All of lore.kernel.org
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>,
	miquel.raynal@bootlin.com, nagasure@xilinx.com, vigneshr@ti.com
Cc: boris.brezillon@collabora.com, linux-mtd@lists.infradead.org,
	linux-kernel@vger.kernel.org, git@amd.com, richard@nod.at,
	amit.kumar-mahapatra@amd.com, Olga Kitaina <okitain@gmail.com>,
	stable@vger.kernel.org
Subject: Re: [PATCH v3 2/2] mtd: rawnand: arasan: Fix clock rate in NV-DDR
Date: Wed, 29 Jun 2022 13:38:55 +0200	[thread overview]
Message-ID: <20220629113855.283760-1-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20220628154824.12222-3-amit.kumar-mahapatra@xilinx.com>

On Tue, 2022-06-28 at 15:48:24 UTC, Amit Kumar Mahapatra wrote:
> From: Olga Kitaina <okitain@gmail.com>
> 
> According to the Arasan NAND controller spec, the flash clock rate for SDR
> must be <= 100 MHz, while for NV-DDR it must be the same as the rate of the
> CLK line for the mode. The driver previously always set 100 MHz for NV-DDR,
> which would result in incorrect behavior for NV-DDR modes 0-4.
> 
> The appropriate clock rate can be calculated from the NV-DDR timing
> parameters as 1/tCK, or for rates measured in picoseconds,
> 10^12 / nand_nvddr_timings->tCK_min.
> 
> Fixes: 197b88fecc50 ("mtd: rawnand: arasan: Add new Arasan NAND controller")
> CC: stable@vger.kernel.org # 5.8+
> Signed-off-by: Olga Kitaina <okitain@gmail.com>
> Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

WARNING: multiple messages have this Message-ID (diff)
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>,
	miquel.raynal@bootlin.com, nagasure@xilinx.com, vigneshr@ti.com
Cc: boris.brezillon@collabora.com, linux-mtd@lists.infradead.org,
	linux-kernel@vger.kernel.org, git@amd.com, richard@nod.at,
	amit.kumar-mahapatra@amd.com, Olga Kitaina <okitain@gmail.com>,
	stable@vger.kernel.org
Subject: Re: [PATCH v3 2/2] mtd: rawnand: arasan: Fix clock rate in NV-DDR
Date: Wed, 29 Jun 2022 13:38:55 +0200	[thread overview]
Message-ID: <20220629113855.283760-1-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20220628154824.12222-3-amit.kumar-mahapatra@xilinx.com>

On Tue, 2022-06-28 at 15:48:24 UTC, Amit Kumar Mahapatra wrote:
> From: Olga Kitaina <okitain@gmail.com>
> 
> According to the Arasan NAND controller spec, the flash clock rate for SDR
> must be <= 100 MHz, while for NV-DDR it must be the same as the rate of the
> CLK line for the mode. The driver previously always set 100 MHz for NV-DDR,
> which would result in incorrect behavior for NV-DDR modes 0-4.
> 
> The appropriate clock rate can be calculated from the NV-DDR timing
> parameters as 1/tCK, or for rates measured in picoseconds,
> 10^12 / nand_nvddr_timings->tCK_min.
> 
> Fixes: 197b88fecc50 ("mtd: rawnand: arasan: Add new Arasan NAND controller")
> CC: stable@vger.kernel.org # 5.8+
> Signed-off-by: Olga Kitaina <okitain@gmail.com>
> Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2022-06-29 11:39 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-28 15:48 [PATCH v3 0/2] mtd: rawnand: arasan: Fix clock rate in NV-DDR Amit Kumar Mahapatra
2022-06-28 15:48 ` Amit Kumar Mahapatra
2022-06-28 15:48 ` [PATCH v3 1/2] mtd: rawnand: arasan: Update NAND bus clock instead of system clock Amit Kumar Mahapatra
2022-06-28 15:48   ` Amit Kumar Mahapatra
2022-06-29 11:38   ` Miquel Raynal
2022-06-29 11:38     ` Miquel Raynal
2022-06-28 15:48 ` [PATCH v3 2/2] mtd: rawnand: arasan: Fix clock rate in NV-DDR Amit Kumar Mahapatra
2022-06-28 15:48   ` Amit Kumar Mahapatra
2022-06-29 11:38   ` Miquel Raynal [this message]
2022-06-29 11:38     ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220629113855.283760-1-miquel.raynal@bootlin.com \
    --to=miquel.raynal@bootlin.com \
    --cc=amit.kumar-mahapatra@amd.com \
    --cc=amit.kumar-mahapatra@xilinx.com \
    --cc=boris.brezillon@collabora.com \
    --cc=git@amd.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=nagasure@xilinx.com \
    --cc=okitain@gmail.com \
    --cc=richard@nod.at \
    --cc=stable@vger.kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.