* [LTP] [0/3] openposix: Fix installation file layout @ 2022-06-27 12:53 Joerg Vehlow 2022-06-27 12:53 ` [LTP] [PATCH 1/3] openposix: Fix existence test for local flag-files Joerg Vehlow ` (2 more replies) 0 siblings, 3 replies; 12+ messages in thread From: Joerg Vehlow @ 2022-06-27 12:53 UTC (permalink / raw) To: ltp, chrubis as described in my RFC, here is a first implementation of a fixed installation layout for open posix tests. I implemented this using autoconf, to be able to specify the installation location of the tests. If build standalone, the open posix tests are still installed to /opt/open_posix_testsuite/{conformance,functional,stress}, but when installed as part of ltp, they are installed to /opt/ltp/testcases/open_posix_testsuite/* Joerg -- Mailing list info: https://lists.linux.it/listinfo/ltp ^ permalink raw reply [flat|nested] 12+ messages in thread
* [LTP] [PATCH 1/3] openposix: Fix existence test for local flag-files 2022-06-27 12:53 [LTP] [0/3] openposix: Fix installation file layout Joerg Vehlow @ 2022-06-27 12:53 ` Joerg Vehlow 2022-06-27 12:53 ` [LTP] [PATCH 2/3] openposix: Setup autoconf and fix installation layout Joerg Vehlow 2022-06-27 12:53 ` [LTP] [PATCH 3/3] configure: Integrate open posix testsuite configure Joerg Vehlow 2 siblings, 0 replies; 12+ messages in thread From: Joerg Vehlow @ 2022-06-27 12:53 UTC (permalink / raw) To: ltp, chrubis; +Cc: Joerg Vehlow From: Joerg Vehlow <joerg.vehlow@aox.de> Signed-off-by: Joerg Vehlow <joerg.vehlow@aox.de> --- testcases/open_posix_testsuite/scripts/generate-makefiles.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/testcases/open_posix_testsuite/scripts/generate-makefiles.sh b/testcases/open_posix_testsuite/scripts/generate-makefiles.sh index 5cfb8e38c..3234aa454 100755 --- a/testcases/open_posix_testsuite/scripts/generate-makefiles.sh +++ b/testcases/open_posix_testsuite/scripts/generate-makefiles.sh @@ -136,7 +136,7 @@ EOF EOF for var in CFLAGS LDFLAGS LDLIBS; do - if [ -f "${TOP_SRCDIR}/$var" ]; then + if [ -f "${prereq_cache_dir}/$var" ]; then cat >> "$makefile.1" <<EOF ${var}+= `cat "${prereq_cache_dir}/${var}" 2>/dev/null` EOF -- 2.25.1 -- Mailing list info: https://lists.linux.it/listinfo/ltp ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [LTP] [PATCH 2/3] openposix: Setup autoconf and fix installation layout 2022-06-27 12:53 [LTP] [0/3] openposix: Fix installation file layout Joerg Vehlow 2022-06-27 12:53 ` [LTP] [PATCH 1/3] openposix: Fix existence test for local flag-files Joerg Vehlow @ 2022-06-27 12:53 ` Joerg Vehlow 2022-07-05 5:57 ` Richard Palethorpe 2022-06-27 12:53 ` [LTP] [PATCH 3/3] configure: Integrate open posix testsuite configure Joerg Vehlow 2 siblings, 1 reply; 12+ messages in thread From: Joerg Vehlow @ 2022-06-27 12:53 UTC (permalink / raw) To: ltp, chrubis; +Cc: Joerg Vehlow From: Joerg Vehlow <joerg.vehlow@aox.de> This allows installation of the tests to a different directory than directly under $prefix. Before the layout was: $prefix/bin/{run-*,t0,run-tests.h,Makefile} $prefix/conformance $prefix/functional $prefix/stress with prefix being /opt/openposix_testsuite on linux and /usr/local/openposix_testsuite on other systems OR the value of the env-var $prefix. With this change, the prefix defaults to /opt/openposix_testsuite and can be changed the usual way using configure (./configure ---prefix=foo) Additionally the path of the tests below $prefix can be changed, using configure --with-open-posix-testdir=<foo>. This allows clean installation as part of ltp: $prefix/bin/{run-all-posix-option-group-tests.sh,run-posix-option-group-test.sh} $prefix/$testdir/bin/{run-tests.sh,t0} $prefix/$testdir/conformance $prefix/$testdir/functional $prefix/$testdir/stress Only the two directly callable shell scripts are kept under $prefix/bin, the two other executables are moved to testdir, because they are only used by the implementation of the test execution scripts (run.sh) $prefix/bin/Makefile is not installed anymore, because it is not required. Signed-off-by: Joerg Vehlow <joerg.vehlow@aox.de> --- testcases/open_posix_testsuite/.gitignore | 5 ++ testcases/open_posix_testsuite/CFLAGS | 1 - .../Documentation/HOWTO_Release | 4 +- .../Documentation/HOWTO_RunTests | 1 + testcases/open_posix_testsuite/INSTALL | 9 ---- testcases/open_posix_testsuite/LDFLAGS | 0 testcases/open_posix_testsuite/LDLIBS | 0 testcases/open_posix_testsuite/Makefile | 51 +++++++++++++------ testcases/open_posix_testsuite/QUICK-START | 6 +-- testcases/open_posix_testsuite/bin/Makefile | 30 ++++++++--- .../bin/run-posix-option-group-test.sh | 4 +- testcases/open_posix_testsuite/configure.ac | 18 +++++++ .../open_posix_testsuite/conformance/Makefile | 1 + .../conformance/behavior/Makefile | 2 + .../conformance/definitions/Makefile | 2 + .../conformance/interfaces/Makefile | 2 + .../open_posix_testsuite/functional/Makefile | 2 + .../include/mk/config.mk.in | 17 +++++++ .../open_posix_testsuite/include/mk/env.mk | 11 ++++ .../scripts/generate-makefiles.sh | 39 +++----------- .../scripts/print-prefix.sh | 10 ---- .../open_posix_testsuite/stress/Makefile | 2 + testcases/open_posix_testsuite/tools/Makefile | 9 ++-- 23 files changed, 139 insertions(+), 87 deletions(-) delete mode 100644 testcases/open_posix_testsuite/CFLAGS delete mode 100644 testcases/open_posix_testsuite/INSTALL delete mode 100644 testcases/open_posix_testsuite/LDFLAGS delete mode 100644 testcases/open_posix_testsuite/LDLIBS create mode 100644 testcases/open_posix_testsuite/configure.ac create mode 100644 testcases/open_posix_testsuite/include/mk/config.mk.in create mode 100644 testcases/open_posix_testsuite/include/mk/env.mk delete mode 100755 testcases/open_posix_testsuite/scripts/print-prefix.sh diff --git a/testcases/open_posix_testsuite/.gitignore b/testcases/open_posix_testsuite/.gitignore index a134c02a4..c9164df3a 100644 --- a/testcases/open_posix_testsuite/.gitignore +++ b/testcases/open_posix_testsuite/.gitignore @@ -15,3 +15,8 @@ run.sh logfile + +/configure +/config.log +/config.status +include/mk/config.mk diff --git a/testcases/open_posix_testsuite/CFLAGS b/testcases/open_posix_testsuite/CFLAGS deleted file mode 100644 index 297d2929a..000000000 --- a/testcases/open_posix_testsuite/CFLAGS +++ /dev/null @@ -1 +0,0 @@ --std=c99 -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -W -Wall diff --git a/testcases/open_posix_testsuite/Documentation/HOWTO_Release b/testcases/open_posix_testsuite/Documentation/HOWTO_Release index a6970c871..3332cae00 100644 --- a/testcases/open_posix_testsuite/Documentation/HOWTO_Release +++ b/testcases/open_posix_testsuite/Documentation/HOWTO_Release @@ -20,8 +20,8 @@ released files. 4. Download the *.tar.gz file from the SF interface and untar it in a sandbox. -5. Run "make" to try to build and execute all files in the release, and - ensure that they all build and execute correctly. +5. Run "./configure && make" to try to build and execute all files + in the release, and ensure that they all build and execute correctly. 6. Craft a release message and send to: posixtest-announce. diff --git a/testcases/open_posix_testsuite/Documentation/HOWTO_RunTests b/testcases/open_posix_testsuite/Documentation/HOWTO_RunTests index 0231838e2..c443f9e3e 100644 --- a/testcases/open_posix_testsuite/Documentation/HOWTO_RunTests +++ b/testcases/open_posix_testsuite/Documentation/HOWTO_RunTests @@ -45,6 +45,7 @@ To build and run the tests, you should be in the main posix test suite directory. From there, execute: + # ./configure # make all This will build all of the conformance, functional, and stress tests. diff --git a/testcases/open_posix_testsuite/INSTALL b/testcases/open_posix_testsuite/INSTALL deleted file mode 100644 index 9e3d3cd0a..000000000 --- a/testcases/open_posix_testsuite/INSTALL +++ /dev/null @@ -1,9 +0,0 @@ - -This package does not install yet ... it is intended to be run -directly. - -See BUILD for information on how to configure your system to build -all tests. - -See Documentation/HOWTO_RunTests for information on how to run all tests. - diff --git a/testcases/open_posix_testsuite/LDFLAGS b/testcases/open_posix_testsuite/LDFLAGS deleted file mode 100644 index e69de29bb..000000000 diff --git a/testcases/open_posix_testsuite/LDLIBS b/testcases/open_posix_testsuite/LDLIBS deleted file mode 100644 index e69de29bb..000000000 diff --git a/testcases/open_posix_testsuite/Makefile b/testcases/open_posix_testsuite/Makefile index fea6db14b..affabf9f7 100644 --- a/testcases/open_posix_testsuite/Makefile +++ b/testcases/open_posix_testsuite/Makefile @@ -5,6 +5,10 @@ # all of the Makefiles will be rebuilt by default. CRITICAL_MAKEFILE= conformance/interfaces/timer_settime/Makefile +top_srcdir?= . + +include include/mk/env.mk + # The default logfile for the tests. LOGFILE?= logfile # Subdirectories to traverse down. @@ -21,43 +25,58 @@ BUILD_MAKE= env $(BUILD_MAKE_ENV) $(MAKE) TEST_MAKE= env $(TEST_MAKE_ENV) $(MAKE) -k -top_srcdir?= . - -prefix?= `$(top_srcdir)/scripts/print_prefix.sh` - -datadir?= $(prefix)/share - -exec_prefix?= $(prefix) - all: conformance-all functional-all stress-all tools-all ifeq ($(shell uname -s), Linux) include Makefile.linux endif -clean: $(CRITICAL_MAKEFILE) - @rm -f $(LOGFILE)* +AUTOGENERATED_FILES = include/mk/config.mk + +.PHONY: ac-clean +ac-clean: clean + +.PHONY: clean +clean: + $(RM) -f $(LOGFILE)* + $(RM) -f config.log config.status @for dir in $(SUBDIRS) tools; do \ $(MAKE) -C $$dir clean >/dev/null; \ done -distclean: distclean-makefiles +.PHONY: distclean +distclean: clean distclean-makefiles + @rm -f $(AUTOGENERATED_FILES) # Clean out all of the generated Makefiles. +.PHONY: distclean-makefiles distclean-makefiles: @for dir in $(SUBDIRS); do \ $(MAKE) -C $$dir $@; \ done +$(AUTOGENERATED_FILES): $(top_builddir)/config.status + $(SHELL) $^ + +.PHONY: autotools +autotools: configure + +configure: configure.ac + autoconf + +.PHONY: generate-makefiles generate-makefiles: distclean-makefiles @env top_srcdir=$(top_srcdir) \ $(top_srcdir)/scripts/generate-makefiles.sh +.PHONY: install install: bin-install conformance-install functional-install stress-install +.PHONY: test test: conformance-test functional-test stress-test # Test build and execution targets. +.PHONY: conformance-all conformance-install conformance-test conformance-all: $(CRITICAL_MAKEFILE) @rm -f `if echo "$(LOGFILE)" | grep -q '^/'; then echo "$(LOGFILE)"; else echo "\`pwd\`/$(LOGFILE)"; fi`.$@ @$(BUILD_MAKE) -C conformance -j1 all @@ -69,6 +88,7 @@ conformance-test: @rm -f `if echo "$(LOGFILE)" | grep -q '^/'; then echo "$(LOGFILE)"; else echo "\`pwd\`/$(LOGFILE)"; fi`.$@ @$(TEST_MAKE) -C conformance test +.PHONY: functional-all functional-install functional-test functional-all: $(CRITICAL_MAKEFILE) @rm -f `if echo "$(LOGFILE)" | grep -q '^/'; then echo "$(LOGFILE)"; else echo "\`pwd\`/$(LOGFILE)"; fi`.$@ @$(BUILD_MAKE) -C functional -j1 all @@ -80,6 +100,7 @@ functional-test: @rm -f `if echo "$(LOGFILE)" | grep -q '^/'; then echo "$(LOGFILE)"; else echo "\`pwd\`/$(LOGFILE)"; fi`.$@ @$(TEST_MAKE) -C functional test +.PHONY: stress-all stress-install stress-test stress-all: $(CRITICAL_MAKEFILE) @rm -f `if echo "$(LOGFILE)" | grep -q '^/'; then echo "$(LOGFILE)"; else echo "\`pwd\`/$(LOGFILE)"; fi`.$@ @$(BUILD_MAKE) -C stress -j1 all @@ -92,17 +113,15 @@ stress-test: @$(TEST_MAKE) -C stress test # Tools build and install targets. +.PHONY: bin-install bin-install: @$(MAKE) -C bin install +.PHONY: tools-all tools-all: @$(MAKE) -C tools all -$(CRITICAL_MAKEFILE): \ - $(top_srcdir)/scripts/generate-makefiles.sh \ - $(top_srcdir)/CFLAGS \ - $(top_srcdir)/LDFLAGS \ - $(top_srcdir)/LDLIBS +$(CRITICAL_MAKEFILE): $(top_srcdir)/scripts/generate-makefiles.sh @$(MAKE) generate-makefiles .PHONY: check diff --git a/testcases/open_posix_testsuite/QUICK-START b/testcases/open_posix_testsuite/QUICK-START index 6f5d881b4..649d7a3d7 100644 --- a/testcases/open_posix_testsuite/QUICK-START +++ b/testcases/open_posix_testsuite/QUICK-START @@ -10,8 +10,6 @@ No worries! Here's a quick doc to help you around POSIX** Test Suite. Setting up your machine ======================== -* There is nothing to install, the suite is intended to be run directly. - * See the "BUILD" file for info on how to set up the Makefile and your machine, depending on what specific area you are concentrating on. (Signals, Semaphores, Threads, Timers or Message Queues). @@ -20,8 +18,8 @@ Setting up your machine Running the tests =================== -* Easiest way to run all the tests is to do a "make all" in the top-level - directory. +* Easiest way to run all the tests is to do a "./configure && make all" + in the top-level directory. * To run tests for a specific directory, do the following - make generate-makefiles # only required for the first shot. diff --git a/testcases/open_posix_testsuite/bin/Makefile b/testcases/open_posix_testsuite/bin/Makefile index d9fd13800..262a6567c 100644 --- a/testcases/open_posix_testsuite/bin/Makefile +++ b/testcases/open_posix_testsuite/bin/Makefile @@ -4,18 +4,32 @@ # Ngie Cooper, July 2010 # -top_srcdir?= .. +top_srcdir ?= .. -srcdir= $(top_srcdir)/bin +include $(top_srcdir)/include/mk/config.mk -prefix?= `$(top_srcdir)/scripts/print-prefix.sh` - -bindir?= $(prefix)/bin +INSTALL_BIN_TARGETS = run-all-posix-option-group-tests.sh run-posix-option-group-test.sh +INSTALL_TESTCASE_BIN_TARGETS = run-tests.sh t0 +.PHONY: clean clean: @rm -f t0.val -install: clean - @set -e; for i in `ls *`; do \ - install -m 0755 $$i $(DESTDIR)/$(bindir)/. ;\ +.PHONY: install +install: clean $(DESTDIR)/$(bindir) $(DESTDIR)/$(testdir_bin) + set -e; for file in $(INSTALL_BIN_TARGETS); do \ + install -m 00755 $$file $(DESTDIR)/$(bindir)/$$file; \ + done + + sed -i 's~TESTPATH=""~TESTPATH="$(testdir_rel)"~' $(DESTDIR)/$(bindir)/run-posix-option-group-test.sh + + set -e; for file in $(INSTALL_TESTCASE_BIN_TARGETS); do \ + install -m 00755 $$file $(DESTDIR)/$(testdir_bin)/$$file; \ done + + +$(DESTDIR)/$(bindir): + mkdir -p $@ + +$(DESTDIR)/$(testdir_bin): + mkdir -p $@ diff --git a/testcases/open_posix_testsuite/bin/run-posix-option-group-test.sh b/testcases/open_posix_testsuite/bin/run-posix-option-group-test.sh index 1bbdddfd5..e90c252a3 100755 --- a/testcases/open_posix_testsuite/bin/run-posix-option-group-test.sh +++ b/testcases/open_posix_testsuite/bin/run-posix-option-group-test.sh @@ -8,7 +8,9 @@ # # Use to build and run tests for a specific area -BASEDIR="$(dirname "$0")/../conformance/interfaces" +TESTPATH="" + +BASEDIR="$(dirname "$0")/../${TESTPATH}/conformance/interfaces" usage() { diff --git a/testcases/open_posix_testsuite/configure.ac b/testcases/open_posix_testsuite/configure.ac new file mode 100644 index 000000000..ae0399d07 --- /dev/null +++ b/testcases/open_posix_testsuite/configure.ac @@ -0,0 +1,18 @@ +AC_PREREQ(2.61) +AC_INIT([open_posix_testsuite], [LTP_VERSION], [ltp@lists.linux.it]) +AC_CONFIG_FILES([ \ + include/mk/config.mk \ +]) + +AC_PROG_CC_C99 + +AC_PREFIX_DEFAULT(/opt/openposix_testsuite) + +AC_ARG_WITH([open-posix-testdir], + [AS_HELP_STRING([--with-open-posix-testdir=DIR], [Relative path from $prefix to testdir])], + [testdir=$withval], + [testdir=] +) +AC_SUBST([testdir], [$testdir]) + +AC_OUTPUT diff --git a/testcases/open_posix_testsuite/conformance/Makefile b/testcases/open_posix_testsuite/conformance/Makefile index 11e8a840f..756d25252 100644 --- a/testcases/open_posix_testsuite/conformance/Makefile +++ b/testcases/open_posix_testsuite/conformance/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-or-later # Ngie Cooper, June 2010 +.PHONY: all clean distclean-makefiles install test all clean distclean-makefiles install test: @for dir in `ls -d */Makefile 2>/dev/null | sed -e 's,/Makefile$$,,g'`; do \ $(MAKE) -C $$dir $@; \ diff --git a/testcases/open_posix_testsuite/conformance/behavior/Makefile b/testcases/open_posix_testsuite/conformance/behavior/Makefile index b09527fd3..f68140524 100644 --- a/testcases/open_posix_testsuite/conformance/behavior/Makefile +++ b/testcases/open_posix_testsuite/conformance/behavior/Makefile @@ -4,10 +4,12 @@ # Ngie Cooper, June 2010 # +.PHONY: all clean install test all clean install test: @for dir in `ls -d */Makefile 2>/dev/null | sed -e 's,/Makefile$$,,g'`; do \ $(MAKE) -C $$dir $@; \ done +.PHONY: distclean-makefiles distclean-makefiles: @find */ -name 'Makefile*' | xargs rm -f diff --git a/testcases/open_posix_testsuite/conformance/definitions/Makefile b/testcases/open_posix_testsuite/conformance/definitions/Makefile index b09527fd3..f68140524 100644 --- a/testcases/open_posix_testsuite/conformance/definitions/Makefile +++ b/testcases/open_posix_testsuite/conformance/definitions/Makefile @@ -4,10 +4,12 @@ # Ngie Cooper, June 2010 # +.PHONY: all clean install test all clean install test: @for dir in `ls -d */Makefile 2>/dev/null | sed -e 's,/Makefile$$,,g'`; do \ $(MAKE) -C $$dir $@; \ done +.PHONY: distclean-makefiles distclean-makefiles: @find */ -name 'Makefile*' | xargs rm -f diff --git a/testcases/open_posix_testsuite/conformance/interfaces/Makefile b/testcases/open_posix_testsuite/conformance/interfaces/Makefile index 2eb2bd40b..3525da062 100644 --- a/testcases/open_posix_testsuite/conformance/interfaces/Makefile +++ b/testcases/open_posix_testsuite/conformance/interfaces/Makefile @@ -1,10 +1,12 @@ # SPDX-License-Identifier: GPL-2.0-or-later # Ngie Cooper, June 2010 +.PHONY: all clean install test all clean install test: @for dir in `ls -d */Makefile 2>/dev/null | sed -e 's,/Makefile$$,,g'`; do \ $(MAKE) -C $$dir $@; \ done +.PHONY: distclean-makefiles distclean-makefiles: @find */ -name 'Makefile*' | xargs rm -f diff --git a/testcases/open_posix_testsuite/functional/Makefile b/testcases/open_posix_testsuite/functional/Makefile index 3b22c89af..4af1790fe 100644 --- a/testcases/open_posix_testsuite/functional/Makefile +++ b/testcases/open_posix_testsuite/functional/Makefile @@ -4,10 +4,12 @@ # Ngie Cooper, June 2010 # +.PHONY: all clean install test all clean install test: @for dir in `ls -d */Makefile 2>/dev/null | sed -e 's,/Makefile$$,,g'`; do \ $(MAKE) -C $$dir $@; \ done +.PHONY: distclean-makefiles distclean-makefiles: @find */ -name 'Makefile*' | grep -v threads/Makefile | grep -v timers/Makefile | xargs rm -f diff --git a/testcases/open_posix_testsuite/include/mk/config.mk.in b/testcases/open_posix_testsuite/include/mk/config.mk.in new file mode 100644 index 000000000..c9a4b5c5a --- /dev/null +++ b/testcases/open_posix_testsuite/include/mk/config.mk.in @@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# Copyright (c) 2022 Joerg Vehlow <joerg.vehlow@aox.de> + +CC = @CC@ +CFLAGS += @CFLAGS@ +LDLIBS += @LIBS@ +LDFLAGS += @LDFLAGS@ + +prefix := @prefix@ +exec_prefix := @exec_prefix@ +bindir := ${exec_prefix}/bin + +testdir_rel := @testdir@ +testdir := ${prefix}/${testdir_rel} +testdir_bin := ${testdir}/bin + +CFLAGS += -std=c99 -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -W -Wall diff --git a/testcases/open_posix_testsuite/include/mk/env.mk b/testcases/open_posix_testsuite/include/mk/env.mk new file mode 100644 index 000000000..0cd485f69 --- /dev/null +++ b/testcases/open_posix_testsuite/include/mk/env.mk @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# Copyright (c) 2022 Joerg Vehlow <joerg.vehlow@aox.de> + +abs_top_builddir := $(abspath $(top_srcdir)) + +# autotools, *clean, don't require config.mk +ifeq ($(filter autotools %clean,$(MAKECMDGOALS)),) +include $(abs_top_builddir)/include/mk/config.mk +else +-include $(abs_top_builddir)/include/mk/config.mk +endif diff --git a/testcases/open_posix_testsuite/scripts/generate-makefiles.sh b/testcases/open_posix_testsuite/scripts/generate-makefiles.sh index 3234aa454..0649c480f 100755 --- a/testcases/open_posix_testsuite/scripts/generate-makefiles.sh +++ b/testcases/open_posix_testsuite/scripts/generate-makefiles.sh @@ -111,9 +111,9 @@ top_srcdir?= `echo "$prereq_dir" | awk '{ gsub(/[^\/]+/, "..", $0); print }'` subdir= $prereq_cache_dir srcdir= \$(top_srcdir)/\$(subdir) -prefix?= $PREFIX -exec_prefix?= \$(prefix) -INSTALL_DIR= \$(DESTDIR)/\$(exec_prefix)/\$(subdir) +include \$(top_srcdir)/include/mk/env.mk + +INSTALL_DIR= \$(DESTDIR)/\$(testdir)/\$(subdir) LOGFILE?= logfile # Build variables @@ -124,13 +124,6 @@ CFLAGS+= -I\$(srcdir) EOF - if [ -f "$GLOBAL_BOILERPLATE" ]; then - cat >> "$makefile.1" <<EOF -# Top-level make definitions -`cat $GLOBAL_BOILERPLATE` -EOF - fi - cat >> "$makefile.1" <<EOF # Submake make definitions. EOF @@ -169,13 +162,16 @@ EOF if [ ! -f "$makefile.3" ]; then cat > "$makefile.3" <<EOF +.PHONY: all all: \$(MAKE_TARGETS) @if [ -d speculative ]; then \$(MAKE) -C speculative all; fi +.PHONY: clean clean: rm -f \$(MAKE_TARGETS) logfile* run.sh *.core @if [ -d speculative ]; then \$(MAKE) -C speculative clean; fi +.PHONY: install install: \$(INSTALL_DIR) run.sh set -e; for file in \$(INSTALL_TARGETS) run.sh; do \\ if [ -f "\$\$file" ] ; then \\ @@ -185,6 +181,7 @@ install: \$(INSTALL_DIR) run.sh done @if [ -d speculative ]; then \$(MAKE) -C speculative install; fi +.PHONY: test test: run.sh \$(v)./run.sh @@ -308,35 +305,13 @@ generate_makefiles() { export PATH="$PATH:`dirname "$0"`" AUTHORDATE=`grep "Ngie Cooper" "$0" | head -n 1 | sed 's,# *,,'` -PREFIX=`print-prefix.sh` -EXEC_PREFIX="${PREFIX}/bin" TOP_SRCDIR=${TOP_SRCDIR:=`dirname "$0"`/..} -GLOBAL_BOILERPLATE="${TOP_SRCDIR}/.global_boilerplate" - -CONFIG_MK="../../include/mk/config-openposix.mk" - -rm -f "$GLOBAL_BOILERPLATE" - -for var in CFLAGS LDFLAGS LDLIBS; do - if [ -f "$TOP_SRCDIR/$var" ]; then - cat >> "$GLOBAL_BOILERPLATE" <<EOF -$var+= `cat "$TOP_SRCDIR/$var"` -EOF - fi -done - -if [ -f "$CONFIG_MK" ]; then - cat "$CONFIG_MK" >> "$GLOBAL_BOILERPLATE" -fi - # For the generic cases. generate_locate_test_makefile buildonly '.test' "$buildonly_compiler_args" generate_locate_test_makefile runnable '.run-test' generate_locate_test_makefile test-tools '' -rm -f "$GLOBAL_BOILERPLATE" - find . -name Makefile.1 -exec dirname {} \; | while read dir; do if [ -f "$dir/Makefile.2" ]; then cat $dir/Makefile.1 $dir/Makefile.2 $dir/Makefile.3 > $dir/Makefile diff --git a/testcases/open_posix_testsuite/scripts/print-prefix.sh b/testcases/open_posix_testsuite/scripts/print-prefix.sh deleted file mode 100755 index 795097f60..000000000 --- a/testcases/open_posix_testsuite/scripts/print-prefix.sh +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh - -if uname -a | grep -iq linux -then - DEFAULT_PREFIX=/opt -else - DEFAULT_PREFIX=/usr/local -fi - -echo ${prefix:=$DEFAULT_PREFIX/openposix_testsuite} diff --git a/testcases/open_posix_testsuite/stress/Makefile b/testcases/open_posix_testsuite/stress/Makefile index b09527fd3..f68140524 100644 --- a/testcases/open_posix_testsuite/stress/Makefile +++ b/testcases/open_posix_testsuite/stress/Makefile @@ -4,10 +4,12 @@ # Ngie Cooper, June 2010 # +.PHONY: all clean install test all clean install test: @for dir in `ls -d */Makefile 2>/dev/null | sed -e 's,/Makefile$$,,g'`; do \ $(MAKE) -C $$dir $@; \ done +.PHONY: distclean-makefiles distclean-makefiles: @find */ -name 'Makefile*' | xargs rm -f diff --git a/testcases/open_posix_testsuite/tools/Makefile b/testcases/open_posix_testsuite/tools/Makefile index a6f0917a9..6d2f08a00 100644 --- a/testcases/open_posix_testsuite/tools/Makefile +++ b/testcases/open_posix_testsuite/tools/Makefile @@ -4,14 +4,15 @@ # Ngie Cooper, June 2010 # --include ../../../include/mk/config-openposix.mk +top_srcdir ?= .. +srcdir = $(top_srcdir)/tools -top_srcdir?= .. - -srcdir= $(top_srcdir)/tools +include ../include/mk/env.mk +.PHONY: all all: ../bin/t0 +.PHONY: clean clean: @rm -f ../bin/t0 -- 2.25.1 -- Mailing list info: https://lists.linux.it/listinfo/ltp ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [LTP] [PATCH 2/3] openposix: Setup autoconf and fix installation layout 2022-06-27 12:53 ` [LTP] [PATCH 2/3] openposix: Setup autoconf and fix installation layout Joerg Vehlow @ 2022-07-05 5:57 ` Richard Palethorpe 2022-07-05 6:28 ` Richard Palethorpe ` (2 more replies) 0 siblings, 3 replies; 12+ messages in thread From: Richard Palethorpe @ 2022-07-05 5:57 UTC (permalink / raw) To: Joerg Vehlow; +Cc: ltp, Joerg Vehlow Hello Joerg, Joerg Vehlow <lkml@jv-coder.de> writes: > From: Joerg Vehlow <joerg.vehlow@aox.de> > > This allows installation of the tests to a different directory > than directly under $prefix. > > Before the layout was: > $prefix/bin/{run-*,t0,run-tests.h,Makefile} > $prefix/conformance > $prefix/functional > $prefix/stress > > with prefix being /opt/openposix_testsuite on linux and > /usr/local/openposix_testsuite on other systems > OR the value of the env-var $prefix. > > With this change, the prefix defaults to /opt/openposix_testsuite > and can be changed the usual way using configure (./configure ---prefix=foo) > Additionally the path of the tests below $prefix can be changed, using > configure --with-open-posix-testdir=<foo>. This allows clean installation as > part of ltp: > > $prefix/bin/{run-all-posix-option-group-tests.sh,run-posix-option-group-test.sh} > $prefix/$testdir/bin/{run-tests.sh,t0} > $prefix/$testdir/conformance > $prefix/$testdir/functional > $prefix/$testdir/stress > > Only the two directly callable shell scripts are kept under $prefix/bin, > the two other executables are moved to testdir, because they are only > used by the implementation of the test execution scripts (run.sh) > $prefix/bin/Makefile is not installed anymore, because it is not required. > > Signed-off-by: Joerg Vehlow <joerg.vehlow@aox.de> > --- > testcases/open_posix_testsuite/.gitignore | 5 ++ > testcases/open_posix_testsuite/CFLAGS | 1 - > .../Documentation/HOWTO_Release | 4 +- > .../Documentation/HOWTO_RunTests | 1 + > testcases/open_posix_testsuite/INSTALL | 9 ---- > testcases/open_posix_testsuite/LDFLAGS | 0 > testcases/open_posix_testsuite/LDLIBS | 0 > testcases/open_posix_testsuite/Makefile | 51 +++++++++++++------ > testcases/open_posix_testsuite/QUICK-START | 6 +-- > testcases/open_posix_testsuite/bin/Makefile | 30 ++++++++--- > .../bin/run-posix-option-group-test.sh | 4 +- > testcases/open_posix_testsuite/configure.ac | 18 +++++++ > .../open_posix_testsuite/conformance/Makefile | 1 + > .../conformance/behavior/Makefile | 2 + > .../conformance/definitions/Makefile | 2 + > .../conformance/interfaces/Makefile | 2 + > .../open_posix_testsuite/functional/Makefile | 2 + > .../include/mk/config.mk.in | 17 +++++++ > .../open_posix_testsuite/include/mk/env.mk | 11 ++++ > .../scripts/generate-makefiles.sh | 39 +++----------- > .../scripts/print-prefix.sh | 10 ---- > .../open_posix_testsuite/stress/Makefile | 2 + > testcases/open_posix_testsuite/tools/Makefile | 9 ++-- > 23 files changed, 139 insertions(+), 87 deletions(-) > delete mode 100644 testcases/open_posix_testsuite/CFLAGS > delete mode 100644 testcases/open_posix_testsuite/INSTALL > delete mode 100644 testcases/open_posix_testsuite/LDFLAGS > delete mode 100644 testcases/open_posix_testsuite/LDLIBS > create mode 100644 testcases/open_posix_testsuite/configure.ac > create mode 100644 testcases/open_posix_testsuite/include/mk/config.mk.in > create mode 100644 testcases/open_posix_testsuite/include/mk/env.mk > delete mode 100755 testcases/open_posix_testsuite/scripts/print-prefix.sh > > diff --git a/testcases/open_posix_testsuite/.gitignore b/testcases/open_posix_testsuite/.gitignore > index a134c02a4..c9164df3a 100644 > --- a/testcases/open_posix_testsuite/.gitignore > +++ b/testcases/open_posix_testsuite/.gitignore > @@ -15,3 +15,8 @@ > run.sh > > logfile > + > +/configure > +/config.log > +/config.status > +include/mk/config.mk > diff --git a/testcases/open_posix_testsuite/CFLAGS b/testcases/open_posix_testsuite/CFLAGS > deleted file mode 100644 > index 297d2929a..000000000 > --- a/testcases/open_posix_testsuite/CFLAGS > +++ /dev/null > @@ -1 +0,0 @@ > --std=c99 -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -W -Wall > diff --git a/testcases/open_posix_testsuite/Documentation/HOWTO_Release b/testcases/open_posix_testsuite/Documentation/HOWTO_Release > index a6970c871..3332cae00 100644 > --- a/testcases/open_posix_testsuite/Documentation/HOWTO_Release > +++ b/testcases/open_posix_testsuite/Documentation/HOWTO_Release > @@ -20,8 +20,8 @@ released files. > 4. Download the *.tar.gz file from the SF interface and untar it in > a sandbox. > > -5. Run "make" to try to build and execute all files in the release, and > - ensure that they all build and execute correctly. > +5. Run "./configure && make" to try to build and execute all files > + in the release, and ensure that they all build and execute correctly. > > 6. Craft a release message and send to: posixtest-announce. > > diff --git a/testcases/open_posix_testsuite/Documentation/HOWTO_RunTests b/testcases/open_posix_testsuite/Documentation/HOWTO_RunTests > index 0231838e2..c443f9e3e 100644 > --- a/testcases/open_posix_testsuite/Documentation/HOWTO_RunTests > +++ b/testcases/open_posix_testsuite/Documentation/HOWTO_RunTests > @@ -45,6 +45,7 @@ To build and run the tests, you should be in the main posix test suite > directory. > > From there, execute: > + # ./configure > # make all > > This will build all of the conformance, functional, and stress tests. > diff --git a/testcases/open_posix_testsuite/INSTALL b/testcases/open_posix_testsuite/INSTALL > deleted file mode 100644 > index 9e3d3cd0a..000000000 > --- a/testcases/open_posix_testsuite/INSTALL > +++ /dev/null > @@ -1,9 +0,0 @@ > - > -This package does not install yet ... it is intended to be run > -directly. > - > -See BUILD for information on how to configure your system to build > -all tests. > - > -See Documentation/HOWTO_RunTests for information on how to run all tests. > - > diff --git a/testcases/open_posix_testsuite/LDFLAGS b/testcases/open_posix_testsuite/LDFLAGS > deleted file mode 100644 > index e69de29bb..000000000 > diff --git a/testcases/open_posix_testsuite/LDLIBS b/testcases/open_posix_testsuite/LDLIBS > deleted file mode 100644 > index e69de29bb..000000000 > diff --git a/testcases/open_posix_testsuite/Makefile b/testcases/open_posix_testsuite/Makefile > index fea6db14b..affabf9f7 100644 > --- a/testcases/open_posix_testsuite/Makefile > +++ b/testcases/open_posix_testsuite/Makefile > @@ -5,6 +5,10 @@ > # all of the Makefiles will be rebuilt by default. > CRITICAL_MAKEFILE= conformance/interfaces/timer_settime/Makefile > > +top_srcdir?= . > + > +include include/mk/env.mk > + > # The default logfile for the tests. > LOGFILE?= logfile > # Subdirectories to traverse down. > @@ -21,43 +25,58 @@ BUILD_MAKE= env $(BUILD_MAKE_ENV) $(MAKE) > > TEST_MAKE= env $(TEST_MAKE_ENV) $(MAKE) -k > > -top_srcdir?= . > - > -prefix?= `$(top_srcdir)/scripts/print_prefix.sh` > - > -datadir?= $(prefix)/share > - > -exec_prefix?= $(prefix) > - > all: conformance-all functional-all stress-all tools-all > > ifeq ($(shell uname -s), Linux) > include Makefile.linux > endif > > -clean: $(CRITICAL_MAKEFILE) > - @rm -f $(LOGFILE)* > +AUTOGENERATED_FILES = include/mk/config.mk > + > +.PHONY: ac-clean > +ac-clean: clean > + > +.PHONY: clean > +clean: > + $(RM) -f $(LOGFILE)* > + $(RM) -f config.log config.status > @for dir in $(SUBDIRS) tools; do \ > $(MAKE) -C $$dir clean >/dev/null; \ > done > > -distclean: distclean-makefiles > +.PHONY: distclean > +distclean: clean distclean-makefiles > + @rm -f $(AUTOGENERATED_FILES) Shouldn't this also include the configure script itself? Running distclean on the LTP root removes the top level configure script. > > # Clean out all of the generated Makefiles. > +.PHONY: distclean-makefiles > distclean-makefiles: > @for dir in $(SUBDIRS); do \ > $(MAKE) -C $$dir $@; \ > done > > +$(AUTOGENERATED_FILES): $(top_builddir)/config.status > + $(SHELL) $^ > + > +.PHONY: autotools > +autotools: configure > + > +configure: configure.ac > + autoconf > + > +.PHONY: generate-makefiles > generate-makefiles: distclean-makefiles > @env top_srcdir=$(top_srcdir) \ > $(top_srcdir)/scripts/generate-makefiles.sh > > +.PHONY: install > install: bin-install conformance-install functional-install stress-install > > +.PHONY: test > test: conformance-test functional-test stress-test > > # Test build and execution targets. > +.PHONY: conformance-all conformance-install conformance-test > conformance-all: $(CRITICAL_MAKEFILE) > @rm -f `if echo "$(LOGFILE)" | grep -q '^/'; then echo "$(LOGFILE)"; else echo "\`pwd\`/$(LOGFILE)"; fi`.$@ > @$(BUILD_MAKE) -C conformance -j1 all > @@ -69,6 +88,7 @@ conformance-test: > @rm -f `if echo "$(LOGFILE)" | grep -q '^/'; then echo "$(LOGFILE)"; else echo "\`pwd\`/$(LOGFILE)"; fi`.$@ > @$(TEST_MAKE) -C conformance test > > +.PHONY: functional-all functional-install functional-test > functional-all: $(CRITICAL_MAKEFILE) > @rm -f `if echo "$(LOGFILE)" | grep -q '^/'; then echo "$(LOGFILE)"; else echo "\`pwd\`/$(LOGFILE)"; fi`.$@ > @$(BUILD_MAKE) -C functional -j1 all > @@ -80,6 +100,7 @@ functional-test: > @rm -f `if echo "$(LOGFILE)" | grep -q '^/'; then echo "$(LOGFILE)"; else echo "\`pwd\`/$(LOGFILE)"; fi`.$@ > @$(TEST_MAKE) -C functional test > > +.PHONY: stress-all stress-install stress-test > stress-all: $(CRITICAL_MAKEFILE) > @rm -f `if echo "$(LOGFILE)" | grep -q '^/'; then echo "$(LOGFILE)"; else echo "\`pwd\`/$(LOGFILE)"; fi`.$@ > @$(BUILD_MAKE) -C stress -j1 all > @@ -92,17 +113,15 @@ stress-test: > @$(TEST_MAKE) -C stress test > > # Tools build and install targets. > +.PHONY: bin-install > bin-install: > @$(MAKE) -C bin install > > +.PHONY: tools-all > tools-all: > @$(MAKE) -C tools all > > -$(CRITICAL_MAKEFILE): \ > - $(top_srcdir)/scripts/generate-makefiles.sh \ > - $(top_srcdir)/CFLAGS \ > - $(top_srcdir)/LDFLAGS \ > - $(top_srcdir)/LDLIBS > +$(CRITICAL_MAKEFILE): $(top_srcdir)/scripts/generate-makefiles.sh > @$(MAKE) generate-makefiles > > .PHONY: check > diff --git a/testcases/open_posix_testsuite/QUICK-START b/testcases/open_posix_testsuite/QUICK-START > index 6f5d881b4..649d7a3d7 100644 > --- a/testcases/open_posix_testsuite/QUICK-START > +++ b/testcases/open_posix_testsuite/QUICK-START > @@ -10,8 +10,6 @@ No worries! Here's a quick doc to help you around POSIX** Test Suite. > Setting up your machine > ======================== > > -* There is nothing to install, the suite is intended to be run directly. > - > * See the "BUILD" file for info on how to set up the Makefile and your machine, > depending on what specific area you are concentrating on. > (Signals, Semaphores, Threads, Timers or Message Queues). > @@ -20,8 +18,8 @@ Setting up your machine > Running the tests > =================== > > -* Easiest way to run all the tests is to do a "make all" in the top-level > - directory. > +* Easiest way to run all the tests is to do a "./configure && make all" Trailing whitespace at the end of this line > + in the top-level directory. > > * To run tests for a specific directory, do the following > - make generate-makefiles # only required for the first shot. > diff --git a/testcases/open_posix_testsuite/bin/Makefile b/testcases/open_posix_testsuite/bin/Makefile > index d9fd13800..262a6567c 100644 > --- a/testcases/open_posix_testsuite/bin/Makefile > +++ b/testcases/open_posix_testsuite/bin/Makefile > @@ -4,18 +4,32 @@ > # Ngie Cooper, July 2010 > # > > -top_srcdir?= .. > +top_srcdir ?= .. > > -srcdir= $(top_srcdir)/bin > +include $(top_srcdir)/include/mk/config.mk > > -prefix?= `$(top_srcdir)/scripts/print-prefix.sh` > - > -bindir?= $(prefix)/bin > +INSTALL_BIN_TARGETS = run-all-posix-option-group-tests.sh run-posix-option-group-test.sh > +INSTALL_TESTCASE_BIN_TARGETS = run-tests.sh t0 > > +.PHONY: clean > clean: > @rm -f t0.val > > -install: clean > - @set -e; for i in `ls *`; do \ > - install -m 0755 $$i $(DESTDIR)/$(bindir)/. ;\ > +.PHONY: install > +install: clean $(DESTDIR)/$(bindir) $(DESTDIR)/$(testdir_bin) > + set -e; for file in $(INSTALL_BIN_TARGETS); do \ > + install -m 00755 $$file $(DESTDIR)/$(bindir)/$$file; \ > + done > + > + sed -i 's~TESTPATH=""~TESTPATH="$(testdir_rel)"~' $(DESTDIR)/$(bindir)/run-posix-option-group-test.sh > + > + set -e; for file in $(INSTALL_TESTCASE_BIN_TARGETS); do \ > + install -m 00755 $$file $(DESTDIR)/$(testdir_bin)/$$file; \ > done > + > + > +$(DESTDIR)/$(bindir): > + mkdir -p $@ > + > +$(DESTDIR)/$(testdir_bin): > + mkdir -p $@ > diff --git a/testcases/open_posix_testsuite/bin/run-posix-option-group-test.sh b/testcases/open_posix_testsuite/bin/run-posix-option-group-test.sh > index 1bbdddfd5..e90c252a3 100755 > --- a/testcases/open_posix_testsuite/bin/run-posix-option-group-test.sh > +++ b/testcases/open_posix_testsuite/bin/run-posix-option-group-test.sh > @@ -8,7 +8,9 @@ > # > # Use to build and run tests for a specific area > > -BASEDIR="$(dirname "$0")/../conformance/interfaces" > +TESTPATH="" > + > +BASEDIR="$(dirname "$0")/../${TESTPATH}/conformance/interfaces" > > usage() > { > diff --git a/testcases/open_posix_testsuite/configure.ac b/testcases/open_posix_testsuite/configure.ac > new file mode 100644 > index 000000000..ae0399d07 > --- /dev/null > +++ b/testcases/open_posix_testsuite/configure.ac > @@ -0,0 +1,18 @@ > +AC_PREREQ(2.61) > +AC_INIT([open_posix_testsuite], [LTP_VERSION], [ltp@lists.linux.it]) > +AC_CONFIG_FILES([ \ > + include/mk/config.mk \ > +]) > + > +AC_PROG_CC_C99 This causes a deprecation warning for me > + > +AC_PREFIX_DEFAULT(/opt/openposix_testsuite) > + > +AC_ARG_WITH([open-posix-testdir], > + [AS_HELP_STRING([--with-open-posix-testdir=DIR], [Relative path from $prefix to testdir])], > + [testdir=$withval], > + [testdir=] > +) > +AC_SUBST([testdir], [$testdir]) > + > +AC_OUTPUT -- Thank you, Richard. -- Mailing list info: https://lists.linux.it/listinfo/ltp ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [LTP] [PATCH 2/3] openposix: Setup autoconf and fix installation layout 2022-07-05 5:57 ` Richard Palethorpe @ 2022-07-05 6:28 ` Richard Palethorpe 2022-07-05 6:37 ` Joerg Vehlow 2022-07-05 6:43 ` Joerg Vehlow 2022-07-27 5:26 ` Joerg Vehlow 2 siblings, 1 reply; 12+ messages in thread From: Richard Palethorpe @ 2022-07-05 6:28 UTC (permalink / raw) To: Joerg Vehlow; +Cc: ltp, Joerg Vehlow Richard Palethorpe <rpalethorpe@suse.de> writes: > Hello Joerg, > > Joerg Vehlow <lkml@jv-coder.de> writes: > >> From: Joerg Vehlow <joerg.vehlow@aox.de> >> >> This allows installation of the tests to a different directory >> than directly under $prefix. >> >> Before the layout was: >> $prefix/bin/{run-*,t0,run-tests.h,Makefile} >> $prefix/conformance >> $prefix/functional >> $prefix/stress >> >> with prefix being /opt/openposix_testsuite on linux and >> /usr/local/openposix_testsuite on other systems >> OR the value of the env-var $prefix. >> >> With this change, the prefix defaults to /opt/openposix_testsuite >> and can be changed the usual way using configure (./configure ---prefix=foo) >> Additionally the path of the tests below $prefix can be changed, using >> configure --with-open-posix-testdir=<foo>. This allows clean installation as >> part of ltp: >> >> $prefix/bin/{run-all-posix-option-group-tests.sh,run-posix-option-group-test.sh} >> $prefix/$testdir/bin/{run-tests.sh,t0} >> $prefix/$testdir/conformance >> $prefix/$testdir/functional >> $prefix/$testdir/stress Sorry I don't see the need for this. I can't find the RFC where you may have explained it, however it should be written here anyway I think. -- Thank you, Richard. -- Mailing list info: https://lists.linux.it/listinfo/ltp ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [LTP] [PATCH 2/3] openposix: Setup autoconf and fix installation layout 2022-07-05 6:28 ` Richard Palethorpe @ 2022-07-05 6:37 ` Joerg Vehlow 2022-07-05 7:37 ` Richard Palethorpe 0 siblings, 1 reply; 12+ messages in thread From: Joerg Vehlow @ 2022-07-05 6:37 UTC (permalink / raw) To: rpalethorpe; +Cc: ltp, Joerg Vehlow Hi Richard, Am 7/5/2022 um 8:28 AM schrieb Richard Palethorpe: > > Richard Palethorpe <rpalethorpe@suse.de> writes: > >> Hello Joerg, >> >> Joerg Vehlow <lkml@jv-coder.de> writes: >> >>> From: Joerg Vehlow <joerg.vehlow@aox.de> >>> >>> This allows installation of the tests to a different directory >>> than directly under $prefix. >>> >>> Before the layout was: >>> $prefix/bin/{run-*,t0,run-tests.h,Makefile} >>> $prefix/conformance >>> $prefix/functional >>> $prefix/stress >>> >>> with prefix being /opt/openposix_testsuite on linux and >>> /usr/local/openposix_testsuite on other systems >>> OR the value of the env-var $prefix. >>> >>> With this change, the prefix defaults to /opt/openposix_testsuite >>> and can be changed the usual way using configure (./configure ---prefix=foo) >>> Additionally the path of the tests below $prefix can be changed, using >>> configure --with-open-posix-testdir=<foo>. This allows clean installation as >>> part of ltp: >>> >>> $prefix/bin/{run-all-posix-option-group-tests.sh,run-posix-option-group-test.sh} >>> $prefix/$testdir/bin/{run-tests.sh,t0} >>> $prefix/$testdir/conformance >>> $prefix/$testdir/functional >>> $prefix/$testdir/stress > > Sorry I don't see the need for this. I can't find the RFC where you may > have explained it, however it should be written here anyway I think. here is the RFC in the mailing list archive: https://lists.linux.it/pipermail/ltp/2022-June/029188.html Joerg -- Mailing list info: https://lists.linux.it/listinfo/ltp ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [LTP] [PATCH 2/3] openposix: Setup autoconf and fix installation layout 2022-07-05 6:37 ` Joerg Vehlow @ 2022-07-05 7:37 ` Richard Palethorpe 2022-07-27 5:42 ` Joerg Vehlow 0 siblings, 1 reply; 12+ messages in thread From: Richard Palethorpe @ 2022-07-05 7:37 UTC (permalink / raw) To: Joerg Vehlow; +Cc: ltp, Joerg Vehlow Hello Joerg, Joerg Vehlow <lkml@jv-coder.de> writes: > Hi Richard, > > Am 7/5/2022 um 8:28 AM schrieb Richard Palethorpe: >> >> Richard Palethorpe <rpalethorpe@suse.de> writes: >> >>> Hello Joerg, >>> >>> Joerg Vehlow <lkml@jv-coder.de> writes: >>> >>>> From: Joerg Vehlow <joerg.vehlow@aox.de> >>>> >>>> This allows installation of the tests to a different directory >>>> than directly under $prefix. >>>> >>>> Before the layout was: >>>> $prefix/bin/{run-*,t0,run-tests.h,Makefile} >>>> $prefix/conformance >>>> $prefix/functional >>>> $prefix/stress >>>> >>>> with prefix being /opt/openposix_testsuite on linux and >>>> /usr/local/openposix_testsuite on other systems >>>> OR the value of the env-var $prefix. >>>> >>>> With this change, the prefix defaults to /opt/openposix_testsuite >>>> and can be changed the usual way using configure (./configure ---prefix=foo) >>>> Additionally the path of the tests below $prefix can be changed, using >>>> configure --with-open-posix-testdir=<foo>. This allows clean installation as >>>> part of ltp: >>>> >>>> $prefix/bin/{run-all-posix-option-group-tests.sh,run-posix-option-group-test.sh} >>>> $prefix/$testdir/bin/{run-tests.sh,t0} >>>> $prefix/$testdir/conformance >>>> $prefix/$testdir/functional >>>> $prefix/$testdir/stress >> >> Sorry I don't see the need for this. I can't find the RFC where you may >> have explained it, however it should be written here anyway I think. > > here is the RFC in the mailing list archive: > https://lists.linux.it/pipermail/ltp/2022-June/029188.html > > Joerg OK, so things are being installed twice and it is generally a mess. This looks like a good cleanup. However this really needs to be explained in the patchset. There needs to be a clear description of where things have moved from and to. In particular what someone needs to do if this breaks their test runner scripts. This can then be copied into the LTP release notes. BTW IIRC we generate runtest files for the open posix tests and the test runner handles them almost like normal LTP tests. We don't use any of those scripts either. -- Thank you, Richard. -- Mailing list info: https://lists.linux.it/listinfo/ltp ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [LTP] [PATCH 2/3] openposix: Setup autoconf and fix installation layout 2022-07-05 7:37 ` Richard Palethorpe @ 2022-07-27 5:42 ` Joerg Vehlow 0 siblings, 0 replies; 12+ messages in thread From: Joerg Vehlow @ 2022-07-27 5:42 UTC (permalink / raw) To: rpalethorpe; +Cc: ltp, Joerg Vehlow Hi Richard Am 7/5/2022 um 9:37 AM schrieb Richard Palethorpe: > Hello Joerg, > > Joerg Vehlow <lkml@jv-coder.de> writes: > > OK, so things are being installed twice and it is generally a > mess. This looks like a good cleanup. > > However this really needs to be explained in the patchset. There > needs to be a clear description of where things have moved from and > to. In particular what someone needs to do if this breaks their test > runner scripts. This can then be copied into the LTP release notes. I think this is explained now in v2 in the commit message. > BTW IIRC we generate runtest files for the open posix tests and the test > runner handles them almost like normal LTP tests. We don't use any of > those scripts either. I was not able to find anything like this. Joerg -- Mailing list info: https://lists.linux.it/listinfo/ltp ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [LTP] [PATCH 2/3] openposix: Setup autoconf and fix installation layout 2022-07-05 5:57 ` Richard Palethorpe 2022-07-05 6:28 ` Richard Palethorpe @ 2022-07-05 6:43 ` Joerg Vehlow 2022-07-27 5:26 ` Joerg Vehlow 2 siblings, 0 replies; 12+ messages in thread From: Joerg Vehlow @ 2022-07-05 6:43 UTC (permalink / raw) To: rpalethorpe; +Cc: ltp, Joerg Vehlow Hi, Am 7/5/2022 um 7:57 AM schrieb Richard Palethorpe: > Hello Joerg, > > Joerg Vehlow <lkml@jv-coder.de> writes: >> +AC_PROG_CC_C99 > > This causes a deprecation warning for me I think autoconf developers messed up here. They obsoleted the macro in 2.70 and told users to replace it with just AC_PROG_CC, which defaults to C11, but also excepts C89. It is not possible (without adding more code), to verify if the required C version is available. What is even worse, that autoconf does not fallback to a version, where this was still not obsolete, even if an older autoconf version is defined in AC_PREREQ. Nevertheless, I guess in case of C99, we can just switch to AC_PROG_CC, because every compiler should support C99 nowadays. I just wanted to be explicit, because C99 us currenty selected in the CFLAGS file, that I dropped. Joerg -- Mailing list info: https://lists.linux.it/listinfo/ltp ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [LTP] [PATCH 2/3] openposix: Setup autoconf and fix installation layout 2022-07-05 5:57 ` Richard Palethorpe 2022-07-05 6:28 ` Richard Palethorpe 2022-07-05 6:43 ` Joerg Vehlow @ 2022-07-27 5:26 ` Joerg Vehlow 2 siblings, 0 replies; 12+ messages in thread From: Joerg Vehlow @ 2022-07-27 5:26 UTC (permalink / raw) To: rpalethorpe; +Cc: ltp, Joerg Vehlow Hi Richard, Am 7/5/2022 um 7:57 AM schrieb Richard Palethorpe: > Hello Joerg, > > Joerg Vehlow <lkml@jv-coder.de> writes: > >> >> -distclean: distclean-makefiles >> +.PHONY: distclean >> +distclean: clean distclean-makefiles >> + @rm -f $(AUTOGENERATED_FILES) > > Shouldn't this also include the configure script itself? Running > distclean on the LTP root removes the top level configure script. No it does not. If autotools generates all the makefiles, it would do that, but with the hand-crafted makefiles of ltp, it does not. The same is true for the realtime testsuite. It only deletes the configure script in maintainer-clean. To keep it consistent, I went for the same cleanup, as ltp itself an the realtime testsuite use. $ make distclean &>/dev/null && ls configure configure >> diff --git a/testcases/open_posix_testsuite/QUICK-START b/testcases/open_posix_testsuite/QUICK-START >> index 6f5d881b4..649d7a3d7 100644 >> --- a/testcases/open_posix_testsuite/QUICK-START >> +++ b/testcases/open_posix_testsuite/QUICK-START >> @@ -10,8 +10,6 @@ No worries! Here's a quick doc to help you around POSIX** Test Suite. >> Setting up your machine >> ======================== >> >> -* There is nothing to install, the suite is intended to be run directly. >> - >> * See the "BUILD" file for info on how to set up the Makefile and your machine, >> depending on what specific area you are concentrating on. >> (Signals, Semaphores, Threads, Timers or Message Queues). >> @@ -20,8 +18,8 @@ Setting up your machine >> Running the tests >> =================== >> >> -* Easiest way to run all the tests is to do a "make all" in the top-level >> - directory. >> +* Easiest way to run all the tests is to do a "./configure && make all" > > Trailing whitespace at the end of this line Fixed in v2 >> diff --git a/testcases/open_posix_testsuite/configure.ac b/testcases/open_posix_testsuite/configure.ac >> new file mode 100644 >> index 000000000..ae0399d07 >> --- /dev/null >> +++ b/testcases/open_posix_testsuite/configure.ac >> @@ -0,0 +1,18 @@ >> +AC_PREREQ(2.61) >> +AC_INIT([open_posix_testsuite], [LTP_VERSION], [ltp@lists.linux.it]) >> +AC_CONFIG_FILES([ \ >> + include/mk/config.mk \ >> +]) >> + >> +AC_PROG_CC_C99 > > This causes a deprecation warning for me As already explained, I will replace it with AC_PROG_CC in v2 Joerg -- Mailing list info: https://lists.linux.it/listinfo/ltp ^ permalink raw reply [flat|nested] 12+ messages in thread
* [LTP] [PATCH 3/3] configure: Integrate open posix testsuite configure 2022-06-27 12:53 [LTP] [0/3] openposix: Fix installation file layout Joerg Vehlow 2022-06-27 12:53 ` [LTP] [PATCH 1/3] openposix: Fix existence test for local flag-files Joerg Vehlow 2022-06-27 12:53 ` [LTP] [PATCH 2/3] openposix: Setup autoconf and fix installation layout Joerg Vehlow @ 2022-06-27 12:53 ` Joerg Vehlow 2022-07-05 6:22 ` Richard Palethorpe 2 siblings, 1 reply; 12+ messages in thread From: Joerg Vehlow @ 2022-06-27 12:53 UTC (permalink / raw) To: ltp, chrubis; +Cc: Joerg Vehlow From: Joerg Vehlow <joerg.vehlow@aox.de> Signed-off-by: Joerg Vehlow <joerg.vehlow@aox.de> --- configure.ac | 11 +++++++++++ include/mk/automake.mk | 7 ++++++- 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/configure.ac b/configure.ac index 69b145b5f..5ac23421c 100644 --- a/configure.ac +++ b/configure.ac @@ -334,8 +334,19 @@ AC_ARG_WITH([open-posix-testsuite], [with_open_posix_testsuite=$withval], [with_open_posix_testsuite=no] ) + +# Allow setting the directoy, where the open posix testsuite is installed to. +# If nothing is defined, we have to pass our default value to submake +AC_ARG_WITH([open-posix-testdir], + [AS_HELP_STRING([--with-open-posix-testdir=<dir>], + [compile and install the open posix testsuite])], + [], + [ac_configure_args="$ac_configure_args --with-open-posix-testdir=testcases/open_posix_testsuite"] +) + if test "x$with_open_posix_testsuite" = xyes; then AC_SUBST([WITH_OPEN_POSIX_TESTSUITE],["yes"]) + AC_CONFIG_SUBDIRS([testcases/open_posix_testsuite]) else AC_SUBST([WITH_OPEN_POSIX_TESTSUITE],["no"]) fi diff --git a/include/mk/automake.mk b/include/mk/automake.mk index 219d015d0..ee3b7f1b8 100644 --- a/include/mk/automake.mk +++ b/include/mk/automake.mk @@ -27,7 +27,8 @@ AUTOHEADER ?= autoheader AUTOMAKE ?= automake AUTOCONFED_SUBDIRS = \ - testcases/realtime + testcases/realtime \ + testcases/open_posix_testsuite # We want to run this every single time to ensure that all of the prereq files # are there. @@ -35,6 +36,10 @@ AUTOCONFED_SUBDIRS = \ testcases/realtime/configure: $(MAKE) -C $(@D) autotools +.PHONY: testcases/open_posix_testsuite/configure +testcases/open_posix_testsuite/configure: + $(MAKE) -C $(@D) autotools + .PHONY: autotools autotools: aclocal autoconf autoheader automake $(addsuffix /configure,$(AUTOCONFED_SUBDIRS)) -- 2.25.1 -- Mailing list info: https://lists.linux.it/listinfo/ltp ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [LTP] [PATCH 3/3] configure: Integrate open posix testsuite configure 2022-06-27 12:53 ` [LTP] [PATCH 3/3] configure: Integrate open posix testsuite configure Joerg Vehlow @ 2022-07-05 6:22 ` Richard Palethorpe 0 siblings, 0 replies; 12+ messages in thread From: Richard Palethorpe @ 2022-07-05 6:22 UTC (permalink / raw) To: Joerg Vehlow; +Cc: ltp, Joerg Vehlow Hello Joerg, Joerg Vehlow <lkml@jv-coder.de> writes: > From: Joerg Vehlow <joerg.vehlow@aox.de> > > Signed-off-by: Joerg Vehlow <joerg.vehlow@aox.de> > --- > configure.ac | 11 +++++++++++ > include/mk/automake.mk | 7 ++++++- > 2 files changed, 17 insertions(+), 1 deletion(-) > > diff --git a/configure.ac b/configure.ac > index 69b145b5f..5ac23421c 100644 > --- a/configure.ac > +++ b/configure.ac > @@ -334,8 +334,19 @@ AC_ARG_WITH([open-posix-testsuite], > [with_open_posix_testsuite=$withval], > [with_open_posix_testsuite=no] > ) > + > +# Allow setting the directoy, where the open posix testsuite is > installed to. This should be the help string for this option > +# If nothing is defined, we have to pass our default value to submake > +AC_ARG_WITH([open-posix-testdir], > + [AS_HELP_STRING([--with-open-posix-testdir=<dir>], > + [compile and install the open posix testsuite])], This is the help string for --with-open-posix-testsuite > + [], > + [ac_configure_args="$ac_configure_args --with-open-posix-testdir=testcases/open_posix_testsuite"] > +) > + > if test "x$with_open_posix_testsuite" = xyes; then > AC_SUBST([WITH_OPEN_POSIX_TESTSUITE],["yes"]) > + AC_CONFIG_SUBDIRS([testcases/open_posix_testsuite]) > else > AC_SUBST([WITH_OPEN_POSIX_TESTSUITE],["no"]) > fi > diff --git a/include/mk/automake.mk b/include/mk/automake.mk > index 219d015d0..ee3b7f1b8 100644 > --- a/include/mk/automake.mk > +++ b/include/mk/automake.mk > @@ -27,7 +27,8 @@ AUTOHEADER ?= autoheader > AUTOMAKE ?= automake > > AUTOCONFED_SUBDIRS = \ > - testcases/realtime > + testcases/realtime \ > + testcases/open_posix_testsuite > > # We want to run this every single time to ensure that all of the prereq files > # are there. > @@ -35,6 +36,10 @@ AUTOCONFED_SUBDIRS = \ > testcases/realtime/configure: > $(MAKE) -C $(@D) autotools > > +.PHONY: testcases/open_posix_testsuite/configure > +testcases/open_posix_testsuite/configure: > + $(MAKE) -C $(@D) autotools > + > .PHONY: autotools > autotools: aclocal autoconf autoheader automake $(addsuffix /configure,$(AUTOCONFED_SUBDIRS)) > > -- > 2.25.1 -- Thank you, Richard. -- Mailing list info: https://lists.linux.it/listinfo/ltp ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2022-07-27 5:42 UTC | newest] Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-06-27 12:53 [LTP] [0/3] openposix: Fix installation file layout Joerg Vehlow 2022-06-27 12:53 ` [LTP] [PATCH 1/3] openposix: Fix existence test for local flag-files Joerg Vehlow 2022-06-27 12:53 ` [LTP] [PATCH 2/3] openposix: Setup autoconf and fix installation layout Joerg Vehlow 2022-07-05 5:57 ` Richard Palethorpe 2022-07-05 6:28 ` Richard Palethorpe 2022-07-05 6:37 ` Joerg Vehlow 2022-07-05 7:37 ` Richard Palethorpe 2022-07-27 5:42 ` Joerg Vehlow 2022-07-05 6:43 ` Joerg Vehlow 2022-07-27 5:26 ` Joerg Vehlow 2022-06-27 12:53 ` [LTP] [PATCH 3/3] configure: Integrate open posix testsuite configure Joerg Vehlow 2022-07-05 6:22 ` Richard Palethorpe
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.