[PATCH 5.10 00/84] 5.10.124-rc1 review

[PATCH 5.10 00/84] 5.10.124-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.10.124 release.
There are 84 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 22 Jun 2022 12:47:02 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.124-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.10.124-rc1

Peng Fan <peng.fan@nxp.com>
    clk: imx8mp: fix usb_root_clk parent

Masahiro Yamada <masahiroy@kernel.org>
    powerpc/book3e: get rid of #include <generated/compile.h>

Vinicius Costa Gomes <vinicius.gomes@intel.com>
    igc: Enable PCIe PTM

Vinicius Costa Gomes <vinicius.gomes@intel.com>
    Revert "PCI: Make pci_enable_ptm() private"

Ilya Maximets <i.maximets@ovn.org>
    net: openvswitch: fix misuse of the cached connection on tuple changes

Davide Caratti <dcaratti@redhat.com>
    net/sched: act_police: more accurate MTU policing

Robin Murphy <robin.murphy@arm.com>
    dma-direct: don't over-decrypt memory

Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
    virtio-pci: Remove wrong address verification in vp_del_vqs()

Andy Chi <andy.chi@canonical.com>
    ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machine

Ashish Kalra <ashish.kalra@amd.com>
    KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak

Sean Christopherson <seanjc@google.com>
    KVM: x86: Account a variety of miscellaneous allocations

Marc Zyngier <maz@kernel.org>
    KVM: arm64: Don't read a HW interrupt pending state in user context

Zhang Yi <yi.zhang@huawei.com>
    ext4: add reserved GDT blocks check

Ding Xiang <dingxiang@cmss.chinamobile.com>
    ext4: make variable "count" signed

Baokun Li <libaokun1@huawei.com>
    ext4: fix bug_on ext4_mb_use_inode_pa

Roman Li <roman.li@amd.com>
    drm/amd/display: Cap OLED brightness per max frame-average luminance

Mikulas Patocka <mpatocka@redhat.com>
    dm mirror log: round up region bitmap size to BITS_PER_LONG

Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    serial: 8250: Store to lsr_save_flags after lsr read

Miaoqian Lin <linmq006@gmail.com>
    usb: gadget: lpc32xx_udc: Fix refcount leak in lpc32xx_udc_probe

Miaoqian Lin <linmq006@gmail.com>
    usb: dwc2: Fix memory leak in dwc2_hcd_init

Robert Eckelmann <longnoserob@gmail.com>
    USB: serial: io_ti: add Agilent E5805A support

Slark Xiao <slark_xiao@163.com>
    USB: serial: option: add support for Cinterion MV31 with new baseline

Jason A. Donenfeld <Jason@zx2c4.com>
    crypto: memneq - move into lib/

Ian Abbott <abbotti@mev.co.uk>
    comedi: vmk80xx: fix expression for tx buffer size

Alexander Usyskin <alexander.usyskin@intel.com>
    mei: me: add raptor lake point S DID

Serge Semin <Sergey.Semin@baikalelectronics.ru>
    i2c: designware: Use standard optional ref clock implementation

Miaoqian Lin <linmq006@gmail.com>
    irqchip/gic-v3: Fix refcount leak in gic_populate_ppi_partitions

Miaoqian Lin <linmq006@gmail.com>
    irqchip/gic-v3: Fix error handling in gic_populate_ppi_partitions

Miaoqian Lin <linmq006@gmail.com>
    irqchip/gic/realview: Fix refcount leak in realview_gic_of_init

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    i2c: npcm7xx: Add check for platform_driver_register

Josh Poimboeuf <jpoimboe@kernel.org>
    faddr2line: Fix overlapping text section failures, the sequel

Bart Van Assche <bvanassche@acm.org>
    block: Fix handling of offline queues in blk_mq_alloc_request_hctx()

Masahiro Yamada <masahiroy@kernel.org>
    certs/blacklist_hashes.c: fix const confusion in certs blacklist

Mark Rutland <mark.rutland@arm.com>
    arm64: ftrace: consistently handle PLTs.

Mark Rutland <mark.rutland@arm.com>
    arm64: ftrace: fix branch range checks

Duoming Zhou <duoming@zju.edu.cn>
    net: ax25: Fix deadlock caused by skb_recv_datagram in ax25_recvmsg

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    net: bgmac: Fix an erroneous kfree() in bgmac_remove()

Petr Machata <petrm@nvidia.com>
    mlxsw: spectrum_cnt: Reorder counter pools

Thomas Weißschuh <linux@weissschuh.net>
    nvme: add device name to warning in uuid_show()

Daniel Wagner <dwagner@suse.de>
    nvme: use sysfs_emit instead of sprintf

Alan Previn <alan.previn.teres.alexis@intel.com>
    drm/i915/reset: Fix error_state_read ptr + offset use

Miaoqian Lin <linmq006@gmail.com>
    misc: atmel-ssc: Fix IRQ check in ssc_probe

Vincent Whitchurch <vincent.whitchurch@axis.com>
    tty: goldfish: Fix free_irq() on remove

Saurabh Sengar <ssengar@linux.microsoft.com>
    Drivers: hv: vmbus: Release cpu lock in error case

Aleksandr Loktionov <aleksandr.loktionov@intel.com>
    i40e: Fix call trace in setup_tx_descriptors

Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
    i40e: Fix calculating the number of queue pairs

Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
    i40e: Fix adding ADQ filter to TC0

Masahiro Yamada <masahiroy@kernel.org>
    clocksource: hyper-v: unexport __init-annotated hv_init_clocksource()

Trond Myklebust <trond.myklebust@hammerspace.com>
    pNFS: Avoid a live lock condition in pnfs_update_layout()

Trond Myklebust <trond.myklebust@hammerspace.com>
    pNFS: Don't keep retrying if the server replied NFS4ERR_LAYOUTUNAVAILABLE

Jason A. Donenfeld <Jason@zx2c4.com>
    random: credit cpu and bootloader seeds by default

Serge Semin <Sergey.Semin@baikalelectronics.ru>
    gpio: dwapb: Don't print error on -EPROBE_DEFER

Yupeng Li <liyupeng@zbhlos.com>
    MIPS: Loongson-3: fix compile mips cpu_hwmon as module build error.

Linus Torvalds <torvalds@linux-foundation.org>
    netfs: gcc-12: temporarily disable '-Wattribute-warning' for now

Linus Torvalds <torvalds@linux-foundation.org>
    mellanox: mlx5: avoid uninitialized variable warning with gcc-12

Chen Lin <chen45464546@163.com>
    net: ethernet: mtk_eth_soc: fix misuse of mem alloc interface netdev[napi]_alloc_frag

Wang Yufen <wangyufen@huawei.com>
    ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg

Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>
    nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred

chengkaitao <pilgrimtao@gmail.com>
    virtio-mmio: fix missing put_device() when vm_cmdline_parent registration failed

huangwenhui <huangwenhuia@uniontech.com>
    ALSA: hda/realtek - Add HW8326 support

Chengguang Xu <cgxu519@mykernel.net>
    scsi: pmcraid: Fix missing resource cleanup in error case

Chengguang Xu <cgxu519@mykernel.net>
    scsi: ipr: Fix missing/incorrect resource cleanup in error case

James Smart <jsmart2021@gmail.com>
    scsi: lpfc: Allow reduced polling rate for nvme_admin_async_event cmd completion

James Smart <jsmart2021@gmail.com>
    scsi: lpfc: Fix port stuck in bypassed state after LIP in PT2PT topology

Wentao Wang <wwentao@vmware.com>
    scsi: vmw_pvscsi: Expand vcpuHint to 16 bits

Marius Hoch <mail@mariushoch.de>
    Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to dmi_use_low_level_irq

Mark Brown <broonie@kernel.org>
    ASoC: wm_adsp: Fix event generation for wm_adsp_fw_put()

Mark Brown <broonie@kernel.org>
    ASoC: es8328: Fix event generation for deemphasis control

Adam Ford <aford173@gmail.com>
    ASoC: wm8962: Fix suspend while playing music

Matthew Wilcox (Oracle) <willy@infradead.org>
    quota: Prevent memory allocation recursion while holding dq_lock

Sergey Shtylyov <s.shtylyov@omp.ru>
    ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo()

Charles Keepax <ckeepax@opensource.cirrus.com>
    ASoC: cs42l51: Correct minimum value for SX volume control

Charles Keepax <ckeepax@opensource.cirrus.com>
    ASoC: cs42l56: Correct typo in minimum level for SX volume controls

Charles Keepax <ckeepax@opensource.cirrus.com>
    ASoC: cs42l52: Correct TLV for Bypass Volume

Charles Keepax <ckeepax@opensource.cirrus.com>
    ASoC: cs53l30: Correct number of volume levels on SX controls

Charles Keepax <ckeepax@opensource.cirrus.com>
    ASoC: cs35l36: Update digital volume TLV

Charles Keepax <ckeepax@opensource.cirrus.com>
    ASoC: cs42l52: Fix TLV scales for mixer controls

Rob Clark <robdclark@chromium.org>
    dma-debug: make things less spammy under memory pressure

Hui Wang <hui.wang@canonical.com>
    ASoC: nau8822: Add operation for internal PLL off and on

He Ying <heying24@huawei.com>
    powerpc/kasan: Silence KASAN warnings in __get_wchan()

Adam Ford <aford173@gmail.com>
    arm64: dts: imx8mm-beacon: Enable RTS-CTS on UART3

Yuntao Wang <ytcoode@gmail.com>
    bpf: Fix incorrect memory charge cost calculation in stack_map_alloc()

Trond Myklebust <trond.myklebust@hammerspace.com>
    nfsd: Replace use of rwsem with errseq_t

Al Viro <viro@zeniv.linux.org.uk>
    9p: missing chunk of "fs/9p: Don't update file type when updating file attributes"


-------------

Diffstat:

 Makefile                                           |   4 +-
 .../dts/freescale/imx8mm-beacon-baseboard.dtsi     |   3 +
 arch/arm64/kernel/ftrace.c                         | 137 ++++++++++-----------
 arch/arm64/kvm/vgic/vgic-mmio-v2.c                 |   4 +-
 arch/arm64/kvm/vgic/vgic-mmio.c                    |  19 ++-
 arch/arm64/kvm/vgic/vgic-mmio.h                    |   3 +
 arch/powerpc/kernel/process.c                      |   4 +-
 arch/powerpc/mm/nohash/kaslr_booke.c               |   8 +-
 arch/x86/kvm/svm/nested.c                          |   4 +-
 arch/x86/kvm/svm/sev.c                             |   4 +-
 arch/x86/kvm/vmx/vmx.c                             |   2 +-
 block/blk-mq.c                                     |   2 +
 certs/blacklist_hashes.c                           |   2 +-
 crypto/Kconfig                                     |   1 +
 crypto/Makefile                                    |   2 +-
 drivers/ata/libata-core.c                          |   4 +-
 drivers/char/Kconfig                               |  54 ++++----
 drivers/clk/imx/clk-imx8mp.c                       |   2 +-
 drivers/clocksource/hyperv_timer.c                 |   1 -
 drivers/gpio/gpio-dwapb.c                          |   7 +-
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  |   8 +-
 drivers/gpu/drm/i915/i915_sysfs.c                  |  15 ++-
 drivers/hv/channel_mgmt.c                          |   1 +
 drivers/i2c/busses/i2c-designware-common.c         |   3 -
 drivers/i2c/busses/i2c-designware-platdrv.c        |  13 +-
 drivers/i2c/busses/i2c-npcm7xx.c                   |   3 +-
 drivers/input/misc/soc_button_array.c              |   4 +-
 drivers/irqchip/irq-gic-realview.c                 |   1 +
 drivers/irqchip/irq-gic-v3.c                       |   7 +-
 drivers/md/dm-log.c                                |   3 +-
 drivers/misc/atmel-ssc.c                           |   4 +-
 drivers/misc/mei/hw-me-regs.h                      |   2 +
 drivers/misc/mei/pci-me.c                          |   2 +
 drivers/net/ethernet/broadcom/bgmac-bcma.c         |   1 -
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c     |  25 ++--
 drivers/net/ethernet/intel/i40e/i40e_main.c        |   5 +
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c |   2 +-
 drivers/net/ethernet/intel/igc/igc_main.c          |   5 +
 drivers/net/ethernet/mediatek/mtk_eth_soc.c        |  21 +++-
 drivers/net/ethernet/mellanox/mlx5/core/lag.c      |   2 +-
 drivers/net/ethernet/mellanox/mlxsw/spectrum_cnt.h |   2 +-
 drivers/nfc/nfcmrvl/usb.c                          |  16 ++-
 drivers/nvme/host/core.c                           |  44 +++----
 drivers/nvme/host/multipath.c                      |   8 +-
 drivers/pci/pci.h                                  |   3 -
 drivers/platform/mips/Kconfig                      |   2 +-
 drivers/scsi/ipr.c                                 |   4 +-
 drivers/scsi/lpfc/lpfc_hw4.h                       |   3 +
 drivers/scsi/lpfc/lpfc_nportdisc.c                 |   3 +-
 drivers/scsi/lpfc/lpfc_nvme.c                      |  11 +-
 drivers/scsi/pmcraid.c                             |   2 +-
 drivers/scsi/vmw_pvscsi.h                          |   4 +-
 drivers/staging/comedi/drivers/vmk80xx.c           |   2 +-
 drivers/tty/goldfish.c                             |   2 +-
 drivers/tty/serial/8250/8250_port.c                |   2 +
 drivers/usb/dwc2/hcd.c                             |   2 +-
 drivers/usb/gadget/udc/lpc32xx_udc.c               |   1 +
 drivers/usb/serial/io_ti.c                         |   2 +
 drivers/usb/serial/io_usbvend.h                    |   1 +
 drivers/usb/serial/option.c                        |   6 +
 drivers/virtio/virtio_mmio.c                       |   1 +
 drivers/virtio/virtio_pci_common.c                 |   3 +-
 fs/9p/vfs_inode_dotl.c                             |  10 +-
 fs/afs/inode.c                                     |   3 +
 fs/ceph/inode.c                                    |   3 +
 fs/ext4/mballoc.c                                  |   9 ++
 fs/ext4/namei.c                                    |   3 +-
 fs/ext4/resize.c                                   |  10 ++
 fs/nfs/callback_proc.c                             |   1 +
 fs/nfs/pnfs.c                                      |  21 +++-
 fs/nfs/pnfs.h                                      |   1 +
 fs/nfsd/filecache.c                                |   1 -
 fs/nfsd/filecache.h                                |   1 -
 fs/nfsd/nfs4proc.c                                 |   7 +-
 fs/nfsd/vfs.c                                      |  40 +++---
 fs/quota/dquot.c                                   |  10 ++
 include/linux/pci.h                                |   7 ++
 kernel/bpf/stackmap.c                              |   3 +-
 kernel/dma/debug.c                                 |   2 +-
 kernel/dma/direct.c                                |  16 +--
 lib/Kconfig                                        |   3 +
 lib/Makefile                                       |   1 +
 lib/crypto/Kconfig                                 |   1 +
 {crypto => lib}/memneq.c                           |   0
 net/ax25/af_ax25.c                                 |  34 ++++-
 net/l2tp/l2tp_ip6.c                                |   5 +-
 net/openvswitch/actions.c                          |   6 +
 net/openvswitch/conntrack.c                        |   3 +-
 net/sched/act_police.c                             |  16 ++-
 scripts/faddr2line                                 |  45 +++++--
 sound/hda/hdac_device.c                            |   1 +
 sound/pci/hda/patch_realtek.c                      |  15 +++
 sound/soc/codecs/cs35l36.c                         |   3 +-
 sound/soc/codecs/cs42l51.c                         |   2 +-
 sound/soc/codecs/cs42l52.c                         |   8 +-
 sound/soc/codecs/cs42l56.c                         |   4 +-
 sound/soc/codecs/cs53l30.c                         |  16 +--
 sound/soc/codecs/es8328.c                          |   5 +-
 sound/soc/codecs/nau8822.c                         |   4 +
 sound/soc/codecs/nau8822.h                         |   3 +
 sound/soc/codecs/wm8962.c                          |   1 +
 sound/soc/codecs/wm_adsp.c                         |   2 +-
 .../testing/selftests/net/forwarding/tc_police.sh  |  52 ++++++++
 103 files changed, 599 insertions(+), 297 deletions(-)

[PATCH 5.10 01/84] 9p: missing chunk of "fs/9p: Dont update file type when updating file attributes"

[Greg Kroah-Hartman]

From: Al Viro <viro@zeniv.linux.org.uk>

commit b577d0cd2104fdfcf0ded3707540a12be8ddd8b0 upstream.

In commit 45089142b149 Aneesh had missed one (admittedly, very unlikely
to hit) case in v9fs_stat2inode_dotl().  However, the same considerations
apply there as well - we have no business whatsoever to change ->i_rdev
or the file type.

Cc: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/9p/vfs_inode_dotl.c |   10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

--- a/fs/9p/vfs_inode_dotl.c
+++ b/fs/9p/vfs_inode_dotl.c
@@ -657,14 +657,10 @@ v9fs_stat2inode_dotl(struct p9_stat_dotl
 		if (stat->st_result_mask & P9_STATS_NLINK)
 			set_nlink(inode, stat->st_nlink);
 		if (stat->st_result_mask & P9_STATS_MODE) {
-			inode->i_mode = stat->st_mode;
-			if ((S_ISBLK(inode->i_mode)) ||
-						(S_ISCHR(inode->i_mode)))
-				init_special_inode(inode, inode->i_mode,
-								inode->i_rdev);
+			mode = stat->st_mode & S_IALLUGO;
+			mode |= inode->i_mode & ~S_IALLUGO;
+			inode->i_mode = mode;
 		}
-		if (stat->st_result_mask & P9_STATS_RDEV)
-			inode->i_rdev = new_decode_dev(stat->st_rdev);
 		if (!(flags & V9FS_STAT2INODE_KEEP_ISIZE) &&
 		    stat->st_result_mask & P9_STATS_SIZE)
 			v9fs_i_size_write(inode, stat->st_size);

[PATCH 5.10 02/84] nfsd: Replace use of rwsem with errseq_t

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

commit 555dbf1a9aac6d3150c8b52fa35f768a692f4eeb upstream.

The nfsd_file nf_rwsem is currently being used to separate file write
and commit instances to ensure that we catch errors and apply them to
the correct write/commit.
We can improve scalability at the expense of a little accuracy (some
extra false positives) by replacing the nf_rwsem with more careful
use of the errseq_t mechanism to track errors across the different
operations.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[ cel: rebased on zero-verifier fix ]
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfsd/filecache.c |    1 -
 fs/nfsd/filecache.h |    1 -
 fs/nfsd/nfs4proc.c  |    7 ++++---
 fs/nfsd/vfs.c       |   40 +++++++++++++++-------------------------
 4 files changed, 19 insertions(+), 30 deletions(-)

--- a/fs/nfsd/filecache.c
+++ b/fs/nfsd/filecache.c
@@ -194,7 +194,6 @@ nfsd_file_alloc(struct inode *inode, uns
 				__set_bit(NFSD_FILE_BREAK_READ, &nf->nf_flags);
 		}
 		nf->nf_mark = NULL;
-		init_rwsem(&nf->nf_rwsem);
 		trace_nfsd_file_alloc(nf);
 	}
 	return nf;
--- a/fs/nfsd/filecache.h
+++ b/fs/nfsd/filecache.h
@@ -46,7 +46,6 @@ struct nfsd_file {
 	refcount_t		nf_ref;
 	unsigned char		nf_may;
 	struct nfsd_file_mark	*nf_mark;
-	struct rw_semaphore	nf_rwsem;
 };
 
 int nfsd_file_cache_init(void);
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -1380,6 +1380,8 @@ static void nfsd4_init_copy_res(struct n
 
 static ssize_t _nfsd_copy_file_range(struct nfsd4_copy *copy)
 {
+	struct file *dst = copy->nf_dst->nf_file;
+	struct file *src = copy->nf_src->nf_file;
 	ssize_t bytes_copied = 0;
 	size_t bytes_total = copy->cp_count;
 	u64 src_pos = copy->cp_src_pos;
@@ -1388,9 +1390,8 @@ static ssize_t _nfsd_copy_file_range(str
 	do {
 		if (kthread_should_stop())
 			break;
-		bytes_copied = nfsd_copy_file_range(copy->nf_src->nf_file,
-				src_pos, copy->nf_dst->nf_file, dst_pos,
-				bytes_total);
+		bytes_copied = nfsd_copy_file_range(src, src_pos, dst, dst_pos,
+						    bytes_total);
 		if (bytes_copied <= 0)
 			break;
 		bytes_total -= bytes_copied;
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -535,10 +535,11 @@ __be32 nfsd4_clone_file_range(struct nfs
 {
 	struct file *src = nf_src->nf_file;
 	struct file *dst = nf_dst->nf_file;
+	errseq_t since;
 	loff_t cloned;
 	__be32 ret = 0;
 
-	down_write(&nf_dst->nf_rwsem);
+	since = READ_ONCE(dst->f_wb_err);
 	cloned = vfs_clone_file_range(src, src_pos, dst, dst_pos, count, 0);
 	if (cloned < 0) {
 		ret = nfserrno(cloned);
@@ -553,6 +554,8 @@ __be32 nfsd4_clone_file_range(struct nfs
 		int status = vfs_fsync_range(dst, dst_pos, dst_end, 0);
 
 		if (!status)
+			status = filemap_check_wb_err(dst->f_mapping, since);
+		if (!status)
 			status = commit_inode_metadata(file_inode(src));
 		if (status < 0) {
 			nfsd_reset_boot_verifier(net_generic(nf_dst->nf_net,
@@ -561,7 +564,6 @@ __be32 nfsd4_clone_file_range(struct nfs
 		}
 	}
 out_err:
-	up_write(&nf_dst->nf_rwsem);
 	return ret;
 }
 
@@ -980,6 +982,7 @@ nfsd_vfs_write(struct svc_rqst *rqstp, s
 	struct file		*file = nf->nf_file;
 	struct svc_export	*exp;
 	struct iov_iter		iter;
+	errseq_t		since;
 	__be32			nfserr;
 	int			host_err;
 	int			use_wgather;
@@ -1009,21 +1012,18 @@ nfsd_vfs_write(struct svc_rqst *rqstp, s
 		flags |= RWF_SYNC;
 
 	iov_iter_kvec(&iter, WRITE, vec, vlen, *cnt);
+	since = READ_ONCE(file->f_wb_err);
 	if (flags & RWF_SYNC) {
-		down_write(&nf->nf_rwsem);
 		host_err = vfs_iter_write(file, &iter, &pos, flags);
 		if (host_err < 0)
 			nfsd_reset_boot_verifier(net_generic(SVC_NET(rqstp),
 						 nfsd_net_id));
-		up_write(&nf->nf_rwsem);
 	} else {
-		down_read(&nf->nf_rwsem);
 		if (verf)
 			nfsd_copy_boot_verifier(verf,
 					net_generic(SVC_NET(rqstp),
 					nfsd_net_id));
 		host_err = vfs_iter_write(file, &iter, &pos, flags);
-		up_read(&nf->nf_rwsem);
 	}
 	if (host_err < 0) {
 		nfsd_reset_boot_verifier(net_generic(SVC_NET(rqstp),
@@ -1033,6 +1033,9 @@ nfsd_vfs_write(struct svc_rqst *rqstp, s
 	*cnt = host_err;
 	nfsdstats.io_write += *cnt;
 	fsnotify_modify(file);
+	host_err = filemap_check_wb_err(file->f_mapping, since);
+	if (host_err < 0)
+		goto out_nfserr;
 
 	if (stable && use_wgather) {
 		host_err = wait_for_concurrent_writes(file);
@@ -1113,19 +1116,6 @@ out:
 }
 
 #ifdef CONFIG_NFSD_V3
-static int
-nfsd_filemap_write_and_wait_range(struct nfsd_file *nf, loff_t offset,
-				  loff_t end)
-{
-	struct address_space *mapping = nf->nf_file->f_mapping;
-	int ret = filemap_fdatawrite_range(mapping, offset, end);
-
-	if (ret)
-		return ret;
-	filemap_fdatawait_range_keep_errors(mapping, offset, end);
-	return 0;
-}
-
 /*
  * Commit all pending writes to stable storage.
  *
@@ -1156,25 +1146,25 @@ nfsd_commit(struct svc_rqst *rqstp, stru
 	if (err)
 		goto out;
 	if (EX_ISSYNC(fhp->fh_export)) {
-		int err2 = nfsd_filemap_write_and_wait_range(nf, offset, end);
+		errseq_t since = READ_ONCE(nf->nf_file->f_wb_err);
+		int err2;
 
-		down_write(&nf->nf_rwsem);
-		if (!err2)
-			err2 = vfs_fsync_range(nf->nf_file, offset, end, 0);
+		err2 = vfs_fsync_range(nf->nf_file, offset, end, 0);
 		switch (err2) {
 		case 0:
 			nfsd_copy_boot_verifier(verf, net_generic(nf->nf_net,
 						nfsd_net_id));
+			err2 = filemap_check_wb_err(nf->nf_file->f_mapping,
+						    since);
 			break;
 		case -EINVAL:
 			err = nfserr_notsupp;
 			break;
 		default:
-			err = nfserrno(err2);
 			nfsd_reset_boot_verifier(net_generic(nf->nf_net,
 						 nfsd_net_id));
 		}
-		up_write(&nf->nf_rwsem);
+		err = nfserrno(err2);
 	} else
 		nfsd_copy_boot_verifier(verf, net_generic(nf->nf_net,
 					nfsd_net_id));

[PATCH 5.10 03/84] bpf: Fix incorrect memory charge cost calculation in stack_map_alloc()

[Greg Kroah-Hartman]

From: Yuntao Wang <ytcoode@gmail.com>

commit b45043192b3e481304062938a6561da2ceea46a6 upstream.

This is a backport of the original upstream patch for 5.4/5.10.

The original upstream patch has been applied to 5.4/5.10 branches, which
simply removed the line:

  cost += n_buckets * (value_size + sizeof(struct stack_map_bucket));

This is correct for upstream branch but incorrect for 5.4/5.10 branches,
as the 5.4/5.10 branches do not have the commit 370868107bf6 ("bpf:
Eliminate rlimit-based memory accounting for stackmap maps"), so the
bpf_map_charge_init() function has not been removed.

Currently the bpf_map_charge_init() function in 5.4/5.10 branches takes a
wrong memory charge cost, the

  attr->max_entries * (sizeof(struct stack_map_bucket) + (u64)value_size))

part is missing, let's fix it.

Cc: <stable@vger.kernel.org> # 5.4.y
Cc: <stable@vger.kernel.org> # 5.10.y
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/bpf/stackmap.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/kernel/bpf/stackmap.c
+++ b/kernel/bpf/stackmap.c
@@ -121,7 +121,8 @@ static struct bpf_map *stack_map_alloc(u
 		return ERR_PTR(-E2BIG);
 
 	cost = n_buckets * sizeof(struct stack_map_bucket *) + sizeof(*smap);
-	err = bpf_map_charge_init(&mem, cost);
+	err = bpf_map_charge_init(&mem, cost + attr->max_entries *
+			   (sizeof(struct stack_map_bucket) + (u64)value_size));
 	if (err)
 		return ERR_PTR(err);
 

[PATCH 5.10 04/84] arm64: dts: imx8mm-beacon: Enable RTS-CTS on UART3

[Greg Kroah-Hartman]

From: Adam Ford <aford173@gmail.com>

commit 4ce01ce36d77137cf60776b320babed89de6bd4c upstream.

There is a header for a DB9 serial port, but any attempts to use
hardware handshaking fail.  Enable RTS and CTS pin muxing and enable
handshaking in the uart node.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi |    3 +++
 1 file changed, 3 insertions(+)

--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -167,6 +167,7 @@
 	pinctrl-0 = <&pinctrl_uart3>;
 	assigned-clocks = <&clk IMX8MM_CLK_UART3>;
 	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -237,6 +238,8 @@
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX	0x40
 			MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX	0x40
+			MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x40
+			MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B	0x40
 		>;
 	};
 

[PATCH 5.10 05/84] powerpc/kasan: Silence KASAN warnings in __get_wchan()

[Greg Kroah-Hartman]

From: He Ying <heying24@huawei.com>

[ Upstream commit a1b29ba2f2c171b9bea73be993bfdf0a62d37d15 ]

The following KASAN warning was reported in our kernel.

  BUG: KASAN: stack-out-of-bounds in get_wchan+0x188/0x250
  Read of size 4 at addr d216f958 by task ps/14437

  CPU: 3 PID: 14437 Comm: ps Tainted: G           O      5.10.0 #1
  Call Trace:
  [daa63858] [c0654348] dump_stack+0x9c/0xe4 (unreliable)
  [daa63888] [c035cf0c] print_address_description.constprop.3+0x8c/0x570
  [daa63908] [c035d6bc] kasan_report+0x1ac/0x218
  [daa63948] [c00496e8] get_wchan+0x188/0x250
  [daa63978] [c0461ec8] do_task_stat+0xce8/0xe60
  [daa63b98] [c0455ac8] proc_single_show+0x98/0x170
  [daa63bc8] [c03cab8c] seq_read_iter+0x1ec/0x900
  [daa63c38] [c03cb47c] seq_read+0x1dc/0x290
  [daa63d68] [c037fc94] vfs_read+0x164/0x510
  [daa63ea8] [c03808e4] ksys_read+0x144/0x1d0
  [daa63f38] [c005b1dc] ret_from_syscall+0x0/0x38
  --- interrupt: c00 at 0x8fa8f4
      LR = 0x8fa8cc

  The buggy address belongs to the page:
  page:98ebcdd2 refcount:0 mapcount:0 mapping:00000000 index:0x2 pfn:0x1216f
  flags: 0x0()
  raw: 00000000 00000000 01010122 00000000 00000002 00000000 ffffffff 00000000
  raw: 00000000
  page dumped because: kasan: bad access detected

  Memory state around the buggy address:
   d216f800: 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 00 00 00
   d216f880: f2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  >d216f900: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00
                                            ^
   d216f980: f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 00 00
   d216fa00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

After looking into this issue, I find the buggy address belongs
to the task stack region. It seems KASAN has something wrong.
I look into the code of __get_wchan in x86 architecture and
find the same issue has been resolved by the commit
f7d27c35ddff ("x86/mm, kasan: Silence KASAN warnings in get_wchan()").
The solution could be applied to powerpc architecture too.

As Andrey Ryabinin said, get_wchan() is racy by design, it may
access volatile stack of running task, thus it may access
redzone in a stack frame and cause KASAN to warn about this.

Use READ_ONCE_NOCHECK() to silence these warnings.

Reported-by: Wanming Hu <huwanming@huaweil.com>
Signed-off-by: He Ying <heying24@huawei.com>
Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220121014418.155675-1-heying24@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/process.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 3064694afea1..cfb8fd76afb4 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -2108,12 +2108,12 @@ static unsigned long __get_wchan(struct task_struct *p)
 		return 0;
 
 	do {
-		sp = *(unsigned long *)sp;
+		sp = READ_ONCE_NOCHECK(*(unsigned long *)sp);
 		if (!validate_sp(sp, p, STACK_FRAME_OVERHEAD) ||
 		    p->state == TASK_RUNNING)
 			return 0;
 		if (count > 0) {
-			ip = ((unsigned long *)sp)[STACK_FRAME_LR_SAVE];
+			ip = READ_ONCE_NOCHECK(((unsigned long *)sp)[STACK_FRAME_LR_SAVE]);
 			if (!in_sched_functions(ip))
 				return ip;
 		}
-- 
2.35.1

[PATCH 5.10 06/84] ASoC: nau8822: Add operation for internal PLL off and on

[Greg Kroah-Hartman]

From: Hui Wang <hui.wang@canonical.com>

[ Upstream commit aeca8a3295022bcec46697f16e098140423d8463 ]

We tried to enable the audio on an imx6sx EVB with the codec nau8822,
after setting the internal PLL fractional parameters, the audio still
couldn't work and the there was no sdma irq at all.

After checking with the section "8.1.1 Phase Locked Loop (PLL) Design
Example" of "NAU88C22 Datasheet Rev 0.6", we found we need to
turn off the PLL before programming fractional parameters and turn on
the PLL after programming.

After this change, the audio driver could record and play sound and
the sdma's irq is triggered when playing or recording.

Cc: David Lin <ctlin0@nuvoton.com>
Cc: John Hsu <kchsu0@nuvoton.com>
Cc: Seven Li <wtli@nuvoton.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220530040151.95221-2-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/nau8822.c | 4 ++++
 sound/soc/codecs/nau8822.h | 3 +++
 2 files changed, 7 insertions(+)

diff --git a/sound/soc/codecs/nau8822.c b/sound/soc/codecs/nau8822.c
index 609aeeb27818..d831959d8ff7 100644
--- a/sound/soc/codecs/nau8822.c
+++ b/sound/soc/codecs/nau8822.c
@@ -740,6 +740,8 @@ static int nau8822_set_pll(struct snd_soc_dai *dai, int pll_id, int source,
 		pll_param->pll_int, pll_param->pll_frac,
 		pll_param->mclk_scaler, pll_param->pre_factor);
 
+	snd_soc_component_update_bits(component,
+		NAU8822_REG_POWER_MANAGEMENT_1, NAU8822_PLL_EN_MASK, NAU8822_PLL_OFF);
 	snd_soc_component_update_bits(component,
 		NAU8822_REG_PLL_N, NAU8822_PLLMCLK_DIV2 | NAU8822_PLLN_MASK,
 		(pll_param->pre_factor ? NAU8822_PLLMCLK_DIV2 : 0) |
@@ -757,6 +759,8 @@ static int nau8822_set_pll(struct snd_soc_dai *dai, int pll_id, int source,
 		pll_param->mclk_scaler << NAU8822_MCLKSEL_SFT);
 	snd_soc_component_update_bits(component,
 		NAU8822_REG_CLOCKING, NAU8822_CLKM_MASK, NAU8822_CLKM_PLL);
+	snd_soc_component_update_bits(component,
+		NAU8822_REG_POWER_MANAGEMENT_1, NAU8822_PLL_EN_MASK, NAU8822_PLL_ON);
 
 	return 0;
 }
diff --git a/sound/soc/codecs/nau8822.h b/sound/soc/codecs/nau8822.h
index 489191ff187e..b45d42c15de6 100644
--- a/sound/soc/codecs/nau8822.h
+++ b/sound/soc/codecs/nau8822.h
@@ -90,6 +90,9 @@
 #define NAU8822_REFIMP_3K			0x3
 #define NAU8822_IOBUF_EN			(0x1 << 2)
 #define NAU8822_ABIAS_EN			(0x1 << 3)
+#define NAU8822_PLL_EN_MASK			(0x1 << 5)
+#define NAU8822_PLL_ON				(0x1 << 5)
+#define NAU8822_PLL_OFF				(0x0 << 5)
 
 /* NAU8822_REG_AUDIO_INTERFACE (0x4) */
 #define NAU8822_AIFMT_MASK			(0x3 << 3)
-- 
2.35.1

[PATCH 5.10 07/84] dma-debug: make things less spammy under memory pressure

[Greg Kroah-Hartman]

From: Rob Clark <robdclark@chromium.org>

[ Upstream commit e19f8fa6ce1ca9b8b934ba7d2e8f34c95abc6e60 ]

Limit the error msg to avoid flooding the console.  If you have a lot of
threads hitting this at once, they could have already gotten passed the
dma_debug_disabled() check before they get to the point of allocation
failure, resulting in quite a lot of this error message spamming the
log.  Use pr_err_once() to limit that.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/dma/debug.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/dma/debug.c b/kernel/dma/debug.c
index ee7da1f2462f..ae9fc1ee6d20 100644
--- a/kernel/dma/debug.c
+++ b/kernel/dma/debug.c
@@ -564,7 +564,7 @@ static void add_dma_entry(struct dma_debug_entry *entry)
 
 	rc = active_cacheline_insert(entry);
 	if (rc == -ENOMEM) {
-		pr_err("cacheline tracking ENOMEM, dma-debug disabled\n");
+		pr_err_once("cacheline tracking ENOMEM, dma-debug disabled\n");
 		global_disable = true;
 	}
 
-- 
2.35.1

[PATCH 5.10 08/84] ASoC: cs42l52: Fix TLV scales for mixer controls

[Greg Kroah-Hartman]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit 8bf5aabf524eec61013e506f764a0b2652dc5665 ]

The datasheet specifies the range of the mixer volumes as between
-51.5dB and 12dB with a 0.5dB step. Update the TLVs for this.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs42l52.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c
index f772628f233e..750e6c923512 100644
--- a/sound/soc/codecs/cs42l52.c
+++ b/sound/soc/codecs/cs42l52.c
@@ -137,7 +137,7 @@ static DECLARE_TLV_DB_SCALE(mic_tlv, 1600, 100, 0);
 
 static DECLARE_TLV_DB_SCALE(pga_tlv, -600, 50, 0);
 
-static DECLARE_TLV_DB_SCALE(mix_tlv, -50, 50, 0);
+static DECLARE_TLV_DB_SCALE(mix_tlv, -5150, 50, 0);
 
 static DECLARE_TLV_DB_SCALE(beep_tlv, -56, 200, 0);
 
@@ -364,7 +364,7 @@ static const struct snd_kcontrol_new cs42l52_snd_controls[] = {
 			      CS42L52_ADCB_VOL, 0, 0xA0, 0x78, ipd_tlv),
 	SOC_DOUBLE_R_SX_TLV("ADC Mixer Volume",
 			     CS42L52_ADCA_MIXER_VOL, CS42L52_ADCB_MIXER_VOL,
-				0, 0x19, 0x7F, ipd_tlv),
+				0, 0x19, 0x7F, mix_tlv),
 
 	SOC_DOUBLE("ADC Switch", CS42L52_ADC_MISC_CTL, 0, 1, 1, 0),
 
-- 
2.35.1

[PATCH 5.10 09/84] ASoC: cs35l36: Update digital volume TLV

[Greg Kroah-Hartman]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit 5005a2345825eb8346546d99bfe669f73111b5c5 ]

The digital volume TLV specifies the step as 0.25dB but the actual step
of the control is 0.125dB. Update the TLV to correct this.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs35l36.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/cs35l36.c b/sound/soc/codecs/cs35l36.c
index e9b5f76f27a8..aa32b8c26578 100644
--- a/sound/soc/codecs/cs35l36.c
+++ b/sound/soc/codecs/cs35l36.c
@@ -444,7 +444,8 @@ static bool cs35l36_volatile_reg(struct device *dev, unsigned int reg)
 	}
 }
 
-static DECLARE_TLV_DB_SCALE(dig_vol_tlv, -10200, 25, 0);
+static const DECLARE_TLV_DB_RANGE(dig_vol_tlv, 0, 912,
+				  TLV_DB_MINMAX_ITEM(-10200, 1200));
 static DECLARE_TLV_DB_SCALE(amp_gain_tlv, 0, 1, 1);
 
 static const char * const cs35l36_pcm_sftramp_text[] =  {
-- 
2.35.1

[PATCH 5.10 10/84] ASoC: cs53l30: Correct number of volume levels on SX controls

[Greg Kroah-Hartman]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit 7fbd6dd68127927e844912a16741016d432a0737 ]

This driver specified the maximum value rather than the number of volume
levels on the SX controls, this is incorrect, so correct them.

Reported-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs53l30.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/sound/soc/codecs/cs53l30.c b/sound/soc/codecs/cs53l30.c
index ed22361b35c1..a5a383b92305 100644
--- a/sound/soc/codecs/cs53l30.c
+++ b/sound/soc/codecs/cs53l30.c
@@ -347,22 +347,22 @@ static const struct snd_kcontrol_new cs53l30_snd_controls[] = {
 	SOC_ENUM("ADC2 NG Delay", adc2_ng_delay_enum),
 
 	SOC_SINGLE_SX_TLV("ADC1A PGA Volume",
-		    CS53L30_ADC1A_AFE_CTL, 0, 0x34, 0x18, pga_tlv),
+		    CS53L30_ADC1A_AFE_CTL, 0, 0x34, 0x24, pga_tlv),
 	SOC_SINGLE_SX_TLV("ADC1B PGA Volume",
-		    CS53L30_ADC1B_AFE_CTL, 0, 0x34, 0x18, pga_tlv),
+		    CS53L30_ADC1B_AFE_CTL, 0, 0x34, 0x24, pga_tlv),
 	SOC_SINGLE_SX_TLV("ADC2A PGA Volume",
-		    CS53L30_ADC2A_AFE_CTL, 0, 0x34, 0x18, pga_tlv),
+		    CS53L30_ADC2A_AFE_CTL, 0, 0x34, 0x24, pga_tlv),
 	SOC_SINGLE_SX_TLV("ADC2B PGA Volume",
-		    CS53L30_ADC2B_AFE_CTL, 0, 0x34, 0x18, pga_tlv),
+		    CS53L30_ADC2B_AFE_CTL, 0, 0x34, 0x24, pga_tlv),
 
 	SOC_SINGLE_SX_TLV("ADC1A Digital Volume",
-		    CS53L30_ADC1A_DIG_VOL, 0, 0xA0, 0x0C, dig_tlv),
+		    CS53L30_ADC1A_DIG_VOL, 0, 0xA0, 0x6C, dig_tlv),
 	SOC_SINGLE_SX_TLV("ADC1B Digital Volume",
-		    CS53L30_ADC1B_DIG_VOL, 0, 0xA0, 0x0C, dig_tlv),
+		    CS53L30_ADC1B_DIG_VOL, 0, 0xA0, 0x6C, dig_tlv),
 	SOC_SINGLE_SX_TLV("ADC2A Digital Volume",
-		    CS53L30_ADC2A_DIG_VOL, 0, 0xA0, 0x0C, dig_tlv),
+		    CS53L30_ADC2A_DIG_VOL, 0, 0xA0, 0x6C, dig_tlv),
 	SOC_SINGLE_SX_TLV("ADC2B Digital Volume",
-		    CS53L30_ADC2B_DIG_VOL, 0, 0xA0, 0x0C, dig_tlv),
+		    CS53L30_ADC2B_DIG_VOL, 0, 0xA0, 0x6C, dig_tlv),
 };
 
 static const struct snd_soc_dapm_widget cs53l30_dapm_widgets[] = {
-- 
2.35.1

[PATCH 5.10 11/84] ASoC: cs42l52: Correct TLV for Bypass Volume

[Greg Kroah-Hartman]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit 91e90c712fade0b69cdff7cc6512f6099bd18ae5 ]

The Bypass Volume is accidentally using a -6dB minimum TLV rather than
the correct -60dB minimum. Add a new TLV to correct this.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs42l52.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c
index 750e6c923512..38223641bdf6 100644
--- a/sound/soc/codecs/cs42l52.c
+++ b/sound/soc/codecs/cs42l52.c
@@ -137,6 +137,8 @@ static DECLARE_TLV_DB_SCALE(mic_tlv, 1600, 100, 0);
 
 static DECLARE_TLV_DB_SCALE(pga_tlv, -600, 50, 0);
 
+static DECLARE_TLV_DB_SCALE(pass_tlv, -6000, 50, 0);
+
 static DECLARE_TLV_DB_SCALE(mix_tlv, -5150, 50, 0);
 
 static DECLARE_TLV_DB_SCALE(beep_tlv, -56, 200, 0);
@@ -351,7 +353,7 @@ static const struct snd_kcontrol_new cs42l52_snd_controls[] = {
 			      CS42L52_SPKB_VOL, 0, 0x40, 0xC0, hl_tlv),
 
 	SOC_DOUBLE_R_SX_TLV("Bypass Volume", CS42L52_PASSTHRUA_VOL,
-			      CS42L52_PASSTHRUB_VOL, 0, 0x88, 0x90, pga_tlv),
+			      CS42L52_PASSTHRUB_VOL, 0, 0x88, 0x90, pass_tlv),
 
 	SOC_DOUBLE("Bypass Mute", CS42L52_MISC_CTL, 4, 5, 1, 0),
 
-- 
2.35.1

[PATCH 5.10 12/84] ASoC: cs42l56: Correct typo in minimum level for SX volume controls

[Greg Kroah-Hartman]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit a8928ada9b96944cadd8b65d191e33199fd38782 ]

A couple of the SX volume controls specify 0x84 as the lowest volume
value, however the correct value from the datasheet is 0x44. The
datasheet don't include spaces in the value it displays as binary so
this was almost certainly just a typo reading 1000100.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs42l56.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/cs42l56.c b/sound/soc/codecs/cs42l56.c
index 06dcfae9dfe7..d41e03193106 100644
--- a/sound/soc/codecs/cs42l56.c
+++ b/sound/soc/codecs/cs42l56.c
@@ -391,9 +391,9 @@ static const struct snd_kcontrol_new cs42l56_snd_controls[] = {
 	SOC_DOUBLE("ADC Boost Switch", CS42L56_GAIN_BIAS_CTL, 3, 2, 1, 1),
 
 	SOC_DOUBLE_R_SX_TLV("Headphone Volume", CS42L56_HPA_VOLUME,
-			      CS42L56_HPB_VOLUME, 0, 0x84, 0x48, hl_tlv),
+			      CS42L56_HPB_VOLUME, 0, 0x44, 0x48, hl_tlv),
 	SOC_DOUBLE_R_SX_TLV("LineOut Volume", CS42L56_LOA_VOLUME,
-			      CS42L56_LOB_VOLUME, 0, 0x84, 0x48, hl_tlv),
+			      CS42L56_LOB_VOLUME, 0, 0x44, 0x48, hl_tlv),
 
 	SOC_SINGLE_TLV("Bass Shelving Volume", CS42L56_TONE_CTL,
 			0, 0x00, 1, tone_tlv),
-- 
2.35.1

[PATCH 5.10 13/84] ASoC: cs42l51: Correct minimum value for SX volume control

[Greg Kroah-Hartman]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit fcb3b5a58926d16d9a338841b74af06d4c29be15 ]

The minimum value for the PGA Volume is given as 0x1A, however the
values from there to 0x19 are all the same volume and this is not
represented in the TLV structure. The number of volumes given is correct
so this leads to all the volumes being shifted. Move the minimum value
up to 0x19 to fix this.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs42l51.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/cs42l51.c b/sound/soc/codecs/cs42l51.c
index c61b17dc2af8..fc6a2bc311b4 100644
--- a/sound/soc/codecs/cs42l51.c
+++ b/sound/soc/codecs/cs42l51.c
@@ -146,7 +146,7 @@ static const struct snd_kcontrol_new cs42l51_snd_controls[] = {
 			0, 0xA0, 96, adc_att_tlv),
 	SOC_DOUBLE_R_SX_TLV("PGA Volume",
 			CS42L51_ALC_PGA_CTL, CS42L51_ALC_PGB_CTL,
-			0, 0x1A, 30, pga_tlv),
+			0, 0x19, 30, pga_tlv),
 	SOC_SINGLE("Playback Deemphasis Switch", CS42L51_DAC_CTL, 3, 1, 0),
 	SOC_SINGLE("Auto-Mute Switch", CS42L51_DAC_CTL, 2, 1, 0),
 	SOC_SINGLE("Soft Ramp Switch", CS42L51_DAC_CTL, 1, 1, 0),
-- 
2.35.1

[PATCH 5.10 14/84] ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo()

[Greg Kroah-Hartman]

From: Sergey Shtylyov <s.shtylyov@omp.ru>

[ Upstream commit bf476fe22aa1851bab4728e0c49025a6a0bea307 ]

In an unlikely (and probably wrong?) case that the 'ppi' parameter of
ata_host_alloc_pinfo() points to an array starting with a NULL pointer,
there's going to be a kernel oops as the 'pi' local variable won't get
reassigned from the initial value of NULL. Initialize 'pi' instead to
'&ata_dummy_port_info' to fix the possible kernel oops for good...

Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.

Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/libata-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index f963a0a7da46..2402fa4d8aa5 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5475,7 +5475,7 @@ struct ata_host *ata_host_alloc_pinfo(struct device *dev,
 				      const struct ata_port_info * const * ppi,
 				      int n_ports)
 {
-	const struct ata_port_info *pi;
+	const struct ata_port_info *pi = &ata_dummy_port_info;
 	struct ata_host *host;
 	int i, j;
 
@@ -5483,7 +5483,7 @@ struct ata_host *ata_host_alloc_pinfo(struct device *dev,
 	if (!host)
 		return NULL;
 
-	for (i = 0, j = 0, pi = NULL; i < host->n_ports; i++) {
+	for (i = 0, j = 0; i < host->n_ports; i++) {
 		struct ata_port *ap = host->ports[i];
 
 		if (ppi[j])
-- 
2.35.1

[PATCH 5.10 15/84] quota: Prevent memory allocation recursion while holding dq_lock

[Greg Kroah-Hartman]

From: Matthew Wilcox (Oracle) <willy@infradead.org>

[ Upstream commit 537e11cdc7a6b3ce94fa25ed41306193df9677b7 ]

As described in commit 02117b8ae9c0 ("f2fs: Set GF_NOFS in
read_cache_page_gfp while doing f2fs_quota_read"), we must not enter
filesystem reclaim while holding the dq_lock.  Prevent this more generally
by using memalloc_nofs_save() while holding the lock.

Link: https://lore.kernel.org/r/20220605143815.2330891-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/dquot.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 09fb8459bb5c..65f123d5809b 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -79,6 +79,7 @@
 #include <linux/capability.h>
 #include <linux/quotaops.h>
 #include <linux/blkdev.h>
+#include <linux/sched/mm.h>
 #include "../internal.h" /* ugh */
 
 #include <linux/uaccess.h>
@@ -427,9 +428,11 @@ EXPORT_SYMBOL(mark_info_dirty);
 int dquot_acquire(struct dquot *dquot)
 {
 	int ret = 0, ret2 = 0;
+	unsigned int memalloc;
 	struct quota_info *dqopt = sb_dqopt(dquot->dq_sb);
 
 	mutex_lock(&dquot->dq_lock);
+	memalloc = memalloc_nofs_save();
 	if (!test_bit(DQ_READ_B, &dquot->dq_flags)) {
 		ret = dqopt->ops[dquot->dq_id.type]->read_dqblk(dquot);
 		if (ret < 0)
@@ -460,6 +463,7 @@ int dquot_acquire(struct dquot *dquot)
 	smp_mb__before_atomic();
 	set_bit(DQ_ACTIVE_B, &dquot->dq_flags);
 out_iolock:
+	memalloc_nofs_restore(memalloc);
 	mutex_unlock(&dquot->dq_lock);
 	return ret;
 }
@@ -471,9 +475,11 @@ EXPORT_SYMBOL(dquot_acquire);
 int dquot_commit(struct dquot *dquot)
 {
 	int ret = 0;
+	unsigned int memalloc;
 	struct quota_info *dqopt = sb_dqopt(dquot->dq_sb);
 
 	mutex_lock(&dquot->dq_lock);
+	memalloc = memalloc_nofs_save();
 	if (!clear_dquot_dirty(dquot))
 		goto out_lock;
 	/* Inactive dquot can be only if there was error during read/init
@@ -483,6 +489,7 @@ int dquot_commit(struct dquot *dquot)
 	else
 		ret = -EIO;
 out_lock:
+	memalloc_nofs_restore(memalloc);
 	mutex_unlock(&dquot->dq_lock);
 	return ret;
 }
@@ -494,9 +501,11 @@ EXPORT_SYMBOL(dquot_commit);
 int dquot_release(struct dquot *dquot)
 {
 	int ret = 0, ret2 = 0;
+	unsigned int memalloc;
 	struct quota_info *dqopt = sb_dqopt(dquot->dq_sb);
 
 	mutex_lock(&dquot->dq_lock);
+	memalloc = memalloc_nofs_save();
 	/* Check whether we are not racing with some other dqget() */
 	if (dquot_is_busy(dquot))
 		goto out_dqlock;
@@ -512,6 +521,7 @@ int dquot_release(struct dquot *dquot)
 	}
 	clear_bit(DQ_ACTIVE_B, &dquot->dq_flags);
 out_dqlock:
+	memalloc_nofs_restore(memalloc);
 	mutex_unlock(&dquot->dq_lock);
 	return ret;
 }
-- 
2.35.1

[PATCH 5.10 16/84] ASoC: wm8962: Fix suspend while playing music

[Greg Kroah-Hartman]

From: Adam Ford <aford173@gmail.com>

[ Upstream commit d1f5272c0f7d2e53c6f2480f46725442776f5f78 ]

If the audio CODEC is playing sound when the system is suspended,
it can be left in a state which throws the following error:

wm8962 3-001a: ASoC: error at soc_component_read_no_lock on wm8962.3-001a: -16

Once this error has occurred, the audio will not work again until rebooted.

Fix this by configuring SET_SYSTEM_SLEEP_PM_OPS.

Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220526182129.538472-1-aford173@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8962.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 0bd3bbc2aacf..38651022e3d5 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -3864,6 +3864,7 @@ static int wm8962_runtime_suspend(struct device *dev)
 #endif
 
 static const struct dev_pm_ops wm8962_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
 	SET_RUNTIME_PM_OPS(wm8962_runtime_suspend, wm8962_runtime_resume, NULL)
 };
 
-- 
2.35.1

[PATCH 5.10 17/84] ASoC: es8328: Fix event generation for deemphasis control

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 8259610c2ec01c5cbfb61882ae176aabacac9c19 ]

Currently the put() method for the deemphasis control returns 0 when a new
value is written to the control even if the value changed, meaning events
are not generated. Fix this, skip the work of updating the value when it is
unchanged and then return 1 after having done so.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220603123937.4013603-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/es8328.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/es8328.c b/sound/soc/codecs/es8328.c
index 7e26231a596a..081b5f189632 100644
--- a/sound/soc/codecs/es8328.c
+++ b/sound/soc/codecs/es8328.c
@@ -161,13 +161,16 @@ static int es8328_put_deemph(struct snd_kcontrol *kcontrol,
 	if (deemph > 1)
 		return -EINVAL;
 
+	if (es8328->deemph == deemph)
+		return 0;
+
 	ret = es8328_set_deemph(component);
 	if (ret < 0)
 		return ret;
 
 	es8328->deemph = deemph;
 
-	return 0;
+	return 1;
 }
 
 
-- 
2.35.1

[PATCH 5.10 18/84] ASoC: wm_adsp: Fix event generation for wm_adsp_fw_put()

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 2abdf9f80019e8244d3806ed0e1c9f725e50b452 ]

Currently wm_adsp_fw_put() returns 0 rather than 1 when updating the value
of the control, meaning that no event is generated to userspace. Fix this
by setting the default return value to 1, the code already exits early with
a return value of 0 if the value is unchanged.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220603115003.3865834-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm_adsp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c
index 51d95437e0fd..10189f44af28 100644
--- a/sound/soc/codecs/wm_adsp.c
+++ b/sound/soc/codecs/wm_adsp.c
@@ -800,7 +800,7 @@ int wm_adsp_fw_put(struct snd_kcontrol *kcontrol,
 	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
 	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
 	struct wm_adsp *dsp = snd_soc_component_get_drvdata(component);
-	int ret = 0;
+	int ret = 1;
 
 	if (ucontrol->value.enumerated.item[0] == dsp[e->shift_l].fw)
 		return 0;
-- 
2.35.1

[PATCH 5.10 19/84] Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to dmi_use_low_level_irq

[Greg Kroah-Hartman]

From: Marius Hoch <mail@mariushoch.de>

[ Upstream commit 6ab2e51898cd4343bbdf8587af8ce8fbabddbcb5 ]

Commit 223f61b8c5ad ("Input: soc_button_array - add Lenovo Yoga Tablet2
1051L to the dmi_use_low_level_irq list") added the 1051L to this list
already, but the same problem applies to the 1051F. As there are no
further 1051 variants (just the F/L), we can just DMI match 1051.

Tested on a Lenovo Yoga Tablet2 1051F: Without this patch the
home-button stops working after a wakeup from suspend.

Signed-off-by: Marius Hoch <mail@mariushoch.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220603120246.3065-1-mail@mariushoch.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/misc/soc_button_array.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c
index cb6ec59a045d..efffcf0ebd3b 100644
--- a/drivers/input/misc/soc_button_array.c
+++ b/drivers/input/misc/soc_button_array.c
@@ -85,13 +85,13 @@ static const struct dmi_system_id dmi_use_low_level_irq[] = {
 	},
 	{
 		/*
-		 * Lenovo Yoga Tab2 1051L, something messes with the home-button
+		 * Lenovo Yoga Tab2 1051F/1051L, something messes with the home-button
 		 * IRQ settings, leading to a non working home-button.
 		 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "60073"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "1051L"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "1051"),
 		},
 	},
 	{} /* Terminating entry */
-- 
2.35.1

[PATCH 5.10 20/84] scsi: vmw_pvscsi: Expand vcpuHint to 16 bits

[Greg Kroah-Hartman]

From: Wentao Wang <wwentao@vmware.com>

[ Upstream commit cf71d59c2eceadfcde0fb52e237990a0909880d7 ]

vcpuHint has been expanded to 16 bit on host to enable routing to more
CPUs. Guest side should align with the change. This change has been tested
with hosts with 8-bit and 16-bit vcpuHint, on both platforms host side can
get correct value.

Link: https://lore.kernel.org/r/EF35F4D5-5DCC-42C5-BCC4-29DF1729B24C@vmware.com
Signed-off-by: Wentao Wang <wwentao@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/vmw_pvscsi.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/vmw_pvscsi.h b/drivers/scsi/vmw_pvscsi.h
index 75966d3f326e..d87c12324c03 100644
--- a/drivers/scsi/vmw_pvscsi.h
+++ b/drivers/scsi/vmw_pvscsi.h
@@ -333,8 +333,8 @@ struct PVSCSIRingReqDesc {
 	u8	tag;
 	u8	bus;
 	u8	target;
-	u8	vcpuHint;
-	u8	unused[59];
+	u16	vcpuHint;
+	u8	unused[58];
 } __packed;
 
 /*
-- 
2.35.1

[PATCH 5.10 21/84] scsi: lpfc: Fix port stuck in bypassed state after LIP in PT2PT topology

[Greg Kroah-Hartman]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 336d63615466b4c06b9401c987813fd19bdde39b ]

After issuing a LIP, a specific target vendor does not ACC the FLOGI that
lpfc sends.  However, it does send its own FLOGI that lpfc ACCs.  The
target then establishes the port IDs by sending a PLOGI.  lpfc PLOGI_ACCs
and starts the RPI registration for DID 0x000001.  The target then sends a
LOGO to the fabric DID.  lpfc is currently treating the LOGO from the
fabric DID as a link down and cleans up all the ndlps.  The ndlp for DID
0x000001 is put back into NPR and discovery stops, leaving the port in
stuck in bypassed mode.

Change lpfc behavior such that if a LOGO is received for the fabric DID in
PT2PT topology skip the lpfc_linkdown_port() routine and just move the
fabric DID back to NPR.

Link: https://lore.kernel.org/r/20220603174329.63777-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_nportdisc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index e33f752318c1..1e22364a31fc 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -857,7 +857,8 @@ lpfc_rcv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		lpfc_nvmet_invalidate_host(phba, ndlp);
 
 	if (ndlp->nlp_DID == Fabric_DID) {
-		if (vport->port_state <= LPFC_FDISC)
+		if (vport->port_state <= LPFC_FDISC ||
+		    vport->fc_flag & FC_PT2PT)
 			goto out;
 		lpfc_linkdown_port(vport);
 		spin_lock_irq(shost->host_lock);
-- 
2.35.1

[PATCH 5.10 22/84] scsi: lpfc: Allow reduced polling rate for nvme_admin_async_event cmd completion

[Greg Kroah-Hartman]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 2e7e9c0c1ec05f18d320ecc8a31eec59d2af1af9 ]

NVMe Asynchronous Event Request commands have no command timeout value per
specifications.

Set WQE option to allow a reduced FLUSH polling rate for I/O error
detection specifically for nvme_admin_async_event commands.

Link: https://lore.kernel.org/r/20220603174329.63777-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_hw4.h  |  3 +++
 drivers/scsi/lpfc/lpfc_nvme.c | 11 +++++++++--
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 47e832b7f2c2..bfbc1c4fcab1 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -4281,6 +4281,9 @@ struct wqe_common {
 #define wqe_sup_SHIFT         6
 #define wqe_sup_MASK          0x00000001
 #define wqe_sup_WORD          word11
+#define wqe_ffrq_SHIFT         6
+#define wqe_ffrq_MASK          0x00000001
+#define wqe_ffrq_WORD          word11
 #define wqe_wqec_SHIFT        7
 #define wqe_wqec_MASK         0x00000001
 #define wqe_wqec_WORD         word11
diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
index 03c81cec6bc9..ef92e0b4b9cf 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -1315,7 +1315,8 @@ lpfc_nvme_prep_io_cmd(struct lpfc_vport *vport,
 {
 	struct lpfc_hba *phba = vport->phba;
 	struct nvmefc_fcp_req *nCmd = lpfc_ncmd->nvmeCmd;
-	struct lpfc_iocbq *pwqeq = &(lpfc_ncmd->cur_iocbq);
+	struct nvme_common_command *sqe;
+	struct lpfc_iocbq *pwqeq = &lpfc_ncmd->cur_iocbq;
 	union lpfc_wqe128 *wqe = &pwqeq->wqe;
 	uint32_t req_len;
 
@@ -1371,8 +1372,14 @@ lpfc_nvme_prep_io_cmd(struct lpfc_vport *vport,
 		cstat->control_requests++;
 	}
 
-	if (pnode->nlp_nvme_info & NLP_NVME_NSLER)
+	if (pnode->nlp_nvme_info & NLP_NVME_NSLER) {
 		bf_set(wqe_erp, &wqe->generic.wqe_com, 1);
+		sqe = &((struct nvme_fc_cmd_iu *)
+			nCmd->cmdaddr)->sqe.common;
+		if (sqe->opcode == nvme_admin_async_event)
+			bf_set(wqe_ffrq, &wqe->generic.wqe_com, 1);
+	}
+
 	/*
 	 * Finish initializing those WQE fields that are independent
 	 * of the nvme_cmnd request_buffer
-- 
2.35.1

[PATCH 5.10 23/84] scsi: ipr: Fix missing/incorrect resource cleanup in error case

[Greg Kroah-Hartman]

From: Chengguang Xu <cgxu519@mykernel.net>

[ Upstream commit d64c491911322af1dcada98e5b9ee0d87e8c8fee ]

Fix missing resource cleanup (when '(--i) == 0') for error case in
ipr_alloc_mem() and skip incorrect resource cleanup (when '(--i) == 0') for
error case in ipr_request_other_msi_irqs() because variable i started from
1.

Link: https://lore.kernel.org/r/20220529153456.4183738-4-cgxu519@mykernel.net
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ipr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index b0aa58d117cc..90e8a538b078 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -9792,7 +9792,7 @@ static int ipr_alloc_mem(struct ipr_ioa_cfg *ioa_cfg)
 					GFP_KERNEL);
 
 		if (!ioa_cfg->hrrq[i].host_rrq)  {
-			while (--i > 0)
+			while (--i >= 0)
 				dma_free_coherent(&pdev->dev,
 					sizeof(u32) * ioa_cfg->hrrq[i].size,
 					ioa_cfg->hrrq[i].host_rrq,
@@ -10065,7 +10065,7 @@ static int ipr_request_other_msi_irqs(struct ipr_ioa_cfg *ioa_cfg,
 			ioa_cfg->vectors_info[i].desc,
 			&ioa_cfg->hrrq[i]);
 		if (rc) {
-			while (--i >= 0)
+			while (--i > 0)
 				free_irq(pci_irq_vector(pdev, i),
 					&ioa_cfg->hrrq[i]);
 			return rc;
-- 
2.35.1

[PATCH 5.10 24/84] scsi: pmcraid: Fix missing resource cleanup in error case

[Greg Kroah-Hartman]

From: Chengguang Xu <cgxu519@mykernel.net>

[ Upstream commit ec1e8adcbdf661c57c395bca342945f4f815add7 ]

Fix missing resource cleanup (when '(--i) == 0') for error case in
pmcraid_register_interrupt_handler().

Link: https://lore.kernel.org/r/20220529153456.4183738-6-cgxu519@mykernel.net
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/pmcraid.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index cbe5fab793eb..ce10d680c56c 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -4528,7 +4528,7 @@ pmcraid_register_interrupt_handler(struct pmcraid_instance *pinstance)
 	return 0;
 
 out_unwind:
-	while (--i > 0)
+	while (--i >= 0)
 		free_irq(pci_irq_vector(pdev, i), &pinstance->hrrq_vector[i]);
 	pci_free_irq_vectors(pdev);
 	return rc;
-- 
2.35.1

[PATCH 5.10 25/84] ALSA: hda/realtek - Add HW8326 support

[Greg Kroah-Hartman]

From: huangwenhui <huangwenhuia@uniontech.com>

[ Upstream commit 527f4643e03c298c1e3321cfa27866b1374a55e1 ]

Added the support of new Huawei codec HW8326. The HW8326 is developed
by Huawei with Realtek's IP Core, and it's compatible with ALC256.

Signed-off-by: huangwenhui <huangwenhuia@uniontech.com>
Link: https://lore.kernel.org/r/20220608082357.26898-1-huangwenhuia@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/hda/hdac_device.c       |  1 +
 sound/pci/hda/patch_realtek.c | 14 ++++++++++++++
 2 files changed, 15 insertions(+)

diff --git a/sound/hda/hdac_device.c b/sound/hda/hdac_device.c
index 3e9e9ac804f6..b7e5032b61c9 100644
--- a/sound/hda/hdac_device.c
+++ b/sound/hda/hdac_device.c
@@ -660,6 +660,7 @@ static const struct hda_vendor_id hda_vendor_ids[] = {
 	{ 0x14f1, "Conexant" },
 	{ 0x17e8, "Chrontel" },
 	{ 0x1854, "LG" },
+	{ 0x19e5, "Huawei" },
 	{ 0x1aec, "Wolfson Microelectronics" },
 	{ 0x1af4, "QEMU" },
 	{ 0x434d, "C-Media" },
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index cf3b1133b785..83b5c2580c8f 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -439,6 +439,7 @@ static void alc_fill_eapd_coef(struct hda_codec *codec)
 	case 0x10ec0245:
 	case 0x10ec0255:
 	case 0x10ec0256:
+	case 0x19e58326:
 	case 0x10ec0257:
 	case 0x10ec0282:
 	case 0x10ec0283:
@@ -576,6 +577,7 @@ static void alc_shutup_pins(struct hda_codec *codec)
 	switch (codec->core.vendor_id) {
 	case 0x10ec0236:
 	case 0x10ec0256:
+	case 0x19e58326:
 	case 0x10ec0283:
 	case 0x10ec0286:
 	case 0x10ec0288:
@@ -3252,6 +3254,7 @@ static void alc_disable_headset_jack_key(struct hda_codec *codec)
 	case 0x10ec0230:
 	case 0x10ec0236:
 	case 0x10ec0256:
+	case 0x19e58326:
 		alc_write_coef_idx(codec, 0x48, 0x0);
 		alc_update_coef_idx(codec, 0x49, 0x0045, 0x0);
 		break;
@@ -3280,6 +3283,7 @@ static void alc_enable_headset_jack_key(struct hda_codec *codec)
 	case 0x10ec0230:
 	case 0x10ec0236:
 	case 0x10ec0256:
+	case 0x19e58326:
 		alc_write_coef_idx(codec, 0x48, 0xd011);
 		alc_update_coef_idx(codec, 0x49, 0x007f, 0x0045);
 		break;
@@ -4849,6 +4853,7 @@ static void alc_headset_mode_unplugged(struct hda_codec *codec)
 	case 0x10ec0230:
 	case 0x10ec0236:
 	case 0x10ec0256:
+	case 0x19e58326:
 		alc_process_coef_fw(codec, coef0256);
 		break;
 	case 0x10ec0234:
@@ -4964,6 +4969,7 @@ static void alc_headset_mode_mic_in(struct hda_codec *codec, hda_nid_t hp_pin,
 	case 0x10ec0230:
 	case 0x10ec0236:
 	case 0x10ec0256:
+	case 0x19e58326:
 		alc_write_coef_idx(codec, 0x45, 0xc489);
 		snd_hda_set_pin_ctl_cache(codec, hp_pin, 0);
 		alc_process_coef_fw(codec, coef0256);
@@ -5114,6 +5120,7 @@ static void alc_headset_mode_default(struct hda_codec *codec)
 	case 0x10ec0230:
 	case 0x10ec0236:
 	case 0x10ec0256:
+	case 0x19e58326:
 		alc_write_coef_idx(codec, 0x1b, 0x0e4b);
 		alc_write_coef_idx(codec, 0x45, 0xc089);
 		msleep(50);
@@ -5213,6 +5220,7 @@ static void alc_headset_mode_ctia(struct hda_codec *codec)
 	case 0x10ec0230:
 	case 0x10ec0236:
 	case 0x10ec0256:
+	case 0x19e58326:
 		alc_process_coef_fw(codec, coef0256);
 		break;
 	case 0x10ec0234:
@@ -5327,6 +5335,7 @@ static void alc_headset_mode_omtp(struct hda_codec *codec)
 	case 0x10ec0230:
 	case 0x10ec0236:
 	case 0x10ec0256:
+	case 0x19e58326:
 		alc_process_coef_fw(codec, coef0256);
 		break;
 	case 0x10ec0234:
@@ -5428,6 +5437,7 @@ static void alc_determine_headset_type(struct hda_codec *codec)
 	case 0x10ec0230:
 	case 0x10ec0236:
 	case 0x10ec0256:
+	case 0x19e58326:
 		alc_write_coef_idx(codec, 0x1b, 0x0e4b);
 		alc_write_coef_idx(codec, 0x06, 0x6104);
 		alc_write_coefex_idx(codec, 0x57, 0x3, 0x09a3);
@@ -5722,6 +5732,7 @@ static void alc255_set_default_jack_type(struct hda_codec *codec)
 	case 0x10ec0230:
 	case 0x10ec0236:
 	case 0x10ec0256:
+	case 0x19e58326:
 		alc_process_coef_fw(codec, alc256fw);
 		break;
 	}
@@ -6325,6 +6336,7 @@ static void alc_combo_jack_hp_jd_restart(struct hda_codec *codec)
 	case 0x10ec0236:
 	case 0x10ec0255:
 	case 0x10ec0256:
+	case 0x19e58326:
 		alc_update_coef_idx(codec, 0x1b, 0x8000, 1 << 15); /* Reset HP JD */
 		alc_update_coef_idx(codec, 0x1b, 0x8000, 0 << 15);
 		break;
@@ -9813,6 +9825,7 @@ static int patch_alc269(struct hda_codec *codec)
 	case 0x10ec0230:
 	case 0x10ec0236:
 	case 0x10ec0256:
+	case 0x19e58326:
 		spec->codec_variant = ALC269_TYPE_ALC256;
 		spec->shutup = alc256_shutup;
 		spec->init_hook = alc256_init;
@@ -11255,6 +11268,7 @@ static const struct hda_device_id snd_hda_id_realtek[] = {
 	HDA_CODEC_ENTRY(0x10ec0b00, "ALCS1200A", patch_alc882),
 	HDA_CODEC_ENTRY(0x10ec1168, "ALC1220", patch_alc882),
 	HDA_CODEC_ENTRY(0x10ec1220, "ALC1220", patch_alc882),
+	HDA_CODEC_ENTRY(0x19e58326, "HW8326", patch_alc269),
 	{} /* terminator */
 };
 MODULE_DEVICE_TABLE(hdaudio, snd_hda_id_realtek);
-- 
2.35.1

[PATCH 5.10 26/84] virtio-mmio: fix missing put_device() when vm_cmdline_parent registration failed

[Greg Kroah-Hartman]

From: chengkaitao <pilgrimtao@gmail.com>

[ Upstream commit a58a7f97ba11391d2d0d408e0b24f38d86ae748e ]

The reference must be released when device_register(&vm_cmdline_parent)
failed. Add the corresponding 'put_device()' in the error handling path.

Signed-off-by: chengkaitao <pilgrimtao@gmail.com>
Message-Id: <20220602005542.16489-1-chengkaitao@didiglobal.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/virtio/virtio_mmio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
index 238383ff1064..5c970e6f664c 100644
--- a/drivers/virtio/virtio_mmio.c
+++ b/drivers/virtio/virtio_mmio.c
@@ -689,6 +689,7 @@ static int vm_cmdline_set(const char *device,
 	if (!vm_cmdline_parent_registered) {
 		err = device_register(&vm_cmdline_parent);
 		if (err) {
+			put_device(&vm_cmdline_parent);
 			pr_err("Failed to register parent device!\n");
 			return err;
 		}
-- 
2.35.1

[PATCH 5.10 27/84] nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred

[Greg Kroah-Hartman]

From: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>

[ Upstream commit 8a4d480702b71184fabcf379b80bf7539716752e ]

Similar to the handling of play_deferred in commit 19cfe912c37b
("Bluetooth: btusb: Fix memory leak in play_deferred"), we thought
a patch might be needed here as well.

Currently usb_submit_urb is called directly to submit deferred tx
urbs after unanchor them.

So the usb_giveback_urb_bh would failed to unref it in usb_unanchor_urb
and cause memory leak.

Put those urbs in tx_anchor to avoid the leak, and also fix the error
handling.

Signed-off-by: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220607083230.6182-1-xiaohuizhang@ruc.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/nfcmrvl/usb.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/nfc/nfcmrvl/usb.c b/drivers/nfc/nfcmrvl/usb.c
index 888e298f610b..f26986eb53f1 100644
--- a/drivers/nfc/nfcmrvl/usb.c
+++ b/drivers/nfc/nfcmrvl/usb.c
@@ -401,13 +401,25 @@ static void nfcmrvl_play_deferred(struct nfcmrvl_usb_drv_data *drv_data)
 	int err;
 
 	while ((urb = usb_get_from_anchor(&drv_data->deferred))) {
+		usb_anchor_urb(urb, &drv_data->tx_anchor);
+
 		err = usb_submit_urb(urb, GFP_ATOMIC);
-		if (err)
+		if (err) {
+			kfree(urb->setup_packet);
+			usb_unanchor_urb(urb);
+			usb_free_urb(urb);
 			break;
+		}
 
 		drv_data->tx_in_flight++;
+		usb_free_urb(urb);
+	}
+
+	/* Cleanup the rest deferred urbs. */
+	while ((urb = usb_get_from_anchor(&drv_data->deferred))) {
+		kfree(urb->setup_packet);
+		usb_free_urb(urb);
 	}
-	usb_scuttle_anchored_urbs(&drv_data->deferred);
 }
 
 static int nfcmrvl_resume(struct usb_interface *intf)
-- 
2.35.1

[PATCH 5.10 28/84] ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg

[Greg Kroah-Hartman]

From: Wang Yufen <wangyufen@huawei.com>

[ Upstream commit f638a84afef3dfe10554c51820c16e39a278c915 ]

When len >= INT_MAX - transhdrlen, ulen = len + transhdrlen will be
overflow. To fix, we can follow what udpv6 does and subtract the
transhdrlen from the max.

Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/20220607120028.845916-2-wangyufen@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/l2tp/l2tp_ip6.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c
index 96f975777438..d54dbd01d86f 100644
--- a/net/l2tp/l2tp_ip6.c
+++ b/net/l2tp/l2tp_ip6.c
@@ -502,14 +502,15 @@ static int l2tp_ip6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len)
 	struct ipcm6_cookie ipc6;
 	int addr_len = msg->msg_namelen;
 	int transhdrlen = 4; /* zero session-id */
-	int ulen = len + transhdrlen;
+	int ulen;
 	int err;
 
 	/* Rough check on arithmetic overflow,
 	 * better check is made in ip6_append_data().
 	 */
-	if (len > INT_MAX)
+	if (len > INT_MAX - transhdrlen)
 		return -EMSGSIZE;
+	ulen = len + transhdrlen;
 
 	/* Mirror BSD error message compatibility */
 	if (msg->msg_flags & MSG_OOB)
-- 
2.35.1

[PATCH 5.10 29/84] net: ethernet: mtk_eth_soc: fix misuse of mem alloc interface netdev[napi]_alloc_frag

[Greg Kroah-Hartman]

From: Chen Lin <chen45464546@163.com>

[ Upstream commit 2f2c0d2919a14002760f89f4e02960c735a316d2 ]

When rx_flag == MTK_RX_FLAGS_HWLRO,
rx_data_len = MTK_MAX_LRO_RX_LENGTH(4096 * 3) > PAGE_SIZE.
netdev_alloc_frag is for alloction of page fragment only.
Reference to other drivers and Documentation/vm/page_frags.rst

Branch to use __get_free_pages when ring->frag_size > PAGE_SIZE.

Signed-off-by: Chen Lin <chen45464546@163.com>
Link: https://lore.kernel.org/r/1654692413-2598-1-git-send-email-chen45464546@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 789642647cd3..c7aff89141e1 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -806,6 +806,17 @@ static inline void mtk_rx_get_desc(struct mtk_rx_dma *rxd,
 	rxd->rxd4 = READ_ONCE(dma_rxd->rxd4);
 }
 
+static void *mtk_max_lro_buf_alloc(gfp_t gfp_mask)
+{
+	unsigned int size = mtk_max_frag_size(MTK_MAX_LRO_RX_LENGTH);
+	unsigned long data;
+
+	data = __get_free_pages(gfp_mask | __GFP_COMP | __GFP_NOWARN,
+				get_order(size));
+
+	return (void *)data;
+}
+
 /* the qdma core needs scratch memory to be setup */
 static int mtk_init_fq_dma(struct mtk_eth *eth)
 {
@@ -1303,7 +1314,10 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget,
 			goto release_desc;
 
 		/* alloc new buffer */
-		new_data = napi_alloc_frag(ring->frag_size);
+		if (ring->frag_size <= PAGE_SIZE)
+			new_data = napi_alloc_frag(ring->frag_size);
+		else
+			new_data = mtk_max_lro_buf_alloc(GFP_ATOMIC);
 		if (unlikely(!new_data)) {
 			netdev->stats.rx_dropped++;
 			goto release_desc;
@@ -1700,7 +1714,10 @@ static int mtk_rx_alloc(struct mtk_eth *eth, int ring_no, int rx_flag)
 		return -ENOMEM;
 
 	for (i = 0; i < rx_dma_size; i++) {
-		ring->data[i] = netdev_alloc_frag(ring->frag_size);
+		if (ring->frag_size <= PAGE_SIZE)
+			ring->data[i] = netdev_alloc_frag(ring->frag_size);
+		else
+			ring->data[i] = mtk_max_lro_buf_alloc(GFP_KERNEL);
 		if (!ring->data[i])
 			return -ENOMEM;
 	}
-- 
2.35.1

[PATCH 5.10 30/84] mellanox: mlx5: avoid uninitialized variable warning with gcc-12

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit 842c3b3ddc5f4d17275edbaa09e23d712bf8b915 ]

gcc-12 started warning about 'tracker' being used uninitialized:

  drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c: In function ‘mlx5_do_bond’:
  drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c:786:28: warning: ‘tracker’ is used uninitialized [-Wuninitialized]
    786 |         struct lag_tracker tracker;
        |                            ^~~~~~~

which seems to be because it doesn't track how the use (and
initialization) is bound by the 'do_bond' flag.

But admittedly that 'do_bond' usage is fairly complicated, and involves
passing it around as an argument to helper functions, so it's somewhat
understandable that gcc doesn't see how that all works.

This function could be rewritten to make the use of that tracker
variable more obviously safe, but for now I'm just adding the forced
initialization of it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/lag.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag.c
index 11cc3ea5010a..9fb3e5ec1da6 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag.c
@@ -274,7 +274,7 @@ static void mlx5_do_bond(struct mlx5_lag *ldev)
 {
 	struct mlx5_core_dev *dev0 = ldev->pf[MLX5_LAG_P1].dev;
 	struct mlx5_core_dev *dev1 = ldev->pf[MLX5_LAG_P2].dev;
-	struct lag_tracker tracker;
+	struct lag_tracker tracker = { };
 	bool do_bond, roce_lag;
 	int err;
 
-- 
2.35.1

[PATCH 5.10 31/84] netfs: gcc-12: temporarily disable -Wattribute-warning for now

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit 507160f46c55913955d272ebf559d63809a8e560 ]

This is a pure band-aid so that I can continue merging stuff from people
while some of the gcc-12 fallout gets sorted out.

In particular, gcc-12 is very unhappy about the kinds of pointer
arithmetic tricks that netfs does, and that makes the fortify checks
trigger in afs and ceph:

  In function ‘fortify_memset_chk’,
      inlined from ‘netfs_i_context_init’ at include/linux/netfs.h:327:2,
      inlined from ‘afs_set_netfs_context’ at fs/afs/inode.c:61:2,
      inlined from ‘afs_root_iget’ at fs/afs/inode.c:543:2:
  include/linux/fortify-string.h:258:25: warning: call to ‘__write_overflow_field’ declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
    258 |                         __write_overflow_field(p_size_field, size);
        |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

and the reason is that netfs_i_context_init() is passed a 'struct inode'
pointer, and then it does

        struct netfs_i_context *ctx = netfs_i_context(inode);

        memset(ctx, 0, sizeof(*ctx));

where that netfs_i_context() function just does pointer arithmetic on
the inode pointer, knowing that the netfs_i_context is laid out
immediately after it in memory.

This is all truly disgusting, since the whole "netfs_i_context is laid
out immediately after it in memory" is not actually remotely true in
general, but is just made to be that way for afs and ceph.

See for example fs/cifs/cifsglob.h:

  struct cifsInodeInfo {
        struct {
                /* These must be contiguous */
                struct inode    vfs_inode;      /* the VFS's inode record */
                struct netfs_i_context netfs_ctx; /* Netfslib context */
        };
	[...]

and realize that this is all entirely wrong, and the pointer arithmetic
that netfs_i_context() is doing is also very very wrong and wouldn't
give the right answer if netfs_ctx had different alignment rules from a
'struct inode', for example).

Anyway, that's just a long-winded way to say "the gcc-12 warning is
actually quite reasonable, and our code happens to work but is pretty
disgusting".

This is getting fixed properly, but for now I made the mistake of
thinking "the week right after the merge window tends to be calm for me
as people take a breather" and I did a sustem upgrade.  And I got gcc-12
as a result, so to continue merging fixes from people and not have the
end result drown in warnings, I am fixing all these gcc-12 issues I hit.

Including with these kinds of temporary fixes.

Cc: Kees Cook <keescook@chromium.org>
Cc: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/all/AEEBCF5D-8402-441D-940B-105AA718C71F@chromium.org/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/inode.c  | 3 +++
 fs/ceph/inode.c | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index 7e7a9454bcb9..942badb9b24b 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -25,6 +25,9 @@
 #include "internal.h"
 #include "afs_fs.h"
 
+// Temporary: netfs does disgusting things with inode pointers
+#pragma GCC diagnostic ignored "-Wattribute-warning"
+
 static const struct inode_operations afs_symlink_inode_operations = {
 	.get_link	= page_get_link,
 };
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 76be50f6f041..394501d347f4 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -20,6 +20,9 @@
 #include "cache.h"
 #include <linux/ceph/decode.h>
 
+// Temporary: netfs does disgusting things with inode pointers
+#pragma GCC diagnostic ignored "-Wattribute-warning"
+
 /*
  * Ceph inode operations
  *
-- 
2.35.1

[PATCH 5.10 32/84] MIPS: Loongson-3: fix compile mips cpu_hwmon as module build error.

[Greg Kroah-Hartman]

From: Yupeng Li <liyupeng@zbhlos.com>

[ Upstream commit 41e456400212803704e82691716e1d7b0865114a ]

  set cpu_hwmon as a module build with loongson_sysconf, loongson_chiptemp
  undefined error,fix cpu_hwmon compile options to be bool.Some kernel
  compilation error information is as follows:

  Checking missing-syscalls for N32
  CALL    scripts/checksyscalls.sh
  Checking missing-syscalls for O32
  CALL    scripts/checksyscalls.sh
  CALL    scripts/checksyscalls.sh
  CHK     include/generated/compile.h
  CC [M]  drivers/platform/mips/cpu_hwmon.o
  Building modules, stage 2.
  MODPOST 200 modules
ERROR: "loongson_sysconf" [drivers/platform/mips/cpu_hwmon.ko] undefined!
ERROR: "loongson_chiptemp" [drivers/platform/mips/cpu_hwmon.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:92：__modpost] 错误 1
make: *** [Makefile:1261：modules] 错误 2

Signed-off-by: Yupeng Li <liyupeng@zbhlos.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/mips/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/platform/mips/Kconfig b/drivers/platform/mips/Kconfig
index 8ac149173c64..495da331ca2d 100644
--- a/drivers/platform/mips/Kconfig
+++ b/drivers/platform/mips/Kconfig
@@ -17,7 +17,7 @@ menuconfig MIPS_PLATFORM_DEVICES
 if MIPS_PLATFORM_DEVICES
 
 config CPU_HWMON
-	tristate "Loongson-3 CPU HWMon Driver"
+	bool "Loongson-3 CPU HWMon Driver"
 	depends on MACH_LOONGSON64
 	select HWMON
 	default y
-- 
2.35.1

[PATCH 5.10 33/84] gpio: dwapb: Dont print error on -EPROBE_DEFER

[Greg Kroah-Hartman]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit 77006f6edc0e0f58617eb25e53731f78641e820d ]

Currently if the APB or Debounce clocks aren't yet ready to be requested
the DW GPIO driver will correctly handle that by deferring the probe
procedure, but the error is still printed to the system log. It needlessly
pollutes the log since there was no real error but a request to postpone
the clock request procedure since the clocks subsystem hasn't been fully
initialized yet. Let's fix that by using the dev_err_probe method to print
the APB/clock request error status. It will correctly handle the deferred
probe situation and print the error if it actually happens.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-dwapb.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index 4275c18a097a..ea2e2618b794 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -646,10 +646,9 @@ static int dwapb_get_clks(struct dwapb_gpio *gpio)
 	gpio->clks[1].id = "db";
 	err = devm_clk_bulk_get_optional(gpio->dev, DWAPB_NR_CLOCKS,
 					 gpio->clks);
-	if (err) {
-		dev_err(gpio->dev, "Cannot get APB/Debounce clocks\n");
-		return err;
-	}
+	if (err)
+		return dev_err_probe(gpio->dev, err,
+				     "Cannot get APB/Debounce clocks\n");
 
 	err = clk_bulk_prepare_enable(DWAPB_NR_CLOCKS, gpio->clks);
 	if (err) {
-- 
2.35.1

[PATCH 5.10 34/84] random: credit cpu and bootloader seeds by default

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

[ Upstream commit 846bb97e131d7938847963cca00657c995b1fce1 ]

This commit changes the default Kconfig values of RANDOM_TRUST_CPU and
RANDOM_TRUST_BOOTLOADER to be Y by default. It does not change any
existing configs or change any kernel behavior. The reason for this is
several fold.

As background, I recently had an email thread with the kernel
maintainers of Fedora/RHEL, Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine,
SUSE, and Void as recipients. I noted that some distros trust RDRAND,
some trust EFI, and some trust both, and I asked why or why not. There
wasn't really much of a "debate" but rather an interesting discussion of
what the historical reasons have been for this, and it came up that some
distros just missed the introduction of the bootloader Kconfig knob,
while another didn't want to enable it until there was a boot time
switch to turn it off for more concerned users (which has since been
added). The result of the rather uneventful discussion is that every
major Linux distro enables these two options by default.

While I didn't have really too strong of an opinion going into this
thread -- and I mostly wanted to learn what the distros' thinking was
one way or another -- ultimately I think their choice was a decent
enough one for a default option (which can be disabled at boot time).
I'll try to summarize the pros and cons:

Pros:

- The RNG machinery gets initialized super quickly, and there's no
  messing around with subsequent blocking behavior.

- The bootloader mechanism is used by kexec in order for the prior
  kernel to initialize the RNG of the next kernel, which increases
  the entropy available to early boot daemons of the next kernel.

- Previous objections related to backdoors centered around
  Dual_EC_DRBG-like kleptographic systems, in which observing some
  amount of the output stream enables an adversary holding the right key
  to determine the entire output stream.

  This used to be a partially justified concern, because RDRAND output
  was mixed into the output stream in varying ways, some of which may
  have lacked pre-image resistance (e.g. XOR or an LFSR).

  But this is no longer the case. Now, all usage of RDRAND and
  bootloader seeds go through a cryptographic hash function. This means
  that the CPU would have to compute a hash pre-image, which is not
  considered to be feasible (otherwise the hash function would be
  terribly broken).

- More generally, if the CPU is backdoored, the RNG is probably not the
  realistic vector of choice for an attacker.

- These CPU or bootloader seeds are far from being the only source of
  entropy. Rather, there is generally a pretty huge amount of entropy,
  not all of which is credited, especially on CPUs that support
  instructions like RDRAND. In other words, assuming RDRAND outputs all
  zeros, an attacker would *still* have to accurately model every single
  other entropy source also in use.

- The RNG now reseeds itself quite rapidly during boot, starting at 2
  seconds, then 4, then 8, then 16, and so forth, so that other sources
  of entropy get used without much delay.

- Paranoid users can set random.trust_{cpu,bootloader}=no in the kernel
  command line, and paranoid system builders can set the Kconfig options
  to N, so there's no reduction or restriction of optionality.

- It's a practical default.

- All the distros have it set this way. Microsoft and Apple trust it
  too. Bandwagon.

Cons:

- RDRAND *could* still be backdoored with something like a fixed key or
  limited space serial number seed or another indexable scheme like
  that. (However, it's hard to imagine threat models where the CPU is
  backdoored like this, yet people are still okay making *any*
  computations with it or connecting it to networks, etc.)

- RDRAND *could* be defective, rather than backdoored, and produce
  garbage that is in one way or another insufficient for crypto.

- Suggesting a *reduction* in paranoia, as this commit effectively does,
  may cause some to question my personal integrity as a "security
  person".

- Bootloader seeds and RDRAND are generally very difficult if not all
  together impossible to audit.

Keep in mind that this doesn't actually change any behavior. This
is just a change in the default Kconfig value. The distros already are
shipping kernels that set things this way.

Ard made an additional argument in [1]:

    We're at the mercy of firmware and micro-architecture anyway, given
    that we are also relying on it to ensure that every instruction in
    the kernel's executable image has been faithfully copied to memory,
    and that the CPU implements those instructions as documented. So I
    don't think firmware or ISA bugs related to RNGs deserve special
    treatment - if they are broken, we should quirk around them like we
    usually do. So enabling these by default is a step in the right
    direction IMHO.

In [2], Phil pointed out that having this disabled masked a bug that CI
otherwise would have caught:

    A clean 5.15.45 boots cleanly, whereas a downstream kernel shows the
    static key warning (but it does go on to boot). The significant
    difference is that our defconfigs set CONFIG_RANDOM_TRUST_BOOTLOADER=y
    defining that on top of multi_v7_defconfig demonstrates the issue on
    a clean 5.15.45. Conversely, not setting that option in a
    downstream kernel build avoids the warning

[1] https://lore.kernel.org/lkml/CAMj1kXGi+ieviFjXv9zQBSaGyyzeGW_VpMpTLJK8PJb2QHEQ-w@mail.gmail.com/
[2] https://lore.kernel.org/lkml/c47c42e3-1d56-5859-a6ad-976a1a3381c6@raspberrypi.com/

Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/Kconfig | 54 +++++++++++++++++++++++++++-----------------
 1 file changed, 33 insertions(+), 21 deletions(-)

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 3e2703a49632..b4e65d1ede26 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -471,29 +471,41 @@ config ADI
 	  and SSM (Silicon Secured Memory).  Intended consumers of this
 	  driver include crash and makedumpfile.
 
-endmenu
-
 config RANDOM_TRUST_CPU
-	bool "Trust the CPU manufacturer to initialize Linux's CRNG"
+	bool "Initialize RNG using CPU RNG instructions"
+	default y
 	depends on ARCH_RANDOM
-	default n
 	help
-	Assume that CPU manufacturer (e.g., Intel or AMD for RDSEED or
-	RDRAND, IBM for the S390 and Power PC architectures) is trustworthy
-	for the purposes of initializing Linux's CRNG.  Since this is not
-	something that can be independently audited, this amounts to trusting
-	that CPU manufacturer (perhaps with the insistence or mandate
-	of a Nation State's intelligence or law enforcement agencies)
-	has not installed a hidden back door to compromise the CPU's
-	random number generation facilities. This can also be configured
-	at boot with "random.trust_cpu=on/off".
+	  Initialize the RNG using random numbers supplied by the CPU's
+	  RNG instructions (e.g. RDRAND), if supported and available. These
+	  random numbers are never used directly, but are rather hashed into
+	  the main input pool, and this happens regardless of whether or not
+	  this option is enabled. Instead, this option controls whether the
+	  they are credited and hence can initialize the RNG. Additionally,
+	  other sources of randomness are always used, regardless of this
+	  setting.  Enabling this implies trusting that the CPU can supply high
+	  quality and non-backdoored random numbers.
+
+	  Say Y here unless you have reason to mistrust your CPU or believe
+	  its RNG facilities may be faulty. This may also be configured at
+	  boot time with "random.trust_cpu=on/off".
 
 config RANDOM_TRUST_BOOTLOADER
-	bool "Trust the bootloader to initialize Linux's CRNG"
-	help
-	Some bootloaders can provide entropy to increase the kernel's initial
-	device randomness. Say Y here to assume the entropy provided by the
-	booloader is trustworthy so it will be added to the kernel's entropy
-	pool. Otherwise, say N here so it will be regarded as device input that
-	only mixes the entropy pool. This can also be configured at boot with
-	"random.trust_bootloader=on/off".
+	bool "Initialize RNG using bootloader-supplied seed"
+	default y
+	help
+	  Initialize the RNG using a seed supplied by the bootloader or boot
+	  environment (e.g. EFI or a bootloader-generated device tree). This
+	  seed is not used directly, but is rather hashed into the main input
+	  pool, and this happens regardless of whether or not this option is
+	  enabled. Instead, this option controls whether the seed is credited
+	  and hence can initialize the RNG. Additionally, other sources of
+	  randomness are always used, regardless of this setting. Enabling
+	  this implies trusting that the bootloader can supply high quality and
+	  non-backdoored seeds.
+
+	  Say Y here unless you have reason to mistrust your bootloader or
+	  believe its RNG facilities may be faulty. This may also be configured
+	  at boot time with "random.trust_bootloader=on/off".
+
+endmenu
-- 
2.35.1

[PATCH 5.10 35/84] pNFS: Dont keep retrying if the server replied NFS4ERR_LAYOUTUNAVAILABLE

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit fe44fb23d6ccde4c914c44ef74ab8d9d9ba02bea ]

If the server tells us that a pNFS layout is not available for a
specific file, then we should not keep pounding it with further
layoutget requests.

Fixes: 183d9e7b112a ("pnfs: rework LAYOUTGET retry handling")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/pnfs.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c
index 8c0803d98008..69bb50d0ee3f 100644
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -2155,6 +2155,12 @@ pnfs_update_layout(struct inode *ino,
 		case -ERECALLCONFLICT:
 		case -EAGAIN:
 			break;
+		case -ENODATA:
+			/* The server returned NFS4ERR_LAYOUTUNAVAILABLE */
+			pnfs_layout_set_fail_bit(
+				lo, pnfs_iomode_to_fail_bit(iomode));
+			lseg = NULL;
+			goto out_put_layout_hdr;
 		default:
 			if (!nfs_error_is_fatal(PTR_ERR(lseg))) {
 				pnfs_layout_clear_fail_bit(lo, pnfs_iomode_to_fail_bit(iomode));
-- 
2.35.1

[PATCH 5.10 36/84] pNFS: Avoid a live lock condition in pnfs_update_layout()

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit 880265c77ac415090090d1fe72a188fee71cb458 ]

If we're about to send the first layoutget for an empty layout, we want
to make sure that we drain out the existing pending layoutget calls
first. The reason is that these layouts may have been already implicitly
returned to the server by a recall to which the client gave a
NFS4ERR_NOMATCHING_LAYOUT response.

The problem is that wait_var_event_killable() could in principle see the
plh_outstanding count go back to '1' when the first process to wake up
starts sending a new layoutget. If it fails to get a layout, then this
loop can continue ad infinitum...

Fixes: 0b77f97a7e42 ("NFSv4/pnfs: Fix layoutget behaviour after invalidation")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/callback_proc.c |  1 +
 fs/nfs/pnfs.c          | 15 +++++++++------
 fs/nfs/pnfs.h          |  1 +
 3 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c
index a5209643ac36..bfdd21224073 100644
--- a/fs/nfs/callback_proc.c
+++ b/fs/nfs/callback_proc.c
@@ -283,6 +283,7 @@ static u32 initiate_file_draining(struct nfs_client *clp,
 		rv = NFS4_OK;
 		break;
 	case -ENOENT:
+		set_bit(NFS_LAYOUT_DRAIN, &lo->plh_flags);
 		/* Embrace your forgetfulness! */
 		rv = NFS4ERR_NOMATCHING_LAYOUT;
 
diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c
index 69bb50d0ee3f..21436721745b 100644
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -469,6 +469,7 @@ pnfs_mark_layout_stateid_invalid(struct pnfs_layout_hdr *lo,
 		pnfs_clear_lseg_state(lseg, lseg_list);
 	pnfs_clear_layoutreturn_info(lo);
 	pnfs_free_returned_lsegs(lo, lseg_list, &range, 0);
+	set_bit(NFS_LAYOUT_DRAIN, &lo->plh_flags);
 	if (test_bit(NFS_LAYOUT_RETURN, &lo->plh_flags) &&
 	    !test_and_set_bit(NFS_LAYOUT_RETURN_LOCK, &lo->plh_flags))
 		pnfs_clear_layoutreturn_waitbit(lo);
@@ -1923,8 +1924,9 @@ static void nfs_layoutget_begin(struct pnfs_layout_hdr *lo)
 
 static void nfs_layoutget_end(struct pnfs_layout_hdr *lo)
 {
-	if (atomic_dec_and_test(&lo->plh_outstanding))
-		wake_up_var(&lo->plh_outstanding);
+	if (atomic_dec_and_test(&lo->plh_outstanding) &&
+	    test_and_clear_bit(NFS_LAYOUT_DRAIN, &lo->plh_flags))
+		wake_up_bit(&lo->plh_flags, NFS_LAYOUT_DRAIN);
 }
 
 static bool pnfs_is_first_layoutget(struct pnfs_layout_hdr *lo)
@@ -2031,11 +2033,11 @@ pnfs_update_layout(struct inode *ino,
 	 * If the layout segment list is empty, but there are outstanding
 	 * layoutget calls, then they might be subject to a layoutrecall.
 	 */
-	if ((list_empty(&lo->plh_segs) || !pnfs_layout_is_valid(lo)) &&
+	if (test_bit(NFS_LAYOUT_DRAIN, &lo->plh_flags) &&
 	    atomic_read(&lo->plh_outstanding) != 0) {
 		spin_unlock(&ino->i_lock);
-		lseg = ERR_PTR(wait_var_event_killable(&lo->plh_outstanding,
-					!atomic_read(&lo->plh_outstanding)));
+		lseg = ERR_PTR(wait_on_bit(&lo->plh_flags, NFS_LAYOUT_DRAIN,
+					   TASK_KILLABLE));
 		if (IS_ERR(lseg))
 			goto out_put_layout_hdr;
 		pnfs_put_layout_hdr(lo);
@@ -2414,7 +2416,8 @@ pnfs_layout_process(struct nfs4_layoutget *lgp)
 		goto out_forget;
 	}
 
-	if (!pnfs_layout_is_valid(lo) && !pnfs_is_first_layoutget(lo))
+	if (test_bit(NFS_LAYOUT_DRAIN, &lo->plh_flags) &&
+	    !pnfs_is_first_layoutget(lo))
 		goto out_forget;
 
 	if (nfs4_stateid_match_other(&lo->plh_stateid, &res->stateid)) {
diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h
index 11d9ed9addc0..a7cf84a6673b 100644
--- a/fs/nfs/pnfs.h
+++ b/fs/nfs/pnfs.h
@@ -107,6 +107,7 @@ enum {
 	NFS_LAYOUT_FIRST_LAYOUTGET,	/* Serialize first layoutget */
 	NFS_LAYOUT_INODE_FREEING,	/* The inode is being freed */
 	NFS_LAYOUT_HASHED,		/* The layout visible */
+	NFS_LAYOUT_DRAIN,
 };
 
 enum layoutdriver_policy_flags {
-- 
2.35.1

[PATCH 5.10 37/84] clocksource: hyper-v: unexport __init-annotated hv_init_clocksource()

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit 245b993d8f6c4e25f19191edfbd8080b645e12b1 ]

EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.

modpost used to detect it, but it has been broken for a decade.

Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.

There are two ways to fix it:

  - Remove __init
  - Remove EXPORT_SYMBOL

I chose the latter for this case because the only in-tree call-site,
arch/x86/kernel/cpu/mshyperv.c is never compiled as modular.
(CONFIG_HYPERVISOR_GUEST is boolean)

Fixes: dd2cb348613b ("clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220606050238.4162200-1-masahiroy@kernel.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/hyperv_timer.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/clocksource/hyperv_timer.c b/drivers/clocksource/hyperv_timer.c
index ba04cb381cd3..7c617d8dff3f 100644
--- a/drivers/clocksource/hyperv_timer.c
+++ b/drivers/clocksource/hyperv_timer.c
@@ -472,4 +472,3 @@ void __init hv_init_clocksource(void)
 	hv_sched_clock_offset = hv_read_reference_counter();
 	hv_setup_sched_clock(read_hv_sched_clock_msr);
 }
-EXPORT_SYMBOL_GPL(hv_init_clocksource);
-- 
2.35.1

[PATCH 5.10 38/84] i40e: Fix adding ADQ filter to TC0

[Greg Kroah-Hartman]

From: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>

[ Upstream commit c3238d36c3a2be0a29a9d848d6c51e1b14be6692 ]

Procedure of configure tc flower filters erroneously allows to create
filters on TC0 where unfiltered packets are also directed by default.
Issue was caused by insufficient checks of hw_tc parameter specifying
the hardware traffic class to pass matching packets to.

Fix checking hw_tc parameter which blocks creation of filters on TC0.

Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 4a18a7c7dd4c..614f3e995100 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -8163,6 +8163,11 @@ static int i40e_configure_clsflower(struct i40e_vsi *vsi,
 		return -EOPNOTSUPP;
 	}
 
+	if (!tc) {
+		dev_err(&pf->pdev->dev, "Unable to add filter because of invalid destination");
+		return -EINVAL;
+	}
+
 	if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state) ||
 	    test_bit(__I40E_RESET_INTR_RECEIVED, pf->state))
 		return -EBUSY;
-- 
2.35.1

[PATCH 5.10 39/84] i40e: Fix calculating the number of queue pairs

[Greg Kroah-Hartman]

From: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>

[ Upstream commit 0bb050670ac90a167ecfa3f9590f92966c9a3677 ]

If ADQ is enabled for a VF, then actual number of queue pair
is a number of currently available traffic classes for this VF.

Without this change the configuration of the Rx/Tx queues
fails with error.

Fixes: d29e0d233e0d ("i40e: missing input validation on VF message handling by the PF")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 9181e007e039..1947c5a77550 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -2228,7 +2228,7 @@ static int i40e_vc_config_queues_msg(struct i40e_vf *vf, u8 *msg)
 	}
 
 	if (vf->adq_enabled) {
-		for (i = 0; i < I40E_MAX_VF_VSI; i++)
+		for (i = 0; i < vf->num_tc; i++)
 			num_qps_all += vf->ch[i].num_qps;
 		if (num_qps_all != qci->num_queue_pairs) {
 			aq_ret = I40E_ERR_PARAM;
-- 
2.35.1

[PATCH 5.10 40/84] i40e: Fix call trace in setup_tx_descriptors

[Greg Kroah-Hartman]

From: Aleksandr Loktionov <aleksandr.loktionov@intel.com>

[ Upstream commit fd5855e6b1358e816710afee68a1d2bc685176ca ]

After PF reset and ethtool -t there was call trace in dmesg
sometimes leading to panic. When there was some time, around 5
seconds, between reset and test there were no errors.

Problem was that pf reset calls i40e_vsi_close in prep_for_reset
and ethtool -t calls i40e_vsi_close in diag_test. If there was not
enough time between those commands the second i40e_vsi_close starts
before previous i40e_vsi_close was done which leads to crash.

Add check to diag_test if pf is in reset and don't start offline
tests if it is true.
Add netif_info("testing failed") into unhappy path of i40e_diag_test()

Fixes: e17bc411aea8 ("i40e: Disable offline diagnostics if VFs are enabled")
Fixes: 510efb2682b3 ("i40e: Fix ethtool offline diagnostic with netqueues")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/intel/i40e/i40e_ethtool.c    | 25 +++++++++++++------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index a2bdb2906519..63054061966e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -2582,15 +2582,16 @@ static void i40e_diag_test(struct net_device *netdev,
 
 		set_bit(__I40E_TESTING, pf->state);
 
+		if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state) ||
+		    test_bit(__I40E_RESET_INTR_RECEIVED, pf->state)) {
+			dev_warn(&pf->pdev->dev,
+				 "Cannot start offline testing when PF is in reset state.\n");
+			goto skip_ol_tests;
+		}
+
 		if (i40e_active_vfs(pf) || i40e_active_vmdqs(pf)) {
 			dev_warn(&pf->pdev->dev,
 				 "Please take active VFs and Netqueues offline and restart the adapter before running NIC diagnostics\n");
-			data[I40E_ETH_TEST_REG]		= 1;
-			data[I40E_ETH_TEST_EEPROM]	= 1;
-			data[I40E_ETH_TEST_INTR]	= 1;
-			data[I40E_ETH_TEST_LINK]	= 1;
-			eth_test->flags |= ETH_TEST_FL_FAILED;
-			clear_bit(__I40E_TESTING, pf->state);
 			goto skip_ol_tests;
 		}
 
@@ -2637,9 +2638,17 @@ static void i40e_diag_test(struct net_device *netdev,
 		data[I40E_ETH_TEST_INTR] = 0;
 	}
 
-skip_ol_tests:
-
 	netif_info(pf, drv, netdev, "testing finished\n");
+	return;
+
+skip_ol_tests:
+	data[I40E_ETH_TEST_REG]		= 1;
+	data[I40E_ETH_TEST_EEPROM]	= 1;
+	data[I40E_ETH_TEST_INTR]	= 1;
+	data[I40E_ETH_TEST_LINK]	= 1;
+	eth_test->flags |= ETH_TEST_FL_FAILED;
+	clear_bit(__I40E_TESTING, pf->state);
+	netif_info(pf, drv, netdev, "testing failed\n");
 }
 
 static void i40e_get_wol(struct net_device *netdev,
-- 
2.35.1

[PATCH 5.10 41/84] Drivers: hv: vmbus: Release cpu lock in error case

[Greg Kroah-Hartman]

From: Saurabh Sengar <ssengar@linux.microsoft.com>

[ Upstream commit 656c5ba50b7172a0ea25dc1b37606bd51d01fe8d ]

In case of invalid sub channel, release cpu lock before returning.

Fixes: a949e86c0d780 ("Drivers: hv: vmbus: Resolve race between init_vp_index() and CPU hotplug")
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1654794996-13244-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hv/channel_mgmt.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
index 5dbb949b1afd..10188b1a6a08 100644
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -606,6 +606,7 @@ static void vmbus_process_offer(struct vmbus_channel *newchannel)
 		 */
 		if (newchannel->offermsg.offer.sub_channel_index == 0) {
 			mutex_unlock(&vmbus_connection.channel_mutex);
+			cpus_read_unlock();
 			/*
 			 * Don't call free_channel(), because newchannel->kobj
 			 * is not initialized yet.
-- 
2.35.1

[PATCH 5.10 42/84] tty: goldfish: Fix free_irq() on remove

[Greg Kroah-Hartman]

From: Vincent Whitchurch <vincent.whitchurch@axis.com>

[ Upstream commit 499e13aac6c762e1e828172b0f0f5275651d6512 ]

Pass the correct dev_id to free_irq() to fix this splat when the driver
is unbound:

 WARNING: CPU: 0 PID: 30 at kernel/irq/manage.c:1895 free_irq
 Trying to free already-free IRQ 65
 Call Trace:
  warn_slowpath_fmt
  free_irq
  goldfish_tty_remove
  platform_remove
  device_remove
  device_release_driver_internal
  device_driver_detach
  unbind_store
  drv_attr_store
  ...

Fixes: 465893e18878e119 ("tty: goldfish: support platform_device with id -1")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220609141704.1080024-1-vincent.whitchurch@axis.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/goldfish.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c
index abc84d84f638..9180ca5e4dcd 100644
--- a/drivers/tty/goldfish.c
+++ b/drivers/tty/goldfish.c
@@ -428,7 +428,7 @@ static int goldfish_tty_remove(struct platform_device *pdev)
 	tty_unregister_device(goldfish_tty_driver, qtty->console.index);
 	iounmap(qtty->base);
 	qtty->base = NULL;
-	free_irq(qtty->irq, pdev);
+	free_irq(qtty->irq, qtty);
 	tty_port_destroy(&qtty->port);
 	goldfish_tty_current_line_count--;
 	if (goldfish_tty_current_line_count == 0)
-- 
2.35.1

[PATCH 5.10 43/84] misc: atmel-ssc: Fix IRQ check in ssc_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 1c245358ce0b13669f6d1625f7a4e05c41f28980 ]

platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:

    int irq = platform_get_irq(pdev, 0);
    if (irq < 0)
        return irq;

Fix the check of return value to catch errors correctly.

Fixes: eb1f2930609b ("Driver for the Atmel on-chip SSC on AT32AP and AT91")
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220601123026.7119-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/atmel-ssc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
index d6cd5537126c..69f9b0336410 100644
--- a/drivers/misc/atmel-ssc.c
+++ b/drivers/misc/atmel-ssc.c
@@ -232,9 +232,9 @@ static int ssc_probe(struct platform_device *pdev)
 	clk_disable_unprepare(ssc->clk);
 
 	ssc->irq = platform_get_irq(pdev, 0);
-	if (!ssc->irq) {
+	if (ssc->irq < 0) {
 		dev_dbg(&pdev->dev, "could not get irq\n");
-		return -ENXIO;
+		return ssc->irq;
 	}
 
 	mutex_lock(&user_lock);
-- 
2.35.1

[PATCH 5.10 44/84] drm/i915/reset: Fix error_state_read ptr + offset use

[Greg Kroah-Hartman]

From: Alan Previn <alan.previn.teres.alexis@intel.com>

[ Upstream commit c9b576d0c7bf55aeae1a736da7974fa202c4394d ]

Fix our pointer offset usage in error_state_read
when there is no i915_gpu_coredump but buf offset
is non-zero.

This fixes a kernel page fault can happen when
multiple tests are running concurrently in a loop
and one is producing engine resets and consuming
the i915 error_state dump while the other is
forcing full GT resets. (takes a while to trigger).

The dmesg call trace:

[ 5590.803000] BUG: unable to handle page fault for address:
               ffffffffa0b0e000
[ 5590.803009] #PF: supervisor read access in kernel mode
[ 5590.803013] #PF: error_code(0x0000) - not-present page
[ 5590.803016] PGD 5814067 P4D 5814067 PUD 5815063 PMD 109de4067
               PTE 0
[ 5590.803022] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 5590.803026] CPU: 5 PID: 13656 Comm: i915_hangman Tainted: G U
                    5.17.0-rc5-ups69-guc-err-capt-rev6+ #136
[ 5590.803033] Hardware name: Intel Corporation Alder Lake Client
                    Platform/AlderLake-M LP4x RVP, BIOS ADLPFWI1.R00.
                    3031.A02.2201171222	01/17/2022
[ 5590.803039] RIP: 0010:memcpy_erms+0x6/0x10
[ 5590.803045] Code: fe ff ff cc eb 1e 0f 1f 00 48 89 f8 48 89 d1
                     48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3
                     66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4
                     c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20
                     72 7e 40 38 fe
[ 5590.803054] RSP: 0018:ffffc90003a8fdf0 EFLAGS: 00010282
[ 5590.803057] RAX: ffff888107ee9000 RBX: ffff888108cb1a00
               RCX: 0000000000000f8f
[ 5590.803061] RDX: 0000000000001000 RSI: ffffffffa0b0e000
               RDI: ffff888107ee9071
[ 5590.803065] RBP: 0000000000000000 R08: 0000000000000001
               R09: 0000000000000001
[ 5590.803069] R10: 0000000000000001 R11: 0000000000000002
               R12: 0000000000000019
[ 5590.803073] R13: 0000000000174fff R14: 0000000000001000
               R15: ffff888107ee9000
[ 5590.803077] FS: 00007f62a99bee80(0000) GS:ffff88849f880000(0000)
               knlGS:0000000000000000
[ 5590.803082] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5590.803085] CR2: ffffffffa0b0e000 CR3: 000000010a1a8004
               CR4: 0000000000770ee0
[ 5590.803089] PKRU: 55555554
[ 5590.803091] Call Trace:
[ 5590.803093] <TASK>
[ 5590.803096] error_state_read+0xa1/0xd0 [i915]
[ 5590.803175] kernfs_fop_read_iter+0xb2/0x1b0
[ 5590.803180] new_sync_read+0x116/0x1a0
[ 5590.803185] vfs_read+0x114/0x1b0
[ 5590.803189] ksys_read+0x63/0xe0
[ 5590.803193] do_syscall_64+0x38/0xc0
[ 5590.803197] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 5590.803201] RIP: 0033:0x7f62aaea5912
[ 5590.803204] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 5a b9 0c 00 e8 05
                     19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25
                     18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff
                     ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24
[ 5590.803213] RSP: 002b:00007fff5b659ae8 EFLAGS: 00000246
               ORIG_RAX: 0000000000000000
[ 5590.803218] RAX: ffffffffffffffda RBX: 0000000000100000
               RCX: 00007f62aaea5912
[ 5590.803221] RDX: 000000000008b000 RSI: 00007f62a8c4000f
               RDI: 0000000000000006
[ 5590.803225] RBP: 00007f62a8bcb00f R08: 0000000000200010
               R09: 0000000000101000
[ 5590.803229] R10: 0000000000000001 R11: 0000000000000246
               R12: 0000000000000006
[ 5590.803233] R13: 0000000000075000 R14: 00007f62a8acb010
               R15: 0000000000200000
[ 5590.803238] </TASK>
[ 5590.803240] Modules linked in: i915 ttm drm_buddy drm_dp_helper
                        drm_kms_helper syscopyarea sysfillrect sysimgblt
                        fb_sys_fops prime_numbers nfnetlink br_netfilter
                        overlay mei_pxp mei_hdcp x86_pkg_temp_thermal
                        coretemp kvm_intel snd_hda_codec_hdmi snd_hda_intel
                        snd_intel_dspcfg snd_hda_codec snd_hwdep
                        snd_hda_core snd_pcm mei_me mei fuse ip_tables
                        x_tables crct10dif_pclmul e1000e crc32_pclmul ptp
                        i2c_i801 ghash_clmulni_intel i2c_smbus pps_core
                        [last unloa ded: ttm]
[ 5590.803277] CR2: ffffffffa0b0e000
[ 5590.803280] ---[ end trace 0000000000000000 ]---

Fixes: 0e39037b3165 ("drm/i915: Cache the error string")
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311004311.514198-2-alan.previn.teres.alexis@intel.com
(cherry picked from commit 3304033a1e69cd81a2044b4422f0d7e593afb4e6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/i915_sysfs.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_sysfs.c b/drivers/gpu/drm/i915/i915_sysfs.c
index 45d32ef42787..ac40a95374d3 100644
--- a/drivers/gpu/drm/i915/i915_sysfs.c
+++ b/drivers/gpu/drm/i915/i915_sysfs.c
@@ -500,7 +500,14 @@ static ssize_t error_state_read(struct file *filp, struct kobject *kobj,
 	struct device *kdev = kobj_to_dev(kobj);
 	struct drm_i915_private *i915 = kdev_minor_to_i915(kdev);
 	struct i915_gpu_coredump *gpu;
-	ssize_t ret;
+	ssize_t ret = 0;
+
+	/*
+	 * FIXME: Concurrent clients triggering resets and reading + clearing
+	 * dumps can cause inconsistent sysfs reads when a user calls in with a
+	 * non-zero offset to complete a prior partial read but the
+	 * gpu_coredump has been cleared or replaced.
+	 */
 
 	gpu = i915_first_error_state(i915);
 	if (IS_ERR(gpu)) {
@@ -512,8 +519,10 @@ static ssize_t error_state_read(struct file *filp, struct kobject *kobj,
 		const char *str = "No error state collected\n";
 		size_t len = strlen(str);
 
-		ret = min_t(size_t, count, len - off);
-		memcpy(buf, str + off, ret);
+		if (off < len) {
+			ret = min_t(size_t, count, len - off);
+			memcpy(buf, str + off, ret);
+		}
 	}
 
 	return ret;
-- 
2.35.1

[PATCH 5.10 45/84] nvme: use sysfs_emit instead of sprintf

[Greg Kroah-Hartman]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit bff4bcf3cfc1595e0ef2aeb774b2403c88de1486 ]

sysfs_emit is the recommended API to use for formatting strings to be
returned to user space. It is equivalent to scnprintf and aware of the
PAGE_SIZE buffer size.

Suggested-by: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c      | 40 +++++++++++++++++------------------
 drivers/nvme/host/multipath.c |  8 +++----
 2 files changed, 24 insertions(+), 24 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index d301f0280ff6..c8c8c567a000 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2813,8 +2813,8 @@ static ssize_t subsys_##field##_show(struct device *dev,		\
 {									\
 	struct nvme_subsystem *subsys =					\
 		container_of(dev, struct nvme_subsystem, dev);		\
-	return sprintf(buf, "%.*s\n",					\
-		       (int)sizeof(subsys->field), subsys->field);	\
+	return sysfs_emit(buf, "%.*s\n",				\
+			   (int)sizeof(subsys->field), subsys->field);	\
 }									\
 static SUBSYS_ATTR_RO(field, S_IRUGO, subsys_##field##_show);
 
@@ -3335,13 +3335,13 @@ static ssize_t wwid_show(struct device *dev, struct device_attribute *attr,
 	int model_len = sizeof(subsys->model);
 
 	if (!uuid_is_null(&ids->uuid))
-		return sprintf(buf, "uuid.%pU\n", &ids->uuid);
+		return sysfs_emit(buf, "uuid.%pU\n", &ids->uuid);
 
 	if (memchr_inv(ids->nguid, 0, sizeof(ids->nguid)))
-		return sprintf(buf, "eui.%16phN\n", ids->nguid);
+		return sysfs_emit(buf, "eui.%16phN\n", ids->nguid);
 
 	if (memchr_inv(ids->eui64, 0, sizeof(ids->eui64)))
-		return sprintf(buf, "eui.%8phN\n", ids->eui64);
+		return sysfs_emit(buf, "eui.%8phN\n", ids->eui64);
 
 	while (serial_len > 0 && (subsys->serial[serial_len - 1] == ' ' ||
 				  subsys->serial[serial_len - 1] == '\0'))
@@ -3350,7 +3350,7 @@ static ssize_t wwid_show(struct device *dev, struct device_attribute *attr,
 				 subsys->model[model_len - 1] == '\0'))
 		model_len--;
 
-	return sprintf(buf, "nvme.%04x-%*phN-%*phN-%08x\n", subsys->vendor_id,
+	return sysfs_emit(buf, "nvme.%04x-%*phN-%*phN-%08x\n", subsys->vendor_id,
 		serial_len, subsys->serial, model_len, subsys->model,
 		head->ns_id);
 }
@@ -3359,7 +3359,7 @@ static DEVICE_ATTR_RO(wwid);
 static ssize_t nguid_show(struct device *dev, struct device_attribute *attr,
 		char *buf)
 {
-	return sprintf(buf, "%pU\n", dev_to_ns_head(dev)->ids.nguid);
+	return sysfs_emit(buf, "%pU\n", dev_to_ns_head(dev)->ids.nguid);
 }
 static DEVICE_ATTR_RO(nguid);
 
@@ -3374,23 +3374,23 @@ static ssize_t uuid_show(struct device *dev, struct device_attribute *attr,
 	if (uuid_is_null(&ids->uuid)) {
 		printk_ratelimited(KERN_WARNING
 				   "No UUID available providing old NGUID\n");
-		return sprintf(buf, "%pU\n", ids->nguid);
+		return sysfs_emit(buf, "%pU\n", ids->nguid);
 	}
-	return sprintf(buf, "%pU\n", &ids->uuid);
+	return sysfs_emit(buf, "%pU\n", &ids->uuid);
 }
 static DEVICE_ATTR_RO(uuid);
 
 static ssize_t eui_show(struct device *dev, struct device_attribute *attr,
 		char *buf)
 {
-	return sprintf(buf, "%8ph\n", dev_to_ns_head(dev)->ids.eui64);
+	return sysfs_emit(buf, "%8ph\n", dev_to_ns_head(dev)->ids.eui64);
 }
 static DEVICE_ATTR_RO(eui);
 
 static ssize_t nsid_show(struct device *dev, struct device_attribute *attr,
 		char *buf)
 {
-	return sprintf(buf, "%d\n", dev_to_ns_head(dev)->ns_id);
+	return sysfs_emit(buf, "%d\n", dev_to_ns_head(dev)->ns_id);
 }
 static DEVICE_ATTR_RO(nsid);
 
@@ -3455,7 +3455,7 @@ static ssize_t  field##_show(struct device *dev,				\
 			    struct device_attribute *attr, char *buf)		\
 {										\
         struct nvme_ctrl *ctrl = dev_get_drvdata(dev);				\
-        return sprintf(buf, "%.*s\n",						\
+        return sysfs_emit(buf, "%.*s\n",					\
 		(int)sizeof(ctrl->subsys->field), ctrl->subsys->field);		\
 }										\
 static DEVICE_ATTR(field, S_IRUGO, field##_show, NULL);
@@ -3469,7 +3469,7 @@ static ssize_t  field##_show(struct device *dev,				\
 			    struct device_attribute *attr, char *buf)		\
 {										\
         struct nvme_ctrl *ctrl = dev_get_drvdata(dev);				\
-        return sprintf(buf, "%d\n", ctrl->field);	\
+        return sysfs_emit(buf, "%d\n", ctrl->field);				\
 }										\
 static DEVICE_ATTR(field, S_IRUGO, field##_show, NULL);
 
@@ -3517,9 +3517,9 @@ static ssize_t nvme_sysfs_show_state(struct device *dev,
 
 	if ((unsigned)ctrl->state < ARRAY_SIZE(state_name) &&
 	    state_name[ctrl->state])
-		return sprintf(buf, "%s\n", state_name[ctrl->state]);
+		return sysfs_emit(buf, "%s\n", state_name[ctrl->state]);
 
-	return sprintf(buf, "unknown state\n");
+	return sysfs_emit(buf, "unknown state\n");
 }
 
 static DEVICE_ATTR(state, S_IRUGO, nvme_sysfs_show_state, NULL);
@@ -3571,9 +3571,9 @@ static ssize_t nvme_ctrl_loss_tmo_show(struct device *dev,
 	struct nvmf_ctrl_options *opts = ctrl->opts;
 
 	if (ctrl->opts->max_reconnects == -1)
-		return sprintf(buf, "off\n");
-	return sprintf(buf, "%d\n",
-			opts->max_reconnects * opts->reconnect_delay);
+		return sysfs_emit(buf, "off\n");
+	return sysfs_emit(buf, "%d\n",
+			  opts->max_reconnects * opts->reconnect_delay);
 }
 
 static ssize_t nvme_ctrl_loss_tmo_store(struct device *dev,
@@ -3603,8 +3603,8 @@ static ssize_t nvme_ctrl_reconnect_delay_show(struct device *dev,
 	struct nvme_ctrl *ctrl = dev_get_drvdata(dev);
 
 	if (ctrl->opts->reconnect_delay == -1)
-		return sprintf(buf, "off\n");
-	return sprintf(buf, "%d\n", ctrl->opts->reconnect_delay);
+		return sysfs_emit(buf, "off\n");
+	return sysfs_emit(buf, "%d\n", ctrl->opts->reconnect_delay);
 }
 
 static ssize_t nvme_ctrl_reconnect_delay_store(struct device *dev,
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index a9e15c8f907b..379d6818a063 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -624,8 +624,8 @@ static ssize_t nvme_subsys_iopolicy_show(struct device *dev,
 	struct nvme_subsystem *subsys =
 		container_of(dev, struct nvme_subsystem, dev);
 
-	return sprintf(buf, "%s\n",
-			nvme_iopolicy_names[READ_ONCE(subsys->iopolicy)]);
+	return sysfs_emit(buf, "%s\n",
+			  nvme_iopolicy_names[READ_ONCE(subsys->iopolicy)]);
 }
 
 static ssize_t nvme_subsys_iopolicy_store(struct device *dev,
@@ -650,7 +650,7 @@ SUBSYS_ATTR_RW(iopolicy, S_IRUGO | S_IWUSR,
 static ssize_t ana_grpid_show(struct device *dev, struct device_attribute *attr,
 		char *buf)
 {
-	return sprintf(buf, "%d\n", nvme_get_ns_from_dev(dev)->ana_grpid);
+	return sysfs_emit(buf, "%d\n", nvme_get_ns_from_dev(dev)->ana_grpid);
 }
 DEVICE_ATTR_RO(ana_grpid);
 
@@ -659,7 +659,7 @@ static ssize_t ana_state_show(struct device *dev, struct device_attribute *attr,
 {
 	struct nvme_ns *ns = nvme_get_ns_from_dev(dev);
 
-	return sprintf(buf, "%s\n", nvme_ana_state_names[ns->ana_state]);
+	return sysfs_emit(buf, "%s\n", nvme_ana_state_names[ns->ana_state]);
 }
 DEVICE_ATTR_RO(ana_state);
 
-- 
2.35.1

[PATCH 5.10 46/84] nvme: add device name to warning in uuid_show()

[Greg Kroah-Hartman]

From: Thomas Weißschuh <linux@weissschuh.net>

[ Upstream commit 1fc766b5c08417248e0008bca14c3572ac0f1c26 ]

This provides more context to users.

Old message:

[   00.000000] No UUID available providing old NGUID

New message:

[   00.000000] block nvme0n1: No UUID available providing old NGUID

Fixes: d934f9848a77 ("nvme: provide UUID value to userspace")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index c8c8c567a000..0aa68da51ed7 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -3372,8 +3372,8 @@ static ssize_t uuid_show(struct device *dev, struct device_attribute *attr,
 	 * we have no UUID set
 	 */
 	if (uuid_is_null(&ids->uuid)) {
-		printk_ratelimited(KERN_WARNING
-				   "No UUID available providing old NGUID\n");
+		dev_warn_ratelimited(dev,
+			"No UUID available providing old NGUID\n");
 		return sysfs_emit(buf, "%pU\n", ids->nguid);
 	}
 	return sysfs_emit(buf, "%pU\n", &ids->uuid);
-- 
2.35.1

[PATCH 5.10 47/84] mlxsw: spectrum_cnt: Reorder counter pools

[Greg Kroah-Hartman]

From: Petr Machata <petrm@nvidia.com>

[ Upstream commit 4b7a632ac4e7101ceefee8484d5c2ca505d347b3 ]

Both RIF and ACL flow counters use a 24-bit SW-managed counter address to
communicate which counter they want to bind.

In a number of Spectrum FW releases, binding a RIF counter is broken and
slices the counter index to 16 bits. As a result, on Spectrum-2 and above,
no more than about 410 RIF counters can be effectively used. This
translates to 205 netdevices for which L3 HW stats can be enabled. (This
does not happen on Spectrum-1, because there are fewer counters available
overall and the counter index never exceeds 16 bits.)

Binding counters to ACLs does not have this issue. Therefore reorder the
counter allocation scheme so that RIF counters come first and therefore get
lower indices that are below the 16-bit barrier.

Fixes: 98e60dce4da1 ("Merge branch 'mlxsw-Introduce-initial-Spectrum-2-support'")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220613125017.2018162-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum_cnt.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_cnt.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum_cnt.h
index a68d931090dd..15c8d4de8350 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_cnt.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_cnt.h
@@ -8,8 +8,8 @@
 #include "spectrum.h"
 
 enum mlxsw_sp_counter_sub_pool_id {
-	MLXSW_SP_COUNTER_SUB_POOL_FLOW,
 	MLXSW_SP_COUNTER_SUB_POOL_RIF,
+	MLXSW_SP_COUNTER_SUB_POOL_FLOW,
 };
 
 int mlxsw_sp_counter_alloc(struct mlxsw_sp *mlxsw_sp,
-- 
2.35.1

[PATCH 5.10 48/84] net: bgmac: Fix an erroneous kfree() in bgmac_remove()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit d7dd6eccfbc95ac47a12396f84e7e1b361db654b ]

'bgmac' is part of a managed resource allocated with bgmac_alloc(). It
should not be freed explicitly.

Remove the erroneous kfree() from the .remove() function.

Fixes: 34a5102c3235 ("net: bgmac: allocate struct bgmac just once & don't copy it")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/a026153108dd21239036a032b95c25b5cece253b.1655153616.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bgmac-bcma.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bgmac-bcma.c b/drivers/net/ethernet/broadcom/bgmac-bcma.c
index a5fd161ab5ee..26746197515f 100644
--- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
@@ -323,7 +323,6 @@ static void bgmac_remove(struct bcma_device *core)
 	bcma_mdio_mii_unregister(bgmac->mii_bus);
 	bgmac_enet_remove(bgmac);
 	bcma_set_drvdata(core, NULL);
-	kfree(bgmac);
 }
 
 static struct bcma_driver bgmac_bcma_driver = {
-- 
2.35.1

[PATCH 5.10 49/84] net: ax25: Fix deadlock caused by skb_recv_datagram in ax25_recvmsg

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit 219b51a6f040fa5367adadd7d58c4dda0896a01d ]

The skb_recv_datagram() in ax25_recvmsg() will hold lock_sock
and block until it receives a packet from the remote. If the client
doesn`t connect to server and calls read() directly, it will not
receive any packets forever. As a result, the deadlock will happen.

The fail log caused by deadlock is shown below:

[  369.606973] INFO: task ax25_deadlock:157 blocked for more than 245 seconds.
[  369.608919] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  369.613058] Call Trace:
[  369.613315]  <TASK>
[  369.614072]  __schedule+0x2f9/0xb20
[  369.615029]  schedule+0x49/0xb0
[  369.615734]  __lock_sock+0x92/0x100
[  369.616763]  ? destroy_sched_domains_rcu+0x20/0x20
[  369.617941]  lock_sock_nested+0x6e/0x70
[  369.618809]  ax25_bind+0xaa/0x210
[  369.619736]  __sys_bind+0xca/0xf0
[  369.620039]  ? do_futex+0xae/0x1b0
[  369.620387]  ? __x64_sys_futex+0x7c/0x1c0
[  369.620601]  ? fpregs_assert_state_consistent+0x19/0x40
[  369.620613]  __x64_sys_bind+0x11/0x20
[  369.621791]  do_syscall_64+0x3b/0x90
[  369.622423]  entry_SYSCALL_64_after_hwframe+0x46/0xb0
[  369.623319] RIP: 0033:0x7f43c8aa8af7
[  369.624301] RSP: 002b:00007f43c8197ef8 EFLAGS: 00000246 ORIG_RAX: 0000000000000031
[  369.625756] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f43c8aa8af7
[  369.626724] RDX: 0000000000000010 RSI: 000055768e2021d0 RDI: 0000000000000005
[  369.628569] RBP: 00007f43c8197f00 R08: 0000000000000011 R09: 00007f43c8198700
[  369.630208] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff845e6afe
[  369.632240] R13: 00007fff845e6aff R14: 00007f43c8197fc0 R15: 00007f43c8198700

This patch replaces skb_recv_datagram() with an open-coded variant of it
releasing the socket lock before the __skb_wait_for_more_packets() call
and re-acquiring it after such call in order that other functions that
need socket lock could be executed.

what's more, the socket lock will be released only when recvmsg() will
block and that should produce nicer overall behavior.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Suggested-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reported-by: Thomas Habets <thomas@@habets.se>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ax25/af_ax25.c | 34 ++++++++++++++++++++++++++++------
 1 file changed, 28 insertions(+), 6 deletions(-)

diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index 5fff027f25fa..a1f4cb836fcf 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -1653,9 +1653,12 @@ static int ax25_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,
 			int flags)
 {
 	struct sock *sk = sock->sk;
-	struct sk_buff *skb;
+	struct sk_buff *skb, *last;
+	struct sk_buff_head *sk_queue;
 	int copied;
 	int err = 0;
+	int off = 0;
+	long timeo;
 
 	lock_sock(sk);
 	/*
@@ -1667,11 +1670,29 @@ static int ax25_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,
 		goto out;
 	}
 
-	/* Now we can treat all alike */
-	skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
-				flags & MSG_DONTWAIT, &err);
-	if (skb == NULL)
-		goto out;
+	/*  We need support for non-blocking reads. */
+	sk_queue = &sk->sk_receive_queue;
+	skb = __skb_try_recv_datagram(sk, sk_queue, flags, &off, &err, &last);
+	/* If no packet is available, release_sock(sk) and try again. */
+	if (!skb) {
+		if (err != -EAGAIN)
+			goto out;
+		release_sock(sk);
+		timeo = sock_rcvtimeo(sk, flags & MSG_DONTWAIT);
+		while (timeo && !__skb_wait_for_more_packets(sk, sk_queue, &err,
+							     &timeo, last)) {
+			skb = __skb_try_recv_datagram(sk, sk_queue, flags, &off,
+						      &err, &last);
+			if (skb)
+				break;
+
+			if (err != -EAGAIN)
+				goto done;
+		}
+		if (!skb)
+			goto done;
+		lock_sock(sk);
+	}
 
 	if (!sk_to_ax25(sk)->pidincl)
 		skb_pull(skb, 1);		/* Remove PID */
@@ -1718,6 +1739,7 @@ static int ax25_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,
 out:
 	release_sock(sk);
 
+done:
 	return err;
 }
 
-- 
2.35.1

[PATCH 5.10 50/84] arm64: ftrace: fix branch range checks

[Greg Kroah-Hartman]

From: Mark Rutland <mark.rutland@arm.com>

[ Upstream commit 3eefdf9d1e406f3da47470b2854347009ffcb6fa ]

The branch range checks in ftrace_make_call() and ftrace_make_nop() are
incorrect, erroneously permitting a forwards branch of 128M and
erroneously rejecting a backwards branch of 128M.

This is because both functions calculate the offset backwards,
calculating the offset *from* the target *to* the branch, rather than
the other way around as the later comparisons expect.

If an out-of-range branch were erroeously permitted, this would later be
rejected by aarch64_insn_gen_branch_imm() as branch_imm_common() checks
the bounds correctly, resulting in warnings and the placement of a BRK
instruction. Note that this can only happen for a forwards branch of
exactly 128M, and so the caller would need to be exactly 128M bytes
below the relevant ftrace trampoline.

If an in-range branch were erroeously rejected, then:

* For modules when CONFIG_ARM64_MODULE_PLTS=y, this would result in the
  use of a PLT entry, which is benign.

  Note that this is the common case, as this is selected by
  CONFIG_RANDOMIZE_BASE (and therefore RANDOMIZE_MODULE_REGION_FULL),
  which distributions typically seelct. This is also selected by
  CONFIG_ARM64_ERRATUM_843419.

* For modules when CONFIG_ARM64_MODULE_PLTS=n, this would result in
  internal ftrace failures.

* For core kernel text, this would result in internal ftrace failues.

  Note that for this to happen, the kernel text would need to be at
  least 128M bytes in size, and typical configurations are smaller tha
  this.

Fix this by calculating the offset *from* the branch *to* the target in
both functions.

Fixes: f8af0b364e24 ("arm64: ftrace: don't validate branch via PLT in ftrace_make_nop()")
Fixes: e71a4e1bebaf ("arm64: ftrace: add support for far branches to dynamic ftrace")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Will Deacon <will@kernel.org>
Tested-by: "Ivan T. Ivanov" <iivanov@suse.de>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220614080944.1349146-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/ftrace.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c
index 86a5cf9bc19a..e21a01b99999 100644
--- a/arch/arm64/kernel/ftrace.c
+++ b/arch/arm64/kernel/ftrace.c
@@ -83,7 +83,7 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 {
 	unsigned long pc = rec->ip;
 	u32 old, new;
-	long offset = (long)pc - (long)addr;
+	long offset = (long)addr - (long)pc;
 
 	if (offset < -SZ_128M || offset >= SZ_128M) {
 		struct module *mod;
@@ -182,7 +182,7 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
 	unsigned long pc = rec->ip;
 	bool validate = true;
 	u32 old = 0, new;
-	long offset = (long)pc - (long)addr;
+	long offset = (long)addr - (long)pc;
 
 	if (offset < -SZ_128M || offset >= SZ_128M) {
 		u32 replaced;
-- 
2.35.1

[PATCH 5.10 51/84] arm64: ftrace: consistently handle PLTs.

[Greg Kroah-Hartman]

From: Mark Rutland <mark.rutland@arm.com>

[ Upstream commit a6253579977e4c6f7818eeb05bf2bc65678a7187 ]

Sometimes it is necessary to use a PLT entry to call an ftrace
trampoline. This is handled by ftrace_make_call() and ftrace_make_nop(),
with each having *almost* identical logic, but this is not handled by
ftrace_modify_call() since its introduction in commit:

  3b23e4991fb66f6d ("arm64: implement ftrace with regs")

Due to this, if we ever were to call ftrace_modify_call() for a callsite
which requires a PLT entry for a trampoline, then either:

a) If the old addr requires a trampoline, ftrace_modify_call() will use
   an out-of-range address to generate the 'old' branch instruction.
   This will result in warnings from aarch64_insn_gen_branch_imm() and
   ftrace_modify_code(), and no instructions will be modified. As
   ftrace_modify_call() will return an error, this will result in
   subsequent internal ftrace errors.

b) If the old addr does not require a trampoline, but the new addr does,
   ftrace_modify_call() will use an out-of-range address to generate the
   'new' branch instruction. This will result in warnings from
   aarch64_insn_gen_branch_imm(), and ftrace_modify_code() will replace
   the 'old' branch with a BRK. This will result in a kernel panic when
   this BRK is later executed.

Practically speaking, case (a) is vastly more likely than case (b), and
typically this will result in internal ftrace errors that don't
necessarily affect the rest of the system. This can be demonstrated with
an out-of-tree test module which triggers ftrace_modify_call(), e.g.

| # insmod test_ftrace.ko
| test_ftrace: Function test_function raw=0xffffb3749399201c, callsite=0xffffb37493992024
| branch_imm_common: offset out of range
| branch_imm_common: offset out of range
| ------------[ ftrace bug ]------------
| ftrace failed to modify
| [<ffffb37493992024>] test_function+0x8/0x38 [test_ftrace]
|  actual:   1d:00:00:94
| Updating ftrace call site to call a different ftrace function
| ftrace record flags: e0000002
|  (2) R
|  expected tramp: ffffb374ae42ed54
| ------------[ cut here ]------------
| WARNING: CPU: 0 PID: 165 at kernel/trace/ftrace.c:2085 ftrace_bug+0x280/0x2b0
| Modules linked in: test_ftrace(+)
| CPU: 0 PID: 165 Comm: insmod Not tainted 5.19.0-rc2-00002-g4d9ead8b45ce #13
| Hardware name: linux,dummy-virt (DT)
| pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : ftrace_bug+0x280/0x2b0
| lr : ftrace_bug+0x280/0x2b0
| sp : ffff80000839ba00
| x29: ffff80000839ba00 x28: 0000000000000000 x27: ffff80000839bcf0
| x26: ffffb37493994180 x25: ffffb374b0991c28 x24: ffffb374b0d70000
| x23: 00000000ffffffea x22: ffffb374afcc33b0 x21: ffffb374b08f9cc8
| x20: ffff572b8462c000 x19: ffffb374b08f9000 x18: ffffffffffffffff
| x17: 6c6c6163202c6331 x16: ffffb374ae5ad110 x15: ffffb374b0d51ee4
| x14: 0000000000000000 x13: 3435646532346561 x12: 3437336266666666
| x11: 203a706d61727420 x10: 6465746365707865 x9 : ffffb374ae5149e8
| x8 : 336266666666203a x7 : 706d617274206465 x6 : 00000000fffff167
| x5 : ffff572bffbc4a08 x4 : 00000000fffff167 x3 : 0000000000000000
| x2 : 0000000000000000 x1 : ffff572b84461e00 x0 : 0000000000000022
| Call trace:
|  ftrace_bug+0x280/0x2b0
|  ftrace_replace_code+0x98/0xa0
|  ftrace_modify_all_code+0xe0/0x144
|  arch_ftrace_update_code+0x14/0x20
|  ftrace_startup+0xf8/0x1b0
|  register_ftrace_function+0x38/0x90
|  test_ftrace_init+0xd0/0x1000 [test_ftrace]
|  do_one_initcall+0x50/0x2b0
|  do_init_module+0x50/0x1f0
|  load_module+0x17c8/0x1d64
|  __do_sys_finit_module+0xa8/0x100
|  __arm64_sys_finit_module+0x2c/0x3c
|  invoke_syscall+0x50/0x120
|  el0_svc_common.constprop.0+0xdc/0x100
|  do_el0_svc+0x3c/0xd0
|  el0_svc+0x34/0xb0
|  el0t_64_sync_handler+0xbc/0x140
|  el0t_64_sync+0x18c/0x190
| ---[ end trace 0000000000000000 ]---

We can solve this by consistently determining whether to use a PLT entry
for an address.

Note that since (the earlier) commit:

  f1a54ae9af0da4d7 ("arm64: module/ftrace: intialize PLT at load time")

... we can consistently determine the PLT address that a given callsite
will use, and therefore ftrace_make_nop() does not need to skip
validation when a PLT is in use.

This patch factors the existing logic out of ftrace_make_call() and
ftrace_make_nop() into a common ftrace_find_callable_addr() helper
function, which is used by ftrace_make_call(), ftrace_make_nop(), and
ftrace_modify_call(). In ftrace_make_nop() the patching is consistently
validated by ftrace_modify_code() as we can always determine what the
old instruction should have been.

Fixes: 3b23e4991fb6 ("arm64: implement ftrace with regs")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Will Deacon <will@kernel.org>
Tested-by: "Ivan T. Ivanov" <iivanov@suse.de>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220614080944.1349146-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/ftrace.c | 137 ++++++++++++++++++-------------------
 1 file changed, 66 insertions(+), 71 deletions(-)

diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c
index e21a01b99999..3724bab278b2 100644
--- a/arch/arm64/kernel/ftrace.c
+++ b/arch/arm64/kernel/ftrace.c
@@ -77,47 +77,76 @@ static struct plt_entry *get_ftrace_plt(struct module *mod, unsigned long addr)
 }
 
 /*
- * Turn on the call to ftrace_caller() in instrumented function
+ * Find the address the callsite must branch to in order to reach '*addr'.
+ *
+ * Due to the limited range of 'BL' instructions, modules may be placed too far
+ * away to branch directly and must use a PLT.
+ *
+ * Returns true when '*addr' contains a reachable target address, or has been
+ * modified to contain a PLT address. Returns false otherwise.
  */
-int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+static bool ftrace_find_callable_addr(struct dyn_ftrace *rec,
+				      struct module *mod,
+				      unsigned long *addr)
 {
 	unsigned long pc = rec->ip;
-	u32 old, new;
-	long offset = (long)addr - (long)pc;
+	long offset = (long)*addr - (long)pc;
+	struct plt_entry *plt;
 
-	if (offset < -SZ_128M || offset >= SZ_128M) {
-		struct module *mod;
-		struct plt_entry *plt;
+	/*
+	 * When the target is within range of the 'BL' instruction, use 'addr'
+	 * as-is and branch to that directly.
+	 */
+	if (offset >= -SZ_128M && offset < SZ_128M)
+		return true;
 
-		if (!IS_ENABLED(CONFIG_ARM64_MODULE_PLTS))
-			return -EINVAL;
+	/*
+	 * When the target is outside of the range of a 'BL' instruction, we
+	 * must use a PLT to reach it. We can only place PLTs for modules, and
+	 * only when module PLT support is built-in.
+	 */
+	if (!IS_ENABLED(CONFIG_ARM64_MODULE_PLTS))
+		return false;
 
-		/*
-		 * On kernels that support module PLTs, the offset between the
-		 * branch instruction and its target may legally exceed the
-		 * range of an ordinary relative 'bl' opcode. In this case, we
-		 * need to branch via a trampoline in the module.
-		 *
-		 * NOTE: __module_text_address() must be called with preemption
-		 * disabled, but we can rely on ftrace_lock to ensure that 'mod'
-		 * retains its validity throughout the remainder of this code.
-		 */
+	/*
+	 * 'mod' is only set at module load time, but if we end up
+	 * dealing with an out-of-range condition, we can assume it
+	 * is due to a module being loaded far away from the kernel.
+	 *
+	 * NOTE: __module_text_address() must be called with preemption
+	 * disabled, but we can rely on ftrace_lock to ensure that 'mod'
+	 * retains its validity throughout the remainder of this code.
+	 */
+	if (!mod) {
 		preempt_disable();
 		mod = __module_text_address(pc);
 		preempt_enable();
+	}
 
-		if (WARN_ON(!mod))
-			return -EINVAL;
+	if (WARN_ON(!mod))
+		return false;
 
-		plt = get_ftrace_plt(mod, addr);
-		if (!plt) {
-			pr_err("ftrace: no module PLT for %ps\n", (void *)addr);
-			return -EINVAL;
-		}
-
-		addr = (unsigned long)plt;
+	plt = get_ftrace_plt(mod, *addr);
+	if (!plt) {
+		pr_err("ftrace: no module PLT for %ps\n", (void *)*addr);
+		return false;
 	}
 
+	*addr = (unsigned long)plt;
+	return true;
+}
+
+/*
+ * Turn on the call to ftrace_caller() in instrumented function
+ */
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned long pc = rec->ip;
+	u32 old, new;
+
+	if (!ftrace_find_callable_addr(rec, NULL, &addr))
+		return -EINVAL;
+
 	old = aarch64_insn_gen_nop();
 	new = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK);
 
@@ -131,6 +160,11 @@ int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
 	unsigned long pc = rec->ip;
 	u32 old, new;
 
+	if (!ftrace_find_callable_addr(rec, NULL, &old_addr))
+		return -EINVAL;
+	if (!ftrace_find_callable_addr(rec, NULL, &addr))
+		return -EINVAL;
+
 	old = aarch64_insn_gen_branch_imm(pc, old_addr,
 					  AARCH64_INSN_BRANCH_LINK);
 	new = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK);
@@ -180,54 +214,15 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
 		    unsigned long addr)
 {
 	unsigned long pc = rec->ip;
-	bool validate = true;
 	u32 old = 0, new;
-	long offset = (long)addr - (long)pc;
 
-	if (offset < -SZ_128M || offset >= SZ_128M) {
-		u32 replaced;
-
-		if (!IS_ENABLED(CONFIG_ARM64_MODULE_PLTS))
-			return -EINVAL;
-
-		/*
-		 * 'mod' is only set at module load time, but if we end up
-		 * dealing with an out-of-range condition, we can assume it
-		 * is due to a module being loaded far away from the kernel.
-		 */
-		if (!mod) {
-			preempt_disable();
-			mod = __module_text_address(pc);
-			preempt_enable();
-
-			if (WARN_ON(!mod))
-				return -EINVAL;
-		}
-
-		/*
-		 * The instruction we are about to patch may be a branch and
-		 * link instruction that was redirected via a PLT entry. In
-		 * this case, the normal validation will fail, but we can at
-		 * least check that we are dealing with a branch and link
-		 * instruction that points into the right module.
-		 */
-		if (aarch64_insn_read((void *)pc, &replaced))
-			return -EFAULT;
-
-		if (!aarch64_insn_is_bl(replaced) ||
-		    !within_module(pc + aarch64_get_branch_offset(replaced),
-				   mod))
-			return -EINVAL;
-
-		validate = false;
-	} else {
-		old = aarch64_insn_gen_branch_imm(pc, addr,
-						  AARCH64_INSN_BRANCH_LINK);
-	}
+	if (!ftrace_find_callable_addr(rec, mod, &addr))
+		return -EINVAL;
 
+	old = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK);
 	new = aarch64_insn_gen_nop();
 
-	return ftrace_modify_code(pc, old, new, validate);
+	return ftrace_modify_code(pc, old, new, true);
 }
 
 void arch_ftrace_update_code(int command)
-- 
2.35.1

[PATCH 5.10 52/84] certs/blacklist_hashes.c: fix const confusion in certs blacklist

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit 6a1c3767d82ed8233de1263aa7da81595e176087 ]

This file fails to compile as follows:

  CC      certs/blacklist_hashes.o
certs/blacklist_hashes.c:4:1: error: ignoring attribute ‘section (".init.data")’ because it conflicts with previous ‘section (".init.rodata")’ [-Werror=attributes]
    4 | const char __initdata *const blacklist_hashes[] = {
      | ^~~~~
In file included from certs/blacklist_hashes.c:2:
certs/blacklist.h:5:38: note: previous declaration here
    5 | extern const char __initconst *const blacklist_hashes[];
      |                                      ^~~~~~~~~~~~~~~~

Apply the same fix as commit 2be04df5668d ("certs/blacklist_nohashes.c:
fix const confusion in certs blacklist").

Fixes: 734114f8782f ("KEYS: Add a system blacklist keyring")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Mickaël Salaün <mic@linux.microsoft.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 certs/blacklist_hashes.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/certs/blacklist_hashes.c b/certs/blacklist_hashes.c
index 344892337be0..d5961aa3d338 100644
--- a/certs/blacklist_hashes.c
+++ b/certs/blacklist_hashes.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "blacklist.h"
 
-const char __initdata *const blacklist_hashes[] = {
+const char __initconst *const blacklist_hashes[] = {
 #include CONFIG_SYSTEM_BLACKLIST_HASH_LIST
 	, NULL
 };
-- 
2.35.1

[PATCH 5.10 53/84] block: Fix handling of offline queues in blk_mq_alloc_request_hctx()

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 14dc7a18abbe4176f5626c13c333670da8e06aa1 ]

This patch prevents that test nvme/004 triggers the following:

UBSAN: array-index-out-of-bounds in block/blk-mq.h:135:9
index 512 is out of range for type 'long unsigned int [512]'
Call Trace:
 show_stack+0x52/0x58
 dump_stack_lvl+0x49/0x5e
 dump_stack+0x10/0x12
 ubsan_epilogue+0x9/0x3b
 __ubsan_handle_out_of_bounds.cold+0x44/0x49
 blk_mq_alloc_request_hctx+0x304/0x310
 __nvme_submit_sync_cmd+0x70/0x200 [nvme_core]
 nvmf_connect_io_queue+0x23e/0x2a0 [nvme_fabrics]
 nvme_loop_connect_io_queues+0x8d/0xb0 [nvme_loop]
 nvme_loop_create_ctrl+0x58e/0x7d0 [nvme_loop]
 nvmf_create_ctrl+0x1d7/0x4d0 [nvme_fabrics]
 nvmf_dev_write+0xae/0x111 [nvme_fabrics]
 vfs_write+0x144/0x560
 ksys_write+0xb7/0x140
 __x64_sys_write+0x42/0x50
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Fixes: 20e4d8139319 ("blk-mq: simplify queue mapping & schedule with each possisble CPU")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220615210004.1031820-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-mq.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index 15a11a217cd0..c5d82b21a1cc 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -466,6 +466,8 @@ struct request *blk_mq_alloc_request_hctx(struct request_queue *q,
 	if (!blk_mq_hw_queue_mapped(data.hctx))
 		goto out_queue_exit;
 	cpu = cpumask_first_and(data.hctx->cpumask, cpu_online_mask);
+	if (cpu >= nr_cpu_ids)
+		goto out_queue_exit;
 	data.ctx = __blk_mq_get_ctx(q, cpu);
 
 	if (!q->elevator)
-- 
2.35.1

[PATCH 5.10 54/84] faddr2line: Fix overlapping text section failures, the sequel

[Greg Kroah-Hartman]

From: Josh Poimboeuf <jpoimboe@kernel.org>

[ Upstream commit dcea997beed694cbd8705100ca1a6eb0d886de69 ]

If a function lives in a section other than .text, but .text also exists
in the object, faddr2line may wrongly assume .text.  This can result in
comically wrong output.  For example:

  $ scripts/faddr2line vmlinux.o enter_from_user_mode+0x1c
  enter_from_user_mode+0x1c/0x30:
  find_next_bit at /home/jpoimboe/git/linux/./include/linux/find.h:40
  (inlined by) perf_clear_dirty_counters at /home/jpoimboe/git/linux/arch/x86/events/core.c:2504

Fix it by passing the section name to addr2line, unless the object file
is vmlinux, in which case the symbol table uses absolute addresses.

Fixes: 1d1a0e7c5100 ("scripts/faddr2line: Fix overlapping text section failures")
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/7d25bc1408bd3a750ac26e60d2f2815a5f4a8363.1654130536.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/faddr2line | 45 ++++++++++++++++++++++++++++++++++-----------
 1 file changed, 34 insertions(+), 11 deletions(-)

diff --git a/scripts/faddr2line b/scripts/faddr2line
index 0e6268d59883..94ed98dd899f 100755
--- a/scripts/faddr2line
+++ b/scripts/faddr2line
@@ -95,17 +95,25 @@ __faddr2line() {
 	local print_warnings=$4
 
 	local sym_name=${func_addr%+*}
-	local offset=${func_addr#*+}
-	offset=${offset%/*}
+	local func_offset=${func_addr#*+}
+	func_offset=${func_offset%/*}
 	local user_size=
+	local file_type
+	local is_vmlinux=0
 	[[ $func_addr =~ "/" ]] && user_size=${func_addr#*/}
 
-	if [[ -z $sym_name ]] || [[ -z $offset ]] || [[ $sym_name = $func_addr ]]; then
+	if [[ -z $sym_name ]] || [[ -z $func_offset ]] || [[ $sym_name = $func_addr ]]; then
 		warn "bad func+offset $func_addr"
 		DONE=1
 		return
 	fi
 
+	# vmlinux uses absolute addresses in the section table rather than
+	# section offsets.
+	local file_type=$(${READELF} --file-header $objfile |
+		${AWK} '$1 == "Type:" { print $2; exit }')
+	[[ $file_type = "EXEC" ]] && is_vmlinux=1
+
 	# Go through each of the object's symbols which match the func name.
 	# In rare cases there might be duplicates, in which case we print all
 	# matches.
@@ -114,9 +122,11 @@ __faddr2line() {
 		local sym_addr=0x${fields[1]}
 		local sym_elf_size=${fields[2]}
 		local sym_sec=${fields[6]}
+		local sec_size
+		local sec_name
 
 		# Get the section size:
-		local sec_size=$(${READELF} --section-headers --wide $objfile |
+		sec_size=$(${READELF} --section-headers --wide $objfile |
 			sed 's/\[ /\[/' |
 			${AWK} -v sec=$sym_sec '$1 == "[" sec "]" { print "0x" $6; exit }')
 
@@ -126,6 +136,17 @@ __faddr2line() {
 			return
 		fi
 
+		# Get the section name:
+		sec_name=$(${READELF} --section-headers --wide $objfile |
+			sed 's/\[ /\[/' |
+			${AWK} -v sec=$sym_sec '$1 == "[" sec "]" { print $2; exit }')
+
+		if [[ -z $sec_name ]]; then
+			warn "bad section name: section: $sym_sec"
+			DONE=1
+			return
+		fi
+
 		# Calculate the symbol size.
 		#
 		# Unfortunately we can't use the ELF size, because kallsyms
@@ -174,10 +195,10 @@ __faddr2line() {
 
 		sym_size=0x$(printf %x $sym_size)
 
-		# Calculate the section address from user-supplied offset:
-		local addr=$(($sym_addr + $offset))
+		# Calculate the address from user-supplied offset:
+		local addr=$(($sym_addr + $func_offset))
 		if [[ -z $addr ]] || [[ $addr = 0 ]]; then
-			warn "bad address: $sym_addr + $offset"
+			warn "bad address: $sym_addr + $func_offset"
 			DONE=1
 			return
 		fi
@@ -191,9 +212,9 @@ __faddr2line() {
 		fi
 
 		# Make sure the provided offset is within the symbol's range:
-		if [[ $offset -gt $sym_size ]]; then
+		if [[ $func_offset -gt $sym_size ]]; then
 			[[ $print_warnings = 1 ]] &&
-				echo "skipping $sym_name address at $addr due to size mismatch ($offset > $sym_size)"
+				echo "skipping $sym_name address at $addr due to size mismatch ($func_offset > $sym_size)"
 			continue
 		fi
 
@@ -202,11 +223,13 @@ __faddr2line() {
 		[[ $FIRST = 0 ]] && echo
 		FIRST=0
 
-		echo "$sym_name+$offset/$sym_size:"
+		echo "$sym_name+$func_offset/$sym_size:"
 
 		# Pass section address to addr2line and strip absolute paths
 		# from the output:
-		local output=$(${ADDR2LINE} -fpie $objfile $addr | sed "s; $dir_prefix\(\./\)*; ;")
+		local args="--functions --pretty-print --inlines --exe=$objfile"
+		[[ $is_vmlinux = 0 ]] && args="$args --section=$sec_name"
+		local output=$(${ADDR2LINE} $args $addr | sed "s; $dir_prefix\(\./\)*; ;")
 		[[ -z $output ]] && continue
 
 		# Default output (non --list):
-- 
2.35.1

[PATCH 5.10 55/84] i2c: npcm7xx: Add check for platform_driver_register

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit 6ba12b56b9b844b83ed54fb7ed59fb0eb41e4045 ]

As platform_driver_register() could fail, it should be better
to deal with the return value in order to maintain the code
consisitency.

Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-npcm7xx.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c
index 20a2f903b7f6..d9ac62c1ac25 100644
--- a/drivers/i2c/busses/i2c-npcm7xx.c
+++ b/drivers/i2c/busses/i2c-npcm7xx.c
@@ -2369,8 +2369,7 @@ static struct platform_driver npcm_i2c_bus_driver = {
 static int __init npcm_i2c_init(void)
 {
 	npcm_i2c_debugfs_dir = debugfs_create_dir("npcm_i2c", NULL);
-	platform_driver_register(&npcm_i2c_bus_driver);
-	return 0;
+	return platform_driver_register(&npcm_i2c_bus_driver);
 }
 module_init(npcm_i2c_init);
 
-- 
2.35.1

[PATCH 5.10 56/84] irqchip/gic/realview: Fix refcount leak in realview_gic_of_init

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit f4b98e314888cc51486421bcf6d52852452ea48b ]

of_find_matching_node_and_match() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: 82b0a434b436 ("irqchip/gic/realview: Support more RealView DCC variants")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220601080930.31005-2-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-gic-realview.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/irqchip/irq-gic-realview.c b/drivers/irqchip/irq-gic-realview.c
index b4c1924f0255..38fab02ffe9d 100644
--- a/drivers/irqchip/irq-gic-realview.c
+++ b/drivers/irqchip/irq-gic-realview.c
@@ -57,6 +57,7 @@ realview_gic_of_init(struct device_node *node, struct device_node *parent)
 
 	/* The PB11MPCore GIC needs to be configured in the syscon */
 	map = syscon_node_to_regmap(np);
+	of_node_put(np);
 	if (!IS_ERR(map)) {
 		/* new irq mode with no DCC */
 		regmap_write(map, REALVIEW_SYS_LOCK_OFFSET,
-- 
2.35.1

[PATCH 5.10 57/84] irqchip/gic-v3: Fix error handling in gic_populate_ppi_partitions

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit ec8401a429ffee34ccf38cebf3443f8d5ae6cb0d ]

of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
When kcalloc fails, it missing of_node_put() and results in refcount
leak. Fix this by goto out_put_node label.

Fixes: 52085d3f2028 ("irqchip/gic-v3: Dynamically allocate PPI partition descriptors")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220601080930.31005-5-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-gic-v3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index e5e3fd6b9554..8d62028a0e04 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -1831,7 +1831,7 @@ static void __init gic_populate_ppi_partitions(struct device_node *gic_node)
 
 	gic_data.ppi_descs = kcalloc(gic_data.ppi_nr, sizeof(*gic_data.ppi_descs), GFP_KERNEL);
 	if (!gic_data.ppi_descs)
-		return;
+		goto out_put_node;
 
 	nr_parts = of_get_child_count(parts_node);
 
-- 
2.35.1

[PATCH 5.10 58/84] irqchip/gic-v3: Fix refcount leak in gic_populate_ppi_partitions

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit fa1ad9d4cc47ca2470cd904ad4519f05d7e43a2b ]

of_find_node_by_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: e3825ba1af3a ("irqchip/gic-v3: Add support for partitioned PPIs")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220601080930.31005-6-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-gic-v3.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 8d62028a0e04..4c8f18f0cecf 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -1872,12 +1872,15 @@ static void __init gic_populate_ppi_partitions(struct device_node *gic_node)
 				continue;
 
 			cpu = of_cpu_node_to_id(cpu_node);
-			if (WARN_ON(cpu < 0))
+			if (WARN_ON(cpu < 0)) {
+				of_node_put(cpu_node);
 				continue;
+			}
 
 			pr_cont("%pOF[%d] ", cpu_node, cpu);
 
 			cpumask_set_cpu(cpu, &part->mask);
+			of_node_put(cpu_node);
 		}
 
 		pr_cont("}\n");
-- 
2.35.1

[PATCH 5.10 59/84] i2c: designware: Use standard optional ref clock implementation

[Greg Kroah-Hartman]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit 27071b5cbca59d8e8f8750c199a6cbf8c9799963 ]

Even though the DW I2C controller reference clock source is requested by
the method devm_clk_get() with non-optional clock requirement the way the
clock handler is used afterwards has a pure optional clock semantic
(though in some circumstances we can get a warning about the clock missing
printed in the system console). There is no point in reimplementing that
functionality seeing the kernel clock framework already supports the
optional interface from scratch. Thus let's convert the platform driver to
using it.

Note by providing this commit we get to fix two problems. The first one
was introduced in commit c62ebb3d5f0d ("i2c: designware: Add support for
an interface clock"). It causes not having the interface clock (pclk)
enabled/disabled in case if the reference clock isn't provided. The second
problem was first introduced in commit b33af11de236 ("i2c: designware: Do
not require clock when SSCN and FFCN are provided"). Since that
modification the deferred probe procedure has been unsupported in case if
the interface clock isn't ready.

Fixes: c62ebb3d5f0d ("i2c: designware: Add support for an interface clock")
Fixes: b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-designware-common.c  |  3 ---
 drivers/i2c/busses/i2c-designware-platdrv.c | 13 +++++++++++--
 2 files changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 3c19aada4b30..9468c6c89b3f 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -474,9 +474,6 @@ int i2c_dw_prepare_clk(struct dw_i2c_dev *dev, bool prepare)
 {
 	int ret;
 
-	if (IS_ERR(dev->clk))
-		return PTR_ERR(dev->clk);
-
 	if (prepare) {
 		/* Optional interface clock */
 		ret = clk_prepare_enable(dev->pclk);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 0dfeb2d11603..ad91c7c0faa5 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -266,8 +266,17 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 		goto exit_reset;
 	}
 
-	dev->clk = devm_clk_get(&pdev->dev, NULL);
-	if (!i2c_dw_prepare_clk(dev, true)) {
+	dev->clk = devm_clk_get_optional(&pdev->dev, NULL);
+	if (IS_ERR(dev->clk)) {
+		ret = PTR_ERR(dev->clk);
+		goto exit_reset;
+	}
+
+	ret = i2c_dw_prepare_clk(dev, true);
+	if (ret)
+		goto exit_reset;
+
+	if (dev->clk) {
 		u64 clk_khz;
 
 		dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
-- 
2.35.1

[PATCH 5.10 60/84] mei: me: add raptor lake point S DID

[Greg Kroah-Hartman]

From: Alexander Usyskin <alexander.usyskin@intel.com>

commit 3ed8c7d39cfef831fe508fc1308f146912fa72e6 upstream.

Add Raptor (Point) Lake S device id.

Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20220606144225.282375-3-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/misc/mei/hw-me-regs.h |    2 ++
 drivers/misc/mei/pci-me.c     |    2 ++
 2 files changed, 4 insertions(+)

--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -109,6 +109,8 @@
 #define MEI_DEV_ID_ADP_P      0x51E0  /* Alder Lake Point P */
 #define MEI_DEV_ID_ADP_N      0x54E0  /* Alder Lake Point N */
 
+#define MEI_DEV_ID_RPL_S      0x7A68  /* Raptor Lake Point S */
+
 /*
  * MEI HW Section
  */
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -115,6 +115,8 @@ static const struct pci_device_id mei_me
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ADP_P, MEI_ME_PCH15_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ADP_N, MEI_ME_PCH15_CFG)},
 
+	{MEI_PCI_DEVICE(MEI_DEV_ID_RPL_S, MEI_ME_PCH15_CFG)},
+
 	/* required last entry */
 	{0, }
 };

[PATCH 5.10 61/84] comedi: vmk80xx: fix expression for tx buffer size

[Greg Kroah-Hartman]

From: Ian Abbott <abbotti@mev.co.uk>

commit 242439f7e279d86b3f73b5de724bc67b2f8aeb07 upstream.

The expression for setting the size of the allocated bulk TX buffer
(`devpriv->usb_tx_buf`) is calling `usb_endpoint_maxp(devpriv->ep_rx)`,
which is using the wrong endpoint (should be `devpriv->ep_tx`).  Fix it.

Fixes: a23461c47482 ("comedi: vmk80xx: fix transfer-buffer overflow")
Cc: Johan Hovold <johan@kernel.org>
Cc: stable@vger.kernel.org # 4.9+
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20220607171819.4121-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/comedi/drivers/vmk80xx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/comedi/drivers/vmk80xx.c
+++ b/drivers/staging/comedi/drivers/vmk80xx.c
@@ -685,7 +685,7 @@ static int vmk80xx_alloc_usb_buffers(str
 	if (!devpriv->usb_rx_buf)
 		return -ENOMEM;
 
-	size = max(usb_endpoint_maxp(devpriv->ep_rx), MIN_BUF_SIZE);
+	size = max(usb_endpoint_maxp(devpriv->ep_tx), MIN_BUF_SIZE);
 	devpriv->usb_tx_buf = kzalloc(size, GFP_KERNEL);
 	if (!devpriv->usb_tx_buf)
 		return -ENOMEM;

[PATCH 5.10 62/84] crypto: memneq - move into lib/

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

commit abfed87e2a12bd246047d78c01d81eb9529f1d06 upstream.

This is used by code that doesn't need CONFIG_CRYPTO, so move this into
lib/ with a Kconfig option so that it can be selected by whatever needs
it.

This fixes a linker error Zheng pointed out when
CRYPTO_MANAGER_DISABLE_TESTS!=y and CRYPTO=m:

  lib/crypto/curve25519-selftest.o: In function `curve25519_selftest':
  curve25519-selftest.c:(.init.text+0x60): undefined reference to `__crypto_memneq'
  curve25519-selftest.c:(.init.text+0xec): undefined reference to `__crypto_memneq'
  curve25519-selftest.c:(.init.text+0x114): undefined reference to `__crypto_memneq'
  curve25519-selftest.c:(.init.text+0x154): undefined reference to `__crypto_memneq'

Reported-by: Zheng Bin <zhengbin13@huawei.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: stable@vger.kernel.org
Fixes: aa127963f1ca ("crypto: lib/curve25519 - re-add selftests")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 crypto/Kconfig           | 1 +
 crypto/Makefile          | 2 +-
 lib/Kconfig              | 3 +++
 lib/Makefile             | 1 +
 lib/crypto/Kconfig       | 1 +
 {crypto => lib}/memneq.c | 0
 crypto/Kconfig     |    1 
 crypto/Makefile    |    2 
 crypto/memneq.c    |  168 -----------------------------------------------------
 lib/Kconfig        |    3 
 lib/Makefile       |    1 
 lib/crypto/Kconfig |    1 
 lib/memneq.c       |  168 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 7 files changed, 175 insertions(+), 169 deletions(-)
 rename {crypto => lib}/memneq.c (100%)

--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -15,6 +15,7 @@ source "crypto/async_tx/Kconfig"
 #
 menuconfig CRYPTO
 	tristate "Cryptographic API"
+	select LIB_MEMNEQ
 	help
 	  This option provides the core Cryptographic API.
 
--- a/crypto/Makefile
+++ b/crypto/Makefile
@@ -4,7 +4,7 @@
 #
 
 obj-$(CONFIG_CRYPTO) += crypto.o
-crypto-y := api.o cipher.o compress.o memneq.o
+crypto-y := api.o cipher.o compress.o
 
 obj-$(CONFIG_CRYPTO_ENGINE) += crypto_engine.o
 obj-$(CONFIG_CRYPTO_FIPS) += fips.o
--- a/crypto/memneq.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Constant-time equality testing of memory regions.
- *
- * Authors:
- *
- *   James Yonan <james@openvpn.net>
- *   Daniel Borkmann <dborkman@redhat.com>
- *
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2013 OpenVPN Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2013 OpenVPN Technologies, Inc. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   * Neither the name of OpenVPN Technologies nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <crypto/algapi.h>
-
-#ifndef __HAVE_ARCH_CRYPTO_MEMNEQ
-
-/* Generic path for arbitrary size */
-static inline unsigned long
-__crypto_memneq_generic(const void *a, const void *b, size_t size)
-{
-	unsigned long neq = 0;
-
-#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
-	while (size >= sizeof(unsigned long)) {
-		neq |= *(unsigned long *)a ^ *(unsigned long *)b;
-		OPTIMIZER_HIDE_VAR(neq);
-		a += sizeof(unsigned long);
-		b += sizeof(unsigned long);
-		size -= sizeof(unsigned long);
-	}
-#endif /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
-	while (size > 0) {
-		neq |= *(unsigned char *)a ^ *(unsigned char *)b;
-		OPTIMIZER_HIDE_VAR(neq);
-		a += 1;
-		b += 1;
-		size -= 1;
-	}
-	return neq;
-}
-
-/* Loop-free fast-path for frequently used 16-byte size */
-static inline unsigned long __crypto_memneq_16(const void *a, const void *b)
-{
-	unsigned long neq = 0;
-
-#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
-	if (sizeof(unsigned long) == 8) {
-		neq |= *(unsigned long *)(a)   ^ *(unsigned long *)(b);
-		OPTIMIZER_HIDE_VAR(neq);
-		neq |= *(unsigned long *)(a+8) ^ *(unsigned long *)(b+8);
-		OPTIMIZER_HIDE_VAR(neq);
-	} else if (sizeof(unsigned int) == 4) {
-		neq |= *(unsigned int *)(a)    ^ *(unsigned int *)(b);
-		OPTIMIZER_HIDE_VAR(neq);
-		neq |= *(unsigned int *)(a+4)  ^ *(unsigned int *)(b+4);
-		OPTIMIZER_HIDE_VAR(neq);
-		neq |= *(unsigned int *)(a+8)  ^ *(unsigned int *)(b+8);
-		OPTIMIZER_HIDE_VAR(neq);
-		neq |= *(unsigned int *)(a+12) ^ *(unsigned int *)(b+12);
-		OPTIMIZER_HIDE_VAR(neq);
-	} else
-#endif /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
-	{
-		neq |= *(unsigned char *)(a)    ^ *(unsigned char *)(b);
-		OPTIMIZER_HIDE_VAR(neq);
-		neq |= *(unsigned char *)(a+1)  ^ *(unsigned char *)(b+1);
-		OPTIMIZER_HIDE_VAR(neq);
-		neq |= *(unsigned char *)(a+2)  ^ *(unsigned char *)(b+2);
-		OPTIMIZER_HIDE_VAR(neq);
-		neq |= *(unsigned char *)(a+3)  ^ *(unsigned char *)(b+3);
-		OPTIMIZER_HIDE_VAR(neq);
-		neq |= *(unsigned char *)(a+4)  ^ *(unsigned char *)(b+4);
-		OPTIMIZER_HIDE_VAR(neq);
-		neq |= *(unsigned char *)(a+5)  ^ *(unsigned char *)(b+5);
-		OPTIMIZER_HIDE_VAR(neq);
-		neq |= *(unsigned char *)(a+6)  ^ *(unsigned char *)(b+6);
-		OPTIMIZER_HIDE_VAR(neq);
-		neq |= *(unsigned char *)(a+7)  ^ *(unsigned char *)(b+7);
-		OPTIMIZER_HIDE_VAR(neq);
-		neq |= *(unsigned char *)(a+8)  ^ *(unsigned char *)(b+8);
-		OPTIMIZER_HIDE_VAR(neq);
-		neq |= *(unsigned char *)(a+9)  ^ *(unsigned char *)(b+9);
-		OPTIMIZER_HIDE_VAR(neq);
-		neq |= *(unsigned char *)(a+10) ^ *(unsigned char *)(b+10);
-		OPTIMIZER_HIDE_VAR(neq);
-		neq |= *(unsigned char *)(a+11) ^ *(unsigned char *)(b+11);
-		OPTIMIZER_HIDE_VAR(neq);
-		neq |= *(unsigned char *)(a+12) ^ *(unsigned char *)(b+12);
-		OPTIMIZER_HIDE_VAR(neq);
-		neq |= *(unsigned char *)(a+13) ^ *(unsigned char *)(b+13);
-		OPTIMIZER_HIDE_VAR(neq);
-		neq |= *(unsigned char *)(a+14) ^ *(unsigned char *)(b+14);
-		OPTIMIZER_HIDE_VAR(neq);
-		neq |= *(unsigned char *)(a+15) ^ *(unsigned char *)(b+15);
-		OPTIMIZER_HIDE_VAR(neq);
-	}
-
-	return neq;
-}
-
-/* Compare two areas of memory without leaking timing information,
- * and with special optimizations for common sizes.  Users should
- * not call this function directly, but should instead use
- * crypto_memneq defined in crypto/algapi.h.
- */
-noinline unsigned long __crypto_memneq(const void *a, const void *b,
-				       size_t size)
-{
-	switch (size) {
-	case 16:
-		return __crypto_memneq_16(a, b);
-	default:
-		return __crypto_memneq_generic(a, b, size);
-	}
-}
-EXPORT_SYMBOL(__crypto_memneq);
-
-#endif /* __HAVE_ARCH_CRYPTO_MEMNEQ */
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -103,6 +103,9 @@ config INDIRECT_PIO
 
 source "lib/crypto/Kconfig"
 
+config LIB_MEMNEQ
+	bool
+
 config CRC_CCITT
 	tristate "CRC-CCITT functions"
 	help
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -248,6 +248,7 @@ obj-$(CONFIG_DIMLIB) += dim/
 obj-$(CONFIG_SIGNATURE) += digsig.o
 
 lib-$(CONFIG_CLZ_TAB) += clz_tab.o
+lib-$(CONFIG_LIB_MEMNEQ) += memneq.o
 
 obj-$(CONFIG_GENERIC_STRNCPY_FROM_USER) += strncpy_from_user.o
 obj-$(CONFIG_GENERIC_STRNLEN_USER) += strnlen_user.o
--- a/lib/crypto/Kconfig
+++ b/lib/crypto/Kconfig
@@ -71,6 +71,7 @@ config CRYPTO_LIB_CURVE25519
 	tristate "Curve25519 scalar multiplication library"
 	depends on CRYPTO_ARCH_HAVE_LIB_CURVE25519 || !CRYPTO_ARCH_HAVE_LIB_CURVE25519
 	select CRYPTO_LIB_CURVE25519_GENERIC if CRYPTO_ARCH_HAVE_LIB_CURVE25519=n
+	select LIB_MEMNEQ
 	help
 	  Enable the Curve25519 library interface. This interface may be
 	  fulfilled by either the generic implementation or an arch-specific
--- /dev/null
+++ b/lib/memneq.c
@@ -0,0 +1,168 @@
+/*
+ * Constant-time equality testing of memory regions.
+ *
+ * Authors:
+ *
+ *   James Yonan <james@openvpn.net>
+ *   Daniel Borkmann <dborkman@redhat.com>
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2013 OpenVPN Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2013 OpenVPN Technologies, Inc. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of OpenVPN Technologies nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <crypto/algapi.h>
+
+#ifndef __HAVE_ARCH_CRYPTO_MEMNEQ
+
+/* Generic path for arbitrary size */
+static inline unsigned long
+__crypto_memneq_generic(const void *a, const void *b, size_t size)
+{
+	unsigned long neq = 0;
+
+#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
+	while (size >= sizeof(unsigned long)) {
+		neq |= *(unsigned long *)a ^ *(unsigned long *)b;
+		OPTIMIZER_HIDE_VAR(neq);
+		a += sizeof(unsigned long);
+		b += sizeof(unsigned long);
+		size -= sizeof(unsigned long);
+	}
+#endif /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
+	while (size > 0) {
+		neq |= *(unsigned char *)a ^ *(unsigned char *)b;
+		OPTIMIZER_HIDE_VAR(neq);
+		a += 1;
+		b += 1;
+		size -= 1;
+	}
+	return neq;
+}
+
+/* Loop-free fast-path for frequently used 16-byte size */
+static inline unsigned long __crypto_memneq_16(const void *a, const void *b)
+{
+	unsigned long neq = 0;
+
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+	if (sizeof(unsigned long) == 8) {
+		neq |= *(unsigned long *)(a)   ^ *(unsigned long *)(b);
+		OPTIMIZER_HIDE_VAR(neq);
+		neq |= *(unsigned long *)(a+8) ^ *(unsigned long *)(b+8);
+		OPTIMIZER_HIDE_VAR(neq);
+	} else if (sizeof(unsigned int) == 4) {
+		neq |= *(unsigned int *)(a)    ^ *(unsigned int *)(b);
+		OPTIMIZER_HIDE_VAR(neq);
+		neq |= *(unsigned int *)(a+4)  ^ *(unsigned int *)(b+4);
+		OPTIMIZER_HIDE_VAR(neq);
+		neq |= *(unsigned int *)(a+8)  ^ *(unsigned int *)(b+8);
+		OPTIMIZER_HIDE_VAR(neq);
+		neq |= *(unsigned int *)(a+12) ^ *(unsigned int *)(b+12);
+		OPTIMIZER_HIDE_VAR(neq);
+	} else
+#endif /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
+	{
+		neq |= *(unsigned char *)(a)    ^ *(unsigned char *)(b);
+		OPTIMIZER_HIDE_VAR(neq);
+		neq |= *(unsigned char *)(a+1)  ^ *(unsigned char *)(b+1);
+		OPTIMIZER_HIDE_VAR(neq);
+		neq |= *(unsigned char *)(a+2)  ^ *(unsigned char *)(b+2);
+		OPTIMIZER_HIDE_VAR(neq);
+		neq |= *(unsigned char *)(a+3)  ^ *(unsigned char *)(b+3);
+		OPTIMIZER_HIDE_VAR(neq);
+		neq |= *(unsigned char *)(a+4)  ^ *(unsigned char *)(b+4);
+		OPTIMIZER_HIDE_VAR(neq);
+		neq |= *(unsigned char *)(a+5)  ^ *(unsigned char *)(b+5);
+		OPTIMIZER_HIDE_VAR(neq);
+		neq |= *(unsigned char *)(a+6)  ^ *(unsigned char *)(b+6);
+		OPTIMIZER_HIDE_VAR(neq);
+		neq |= *(unsigned char *)(a+7)  ^ *(unsigned char *)(b+7);
+		OPTIMIZER_HIDE_VAR(neq);
+		neq |= *(unsigned char *)(a+8)  ^ *(unsigned char *)(b+8);
+		OPTIMIZER_HIDE_VAR(neq);
+		neq |= *(unsigned char *)(a+9)  ^ *(unsigned char *)(b+9);
+		OPTIMIZER_HIDE_VAR(neq);
+		neq |= *(unsigned char *)(a+10) ^ *(unsigned char *)(b+10);
+		OPTIMIZER_HIDE_VAR(neq);
+		neq |= *(unsigned char *)(a+11) ^ *(unsigned char *)(b+11);
+		OPTIMIZER_HIDE_VAR(neq);
+		neq |= *(unsigned char *)(a+12) ^ *(unsigned char *)(b+12);
+		OPTIMIZER_HIDE_VAR(neq);
+		neq |= *(unsigned char *)(a+13) ^ *(unsigned char *)(b+13);
+		OPTIMIZER_HIDE_VAR(neq);
+		neq |= *(unsigned char *)(a+14) ^ *(unsigned char *)(b+14);
+		OPTIMIZER_HIDE_VAR(neq);
+		neq |= *(unsigned char *)(a+15) ^ *(unsigned char *)(b+15);
+		OPTIMIZER_HIDE_VAR(neq);
+	}
+
+	return neq;
+}
+
+/* Compare two areas of memory without leaking timing information,
+ * and with special optimizations for common sizes.  Users should
+ * not call this function directly, but should instead use
+ * crypto_memneq defined in crypto/algapi.h.
+ */
+noinline unsigned long __crypto_memneq(const void *a, const void *b,
+				       size_t size)
+{
+	switch (size) {
+	case 16:
+		return __crypto_memneq_16(a, b);
+	default:
+		return __crypto_memneq_generic(a, b, size);
+	}
+}
+EXPORT_SYMBOL(__crypto_memneq);
+
+#endif /* __HAVE_ARCH_CRYPTO_MEMNEQ */

[PATCH 5.10 63/84] USB: serial: option: add support for Cinterion MV31 with new baseline

[Greg Kroah-Hartman]

From: Slark Xiao <slark_xiao@163.com>

commit 158f7585bfcea4aae0ad4128d032a80fec550df1 upstream.

Adding support for Cinterion device MV31 with Qualcomm
new baseline. Use different PIDs to separate it from
previous base line products.
All interfaces settings keep same as previous.

Below is test evidence:
T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00b8 Rev=04.14
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00B8 USB Mobile Broadband
S:  SerialNumber=90418e79
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00b9 Rev=04.14
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00B9 USB Mobile Broadband
S:  SerialNumber=90418e79
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

For PID 00b8, interface 3 is GNSS port which don't use serial driver.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20220601034740.5438-1-slark_xiao@163.com
[ johan: rename defines using a "2" infix ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -432,6 +432,8 @@ static void option_instat_callback(struc
 #define CINTERION_PRODUCT_CLS8			0x00b0
 #define CINTERION_PRODUCT_MV31_MBIM		0x00b3
 #define CINTERION_PRODUCT_MV31_RMNET		0x00b7
+#define CINTERION_PRODUCT_MV31_2_MBIM		0x00b8
+#define CINTERION_PRODUCT_MV31_2_RMNET		0x00b9
 #define CINTERION_PRODUCT_MV32_WA		0x00f1
 #define CINTERION_PRODUCT_MV32_WB		0x00f2
 
@@ -1979,6 +1981,10 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(3)},
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_RMNET, 0xff),
 	  .driver_info = RSVD(0)},
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_2_MBIM, 0xff),
+	  .driver_info = RSVD(3)},
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_2_RMNET, 0xff),
+	  .driver_info = RSVD(0)},
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA, 0xff),
 	  .driver_info = RSVD(3)},
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB, 0xff),

[PATCH 5.10 64/84] USB: serial: io_ti: add Agilent E5805A support

[Greg Kroah-Hartman]

From: Robert Eckelmann <longnoserob@gmail.com>

commit 908e698f2149c3d6a67d9ae15c75545a3f392559 upstream.

Add support for Agilent E5805A (rebranded ION Edgeport/4) to io_ti.

Signed-off-by: Robert Eckelmann <longnoserob@gmail.com>
Link: https://lore.kernel.org/r/20220521230808.30931eca@octoberrain
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/io_ti.c      |    2 ++
 drivers/usb/serial/io_usbvend.h |    1 +
 2 files changed, 3 insertions(+)

--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -168,6 +168,7 @@ static const struct usb_device_id edgepo
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8S) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416B) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_E5805A) },
 	{ }
 };
 
@@ -206,6 +207,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8S) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416B) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_E5805A) },
 	{ }
 };
 
--- a/drivers/usb/serial/io_usbvend.h
+++ b/drivers/usb/serial/io_usbvend.h
@@ -212,6 +212,7 @@
 //
 // Definitions for other product IDs
 #define ION_DEVICE_ID_MT4X56USB			0x1403	// OEM device
+#define ION_DEVICE_ID_E5805A			0x1A01  // OEM device (rebranded Edgeport/4)
 
 
 #define	GENERATION_ID_FROM_USB_PRODUCT_ID(ProductId)				\

[PATCH 5.10 65/84] usb: dwc2: Fix memory leak in dwc2_hcd_init

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

commit 3755278f078460b021cd0384562977bf2039a57a upstream.

usb_create_hcd will alloc memory for hcd, and we should
call usb_put_hcd to free it when platform_get_resource()
fails to prevent memory leak.
goto error2 label instead error1 to fix this.

Fixes: 856e6e8e0f93 ("usb: dwc2: check return value after calling platform_get_resource()")
Cc: stable <stable@kernel.org>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220530085413.44068-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/hcd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -5076,7 +5076,7 @@ int dwc2_hcd_init(struct dwc2_hsotg *hso
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		retval = -EINVAL;
-		goto error1;
+		goto error2;
 	}
 	hcd->rsrc_start = res->start;
 	hcd->rsrc_len = resource_size(res);

[PATCH 5.10 66/84] usb: gadget: lpc32xx_udc: Fix refcount leak in lpc32xx_udc_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

commit 4757c9ade34178b351580133771f510b5ffcf9c8 upstream.

of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
of_node_put() will check NULL pointer.

Fixes: 24a28e428351 ("USB: gadget driver for LPC32xx")
Cc: stable <stable@kernel.org>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220603140246.64529-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/lpc32xx_udc.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -3015,6 +3015,7 @@ static int lpc32xx_udc_probe(struct plat
 	}
 
 	udc->isp1301_i2c_client = isp1301_get_client(isp1301_node);
+	of_node_put(isp1301_node);
 	if (!udc->isp1301_i2c_client) {
 		return -EPROBE_DEFER;
 	}

[PATCH 5.10 67/84] serial: 8250: Store to lsr_save_flags after lsr read

[Greg Kroah-Hartman]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

commit be03b0651ffd8bab69dfd574c6818b446c0753ce upstream.

Not all LSR register flags are preserved across reads. Therefore, LSR
readers must store the non-preserved bits into lsr_save_flags.

This fix was initially mixed into feature commit f6f586102add ("serial:
8250: Handle UART without interrupt on TEMT using em485"). However,
that feature change had a flaw and it was reverted to make room for
simpler approach providing the same feature. The embedded fix got
reverted with the feature change.

Re-add the lsr_save_flags fix and properly mark it's a fix.

Link: https://lore.kernel.org/all/1d6c31d-d194-9e6a-ddf9-5f29af829f3@linux.intel.com/T/#m1737eef986bd20cf19593e344cebd7b0244945fc
Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250")
Cc: stable <stable@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@penugtronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/f4d774be-1437-a550-8334-19d8722ab98c@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_port.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1532,6 +1532,8 @@ static inline void __stop_tx(struct uart
 
 	if (em485) {
 		unsigned char lsr = serial_in(p, UART_LSR);
+		p->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+
 		/*
 		 * To provide required timeing and allow FIFO transfer,
 		 * __stop_tx_rs485() must be called only when both FIFO and

[PATCH 5.10 68/84] dm mirror log: round up region bitmap size to BITS_PER_LONG

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

commit 85e123c27d5cbc22cfdc01de1e2ca1d9003a02d0 upstream.

The code in dm-log rounds up bitset_size to 32 bits. It then uses
find_next_zero_bit_le on the allocated region. find_next_zero_bit_le
accesses the bitmap using unsigned long pointers. So, on 64-bit
architectures, it may access 4 bytes beyond the allocated size.

Fix this bug by rounding up bitset_size to BITS_PER_LONG.

This bug was found by running the lvm2 testsuite with kasan.

Fixes: 29121bd0b00e ("[PATCH] dm mirror log: bitset_size fix")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-log.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/md/dm-log.c
+++ b/drivers/md/dm-log.c
@@ -415,8 +415,7 @@ static int create_log_context(struct dm_
 	/*
 	 * Work out how many "unsigned long"s we need to hold the bitset.
 	 */
-	bitset_size = dm_round_up(region_count,
-				  sizeof(*lc->clean_bits) << BYTE_SHIFT);
+	bitset_size = dm_round_up(region_count, BITS_PER_LONG);
 	bitset_size >>= BYTE_SHIFT;
 
 	lc->bitset_uint32_count = bitset_size / sizeof(*lc->clean_bits);

[PATCH 5.10 69/84] drm/amd/display: Cap OLED brightness per max frame-average luminance

[Greg Kroah-Hartman]

From: Roman Li <roman.li@amd.com>

commit 4fd17f2ac0aa4e48823ac2ede5b050fb70300bf4 upstream.

[Why]
For OLED eDP the Display Manager uses max_cll value as a limit
for brightness control.
max_cll defines the content light luminance for individual pixel.
Whereas max_fall defines frame-average level luminance.
The user may not observe the difference in brightness in between
max_fall and max_cll.
That negatively impacts the user experience.

[How]
Use max_fall value instead of max_cll as a limit for brightness control.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -2141,7 +2141,7 @@ static struct drm_mode_config_helper_fun
 
 static void update_connector_ext_caps(struct amdgpu_dm_connector *aconnector)
 {
-	u32 max_cll, min_cll, max, min, q, r;
+	u32 max_avg, min_cll, max, min, q, r;
 	struct amdgpu_dm_backlight_caps *caps;
 	struct amdgpu_display_manager *dm;
 	struct drm_connector *conn_base;
@@ -2164,7 +2164,7 @@ static void update_connector_ext_caps(st
 	caps = &dm->backlight_caps;
 	caps->ext_caps = &aconnector->dc_link->dpcd_sink_ext_caps;
 	caps->aux_support = false;
-	max_cll = conn_base->hdr_sink_metadata.hdmi_type1.max_cll;
+	max_avg = conn_base->hdr_sink_metadata.hdmi_type1.max_fall;
 	min_cll = conn_base->hdr_sink_metadata.hdmi_type1.min_cll;
 
 	if (caps->ext_caps->bits.oled == 1 /*||
@@ -2192,8 +2192,8 @@ static void update_connector_ext_caps(st
 	 * The results of the above expressions can be verified at
 	 * pre_computed_values.
 	 */
-	q = max_cll >> 5;
-	r = max_cll % 32;
+	q = max_avg >> 5;
+	r = max_avg % 32;
 	max = (1 << q) * pre_computed_values[r];
 
 	// min luminance: maxLum * (CV/255)^2 / 100

[PATCH 5.10 70/84] ext4: fix bug_on ext4_mb_use_inode_pa

[Greg Kroah-Hartman]

From: Baokun Li <libaokun1@huawei.com>

commit a08f789d2ab5242c07e716baf9a835725046be89 upstream.

Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/mballoc.c:3211!
[...]
RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f
[...]
Call Trace:
 ext4_mb_new_blocks+0x9df/0x5d30
 ext4_ext_map_blocks+0x1803/0x4d80
 ext4_map_blocks+0x3a4/0x1a10
 ext4_writepages+0x126d/0x2c30
 do_writepages+0x7f/0x1b0
 __filemap_fdatawrite_range+0x285/0x3b0
 file_write_and_wait_range+0xb1/0x140
 ext4_sync_file+0x1aa/0xca0
 vfs_fsync_range+0xfb/0x260
 do_fsync+0x48/0xa0
[...]
==================================================================

Above issue may happen as follows:
-------------------------------------
do_fsync
 vfs_fsync_range
  ext4_sync_file
   file_write_and_wait_range
    __filemap_fdatawrite_range
     do_writepages
      ext4_writepages
       mpage_map_and_submit_extent
        mpage_map_one_extent
         ext4_map_blocks
          ext4_mb_new_blocks
           ext4_mb_normalize_request
            >>> start + size <= ac->ac_o_ex.fe_logical
           ext4_mb_regular_allocator
            ext4_mb_simple_scan_group
             ext4_mb_use_best_found
              ext4_mb_new_preallocation
               ext4_mb_new_inode_pa
                ext4_mb_use_inode_pa
                 >>> set ac->ac_b_ex.fe_len <= 0
           ext4_mb_mark_diskspace_used
            >>> BUG_ON(ac->ac_b_ex.fe_len <= 0);

we can easily reproduce this problem with the following commands:
	`fallocate -l100M disk`
	`mkfs.ext4 -b 1024 -g 256 disk`
	`mount disk /mnt`
	`fsstress -d /mnt -l 0 -n 1000 -p 1`

The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP.
Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur
when the size is truncated. So start should be the start position of
the group where ac_o_ex.fe_logical is located after alignment.
In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP
is very large, the value calculated by start_off is more accurate.

Cc: stable@kernel.org
Fixes: cd648b8a8fd5 ("ext4: trim allocation requests to group size")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/mballoc.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -3520,6 +3520,15 @@ ext4_mb_normalize_request(struct ext4_al
 	size = size >> bsbits;
 	start = start_off >> bsbits;
 
+	/*
+	 * For tiny groups (smaller than 8MB) the chosen allocation
+	 * alignment may be larger than group size. Make sure the
+	 * alignment does not move allocation to a different group which
+	 * makes mballoc fail assertions later.
+	 */
+	start = max(start, rounddown(ac->ac_o_ex.fe_logical,
+			(ext4_lblk_t)EXT4_BLOCKS_PER_GROUP(ac->ac_sb)));
+
 	/* don't cover already allocated blocks in selected range */
 	if (ar->pleft && start <= ar->lleft) {
 		size -= ar->lleft + 1 - start;

[PATCH 5.10 71/84] ext4: make variable "count" signed

[Greg Kroah-Hartman]

From: Ding Xiang <dingxiang@cmss.chinamobile.com>

commit bc75a6eb856cb1507fa907bf6c1eda91b3fef52f upstream.

Since dx_make_map() may return -EFSCORRUPTED now, so change "count" to
be a signed integer so we can correctly check for an error code returned
by dx_make_map().

Fixes: 46c116b920eb ("ext4: verify dir block before splitting it")
Cc: stable@kernel.org
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220530100047.537598-1-dingxiang@cmss.chinamobile.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/namei.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1841,7 +1841,8 @@ static struct ext4_dir_entry_2 *do_split
 			struct dx_hash_info *hinfo)
 {
 	unsigned blocksize = dir->i_sb->s_blocksize;
-	unsigned count, continued;
+	unsigned continued;
+	int count;
 	struct buffer_head *bh2;
 	ext4_lblk_t newblock;
 	u32 hash2;

[PATCH 5.10 72/84] ext4: add reserved GDT blocks check

[Greg Kroah-Hartman]

From: Zhang Yi <yi.zhang@huawei.com>

commit b55c3cd102a6f48b90e61c44f7f3dda8c290c694 upstream.

We capture a NULL pointer issue when resizing a corrupt ext4 image which
is freshly clear resize_inode feature (not run e2fsck). It could be
simply reproduced by following steps. The problem is because of the
resize_inode feature was cleared, and it will convert the filesystem to
meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was
not reduced to zero, so could we mistakenly call reserve_backup_gdb()
and passing an uninitialized resize_inode to it when adding new group
descriptors.

 mkfs.ext4 /dev/sda 3G
 tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck
 mount /dev/sda /mnt
 resize2fs /dev/sda 8G

 ========
 BUG: kernel NULL pointer dereference, address: 0000000000000028
 CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748
 ...
 RIP: 0010:ext4_flex_group_add+0xe08/0x2570
 ...
 Call Trace:
  <TASK>
  ext4_resize_fs+0xbec/0x1660
  __ext4_ioctl+0x1749/0x24e0
  ext4_ioctl+0x12/0x20
  __x64_sys_ioctl+0xa6/0x110
  do_syscall_64+0x3b/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7f2dd739617b
 ========

The fix is simple, add a check in ext4_resize_begin() to make sure that
the es->s_reserved_gdt_blocks is zero when the resize_inode feature is
disabled.

Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220601092717.763694-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/resize.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -53,6 +53,16 @@ int ext4_resize_begin(struct super_block
 		return -EPERM;
 
 	/*
+	 * If the reserved GDT blocks is non-zero, the resize_inode feature
+	 * should always be set.
+	 */
+	if (EXT4_SB(sb)->s_es->s_reserved_gdt_blocks &&
+	    !ext4_has_feature_resize_inode(sb)) {
+		ext4_error(sb, "resize_inode disabled but reserved GDT blocks non-zero");
+		return -EFSCORRUPTED;
+	}
+
+	/*
 	 * If we are not using the primary superblock/GDT copy don't resize,
          * because the user tools have no way of handling this.  Probably a
          * bad time to do it anyways.

[PATCH 5.10 73/84] KVM: arm64: Dont read a HW interrupt pending state in user context

[Greg Kroah-Hartman]

From: Marc Zyngier <maz@kernel.org>

commit 2cdea19a34c2340b3aa69508804efe4e3750fcec upstream.

Since 5bfa685e62e9 ("KVM: arm64: vgic: Read HW interrupt pending state
from the HW"), we're able to source the pending bit for an interrupt
that is stored either on the physical distributor or on a device.

However, this state is only available when the vcpu is loaded,
and is not intended to be accessed from userspace. Unfortunately,
the GICv2 emulation doesn't provide specific userspace accessors,
and we fallback with the ones that are intended for the guest,
with fatal consequences.

Add a new vgic_uaccess_read_pending() accessor for userspace
to use, build on top of the existing vgic_mmio_read_pending().

Reported-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: 5bfa685e62e9 ("KVM: arm64: vgic: Read HW interrupt pending state from the HW")
Link: https://lore.kernel.org/r/20220607131427.1164881-2-maz@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kvm/vgic/vgic-mmio-v2.c |    4 ++--
 arch/arm64/kvm/vgic/vgic-mmio.c    |   19 ++++++++++++++++---
 arch/arm64/kvm/vgic/vgic-mmio.h    |    3 +++
 3 files changed, 21 insertions(+), 5 deletions(-)

--- a/arch/arm64/kvm/vgic/vgic-mmio-v2.c
+++ b/arch/arm64/kvm/vgic/vgic-mmio-v2.c
@@ -418,11 +418,11 @@ static const struct vgic_register_region
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PENDING_SET,
 		vgic_mmio_read_pending, vgic_mmio_write_spending,
-		NULL, vgic_uaccess_write_spending, 1,
+		vgic_uaccess_read_pending, vgic_uaccess_write_spending, 1,
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PENDING_CLEAR,
 		vgic_mmio_read_pending, vgic_mmio_write_cpending,
-		NULL, vgic_uaccess_write_cpending, 1,
+		vgic_uaccess_read_pending, vgic_uaccess_write_cpending, 1,
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ACTIVE_SET,
 		vgic_mmio_read_active, vgic_mmio_write_sactive,
--- a/arch/arm64/kvm/vgic/vgic-mmio.c
+++ b/arch/arm64/kvm/vgic/vgic-mmio.c
@@ -226,8 +226,9 @@ int vgic_uaccess_write_cenable(struct kv
 	return 0;
 }
 
-unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
-				     gpa_t addr, unsigned int len)
+static unsigned long __read_pending(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len,
+				    bool is_user)
 {
 	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
 	u32 value = 0;
@@ -248,7 +249,7 @@ unsigned long vgic_mmio_read_pending(str
 						    IRQCHIP_STATE_PENDING,
 						    &val);
 			WARN_RATELIMIT(err, "IRQ %d", irq->host_irq);
-		} else if (vgic_irq_is_mapped_level(irq)) {
+		} else if (!is_user && vgic_irq_is_mapped_level(irq)) {
 			val = vgic_get_phys_line_level(irq);
 		} else {
 			val = irq_is_pending(irq);
@@ -263,6 +264,18 @@ unsigned long vgic_mmio_read_pending(str
 	return value;
 }
 
+unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
+				     gpa_t addr, unsigned int len)
+{
+	return __read_pending(vcpu, addr, len, false);
+}
+
+unsigned long vgic_uaccess_read_pending(struct kvm_vcpu *vcpu,
+					gpa_t addr, unsigned int len)
+{
+	return __read_pending(vcpu, addr, len, true);
+}
+
 static bool is_vgic_v2_sgi(struct kvm_vcpu *vcpu, struct vgic_irq *irq)
 {
 	return (vgic_irq_is_sgi(irq->intid) &&
--- a/arch/arm64/kvm/vgic/vgic-mmio.h
+++ b/arch/arm64/kvm/vgic/vgic-mmio.h
@@ -149,6 +149,9 @@ int vgic_uaccess_write_cenable(struct kv
 unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
 				     gpa_t addr, unsigned int len);
 
+unsigned long vgic_uaccess_read_pending(struct kvm_vcpu *vcpu,
+					gpa_t addr, unsigned int len);
+
 void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
 			      gpa_t addr, unsigned int len,
 			      unsigned long val);

[PATCH 5.10 74/84] KVM: x86: Account a variety of miscellaneous allocations

[Greg Kroah-Hartman]

From: Sean Christopherson <seanjc@google.com>

commit eba04b20e4861d9bdbd8470a13c0c6e824521a36 upstream.

Switch to GFP_KERNEL_ACCOUNT for a handful of allocations that are
clearly associated with a single task/VM.

Note, there are a several SEV allocations that aren't accounted, but
those can (hopefully) be fixed by using the local stack for memory.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210331023025.2485960-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/svm/nested.c |    4 ++--
 arch/x86/kvm/svm/sev.c    |    2 +-
 arch/x86/kvm/vmx/vmx.c    |    2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

--- a/arch/x86/kvm/svm/nested.c
+++ b/arch/x86/kvm/svm/nested.c
@@ -1198,8 +1198,8 @@ static int svm_set_nested_state(struct k
 		return -EINVAL;
 
 	ret  = -ENOMEM;
-	ctl  = kzalloc(sizeof(*ctl),  GFP_KERNEL);
-	save = kzalloc(sizeof(*save), GFP_KERNEL);
+	ctl  = kzalloc(sizeof(*ctl),  GFP_KERNEL_ACCOUNT);
+	save = kzalloc(sizeof(*save), GFP_KERNEL_ACCOUNT);
 	if (!ctl || !save)
 		goto out_free;
 
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -537,7 +537,7 @@ static int sev_launch_measure(struct kvm
 		}
 
 		ret = -ENOMEM;
-		blob = kmalloc(params.len, GFP_KERNEL);
+		blob = kmalloc(params.len, GFP_KERNEL_ACCOUNT);
 		if (!blob)
 			goto e_free;
 
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -619,7 +619,7 @@ static int hv_enable_direct_tlbflush(str
 	 * evmcs in singe VM shares same assist page.
 	 */
 	if (!*p_hv_pa_pg)
-		*p_hv_pa_pg = kzalloc(PAGE_SIZE, GFP_KERNEL);
+		*p_hv_pa_pg = kzalloc(PAGE_SIZE, GFP_KERNEL_ACCOUNT);
 
 	if (!*p_hv_pa_pg)
 		return -ENOMEM;

[PATCH 5.10 75/84] KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak

[Greg Kroah-Hartman]

From: Ashish Kalra <ashish.kalra@amd.com>

commit d22d2474e3953996f03528b84b7f52cc26a39403 upstream.

For some sev ioctl interfaces, the length parameter that is passed maybe
less than or equal to SEV_FW_BLOB_MAX_SIZE, but larger than the data
that PSP firmware returns. In this case, kmalloc will allocate memory
that is the size of the input rather than the size of the data.
Since PSP firmware doesn't fully overwrite the allocated buffer, these
sev ioctl interface may return uninitialized kernel slab memory.

Reported-by: Andy Nguyen <theflow@google.com>
Suggested-by: David Rientjes <rientjes@google.com>
Suggested-by: Peter Gonda <pgonda@google.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Fixes: eaf78265a4ab3 ("KVM: SVM: Move SEV code to separate file")
Fixes: 2c07ded06427d ("KVM: SVM: add support for SEV attestation command")
Fixes: 4cfdd47d6d95a ("KVM: SVM: Add KVM_SEV SEND_START command")
Fixes: d3d1af85e2c75 ("KVM: SVM: Add KVM_SEND_UPDATE_DATA command")
Fixes: eba04b20e4861 ("KVM: x86: Account a variety of miscellaneous allocations")
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Peter Gonda <pgonda@google.com>
Message-Id: <20220516154310.3685678-1-Ashish.Kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/svm/sev.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -537,7 +537,7 @@ static int sev_launch_measure(struct kvm
 		}
 
 		ret = -ENOMEM;
-		blob = kmalloc(params.len, GFP_KERNEL_ACCOUNT);
+		blob = kzalloc(params.len, GFP_KERNEL_ACCOUNT);
 		if (!blob)
 			goto e_free;
 
@@ -676,7 +676,7 @@ static int __sev_dbg_decrypt_user(struct
 	if (!IS_ALIGNED(dst_paddr, 16) ||
 	    !IS_ALIGNED(paddr,     16) ||
 	    !IS_ALIGNED(size,      16)) {
-		tpage = (void *)alloc_page(GFP_KERNEL);
+		tpage = (void *)alloc_page(GFP_KERNEL | __GFP_ZERO);
 		if (!tpage)
 			return -ENOMEM;
 

[PATCH 5.10 76/84] ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machine

[Greg Kroah-Hartman]

From: Andy Chi <andy.chi@canonical.com>

commit 024a7ad9eb4df626ca8c77fef4f67fd0ebd559d2 upstream.

The HP EliteBook 630 is using ALC236 codec which used 0x02 to control mute LED
and 0x01 to control micmute LED. Therefore, add a quirk to make it works.

Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220513121648.28584-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8793,6 +8793,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x103c, 0x8873, "HP ZBook Studio 15.6 Inch G8 Mobile Workstation PC", ALC285_FIXUP_HP_GPIO_AMP_INIT),
 	SND_PCI_QUIRK(0x103c, 0x888d, "HP ZBook Power 15.6 inch G8 Mobile Workstation PC", ALC236_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8896, "HP EliteBook 855 G8 Notebook PC", ALC285_FIXUP_HP_MUTE_LED),
+	SND_PCI_QUIRK(0x103c, 0x89aa, "HP EliteBook 630 G9", ALC236_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x1043, 0x103e, "ASUS X540SA", ALC256_FIXUP_ASUS_MIC),
 	SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300),
 	SND_PCI_QUIRK(0x1043, 0x106d, "Asus K53BE", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),

[PATCH 5.10 77/84] virtio-pci: Remove wrong address verification in vp_del_vqs()

[Greg Kroah-Hartman]

From: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>

commit 7e415282b41bf0d15c6e0fe268f822d9b083f2f7 upstream.

GCC 12 enhanced -Waddress when comparing array address to null [0],
which warns:

    drivers/virtio/virtio_pci_common.c: In function ‘vp_del_vqs’:
    drivers/virtio/virtio_pci_common.c:257:29: warning: the comparison will always evaluate as ‘true’ for the pointer operand in ‘vp_dev->msix_affinity_masks + (sizetype)((long unsigned int)i * 256)’ must not be NULL [-Waddress]
      257 |                         if (vp_dev->msix_affinity_masks[i])
          |                             ^~~~~~

In fact, the verification is comparing the result of a pointer
arithmetic, the address "msix_affinity_masks + i", which will always
evaluate to true.

Under the hood, free_cpumask_var() calls kfree(), which is safe to pass
NULL, not requiring non-null verification.  So remove the verification
to make compiler happy (happy compiler, happy life).

[0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=102103

Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Message-Id: <20220415023002.49805-1-muriloo@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Christophe de Dinechin <dinechin@redhat.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/virtio/virtio_pci_common.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/virtio/virtio_pci_common.c
+++ b/drivers/virtio/virtio_pci_common.c
@@ -254,8 +254,7 @@ void vp_del_vqs(struct virtio_device *vd
 
 	if (vp_dev->msix_affinity_masks) {
 		for (i = 0; i < vp_dev->msix_vectors; i++)
-			if (vp_dev->msix_affinity_masks[i])
-				free_cpumask_var(vp_dev->msix_affinity_masks[i]);
+			free_cpumask_var(vp_dev->msix_affinity_masks[i]);
 	}
 
 	if (vp_dev->msix_enabled) {

[PATCH 5.10 78/84] dma-direct: dont over-decrypt memory

[Greg Kroah-Hartman]

From: Robin Murphy <robin.murphy@arm.com>

commit 4a37f3dd9a83186cb88d44808ab35b78375082c9 upstream.

The original x86 sev_alloc() only called set_memory_decrypted() on
memory returned by alloc_pages_node(), so the page order calculation
fell out of that logic. However, the common dma-direct code has several
potential allocators, not all of which are guaranteed to round up the
underlying allocation to a power-of-two size, so carrying over that
calculation for the encryption/decryption size was a mistake. Fix it by
rounding to a *number* of pages, rather than an order.

Until recently there was an even worse interaction with DMA_DIRECT_REMAP
where we could have ended up decrypting part of the next adjacent
vmalloc area, only averted by no architecture actually supporting both
configs at once. Don't ask how I found that one out...

Fixes: c10f07aa27da ("dma/direct: Handle force decryption for DMA coherent buffers in common code")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Rientjes <rientjes@google.com>
[ backport the functional change without all the prior refactoring ]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/dma/direct.c |   16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

--- a/kernel/dma/direct.c
+++ b/kernel/dma/direct.c
@@ -188,7 +188,7 @@ void *dma_direct_alloc(struct device *de
 			goto out_free_pages;
 		if (force_dma_unencrypted(dev)) {
 			err = set_memory_decrypted((unsigned long)ret,
-						   1 << get_order(size));
+						   PFN_UP(size));
 			if (err)
 				goto out_free_pages;
 		}
@@ -210,7 +210,7 @@ void *dma_direct_alloc(struct device *de
 	ret = page_address(page);
 	if (force_dma_unencrypted(dev)) {
 		err = set_memory_decrypted((unsigned long)ret,
-					   1 << get_order(size));
+					   PFN_UP(size));
 		if (err)
 			goto out_free_pages;
 	}
@@ -231,7 +231,7 @@ done:
 out_encrypt_pages:
 	if (force_dma_unencrypted(dev)) {
 		err = set_memory_encrypted((unsigned long)page_address(page),
-					   1 << get_order(size));
+					   PFN_UP(size));
 		/* If memory cannot be re-encrypted, it must be leaked */
 		if (err)
 			return NULL;
@@ -244,8 +244,6 @@ out_free_pages:
 void dma_direct_free(struct device *dev, size_t size,
 		void *cpu_addr, dma_addr_t dma_addr, unsigned long attrs)
 {
-	unsigned int page_order = get_order(size);
-
 	if ((attrs & DMA_ATTR_NO_KERNEL_MAPPING) &&
 	    !force_dma_unencrypted(dev)) {
 		/* cpu_addr is a struct page cookie, not a kernel address */
@@ -266,7 +264,7 @@ void dma_direct_free(struct device *dev,
 		return;
 
 	if (force_dma_unencrypted(dev))
-		set_memory_encrypted((unsigned long)cpu_addr, 1 << page_order);
+		set_memory_encrypted((unsigned long)cpu_addr, PFN_UP(size));
 
 	if (IS_ENABLED(CONFIG_DMA_REMAP) && is_vmalloc_addr(cpu_addr))
 		vunmap(cpu_addr);
@@ -302,8 +300,7 @@ struct page *dma_direct_alloc_pages(stru
 
 	ret = page_address(page);
 	if (force_dma_unencrypted(dev)) {
-		if (set_memory_decrypted((unsigned long)ret,
-				1 << get_order(size)))
+		if (set_memory_decrypted((unsigned long)ret, PFN_UP(size)))
 			goto out_free_pages;
 	}
 	memset(ret, 0, size);
@@ -318,7 +315,6 @@ void dma_direct_free_pages(struct device
 		struct page *page, dma_addr_t dma_addr,
 		enum dma_data_direction dir)
 {
-	unsigned int page_order = get_order(size);
 	void *vaddr = page_address(page);
 
 	/* If cpu_addr is not from an atomic pool, dma_free_from_pool() fails */
@@ -327,7 +323,7 @@ void dma_direct_free_pages(struct device
 		return;
 
 	if (force_dma_unencrypted(dev))
-		set_memory_encrypted((unsigned long)vaddr, 1 << page_order);
+		set_memory_encrypted((unsigned long)vaddr, PFN_UP(size));
 
 	dma_free_contiguous(dev, page, size);
 }

[PATCH 5.10 79/84] net/sched: act_police: more accurate MTU policing

[Greg Kroah-Hartman]

From: Davide Caratti <dcaratti@redhat.com>

commit 4ddc844eb81da59bfb816d8d52089aba4e59e269 upstream.

in current Linux, MTU policing does not take into account that packets at
the TC ingress have the L2 header pulled. Thus, the same TC police action
(with the same value of tcfp_mtu) behaves differently for ingress/egress.
In addition, the full GSO size is compared to tcfp_mtu: as a consequence,
the policer drops GSO packets even when individual segments have the L2 +
L3 + L4 + payload length below the configured valued of tcfp_mtu.

Improve the accuracy of MTU policing as follows:
 - account for mac_len for non-GSO packets at TC ingress.
 - compare MTU threshold with the segmented size for GSO packets.
Also, add a kselftest that verifies the correct behavior.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[dcaratti: fix conflicts due to lack of the following commits:
 - commit 2ffe0395288a ("net/sched: act_police: add support for
   packet-per-second policing")
 - commit 53b61f29367d ("selftests: forwarding: Add tc-police tests for
   packets per second")]
Link: https://lore.kernel.org/netdev/876d597a0ff55f6ba786f73c5a9fd9eb8d597a03.1644514748.git.dcaratti@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/act_police.c                              |   16 +++++-
 tools/testing/selftests/net/forwarding/tc_police.sh |   52 ++++++++++++++++++++
 2 files changed, 67 insertions(+), 1 deletion(-)

--- a/net/sched/act_police.c
+++ b/net/sched/act_police.c
@@ -213,6 +213,20 @@ release_idr:
 	return err;
 }
 
+static bool tcf_police_mtu_check(struct sk_buff *skb, u32 limit)
+{
+	u32 len;
+
+	if (skb_is_gso(skb))
+		return skb_gso_validate_mac_len(skb, limit);
+
+	len = qdisc_pkt_len(skb);
+	if (skb_at_tc_ingress(skb))
+		len += skb->mac_len;
+
+	return len <= limit;
+}
+
 static int tcf_police_act(struct sk_buff *skb, const struct tc_action *a,
 			  struct tcf_result *res)
 {
@@ -235,7 +249,7 @@ static int tcf_police_act(struct sk_buff
 			goto inc_overlimits;
 	}
 
-	if (qdisc_pkt_len(skb) <= p->tcfp_mtu) {
+	if (tcf_police_mtu_check(skb, p->tcfp_mtu)) {
 		if (!p->rate_present) {
 			ret = p->tcfp_result;
 			goto end;
--- a/tools/testing/selftests/net/forwarding/tc_police.sh
+++ b/tools/testing/selftests/net/forwarding/tc_police.sh
@@ -35,6 +35,8 @@ ALL_TESTS="
 	police_shared_test
 	police_rx_mirror_test
 	police_tx_mirror_test
+	police_mtu_rx_test
+	police_mtu_tx_test
 "
 NUM_NETIFS=6
 source tc_common.sh
@@ -290,6 +292,56 @@ police_tx_mirror_test()
 	police_mirror_common_test $rp2 egress "police tx and mirror"
 }
 
+police_mtu_common_test() {
+	RET=0
+
+	local test_name=$1; shift
+	local dev=$1; shift
+	local direction=$1; shift
+
+	tc filter add dev $dev $direction protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action police mtu 1042 conform-exceed drop/ok
+
+	# to count "conform" packets
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action drop
+
+	mausezahn $h1 -a own -b $(mac_get $rp1) -A 192.0.2.1 -B 198.51.100.1 \
+		-t udp sp=12345,dp=54321 -p 1001 -c 10 -q
+
+	mausezahn $h1 -a own -b $(mac_get $rp1) -A 192.0.2.1 -B 198.51.100.1 \
+		-t udp sp=12345,dp=54321 -p 1000 -c 3 -q
+
+	tc_check_packets "dev $dev $direction" 101 13
+	check_err $? "wrong packet counter"
+
+	# "exceed" packets
+	local overlimits_t0=$(tc_rule_stats_get ${dev} 1 ${direction} .overlimits)
+	test ${overlimits_t0} = 10
+	check_err $? "wrong overlimits, expected 10 got ${overlimits_t0}"
+
+	# "conform" packets
+	tc_check_packets "dev $h2 ingress" 101 3
+	check_err $? "forwarding error"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $dev $direction protocol ip pref 1 handle 101 flower
+
+	log_test "$test_name"
+}
+
+police_mtu_rx_test()
+{
+	police_mtu_common_test "police mtu (rx)" $rp1 ingress
+}
+
+police_mtu_tx_test()
+{
+	police_mtu_common_test "police mtu (tx)" $rp2 egress
+}
+
 setup_prepare()
 {
 	h1=${NETIFS[p1]}

[PATCH 5.10 80/84] net: openvswitch: fix misuse of the cached connection on tuple changes

[Greg Kroah-Hartman]

From: Ilya Maximets <i.maximets@ovn.org>

commit 2061ecfdf2350994e5b61c43e50e98a7a70e95ee upstream.

If packet headers changed, the cached nfct is no longer relevant
for the packet and attempt to re-use it leads to the incorrect packet
classification.

This issue is causing broken connectivity in OpenStack deployments
with OVS/OVN due to hairpin traffic being unexpectedly dropped.

The setup has datapath flows with several conntrack actions and tuple
changes between them:

  actions:ct(commit,zone=8,mark=0/0x1,nat(src)),
          set(eth(src=00:00:00:00:00:01,dst=00:00:00:00:00:06)),
          set(ipv4(src=172.18.2.10,dst=192.168.100.6,ttl=62)),
          ct(zone=8),recirc(0x4)

After the first ct() action the packet headers are almost fully
re-written.  The next ct() tries to re-use the existing nfct entry
and marks the packet as invalid, so it gets dropped later in the
pipeline.

Clearing the cached conntrack entry whenever packet tuple is changed
to avoid the issue.

The flow key should not be cleared though, because we should still
be able to match on the ct_state if the recirculation happens after
the tuple change but before the next ct() action.

Cc: stable@vger.kernel.org
Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action")
Reported-by: Frode Nordahl <frode.nordahl@canonical.com>
Link: https://mail.openvswitch.org/pipermail/ovs-discuss/2022-May/051829.html
Link: https://bugs.launchpad.net/ubuntu/+source/ovn/+bug/1967856
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://lore.kernel.org/r/20220606221140.488984-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Backport to 5.10: minor rebase in ovs_ct_clear function.
 This version also applicable to and tested on 5.4 and 4.19.]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/openvswitch/actions.c   |    6 ++++++
 net/openvswitch/conntrack.c |    3 ++-
 2 files changed, 8 insertions(+), 1 deletion(-)

--- a/net/openvswitch/actions.c
+++ b/net/openvswitch/actions.c
@@ -372,6 +372,7 @@ static void set_ip_addr(struct sk_buff *
 	update_ip_l4_checksum(skb, nh, *addr, new_addr);
 	csum_replace4(&nh->check, *addr, new_addr);
 	skb_clear_hash(skb);
+	ovs_ct_clear(skb, NULL);
 	*addr = new_addr;
 }
 
@@ -419,6 +420,7 @@ static void set_ipv6_addr(struct sk_buff
 		update_ipv6_checksum(skb, l4_proto, addr, new_addr);
 
 	skb_clear_hash(skb);
+	ovs_ct_clear(skb, NULL);
 	memcpy(addr, new_addr, sizeof(__be32[4]));
 }
 
@@ -659,6 +661,7 @@ static int set_nsh(struct sk_buff *skb,
 static void set_tp_port(struct sk_buff *skb, __be16 *port,
 			__be16 new_port, __sum16 *check)
 {
+	ovs_ct_clear(skb, NULL);
 	inet_proto_csum_replace2(check, skb, *port, new_port, false);
 	*port = new_port;
 }
@@ -698,6 +701,7 @@ static int set_udp(struct sk_buff *skb,
 		uh->dest = dst;
 		flow_key->tp.src = src;
 		flow_key->tp.dst = dst;
+		ovs_ct_clear(skb, NULL);
 	}
 
 	skb_clear_hash(skb);
@@ -760,6 +764,8 @@ static int set_sctp(struct sk_buff *skb,
 	sh->checksum = old_csum ^ old_correct_csum ^ new_csum;
 
 	skb_clear_hash(skb);
+	ovs_ct_clear(skb, NULL);
+
 	flow_key->tp.src = sh->source;
 	flow_key->tp.dst = sh->dest;
 
--- a/net/openvswitch/conntrack.c
+++ b/net/openvswitch/conntrack.c
@@ -1324,7 +1324,8 @@ int ovs_ct_clear(struct sk_buff *skb, st
 	if (skb_nfct(skb)) {
 		nf_conntrack_put(skb_nfct(skb));
 		nf_ct_set(skb, NULL, IP_CT_UNTRACKED);
-		ovs_ct_fill_key(skb, key);
+		if (key)
+			ovs_ct_fill_key(skb, key);
 	}
 
 	return 0;

[PATCH 5.10 81/84] Revert "PCI: Make pci_enable_ptm() private"

[Greg Kroah-Hartman]

From: Vinicius Costa Gomes <vinicius.gomes@intel.com>

commit 1d71eb53e45187f58089d32b51e27784c791d90e upstream.

Make pci_enable_ptm() accessible from the drivers.

Exposing this to the driver enables the driver to use the
'ptm_enabled' field of 'pci_dev' to check if PTM is enabled or not.

This reverts commit ac6c26da29c1 ("PCI: Make pci_enable_ptm() private").

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/pci.h   |    3 ---
 include/linux/pci.h |    7 +++++++
 2 files changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -585,11 +585,8 @@ static inline void pcie_ecrc_get_policy(
 
 #ifdef CONFIG_PCIE_PTM
 void pci_ptm_init(struct pci_dev *dev);
-int pci_enable_ptm(struct pci_dev *dev, u8 *granularity);
 #else
 static inline void pci_ptm_init(struct pci_dev *dev) { }
-static inline int pci_enable_ptm(struct pci_dev *dev, u8 *granularity)
-{ return -EINVAL; }
 #endif
 
 struct pci_dev_reset_methods {
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1599,6 +1599,13 @@ static inline bool pci_aer_available(voi
 
 bool pci_ats_disabled(void);
 
+#ifdef CONFIG_PCIE_PTM
+int pci_enable_ptm(struct pci_dev *dev, u8 *granularity);
+#else
+static inline int pci_enable_ptm(struct pci_dev *dev, u8 *granularity)
+{ return -EINVAL; }
+#endif
+
 void pci_cfg_access_lock(struct pci_dev *dev);
 bool pci_cfg_access_trylock(struct pci_dev *dev);
 void pci_cfg_access_unlock(struct pci_dev *dev);

[PATCH 5.10 82/84] igc: Enable PCIe PTM

[Greg Kroah-Hartman]

From: Vinicius Costa Gomes <vinicius.gomes@intel.com>

commit 1b5d73fb862414106cf270a1a7300ce8ae77de83 upstream.

Enables PCIe PTM (Precision Time Measurement) support in the igc
driver. Notifies the PCI devices that PCIe PTM should be enabled.

PCIe PTM is similar protocol to PTP (Precision Time Protocol) running
in the PCIe fabric, it allows devices to report time measurements from
their internal clocks and the correlation with the PCIe root clock.

The i225 NIC exposes some registers that expose those time
measurements, those registers will be used, in later patches, to
implement the PTP_SYS_OFFSET_PRECISE ioctl().

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/igc/igc_main.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -9,6 +9,7 @@
 #include <linux/udp.h>
 #include <linux/ip.h>
 #include <linux/pm_runtime.h>
+#include <linux/pci.h>
 #include <net/pkt_sched.h>
 
 #include <net/ipv6.h>
@@ -5041,6 +5042,10 @@ static int igc_probe(struct pci_dev *pde
 
 	pci_enable_pcie_error_reporting(pdev);
 
+	err = pci_enable_ptm(pdev, NULL);
+	if (err < 0)
+		dev_info(&pdev->dev, "PCIe PTM not supported by PCIe bus/controller\n");
+
 	pci_set_master(pdev);
 
 	err = -ENOMEM;

[PATCH 5.10 83/84] powerpc/book3e: get rid of #include <generated/compile.h>

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

commit 7ad4bd887d27c6b6ffbef216f19c19f8fe2b8f52 upstream.

You cannot include <generated/compile.h> here because it is generated
in init/Makefile but there is no guarantee that it happens before
arch/powerpc/mm/nohash/kaslr_booke.c is compiled for parallel builds.

The places where you can reliably include <generated/compile.h> are:

  - init/          (because init/Makefile can specify the dependency)
  - arch/*/boot/   (because it is compiled after vmlinux)

Commit f231e4333312 ("hexagon: get rid of #include <generated/compile.h>")
fixed the last breakage at that time, but powerpc re-added this.

<generated/compile.h> was unneeded because 'build_str' is almost the
same as 'linux_banner' defined in init/version.c

Let's copy the solution from MIPS.
(get_random_boot() in arch/mips/kernel/relocate.c)

Fixes: 6a38ea1d7b94 ("powerpc/fsl_booke/32: randomize the kernel image offset")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220604085050.4078927-1-masahiroy@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/mm/nohash/kaslr_booke.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

--- a/arch/powerpc/mm/nohash/kaslr_booke.c
+++ b/arch/powerpc/mm/nohash/kaslr_booke.c
@@ -18,7 +18,6 @@
 #include <asm/prom.h>
 #include <asm/kdump.h>
 #include <mm/mmu_decl.h>
-#include <generated/compile.h>
 #include <generated/utsrelease.h>
 
 struct regions {
@@ -36,10 +35,6 @@ struct regions {
 	int reserved_mem_size_cells;
 };
 
-/* Simplified build-specific string for starting entropy. */
-static const char build_str[] = UTS_RELEASE " (" LINUX_COMPILE_BY "@"
-		LINUX_COMPILE_HOST ") (" LINUX_COMPILER ") " UTS_VERSION;
-
 struct regions __initdata regions;
 
 static __init void kaslr_get_cmdline(void *fdt)
@@ -72,7 +67,8 @@ static unsigned long __init get_boot_see
 {
 	unsigned long hash = 0;
 
-	hash = rotate_xor(hash, build_str, sizeof(build_str));
+	/* build-specific string for starting entropy. */
+	hash = rotate_xor(hash, linux_banner, strlen(linux_banner));
 	hash = rotate_xor(hash, fdt, fdt_totalsize(fdt));
 
 	return hash;

[PATCH 5.10 84/84] clk: imx8mp: fix usb_root_clk parent

[Greg Kroah-Hartman]

From: Peng Fan <peng.fan@nxp.com>

commit cf7f3f4fa9e57b8e9f594823e77e6cbb0ce2b254 upstream.

According to reference mannual CCGR77(usb) sources from hsio_axi, fix
it.

Fixes: 9c140d9926761 ("clk: imx: Add support for i.MX8MP clock driver")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220507125430.793287-1-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/imx/clk-imx8mp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/clk/imx/clk-imx8mp.c
+++ b/drivers/clk/imx/clk-imx8mp.c
@@ -691,7 +691,7 @@ static int imx8mp_clocks_probe(struct pl
 	hws[IMX8MP_CLK_UART2_ROOT] = imx_clk_hw_gate4("uart2_root_clk", "uart2", ccm_base + 0x44a0, 0);
 	hws[IMX8MP_CLK_UART3_ROOT] = imx_clk_hw_gate4("uart3_root_clk", "uart3", ccm_base + 0x44b0, 0);
 	hws[IMX8MP_CLK_UART4_ROOT] = imx_clk_hw_gate4("uart4_root_clk", "uart4", ccm_base + 0x44c0, 0);
-	hws[IMX8MP_CLK_USB_ROOT] = imx_clk_hw_gate4("usb_root_clk", "osc_32k", ccm_base + 0x44d0, 0);
+	hws[IMX8MP_CLK_USB_ROOT] = imx_clk_hw_gate4("usb_root_clk", "hsio_axi", ccm_base + 0x44d0, 0);
 	hws[IMX8MP_CLK_USB_PHY_ROOT] = imx_clk_hw_gate4("usb_phy_root_clk", "usb_phy_ref", ccm_base + 0x44f0, 0);
 	hws[IMX8MP_CLK_USDHC1_ROOT] = imx_clk_hw_gate4("usdhc1_root_clk", "usdhc1", ccm_base + 0x4510, 0);
 	hws[IMX8MP_CLK_USDHC2_ROOT] = imx_clk_hw_gate4("usdhc2_root_clk", "usdhc2", ccm_base + 0x4520, 0);

Re: [PATCH 5.10 00/84] 5.10.124-rc1 review

[Florian Fainelli]

On 6/20/22 05:50, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.124 release.
> There are 84 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 22 Jun 2022 12:47:02 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.124-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.10 00/84] 5.10.124-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 642 bytes --]

Hi!

> This is the start of the stable review cycle for the 5.10.124 release.
> There are 84 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel
--
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

RE: [PATCH 5.10 00/84] 5.10.124-rc1 review

[Fox Chen]

On Mon, 20 Jun 2022 14:50:23 +0200, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 5.10.124 release.
> There are 84 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 22 Jun 2022 12:47:02 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.124-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

5.10.124-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
                
Tested-by: Fox Chen <foxhlchen@gmail.com>

Re: [PATCH 5.10 00/84] 5.10.124-rc1 review

[Guenter Roeck]

On Mon, Jun 20, 2022 at 02:50:23PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.124 release.
> There are 84 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 22 Jun 2022 12:47:02 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 163 pass: 163 fail: 0
Qemu test results:
	total: 477 pass: 477 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.10 00/84] 5.10.124-rc1 review

[Samuel Zou]

On 2022/6/20 20:50, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.124 release.
> There are 84 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 22 Jun 2022 12:47:02 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.124-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 5.10.124-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.10.y
Version: 5.10.124-rc1
Commit: dfe40094a275c7d172a34fa3ad984649b36c2c88
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9095
passed: 9095
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9095
passed: 9095
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>

Re: [PATCH 5.10 00/84] 5.10.124-rc1 review

[Naresh Kamboju]

On Mon, 20 Jun 2022 at 18:31, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.10.124 release.
> There are 84 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 22 Jun 2022 12:47:02 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.124-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.10.124-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.10.y
* git commit: 1432bd558ac04fc517d64312c7d2e7fbb4a76dee
* git describe: v5.10.123-85-g1432bd558ac0
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.123-85-g1432bd558ac0

## Test Regressions (compared to v5.10.118)
No test regressions found.

## Metric Regressions (compared to v5.10.118)
No metric regressions found.

## Test Fixes (compared to v5.10.118)
No test fixes found.

## Metric Fixes (compared to v5.10.118)
No metric fixes found.

## Test result summary
total: 128188, pass: 115128, fail: 258, skip: 12239, xfail: 563

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 314 total, 314 passed, 0 failed
* arm64: 58 total, 58 passed, 0 failed
* i386: 52 total, 49 passed, 3 failed
* mips: 37 total, 37 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 51 total, 51 passed, 0 failed
* riscv: 27 total, 27 passed, 0 failed
* s390: 21 total, 21 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 56 total, 55 passed, 1 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-cap_bounds-tests
* ltp-commands
* ltp-commands-tests
* ltp-containers
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests
* ltp-fcntl-locktests-tests
* ltp-filecaps
* ltp-filecaps-tests
* ltp-fs
* ltp-fs-tests
* ltp-fs_bind
* ltp-fs_bind-tests
* ltp-fs_perms_simple
* ltp-fs_perms_simple-tests
* ltp-fsx
* ltp-fsx-tests
* ltp-hugetlb
* ltp-hugetlb-tests
* ltp-io
* ltp-io-tests
* ltp-ipc
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty
* ltp-pty-tests
* ltp-sched
* ltp-sched-tests
* ltp-securebits
* ltp-securebits-tests
* ltp-smoke
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* ssuite
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.10 00/84] 5.10.124-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Mon, Jun 20, 2022 at 02:50:23PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.124 release.
> There are 84 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 22 Jun 2022 12:47:02 +0000.
> Anything received after that time might be too late.

Build test (gcc version 11.3.1 20220612):
mips: 63 configs -> no failure
arm: 104 configs -> no failure
arm64: 3 configs -> no failure
x86_64: 4 configs -> no failure
alpha allmodconfig -> no failure
powerpc allmodconfig -> no failure
riscv allmodconfig -> no failure
s390 allmodconfig -> no failure
xtensa allmodconfig -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]

[1]. https://openqa.qa.codethink.co.uk/tests/1361
[2]. https://openqa.qa.codethink.co.uk/tests/1364


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip

Re: [PATCH 5.10 00/84] 5.10.124-rc1 review

[Jon Hunter]

On 20/06/2022 13:50, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.124 release.
> There are 84 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 22 Jun 2022 12:47:02 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.124-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h


No new regressions for Tegra ...

Test results for stable-v5.10:
     10 builds:	10 pass, 0 fail
     28 boots:	28 pass, 0 fail
     75 tests:	74 pass, 1 fail

Linux version:	5.10.124-rc1-g1432bd558ac0
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                 tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                 tegra20-ventana, tegra210-p2371-2180,
                 tegra210-p3450-0000, tegra30-cardhu-a04

Test failures:	tegra194-p2972-0000: boot.py

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon
-- 
nvpublic

Re: [PATCH 5.10 00/84] 5.10.124-rc1 review

[Shuah Khan]

On 6/20/22 6:50 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.124 release.
> There are 84 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 22 Jun 2022 12:47:02 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.124-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah