOUND) {
 		err = -EOPNOTSUPP;
 		goto err_out;
 	}
-- 
2.35.1

[PATCH 5.10 096/129] ibmvnic: fix miscellaneous checks

[Greg Kroah-Hartman]

From: Lijun Pan <lijunp213@gmail.com>

[ Upstream commit 91dc5d2553fbf20e2e8384ac997f278a50c70561 ]

Fix the following checkpatch checks:
CHECK: Macro argument 'off' may be better as '(off)' to
avoid precedence issues
CHECK: Alignment should match open parenthesis
CHECK: multiple assignments should be avoided
CHECK: Blank lines aren't necessary before a close brace '}'
CHECK: Please use a blank line after function/struct/union/enum
declarations
CHECK: Unnecessary parentheses around 'rc != H_FUNCTION'

Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ibm/ibmvnic.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 95bee3d91593..2cd849215913 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -117,7 +117,7 @@ struct ibmvnic_stat {
 
 #define IBMVNIC_STAT_OFF(stat) (offsetof(struct ibmvnic_adapter, stats) + \
 			     offsetof(struct ibmvnic_statistics, stat))
-#define IBMVNIC_GET_STAT(a, off) (*((u64 *)(((unsigned long)(a)) + off)))
+#define IBMVNIC_GET_STAT(a, off) (*((u64 *)(((unsigned long)(a)) + (off))))
 
 static const struct ibmvnic_stat ibmvnic_stats[] = {
 	{"rx_packets", IBMVNIC_STAT_OFF(rx_packets)},
@@ -2063,14 +2063,14 @@ static int do_reset(struct ibmvnic_adapter *adapter,
 			rc = reset_tx_pools(adapter);
 			if (rc) {
 				netdev_dbg(adapter->netdev, "reset tx pools failed (%d)\n",
-						rc);
+					   rc);
 				goto out;
 			}
 
 			rc = reset_rx_pools(adapter);
 			if (rc) {
 				netdev_dbg(adapter->netdev, "reset rx pools failed (%d)\n",
-						rc);
+					   rc);
 				goto out;
 			}
 		}
@@ -2331,7 +2331,8 @@ static int ibmvnic_reset(struct ibmvnic_adapter *adapter,
 
 	if (adapter->state == VNIC_PROBING) {
 		netdev_warn(netdev, "Adapter reset during probe\n");
-		ret = adapter->init_done_rc = EAGAIN;
+		adapter->init_done_rc = EAGAIN;
+		ret = EAGAIN;
 		goto err;
 	}
 
@@ -2744,7 +2745,6 @@ static int ibmvnic_set_channels(struct net_device *netdev,
 			    channels->rx_count, channels->tx_count,
 			    adapter->req_rx_queues, adapter->req_tx_queues);
 	return ret;
-
 }
 
 static void ibmvnic_get_strings(struct net_device *dev, u32 stringset, u8 *data)
@@ -2833,8 +2833,8 @@ static void ibmvnic_get_ethtool_stats(struct net_device *dev,
 		return;
 
 	for (i = 0; i < ARRAY_SIZE(ibmvnic_stats); i++)
-		data[i] = be64_to_cpu(IBMVNIC_GET_STAT(adapter,
-						ibmvnic_stats[i].offset));
+		data[i] = be64_to_cpu(IBMVNIC_GET_STAT
+				      (adapter, ibmvnic_stats[i].offset));
 
 	for (j = 0; j < adapter->req_tx_queues; j++) {
 		data[i] = adapter->tx_stats_buffers[j].packets;
@@ -2874,6 +2874,7 @@ static int ibmvnic_set_priv_flags(struct net_device *netdev, u32 flags)
 
 	return 0;
 }
+
 static const struct ethtool_ops ibmvnic_ethtool_ops = {
 	.get_drvinfo		= ibmvnic_get_drvinfo,
 	.get_msglevel		= ibmvnic_get_msglevel,
@@ -3119,7 +3120,7 @@ static int enable_scrq_irq(struct ibmvnic_adapter *adapter,
 		/* H_EOI would fail with rc = H_FUNCTION when running
 		 * in XIVE mode which is expected, but not an error.
 		 */
-		if (rc && (rc != H_FUNCTION))
+		if (rc && rc != H_FUNCTION)
 			dev_err(dev, "H_EOI FAILED irq 0x%llx. rc=%ld\n",
 				val, rc);
 	}
-- 
2.35.1

[PATCH 5.10 097/129] Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"

[Greg Kroah-Hartman]

From: Dany Madden <drt@linux.ibm.com>

[ Upstream commit aeaf59b78712c7a1827c76f086acff4f586e072f ]

This reverts commit 723ad916134784b317b72f3f6cf0f7ba774e5dae

When client requests channel or ring size larger than what the server
can support the server will cap the request to the supported max. So,
the client would not be able to successfully request resources that
exceed the server limit.

Fixes: 723ad9161347 ("ibmvnic: Add ethtool private flag for driver-defined queue limits")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Link: https://lore.kernel.org/r/20220427235146.23189-1-drt@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ibm/ibmvnic.c | 129 ++++++++---------------------
 drivers/net/ethernet/ibm/ibmvnic.h |   6 --
 2 files changed, 35 insertions(+), 100 deletions(-)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 2cd849215913..61fb2a092451 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -2666,13 +2666,8 @@ static void ibmvnic_get_ringparam(struct net_device *netdev,
 {
 	struct ibmvnic_adapter *adapter = netdev_priv(netdev);
 
-	if (adapter->priv_flags & IBMVNIC_USE_SERVER_MAXES) {
-		ring->rx_max_pending = adapter->max_rx_add_entries_per_subcrq;
-		ring->tx_max_pending = adapter->max_tx_entries_per_subcrq;
-	} else {
-		ring->rx_max_pending = IBMVNIC_MAX_QUEUE_SZ;
-		ring->tx_max_pending = IBMVNIC_MAX_QUEUE_SZ;
-	}
+	ring->rx_max_pending = adapter->max_rx_add_entries_per_subcrq;
+	ring->tx_max_pending = adapter->max_tx_entries_per_subcrq;
 	ring->rx_mini_max_pending = 0;
 	ring->rx_jumbo_max_pending = 0;
 	ring->rx_pending = adapter->req_rx_add_entries_per_subcrq;
@@ -2685,23 +2680,21 @@ static int ibmvnic_set_ringparam(struct net_device *netdev,
 				 struct ethtool_ringparam *ring)
 {
 	struct ibmvnic_adapter *adapter = netdev_priv(netdev);
-	int ret;
 
-	ret = 0;
+	if (ring->rx_pending > adapter->max_rx_add_entries_per_subcrq  ||
+	    ring->tx_pending > adapter->max_tx_entries_per_subcrq) {
+		netdev_err(netdev, "Invalid request.\n");
+		netdev_err(netdev, "Max tx buffers = %llu\n",
+			   adapter->max_rx_add_entries_per_subcrq);
+		netdev_err(netdev, "Max rx buffers = %llu\n",
+			   adapter->max_tx_entries_per_subcrq);
+		return -EINVAL;
+	}
+
 	adapter->desired.rx_entries = ring->rx_pending;
 	adapter->desired.tx_entries = ring->tx_pending;
 
-	ret = wait_for_reset(adapter);
-
-	if (!ret &&
-	    (adapter->req_rx_add_entries_per_subcrq != ring->rx_pending ||
-	     adapter->req_tx_entries_per_subcrq != ring->tx_pending))
-		netdev_info(netdev,
-			    "Could not match full ringsize request. Requested: RX %d, TX %d; Allowed: RX %llu, TX %llu\n",
-			    ring->rx_pending, ring->tx_pending,
-			    adapter->req_rx_add_entries_per_subcrq,
-			    adapter->req_tx_entries_per_subcrq);
-	return ret;
+	return wait_for_reset(adapter);
 }
 
 static void ibmvnic_get_channels(struct net_device *netdev,
@@ -2709,14 +2702,8 @@ static void ibmvnic_get_channels(struct net_device *netdev,
 {
 	struct ibmvnic_adapter *adapter = netdev_priv(netdev);
 
-	if (adapter->priv_flags & IBMVNIC_USE_SERVER_MAXES) {
-		channels->max_rx = adapter->max_rx_queues;
-		channels->max_tx = adapter->max_tx_queues;
-	} else {
-		channels->max_rx = IBMVNIC_MAX_QUEUES;
-		channels->max_tx = IBMVNIC_MAX_QUEUES;
-	}
-
+	channels->max_rx = adapter->max_rx_queues;
+	channels->max_tx = adapter->max_tx_queues;
 	channels->max_other = 0;
 	channels->max_combined = 0;
 	channels->rx_count = adapter->req_rx_queues;
@@ -2729,22 +2716,11 @@ static int ibmvnic_set_channels(struct net_device *netdev,
 				struct ethtool_channels *channels)
 {
 	struct ibmvnic_adapter *adapter = netdev_priv(netdev);
-	int ret;
 
-	ret = 0;
 	adapter->desired.rx_queues = channels->rx_count;
 	adapter->desired.tx_queues = channels->tx_count;
 
-	ret = wait_for_reset(adapter);
-
-	if (!ret &&
-	    (adapter->req_rx_queues != channels->rx_count ||
-	     adapter->req_tx_queues != channels->tx_count))
-		netdev_info(netdev,
-			    "Could not match full channels request. Requested: RX %d, TX %d; Allowed: RX %llu, TX %llu\n",
-			    channels->rx_count, channels->tx_count,
-			    adapter->req_rx_queues, adapter->req_tx_queues);
-	return ret;
+	return wait_for_reset(adapter);
 }
 
 static void ibmvnic_get_strings(struct net_device *dev, u32 stringset, u8 *data)
@@ -2752,43 +2728,32 @@ static void ibmvnic_get_strings(struct net_device *dev, u32 stringset, u8 *data)
 	struct ibmvnic_adapter *adapter = netdev_priv(dev);
 	int i;
 
-	switch (stringset) {
-	case ETH_SS_STATS:
-		for (i = 0; i < ARRAY_SIZE(ibmvnic_stats);
-				i++, data += ETH_GSTRING_LEN)
-			memcpy(data, ibmvnic_stats[i].name, ETH_GSTRING_LEN);
+	if (stringset != ETH_SS_STATS)
+		return;
 
-		for (i = 0; i < adapter->req_tx_queues; i++) {
-			snprintf(data, ETH_GSTRING_LEN, "tx%d_packets", i);
-			data += ETH_GSTRING_LEN;
+	for (i = 0; i < ARRAY_SIZE(ibmvnic_stats); i++, data += ETH_GSTRING_LEN)
+		memcpy(data, ibmvnic_stats[i].name, ETH_GSTRING_LEN);
 
-			snprintf(data, ETH_GSTRING_LEN, "tx%d_bytes", i);
-			data += ETH_GSTRING_LEN;
+	for (i = 0; i < adapter->req_tx_queues; i++) {
+		snprintf(data, ETH_GSTRING_LEN, "tx%d_packets", i);
+		data += ETH_GSTRING_LEN;
 
-			snprintf(data, ETH_GSTRING_LEN,
-				 "tx%d_dropped_packets", i);
-			data += ETH_GSTRING_LEN;
-		}
+		snprintf(data, ETH_GSTRING_LEN, "tx%d_bytes", i);
+		data += ETH_GSTRING_LEN;
 
-		for (i = 0; i < adapter->req_rx_queues; i++) {
-			snprintf(data, ETH_GSTRING_LEN, "rx%d_packets", i);
-			data += ETH_GSTRING_LEN;
+		snprintf(data, ETH_GSTRING_LEN, "tx%d_dropped_packets", i);
+		data += ETH_GSTRING_LEN;
+	}
 
-			snprintf(data, ETH_GSTRING_LEN, "rx%d_bytes", i);
-			data += ETH_GSTRING_LEN;
+	for (i = 0; i < adapter->req_rx_queues; i++) {
+		snprintf(data, ETH_GSTRING_LEN, "rx%d_packets", i);
+		data += ETH_GSTRING_LEN;
 
-			snprintf(data, ETH_GSTRING_LEN, "rx%d_interrupts", i);
-			data += ETH_GSTRING_LEN;
-		}
-		break;
+		snprintf(data, ETH_GSTRING_LEN, "rx%d_bytes", i);
+		data += ETH_GSTRING_LEN;
 
-	case ETH_SS_PRIV_FLAGS:
-		for (i = 0; i < ARRAY_SIZE(ibmvnic_priv_flags); i++)
-			strcpy(data + i * ETH_GSTRING_LEN,
-			       ibmvnic_priv_flags[i]);
-		break;
-	default:
-		return;
+		snprintf(data, ETH_GSTRING_LEN, "rx%d_interrupts", i);
+		data += ETH_GSTRING_LEN;
 	}
 }
 
@@ -2801,8 +2766,6 @@ static int ibmvnic_get_sset_count(struct net_device *dev, int sset)
 		return ARRAY_SIZE(ibmvnic_stats) +
 		       adapter->req_tx_queues * NUM_TX_STATS +
 		       adapter->req_rx_queues * NUM_RX_STATS;
-	case ETH_SS_PRIV_FLAGS:
-		return ARRAY_SIZE(ibmvnic_priv_flags);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -2855,26 +2818,6 @@ static void ibmvnic_get_ethtool_stats(struct net_device *dev,
 	}
 }
 
-static u32 ibmvnic_get_priv_flags(struct net_device *netdev)
-{
-	struct ibmvnic_adapter *adapter = netdev_priv(netdev);
-
-	return adapter->priv_flags;
-}
-
-static int ibmvnic_set_priv_flags(struct net_device *netdev, u32 flags)
-{
-	struct ibmvnic_adapter *adapter = netdev_priv(netdev);
-	bool which_maxes = !!(flags & IBMVNIC_USE_SERVER_MAXES);
-
-	if (which_maxes)
-		adapter->priv_flags |= IBMVNIC_USE_SERVER_MAXES;
-	else
-		adapter->priv_flags &= ~IBMVNIC_USE_SERVER_MAXES;
-
-	return 0;
-}
-
 static const struct ethtool_ops ibmvnic_ethtool_ops = {
 	.get_drvinfo		= ibmvnic_get_drvinfo,
 	.get_msglevel		= ibmvnic_get_msglevel,
@@ -2888,8 +2831,6 @@ static const struct ethtool_ops ibmvnic_ethtool_ops = {
 	.get_sset_count         = ibmvnic_get_sset_count,
 	.get_ethtool_stats	= ibmvnic_get_ethtool_stats,
 	.get_link_ksettings	= ibmvnic_get_link_ksettings,
-	.get_priv_flags		= ibmvnic_get_priv_flags,
-	.set_priv_flags		= ibmvnic_set_priv_flags,
 };
 
 /* Routines for managing CRQs/sCRQs  */
diff --git a/drivers/net/ethernet/ibm/ibmvnic.h b/drivers/net/ethernet/ibm/ibmvnic.h
index b27211063c64..2eb9a4d5533a 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.h
+++ b/drivers/net/ethernet/ibm/ibmvnic.h
@@ -41,11 +41,6 @@
 
 #define IBMVNIC_RESET_DELAY 100
 
-static const char ibmvnic_priv_flags[][ETH_GSTRING_LEN] = {
-#define IBMVNIC_USE_SERVER_MAXES 0x1
-	"use-server-maxes"
-};
-
 struct ibmvnic_login_buffer {
 	__be32 len;
 	__be32 version;
@@ -974,7 +969,6 @@ struct ibmvnic_adapter {
 	struct ibmvnic_control_ip_offload_buffer ip_offload_ctrl;
 	dma_addr_t ip_offload_ctrl_tok;
 	u32 msg_enable;
-	u32 priv_flags;
 
 	/* Vital Product Data (VPD) */
 	struct ibmvnic_vpd *vpd;
-- 
2.35.1

[PATCH 5.10 098/129] tcp: fix F-RTO may not work correctly when receiving DSACK

[Greg Kroah-Hartman]

From: Pengcheng Yang <yangpc@wangsu.com>

[ Upstream commit d9157f6806d1499e173770df1f1b234763de5c79 ]

Currently DSACK is regarded as a dupack, which may cause
F-RTO to incorrectly enter "loss was real" when receiving
DSACK.

Packetdrill to demonstrate:

// Enable F-RTO and TLP
    0 `sysctl -q net.ipv4.tcp_frto=2`
    0 `sysctl -q net.ipv4.tcp_early_retrans=3`
    0 `sysctl -q net.ipv4.tcp_congestion_control=cubic`

// Establish a connection
   +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
   +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
   +0 bind(3, ..., ...) = 0
   +0 listen(3, 1) = 0

// RTT 10ms, RTO 210ms
  +.1 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7>
   +0 > S. 0:0(0) ack 1 <...>
 +.01 < . 1:1(0) ack 1 win 257
   +0 accept(3, ..., ...) = 4

// Send 2 data segments
   +0 write(4, ..., 2000) = 2000
   +0 > P. 1:2001(2000) ack 1

// TLP
+.022 > P. 1001:2001(1000) ack 1

// Continue to send 8 data segments
   +0 write(4, ..., 10000) = 10000
   +0 > P. 2001:10001(8000) ack 1

// RTO
+.188 > . 1:1001(1000) ack 1

// The original data is acked and new data is sent(F-RTO step 2.b)
   +0 < . 1:1(0) ack 2001 win 257
   +0 > P. 10001:12001(2000) ack 1

// D-SACK caused by TLP is regarded as a dupack, this results in
// the incorrect judgment of "loss was real"(F-RTO step 3.a)
+.022 < . 1:1(0) ack 2001 win 257 <sack 1001:2001,nop,nop>

// Never-retransmitted data(3001:4001) are acked and
// expect to switch to open state(F-RTO step 3.b)
   +0 < . 1:1(0) ack 4001 win 257
+0 %{ assert tcpi_ca_state == 0, tcpi_ca_state }%

Fixes: e33099f96d99 ("tcp: implement RFC5682 F-RTO")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1650967419-2150-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_input.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index c25a95c74128..2e267b2e33e5 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -3814,7 +3814,8 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag)
 		tcp_process_tlp_ack(sk, ack, flag);
 
 	if (tcp_ack_is_dubious(sk, flag)) {
-		if (!(flag & (FLAG_SND_UNA_ADVANCED | FLAG_NOT_DUP))) {
+		if (!(flag & (FLAG_SND_UNA_ADVANCED |
+			      FLAG_NOT_DUP | FLAG_DSACKING_ACK))) {
 			num_dupack = 1;
 			/* Consider if pure acks were aggregated in tcp_add_backlog() */
 			if (!(flag & FLAG_DATA))
-- 
2.35.1

[PATCH 5.10 099/129] ASoC: Intel: soc-acpi: correct device endpoints for max98373

[Greg Kroah-Hartman]

From: Chao Song <chao.song@linux.intel.com>

[ Upstream commit 97326be14df7bacc6ba5c62c0556298c27ea0432 ]

The left speaker of max98373 uses spk_r_endpoint, and right
speaker uses spk_l_endpoint, this is obviously wrong.

This patch corrects the endpoints for max98373 codec.

Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220406192341.271465-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/common/soc-acpi-intel-tgl-match.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/intel/common/soc-acpi-intel-tgl-match.c b/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
index 9f243e60b95c..15d862cdcd2f 100644
--- a/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
+++ b/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
@@ -126,13 +126,13 @@ static const struct snd_soc_acpi_adr_device mx8373_1_adr[] = {
 	{
 		.adr = 0x000123019F837300,
 		.num_endpoints = 1,
-		.endpoints = &spk_l_endpoint,
+		.endpoints = &spk_r_endpoint,
 		.name_prefix = "Right"
 	},
 	{
 		.adr = 0x000127019F837300,
 		.num_endpoints = 1,
-		.endpoints = &spk_r_endpoint,
+		.endpoints = &spk_l_endpoint,
 		.name_prefix = "Left"
 	}
 };
-- 
2.35.1

[PATCH 5.10 100/129] ASoC: wm8731: Disable the regulator when probing fails

[Greg Kroah-Hartman]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 92ccbf17eeacf510cf1eed9c252d9332ca24f02d ]

When the driver fails during probing, the driver should disable the
regulator, not just handle it in wm8731_hw_init().

The following log reveals it:

[   17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[   17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0
[   17.824467] Call Trace:
[   17.824774]  <TASK>
[   17.825040]  regulator_bulk_free+0x82/0xe0
[   17.825514]  devres_release_group+0x319/0x3d0
[   17.825882]  i2c_device_probe+0x766/0x940
[   17.829198]  i2c_register_driver+0xb5/0x130

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220405121038.4094051-1-zheyuma97@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8731.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 304bf725a613..24a009d73f1e 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -602,7 +602,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
 	ret = wm8731_reset(wm8731->regmap);
 	if (ret < 0) {
 		dev_err(dev, "Failed to issue reset: %d\n", ret);
-		goto err_regulator_enable;
+		goto err;
 	}
 
 	/* Clear POWEROFF, keep everything else disabled */
@@ -619,10 +619,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
 
 	regcache_mark_dirty(wm8731->regmap);
 
-err_regulator_enable:
-	/* Regulators will be enabled by bias management */
-	regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
-
+err:
 	return ret;
 }
 
@@ -766,21 +763,27 @@ static int wm8731_i2c_probe(struct i2c_client *i2c,
 		ret = PTR_ERR(wm8731->regmap);
 		dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
 			ret);
-		return ret;
+		goto err_regulator_enable;
 	}
 
 	ret = wm8731_hw_init(&i2c->dev, wm8731);
 	if (ret != 0)
-		return ret;
+		goto err_regulator_enable;
 
 	ret = devm_snd_soc_register_component(&i2c->dev,
 			&soc_component_dev_wm8731, &wm8731_dai, 1);
 	if (ret != 0) {
 		dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
-		return ret;
+		goto err_regulator_enable;
 	}
 
 	return 0;
+
+err_regulator_enable:
+	/* Regulators will be enabled by bias management */
+	regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
+
+	return ret;
 }
 
 static int wm8731_i2c_remove(struct i2c_client *client)
-- 
2.35.1

[PATCH 5.10 101/129] ext4: fix bug_on in start_this_handle during umount filesystem

[Greg Kroah-Hartman]

From: Ye Bin <yebin10@huawei.com>

[ Upstream commit b98535d091795a79336f520b0708457aacf55c67 ]

We got issue as follows:
------------[ cut here ]------------
kernel BUG at fs/jbd2/transaction.c:389!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 9 PID: 131 Comm: kworker/9:1 Not tainted 5.17.0-862.14.0.6.x86_64-00001-g23f87daf7d74-dirty #197
Workqueue: events flush_stashed_error_work
RIP: 0010:start_this_handle+0x41c/0x1160
RSP: 0018:ffff888106b47c20 EFLAGS: 00010202
RAX: ffffed10251b8400 RBX: ffff888128dc204c RCX: ffffffffb52972ac
RDX: 0000000000000200 RSI: 0000000000000004 RDI: ffff888128dc2050
RBP: 0000000000000039 R08: 0000000000000001 R09: ffffed10251b840a
R10: ffff888128dc204f R11: ffffed10251b8409 R12: ffff888116d78000
R13: 0000000000000000 R14: dffffc0000000000 R15: ffff888128dc2000
FS:  0000000000000000(0000) GS:ffff88839d680000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000001620068 CR3: 0000000376c0e000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 jbd2__journal_start+0x38a/0x790
 jbd2_journal_start+0x19/0x20
 flush_stashed_error_work+0x110/0x2b3
 process_one_work+0x688/0x1080
 worker_thread+0x8b/0xc50
 kthread+0x26f/0x310
 ret_from_fork+0x22/0x30
 </TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---

Above issue may happen as follows:
      umount            read procfs            error_work
ext4_put_super
  flush_work(&sbi->s_error_work);

                      ext4_mb_seq_groups_show
	                ext4_mb_load_buddy_gfp
			  ext4_mb_init_group
			    ext4_mb_init_cache
	                      ext4_read_block_bitmap_nowait
			        ext4_validate_block_bitmap
				  ext4_error
			            ext4_handle_error
			              schedule_work(&EXT4_SB(sb)->s_error_work);

  ext4_unregister_sysfs(sb);
  jbd2_journal_destroy(sbi->s_journal);
    journal_kill_thread
      journal->j_flags |= JBD2_UNMOUNT;

                                          flush_stashed_error_work
				            jbd2_journal_start
					      start_this_handle
					        BUG_ON(journal->j_flags & JBD2_UNMOUNT);

To solve this issue, we call 'ext4_unregister_sysfs() before flushing
s_error_work in ext4_put_super().

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20220322012419.725457-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/super.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 5e6c03458317..3e26edeca8c7 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1176,18 +1176,23 @@ static void ext4_put_super(struct super_block *sb)
 	int aborted = 0;
 	int i, err;
 
-	ext4_unregister_li_request(sb);
-	ext4_quota_off_umount(sb);
-
-	destroy_workqueue(sbi->rsv_conversion_wq);
-
 	/*
 	 * Unregister sysfs before destroying jbd2 journal.
 	 * Since we could still access attr_journal_task attribute via sysfs
 	 * path which could have sbi->s_journal->j_task as NULL
+	 * Unregister sysfs before flush sbi->s_error_work.
+	 * Since user may read /proc/fs/ext4/xx/mb_groups during umount, If
+	 * read metadata verify failed then will queue error work.
+	 * flush_stashed_error_work will call start_this_handle may trigger
+	 * BUG_ON.
 	 */
 	ext4_unregister_sysfs(sb);
 
+	ext4_unregister_li_request(sb);
+	ext4_quota_off_umount(sb);
+
+	destroy_workqueue(sbi->rsv_conversion_wq);
+
 	if (sbi->s_journal) {
 		aborted = is_journal_aborted(sbi->s_journal);
 		err = jbd2_journal_destroy(sbi->s_journal);
-- 
2.35.1

[PATCH 5.10 102/129] x86: __memcpy_flushcache: fix wrong alignment if size > 2^32

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

[ Upstream commit a6823e4e360fe975bd3da4ab156df7c74c8b07f3 ]

The first "if" condition in __memcpy_flushcache is supposed to align the
"dest" variable to 8 bytes and copy data up to this alignment.  However,
this condition may misbehave if "size" is greater than 4GiB.

The statement min_t(unsigned, size, ALIGN(dest, 8) - dest); casts both
arguments to unsigned int and selects the smaller one.  However, the
cast truncates high bits in "size" and it results in misbehavior.

For example:

	suppose that size == 0x100000001, dest == 0x200000002
	min_t(unsigned, size, ALIGN(dest, 8) - dest) == min_t(0x1, 0xe) == 0x1;
	...
	dest += 0x1;

so we copy just one byte "and" dest remains unaligned.

This patch fixes the bug by replacing unsigned with size_t.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/lib/usercopy_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c
index 508c81e97ab1..f1c0befb62df 100644
--- a/arch/x86/lib/usercopy_64.c
+++ b/arch/x86/lib/usercopy_64.c
@@ -121,7 +121,7 @@ void __memcpy_flushcache(void *_dst, const void *_src, size_t size)
 
 	/* cache copy and flush to align dest */
 	if (!IS_ALIGNED(dest, 8)) {
-		unsigned len = min_t(unsigned, size, ALIGN(dest, 8) - dest);
+		size_t len = min_t(size_t, size, ALIGN(dest, 8) - dest);
 
 		memcpy((void *) dest, (void *) source, len);
 		clean_cache_range((void *) dest, len);
-- 
2.35.1

[PATCH 5.10 103/129] cifs: destage any unwritten data to the server before calling copychunk_write

[Greg Kroah-Hartman]

From: Ronnie Sahlberg <lsahlber@redhat.com>

[ Upstream commit f5d0f921ea362636e4a2efb7c38d1ead373a8700 ]

because the copychunk_write might cover a region of the file that has not yet
been sent to the server and thus fail.

A simple way to reproduce this is:
truncate -s 0 /mnt/testfile; strace -f -o x -ttT xfs_io -i -f -c 'pwrite 0k 128k' -c 'fcollapse 16k 24k' /mnt/testfile

the issue is that the 'pwrite 0k 128k' becomes rearranged on the wire with
the 'fcollapse 16k 24k' due to write-back caching.

fcollapse is implemented in cifs.ko as a SMB2 IOCTL(COPYCHUNK_WRITE) call
and it will fail serverside since the file is still 0b in size serverside
until the writes have been destaged.
To avoid this we must ensure that we destage any unwritten data to the
server before calling COPYCHUNK_WRITE.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1997373
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/smb2ops.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index 0e8f484031da..c758ff41b638 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -1744,9 +1744,17 @@ smb2_copychunk_range(const unsigned int xid,
 	int chunks_copied = 0;
 	bool chunk_sizes_updated = false;
 	ssize_t bytes_written, total_bytes_written = 0;
+	struct inode *inode;
 
 	pcchunk = kmalloc(sizeof(struct copychunk_ioctl), GFP_KERNEL);
 
+	/*
+	 * We need to flush all unwritten data before we can send the
+	 * copychunk ioctl to the server.
+	 */
+	inode = d_inode(trgtfile->dentry);
+	filemap_write_and_wait(inode->i_mapping);
+
 	if (pcchunk == NULL)
 		return -ENOMEM;
 
-- 
2.35.1

[PATCH 5.10 104/129] drivers: net: hippi: Fix deadlock in rr_close()

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit bc6de2878429e85c1f1afaa566f7b5abb2243eef ]

There is a deadlock in rr_close(), which is shown below:

   (Thread 1)                |      (Thread 2)
                             | rr_open()
rr_close()                   |  add_timer()
 spin_lock_irqsave() //(1)   |  (wait a time)
 ...                         | rr_timer()
 del_timer_sync()            |  spin_lock_irqsave() //(2)
 (wait timer to stop)        |  ...

We hold rrpriv->lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need rrpriv->lock in position (2) of thread 2.
As a result, rr_close() will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417125519.82618-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/hippi/rrunner.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c
index 22010384c4a3..b9646b369f8e 100644
--- a/drivers/net/hippi/rrunner.c
+++ b/drivers/net/hippi/rrunner.c
@@ -1353,7 +1353,9 @@ static int rr_close(struct net_device *dev)
 
 	rrpriv->fw_running = 0;
 
+	spin_unlock_irqrestore(&rrpriv->lock, flags);
 	del_timer_sync(&rrpriv->timer);
+	spin_lock_irqsave(&rrpriv->lock, flags);
 
 	writel(0, &regs->TxPi);
 	writel(0, &regs->IpRxPi);
-- 
2.35.1

[PATCH 5.10 105/129] powerpc/perf: Fix 32bit compile

[Greg Kroah-Hartman]

From: Alexey Kardashevskiy <aik@ozlabs.ru>

[ Upstream commit bb82c574691daf8f7fa9a160264d15c5804cb769 ]

The "read_bhrb" global symbol is only called under CONFIG_PPC64 of
arch/powerpc/perf/core-book3s.c but it is compiled for both 32 and 64 bit
anyway (and LLVM fails to link this on 32bit).

This fixes it by moving bhrb.o to obj64 targets.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220421025756.571995-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/perf/Makefile |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/powerpc/perf/Makefile
+++ b/arch/powerpc/perf/Makefile
@@ -5,11 +5,11 @@ ifdef CONFIG_COMPAT
 obj-$(CONFIG_PERF_EVENTS)	+= callchain_32.o
 endif
 
-obj-$(CONFIG_PPC_PERF_CTRS)	+= core-book3s.o bhrb.o
+obj-$(CONFIG_PPC_PERF_CTRS)	+= core-book3s.o
 obj64-$(CONFIG_PPC_PERF_CTRS)	+= ppc970-pmu.o power5-pmu.o \
 				   power5+-pmu.o power6-pmu.o power7-pmu.o \
 				   isa207-common.o power8-pmu.o power9-pmu.o \
-				   generic-compat-pmu.o power10-pmu.o
+				   generic-compat-pmu.o power10-pmu.o bhrb.o
 obj32-$(CONFIG_PPC_PERF_CTRS)	+= mpc7450-pmu.o
 
 obj-$(CONFIG_PPC_POWERNV)	+= imc-pmu.o

[PATCH 5.10 106/129] zonefs: Fix management of open zones

[Greg Kroah-Hartman]

From: Damien Le Moal <damien.lemoal@opensource.wdc.com>

commit 1da18a296f5ba4f99429e62a7cf4fdbefa598902 upstream.

The mount option "explicit_open" manages the device open zone
resources to ensure that if an application opens a sequential file for
writing, the file zone can always be written by explicitly opening
the zone and accounting for that state with the s_open_zones counter.

However, if some zones are already open when mounting, the device open
zone resource usage status will be larger than the initial s_open_zones
value of 0. Ensure that this inconsistency does not happen by closing
any sequential zone that is open when mounting.

Furthermore, with ZNS drives, closing an explicitly open zone that has
not been written will change the zone state to "closed", that is, the
zone will remain in an active state. Since this can then cause failures
of explicit open operations on other zones if the drive active zone
resources are exceeded, we need to make sure that the zone is not
active anymore by resetting it instead of closing it. To address this,
zonefs_zone_mgmt() is modified to change a REQ_OP_ZONE_CLOSE request
into a REQ_OP_ZONE_RESET for sequential zones that have not been
written.

Fixes: b5c00e975779 ("zonefs: open/close zone on file open/close")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/zonefs/super.c |   45 ++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 40 insertions(+), 5 deletions(-)

--- a/fs/zonefs/super.c
+++ b/fs/zonefs/super.c
@@ -32,6 +32,17 @@ static inline int zonefs_zone_mgmt(struc
 
 	lockdep_assert_held(&zi->i_truncate_mutex);
 
+	/*
+	 * With ZNS drives, closing an explicitly open zone that has not been
+	 * written will change the zone state to "closed", that is, the zone
+	 * will remain active. Since this can then cause failure of explicit
+	 * open operation on other zones if the drive active zone resources
+	 * are exceeded, make sure that the zone does not remain active by
+	 * resetting it.
+	 */
+	if (op == REQ_OP_ZONE_CLOSE && !zi->i_wpoffset)
+		op = REQ_OP_ZONE_RESET;
+
 	ret = blkdev_zone_mgmt(inode->i_sb->s_bdev, op, zi->i_zsector,
 			       zi->i_zone_size >> SECTOR_SHIFT, GFP_NOFS);
 	if (ret) {
@@ -1306,12 +1317,13 @@ static void zonefs_init_dir_inode(struct
 	inc_nlink(parent);
 }
 
-static void zonefs_init_file_inode(struct inode *inode, struct blk_zone *zone,
-				   enum zonefs_ztype type)
+static int zonefs_init_file_inode(struct inode *inode, struct blk_zone *zone,
+				  enum zonefs_ztype type)
 {
 	struct super_block *sb = inode->i_sb;
 	struct zonefs_sb_info *sbi = ZONEFS_SB(sb);
 	struct zonefs_inode_info *zi = ZONEFS_I(inode);
+	int ret = 0;
 
 	inode->i_ino = zone->start >> sbi->s_zone_sectors_shift;
 	inode->i_mode = S_IFREG | sbi->s_perm;
@@ -1336,6 +1348,22 @@ static void zonefs_init_file_inode(struc
 	sb->s_maxbytes = max(zi->i_max_size, sb->s_maxbytes);
 	sbi->s_blocks += zi->i_max_size >> sb->s_blocksize_bits;
 	sbi->s_used_blocks += zi->i_wpoffset >> sb->s_blocksize_bits;
+
+	/*
+	 * For sequential zones, make sure that any open zone is closed first
+	 * to ensure that the initial number of open zones is 0, in sync with
+	 * the open zone accounting done when the mount option
+	 * ZONEFS_MNTOPT_EXPLICIT_OPEN is used.
+	 */
+	if (type == ZONEFS_ZTYPE_SEQ &&
+	    (zone->cond == BLK_ZONE_COND_IMP_OPEN ||
+	     zone->cond == BLK_ZONE_COND_EXP_OPEN)) {
+		mutex_lock(&zi->i_truncate_mutex);
+		ret = zonefs_zone_mgmt(inode, REQ_OP_ZONE_CLOSE);
+		mutex_unlock(&zi->i_truncate_mutex);
+	}
+
+	return ret;
 }
 
 static struct dentry *zonefs_create_inode(struct dentry *parent,
@@ -1345,6 +1373,7 @@ static struct dentry *zonefs_create_inod
 	struct inode *dir = d_inode(parent);
 	struct dentry *dentry;
 	struct inode *inode;
+	int ret;
 
 	dentry = d_alloc_name(parent, name);
 	if (!dentry)
@@ -1355,10 +1384,16 @@ static struct dentry *zonefs_create_inod
 		goto dput;
 
 	inode->i_ctime = inode->i_mtime = inode->i_atime = dir->i_ctime;
-	if (zone)
-		zonefs_init_file_inode(inode, zone, type);
-	else
+	if (zone) {
+		ret = zonefs_init_file_inode(inode, zone, type);
+		if (ret) {
+			iput(inode);
+			goto dput;
+		}
+	} else {
 		zonefs_init_dir_inode(dir, inode, type);
+	}
+
 	d_add(dentry, inode);
 	dir->i_size++;
 

[PATCH 5.10 107/129] zonefs: Clear inode information flags on inode creation

[Greg Kroah-Hartman]

From: Damien Le Moal <damien.lemoal@opensource.wdc.com>

commit 694852ead287a3433126e7ebda397b242dc99624 upstream.

Ensure that the i_flags field of struct zonefs_inode_info is cleared to
0 when initializing a zone file inode, avoiding seeing the flag
ZONEFS_ZONE_OPEN being incorrectly set.

Fixes: b5c00e975779 ("zonefs: open/close zone on file open/close")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/zonefs/super.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/zonefs/super.c
+++ b/fs/zonefs/super.c
@@ -1163,6 +1163,7 @@ static struct inode *zonefs_alloc_inode(
 	mutex_init(&zi->i_truncate_mutex);
 	init_rwsem(&zi->i_mmap_sem);
 	zi->i_wr_refcnt = 0;
+	zi->i_flags = 0;
 
 	return &zi->i_vnode;
 }

[PATCH 5.10 108/129] kasan: prevent cpu_quarantine corruption when CPU offline and cache shrink occur at same time

[Greg Kroah-Hartman]

From: Zqiang <qiang1.zhang@intel.com>

commit 31fa985b4196f8a66f027672e9bf2b81fea0417c upstream.

kasan_quarantine_remove_cache() is called in kmem_cache_shrink()/
destroy().  The kasan_quarantine_remove_cache() call is protected by
cpuslock in kmem_cache_destroy() to ensure serialization with
kasan_cpu_offline().

However the kasan_quarantine_remove_cache() call is not protected by
cpuslock in kmem_cache_shrink().  When a CPU is going offline and cache
shrink occurs at same time, the cpu_quarantine may be corrupted by
interrupt (per_cpu_remove_cache operation).

So add a cpu_quarantine offline flags check in per_cpu_remove_cache().

[akpm@linux-foundation.org: add comment, per Zqiang]

Link: https://lkml.kernel.org/r/20220414025925.2423818-1-qiang1.zhang@intel.com
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/kasan/quarantine.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/mm/kasan/quarantine.c
+++ b/mm/kasan/quarantine.c
@@ -299,6 +299,13 @@ static void per_cpu_remove_cache(void *a
 	struct qlist_head *q;
 
 	q = this_cpu_ptr(&cpu_quarantine);
+	/*
+	 * Ensure the ordering between the writing to q->offline and
+	 * per_cpu_remove_cache.  Prevent cpu_quarantine from being corrupted
+	 * by interrupt.
+	 */
+	if (READ_ONCE(q->offline))
+		return;
 	qlist_move_cache(q, &to_free, cache);
 	qlist_free_all(&to_free, cache);
 }

[PATCH 5.10 109/129] drm/i915: Fix SEL_FETCH_PLANE_*(PIPE_B+) register addresses

[Greg Kroah-Hartman]

From: Imre Deak <imre.deak@intel.com>

commit 4ae4dd2e26fdfebf0b8c6af6c325383eadfefdb4 upstream.

Fix typo in the _SEL_FETCH_PLANE_BASE_1_B register base address.

Fixes: a5523e2ff074a5 ("drm/i915: Add PSR2 selective fetch registers")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: <stable@vger.kernel.org> # v5.9+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421162221.2261895-1-imre.deak@intel.com
(cherry picked from commit af2cbc6ef967f61711a3c40fca5366ea0bc7fecc)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/i915_reg.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7202,7 +7202,7 @@ enum {
 #define _SEL_FETCH_PLANE_BASE_6_A		0x70940
 #define _SEL_FETCH_PLANE_BASE_7_A		0x70960
 #define _SEL_FETCH_PLANE_BASE_CUR_A		0x70880
-#define _SEL_FETCH_PLANE_BASE_1_B		0x70990
+#define _SEL_FETCH_PLANE_BASE_1_B		0x71890
 
 #define _SEL_FETCH_PLANE_BASE_A(plane) _PICK(plane, \
 					     _SEL_FETCH_PLANE_BASE_1_A, \

[PATCH 5.10 110/129] net: ethernet: stmmac: fix write to sgmii_adapter_base

[Greg Kroah-Hartman]

From: Dinh Nguyen <dinguyen@kernel.org>

commit 5fd1fe4807f91ea0cca043114d929faa11bd4190 upstream.

I made a mistake with the commit a6aaa0032424 ("net: ethernet: stmmac:
fix altr_tse_pcs function when using a fixed-link"). I should have
tested against both scenario of having a SGMII interface and one
without.

Without the SGMII PCS TSE adpater, the sgmii_adapter_base address is
NULL, thus a write to this address will fail.

Cc: stable@vger.kernel.org
Fixes: a6aaa0032424 ("net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220420152345.27415-1-dinguyen@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -65,8 +65,9 @@ static void socfpga_dwmac_fix_mac_speed(
 	struct phy_device *phy_dev = ndev->phydev;
 	u32 val;
 
-	writew(SGMII_ADAPTER_DISABLE,
-	       sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
+	if (sgmii_adapter_base)
+		writew(SGMII_ADAPTER_DISABLE,
+		       sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
 
 	if (splitter_base) {
 		val = readl(splitter_base + EMAC_SPLITTER_CTRL_REG);
@@ -88,10 +89,11 @@ static void socfpga_dwmac_fix_mac_speed(
 		writel(val, splitter_base + EMAC_SPLITTER_CTRL_REG);
 	}
 
-	writew(SGMII_ADAPTER_ENABLE,
-	       sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
-	if (phy_dev)
+	if (phy_dev && sgmii_adapter_base) {
+		writew(SGMII_ADAPTER_ENABLE,
+		       sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
 		tse_pcs_fix_mac_speed(&dwmac->pcs, phy_dev, speed);
+	}
 }
 
 static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *dev)

[PATCH 5.10 111/129] thermal: int340x: Fix attr.show callback prototype

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

commit d0f6cfb2bd165b0aa307750e07e03420859bd554 upstream.

Control Flow Integrity (CFI) instrumentation of the kernel noticed that
the caller, dev_attr_show(), and the callback, odvp_show(), did not have
matching function prototypes, which would cause a CFI exception to be
raised. Correct the prototype by using struct device_attribute instead
of struct kobj_attribute.

Reported-and-tested-by: Joao Moreira <joao@overdrivepizza.com>
Link: https://lore.kernel.org/lkml/067ce8bd4c3968054509831fa2347f4f@overdrivepizza.com/
Fixes: 006f006f1e5c ("thermal/int340x_thermal: Export OEM vendor variables")
Cc: 5.8+ <stable@vger.kernel.org> # 5.8+
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/thermal/intel/int340x_thermal/int3400_thermal.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
+++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
@@ -67,7 +67,7 @@ static int evaluate_odvp(struct int3400_
 struct odvp_attr {
 	int odvp;
 	struct int3400_thermal_priv *priv;
-	struct kobj_attribute attr;
+	struct device_attribute attr;
 };
 
 static ssize_t data_vault_read(struct file *file, struct kobject *kobj,
@@ -269,7 +269,7 @@ static int int3400_thermal_run_osc(acpi_
 	return result;
 }
 
-static ssize_t odvp_show(struct kobject *kobj, struct kobj_attribute *attr,
+static ssize_t odvp_show(struct device *dev, struct device_attribute *attr,
 			 char *buf)
 {
 	struct odvp_attr *odvp_attr;

[PATCH 5.10 112/129] x86/cpu: Load microcode during restore_processor_state()

[Greg Kroah-Hartman]

From: Borislav Petkov <bp@suse.de>

commit f9e14dbbd454581061c736bf70bf5cbb15ac927c upstream.

When resuming from system sleep state, restore_processor_state()
restores the boot CPU MSRs. These MSRs could be emulated by microcode.
If microcode is not loaded yet, writing to emulated MSRs leads to
unchecked MSR access error:

  ...
  PM: Calling lapic_suspend+0x0/0x210
  unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0...0) at rIP: ... (native_write_msr)
  Call Trace:
    <TASK>
    ? restore_processor_state
    x86_acpi_suspend_lowlevel
    acpi_suspend_enter
    suspend_devices_and_enter
    pm_suspend.cold
    state_store
    kobj_attr_store
    sysfs_kf_write
    kernfs_fop_write_iter
    new_sync_write
    vfs_write
    ksys_write
    __x64_sys_write
    do_syscall_64
    entry_SYSCALL_64_after_hwframe
   RIP: 0033:0x7fda13c260a7

To ensure microcode emulated MSRs are available for restoration, load
the microcode on the boot CPU before restoring these MSRs.

  [ Pawan: write commit message and productize it. ]

Fixes: e2a1256b17b1 ("x86/speculation: Restore speculation related MSRs during S3 resume")
Reported-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Tested-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215841
Link: https://lore.kernel.org/r/4350dfbf785cd482d3fafa72b2b49c83102df3ce.1650386317.git.pawan.kumar.gupta@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/include/asm/microcode.h     |    2 ++
 arch/x86/kernel/cpu/microcode/core.c |    6 +++---
 arch/x86/power/cpu.c                 |   10 +++++++++-
 3 files changed, 14 insertions(+), 4 deletions(-)

--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -133,11 +133,13 @@ extern void load_ucode_ap(void);
 void reload_early_microcode(void);
 extern bool get_builtin_firmware(struct cpio_data *cd, const char *name);
 extern bool initrd_gone;
+void microcode_bsp_resume(void);
 #else
 static inline int __init microcode_init(void)			{ return 0; };
 static inline void __init load_ucode_bsp(void)			{ }
 static inline void load_ucode_ap(void)				{ }
 static inline void reload_early_microcode(void)			{ }
+static inline void microcode_bsp_resume(void)			{ }
 static inline bool
 get_builtin_firmware(struct cpio_data *cd, const char *name)	{ return false; }
 #endif
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -775,9 +775,9 @@ static struct subsys_interface mc_cpu_in
 };
 
 /**
- * mc_bp_resume - Update boot CPU microcode during resume.
+ * microcode_bsp_resume - Update boot CPU microcode during resume.
  */
-static void mc_bp_resume(void)
+void microcode_bsp_resume(void)
 {
 	int cpu = smp_processor_id();
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
@@ -789,7 +789,7 @@ static void mc_bp_resume(void)
 }
 
 static struct syscore_ops mc_syscore_ops = {
-	.resume			= mc_bp_resume,
+	.resume			= microcode_bsp_resume,
 };
 
 static int mc_cpu_starting(unsigned int cpu)
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -25,6 +25,7 @@
 #include <asm/cpu.h>
 #include <asm/mmu_context.h>
 #include <asm/cpu_device_id.h>
+#include <asm/microcode.h>
 
 #ifdef CONFIG_X86_32
 __visible unsigned long saved_context_ebx;
@@ -265,11 +266,18 @@ static void notrace __restore_processor_
 	x86_platform.restore_sched_clock_state();
 	mtrr_bp_restore();
 	perf_restore_debug_store();
-	msr_restore_context(ctxt);
 
 	c = &cpu_data(smp_processor_id());
 	if (cpu_has(c, X86_FEATURE_MSR_IA32_FEAT_CTL))
 		init_ia32_feat_ctl(c);
+
+	microcode_bsp_resume();
+
+	/*
+	 * This needs to happen after the microcode has been updated upon resume
+	 * because some of the MSRs are "emulated" in microcode.
+	 */
+	msr_restore_context(ctxt);
 }
 
 /* Needed by apm.c */

[PATCH 5.10 113/129] perf symbol: Pass is_kallsyms to symbols__fixup_end()

[Greg Kroah-Hartman]

From: Namhyung Kim <namhyung@kernel.org>

commit 838425f2defe5262906b698752d28fd2fca1aac2 upstream.

The symbol fixup is necessary for symbols in kallsyms since they don't
have size info.  So we use the next symbol's address to calculate the
size.  Now it's also used for user binaries because sometimes they miss
size for hand-written asm functions.

There's a arch-specific function to handle kallsyms differently but
currently it cannot distinguish kallsyms from others.  Pass this
information explicitly to handle it properly.  Note that those arch
functions will be moved to the generic function so I didn't added it to
the arch-functions.

Fixes: 3cf6a32f3f2a4594 ("perf symbols: Fix symbol size calculation condition")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-s390@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220416004048.1514900-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/symbol-elf.c |    2 +-
 tools/perf/util/symbol.c     |    7 ++++---
 tools/perf/util/symbol.h     |    2 +-
 3 files changed, 6 insertions(+), 5 deletions(-)

--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -1245,7 +1245,7 @@ int dso__load_sym(struct dso *dso, struc
 	 * For misannotated, zeroed, ASM function sizes.
 	 */
 	if (nr > 0) {
-		symbols__fixup_end(&dso->symbols);
+		symbols__fixup_end(&dso->symbols, false);
 		symbols__fixup_duplicate(&dso->symbols);
 		if (kmap) {
 			/*
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -217,7 +217,8 @@ again:
 	}
 }
 
-void symbols__fixup_end(struct rb_root_cached *symbols)
+void symbols__fixup_end(struct rb_root_cached *symbols,
+			bool is_kallsyms __maybe_unused)
 {
 	struct rb_node *nd, *prevnd = rb_first_cached(symbols);
 	struct symbol *curr, *prev;
@@ -1456,7 +1457,7 @@ int __dso__load_kallsyms(struct dso *dso
 	if (kallsyms__delta(kmap, filename, &delta))
 		return -1;
 
-	symbols__fixup_end(&dso->symbols);
+	symbols__fixup_end(&dso->symbols, true);
 	symbols__fixup_duplicate(&dso->symbols);
 
 	if (dso->kernel == DSO_SPACE__KERNEL_GUEST)
@@ -1651,7 +1652,7 @@ int dso__load_bfd_symbols(struct dso *ds
 #undef bfd_asymbol_section
 #endif
 
-	symbols__fixup_end(&dso->symbols);
+	symbols__fixup_end(&dso->symbols, false);
 	symbols__fixup_duplicate(&dso->symbols);
 	dso->adjust_symbols = 1;
 
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -192,7 +192,7 @@ void __symbols__insert(struct rb_root_ca
 		       bool kernel);
 void symbols__insert(struct rb_root_cached *symbols, struct symbol *sym);
 void symbols__fixup_duplicate(struct rb_root_cached *symbols);
-void symbols__fixup_end(struct rb_root_cached *symbols);
+void symbols__fixup_end(struct rb_root_cached *symbols, bool is_kallsyms);
 void maps__fixup_end(struct maps *maps);
 
 typedef int (*mapfn_t)(u64 start, u64 len, u64 pgoff, void *data);

[PATCH 5.10 113/129] perf symbol: Pass is_kallsyms to symbols__fixup_end()

[Greg Kroah-Hartman]

From: Namhyung Kim <namhyung@kernel.org>

commit 838425f2defe5262906b698752d28fd2fca1aac2 upstream.

The symbol fixup is necessary for symbols in kallsyms since they don't
have size info.  So we use the next symbol's address to calculate the
size.  Now it's also used for user binaries because sometimes they miss
size for hand-written asm functions.

There's a arch-specific function to handle kallsyms differently but
currently it cannot distinguish kallsyms from others.  Pass this
information explicitly to handle it properly.  Note that those arch
functions will be moved to the generic function so I didn't added it to
the arch-functions.

Fixes: 3cf6a32f3f2a4594 ("perf symbols: Fix symbol size calculation condition")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-s390@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220416004048.1514900-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/symbol-elf.c |    2 +-
 tools/perf/util/symbol.c     |    7 ++++---
 tools/perf/util/symbol.h     |    2 +-
 3 files changed, 6 insertions(+), 5 deletions(-)

--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -1245,7 +1245,7 @@ int dso__load_sym(struct dso *dso, struc
 	 * For misannotated, zeroed, ASM function sizes.
 	 */
 	if (nr > 0) {
-		symbols__fixup_end(&dso->symbols);
+		symbols__fixup_end(&dso->symbols, false);
 		symbols__fixup_duplicate(&dso->symbols);
 		if (kmap) {
 			/*
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -217,7 +217,8 @@ again:
 	}
 }
 
-void symbols__fixup_end(struct rb_root_cached *symbols)
+void symbols__fixup_end(struct rb_root_cached *symbols,
+			bool is_kallsyms __maybe_unused)
 {
 	struct rb_node *nd, *prevnd = rb_first_cached(symbols);
 	struct symbol *curr, *prev;
@@ -1456,7 +1457,7 @@ int __dso__load_kallsyms(struct dso *dso
 	if (kallsyms__delta(kmap, filename, &delta))
 		return -1;
 
-	symbols__fixup_end(&dso->symbols);
+	symbols__fixup_end(&dso->symbols, true);
 	symbols__fixup_duplicate(&dso->symbols);
 
 	if (dso->kernel == DSO_SPACE__KERNEL_GUEST)
@@ -1651,7 +1652,7 @@ int dso__load_bfd_symbols(struct dso *ds
 #undef bfd_asymbol_section
 #endif
 
-	symbols__fixup_end(&dso->symbols);
+	symbols__fixup_end(&dso->symbols, false);
 	symbols__fixup_duplicate(&dso->symbols);
 	dso->adjust_symbols = 1;
 
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -192,7 +192,7 @@ void __symbols__insert(struct rb_root_ca
 		       bool kernel);
 void symbols__insert(struct rb_root_cached *symbols, struct symbol *sym);
 void symbols__fixup_duplicate(struct rb_root_cached *symbols);
-void symbols__fixup_end(struct rb_root_cached *symbols);
+void symbols__fixup_end(struct rb_root_cached *symbols, bool is_kallsyms);
 void maps__fixup_end(struct maps *maps);
 
 typedef int (*mapfn_t)(u64 start, u64 len, u64 pgoff, void *data);

[PATCH 5.10 114/129] perf symbol: Update symbols__fixup_end()

[Greg Kroah-Hartman]

From: Namhyung Kim <namhyung@kernel.org>

commit 8799ebce84d672aae1dc3170510f6a3e66f96b11 upstream.

Now arch-specific functions all do the same thing.  When it fixes the
symbol address it needs to check the boundary between the kernel image
and modules.  For the last symbol in the previous region, it cannot
know the exact size as it's discarded already.  Thus it just uses a
small page size (4096) and rounds it up like the last symbol.

Fixes: 3cf6a32f3f2a4594 ("perf symbols: Fix symbol size calculation condition")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-s390@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220416004048.1514900-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/symbol.c |   29 +++++++++++++++++++++++++----
 1 file changed, 25 insertions(+), 4 deletions(-)

--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -217,8 +217,8 @@ again:
 	}
 }
 
-void symbols__fixup_end(struct rb_root_cached *symbols,
-			bool is_kallsyms __maybe_unused)
+/* Update zero-sized symbols using the address of the next symbol */
+void symbols__fixup_end(struct rb_root_cached *symbols, bool is_kallsyms)
 {
 	struct rb_node *nd, *prevnd = rb_first_cached(symbols);
 	struct symbol *curr, *prev;
@@ -232,8 +232,29 @@ void symbols__fixup_end(struct rb_root_c
 		prev = curr;
 		curr = rb_entry(nd, struct symbol, rb_node);
 
-		if (prev->end == prev->start || prev->end != curr->start)
-			arch__symbols__fixup_end(prev, curr);
+		/*
+		 * On some architecture kernel text segment start is located at
+		 * some low memory address, while modules are located at high
+		 * memory addresses (or vice versa).  The gap between end of
+		 * kernel text segment and beginning of first module's text
+		 * segment is very big.  Therefore do not fill this gap and do
+		 * not assign it to the kernel dso map (kallsyms).
+		 *
+		 * In kallsyms, it determines module symbols using '[' character
+		 * like in:
+		 *   ffffffffc1937000 T hdmi_driver_init  [snd_hda_codec_hdmi]
+		 */
+		if (prev->end == prev->start) {
+			/* Last kernel/module symbol mapped to end of page */
+			if (is_kallsyms && (!strchr(prev->name, '[') !=
+					    !strchr(curr->name, '[')))
+				prev->end = roundup(prev->end + 4096, 4096);
+			else
+				prev->end = curr->start;
+
+			pr_debug4("%s sym:%s end:%#" PRIx64 "\n",
+				  __func__, prev->name, prev->end);
+		}
 	}
 
 	/* Last entry */

[PATCH 5.10 114/129] perf symbol: Update symbols__fixup_end()

[Greg Kroah-Hartman]

From: Namhyung Kim <namhyung@kernel.org>

commit 8799ebce84d672aae1dc3170510f6a3e66f96b11 upstream.

Now arch-specific functions all do the same thing.  When it fixes the
symbol address it needs to check the boundary between the kernel image
and modules.  For the last symbol in the previous region, it cannot
know the exact size as it's discarded already.  Thus it just uses a
small page size (4096) and rounds it up like the last symbol.

Fixes: 3cf6a32f3f2a4594 ("perf symbols: Fix symbol size calculation condition")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-s390@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220416004048.1514900-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/symbol.c |   29 +++++++++++++++++++++++++----
 1 file changed, 25 insertions(+), 4 deletions(-)

--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -217,8 +217,8 @@ again:
 	}
 }
 
-void symbols__fixup_end(struct rb_root_cached *symbols,
-			bool is_kallsyms __maybe_unused)
+/* Update zero-sized symbols using the address of the next symbol */
+void symbols__fixup_end(struct rb_root_cached *symbols, bool is_kallsyms)
 {
 	struct rb_node *nd, *prevnd = rb_first_cached(symbols);
 	struct symbol *curr, *prev;
@@ -232,8 +232,29 @@ void symbols__fixup_end(struct rb_root_c
 		prev = curr;
 		curr = rb_entry(nd, struct symbol, rb_node);
 
-		if (prev->end == prev->start || prev->end != curr->start)
-			arch__symbols__fixup_end(prev, curr);
+		/*
+		 * On some architecture kernel text segment start is located at
+		 * some low memory address, while modules are located at high
+		 * memory addresses (or vice versa).  The gap between end of
+		 * kernel text segment and beginning of first module's text
+		 * segment is very big.  Therefore do not fill this gap and do
+		 * not assign it to the kernel dso map (kallsyms).
+		 *
+		 * In kallsyms, it determines module symbols using '[' character
+		 * like in:
+		 *   ffffffffc1937000 T hdmi_driver_init  [snd_hda_codec_hdmi]
+		 */
+		if (prev->end == prev->start) {
+			/* Last kernel/module symbol mapped to end of page */
+			if (is_kallsyms && (!strchr(prev->name, '[') !=
+					    !strchr(curr->name, '[')))
+				prev->end = roundup(prev->end + 4096, 4096);
+			else
+				prev->end = curr->start;
+
+			pr_debug4("%s sym:%s end:%#" PRIx64 "\n",
+				  __func__, prev->name, prev->end);
+		}
 	}
 
 	/* Last entry */

[PATCH 5.10 115/129] tty: n_gsm: fix restart handling via CLD command

[Greg Kroah-Hartman]

From: Daniel Starke <daniel.starke@siemens.com>

commit aa371e96f05dcb36a88298f5cb70aa7234d5e8b8 upstream.

n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.8.2 states that both sides will revert to
the non-multiplexed mode via a close-down message (CLD). The usual program
flow is as following:
- start multiplex mode by sending AT+CMUX to the mobile
- establish the control channel (DLCI 0)
- establish user channels (DLCI >0)
- terminate user channels
- send close-down message (CLD)
- revert to AT protocol (i.e. leave multiplexed mode)

The AT protocol is out of scope of the n_gsm driver. However,
gsm_disconnect() sends CLD if gsm_config() detects that the requested
parameters require the mux protocol to restart. The next immediate action
is to start the mux protocol by opening DLCI 0 again. Any responder side
which handles CLD commands correctly forces us to fail at this point
because AT+CMUX needs to be sent to the mobile to start the mux again.
Therefore, remove the CLD command in this phase and keep both sides in
multiplexed mode.
Remove the gsm_disconnect() function as it become unnecessary and merge the
remaining parts into gsm_cleanup_mux() to handle the termination order and
locking correctly.

Fixes: 71e077915396 ("tty: n_gsm: do not send/receive in ldisc close path")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-2-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_gsm.c |   68 +++++++++++++++-------------------------------------
 1 file changed, 20 insertions(+), 48 deletions(-)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2040,49 +2040,35 @@ static void gsm_error(struct gsm_mux *gs
 	gsm->io_error++;
 }
 
-static int gsm_disconnect(struct gsm_mux *gsm)
-{
-	struct gsm_dlci *dlci = gsm->dlci[0];
-	struct gsm_control *gc;
-
-	if (!dlci)
-		return 0;
-
-	/* In theory disconnecting DLCI 0 is sufficient but for some
-	   modems this is apparently not the case. */
-	gc = gsm_control_send(gsm, CMD_CLD, NULL, 0);
-	if (gc)
-		gsm_control_wait(gsm, gc);
-
-	del_timer_sync(&gsm->t2_timer);
-	/* Now we are sure T2 has stopped */
-
-	gsm_dlci_begin_close(dlci);
-	wait_event_interruptible(gsm->event,
-				dlci->state == DLCI_CLOSED);
-
-	if (signal_pending(current))
-		return -EINTR;
-
-	return 0;
-}
-
 /**
  *	gsm_cleanup_mux		-	generic GSM protocol cleanup
  *	@gsm: our mux
+ *	@disc: disconnect link?
  *
  *	Clean up the bits of the mux which are the same for all framing
  *	protocols. Remove the mux from the mux table, stop all the timers
  *	and then shut down each device hanging up the channels as we go.
  */
 
-static void gsm_cleanup_mux(struct gsm_mux *gsm)
+static void gsm_cleanup_mux(struct gsm_mux *gsm, bool disc)
 {
 	int i;
 	struct gsm_dlci *dlci = gsm->dlci[0];
 	struct gsm_msg *txq, *ntxq;
 
 	gsm->dead = true;
+	mutex_lock(&gsm->mutex);
+
+	if (dlci) {
+		if (disc && dlci->state != DLCI_CLOSED) {
+			gsm_dlci_begin_close(dlci);
+			wait_event(gsm->event, dlci->state == DLCI_CLOSED);
+		}
+		dlci->dead = true;
+	}
+
+	/* Finish outstanding timers, making sure they are done */
+	del_timer_sync(&gsm->t2_timer);
 
 	spin_lock(&gsm_mux_lock);
 	for (i = 0; i < MAX_MUX; i++) {
@@ -2096,13 +2082,7 @@ static void gsm_cleanup_mux(struct gsm_m
 	if (i == MAX_MUX)
 		return;
 
-	del_timer_sync(&gsm->t2_timer);
-	/* Now we are sure T2 has stopped */
-	if (dlci)
-		dlci->dead = true;
-
 	/* Free up any link layer users */
-	mutex_lock(&gsm->mutex);
 	for (i = 0; i < NUM_DLCI; i++)
 		if (gsm->dlci[i])
 			gsm_dlci_release(gsm->dlci[i]);
@@ -2304,19 +2284,11 @@ static int gsm_config(struct gsm_mux *gs
 
 	/*
 	 * Close down what is needed, restart and initiate the new
-	 * configuration
+	 * configuration. On the first time there is no DLCI[0]
+	 * and closing or cleaning up is not necessary.
 	 */
-
-	if (need_close || need_restart) {
-		int ret;
-
-		ret = gsm_disconnect(gsm);
-
-		if (ret)
-			return ret;
-	}
-	if (need_restart)
-		gsm_cleanup_mux(gsm);
+	if (need_close || need_restart)
+		gsm_cleanup_mux(gsm, true);
 
 	gsm->initiator = c->initiator;
 	gsm->mru = c->mru;
@@ -2425,7 +2397,7 @@ static void gsmld_detach_gsm(struct tty_
 	WARN_ON(tty != gsm->tty);
 	for (i = 1; i < NUM_DLCI; i++)
 		tty_unregister_device(gsm_tty_driver, base + i);
-	gsm_cleanup_mux(gsm);
+	gsm_cleanup_mux(gsm, false);
 	tty_kref_put(gsm->tty);
 	gsm->tty = NULL;
 }
@@ -2531,7 +2503,7 @@ static int gsmld_open(struct tty_struct
 
 	ret = gsmld_attach_gsm(tty, gsm);
 	if (ret != 0) {
-		gsm_cleanup_mux(gsm);
+		gsm_cleanup_mux(gsm, false);
 		mux_put(gsm);
 	}
 	return ret;

[PATCH 5.10 116/129] tty: n_gsm: fix decoupled mux resource

[Greg Kroah-Hartman]

From: Daniel Starke <daniel.starke@siemens.com>

commit 1ec92e9742774bf42614fceea3bf6b50c9409225 upstream.

The active mux instances are managed in the gsm_mux array and via mux_get()
and mux_put() functions separately. This gives a very loose coupling
between the actual instance and the gsm_mux array which manages it. It also
results in unnecessary lockings which makes it prone to failures. And it
creates a race condition if more than the maximum number of mux instances
are requested while the user changes the parameters of an active instance.
The user may loose ownership of the current mux instance in this case.
Fix this by moving the gsm_mux array handling to the mux allocation and
deallocation functions.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-3-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_gsm.c |   63 +++++++++++++++++++++++++++++++---------------------
 1 file changed, 38 insertions(+), 25 deletions(-)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2070,18 +2070,6 @@ static void gsm_cleanup_mux(struct gsm_m
 	/* Finish outstanding timers, making sure they are done */
 	del_timer_sync(&gsm->t2_timer);
 
-	spin_lock(&gsm_mux_lock);
-	for (i = 0; i < MAX_MUX; i++) {
-		if (gsm_mux[i] == gsm) {
-			gsm_mux[i] = NULL;
-			break;
-		}
-	}
-	spin_unlock(&gsm_mux_lock);
-	/* open failed before registering => nothing to do */
-	if (i == MAX_MUX)
-		return;
-
 	/* Free up any link layer users */
 	for (i = 0; i < NUM_DLCI; i++)
 		if (gsm->dlci[i])
@@ -2105,7 +2093,6 @@ static void gsm_cleanup_mux(struct gsm_m
 static int gsm_activate_mux(struct gsm_mux *gsm)
 {
 	struct gsm_dlci *dlci;
-	int i = 0;
 
 	timer_setup(&gsm->t2_timer, gsm_control_retransmit, 0);
 	init_waitqueue_head(&gsm->event);
@@ -2117,18 +2104,6 @@ static int gsm_activate_mux(struct gsm_m
 	else
 		gsm->receive = gsm1_receive;
 
-	spin_lock(&gsm_mux_lock);
-	for (i = 0; i < MAX_MUX; i++) {
-		if (gsm_mux[i] == NULL) {
-			gsm->num = i;
-			gsm_mux[i] = gsm;
-			break;
-		}
-	}
-	spin_unlock(&gsm_mux_lock);
-	if (i == MAX_MUX)
-		return -EBUSY;
-
 	dlci = gsm_dlci_alloc(gsm, 0);
 	if (dlci == NULL)
 		return -ENOMEM;
@@ -2144,6 +2119,15 @@ static int gsm_activate_mux(struct gsm_m
  */
 static void gsm_free_mux(struct gsm_mux *gsm)
 {
+	int i;
+
+	for (i = 0; i < MAX_MUX; i++) {
+		if (gsm == gsm_mux[i]) {
+			gsm_mux[i] = NULL;
+			break;
+		}
+	}
+	mutex_destroy(&gsm->mutex);
 	kfree(gsm->txframe);
 	kfree(gsm->buf);
 	kfree(gsm);
@@ -2163,12 +2147,20 @@ static void gsm_free_muxr(struct kref *r
 
 static inline void mux_get(struct gsm_mux *gsm)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(&gsm_mux_lock, flags);
 	kref_get(&gsm->ref);
+	spin_unlock_irqrestore(&gsm_mux_lock, flags);
 }
 
 static inline void mux_put(struct gsm_mux *gsm)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(&gsm_mux_lock, flags);
 	kref_put(&gsm->ref, gsm_free_muxr);
+	spin_unlock_irqrestore(&gsm_mux_lock, flags);
 }
 
 static inline unsigned int mux_num_to_base(struct gsm_mux *gsm)
@@ -2189,6 +2181,7 @@ static inline unsigned int mux_line_to_n
 
 static struct gsm_mux *gsm_alloc_mux(void)
 {
+	int i;
 	struct gsm_mux *gsm = kzalloc(sizeof(struct gsm_mux), GFP_KERNEL);
 	if (gsm == NULL)
 		return NULL;
@@ -2218,6 +2211,26 @@ static struct gsm_mux *gsm_alloc_mux(voi
 	gsm->mtu = 64;
 	gsm->dead = true;	/* Avoid early tty opens */
 
+	/* Store the instance to the mux array or abort if no space is
+	 * available.
+	 */
+	spin_lock(&gsm_mux_lock);
+	for (i = 0; i < MAX_MUX; i++) {
+		if (!gsm_mux[i]) {
+			gsm_mux[i] = gsm;
+			gsm->num = i;
+			break;
+		}
+	}
+	spin_unlock(&gsm_mux_lock);
+	if (i == MAX_MUX) {
+		mutex_destroy(&gsm->mutex);
+		kfree(gsm->txframe);
+		kfree(gsm->buf);
+		kfree(gsm);
+		return NULL;
+	}
+
 	return gsm;
 }
 

[PATCH 5.10 117/129] tty: n_gsm: fix mux cleanup after unregister tty device

[Greg Kroah-Hartman]

From: Daniel Starke <daniel.starke@siemens.com>

commit 284260f278b706364fb4c88a7b56ba5298d5973c upstream.

Internally, we manage the alive state of the mux channels and mux itself
with the field member 'dead'. This makes it possible to notify the user
if the accessed underlying link is already gone. On the other hand,
however, removing the virtual ttys before terminating the channels may
result in peer messages being received without any internal target. Move
the mux cleanup procedure from gsmld_detach_gsm() to gsmld_close() to fix
this by keeping the virtual ttys open until the mux has been cleaned up.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-4-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_gsm.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2410,7 +2410,6 @@ static void gsmld_detach_gsm(struct tty_
 	WARN_ON(tty != gsm->tty);
 	for (i = 1; i < NUM_DLCI; i++)
 		tty_unregister_device(gsm_tty_driver, base + i);
-	gsm_cleanup_mux(gsm, false);
 	tty_kref_put(gsm->tty);
 	gsm->tty = NULL;
 }
@@ -2478,6 +2477,12 @@ static void gsmld_close(struct tty_struc
 {
 	struct gsm_mux *gsm = tty->disc_data;
 
+	/* The ldisc locks and closes the port before calling our close. This
+	 * means we have no way to do a proper disconnect. We will not bother
+	 * to do one.
+	 */
+	gsm_cleanup_mux(gsm, false);
+
 	gsmld_detach_gsm(tty, gsm);
 
 	gsmld_flush_buffer(tty);

[PATCH 5.10 118/129] tty: n_gsm: fix wrong signal octet encoding in convergence layer type 2

[Greg Kroah-Hartman]

From: Daniel Starke <daniel.starke@siemens.com>

commit 06d5afd4d640eea67f5623e76cd5fc03359b7f3c upstream.

n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.5.2 describes that the signal octet in
convergence layer type 2 can be either one or two bytes. The length is
encoded in the EA bit. This is set 1 for the last byte in the sequence.
gsmtty_modem_update() handles this correctly but gsm_dlci_data_output()
fails to set EA to 1. There is no case in which we encode two signal octets
as there is no case in which we send out a break signal.
Therefore, always set the EA bit to 1 for the signal octet to fix this.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-5-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_gsm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -818,7 +818,7 @@ static int gsm_dlci_data_output(struct g
 			break;
 		case 2:	/* Unstructed with modem bits.
 		Always one byte as we never send inline break data */
-			*dp++ = gsm_encode_modem(dlci);
+			*dp++ = (gsm_encode_modem(dlci) << 1) | EA;
 			break;
 		}
 		WARN_ON(kfifo_out_locked(&dlci->fifo, dp , len, &dlci->lock) != len);

[PATCH 5.10 119/129] tty: n_gsm: fix malformed counter for out of frame data

[Greg Kroah-Hartman]

From: Daniel Starke <daniel.starke@siemens.com>

commit a24b4b2f660b7ddf3f484b37600bba382cb28a9d upstream.

The gsm_mux field 'malformed' represents the number of malformed frames
received. However, gsm1_receive() also increases this counter for any out
of frame byte.
Fix this by ignoring out of frame data for the malformed counter.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-7-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_gsm.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1968,7 +1968,8 @@ static void gsm1_receive(struct gsm_mux
 		}
 		/* Any partial frame was a runt so go back to start */
 		if (gsm->state != GSM_START) {
-			gsm->malformed++;
+			if (gsm->state != GSM_SEARCH)
+				gsm->malformed++;
 			gsm->state = GSM_START;
 		}
 		/* A SOF in GSM_START means we are still reading idling or

[PATCH 5.10 120/129] netfilter: nft_socket: only do sk lookups when indev is available

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

commit 743b83f15d4069ea57c3e40996bf4a1077e0cdc1 upstream.

Check if the incoming interface is available and NFT_BREAK
in case neither skb->sk nor input device are set.

Because nf_sk_lookup_slow*() assume packet headers are in the
'in' direction, use in postrouting is not going to yield a meaningful
result.  Same is true for the forward chain, so restrict the use
to prerouting, input and output.

Use in output work if a socket is already attached to the skb.

Fixes: 554ced0a6e29 ("netfilter: nf_tables: add support for native socket matching")
Reported-and-tested-by: Topi Miettinen <toiwoton@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nft_socket.c |   52 ++++++++++++++++++++++++++++++++-------------
 1 file changed, 38 insertions(+), 14 deletions(-)

--- a/net/netfilter/nft_socket.c
+++ b/net/netfilter/nft_socket.c
@@ -33,6 +33,32 @@ static void nft_socket_wildcard(const st
 	}
 }
 
+static struct sock *nft_socket_do_lookup(const struct nft_pktinfo *pkt)
+{
+	const struct net_device *indev = nft_in(pkt);
+	const struct sk_buff *skb = pkt->skb;
+	struct sock *sk = NULL;
+
+	if (!indev)
+		return NULL;
+
+	switch (nft_pf(pkt)) {
+	case NFPROTO_IPV4:
+		sk = nf_sk_lookup_slow_v4(nft_net(pkt), skb, indev);
+		break;
+#if IS_ENABLED(CONFIG_NF_TABLES_IPV6)
+	case NFPROTO_IPV6:
+		sk = nf_sk_lookup_slow_v6(nft_net(pkt), skb, indev);
+		break;
+#endif
+	default:
+		WARN_ON_ONCE(1);
+		break;
+	}
+
+	return sk;
+}
+
 static void nft_socket_eval(const struct nft_expr *expr,
 			    struct nft_regs *regs,
 			    const struct nft_pktinfo *pkt)
@@ -46,20 +72,7 @@ static void nft_socket_eval(const struct
 		sk = NULL;
 
 	if (!sk)
-		switch(nft_pf(pkt)) {
-		case NFPROTO_IPV4:
-			sk = nf_sk_lookup_slow_v4(nft_net(pkt), skb, nft_in(pkt));
-			break;
-#if IS_ENABLED(CONFIG_NF_TABLES_IPV6)
-		case NFPROTO_IPV6:
-			sk = nf_sk_lookup_slow_v6(nft_net(pkt), skb, nft_in(pkt));
-			break;
-#endif
-		default:
-			WARN_ON_ONCE(1);
-			regs->verdict.code = NFT_BREAK;
-			return;
-		}
+		sk = nft_socket_do_lookup(pkt);
 
 	if (!sk) {
 		regs->verdict.code = NFT_BREAK;
@@ -150,6 +163,16 @@ static int nft_socket_dump(struct sk_buf
 	return 0;
 }
 
+static int nft_socket_validate(const struct nft_ctx *ctx,
+			       const struct nft_expr *expr,
+			       const struct nft_data **data)
+{
+	return nft_chain_validate_hooks(ctx->chain,
+					(1 << NF_INET_PRE_ROUTING) |
+					(1 << NF_INET_LOCAL_IN) |
+					(1 << NF_INET_LOCAL_OUT));
+}
+
 static struct nft_expr_type nft_socket_type;
 static const struct nft_expr_ops nft_socket_ops = {
 	.type		= &nft_socket_type,
@@ -157,6 +180,7 @@ static const struct nft_expr_ops nft_soc
 	.eval		= nft_socket_eval,
 	.init		= nft_socket_init,
 	.dump		= nft_socket_dump,
+	.validate	= nft_socket_validate,
 };
 
 static struct nft_expr_type nft_socket_type __read_mostly = {

[PATCH 5.10 121/129] tty: n_gsm: fix insufficient txframe size

[Greg Kroah-Hartman]

From: Daniel Starke <daniel.starke@siemens.com>

commit 535bf600de75a859698892ee873521a48d289ec1 upstream.

n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.7.2 states that the maximum frame size
(N1) refers to the length of the information field (i.e. user payload).
However, 'txframe' stores the whole frame including frame header, checksum
and start/end flags. We also need to consider the byte stuffing overhead.
Define constant for the protocol overhead and adjust the 'txframe' size
calculation accordingly to reserve enough space for a complete mux frame
including byte stuffing for advanced option mode. Note that no byte
stuffing is applied to the start and end flag.
Also use MAX_MTU instead of MAX_MRU as this buffer is used for data
transmission.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-8-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_gsm.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -72,6 +72,8 @@ module_param(debug, int, 0600);
  */
 #define MAX_MRU 1500
 #define MAX_MTU 1500
+/* SOF, ADDR, CTRL, LEN1, LEN2, ..., FCS, EOF */
+#define PROT_OVERHEAD 7
 #define	GSM_NET_TX_TIMEOUT (HZ*10)
 
 /**
@@ -2191,7 +2193,7 @@ static struct gsm_mux *gsm_alloc_mux(voi
 		kfree(gsm);
 		return NULL;
 	}
-	gsm->txframe = kmalloc(2 * MAX_MRU + 2, GFP_KERNEL);
+	gsm->txframe = kmalloc(2 * (MAX_MTU + PROT_OVERHEAD - 1), GFP_KERNEL);
 	if (gsm->txframe == NULL) {
 		kfree(gsm->buf);
 		kfree(gsm);

[PATCH 5.10 122/129] tty: n_gsm: fix wrong DLCI release order

[Greg Kroah-Hartman]

From: Daniel Starke <daniel.starke@siemens.com>

commit deefc58bafb4841df7f0a0d85d89a1c819db9743 upstream.

The current DLCI release order starts with the control channel followed by
the user channels. Reverse this order to keep the control channel open
until all user channels have been released.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-9-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_gsm.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2073,8 +2073,8 @@ static void gsm_cleanup_mux(struct gsm_m
 	/* Finish outstanding timers, making sure they are done */
 	del_timer_sync(&gsm->t2_timer);
 
-	/* Free up any link layer users */
-	for (i = 0; i < NUM_DLCI; i++)
+	/* Free up any link layer users and finally the control channel */
+	for (i = NUM_DLCI - 1; i >= 0; i--)
 		if (gsm->dlci[i])
 			gsm_dlci_release(gsm->dlci[i]);
 	mutex_unlock(&gsm->mutex);

[PATCH 5.10 123/129] tty: n_gsm: fix missing explicit ldisc flush

[Greg Kroah-Hartman]

From: Daniel Starke <daniel.starke@siemens.com>

commit 17eac652028501df7ea296b1d9b9c134db262b7d upstream.

In gsm_cleanup_mux() the muxer is closed down and all queues are removed.
However, removing the queues is done without explicit control of the
underlying buffers. Flush those before freeing up our queues to ensure
that all outgoing queues are cleared consistently. Otherwise, a new mux
connection establishment attempt may time out while the underlying tty is
still busy sending out the remaining data from the previous connection.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-10-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_gsm.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2079,6 +2079,7 @@ static void gsm_cleanup_mux(struct gsm_m
 			gsm_dlci_release(gsm->dlci[i]);
 	mutex_unlock(&gsm->mutex);
 	/* Now wipe the queues */
+	tty_ldisc_flush(gsm->tty);
 	list_for_each_entry_safe(txq, ntxq, &gsm->tx_list, list)
 		kfree(txq);
 	INIT_LIST_HEAD(&gsm->tx_list);

[PATCH 5.10 124/129] tty: n_gsm: fix wrong command retry handling

[Greg Kroah-Hartman]

From: Daniel Starke <daniel.starke@siemens.com>

commit d0bcdffcad5a22f202e3bf37190c0dd8c080ea92 upstream.

n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.7.3 states that the valid range for the
maximum number of retransmissions (N2) is from 0 to 255 (both including).
gsm_config() fails to limit this range correctly. Furthermore,
gsm_control_retransmit() handles this number incorrectly by performing
N2 - 1 retransmission attempts. Setting N2 to zero results in more than 255
retransmission attempts.
Fix the range check in gsm_config() and the value handling in
gsm_control_send() and gsm_control_retransmit() to comply with 3GPP 27.010.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-11-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_gsm.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1324,7 +1324,6 @@ static void gsm_control_retransmit(struc
 	spin_lock_irqsave(&gsm->control_lock, flags);
 	ctrl = gsm->pending_cmd;
 	if (ctrl) {
-		gsm->cretries--;
 		if (gsm->cretries == 0) {
 			gsm->pending_cmd = NULL;
 			ctrl->error = -ETIMEDOUT;
@@ -1333,6 +1332,7 @@ static void gsm_control_retransmit(struc
 			wake_up(&gsm->event);
 			return;
 		}
+		gsm->cretries--;
 		gsm_control_transmit(gsm, ctrl);
 		mod_timer(&gsm->t2_timer, jiffies + gsm->t2 * HZ / 100);
 	}
@@ -1373,7 +1373,7 @@ retry:
 
 	/* If DLCI0 is in ADM mode skip retries, it won't respond */
 	if (gsm->dlci[0]->mode == DLCI_MODE_ADM)
-		gsm->cretries = 1;
+		gsm->cretries = 0;
 	else
 		gsm->cretries = gsm->n2;
 
@@ -2270,7 +2270,7 @@ static int gsm_config(struct gsm_mux *gs
 	/* Check the MRU/MTU range looks sane */
 	if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8)
 		return -EINVAL;
-	if (c->n2 < 3)
+	if (c->n2 > 255)
 		return -EINVAL;
 	if (c->encapsulation > 1)	/* Basic, advanced, no I */
 		return -EINVAL;

[PATCH 5.10 125/129] tty: n_gsm: fix wrong command frame length field encoding

[Greg Kroah-Hartman]

From: Daniel Starke <daniel.starke@siemens.com>

commit 398867f59f956985f4c324f173eff7b946e14bd8 upstream.

n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.6.1 states that each command frame shall
be made up from type, length and value. Looking for example in chapter
5.4.6.3.5 at the description for the encoding of a flow control on command
it becomes obvious, that the type and length field is always present
whereas the value may be zero bytes long. The current implementation omits
the length field if the value is not present. This is wrong.
Correct this by always sending the length in gsm_control_transmit().
So far only the modem status command (MSC) has included a value and encoded
its length directly. Therefore, also change gsmtty_modem_update().

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-12-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_gsm.c |   23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1297,11 +1297,12 @@ static void gsm_control_response(struct
 
 static void gsm_control_transmit(struct gsm_mux *gsm, struct gsm_control *ctrl)
 {
-	struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 1, gsm->ftype);
+	struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 2, gsm->ftype);
 	if (msg == NULL)
 		return;
-	msg->data[0] = (ctrl->cmd << 1) | 2 | EA;	/* command */
-	memcpy(msg->data + 1, ctrl->data, ctrl->len);
+	msg->data[0] = (ctrl->cmd << 1) | CR | EA;	/* command */
+	msg->data[1] = (ctrl->len << 1) | EA;
+	memcpy(msg->data + 2, ctrl->data, ctrl->len);
 	gsm_data_queue(gsm->dlci[0], msg);
 }
 
@@ -2882,19 +2883,17 @@ static struct tty_ldisc_ops tty_ldisc_pa
 
 static int gsmtty_modem_update(struct gsm_dlci *dlci, u8 brk)
 {
-	u8 modembits[5];
+	u8 modembits[3];
 	struct gsm_control *ctrl;
 	int len = 2;
 
-	if (brk)
+	modembits[0] = (dlci->addr << 2) | 2 | EA;  /* DLCI, Valid, EA */
+	modembits[1] = (gsm_encode_modem(dlci) << 1) | EA;
+	if (brk) {
+		modembits[2] = (brk << 4) | 2 | EA; /* Length, Break, EA */
 		len++;
-
-	modembits[0] = len << 1 | EA;		/* Data bytes */
-	modembits[1] = dlci->addr << 2 | 3;	/* DLCI, EA, 1 */
-	modembits[2] = gsm_encode_modem(dlci) << 1 | EA;
-	if (brk)
-		modembits[3] = brk << 4 | 2 | EA;	/* Valid, EA */
-	ctrl = gsm_control_send(dlci->gsm, CMD_MSC, modembits, len + 1);
+	}
+	ctrl = gsm_control_send(dlci->gsm, CMD_MSC, modembits, len);
 	if (ctrl == NULL)
 		return -ENOMEM;
 	return gsm_control_wait(dlci->gsm, ctrl);

[PATCH 5.10 126/129] tty: n_gsm: fix reset fifo race condition

[Greg Kroah-Hartman]

From: Daniel Starke <daniel.starke@siemens.com>

commit 73029a4d7161f8b6c0934553145ef574d2d0c645 upstream.

gsmtty_write() and gsm_dlci_data_output() properly guard the fifo access.
However, gsm_dlci_close() and gsmtty_flush_buffer() modifies the fifo but
do not guard this.
Add a guard here to prevent race conditions on parallel writes to the fifo.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-17-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_gsm.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1422,13 +1422,17 @@ static int gsm_control_wait(struct gsm_m
 
 static void gsm_dlci_close(struct gsm_dlci *dlci)
 {
+	unsigned long flags;
+
 	del_timer(&dlci->t1);
 	if (debug & 8)
 		pr_debug("DLCI %d goes closed.\n", dlci->addr);
 	dlci->state = DLCI_CLOSED;
 	if (dlci->addr != 0) {
 		tty_port_tty_hangup(&dlci->port, false);
+		spin_lock_irqsave(&dlci->lock, flags);
 		kfifo_reset(&dlci->fifo);
+		spin_unlock_irqrestore(&dlci->lock, flags);
 		/* Ensure that gsmtty_open() can return. */
 		tty_port_set_initialized(&dlci->port, 0);
 		wake_up_interruptible(&dlci->port.open_wait);
@@ -3078,13 +3082,17 @@ static int gsmtty_chars_in_buffer(struct
 static void gsmtty_flush_buffer(struct tty_struct *tty)
 {
 	struct gsm_dlci *dlci = tty->driver_data;
+	unsigned long flags;
+
 	if (dlci->state == DLCI_CLOSED)
 		return;
 	/* Caution needed: If we implement reliable transport classes
 	   then the data being transmitted can't simply be junked once
 	   it has first hit the stack. Until then we can just blow it
 	   away */
+	spin_lock_irqsave(&dlci->lock, flags);
 	kfifo_reset(&dlci->fifo);
+	spin_unlock_irqrestore(&dlci->lock, flags);
 	/* Need to unhook this DLCI from the transmit queue logic */
 }
 

[PATCH 5.10 127/129] tty: n_gsm: fix incorrect UA handling

[Greg Kroah-Hartman]

From: Daniel Starke <daniel.starke@siemens.com>

commit ff9166c623704337bd6fe66fce2838d9768a6634 upstream.

n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.4.2 states that any received unnumbered
acknowledgment (UA) with its poll/final (PF) bit set to 0 shall be
discarded. Currently, all UA frame are handled in the same way regardless
of the PF bit. This does not comply with the standard.
Remove the UA case in gsm_queue() to process only UA frames with PF bit set
to 1 to abide the standard.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-20-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_gsm.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1817,7 +1817,6 @@ static void gsm_queue(struct gsm_mux *gs
 		gsm_response(gsm, address, UA);
 		gsm_dlci_close(dlci);
 		break;
-	case UA:
 	case UA|PF:
 		if (cr == 0 || dlci == NULL)
 			break;

[PATCH 5.10 128/129] tty: n_gsm: fix software flow control handling

[Greg Kroah-Hartman]

From: Daniel Starke <daniel.starke@siemens.com>

commit f4f7d63287217ba25e5c80f5faae5e4f7118790e upstream.

n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.8.1 states that XON/XOFF characters
shall be used instead of Fcon/Fcoff command in advanced option mode to
handle flow control. Chapter 5.4.8.2 describes how XON/XOFF characters
shall be handled. Basic option mode only used Fcon/Fcoff commands and no
XON/XOFF characters. These are treated as data bytes here.
The current implementation uses the gsm_mux field 'constipated' to handle
flow control from the remote peer and the gsm_dlci field 'constipated' to
handle flow control from each DLCI. The later is unrelated to this patch.
The gsm_mux field is correctly set for Fcon/Fcoff commands in
gsm_control_message(). However, the same is not true for XON/XOFF
characters in gsm1_receive().
Disable software flow control handling in the tty to allow explicit
handling by n_gsm.
Add the missing handling in advanced option mode for gsm_mux in
gsm1_receive() to comply with the standard.

This patch depends on the following commit:
Commit 8838b2af23ca ("tty: n_gsm: fix SW flow control encoding/handling")

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220422071025.5490-3-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_gsm.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -232,6 +232,7 @@ struct gsm_mux {
 	int initiator;			/* Did we initiate connection */
 	bool dead;			/* Has the mux been shut down */
 	struct gsm_dlci *dlci[NUM_DLCI];
+	int old_c_iflag;		/* termios c_iflag value before attach */
 	bool constipated;		/* Asked by remote to shut up */
 
 	spinlock_t tx_lock;
@@ -1960,6 +1961,16 @@ static void gsm0_receive(struct gsm_mux
 
 static void gsm1_receive(struct gsm_mux *gsm, unsigned char c)
 {
+	/* handle XON/XOFF */
+	if ((c & ISO_IEC_646_MASK) == XON) {
+		gsm->constipated = true;
+		return;
+	} else if ((c & ISO_IEC_646_MASK) == XOFF) {
+		gsm->constipated = false;
+		/* Kick the link in case it is idling */
+		gsm_data_kick(gsm, NULL);
+		return;
+	}
 	if (c == GSM1_SOF) {
 		/* EOF is only valid in frame if we have got to the data state
 		   and received at least one byte (the FCS) */
@@ -2378,6 +2389,9 @@ static int gsmld_attach_gsm(struct tty_s
 	int ret, i;
 
 	gsm->tty = tty_kref_get(tty);
+	/* Turn off tty XON/XOFF handling to handle it explicitly. */
+	gsm->old_c_iflag = tty->termios.c_iflag;
+	tty->termios.c_iflag &= (IXON | IXOFF);
 	ret =  gsm_activate_mux(gsm);
 	if (ret != 0)
 		tty_kref_put(gsm->tty);
@@ -2418,6 +2432,8 @@ static void gsmld_detach_gsm(struct tty_
 	WARN_ON(tty != gsm->tty);
 	for (i = 1; i < NUM_DLCI; i++)
 		tty_unregister_device(gsm_tty_driver, base + i);
+	/* Restore tty XON/XOFF handling. */
+	gsm->tty->termios.c_iflag = gsm->old_c_iflag;
 	tty_kref_put(gsm->tty);
 	gsm->tty = NULL;
 }

[PATCH 5.10 129/129] perf symbol: Remove arch__symbols__fixup_end()

[Greg Kroah-Hartman]

From: Namhyung Kim <namhyung@kernel.org>

commit a5d20d42a2f2dc2b2f9e9361912062732414090d upstream.

Now the generic code can handle kallsyms fixup properly so no need to
keep the arch-functions anymore.

Fixes: 3cf6a32f3f2a4594 ("perf symbols: Fix symbol size calculation condition")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-s390@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220416004048.1514900-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/arch/arm64/util/Build     |    1 -
 tools/perf/arch/arm64/util/machine.c |   27 ---------------------------
 tools/perf/arch/s390/util/machine.c  |   16 ----------------
 tools/perf/util/symbol.c             |    5 -----
 tools/perf/util/symbol.h             |    1 -
 5 files changed, 50 deletions(-)
 delete mode 100644 tools/perf/arch/powerpc/util/machine.c

--- a/tools/perf/arch/arm64/util/Build
+++ b/tools/perf/arch/arm64/util/Build
@@ -1,5 +1,4 @@
 perf-y += header.o
-perf-y += machine.o
 perf-y += perf_regs.o
 perf-y += tsc.o
 perf-$(CONFIG_DWARF)     += dwarf-regs.o
--- a/tools/perf/arch/arm64/util/machine.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include <stdio.h>
-#include <string.h>
-#include "debug.h"
-#include "symbol.h"
-
-/* On arm64, kernel text segment start at high memory address,
- * for example 0xffff 0000 8xxx xxxx. Modules start at a low memory
- * address, like 0xffff 0000 00ax xxxx. When only samll amount of
- * memory is used by modules, gap between end of module's text segment
- * and start of kernel text segment may be reach 2G.
- * Therefore do not fill this gap and do not assign it to the kernel dso map.
- */
-
-#define SYMBOL_LIMIT (1 << 12) /* 4K */
-
-void arch__symbols__fixup_end(struct symbol *p, struct symbol *c)
-{
-	if ((strchr(p->name, '[') && strchr(c->name, '[') == NULL) ||
-			(strchr(p->name, '[') == NULL && strchr(c->name, '[')))
-		/* Limit range of last symbol in module and kernel */
-		p->end += SYMBOL_LIMIT;
-	else
-		p->end = c->start;
-	pr_debug4("%s sym:%s end:%#lx\n", __func__, p->name, p->end);
-}
--- a/tools/perf/arch/s390/util/machine.c
+++ b/tools/perf/arch/s390/util/machine.c
@@ -34,19 +34,3 @@ int arch__fix_module_text_start(u64 *sta
 
 	return 0;
 }
-
-/* On s390 kernel text segment start is located at very low memory addresses,
- * for example 0x10000. Modules are located at very high memory addresses,
- * for example 0x3ff xxxx xxxx. The gap between end of kernel text segment
- * and beginning of first module's text segment is very big.
- * Therefore do not fill this gap and do not assign it to the kernel dso map.
- */
-void arch__symbols__fixup_end(struct symbol *p, struct symbol *c)
-{
-	if (strchr(p->name, '[') == NULL && strchr(c->name, '['))
-		/* Last kernel symbol mapped to end of page */
-		p->end = roundup(p->end, page_size);
-	else
-		p->end = c->start;
-	pr_debug4("%s sym:%s end:%#lx\n", __func__, p->name, p->end);
-}
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -101,11 +101,6 @@ static int prefix_underscores_count(cons
 	return tail - str;
 }
 
-void __weak arch__symbols__fixup_end(struct symbol *p, struct symbol *c)
-{
-	p->end = c->start;
-}
-
 const char * __weak arch__normalize_symbol_name(const char *name)
 {
 	return name;
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -230,7 +230,6 @@ const char *arch__normalize_symbol_name(
 #define SYMBOL_A 0
 #define SYMBOL_B 1
 
-void arch__symbols__fixup_end(struct symbol *p, struct symbol *c);
 int arch__compare_symbol_names(const char *namea, const char *nameb);
 int arch__compare_symbol_names_n(const char *namea, const char *nameb,
 				 unsigned int n);

[PATCH 5.10 129/129] perf symbol: Remove arch__symbols__fixup_end()

[Greg Kroah-Hartman]

From: Namhyung Kim <namhyung@kernel.org>

commit a5d20d42a2f2dc2b2f9e9361912062732414090d upstream.

Now the generic code can handle kallsyms fixup properly so no need to
keep the arch-functions anymore.

Fixes: 3cf6a32f3f2a4594 ("perf symbols: Fix symbol size calculation condition")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-s390@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220416004048.1514900-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/arch/arm64/util/Build     |    1 -
 tools/perf/arch/arm64/util/machine.c |   27 ---------------------------
 tools/perf/arch/s390/util/machine.c  |   16 ----------------
 tools/perf/util/symbol.c             |    5 -----
 tools/perf/util/symbol.h             |    1 -
 5 files changed, 50 deletions(-)
 delete mode 100644 tools/perf/arch/powerpc/util/machine.c

--- a/tools/perf/arch/arm64/util/Build
+++ b/tools/perf/arch/arm64/util/Build
@@ -1,5 +1,4 @@
 perf-y += header.o
-perf-y += machine.o
 perf-y += perf_regs.o
 perf-y += tsc.o
 perf-$(CONFIG_DWARF)     += dwarf-regs.o
--- a/tools/perf/arch/arm64/util/machine.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include <stdio.h>
-#include <string.h>
-#include "debug.h"
-#include "symbol.h"
-
-/* On arm64, kernel text segment start at high memory address,
- * for example 0xffff 0000 8xxx xxxx. Modules start at a low memory
- * address, like 0xffff 0000 00ax xxxx. When only samll amount of
- * memory is used by modules, gap between end of module's text segment
- * and start of kernel text segment may be reach 2G.
- * Therefore do not fill this gap and do not assign it to the kernel dso map.
- */
-
-#define SYMBOL_LIMIT (1 << 12) /* 4K */
-
-void arch__symbols__fixup_end(struct symbol *p, struct symbol *c)
-{
-	if ((strchr(p->name, '[') && strchr(c->name, '[') == NULL) ||
-			(strchr(p->name, '[') == NULL && strchr(c->name, '[')))
-		/* Limit range of last symbol in module and kernel */
-		p->end += SYMBOL_LIMIT;
-	else
-		p->end = c->start;
-	pr_debug4("%s sym:%s end:%#lx\n", __func__, p->name, p->end);
-}
--- a/tools/perf/arch/s390/util/machine.c
+++ b/tools/perf/arch/s390/util/machine.c
@@ -34,19 +34,3 @@ int arch__fix_module_text_start(u64 *sta
 
 	return 0;
 }
-
-/* On s390 kernel text segment start is located at very low memory addresses,
- * for example 0x10000. Modules are located at very high memory addresses,
- * for example 0x3ff xxxx xxxx. The gap between end of kernel text segment
- * and beginning of first module's text segment is very big.
- * Therefore do not fill this gap and do not assign it to the kernel dso map.
- */
-void arch__symbols__fixup_end(struct symbol *p, struct symbol *c)
-{
-	if (strchr(p->name, '[') == NULL && strchr(c->name, '['))
-		/* Last kernel symbol mapped to end of page */
-		p->end = roundup(p->end, page_size);
-	else
-		p->end = c->start;
-	pr_debug4("%s sym:%s end:%#lx\n", __func__, p->name, p->end);
-}
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -101,11 +101,6 @@ static int prefix_underscores_count(cons
 	return tail - str;
 }
 
-void __weak arch__symbols__fixup_end(struct symbol *p, struct symbol *c)
-{
-	p->end = c->start;
-}
-
 const char * __weak arch__normalize_symbol_name(const char *name)
 {
 	return name;
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -230,7 +230,6 @@ const char *arch__normalize_symbol_name(
 #define SYMBOL_A 0
 #define SYMBOL_B 1
 
-void arch__symbols__fixup_end(struct symbol *p, struct symbol *c);
 int arch__compare_symbol_names(const char *namea, const char *nameb);
 int arch__compare_symbol_names_n(const char *namea, const char *nameb,
 				 unsigned int n);

Re: [PATCH 5.10 000/129] 5.10.114-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 662 bytes --]

Hi!

> This is the start of the stable review cycle for the 5.10.114 release.
> There are 129 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 5.10 000/129] 5.10.114-rc1 review

[Samuel Zou]

On 2022/5/5 0:43, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.114 release.
> There are 129 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 06 May 2022 15:25:19 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.114-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 5.10.114-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.10.y
Version: 5.10.114-rc1
Commit: 9bf02e9ae445793d3e1cdb9129d19c5efa417ddc
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9033
passed: 9033
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9033
passed: 9033
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>

Re: [PATCH 5.10 000/129] 5.10.114-rc1 review

[Florian Fainelli]

On 5/4/2022 9:43 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.114 release.
> There are 129 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 06 May 2022 15:25:19 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.114-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.10 000/129] 5.10.114-rc1 review

[Jon Hunter]

On Wed, 04 May 2022 18:43:12 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.114 release.
> There are 129 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 06 May 2022 15:25:19 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.114-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.10:
    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    75 tests:	75 pass, 0 fail

Linux version:	5.10.114-rc1-g0412f4bd3360
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 5.10 000/129] 5.10.114-rc1 review

[Naresh Kamboju]

On Wed, 4 May 2022 at 22:19, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.10.114 release.
> There are 129 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 06 May 2022 15:25:19 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.114-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.10.114-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.10.y
* git commit: 0412f4bd3360abe0f87f814f6b1325813bbe9f44
* git describe: v5.10.113-130-g0412f4bd3360
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.113-130-g0412f4bd3360

## Test Regressions (compared to v5.10.113-3-gbc311a966773)
No test regressions found.

## Metric Regressions (compared to v5.10.113-3-gbc311a966773)
No metric regressions found.

## Test Fixes (compared to v5.10.113-3-gbc311a966773)
No test fixes found.

## Metric Fixes (compared to v5.10.113-3-gbc311a966773)
No metric fixes found.

## Test result summary
total: 100855, pass: 85629, fail: 641, skip: 13505, xfail: 1080

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 291 total, 291 passed, 0 failed
* arm64: 41 total, 41 passed, 0 failed
* i386: 39 total, 39 passed, 0 failed
* mips: 37 total, 37 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 60 total, 51 passed, 9 failed
* riscv: 27 total, 27 passed, 0 failed
* s390: 21 total, 21 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 41 total, 41 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* ssuite
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.10 000/129] 5.10.114-rc1 review

[Guenter Roeck]

On Wed, May 04, 2022 at 06:43:12PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.114 release.
> There are 129 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 06 May 2022 15:25:19 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 161 pass: 161 fail: 0
Qemu test results:
	total: 477 pass: 477 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter