* [PATCH v2 0/3] tty: TX helpers
@ 2022-09-01 11:06 ` Jiri Slaby
0 siblings, 0 replies; 29+ messages in thread
From: Jiri Slaby @ 2022-09-01 11:06 UTC (permalink / raw)
To: gregkh
Cc: Ilpo Järvinen, linux-serial, linux-kernel, Jiri Slaby,
Tobias Klauser, Richard Genoud, Nicolas Ferre, Alexandre Belloni,
Claudiu Beznea, Vladimir Zapolskiy, Liviu Dudau, Sudeep Holla,
Lorenzo Pieralisi, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Andreas Färber, Manivannan Sadhasivam, Russell King,
Florian Fainelli, bcm-kernel-feedback-list, Pali Rohár,
Kevin Cernekee, Palmer Dabbelt, Paul Walmsley, Orson Zhai,
Baolin Wang, Chunyan Zhang, Patrice Chotard, linux-riscv
This series introduces DEFINE_UART_PORT_TX_HELPER +
DEFINE_UART_PORT_TX_HELPER_LIMITED TX helpers. See PATCH 1/3 for the
details. Comments welcome.
Then it switches drivers to use them. First, to
DEFINE_UART_PORT_TX_HELPER() in 2/3 and then
DEFINE_UART_PORT_TX_HELPER_LIMITED() in 3/3.
The diffstat of patches 2+3 is as follows:
26 files changed, 191 insertions(+), 823 deletions(-)
which appears to be nice.
Cc: Tobias Klauser <tklauser@distanz.ch>
Cc: Richard Genoud <richard.genoud@gmail.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: "Pali Rohár" <pali@kernel.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: linux-riscv@lists.infradead.org
Jiri Slaby (3):
tty: serial: introduce transmit helper generators
tty: serial: use DEFINE_UART_PORT_TX_HELPER()
tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
Documentation/driver-api/serial/driver.rst | 3 +
drivers/tty/serial/21285.c | 33 ++-------
drivers/tty/serial/altera_jtaguart.c | 42 +++--------
drivers/tty/serial/altera_uart.c | 37 ++--------
drivers/tty/serial/amba-pl010.c | 37 ++--------
drivers/tty/serial/apbuart.c | 36 ++-------
drivers/tty/serial/atmel_serial.c | 29 ++------
drivers/tty/serial/bcm63xx_uart.c | 47 +++---------
drivers/tty/serial/fsl_lpuart.c | 38 +++-------
drivers/tty/serial/lantiq.c | 44 +++--------
drivers/tty/serial/lpc32xx_hs.c | 38 ++--------
drivers/tty/serial/mcf.c | 27 ++-----
drivers/tty/serial/mpc52xx_uart.c | 44 +----------
drivers/tty/serial/mps2-uart.c | 29 +-------
drivers/tty/serial/mux.c | 46 ++++--------
drivers/tty/serial/mvebu-uart.c | 40 ++--------
drivers/tty/serial/mxs-auart.c | 31 ++------
drivers/tty/serial/omap-serial.c | 47 +++---------
drivers/tty/serial/owl-uart.c | 35 +--------
drivers/tty/serial/pxa.c | 39 +++-------
drivers/tty/serial/rp2.c | 36 ++-------
drivers/tty/serial/sa1100.c | 49 +++++-------
drivers/tty/serial/serial_txx9.c | 37 ++--------
drivers/tty/serial/sifive.c | 45 ++---------
drivers/tty/serial/sprd_serial.c | 38 ++--------
drivers/tty/serial/st-asc.c | 50 ++-----------
drivers/tty/serial/vt8500_serial.c | 40 ++--------
include/linux/serial_core.h | 86 ++++++++++++++++++++++
28 files changed, 280 insertions(+), 823 deletions(-)
--
2.37.2
^ permalink raw reply [flat|nested] 29+ messages in thread
* [PATCH v2 0/3] tty: TX helpers
@ 2022-09-01 11:06 ` Jiri Slaby
0 siblings, 0 replies; 29+ messages in thread
From: Jiri Slaby @ 2022-09-01 11:06 UTC (permalink / raw)
To: gregkh
Cc: Ilpo Järvinen, linux-serial, linux-kernel, Jiri Slaby,
Tobias Klauser, Richard Genoud, Nicolas Ferre, Alexandre Belloni,
Claudiu Beznea, Vladimir Zapolskiy, Liviu Dudau, Sudeep Holla,
Lorenzo Pieralisi, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Andreas Färber, Manivannan Sadhasivam, Russell King,
Florian Fainelli, bcm-kernel-feedback-list, Pali Rohár,
Kevin Cernekee, Palmer Dabbelt, Paul Walmsley, Orson Zhai,
Baolin Wang, Chunyan Zhang, Patrice Chotard, linux-riscv
This series introduces DEFINE_UART_PORT_TX_HELPER +
DEFINE_UART_PORT_TX_HELPER_LIMITED TX helpers. See PATCH 1/3 for the
details. Comments welcome.
Then it switches drivers to use them. First, to
DEFINE_UART_PORT_TX_HELPER() in 2/3 and then
DEFINE_UART_PORT_TX_HELPER_LIMITED() in 3/3.
The diffstat of patches 2+3 is as follows:
26 files changed, 191 insertions(+), 823 deletions(-)
which appears to be nice.
Cc: Tobias Klauser <tklauser@distanz.ch>
Cc: Richard Genoud <richard.genoud@gmail.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: "Pali Rohár" <pali@kernel.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: linux-riscv@lists.infradead.org
Jiri Slaby (3):
tty: serial: introduce transmit helper generators
tty: serial: use DEFINE_UART_PORT_TX_HELPER()
tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
Documentation/driver-api/serial/driver.rst | 3 +
drivers/tty/serial/21285.c | 33 ++-------
drivers/tty/serial/altera_jtaguart.c | 42 +++--------
drivers/tty/serial/altera_uart.c | 37 ++--------
drivers/tty/serial/amba-pl010.c | 37 ++--------
drivers/tty/serial/apbuart.c | 36 ++-------
drivers/tty/serial/atmel_serial.c | 29 ++------
drivers/tty/serial/bcm63xx_uart.c | 47 +++---------
drivers/tty/serial/fsl_lpuart.c | 38 +++-------
drivers/tty/serial/lantiq.c | 44 +++--------
drivers/tty/serial/lpc32xx_hs.c | 38 ++--------
drivers/tty/serial/mcf.c | 27 ++-----
drivers/tty/serial/mpc52xx_uart.c | 44 +----------
drivers/tty/serial/mps2-uart.c | 29 +-------
drivers/tty/serial/mux.c | 46 ++++--------
drivers/tty/serial/mvebu-uart.c | 40 ++--------
drivers/tty/serial/mxs-auart.c | 31 ++------
drivers/tty/serial/omap-serial.c | 47 +++---------
drivers/tty/serial/owl-uart.c | 35 +--------
drivers/tty/serial/pxa.c | 39 +++-------
drivers/tty/serial/rp2.c | 36 ++-------
drivers/tty/serial/sa1100.c | 49 +++++-------
drivers/tty/serial/serial_txx9.c | 37 ++--------
drivers/tty/serial/sifive.c | 45 ++---------
drivers/tty/serial/sprd_serial.c | 38 ++--------
drivers/tty/serial/st-asc.c | 50 ++-----------
drivers/tty/serial/vt8500_serial.c | 40 ++--------
include/linux/serial_core.h | 86 ++++++++++++++++++++++
28 files changed, 280 insertions(+), 823 deletions(-)
--
2.37.2
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 29+ messages in thread
* [PATCH v2 1/3] tty: serial: introduce transmit helper generators
2022-09-01 11:06 ` Jiri Slaby
(?)
@ 2022-09-01 11:06 ` Jiri Slaby
2022-09-01 12:25 ` Greg KH
2022-09-02 10:22 ` Ilpo Järvinen
-1 siblings, 2 replies; 29+ messages in thread
From: Jiri Slaby @ 2022-09-01 11:06 UTC (permalink / raw)
To: gregkh; +Cc: Ilpo Järvinen, linux-serial, linux-kernel, Jiri Slaby
Many serial drivers do the same thing:
* send x_char if set
* keep sending from the xmit circular buffer until either
- the loop reaches the end of the xmit buffer
- TX is stopped
- HW fifo is full
* check for pending characters and:
- wake up tty writers to fill for more data into xmit buffer
- stop TX if there is nothing in the xmit buffer
The only differences are:
* how to write the character to the HW fifo
* the check of the end condition:
- is the HW fifo full?
- is limit of the written characters reached?
So unify the above into two helper generators:
* DEFINE_UART_PORT_TX_HELPER_LIMITED() -- it performs the above taking
the written characters limit into account, and
* DEFINE_UART_PORT_TX_HELPER() -- the same as above, except it only
checks the HW readiness, not the characters limit.
The HW specific operations (as stated as "differences" above) are passed
as arguments to the macros. They are:
* tx_ready() -- returns true if HW can accept more data.
* put_char() -- write a character to the device.
* tx_done() -- when the write loop is done, perform arbitrary action
before potential invocation of ops->stop_tx() happens.
Note that the above macros are generators. This means the code is
generated in place and the above 3 arguments are "inlined". I.e. no
added penalty by generating call instructions for every single
character. Nor any indirect calls. (As in previous versions of this
patchset.)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
Notes:
[v2] instead of a function (uart_port_tx_limit()) in serial_core,
generate these in-place using macros. Thus eliminating "call"
penalty.
Documentation/driver-api/serial/driver.rst | 3 +
include/linux/serial_core.h | 86 ++++++++++++++++++++++
2 files changed, 89 insertions(+)
diff --git a/Documentation/driver-api/serial/driver.rst b/Documentation/driver-api/serial/driver.rst
index 23c6b956cd90..25775bf1fcc6 100644
--- a/Documentation/driver-api/serial/driver.rst
+++ b/Documentation/driver-api/serial/driver.rst
@@ -78,6 +78,9 @@ Other functions
uart_get_lsr_info uart_handle_dcd_change uart_handle_cts_change
uart_try_toggle_sysrq uart_get_console
+.. kernel-doc:: include/linux/serial_core.h
+ :identifiers: DEFINE_UART_PORT_TX_HELPER_LIMITED DEFINE_UART_PORT_TX_HELPER
+
Other notes
-----------
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 6e4f4765d209..715778160ae1 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -646,6 +646,92 @@ struct uart_driver {
void uart_write_wakeup(struct uart_port *port);
+#define __DEFINE_UART_PORT_TX_HELPER(name, port, ch, tx_ready, put_char, \
+ tx_done, for_test, for_post, ...) \
+unsigned int name(struct uart_port *port __VA_OPT__(,) __VA_ARGS__) \
+{ \
+ struct circ_buf *xmit = &port->state->xmit; \
+ unsigned int pending; \
+ u8 ch; \
+ \
+ for (; (for_test) && (tx_ready); (for_post), port->icount.tx++) { \
+ if (port->x_char) { \
+ ch = port->x_char; \
+ (put_char); \
+ port->x_char = 0; \
+ continue; \
+ } \
+ \
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) \
+ break; \
+ \
+ ch = xmit->buf[xmit->tail]; \
+ (put_char); \
+ xmit->tail = (xmit->tail + 1) % UART_XMIT_SIZE; \
+ } \
+ \
+ (tx_done); \
+ \
+ pending = uart_circ_chars_pending(xmit); \
+ if (pending < WAKEUP_CHARS) { \
+ uart_write_wakeup(port); \
+ \
+ if (pending == 0) \
+ port->ops->stop_tx(port); \
+ } \
+ \
+ return pending; \
+}
+
+/**
+ * DEFINE_UART_PORT_TX_HELPER_LIMITED -- generate transmit helper for uart_port
+ * with count limiting
+ * @name: name of the helper to generate
+ * @port: name of variable holding uart_port
+ * @ch: name of variable holding a character to write
+ * @tx_ready: can HW accept more data function
+ * @put_char: function to write a character
+ * @tx_done: function to call after the loop is done
+ *
+ * This macro generates a function @name. The generated function is meant as a
+ * helper to transmit characters from the xmit buffer to the hardware using
+ * @put_char(). It does so until count (passed to @name) characters are sent
+ * and while @tx_ready() still returns non-zero (if non-NULL).
+ *
+ * The generated function returns the number of characters in the xmit buffer
+ * when done.
+ *
+ * The functions in parameters shall be designed as follows:
+ * * **tx_ready(port):** the function shall return true if the HW can accept
+ * more data to be sent. This function can be %NULL, which means the HW is
+ * always ready.
+ * * **put_char(port, ch):** the function shall write @ch to the device.
+ * * **tx_done(port):** when the write loop is done, this function can
+ * perform arbitrary action before potential invocation of ops->stop_tx()
+ * happens. This function can be %NULL.
+ *
+ * For all of them, @port->lock is held, interrupts are locally disabled and
+ * the functions must not sleep.
+ */
+#define DEFINE_UART_PORT_TX_HELPER_LIMITED(name, port, ch, tx_ready, put_char, \
+ tx_done) \
+ __DEFINE_UART_PORT_TX_HELPER(name, port, ch, tx_ready, put_char, \
+ tx_done, count, count--, unsigned int count)
+
+/**
+ * DEFINE_UART_PORT_TX_HELPER -- generate transmit helper for uart_port
+ * @name: name of the helper to generate
+ * @port: name of variable holding uart_port
+ * @ch: name of variable holding a character to write
+ * @tx_ready: can HW accept more data function
+ * @put_char: function to write a character
+ *
+ * See DEFINE_UART_PORT_TX_HELPER_LIMITED() for more details.
+ */
+#define DEFINE_UART_PORT_TX_HELPER(name, port, ch, tx_ready, put_char) \
+ __DEFINE_UART_PORT_TX_HELPER(name, port, ch, tx_ready, put_char, \
+ ({}), true, ({}))
+
/*
* Baud rate helpers.
*/
--
2.37.2
^ permalink raw reply related [flat|nested] 29+ messages in thread
* [PATCH v2 2/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER()
2022-09-01 11:06 ` Jiri Slaby
(?)
(?)
@ 2022-09-01 11:06 ` Jiri Slaby
2022-09-02 14:21 ` Ilpo Järvinen
-1 siblings, 1 reply; 29+ messages in thread
From: Jiri Slaby @ 2022-09-01 11:06 UTC (permalink / raw)
To: gregkh
Cc: Ilpo Järvinen, linux-serial, linux-kernel, Jiri Slaby,
Tobias Klauser, Richard Genoud, Nicolas Ferre, Alexandre Belloni,
Claudiu Beznea, Vladimir Zapolskiy, Liviu Dudau, Sudeep Holla,
Lorenzo Pieralisi, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Andreas Färber, Manivannan Sadhasivam
DEFINE_UART_PORT_TX_HELPER() is a new helper to send characters to the
device. Use it in these drivers.
Cc: Tobias Klauser <tklauser@distanz.ch>
Cc: Richard Genoud <richard.genoud@gmail.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/serial/altera_uart.c | 37 +++-------------------
drivers/tty/serial/atmel_serial.c | 29 +++++-------------
drivers/tty/serial/fsl_lpuart.c | 38 ++++++-----------------
drivers/tty/serial/lantiq.c | 44 ++++++++-------------------
drivers/tty/serial/lpc32xx_hs.c | 38 +++++------------------
drivers/tty/serial/mcf.c | 27 +++-------------
drivers/tty/serial/mpc52xx_uart.c | 44 ++-------------------------
drivers/tty/serial/mps2-uart.c | 29 ++----------------
drivers/tty/serial/mxs-auart.c | 31 +++++--------------
drivers/tty/serial/owl-uart.c | 35 ++-------------------
drivers/tty/serial/sa1100.c | 49 ++++++++++++------------------
drivers/tty/serial/vt8500_serial.c | 40 +++++-------------------
12 files changed, 88 insertions(+), 353 deletions(-)
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 8b749ed557c6..c85300baeb93 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -246,37 +246,10 @@ static void altera_uart_rx_chars(struct altera_uart *pp)
tty_flip_buffer_push(&port->state->port);
}
-static void altera_uart_tx_chars(struct altera_uart *pp)
-{
- struct uart_port *port = &pp->port;
- struct circ_buf *xmit = &port->state->xmit;
-
- if (port->x_char) {
- /* Send special char - probably flow control */
- altera_uart_writel(port, port->x_char, ALTERA_UART_TXDATA_REG);
- port->x_char = 0;
- port->icount.tx++;
- return;
- }
-
- while (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
- ALTERA_UART_STATUS_TRDY_MSK) {
- if (xmit->head == xmit->tail)
- break;
- altera_uart_writel(port, xmit->buf[xmit->tail],
- ALTERA_UART_TXDATA_REG);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (xmit->head == xmit->tail) {
- pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
- altera_uart_update_ctrl_reg(pp);
- }
-}
+static DEFINE_UART_PORT_TX_HELPER(altera_uart_tx_chars, port, ch,
+ altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
+ ALTERA_UART_STATUS_TRDY_MSK,
+ altera_uart_writel(port, ch, ALTERA_UART_TXDATA_REG));
static irqreturn_t altera_uart_interrupt(int irq, void *data)
{
@@ -290,7 +263,7 @@ static irqreturn_t altera_uart_interrupt(int irq, void *data)
if (isr & ALTERA_UART_STATUS_RRDY_MSK)
altera_uart_rx_chars(pp);
if (isr & ALTERA_UART_STATUS_TRDY_MSK)
- altera_uart_tx_chars(pp);
+ altera_uart_tx_chars(&pp->port);
spin_unlock(&port->lock);
return IRQ_RETVAL(isr);
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 30ba9eef7b39..ce0da7aa55bd 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -812,36 +812,21 @@ static void atmel_rx_chars(struct uart_port *port)
atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_rx);
}
+static DEFINE_UART_PORT_TX_HELPER(atmel_do_tx_chars, port, ch,
+ atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXRDY,
+ atmel_uart_write_char(port, ch));
+
/*
* Transmit characters (called from tasklet with TXRDY interrupt
* disabled)
*/
static void atmel_tx_chars(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ unsigned int pending;
- if (port->x_char &&
- (atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXRDY)) {
- atmel_uart_write_char(port, port->x_char);
- port->icount.tx++;
- port->x_char = 0;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(port))
- return;
-
- while (atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXRDY) {
- atmel_uart_write_char(port, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (!uart_circ_empty(xmit)) {
+ pending = atmel_do_tx_chars(port);
+ if (pending) {
/* we still have characters to transmit, so we should continue
* transmitting them when TX is ready, regardless of
* mode or duplexity
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index f6c33cd228c8..7a28c0e37142 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -740,36 +740,18 @@ static int lpuart32_poll_get_char(struct uart_port *port)
}
#endif
-static inline void lpuart_transmit_buffer(struct lpuart_port *sport)
+static bool lpuart_tx_ready(struct uart_port *port)
{
- struct circ_buf *xmit = &sport->port.state->xmit;
-
- if (sport->port.x_char) {
- writeb(sport->port.x_char, sport->port.membase + UARTDR);
- sport->port.icount.tx++;
- sport->port.x_char = 0;
- return;
- }
-
- if (lpuart_stopped_or_empty(&sport->port)) {
- lpuart_stop_tx(&sport->port);
- return;
- }
-
- while (!uart_circ_empty(xmit) &&
- (readb(sport->port.membase + UARTTCFIFO) < sport->txfifo_size)) {
- writeb(xmit->buf[xmit->tail], sport->port.membase + UARTDR);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- sport->port.icount.tx++;
- }
+ struct lpuart_port *sport = container_of(port, struct lpuart_port,
+ port);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&sport->port);
-
- if (uart_circ_empty(xmit))
- lpuart_stop_tx(&sport->port);
+ return readb(port->membase + UARTTCFIFO) < sport->txfifo_size;
}
+static DEFINE_UART_PORT_TX_HELPER(lpuart_transmit_buffer, port, ch,
+ lpuart_tx_ready(port),
+ writeb(ch, port->membase + UARTDR));
+
static inline void lpuart32_transmit_buffer(struct lpuart_port *sport)
{
struct circ_buf *xmit = &sport->port.state->xmit;
@@ -820,7 +802,7 @@ static void lpuart_start_tx(struct uart_port *port)
lpuart_dma_tx(sport);
} else {
if (readb(port->membase + UARTSR1) & UARTSR1_TDRE)
- lpuart_transmit_buffer(sport);
+ lpuart_transmit_buffer(&sport->port);
}
}
@@ -877,7 +859,7 @@ static unsigned int lpuart32_tx_empty(struct uart_port *port)
static void lpuart_txint(struct lpuart_port *sport)
{
spin_lock(&sport->port.lock);
- lpuart_transmit_buffer(sport);
+ lpuart_transmit_buffer(&sport->port);
spin_unlock(&sport->port.lock);
}
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index a3120c3347dd..d4b6ad594d8f 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -95,7 +95,6 @@
#define ASCFSTAT_TXFREEMASK 0x3F000000
#define ASCFSTAT_TXFREEOFF 24
-static void lqasc_tx_chars(struct uart_port *port);
static struct ltq_uart_port *lqasc_port[MAXPORTS];
static struct uart_driver lqasc_reg;
@@ -139,6 +138,18 @@ lqasc_stop_tx(struct uart_port *port)
return;
}
+static bool
+lqasc_tx_ready(struct uart_port *port)
+{
+ u32 fstat = __raw_readl(port->membase + LTQ_ASC_FSTAT);
+
+ return (fstat & ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF;
+}
+
+static DEFINE_UART_PORT_TX_HELPER(lqasc_tx_chars, port, ch,
+ lqasc_tx_ready(port),
+ writeb(ch, port->membase + LTQ_ASC_TBUF));
+
static void
lqasc_start_tx(struct uart_port *port)
{
@@ -219,37 +230,6 @@ lqasc_rx_chars(struct uart_port *port)
return 0;
}
-static void
-lqasc_tx_chars(struct uart_port *port)
-{
- struct circ_buf *xmit = &port->state->xmit;
- if (uart_tx_stopped(port)) {
- lqasc_stop_tx(port);
- return;
- }
-
- while (((__raw_readl(port->membase + LTQ_ASC_FSTAT) &
- ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF) != 0) {
- if (port->x_char) {
- writeb(port->x_char, port->membase + LTQ_ASC_TBUF);
- port->icount.tx++;
- port->x_char = 0;
- continue;
- }
-
- if (uart_circ_empty(xmit))
- break;
-
- writeb(port->state->xmit.buf[port->state->xmit.tail],
- port->membase + LTQ_ASC_TBUF);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-}
-
static irqreturn_t
lqasc_tx_int(int irq, void *_port)
{
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
index 93140cac1ca1..07421b8433c8 100644
--- a/drivers/tty/serial/lpc32xx_hs.c
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -276,41 +276,17 @@ static void __serial_lpc32xx_rx(struct uart_port *port)
tty_flip_buffer_push(tport);
}
-static void serial_lpc32xx_stop_tx(struct uart_port *port);
-
-static void __serial_lpc32xx_tx(struct uart_port *port)
+static bool serial_lpc32xx_tx_ready(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
+ u32 level = readl(LPC32XX_HSUART_LEVEL(port->membase));
- if (port->x_char) {
- writel((u32)port->x_char, LPC32XX_HSUART_FIFO(port->membase));
- port->icount.tx++;
- port->x_char = 0;
- return;
- }
-
- if (uart_circ_empty(xmit) || uart_tx_stopped(port))
- goto exit_tx;
-
- /* Transfer data */
- while (LPC32XX_HSU_TX_LEV(readl(
- LPC32XX_HSUART_LEVEL(port->membase))) < 64) {
- writel((u32) xmit->buf[xmit->tail],
- LPC32XX_HSUART_FIFO(port->membase));
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
-exit_tx:
- if (uart_circ_empty(xmit))
- serial_lpc32xx_stop_tx(port);
+ return LPC32XX_HSU_TX_LEV(level) < 64;
}
+static DEFINE_UART_PORT_TX_HELPER(__serial_lpc32xx_tx, port, ch,
+ serial_lpc32xx_tx_ready(port),
+ writel(ch, LPC32XX_HSUART_FIFO(port->membase)));
+
static irqreturn_t serial_lpc32xx_interrupt(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index f4aaaadd0742..32a86d275c35 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -324,32 +324,15 @@ static void mcf_rx_chars(struct mcf_uart *pp)
/****************************************************************************/
+static DEFINE_UART_PORT_TX_HELPER(mcf_do_tx_chars, port, ch,
+ readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY,
+ writeb(ch, port->membase + MCFUART_UTB));
+
static void mcf_tx_chars(struct mcf_uart *pp)
{
struct uart_port *port = &pp->port;
- struct circ_buf *xmit = &port->state->xmit;
-
- if (port->x_char) {
- /* Send special char - probably flow control */
- writeb(port->x_char, port->membase + MCFUART_UTB);
- port->x_char = 0;
- port->icount.tx++;
- return;
- }
-
- while (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) {
- if (uart_circ_empty(xmit))
- break;
- writeb(xmit->buf[xmit->tail], port->membase + MCFUART_UTB);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1);
- port->icount.tx++;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
- if (uart_circ_empty(xmit)) {
- mcf_stop_tx(port);
+ if (!mcf_do_tx_chars(port)) {
/* Disable TX to negate RTS automatically */
if (port->rs485.flags & SER_RS485_ENABLED)
writeb(MCFUART_UCR_TXDISABLE,
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 3f1986c89694..944686a0d00d 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -1338,7 +1338,6 @@ mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser)
return 0;
}
-
static const struct uart_ops mpc52xx_uart_ops = {
.tx_empty = mpc52xx_uart_tx_empty,
.set_mctrl = mpc52xx_uart_set_mctrl,
@@ -1425,46 +1424,9 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
return psc_ops->raw_rx_rdy(port);
}
-static inline int
-mpc52xx_uart_int_tx_chars(struct uart_port *port)
-{
- struct circ_buf *xmit = &port->state->xmit;
-
- /* Process out of band chars */
- if (port->x_char) {
- psc_ops->write_char(port, port->x_char);
- port->icount.tx++;
- port->x_char = 0;
- return 1;
- }
-
- /* Nothing to do ? */
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- mpc52xx_uart_stop_tx(port);
- return 0;
- }
-
- /* Send chars */
- while (psc_ops->raw_tx_rdy(port)) {
- psc_ops->write_char(port, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- }
-
- /* Wake up */
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- /* Maybe we're done after all */
- if (uart_circ_empty(xmit)) {
- mpc52xx_uart_stop_tx(port);
- return 0;
- }
-
- return 1;
-}
+static DEFINE_UART_PORT_TX_HELPER(mpc52xx_uart_int_tx_chars, port, ch,
+ psc_ops->raw_tx_rdy(port),
+ psc_ops->write_char(port, ch));
static irqreturn_t
mpc5xxx_uart_process_int(struct uart_port *port)
diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c
index 5e9429dcc51f..e93c0bf7fa88 100644
--- a/drivers/tty/serial/mps2-uart.c
+++ b/drivers/tty/serial/mps2-uart.c
@@ -127,32 +127,9 @@ static void mps2_uart_stop_tx(struct uart_port *port)
mps2_uart_write8(port, control, UARTn_CTRL);
}
-static void mps2_uart_tx_chars(struct uart_port *port)
-{
- struct circ_buf *xmit = &port->state->xmit;
-
- while (!(mps2_uart_read8(port, UARTn_STATE) & UARTn_STATE_TX_FULL)) {
- if (port->x_char) {
- mps2_uart_write8(port, port->x_char, UARTn_DATA);
- port->x_char = 0;
- port->icount.tx++;
- continue;
- }
-
- if (uart_circ_empty(xmit) || uart_tx_stopped(port))
- break;
-
- mps2_uart_write8(port, xmit->buf[xmit->tail], UARTn_DATA);
- xmit->tail = (xmit->tail + 1) % UART_XMIT_SIZE;
- port->icount.tx++;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- mps2_uart_stop_tx(port);
-}
+static DEFINE_UART_PORT_TX_HELPER(mps2_uart_tx_chars, port, ch,
+ mps2_uart_tx_empty(port),
+ mps2_uart_write8(port, ch, UARTn_DATA));
static void mps2_uart_start_tx(struct uart_port *port)
{
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 1944daf8593a..4fb04b7b9b88 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -566,6 +566,10 @@ static int mxs_auart_dma_tx(struct mxs_auart_port *s, int size)
return 0;
}
+static DEFINE_UART_PORT_TX_HELPER(mxs_auart_do_tx_chars, port, ch,
+ !(mxs_read(to_auart_port(port), REG_STAT) & AUART_STAT_TXFF),
+ mxs_write(ch, to_auart_port(port), REG_DATA));
+
static void mxs_auart_tx_chars(struct mxs_auart_port *s)
{
struct circ_buf *xmit = &s->port.state->xmit;
@@ -603,31 +607,10 @@ static void mxs_auart_tx_chars(struct mxs_auart_port *s)
return;
}
-
- while (!(mxs_read(s, REG_STAT) & AUART_STAT_TXFF)) {
- if (s->port.x_char) {
- s->port.icount.tx++;
- mxs_write(s->port.x_char, s, REG_DATA);
- s->port.x_char = 0;
- continue;
- }
- if (!uart_circ_empty(xmit) && !uart_tx_stopped(&s->port)) {
- s->port.icount.tx++;
- mxs_write(xmit->buf[xmit->tail], s, REG_DATA);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- } else
- break;
- }
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&s->port);
-
- if (uart_circ_empty(&(s->port.state->xmit)))
- mxs_clr(AUART_INTR_TXIEN, s, REG_INTR);
- else
+ if (mxs_auart_do_tx_chars(&s->port))
mxs_set(AUART_INTR_TXIEN, s, REG_INTR);
-
- if (uart_tx_stopped(&s->port))
- mxs_auart_stop_tx(&s->port);
+ else
+ mxs_clr(AUART_INTR_TXIEN, s, REG_INTR);
}
static void mxs_auart_rx_char(struct mxs_auart_port *s)
diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c
index 888e17e3f25f..678a8ae5711a 100644
--- a/drivers/tty/serial/owl-uart.c
+++ b/drivers/tty/serial/owl-uart.c
@@ -179,38 +179,9 @@ static void owl_uart_start_tx(struct uart_port *port)
owl_uart_write(port, val, OWL_UART_CTL);
}
-static void owl_uart_send_chars(struct uart_port *port)
-{
- struct circ_buf *xmit = &port->state->xmit;
- unsigned int ch;
-
- if (port->x_char) {
- while (!(owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU))
- cpu_relax();
- owl_uart_write(port, port->x_char, OWL_UART_TXDAT);
- port->icount.tx++;
- port->x_char = 0;
- }
-
- if (uart_tx_stopped(port))
- return;
-
- while (!(owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU)) {
- if (uart_circ_empty(xmit))
- break;
-
- ch = xmit->buf[xmit->tail];
- owl_uart_write(port, ch, OWL_UART_TXDAT);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- owl_uart_stop_tx(port);
-}
+static DEFINE_UART_PORT_TX_HELPER(owl_uart_send_chars, port, ch,
+ !(owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU),
+ owl_uart_write(port, ch, OWL_UART_TXDAT));
static void owl_uart_receive_chars(struct uart_port *port)
{
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index e64e42a19d1a..738f4b20cb8e 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -226,45 +226,34 @@ sa1100_rx_chars(struct sa1100_port *sport)
tty_flip_buffer_push(&sport->port.state->port);
}
-static void sa1100_tx_chars(struct sa1100_port *sport)
+static bool sa1100_tx_ready(struct uart_port *port)
{
- struct circ_buf *xmit = &sport->port.state->xmit;
+ struct sa1100_port *sport =
+ container_of(port, struct sa1100_port, port);
- if (sport->port.x_char) {
- UART_PUT_CHAR(sport, sport->port.x_char);
- sport->port.icount.tx++;
- sport->port.x_char = 0;
- return;
- }
+ return UART_GET_UTSR1(sport) & UTSR1_TNF;
+}
+
+static void sa1100_put_char(struct uart_port *port, unsigned char ch)
+{
+ struct sa1100_port *sport =
+ container_of(port, struct sa1100_port, port);
+
+ UART_PUT_CHAR(sport, ch);
+}
+static DEFINE_UART_PORT_TX_HELPER(sa1100_do_tx_chars, port, ch,
+ sa1100_tx_ready(port), sa1100_put_char(port, ch));
+
+static void sa1100_tx_chars(struct sa1100_port *sport)
+{
/*
* Check the modem control lines before
* transmitting anything.
*/
sa1100_mctrl_check(sport);
- if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
- sa1100_stop_tx(&sport->port);
- return;
- }
-
- /*
- * Tried using FIFO (not checking TNF) for fifo fill:
- * still had the '4 bytes repeated' problem.
- */
- while (UART_GET_UTSR1(sport) & UTSR1_TNF) {
- UART_PUT_CHAR(sport, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- sport->port.icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&sport->port);
-
- if (uart_circ_empty(xmit))
- sa1100_stop_tx(&sport->port);
+ sa1100_do_tx_chars(&sport->port);
}
static irqreturn_t sa1100_int(int irq, void *dev_id)
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 6f08136ce78a..ff430a1cc3a2 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -187,37 +187,17 @@ static void handle_rx(struct uart_port *port)
tty_flip_buffer_push(tport);
}
-static void handle_tx(struct uart_port *port)
+static unsigned int vt8500_tx_empty(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
-
- if (port->x_char) {
- writeb(port->x_char, port->membase + VT8500_TXFIFO);
- port->icount.tx++;
- port->x_char = 0;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- vt8500_stop_tx(port);
- return;
- }
+ unsigned int idx = vt8500_read(port, VT8500_URFIDX) & 0x1f;
- while ((vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16) {
- if (uart_circ_empty(xmit))
- break;
-
- writeb(xmit->buf[xmit->tail], port->membase + VT8500_TXFIFO);
-
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- vt8500_stop_tx(port);
+ return idx < 16 ? TIOCSER_TEMT : 0;
}
+static DEFINE_UART_PORT_TX_HELPER(handle_tx, port, ch,
+ vt8500_tx_empty(port),
+ writeb(ch, port->membase + VT8500_TXFIFO));
+
static void vt8500_start_tx(struct uart_port *port)
{
struct vt8500_port *vt8500_port = container_of(port,
@@ -260,12 +240,6 @@ static irqreturn_t vt8500_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static unsigned int vt8500_tx_empty(struct uart_port *port)
-{
- return (vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16 ?
- TIOCSER_TEMT : 0;
-}
-
static unsigned int vt8500_get_mctrl(struct uart_port *port)
{
unsigned int usr;
--
2.37.2
^ permalink raw reply related [flat|nested] 29+ messages in thread
* [PATCH v2 3/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
2022-09-01 11:06 ` Jiri Slaby
@ 2022-09-01 11:06 ` Jiri Slaby
-1 siblings, 0 replies; 29+ messages in thread
From: Jiri Slaby @ 2022-09-01 11:06 UTC (permalink / raw)
To: gregkh
Cc: Ilpo Järvinen, linux-serial, linux-kernel, Jiri Slaby,
Russell King, Florian Fainelli, bcm-kernel-feedback-list,
Pali Rohár, Kevin Cernekee, Palmer Dabbelt, Paul Walmsley,
Orson Zhai, Baolin Wang, Chunyan Zhang, Patrice Chotard,
linux-riscv
DEFINE_UART_PORT_TX_HELPER_LIMITED() is a new helper to send characters
to the device. Use it in these drivers.
mux.c also needs to define tx_done(). But I'm not sure if the driver
really wants to wait for all the characters to dismiss from the HW fifo
at this code point. Hence I marked this as FIXME.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: "Pali Rohár" <pali@kernel.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: linux-riscv@lists.infradead.org
---
drivers/tty/serial/21285.c | 33 ++++--------------
drivers/tty/serial/altera_jtaguart.c | 42 ++++++-----------------
drivers/tty/serial/amba-pl010.c | 37 +++-----------------
drivers/tty/serial/apbuart.c | 36 ++++----------------
drivers/tty/serial/bcm63xx_uart.c | 47 +++++---------------------
drivers/tty/serial/mux.c | 46 ++++++++-----------------
drivers/tty/serial/mvebu-uart.c | 40 ++++------------------
drivers/tty/serial/omap-serial.c | 47 +++++++-------------------
drivers/tty/serial/pxa.c | 39 +++++-----------------
drivers/tty/serial/rp2.c | 36 ++++----------------
drivers/tty/serial/serial_txx9.c | 37 +++-----------------
drivers/tty/serial/sifive.c | 45 +++----------------------
drivers/tty/serial/sprd_serial.c | 38 +++------------------
drivers/tty/serial/st-asc.c | 50 ++++------------------------
14 files changed, 103 insertions(+), 470 deletions(-)
diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c
index 7520cc02fd4d..a23401aa0847 100644
--- a/drivers/tty/serial/21285.c
+++ b/drivers/tty/serial/21285.c
@@ -151,38 +151,17 @@ static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(serial21285_do_tx_chars, port, ch,
+ !(*CSR_UARTFLG & 0x20),
+ *CSR_UARTDR = ch,
+ ({}));
+
static irqreturn_t serial21285_tx_chars(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- struct circ_buf *xmit = &port->state->xmit;
- int count = 256;
-
- if (port->x_char) {
- *CSR_UARTDR = port->x_char;
- port->icount.tx++;
- port->x_char = 0;
- goto out;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- serial21285_stop_tx(port);
- goto out;
- }
-
- do {
- *CSR_UARTDR = xmit->buf[xmit->tail];
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- } while (--count > 0 && !(*CSR_UARTFLG & 0x20));
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
- if (uart_circ_empty(xmit))
- serial21285_stop_tx(port);
+ serial21285_do_tx_chars(port, 256);
- out:
return IRQ_HANDLED;
}
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index cb791c5149a3..928ed419e969 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -134,42 +134,20 @@ static void altera_jtaguart_rx_chars(struct altera_jtaguart *pp)
tty_flip_buffer_push(&port->state->port);
}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(altera_jtaguart_do_tx_chars, port, ch,
+ true,
+ writel(ch, port->membase + ALTERA_JTAGUART_DATA_REG),
+ ({}));
+
static void altera_jtaguart_tx_chars(struct altera_jtaguart *pp)
{
struct uart_port *port = &pp->port;
- struct circ_buf *xmit = &port->state->xmit;
- unsigned int pending, count;
-
- if (port->x_char) {
- /* Send special char - probably flow control */
- writel(port->x_char, port->membase + ALTERA_JTAGUART_DATA_REG);
- port->x_char = 0;
- port->icount.tx++;
- return;
- }
-
- pending = uart_circ_chars_pending(xmit);
- if (pending > 0) {
- count = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) &
- ALTERA_JTAGUART_CONTROL_WSPACE_MSK) >>
- ALTERA_JTAGUART_CONTROL_WSPACE_OFF;
- if (count > pending)
- count = pending;
- if (count > 0) {
- pending -= count;
- while (count--) {
- writel(xmit->buf[xmit->tail],
- port->membase + ALTERA_JTAGUART_DATA_REG);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- }
- if (pending < WAKEUP_CHARS)
- uart_write_wakeup(port);
- }
- }
+ unsigned int space;
- if (pending == 0)
- altera_jtaguart_stop_tx(port);
+ space = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) &
+ ALTERA_JTAGUART_CONTROL_WSPACE_MSK) >>
+ ALTERA_JTAGUART_CONTROL_WSPACE_OFF;
+ altera_jtaguart_do_tx_chars(port, space);
}
static irqreturn_t altera_jtaguart_interrupt(int irq, void *data)
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index fae0b581ff42..cc95e5546b79 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -162,37 +162,10 @@ static void pl010_rx_chars(struct uart_port *port)
tty_flip_buffer_push(&port->state->port);
}
-static void pl010_tx_chars(struct uart_port *port)
-{
- struct circ_buf *xmit = &port->state->xmit;
- int count;
-
- if (port->x_char) {
- writel(port->x_char, port->membase + UART01x_DR);
- port->icount.tx++;
- port->x_char = 0;
- return;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- pl010_stop_tx(port);
- return;
- }
-
- count = port->fifosize >> 1;
- do {
- writel(xmit->buf[xmit->tail], port->membase + UART01x_DR);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- } while (--count > 0);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- pl010_stop_tx(port);
-}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(pl010_tx_chars, port, ch,
+ true,
+ writel(ch, port->membase + UART01x_DR),
+ ({}));
static void pl010_modem_status(struct uart_amba_port *uap)
{
@@ -238,7 +211,7 @@ static irqreturn_t pl010_int(int irq, void *dev_id)
if (status & UART010_IIR_MIS)
pl010_modem_status(uap);
if (status & UART010_IIR_TIS)
- pl010_tx_chars(port);
+ pl010_tx_chars(port, port->fifosize >> 1);
if (pass_counter-- == 0)
break;
diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c
index 9ef82d870ff2..06c880ed7036 100644
--- a/drivers/tty/serial/apbuart.c
+++ b/drivers/tty/serial/apbuart.c
@@ -120,38 +120,14 @@ static void apbuart_rx_chars(struct uart_port *port)
tty_flip_buffer_push(&port->state->port);
}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(apbuart_do_tx_chars, port, ch,
+ true,
+ UART_PUT_CHAR(port, ch),
+ ({}));
+
static void apbuart_tx_chars(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
- int count;
-
- if (port->x_char) {
- UART_PUT_CHAR(port, port->x_char);
- port->icount.tx++;
- port->x_char = 0;
- return;
- }
-
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- apbuart_stop_tx(port);
- return;
- }
-
- /* amba: fill FIFO */
- count = port->fifosize >> 1;
- do {
- UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- } while (--count > 0);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- apbuart_stop_tx(port);
+ apbuart_do_tx_chars(port, port->fifosize >> 1);
}
static irqreturn_t apbuart_int(int irq, void *dev_id)
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index 53b43174aa40..1b9f0cec3aa1 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -297,59 +297,30 @@ static void bcm_uart_do_rx(struct uart_port *port)
tty_flip_buffer_push(tty_port);
}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(bcm_uart_tx, port, ch,
+ true,
+ bcm_uart_writel(port, ch, UART_FIFO_REG),
+ ({}));
+
/*
* fill tx fifo with chars to send, stop when fifo is about to be full
* or when all chars have been sent.
*/
static void bcm_uart_do_tx(struct uart_port *port)
{
- struct circ_buf *xmit;
- unsigned int val, max_count;
-
- if (port->x_char) {
- bcm_uart_writel(port, port->x_char, UART_FIFO_REG);
- port->icount.tx++;
- port->x_char = 0;
- return;
- }
-
- if (uart_tx_stopped(port)) {
- bcm_uart_stop_tx(port);
- return;
- }
-
- xmit = &port->state->xmit;
- if (uart_circ_empty(xmit))
- goto txq_empty;
+ unsigned int val, pending;
val = bcm_uart_readl(port, UART_MCTL_REG);
val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT;
- max_count = port->fifosize - val;
-
- while (max_count--) {
- unsigned int c;
- c = xmit->buf[xmit->tail];
- bcm_uart_writel(port, c, UART_FIFO_REG);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- goto txq_empty;
- return;
+ pending = bcm_uart_tx(port, port->fifosize - val);
+ if (pending)
+ return;
-txq_empty:
/* nothing to send, disable transmit interrupt */
val = bcm_uart_readl(port, UART_IR_REG);
val &= ~UART_TX_INT_MASK;
bcm_uart_writel(port, val, UART_IR_REG);
- return;
}
/*
diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c
index 0ba0f4d9459d..f65f694fdecd 100644
--- a/drivers/tty/serial/mux.c
+++ b/drivers/tty/serial/mux.c
@@ -171,6 +171,18 @@ static void mux_break_ctl(struct uart_port *port, int break_state)
{
}
+static void mux_tx_done(struct uart_port *port)
+{
+ /* FIXME js: really needs to wait? */
+ while (UART_GET_FIFO_CNT(port))
+ udelay(1);
+}
+
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(mux_transmit, port, ch,
+ true,
+ UART_PUT_CHAR(port, ch),
+ mux_tx_done(port));
+
/**
* mux_write - Write chars to the mux fifo.
* @port: Ptr to the uart_port.
@@ -180,39 +192,7 @@ static void mux_break_ctl(struct uart_port *port, int break_state)
*/
static void mux_write(struct uart_port *port)
{
- int count;
- struct circ_buf *xmit = &port->state->xmit;
-
- if(port->x_char) {
- UART_PUT_CHAR(port, port->x_char);
- port->icount.tx++;
- port->x_char = 0;
- return;
- }
-
- if(uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- mux_stop_tx(port);
- return;
- }
-
- count = (port->fifosize) - UART_GET_FIFO_CNT(port);
- do {
- UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if(uart_circ_empty(xmit))
- break;
-
- } while(--count > 0);
-
- while(UART_GET_FIFO_CNT(port))
- udelay(1);
-
- if(uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- mux_stop_tx(port);
+ mux_transmit(port, port->fifosize - UART_GET_FIFO_CNT(port));
}
/**
diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index 65eaecd10b7c..1dc0d9bcf797 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -333,42 +333,14 @@ static void mvebu_uart_rx_chars(struct uart_port *port, unsigned int status)
tty_flip_buffer_push(tport);
}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(mvebu_uart_do_tx_chars, port, ch,
+ !(readl(port->membase + UART_STAT) & STAT_TX_FIFO_FUL),
+ writel(ch, port->membase + UART_TSH(port)),
+ ({}));
+
static void mvebu_uart_tx_chars(struct uart_port *port, unsigned int status)
{
- struct circ_buf *xmit = &port->state->xmit;
- unsigned int count;
- unsigned int st;
-
- if (port->x_char) {
- writel(port->x_char, port->membase + UART_TSH(port));
- port->icount.tx++;
- port->x_char = 0;
- return;
- }
-
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- mvebu_uart_stop_tx(port);
- return;
- }
-
- for (count = 0; count < port->fifosize; count++) {
- writel(xmit->buf[xmit->tail], port->membase + UART_TSH(port));
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
-
- if (uart_circ_empty(xmit))
- break;
-
- st = readl(port->membase + UART_STAT);
- if (st & STAT_TX_FIFO_FUL)
- break;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- mvebu_uart_stop_tx(port);
+ mvebu_uart_do_tx_chars(port, port->fifosize);
}
static irqreturn_t mvebu_uart_isr(int irq, void *dev_id)
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 0aa666e247d5..a0ccde3b33e3 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -337,45 +337,22 @@ static void serial_omap_stop_rx(struct uart_port *port)
serial_out(up, UART_IER, up->ier);
}
-static void transmit_chars(struct uart_omap_port *up, unsigned int lsr)
+static void serial_omap_put_char(struct uart_port *port, unsigned char ch)
{
- struct circ_buf *xmit = &up->port.state->xmit;
- int count;
-
- if (up->port.x_char) {
- serial_out(up, UART_TX, up->port.x_char);
- up->port.icount.tx++;
- up->port.x_char = 0;
- if ((up->port.rs485.flags & SER_RS485_ENABLED) &&
- !(up->port.rs485.flags & SER_RS485_RX_DURING_TX))
- up->rs485_tx_filter_count++;
-
- return;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
- serial_omap_stop_tx(&up->port);
- return;
- }
- count = up->port.fifosize / 4;
- do {
- serial_out(up, UART_TX, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- up->port.icount.tx++;
- if ((up->port.rs485.flags & SER_RS485_ENABLED) &&
- !(up->port.rs485.flags & SER_RS485_RX_DURING_TX))
- up->rs485_tx_filter_count++;
-
- if (uart_circ_empty(xmit))
- break;
- } while (--count > 0);
+ struct uart_omap_port *up = to_uart_omap_port(port);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&up->port);
+ serial_out(up, UART_TX, ch);
- if (uart_circ_empty(xmit))
- serial_omap_stop_tx(&up->port);
+ if ((up->port.rs485.flags & SER_RS485_ENABLED) &&
+ !(up->port.rs485.flags & SER_RS485_RX_DURING_TX))
+ up->rs485_tx_filter_count++;
}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(transmit_chars, port, ch,
+ true,
+ serial_omap_put_char(port, ch),
+ ({}));
+
static inline void serial_omap_enable_ier_thri(struct uart_omap_port *up)
{
if (!(up->ier & UART_IER_THRI)) {
@@ -573,7 +550,7 @@ static irqreturn_t serial_omap_irq(int irq, void *dev_id)
check_modem_status(up);
break;
case UART_IIR_THRI:
- transmit_chars(up, lsr);
+ transmit_chars(&up->port, up->port.fifosize / 4);
break;
case UART_IIR_RX_TIMEOUT:
case UART_IIR_RDI:
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 9309ffd87c8e..c1376e8adbf4 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -172,39 +172,18 @@ static inline void receive_chars(struct uart_pxa_port *up, int *status)
serial_out(up, UART_IER, up->ier);
}
-static void transmit_chars(struct uart_pxa_port *up)
+static void serial_pxa_put_char(struct uart_port *port, u8 ch)
{
- struct circ_buf *xmit = &up->port.state->xmit;
- int count;
-
- if (up->port.x_char) {
- serial_out(up, UART_TX, up->port.x_char);
- up->port.icount.tx++;
- up->port.x_char = 0;
- return;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
- serial_pxa_stop_tx(&up->port);
- return;
- }
-
- count = up->port.fifosize / 2;
- do {
- serial_out(up, UART_TX, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- up->port.icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- } while (--count > 0);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&up->port);
-
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
- if (uart_circ_empty(xmit))
- serial_pxa_stop_tx(&up->port);
+ serial_out(up, UART_TX, ch);
}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(transmit_chars, port, ch,
+ true,
+ serial_pxa_put_char(port, ch),
+ ({}));
+
static void serial_pxa_start_tx(struct uart_port *port)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
@@ -254,7 +233,7 @@ static inline irqreturn_t serial_pxa_irq(int irq, void *dev_id)
receive_chars(up, &lsr);
check_modem_status(up);
if (lsr & UART_LSR_THRE)
- transmit_chars(up);
+ transmit_chars(&up->port, up->port.fifosize / 2);
spin_unlock(&up->port.lock);
return IRQ_HANDLED;
}
diff --git a/drivers/tty/serial/rp2.c b/drivers/tty/serial/rp2.c
index 6689d8add8f7..8719022b189d 100644
--- a/drivers/tty/serial/rp2.c
+++ b/drivers/tty/serial/rp2.c
@@ -426,35 +426,10 @@ static void rp2_rx_chars(struct rp2_uart_port *up)
tty_flip_buffer_push(port);
}
-static void rp2_tx_chars(struct rp2_uart_port *up)
-{
- u16 max_tx = FIFO_SIZE - readw(up->base + RP2_TX_FIFO_COUNT);
- struct circ_buf *xmit = &up->port.state->xmit;
-
- if (uart_tx_stopped(&up->port)) {
- rp2_uart_stop_tx(&up->port);
- return;
- }
-
- for (; max_tx != 0; max_tx--) {
- if (up->port.x_char) {
- writeb(up->port.x_char, up->base + RP2_DATA_BYTE);
- up->port.x_char = 0;
- up->port.icount.tx++;
- continue;
- }
- if (uart_circ_empty(xmit)) {
- rp2_uart_stop_tx(&up->port);
- break;
- }
- writeb(xmit->buf[xmit->tail], up->base + RP2_DATA_BYTE);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- up->port.icount.tx++;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&up->port);
-}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(rp2_tx_chars, port, ch,
+ true,
+ writeb(ch, port_to_up(port)->base + RP2_DATA_BYTE),
+ ({}));
static void rp2_ch_interrupt(struct rp2_uart_port *up)
{
@@ -472,7 +447,8 @@ static void rp2_ch_interrupt(struct rp2_uart_port *up)
if (status & RP2_CHAN_STAT_RXDATA_m)
rp2_rx_chars(up);
if (status & RP2_CHAN_STAT_TXEMPTY_m)
- rp2_tx_chars(up);
+ rp2_tx_chars(&up->port,
+ FIFO_SIZE - readw(up->base + RP2_TX_FIFO_COUNT));
if (status & RP2_CHAN_STAT_MS_CHANGED_MASK)
wake_up_interruptible(&up->port.state->port.delta_msr_wait);
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index 228e380db080..855ad3b457f7 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -319,37 +319,10 @@ receive_chars(struct uart_port *up, unsigned int *status)
*status = disr;
}
-static inline void transmit_chars(struct uart_port *up)
-{
- struct circ_buf *xmit = &up->state->xmit;
- int count;
-
- if (up->x_char) {
- sio_out(up, TXX9_SITFIFO, up->x_char);
- up->icount.tx++;
- up->x_char = 0;
- return;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(up)) {
- serial_txx9_stop_tx(up);
- return;
- }
-
- count = TXX9_SIO_TX_FIFO;
- do {
- sio_out(up, TXX9_SITFIFO, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- up->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- } while (--count > 0);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(up);
-
- if (uart_circ_empty(xmit))
- serial_txx9_stop_tx(up);
-}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(transmit_chars, port, ch,
+ true,
+ sio_out(port, TXX9_SITFIFO, ch),
+ ({}));
static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id)
{
@@ -371,7 +344,7 @@ static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id)
if (status & TXX9_SIDISR_RDIS)
receive_chars(up, &status);
if (status & TXX9_SIDISR_TDIS)
- transmit_chars(up);
+ transmit_chars(up, TXX9_SIO_TX_FIFO);
/* Clear TX/RX Int. Status */
sio_mask(up, TXX9_SIDISR,
TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS |
diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c
index 5c3a07546a58..78180f936bf3 100644
--- a/drivers/tty/serial/sifive.c
+++ b/drivers/tty/serial/sifive.c
@@ -277,45 +277,10 @@ static void __ssp_transmit_char(struct sifive_serial_port *ssp, int ch)
__ssp_writel(ch, SIFIVE_SERIAL_TXDATA_OFFS, ssp);
}
-/**
- * __ssp_transmit_chars() - enqueue multiple bytes onto the TX FIFO
- * @ssp: pointer to a struct sifive_serial_port
- *
- * Transfer up to a TX FIFO size's worth of characters from the Linux serial
- * transmit buffer to the SiFive UART TX FIFO.
- *
- * Context: Any context. Expects @ssp->port.lock to be held by caller.
- */
-static void __ssp_transmit_chars(struct sifive_serial_port *ssp)
-{
- struct circ_buf *xmit = &ssp->port.state->xmit;
- int count;
-
- if (ssp->port.x_char) {
- __ssp_transmit_char(ssp, ssp->port.x_char);
- ssp->port.icount.tx++;
- ssp->port.x_char = 0;
- return;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(&ssp->port)) {
- sifive_serial_stop_tx(&ssp->port);
- return;
- }
- count = SIFIVE_TX_FIFO_DEPTH;
- do {
- __ssp_transmit_char(ssp, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- ssp->port.icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- } while (--count > 0);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&ssp->port);
-
- if (uart_circ_empty(xmit))
- sifive_serial_stop_tx(&ssp->port);
-}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(__ssp_transmit_chars, port, ch,
+ true,
+ __ssp_transmit_char(port_to_sifive_serial_port(port), ch),
+ ({}));
/**
* __ssp_enable_txwm() - enable transmit watermark interrupts
@@ -553,7 +518,7 @@ static irqreturn_t sifive_serial_irq(int irq, void *dev_id)
if (ip & SIFIVE_SERIAL_IP_RXWM_MASK)
__ssp_receive_chars(ssp);
if (ip & SIFIVE_SERIAL_IP_TXWM_MASK)
- __ssp_transmit_chars(ssp);
+ __ssp_transmit_chars(&ssp->port, SIFIVE_TX_FIFO_DEPTH);
spin_unlock(&ssp->port.lock);
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index 4329b9c9cbf0..e217b7ab69af 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -624,38 +624,10 @@ static inline void sprd_rx(struct uart_port *port)
tty_flip_buffer_push(tty);
}
-static inline void sprd_tx(struct uart_port *port)
-{
- struct circ_buf *xmit = &port->state->xmit;
- int count;
-
- if (port->x_char) {
- serial_out(port, SPRD_TXD, port->x_char);
- port->icount.tx++;
- port->x_char = 0;
- return;
- }
-
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- sprd_stop_tx(port);
- return;
- }
-
- count = THLD_TX_EMPTY;
- do {
- serial_out(port, SPRD_TXD, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- } while (--count > 0);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- sprd_stop_tx(port);
-}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(sprd_tx, port, ch,
+ true,
+ serial_out(port, SPRD_TXD, ch),
+ ({}));
/* this handles the interrupt from one port */
static irqreturn_t sprd_handle_irq(int irq, void *dev_id)
@@ -683,7 +655,7 @@ static irqreturn_t sprd_handle_irq(int irq, void *dev_id)
sprd_rx(port);
if (ims & SPRD_IMSR_TX_FIFO_EMPTY)
- sprd_tx(port);
+ sprd_tx(port, THLD_TX_EMPTY);
spin_unlock(&port->lock);
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index cce42f4c9bc2..f5dd3fa4bf26 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -230,6 +230,11 @@ static inline unsigned asc_hw_txroom(struct uart_port *port)
return 0;
}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(asc_do_transmit_chars, port, ch,
+ true,
+ asc_out(port, ASC_TXBUF, ch),
+ ({}));
+
/*
* Start transmitting chars.
* This is called from both interrupt and task level.
@@ -237,50 +242,7 @@ static inline unsigned asc_hw_txroom(struct uart_port *port)
*/
static void asc_transmit_chars(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
- int txroom;
- unsigned char c;
-
- txroom = asc_hw_txroom(port);
-
- if ((txroom != 0) && port->x_char) {
- c = port->x_char;
- port->x_char = 0;
- asc_out(port, ASC_TXBUF, c);
- port->icount.tx++;
- txroom = asc_hw_txroom(port);
- }
-
- if (uart_tx_stopped(port)) {
- /*
- * We should try and stop the hardware here, but I
- * don't think the ASC has any way to do that.
- */
- asc_disable_tx_interrupts(port);
- return;
- }
-
- if (uart_circ_empty(xmit)) {
- asc_disable_tx_interrupts(port);
- return;
- }
-
- if (txroom == 0)
- return;
-
- do {
- c = xmit->buf[xmit->tail];
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- asc_out(port, ASC_TXBUF, c);
- port->icount.tx++;
- txroom--;
- } while ((txroom > 0) && (!uart_circ_empty(xmit)));
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- asc_disable_tx_interrupts(port);
+ asc_do_transmit_chars(port, asc_hw_txroom(port));
}
static void asc_receive_chars(struct uart_port *port)
--
2.37.2
^ permalink raw reply related [flat|nested] 29+ messages in thread
* [PATCH v2 3/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
@ 2022-09-01 11:06 ` Jiri Slaby
0 siblings, 0 replies; 29+ messages in thread
From: Jiri Slaby @ 2022-09-01 11:06 UTC (permalink / raw)
To: gregkh
Cc: Ilpo Järvinen, linux-serial, linux-kernel, Jiri Slaby,
Russell King, Florian Fainelli, bcm-kernel-feedback-list,
Pali Rohár, Kevin Cernekee, Palmer Dabbelt, Paul Walmsley,
Orson Zhai, Baolin Wang, Chunyan Zhang, Patrice Chotard,
linux-riscv
DEFINE_UART_PORT_TX_HELPER_LIMITED() is a new helper to send characters
to the device. Use it in these drivers.
mux.c also needs to define tx_done(). But I'm not sure if the driver
really wants to wait for all the characters to dismiss from the HW fifo
at this code point. Hence I marked this as FIXME.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: "Pali Rohár" <pali@kernel.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: linux-riscv@lists.infradead.org
---
drivers/tty/serial/21285.c | 33 ++++--------------
drivers/tty/serial/altera_jtaguart.c | 42 ++++++-----------------
drivers/tty/serial/amba-pl010.c | 37 +++-----------------
drivers/tty/serial/apbuart.c | 36 ++++----------------
drivers/tty/serial/bcm63xx_uart.c | 47 +++++---------------------
drivers/tty/serial/mux.c | 46 ++++++++-----------------
drivers/tty/serial/mvebu-uart.c | 40 ++++------------------
drivers/tty/serial/omap-serial.c | 47 +++++++-------------------
drivers/tty/serial/pxa.c | 39 +++++-----------------
drivers/tty/serial/rp2.c | 36 ++++----------------
drivers/tty/serial/serial_txx9.c | 37 +++-----------------
drivers/tty/serial/sifive.c | 45 +++----------------------
drivers/tty/serial/sprd_serial.c | 38 +++------------------
drivers/tty/serial/st-asc.c | 50 ++++------------------------
14 files changed, 103 insertions(+), 470 deletions(-)
diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c
index 7520cc02fd4d..a23401aa0847 100644
--- a/drivers/tty/serial/21285.c
+++ b/drivers/tty/serial/21285.c
@@ -151,38 +151,17 @@ static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(serial21285_do_tx_chars, port, ch,
+ !(*CSR_UARTFLG & 0x20),
+ *CSR_UARTDR = ch,
+ ({}));
+
static irqreturn_t serial21285_tx_chars(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- struct circ_buf *xmit = &port->state->xmit;
- int count = 256;
-
- if (port->x_char) {
- *CSR_UARTDR = port->x_char;
- port->icount.tx++;
- port->x_char = 0;
- goto out;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- serial21285_stop_tx(port);
- goto out;
- }
-
- do {
- *CSR_UARTDR = xmit->buf[xmit->tail];
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- } while (--count > 0 && !(*CSR_UARTFLG & 0x20));
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
- if (uart_circ_empty(xmit))
- serial21285_stop_tx(port);
+ serial21285_do_tx_chars(port, 256);
- out:
return IRQ_HANDLED;
}
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index cb791c5149a3..928ed419e969 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -134,42 +134,20 @@ static void altera_jtaguart_rx_chars(struct altera_jtaguart *pp)
tty_flip_buffer_push(&port->state->port);
}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(altera_jtaguart_do_tx_chars, port, ch,
+ true,
+ writel(ch, port->membase + ALTERA_JTAGUART_DATA_REG),
+ ({}));
+
static void altera_jtaguart_tx_chars(struct altera_jtaguart *pp)
{
struct uart_port *port = &pp->port;
- struct circ_buf *xmit = &port->state->xmit;
- unsigned int pending, count;
-
- if (port->x_char) {
- /* Send special char - probably flow control */
- writel(port->x_char, port->membase + ALTERA_JTAGUART_DATA_REG);
- port->x_char = 0;
- port->icount.tx++;
- return;
- }
-
- pending = uart_circ_chars_pending(xmit);
- if (pending > 0) {
- count = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) &
- ALTERA_JTAGUART_CONTROL_WSPACE_MSK) >>
- ALTERA_JTAGUART_CONTROL_WSPACE_OFF;
- if (count > pending)
- count = pending;
- if (count > 0) {
- pending -= count;
- while (count--) {
- writel(xmit->buf[xmit->tail],
- port->membase + ALTERA_JTAGUART_DATA_REG);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- }
- if (pending < WAKEUP_CHARS)
- uart_write_wakeup(port);
- }
- }
+ unsigned int space;
- if (pending == 0)
- altera_jtaguart_stop_tx(port);
+ space = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) &
+ ALTERA_JTAGUART_CONTROL_WSPACE_MSK) >>
+ ALTERA_JTAGUART_CONTROL_WSPACE_OFF;
+ altera_jtaguart_do_tx_chars(port, space);
}
static irqreturn_t altera_jtaguart_interrupt(int irq, void *data)
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index fae0b581ff42..cc95e5546b79 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -162,37 +162,10 @@ static void pl010_rx_chars(struct uart_port *port)
tty_flip_buffer_push(&port->state->port);
}
-static void pl010_tx_chars(struct uart_port *port)
-{
- struct circ_buf *xmit = &port->state->xmit;
- int count;
-
- if (port->x_char) {
- writel(port->x_char, port->membase + UART01x_DR);
- port->icount.tx++;
- port->x_char = 0;
- return;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- pl010_stop_tx(port);
- return;
- }
-
- count = port->fifosize >> 1;
- do {
- writel(xmit->buf[xmit->tail], port->membase + UART01x_DR);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- } while (--count > 0);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- pl010_stop_tx(port);
-}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(pl010_tx_chars, port, ch,
+ true,
+ writel(ch, port->membase + UART01x_DR),
+ ({}));
static void pl010_modem_status(struct uart_amba_port *uap)
{
@@ -238,7 +211,7 @@ static irqreturn_t pl010_int(int irq, void *dev_id)
if (status & UART010_IIR_MIS)
pl010_modem_status(uap);
if (status & UART010_IIR_TIS)
- pl010_tx_chars(port);
+ pl010_tx_chars(port, port->fifosize >> 1);
if (pass_counter-- == 0)
break;
diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c
index 9ef82d870ff2..06c880ed7036 100644
--- a/drivers/tty/serial/apbuart.c
+++ b/drivers/tty/serial/apbuart.c
@@ -120,38 +120,14 @@ static void apbuart_rx_chars(struct uart_port *port)
tty_flip_buffer_push(&port->state->port);
}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(apbuart_do_tx_chars, port, ch,
+ true,
+ UART_PUT_CHAR(port, ch),
+ ({}));
+
static void apbuart_tx_chars(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
- int count;
-
- if (port->x_char) {
- UART_PUT_CHAR(port, port->x_char);
- port->icount.tx++;
- port->x_char = 0;
- return;
- }
-
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- apbuart_stop_tx(port);
- return;
- }
-
- /* amba: fill FIFO */
- count = port->fifosize >> 1;
- do {
- UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- } while (--count > 0);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- apbuart_stop_tx(port);
+ apbuart_do_tx_chars(port, port->fifosize >> 1);
}
static irqreturn_t apbuart_int(int irq, void *dev_id)
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index 53b43174aa40..1b9f0cec3aa1 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -297,59 +297,30 @@ static void bcm_uart_do_rx(struct uart_port *port)
tty_flip_buffer_push(tty_port);
}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(bcm_uart_tx, port, ch,
+ true,
+ bcm_uart_writel(port, ch, UART_FIFO_REG),
+ ({}));
+
/*
* fill tx fifo with chars to send, stop when fifo is about to be full
* or when all chars have been sent.
*/
static void bcm_uart_do_tx(struct uart_port *port)
{
- struct circ_buf *xmit;
- unsigned int val, max_count;
-
- if (port->x_char) {
- bcm_uart_writel(port, port->x_char, UART_FIFO_REG);
- port->icount.tx++;
- port->x_char = 0;
- return;
- }
-
- if (uart_tx_stopped(port)) {
- bcm_uart_stop_tx(port);
- return;
- }
-
- xmit = &port->state->xmit;
- if (uart_circ_empty(xmit))
- goto txq_empty;
+ unsigned int val, pending;
val = bcm_uart_readl(port, UART_MCTL_REG);
val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT;
- max_count = port->fifosize - val;
-
- while (max_count--) {
- unsigned int c;
- c = xmit->buf[xmit->tail];
- bcm_uart_writel(port, c, UART_FIFO_REG);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- goto txq_empty;
- return;
+ pending = bcm_uart_tx(port, port->fifosize - val);
+ if (pending)
+ return;
-txq_empty:
/* nothing to send, disable transmit interrupt */
val = bcm_uart_readl(port, UART_IR_REG);
val &= ~UART_TX_INT_MASK;
bcm_uart_writel(port, val, UART_IR_REG);
- return;
}
/*
diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c
index 0ba0f4d9459d..f65f694fdecd 100644
--- a/drivers/tty/serial/mux.c
+++ b/drivers/tty/serial/mux.c
@@ -171,6 +171,18 @@ static void mux_break_ctl(struct uart_port *port, int break_state)
{
}
+static void mux_tx_done(struct uart_port *port)
+{
+ /* FIXME js: really needs to wait? */
+ while (UART_GET_FIFO_CNT(port))
+ udelay(1);
+}
+
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(mux_transmit, port, ch,
+ true,
+ UART_PUT_CHAR(port, ch),
+ mux_tx_done(port));
+
/**
* mux_write - Write chars to the mux fifo.
* @port: Ptr to the uart_port.
@@ -180,39 +192,7 @@ static void mux_break_ctl(struct uart_port *port, int break_state)
*/
static void mux_write(struct uart_port *port)
{
- int count;
- struct circ_buf *xmit = &port->state->xmit;
-
- if(port->x_char) {
- UART_PUT_CHAR(port, port->x_char);
- port->icount.tx++;
- port->x_char = 0;
- return;
- }
-
- if(uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- mux_stop_tx(port);
- return;
- }
-
- count = (port->fifosize) - UART_GET_FIFO_CNT(port);
- do {
- UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if(uart_circ_empty(xmit))
- break;
-
- } while(--count > 0);
-
- while(UART_GET_FIFO_CNT(port))
- udelay(1);
-
- if(uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- mux_stop_tx(port);
+ mux_transmit(port, port->fifosize - UART_GET_FIFO_CNT(port));
}
/**
diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index 65eaecd10b7c..1dc0d9bcf797 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -333,42 +333,14 @@ static void mvebu_uart_rx_chars(struct uart_port *port, unsigned int status)
tty_flip_buffer_push(tport);
}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(mvebu_uart_do_tx_chars, port, ch,
+ !(readl(port->membase + UART_STAT) & STAT_TX_FIFO_FUL),
+ writel(ch, port->membase + UART_TSH(port)),
+ ({}));
+
static void mvebu_uart_tx_chars(struct uart_port *port, unsigned int status)
{
- struct circ_buf *xmit = &port->state->xmit;
- unsigned int count;
- unsigned int st;
-
- if (port->x_char) {
- writel(port->x_char, port->membase + UART_TSH(port));
- port->icount.tx++;
- port->x_char = 0;
- return;
- }
-
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- mvebu_uart_stop_tx(port);
- return;
- }
-
- for (count = 0; count < port->fifosize; count++) {
- writel(xmit->buf[xmit->tail], port->membase + UART_TSH(port));
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
-
- if (uart_circ_empty(xmit))
- break;
-
- st = readl(port->membase + UART_STAT);
- if (st & STAT_TX_FIFO_FUL)
- break;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- mvebu_uart_stop_tx(port);
+ mvebu_uart_do_tx_chars(port, port->fifosize);
}
static irqreturn_t mvebu_uart_isr(int irq, void *dev_id)
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 0aa666e247d5..a0ccde3b33e3 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -337,45 +337,22 @@ static void serial_omap_stop_rx(struct uart_port *port)
serial_out(up, UART_IER, up->ier);
}
-static void transmit_chars(struct uart_omap_port *up, unsigned int lsr)
+static void serial_omap_put_char(struct uart_port *port, unsigned char ch)
{
- struct circ_buf *xmit = &up->port.state->xmit;
- int count;
-
- if (up->port.x_char) {
- serial_out(up, UART_TX, up->port.x_char);
- up->port.icount.tx++;
- up->port.x_char = 0;
- if ((up->port.rs485.flags & SER_RS485_ENABLED) &&
- !(up->port.rs485.flags & SER_RS485_RX_DURING_TX))
- up->rs485_tx_filter_count++;
-
- return;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
- serial_omap_stop_tx(&up->port);
- return;
- }
- count = up->port.fifosize / 4;
- do {
- serial_out(up, UART_TX, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- up->port.icount.tx++;
- if ((up->port.rs485.flags & SER_RS485_ENABLED) &&
- !(up->port.rs485.flags & SER_RS485_RX_DURING_TX))
- up->rs485_tx_filter_count++;
-
- if (uart_circ_empty(xmit))
- break;
- } while (--count > 0);
+ struct uart_omap_port *up = to_uart_omap_port(port);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&up->port);
+ serial_out(up, UART_TX, ch);
- if (uart_circ_empty(xmit))
- serial_omap_stop_tx(&up->port);
+ if ((up->port.rs485.flags & SER_RS485_ENABLED) &&
+ !(up->port.rs485.flags & SER_RS485_RX_DURING_TX))
+ up->rs485_tx_filter_count++;
}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(transmit_chars, port, ch,
+ true,
+ serial_omap_put_char(port, ch),
+ ({}));
+
static inline void serial_omap_enable_ier_thri(struct uart_omap_port *up)
{
if (!(up->ier & UART_IER_THRI)) {
@@ -573,7 +550,7 @@ static irqreturn_t serial_omap_irq(int irq, void *dev_id)
check_modem_status(up);
break;
case UART_IIR_THRI:
- transmit_chars(up, lsr);
+ transmit_chars(&up->port, up->port.fifosize / 4);
break;
case UART_IIR_RX_TIMEOUT:
case UART_IIR_RDI:
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 9309ffd87c8e..c1376e8adbf4 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -172,39 +172,18 @@ static inline void receive_chars(struct uart_pxa_port *up, int *status)
serial_out(up, UART_IER, up->ier);
}
-static void transmit_chars(struct uart_pxa_port *up)
+static void serial_pxa_put_char(struct uart_port *port, u8 ch)
{
- struct circ_buf *xmit = &up->port.state->xmit;
- int count;
-
- if (up->port.x_char) {
- serial_out(up, UART_TX, up->port.x_char);
- up->port.icount.tx++;
- up->port.x_char = 0;
- return;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
- serial_pxa_stop_tx(&up->port);
- return;
- }
-
- count = up->port.fifosize / 2;
- do {
- serial_out(up, UART_TX, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- up->port.icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- } while (--count > 0);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&up->port);
-
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
- if (uart_circ_empty(xmit))
- serial_pxa_stop_tx(&up->port);
+ serial_out(up, UART_TX, ch);
}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(transmit_chars, port, ch,
+ true,
+ serial_pxa_put_char(port, ch),
+ ({}));
+
static void serial_pxa_start_tx(struct uart_port *port)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
@@ -254,7 +233,7 @@ static inline irqreturn_t serial_pxa_irq(int irq, void *dev_id)
receive_chars(up, &lsr);
check_modem_status(up);
if (lsr & UART_LSR_THRE)
- transmit_chars(up);
+ transmit_chars(&up->port, up->port.fifosize / 2);
spin_unlock(&up->port.lock);
return IRQ_HANDLED;
}
diff --git a/drivers/tty/serial/rp2.c b/drivers/tty/serial/rp2.c
index 6689d8add8f7..8719022b189d 100644
--- a/drivers/tty/serial/rp2.c
+++ b/drivers/tty/serial/rp2.c
@@ -426,35 +426,10 @@ static void rp2_rx_chars(struct rp2_uart_port *up)
tty_flip_buffer_push(port);
}
-static void rp2_tx_chars(struct rp2_uart_port *up)
-{
- u16 max_tx = FIFO_SIZE - readw(up->base + RP2_TX_FIFO_COUNT);
- struct circ_buf *xmit = &up->port.state->xmit;
-
- if (uart_tx_stopped(&up->port)) {
- rp2_uart_stop_tx(&up->port);
- return;
- }
-
- for (; max_tx != 0; max_tx--) {
- if (up->port.x_char) {
- writeb(up->port.x_char, up->base + RP2_DATA_BYTE);
- up->port.x_char = 0;
- up->port.icount.tx++;
- continue;
- }
- if (uart_circ_empty(xmit)) {
- rp2_uart_stop_tx(&up->port);
- break;
- }
- writeb(xmit->buf[xmit->tail], up->base + RP2_DATA_BYTE);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- up->port.icount.tx++;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&up->port);
-}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(rp2_tx_chars, port, ch,
+ true,
+ writeb(ch, port_to_up(port)->base + RP2_DATA_BYTE),
+ ({}));
static void rp2_ch_interrupt(struct rp2_uart_port *up)
{
@@ -472,7 +447,8 @@ static void rp2_ch_interrupt(struct rp2_uart_port *up)
if (status & RP2_CHAN_STAT_RXDATA_m)
rp2_rx_chars(up);
if (status & RP2_CHAN_STAT_TXEMPTY_m)
- rp2_tx_chars(up);
+ rp2_tx_chars(&up->port,
+ FIFO_SIZE - readw(up->base + RP2_TX_FIFO_COUNT));
if (status & RP2_CHAN_STAT_MS_CHANGED_MASK)
wake_up_interruptible(&up->port.state->port.delta_msr_wait);
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index 228e380db080..855ad3b457f7 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -319,37 +319,10 @@ receive_chars(struct uart_port *up, unsigned int *status)
*status = disr;
}
-static inline void transmit_chars(struct uart_port *up)
-{
- struct circ_buf *xmit = &up->state->xmit;
- int count;
-
- if (up->x_char) {
- sio_out(up, TXX9_SITFIFO, up->x_char);
- up->icount.tx++;
- up->x_char = 0;
- return;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(up)) {
- serial_txx9_stop_tx(up);
- return;
- }
-
- count = TXX9_SIO_TX_FIFO;
- do {
- sio_out(up, TXX9_SITFIFO, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- up->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- } while (--count > 0);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(up);
-
- if (uart_circ_empty(xmit))
- serial_txx9_stop_tx(up);
-}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(transmit_chars, port, ch,
+ true,
+ sio_out(port, TXX9_SITFIFO, ch),
+ ({}));
static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id)
{
@@ -371,7 +344,7 @@ static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id)
if (status & TXX9_SIDISR_RDIS)
receive_chars(up, &status);
if (status & TXX9_SIDISR_TDIS)
- transmit_chars(up);
+ transmit_chars(up, TXX9_SIO_TX_FIFO);
/* Clear TX/RX Int. Status */
sio_mask(up, TXX9_SIDISR,
TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS |
diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c
index 5c3a07546a58..78180f936bf3 100644
--- a/drivers/tty/serial/sifive.c
+++ b/drivers/tty/serial/sifive.c
@@ -277,45 +277,10 @@ static void __ssp_transmit_char(struct sifive_serial_port *ssp, int ch)
__ssp_writel(ch, SIFIVE_SERIAL_TXDATA_OFFS, ssp);
}
-/**
- * __ssp_transmit_chars() - enqueue multiple bytes onto the TX FIFO
- * @ssp: pointer to a struct sifive_serial_port
- *
- * Transfer up to a TX FIFO size's worth of characters from the Linux serial
- * transmit buffer to the SiFive UART TX FIFO.
- *
- * Context: Any context. Expects @ssp->port.lock to be held by caller.
- */
-static void __ssp_transmit_chars(struct sifive_serial_port *ssp)
-{
- struct circ_buf *xmit = &ssp->port.state->xmit;
- int count;
-
- if (ssp->port.x_char) {
- __ssp_transmit_char(ssp, ssp->port.x_char);
- ssp->port.icount.tx++;
- ssp->port.x_char = 0;
- return;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(&ssp->port)) {
- sifive_serial_stop_tx(&ssp->port);
- return;
- }
- count = SIFIVE_TX_FIFO_DEPTH;
- do {
- __ssp_transmit_char(ssp, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- ssp->port.icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- } while (--count > 0);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&ssp->port);
-
- if (uart_circ_empty(xmit))
- sifive_serial_stop_tx(&ssp->port);
-}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(__ssp_transmit_chars, port, ch,
+ true,
+ __ssp_transmit_char(port_to_sifive_serial_port(port), ch),
+ ({}));
/**
* __ssp_enable_txwm() - enable transmit watermark interrupts
@@ -553,7 +518,7 @@ static irqreturn_t sifive_serial_irq(int irq, void *dev_id)
if (ip & SIFIVE_SERIAL_IP_RXWM_MASK)
__ssp_receive_chars(ssp);
if (ip & SIFIVE_SERIAL_IP_TXWM_MASK)
- __ssp_transmit_chars(ssp);
+ __ssp_transmit_chars(&ssp->port, SIFIVE_TX_FIFO_DEPTH);
spin_unlock(&ssp->port.lock);
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index 4329b9c9cbf0..e217b7ab69af 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -624,38 +624,10 @@ static inline void sprd_rx(struct uart_port *port)
tty_flip_buffer_push(tty);
}
-static inline void sprd_tx(struct uart_port *port)
-{
- struct circ_buf *xmit = &port->state->xmit;
- int count;
-
- if (port->x_char) {
- serial_out(port, SPRD_TXD, port->x_char);
- port->icount.tx++;
- port->x_char = 0;
- return;
- }
-
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- sprd_stop_tx(port);
- return;
- }
-
- count = THLD_TX_EMPTY;
- do {
- serial_out(port, SPRD_TXD, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- } while (--count > 0);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- sprd_stop_tx(port);
-}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(sprd_tx, port, ch,
+ true,
+ serial_out(port, SPRD_TXD, ch),
+ ({}));
/* this handles the interrupt from one port */
static irqreturn_t sprd_handle_irq(int irq, void *dev_id)
@@ -683,7 +655,7 @@ static irqreturn_t sprd_handle_irq(int irq, void *dev_id)
sprd_rx(port);
if (ims & SPRD_IMSR_TX_FIFO_EMPTY)
- sprd_tx(port);
+ sprd_tx(port, THLD_TX_EMPTY);
spin_unlock(&port->lock);
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index cce42f4c9bc2..f5dd3fa4bf26 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -230,6 +230,11 @@ static inline unsigned asc_hw_txroom(struct uart_port *port)
return 0;
}
+static DEFINE_UART_PORT_TX_HELPER_LIMITED(asc_do_transmit_chars, port, ch,
+ true,
+ asc_out(port, ASC_TXBUF, ch),
+ ({}));
+
/*
* Start transmitting chars.
* This is called from both interrupt and task level.
@@ -237,50 +242,7 @@ static inline unsigned asc_hw_txroom(struct uart_port *port)
*/
static void asc_transmit_chars(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
- int txroom;
- unsigned char c;
-
- txroom = asc_hw_txroom(port);
-
- if ((txroom != 0) && port->x_char) {
- c = port->x_char;
- port->x_char = 0;
- asc_out(port, ASC_TXBUF, c);
- port->icount.tx++;
- txroom = asc_hw_txroom(port);
- }
-
- if (uart_tx_stopped(port)) {
- /*
- * We should try and stop the hardware here, but I
- * don't think the ASC has any way to do that.
- */
- asc_disable_tx_interrupts(port);
- return;
- }
-
- if (uart_circ_empty(xmit)) {
- asc_disable_tx_interrupts(port);
- return;
- }
-
- if (txroom == 0)
- return;
-
- do {
- c = xmit->buf[xmit->tail];
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- asc_out(port, ASC_TXBUF, c);
- port->icount.tx++;
- txroom--;
- } while ((txroom > 0) && (!uart_circ_empty(xmit)));
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- asc_disable_tx_interrupts(port);
+ asc_do_transmit_chars(port, asc_hw_txroom(port));
}
static void asc_receive_chars(struct uart_port *port)
--
2.37.2
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 29+ messages in thread
* Re: [PATCH v2 1/3] tty: serial: introduce transmit helper generators
2022-09-01 11:06 ` [PATCH v2 1/3] tty: serial: introduce transmit helper generators Jiri Slaby
@ 2022-09-01 12:25 ` Greg KH
2022-09-02 5:16 ` Jiri Slaby
2022-09-02 10:22 ` Ilpo Järvinen
1 sibling, 1 reply; 29+ messages in thread
From: Greg KH @ 2022-09-01 12:25 UTC (permalink / raw)
To: Jiri Slaby; +Cc: Ilpo Järvinen, linux-serial, linux-kernel
On Thu, Sep 01, 2022 at 01:06:55PM +0200, Jiri Slaby wrote:
> Many serial drivers do the same thing:
> * send x_char if set
> * keep sending from the xmit circular buffer until either
> - the loop reaches the end of the xmit buffer
> - TX is stopped
> - HW fifo is full
> * check for pending characters and:
> - wake up tty writers to fill for more data into xmit buffer
> - stop TX if there is nothing in the xmit buffer
>
> The only differences are:
> * how to write the character to the HW fifo
> * the check of the end condition:
> - is the HW fifo full?
> - is limit of the written characters reached?
>
> So unify the above into two helper generators:
> * DEFINE_UART_PORT_TX_HELPER_LIMITED() -- it performs the above taking
> the written characters limit into account, and
> * DEFINE_UART_PORT_TX_HELPER() -- the same as above, except it only
> checks the HW readiness, not the characters limit.
>
> The HW specific operations (as stated as "differences" above) are passed
> as arguments to the macros. They are:
> * tx_ready() -- returns true if HW can accept more data.
> * put_char() -- write a character to the device.
> * tx_done() -- when the write loop is done, perform arbitrary action
> before potential invocation of ops->stop_tx() happens.
>
> Note that the above macros are generators. This means the code is
> generated in place and the above 3 arguments are "inlined". I.e. no
> added penalty by generating call instructions for every single
> character. Nor any indirect calls. (As in previous versions of this
> patchset.)
>
> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
> ---
>
> Notes:
> [v2] instead of a function (uart_port_tx_limit()) in serial_core,
> generate these in-place using macros. Thus eliminating "call"
> penalty.
Much nicer, but:
> +#define __DEFINE_UART_PORT_TX_HELPER(name, port, ch, tx_ready, put_char, \
> + tx_done, for_test, for_post, ...) \
Do you really need "port" and "ch" as part of this macro? You always
set that to the same thing in your patches, so is it really needed?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 1/3] tty: serial: introduce transmit helper generators
2022-09-01 12:25 ` Greg KH
@ 2022-09-02 5:16 ` Jiri Slaby
2022-09-02 5:23 ` Greg KH
0 siblings, 1 reply; 29+ messages in thread
From: Jiri Slaby @ 2022-09-02 5:16 UTC (permalink / raw)
To: Greg KH; +Cc: Ilpo Järvinen, linux-serial, linux-kernel
On 01. 09. 22, 14:25, Greg KH wrote:
> Much nicer, but:
>
>> +#define __DEFINE_UART_PORT_TX_HELPER(name, port, ch, tx_ready, put_char, \
>> + tx_done, for_test, for_post, ...) \
>
> Do you really need "port" and "ch" as part of this macro? You always
> set that to the same thing in your patches, so is it really needed?
Not really, just to make obvious that those are the names that can be
used in tx_ready, put_char... I can remove it, if you prefer, of course.
thanks,
--
js
suse labs
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 1/3] tty: serial: introduce transmit helper generators
2022-09-02 5:16 ` Jiri Slaby
@ 2022-09-02 5:23 ` Greg KH
2022-09-02 8:02 ` Jiri Slaby
0 siblings, 1 reply; 29+ messages in thread
From: Greg KH @ 2022-09-02 5:23 UTC (permalink / raw)
To: Jiri Slaby; +Cc: Ilpo Järvinen, linux-serial, linux-kernel
On Fri, Sep 02, 2022 at 07:16:58AM +0200, Jiri Slaby wrote:
> On 01. 09. 22, 14:25, Greg KH wrote:
> > Much nicer, but:
> >
> > > +#define __DEFINE_UART_PORT_TX_HELPER(name, port, ch, tx_ready, put_char, \
> > > + tx_done, for_test, for_post, ...) \
> >
> > Do you really need "port" and "ch" as part of this macro? You always
> > set that to the same thing in your patches, so is it really needed?
>
> Not really, just to make obvious that those are the names that can be used
> in tx_ready, put_char... I can remove it, if you prefer, of course.
I'd recommend just removing it as it's a hard macro to read as-is. That
would make it a bit more simple as then you are just passing in the name
and the callback functions, which makes a bit more sense to me.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 1/3] tty: serial: introduce transmit helper generators
2022-09-02 5:23 ` Greg KH
@ 2022-09-02 8:02 ` Jiri Slaby
0 siblings, 0 replies; 29+ messages in thread
From: Jiri Slaby @ 2022-09-02 8:02 UTC (permalink / raw)
To: Greg KH; +Cc: Ilpo Järvinen, linux-serial, linux-kernel
On 02. 09. 22, 7:23, Greg KH wrote:
> On Fri, Sep 02, 2022 at 07:16:58AM +0200, Jiri Slaby wrote:
>> On 01. 09. 22, 14:25, Greg KH wrote:
>>> Much nicer, but:
>>>
>>>> +#define __DEFINE_UART_PORT_TX_HELPER(name, port, ch, tx_ready, put_char, \
>>>> + tx_done, for_test, for_post, ...) \
>>>
>>> Do you really need "port" and "ch" as part of this macro? You always
>>> set that to the same thing in your patches, so is it really needed?
>>
>> Not really, just to make obvious that those are the names that can be used
>> in tx_ready, put_char... I can remove it, if you prefer, of course.
>
> I'd recommend just removing it as it's a hard macro to read as-is. That
> would make it a bit more simple as then you are just passing in the name
> and the callback functions, which makes a bit more sense to me.
OK, I'll wait a couple of days if more comments/acks/reviews come and
will send a v3.
thanks,
--
js
suse labs
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 1/3] tty: serial: introduce transmit helper generators
2022-09-01 11:06 ` [PATCH v2 1/3] tty: serial: introduce transmit helper generators Jiri Slaby
2022-09-01 12:25 ` Greg KH
@ 2022-09-02 10:22 ` Ilpo Järvinen
2022-09-02 10:24 ` Jiri Slaby
1 sibling, 1 reply; 29+ messages in thread
From: Ilpo Järvinen @ 2022-09-02 10:22 UTC (permalink / raw)
To: Jiri Slaby; +Cc: Greg Kroah-Hartman, linux-serial, LKML
On Thu, 1 Sep 2022, Jiri Slaby wrote:
> Many serial drivers do the same thing:
> * send x_char if set
> * keep sending from the xmit circular buffer until either
> - the loop reaches the end of the xmit buffer
> - TX is stopped
> - HW fifo is full
> * check for pending characters and:
> - wake up tty writers to fill for more data into xmit buffer
> - stop TX if there is nothing in the xmit buffer
>
> The only differences are:
> * how to write the character to the HW fifo
> * the check of the end condition:
> - is the HW fifo full?
> - is limit of the written characters reached?
>
> So unify the above into two helper generators:
> * DEFINE_UART_PORT_TX_HELPER_LIMITED() -- it performs the above taking
> the written characters limit into account, and
> * DEFINE_UART_PORT_TX_HELPER() -- the same as above, except it only
> checks the HW readiness, not the characters limit.
>
> The HW specific operations (as stated as "differences" above) are passed
> as arguments to the macros. They are:
> * tx_ready() -- returns true if HW can accept more data.
> * put_char() -- write a character to the device.
> * tx_done() -- when the write loop is done, perform arbitrary action
> before potential invocation of ops->stop_tx() happens.
>
> Note that the above macros are generators. This means the code is
> generated in place and the above 3 arguments are "inlined". I.e. no
> added penalty by generating call instructions for every single
> character. Nor any indirect calls. (As in previous versions of this
> patchset.)
>
> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
> ---
>
> Notes:
> [v2] instead of a function (uart_port_tx_limit()) in serial_core,
> generate these in-place using macros. Thus eliminating "call"
> penalty.
>
> Documentation/driver-api/serial/driver.rst | 3 +
> include/linux/serial_core.h | 86 ++++++++++++++++++++++
> 2 files changed, 89 insertions(+)
>
> diff --git a/Documentation/driver-api/serial/driver.rst b/Documentation/driver-api/serial/driver.rst
> index 23c6b956cd90..25775bf1fcc6 100644
> --- a/Documentation/driver-api/serial/driver.rst
> +++ b/Documentation/driver-api/serial/driver.rst
> @@ -78,6 +78,9 @@ Other functions
> uart_get_lsr_info uart_handle_dcd_change uart_handle_cts_change
> uart_try_toggle_sysrq uart_get_console
>
> +.. kernel-doc:: include/linux/serial_core.h
> + :identifiers: DEFINE_UART_PORT_TX_HELPER_LIMITED DEFINE_UART_PORT_TX_HELPER
> +
> Other notes
> -----------
>
> diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
> index 6e4f4765d209..715778160ae1 100644
> --- a/include/linux/serial_core.h
> +++ b/include/linux/serial_core.h
> @@ -646,6 +646,92 @@ struct uart_driver {
>
> void uart_write_wakeup(struct uart_port *port);
>
> +#define __DEFINE_UART_PORT_TX_HELPER(name, port, ch, tx_ready, put_char, \
> + tx_done, for_test, for_post, ...) \
> +unsigned int name(struct uart_port *port __VA_OPT__(,) __VA_ARGS__) \
> +{ \
> + struct circ_buf *xmit = &port->state->xmit; \
> + unsigned int pending; \
> + u8 ch; \
> + \
> + for (; (for_test) && (tx_ready); (for_post), port->icount.tx++) { \
> + * The functions in parameters shall be designed as follows:
> + * * **tx_ready(port):** the function shall return true if the HW can accept
> + * more data to be sent. This function can be %NULL, which means the HW is
> + * always ready.
So if tx_ready can be NULL, how does that for() loop above work??
--
i.
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 1/3] tty: serial: introduce transmit helper generators
2022-09-02 10:22 ` Ilpo Järvinen
@ 2022-09-02 10:24 ` Jiri Slaby
0 siblings, 0 replies; 29+ messages in thread
From: Jiri Slaby @ 2022-09-02 10:24 UTC (permalink / raw)
To: Ilpo Järvinen; +Cc: Greg Kroah-Hartman, linux-serial, LKML
On 02. 09. 22, 12:22, Ilpo Järvinen wrote:
> On Thu, 1 Sep 2022, Jiri Slaby wrote:
>
>> Many serial drivers do the same thing:
>> * send x_char if set
>> * keep sending from the xmit circular buffer until either
>> - the loop reaches the end of the xmit buffer
>> - TX is stopped
>> - HW fifo is full
>> * check for pending characters and:
>> - wake up tty writers to fill for more data into xmit buffer
>> - stop TX if there is nothing in the xmit buffer
>>
>> The only differences are:
>> * how to write the character to the HW fifo
>> * the check of the end condition:
>> - is the HW fifo full?
>> - is limit of the written characters reached?
>>
>> So unify the above into two helper generators:
>> * DEFINE_UART_PORT_TX_HELPER_LIMITED() -- it performs the above taking
>> the written characters limit into account, and
>> * DEFINE_UART_PORT_TX_HELPER() -- the same as above, except it only
>> checks the HW readiness, not the characters limit.
>>
>> The HW specific operations (as stated as "differences" above) are passed
>> as arguments to the macros. They are:
>> * tx_ready() -- returns true if HW can accept more data.
>> * put_char() -- write a character to the device.
>> * tx_done() -- when the write loop is done, perform arbitrary action
>> before potential invocation of ops->stop_tx() happens.
>>
>> Note that the above macros are generators. This means the code is
>> generated in place and the above 3 arguments are "inlined". I.e. no
>> added penalty by generating call instructions for every single
>> character. Nor any indirect calls. (As in previous versions of this
>> patchset.)
>>
>> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
>> ---
>>
>> Notes:
>> [v2] instead of a function (uart_port_tx_limit()) in serial_core,
>> generate these in-place using macros. Thus eliminating "call"
>> penalty.
>>
>> Documentation/driver-api/serial/driver.rst | 3 +
>> include/linux/serial_core.h | 86 ++++++++++++++++++++++
>> 2 files changed, 89 insertions(+)
>>
>> diff --git a/Documentation/driver-api/serial/driver.rst b/Documentation/driver-api/serial/driver.rst
>> index 23c6b956cd90..25775bf1fcc6 100644
>> --- a/Documentation/driver-api/serial/driver.rst
>> +++ b/Documentation/driver-api/serial/driver.rst
>> @@ -78,6 +78,9 @@ Other functions
>> uart_get_lsr_info uart_handle_dcd_change uart_handle_cts_change
>> uart_try_toggle_sysrq uart_get_console
>>
>> +.. kernel-doc:: include/linux/serial_core.h
>> + :identifiers: DEFINE_UART_PORT_TX_HELPER_LIMITED DEFINE_UART_PORT_TX_HELPER
>> +
>> Other notes
>> -----------
>>
>> diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
>> index 6e4f4765d209..715778160ae1 100644
>> --- a/include/linux/serial_core.h
>> +++ b/include/linux/serial_core.h
>> @@ -646,6 +646,92 @@ struct uart_driver {
>>
>> void uart_write_wakeup(struct uart_port *port);
>>
>> +#define __DEFINE_UART_PORT_TX_HELPER(name, port, ch, tx_ready, put_char, \
>> + tx_done, for_test, for_post, ...) \
>> +unsigned int name(struct uart_port *port __VA_OPT__(,) __VA_ARGS__) \
>> +{ \
>> + struct circ_buf *xmit = &port->state->xmit; \
>> + unsigned int pending; \
>> + u8 ch; \
>> + \
>> + for (; (for_test) && (tx_ready); (for_post), port->icount.tx++) { \
>
>> + * The functions in parameters shall be designed as follows:
>> + * * **tx_ready(port):** the function shall return true if the HW can accept
>> + * more data to be sent. This function can be %NULL, which means the HW is
>> + * always ready.
>
> So if tx_ready can be NULL, how does that for() loop above work??
Sorry, the docs is wrong (corresponded to v1). I fixed it locally already:
https://git.kernel.org/pub/scm/linux/kernel/git/jirislaby/linux.git/commit/?h=devel&id=989c488c69faf2987648e09358c79d75b4a3b5c7
thanks,
--
js
suse labs
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 2/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER()
2022-09-01 11:06 ` [PATCH v2 2/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER() Jiri Slaby
@ 2022-09-02 14:21 ` Ilpo Järvinen
2022-09-06 10:50 ` Jiri Slaby
0 siblings, 1 reply; 29+ messages in thread
From: Ilpo Järvinen @ 2022-09-02 14:21 UTC (permalink / raw)
To: Jiri Slaby
Cc: Greg Kroah-Hartman, linux-serial, LKML, Tobias Klauser,
Richard Genoud, Nicolas Ferre, Alexandre Belloni, Claudiu Beznea,
Vladimir Zapolskiy, Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi,
Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, Andreas Färber, Manivannan Sadhasivam
[-- Attachment #1: Type: text/plain, Size: 4882 bytes --]
On Thu, 1 Sep 2022, Jiri Slaby wrote:
> DEFINE_UART_PORT_TX_HELPER() is a new helper to send characters to the
> device. Use it in these drivers.
>
> Cc: Tobias Klauser <tklauser@distanz.ch>
> Cc: Richard Genoud <richard.genoud@gmail.com>
> Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
> Cc: Vladimir Zapolskiy <vz@mleia.com>
> Cc: Liviu Dudau <liviu.dudau@arm.com>
> Cc: Sudeep Holla <sudeep.holla@arm.com>
> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Cc: "Andreas Färber" <afaerber@suse.de>
> Cc: Manivannan Sadhasivam <mani@kernel.org>
> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
> ---
> diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
> index 3f1986c89694..944686a0d00d 100644
> --- a/drivers/tty/serial/mpc52xx_uart.c
> +++ b/drivers/tty/serial/mpc52xx_uart.c
> @@ -1338,7 +1338,6 @@ mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser)
> return 0;
> }
>
> -
> static const struct uart_ops mpc52xx_uart_ops = {
> .tx_empty = mpc52xx_uart_tx_empty,
> .set_mctrl = mpc52xx_uart_set_mctrl,
Stray change.
> diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
> index e64e42a19d1a..738f4b20cb8e 100644
> --- a/drivers/tty/serial/sa1100.c
> +++ b/drivers/tty/serial/sa1100.c
> @@ -226,45 +226,34 @@ sa1100_rx_chars(struct sa1100_port *sport)
> tty_flip_buffer_push(&sport->port.state->port);
> }
>
> -static void sa1100_tx_chars(struct sa1100_port *sport)
> +static bool sa1100_tx_ready(struct uart_port *port)
> {
> - struct circ_buf *xmit = &sport->port.state->xmit;
> + struct sa1100_port *sport =
> + container_of(port, struct sa1100_port, port);
>
> - if (sport->port.x_char) {
> - UART_PUT_CHAR(sport, sport->port.x_char);
> - sport->port.icount.tx++;
> - sport->port.x_char = 0;
> - return;
> - }
> + return UART_GET_UTSR1(sport) & UTSR1_TNF;
> +}
> +
> +static void sa1100_put_char(struct uart_port *port, unsigned char ch)
> +{
> + struct sa1100_port *sport =
> + container_of(port, struct sa1100_port, port);
> +
> + UART_PUT_CHAR(sport, ch);
> +}
Perhaps not to add into this change itself, but I just point out these
would be useful in addition to what is changed:
- Get rid of UART_PUT_CHAR()
- sa1100_console_putchar() could use sa1100_tx_ready()
> diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
> index 6f08136ce78a..ff430a1cc3a2 100644
> --- a/drivers/tty/serial/vt8500_serial.c
> +++ b/drivers/tty/serial/vt8500_serial.c
> @@ -187,37 +187,17 @@ static void handle_rx(struct uart_port *port)
> tty_flip_buffer_push(tport);
> }
>
> -static void handle_tx(struct uart_port *port)
> +static unsigned int vt8500_tx_empty(struct uart_port *port)
> {
> - struct circ_buf *xmit = &port->state->xmit;
> -
> - if (port->x_char) {
> - writeb(port->x_char, port->membase + VT8500_TXFIFO);
> - port->icount.tx++;
> - port->x_char = 0;
> - }
> - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
> - vt8500_stop_tx(port);
> - return;
> - }
> + unsigned int idx = vt8500_read(port, VT8500_URFIDX) & 0x1f;
>
> - while ((vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16) {
> - if (uart_circ_empty(xmit))
> - break;
> -
> - writeb(xmit->buf[xmit->tail], port->membase + VT8500_TXFIFO);
> -
> - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
> - port->icount.tx++;
> - }
> -
> - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
> - uart_write_wakeup(port);
> -
> - if (uart_circ_empty(xmit))
> - vt8500_stop_tx(port);
> + return idx < 16 ? TIOCSER_TEMT : 0;
> }
So there's just plain move and re-layouting of existing vt8500_tx_empty()
embedded here. Why not do it in a separate change beforehand?
I discovered this the hard way, that is, I started to look why tx on
earth "FIFO index" < 16 should be called "tx empty", if it would be a
separate change it would have been immediately obvious that it was a
pre-existing thing.
> +static DEFINE_UART_PORT_TX_HELPER(handle_tx, port, ch,
> + vt8500_tx_empty(port),
> + writeb(ch, port->membase + VT8500_TXFIFO));
> +
> static void vt8500_start_tx(struct uart_port *port)
> {
> struct vt8500_port *vt8500_port = container_of(port,
> @@ -260,12 +240,6 @@ static irqreturn_t vt8500_irq(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> -static unsigned int vt8500_tx_empty(struct uart_port *port)
> -{
> - return (vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16 ?
> - TIOCSER_TEMT : 0;
> -}
> -
> static unsigned int vt8500_get_mctrl(struct uart_port *port)
> {
> unsigned int usr;
>
--
i.
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 3/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
2022-09-01 11:06 ` Jiri Slaby
@ 2022-09-02 14:56 ` Ilpo Järvinen
-1 siblings, 0 replies; 29+ messages in thread
From: Ilpo Järvinen @ 2022-09-02 14:56 UTC (permalink / raw)
To: Jiri Slaby
Cc: Greg Kroah-Hartman, linux-serial, LKML, Russell King,
Florian Fainelli, bcm-kernel-feedback-list, Pali Rohár,
Kevin Cernekee, Palmer Dabbelt, Paul Walmsley, Orson Zhai,
Baolin Wang, Chunyan Zhang, Patrice Chotard, linux-riscv
[-- Attachment #1: Type: text/plain, Size: 1043 bytes --]
On Thu, 1 Sep 2022, Jiri Slaby wrote:
> DEFINE_UART_PORT_TX_HELPER_LIMITED() is a new helper to send characters
> to the device. Use it in these drivers.
>
> mux.c also needs to define tx_done(). But I'm not sure if the driver
> really wants to wait for all the characters to dismiss from the HW fifo
> at this code point. Hence I marked this as FIXME.
Indeed, it seems odd.
This change looked good to me but I'll give my rev-by only after seeing
the next version.
--
i.
> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: bcm-kernel-feedback-list@broadcom.com
> Cc: "Pali Rohár" <pali@kernel.org>
> Cc: Kevin Cernekee <cernekee@gmail.com>
> Cc: Palmer Dabbelt <palmer@dabbelt.com>
> Cc: Paul Walmsley <paul.walmsley@sifive.com>
> Cc: Orson Zhai <orsonzhai@gmail.com>
> Cc: Baolin Wang <baolin.wang7@gmail.com>
> Cc: Chunyan Zhang <zhang.lyra@gmail.com>
> Cc: Patrice Chotard <patrice.chotard@foss.st.com>
> Cc: linux-riscv@lists.infradead.org
[-- Attachment #2: Type: text/plain, Size: 161 bytes --]
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 3/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
@ 2022-09-02 14:56 ` Ilpo Järvinen
0 siblings, 0 replies; 29+ messages in thread
From: Ilpo Järvinen @ 2022-09-02 14:56 UTC (permalink / raw)
To: Jiri Slaby
Cc: Greg Kroah-Hartman, linux-serial, LKML, Russell King,
Florian Fainelli, bcm-kernel-feedback-list, Pali Rohár,
Kevin Cernekee, Palmer Dabbelt, Paul Walmsley, Orson Zhai,
Baolin Wang, Chunyan Zhang, Patrice Chotard, linux-riscv
[-- Attachment #1: Type: text/plain, Size: 1043 bytes --]
On Thu, 1 Sep 2022, Jiri Slaby wrote:
> DEFINE_UART_PORT_TX_HELPER_LIMITED() is a new helper to send characters
> to the device. Use it in these drivers.
>
> mux.c also needs to define tx_done(). But I'm not sure if the driver
> really wants to wait for all the characters to dismiss from the HW fifo
> at this code point. Hence I marked this as FIXME.
Indeed, it seems odd.
This change looked good to me but I'll give my rev-by only after seeing
the next version.
--
i.
> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: bcm-kernel-feedback-list@broadcom.com
> Cc: "Pali Rohár" <pali@kernel.org>
> Cc: Kevin Cernekee <cernekee@gmail.com>
> Cc: Palmer Dabbelt <palmer@dabbelt.com>
> Cc: Paul Walmsley <paul.walmsley@sifive.com>
> Cc: Orson Zhai <orsonzhai@gmail.com>
> Cc: Baolin Wang <baolin.wang7@gmail.com>
> Cc: Chunyan Zhang <zhang.lyra@gmail.com>
> Cc: Patrice Chotard <patrice.chotard@foss.st.com>
> Cc: linux-riscv@lists.infradead.org
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 2/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER()
2022-09-02 14:21 ` Ilpo Järvinen
@ 2022-09-06 10:50 ` Jiri Slaby
0 siblings, 0 replies; 29+ messages in thread
From: Jiri Slaby @ 2022-09-06 10:50 UTC (permalink / raw)
To: Ilpo Järvinen
Cc: Greg Kroah-Hartman, linux-serial, LKML, Tobias Klauser,
Richard Genoud, Nicolas Ferre, Alexandre Belloni, Claudiu Beznea,
Vladimir Zapolskiy, Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi,
Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, Andreas Färber, Manivannan Sadhasivam
On 02. 09. 22, 16:21, Ilpo Järvinen wrote:
>> --- a/drivers/tty/serial/sa1100.c
>> +++ b/drivers/tty/serial/sa1100.c
>> @@ -226,45 +226,34 @@ sa1100_rx_chars(struct sa1100_port *sport)
>> tty_flip_buffer_push(&sport->port.state->port);
>> }
>>
>> -static void sa1100_tx_chars(struct sa1100_port *sport)
>> +static bool sa1100_tx_ready(struct uart_port *port)
>> {
>> - struct circ_buf *xmit = &sport->port.state->xmit;
>> + struct sa1100_port *sport =
>> + container_of(port, struct sa1100_port, port);
>>
>> - if (sport->port.x_char) {
>> - UART_PUT_CHAR(sport, sport->port.x_char);
>> - sport->port.icount.tx++;
>> - sport->port.x_char = 0;
>> - return;
>> - }
>> + return UART_GET_UTSR1(sport) & UTSR1_TNF;
>> +}
>> +
>> +static void sa1100_put_char(struct uart_port *port, unsigned char ch)
>> +{
>> + struct sa1100_port *sport =
>> + container_of(port, struct sa1100_port, port);
>> +
>> + UART_PUT_CHAR(sport, ch);
>> +}
>
> Perhaps not to add into this change itself, but I just point out these
> would be useful in addition to what is changed:
> - Get rid of UART_PUT_CHAR()
Right, that would make the above easier.
> - sa1100_console_putchar() could use sa1100_tx_ready()
That could be a nice cleanup. But looking at the history, I am not sure
anyone cares enough about the driver (and cleaning it up :P). And I'm
not much into it.
I've just sent v3 including your comments addressed.
thanks,
--
js
suse labs
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 3/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
@ 2022-09-04 13:51 kernel test robot
0 siblings, 0 replies; 29+ messages in thread
From: kernel test robot @ 2022-09-04 13:51 UTC (permalink / raw)
To: kbuild
[-- Attachment #1: Type: text/plain, Size: 7411 bytes --]
::::::
:::::: Manual check reason: "low confidence static check warning: drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'void' as identifier"
::::::
BCC: lkp(a)intel.com
CC: kbuild-all(a)lists.01.org
In-Reply-To: <20220901110657.3305-4-jslaby@suse.cz>
References: <20220901110657.3305-4-jslaby@suse.cz>
TO: Jiri Slaby <jslaby@suse.cz>
Hi Jiri,
I love your patch! Perhaps something to improve:
[auto build test WARNING on tty/tty-testing]
[also build test WARNING on usb/usb-testing shawnguo/for-next linus/master v6.0-rc3 next-20220901]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Jiri-Slaby/tty-TX-helpers/20220901-190806
base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-testing
:::::: branch date: 3 days ago
:::::: commit date: 3 days ago
config: m68k-randconfig-s031-20220904 (https://download.01.org/0day-ci/archive/20220904/202209042113.mXCVGqoa-lkp(a)intel.com/config)
compiler: m68k-linux-gcc (GCC) 12.1.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-39-gce1a6720-dirty
# https://github.com/intel-lab-lkp/linux/commit/f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Jiri-Slaby/tty-TX-helpers/20220901-190806
git checkout f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=m68k SHELL=/bin/bash drivers/tty/serial/
If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ;
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got &&
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got --
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got (
>> drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'void' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got (
>> drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'void' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got <
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ==
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: note: previously declared as:
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: note: previously declared as:
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: unsigned int [addressable] [toplevel] pending
drivers/tty/serial/altera_jtaguart.c:150:36: sparse: sparse: too many arguments for function altera_jtaguart_do_tx_chars
vim +/void +137 drivers/tty/serial/altera_jtaguart.c
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 136
f6f99189d77ea4 drivers/tty/serial/altera_jtaguart.c Jiri Slaby 2022-09-01 @137 static DEFINE_UART_PORT_TX_HELPER_LIMITED(altera_jtaguart_do_tx_chars, port, ch,
f6f99189d77ea4 drivers/tty/serial/altera_jtaguart.c Jiri Slaby 2022-09-01 138 true,
f6f99189d77ea4 drivers/tty/serial/altera_jtaguart.c Jiri Slaby 2022-09-01 139 writel(ch, port->membase + ALTERA_JTAGUART_DATA_REG),
f6f99189d77ea4 drivers/tty/serial/altera_jtaguart.c Jiri Slaby 2022-09-01 140 ({}));
f6f99189d77ea4 drivers/tty/serial/altera_jtaguart.c Jiri Slaby 2022-09-01 141
--
0-DAY CI Kernel Test Service
https://01.org/lkp
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 3/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
@ 2022-09-03 2:47 kernel test robot
0 siblings, 0 replies; 29+ messages in thread
From: kernel test robot @ 2022-09-03 2:47 UTC (permalink / raw)
To: kbuild
[-- Attachment #1: Type: text/plain, Size: 34218 bytes --]
::::::
:::::: Manual check reason: "low confidence static check first_new_problem: arch/sparc/include/asm/io_64.h:177:20: sparse: void static inline [gnu_inline] [toplevel] writel( ... )"
::::::
BCC: lkp(a)intel.com
CC: kbuild-all(a)lists.01.org
In-Reply-To: <20220901110657.3305-4-jslaby@suse.cz>
References: <20220901110657.3305-4-jslaby@suse.cz>
TO: Jiri Slaby <jslaby@suse.cz>
Hi Jiri,
I love your patch! Perhaps something to improve:
[auto build test WARNING on tty/tty-testing]
[also build test WARNING on usb/usb-testing shawnguo/for-next linus/master v6.0-rc3 next-20220901]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Jiri-Slaby/tty-TX-helpers/20220901-190806
base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-testing
:::::: branch date: 2 days ago
:::::: commit date: 2 days ago
config: sparc64-randconfig-s041-20220901
compiler: sparc64-linux-gcc (GCC) 12.1.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-39-gce1a6720-dirty
# https://github.com/intel-lab-lkp/linux/commit/f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Jiri-Slaby/tty-TX-helpers/20220901-190806
git checkout f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=sparc64 SHELL=/bin/bash drivers/tty/serial/
If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ;
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got &&
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got --
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ->
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ->
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got }
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ->
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ->
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got }
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got <
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ==
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got }
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ;@the end of type declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got }
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: symbol 'writel' redeclared with different type (incompatible argument 1 (different base types)):
drivers/tty/serial/amba-pl010.c:165:8: sparse: int static [signed] [toplevel] writel( ... )
drivers/tty/serial/amba-pl010.c: note: in included file (through arch/sparc/include/asm/io.h, include/linux/scatterlist.h, include/linux/kfifo.h, ...):
arch/sparc/include/asm/io_64.h:177:20: sparse: note: previously declared as:
>> arch/sparc/include/asm/io_64.h:177:20: sparse: void static inline [gnu_inline] [toplevel] writel( ... )
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
drivers/tty/serial/amba-pl010.c:165:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/amba-pl010.c:165:8: sparse: note: previously declared as:
drivers/tty/serial/amba-pl010.c:165:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: symbol 'writel' redeclared with different type (incompatible argument 1 (different base types)):
drivers/tty/serial/amba-pl010.c:165:8: sparse: int static [signed] [toplevel] writel( ... )
arch/sparc/include/asm/io_64.h:177:20: sparse: note: previously declared as:
>> arch/sparc/include/asm/io_64.h:177:20: sparse: void static inline [gnu_inline] [toplevel] writel( ... )
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
drivers/tty/serial/amba-pl010.c:165:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/amba-pl010.c:165:8: sparse: note: previously declared as:
drivers/tty/serial/amba-pl010.c:165:8: sparse: unsigned int [addressable] [toplevel] pending
drivers/tty/serial/amba-pl010.c:214:47: sparse: sparse: too many arguments for function pl010_tx_chars
--
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got ;
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got &&
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got --
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got ,
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got ->
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got }
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got ,
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got ->
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got }
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got <
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got ==
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got }
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ;@the end of type declaration
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got }
drivers/tty/serial/apbuart.c:130:28: sparse: sparse: too many arguments for function apbuart_do_tx_chars
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: symbol '__raw_writel' redeclared with different type (incompatible argument 1 (different base types)):
drivers/tty/serial/apbuart.c:123:8: sparse: int static [signed] [toplevel] __raw_writel( ... )
drivers/tty/serial/apbuart.c: note: in included file (through arch/sparc/include/asm/io.h, include/linux/scatterlist.h, include/linux/kfifo.h, ...):
arch/sparc/include/asm/io_64.h:85:20: sparse: note: previously declared as:
>> arch/sparc/include/asm/io_64.h:85:20: sparse: void static inline [gnu_inline] [toplevel] __raw_writel( ... )
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
drivers/tty/serial/apbuart.c:123:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/apbuart.c:123:8: sparse: note: previously declared as:
drivers/tty/serial/apbuart.c:123:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: symbol '__raw_writel' redeclared with different type (incompatible argument 1 (different base types)):
drivers/tty/serial/apbuart.c:123:8: sparse: int static [signed] [toplevel] __raw_writel( ... )
arch/sparc/include/asm/io_64.h:85:20: sparse: note: previously declared as:
>> arch/sparc/include/asm/io_64.h:85:20: sparse: void static inline [gnu_inline] [toplevel] __raw_writel( ... )
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
drivers/tty/serial/apbuart.c:123:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/apbuart.c:123:8: sparse: note: previously declared as:
drivers/tty/serial/apbuart.c:123:8: sparse: unsigned int [addressable] [toplevel] pending
drivers/tty/serial/apbuart.c:185:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/apbuart.c:198:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/apbuart.c:253:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/apbuart.c:254:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/apbuart.c:338:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/apbuart.c:348:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/apbuart.c:351:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/apbuart.c:362:17: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/apbuart.c:368:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/apbuart.c:398:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/apbuart.c:410:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/apbuart.c:421:9: sparse: sparse: too many arguments for function __raw_writel
--
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ;
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got &&
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got --
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got <
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ==
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'writel' redeclared with different type (incompatible argument 1 (different base types)):
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int static [signed] [toplevel] writel( ... )
drivers/tty/serial/altera_jtaguart.c: note: in included file (through arch/sparc/include/asm/io.h, include/linux/scatterlist.h, include/linux/kfifo.h, ...):
arch/sparc/include/asm/io_64.h:177:20: sparse: note: previously declared as:
>> arch/sparc/include/asm/io_64.h:177:20: sparse: void static inline [gnu_inline] [toplevel] writel( ... )
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: note: previously declared as:
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'writel' redeclared with different type (incompatible argument 1 (different base types)):
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int static [signed] [toplevel] writel( ... )
arch/sparc/include/asm/io_64.h:177:20: sparse: note: previously declared as:
>> arch/sparc/include/asm/io_64.h:177:20: sparse: void static inline [gnu_inline] [toplevel] writel( ... )
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: note: previously declared as:
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: unsigned int [addressable] [toplevel] pending
drivers/tty/serial/altera_jtaguart.c:150:36: sparse: sparse: too many arguments for function altera_jtaguart_do_tx_chars
--
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got ;
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got &&
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got --
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got ->
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got ->
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got ->
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got ->
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got <
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got ==
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ;@the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: symbol 'writel' redeclared with different type (incompatible argument 1 (different base types)):
drivers/tty/serial/mvebu-uart.c:336:8: sparse: int static [signed] [toplevel] writel( ... )
drivers/tty/serial/mvebu-uart.c: note: in included file (through arch/sparc/include/asm/io.h, include/linux/io.h):
arch/sparc/include/asm/io_64.h:177:20: sparse: note: previously declared as:
>> arch/sparc/include/asm/io_64.h:177:20: sparse: void static inline [gnu_inline] [toplevel] writel( ... )
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
drivers/tty/serial/mvebu-uart.c:336:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/mvebu-uart.c:336:8: sparse: note: previously declared as:
drivers/tty/serial/mvebu-uart.c:336:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: symbol 'writel' redeclared with different type (incompatible argument 1 (different base types)):
drivers/tty/serial/mvebu-uart.c:336:8: sparse: int static [signed] [toplevel] writel( ... )
arch/sparc/include/asm/io_64.h:177:20: sparse: note: previously declared as:
>> arch/sparc/include/asm/io_64.h:177:20: sparse: void static inline [gnu_inline] [toplevel] writel( ... )
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
drivers/tty/serial/mvebu-uart.c:336:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/mvebu-uart.c:336:8: sparse: note: previously declared as:
drivers/tty/serial/mvebu-uart.c:336:8: sparse: unsigned int [addressable] [toplevel] pending
drivers/tty/serial/mvebu-uart.c:343:31: sparse: sparse: too many arguments for function mvebu_uart_do_tx_chars
vim +177 arch/sparc/include/asm/io_64.h
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 83
add79d686c81af arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 84 #define __raw_writel __raw_writel
add79d686c81af arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 @85 static inline void __raw_writel(u32 l, const volatile void __iomem *addr)
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 86 {
add79d686c81af arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 87 __asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_raw_writel */"
add79d686c81af arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 88 : /* no outputs */
add79d686c81af arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 89 : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 90 }
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 91
add79d686c81af arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 92 #define __raw_writeq __raw_writeq
add79d686c81af arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 93 static inline void __raw_writeq(u64 q, const volatile void __iomem *addr)
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 94 {
add79d686c81af arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 95 __asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_raw_writeq */"
add79d686c81af arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 96 : /* no outputs */
add79d686c81af arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 97 : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 98 }
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 99
add79d686c81af arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 100 /* Memory functions, same as I/O accesses on Ultra.
add79d686c81af arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 101 * Access memory as little endian bypassing
add79d686c81af arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 102 * the cache by using ASI_PHYS_BYPASS_EC_E_L
add79d686c81af arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 103 */
79294d7eff89f6 arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 104 #define readb readb
7c3969c3a4f359 arch/sparc/include/asm/io_64.h Arnd Bergmann 2014-11-19 105 #define readb_relaxed readb
79294d7eff89f6 arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 106 static inline u8 readb(const volatile void __iomem *addr)
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 107 { u8 ret;
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 108
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 109 __asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_readb */"
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 110 : "=r" (ret)
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 111 : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 112 : "memory");
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 113 return ret;
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 114 }
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 115
79294d7eff89f6 arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 116 #define readw readw
7c3969c3a4f359 arch/sparc/include/asm/io_64.h Arnd Bergmann 2014-11-19 117 #define readw_relaxed readw
79294d7eff89f6 arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 118 static inline u16 readw(const volatile void __iomem *addr)
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 119 { u16 ret;
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 120
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 121 __asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_readw */"
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 122 : "=r" (ret)
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 123 : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 124 : "memory");
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 125
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 126 return ret;
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 127 }
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 128
79294d7eff89f6 arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 129 #define readl readl
7c3969c3a4f359 arch/sparc/include/asm/io_64.h Arnd Bergmann 2014-11-19 130 #define readl_relaxed readl
79294d7eff89f6 arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 131 static inline u32 readl(const volatile void __iomem *addr)
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 132 { u32 ret;
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 133
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 134 __asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_readl */"
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 135 : "=r" (ret)
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 136 : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 137 : "memory");
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 138
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 139 return ret;
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 140 }
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 141
79294d7eff89f6 arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 142 #define readq readq
1191ccb34cf810 arch/sparc/include/asm/io_64.h Will Deacon 2013-09-04 143 #define readq_relaxed readq
79294d7eff89f6 arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 144 static inline u64 readq(const volatile void __iomem *addr)
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 145 { u64 ret;
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 146
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 147 __asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_readq */"
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 148 : "=r" (ret)
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 149 : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 150 : "memory");
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 151
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 152 return ret;
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 153 }
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 154
79294d7eff89f6 arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 155 #define writeb writeb
7c3969c3a4f359 arch/sparc/include/asm/io_64.h Arnd Bergmann 2014-11-19 156 #define writeb_relaxed writeb
79294d7eff89f6 arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 157 static inline void writeb(u8 b, volatile void __iomem *addr)
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 158 {
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 159 __asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_writeb */"
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 160 : /* no outputs */
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 161 : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 162 : "memory");
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 163 }
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 164
79294d7eff89f6 arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 165 #define writew writew
7c3969c3a4f359 arch/sparc/include/asm/io_64.h Arnd Bergmann 2014-11-19 166 #define writew_relaxed writew
79294d7eff89f6 arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 167 static inline void writew(u16 w, volatile void __iomem *addr)
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 168 {
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 169 __asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_writew */"
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 170 : /* no outputs */
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 171 : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 172 : "memory");
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 173 }
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 174
79294d7eff89f6 arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 175 #define writel writel
7c3969c3a4f359 arch/sparc/include/asm/io_64.h Arnd Bergmann 2014-11-19 176 #define writel_relaxed writel
79294d7eff89f6 arch/sparc/include/asm/io_64.h Sam Ravnborg 2014-07-20 @177 static inline void writel(u32 l, volatile void __iomem *addr)
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 178 {
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 179 __asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_writel */"
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 180 : /* no outputs */
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 181 : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 182 : "memory");
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 183 }
f5e706ad886b6a include/asm-sparc/io_64.h Sam Ravnborg 2008-07-17 184
--
0-DAY CI Kernel Test Service
https://01.org/lkp
[-- Attachment #2: config.ksh --]
[-- Type: text/plain, Size: 146034 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/sparc64 6.0.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="sparc64-linux-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_CONTEXT_TRACKING=y
#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
CONFIG_CONTEXT_TRACKING_USER=y
CONFIG_CONTEXT_TRACKING_USER_FORCE=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem
CONFIG_HAVE_EBPF_JIT=y
#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# end of BPF subsystem
CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
# CONFIG_FORCE_TASKS_RCU is not set
# CONFIG_FORCE_TASKS_RUDE_RCU is not set
# CONFIG_FORCE_TASKS_TRACE_RCU is not set
# end of RCU Subsystem
# CONFIG_IKCONFIG is not set
CONFIG_IKHEADERS=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
# CONFIG_CGROUPS is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_FHANDLE=y
# CONFIG_POSIX_TIMERS is not set
# CONFIG_PRINTK is not set
# CONFIG_BUG is not set
CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
# CONFIG_MEMBARRIER is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_KCMP=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# end of Kernel Performance Events And Counters
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_64BIT=y
CONFIG_SPARC=y
CONFIG_SPARC64=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_ARCH_ATU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_AUDIT_ARCH=y
CONFIG_MMU=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_ARCH_SUPPORTS_UPROBES=y
#
# Processor type and features
#
# CONFIG_SMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_EARLYFB=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPU frequency scaling drivers
#
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
CONFIG_SPARC_US3_CPUFREQ=y
CONFIG_SPARC_US2E_CPUFREQ=y
CONFIG_QORIQ_CPUFREQ=y
# end of CPU Frequency scaling
CONFIG_US3_MC=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_HIBERNATION is not set
# CONFIG_PM is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/sda1"
# end of Processor type and features
#
# Bus options (PCI etc.)
#
CONFIG_SBUS=y
CONFIG_SBUSCHAR=y
# CONFIG_SUN_LDOMS is not set
# CONFIG_SUN_OPENPROMFS is not set
# end of Bus options (PCI etc.)
CONFIG_COMPAT=y
#
# Misc Linux/SPARC drivers
#
# CONFIG_SUN_OPENPROMIO is not set
CONFIG_OBP_FLASH=y
CONFIG_TADPOLE_TS102_UCTRL=y
# CONFIG_ORACLE_DAX is not set
# end of Misc Linux/SPARC drivers
#
# General architecture-dependent options
#
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_HAVE_64BIT_ALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_NMI_WATCHDOG=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_MMU_GATHER_NO_FLUSH_CACHE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_SECCOMP=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_TIF_NOHZ=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ALTERNATE_USER_ADDRESS_SPACE=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ISA_BUS_API=y
CONFIG_ODD_RT_SIGACTION=y
CONFIG_OLD_SIGSUSPEND=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CPU_NO_EFFICIENT_FFS=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# end of GCOV-based kernel profiling
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_BLOCK_LEGACY_AUTOLOAD is not set
CONFIG_BLK_ICQ=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_DEBUG_FS is not set
CONFIG_BLK_SED_OPAL=y
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
# CONFIG_ACORN_PARTITION_EESOX is not set
# CONFIG_ACORN_PARTITION_ICS is not set
# CONFIG_ACORN_PARTITION_ADFS is not set
CONFIG_ACORN_PARTITION_POWERTEC=y
# CONFIG_ACORN_PARTITION_RISCIX is not set
CONFIG_AIX_PARTITION=y
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
# end of IO Schedulers
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
#
# Executable file formats
#
# CONFIG_BINFMT_ELF is not set
# CONFIG_BINFMT_SCRIPT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_DEFAULT_ON is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="deflate"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_ZSMALLOC_STAT is not set
#
# SLAB allocator options
#
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
# end of SLAB allocator options
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_COMPAT_BRK=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
# CONFIG_BALLOON_COMPACTION is not set
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
CONFIG_PAGE_IDLE_FLAG=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PERCPU_STATS=y
CONFIG_GUP_TEST=y
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_USERFAULTFD=y
#
# Data Access Monitoring
#
CONFIG_DAMON=y
# CONFIG_DAMON_VADDR is not set
CONFIG_DAMON_PADDR=y
# CONFIG_DAMON_SYSFS is not set
# CONFIG_DAMON_RECLAIM is not set
CONFIG_DAMON_LRU_SORT=y
# end of Data Access Monitoring
# end of Memory Management options
# CONFIG_NET is not set
#
# Device Drivers
#
CONFIG_HAVE_PCI=y
# CONFIG_PCI is not set
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
#
# PC-card bridges
#
#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_DEVTMPFS_SAFE=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
# CONFIG_FW_LOADER_COMPRESS_ZSTD is not set
CONFIG_FW_UPLOAD=y
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
# CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=y
CONFIG_REGMAP_SPMI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
# end of Generic Driver Options
#
# Bus devices
#
CONFIG_ARM_INTEGRATOR_LM=y
# CONFIG_BT1_APB is not set
CONFIG_BT1_AXI=y
CONFIG_HISILICON_LPC=y
# CONFIG_INTEL_IXP4XX_EB is not set
CONFIG_QCOM_EBI2=y
CONFIG_MHI_BUS=y
CONFIG_MHI_BUS_DEBUG=y
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# CONFIG_ARM_SCMI_PROTOCOL is not set
# CONFIG_ARM_SCMI_POWER_DOMAIN is not set
CONFIG_ARM_SCMI_POWER_CONTROL=y
# end of ARM System Control and Management Interface Protocol
# CONFIG_ARM_SCPI_PROTOCOL is not set
CONFIG_ARM_SCPI_POWER_DOMAIN=y
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
CONFIG_MTK_ADSP_IPC=y
CONFIG_QCOM_SCM=y
CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT=y
CONFIG_TURRIS_MOX_RWTM=y
CONFIG_BCM47XX_NVRAM=y
# CONFIG_BCM47XX_SPROM is not set
# CONFIG_TEE_BNXT_FW is not set
CONFIG_CS_DSP=y
# CONFIG_GOOGLE_FIRMWARE is not set
CONFIG_IMX_DSP=y
CONFIG_IMX_SCU=y
CONFIG_IMX_SCU_PD=y
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=y
CONFIG_GNSS_MTK_SERIAL=y
CONFIG_GNSS_SIRF_SERIAL=y
CONFIG_GNSS_UBX_SERIAL=y
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_ALL_DTBS is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_PROMTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_FD_RAWCMD=y
CONFIG_ZRAM=y
CONFIG_ZRAM_DEF_COMP_LZ4HC=y
CONFIG_ZRAM_DEF_COMP="lz4hc"
# CONFIG_ZRAM_WRITEBACK is not set
CONFIG_ZRAM_MEMORY_TRACKING=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
#
# DRBD disabled because PROC_FS or INET not selected
#
# CONFIG_BLK_DEV_RAM is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_UBLK is not set
#
# NVME Support
#
# CONFIG_NVME_FC is not set
# CONFIG_NVME_APPLE is not set
# CONFIG_NVME_TARGET is not set
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_DUMMY_IRQ=y
# CONFIG_ICS932S401 is not set
CONFIG_ATMEL_SSC=y
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_HI6421V600_IRQ is not set
# CONFIG_QCOM_COINCELL is not set
CONFIG_QCOM_FASTRPC=y
# CONFIG_APDS9802ALS is not set
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
# CONFIG_HMC6352 is not set
CONFIG_DS1682=y
CONFIG_SRAM=y
CONFIG_XILINX_SDFEC=y
# CONFIG_OPEN_DICE is not set
CONFIG_VCPU_STALL_DETECTOR=y
CONFIG_C2PORT=y
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_IDT_89HPESX=y
CONFIG_EEPROM_EE1004=y
# end of EEPROM support
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=y
CONFIG_ALTERA_STAPL=y
CONFIG_ECHO=y
CONFIG_UACCE=y
# CONFIG_PVPANIC is not set
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI_COMMON=y
# CONFIG_SCSI is not set
# end of SCSI device support
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
# CONFIG_BCACHE is not set
# CONFIG_BLK_DEV_DM is not set
CONFIG_TARGET_CORE=y
# CONFIG_TCM_IBLOCK is not set
CONFIG_TCM_FILEIO=y
# CONFIG_SBP_TARGET is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
# end of IEEE 1394 (FireWire) support
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
CONFIG_INPUT_VIVALDIFMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_SERIAL_WACOM4=y
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ADC is not set
CONFIG_TOUCHSCREEN_AR1021_I2C=y
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
CONFIG_TOUCHSCREEN_AUO_PIXCIR=y
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_TOUCHSCREEN_BU21029=y
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=y
CONFIG_TOUCHSCREEN_CY8CTMA140=y
CONFIG_TOUCHSCREEN_CY8CTMG110=y
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP4_I2C=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
CONFIG_TOUCHSCREEN_EXC3000=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GOODIX=y
# CONFIG_TOUCHSCREEN_HIDEEP is not set
# CONFIG_TOUCHSCREEN_HYCON_HY46XX is not set
CONFIG_TOUCHSCREEN_ILI210X=y
# CONFIG_TOUCHSCREEN_ILITEK is not set
CONFIG_TOUCHSCREEN_IPROC=y
CONFIG_TOUCHSCREEN_S6SY761=y
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_EKTF2127=y
CONFIG_TOUCHSCREEN_ELAN=y
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=y
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
CONFIG_TOUCHSCREEN_MSG2638=y
CONFIG_TOUCHSCREEN_MTOUCH=y
# CONFIG_TOUCHSCREEN_IMAGIS is not set
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
# CONFIG_TOUCHSCREEN_INEXIO is not set
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
# CONFIG_TOUCHSCREEN_RASPBERRYPI_FW is not set
CONFIG_TOUCHSCREEN_MIGOR=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set
CONFIG_TOUCHSCREEN_UCB1400=y
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
CONFIG_TOUCHSCREEN_WM831X=y
CONFIG_TOUCHSCREEN_WM97XX=y
# CONFIG_TOUCHSCREEN_WM9705 is not set
# CONFIG_TOUCHSCREEN_WM9712 is not set
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_MXS_LRADC=y
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TS4800=y
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
CONFIG_TOUCHSCREEN_TSC2004=y
CONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
CONFIG_TOUCHSCREEN_SIS_I2C=y
CONFIG_TOUCHSCREEN_ST1232=y
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SUN4I is not set
CONFIG_TOUCHSCREEN_SX8654=y
CONFIG_TOUCHSCREEN_TPS6507X=y
CONFIG_TOUCHSCREEN_ZET6223=y
# CONFIG_TOUCHSCREEN_ZFORCE is not set
CONFIG_TOUCHSCREEN_ROHM_BU21023=y
CONFIG_TOUCHSCREEN_IQS5XX=y
CONFIG_TOUCHSCREEN_ZINITIX=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
# CONFIG_INPUT_ARIZONA_HAPTICS is not set
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
CONFIG_INPUT_BMA150=y
CONFIG_INPUT_E3X0_BUTTON=y
# CONFIG_INPUT_PM8941_PWRKEY is not set
CONFIG_INPUT_PM8XXX_VIBRATOR=y
# CONFIG_INPUT_MAX77650_ONKEY is not set
CONFIG_INPUT_MAX77693_HAPTIC=y
CONFIG_INPUT_MAX8997_HAPTIC=y
CONFIG_INPUT_MC13783_PWRBUTTON=y
CONFIG_INPUT_MMA8450=y
# CONFIG_INPUT_GPIO_BEEPER is not set
CONFIG_INPUT_GPIO_DECODER=y
# CONFIG_INPUT_GPIO_VIBRA is not set
CONFIG_INPUT_KXTJ9=y
CONFIG_INPUT_REGULATOR_HAPTIC=y
# CONFIG_INPUT_TPS65218_PWRBUTTON is not set
# CONFIG_INPUT_AXP20X_PEK is not set
CONFIG_INPUT_TWL6040_VIBRA=y
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PCF50633_PMU=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
CONFIG_INPUT_PWM_VIBRA=y
# CONFIG_INPUT_RK805_PWRKEY is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
CONFIG_INPUT_DA7280_HAPTICS=y
CONFIG_INPUT_DA9055_ONKEY=y
# CONFIG_INPUT_DA9063_ONKEY is not set
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_ADXL34X=y
CONFIG_INPUT_ADXL34X_I2C=y
CONFIG_INPUT_IQS269A=y
# CONFIG_INPUT_IQS626A is not set
CONFIG_INPUT_IQS7222=y
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
CONFIG_INPUT_DRV260X_HAPTICS=y
CONFIG_INPUT_DRV2665_HAPTICS=y
# CONFIG_INPUT_DRV2667_HAPTICS is not set
CONFIG_INPUT_HISI_POWERKEY=y
CONFIG_INPUT_RAVE_SP_PWRBUTTON=y
CONFIG_INPUT_SC27XX_VIBRA=y
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
# CONFIG_SERIO_OLPC_APSP is not set
CONFIG_SERIO_SUN4I_PS2=y
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=y
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
# CONFIG_VT_CONSOLE is not set
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_LDISC_AUTOLOAD is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_16550A_VARIANTS=y
# CONFIG_SERIAL_8250_FINTEK is not set
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_MEN_MCB is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_ASPEED_VUART=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_BCM2835AUX=y
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_EM is not set
CONFIG_SERIAL_8250_IOC3=y
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_OMAP is not set
# CONFIG_SERIAL_8250_LPC18XX is not set
# CONFIG_SERIAL_8250_MT6577 is not set
# CONFIG_SERIAL_8250_UNIPHIER is not set
CONFIG_SERIAL_8250_INGENIC=y
CONFIG_SERIAL_8250_PXA=y
# CONFIG_SERIAL_8250_TEGRA is not set
# CONFIG_SERIAL_8250_BCM7271 is not set
CONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_AMBA_PL010=y
# CONFIG_SERIAL_AMBA_PL010_CONSOLE is not set
CONFIG_SERIAL_ATMEL=y
# CONFIG_SERIAL_ATMEL_CONSOLE is not set
CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_KGDB_NMI=y
CONFIG_SERIAL_MESON=y
# CONFIG_SERIAL_MESON_CONSOLE is not set
CONFIG_SERIAL_CLPS711X=y
CONFIG_SERIAL_CLPS711X_CONSOLE=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
# CONFIG_SERIAL_SAMSUNG_CONSOLE is not set
CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_TEGRA_TCU=y
# CONFIG_SERIAL_TEGRA_TCU_CONSOLE is not set
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_IMX_EARLYCON=y
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_SUNCORE=y
# CONFIG_SERIAL_SUNZILOG is not set
# CONFIG_SERIAL_SUNHV is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=2
# CONFIG_SERIAL_SH_SCI_CONSOLE is not set
CONFIG_SERIAL_SH_SCI_EARLYCON=y
# CONFIG_SERIAL_HS_LPC32XX is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_MSM is not set
# CONFIG_SERIAL_QCOM_GENI is not set
CONFIG_SERIAL_VT8500=y
# CONFIG_SERIAL_VT8500_CONSOLE is not set
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
CONFIG_SERIAL_SIFIVE=y
# CONFIG_SERIAL_SIFIVE_CONSOLE is not set
CONFIG_SERIAL_LANTIQ=y
# CONFIG_SERIAL_LANTIQ_CONSOLE is not set
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
CONFIG_SERIAL_SC16IS7XX_CORE=y
CONFIG_SERIAL_SC16IS7XX=y
CONFIG_SERIAL_SC16IS7XX_I2C=y
CONFIG_SERIAL_TIMBERDALE=y
# CONFIG_SERIAL_BCM63XX is not set
CONFIG_SERIAL_GRLIB_GAISLER_APBUART=y
CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS=y
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_MXS_AUART is not set
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
# CONFIG_SERIAL_MPS2_UART is not set
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
CONFIG_SERIAL_ST_ASC=y
CONFIG_SERIAL_ST_ASC_CONSOLE=y
CONFIG_SERIAL_MEN_Z135=y
# CONFIG_SERIAL_SPRD is not set
CONFIG_SERIAL_STM32=y
# CONFIG_SERIAL_STM32_CONSOLE is not set
CONFIG_SERIAL_MVEBU_UART=y
# CONFIG_SERIAL_MVEBU_CONSOLE is not set
CONFIG_SERIAL_OWL=y
# CONFIG_SERIAL_OWL_CONSOLE is not set
CONFIG_SERIAL_RDA=y
# CONFIG_SERIAL_RDA_CONSOLE is not set
CONFIG_SERIAL_MILBEAUT_USIO=y
CONFIG_SERIAL_MILBEAUT_USIO_PORTS=4
CONFIG_SERIAL_MILBEAUT_USIO_CONSOLE=y
CONFIG_SERIAL_LITEUART=y
CONFIG_SERIAL_LITEUART_MAX_PORTS=1
CONFIG_SERIAL_LITEUART_CONSOLE=y
# CONFIG_SERIAL_SUNPLUS is not set
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_GOLDFISH_TTY=y
CONFIG_GOLDFISH_TTY_EARLY_CONSOLE=y
CONFIG_NULL_TTY=y
CONFIG_HVC_DRIVER=y
CONFIG_RPMSG_TTY=y
CONFIG_SERIAL_DEV_BUS=y
# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
CONFIG_TTY_PRINTK=y
CONFIG_TTY_PRINTK_LEVEL=6
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_IPMB=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_IPMI_KCS_BMC=y
CONFIG_ASPEED_KCS_IPMI_BMC=y
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
CONFIG_IPMI_KCS_BMC_CDEV_IPMI=y
# CONFIG_IPMI_KCS_BMC_SERIO is not set
# CONFIG_ASPEED_BT_IPMI_BMC is not set
CONFIG_IPMB_DEVICE_INTERFACE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_ATMEL=y
# CONFIG_HW_RANDOM_BA431 is not set
# CONFIG_HW_RANDOM_BCM2835 is not set
CONFIG_HW_RANDOM_IPROC_RNG200=y
# CONFIG_HW_RANDOM_N2RNG is not set
CONFIG_HW_RANDOM_IXP4XX=y
# CONFIG_HW_RANDOM_OMAP is not set
CONFIG_HW_RANDOM_OMAP3_ROM=y
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_HW_RANDOM_IMX_RNGC=y
CONFIG_HW_RANDOM_NOMADIK=y
CONFIG_HW_RANDOM_STM32=y
CONFIG_HW_RANDOM_POLARFIRE_SOC=y
CONFIG_HW_RANDOM_MESON=y
# CONFIG_HW_RANDOM_MTK is not set
# CONFIG_HW_RANDOM_EXYNOS is not set
CONFIG_HW_RANDOM_NPCM=y
CONFIG_HW_RANDOM_KEYSTONE=y
CONFIG_HW_RANDOM_CCTRNG=y
# CONFIG_HW_RANDOM_XIPHERA is not set
CONFIG_DEVMEM=y
# CONFIG_TCG_TPM is not set
CONFIG_XILLYBUS_CLASS=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_OF=y
CONFIG_ADI=y
CONFIG_RANDOM_TRUST_CPU=y
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
# CONFIG_I2C_MUX_GPIO is not set
CONFIG_I2C_MUX_GPMUX=y
CONFIG_I2C_MUX_LTC4306=y
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_DEMUX_PINCTRL=y
CONFIG_I2C_MUX_MLXCPLD=y
# end of Multiplexer I2C Chip support
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=y
# end of I2C Algorithms
#
# I2C Hardware Bus support
#
CONFIG_I2C_HIX5HD2=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_ALTERA=y
CONFIG_I2C_ASPEED=y
CONFIG_I2C_AT91=y
# CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL is not set
# CONFIG_I2C_AXXIA is not set
# CONFIG_I2C_BCM2835 is not set
CONFIG_I2C_BCM_IPROC=y
CONFIG_I2C_BCM_KONA=y
CONFIG_I2C_BRCMSTB=y
CONFIG_I2C_CADENCE=y
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DAVINCI is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
CONFIG_I2C_DIGICOLOR=y
CONFIG_I2C_EMEV2=y
# CONFIG_I2C_EXYNOS5 is not set
CONFIG_I2C_GPIO=y
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
# CONFIG_I2C_HIGHLANDER is not set
# CONFIG_I2C_HISI is not set
CONFIG_I2C_IMG=y
CONFIG_I2C_IMX=y
# CONFIG_I2C_IMX_LPI2C is not set
CONFIG_I2C_IOP3XX=y
CONFIG_I2C_JZ4780=y
CONFIG_I2C_KEMPLD=y
CONFIG_I2C_LPC2K=y
CONFIG_I2C_MESON=y
# CONFIG_I2C_MICROCHIP_CORE is not set
CONFIG_I2C_MT65XX=y
CONFIG_I2C_MT7621=y
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_MXS=y
CONFIG_I2C_NPCM=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_OMAP=y
CONFIG_I2C_OWL=y
# CONFIG_I2C_APPLE is not set
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_PNX=y
CONFIG_I2C_PXA=y
# CONFIG_I2C_PXA_SLAVE is not set
CONFIG_I2C_QCOM_CCI=y
# CONFIG_I2C_QCOM_GENI is not set
CONFIG_I2C_QUP=y
CONFIG_I2C_RIIC=y
CONFIG_I2C_RK3X=y
CONFIG_I2C_RZV2M=y
CONFIG_I2C_S3C2410=y
# CONFIG_I2C_SH_MOBILE is not set
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_SPRD=y
CONFIG_I2C_ST=y
# CONFIG_I2C_STM32F4 is not set
CONFIG_I2C_STM32F7=y
CONFIG_I2C_SUN6I_P2WI=y
CONFIG_I2C_SYNQUACER=y
CONFIG_I2C_TEGRA=y
# CONFIG_I2C_TEGRA_BPMP is not set
# CONFIG_I2C_UNIPHIER is not set
CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_VERSATILE=y
# CONFIG_I2C_WMT is not set
CONFIG_I2C_XILINX=y
CONFIG_I2C_XLP9XX=y
CONFIG_I2C_RCAR=y
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_TAOS_EVM is not set
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_I2C_FSI=y
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
# CONFIG_I2C_SLAVE_TESTUNIT is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# end of I2C support
CONFIG_I3C=y
CONFIG_CDNS_I3C_MASTER=y
CONFIG_DW_I3C_MASTER=y
# CONFIG_SVC_I3C_MASTER is not set
CONFIG_MIPI_I3C_HCI=y
# CONFIG_SPI is not set
CONFIG_SPMI=y
# CONFIG_SPMI_HISI3670 is not set
# CONFIG_SPMI_MSM_PMIC_ARB is not set
CONFIG_SPMI_MTK_PMIF=y
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=y
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y
# CONFIG_NTP_PPS is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=y
CONFIG_PPS_CLIENT_GPIO=y
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_AT91PIO4=y
# CONFIG_PINCTRL_AXP209 is not set
# CONFIG_PINCTRL_BM1880 is not set
# CONFIG_PINCTRL_DA850_PUPD is not set
# CONFIG_PINCTRL_DA9062 is not set
CONFIG_PINCTRL_EQUILIBRIUM=y
# CONFIG_PINCTRL_INGENIC is not set
# CONFIG_PINCTRL_LPC18XX is not set
# CONFIG_PINCTRL_MAX77620 is not set
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
CONFIG_PINCTRL_OCELOT=y
# CONFIG_PINCTRL_PISTACHIO is not set
CONFIG_PINCTRL_RK805=y
CONFIG_PINCTRL_ROCKCHIP=y
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINCTRL_STARFIVE=y
# CONFIG_PINCTRL_STMFX is not set
# CONFIG_PINCTRL_SX150X is not set
# CONFIG_PINCTRL_OWL is not set
CONFIG_PINCTRL_ASPEED=y
CONFIG_PINCTRL_ASPEED_G4=y
# CONFIG_PINCTRL_ASPEED_G5 is not set
CONFIG_PINCTRL_ASPEED_G6=y
# CONFIG_PINCTRL_BCM281XX is not set
CONFIG_PINCTRL_BCM2835=y
CONFIG_PINCTRL_BCM4908=y
CONFIG_PINCTRL_BCM63XX=y
# CONFIG_PINCTRL_BCM6318 is not set
# CONFIG_PINCTRL_BCM6328 is not set
CONFIG_PINCTRL_BCM6358=y
CONFIG_PINCTRL_BCM6362=y
CONFIG_PINCTRL_BCM6368=y
CONFIG_PINCTRL_BCM63268=y
# CONFIG_PINCTRL_IPROC_GPIO is not set
CONFIG_PINCTRL_CYGNUS_MUX=y
CONFIG_PINCTRL_NS=y
CONFIG_PINCTRL_NSP_GPIO=y
# CONFIG_PINCTRL_NS2_MUX is not set
# CONFIG_PINCTRL_NSP_MUX is not set
CONFIG_PINCTRL_BERLIN=y
CONFIG_PINCTRL_AS370=y
CONFIG_PINCTRL_BERLIN_BG4CT=y
#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers
#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
CONFIG_PINCTRL_MTK_V2=y
CONFIG_PINCTRL_MTK_MOORE=y
CONFIG_PINCTRL_MTK_PARIS=y
CONFIG_PINCTRL_MT2701=y
CONFIG_PINCTRL_MT7623=y
CONFIG_PINCTRL_MT7629=y
CONFIG_PINCTRL_MT8135=y
CONFIG_PINCTRL_MT8127=y
CONFIG_PINCTRL_MT2712=y
CONFIG_PINCTRL_MT6765=y
CONFIG_PINCTRL_MT6779=y
CONFIG_PINCTRL_MT6795=y
CONFIG_PINCTRL_MT6797=y
# CONFIG_PINCTRL_MT7622 is not set
# CONFIG_PINCTRL_MT7986 is not set
CONFIG_PINCTRL_MT8167=y
CONFIG_PINCTRL_MT8173=y
# CONFIG_PINCTRL_MT8183 is not set
CONFIG_PINCTRL_MT8186=y
# CONFIG_PINCTRL_MT8192 is not set
CONFIG_PINCTRL_MT8195=y
# CONFIG_PINCTRL_MT8365 is not set
CONFIG_PINCTRL_MT8516=y
# CONFIG_PINCTRL_MT6397 is not set
# end of MediaTek pinctrl drivers
CONFIG_PINCTRL_MESON=y
CONFIG_PINCTRL_WPCM450=y
CONFIG_PINCTRL_NPCM7XX=y
CONFIG_PINCTRL_PXA=y
# CONFIG_PINCTRL_PXA25X is not set
CONFIG_PINCTRL_PXA27X=y
# CONFIG_PINCTRL_MSM is not set
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
CONFIG_PINCTRL_SC7280_LPASS_LPI=y
CONFIG_PINCTRL_SM8250_LPASS_LPI=y
CONFIG_PINCTRL_LPASS_LPI=y
#
# Renesas pinctrl drivers
#
CONFIG_PINCTRL_RENESAS=y
CONFIG_PINCTRL_SH_PFC=y
CONFIG_PINCTRL_SH_PFC_GPIO=y
CONFIG_PINCTRL_SH_FUNC_GPIO=y
CONFIG_PINCTRL_PFC_EMEV2=y
CONFIG_PINCTRL_PFC_R8A77995=y
# CONFIG_PINCTRL_PFC_R8A7794 is not set
CONFIG_PINCTRL_PFC_R8A77990=y
# CONFIG_PINCTRL_PFC_R8A7779 is not set
CONFIG_PINCTRL_PFC_R8A7790=y
# CONFIG_PINCTRL_PFC_R8A77950 is not set
CONFIG_PINCTRL_PFC_R8A77951=y
# CONFIG_PINCTRL_PFC_R8A7778 is not set
# CONFIG_PINCTRL_PFC_R8A7793 is not set
# CONFIG_PINCTRL_PFC_R8A7791 is not set
# CONFIG_PINCTRL_PFC_R8A77965 is not set
# CONFIG_PINCTRL_PFC_R8A77960 is not set
# CONFIG_PINCTRL_PFC_R8A77961 is not set
CONFIG_PINCTRL_PFC_R8A779F0=y
CONFIG_PINCTRL_PFC_R8A7792=y
# CONFIG_PINCTRL_PFC_R8A77980 is not set
CONFIG_PINCTRL_PFC_R8A77970=y
# CONFIG_PINCTRL_PFC_R8A779A0 is not set
CONFIG_PINCTRL_PFC_R8A779G0=y
CONFIG_PINCTRL_PFC_R8A7740=y
# CONFIG_PINCTRL_PFC_R8A73A4 is not set
# CONFIG_PINCTRL_RZA1 is not set
CONFIG_PINCTRL_RZA2=y
CONFIG_PINCTRL_RZG2L=y
# CONFIG_PINCTRL_PFC_R8A77470 is not set
# CONFIG_PINCTRL_PFC_R8A7745 is not set
CONFIG_PINCTRL_PFC_R8A7742=y
CONFIG_PINCTRL_PFC_R8A7743=y
CONFIG_PINCTRL_PFC_R8A7744=y
# CONFIG_PINCTRL_PFC_R8A774C0 is not set
# CONFIG_PINCTRL_PFC_R8A774E1 is not set
CONFIG_PINCTRL_PFC_R8A774A1=y
# CONFIG_PINCTRL_PFC_R8A774B1 is not set
# CONFIG_PINCTRL_RZN1 is not set
# CONFIG_PINCTRL_RZV2M is not set
# CONFIG_PINCTRL_PFC_SH7203 is not set
# CONFIG_PINCTRL_PFC_SH7264 is not set
# CONFIG_PINCTRL_PFC_SH7269 is not set
# CONFIG_PINCTRL_PFC_SH7720 is not set
# CONFIG_PINCTRL_PFC_SH7722 is not set
# CONFIG_PINCTRL_PFC_SH7734 is not set
CONFIG_PINCTRL_PFC_SH7757=y
# CONFIG_PINCTRL_PFC_SH7785 is not set
CONFIG_PINCTRL_PFC_SH7786=y
# CONFIG_PINCTRL_PFC_SH73A0 is not set
CONFIG_PINCTRL_PFC_SH7723=y
# CONFIG_PINCTRL_PFC_SH7724 is not set
CONFIG_PINCTRL_PFC_SHX3=y
# end of Renesas pinctrl drivers
CONFIG_PINCTRL_SAMSUNG=y
# CONFIG_PINCTRL_EXYNOS is not set
# CONFIG_PINCTRL_S3C24XX is not set
CONFIG_PINCTRL_S3C64XX=y
CONFIG_PINCTRL_SPRD=y
CONFIG_PINCTRL_SPRD_SC9860=y
CONFIG_PINCTRL_STM32=y
# CONFIG_PINCTRL_STM32F429 is not set
# CONFIG_PINCTRL_STM32F469 is not set
CONFIG_PINCTRL_STM32F746=y
CONFIG_PINCTRL_STM32F769=y
CONFIG_PINCTRL_STM32H743=y
# CONFIG_PINCTRL_STM32MP135 is not set
CONFIG_PINCTRL_STM32MP157=y
CONFIG_PINCTRL_TI_IODELAY=y
# CONFIG_PINCTRL_UNIPHIER is not set
CONFIG_PINCTRL_VISCONTI=y
CONFIG_PINCTRL_TMPV7700=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
# CONFIG_GPIO_CDEV is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_REGMAP=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
CONFIG_GPIO_ASPEED=y
CONFIG_GPIO_ASPEED_SGPIO=y
# CONFIG_GPIO_ATH79 is not set
# CONFIG_GPIO_RASPBERRYPI_EXP is not set
# CONFIG_GPIO_BCM_KONA is not set
CONFIG_GPIO_BCM_XGS_IPROC=y
CONFIG_GPIO_BRCMSTB=y
CONFIG_GPIO_CADENCE=y
# CONFIG_GPIO_CLPS711X is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EIC_SPRD is not set
# CONFIG_GPIO_EM is not set
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=y
# CONFIG_GPIO_HISI is not set
CONFIG_GPIO_HLWD=y
CONFIG_GPIO_IOP=y
CONFIG_GPIO_LOGICVC=y
CONFIG_GPIO_LPC18XX=y
# CONFIG_GPIO_LPC32XX is not set
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_MENZ127=y
CONFIG_GPIO_MPC8XXX=y
# CONFIG_GPIO_MT7621 is not set
CONFIG_GPIO_MXC=y
CONFIG_GPIO_MXS=y
CONFIG_GPIO_PMIC_EIC_SPRD=y
CONFIG_GPIO_PXA=y
CONFIG_GPIO_RCAR=y
CONFIG_GPIO_RDA=y
# CONFIG_GPIO_ROCKCHIP is not set
CONFIG_GPIO_SAMA5D2_PIOBU=y
CONFIG_GPIO_SIFIVE=y
CONFIG_GPIO_SNPS_CREG=y
CONFIG_GPIO_SPRD=y
# CONFIG_GPIO_STP_XWAY is not set
CONFIG_GPIO_SYSCON=y
# CONFIG_GPIO_TEGRA is not set
# CONFIG_GPIO_TEGRA186 is not set
CONFIG_GPIO_TS4800=y
# CONFIG_GPIO_UNIPHIER is not set
CONFIG_GPIO_VISCONTI=y
# CONFIG_GPIO_WCD934X is not set
CONFIG_GPIO_XGENE_SB=y
# CONFIG_GPIO_XILINX is not set
CONFIG_GPIO_XLP=y
# CONFIG_GPIO_AMD_FCH is not set
# CONFIG_GPIO_IDT3243X is not set
# end of Memory mapped GPIO drivers
#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=y
CONFIG_GPIO_ADP5588_IRQ=y
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_GW_PLD=y
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
CONFIG_GPIO_PCA9570=y
CONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_TPIC2810 is not set
# CONFIG_GPIO_TS4900 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
# CONFIG_GPIO_ADP5520 is not set
CONFIG_GPIO_ARIZONA=y
# CONFIG_GPIO_BD71815 is not set
# CONFIG_GPIO_BD71828 is not set
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_KEMPLD=y
CONFIG_GPIO_LP3943=y
CONFIG_GPIO_LP873X=y
# CONFIG_GPIO_LP87565 is not set
CONFIG_GPIO_MAX77620=y
CONFIG_GPIO_MAX77650=y
CONFIG_GPIO_SL28CPLD=y
# CONFIG_GPIO_TC3589X is not set
# CONFIG_GPIO_TPS65218 is not set
# CONFIG_GPIO_TPS65910 is not set
# CONFIG_GPIO_TQMX86 is not set
CONFIG_GPIO_TWL6040=y
CONFIG_GPIO_UCB1400=y
# CONFIG_GPIO_WM831X is not set
# CONFIG_GPIO_WM8994 is not set
# end of MFD GPIO expanders
#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VIRTIO is not set
CONFIG_GPIO_SIM=y
# end of Virtual GPIO drivers
CONFIG_W1=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y
# CONFIG_W1_MASTER_SGI is not set
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2405=y
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
# CONFIG_W1_SLAVE_DS2413 is not set
# CONFIG_W1_SLAVE_DS2406 is not set
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2805=y
# CONFIG_W1_SLAVE_DS2430 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2438=y
CONFIG_W1_SLAVE_DS250X=y
CONFIG_W1_SLAVE_DS2780=y
# CONFIG_W1_SLAVE_DS2781 is not set
# CONFIG_W1_SLAVE_DS28E04 is not set
CONFIG_W1_SLAVE_DS28E17=y
# end of 1-wire Slaves
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_BRCMKONA is not set
# CONFIG_POWER_RESET_BRCMSTB is not set
CONFIG_POWER_RESET_GEMINI_POWEROFF=y
CONFIG_POWER_RESET_GPIO=y
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_POWER_RESET_OCELOT_RESET is not set
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_REGULATOR is not set
# CONFIG_POWER_RESET_RESTART is not set
# CONFIG_POWER_RESET_KEYSTONE is not set
# CONFIG_POWER_RESET_SYSCON is not set
# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
CONFIG_POWER_RESET_RMOBILE=y
CONFIG_REBOOT_MODE=y
CONFIG_SYSCON_REBOOT_MODE=y
# CONFIG_POWER_RESET_SC27XX is not set
CONFIG_NVMEM_REBOOT_MODE=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_POWER_SUPPLY_HWMON is not set
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_IP5XXX_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
CONFIG_TEST_POWER=y
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_ACT8945A is not set
CONFIG_BATTERY_CW2015=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
# CONFIG_BATTERY_DS2781 is not set
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_LEGO_EV3=y
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_WM97XX is not set
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=y
CONFIG_MANAGER_SBS=y
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
# CONFIG_BATTERY_BQ27XXX_HDQ is not set
CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM=y
CONFIG_BATTERY_DA9150=y
CONFIG_CHARGER_AXP20X=y
# CONFIG_BATTERY_AXP20X is not set
# CONFIG_AXP20X_POWER is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_BATTERY_MAX17042=y
# CONFIG_BATTERY_MAX1721X is not set
# CONFIG_CHARGER_PCF50633 is not set
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_LP8788=y
# CONFIG_CHARGER_GPIO is not set
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_LTC4162L is not set
CONFIG_CHARGER_MAX14577=y
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
CONFIG_CHARGER_MAX77650=y
CONFIG_CHARGER_MAX77693=y
CONFIG_CHARGER_MAX77976=y
CONFIG_CHARGER_MAX8997=y
# CONFIG_CHARGER_MT6360 is not set
CONFIG_CHARGER_QCOM_SMBB=y
# CONFIG_CHARGER_BQ2415X is not set
CONFIG_CHARGER_BQ24190=y
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
CONFIG_CHARGER_BQ2515X=y
CONFIG_CHARGER_BQ25890=y
# CONFIG_CHARGER_BQ25980 is not set
CONFIG_CHARGER_BQ256XX=y
CONFIG_CHARGER_SMB347=y
# CONFIG_CHARGER_TPS65090 is not set
CONFIG_CHARGER_TPS65217=y
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_BATTERY_GOLDFISH=y
CONFIG_BATTERY_RT5033=y
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_CROS_USBPD is not set
CONFIG_CHARGER_CROS_PCHG=y
# CONFIG_CHARGER_SC2731 is not set
CONFIG_FUEL_GAUGE_SC27XX=y
# CONFIG_CHARGER_UCS1002 is not set
CONFIG_CHARGER_BD99954=y
CONFIG_RN5T618_POWER=y
CONFIG_BATTERY_UG3105=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=y
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM1177=y
CONFIG_SENSORS_ADM9240=y
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_ADT7475=y
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AS370 is not set
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_AXI_FAN_CONTROL=y
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ASPEED=y
CONFIG_SENSORS_ATXP1=y
# CONFIG_SENSORS_BT1_PVT is not set
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DA9055=y
# CONFIG_SENSORS_SPARX5 is not set
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
# CONFIG_SENSORS_GSC is not set
# CONFIG_SENSORS_MC13783_ADC is not set
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_FTSTEUTATES=y
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=y
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=y
CONFIG_SENSORS_IBMPEX=y
# CONFIG_SENSORS_IIO_HWMON is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
CONFIG_SENSORS_POWR1220=y
CONFIG_SENSORS_LAN966X=y
CONFIG_SENSORS_LINEAGE=y
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
CONFIG_SENSORS_LTC2990=y
CONFIG_SENSORS_LTC2992=y
CONFIG_SENSORS_LTC4151=y
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
CONFIG_SENSORS_MAX127=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_MAX31730=y
CONFIG_SENSORS_MAX6620=y
CONFIG_SENSORS_MAX6621=y
CONFIG_SENSORS_MAX6639=y
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_MAX31790=y
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
CONFIG_SENSORS_TPS23861=y
CONFIG_SENSORS_MR75203=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM73=y
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=y
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LM95234=y
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_NCT6683=y
CONFIG_SENSORS_NCT6775_CORE=y
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_NCT6775_I2C=y
# CONFIG_SENSORS_NCT7802 is not set
CONFIG_SENSORS_NCT7904=y
CONFIG_SENSORS_NPCM7XX=y
CONFIG_SENSORS_NSA320=y
CONFIG_SENSORS_OCC_P8_I2C=y
CONFIG_SENSORS_OCC=y
CONFIG_SENSORS_PCF8591=y
# CONFIG_SENSORS_PECI_CPUTEMP is not set
CONFIG_SENSORS_PECI_DIMMTEMP=y
CONFIG_SENSORS_PECI=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
CONFIG_SENSORS_ADM1266=y
# CONFIG_SENSORS_ADM1275 is not set
# CONFIG_SENSORS_BEL_PFE is not set
CONFIG_SENSORS_BPA_RS600=y
CONFIG_SENSORS_DELTA_AHE50DC_FAN=y
CONFIG_SENSORS_FSP_3Y=y
CONFIG_SENSORS_IBM_CFFPS=y
CONFIG_SENSORS_DPS920AB=y
# CONFIG_SENSORS_INSPUR_IPSPS is not set
# CONFIG_SENSORS_IR35221 is not set
# CONFIG_SENSORS_IR36021 is not set
# CONFIG_SENSORS_IR38064 is not set
# CONFIG_SENSORS_IRPS5401 is not set
# CONFIG_SENSORS_ISL68137 is not set
CONFIG_SENSORS_LM25066=y
# CONFIG_SENSORS_LM25066_REGULATOR is not set
# CONFIG_SENSORS_LT7182S is not set
# CONFIG_SENSORS_LTC2978 is not set
# CONFIG_SENSORS_LTC3815 is not set
CONFIG_SENSORS_MAX15301=y
CONFIG_SENSORS_MAX16064=y
CONFIG_SENSORS_MAX16601=y
CONFIG_SENSORS_MAX20730=y
CONFIG_SENSORS_MAX20751=y
CONFIG_SENSORS_MAX31785=y
# CONFIG_SENSORS_MAX34440 is not set
CONFIG_SENSORS_MAX8688=y
# CONFIG_SENSORS_MP2888 is not set
CONFIG_SENSORS_MP2975=y
# CONFIG_SENSORS_MP5023 is not set
CONFIG_SENSORS_PIM4328=y
CONFIG_SENSORS_PLI1209BC=y
# CONFIG_SENSORS_PLI1209BC_REGULATOR is not set
CONFIG_SENSORS_PM6764TR=y
CONFIG_SENSORS_PXE1610=y
CONFIG_SENSORS_Q54SJ108A2=y
CONFIG_SENSORS_STPDDC60=y
CONFIG_SENSORS_TPS40422=y
CONFIG_SENSORS_TPS53679=y
# CONFIG_SENSORS_UCD9000 is not set
# CONFIG_SENSORS_UCD9200 is not set
CONFIG_SENSORS_XDPE152=y
CONFIG_SENSORS_XDPE122=y
# CONFIG_SENSORS_XDPE122_REGULATOR is not set
CONFIG_SENSORS_ZL6100=y
CONFIG_SENSORS_PWM_FAN=y
CONFIG_SENSORS_RASPBERRYPI_HWMON=y
CONFIG_SENSORS_SL28CPLD=y
CONFIG_SENSORS_SBTSI=y
CONFIG_SENSORS_SBRMI=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SHT3x=y
CONFIG_SENSORS_SHT4x=y
CONFIG_SENSORS_SHTC1=y
# CONFIG_SENSORS_SY7636A is not set
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_SCH56XX_COMMON=y
CONFIG_SENSORS_SCH5627=y
CONFIG_SENSORS_SCH5636=y
# CONFIG_SENSORS_STTS751 is not set
CONFIG_SENSORS_SMM665=y
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
CONFIG_SENSORS_INA2XX=y
# CONFIG_SENSORS_INA238 is not set
CONFIG_SENSORS_INA3221=y
CONFIG_SENSORS_TC74=y
CONFIG_SENSORS_THMC50=y
# CONFIG_SENSORS_TMP102 is not set
CONFIG_SENSORS_TMP103=y
CONFIG_SENSORS_TMP108=y
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_TMP464=y
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_W83773G=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_ULTRA45=y
CONFIG_THERMAL=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
# CONFIG_THERMAL_HWMON is not set
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_CPU_THERMAL is not set
CONFIG_DEVFREQ_THERMAL=y
CONFIG_THERMAL_EMULATION=y
# CONFIG_THERMAL_MMIO is not set
CONFIG_HISI_THERMAL=y
CONFIG_IMX_THERMAL=y
CONFIG_IMX_SC_THERMAL=y
CONFIG_IMX8MM_THERMAL=y
CONFIG_K3_THERMAL=y
CONFIG_MAX77620_THERMAL=y
CONFIG_QORIQ_THERMAL=y
CONFIG_SPEAR_THERMAL=y
CONFIG_SUN8I_THERMAL=y
CONFIG_ROCKCHIP_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_RCAR_GEN3_THERMAL=y
CONFIG_RZG2L_THERMAL=y
# CONFIG_KIRKWOOD_THERMAL is not set
CONFIG_DOVE_THERMAL=y
# CONFIG_ARMADA_THERMAL is not set
CONFIG_DA9062_THERMAL=y
CONFIG_MTK_THERMAL=y
#
# Intel thermal drivers
#
#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
# end of Intel thermal drivers
#
# Broadcom thermal drivers
#
CONFIG_BCM2711_THERMAL=y
# CONFIG_BCM2835_THERMAL is not set
CONFIG_BRCMSTB_THERMAL=y
CONFIG_BCM_NS_THERMAL=y
CONFIG_BCM_SR_THERMAL=y
# end of Broadcom thermal drivers
#
# Texas Instruments thermal drivers
#
CONFIG_TI_SOC_THERMAL=y
# CONFIG_TI_THERMAL is not set
# CONFIG_OMAP3_THERMAL is not set
CONFIG_OMAP4_THERMAL=y
# CONFIG_OMAP5_THERMAL is not set
CONFIG_DRA752_THERMAL=y
# end of Texas Instruments thermal drivers
#
# Samsung thermal drivers
#
CONFIG_EXYNOS_THERMAL=y
# end of Samsung thermal drivers
#
# NVIDIA Tegra thermal drivers
#
# CONFIG_TEGRA_SOCTHERM is not set
CONFIG_TEGRA_BPMP_THERMAL=y
CONFIG_TEGRA30_TSENSOR=y
# end of NVIDIA Tegra thermal drivers
CONFIG_GENERIC_ADC_THERMAL=y
#
# Qualcomm thermal drivers
#
CONFIG_QCOM_SPMI_ADC_TM5=y
# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
# end of Qualcomm thermal drivers
CONFIG_UNIPHIER_THERMAL=y
# CONFIG_SPRD_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is not set
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
# CONFIG_WATCHDOG_SYSFS is not set
CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT=y
#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=y
# CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC is not set
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_SOFT_WATCHDOG_PRETIMEOUT=y
CONFIG_BD957XMUF_WATCHDOG=y
CONFIG_DA9052_WATCHDOG=y
# CONFIG_DA9055_WATCHDOG is not set
CONFIG_DA9063_WATCHDOG=y
CONFIG_DA9062_WATCHDOG=y
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_MENF21BMC_WATCHDOG is not set
# CONFIG_MENZ069_WATCHDOG is not set
CONFIG_WM831X_WATCHDOG=y
# CONFIG_XILINX_WATCHDOG is not set
CONFIG_ZIIRAVE_WATCHDOG=y
# CONFIG_RAVE_SP_WATCHDOG is not set
CONFIG_SL28CPLD_WATCHDOG=y
CONFIG_ARMADA_37XX_WATCHDOG=y
# CONFIG_ASM9260_WATCHDOG is not set
CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_AT91SAM9X_WATCHDOG is not set
# CONFIG_SAMA5D4_WATCHDOG is not set
CONFIG_CADENCE_WATCHDOG=y
# CONFIG_FTWDT010_WATCHDOG is not set
CONFIG_S3C2410_WATCHDOG=y
# CONFIG_DW_WATCHDOG is not set
CONFIG_EP93XX_WATCHDOG=y
# CONFIG_OMAP_WATCHDOG is not set
CONFIG_PNX4008_WATCHDOG=y
CONFIG_DAVINCI_WATCHDOG=y
CONFIG_K3_RTI_WATCHDOG=y
# CONFIG_RN5T618_WATCHDOG is not set
CONFIG_SUNXI_WATCHDOG=y
CONFIG_NPCM7XX_WATCHDOG=y
CONFIG_STMP3XXX_RTC_WATCHDOG=y
CONFIG_TS4800_WATCHDOG=y
# CONFIG_TS72XX_WATCHDOG is not set
CONFIG_MAX63XX_WATCHDOG=y
CONFIG_MAX77620_WATCHDOG=y
CONFIG_IMX2_WDT=y
# CONFIG_IMX7ULP_WDT is not set
CONFIG_MOXART_WDT=y
CONFIG_ST_LPC_WATCHDOG=y
CONFIG_TEGRA_WATCHDOG=y
CONFIG_QCOM_WDT=y
CONFIG_MESON_GXBB_WATCHDOG=y
CONFIG_MESON_WATCHDOG=y
CONFIG_MEDIATEK_WATCHDOG=y
CONFIG_DIGICOLOR_WATCHDOG=y
CONFIG_LPC18XX_WATCHDOG=y
CONFIG_RENESAS_WDT=y
# CONFIG_RENESAS_RZAWDT is not set
# CONFIG_RENESAS_RZN1WDT is not set
# CONFIG_RENESAS_RZG2LWDT is not set
CONFIG_ASPEED_WATCHDOG=y
CONFIG_UNIPHIER_WATCHDOG=y
CONFIG_RTD119X_WATCHDOG=y
# CONFIG_REALTEK_OTTO_WDT is not set
CONFIG_SPRD_WATCHDOG=y
CONFIG_PM8916_WATCHDOG=y
CONFIG_VISCONTI_WATCHDOG=y
CONFIG_MSC313E_WATCHDOG=y
CONFIG_APPLE_WATCHDOG=y
CONFIG_SUNPLUS_WATCHDOG=y
CONFIG_SC520_WDT=y
CONFIG_KEMPLD_WDT=y
# CONFIG_BCM47XX_WDT is not set
CONFIG_BCM2835_WDT=y
# CONFIG_BCM_KONA_WDT is not set
CONFIG_BCM7038_WDT=y
# CONFIG_IMGPDC_WDT is not set
CONFIG_MPC5200_WDT=y
# CONFIG_MEN_A21_WDT is not set
CONFIG_WATCHDOG_SUN4V=y
# CONFIG_UML_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
# CONFIG_BCMA_HOST_SOC is not set
# CONFIG_BCMA_DRIVER_MIPS is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_SUN4I_GPADC=y
CONFIG_MFD_AS3711=y
# CONFIG_MFD_AS3722 is not set
CONFIG_PMIC_ADP5520=y
# CONFIG_MFD_AAT2870_CORE is not set
CONFIG_MFD_AT91_USART=y
CONFIG_MFD_ATMEL_FLEXCOM=y
# CONFIG_MFD_ATMEL_HLCDC is not set
CONFIG_MFD_ATMEL_SMC=y
CONFIG_MFD_BCM590XX=y
# CONFIG_MFD_BD9571MWV is not set
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_CROS_EC_DEV=y
# CONFIG_MFD_MADERA is not set
CONFIG_MFD_ASIC3=y
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
CONFIG_MFD_ENE_KB3930=y
CONFIG_MFD_EXYNOS_LPASS=y
CONFIG_MFD_GATEWORKS_GSC=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_I2C=y
# CONFIG_MFD_MP2629 is not set
CONFIG_MFD_MXS_LRADC=y
# CONFIG_MFD_MX25_TSADC is not set
# CONFIG_MFD_HI6421_PMIC is not set
CONFIG_MFD_HI6421_SPMI=y
CONFIG_MFD_HI655X_PMIC=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_MFD_IQS62X=y
CONFIG_MFD_KEMPLD=y
# CONFIG_MFD_88PM800 is not set
CONFIG_MFD_88PM805=y
# CONFIG_MFD_88PM860X is not set
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77620=y
CONFIG_MFD_MAX77650=y
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX77714=y
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
# CONFIG_MFD_MAX8925 is not set
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6360=y
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
CONFIG_MFD_NTXEC=y
# CONFIG_MFD_RETU is not set
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_UCB1400_CORE=y
# CONFIG_MFD_PM8XXX is not set
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_RT4831=y
CONFIG_MFD_RT5033=y
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_RK808=y
CONFIG_MFD_RN5T618=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
# CONFIG_MFD_SIMPLE_MFD_I2C is not set
# CONFIG_MFD_SL28CPLD is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SUN6I_PRCM=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
# CONFIG_MFD_TPS65086 is not set
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TI_LP87565=y
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_TWL4030_CORE is not set
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
CONFIG_MFD_TC3589X=y
CONFIG_MFD_TQMX86=y
# CONFIG_MFD_LOCHNAGAR is not set
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
# CONFIG_MFD_CS47L24 is not set
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
# CONFIG_MFD_WM8997 is not set
# CONFIG_MFD_WM8998 is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
# CONFIG_MFD_STW481X is not set
# CONFIG_MFD_ROHM_BD718XX is not set
CONFIG_MFD_ROHM_BD71828=y
CONFIG_MFD_ROHM_BD957XMUF=y
CONFIG_MFD_STM32_LPTIMER=y
CONFIG_MFD_STM32_TIMERS=y
# CONFIG_MFD_STPMIC1 is not set
# CONFIG_MFD_STMFX is not set
CONFIG_MFD_WCD934X=y
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_KHADAS_MCU is not set
# CONFIG_MFD_ACER_A500_EC is not set
# CONFIG_MFD_QCOM_PM8008 is not set
CONFIG_RAVE_SP_CORE=y
# CONFIG_MFD_RSMU_I2C is not set
# end of Multifunction device drivers
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=y
CONFIG_REGULATOR_ACT8865=y
# CONFIG_REGULATOR_ACT8945A is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
# CONFIG_REGULATOR_ARIZONA_LDO1 is not set
CONFIG_REGULATOR_ARIZONA_MICSUPP=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AXP20X=y
# CONFIG_REGULATOR_BCM590XX is not set
# CONFIG_REGULATOR_BD71815 is not set
# CONFIG_REGULATOR_BD71828 is not set
# CONFIG_REGULATOR_BD957XMUF is not set
CONFIG_REGULATOR_CROS_EC=y
# CONFIG_REGULATOR_DA9055 is not set
# CONFIG_REGULATOR_DA9062 is not set
CONFIG_REGULATOR_DA9063=y
# CONFIG_REGULATOR_DA9121 is not set
# CONFIG_REGULATOR_DA9210 is not set
CONFIG_REGULATOR_DA9211=y
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_FAN53880 is not set
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI655X=y
CONFIG_REGULATOR_HI6421V600=y
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=y
CONFIG_REGULATOR_LP3971=y
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
CONFIG_REGULATOR_LP873X=y
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_LP87565=y
CONFIG_REGULATOR_LP8788=y
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX77620 is not set
CONFIG_REGULATOR_MAX77650=y
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8893=y
# CONFIG_REGULATOR_MAX8907 is not set
CONFIG_REGULATOR_MAX8952=y
# CONFIG_REGULATOR_MAX8973 is not set
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX20086=y
CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MAX77802=y
# CONFIG_REGULATOR_MAX77826 is not set
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
# CONFIG_REGULATOR_MCP16502 is not set
CONFIG_REGULATOR_MP5416=y
CONFIG_REGULATOR_MP8859=y
CONFIG_REGULATOR_MP886X=y
# CONFIG_REGULATOR_MPQ7920 is not set
# CONFIG_REGULATOR_MT6311 is not set
CONFIG_REGULATOR_MT6315=y
# CONFIG_REGULATOR_MT6360 is not set
CONFIG_REGULATOR_MT6380=y
CONFIG_REGULATOR_PBIAS=y
# CONFIG_REGULATOR_PCA9450 is not set
CONFIG_REGULATOR_PCF50633=y
# CONFIG_REGULATOR_PF8X00 is not set
CONFIG_REGULATOR_PFUZE100=y
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88080 is not set
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_QCOM_RPMH=y
CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_REGULATOR_QCOM_SPMI=y
CONFIG_REGULATOR_QCOM_USB_VBUS=y
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=y
# CONFIG_REGULATOR_RK808 is not set
CONFIG_REGULATOR_RN5T618=y
# CONFIG_REGULATOR_RT4801 is not set
# CONFIG_REGULATOR_RT4831 is not set
# CONFIG_REGULATOR_RT5033 is not set
CONFIG_REGULATOR_RT5190A=y
CONFIG_REGULATOR_RT5759=y
# CONFIG_REGULATOR_RT6160 is not set
CONFIG_REGULATOR_RT6245=y
CONFIG_REGULATOR_RTQ2134=y
CONFIG_REGULATOR_RTMV20=y
CONFIG_REGULATOR_RTQ6752=y
CONFIG_REGULATOR_S2MPA01=y
# CONFIG_REGULATOR_S2MPS11 is not set
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_SC2731=y
CONFIG_REGULATOR_SLG51000=y
CONFIG_REGULATOR_STM32_BOOSTER=y
CONFIG_REGULATOR_STM32_VREFBUF=y
CONFIG_REGULATOR_STM32_PWR=y
CONFIG_REGULATOR_TI_ABB=y
CONFIG_REGULATOR_STW481X_VMMC=y
# CONFIG_REGULATOR_SY7636A is not set
# CONFIG_REGULATOR_SY8106A is not set
# CONFIG_REGULATOR_SY8824X is not set
CONFIG_REGULATOR_SY8827N=y
# CONFIG_REGULATOR_TPS51632 is not set
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS6286X=y
# CONFIG_REGULATOR_TPS65023 is not set
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65090=y
# CONFIG_REGULATOR_TPS65132 is not set
# CONFIG_REGULATOR_TPS65217 is not set
CONFIG_REGULATOR_TPS65218=y
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TPS68470=y
CONFIG_REGULATOR_UNIPHIER=y
# CONFIG_REGULATOR_VCTRL is not set
# CONFIG_REGULATOR_WM831X is not set
# CONFIG_REGULATOR_WM8400 is not set
CONFIG_REGULATOR_WM8994=y
CONFIG_REGULATOR_QCOM_LABIBB=y
# CONFIG_RC_CORE is not set
CONFIG_CEC_CORE=y
CONFIG_CEC_PIN=y
#
# CEC support
#
CONFIG_CEC_PIN_ERROR_INJ=y
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DEBUG_MM=y
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS=y
# CONFIG_DRM_DEBUG_MODESET_LOCK is not set
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DP_AUX_BUS=y
CONFIG_DRM_DISPLAY_HELPER=y
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_SCHED=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
# CONFIG_DRM_I2C_SIL164 is not set
CONFIG_DRM_I2C_NXP_TDA998X=y
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
CONFIG_DRM_HDLCD=y
# CONFIG_DRM_HDLCD_SHOW_UNDERRUN is not set
CONFIG_DRM_MALI_DISPLAY=y
CONFIG_DRM_KOMEDA=y
# end of ARM devices
CONFIG_DRM_KMB_DISPLAY=y
# CONFIG_DRM_VGEM is not set
CONFIG_DRM_VKMS=y
CONFIG_DRM_EXYNOS=y
#
# CRTCs
#
CONFIG_DRM_EXYNOS_FIMD=y
CONFIG_DRM_EXYNOS5433_DECON=y
# CONFIG_DRM_EXYNOS7_DECON is not set
# CONFIG_DRM_EXYNOS_MIXER is not set
CONFIG_DRM_EXYNOS_VIDI=y
#
# Encoders and Bridges
#
# CONFIG_DRM_EXYNOS_DPI is not set
CONFIG_DRM_EXYNOS_DSI=y
# CONFIG_DRM_EXYNOS_DP is not set
# CONFIG_DRM_EXYNOS_HDMI is not set
CONFIG_DRM_EXYNOS_MIC=y
#
# Sub-drivers
#
# CONFIG_DRM_EXYNOS_G2D is not set
CONFIG_DRM_EXYNOS_IPP=y
# CONFIG_DRM_EXYNOS_FIMC is not set
# CONFIG_DRM_EXYNOS_ROTATOR is not set
CONFIG_DRM_EXYNOS_SCALER=y
# CONFIG_DRM_EXYNOS_GSC is not set
CONFIG_DRM_RCAR_DW_HDMI=y
# CONFIG_DRM_RCAR_USE_LVDS is not set
CONFIG_DRM_RCAR_MIPI_DSI=y
CONFIG_DRM_SUN4I=y
CONFIG_DRM_SUN4I_HDMI=y
CONFIG_DRM_SUN4I_HDMI_CEC=y
CONFIG_DRM_SUN4I_BACKEND=y
# CONFIG_DRM_SUN6I_DSI is not set
CONFIG_DRM_SUN8I_DW_HDMI=y
CONFIG_DRM_SUN8I_MIXER=y
CONFIG_DRM_SUN8I_TCON_TOP=y
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_MSM=y
CONFIG_DRM_MSM_GPU_STATE=y
CONFIG_DRM_MSM_GPU_SUDO=y
CONFIG_DRM_MSM_MDSS=y
# CONFIG_DRM_MSM_MDP4 is not set
CONFIG_DRM_MSM_MDP5=y
# CONFIG_DRM_MSM_DPU is not set
CONFIG_DRM_MSM_DP=y
CONFIG_DRM_MSM_DSI=y
# CONFIG_DRM_MSM_DSI_28NM_PHY is not set
# CONFIG_DRM_MSM_DSI_20NM_PHY is not set
CONFIG_DRM_MSM_DSI_28NM_8960_PHY=y
# CONFIG_DRM_MSM_DSI_14NM_PHY is not set
CONFIG_DRM_MSM_DSI_10NM_PHY=y
CONFIG_DRM_MSM_DSI_7NM_PHY=y
CONFIG_DRM_MSM_HDMI=y
CONFIG_DRM_MSM_HDMI_HDCP=y
CONFIG_DRM_PANEL=y
#
# Display Panels
#
CONFIG_DRM_PANEL_ARM_VERSATILE=y
CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596=y
CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0=y
CONFIG_DRM_PANEL_BOE_HIMAX8279D=y
CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=y
CONFIG_DRM_PANEL_DSI_CM=y
# CONFIG_DRM_PANEL_LVDS is not set
CONFIG_DRM_PANEL_EBBG_FT8719=y
CONFIG_DRM_PANEL_ELIDA_KD35T133=y
# CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02 is not set
CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D=y
CONFIG_DRM_PANEL_ILITEK_ILI9881C=y
CONFIG_DRM_PANEL_INNOLUX_P079ZCA=y
CONFIG_DRM_PANEL_JDI_LT070ME05000=y
CONFIG_DRM_PANEL_JDI_R63452=y
CONFIG_DRM_PANEL_KHADAS_TS050=y
CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04=y
# CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W is not set
CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=y
# CONFIG_DRM_PANEL_NOVATEK_NT35510 is not set
CONFIG_DRM_PANEL_NOVATEK_NT35560=y
# CONFIG_DRM_PANEL_NOVATEK_NT35950 is not set
CONFIG_DRM_PANEL_NOVATEK_NT36672A=y
# CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set
# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=y
CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=y
CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=y
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=y
CONFIG_DRM_PANEL_RAYDIUM_RM67191=y
CONFIG_DRM_PANEL_RAYDIUM_RM68200=y
CONFIG_DRM_PANEL_RONBO_RB070D30=y
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=y
# CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI=y
# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_SOFEF00 is not set
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set
CONFIG_DRM_PANEL_SHARP_LS037V7DW01=y
# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
CONFIG_DRM_PANEL_SHARP_LS060T1SX01=y
# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
CONFIG_DRM_PANEL_SITRONIX_ST7703=y
CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521=y
# CONFIG_DRM_PANEL_TDO_TL070WSH30 is not set
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=y
CONFIG_DRM_PANEL_VISIONOX_RM69299=y
CONFIG_DRM_PANEL_XINPENG_XPP055C272=y
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_CDNS_DSI is not set
# CONFIG_DRM_CHIPONE_ICN6211 is not set
CONFIG_DRM_CHRONTEL_CH7033=y
CONFIG_DRM_CROS_EC_ANX7688=y
CONFIG_DRM_DISPLAY_CONNECTOR=y
# CONFIG_DRM_FSL_LDB is not set
CONFIG_DRM_ITE_IT6505=y
CONFIG_DRM_LONTIUM_LT8912B=y
CONFIG_DRM_LONTIUM_LT9211=y
CONFIG_DRM_LONTIUM_LT9611=y
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
CONFIG_DRM_ITE_IT66121=y
CONFIG_DRM_LVDS_CODEC=y
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
# CONFIG_DRM_NWL_MIPI_DSI is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
CONFIG_DRM_PARADE_PS8640=y
# CONFIG_DRM_SIL_SII8620 is not set
CONFIG_DRM_SII902X=y
# CONFIG_DRM_SII9234 is not set
CONFIG_DRM_SIMPLE_BRIDGE=y
CONFIG_DRM_THINE_THC63LVD1024=y
CONFIG_DRM_TOSHIBA_TC358762=y
CONFIG_DRM_TOSHIBA_TC358764=y
CONFIG_DRM_TOSHIBA_TC358767=y
CONFIG_DRM_TOSHIBA_TC358768=y
CONFIG_DRM_TOSHIBA_TC358775=y
CONFIG_DRM_TI_DLPC3433=y
# CONFIG_DRM_TI_TFP410 is not set
CONFIG_DRM_TI_SN65DSI83=y
CONFIG_DRM_TI_SN65DSI86=y
CONFIG_DRM_TI_TPD12S015=y
# CONFIG_DRM_ANALOGIX_ANX6345 is not set
CONFIG_DRM_ANALOGIX_ANX78XX=y
CONFIG_DRM_ANALOGIX_DP=y
# CONFIG_DRM_ANALOGIX_ANX7625 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
CONFIG_DRM_CDNS_MHDP8546=y
CONFIG_DRM_CDNS_MHDP8546_J721E=y
CONFIG_DRM_IMX8QM_LDB=y
CONFIG_DRM_IMX8QXP_LDB=y
CONFIG_DRM_IMX8QXP_PIXEL_COMBINER=y
# CONFIG_DRM_IMX8QXP_PIXEL_LINK is not set
CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI=y
CONFIG_DRM_DW_HDMI=y
CONFIG_DRM_DW_HDMI_AHB_AUDIO=y
CONFIG_DRM_DW_HDMI_I2S_AUDIO=y
CONFIG_DRM_DW_HDMI_GP_AUDIO=y
# CONFIG_DRM_DW_HDMI_CEC is not set
# end of Display Interface Bridges
CONFIG_DRM_IMX=y
# CONFIG_DRM_IMX_PARALLEL_DISPLAY is not set
CONFIG_DRM_IMX_TVE=y
# CONFIG_DRM_IMX_LDB is not set
CONFIG_DRM_IMX_HDMI=y
CONFIG_DRM_V3D=y
# CONFIG_DRM_VC4 is not set
# CONFIG_DRM_ETNAVIV is not set
CONFIG_DRM_LOGICVC=y
CONFIG_DRM_MXS=y
CONFIG_DRM_MXSFB=y
# CONFIG_DRM_IMX_LCDIF is not set
CONFIG_DRM_ARCPGU=y
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_DRM_PL111 is not set
# CONFIG_DRM_LIMA is not set
CONFIG_DRM_PANFROST=y
CONFIG_DRM_ASPEED_GFX=y
CONFIG_DRM_TIDSS=y
# CONFIG_DRM_SSD130X is not set
# CONFIG_DRM_SPRD is not set
CONFIG_DRM_LEGACY=y
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_NOMODESET=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
# CONFIG_FB is not set
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=y
# CONFIG_BACKLIGHT_LM3533 is not set
CONFIG_BACKLIGHT_OMAP1=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_QCOM_WLED=y
CONFIG_BACKLIGHT_RT4831=y
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=y
# CONFIG_BACKLIGHT_PCF50633 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
CONFIG_BACKLIGHT_LP8788=y
# CONFIG_BACKLIGHT_TPS65217 is not set
CONFIG_BACKLIGHT_AS3711=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
CONFIG_BACKLIGHT_ARCXCNN=y
CONFIG_BACKLIGHT_RAVE_SP=y
CONFIG_BACKLIGHT_LED=y
# end of Backlight & LCD device support
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# end of Console display driver support
# end of Graphics support
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_PCM=y
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_OSSEMUL is not set
# CONFIG_SND_PCM_TIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_CTL_FAST_LOOKUP=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
# CONFIG_SND_CTL_INPUT_VALIDATION is not set
CONFIG_SND_CTL_DEBUG=y
# CONFIG_SND_JACK_INJECTION_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_CTL_LED=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DRIVERS is not set
#
# HD-Audio
#
CONFIG_SND_HDA=y
CONFIG_SND_HDA_GENERIC_LEDS=y
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_RECONFIG is not set
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
# CONFIG_SND_HDA_PATCH_LOADER is not set
# CONFIG_SND_HDA_CODEC_REALTEK is not set
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
# CONFIG_SND_HDA_CODEC_HDMI is not set
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CS8409=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
# CONFIG_SND_HDA_CODEC_CA0110 is not set
CONFIG_SND_HDA_CODEC_CA0132=y
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# end of HD-Audio
CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_EXT_CORE=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=y
# CONFIG_SND_DICE is not set
CONFIG_SND_OXFW=y
CONFIG_SND_ISIGHT=y
CONFIG_SND_FIREWORKS=y
# CONFIG_SND_BEBOB is not set
CONFIG_SND_FIREWIRE_DIGI00X=y
CONFIG_SND_FIREWIRE_TASCAM=y
CONFIG_SND_FIREWIRE_MOTU=y
# CONFIG_SND_FIREFACE is not set
# CONFIG_SND_SPARC is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_ADI=y
CONFIG_SND_SOC_ADI_AXI_I2S=y
CONFIG_SND_SOC_ADI_AXI_SPDIF=y
# CONFIG_SND_SOC_AMD_ACP is not set
CONFIG_SND_AMD_ACP_CONFIG=y
CONFIG_SND_ATMEL_SOC=y
CONFIG_SND_ATMEL_SOC_PDC=y
CONFIG_SND_ATMEL_SOC_DMA=y
CONFIG_SND_ATMEL_SOC_SSC=y
CONFIG_SND_ATMEL_SOC_SSC_PDC=y
CONFIG_SND_ATMEL_SOC_SSC_DMA=y
CONFIG_SND_AT91_SOC_SAM9G20_WM8731=y
CONFIG_SND_ATMEL_SOC_WM8904=y
# CONFIG_SND_AT91_SOC_SAM9X5_WM8731 is not set
CONFIG_SND_ATMEL_SOC_CLASSD=y
CONFIG_SND_ATMEL_SOC_PDMIC=y
# CONFIG_SND_ATMEL_SOC_I2S is not set
# CONFIG_SND_SOC_MIKROE_PROTO is not set
CONFIG_SND_MCHP_SOC_I2S_MCC=y
CONFIG_SND_MCHP_SOC_SPDIFTX=y
CONFIG_SND_MCHP_SOC_SPDIFRX=y
CONFIG_SND_MCHP_SOC_PDMC=y
CONFIG_SND_BCM2835_SOC_I2S=y
CONFIG_SND_SOC_CYGNUS=y
# CONFIG_SND_BCM63XX_I2S_WHISTLER is not set
CONFIG_SND_EP93XX_SOC=y
CONFIG_SND_DESIGNWARE_I2S=y
# CONFIG_SND_DESIGNWARE_PCM is not set
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=y
CONFIG_SND_SOC_FSL_SAI=y
# CONFIG_SND_SOC_FSL_MQS is not set
CONFIG_SND_SOC_FSL_AUDMIX=y
# CONFIG_SND_SOC_FSL_SSI is not set
CONFIG_SND_SOC_FSL_SPDIF=y
CONFIG_SND_SOC_FSL_ESAI=y
CONFIG_SND_SOC_FSL_MICFIL=y
# CONFIG_SND_SOC_FSL_EASRC is not set
CONFIG_SND_SOC_FSL_XCVR=y
CONFIG_SND_SOC_FSL_AUD2HTX=y
CONFIG_SND_SOC_FSL_UTILS=y
# CONFIG_SND_SOC_FSL_RPMSG is not set
CONFIG_SND_SOC_IMX_AUDMUX=y
# CONFIG_SND_IMX_SOC is not set
# end of SoC Audio for Freescale CPUs
# CONFIG_SND_I2S_HI6210_I2S is not set
# CONFIG_SND_JZ4740_SOC_I2S is not set
CONFIG_SND_KIRKWOOD_SOC=y
CONFIG_SND_KIRKWOOD_SOC_ARMADA370_DB=y
CONFIG_SND_SOC_IMG=y
# CONFIG_SND_SOC_IMG_I2S_IN is not set
CONFIG_SND_SOC_IMG_I2S_OUT=y
CONFIG_SND_SOC_IMG_PARALLEL_OUT=y
# CONFIG_SND_SOC_IMG_SPDIF_IN is not set
CONFIG_SND_SOC_IMG_SPDIF_OUT=y
# CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC is not set
# CONFIG_SND_SOC_INTEL_SST_TOPLEVEL is not set
CONFIG_SND_SOC_INTEL_KEEMBAY=y
CONFIG_SND_SOC_MEDIATEK=y
# CONFIG_SND_SOC_MT8186 is not set
# CONFIG_SND_SOC_MTK_BTCVSD is not set
CONFIG_SND_SOC_MT8195=y
CONFIG_SND_SOC_MT8195_MT6359=y
#
# ASoC support for Amlogic platforms
#
# CONFIG_SND_MESON_AIU is not set
# CONFIG_SND_MESON_AXG_FRDDR is not set
# CONFIG_SND_MESON_AXG_TODDR is not set
CONFIG_SND_MESON_AXG_TDM_FORMATTER=y
CONFIG_SND_MESON_AXG_TDM_INTERFACE=y
CONFIG_SND_MESON_AXG_TDMIN=y
# CONFIG_SND_MESON_AXG_TDMOUT is not set
CONFIG_SND_MESON_AXG_SOUND_CARD=y
CONFIG_SND_MESON_AXG_SPDIFOUT=y
# CONFIG_SND_MESON_AXG_SPDIFIN is not set
CONFIG_SND_MESON_AXG_PDM=y
CONFIG_SND_MESON_CARD_UTILS=y
CONFIG_SND_MESON_CODEC_GLUE=y
# CONFIG_SND_MESON_GX_SOUND_CARD is not set
CONFIG_SND_MESON_G12A_TOACODEC=y
CONFIG_SND_MESON_G12A_TOHDMITX=y
# CONFIG_SND_SOC_MESON_T9015 is not set
# end of ASoC support for Amlogic platforms
CONFIG_SND_MXS_SOC=y
CONFIG_SND_SOC_MXS_SGTL5000=y
# CONFIG_SND_PXA2XX_SOC is not set
CONFIG_SND_SOC_QCOM=y
CONFIG_SND_SOC_LPASS_CPU=y
CONFIG_SND_SOC_LPASS_HDMI=y
CONFIG_SND_SOC_LPASS_PLATFORM=y
CONFIG_SND_SOC_LPASS_APQ8016=y
CONFIG_SND_SOC_LPASS_SC7180=y
# CONFIG_SND_SOC_STORM is not set
CONFIG_SND_SOC_APQ8016_SBC=y
CONFIG_SND_SOC_QCOM_COMMON=y
CONFIG_SND_SOC_SC7180=y
CONFIG_SND_SOC_ROCKCHIP=y
CONFIG_SND_SOC_ROCKCHIP_I2S=y
# CONFIG_SND_SOC_ROCKCHIP_I2S_TDM is not set
CONFIG_SND_SOC_ROCKCHIP_PDM=y
CONFIG_SND_SOC_ROCKCHIP_SPDIF=y
CONFIG_SND_SOC_ROCKCHIP_MAX98090=y
CONFIG_SND_SOC_ROCKCHIP_RT5645=y
# CONFIG_SND_SOC_RK3288_HDMI_ANALOG is not set
CONFIG_SND_SOC_SAMSUNG=y
CONFIG_SND_S3C24XX_I2S=y
CONFIG_SND_SAMSUNG_PCM=y
# CONFIG_SND_SAMSUNG_SPDIF is not set
CONFIG_SND_SAMSUNG_I2S=y
# CONFIG_SND_SOC_SAMSUNG_NEO1973_WM8753 is not set
# CONFIG_SND_SOC_SAMSUNG_SMDK_WM8580 is not set
CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=y
CONFIG_SND_SOC_SAMSUNG_S3C24XX_UDA134X=y
CONFIG_SND_SOC_SAMSUNG_SIMTEC=y
CONFIG_SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23=y
CONFIG_SND_SOC_SAMSUNG_SIMTEC_HERMES=y
CONFIG_SND_SOC_SAMSUNG_H1940_UDA1380=y
# CONFIG_SND_SOC_SAMSUNG_RX1950_UDA1380 is not set
CONFIG_SND_SOC_SMARTQ=y
# CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF is not set
# CONFIG_SND_SOC_SMDK_WM8994_PCM is not set
CONFIG_SND_SOC_TOBERMORY=y
CONFIG_SND_SOC_LOWLAND=y
CONFIG_SND_SOC_LITTLEMILL=y
CONFIG_SND_SOC_SNOW=y
CONFIG_SND_SOC_ODROID=y
# CONFIG_SND_SOC_ARNDALE is not set
# CONFIG_SND_SOC_SAMSUNG_ARIES_WM8994 is not set
CONFIG_SND_SOC_SAMSUNG_MIDAS_WM1811=y
#
# SoC Audio support for Renesas SoCs
#
CONFIG_SND_SOC_SH4_FSI=y
CONFIG_SND_SOC_RCAR=y
# CONFIG_SND_SOC_RZ is not set
# end of SoC Audio support for Renesas SoCs
# CONFIG_SND_SOC_SOF_TOPLEVEL is not set
# CONFIG_SND_SOC_SPRD is not set
CONFIG_SND_SOC_STI=y
#
# STMicroelectronics STM32 SOC audio support
#
CONFIG_SND_SOC_STM32_SAI=y
CONFIG_SND_SOC_STM32_I2S=y
CONFIG_SND_SOC_STM32_SPDIFRX=y
# end of STMicroelectronics STM32 SOC audio support
#
# Allwinner SoC Audio support
#
# CONFIG_SND_SUN4I_CODEC is not set
CONFIG_SND_SUN8I_CODEC=y
CONFIG_SND_SUN8I_CODEC_ANALOG=y
CONFIG_SND_SUN50I_CODEC_ANALOG=y
# CONFIG_SND_SUN4I_I2S is not set
CONFIG_SND_SUN4I_SPDIF=y
CONFIG_SND_SUN8I_ADDA_PR_REGMAP=y
# end of Allwinner SoC Audio support
# CONFIG_SND_SOC_TEGRA is not set
#
# Audio support for Texas Instruments SoCs
#
CONFIG_SND_SOC_TI_EDMA_PCM=y
CONFIG_SND_SOC_TI_SDMA_PCM=y
#
# Texas Instruments DAI support for:
#
CONFIG_SND_SOC_DAVINCI_ASP=y
# CONFIG_SND_SOC_DAVINCI_MCASP is not set
CONFIG_SND_SOC_DAVINCI_VCIF=y
# CONFIG_SND_SOC_OMAP_DMIC is not set
CONFIG_SND_SOC_OMAP_MCBSP=y
CONFIG_SND_SOC_OMAP_MCPDM=y
#
# Audio support for boards with Texas Instruments SoCs
#
# CONFIG_SND_SOC_OMAP_ABE_TWL6040 is not set
# CONFIG_SND_SOC_OMAP_HDMI is not set
# CONFIG_SND_SOC_J721E_EVM is not set
# end of Audio support for Texas Instruments SoCs
# CONFIG_SND_SOC_UNIPHIER is not set
CONFIG_SND_SOC_XILINX_I2S=y
CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=y
CONFIG_SND_SOC_XILINX_SPDIF=y
CONFIG_SND_SOC_XTFPGA_I2S=y
CONFIG_SND_SOC_I2C_AND_SPI=y
#
# CODEC drivers
#
# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_WM_HUBS=y
CONFIG_SND_SOC_WM_ADSP=y
CONFIG_SND_SOC_AC97_CODEC=y
CONFIG_SND_SOC_ADAU_UTILS=y
CONFIG_SND_SOC_ADAU1372=y
CONFIG_SND_SOC_ADAU1372_I2C=y
CONFIG_SND_SOC_ADAU1701=y
# CONFIG_SND_SOC_ADAU1761_I2C is not set
CONFIG_SND_SOC_ADAU7002=y
CONFIG_SND_SOC_ADAU7118=y
CONFIG_SND_SOC_ADAU7118_HW=y
CONFIG_SND_SOC_ADAU7118_I2C=y
# CONFIG_SND_SOC_AK4118 is not set
CONFIG_SND_SOC_AK4375=y
# CONFIG_SND_SOC_AK4458 is not set
# CONFIG_SND_SOC_AK4554 is not set
CONFIG_SND_SOC_AK4613=y
# CONFIG_SND_SOC_AK4642 is not set
CONFIG_SND_SOC_AK5386=y
CONFIG_SND_SOC_AK5558=y
CONFIG_SND_SOC_ALC5623=y
CONFIG_SND_SOC_AW8738=y
CONFIG_SND_SOC_BD28623=y
# CONFIG_SND_SOC_BT_SCO is not set
CONFIG_SND_SOC_CROS_EC_CODEC=y
CONFIG_SND_SOC_CS35L32=y
# CONFIG_SND_SOC_CS35L33 is not set
# CONFIG_SND_SOC_CS35L34 is not set
CONFIG_SND_SOC_CS35L35=y
# CONFIG_SND_SOC_CS35L36 is not set
CONFIG_SND_SOC_CS35L41_LIB=y
CONFIG_SND_SOC_CS35L41=y
CONFIG_SND_SOC_CS35L41_I2C=y
CONFIG_SND_SOC_CS35L45_TABLES=y
CONFIG_SND_SOC_CS35L45=y
CONFIG_SND_SOC_CS35L45_I2C=y
CONFIG_SND_SOC_CS42L42=y
CONFIG_SND_SOC_CS42L51=y
CONFIG_SND_SOC_CS42L51_I2C=y
CONFIG_SND_SOC_CS42L52=y
CONFIG_SND_SOC_CS42L56=y
CONFIG_SND_SOC_CS42L73=y
CONFIG_SND_SOC_CS4234=y
# CONFIG_SND_SOC_CS4265 is not set
# CONFIG_SND_SOC_CS4270 is not set
CONFIG_SND_SOC_CS4271=y
CONFIG_SND_SOC_CS4271_I2C=y
CONFIG_SND_SOC_CS42XX8=y
CONFIG_SND_SOC_CS42XX8_I2C=y
CONFIG_SND_SOC_CS43130=y
CONFIG_SND_SOC_CS4341=y
# CONFIG_SND_SOC_CS4349 is not set
# CONFIG_SND_SOC_CS53L30 is not set
CONFIG_SND_SOC_CX2072X=y
CONFIG_SND_SOC_JZ4740_CODEC=y
CONFIG_SND_SOC_JZ4725B_CODEC=y
CONFIG_SND_SOC_JZ4760_CODEC=y
# CONFIG_SND_SOC_JZ4770_CODEC is not set
CONFIG_SND_SOC_L3=y
# CONFIG_SND_SOC_DA7213 is not set
CONFIG_SND_SOC_DMIC=y
CONFIG_SND_SOC_HDMI_CODEC=y
# CONFIG_SND_SOC_ES7134 is not set
CONFIG_SND_SOC_ES7241=y
# CONFIG_SND_SOC_ES8316 is not set
# CONFIG_SND_SOC_ES8328_I2C is not set
# CONFIG_SND_SOC_GTM601 is not set
CONFIG_SND_SOC_HDA=y
# CONFIG_SND_SOC_ICS43432 is not set
# CONFIG_SND_SOC_INNO_RK3036 is not set
CONFIG_SND_SOC_MAX98088=y
CONFIG_SND_SOC_MAX98090=y
CONFIG_SND_SOC_MAX98095=y
CONFIG_SND_SOC_MAX98357A=y
# CONFIG_SND_SOC_MAX98504 is not set
# CONFIG_SND_SOC_MAX9867 is not set
# CONFIG_SND_SOC_MAX98927 is not set
# CONFIG_SND_SOC_MAX98520 is not set
# CONFIG_SND_SOC_MAX98373_I2C is not set
CONFIG_SND_SOC_MAX98390=y
# CONFIG_SND_SOC_MAX98396 is not set
CONFIG_SND_SOC_MAX9860=y
CONFIG_SND_SOC_MSM8916_WCD_ANALOG=y
CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=y
CONFIG_SND_SOC_PCM1681=y
CONFIG_SND_SOC_PCM1789=y
CONFIG_SND_SOC_PCM1789_I2C=y
# CONFIG_SND_SOC_PCM179X_I2C is not set
CONFIG_SND_SOC_PCM186X=y
CONFIG_SND_SOC_PCM186X_I2C=y
CONFIG_SND_SOC_PCM3060=y
CONFIG_SND_SOC_PCM3060_I2C=y
CONFIG_SND_SOC_PCM3168A=y
CONFIG_SND_SOC_PCM3168A_I2C=y
CONFIG_SND_SOC_PCM5102A=y
# CONFIG_SND_SOC_PCM512x_I2C is not set
# CONFIG_SND_SOC_RK3328 is not set
# CONFIG_SND_SOC_RK817 is not set
CONFIG_SND_SOC_RL6231=y
CONFIG_SND_SOC_RT1011=y
CONFIG_SND_SOC_RT1015P=y
# CONFIG_SND_SOC_RT5616 is not set
# CONFIG_SND_SOC_RT5631 is not set
# CONFIG_SND_SOC_RT5640 is not set
CONFIG_SND_SOC_RT5645=y
# CONFIG_SND_SOC_RT5659 is not set
CONFIG_SND_SOC_RT5682=y
CONFIG_SND_SOC_RT5682_I2C=y
CONFIG_SND_SOC_RT5682S=y
CONFIG_SND_SOC_RT9120=y
CONFIG_SND_SOC_SGTL5000=y
CONFIG_SND_SOC_SIGMADSP=y
CONFIG_SND_SOC_SIGMADSP_I2C=y
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=y
CONFIG_SND_SOC_SIMPLE_MUX=y
CONFIG_SND_SOC_SPDIF=y
# CONFIG_SND_SOC_SSM2305 is not set
CONFIG_SND_SOC_SSM2518=y
# CONFIG_SND_SOC_SSM2602_I2C is not set
# CONFIG_SND_SOC_SSM4567 is not set
CONFIG_SND_SOC_STA32X=y
CONFIG_SND_SOC_STA350=y
CONFIG_SND_SOC_STI_SAS=y
# CONFIG_SND_SOC_TAS2552 is not set
# CONFIG_SND_SOC_TAS2562 is not set
# CONFIG_SND_SOC_TAS2764 is not set
CONFIG_SND_SOC_TAS2770=y
CONFIG_SND_SOC_TAS2780=y
CONFIG_SND_SOC_TAS5086=y
# CONFIG_SND_SOC_TAS571X is not set
CONFIG_SND_SOC_TAS5720=y
# CONFIG_SND_SOC_TAS5805M is not set
CONFIG_SND_SOC_TAS6424=y
CONFIG_SND_SOC_TDA7419=y
CONFIG_SND_SOC_TFA9879=y
CONFIG_SND_SOC_TFA989X=y
CONFIG_SND_SOC_TLV320ADC3XXX=y
CONFIG_SND_SOC_TLV320AIC23=y
CONFIG_SND_SOC_TLV320AIC23_I2C=y
# CONFIG_SND_SOC_TLV320AIC31XX is not set
CONFIG_SND_SOC_TLV320AIC32X4=y
CONFIG_SND_SOC_TLV320AIC32X4_I2C=y
CONFIG_SND_SOC_TLV320AIC3X=y
# CONFIG_SND_SOC_TLV320AIC3X_I2C is not set
CONFIG_SND_SOC_TLV320ADCX140=y
CONFIG_SND_SOC_TS3A227E=y
CONFIG_SND_SOC_TSCS42XX=y
CONFIG_SND_SOC_TSCS454=y
# CONFIG_SND_SOC_UDA1334 is not set
CONFIG_SND_SOC_UDA134X=y
CONFIG_SND_SOC_UDA1380=y
# CONFIG_SND_SOC_WCD9335 is not set
CONFIG_SND_SOC_WCD_MBHC=y
CONFIG_SND_SOC_WCD934X=y
CONFIG_SND_SOC_WM5100=y
CONFIG_SND_SOC_WM8510=y
CONFIG_SND_SOC_WM8523=y
CONFIG_SND_SOC_WM8524=y
CONFIG_SND_SOC_WM8580=y
CONFIG_SND_SOC_WM8711=y
# CONFIG_SND_SOC_WM8728 is not set
CONFIG_SND_SOC_WM8731=y
CONFIG_SND_SOC_WM8731_I2C=y
CONFIG_SND_SOC_WM8737=y
CONFIG_SND_SOC_WM8741=y
CONFIG_SND_SOC_WM8750=y
CONFIG_SND_SOC_WM8753=y
CONFIG_SND_SOC_WM8776=y
# CONFIG_SND_SOC_WM8782 is not set
# CONFIG_SND_SOC_WM8804_I2C is not set
# CONFIG_SND_SOC_WM8903 is not set
CONFIG_SND_SOC_WM8904=y
# CONFIG_SND_SOC_WM8940 is not set
CONFIG_SND_SOC_WM8960=y
CONFIG_SND_SOC_WM8962=y
CONFIG_SND_SOC_WM8974=y
CONFIG_SND_SOC_WM8978=y
CONFIG_SND_SOC_WM8985=y
CONFIG_SND_SOC_WM8994=y
CONFIG_SND_SOC_WM9081=y
CONFIG_SND_SOC_MAX9759=y
CONFIG_SND_SOC_MT6351=y
CONFIG_SND_SOC_MT6358=y
CONFIG_SND_SOC_MT6359=y
CONFIG_SND_SOC_MT6359_ACCDET=y
CONFIG_SND_SOC_MT6660=y
CONFIG_SND_SOC_NAU8315=y
CONFIG_SND_SOC_NAU8540=y
# CONFIG_SND_SOC_NAU8810 is not set
CONFIG_SND_SOC_NAU8821=y
# CONFIG_SND_SOC_NAU8822 is not set
CONFIG_SND_SOC_NAU8824=y
CONFIG_SND_SOC_TPA6130A2=y
CONFIG_SND_SOC_LPASS_MACRO_COMMON=y
CONFIG_SND_SOC_LPASS_WSA_MACRO=y
# CONFIG_SND_SOC_LPASS_VA_MACRO is not set
# CONFIG_SND_SOC_LPASS_RX_MACRO is not set
CONFIG_SND_SOC_LPASS_TX_MACRO=y
# end of CODEC drivers
CONFIG_SND_SIMPLE_CARD_UTILS=y
CONFIG_SND_SIMPLE_CARD=y
CONFIG_SND_AUDIO_GRAPH_CARD=y
CONFIG_SND_AUDIO_GRAPH_CARD2=y
CONFIG_SND_AUDIO_GRAPH_CARD2_CUSTOM_SAMPLE=y
CONFIG_SND_TEST_COMPONENT=y
CONFIG_SND_VIRTIO=y
CONFIG_AC97_BUS=y
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set
CONFIG_UHID=y
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=y
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=y
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_COUGAR=y
CONFIG_HID_MACALLY=y
# CONFIG_HID_CMEDIA is not set
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELECOM=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GEMBIRD=y
CONFIG_HID_GFRM=y
CONFIG_HID_GLORIOUS=y
CONFIG_HID_VIVALDI_COMMON=y
CONFIG_HID_VIVALDI=y
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_WALTOP=y
CONFIG_HID_VIEWSONIC=y
CONFIG_HID_XIAOMI=y
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
CONFIG_HID_JABRA=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
CONFIG_HID_LED=y
CONFIG_HID_LENOVO=y
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MALTRON=y
CONFIG_HID_MAYFLASH=y
CONFIG_HID_REDRAGON=y
CONFIG_HID_MICROSOFT=y
# CONFIG_HID_MONTEREY is not set
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NINTENDO=y
CONFIG_NINTENDO_FF=y
# CONFIG_HID_NTI is not set
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PLAYSTATION=y
# CONFIG_PLAYSTATION_FF is not set
# CONFIG_HID_RAZER is not set
CONFIG_HID_PRIMAX=y
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SEMITEK=y
CONFIG_HID_SPEEDLINK=y
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=y
CONFIG_HID_TOPSEED=y
CONFIG_HID_THINGM=y
# CONFIG_HID_UDRAW_PS3 is not set
CONFIG_HID_WIIMOTE=y
CONFIG_HID_XINMO=y
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=y
# CONFIG_HID_ALPS is not set
# end of Special HID drivers
#
# I2C HID support
#
CONFIG_I2C_HID_OF=y
CONFIG_I2C_HID_OF_ELAN=y
CONFIG_I2C_HID_OF_GOODIX=y
# end of I2C HID support
CONFIG_I2C_HID_CORE=y
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
# CONFIG_MSPRO_BLOCK is not set
# CONFIG_MS_BLOCK is not set
#
# MemoryStick Host Controller Drivers
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
CONFIG_LEDS_CLASS_MULTICOLOR=y
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
CONFIG_LEDS_AN30259A=y
# CONFIG_LEDS_ARIEL is not set
CONFIG_LEDS_AW2013=y
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_TURRIS_OMNIA is not set
CONFIG_LEDS_LM3530=y
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3533 is not set
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_LM3692X=y
# CONFIG_LEDS_S3C24XX is not set
CONFIG_LEDS_COBALT_QUBE=y
CONFIG_LEDS_COBALT_RAQ=y
CONFIG_LEDS_SUNFIRE=y
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP3952=y
# CONFIG_LEDS_LP50XX is not set
CONFIG_LEDS_LP55XX_COMMON=y
# CONFIG_LEDS_LP5521 is not set
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
# CONFIG_LEDS_LP8501 is not set
CONFIG_LEDS_LP8788=y
CONFIG_LEDS_LP8860=y
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_PCA955X_GPIO is not set
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM831X_STATUS=y
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_ADP5520 is not set
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_NS2=y
CONFIG_LEDS_NETXBIG=y
CONFIG_LEDS_ASIC3=y
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX77650=y
CONFIG_LEDS_MAX8997=y
# CONFIG_LEDS_LM355x is not set
CONFIG_LEDS_OT200=y
CONFIG_LEDS_IS31FL319X=y
# CONFIG_LEDS_IS31FL32XX is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_SYSCON is not set
CONFIG_LEDS_MLXREG=y
# CONFIG_LEDS_USER is not set
CONFIG_LEDS_TI_LMU_COMMON=y
CONFIG_LEDS_LM3697=y
CONFIG_LEDS_IP30=y
# CONFIG_LEDS_BCM63138 is not set
CONFIG_LEDS_LGM=y
#
# Flash and Torch LED drivers
#
#
# RGB LED drivers
#
# CONFIG_LEDS_PWM_MULTICOLOR is not set
CONFIG_LEDS_QCOM_LPG=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_LEDS_TRIGGER_PANIC=y
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=y
CONFIG_LEDS_TRIGGER_TTY=y
#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# end of Speakup console speech
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_ABB5ZES3=y
CONFIG_RTC_DRV_ABEOZ9=y
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_BRCMSTB is not set
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1307_CENTURY=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1374_WDT=y
# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_HYM8563=y
# CONFIG_RTC_DRV_LP8788 is not set
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_MAX8907=y
# CONFIG_RTC_DRV_MAX8997 is not set
# CONFIG_RTC_DRV_MAX77686 is not set
CONFIG_RTC_DRV_NCT3018Y=y
CONFIG_RTC_DRV_RK808=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_ISL12022=y
CONFIG_RTC_DRV_ISL12026=y
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
CONFIG_RTC_DRV_PCF85063=y
CONFIG_RTC_DRV_PCF85363=y
# CONFIG_RTC_DRV_PCF8563 is not set
CONFIG_RTC_DRV_PCF8583=y
# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_BD70528=y
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_TPS65910=y
# CONFIG_RTC_DRV_RC5T619 is not set
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
CONFIG_RTC_DRV_RX8025=y
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_RV3028=y
CONFIG_RTC_DRV_RV3032=y
CONFIG_RTC_DRV_RV8803=y
CONFIG_RTC_DRV_S5M=y
# CONFIG_RTC_DRV_SD3078 is not set
#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
# CONFIG_RTC_DRV_DS3232_HWMON is not set
CONFIG_RTC_DRV_PCF2127=y
CONFIG_RTC_DRV_RV3029C2=y
# CONFIG_RTC_DRV_RV3029_HWMON is not set
CONFIG_RTC_DRV_RX6110=y
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1685_FAMILY=y
# CONFIG_RTC_DRV_DS1685 is not set
CONFIG_RTC_DRV_DS1689=y
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_DA9055=y
CONFIG_RTC_DRV_DA9063=y
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=y
# CONFIG_RTC_DRV_GAMECUBE is not set
CONFIG_RTC_DRV_WM831X=y
CONFIG_RTC_DRV_SC27XX=y
CONFIG_RTC_DRV_SPEAR=y
CONFIG_RTC_DRV_PCF50633=y
CONFIG_RTC_DRV_ZYNQMP=y
CONFIG_RTC_DRV_CROS_EC=y
CONFIG_RTC_DRV_NTXEC=y
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_ASM9260=y
CONFIG_RTC_DRV_DAVINCI=y
CONFIG_RTC_DRV_DIGICOLOR=y
CONFIG_RTC_DRV_FSL_FTM_ALARM=y
CONFIG_RTC_DRV_MESON=y
CONFIG_RTC_DRV_MESON_VRTC=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_RTC_DRV_S3C=y
# CONFIG_RTC_DRV_EP93XX is not set
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_RTC_DRV_AT91SAM9=y
# CONFIG_RTC_DRV_RZN1 is not set
# CONFIG_RTC_DRV_GENERIC is not set
CONFIG_RTC_DRV_VT8500=y
CONFIG_RTC_DRV_SUN4V=y
CONFIG_RTC_DRV_SUN6I=y
CONFIG_RTC_DRV_SUNXI=y
CONFIG_RTC_DRV_STARFIRE=y
CONFIG_RTC_DRV_MV=y
CONFIG_RTC_DRV_ARMADA38X=y
# CONFIG_RTC_DRV_CADENCE is not set
# CONFIG_RTC_DRV_FTRTC010 is not set
CONFIG_RTC_DRV_STMP=y
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_JZ4740=y
# CONFIG_RTC_DRV_LPC24XX is not set
CONFIG_RTC_DRV_LPC32XX=y
CONFIG_RTC_DRV_PM8XXX=y
CONFIG_RTC_DRV_TEGRA=y
CONFIG_RTC_DRV_MXC=y
CONFIG_RTC_DRV_MXC_V2=y
CONFIG_RTC_DRV_SNVS=y
# CONFIG_RTC_DRV_MOXART is not set
CONFIG_RTC_DRV_MT2712=y
CONFIG_RTC_DRV_MT6397=y
CONFIG_RTC_DRV_MT7622=y
# CONFIG_RTC_DRV_XGENE is not set
CONFIG_RTC_DRV_R7301=y
CONFIG_RTC_DRV_STM32=y
CONFIG_RTC_DRV_RTD119X=y
CONFIG_RTC_DRV_ASPEED=y
CONFIG_RTC_DRV_TI_K3=y
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
CONFIG_RTC_DRV_MSC313=y
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
# CONFIG_UDMABUF is not set
CONFIG_DMABUF_MOVE_NOTIFY=y
# CONFIG_DMABUF_DEBUG is not set
CONFIG_DMABUF_SELFTESTS=y
# CONFIG_DMABUF_HEAPS is not set
CONFIG_DMABUF_SYSFS_STATS=y
# end of DMABUF options
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_DMEM_GENIRQ=y
CONFIG_UIO_PRUSS=y
CONFIG_VFIO=y
CONFIG_VFIO_VIRQFD=y
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PLATFORM=y
CONFIG_VFIO_AMBA=y
# CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET is not set
# CONFIG_VFIO_PLATFORM_AMDXGBE_RESET is not set
CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET=y
CONFIG_VFIO_MDEV=y
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_INPUT is not set
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
CONFIG_VHOST_MENU=y
# CONFIG_VHOST_SCSI is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not set
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
# CONFIG_COMEDI_BOND is not set
# CONFIG_COMEDI_TEST is not set
CONFIG_COMEDI_PARPORT=y
CONFIG_COMEDI_SSV_DNP=y
# CONFIG_COMEDI_ISA_DRIVERS is not set
# CONFIG_COMEDI_8255_SA is not set
# CONFIG_COMEDI_KCOMEDILIB is not set
# CONFIG_COMEDI_TESTS is not set
CONFIG_STAGING=y
#
# IIO staging drivers
#
#
# Accelerometers
#
# end of Accelerometers
#
# Analog to digital converters
#
# end of Analog to digital converters
#
# Analog digital bi-direction converters
#
# CONFIG_ADT7316 is not set
# end of Analog digital bi-direction converters
#
# Capacitance to digital converters
#
CONFIG_AD7746=y
# end of Capacitance to digital converters
#
# Direct Digital Synthesis
#
# end of Direct Digital Synthesis
#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=y
# end of Network Analyzer, Impedance Converters
#
# Active energy metering IC
#
CONFIG_ADE7854=y
# CONFIG_ADE7854_I2C is not set
# end of Active energy metering IC
#
# Resolver to digital converters
#
# end of Resolver to digital converters
# end of IIO staging drivers
CONFIG_STAGING_MEDIA=y
# CONFIG_FIREWIRE_SERIAL is not set
CONFIG_COMMON_CLK_XLNX_CLKWZRD=y
CONFIG_BCM_VIDEOCORE=y
CONFIG_BCM2835_VCHIQ=y
CONFIG_VCHIQ_CDEV=y
CONFIG_SND_BCM2835=y
# CONFIG_BCM2835_VCHIQ_MMAL is not set
CONFIG_XIL_AXIS_FIFO=y
CONFIG_FIELDBUS_DEV=y
CONFIG_HMS_ANYBUSS_BUS=y
CONFIG_ARCX_ANYBUS_CONTROLLER=y
CONFIG_HMS_PROFINET=y
CONFIG_GOLDFISH=y
CONFIG_GOLDFISH_PIPE=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=y
CONFIG_CROS_EC_RPMSG=y
CONFIG_CROS_EC_PROTO=y
CONFIG_CROS_KBD_LED_BACKLIGHT=y
# CONFIG_CROS_EC_CHARDEV is not set
# CONFIG_CROS_EC_LIGHTBAR is not set
CONFIG_CROS_EC_VBC=y
# CONFIG_CROS_EC_DEBUGFS is not set
# CONFIG_CROS_EC_SENSORHUB is not set
CONFIG_CROS_EC_SYSFS=y
CONFIG_CROS_USBPD_NOTIFY=y
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_OLPC_XO175 is not set
CONFIG_SURFACE_PLATFORMS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_COMMON_CLK_WM831X is not set
#
# Clock driver for ARM Reference designs
#
CONFIG_CLK_ICST=y
# CONFIG_CLK_SP810 is not set
# end of Clock driver for ARM Reference designs
CONFIG_CLK_HSDK=y
# CONFIG_COMMON_CLK_APPLE_NCO is not set
CONFIG_COMMON_CLK_MAX77686=y
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_RK808 is not set
# CONFIG_COMMON_CLK_HI655X is not set
# CONFIG_COMMON_CLK_SCMI is not set
CONFIG_COMMON_CLK_SCPI=y
CONFIG_COMMON_CLK_SI5341=y
CONFIG_COMMON_CLK_SI5351=y
# CONFIG_COMMON_CLK_SI514 is not set
# CONFIG_COMMON_CLK_SI544 is not set
CONFIG_COMMON_CLK_SI570=y
# CONFIG_COMMON_CLK_BM1880 is not set
CONFIG_COMMON_CLK_CDCE706=y
# CONFIG_COMMON_CLK_TPS68470 is not set
CONFIG_COMMON_CLK_CDCE925=y
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_EN7523 is not set
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
# CONFIG_COMMON_CLK_FSL_SAI is not set
# CONFIG_COMMON_CLK_GEMINI is not set
CONFIG_COMMON_CLK_LAN966X=y
# CONFIG_COMMON_CLK_ASPEED is not set
CONFIG_COMMON_CLK_S2MPS11=y
CONFIG_CLK_TWL6040=y
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
CONFIG_CLK_QORIQ=y
# CONFIG_CLK_LS1028A_PLLDIG is not set
CONFIG_COMMON_CLK_XGENE=y
CONFIG_COMMON_CLK_PWM=y
# CONFIG_COMMON_CLK_OXNAS is not set
# CONFIG_COMMON_CLK_RS9_PCIE is not set
CONFIG_COMMON_CLK_VC5=y
CONFIG_COMMON_CLK_MMP2_AUDIO=y
CONFIG_COMMON_CLK_BD718XX=y
CONFIG_COMMON_CLK_FIXED_MMIO=y
CONFIG_CLK_ACTIONS=y
CONFIG_CLK_OWL_S500=y
CONFIG_CLK_OWL_S700=y
CONFIG_CLK_OWL_S900=y
CONFIG_CLK_ANALOGBITS_WRPLL_CLN28HPC=y
CONFIG_CLK_BAIKAL_T1=y
CONFIG_CLK_BT1_CCU_PLL=y
# CONFIG_CLK_BT1_CCU_DIV is not set
# CONFIG_CLK_BCM2711_DVP is not set
# CONFIG_CLK_BCM2835 is not set
CONFIG_CLK_BCM_63XX=y
CONFIG_CLK_BCM_63XX_GATE=y
# CONFIG_CLK_BCM_KONA is not set
CONFIG_COMMON_CLK_IPROC=y
CONFIG_CLK_BCM_CYGNUS=y
# CONFIG_CLK_BCM_HR2 is not set
CONFIG_CLK_BCM_NSP=y
CONFIG_CLK_BCM_NS2=y
# CONFIG_CLK_BCM_SR is not set
CONFIG_CLK_RASPBERRYPI=y
CONFIG_COMMON_CLK_HI3516CV300=y
CONFIG_COMMON_CLK_HI3519=y
# CONFIG_COMMON_CLK_HI3559A is not set
# CONFIG_COMMON_CLK_HI3660 is not set
CONFIG_COMMON_CLK_HI3670=y
CONFIG_COMMON_CLK_HI3798CV200=y
# CONFIG_COMMON_CLK_HI6220 is not set
CONFIG_RESET_HISI=y
# CONFIG_STUB_CLK_HI6220 is not set
CONFIG_STUB_CLK_HI3660=y
CONFIG_COMMON_CLK_BOSTON=y
CONFIG_MXC_CLK=y
CONFIG_CLK_IMX8MM=y
# CONFIG_CLK_IMX8MN is not set
# CONFIG_CLK_IMX8MP is not set
CONFIG_CLK_IMX8MQ=y
# CONFIG_CLK_IMX8ULP is not set
CONFIG_CLK_IMX93=y
#
# Ingenic SoCs drivers
#
CONFIG_INGENIC_CGU_COMMON=y
CONFIG_INGENIC_CGU_JZ4740=y
CONFIG_INGENIC_CGU_JZ4725B=y
CONFIG_INGENIC_CGU_JZ4760=y
# CONFIG_INGENIC_CGU_JZ4770 is not set
CONFIG_INGENIC_CGU_JZ4780=y
# CONFIG_INGENIC_CGU_X1000 is not set
CONFIG_INGENIC_CGU_X1830=y
CONFIG_INGENIC_TCU_CLK=y
# end of Ingenic SoCs drivers
CONFIG_COMMON_CLK_KEYSTONE=y
CONFIG_TI_SYSCON_CLK=y
#
# Clock driver for MediaTek SoC
#
CONFIG_COMMON_CLK_MEDIATEK=y
CONFIG_COMMON_CLK_MT2701=y
# CONFIG_COMMON_CLK_MT2701_MMSYS is not set
CONFIG_COMMON_CLK_MT2701_IMGSYS=y
CONFIG_COMMON_CLK_MT2701_VDECSYS=y
CONFIG_COMMON_CLK_MT2701_HIFSYS=y
CONFIG_COMMON_CLK_MT2701_ETHSYS=y
# CONFIG_COMMON_CLK_MT2701_BDPSYS is not set
# CONFIG_COMMON_CLK_MT2701_AUDSYS is not set
# CONFIG_COMMON_CLK_MT2701_G3DSYS is not set
CONFIG_COMMON_CLK_MT2712=y
CONFIG_COMMON_CLK_MT2712_BDPSYS=y
# CONFIG_COMMON_CLK_MT2712_IMGSYS is not set
# CONFIG_COMMON_CLK_MT2712_JPGDECSYS is not set
CONFIG_COMMON_CLK_MT2712_MFGCFG=y
CONFIG_COMMON_CLK_MT2712_MMSYS=y
# CONFIG_COMMON_CLK_MT2712_VDECSYS is not set
# CONFIG_COMMON_CLK_MT2712_VENCSYS is not set
CONFIG_COMMON_CLK_MT6765=y
# CONFIG_COMMON_CLK_MT6765_AUDIOSYS is not set
# CONFIG_COMMON_CLK_MT6765_CAMSYS is not set
# CONFIG_COMMON_CLK_MT6765_GCESYS is not set
CONFIG_COMMON_CLK_MT6765_MMSYS=y
CONFIG_COMMON_CLK_MT6765_IMGSYS=y
CONFIG_COMMON_CLK_MT6765_VCODECSYS=y
CONFIG_COMMON_CLK_MT6765_MFGSYS=y
CONFIG_COMMON_CLK_MT6765_MIPI0ASYS=y
# CONFIG_COMMON_CLK_MT6765_MIPI0BSYS is not set
CONFIG_COMMON_CLK_MT6765_MIPI1ASYS=y
CONFIG_COMMON_CLK_MT6765_MIPI1BSYS=y
CONFIG_COMMON_CLK_MT6765_MIPI2ASYS=y
# CONFIG_COMMON_CLK_MT6765_MIPI2BSYS is not set
CONFIG_COMMON_CLK_MT6779=y
# CONFIG_COMMON_CLK_MT6779_MMSYS is not set
CONFIG_COMMON_CLK_MT6779_IMGSYS=y
# CONFIG_COMMON_CLK_MT6779_IPESYS is not set
CONFIG_COMMON_CLK_MT6779_CAMSYS=y
CONFIG_COMMON_CLK_MT6779_VDECSYS=y
CONFIG_COMMON_CLK_MT6779_VENCSYS=y
CONFIG_COMMON_CLK_MT6779_MFGCFG=y
CONFIG_COMMON_CLK_MT6779_AUDSYS=y
CONFIG_COMMON_CLK_MT6797=y
CONFIG_COMMON_CLK_MT6797_MMSYS=y
CONFIG_COMMON_CLK_MT6797_IMGSYS=y
CONFIG_COMMON_CLK_MT6797_VDECSYS=y
# CONFIG_COMMON_CLK_MT6797_VENCSYS is not set
# CONFIG_COMMON_CLK_MT7622 is not set
# CONFIG_COMMON_CLK_MT7629 is not set
CONFIG_COMMON_CLK_MT7986=y
CONFIG_COMMON_CLK_MT7986_ETHSYS=y
CONFIG_COMMON_CLK_MT8135=y
CONFIG_COMMON_CLK_MT8167=y
CONFIG_COMMON_CLK_MT8167_AUDSYS=y
CONFIG_COMMON_CLK_MT8167_IMGSYS=y
# CONFIG_COMMON_CLK_MT8167_MFGCFG is not set
# CONFIG_COMMON_CLK_MT8167_MMSYS is not set
# CONFIG_COMMON_CLK_MT8167_VDECSYS is not set
CONFIG_COMMON_CLK_MT8173=y
# CONFIG_COMMON_CLK_MT8173_MMSYS is not set
CONFIG_COMMON_CLK_MT8183=y
# CONFIG_COMMON_CLK_MT8183_AUDIOSYS is not set
CONFIG_COMMON_CLK_MT8183_CAMSYS=y
# CONFIG_COMMON_CLK_MT8183_IMGSYS is not set
# CONFIG_COMMON_CLK_MT8183_IPU_CORE0 is not set
CONFIG_COMMON_CLK_MT8183_IPU_CORE1=y
CONFIG_COMMON_CLK_MT8183_IPU_ADL=y
CONFIG_COMMON_CLK_MT8183_IPU_CONN=y
CONFIG_COMMON_CLK_MT8183_MFGCFG=y
# CONFIG_COMMON_CLK_MT8183_MMSYS is not set
CONFIG_COMMON_CLK_MT8183_VDECSYS=y
CONFIG_COMMON_CLK_MT8183_VENCSYS=y
CONFIG_COMMON_CLK_MT8186=y
# CONFIG_COMMON_CLK_MT8192 is not set
CONFIG_COMMON_CLK_MT8195=y
# CONFIG_COMMON_CLK_MT8516 is not set
# end of Clock driver for MediaTek SoC
#
# Clock support for Amlogic platforms
#
# CONFIG_COMMON_CLK_AXG_AUDIO is not set
# end of Clock support for Amlogic platforms
CONFIG_MSTAR_MSC313_MPLL=y
# CONFIG_MCHP_CLK_MPFS is not set
# CONFIG_COMMON_CLK_PISTACHIO is not set
# CONFIG_COMMON_CLK_QCOM is not set
CONFIG_CLK_MT7621=y
# CONFIG_CLK_RENESAS is not set
CONFIG_COMMON_CLK_SAMSUNG=y
# CONFIG_S3C64XX_COMMON_CLK is not set
# CONFIG_S5PV210_COMMON_CLK is not set
# CONFIG_EXYNOS_3250_COMMON_CLK is not set
CONFIG_EXYNOS_4_COMMON_CLK=y
# CONFIG_EXYNOS_5250_COMMON_CLK is not set
# CONFIG_EXYNOS_5260_COMMON_CLK is not set
CONFIG_EXYNOS_5410_COMMON_CLK=y
# CONFIG_EXYNOS_5420_COMMON_CLK is not set
CONFIG_EXYNOS_ARM64_COMMON_CLK=y
CONFIG_EXYNOS_AUDSS_CLK_CON=y
CONFIG_EXYNOS_CLKOUT=y
# CONFIG_S3C2410_COMMON_CLK is not set
# CONFIG_S3C2412_COMMON_CLK is not set
# CONFIG_S3C2443_COMMON_CLK is not set
# CONFIG_TESLA_FSD_COMMON_CLK is not set
CONFIG_CLK_SIFIVE=y
CONFIG_CLK_SIFIVE_PRCI=y
CONFIG_CLK_INTEL_SOCFPGA=y
# CONFIG_CLK_INTEL_SOCFPGA32 is not set
CONFIG_CLK_INTEL_SOCFPGA64=y
CONFIG_SPRD_COMMON_CLK=y
CONFIG_SPRD_SC9860_CLK=y
CONFIG_SPRD_SC9863A_CLK=y
# CONFIG_CLK_STARFIVE_JH7100 is not set
# CONFIG_CLK_SUNXI is not set
CONFIG_SUNXI_CCU=y
CONFIG_SUNIV_F1C100S_CCU=y
CONFIG_SUN20I_D1_CCU=y
CONFIG_SUN20I_D1_R_CCU=y
CONFIG_SUN50I_A64_CCU=y
CONFIG_SUN50I_A100_CCU=y
CONFIG_SUN50I_A100_R_CCU=y
# CONFIG_SUN50I_H6_CCU is not set
CONFIG_SUN50I_H616_CCU=y
CONFIG_SUN50I_H6_R_CCU=y
CONFIG_SUN4I_A10_CCU=y
CONFIG_SUN5I_CCU=y
CONFIG_SUN6I_A31_CCU=y
# CONFIG_SUN6I_RTC_CCU is not set
# CONFIG_SUN8I_A23_CCU is not set
# CONFIG_SUN8I_A33_CCU is not set
CONFIG_SUN8I_A83T_CCU=y
CONFIG_SUN8I_H3_CCU=y
CONFIG_SUN8I_V3S_CCU=y
CONFIG_SUN8I_DE2_CCU=y
CONFIG_SUN8I_R40_CCU=y
# CONFIG_SUN9I_A80_CCU is not set
CONFIG_SUN8I_R_CCU=y
CONFIG_COMMON_CLK_TI_ADPLL=y
CONFIG_CLK_UNIPHIER=y
CONFIG_COMMON_CLK_VISCONTI=y
CONFIG_CLK_LGM_CGU=y
CONFIG_XILINX_VCU=y
# CONFIG_COMMON_CLK_ZYNQMP is not set
CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_OMAP=y
# CONFIG_HWSPINLOCK_QCOM is not set
CONFIG_HWSPINLOCK_SPRD=y
# CONFIG_HWSPINLOCK_STM32 is not set
CONFIG_HWSPINLOCK_SUN6I=y
CONFIG_HSEM_U8500=y
#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
# CONFIG_BCM2835_TIMER is not set
# CONFIG_BCM_KONA_TIMER is not set
CONFIG_DAVINCI_TIMER=y
CONFIG_DIGICOLOR_TIMER=y
# CONFIG_OMAP_DM_TIMER is not set
# CONFIG_DW_APB_TIMER is not set
# CONFIG_FTTMR010_TIMER is not set
CONFIG_IXP4XX_TIMER=y
# CONFIG_MESON6_TIMER is not set
CONFIG_OWL_TIMER=y
CONFIG_RDA_TIMER=y
CONFIG_SUN4I_TIMER=y
CONFIG_SUN5I_HSTIMER=y
# CONFIG_TEGRA_TIMER is not set
# CONFIG_TEGRA186_TIMER is not set
# CONFIG_VT8500_TIMER is not set
# CONFIG_NPCM7XX_TIMER is not set
# CONFIG_CADENCE_TTC_TIMER is not set
CONFIG_ASM9260_TIMER=y
# CONFIG_CLKSRC_DBX500_PRCMU is not set
# CONFIG_CLPS711X_TIMER is not set
# CONFIG_MXS_TIMER is not set
# CONFIG_NSPIRE_TIMER is not set
CONFIG_INTEGRATOR_AP_TIMER=y
CONFIG_CLKSRC_PISTACHIO=y
CONFIG_CLKSRC_STM32_LP=y
# CONFIG_ARMV7M_SYSTICK is not set
# CONFIG_ATMEL_PIT is not set
CONFIG_ATMEL_ST=y
# CONFIG_CLKSRC_SAMSUNG_PWM is not set
CONFIG_FSL_FTM_TIMER=y
# CONFIG_OXNAS_RPS_TIMER is not set
CONFIG_MTK_TIMER=y
CONFIG_SPRD_TIMER=y
# CONFIG_CLKSRC_JCORE_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
CONFIG_SH_TIMER_MTU2=y
# CONFIG_RENESAS_OSTM is not set
# CONFIG_SH_TIMER_TMU is not set
CONFIG_EM_TIMER_STI=y
# CONFIG_CLKSRC_PXA is not set
CONFIG_TIMER_IMX_SYS_CTR=y
# CONFIG_CLKSRC_ST_LPC is not set
CONFIG_GXP_TIMER=y
CONFIG_MSC313E_TIMER=y
CONFIG_INGENIC_TIMER=y
# CONFIG_INGENIC_SYSOST is not set
CONFIG_INGENIC_OST=y
CONFIG_MICROCHIP_PIT64B=y
# end of Clock Source drivers
CONFIG_MAILBOX=y
CONFIG_IMX_MBOX=y
# CONFIG_PLATFORM_MHU is not set
CONFIG_ARMADA_37XX_RWTM_MBOX=y
# CONFIG_ROCKCHIP_MBOX is not set
CONFIG_ALTERA_MBOX=y
CONFIG_HI3660_MBOX=y
# CONFIG_HI6220_MBOX is not set
# CONFIG_MAILBOX_TEST is not set
CONFIG_POLARFIRE_SOC_MAILBOX=y
# CONFIG_QCOM_APCS_IPC is not set
CONFIG_BCM_PDC_MBOX=y
# CONFIG_STM32_IPCC is not set
CONFIG_MTK_ADSP_MBOX=y
CONFIG_MTK_CMDQ_MBOX=y
CONFIG_SUN6I_MSGBOX=y
CONFIG_SPRD_MBOX=y
# CONFIG_QCOM_IPCC is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
CONFIG_IOMMU_IO_PGTABLE_LPAE=y
# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# end of Generic IOMMU Pagetable Support
CONFIG_IOMMU_DEBUGFS=y
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y
CONFIG_OF_IOMMU=y
CONFIG_OMAP_IOMMU=y
CONFIG_OMAP_IOMMU_DEBUG=y
# CONFIG_ROCKCHIP_IOMMU is not set
# CONFIG_SUN50I_IOMMU is not set
# CONFIG_IPMMU_VMSA is not set
CONFIG_APPLE_DART=y
# CONFIG_ARM_SMMU is not set
# CONFIG_S390_CCW_IOMMU is not set
CONFIG_S390_AP_IOMMU=y
# CONFIG_MTK_IOMMU is not set
CONFIG_QCOM_IOMMU=y
CONFIG_SPRD_IOMMU=y
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
# CONFIG_REMOTEPROC_CDEV is not set
CONFIG_INGENIC_VPU_RPROC=y
CONFIG_MTK_SCP=y
CONFIG_MESON_MX_AO_ARC_REMOTEPROC=y
CONFIG_RCAR_REMOTEPROC=y
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CTRL=y
CONFIG_RPMSG_NS=y
CONFIG_RPMSG_MTK_SCP=y
CONFIG_RPMSG_QCOM_GLINK=y
CONFIG_RPMSG_QCOM_GLINK_RPM=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
CONFIG_MESON_CANVAS=y
CONFIG_MESON_CLK_MEASURE=y
CONFIG_MESON_GX_SOCINFO=y
CONFIG_MESON_MX_SOCINFO=y
# end of Amlogic SoC drivers
#
# Apple SoC drivers
#
CONFIG_APPLE_RTKIT=y
CONFIG_APPLE_SART=y
# end of Apple SoC drivers
#
# ASPEED SoC drivers
#
CONFIG_ASPEED_LPC_CTRL=y
CONFIG_ASPEED_LPC_SNOOP=y
CONFIG_ASPEED_UART_ROUTING=y
CONFIG_ASPEED_P2A_CTRL=y
CONFIG_ASPEED_SOCINFO=y
# end of ASPEED SoC drivers
# CONFIG_AT91_SOC_ID is not set
CONFIG_AT91_SOC_SFR=y
#
# Broadcom SoC drivers
#
CONFIG_BCM2835_POWER=y
# CONFIG_SOC_BCM63XX is not set
CONFIG_SOC_BRCMSTB=y
CONFIG_BCM_PMB=y
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
# CONFIG_DPAA2_CONSOLE is not set
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# CONFIG_SOC_IMX8M is not set
# end of i.MX SoC drivers
#
# IXP4xx SoC drivers
#
CONFIG_IXP4XX_QMGR=y
CONFIG_IXP4XX_NPE=y
# end of IXP4xx SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
CONFIG_LITEX=y
CONFIG_LITEX_SOC_CONTROLLER=y
# end of Enable LiteX SoC Builder specific drivers
#
# MediaTek SoC drivers
#
CONFIG_MTK_CMDQ=y
CONFIG_MTK_DEVAPC=y
CONFIG_MTK_INFRACFG=y
CONFIG_MTK_PMIC_WRAP=y
CONFIG_MTK_SCPSYS=y
CONFIG_MTK_MMSYS=y
# end of MediaTek SoC drivers
CONFIG_POLARFIRE_SOC_SYS_CTRL=y
#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_COMMAND_DB is not set
CONFIG_QCOM_GENI_SE=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_LLCC=y
CONFIG_QCOM_RPMH=y
# CONFIG_QCOM_SMEM is not set
CONFIG_QCOM_SMD_RPM=y
# CONFIG_QCOM_SPM is not set
CONFIG_QCOM_WCNSS_CTRL=y
CONFIG_QCOM_ICC_BWMON=y
# end of Qualcomm SoC drivers
# CONFIG_SOC_RENESAS is not set
CONFIG_ROCKCHIP_GRF=y
# CONFIG_ROCKCHIP_IODOMAIN is not set
CONFIG_SOC_SAMSUNG=y
CONFIG_EXYNOS_ASV_ARM=y
CONFIG_EXYNOS_CHIPID=y
CONFIG_EXYNOS_USI=y
# CONFIG_EXYNOS_PM_DOMAINS is not set
# CONFIG_EXYNOS_REGULATOR_COUPLER is not set
CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER=y
CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER=y
CONFIG_SOC_TI=y
# CONFIG_UX500_SOC_ID is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#
# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set
CONFIG_ARM_IMX_BUS_DEVFREQ=y
# CONFIG_ARM_TEGRA_DEVFREQ is not set
CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=y
# CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
# CONFIG_EXTCON_ADC_JACK is not set
# CONFIG_EXTCON_FSA9480 is not set
CONFIG_EXTCON_GPIO=y
# CONFIG_EXTCON_MAX14577 is not set
# CONFIG_EXTCON_MAX3355 is not set
CONFIG_EXTCON_MAX77693=y
CONFIG_EXTCON_MAX77843=y
CONFIG_EXTCON_MAX8997=y
# CONFIG_EXTCON_PTN5150 is not set
CONFIG_EXTCON_QCOM_SPMI_MISC=y
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
# CONFIG_EXTCON_USB_GPIO is not set
CONFIG_EXTCON_USBC_CROS_EC=y
# CONFIG_EXTCON_USBC_TUSB320 is not set
CONFIG_MEMORY=y
CONFIG_DDR=y
CONFIG_ATMEL_SDRAMC=y
CONFIG_ATMEL_EBI=y
CONFIG_BRCMSTB_DPFE=y
# CONFIG_BT1_L2_CTL is not set
CONFIG_TI_AEMIF=y
# CONFIG_TI_EMIF is not set
CONFIG_MVEBU_DEVBUS=y
CONFIG_FSL_CORENET_CF=y
CONFIG_FSL_IFC=y
CONFIG_JZ4780_NEMC=y
CONFIG_MTK_SMI=y
CONFIG_DA8XX_DDRCTL=y
CONFIG_RENESAS_RPCIF=y
CONFIG_STM32_FMC2_EBI=y
CONFIG_SAMSUNG_MC=y
CONFIG_EXYNOS_SROM=y
CONFIG_TEGRA_MC=y
CONFIG_TEGRA20_EMC=y
CONFIG_TEGRA30_EMC=y
# CONFIG_TEGRA124_EMC is not set
CONFIG_TEGRA210_EMC_TABLE=y
CONFIG_TEGRA210_EMC=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_DMA=y
CONFIG_IIO_BUFFER_DMAENGINE=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
# CONFIG_IIO_CONFIGFS is not set
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
# CONFIG_IIO_SW_DEVICE is not set
# CONFIG_IIO_SW_TRIGGER is not set
CONFIG_IIO_TRIGGERED_EVENT=y
#
# Accelerometers
#
CONFIG_ADXL313=y
CONFIG_ADXL313_I2C=y
CONFIG_ADXL355=y
CONFIG_ADXL355_I2C=y
# CONFIG_ADXL367_I2C is not set
CONFIG_ADXL372=y
CONFIG_ADXL372_I2C=y
CONFIG_BMA400=y
CONFIG_BMA400_I2C=y
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
CONFIG_DA280=y
CONFIG_DA311=y
# CONFIG_DMARD06 is not set
CONFIG_DMARD09=y
CONFIG_DMARD10=y
# CONFIG_FXLS8962AF_I2C is not set
# CONFIG_HID_SENSOR_ACCEL_3D is not set
CONFIG_KXSD9=y
CONFIG_KXSD9_I2C=y
CONFIG_KXCJK1013=y
# CONFIG_MC3230 is not set
CONFIG_MMA7455=y
CONFIG_MMA7455_I2C=y
# CONFIG_MMA7660 is not set
# CONFIG_MMA8452 is not set
CONFIG_MMA9551_CORE=y
CONFIG_MMA9551=y
CONFIG_MMA9553=y
CONFIG_MXC4005=y
CONFIG_MXC6255=y
CONFIG_STK8312=y
CONFIG_STK8BA50=y
# end of Accelerometers
#
# Analog to digital converters
#
# CONFIG_AD7091R5 is not set
CONFIG_AD7291=y
CONFIG_AD7606=y
CONFIG_AD7606_IFACE_PARALLEL=y
CONFIG_AD799X=y
CONFIG_ADI_AXI_ADC=y
CONFIG_ASPEED_ADC=y
CONFIG_AT91_ADC=y
CONFIG_AT91_SAMA5D2_ADC=y
CONFIG_AXP20X_ADC=y
CONFIG_AXP288_ADC=y
# CONFIG_BCM_IPROC_ADC is not set
CONFIG_BERLIN2_ADC=y
CONFIG_CC10001_ADC=y
# CONFIG_DA9150_GPADC is not set
# CONFIG_ENVELOPE_DETECTOR is not set
CONFIG_EXYNOS_ADC=y
CONFIG_MXS_LRADC_ADC=y
CONFIG_HX711=y
# CONFIG_INGENIC_ADC is not set
# CONFIG_IMX7D_ADC is not set
CONFIG_IMX8QXP_ADC=y
CONFIG_LP8788_ADC=y
CONFIG_LPC18XX_ADC=y
CONFIG_LPC32XX_ADC=y
# CONFIG_LTC2471 is not set
CONFIG_LTC2485=y
# CONFIG_LTC2497 is not set
CONFIG_MAX1363=y
CONFIG_MAX9611=y
CONFIG_MCP3422=y
# CONFIG_MEDIATEK_MT6360_ADC is not set
# CONFIG_MEDIATEK_MT6577_AUXADC is not set
# CONFIG_MEN_Z188_ADC is not set
CONFIG_MESON_SARADC=y
CONFIG_NAU7802=y
# CONFIG_NPCM_ADC is not set
CONFIG_QCOM_VADC_COMMON=y
CONFIG_QCOM_SPMI_RRADC=y
CONFIG_QCOM_SPMI_IADC=y
CONFIG_QCOM_SPMI_VADC=y
CONFIG_QCOM_SPMI_ADC5=y
# CONFIG_RCAR_GYRO_ADC is not set
CONFIG_RN5T618_ADC=y
CONFIG_ROCKCHIP_SARADC=y
CONFIG_RZG2L_ADC=y
CONFIG_SC27XX_ADC=y
# CONFIG_SPEAR_ADC is not set
CONFIG_SD_ADC_MODULATOR=y
CONFIG_STM32_ADC_CORE=y
CONFIG_STM32_ADC=y
CONFIG_STM32_DFSDM_CORE=y
# CONFIG_STM32_DFSDM_ADC is not set
# CONFIG_SUN4I_GPADC is not set
# CONFIG_TI_ADC081C is not set
CONFIG_TI_ADS1015=y
CONFIG_TI_AM335X_ADC=y
# CONFIG_VF610_ADC is not set
CONFIG_XILINX_XADC=y
CONFIG_XILINX_AMS=y
# end of Analog to digital converters
#
# Analog to digital and digital to analog converters
#
# end of Analog to digital and digital to analog converters
#
# Analog Front Ends
#
CONFIG_IIO_RESCALE=y
# end of Analog Front Ends
#
# Amplifiers
#
# CONFIG_HMC425 is not set
# end of Amplifiers
#
# Capacitance to digital converters
#
CONFIG_AD7150=y
# end of Capacitance to digital converters
#
# Chemical Sensors
#
# CONFIG_ATLAS_PH_SENSOR is not set
CONFIG_ATLAS_EZO_SENSOR=y
CONFIG_BME680=y
CONFIG_BME680_I2C=y
CONFIG_CCS811=y
CONFIG_IAQCORE=y
# CONFIG_PMS7003 is not set
# CONFIG_SCD30_CORE is not set
CONFIG_SCD4X=y
# CONFIG_SENSIRION_SGP30 is not set
# CONFIG_SENSIRION_SGP40 is not set
# CONFIG_SPS30_I2C is not set
# CONFIG_SPS30_SERIAL is not set
CONFIG_SENSEAIR_SUNRISE_CO2=y
CONFIG_VZ89X=y
# end of Chemical Sensors
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=y
CONFIG_HID_SENSOR_IIO_TRIGGER=y
# end of Hid Sensor IIO Common
CONFIG_IIO_MS_SENSORS_I2C=y
#
# IIO SCMI Sensors
#
# end of IIO SCMI Sensors
#
# SSP Sensor Common
#
# end of SSP Sensor Common
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Digital to analog converters
#
CONFIG_AD5064=y
CONFIG_AD5380=y
CONFIG_AD5446=y
# CONFIG_AD5593R is not set
CONFIG_AD5686=y
CONFIG_AD5696_I2C=y
CONFIG_DPOT_DAC=y
# CONFIG_DS4424 is not set
# CONFIG_LPC18XX_DAC is not set
CONFIG_M62332=y
# CONFIG_MAX517 is not set
# CONFIG_MAX5821 is not set
# CONFIG_MCP4725 is not set
# CONFIG_STM32_DAC is not set
CONFIG_TI_DAC5571=y
# CONFIG_VF610_DAC is not set
# end of Digital to analog converters
#
# IIO dummy driver
#
# end of IIO dummy driver
#
# Filters
#
# end of Filters
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
# end of Clock Generator/Distribution
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL
#
# Digital gyroscope sensors
#
# CONFIG_BMG160 is not set
# CONFIG_FXAS21002C is not set
CONFIG_HID_SENSOR_GYRO_3D=y
CONFIG_MPU3050=y
CONFIG_MPU3050_I2C=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_ITG3200=y
# end of Digital gyroscope sensors
#
# Health Sensors
#
#
# Heart Rate Monitors
#
# CONFIG_AFE4404 is not set
# CONFIG_MAX30100 is not set
CONFIG_MAX30102=y
# end of Heart Rate Monitors
# end of Health Sensors
#
# Humidity sensors
#
# CONFIG_AM2315 is not set
CONFIG_DHT11=y
# CONFIG_HDC100X is not set
CONFIG_HDC2010=y
# CONFIG_HID_SENSOR_HUMIDITY is not set
CONFIG_HTS221=y
CONFIG_HTS221_I2C=y
CONFIG_HTU21=y
CONFIG_SI7005=y
CONFIG_SI7020=y
# end of Humidity sensors
#
# Inertial measurement units
#
CONFIG_BMI160=y
CONFIG_BMI160_I2C=y
# CONFIG_FXOS8700_I2C is not set
CONFIG_KMX61=y
CONFIG_INV_ICM42600=y
CONFIG_INV_ICM42600_I2C=y
CONFIG_INV_MPU6050_IIO=y
CONFIG_INV_MPU6050_I2C=y
# CONFIG_IIO_ST_LSM6DSX is not set
# end of Inertial measurement units
#
# Light sensors
#
CONFIG_ADJD_S311=y
# CONFIG_ADUX1020 is not set
CONFIG_AL3010=y
CONFIG_AL3320A=y
# CONFIG_APDS9300 is not set
# CONFIG_APDS9960 is not set
CONFIG_AS73211=y
CONFIG_BH1750=y
CONFIG_BH1780=y
CONFIG_CM32181=y
CONFIG_CM3232=y
CONFIG_CM3323=y
CONFIG_CM3605=y
CONFIG_CM36651=y
CONFIG_GP2AP002=y
CONFIG_GP2AP020A00F=y
# CONFIG_IQS621_ALS is not set
# CONFIG_SENSORS_ISL29018 is not set
# CONFIG_SENSORS_ISL29028 is not set
# CONFIG_ISL29125 is not set
CONFIG_HID_SENSOR_ALS=y
# CONFIG_HID_SENSOR_PROX is not set
# CONFIG_JSA1212 is not set
# CONFIG_RPR0521 is not set
CONFIG_SENSORS_LM3533=y
# CONFIG_LTR501 is not set
CONFIG_LV0104CS=y
# CONFIG_MAX44000 is not set
# CONFIG_MAX44009 is not set
CONFIG_NOA1305=y
CONFIG_OPT3001=y
# CONFIG_PA12203001 is not set
# CONFIG_SI1133 is not set
CONFIG_SI1145=y
# CONFIG_STK3310 is not set
# CONFIG_ST_UVIS25 is not set
CONFIG_TCS3414=y
CONFIG_TCS3472=y
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=y
CONFIG_TSL2591=y
CONFIG_TSL2772=y
# CONFIG_TSL4531 is not set
# CONFIG_US5182D is not set
CONFIG_VCNL4000=y
# CONFIG_VCNL4035 is not set
CONFIG_VEML6030=y
CONFIG_VEML6070=y
CONFIG_VL6180=y
# CONFIG_ZOPT2201 is not set
# end of Light sensors
#
# Magnetometer sensors
#
CONFIG_AK8974=y
CONFIG_AK8975=y
# CONFIG_AK09911 is not set
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
CONFIG_MAG3110=y
# CONFIG_HID_SENSOR_MAGNETOMETER_3D is not set
CONFIG_MMC35240=y
# CONFIG_IIO_ST_MAGN_3AXIS is not set
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
CONFIG_SENSORS_RM3100=y
CONFIG_SENSORS_RM3100_I2C=y
CONFIG_YAMAHA_YAS530=y
# end of Magnetometer sensors
#
# Multiplexers
#
# CONFIG_IIO_MUX is not set
# end of Multiplexers
#
# Inclinometer sensors
#
# CONFIG_HID_SENSOR_INCLINOMETER_3D is not set
CONFIG_HID_SENSOR_DEVICE_ROTATION=y
# end of Inclinometer sensors
#
# Triggers - standalone
#
CONFIG_IIO_INTERRUPT_TRIGGER=y
# CONFIG_IIO_STM32_LPTIMER_TRIGGER is not set
CONFIG_IIO_STM32_TIMER_TRIGGER=y
CONFIG_IIO_SYSFS_TRIGGER=y
# end of Triggers - standalone
#
# Linear and angular position sensors
#
# CONFIG_IQS624_POS is not set
# CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE is not set
# end of Linear and angular position sensors
#
# Digital potentiometers
#
CONFIG_AD5110=y
# CONFIG_AD5272 is not set
CONFIG_DS1803=y
CONFIG_MAX5432=y
CONFIG_MCP4018=y
CONFIG_MCP4531=y
# CONFIG_TPL0102 is not set
# end of Digital potentiometers
#
# Digital potentiostats
#
CONFIG_LMP91000=y
# end of Digital potentiostats
#
# Pressure sensors
#
CONFIG_ABP060MG=y
# CONFIG_BMP280 is not set
CONFIG_DLHL60D=y
# CONFIG_DPS310 is not set
# CONFIG_HID_SENSOR_PRESS is not set
CONFIG_HP03=y
CONFIG_ICP10100=y
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
# CONFIG_MPL3115 is not set
CONFIG_MS5611=y
CONFIG_MS5611_I2C=y
CONFIG_MS5637=y
CONFIG_IIO_ST_PRESS=y
# CONFIG_IIO_ST_PRESS_I2C is not set
# CONFIG_T5403 is not set
CONFIG_HP206C=y
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
# end of Pressure sensors
#
# Lightning sensors
#
# end of Lightning sensors
#
# Proximity and distance sensors
#
CONFIG_CROS_EC_MKBP_PROXIMITY=y
CONFIG_ISL29501=y
# CONFIG_LIDAR_LITE_V2 is not set
CONFIG_MB1232=y
# CONFIG_PING is not set
CONFIG_RFD77402=y
CONFIG_SRF04=y
CONFIG_SX_COMMON=y
CONFIG_SX9310=y
CONFIG_SX9324=y
CONFIG_SX9360=y
CONFIG_SX9500=y
# CONFIG_SRF08 is not set
CONFIG_VCNL3020=y
# CONFIG_VL53L0X_I2C is not set
# end of Proximity and distance sensors
#
# Resolver to digital converters
#
# end of Resolver to digital converters
#
# Temperature sensors
#
# CONFIG_IQS620AT_TEMP is not set
# CONFIG_HID_SENSOR_TEMP is not set
CONFIG_MLX90614=y
CONFIG_MLX90632=y
CONFIG_TMP006=y
# CONFIG_TMP007 is not set
# CONFIG_TMP117 is not set
CONFIG_TSYS01=y
CONFIG_TSYS02D=y
# end of Temperature sensors
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_DEBUG=y
CONFIG_PWM_ATMEL=y
CONFIG_PWM_ATMEL_TCB=y
CONFIG_PWM_BCM_IPROC=y
CONFIG_PWM_BCM_KONA=y
CONFIG_PWM_BCM2835=y
CONFIG_PWM_BERLIN=y
# CONFIG_PWM_BRCMSTB is not set
CONFIG_PWM_CLK=y
CONFIG_PWM_CLPS711X=y
# CONFIG_PWM_CROS_EC is not set
CONFIG_PWM_EP93XX=y
CONFIG_PWM_FSL_FTM=y
CONFIG_PWM_HIBVT=y
# CONFIG_PWM_IMG is not set
CONFIG_PWM_IMX1=y
# CONFIG_PWM_IMX27 is not set
CONFIG_PWM_IMX_TPM=y
# CONFIG_PWM_INTEL_LGM is not set
CONFIG_PWM_IQS620A=y
# CONFIG_PWM_JZ4740 is not set
CONFIG_PWM_KEEMBAY=y
CONFIG_PWM_LP3943=y
# CONFIG_PWM_LPC18XX_SCT is not set
CONFIG_PWM_LPC32XX=y
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PLATFORM=y
CONFIG_PWM_MESON=y
# CONFIG_PWM_MTK_DISP is not set
# CONFIG_PWM_MEDIATEK is not set
CONFIG_PWM_MXS=y
CONFIG_PWM_NTXEC=y
CONFIG_PWM_OMAP_DMTIMER=y
# CONFIG_PWM_PCA9685 is not set
CONFIG_PWM_PXA=y
CONFIG_PWM_RASPBERRYPI_POE=y
CONFIG_PWM_RCAR=y
# CONFIG_PWM_RENESAS_TPU is not set
CONFIG_PWM_ROCKCHIP=y
CONFIG_PWM_SAMSUNG=y
# CONFIG_PWM_SIFIVE is not set
CONFIG_PWM_SL28CPLD=y
CONFIG_PWM_SPEAR=y
CONFIG_PWM_SPRD=y
CONFIG_PWM_STI=y
CONFIG_PWM_STM32=y
# CONFIG_PWM_STM32_LP is not set
# CONFIG_PWM_SUN4I is not set
# CONFIG_PWM_SUNPLUS is not set
CONFIG_PWM_TEGRA=y
CONFIG_PWM_TIECAP=y
# CONFIG_PWM_TIEHRPWM is not set
CONFIG_PWM_VISCONTI=y
# CONFIG_PWM_VT8500 is not set
#
# IRQ chip support
#
# CONFIG_AL_FIC is not set
CONFIG_JCORE_AIC=y
CONFIG_RENESAS_INTC_IRQPIN=y
CONFIG_RENESAS_IRQC=y
# CONFIG_RENESAS_RZA1_IRQC is not set
# CONFIG_RENESAS_RZG2L_IRQC is not set
CONFIG_SL28CPLD_INTC=y
# CONFIG_TS4800_IRQ is not set
# CONFIG_INGENIC_TCU_IRQ is not set
# CONFIG_IRQ_UNIPHIER_AIDET is not set
# CONFIG_MESON_IRQ_GPIO is not set
CONFIG_IMX_IRQSTEER=y
CONFIG_IMX_INTMUX=y
CONFIG_EXYNOS_IRQ_COMBINER=y
CONFIG_MST_IRQ=y
CONFIG_MCHP_EIC=y
CONFIG_SUNPLUS_SP7021_INTC=y
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_A10SR=y
CONFIG_RESET_ATH79=y
# CONFIG_RESET_AXS10X is not set
CONFIG_RESET_BCM6345=y
CONFIG_RESET_BERLIN=y
CONFIG_RESET_BRCMSTB=y
# CONFIG_RESET_BRCMSTB_RESCAL is not set
# CONFIG_RESET_HSDK is not set
CONFIG_RESET_IMX7=y
# CONFIG_RESET_INTEL_GW is not set
CONFIG_RESET_K210=y
# CONFIG_RESET_LANTIQ is not set
# CONFIG_RESET_LPC18XX is not set
CONFIG_RESET_MCHP_SPARX5=y
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_MESON_AUDIO_ARB is not set
CONFIG_RESET_NPCM=y
CONFIG_RESET_PISTACHIO=y
# CONFIG_RESET_QCOM_AOSS is not set
CONFIG_RESET_QCOM_PDC=y
CONFIG_RESET_RASPBERRYPI=y
# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
CONFIG_RESET_SCMI=y
CONFIG_RESET_SIMPLE=y
CONFIG_RESET_SOCFPGA=y
# CONFIG_RESET_STARFIVE_JH7100 is not set
# CONFIG_RESET_SUNPLUS is not set
CONFIG_RESET_SUNXI=y
# CONFIG_RESET_TI_SCI is not set
CONFIG_RESET_TI_SYSCON=y
CONFIG_RESET_TI_TPS380X=y
CONFIG_RESET_TN48M_CPLD=y
CONFIG_RESET_UNIPHIER=y
# CONFIG_RESET_UNIPHIER_GLUE is not set
CONFIG_RESET_ZYNQ=y
# CONFIG_COMMON_RESET_HI3660 is not set
# CONFIG_COMMON_RESET_HI6220 is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_PHY_LPC18XX_USB_OTG=y
CONFIG_PHY_PISTACHIO_USB=y
# CONFIG_PHY_XGENE is not set
CONFIG_PHY_CAN_TRANSCEIVER=y
CONFIG_PHY_SUN6I_MIPI_DPHY=y
CONFIG_PHY_SUN50I_USB3=y
CONFIG_PHY_MESON8_HDMI_TX=y
# CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG is not set
# CONFIG_PHY_MESON_G12A_USB2 is not set
CONFIG_PHY_MESON_G12A_USB3_PCIE=y
CONFIG_PHY_MESON_AXG_PCIE=y
# CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG is not set
CONFIG_PHY_MESON_AXG_MIPI_DPHY=y
#
# PHY drivers for Broadcom platforms
#
CONFIG_PHY_BCM63XX_USBH=y
# CONFIG_PHY_CYGNUS_PCIE is not set
CONFIG_PHY_BCM_SR_USB=y
# CONFIG_BCM_KONA_USB2_PHY is not set
CONFIG_PHY_BCM_NS_USB2=y
CONFIG_PHY_NS2_USB_DRD=y
CONFIG_PHY_BRCM_SATA=y
CONFIG_PHY_BRCM_USB=y
CONFIG_PHY_BCM_SR_PCIE=y
# end of PHY drivers for Broadcom platforms
CONFIG_PHY_CADENCE_TORRENT=y
CONFIG_PHY_CADENCE_DPHY=y
CONFIG_PHY_CADENCE_DPHY_RX=y
# CONFIG_PHY_CADENCE_SIERRA is not set
CONFIG_PHY_CADENCE_SALVO=y
CONFIG_PHY_FSL_IMX8MQ_USB=y
CONFIG_PHY_MIXEL_LVDS_PHY=y
CONFIG_PHY_MIXEL_MIPI_DPHY=y
CONFIG_PHY_FSL_IMX8M_PCIE=y
CONFIG_PHY_FSL_LYNX_28G=y
CONFIG_PHY_HI6220_USB=y
CONFIG_PHY_HI3660_USB=y
CONFIG_PHY_HI3670_USB=y
CONFIG_PHY_HI3670_PCIE=y
CONFIG_PHY_HISTB_COMBPHY=y
CONFIG_PHY_HISI_INNO_USB2=y
# CONFIG_PHY_LANTIQ_VRX200_PCIE is not set
CONFIG_PHY_LANTIQ_RCU_USB2=y
CONFIG_ARMADA375_USBCLUSTER_PHY=y
CONFIG_PHY_BERLIN_SATA=y
CONFIG_PHY_BERLIN_USB=y
CONFIG_PHY_MVEBU_A3700_UTMI=y
# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=y
CONFIG_PHY_PXA_USB=y
# CONFIG_PHY_MMP3_USB is not set
# CONFIG_PHY_MMP3_HSIC is not set
CONFIG_PHY_MTK_PCIE=y
CONFIG_PHY_MTK_UFS=y
CONFIG_PHY_MTK_HDMI=y
CONFIG_PHY_MTK_MIPI_DSI=y
# CONFIG_PHY_MTK_DP is not set
# CONFIG_PHY_SPARX5_SERDES is not set
CONFIG_PHY_LAN966X_SERDES=y
# CONFIG_PHY_OCELOT_SERDES is not set
CONFIG_PHY_ATH79_USB=y
# CONFIG_PHY_QCOM_EDP is not set
CONFIG_PHY_QCOM_IPQ4019_USB=y
# CONFIG_PHY_QCOM_PCIE2 is not set
CONFIG_PHY_QCOM_QMP=y
# CONFIG_PHY_QCOM_QUSB2 is not set
CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y
CONFIG_PHY_QCOM_USB_HS_28NM=y
CONFIG_PHY_QCOM_USB_SS=y
CONFIG_PHY_QCOM_IPQ806X_USB=y
CONFIG_PHY_MT7621_PCI=y
CONFIG_PHY_RALINK_USB=y
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
CONFIG_PHY_ROCKCHIP_DPHY_RX0=y
CONFIG_PHY_ROCKCHIP_INNO_HDMI=y
# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=y
CONFIG_PHY_ROCKCHIP_PCIE=y
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
# CONFIG_PHY_EXYNOS_PCIE is not set
# CONFIG_PHY_SAMSUNG_UFS is not set
CONFIG_PHY_SAMSUNG_USB2=y
CONFIG_PHY_S5PV210_USB2=y
# CONFIG_PHY_UNIPHIER_USB2 is not set
CONFIG_PHY_UNIPHIER_USB3=y
CONFIG_PHY_UNIPHIER_PCIE=y
# CONFIG_PHY_UNIPHIER_AHCI is not set
CONFIG_PHY_ST_SPEAR1310_MIPHY=y
CONFIG_PHY_ST_SPEAR1340_MIPHY=y
CONFIG_PHY_STIH407_USB=y
CONFIG_PHY_STM32_USBPHYC=y
CONFIG_PHY_TEGRA194_P2U=y
CONFIG_PHY_DA8XX_USB=y
CONFIG_PHY_AM654_SERDES=y
CONFIG_OMAP_CONTROL_PHY=y
CONFIG_TI_PIPE3=y
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
CONFIG_PHY_INTEL_KEEMBAY_USB=y
# CONFIG_PHY_INTEL_LGM_COMBO is not set
CONFIG_PHY_INTEL_LGM_EMMC=y
CONFIG_PHY_INTEL_THUNDERBAY_EMMC=y
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem
CONFIG_POWERCAP=y
CONFIG_DTPM=y
CONFIG_MCB=y
CONFIG_MCB_LPC=y
#
# Performance monitor support
#
CONFIG_ARM_CCN=y
CONFIG_ARM_CMN=y
# CONFIG_FSL_IMX8_DDR_PMU is not set
# CONFIG_XGENE_PMU is not set
CONFIG_ARM_DMC620_PMU=y
CONFIG_MARVELL_CN10K_TAD_PMU=y
CONFIG_MARVELL_CN10K_DDR_PMU=y
# end of Performance monitor support
# CONFIG_RAS is not set
#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android
# CONFIG_LIBNVDIMM is not set
CONFIG_DAX=y
CONFIG_DEV_DAX=y
CONFIG_NVMEM=y
# CONFIG_NVMEM_SYSFS is not set
CONFIG_NVMEM_IMX_IIM=y
CONFIG_NVMEM_IMX_OCOTP=y
# CONFIG_JZ4780_EFUSE is not set
CONFIG_NVMEM_LPC18XX_EEPROM=y
CONFIG_NVMEM_LPC18XX_OTP=y
CONFIG_NVMEM_MXS_OCOTP=y
# CONFIG_MTK_EFUSE is not set
# CONFIG_MICROCHIP_OTPC is not set
CONFIG_NVMEM_NINTENDO_OTP=y
# CONFIG_QCOM_QFPROM is not set
# CONFIG_NVMEM_SPMI_SDAM is not set
# CONFIG_ROCKCHIP_EFUSE is not set
# CONFIG_ROCKCHIP_OTP is not set
# CONFIG_NVMEM_BCM_OCOTP is not set
# CONFIG_NVMEM_STM32_ROMEM is not set
# CONFIG_UNIPHIER_EFUSE is not set
CONFIG_NVMEM_VF610_OCOTP=y
# CONFIG_MESON_MX_EFUSE is not set
CONFIG_NVMEM_SNVS_LPGPR=y
# CONFIG_RAVE_SP_EEPROM is not set
# CONFIG_SC27XX_EFUSE is not set
# CONFIG_SPRD_EFUSE is not set
# CONFIG_NVMEM_RMEM is not set
# CONFIG_NVMEM_BRCM_NVRAM is not set
CONFIG_NVMEM_LAYERSCAPE_SFP=y
# CONFIG_NVMEM_SUNPLUS_OCOTP is not set
CONFIG_NVMEM_APPLE_EFUSES=y
#
# HW tracing support
#
CONFIG_STM=y
# CONFIG_STM_PROTO_BASIC is not set
CONFIG_STM_PROTO_SYS_T=y
CONFIG_STM_DUMMY=y
CONFIG_STM_SOURCE_CONSOLE=y
CONFIG_STM_SOURCE_HEARTBEAT=y
# CONFIG_STM_SOURCE_FTRACE is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support
# CONFIG_FPGA is not set
CONFIG_FSI=y
CONFIG_FSI_NEW_DEV_NODE=y
CONFIG_FSI_MASTER_GPIO=y
# CONFIG_FSI_MASTER_HUB is not set
# CONFIG_FSI_MASTER_AST_CF is not set
# CONFIG_FSI_MASTER_ASPEED is not set
CONFIG_FSI_SCOM=y
CONFIG_TEE=y
CONFIG_MULTIPLEXER=y
#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=y
CONFIG_MUX_GPIO=y
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers
CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
CONFIG_SLIMBUS=y
CONFIG_SLIM_QCOM_CTRL=y
CONFIG_INTERCONNECT=y
CONFIG_INTERCONNECT_IMX=y
CONFIG_INTERCONNECT_IMX8MM=y
# CONFIG_INTERCONNECT_IMX8MN is not set
CONFIG_INTERCONNECT_IMX8MQ=y
# CONFIG_INTERCONNECT_IMX8MP is not set
CONFIG_INTERCONNECT_QCOM_OSM_L3=y
# CONFIG_INTERCONNECT_SAMSUNG is not set
CONFIG_COUNTER=y
CONFIG_104_QUAD_8=y
CONFIG_INTERRUPT_CNT=y
CONFIG_STM32_TIMER_CNT=y
# CONFIG_STM32_LPTIMER_CNT is not set
CONFIG_TI_EQEP=y
CONFIG_FTM_QUADDEC=y
# CONFIG_MICROCHIP_TCB_CAPTURE is not set
# CONFIG_MOST is not set
CONFIG_PECI=y
CONFIG_PECI_CPU=y
# CONFIG_PECI_ASPEED is not set
CONFIG_HTE=y
# end of Device Drivers
#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
# CONFIG_REISERFS_FS_SECURITY is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=y
CONFIG_XFS_SUPPORT_V4=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_ONLINE_SCRUB is not set
CONFIG_XFS_WARN=y
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
CONFIG_BTRFS_DEBUG=y
CONFIG_BTRFS_ASSERT=y
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
# CONFIG_F2FS_FS_XATTR is not set
CONFIG_F2FS_CHECK_FS=y
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_F2FS_FS_COMPRESSION=y
CONFIG_F2FS_FS_LZO=y
CONFIG_F2FS_FS_LZORLE=y
CONFIG_F2FS_FS_LZ4=y
# CONFIG_F2FS_FS_LZ4HC is not set
# CONFIG_F2FS_FS_ZSTD is not set
# CONFIG_F2FS_IOSTAT is not set
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
# CONFIG_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY_USER is not set
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
CONFIG_FSCACHE=y
CONFIG_FSCACHE_DEBUG=y
# CONFIG_CACHEFILES is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_EXFAT_FS=y
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
# CONFIG_NTFS_RW is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_INODE64=y
# CONFIG_HUGETLBFS is not set
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=y
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
CONFIG_BEFS_FS=y
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
CONFIG_EFS_FS=y
CONFIG_CRAMFS=y
# CONFIG_CRAMFS_BLOCKDEV is not set
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
CONFIG_SQUASHFS_XATTR=y
# CONFIG_SQUASHFS_ZLIB is not set
CONFIG_SQUASHFS_LZ4=y
# CONFIG_SQUASHFS_LZO is not set
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
# CONFIG_MINIX_FS is not set
CONFIG_OMFS_FS=y
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=y
CONFIG_QNX6FS_FS=y
# CONFIG_QNX6FS_DEBUG is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
CONFIG_SYSV_FS=y
# CONFIG_UFS_FS is not set
CONFIG_EROFS_FS=y
# CONFIG_EROFS_FS_DEBUG is not set
# CONFIG_EROFS_FS_XATTR is not set
# CONFIG_EROFS_FS_ZIP is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
# CONFIG_NLS_MAC_ROMAN is not set
CONFIG_NLS_MAC_CELTIC=y
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not set
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
CONFIG_UNICODE=y
CONFIG_UNICODE_NORMALIZATION_SELFTEST=y
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_PATH is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_LOADPIN=y
CONFIG_SECURITY_LOADPIN_ENFORCE=y
CONFIG_SECURITY_YAMA=y
CONFIG_SECURITY_SAFESETID=y
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
# CONFIG_INTEGRITY is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_STACK_ALL_PATTERN is not set
# CONFIG_INIT_STACK_ALL_ZERO is not set
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=y
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_DH_RFC7919_GROUPS=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECDSA=y
CONFIG_CRYPTO_ECRDSA=y
# CONFIG_CRYPTO_SM2 is not set
CONFIG_CRYPTO_CURVE25519=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_AEGIS128=y
# CONFIG_CRYPTO_SEQIV is not set
# CONFIG_CRYPTO_ECHAINIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=y
CONFIG_CRYPTO_NHPOLY1305=y
CONFIG_CRYPTO_ADIANTUM=y
# CONFIG_CRYPTO_HCTR2 is not set
CONFIG_CRYPTO_ESSIV=y
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_VMAC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_SPARC64 is not set
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_XXHASH=y
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MD5_SPARC64=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SPARC64=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA256_SPARC64=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA512_SPARC64 is not set
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_SM3_GENERIC=y
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_WP512=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_SPARC64=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAMELLIA_SPARC64=y
CONFIG_CRYPTO_CAST_COMMON=y
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=y
# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_DES_SPARC64=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_ARIA=y
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SM4_GENERIC is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
CONFIG_CRYPTO_LZ4HC=y
# CONFIG_CRYPTO_ZSTD is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# CONFIG_CRYPTO_HW is not set
#
# Certificates for signature checking
#
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
# CONFIG_RAID6_PQ_BENCHMARK is not set
CONFIG_LINEAR_RANGES=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
# CONFIG_CORDIC is not set
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_STMP_DEVICE=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_LIB_MEMNEQ=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_BIT=y
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_TEST=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_DMA_API_DEBUG=y
# CONFIG_DMA_API_DEBUG_SG is not set
CONFIG_DMA_MAP_BENCHMARK=y
CONFIG_SGL_ALLOC=y
CONFIG_IOMMU_HELPER=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_SG_POOL=y
CONFIG_STACKDEPOT=y
CONFIG_REF_TRACKER=y
CONFIG_SBITMAP=y
CONFIG_PARMAN=y
CONFIG_OBJAGG=y
# end of Library routines
CONFIG_POLYNOMIAL=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_SYMBOLIC_ERRNAME=y
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_NONE is not set
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_COMPRESSED is not set
CONFIG_DEBUG_INFO_SPLIT=y
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_GDB_SCRIPTS=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_READABLE_ASM=y
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_FS_ALLOW_ALL is not set
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
CONFIG_DEBUG_FS_ALLOW_NONE=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_KGDB_KDB=y
CONFIG_KDB_DEFAULT_ENABLE=0x1
# CONFIG_KDB_KEYBOARD is not set
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
# CONFIG_UBSAN is not set
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
CONFIG_NET_DEV_REFCNT_TRACKER=y
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
CONFIG_PAGE_OWNER=y
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
# CONFIG_DEBUG_OBJECTS_FREE is not set
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
# CONFIG_DEBUG_OBJECTS_WORK is not set
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
# CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF is not set
# CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging
CONFIG_DEBUG_SHIRQ=y
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
# CONFIG_WQ_WATCHDOG is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RAW_LOCK_NESTING=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_SMALL=y
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=y
CONFIG_WW_MUTEX_SELFTEST=y
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_HAVE_DEBUG_BUGVERBOSE=y
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
# CONFIG_PROVE_RCU_LIST is not set
CONFIG_TORTURE_TEST=y
CONFIG_RCU_SCALE_TEST=y
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_REF_SCALE_TEST=y
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
#
# sparc Debugging
#
CONFIG_DEBUG_DCFLUSH=y
# end of sparc Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_LKDTM is not set
CONFIG_TEST_MIN_HEAP=y
CONFIG_TEST_DIV64=y
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_TEST_REF_TRACKER=y
CONFIG_RBTREE_TEST=y
# CONFIG_REED_SOLOMON_TEST is not set
CONFIG_INTERVAL_TREE_TEST=y
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_STRING_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_STRSCPY=y
# CONFIG_TEST_KSTRTOX is not set
CONFIG_TEST_PRINTF=y
CONFIG_TEST_SCANF=y
CONFIG_TEST_BITMAP=y
CONFIG_TEST_UUID=y
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_RHASHTABLE is not set
CONFIG_TEST_SIPHASH=y
CONFIG_TEST_IDA=y
# CONFIG_TEST_PARMAN is not set
CONFIG_FIND_BIT_BENCHMARK=y
# CONFIG_TEST_FIRMWARE is not set
CONFIG_TEST_UDELAY=y
# CONFIG_TEST_MEMCAT_P is not set
CONFIG_TEST_OBJAGG=y
# CONFIG_TEST_MEMINIT is not set
CONFIG_TEST_FREE_PAGES=y
# end of Kernel Testing and Coverage
CONFIG_WARN_MISSING_DOCUMENTS=y
# CONFIG_WARN_ABI_ERRORS is not set
# end of Kernel hacking
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 3/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
@ 2022-09-03 2:15 kernel test robot
0 siblings, 0 replies; 29+ messages in thread
From: kernel test robot @ 2022-09-03 2:15 UTC (permalink / raw)
To: kbuild
[-- Attachment #1: Type: text/plain, Size: 26179 bytes --]
::::::
:::::: Manual check reason: "low confidence static check warning: drivers/tty/serial/mux.c:181:8: sparse: sparse: Trying to use reserved word 'for' as identifier"
::::::
BCC: lkp(a)intel.com
CC: kbuild-all(a)lists.01.org
In-Reply-To: <20220901110657.3305-4-jslaby@suse.cz>
References: <20220901110657.3305-4-jslaby@suse.cz>
TO: Jiri Slaby <jslaby@suse.cz>
Hi Jiri,
I love your patch! Perhaps something to improve:
[auto build test WARNING on tty/tty-testing]
[also build test WARNING on usb/usb-testing shawnguo/for-next linus/master v6.0-rc3 next-20220901]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Jiri-Slaby/tty-TX-helpers/20220901-190806
base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-testing
:::::: branch date: 2 days ago
:::::: commit date: 2 days ago
config: parisc-randconfig-s031-20220901 (https://download.01.org/0day-ci/archive/20220903/202209031027.KQvRt9IN-lkp(a)intel.com/config)
compiler: hppa-linux-gcc (GCC) 12.1.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-39-gce1a6720-dirty
# https://github.com/intel-lab-lkp/linux/commit/f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Jiri-Slaby/tty-TX-helpers/20220901-190806
git checkout f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=parisc SHELL=/bin/bash drivers/tty/serial/
If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
drivers/tty/serial/mux.c:181:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mux.c:181:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/mux.c:181:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mux.c:181:8: sparse: sparse: got ;
>> drivers/tty/serial/mux.c:181:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/mux.c:181:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/mux.c:181:8: sparse: sparse: got &&
drivers/tty/serial/mux.c:181:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/mux.c:181:8: sparse: sparse: got --
drivers/tty/serial/mux.c:181:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mux.c:181:8: sparse: sparse: got (
drivers/tty/serial/mux.c:181:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/mux.c:181:8: sparse: sparse: got ->
>> drivers/tty/serial/mux.c:181:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/mux.c:181:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mux.c:181:8: sparse: sparse: got }
drivers/tty/serial/mux.c:181:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mux.c:181:8: sparse: sparse: got (
drivers/tty/serial/mux.c:181:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/mux.c:181:8: sparse: sparse: got ->
drivers/tty/serial/mux.c:181:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mux.c:181:8: sparse: sparse: got }
drivers/tty/serial/mux.c:181:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mux.c:181:8: sparse: sparse: got <
>> drivers/tty/serial/mux.c:181:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/mux.c:181:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mux.c:181:8: sparse: sparse: got ==
>> drivers/tty/serial/mux.c:181:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/mux.c:181:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mux.c:181:8: sparse: sparse: got }
drivers/tty/serial/mux.c:181:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mux.c:181:8: sparse: sparse: got }
drivers/tty/serial/mux.c:181:8: sparse: sparse: symbol '__raw_writel' redeclared with different type (different argument counts):
>> drivers/tty/serial/mux.c:181:8: sparse: int static [signed] [toplevel] __raw_writel( ... )
drivers/tty/serial/mux.c: note: in included file (through include/linux/scatterlist.h, include/linux/kfifo.h, include/linux/tty_port.h, ...):
arch/parisc/include/asm/io.h:159:20: sparse: note: previously declared as:
>> arch/parisc/include/asm/io.h:159:20: sparse: void static inline [gnu_inline] [toplevel] __raw_writel( ... )
drivers/tty/serial/mux.c:181:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/mux.c:181:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/mux.c:181:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
>> drivers/tty/serial/mux.c:181:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/mux.c:181:8: sparse: note: previously declared as:
>> drivers/tty/serial/mux.c:181:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/mux.c:181:8: sparse: sparse: symbol '__raw_writel' redeclared with different type (different argument counts):
>> drivers/tty/serial/mux.c:181:8: sparse: int static [signed] [toplevel] __raw_writel( ... )
arch/parisc/include/asm/io.h:159:20: sparse: note: previously declared as:
>> arch/parisc/include/asm/io.h:159:20: sparse: void static inline [gnu_inline] [toplevel] __raw_writel( ... )
>> drivers/tty/serial/mux.c:181:8: sparse: sparse: cannot dereference this type
>> drivers/tty/serial/mux.c:181:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/mux.c:181:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
>> drivers/tty/serial/mux.c:181:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/mux.c:181:8: sparse: note: previously declared as:
>> drivers/tty/serial/mux.c:181:8: sparse: unsigned int [addressable] [toplevel] pending
>> drivers/tty/serial/mux.c:195:21: sparse: sparse: too many arguments for function mux_transmit
>> drivers/tty/serial/mux.c:375:25: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/mux.c:377:17: sparse: sparse: too many arguments for function __raw_writel
vim +/for +181 drivers/tty/serial/mux.c
f6f99189d77ea4 drivers/tty/serial/mux.c Jiri Slaby 2022-09-01 180
f6f99189d77ea4 drivers/tty/serial/mux.c Jiri Slaby 2022-09-01 @181 static DEFINE_UART_PORT_TX_HELPER_LIMITED(mux_transmit, port, ch,
f6f99189d77ea4 drivers/tty/serial/mux.c Jiri Slaby 2022-09-01 182 true,
f6f99189d77ea4 drivers/tty/serial/mux.c Jiri Slaby 2022-09-01 183 UART_PUT_CHAR(port, ch),
f6f99189d77ea4 drivers/tty/serial/mux.c Jiri Slaby 2022-09-01 184 mux_tx_done(port));
f6f99189d77ea4 drivers/tty/serial/mux.c Jiri Slaby 2022-09-01 185
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 186 /**
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 187 * mux_write - Write chars to the mux fifo.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 188 * @port: Ptr to the uart_port.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 189 *
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 190 * This function writes all the data from the uart buffer to
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 191 * the mux fifo.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 192 */
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 193 static void mux_write(struct uart_port *port)
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 194 {
f6f99189d77ea4 drivers/tty/serial/mux.c Jiri Slaby 2022-09-01 @195 mux_transmit(port, port->fifosize - UART_GET_FIFO_CNT(port));
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 196 }
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 197
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 198 /**
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 199 * mux_read - Read chars from the mux fifo.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 200 * @port: Ptr to the uart_port.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 201 *
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 202 * This reads all available data from the mux's fifo and pushes
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 203 * the data to the tty layer.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 204 */
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 205 static void mux_read(struct uart_port *port)
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 206 {
92a19f9cec9a80 drivers/tty/serial/mux.c Jiri Slaby 2013-01-03 207 struct tty_port *tport = &port->state->port;
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 208 int data;
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 209 __u32 start_count = port->icount.rx;
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 210
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 211 while(1) {
92495c0ebc99ee drivers/serial/mux.c Ryan Bradetich 2005-11-17 212 data = __raw_readl(port->membase + IO_DATA_REG_OFFSET);
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 213
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 214 if (MUX_STATUS(data))
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 215 continue;
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 216
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 217 if (MUX_EOFIFO(data))
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 218 break;
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 219
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 220 port->icount.rx++;
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 221
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 222 if (MUX_BREAK(data)) {
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 223 port->icount.brk++;
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 224 if(uart_handle_break(port))
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 225 continue;
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 226 }
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 227
be577a5220b25e drivers/serial/mux.c Matthew Wilcox 2006-10-06 228 if (uart_handle_sysrq_char(port, data & 0xffu))
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 229 continue;
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 230
92a19f9cec9a80 drivers/tty/serial/mux.c Jiri Slaby 2013-01-03 231 tty_insert_flip_char(tport, data & 0xFF, TTY_NORMAL);
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 232 }
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 233
2e124b4a390ca8 drivers/tty/serial/mux.c Jiri Slaby 2013-01-03 234 if (start_count != port->icount.rx)
2e124b4a390ca8 drivers/tty/serial/mux.c Jiri Slaby 2013-01-03 235 tty_flip_buffer_push(tport);
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 236 }
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 237
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 238 /**
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 239 * mux_startup - Initialize the port.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 240 * @port: Ptr to the uart_port.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 241 *
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 242 * Grab any resources needed for this port and start the
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 243 * mux timer.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 244 */
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 245 static int mux_startup(struct uart_port *port)
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 246 {
4bd5d82779466a drivers/serial/mux.c Ryan Bradetich 2006-11-03 247 mux_ports[port->line].enabled = 1;
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 248 return 0;
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 249 }
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 250
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 251 /**
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 252 * mux_shutdown - Disable the port.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 253 * @port: Ptr to the uart_port.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 254 *
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 255 * Release any resources needed for the port.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 256 */
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 257 static void mux_shutdown(struct uart_port *port)
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 258 {
4bd5d82779466a drivers/serial/mux.c Ryan Bradetich 2006-11-03 259 mux_ports[port->line].enabled = 0;
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 260 }
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 261
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 262 /**
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 263 * mux_set_termios - Chane port parameters.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 264 * @port: Ptr to the uart_port.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 265 * @termios: new termios settings.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 266 * @old: old termios settings.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 267 *
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 268 * The Serial Mux does not support this function.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 269 */
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 270 static void
606d099cdd1080 drivers/serial/mux.c Alan Cox 2006-12-08 271 mux_set_termios(struct uart_port *port, struct ktermios *termios,
bec5b814d46c2a drivers/tty/serial/mux.c Ilpo Järvinen 2022-08-16 272 const struct ktermios *old)
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 273 {
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 274 }
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 275
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 276 /**
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 277 * mux_type - Describe the port.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 278 * @port: Ptr to the uart_port.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 279 *
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 280 * Return a pointer to a string constant describing the
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 281 * specified port.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 282 */
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 283 static const char *mux_type(struct uart_port *port)
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 284 {
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 285 return "Mux";
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 286 }
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 287
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 288 /**
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 289 * mux_release_port - Release memory and IO regions.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 290 * @port: Ptr to the uart_port.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 291 *
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 292 * Release any memory and IO region resources currently in use by
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 293 * the port.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 294 */
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 295 static void mux_release_port(struct uart_port *port)
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 296 {
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 297 }
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 298
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 299 /**
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 300 * mux_request_port - Request memory and IO regions.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 301 * @port: Ptr to the uart_port.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 302 *
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 303 * Request any memory and IO region resources required by the port.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 304 * If any fail, no resources should be registered when this function
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 305 * returns, and it should return -EBUSY on failure.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 306 */
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 307 static int mux_request_port(struct uart_port *port)
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 308 {
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 309 return 0;
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 310 }
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 311
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 312 /**
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 313 * mux_config_port - Perform port autoconfiguration.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 314 * @port: Ptr to the uart_port.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 315 * @type: Bitmask of required configurations.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 316 *
4bd5d82779466a drivers/serial/mux.c Ryan Bradetich 2006-11-03 317 * Perform any autoconfiguration steps for the port. This function is
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 318 * called if the UPF_BOOT_AUTOCONF flag is specified for the port.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 319 * [Note: This is required for now because of a bug in the Serial core.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 320 * rmk has already submitted a patch to linus, should be available for
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 321 * 2.5.47.]
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 322 */
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 323 static void mux_config_port(struct uart_port *port, int type)
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 324 {
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 325 port->type = PORT_MUX;
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 326 }
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 327
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 328 /**
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 329 * mux_verify_port - Verify the port information.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 330 * @port: Ptr to the uart_port.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 331 * @ser: Ptr to the serial information.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 332 *
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 333 * Verify the new serial port information contained within serinfo is
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 334 * suitable for this port type.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 335 */
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 336 static int mux_verify_port(struct uart_port *port, struct serial_struct *ser)
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 337 {
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 338 if(port->membase == NULL)
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 339 return -EINVAL;
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 340
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 341 return 0;
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 342 }
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 343
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 344 /**
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 345 * mux_drv_poll - Mux poll function.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 346 * @unused: Unused variable
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 347 *
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 348 * This function periodically polls the Serial MUX to check for new data.
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 349 */
e99e88a9d2b067 drivers/tty/serial/mux.c Kees Cook 2017-10-16 350 static void mux_poll(struct timer_list *unused)
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 351 {
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 352 int i;
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 353
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 354 for(i = 0; i < port_cnt; ++i) {
4bd5d82779466a drivers/serial/mux.c Ryan Bradetich 2006-11-03 355 if(!mux_ports[i].enabled)
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 356 continue;
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 357
4bd5d82779466a drivers/serial/mux.c Ryan Bradetich 2006-11-03 358 mux_read(&mux_ports[i].port);
4bd5d82779466a drivers/serial/mux.c Ryan Bradetich 2006-11-03 359 mux_write(&mux_ports[i].port);
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 360 }
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 361
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 362 mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY);
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 363 }
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 364
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 365
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 366 #ifdef CONFIG_SERIAL_MUX_CONSOLE
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 367 static void mux_console_write(struct console *co, const char *s, unsigned count)
^1da177e4c3f41 drivers/serial/mux.c Linus Torvalds 2005-04-16 368 {
3de7b6482b4e9a drivers/serial/mux.c Ryan Bradetich 2006-11-03 369 /* Wait until the FIFO drains. */
3de7b6482b4e9a drivers/serial/mux.c Ryan Bradetich 2006-11-03 370 while(UART_GET_FIFO_CNT(&mux_ports[0].port))
3de7b6482b4e9a drivers/serial/mux.c Ryan Bradetich 2006-11-03 371 udelay(1);
3de7b6482b4e9a drivers/serial/mux.c Ryan Bradetich 2006-11-03 372
3de7b6482b4e9a drivers/serial/mux.c Ryan Bradetich 2006-11-03 373 while(count--) {
3de7b6482b4e9a drivers/serial/mux.c Ryan Bradetich 2006-11-03 374 if(*s == '\n') {
3de7b6482b4e9a drivers/serial/mux.c Ryan Bradetich 2006-11-03 @375 UART_PUT_CHAR(&mux_ports[0].port, '\r');
3de7b6482b4e9a drivers/serial/mux.c Ryan Bradetich 2006-11-03 376 }
3de7b6482b4e9a drivers/serial/mux.c Ryan Bradetich 2006-11-03 377 UART_PUT_CHAR(&mux_ports[0].port, *s++);
3de7b6482b4e9a drivers/serial/mux.c Ryan Bradetich 2006-11-03 378 }
3de7b6482b4e9a drivers/serial/mux.c Ryan Bradetich 2006-11-03 379
--
0-DAY CI Kernel Test Service
https://01.org/lkp
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 3/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
@ 2022-09-02 19:46 kernel test robot
0 siblings, 0 replies; 29+ messages in thread
From: kernel test robot @ 2022-09-02 19:46 UTC (permalink / raw)
To: kbuild
[-- Attachment #1: Type: text/plain, Size: 9251 bytes --]
::::::
:::::: Manual check reason: "low confidence static check first_new_problem: arch/arc/include/asm/io.h:149:20: sparse: void static inline [gnu_inline] [toplevel] __raw_writel( ... )"
::::::
BCC: lkp(a)intel.com
CC: kbuild-all(a)lists.01.org
In-Reply-To: <20220901110657.3305-4-jslaby@suse.cz>
References: <20220901110657.3305-4-jslaby@suse.cz>
TO: Jiri Slaby <jslaby@suse.cz>
Hi Jiri,
I love your patch! Perhaps something to improve:
[auto build test WARNING on tty/tty-testing]
[also build test WARNING on usb/usb-testing shawnguo/for-next linus/master v6.0-rc3 next-20220901]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Jiri-Slaby/tty-TX-helpers/20220901-190806
base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-testing
:::::: branch date: 33 hours ago
:::::: commit date: 33 hours ago
config: arc-randconfig-s032-20220901
compiler: arceb-elf-gcc (GCC) 12.1.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-39-gce1a6720-dirty
# https://github.com/intel-lab-lkp/linux/commit/f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Jiri-Slaby/tty-TX-helpers/20220901-190806
git checkout f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=arc SHELL=/bin/bash drivers/tty/serial/
If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ;
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got &&
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got --
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got {
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got (
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got {
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got (
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got <
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ==
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol '__raw_writel' redeclared with different type (different argument counts):
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int static [signed] [toplevel] __raw_writel( ... )
drivers/tty/serial/altera_jtaguart.c: note: in included file (through include/linux/io.h, include/linux/irq.h, include/asm-generic/hardirq.h, ...):
arch/arc/include/asm/io.h:149:20: sparse: note: previously declared as:
>> arch/arc/include/asm/io.h:149:20: sparse: void static inline [gnu_inline] [toplevel] __raw_writel( ... )
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: note: previously declared as:
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol '__raw_writel' redeclared with different type (different argument counts):
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int static [signed] [toplevel] __raw_writel( ... )
arch/arc/include/asm/io.h:149:20: sparse: note: previously declared as:
>> arch/arc/include/asm/io.h:149:20: sparse: void static inline [gnu_inline] [toplevel] __raw_writel( ... )
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: note: previously declared as:
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: unsigned int [addressable] [toplevel] pending
drivers/tty/serial/altera_jtaguart.c:150:36: sparse: sparse: too many arguments for function altera_jtaguart_do_tx_chars
drivers/tty/serial/altera_jtaguart.c:180:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/altera_jtaguart.c:202:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/altera_jtaguart.c:219:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/altera_jtaguart.c:293:9: sparse: sparse: too many arguments for function __raw_writel
vim +149 arch/arc/include/asm/io.h
1162b0701b14ba Vineet Gupta 2013-01-18 147
1162b0701b14ba Vineet Gupta 2013-01-18 148 #define __raw_writel __raw_writel
1162b0701b14ba Vineet Gupta 2013-01-18 @149 static inline void __raw_writel(u32 w, volatile void __iomem *addr)
1162b0701b14ba Vineet Gupta 2013-01-18 150 {
1162b0701b14ba Vineet Gupta 2013-01-18 151 __asm__ __volatile__(
1162b0701b14ba Vineet Gupta 2013-01-18 152 " st%U1 %0, %1 \n"
1162b0701b14ba Vineet Gupta 2013-01-18 153 :
1162b0701b14ba Vineet Gupta 2013-01-18 154 : "r" (w), "m" (*(volatile u32 __force *)addr)
1162b0701b14ba Vineet Gupta 2013-01-18 155 : "memory");
1162b0701b14ba Vineet Gupta 2013-01-18 156
--
0-DAY CI Kernel Test Service
https://01.org/lkp
[-- Attachment #2: config.ksh --]
[-- Type: text/plain, Size: 115681 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/arc 6.0.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="arceb-elf-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
CONFIG_BPF=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# end of BPF subsystem
CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
# CONFIG_CPU_ISOLATION is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
# CONFIG_FORCE_TASKS_RCU is not set
# CONFIG_FORCE_TASKS_RUDE_RCU is not set
# CONFIG_FORCE_TASKS_TRACE_RCU is not set
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=2
# CONFIG_RCU_NOCB_CPU is not set
# CONFIG_TASKS_TRACE_RCU_READ_MB is not set
# end of RCU Subsystem
# CONFIG_IKCONFIG is not set
CONFIG_IKHEADERS=m
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_GENERIC_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
# CONFIG_MEMCG is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_BPF is not set
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_RD_ZSTD is not set
CONFIG_BOOT_CONFIG=y
# CONFIG_BOOT_CONFIG_EMBED is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EXPERT is not set
CONFIG_MULTIUSER=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# end of Kernel Performance Events And Counters
CONFIG_PROFILING=y
# end of General setup
CONFIG_ARC=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_CSUM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_MMU=y
CONFIG_NO_IOPORT_MAP=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_STACKTRACE_SUPPORT=y
#
# ARC Architecture Configuration
#
#
# ARC Platform/SoC/Board
#
# CONFIG_ARC_PLAT_TB10X is not set
# CONFIG_ARC_PLAT_AXS10X is not set
# CONFIG_ARC_SOC_HSDK is not set
# end of ARC Platform/SoC/Board
# CONFIG_ISA_ARCOMPACT is not set
CONFIG_ISA_ARCV2=y
#
# ARC CPU Configuration
#
CONFIG_ARC_CPU_HS=y
CONFIG_ARC_TUNE_MCPU=""
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
# CONFIG_ARC_SMP_HALT_ON_RESET is not set
CONFIG_ARC_MCIP=y
# CONFIG_ARC_CACHE is not set
# CONFIG_ARC_HAS_ICCM is not set
CONFIG_ARC_HAS_DCCM=y
CONFIG_ARC_DCCM_SZ=64
CONFIG_ARC_DCCM_BASE=0xA0000000
CONFIG_ARC_MMU_V4=y
CONFIG_ARC_PAGE_SIZE_8K=y
# CONFIG_ARC_PAGE_SIZE_16K is not set
# CONFIG_ARC_PAGE_SIZE_4K is not set
CONFIG_PGTABLE_LEVELS=2
CONFIG_ARC_FPU_SAVE_RESTORE=y
CONFIG_ARC_HAS_LLSC=y
# CONFIG_ARC_HAS_SWAPE is not set
# CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS is not set
CONFIG_ARC_HAS_LL64=y
# CONFIG_ARC_HAS_DIV_REM is not set
CONFIG_ARC_HAS_ACCL_REGS=y
CONFIG_ARC_DSP_HANDLED=y
# CONFIG_ARC_DSP_NONE is not set
CONFIG_ARC_DSP_KERNEL=y
# CONFIG_ARC_DSP_USERSPACE is not set
# CONFIG_ARC_DSP_AGU_USERSPACE is not set
CONFIG_ARC_IRQ_NO_AUTOSAVE=y
# CONFIG_ARC_LPB_DISABLE is not set
# end of ARC CPU Configuration
CONFIG_LINUX_LINK_BASE=0x80000000
CONFIG_LINUX_RAM_BASE=0x80000000
CONFIG_HIGHMEM=y
# CONFIG_ARC_HAS_PAE40 is not set
CONFIG_ARC_KVADDR_SIZE=256
# CONFIG_ARC_CURR_IN_REG is not set
CONFIG_HZ=100
# CONFIG_ARC_METAWARE_HLINK is not set
CONFIG_ARC_DBG=y
# CONFIG_ARC_DW2_UNWIND is not set
CONFIG_ARC_DBG_JUMP_LABEL=y
CONFIG_ARC_BUILTIN_DTB_NAME=""
# end of ARC Architecture Configuration
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
#
# General architecture-dependent options
#
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_CLONE_BACKWARDS=y
# CONFIG_COMPAT_32BIT_TIME is not set
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
# end of GCOV-based kernel profiling
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
# CONFIG_BLK_SED_OPAL is not set
CONFIG_BLK_INLINE_ENCRYPTION=y
# CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=m
CONFIG_IOSCHED_BFQ=m
# end of IO Schedulers
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
# CONFIG_BINFMT_ELF is not set
# CONFIG_BINFMT_SCRIPT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
# CONFIG_SWAP is not set
#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLAB_MERGE_DEFAULT is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_SLUB_CPU_PARTIAL is not set
# end of SLAB allocator options
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_FLATMEM=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
# CONFIG_COMPACTION is not set
CONFIG_PAGE_REPORTING=y
CONFIG_BOUNCE=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CMA is not set
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_KMAP_LOCAL=y
# CONFIG_ANON_VMA_NAME is not set
CONFIG_USERFAULTFD=y
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
# CONFIG_NET is not set
#
# Device Drivers
#
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
#
# PC-card bridges
#
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
# CONFIG_HISILICON_LPC is not set
# CONFIG_INTEL_IXP4XX_EB is not set
# CONFIG_QCOM_EBI2 is not set
CONFIG_MHI_BUS=y
# CONFIG_MHI_BUS_DEBUG is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# CONFIG_ARM_SCMI_PROTOCOL is not set
CONFIG_ARM_SCMI_POWER_DOMAIN=y
# CONFIG_ARM_SCMI_POWER_CONTROL is not set
# end of ARM System Control and Management Interface Protocol
CONFIG_ARM_SCPI_POWER_DOMAIN=y
# CONFIG_BCM47XX_NVRAM is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_GNSS=y
CONFIG_MTD=m
CONFIG_MTD_TESTS=m
#
# Partition parsers
#
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_MTD_BCM63XX_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=m
CONFIG_MTD_OF_PARTS=m
# CONFIG_MTD_OF_PARTS_BCM4908 is not set
# CONFIG_MTD_OF_PARTS_LINKSYS_NS is not set
# CONFIG_MTD_PARSER_IMAGETAG is not set
# CONFIG_MTD_PARSER_TRX is not set
# CONFIG_MTD_SHARPSL_PARTS is not set
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# end of Partition parsers
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK.
#
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=m
CONFIG_MTD_PARTITIONED_MASTER=y
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=m
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_PHYSMAP_BT1_ROM is not set
# CONFIG_MTD_PHYSMAP_VERSATILE is not set
# CONFIG_MTD_PHYSMAP_GEMINI is not set
# CONFIG_MTD_PHYSMAP_GPIO_ADDR is not set
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_TS5500 is not set
# CONFIG_MTD_PCMCIA is not set
CONFIG_MTD_PLATRAM=m
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#
CONFIG_MTD_SPEAR_SMI=m
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers
#
# NAND
#
CONFIG_MTD_NAND_CORE=m
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_RAW_NAND=m
#
# Raw/parallel NAND flash controllers
#
# CONFIG_MTD_NAND_DENALI_DT is not set
CONFIG_MTD_NAND_AMS_DELTA=m
# CONFIG_MTD_NAND_SHARPSL is not set
# CONFIG_MTD_NAND_ATMEL is not set
# CONFIG_MTD_NAND_MARVELL is not set
# CONFIG_MTD_NAND_SLC_LPC32XX is not set
# CONFIG_MTD_NAND_MLC_LPC32XX is not set
# CONFIG_MTD_NAND_BRCMNAND is not set
# CONFIG_MTD_NAND_OXNAS is not set
# CONFIG_MTD_NAND_FSL_IFC is not set
# CONFIG_MTD_NAND_VF610_NFC is not set
# CONFIG_MTD_NAND_MXC is not set
# CONFIG_MTD_NAND_SH_FLCTL is not set
# CONFIG_MTD_NAND_DAVINCI is not set
# CONFIG_MTD_NAND_TXX9NDFMC is not set
# CONFIG_MTD_NAND_FSMC is not set
# CONFIG_MTD_NAND_SUNXI is not set
# CONFIG_MTD_NAND_HISI504 is not set
# CONFIG_MTD_NAND_QCOM is not set
# CONFIG_MTD_NAND_MXIC is not set
# CONFIG_MTD_NAND_TEGRA is not set
# CONFIG_MTD_NAND_STM32_FMC2 is not set
# CONFIG_MTD_NAND_MESON is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_PLATFORM=m
# CONFIG_MTD_NAND_CADENCE is not set
# CONFIG_MTD_NAND_ARASAN is not set
# CONFIG_MTD_NAND_INTEL_LGM is not set
# CONFIG_MTD_NAND_RENESAS is not set
#
# Misc
#
# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_DISKONCHIP=m
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH is not set
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
CONFIG_MTD_NAND_ECC_SW_BCH=y
# CONFIG_MTD_NAND_ECC_MXIC is not set
# CONFIG_MTD_NAND_ECC_MEDIATEK is not set
# end of ECC engine support
# end of NAND
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
# end of LPDDR & LPDDR2 PCM memory drivers
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
CONFIG_MTD_HYPERBUS=m
# CONFIG_HBMC_AM654 is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
# CONFIG_OF_ALL_DTBS is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=y
CONFIG_CDROM=y
# CONFIG_ZRAM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
#
# DRBD disabled because PROC_FS or INET not selected
#
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_UBLK is not set
#
# NVME Support
#
CONFIG_NVME_CORE=y
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_VERBOSE_ERRORS is not set
# CONFIG_NVME_HWMON is not set
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
# CONFIG_NVME_AUTH is not set
CONFIG_NVME_TARGET=m
CONFIG_NVME_TARGET_PASSTHRU=y
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_FC=m
CONFIG_NVME_TARGET_FCLOOP=m
# CONFIG_NVME_TARGET_AUTH is not set
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
CONFIG_ICS932S401=m
# CONFIG_ATMEL_SSC is not set
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_HI6421V600_IRQ is not set
# CONFIG_QCOM_COINCELL is not set
# CONFIG_QCOM_FASTRPC is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1770 is not set
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
CONFIG_SRAM=y
CONFIG_XILINX_SDFEC=y
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_EEPROM_IDT_89HPESX=m
CONFIG_EEPROM_EE1004=m
# end of EEPROM support
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module (requires I2C)
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_ECHO is not set
CONFIG_UACCE=m
# CONFIG_PVPANIC is not set
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=y
# CONFIG_CHR_DEV_SG is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
# CONFIG_SCSI_SAS_HOST_SMP is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# end of SCSI device support
CONFIG_ATA=m
CONFIG_SATA_HOST=y
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_ATA_FORCE=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_AHCI_BRCM is not set
# CONFIG_AHCI_DA850 is not set
# CONFIG_AHCI_DM816 is not set
# CONFIG_AHCI_IMX is not set
# CONFIG_AHCI_CEVA is not set
# CONFIG_AHCI_MTK is not set
# CONFIG_AHCI_MVEBU is not set
# CONFIG_AHCI_SUNXI is not set
# CONFIG_AHCI_TEGRA is not set
# CONFIG_AHCI_XGENE is not set
CONFIG_AHCI_QORIQ=m
# CONFIG_SATA_FSL is not set
# CONFIG_SATA_GEMINI is not set
# CONFIG_SATA_AHCI_SEATTLE is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_ATA_BMDMA is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_IXP4XX_CF is not set
CONFIG_PATA_PCMCIA=m
# CONFIG_PATA_SAMSUNG_CF is not set
#
# Generic fallback / legacy drivers
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
CONFIG_BCACHE_CLOSURES_DEBUG=y
# CONFIG_BCACHE_ASYNC_REGISTRATION is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_TARGET_CORE is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# end of IEEE 1394 (FireWire) support
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_SPARSEKMAP is not set
CONFIG_INPUT_MATRIXKMAP=y
CONFIG_INPUT_VIVALDIFMAP=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5588=m
CONFIG_KEYBOARD_ADP5589=m
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
CONFIG_KEYBOARD_QT1070=m
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_CLPS711X is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
CONFIG_KEYBOARD_LKKBD=y
# CONFIG_KEYBOARD_EP93XX is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
CONFIG_KEYBOARD_LM8323=m
CONFIG_KEYBOARD_LM8333=m
CONFIG_KEYBOARD_MAX7359=m
CONFIG_KEYBOARD_MCS=m
CONFIG_KEYBOARD_MPR121=m
# CONFIG_KEYBOARD_SNVS_PWRKEY is not set
# CONFIG_KEYBOARD_IMX is not set
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_OPENCORES=y
CONFIG_KEYBOARD_SAMSUNG=m
# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
CONFIG_KEYBOARD_STOWAWAY=m
# CONFIG_KEYBOARD_ST_KEYSCAN is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
CONFIG_KEYBOARD_IQS62X=m
# CONFIG_KEYBOARD_OMAP4 is not set
CONFIG_KEYBOARD_TM2_TOUCHKEY=m
CONFIG_KEYBOARD_XTKBD=y
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
# CONFIG_KEYBOARD_MT6779 is not set
# CONFIG_KEYBOARD_MTK_PMIC is not set
# CONFIG_KEYBOARD_CYPRESS_SF is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
# CONFIG_JOYSTICK_ADI is not set
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=m
# CONFIG_JOYSTICK_INTERACT is not set
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
# CONFIG_JOYSTICK_IFORCE is not set
CONFIG_JOYSTICK_WARRIOR=m
# CONFIG_JOYSTICK_MAGELLAN is not set
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=m
# CONFIG_JOYSTICK_QWIIC is not set
# CONFIG_JOYSTICK_FSIA6B is not set
# CONFIG_JOYSTICK_SENSEHAT is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=m
# CONFIG_RMI4_I2C is not set
CONFIG_RMI4_SMB=m
# CONFIG_RMI4_F03 is not set
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
# CONFIG_RMI4_F3A is not set
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=m
CONFIG_SERIO_APBPS2=m
# CONFIG_SERIO_OLPC_APSP is not set
# CONFIG_SERIO_SUN4I_PS2 is not set
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=m
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_16550A_VARIANTS=y
# CONFIG_SERIAL_8250_FINTEK is not set
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_MEN_MCB is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_ASPEED_VUART=m
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_RSA is not set
CONFIG_SERIAL_8250_DWLIB=y
# CONFIG_SERIAL_8250_BCM2835AUX is not set
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_EM is not set
# CONFIG_SERIAL_8250_IOC3 is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_OMAP is not set
# CONFIG_SERIAL_8250_LPC18XX is not set
# CONFIG_SERIAL_8250_MT6577 is not set
# CONFIG_SERIAL_8250_UNIPHIER is not set
# CONFIG_SERIAL_8250_INGENIC is not set
# CONFIG_SERIAL_8250_PXA is not set
CONFIG_SERIAL_8250_TEGRA=y
# CONFIG_SERIAL_8250_BCM7271 is not set
CONFIG_SERIAL_OF_PLATFORM=m
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set
# CONFIG_SERIAL_ATMEL is not set
# CONFIG_SERIAL_MESON is not set
# CONFIG_SERIAL_CLPS711X is not set
# CONFIG_SERIAL_SAMSUNG is not set
# CONFIG_SERIAL_TEGRA is not set
# CONFIG_SERIAL_IMX is not set
# CONFIG_SERIAL_IMX_EARLYCON is not set
# CONFIG_SERIAL_UARTLITE is not set
# CONFIG_SERIAL_SH_SCI is not set
# CONFIG_SERIAL_HS_LPC32XX is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_MSM is not set
# CONFIG_SERIAL_VT8500 is not set
# CONFIG_SERIAL_OMAP is not set
CONFIG_SERIAL_SIFIVE=m
# CONFIG_SERIAL_LANTIQ is not set
CONFIG_SERIAL_SCCNXP=m
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_BCM63XX is not set
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS=y
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
# CONFIG_SERIAL_MXS_AUART is not set
CONFIG_SERIAL_XILINX_PS_UART=y
# CONFIG_SERIAL_XILINX_PS_UART_CONSOLE is not set
# CONFIG_SERIAL_MPS2_UART is not set
# CONFIG_SERIAL_ARC is not set
CONFIG_SERIAL_FSL_LPUART=m
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set
CONFIG_SERIAL_FSL_LINFLEXUART=y
# CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE is not set
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
# CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE is not set
# CONFIG_SERIAL_ST_ASC is not set
CONFIG_SERIAL_MEN_Z135=y
CONFIG_SERIAL_SPRD=y
CONFIG_SERIAL_SPRD_CONSOLE=y
# CONFIG_SERIAL_STM32 is not set
# CONFIG_SERIAL_MVEBU_UART is not set
# CONFIG_SERIAL_OWL is not set
# CONFIG_SERIAL_RDA is not set
# CONFIG_SERIAL_MILBEAUT_USIO is not set
# CONFIG_SERIAL_LITEUART is not set
# CONFIG_SERIAL_SUNPLUS is not set
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_N_HDLC=m
CONFIG_NULL_TTY=m
CONFIG_HVC_DRIVER=y
# CONFIG_RPMSG_TTY is not set
# CONFIG_SERIAL_DEV_BUS is not set
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=y
CONFIG_IPMI_SSIF=m
# CONFIG_IPMI_IPMB is not set
CONFIG_IPMI_WATCHDOG=m
# CONFIG_IPMI_POWEROFF is not set
# CONFIG_ASPEED_KCS_IPMI_BMC is not set
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
# CONFIG_ASPEED_BT_IPMI_BMC is not set
# CONFIG_IPMB_DEVICE_INTERFACE is not set
# CONFIG_HW_RANDOM is not set
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_SCR24X=m
# end of PCMCIA character devices
CONFIG_DEVMEM=y
CONFIG_TCG_TPM=m
# CONFIG_TCG_TIS is not set
# CONFIG_TCG_TIS_I2C is not set
# CONFIG_TCG_TIS_SYNQUACER is not set
# CONFIG_TCG_TIS_I2C_CR50 is not set
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
CONFIG_TCG_TIS_I2C_NUVOTON=m
# CONFIG_TCG_VTPM_PROXY is not set
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
CONFIG_XILLYBUS_CLASS=m
CONFIG_XILLYBUS=m
CONFIG_XILLYBUS_OF=m
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_GPMUX=m
# CONFIG_I2C_MUX_LTC4306 is not set
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
# CONFIG_I2C_MUX_PINCTRL is not set
CONFIG_I2C_MUX_REG=m
CONFIG_I2C_DEMUX_PINCTRL=m
# CONFIG_I2C_MUX_MLXCPLD is not set
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_HIX5HD2 is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_ALTERA is not set
# CONFIG_I2C_ASPEED is not set
# CONFIG_I2C_AT91 is not set
# CONFIG_I2C_AXXIA is not set
# CONFIG_I2C_BCM2835 is not set
# CONFIG_I2C_BCM_IPROC is not set
# CONFIG_I2C_BCM_KONA is not set
CONFIG_I2C_BRCMSTB=m
# CONFIG_I2C_CADENCE is not set
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DAVINCI is not set
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_SLAVE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_DIGICOLOR is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_EXYNOS5 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_HIGHLANDER is not set
# CONFIG_I2C_HISI is not set
# CONFIG_I2C_IMG is not set
# CONFIG_I2C_IMX is not set
# CONFIG_I2C_IMX_LPI2C is not set
# CONFIG_I2C_IOP3XX is not set
# CONFIG_I2C_JZ4780 is not set
# CONFIG_I2C_LPC2K is not set
# CONFIG_I2C_MESON is not set
# CONFIG_I2C_MICROCHIP_CORE is not set
# CONFIG_I2C_MT65XX is not set
# CONFIG_I2C_MT7621 is not set
# CONFIG_I2C_MV64XXX is not set
# CONFIG_I2C_MXS is not set
# CONFIG_I2C_NPCM is not set
CONFIG_I2C_OCORES=m
# CONFIG_I2C_OMAP is not set
# CONFIG_I2C_OWL is not set
# CONFIG_I2C_APPLE is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PNX is not set
# CONFIG_I2C_PXA is not set
# CONFIG_I2C_QCOM_CCI is not set
# CONFIG_I2C_QUP is not set
# CONFIG_I2C_RIIC is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_RZV2M is not set
# CONFIG_I2C_S3C2410 is not set
# CONFIG_I2C_SH_MOBILE is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_ST is not set
# CONFIG_I2C_STM32F4 is not set
# CONFIG_I2C_STM32F7 is not set
# CONFIG_I2C_SUN6I_P2WI is not set
# CONFIG_I2C_SYNQUACER is not set
# CONFIG_I2C_TEGRA is not set
# CONFIG_I2C_TEGRA_BPMP is not set
# CONFIG_I2C_UNIPHIER is not set
# CONFIG_I2C_UNIPHIER_F is not set
# CONFIG_I2C_VERSATILE is not set
# CONFIG_I2C_WMT is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_XLP9XX is not set
# CONFIG_I2C_RCAR is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_TAOS_EVM=m
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
CONFIG_I2C_FSI=m
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support
# CONFIG_I2C_STUB is not set
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
# CONFIG_I2C_SLAVE_TESTUNIT is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
CONFIG_I3C=m
# CONFIG_CDNS_I3C_MASTER is not set
CONFIG_DW_I3C_MASTER=m
# CONFIG_SVC_I3C_MASTER is not set
# CONFIG_MIPI_I3C_HCI is not set
# CONFIG_SPI is not set
CONFIG_SPMI=m
CONFIG_SPMI_HISI3670=m
# CONFIG_SPMI_MSM_PMIC_ARB is not set
# CONFIG_SPMI_MTK_PMIF is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=y
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y
# CONFIG_NTP_PPS is not set
#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=m
CONFIG_PPS_CLIENT_LDISC=m
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_AT91PIO4 is not set
CONFIG_PINCTRL_AXP209=m
# CONFIG_PINCTRL_BM1880 is not set
# CONFIG_PINCTRL_DA850_PUPD is not set
# CONFIG_PINCTRL_EQUILIBRIUM is not set
# CONFIG_PINCTRL_INGENIC is not set
# CONFIG_PINCTRL_LPC18XX is not set
CONFIG_PINCTRL_MCP23S08_I2C=m
CONFIG_PINCTRL_MCP23S08=m
# CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
# CONFIG_PINCTRL_OCELOT is not set
# CONFIG_PINCTRL_PISTACHIO is not set
CONFIG_PINCTRL_RK805=m
# CONFIG_PINCTRL_ROCKCHIP is not set
# CONFIG_PINCTRL_SINGLE is not set
# CONFIG_PINCTRL_STARFIVE is not set
# CONFIG_PINCTRL_STMFX is not set
# CONFIG_PINCTRL_OWL is not set
# CONFIG_PINCTRL_ASPEED_G4 is not set
# CONFIG_PINCTRL_ASPEED_G5 is not set
# CONFIG_PINCTRL_ASPEED_G6 is not set
# CONFIG_PINCTRL_BCM281XX is not set
# CONFIG_PINCTRL_BCM2835 is not set
# CONFIG_PINCTRL_BCM4908 is not set
# CONFIG_PINCTRL_BCM6318 is not set
# CONFIG_PINCTRL_BCM6328 is not set
# CONFIG_PINCTRL_BCM6358 is not set
# CONFIG_PINCTRL_BCM6362 is not set
# CONFIG_PINCTRL_BCM6368 is not set
# CONFIG_PINCTRL_BCM63268 is not set
# CONFIG_PINCTRL_IPROC_GPIO is not set
# CONFIG_PINCTRL_CYGNUS_MUX is not set
# CONFIG_PINCTRL_NS is not set
# CONFIG_PINCTRL_NSP_GPIO is not set
# CONFIG_PINCTRL_NS2_MUX is not set
# CONFIG_PINCTRL_NSP_MUX is not set
# CONFIG_PINCTRL_AS370 is not set
# CONFIG_PINCTRL_BERLIN_BG4CT is not set
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L15=y
CONFIG_PINCTRL_CS47L85=y
#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers
#
# MediaTek pinctrl drivers
#
# CONFIG_EINT_MTK is not set
# CONFIG_PINCTRL_MT2701 is not set
# CONFIG_PINCTRL_MT7623 is not set
# CONFIG_PINCTRL_MT7629 is not set
# CONFIG_PINCTRL_MT8135 is not set
# CONFIG_PINCTRL_MT8127 is not set
# CONFIG_PINCTRL_MT2712 is not set
# CONFIG_PINCTRL_MT6765 is not set
# CONFIG_PINCTRL_MT6779 is not set
# CONFIG_PINCTRL_MT6795 is not set
# CONFIG_PINCTRL_MT6797 is not set
# CONFIG_PINCTRL_MT7622 is not set
# CONFIG_PINCTRL_MT7986 is not set
# CONFIG_PINCTRL_MT8167 is not set
# CONFIG_PINCTRL_MT8173 is not set
# CONFIG_PINCTRL_MT8183 is not set
# CONFIG_PINCTRL_MT8186 is not set
# CONFIG_PINCTRL_MT8192 is not set
# CONFIG_PINCTRL_MT8195 is not set
# CONFIG_PINCTRL_MT8365 is not set
# CONFIG_PINCTRL_MT8516 is not set
# CONFIG_PINCTRL_MT6397 is not set
# end of MediaTek pinctrl drivers
CONFIG_PINCTRL_MESON=y
# CONFIG_PINCTRL_WPCM450 is not set
# CONFIG_PINCTRL_NPCM7XX is not set
# CONFIG_PINCTRL_PXA25X is not set
# CONFIG_PINCTRL_PXA27X is not set
# CONFIG_PINCTRL_MSM is not set
# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
# CONFIG_PINCTRL_LPASS_LPI is not set
#
# Renesas pinctrl drivers
#
# CONFIG_PINCTRL_RENESAS is not set
# CONFIG_PINCTRL_PFC_EMEV2 is not set
# CONFIG_PINCTRL_PFC_R8A77995 is not set
# CONFIG_PINCTRL_PFC_R8A7794 is not set
# CONFIG_PINCTRL_PFC_R8A77990 is not set
# CONFIG_PINCTRL_PFC_R8A7779 is not set
# CONFIG_PINCTRL_PFC_R8A7790 is not set
# CONFIG_PINCTRL_PFC_R8A77950 is not set
# CONFIG_PINCTRL_PFC_R8A77951 is not set
# CONFIG_PINCTRL_PFC_R8A7778 is not set
# CONFIG_PINCTRL_PFC_R8A7793 is not set
# CONFIG_PINCTRL_PFC_R8A7791 is not set
# CONFIG_PINCTRL_PFC_R8A77965 is not set
# CONFIG_PINCTRL_PFC_R8A77960 is not set
# CONFIG_PINCTRL_PFC_R8A77961 is not set
# CONFIG_PINCTRL_PFC_R8A779F0 is not set
# CONFIG_PINCTRL_PFC_R8A7792 is not set
# CONFIG_PINCTRL_PFC_R8A77980 is not set
# CONFIG_PINCTRL_PFC_R8A77970 is not set
# CONFIG_PINCTRL_PFC_R8A779A0 is not set
# CONFIG_PINCTRL_PFC_R8A779G0 is not set
# CONFIG_PINCTRL_PFC_R8A7740 is not set
# CONFIG_PINCTRL_PFC_R8A73A4 is not set
# CONFIG_PINCTRL_RZA1 is not set
# CONFIG_PINCTRL_RZA2 is not set
# CONFIG_PINCTRL_RZG2L is not set
# CONFIG_PINCTRL_PFC_R8A77470 is not set
# CONFIG_PINCTRL_PFC_R8A7745 is not set
# CONFIG_PINCTRL_PFC_R8A7742 is not set
# CONFIG_PINCTRL_PFC_R8A7743 is not set
# CONFIG_PINCTRL_PFC_R8A7744 is not set
# CONFIG_PINCTRL_PFC_R8A774C0 is not set
# CONFIG_PINCTRL_PFC_R8A774E1 is not set
# CONFIG_PINCTRL_PFC_R8A774A1 is not set
# CONFIG_PINCTRL_PFC_R8A774B1 is not set
# CONFIG_PINCTRL_RZN1 is not set
# CONFIG_PINCTRL_RZV2M is not set
# CONFIG_PINCTRL_PFC_SH7203 is not set
# CONFIG_PINCTRL_PFC_SH7264 is not set
# CONFIG_PINCTRL_PFC_SH7269 is not set
# CONFIG_PINCTRL_PFC_SH7720 is not set
# CONFIG_PINCTRL_PFC_SH7722 is not set
# CONFIG_PINCTRL_PFC_SH7734 is not set
# CONFIG_PINCTRL_PFC_SH7757 is not set
# CONFIG_PINCTRL_PFC_SH7785 is not set
# CONFIG_PINCTRL_PFC_SH7786 is not set
# CONFIG_PINCTRL_PFC_SH73A0 is not set
# CONFIG_PINCTRL_PFC_SH7723 is not set
# CONFIG_PINCTRL_PFC_SH7724 is not set
# CONFIG_PINCTRL_PFC_SHX3 is not set
# end of Renesas pinctrl drivers
# CONFIG_PINCTRL_EXYNOS is not set
# CONFIG_PINCTRL_S3C24XX is not set
# CONFIG_PINCTRL_S3C64XX is not set
# CONFIG_PINCTRL_SPRD_SC9860 is not set
# CONFIG_PINCTRL_STM32F429 is not set
# CONFIG_PINCTRL_STM32F469 is not set
# CONFIG_PINCTRL_STM32F746 is not set
# CONFIG_PINCTRL_STM32F769 is not set
# CONFIG_PINCTRL_STM32H743 is not set
# CONFIG_PINCTRL_STM32MP135 is not set
# CONFIG_PINCTRL_STM32MP157 is not set
# CONFIG_PINCTRL_TI_IODELAY is not set
CONFIG_PINCTRL_UNIPHIER=y
# CONFIG_PINCTRL_UNIPHIER_LD4 is not set
# CONFIG_PINCTRL_UNIPHIER_PRO4 is not set
# CONFIG_PINCTRL_UNIPHIER_SLD8 is not set
# CONFIG_PINCTRL_UNIPHIER_PRO5 is not set
# CONFIG_PINCTRL_UNIPHIER_PXS2 is not set
# CONFIG_PINCTRL_UNIPHIER_LD6B is not set
# CONFIG_PINCTRL_UNIPHIER_LD11 is not set
# CONFIG_PINCTRL_UNIPHIER_LD20 is not set
# CONFIG_PINCTRL_UNIPHIER_PXS3 is not set
# CONFIG_PINCTRL_UNIPHIER_NX1 is not set
# CONFIG_PINCTRL_TMPV7700 is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=m
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=m
CONFIG_GPIO_ALTERA=m
# CONFIG_GPIO_ASPEED is not set
# CONFIG_GPIO_ASPEED_SGPIO is not set
# CONFIG_GPIO_ATH79 is not set
# CONFIG_GPIO_RASPBERRYPI_EXP is not set
# CONFIG_GPIO_BCM_KONA is not set
# CONFIG_GPIO_BCM_XGS_IPROC is not set
# CONFIG_GPIO_BRCMSTB is not set
CONFIG_GPIO_CADENCE=y
# CONFIG_GPIO_CLPS711X is not set
CONFIG_GPIO_DWAPB=m
# CONFIG_GPIO_EIC_SPRD is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_FTGPIO010 is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_HISI is not set
# CONFIG_GPIO_HLWD is not set
# CONFIG_GPIO_IOP is not set
CONFIG_GPIO_LOGICVC=y
# CONFIG_GPIO_LPC18XX is not set
# CONFIG_GPIO_LPC32XX is not set
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_MENZ127 is not set
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_MT7621 is not set
# CONFIG_GPIO_MXC is not set
# CONFIG_GPIO_MXS is not set
# CONFIG_GPIO_PMIC_EIC_SPRD is not set
# CONFIG_GPIO_PXA is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_RDA is not set
# CONFIG_GPIO_ROCKCHIP is not set
# CONFIG_GPIO_SAMA5D2_PIOBU is not set
CONFIG_GPIO_SIFIVE=y
# CONFIG_GPIO_SIOX is not set
# CONFIG_GPIO_SNPS_CREG is not set
# CONFIG_GPIO_SPRD is not set
# CONFIG_GPIO_STP_XWAY is not set
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_TEGRA is not set
# CONFIG_GPIO_TEGRA186 is not set
# CONFIG_GPIO_TS4800 is not set
# CONFIG_GPIO_UNIPHIER is not set
# CONFIG_GPIO_VISCONTI is not set
# CONFIG_GPIO_XGENE_SB is not set
CONFIG_GPIO_XILINX=y
# CONFIG_GPIO_XLP is not set
CONFIG_GPIO_AMD_FCH=m
# CONFIG_GPIO_IDT3243X is not set
# end of Memory mapped GPIO drivers
#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=m
CONFIG_GPIO_ADNP=m
CONFIG_GPIO_GW_PLD=m
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=m
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
CONFIG_GPIO_PCF857X=m
# CONFIG_GPIO_TPIC2810 is not set
# CONFIG_GPIO_TS4900 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
CONFIG_GPIO_ARIZONA=m
CONFIG_GPIO_BD9571MWV=m
CONFIG_GPIO_LP3943=m
# CONFIG_GPIO_MADERA is not set
CONFIG_GPIO_MAX77650=m
# CONFIG_GPIO_SL28CPLD is not set
CONFIG_GPIO_TPS65086=m
CONFIG_GPIO_TPS65218=m
# CONFIG_GPIO_TPS65912 is not set
# end of MFD GPIO expanders
#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=y
CONFIG_GPIO_MOCKUP=m
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers
CONFIG_W1=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_MXC is not set
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=m
CONFIG_W1_MASTER_SGI=m
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2405=m
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2805=y
CONFIG_W1_SLAVE_DS2430=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2438 is not set
CONFIG_W1_SLAVE_DS250X=m
# CONFIG_W1_SLAVE_DS2780 is not set
CONFIG_W1_SLAVE_DS2781=m
# CONFIG_W1_SLAVE_DS28E04 is not set
# CONFIG_W1_SLAVE_DS28E17 is not set
# end of 1-wire Slaves
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM1177=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7410=m
# CONFIG_SENSORS_ADT7411 is not set
CONFIG_SENSORS_ADT7462=m
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_AHT10 is not set
CONFIG_SENSORS_AS370=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_AXI_FAN_CONTROL=m
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ASPEED=m
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_BT1_PVT is not set
CONFIG_SENSORS_CORSAIR_CPRO=m
# CONFIG_SENSORS_CORSAIR_PSU is not set
# CONFIG_SENSORS_DRIVETEMP is not set
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_SPARX5 is not set
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GSC is not set
# CONFIG_SENSORS_MC13783_ADC is not set
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_FTSTEUTATES=m
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_HIH6130=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_POWR1220=m
# CONFIG_SENSORS_LAN966X is not set
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LTC2945=m
# CONFIG_SENSORS_LTC2947_I2C is not set
CONFIG_SENSORS_LTC2990=m
# CONFIG_SENSORS_LTC2992 is not set
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=m
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX127 is not set
CONFIG_SENSORS_MAX16065=m
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_MAX6697 is not set
CONFIG_SENSORS_MAX31790=m
# CONFIG_SENSORS_MCP3021 is not set
CONFIG_SENSORS_TC654=m
# CONFIG_SENSORS_TPS23861 is not set
CONFIG_SENSORS_MR75203=y
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM73=m
# CONFIG_SENSORS_LM75 is not set
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775_CORE=m
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT6775_I2C is not set
CONFIG_SENSORS_NCT7802=m
# CONFIG_SENSORS_NCT7904 is not set
CONFIG_SENSORS_NPCM7XX=m
# CONFIG_SENSORS_NSA320 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_OCC_P9_SBE is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1266=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_BEL_PFE=m
# CONFIG_SENSORS_BPA_RS600 is not set
# CONFIG_SENSORS_DELTA_AHE50DC_FAN is not set
# CONFIG_SENSORS_FSP_3Y is not set
# CONFIG_SENSORS_IBM_CFFPS is not set
# CONFIG_SENSORS_DPS920AB is not set
CONFIG_SENSORS_INSPUR_IPSPS=m
# CONFIG_SENSORS_IR35221 is not set
# CONFIG_SENSORS_IR36021 is not set
CONFIG_SENSORS_IR38064=m
# CONFIG_SENSORS_IR38064_REGULATOR is not set
# CONFIG_SENSORS_IRPS5401 is not set
CONFIG_SENSORS_ISL68137=m
CONFIG_SENSORS_LM25066=m
# CONFIG_SENSORS_LM25066_REGULATOR is not set
# CONFIG_SENSORS_LT7182S is not set
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=m
# CONFIG_SENSORS_MAX15301 is not set
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX16601 is not set
# CONFIG_SENSORS_MAX20730 is not set
CONFIG_SENSORS_MAX20751=m
CONFIG_SENSORS_MAX31785=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_MP2888 is not set
CONFIG_SENSORS_MP2975=m
# CONFIG_SENSORS_MP5023 is not set
# CONFIG_SENSORS_PIM4328 is not set
# CONFIG_SENSORS_PLI1209BC is not set
# CONFIG_SENSORS_PM6764TR is not set
# CONFIG_SENSORS_PXE1610 is not set
# CONFIG_SENSORS_Q54SJ108A2 is not set
# CONFIG_SENSORS_STPDDC60 is not set
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_TPS53679=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
# CONFIG_SENSORS_XDPE152 is not set
# CONFIG_SENSORS_XDPE122 is not set
CONFIG_SENSORS_ZL6100=m
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
# CONFIG_SENSORS_SL28CPLD is not set
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SHT3x=m
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SY7636A is not set
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_SCH56XX_COMMON=m
# CONFIG_SENSORS_SCH5627 is not set
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
CONFIG_SENSORS_ADC128D818=m
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_INA209=m
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA238 is not set
CONFIG_SENSORS_INA3221=m
CONFIG_SENSORS_TC74=m
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
CONFIG_SENSORS_TMP103=m
CONFIG_SENSORS_TMP108=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_TMP464 is not set
CONFIG_SENSORS_TMP513=m
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_W83773G=m
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=y
CONFIG_THERMAL=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
# CONFIG_THERMAL_HWMON is not set
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_CPU_THERMAL is not set
# CONFIG_DEVFREQ_THERMAL is not set
CONFIG_THERMAL_EMULATION=y
CONFIG_THERMAL_MMIO=y
CONFIG_HISI_THERMAL=y
# CONFIG_IMX_THERMAL is not set
# CONFIG_IMX8MM_THERMAL is not set
# CONFIG_K3_THERMAL is not set
# CONFIG_QORIQ_THERMAL is not set
# CONFIG_SPEAR_THERMAL is not set
# CONFIG_SUN8I_THERMAL is not set
# CONFIG_ROCKCHIP_THERMAL is not set
# CONFIG_RCAR_THERMAL is not set
# CONFIG_RCAR_GEN3_THERMAL is not set
# CONFIG_RZG2L_THERMAL is not set
# CONFIG_KIRKWOOD_THERMAL is not set
# CONFIG_DOVE_THERMAL is not set
# CONFIG_ARMADA_THERMAL is not set
# CONFIG_DA9062_THERMAL is not set
CONFIG_MTK_THERMAL=y
#
# Intel thermal drivers
#
#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
# end of Intel thermal drivers
#
# Broadcom thermal drivers
#
# CONFIG_BCM2711_THERMAL is not set
# CONFIG_BCM2835_THERMAL is not set
# CONFIG_BRCMSTB_THERMAL is not set
# CONFIG_BCM_NS_THERMAL is not set
# CONFIG_BCM_SR_THERMAL is not set
# end of Broadcom thermal drivers
#
# Texas Instruments thermal drivers
#
# CONFIG_TI_SOC_THERMAL is not set
# end of Texas Instruments thermal drivers
#
# Samsung thermal drivers
#
# CONFIG_EXYNOS_THERMAL is not set
# end of Samsung thermal drivers
#
# NVIDIA Tegra thermal drivers
#
# CONFIG_TEGRA_SOCTHERM is not set
# CONFIG_TEGRA_BPMP_THERMAL is not set
# CONFIG_TEGRA30_TSENSOR is not set
# end of NVIDIA Tegra thermal drivers
#
# Qualcomm thermal drivers
#
# end of Qualcomm thermal drivers
# CONFIG_UNIPHIER_THERMAL is not set
# CONFIG_SPRD_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is not set
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
# CONFIG_WATCHDOG_SYSFS is not set
# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set
#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m
# CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP is not set
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=m
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_SOFT_WATCHDOG_PRETIMEOUT is not set
# CONFIG_DA9052_WATCHDOG is not set
# CONFIG_DA9055_WATCHDOG is not set
# CONFIG_DA9063_WATCHDOG is not set
# CONFIG_DA9062_WATCHDOG is not set
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_MENF21BMC_WATCHDOG is not set
# CONFIG_MENZ069_WATCHDOG is not set
CONFIG_XILINX_WATCHDOG=y
CONFIG_ZIIRAVE_WATCHDOG=m
# CONFIG_SL28CPLD_WATCHDOG is not set
# CONFIG_ARMADA_37XX_WATCHDOG is not set
# CONFIG_ASM9260_WATCHDOG is not set
# CONFIG_AT91RM9200_WATCHDOG is not set
# CONFIG_AT91SAM9X_WATCHDOG is not set
# CONFIG_SAMA5D4_WATCHDOG is not set
CONFIG_CADENCE_WATCHDOG=m
# CONFIG_FTWDT010_WATCHDOG is not set
# CONFIG_S3C2410_WATCHDOG is not set
CONFIG_DW_WATCHDOG=y
# CONFIG_EP93XX_WATCHDOG is not set
# CONFIG_OMAP_WATCHDOG is not set
# CONFIG_PNX4008_WATCHDOG is not set
# CONFIG_DAVINCI_WATCHDOG is not set
# CONFIG_K3_RTI_WATCHDOG is not set
# CONFIG_RN5T618_WATCHDOG is not set
# CONFIG_SUNXI_WATCHDOG is not set
# CONFIG_NPCM7XX_WATCHDOG is not set
# CONFIG_STMP3XXX_RTC_WATCHDOG is not set
# CONFIG_TS4800_WATCHDOG is not set
# CONFIG_TS72XX_WATCHDOG is not set
CONFIG_MAX63XX_WATCHDOG=m
# CONFIG_MAX77620_WATCHDOG is not set
# CONFIG_IMX2_WDT is not set
# CONFIG_IMX7ULP_WDT is not set
# CONFIG_RETU_WATCHDOG is not set
# CONFIG_MOXART_WDT is not set
# CONFIG_ST_LPC_WATCHDOG is not set
# CONFIG_TEGRA_WATCHDOG is not set
# CONFIG_QCOM_WDT is not set
# CONFIG_MESON_GXBB_WATCHDOG is not set
# CONFIG_MESON_WATCHDOG is not set
# CONFIG_MEDIATEK_WATCHDOG is not set
# CONFIG_DIGICOLOR_WATCHDOG is not set
# CONFIG_LPC18XX_WATCHDOG is not set
# CONFIG_RENESAS_WDT is not set
# CONFIG_RENESAS_RZAWDT is not set
# CONFIG_RENESAS_RZN1WDT is not set
# CONFIG_RENESAS_RZG2LWDT is not set
# CONFIG_ASPEED_WATCHDOG is not set
# CONFIG_UNIPHIER_WATCHDOG is not set
# CONFIG_RTD119X_WATCHDOG is not set
# CONFIG_REALTEK_OTTO_WDT is not set
# CONFIG_SPRD_WATCHDOG is not set
# CONFIG_VISCONTI_WATCHDOG is not set
# CONFIG_MSC313E_WATCHDOG is not set
# CONFIG_APPLE_WATCHDOG is not set
# CONFIG_SUNPLUS_WATCHDOG is not set
# CONFIG_SC520_WDT is not set
# CONFIG_BCM47XX_WDT is not set
# CONFIG_BCM2835_WDT is not set
# CONFIG_BCM_KONA_WDT is not set
# CONFIG_BCM7038_WDT is not set
# CONFIG_IMGPDC_WDT is not set
# CONFIG_MPC5200_WDT is not set
# CONFIG_MEN_A21_WDT is not set
# CONFIG_UML_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
CONFIG_BCMA_HOST_SOC=y
# CONFIG_BCMA_DRIVER_MIPS is not set
# CONFIG_BCMA_SFLASH is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=m
# CONFIG_MFD_SUN4I_GPADC is not set
# CONFIG_MFD_AT91_USART is not set
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=m
# CONFIG_MFD_BCM590XX is not set
CONFIG_MFD_BD9571MWV=m
CONFIG_MFD_AXP20X=m
CONFIG_MFD_AXP20X_I2C=m
CONFIG_MFD_MADERA=y
CONFIG_MFD_MADERA_I2C=m
CONFIG_MFD_CS47L15=y
# CONFIG_MFD_CS47L35 is not set
CONFIG_MFD_CS47L85=y
# CONFIG_MFD_CS47L90 is not set
# CONFIG_MFD_CS47L92 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
CONFIG_MFD_DA9150=m
# CONFIG_MFD_ENE_KB3930 is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
CONFIG_MFD_GATEWORKS_GSC=m
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_I2C=m
CONFIG_MFD_MP2629=m
# CONFIG_MFD_MXS_LRADC is not set
# CONFIG_MFD_MX25_TSADC is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_MFD_HI6421_SPMI is not set
# CONFIG_MFD_HI655X_PMIC is not set
CONFIG_HTC_PASIC3=y
CONFIG_MFD_IQS62X=m
# CONFIG_MFD_KEMPLD is not set
CONFIG_MFD_88PM800=m
CONFIG_MFD_88PM805=m
CONFIG_MFD_MAX14577=m
CONFIG_MFD_MAX77650=m
CONFIG_MFD_MAX77686=m
CONFIG_MFD_MAX77693=m
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX8907 is not set
CONFIG_MFD_MT6360=m
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_NTXEC is not set
CONFIG_MFD_RETU=m
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_PM8XXX is not set
# CONFIG_MFD_SPMI_PMIC is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
CONFIG_MFD_RK808=m
CONFIG_MFD_RN5T618=m
CONFIG_MFD_SI476X_CORE=m
# CONFIG_MFD_SIMPLE_MFD_I2C is not set
# CONFIG_MFD_SL28CPLD is not set
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SUN6I_PRCM is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=m
CONFIG_MFD_TI_LMU=m
CONFIG_TPS6105X=m
CONFIG_TPS65010=m
CONFIG_TPS6507X=m
CONFIG_MFD_TPS65086=m
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
CONFIG_MFD_TPS65218=m
CONFIG_MFD_TPS65912=m
CONFIG_MFD_TPS65912_I2C=m
CONFIG_MFD_WL1273_CORE=m
# CONFIG_MFD_LM3533 is not set
CONFIG_MFD_TQMX86=m
CONFIG_MFD_ARIZONA=m
CONFIG_MFD_ARIZONA_I2C=m
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
# CONFIG_MFD_WM8997 is not set
CONFIG_MFD_WM8998=y
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_STW481X is not set
# CONFIG_MFD_STM32_LPTIMER is not set
# CONFIG_MFD_STM32_TIMERS is not set
# CONFIG_MFD_STMFX is not set
# CONFIG_MFD_WCD934X is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_KHADAS_MCU is not set
# CONFIG_MFD_ACER_A500_EC is not set
# CONFIG_MFD_QCOM_PM8008 is not set
# CONFIG_MFD_RSMU_I2C is not set
# end of Multifunction device drivers
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=m
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
CONFIG_REGULATOR_88PG86X=m
CONFIG_REGULATOR_88PM800=m
CONFIG_REGULATOR_ACT8945A=m
CONFIG_REGULATOR_AD5398=m
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_AXP20X=m
CONFIG_REGULATOR_BD9571MWV=m
# CONFIG_REGULATOR_DA9121 is not set
CONFIG_REGULATOR_DA9210=m
# CONFIG_REGULATOR_DA9211 is not set
CONFIG_REGULATOR_FAN53555=m
# CONFIG_REGULATOR_FAN53880 is not set
# CONFIG_REGULATOR_GPIO is not set
CONFIG_REGULATOR_ISL9305=m
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_LM363X=m
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_LP872X=m
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LTC3589 is not set
CONFIG_REGULATOR_LTC3676=m
# CONFIG_REGULATOR_MAX14577 is not set
CONFIG_REGULATOR_MAX1586=m
# CONFIG_REGULATOR_MAX77620 is not set
# CONFIG_REGULATOR_MAX77650 is not set
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=m
# CONFIG_REGULATOR_MAX8893 is not set
# CONFIG_REGULATOR_MAX8907 is not set
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_MAX8973=m
# CONFIG_REGULATOR_MAX20086 is not set
# CONFIG_REGULATOR_MAX77686 is not set
# CONFIG_REGULATOR_MAX77693 is not set
CONFIG_REGULATOR_MAX77802=m
CONFIG_REGULATOR_MAX77826=m
# CONFIG_REGULATOR_MC13783 is not set
# CONFIG_REGULATOR_MC13892 is not set
# CONFIG_REGULATOR_MCP16502 is not set
# CONFIG_REGULATOR_MP5416 is not set
CONFIG_REGULATOR_MP8859=m
CONFIG_REGULATOR_MP886X=m
CONFIG_REGULATOR_MPQ7920=m
# CONFIG_REGULATOR_MT6311 is not set
# CONFIG_REGULATOR_MT6315 is not set
# CONFIG_REGULATOR_MT6360 is not set
# CONFIG_REGULATOR_PBIAS is not set
CONFIG_REGULATOR_PCA9450=m
# CONFIG_REGULATOR_PF8X00 is not set
CONFIG_REGULATOR_PFUZE100=m
CONFIG_REGULATOR_PV88060=m
CONFIG_REGULATOR_PV88080=m
# CONFIG_REGULATOR_PV88090 is not set
# CONFIG_REGULATOR_PWM is not set
# CONFIG_REGULATOR_QCOM_RPMH is not set
CONFIG_REGULATOR_QCOM_SPMI=m
CONFIG_REGULATOR_QCOM_USB_VBUS=m
# CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY is not set
CONFIG_REGULATOR_RK808=m
CONFIG_REGULATOR_RN5T618=m
# CONFIG_REGULATOR_RT4801 is not set
# CONFIG_REGULATOR_RT5190A is not set
# CONFIG_REGULATOR_RT5759 is not set
# CONFIG_REGULATOR_RT6160 is not set
# CONFIG_REGULATOR_RT6245 is not set
# CONFIG_REGULATOR_RTQ2134 is not set
CONFIG_REGULATOR_RTMV20=m
# CONFIG_REGULATOR_RTQ6752 is not set
# CONFIG_REGULATOR_S2MPA01 is not set
# CONFIG_REGULATOR_S2MPS11 is not set
# CONFIG_REGULATOR_S5M8767 is not set
# CONFIG_REGULATOR_SC2731 is not set
CONFIG_REGULATOR_SLG51000=m
# CONFIG_REGULATOR_STM32_BOOSTER is not set
# CONFIG_REGULATOR_STM32_VREFBUF is not set
# CONFIG_REGULATOR_STM32_PWR is not set
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_STW481X_VMMC is not set
# CONFIG_REGULATOR_SY7636A is not set
# CONFIG_REGULATOR_SY8106A is not set
CONFIG_REGULATOR_SY8824X=m
CONFIG_REGULATOR_SY8827N=m
CONFIG_REGULATOR_TPS51632=m
# CONFIG_REGULATOR_TPS6105X is not set
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS6286X is not set
CONFIG_REGULATOR_TPS65023=m
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65086 is not set
CONFIG_REGULATOR_TPS65132=m
CONFIG_REGULATOR_TPS65218=m
CONFIG_REGULATOR_TPS65912=m
# CONFIG_REGULATOR_TPS68470 is not set
# CONFIG_REGULATOR_UNIPHIER is not set
CONFIG_REGULATOR_VCTRL=m
CONFIG_REGULATOR_QCOM_LABIBB=m
CONFIG_RC_CORE=y
# CONFIG_LIRC is not set
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
CONFIG_IR_IMON_DECODER=y
# CONFIG_IR_JVC_DECODER is not set
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_RCMM_DECODER=y
# CONFIG_IR_SANYO_DECODER is not set
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_XMP_DECODER=m
# CONFIG_RC_DEVICES is not set
CONFIG_CEC_CORE=m
#
# CEC support
#
# CONFIG_MEDIA_CEC_RC is not set
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=m
# CONFIG_CEC_MESON_AO is not set
# CONFIG_CEC_MESON_G12A_AO is not set
# CONFIG_CEC_GPIO is not set
# CONFIG_CEC_SAMSUNG_S5P is not set
# CONFIG_CEC_STI is not set
# CONFIG_CEC_STM32 is not set
# CONFIG_CEC_TEGRA is not set
# end of CEC support
CONFIG_MEDIA_SUPPORT=m
# CONFIG_MEDIA_SUPPORT_FILTER is not set
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
#
# Media core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_DVB_CORE=m
# end of Media core support
#
# Digital TV options
#
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
CONFIG_DVB_ULE_DEBUG=y
# end of Digital TV options
#
# Media drivers
#
#
# Media drivers
#
CONFIG_MEDIA_PLATFORM_DRIVERS=y
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_SDR_PLATFORM_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
#
# Allegro DVT media platform drivers
#
#
# Amlogic media platform drivers
#
#
# Amphion drivers
#
#
# Aspeed media platform drivers
#
#
# Atmel media platform drivers
#
#
# Cadence media platform drivers
#
#
# Chips&Media media platform drivers
#
#
# Intel media platform drivers
#
#
# Marvell media platform drivers
#
#
# Mediatek media platform drivers
#
#
# NVidia media platform drivers
#
#
# NXP media platform drivers
#
#
# Qualcomm media platform drivers
#
#
# Renesas media platform drivers
#
#
# Rockchip media platform drivers
#
#
# Samsung media platform drivers
#
#
# STMicroelectronics media platform drivers
#
#
# Sunxi media platform drivers
#
#
# Texas Instruments drivers
#
#
# VIA media platform drivers
#
#
# Xilinx media platform drivers
#
CONFIG_DVB_TEST_DRIVERS=y
CONFIG_DVB_VIDTV=m
# end of Media drivers
#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MT2060=m
# CONFIG_MEDIA_TUNER_MT2063 is not set
CONFIG_MEDIA_TUNER_MT20XX=m
# CONFIG_MEDIA_TUNER_MT2131 is not set
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MXL301RF=m
# CONFIG_MEDIA_TUNER_MXL5005S is not set
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
# CONFIG_MEDIA_TUNER_QM1D1C0042 is not set
# CONFIG_MEDIA_TUNER_QT1010 is not set
# CONFIG_MEDIA_TUNER_R820T is not set
CONFIG_MEDIA_TUNER_SI2157=m
# CONFIG_MEDIA_TUNER_SIMPLE is not set
# CONFIG_MEDIA_TUNER_TDA18212 is not set
CONFIG_MEDIA_TUNER_TDA18218=m
# CONFIG_MEDIA_TUNER_TDA18250 is not set
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_XC5000=m
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_M88DS3103 is not set
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_STB0899=m
# CONFIG_DVB_STB6100 is not set
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
# CONFIG_DVB_STV6111 is not set
#
# Multistandard (cable + terrestrial) frontends
#
# CONFIG_DVB_DRXK is not set
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_TDA18271C2DD=m
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24116 is not set
# CONFIG_DVB_CX24117 is not set
# CONFIG_DVB_CX24120 is not set
# CONFIG_DVB_CX24123 is not set
CONFIG_DVB_DS3000=m
# CONFIG_DVB_MB86A16 is not set
# CONFIG_DVB_MT312 is not set
CONFIG_DVB_S5H1420=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STV0299=m
# CONFIG_DVB_STV0900 is not set
CONFIG_DVB_STV6110=m
# CONFIG_DVB_TDA10071 is not set
# CONFIG_DVB_TDA10086 is not set
# CONFIG_DVB_TDA8083 is not set
CONFIG_DVB_TDA8261=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_TUNER_CX24113=m
# CONFIG_DVB_TUNER_ITD1000 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_ZL10036 is not set
CONFIG_DVB_ZL10039=m
#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_AF9013 is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_DIB3000MB=m
# CONFIG_DVB_DIB3000MC is not set
CONFIG_DVB_DIB7000M=m
# CONFIG_DVB_DIB7000P is not set
CONFIG_DVB_DIB9000=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_EC100=m
# CONFIG_DVB_L64781 is not set
CONFIG_DVB_MT352=m
# CONFIG_DVB_NXT6000 is not set
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_S5H1432=m
# CONFIG_DVB_SI2168 is not set
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_STV0367 is not set
CONFIG_DVB_TDA10048=m
CONFIG_DVB_TDA1004X=m
# CONFIG_DVB_ZD1301_DEMOD is not set
CONFIG_DVB_ZL10353=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_STV0297=m
CONFIG_DVB_TDA10021=m
# CONFIG_DVB_TDA10023 is not set
CONFIG_DVB_VES1820=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LG2160=m
# CONFIG_DVB_LGDT3305 is not set
CONFIG_DVB_LGDT3306A=m
# CONFIG_DVB_LGDT330X is not set
CONFIG_DVB_MXL692=m
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_S5H1409=m
# CONFIG_DVB_S5H1411 is not set
#
# ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_DIB8000 is not set
CONFIG_DVB_MB86A20S=m
CONFIG_DVB_S921=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_MN88443X=m
CONFIG_DVB_TC90522=m
#
# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_A8293=m
# CONFIG_DVB_AF9033 is not set
# CONFIG_DVB_ASCOT2E is not set
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_HELENE=m
# CONFIG_DVB_HORUS3A is not set
CONFIG_DVB_ISL6405=m
# CONFIG_DVB_ISL6421 is not set
CONFIG_DVB_ISL6423=m
CONFIG_DVB_IX2505V=m
# CONFIG_DVB_LGS8GL5 is not set
CONFIG_DVB_LGS8GXX=m
# CONFIG_DVB_LNBH25 is not set
CONFIG_DVB_LNBH29=m
# CONFIG_DVB_LNBP21 is not set
CONFIG_DVB_LNBP22=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_DRX39XYJ=m
#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
CONFIG_DVB_SP2=m
# end of Customise DVB Frontends
#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=m
# end of Media ancillary drivers
#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
# CONFIG_IMX_IPUV3_CORE is not set
# CONFIG_DRM is not set
#
# ARM devices
#
# end of ARM devices
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_BACKLIGHT=m
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CLPS711X is not set
# CONFIG_FB_IMX is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_CONTROL is not set
# CONFIG_FB_GBE is not set
# CONFIG_FB_PVR2 is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_ATMEL is not set
# CONFIG_FB_WM8505 is not set
# CONFIG_FB_PXA168 is not set
# CONFIG_FB_W100 is not set
# CONFIG_FB_SH_MOBILE_LCDC is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_S3C is not set
CONFIG_FB_SM501=y
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_DA8XX is not set
CONFIG_FB_VIRTUAL=m
CONFIG_FB_METRONOME=m
# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_SIMPLE=y
CONFIG_FB_SSD1307=m
# CONFIG_FB_OMAP2 is not set
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=m
# CONFIG_BACKLIGHT_OMAP1 is not set
CONFIG_BACKLIGHT_PWM=y
# CONFIG_BACKLIGHT_QCOM_WLED is not set
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
CONFIG_BACKLIGHT_LM3630A=m
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=m
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=m
CONFIG_BACKLIGHT_BD6107=m
# CONFIG_BACKLIGHT_ARCXCNN is not set
# CONFIG_BACKLIGHT_LED is not set
# end of Backlight & LCD device support
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# end of Console display driver support
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
# CONFIG_LOGO_LINUX_CLUT224 is not set
# end of Graphics support
CONFIG_SOUND=m
# CONFIG_SND is not set
#
# HID support
#
CONFIG_HID=m
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=m
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
# CONFIG_HID_CHERRY is not set
CONFIG_HID_COUGAR=m
# CONFIG_HID_MACALLY is not set
CONFIG_HID_CMEDIA=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GEMBIRD=m
# CONFIG_HID_GFRM is not set
CONFIG_HID_GLORIOUS=m
CONFIG_HID_VIVALDI_COMMON=m
CONFIG_HID_VIVALDI=m
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=m
# CONFIG_HID_WALTOP is not set
CONFIG_HID_VIEWSONIC=m
# CONFIG_HID_XIAOMI is not set
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
# CONFIG_HID_ITE is not set
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MALTRON=m
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=m
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NINTENDO is not set
# CONFIG_HID_NTI is not set
CONFIG_HID_ORTEK=m
# CONFIG_HID_PANTHERLORD is not set
CONFIG_HID_PETALYNX=m
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_PLANTRONICS=m
# CONFIG_HID_RAZER is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SEMITEK is not set
CONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
# CONFIG_HID_THINGM is not set
CONFIG_HID_UDRAW_PS3=m
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_XINMO=m
# CONFIG_HID_ZEROPLUS is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
# CONFIG_HID_SENSOR_CUSTOM_SENSOR is not set
CONFIG_HID_ALPS=m
# end of Special HID drivers
#
# I2C HID support
#
# CONFIG_I2C_HID_OF is not set
# CONFIG_I2C_HID_OF_ELAN is not set
# CONFIG_I2C_HID_OF_GOODIX is not set
# end of I2C HID support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_SCSI_UFSHCD is not set
CONFIG_MEMSTICK=m
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
CONFIG_MS_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
CONFIG_LEDS_CLASS_FLASH=m
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_ARIEL is not set
# CONFIG_LEDS_AW2013 is not set
CONFIG_LEDS_BCM6328=m
CONFIG_LEDS_BCM6358=m
# CONFIG_LEDS_LM3530 is not set
CONFIG_LEDS_LM3532=m
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_LM3692X=m
# CONFIG_LEDS_S3C24XX is not set
# CONFIG_LEDS_COBALT_QUBE is not set
CONFIG_LEDS_PCA9532=m
# CONFIG_LEDS_PCA9532_GPIO is not set
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP3952=m
CONFIG_LEDS_LP50XX=m
# CONFIG_LEDS_LP55XX_COMMON is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
CONFIG_LEDS_PCA963X=m
CONFIG_LEDS_PWM=m
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_NS2=m
CONFIG_LEDS_NETXBIG=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_MAX77650 is not set
CONFIG_LEDS_LM355x=m
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_IS31FL319X is not set
CONFIG_LEDS_IS31FL32XX=m
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
# CONFIG_LEDS_MLXREG is not set
CONFIG_LEDS_USER=m
CONFIG_LEDS_TI_LMU_COMMON=m
CONFIG_LEDS_LM3697=m
CONFIG_LEDS_LM36274=m
# CONFIG_LEDS_TPS6105X is not set
# CONFIG_LEDS_IP30 is not set
# CONFIG_LEDS_BCM63138 is not set
# CONFIG_LEDS_LGM is not set
#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AAT1290=m
# CONFIG_LEDS_AS3645A is not set
# CONFIG_LEDS_KTD2692 is not set
# CONFIG_LEDS_LM3601X is not set
CONFIG_LEDS_MAX77693=m
# CONFIG_LEDS_MT6360 is not set
# CONFIG_LEDS_RT4505 is not set
# CONFIG_LEDS_RT8515 is not set
CONFIG_LEDS_SGM3140=m
#
# RGB LED drivers
#
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
CONFIG_DMABUF_SELFTESTS=y
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set
# end of DMABUF options
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_VFIO=y
CONFIG_VFIO_NOIOMMU=y
# CONFIG_VFIO_PLATFORM is not set
CONFIG_VFIO_MDEV=y
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_INPUT=m
# CONFIG_VIRTIO_MMIO is not set
# CONFIG_VHOST_MENU is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
CONFIG_GREYBUS=y
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_BOND=y
CONFIG_COMEDI_TEST=m
# CONFIG_COMEDI_PARPORT is not set
# CONFIG_COMEDI_SSV_DNP is not set
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=y
CONFIG_COMEDI_PCL724=m
# CONFIG_COMEDI_PCL726 is not set
CONFIG_COMEDI_PCL730=m
# CONFIG_COMEDI_PCL812 is not set
CONFIG_COMEDI_PCL816=m
# CONFIG_COMEDI_PCL818 is not set
CONFIG_COMEDI_PCM3724=y
CONFIG_COMEDI_AMPLC_DIO200_ISA=y
CONFIG_COMEDI_AMPLC_PC236_ISA=m
CONFIG_COMEDI_AMPLC_PC263_ISA=y
CONFIG_COMEDI_RTI800=m
# CONFIG_COMEDI_RTI802 is not set
CONFIG_COMEDI_DAC02=y
# CONFIG_COMEDI_DAS16M1 is not set
# CONFIG_COMEDI_DAS08_ISA is not set
# CONFIG_COMEDI_DAS16 is not set
# CONFIG_COMEDI_DAS800 is not set
CONFIG_COMEDI_DAS1800=y
# CONFIG_COMEDI_DAS6402 is not set
CONFIG_COMEDI_DT2801=m
CONFIG_COMEDI_DT2811=m
CONFIG_COMEDI_DT2814=y
# CONFIG_COMEDI_DT2815 is not set
# CONFIG_COMEDI_DT2817 is not set
# CONFIG_COMEDI_DT282X is not set
# CONFIG_COMEDI_DMM32AT is not set
# CONFIG_COMEDI_FL512 is not set
CONFIG_COMEDI_AIO_AIO12_8=y
CONFIG_COMEDI_AIO_IIRO_16=y
CONFIG_COMEDI_II_PCI20KC=m
CONFIG_COMEDI_C6XDIGIO=y
CONFIG_COMEDI_MPC624=y
CONFIG_COMEDI_ADQ12B=m
# CONFIG_COMEDI_NI_AT_A2150 is not set
CONFIG_COMEDI_NI_AT_AO=y
# CONFIG_COMEDI_NI_ATMIO is not set
# CONFIG_COMEDI_NI_ATMIO16D is not set
CONFIG_COMEDI_NI_LABPC_ISA=y
# CONFIG_COMEDI_PCMAD is not set
CONFIG_COMEDI_PCMDA12=y
# CONFIG_COMEDI_PCMMIO is not set
CONFIG_COMEDI_PCMUIO=m
CONFIG_COMEDI_MULTIQ3=m
CONFIG_COMEDI_S526=m
CONFIG_COMEDI_PCMCIA_DRIVERS=m
CONFIG_COMEDI_CB_DAS16_CS=m
CONFIG_COMEDI_DAS08_CS=m
# CONFIG_COMEDI_NI_DAQ_700_CS is not set
CONFIG_COMEDI_NI_DAQ_DIO24_CS=m
CONFIG_COMEDI_NI_LABPC_CS=m
CONFIG_COMEDI_NI_MIO_CS=m
CONFIG_COMEDI_QUATECH_DAQP_CS=m
CONFIG_COMEDI_8254=y
CONFIG_COMEDI_8255=y
CONFIG_COMEDI_8255_SA=y
CONFIG_COMEDI_KCOMEDILIB=y
CONFIG_COMEDI_AMPLC_DIO200=y
CONFIG_COMEDI_AMPLC_PC236=m
CONFIG_COMEDI_DAS08=m
CONFIG_COMEDI_NI_LABPC=y
CONFIG_COMEDI_NI_TIO=m
CONFIG_COMEDI_NI_ROUTING=m
# CONFIG_COMEDI_TESTS is not set
CONFIG_STAGING=y
CONFIG_STAGING_MEDIA=y
# CONFIG_VIDEO_SUNXI is not set
# CONFIG_STAGING_BOARD is not set
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
CONFIG_GREYBUS_BOOTROM=m
# CONFIG_GREYBUS_HID is not set
CONFIG_GREYBUS_LIGHT=m
CONFIG_GREYBUS_LOG=y
CONFIG_GREYBUS_LOOPBACK=m
CONFIG_GREYBUS_RAW=y
# CONFIG_GREYBUS_VIBRATOR is not set
CONFIG_GREYBUS_BRIDGED_PHY=m
# CONFIG_GREYBUS_GPIO is not set
# CONFIG_GREYBUS_I2C is not set
CONFIG_GREYBUS_PWM=m
CONFIG_GREYBUS_UART=m
# CONFIG_GREYBUS_ARCHE is not set
CONFIG_BCM_VIDEOCORE=y
# CONFIG_BCM2835_VCHIQ is not set
CONFIG_XIL_AXIS_FIFO=m
# CONFIG_FIELDBUS_DEV is not set
# CONFIG_GOLDFISH is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_OLPC_XO175 is not set
CONFIG_SURFACE_PLATFORMS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Clock driver for ARM Reference designs
#
# CONFIG_CLK_ICST is not set
# CONFIG_CLK_SP810 is not set
# end of Clock driver for ARM Reference designs
# CONFIG_CLK_HSDK is not set
# CONFIG_COMMON_CLK_APPLE_NCO is not set
CONFIG_COMMON_CLK_MAX77686=m
CONFIG_COMMON_CLK_MAX9485=m
# CONFIG_COMMON_CLK_RK808 is not set
# CONFIG_COMMON_CLK_SCMI is not set
# CONFIG_COMMON_CLK_SCPI is not set
CONFIG_COMMON_CLK_SI5341=m
CONFIG_COMMON_CLK_SI5351=m
# CONFIG_COMMON_CLK_SI514 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_BM1880 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_TPS68470 is not set
CONFIG_COMMON_CLK_CDCE925=m
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_EN7523 is not set
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
# CONFIG_COMMON_CLK_FSL_SAI is not set
# CONFIG_COMMON_CLK_GEMINI is not set
# CONFIG_COMMON_CLK_LAN966X is not set
# CONFIG_COMMON_CLK_ASPEED is not set
# CONFIG_COMMON_CLK_S2MPS11 is not set
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
# CONFIG_CLK_QORIQ is not set
# CONFIG_CLK_LS1028A_PLLDIG is not set
# CONFIG_COMMON_CLK_XGENE is not set
CONFIG_COMMON_CLK_PWM=m
# CONFIG_COMMON_CLK_OXNAS is not set
# CONFIG_COMMON_CLK_RS9_PCIE is not set
# CONFIG_COMMON_CLK_VC5 is not set
# CONFIG_COMMON_CLK_MMP2_AUDIO is not set
CONFIG_COMMON_CLK_FIXED_MMIO=y
# CONFIG_CLK_ACTIONS is not set
# CONFIG_CLK_BAIKAL_T1 is not set
# CONFIG_CLK_BCM2711_DVP is not set
# CONFIG_CLK_BCM2835 is not set
# CONFIG_CLK_BCM_63XX is not set
# CONFIG_CLK_BCM_63XX_GATE is not set
# CONFIG_CLK_BCM_KONA is not set
# CONFIG_CLK_BCM_CYGNUS is not set
# CONFIG_CLK_BCM_HR2 is not set
# CONFIG_CLK_BCM_NSP is not set
# CONFIG_CLK_BCM_NS2 is not set
# CONFIG_CLK_BCM_SR is not set
# CONFIG_CLK_RASPBERRYPI is not set
# CONFIG_COMMON_CLK_HI3516CV300 is not set
# CONFIG_COMMON_CLK_HI3519 is not set
# CONFIG_COMMON_CLK_HI3559A is not set
# CONFIG_COMMON_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_HI3670 is not set
# CONFIG_COMMON_CLK_HI3798CV200 is not set
# CONFIG_COMMON_CLK_HI6220 is not set
# CONFIG_RESET_HISI is not set
# CONFIG_COMMON_CLK_BOSTON is not set
# CONFIG_MXC_CLK is not set
# CONFIG_CLK_IMX8MM is not set
# CONFIG_CLK_IMX8MN is not set
# CONFIG_CLK_IMX8MP is not set
# CONFIG_CLK_IMX8MQ is not set
# CONFIG_CLK_IMX8ULP is not set
# CONFIG_CLK_IMX93 is not set
#
# Ingenic SoCs drivers
#
# CONFIG_INGENIC_CGU_JZ4740 is not set
# CONFIG_INGENIC_CGU_JZ4725B is not set
# CONFIG_INGENIC_CGU_JZ4760 is not set
# CONFIG_INGENIC_CGU_JZ4770 is not set
# CONFIG_INGENIC_CGU_JZ4780 is not set
# CONFIG_INGENIC_CGU_X1000 is not set
# CONFIG_INGENIC_CGU_X1830 is not set
# CONFIG_INGENIC_TCU_CLK is not set
# end of Ingenic SoCs drivers
# CONFIG_COMMON_CLK_KEYSTONE is not set
# CONFIG_TI_SYSCON_CLK is not set
#
# Clock driver for MediaTek SoC
#
# CONFIG_COMMON_CLK_MT2701 is not set
# CONFIG_COMMON_CLK_MT2712 is not set
# CONFIG_COMMON_CLK_MT6765 is not set
# CONFIG_COMMON_CLK_MT6779 is not set
# CONFIG_COMMON_CLK_MT6797 is not set
# CONFIG_COMMON_CLK_MT7622 is not set
# CONFIG_COMMON_CLK_MT7629 is not set
# CONFIG_COMMON_CLK_MT7986 is not set
# CONFIG_COMMON_CLK_MT8135 is not set
# CONFIG_COMMON_CLK_MT8167 is not set
# CONFIG_COMMON_CLK_MT8173 is not set
# CONFIG_COMMON_CLK_MT8183 is not set
# CONFIG_COMMON_CLK_MT8186 is not set
# CONFIG_COMMON_CLK_MT8192 is not set
# CONFIG_COMMON_CLK_MT8195 is not set
# CONFIG_COMMON_CLK_MT8516 is not set
# end of Clock driver for MediaTek SoC
#
# Clock support for Amlogic platforms
#
# end of Clock support for Amlogic platforms
# CONFIG_MSTAR_MSC313_MPLL is not set
# CONFIG_MCHP_CLK_MPFS is not set
# CONFIG_COMMON_CLK_PISTACHIO is not set
# CONFIG_COMMON_CLK_QCOM is not set
# CONFIG_CLK_MT7621 is not set
# CONFIG_CLK_RENESAS is not set
# CONFIG_COMMON_CLK_SAMSUNG is not set
# CONFIG_S3C2410_COMMON_CLK is not set
# CONFIG_S3C2412_COMMON_CLK is not set
# CONFIG_S3C2443_COMMON_CLK is not set
# CONFIG_CLK_SIFIVE is not set
# CONFIG_CLK_INTEL_SOCFPGA is not set
# CONFIG_SPRD_COMMON_CLK is not set
# CONFIG_CLK_STARFIVE_JH7100 is not set
CONFIG_CLK_SUNXI=y
CONFIG_CLK_SUNXI_CLOCKS=y
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
CONFIG_CLK_SUNXI_PRCM_SUN9I=y
# CONFIG_SUNXI_CCU is not set
# CONFIG_COMMON_CLK_TI_ADPLL is not set
# CONFIG_CLK_UNIPHIER is not set
# CONFIG_COMMON_CLK_VISCONTI is not set
# CONFIG_CLK_LGM_CGU is not set
CONFIG_XILINX_VCU=m
# CONFIG_COMMON_CLK_ZYNQMP is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
# CONFIG_BCM2835_TIMER is not set
# CONFIG_BCM_KONA_TIMER is not set
# CONFIG_DAVINCI_TIMER is not set
# CONFIG_DIGICOLOR_TIMER is not set
# CONFIG_OMAP_DM_TIMER is not set
# CONFIG_DW_APB_TIMER is not set
# CONFIG_FTTMR010_TIMER is not set
# CONFIG_IXP4XX_TIMER is not set
# CONFIG_MESON6_TIMER is not set
# CONFIG_OWL_TIMER is not set
# CONFIG_RDA_TIMER is not set
# CONFIG_SUN4I_TIMER is not set
# CONFIG_SUN5I_HSTIMER is not set
# CONFIG_TEGRA_TIMER is not set
# CONFIG_TEGRA186_TIMER is not set
# CONFIG_VT8500_TIMER is not set
# CONFIG_NPCM7XX_TIMER is not set
# CONFIG_CADENCE_TTC_TIMER is not set
# CONFIG_ASM9260_TIMER is not set
# CONFIG_CLKSRC_DBX500_PRCMU is not set
# CONFIG_CLPS711X_TIMER is not set
# CONFIG_MXS_TIMER is not set
# CONFIG_NSPIRE_TIMER is not set
# CONFIG_INTEGRATOR_AP_TIMER is not set
# CONFIG_CLKSRC_PISTACHIO is not set
# CONFIG_CLKSRC_TI_32K is not set
# CONFIG_CLKSRC_STM32_LP is not set
# CONFIG_CLKSRC_MPS2 is not set
CONFIG_ARC_TIMERS=y
CONFIG_ARC_TIMERS_64BIT=y
# CONFIG_ARM_TIMER_SP804 is not set
# CONFIG_ARMV7M_SYSTICK is not set
# CONFIG_ATMEL_PIT is not set
# CONFIG_ATMEL_ST is not set
# CONFIG_CLKSRC_SAMSUNG_PWM is not set
# CONFIG_FSL_FTM_TIMER is not set
# CONFIG_OXNAS_RPS_TIMER is not set
# CONFIG_MTK_TIMER is not set
# CONFIG_CLKSRC_JCORE_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_RENESAS_OSTM is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_CLKSRC_VERSATILE is not set
# CONFIG_CLKSRC_PXA is not set
# CONFIG_TIMER_IMX_SYS_CTR is not set
# CONFIG_CLKSRC_ST_LPC is not set
# CONFIG_GXP_TIMER is not set
# CONFIG_MSC313E_TIMER is not set
# CONFIG_INGENIC_TIMER is not set
# CONFIG_INGENIC_SYSOST is not set
# CONFIG_INGENIC_OST is not set
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# end of Generic IOMMU Pagetable Support
CONFIG_IOMMU_DEBUGFS=y
CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_OF_IOMMU=y
# CONFIG_OMAP_IOMMU is not set
# CONFIG_ROCKCHIP_IOMMU is not set
# CONFIG_SUN50I_IOMMU is not set
# CONFIG_IPMMU_VMSA is not set
# CONFIG_APPLE_DART is not set
# CONFIG_ARM_SMMU is not set
# CONFIG_S390_CCW_IOMMU is not set
# CONFIG_S390_AP_IOMMU is not set
# CONFIG_MTK_IOMMU is not set
# CONFIG_QCOM_IOMMU is not set
# CONFIG_SPRD_IOMMU is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=m
# CONFIG_RPMSG_CTRL is not set
CONFIG_RPMSG_NS=m
CONFIG_RPMSG_VIRTIO=m
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
#
# SOC (System On Chip) specific Drivers
#
# CONFIG_OWL_PM_DOMAINS is not set
#
# Amlogic SoC drivers
#
# CONFIG_MESON_CANVAS is not set
# CONFIG_MESON_CLK_MEASURE is not set
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_GX_PM_DOMAINS is not set
# CONFIG_MESON_EE_PM_DOMAINS is not set
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers
#
# Apple SoC drivers
#
# CONFIG_APPLE_PMGR_PWRSTATE is not set
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers
#
# ASPEED SoC drivers
#
# CONFIG_ASPEED_LPC_CTRL is not set
# CONFIG_ASPEED_LPC_SNOOP is not set
# CONFIG_ASPEED_UART_ROUTING is not set
# CONFIG_ASPEED_P2A_CTRL is not set
# CONFIG_ASPEED_SOCINFO is not set
# end of ASPEED SoC drivers
# CONFIG_AT91_SOC_ID is not set
# CONFIG_AT91_SOC_SFR is not set
#
# Broadcom SoC drivers
#
# CONFIG_BCM2835_POWER is not set
# CONFIG_SOC_BCM63XX is not set
# CONFIG_SOC_BRCMSTB is not set
# CONFIG_BCM_PMB is not set
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
CONFIG_DPAA2_CONSOLE=y
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# CONFIG_IMX_GPCV2_PM_DOMAINS is not set
# CONFIG_SOC_IMX8M is not set
# end of i.MX SoC drivers
#
# IXP4xx SoC drivers
#
# CONFIG_IXP4XX_QMGR is not set
# CONFIG_IXP4XX_NPE is not set
# end of IXP4xx SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers
#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
# CONFIG_MTK_DEVAPC is not set
# CONFIG_MTK_INFRACFG is not set
# CONFIG_MTK_PMIC_WRAP is not set
# CONFIG_MTK_SCPSYS is not set
# CONFIG_MTK_SCPSYS_PM_DOMAINS is not set
# CONFIG_MTK_MMSYS is not set
# end of MediaTek SoC drivers
#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_COMMAND_DB is not set
# CONFIG_QCOM_GENI_SE is not set
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_RPMH is not set
# CONFIG_QCOM_SMD_RPM is not set
# CONFIG_QCOM_SPM is not set
# CONFIG_QCOM_WCNSS_CTRL is not set
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers
# CONFIG_SOC_RENESAS is not set
# CONFIG_ROCKCHIP_GRF is not set
# CONFIG_ROCKCHIP_IODOMAIN is not set
# CONFIG_ROCKCHIP_PM_DOMAINS is not set
# CONFIG_SOC_SAMSUNG is not set
# CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not set
CONFIG_SOC_TI=y
# CONFIG_UX500_SOC_ID is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
CONFIG_DEVFREQ_GOV_POWERSAVE=y
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
CONFIG_DEVFREQ_GOV_PASSIVE=m
#
# DEVFREQ Drivers
#
# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set
# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
# CONFIG_ARM_TEGRA_DEVFREQ is not set
# CONFIG_ARM_MEDIATEK_CCI_DEVFREQ is not set
# CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set
CONFIG_PM_DEVFREQ_EVENT=y
# CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP is not set
# CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU is not set
# CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI is not set
CONFIG_EXTCON=m
#
# Extcon Device Drivers
#
# CONFIG_EXTCON_FSA9480 is not set
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_MAX14577=m
CONFIG_EXTCON_MAX3355=m
CONFIG_EXTCON_MAX77693=m
CONFIG_EXTCON_PTN5150=m
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
CONFIG_EXTCON_RT8973A=m
CONFIG_EXTCON_SM5502=m
CONFIG_EXTCON_USB_GPIO=m
# CONFIG_EXTCON_USBC_TUSB320 is not set
CONFIG_MEMORY=y
CONFIG_DDR=y
# CONFIG_ATMEL_SDRAMC is not set
# CONFIG_ATMEL_EBI is not set
# CONFIG_BRCMSTB_DPFE is not set
# CONFIG_BT1_L2_CTL is not set
# CONFIG_TI_AEMIF is not set
# CONFIG_TI_EMIF is not set
# CONFIG_OMAP_GPMC is not set
# CONFIG_MVEBU_DEVBUS is not set
# CONFIG_FSL_CORENET_CF is not set
# CONFIG_FSL_IFC is not set
# CONFIG_JZ4780_NEMC is not set
# CONFIG_MTK_SMI is not set
# CONFIG_DA8XX_DDRCTL is not set
# CONFIG_RENESAS_RPCIF is not set
# CONFIG_STM32_FMC2_EBI is not set
# CONFIG_SAMSUNG_MC is not set
CONFIG_TEGRA_MC=y
CONFIG_TEGRA20_EMC=y
CONFIG_TEGRA30_EMC=y
CONFIG_TEGRA124_EMC=y
# CONFIG_TEGRA210_EMC is not set
# CONFIG_IIO is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_ATMEL is not set
CONFIG_PWM_ATMEL_HLCDC_PWM=m
# CONFIG_PWM_ATMEL_TCB is not set
# CONFIG_PWM_BCM_IPROC is not set
# CONFIG_PWM_BCM_KONA is not set
# CONFIG_PWM_BCM2835 is not set
# CONFIG_PWM_BERLIN is not set
# CONFIG_PWM_BRCMSTB is not set
# CONFIG_PWM_CLK is not set
# CONFIG_PWM_CLPS711X is not set
# CONFIG_PWM_EP93XX is not set
CONFIG_PWM_FSL_FTM=m
# CONFIG_PWM_HIBVT is not set
# CONFIG_PWM_IMG is not set
# CONFIG_PWM_IMX1 is not set
# CONFIG_PWM_IMX27 is not set
# CONFIG_PWM_IMX_TPM is not set
# CONFIG_PWM_INTEL_LGM is not set
# CONFIG_PWM_IQS620A is not set
# CONFIG_PWM_JZ4740 is not set
# CONFIG_PWM_KEEMBAY is not set
# CONFIG_PWM_LP3943 is not set
# CONFIG_PWM_LPC18XX_SCT is not set
# CONFIG_PWM_LPC32XX is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_MESON is not set
# CONFIG_PWM_MTK_DISP is not set
# CONFIG_PWM_MEDIATEK is not set
# CONFIG_PWM_MXS is not set
# CONFIG_PWM_OMAP_DMTIMER is not set
CONFIG_PWM_PCA9685=m
# CONFIG_PWM_PXA is not set
# CONFIG_PWM_RASPBERRYPI_POE is not set
# CONFIG_PWM_RCAR is not set
# CONFIG_PWM_RENESAS_TPU is not set
# CONFIG_PWM_ROCKCHIP is not set
# CONFIG_PWM_SAMSUNG is not set
# CONFIG_PWM_SIFIVE is not set
# CONFIG_PWM_SL28CPLD is not set
# CONFIG_PWM_SPEAR is not set
# CONFIG_PWM_SPRD is not set
# CONFIG_PWM_STI is not set
# CONFIG_PWM_STM32 is not set
# CONFIG_PWM_STM32_LP is not set
# CONFIG_PWM_SUN4I is not set
# CONFIG_PWM_SUNPLUS is not set
# CONFIG_PWM_TEGRA is not set
# CONFIG_PWM_TIECAP is not set
# CONFIG_PWM_TIEHRPWM is not set
# CONFIG_PWM_VISCONTI is not set
# CONFIG_PWM_VT8500 is not set
# CONFIG_PWM_XILINX is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
CONFIG_MADERA_IRQ=y
# CONFIG_JCORE_AIC is not set
# CONFIG_RENESAS_INTC_IRQPIN is not set
# CONFIG_RENESAS_IRQC is not set
# CONFIG_RENESAS_RZA1_IRQC is not set
# CONFIG_RENESAS_RZG2L_IRQC is not set
# CONFIG_SL28CPLD_INTC is not set
# CONFIG_TS4800_IRQ is not set
# CONFIG_XILINX_INTC is not set
# CONFIG_INGENIC_TCU_IRQ is not set
# CONFIG_IRQ_UNIPHIER_AIDET is not set
# CONFIG_MESON_IRQ_GPIO is not set
# CONFIG_IMX_IRQSTEER is not set
# CONFIG_IMX_INTMUX is not set
# CONFIG_EXYNOS_IRQ_COMBINER is not set
# CONFIG_MST_IRQ is not set
# CONFIG_MCHP_EIC is not set
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_A10SR is not set
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_AXS10X is not set
# CONFIG_RESET_BCM6345 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_BRCMSTB is not set
# CONFIG_RESET_BRCMSTB_RESCAL is not set
# CONFIG_RESET_HSDK is not set
# CONFIG_RESET_IMX7 is not set
# CONFIG_RESET_INTEL_GW is not set
# CONFIG_RESET_K210 is not set
# CONFIG_RESET_LANTIQ is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MCHP_SPARX5 is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_MESON_AUDIO_ARB is not set
# CONFIG_RESET_NPCM is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_QCOM_PDC is not set
# CONFIG_RESET_RASPBERRYPI is not set
# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
# CONFIG_RESET_SCMI is not set
CONFIG_RESET_SIMPLE=y
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STARFIVE_JH7100 is not set
# CONFIG_RESET_SUNPLUS is not set
# CONFIG_RESET_SUNXI is not set
# CONFIG_RESET_TI_SCI is not set
# CONFIG_RESET_TI_SYSCON is not set
# CONFIG_RESET_TI_TPS380X is not set
# CONFIG_RESET_TN48M_CPLD is not set
# CONFIG_RESET_UNIPHIER is not set
# CONFIG_RESET_UNIPHIER_GLUE is not set
# CONFIG_RESET_ZYNQ is not set
# CONFIG_COMMON_RESET_HI3660 is not set
# CONFIG_COMMON_RESET_HI6220 is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
# CONFIG_PHY_LPC18XX_USB_OTG is not set
# CONFIG_PHY_PISTACHIO_USB is not set
# CONFIG_PHY_XGENE is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set
# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
# CONFIG_PHY_SUN50I_USB3 is not set
# CONFIG_PHY_MESON8_HDMI_TX is not set
# CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG is not set
# CONFIG_PHY_MESON_G12A_USB2 is not set
# CONFIG_PHY_MESON_G12A_USB3_PCIE is not set
# CONFIG_PHY_MESON_AXG_PCIE is not set
# CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG is not set
# CONFIG_PHY_MESON_AXG_MIPI_DPHY is not set
#
# PHY drivers for Broadcom platforms
#
# CONFIG_PHY_BCM63XX_USBH is not set
# CONFIG_PHY_CYGNUS_PCIE is not set
# CONFIG_PHY_BCM_SR_USB is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_BCM_NS_USB2 is not set
# CONFIG_PHY_NS2_USB_DRD is not set
# CONFIG_PHY_BRCM_SATA is not set
# CONFIG_PHY_BRCM_USB is not set
# CONFIG_PHY_BCM_SR_PCIE is not set
# end of PHY drivers for Broadcom platforms
CONFIG_PHY_CADENCE_TORRENT=y
CONFIG_PHY_CADENCE_DPHY=m
# CONFIG_PHY_CADENCE_DPHY_RX is not set
CONFIG_PHY_CADENCE_SIERRA=y
CONFIG_PHY_CADENCE_SALVO=m
CONFIG_PHY_FSL_IMX8MQ_USB=m
# CONFIG_PHY_MIXEL_LVDS_PHY is not set
CONFIG_PHY_MIXEL_MIPI_DPHY=m
# CONFIG_PHY_FSL_IMX8M_PCIE is not set
# CONFIG_PHY_FSL_LYNX_28G is not set
# CONFIG_PHY_HI6220_USB is not set
# CONFIG_PHY_HI3660_USB is not set
# CONFIG_PHY_HI3670_USB is not set
# CONFIG_PHY_HI3670_PCIE is not set
# CONFIG_PHY_HISTB_COMBPHY is not set
# CONFIG_PHY_HISI_INNO_USB2 is not set
# CONFIG_PHY_LANTIQ_VRX200_PCIE is not set
# CONFIG_PHY_LANTIQ_RCU_USB2 is not set
# CONFIG_ARMADA375_USBCLUSTER_PHY is not set
# CONFIG_PHY_BERLIN_SATA is not set
# CONFIG_PHY_BERLIN_USB is not set
CONFIG_PHY_MVEBU_A3700_UTMI=y
# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=m
# CONFIG_PHY_PXA_USB is not set
# CONFIG_PHY_MMP3_USB is not set
# CONFIG_PHY_MMP3_HSIC is not set
# CONFIG_PHY_MTK_PCIE is not set
# CONFIG_PHY_MTK_TPHY is not set
# CONFIG_PHY_MTK_UFS is not set
# CONFIG_PHY_MTK_XSPHY is not set
# CONFIG_PHY_MTK_HDMI is not set
# CONFIG_PHY_MTK_MIPI_DSI is not set
# CONFIG_PHY_MTK_DP is not set
# CONFIG_PHY_SPARX5_SERDES is not set
# CONFIG_PHY_LAN966X_SERDES is not set
CONFIG_PHY_OCELOT_SERDES=m
# CONFIG_PHY_ATH79_USB is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_SS is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_MT7621_PCI is not set
# CONFIG_PHY_RALINK_USB is not set
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
# CONFIG_PHY_EXYNOS_PCIE is not set
# CONFIG_PHY_SAMSUNG_UFS is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB3 is not set
# CONFIG_PHY_UNIPHIER_PCIE is not set
CONFIG_PHY_UNIPHIER_AHCI=m
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
# CONFIG_PHY_STIH407_USB is not set
# CONFIG_PHY_STM32_USBPHYC is not set
# CONFIG_PHY_TEGRA194_P2U is not set
# CONFIG_PHY_DA8XX_USB is not set
# CONFIG_PHY_AM654_SERDES is not set
# CONFIG_PHY_J721E_WIZ is not set
# CONFIG_OMAP_CONTROL_PHY is not set
# CONFIG_TI_PIPE3 is not set
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
# CONFIG_PHY_INTEL_KEEMBAY_USB is not set
# CONFIG_PHY_INTEL_LGM_COMBO is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# CONFIG_PHY_INTEL_THUNDERBAY_EMMC is not set
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
CONFIG_MCB=y
CONFIG_MCB_LPC=m
# CONFIG_RAS is not set
#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android
CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_IMX_IIM is not set
# CONFIG_NVMEM_IMX_OCOTP is not set
# CONFIG_JZ4780_EFUSE is not set
# CONFIG_NVMEM_LPC18XX_EEPROM is not set
# CONFIG_NVMEM_LPC18XX_OTP is not set
# CONFIG_NVMEM_MXS_OCOTP is not set
# CONFIG_MTK_EFUSE is not set
# CONFIG_MICROCHIP_OTPC is not set
# CONFIG_NVMEM_NINTENDO_OTP is not set
# CONFIG_QCOM_QFPROM is not set
# CONFIG_NVMEM_SPMI_SDAM is not set
# CONFIG_ROCKCHIP_EFUSE is not set
# CONFIG_ROCKCHIP_OTP is not set
# CONFIG_NVMEM_BCM_OCOTP is not set
# CONFIG_NVMEM_STM32_ROMEM is not set
# CONFIG_UNIPHIER_EFUSE is not set
# CONFIG_NVMEM_VF610_OCOTP is not set
# CONFIG_MESON_MX_EFUSE is not set
# CONFIG_NVMEM_SNVS_LPGPR is not set
# CONFIG_SC27XX_EFUSE is not set
# CONFIG_SPRD_EFUSE is not set
# CONFIG_NVMEM_RMEM is not set
# CONFIG_NVMEM_BRCM_NVRAM is not set
# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
# CONFIG_NVMEM_SUNPLUS_OCOTP is not set
# CONFIG_NVMEM_APPLE_EFUSES is not set
#
# HW tracing support
#
# CONFIG_STM is not set
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_GTH=m
CONFIG_INTEL_TH_MSU=m
CONFIG_INTEL_TH_PTI=m
CONFIG_INTEL_TH_DEBUG=y
# end of HW tracing support
# CONFIG_FPGA is not set
CONFIG_FSI=m
# CONFIG_FSI_NEW_DEV_NODE is not set
CONFIG_FSI_MASTER_GPIO=m
# CONFIG_FSI_MASTER_HUB is not set
CONFIG_FSI_MASTER_ASPEED=m
# CONFIG_FSI_SCOM is not set
CONFIG_FSI_SBEFIFO=m
CONFIG_FSI_OCC=m
# CONFIG_TEE is not set
CONFIG_MULTIPLEXER=m
#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=m
# CONFIG_MUX_GPIO is not set
CONFIG_MUX_MMIO=m
# end of Multiplexer drivers
CONFIG_PM_OPP=y
CONFIG_SIOX=m
CONFIG_SIOX_BUS_GPIO=m
CONFIG_SLIMBUS=m
# CONFIG_SLIM_QCOM_CTRL is not set
CONFIG_INTERCONNECT=y
# CONFIG_INTERCONNECT_IMX is not set
# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
# CONFIG_INTERCONNECT_SAMSUNG is not set
CONFIG_COUNTER=y
# CONFIG_104_QUAD_8 is not set
# CONFIG_INTERRUPT_CNT is not set
# CONFIG_STM32_TIMER_CNT is not set
# CONFIG_STM32_LPTIMER_CNT is not set
# CONFIG_TI_EQEP is not set
CONFIG_FTM_QUADDEC=y
CONFIG_MICROCHIP_TCB_CAPTURE=m
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers
#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
# CONFIG_XFS_SUPPORT_V4 is not set
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
CONFIG_XFS_ONLINE_SCRUB=y
CONFIG_XFS_ONLINE_REPAIR=y
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_BTRFS_FS=m
# CONFIG_BTRFS_FS_POSIX_ACL is not set
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y
CONFIG_BTRFS_DEBUG=y
# CONFIG_BTRFS_ASSERT is not set
CONFIG_BTRFS_FS_REF_VERIFY=y
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
CONFIG_F2FS_CHECK_FS=y
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_F2FS_FS_COMPRESSION is not set
CONFIG_F2FS_IOSTAT=y
CONFIG_ZONEFS_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
# CONFIG_FS_ENCRYPTION_INLINE_CRYPT is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_AUTOFS_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_VIRTIO_FS=m
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_NFS_EXPORT=y
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_DEBUG=y
CONFIG_CACHEFILES=m
CONFIG_CACHEFILES_DEBUG=y
# CONFIG_CACHEFILES_ERROR_INJECTION is not set
# CONFIG_CACHEFILES_ONDEMAND is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
CONFIG_EXFAT_FS=m
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=m
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=m
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=m
# CONFIG_NLS_MAC_CROATIAN is not set
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=y
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=m
# CONFIG_USER_DECRYPTED_DATA is not set
CONFIG_KEY_DH_OPERATIONS=y
# CONFIG_KEY_NOTIFICATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_STACK_ALL_PATTERN is not set
# CONFIG_INIT_STACK_ALL_ZERO is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECDSA is not set
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_SM2=m
CONFIG_CRYPTO_CURVE25519=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=m
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=m
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_NHPOLY1305=m
CONFIG_CRYPTO_ADIANTUM=m
# CONFIG_CRYPTO_HCTR2 is not set
CONFIG_CRYPTO_ESSIV=m
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_XXHASH=y
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CRCT10DIF=m
# CONFIG_CRYPTO_CRC64_ROCKSOFT is not set
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_POLY1305=m
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=m
# CONFIG_CRYPTO_SM3_GENERIC is not set
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_CHACHA20=m
# CONFIG_CRYPTO_ARIA is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SM4_GENERIC is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=m
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
CONFIG_CRYPTO_ZSTD=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_KDF800108_CTR=y
CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_LINEAR_RANGES=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_CORDIC=m
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_LIB_MEMNEQ=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
# CONFIG_CRC64_ROCKSOFT is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=m
CONFIG_CRC4=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_CRC8=m
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=m
CONFIG_842_DECOMPRESS=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=m
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC16=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=m
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
CONFIG_DMA_NONCOHERENT_MMAP=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_DIRECT_REMAP=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_SG_POOL=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_ALWAYS_INIT=y
CONFIG_SBITMAP=y
# CONFIG_PARMAN is not set
# CONFIG_OBJAGG is not set
# end of Library routines
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
# CONFIG_KGDB_HONOUR_BLOCKLIST is not set
# CONFIG_KGDB_SERIAL_CONSOLE is not set
CONFIG_KGDB_TESTS=y
CONFIG_KGDB_TESTS_ON_BOOT=y
CONFIG_KGDB_TESTS_BOOT_STRING="V1F100"
# CONFIG_KGDB_KDB is not set
# CONFIG_UBSAN is not set
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB_DEBUG_ON=y
CONFIG_PAGE_OWNER=y
CONFIG_PAGE_POISONING=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
# CONFIG_DEBUG_OBJECTS_FREE is not set
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_VMACACHE=y
CONFIG_DEBUG_VM_RB=y
# CONFIG_DEBUG_VM_PGFLAGS is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_DEBUG_KMAP_LOCAL=y
CONFIG_DEBUG_HIGHMEM=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
# CONFIG_WQ_WATCHDOG is not set
CONFIG_TEST_LOCKUP=m
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging
CONFIG_DEBUG_TIMEKEEPING=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=y
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_SCF_TORTURE_TEST=y
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_KOBJECT_RELEASE=y
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_TORTURE_TEST=y
CONFIG_RCU_SCALE_TEST=m
CONFIG_RCU_TORTURE_TEST=y
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
CONFIG_RCU_STRICT_GRACE_PERIOD=y
# end of RCU Debugging
CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
#
# arc Debugging
#
CONFIG_16KSTACKS=y
# end of arc Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
CONFIG_NOTIFIER_ERROR_INJECTION=m
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=m
# CONFIG_FAULT_INJECTION is not set
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=m
# CONFIG_TEST_MIN_HEAP is not set
# CONFIG_TEST_DIV64 is not set
CONFIG_BACKTRACE_SELF_TEST=m
# CONFIG_TEST_REF_TRACKER is not set
CONFIG_RBTREE_TEST=m
CONFIG_REED_SOLOMON_TEST=y
CONFIG_INTERVAL_TREE_TEST=m
# CONFIG_PERCPU_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_TEST_HEXDUMP=m
CONFIG_STRING_SELFTEST=m
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_STRSCPY=y
CONFIG_TEST_KSTRTOX=y
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_SCANF is not set
CONFIG_TEST_BITMAP=m
CONFIG_TEST_UUID=m
# CONFIG_TEST_XARRAY is not set
CONFIG_TEST_RHASHTABLE=y
# CONFIG_TEST_SIPHASH is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_BITOPS is not set
# CONFIG_TEST_VMALLOC is not set
# CONFIG_TEST_USER_COPY is not set
CONFIG_FIND_BIT_BENCHMARK=m
# CONFIG_TEST_FIRMWARE is not set
CONFIG_TEST_SYSCTL=y
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
# CONFIG_TEST_MEMCAT_P is not set
CONFIG_TEST_MEMINIT=m
# CONFIG_TEST_FREE_PAGES is not set
# end of Kernel Testing and Coverage
# CONFIG_WARN_MISSING_DOCUMENTS is not set
# CONFIG_WARN_ABI_ERRORS is not set
# end of Kernel hacking
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 3/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
@ 2022-09-02 11:53 kernel test robot
0 siblings, 0 replies; 29+ messages in thread
From: kernel test robot @ 2022-09-02 11:53 UTC (permalink / raw)
To: kbuild
[-- Attachment #1: Type: text/plain, Size: 14715 bytes --]
::::::
:::::: Manual check reason: "low confidence static check warning: drivers/tty/serial/rp2.c:428:8: sparse: sparse: Trying to use reserved word 'void' as identifier"
::::::
BCC: lkp(a)intel.com
CC: kbuild-all(a)lists.01.org
In-Reply-To: <20220901110657.3305-4-jslaby@suse.cz>
References: <20220901110657.3305-4-jslaby@suse.cz>
TO: Jiri Slaby <jslaby@suse.cz>
Hi Jiri,
I love your patch! Perhaps something to improve:
[auto build test WARNING on tty/tty-testing]
[also build test WARNING on usb/usb-testing shawnguo/for-next linus/master v6.0-rc3 next-20220901]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Jiri-Slaby/tty-TX-helpers/20220901-190806
base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-testing
:::::: branch date: 25 hours ago
:::::: commit date: 25 hours ago
config: riscv-randconfig-s051-20220901
compiler: riscv64-linux-gcc (GCC) 12.1.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-39-gce1a6720-dirty
# https://github.com/intel-lab-lkp/linux/commit/f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Jiri-Slaby/tty-TX-helpers/20220901-190806
git checkout f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=riscv SHELL=/bin/bash drivers/tty/serial/
If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
WARNING: invalid argument to '-march': '_zihintpause'
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got ;
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got &&
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got --
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got {
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got __raw_writeb
>> drivers/tty/serial/rp2.c:428:8: sparse: sparse: Trying to use reserved word 'void' as identifier
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got }
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got ->
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got }
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got {
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got __raw_writeb
>> drivers/tty/serial/rp2.c:428:8: sparse: sparse: Trying to use reserved word 'void' as identifier
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got }
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got ->
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got }
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got <
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got ==
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got }
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ;@the end of type declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got }
drivers/tty/serial/rp2.c:428:8: sparse: sparse: symbol 'mmiowb_set_pending' redeclared with different type (different base types):
>> drivers/tty/serial/rp2.c:428:8: sparse: int static [signed] [toplevel] mmiowb_set_pending( ... )
drivers/tty/serial/rp2.c: note: in included file (through arch/riscv/include/asm/mmiowb.h, include/linux/spinlock.h, include/linux/swait.h, ...):
include/asm-generic/mmiowb.h:35:20: sparse: note: previously declared as:
include/asm-generic/mmiowb.h:35:20: sparse: void static inline [gnu_inline] [toplevel] mmiowb_set_pending( ... )
drivers/tty/serial/rp2.c:428:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/rp2.c:428:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/rp2.c:428:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
drivers/tty/serial/rp2.c:428:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/rp2.c:428:8: sparse: note: previously declared as:
drivers/tty/serial/rp2.c:428:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/rp2.c:428:8: sparse: sparse: symbol 'mmiowb_set_pending' redeclared with different type (different base types):
>> drivers/tty/serial/rp2.c:428:8: sparse: int static [signed] [toplevel] mmiowb_set_pending( ... )
include/asm-generic/mmiowb.h:35:20: sparse: note: previously declared as:
include/asm-generic/mmiowb.h:35:20: sparse: void static inline [gnu_inline] [toplevel] mmiowb_set_pending( ... )
drivers/tty/serial/rp2.c:428:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/rp2.c:428:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/rp2.c:428:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
drivers/tty/serial/rp2.c:428:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/rp2.c:428:8: sparse: note: previously declared as:
drivers/tty/serial/rp2.c:428:8: sparse: unsigned int [addressable] [toplevel] pending
drivers/tty/serial/rp2.c:449:29: sparse: sparse: too many arguments for function rp2_tx_chars
--
WARNING: invalid argument to '-march': '_zihintpause'
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got ;
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got &&
>> drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Trying to use reserved word 'do' as identifier
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got {
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got --
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got {
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got __raw_writel
>> drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Trying to use reserved word 'void' as identifier
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got ->
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got {
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got __raw_writel
>> drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Trying to use reserved word 'void' as identifier
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got ->
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got <
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got ==
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ;@the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: undefined identifier 'port'
>> drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: cast from unknown type
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: symbol 'mmiowb_set_pending' redeclared with different type (different base types):
>> drivers/tty/serial/mvebu-uart.c:336:8: sparse: int static [signed] [toplevel] mmiowb_set_pending( ... )
drivers/tty/serial/mvebu-uart.c: note: in included file (through arch/riscv/include/asm/mmiowb.h, include/linux/spinlock.h, include/linux/rwsem.h, ...):
include/asm-generic/mmiowb.h:35:20: sparse: note: previously declared as:
include/asm-generic/mmiowb.h:35:20: sparse: void static inline [gnu_inline] [toplevel] mmiowb_set_pending( ... )
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
drivers/tty/serial/mvebu-uart.c:336:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/mvebu-uart.c:336:8: sparse: note: previously declared as:
drivers/tty/serial/mvebu-uart.c:336:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: symbol 'mmiowb_set_pending' redeclared with different type (different base types):
>> drivers/tty/serial/mvebu-uart.c:336:8: sparse: int static [signed] [toplevel] mmiowb_set_pending( ... )
include/asm-generic/mmiowb.h:35:20: sparse: note: previously declared as:
include/asm-generic/mmiowb.h:35:20: sparse: void static inline [gnu_inline] [toplevel] mmiowb_set_pending( ... )
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
drivers/tty/serial/mvebu-uart.c:336:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/mvebu-uart.c:336:8: sparse: note: previously declared as:
drivers/tty/serial/mvebu-uart.c:336:8: sparse: unsigned int [addressable] [toplevel] pending
drivers/tty/serial/mvebu-uart.c:343:31: sparse: sparse: too many arguments for function mvebu_uart_do_tx_chars
vim +/void +428 drivers/tty/serial/rp2.c
7d9f49afa451d8 Kevin Cernekee 2013-01-16 427
f6f99189d77ea4 Jiri Slaby 2022-09-01 @428 static DEFINE_UART_PORT_TX_HELPER_LIMITED(rp2_tx_chars, port, ch,
f6f99189d77ea4 Jiri Slaby 2022-09-01 429 true,
f6f99189d77ea4 Jiri Slaby 2022-09-01 430 writeb(ch, port_to_up(port)->base + RP2_DATA_BYTE),
f6f99189d77ea4 Jiri Slaby 2022-09-01 431 ({}));
7d9f49afa451d8 Kevin Cernekee 2013-01-16 432
--
0-DAY CI Kernel Test Service
https://01.org/lkp
[-- Attachment #2: config.ksh --]
[-- Type: text/plain, Size: 194714 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/riscv 6.0.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="riscv64-linux-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
# CONFIG_TIME_KUNIT_TEST is not set
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
# CONFIG_BPF_JIT is not set
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# end of BPF subsystem
CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_IKHEADERS=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_GENERIC_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
# CONFIG_MEMCG is not set
CONFIG_BLK_CGROUP=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_MISC is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_TIME_NS=y
# CONFIG_IPC_NS is not set
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
# CONFIG_EXPERT is not set
CONFIG_MULTIUSER=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_RSEQ=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# end of Kernel Performance Events And Counters
CONFIG_SYSTEM_DATA_VERIFICATION=y
# CONFIG_PROFILING is not set
# end of General setup
CONFIG_64BIT=y
CONFIG_RISCV=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=24
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
CONFIG_RISCV_SBI=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0xff60000000000000
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_LOCKDEP_SUPPORT=y
#
# SoC selection
#
# CONFIG_SOC_MICROCHIP_POLARFIRE is not set
# CONFIG_SOC_SIFIVE is not set
# CONFIG_SOC_STARFIVE is not set
# CONFIG_SOC_VIRT is not set
# end of SoC selection
#
# CPU errata selection
#
# CONFIG_ERRATA_SIFIVE is not set
# CONFIG_ERRATA_THEAD is not set
# end of CPU errata selection
#
# Platform type
#
# CONFIG_NONPORTABLE is not set
CONFIG_ARCH_RV64I=y
CONFIG_CMODEL_MEDLOW=y
# CONFIG_CMODEL_MEDANY is not set
CONFIG_MODULE_SECTIONS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
# CONFIG_HOTPLUG_CPU is not set
CONFIG_TUNE_GENERIC=y
# CONFIG_NUMA is not set
CONFIG_RISCV_ALTERNATIVE=y
CONFIG_RISCV_ISA_C=y
CONFIG_RISCV_ISA_SVPBMT=y
# CONFIG_FPU is not set
# end of Platform type
#
# Kernel features
#
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_RISCV_SBI_V01=y
CONFIG_RISCV_BOOT_SPINWAIT=y
# CONFIG_KEXEC is not set
# CONFIG_KEXEC_FILE is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_COMPAT=y
# end of Kernel features
#
# Boot options
#
CONFIG_CMDLINE=""
CONFIG_EFI_STUB=y
CONFIG_EFI=y
CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
CONFIG_STACKPROTECTOR_PER_TASK=y
# end of Boot options
CONFIG_PORTABLE=y
#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_PM_GENERIC_DOMAINS_OF=y
# end of Power management options
#
# CPU Power Management
#
#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# end of CPU Idle
# end of CPU Power Management
# CONFIG_VIRTUALIZATION is not set
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
CONFIG_STATIC_KEYS_SELFTEST=y
CONFIG_HAVE_64BIT_ALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR_STRONG is not set
CONFIG_LTO_NONE=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=18
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_CLONE_BACKWARDS=y
# CONFIG_COMPAT_32BIT_TIME is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
# CONFIG_STRICT_KERNEL_RWX is not set
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_FORCE=y
# CONFIG_MODULE_SIG_ALL is not set
#
# Do not forget to sign required modules with scripts/sign-file
#
CONFIG_MODULE_SIG_SHA1=y
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha1"
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_DEV_THROTTLING is not set
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_CGROUP_IOLATENCY=y
# CONFIG_BLK_CGROUP_FC_APPID is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_CGROUP_IOPRIO is not set
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
# CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_AMIGA_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=m
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_MMIOWB=y
CONFIG_MMIOWB=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
CONFIG_ARCH_HAS_BINFMT_FLAT=y
# CONFIG_BINFMT_FLAT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SWAP=y
# CONFIG_ZSWAP is not set
#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
# CONFIG_SLAB_FREELIST_HARDENED is not set
CONFIG_SLUB_STATS=y
CONFIG_SLUB_CPU_PARTIAL=y
# end of SLAB allocator options
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_COMPAT_BRK=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
# CONFIG_COMPACTION is not set
CONFIG_PAGE_REPORTING=y
CONFIG_PHYS_ADDR_T_64BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CMA is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ZONE_DMA32=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PERCPU_STATS=y
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_SECRETMEM=y
# CONFIG_ANON_VMA_NAME is not set
CONFIG_USERFAULTFD=y
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
CONFIG_TLS_TOE=y
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=y
CONFIG_XFRM_ESP=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_XFRM_ESPINTCP=y
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=m
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_ESP_OFFLOAD=y
CONFIG_INET_ESPINTCP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_NV=m
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
CONFIG_TCP_CONG_YEAH=y
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_TCP_CONG_DCTCP=m
# CONFIG_TCP_CONG_CDG is not set
CONFIG_TCP_CONG_BBR=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
CONFIG_NETLABEL=y
CONFIG_MPTCP=y
# CONFIG_MPTCP_KUNIT_TEST is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_INGRESS is not set
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_FAMILY_ARP=y
# CONFIG_NETFILTER_NETLINK_HOOK is not set
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NETFILTER_NETLINK_OSF=y
# CONFIG_NF_CONNTRACK is not set
CONFIG_NF_LOG_SYSLOG=y
CONFIG_NF_TABLES=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
# CONFIG_NFT_LOG is not set
CONFIG_NFT_LIMIT=y
# CONFIG_NFT_TUNNEL is not set
CONFIG_NFT_OBJREF=m
CONFIG_NFT_QUEUE=y
# CONFIG_NFT_QUOTA is not set
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=y
# CONFIG_NFT_HASH is not set
CONFIG_NFT_XFRM=m
# CONFIG_NFT_SOCKET is not set
CONFIG_NFT_OSF=m
CONFIG_NFT_TPROXY=y
CONFIG_NF_DUP_NETDEV=y
# CONFIG_NFT_DUP_NETDEV is not set
# CONFIG_NFT_FWD_NETDEV is not set
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XTABLES_COMPAT=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
# CONFIG_NETFILTER_XT_SET is not set
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=y
CONFIG_NETFILTER_XT_TARGET_HMARK=y
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_TEE=m
# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CPU=y
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ECN=m
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
# CONFIG_NETFILTER_XT_MATCH_HL is not set
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
CONFIG_NETFILTER_XT_MATCH_MARK=m
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=y
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=y
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
CONFIG_NETFILTER_XT_MATCH_U32=m
# end of Core Netfilter Configuration
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
# CONFIG_IP_SET_BITMAP_IP is not set
CONFIG_IP_SET_BITMAP_IPMAC=m
# CONFIG_IP_SET_BITMAP_PORT is not set
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
# CONFIG_IP_SET_HASH_IPPORT is not set
# CONFIG_IP_SET_HASH_IPPORTIP is not set
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_IPMAC=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
# CONFIG_IP_SET_HASH_NETNET is not set
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
# CONFIG_IP_SET_LIST_SET is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=y
# CONFIG_NF_TABLES_IPV4 is not set
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=m
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=y
CONFIG_NF_REJECT_IPV4=y
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=y
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=y
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=y
# CONFIG_IP_NF_ARPFILTER is not set
CONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
# CONFIG_SCTP_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_RDS=m
CONFIG_RDS_TCP=m
CONFIG_RDS_DEBUG=y
CONFIG_TIPC=y
CONFIG_TIPC_MEDIA_UDP=y
# CONFIG_TIPC_CRYPTO is not set
# CONFIG_TIPC_DIAG is not set
# CONFIG_ATM is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
# CONFIG_L2TP_ETH is not set
# CONFIG_BRIDGE is not set
CONFIG_NET_DSA=m
CONFIG_NET_DSA_TAG_AR9331=m
CONFIG_NET_DSA_TAG_BRCM_COMMON=m
CONFIG_NET_DSA_TAG_BRCM=m
# CONFIG_NET_DSA_TAG_BRCM_LEGACY is not set
CONFIG_NET_DSA_TAG_BRCM_PREPEND=m
# CONFIG_NET_DSA_TAG_HELLCREEK is not set
CONFIG_NET_DSA_TAG_GSWIP=m
CONFIG_NET_DSA_TAG_DSA_COMMON=m
CONFIG_NET_DSA_TAG_DSA=m
CONFIG_NET_DSA_TAG_EDSA=m
CONFIG_NET_DSA_TAG_MTK=m
CONFIG_NET_DSA_TAG_KSZ=m
CONFIG_NET_DSA_TAG_OCELOT=m
CONFIG_NET_DSA_TAG_OCELOT_8021Q=m
# CONFIG_NET_DSA_TAG_QCA is not set
CONFIG_NET_DSA_TAG_RTL4_A=m
# CONFIG_NET_DSA_TAG_RTL8_4 is not set
# CONFIG_NET_DSA_TAG_RZN1_A5PSW is not set
CONFIG_NET_DSA_TAG_LAN9303=m
CONFIG_NET_DSA_TAG_SJA1105=m
CONFIG_NET_DSA_TAG_TRAILER=m
# CONFIG_NET_DSA_TAG_XRS700X is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_VLAN_8021Q_MVRP is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
CONFIG_X25=y
CONFIG_LAPB=m
CONFIG_PHONET=y
CONFIG_IEEE802154=m
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
CONFIG_IEEE802154_SOCKET=m
CONFIG_MAC802154=m
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_DNS_RESOLVER is not set
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_BATMAN_V is not set
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_OPENVSWITCH=y
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=y
CONFIG_OPENVSWITCH_GENEVE=m
CONFIG_VSOCKETS=y
# CONFIG_VSOCKETS_DIAG is not set
CONFIG_VSOCKETS_LOOPBACK=y
CONFIG_VIRTIO_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=m
# CONFIG_MPLS_IPTUNNEL is not set
CONFIG_NET_NSH=y
CONFIG_HSR=y
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_QRTR is not set
CONFIG_NET_NCSI=y
# CONFIG_NCSI_OEM_CMD_GET_MAC is not set
# CONFIG_NCSI_OEM_CMD_KEEP_PHY is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# end of Network testing
# end of Networking options
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not set
# CONFIG_NETROM is not set
# CONFIG_ROSE is not set
#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not set
# CONFIG_BPQETHER is not set
CONFIG_BAYCOM_SER_FDX=y
# CONFIG_BAYCOM_SER_HDX is not set
CONFIG_YAM=y
# end of AX.25 network device drivers
# CONFIG_CAN is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
# CONFIG_BT_BNEP_MC_FILTER is not set
# CONFIG_BT_BNEP_PROTO_FILTER is not set
CONFIG_BT_HIDP=y
CONFIG_BT_HS=y
# CONFIG_BT_LE is not set
CONFIG_BT_LEDS=y
# CONFIG_BT_MSFTEXT is not set
# CONFIG_BT_AOSPEXT is not set
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_FEATURE_DEBUG is not set
#
# Bluetooth device drivers
#
CONFIG_BT_QCA=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
# CONFIG_BT_HCIUART_BCSP is not set
CONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_INTEL is not set
# CONFIG_BT_HCIUART_AG6XX is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_QCOMSMD=m
# CONFIG_BT_VIRTIO is not set
# end of Bluetooth device drivers
# CONFIG_AF_RXRPC is not set
CONFIG_AF_KCM=m
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
# CONFIG_CFG80211_DEFAULT_PS is not set
CONFIG_CFG80211_DEBUGFS=y
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_CFG80211_WEXT_EXPORT=y
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
# CONFIG_MAC80211_LEDS is not set
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=m
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
CONFIG_CEPH_LIB_PRETTYDEBUG=y
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
# CONFIG_NFC_NCI is not set
CONFIG_NFC_HCI=m
CONFIG_NFC_SHDLC=y
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_TRF7970A=m
CONFIG_NFC_SIM=m
CONFIG_NFC_PN544=m
CONFIG_NFC_PN544_I2C=m
# CONFIG_NFC_PN533_I2C is not set
CONFIG_NFC_MICROREAD=m
CONFIG_NFC_MICROREAD_I2C=m
# CONFIG_NFC_ST21NFCA_I2C is not set
CONFIG_NFC_ST95HF=m
# end of Near Field Communication (NFC) devices
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
# CONFIG_LWTUNNEL_BPF is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=y
# CONFIG_ETHTOOL_NETLINK is not set
# CONFIG_NETDEV_ADDR_LIST_TEST is not set
#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEFAULT is not set
CONFIG_PCIEASPM_POWERSAVE=y
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_ECAM=y
CONFIG_PCI_BRIDGE_EMUL=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_PRI=y
# CONFIG_PCI_PASID is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_CPCI=y
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# PCI controller drivers
#
CONFIG_PCI_AARDVARK=m
# CONFIG_PCIE_XILINX_NWL is not set
# CONFIG_PCI_FTPCI100 is not set
CONFIG_PCI_TEGRA=y
# CONFIG_PCIE_RCAR_HOST is not set
CONFIG_PCIE_RCAR_EP=y
CONFIG_PCI_HOST_COMMON=y
CONFIG_PCI_HOST_GENERIC=m
# CONFIG_PCIE_XILINX is not set
# CONFIG_PCIE_XILINX_CPM is not set
CONFIG_PCI_XGENE=y
# CONFIG_PCI_XGENE_MSI is not set
CONFIG_PCI_V3_SEMI=y
CONFIG_PCI_VERSATILE=y
# CONFIG_PCIE_ALTERA is not set
CONFIG_PCI_HOST_THUNDER_PEM=y
# CONFIG_PCI_HOST_THUNDER_ECAM is not set
CONFIG_PCIE_ROCKCHIP=y
CONFIG_PCIE_ROCKCHIP_HOST=m
# CONFIG_PCIE_ROCKCHIP_EP is not set
CONFIG_PCIE_MEDIATEK=m
# CONFIG_PCIE_MEDIATEK_GEN3 is not set
CONFIG_PCIE_BRCMSTB=m
# CONFIG_PCI_LOONGSON is not set
# CONFIG_PCIE_MICROCHIP_HOST is not set
# CONFIG_PCIE_APPLE is not set
# CONFIG_PCIE_MT7621 is not set
#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_EP=y
CONFIG_PCI_DRA7XX=y
CONFIG_PCI_DRA7XX_HOST=y
CONFIG_PCI_DRA7XX_EP=y
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCIE_DW_PLAT_EP is not set
CONFIG_PCI_EXYNOS=y
# CONFIG_PCI_IMX6 is not set
# CONFIG_PCIE_SPEAR13XX is not set
# CONFIG_PCI_KEYSTONE_HOST is not set
# CONFIG_PCI_KEYSTONE_EP is not set
# CONFIG_PCI_LAYERSCAPE is not set
# CONFIG_PCI_LAYERSCAPE_EP is not set
# CONFIG_PCI_HISI is not set
# CONFIG_PCIE_QCOM is not set
# CONFIG_PCIE_QCOM_EP is not set
# CONFIG_PCIE_ARMADA_8K is not set
CONFIG_PCIE_ARTPEC6=y
CONFIG_PCIE_ARTPEC6_HOST=y
# CONFIG_PCIE_ARTPEC6_EP is not set
# CONFIG_PCIE_ROCKCHIP_DW_HOST is not set
CONFIG_PCIE_INTEL_GW=y
# CONFIG_PCIE_KEEMBAY_HOST is not set
# CONFIG_PCIE_KEEMBAY_EP is not set
CONFIG_PCIE_KIRIN=y
# CONFIG_PCIE_HISI_STB is not set
CONFIG_PCI_MESON=m
CONFIG_PCIE_TEGRA194=y
# CONFIG_PCIE_TEGRA194_HOST is not set
CONFIG_PCIE_TEGRA194_EP=y
# CONFIG_PCIE_VISCONTI_HOST is not set
CONFIG_PCIE_UNIPHIER=y
CONFIG_PCIE_UNIPHIER_EP=y
CONFIG_PCIE_AL=y
# CONFIG_PCIE_FU740 is not set
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
CONFIG_PCIE_MOBIVEIL=y
CONFIG_PCIE_MOBIVEIL_HOST=y
CONFIG_PCIE_MOBIVEIL_PLAT=y
# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
CONFIG_PCIE_CADENCE=y
CONFIG_PCIE_CADENCE_HOST=y
CONFIG_PCIE_CADENCE_PLAT=y
CONFIG_PCIE_CADENCE_PLAT_HOST=y
# CONFIG_PCIE_CADENCE_PLAT_EP is not set
CONFIG_PCI_J721E=y
CONFIG_PCI_J721E_HOST=y
# CONFIG_PCI_J721E_EP is not set
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
CONFIG_PCI_EPF_TEST=y
# CONFIG_PCI_EPF_NTB is not set
# CONFIG_PCI_EPF_VNTB is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=m
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
# CONFIG_FW_LOADER_COMPRESS is not set
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_SPMI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SCCB=m
CONFIG_REGMAP_SPI_AVMM=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
CONFIG_GENERIC_ARCH_TOPOLOGY=y
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
# CONFIG_MOXTET is not set
# CONFIG_HISILICON_LPC is not set
# CONFIG_INTEL_IXP4XX_EB is not set
# CONFIG_QCOM_EBI2 is not set
CONFIG_MHI_BUS=m
CONFIG_MHI_BUS_DEBUG=y
# CONFIG_MHI_BUS_PCI_GENERIC is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
CONFIG_CONNECTOR=m
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# CONFIG_ARM_SCMI_PROTOCOL is not set
# CONFIG_ARM_SCMI_POWER_DOMAIN is not set
# CONFIG_ARM_SCMI_POWER_CONTROL is not set
# end of ARM System Control and Management Interface Protocol
CONFIG_ARM_SCPI_POWER_DOMAIN=m
CONFIG_QCOM_SCM=y
# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
# CONFIG_SYSFB_SIMPLEFB is not set
CONFIG_BCM47XX_NVRAM=y
CONFIG_BCM47XX_SPROM=y
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_ESRT=y
CONFIG_EFI_PARAMS_FROM_FDT=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_GENERIC_STUB=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_EFI_RCI2_TABLE is not set
# CONFIG_EFI_DISABLE_PCI_DMA is not set
CONFIG_EFI_EARLYCON=y
# CONFIG_EFI_DISABLE_RUNTIME is not set
# CONFIG_EFI_COCO_SECRET is not set
# end of EFI (Extensible Firmware Interface) Support
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_MTD_NAND_ECC_MXIC is not set
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
CONFIG_OF_ALL_DTBS=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_OF_DMA_DEFAULT_COHERENT=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
#
# NVME Support
#
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=m
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_VERBOSE_ERRORS is not set
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_AUTH is not set
# CONFIG_NVME_TARGET is not set
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
CONFIG_DUMMY_IRQ=y
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
CONFIG_ICS932S401=y
CONFIG_ATMEL_SSC=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_GEHC_ACHC is not set
# CONFIG_HI6421V600_IRQ is not set
CONFIG_HP_ILO=m
CONFIG_QCOM_COINCELL=m
# CONFIG_QCOM_FASTRPC is not set
CONFIG_APDS9802ALS=m
# CONFIG_ISL29003 is not set
CONFIG_ISL29020=m
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=m
# CONFIG_DS1682 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
CONFIG_SRAM=y
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
CONFIG_MISC_RTSX=m
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
CONFIG_C2PORT=m
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=m
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=m
CONFIG_EEPROM_93XX46=m
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_SPI=m
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_ALTERA_STAPL=m
# CONFIG_GENWQE is not set
CONFIG_ECHO=m
# CONFIG_BCM_VK is not set
CONFIG_MISC_ALCOR_PCI=y
CONFIG_MISC_RTSX_PCI=m
CONFIG_HABANA_AI=m
# CONFIG_UACCE is not set
CONFIG_PVPANIC=y
# CONFIG_PVPANIC_MMIO is not set
# CONFIG_PVPANIC_PCI is not set
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
CONFIG_BE2ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_ACARD=m
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_HISI_SAS is not set
# CONFIG_SCSI_MVSAS is not set
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_ADVANSYS=m
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
# CONFIG_MEGARAID_MAILBOX is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
CONFIG_SCSI_SMARTPQI=m
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_SCSI_MYRB=m
CONFIG_SCSI_MYRS=m
# CONFIG_LIBFC is not set
CONFIG_SCSI_SNIC=m
CONFIG_SCSI_SNIC_DEBUG_FS=y
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_FDOMAIN=m
CONFIG_SCSI_FDOMAIN_PCI=m
CONFIG_SCSI_IPS=m
# CONFIG_SCSI_INITIO is not set
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_MMIO is not set
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_QLOGIC_1280=m
# CONFIG_SCSI_QLA_FC is not set
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_AM53C974=m
CONFIG_SCSI_WD719X=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
CONFIG_SCSI_DH_ALUA=m
# end of SCSI device support
CONFIG_ATA=m
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_ATA_FORCE=y
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_AHCI_BRCM is not set
# CONFIG_AHCI_DA850 is not set
# CONFIG_AHCI_DM816 is not set
# CONFIG_AHCI_IMX is not set
CONFIG_AHCI_CEVA=m
# CONFIG_AHCI_MTK is not set
# CONFIG_AHCI_MVEBU is not set
# CONFIG_AHCI_SUNXI is not set
# CONFIG_AHCI_TEGRA is not set
# CONFIG_AHCI_XGENE is not set
# CONFIG_AHCI_QORIQ is not set
# CONFIG_SATA_FSL is not set
CONFIG_SATA_GEMINI=m
# CONFIG_SATA_AHCI_SEATTLE is not set
CONFIG_SATA_INIC162X=m
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
CONFIG_SATA_HIGHBANK=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_RCAR is not set
# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=m
# CONFIG_PATA_ARTOP is not set
CONFIG_PATA_ATIIXP=m
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_BK3710 is not set
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CS5520 is not set
CONFIG_PATA_CS5530=m
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_FTIDE010 is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
# CONFIG_PATA_IMX is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PDC2027X=m
# CONFIG_PATA_PDC_OLD is not set
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RDC=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
CONFIG_PATA_TRIFLEX=m
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_PXA is not set
CONFIG_PATA_WINBOND=m
#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
# CONFIG_PATA_IXP4XX_CF is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
CONFIG_PATA_OPTI=m
CONFIG_PATA_RZ1000=m
# CONFIG_PATA_SAMSUNG_CF is not set
#
# Generic fallback / legacy drivers
#
CONFIG_ATA_GENERIC=m
CONFIG_PATA_LEGACY=m
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
# CONFIG_FIREWIRE_OHCI is not set
CONFIG_FIREWIRE_SBP2=m
# CONFIG_FIREWIRE_NET is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_WIREGUARD=y
# CONFIG_WIREGUARD_DEBUG is not set
CONFIG_EQUALIZER=y
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
CONFIG_IPVLAN_L3S=y
CONFIG_IPVLAN=y
CONFIG_IPVTAP=y
CONFIG_VXLAN=y
CONFIG_GENEVE=m
# CONFIG_BAREUDP is not set
CONFIG_GTP=y
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=m
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_NTB_NETDEV is not set
CONFIG_TUN=m
CONFIG_TAP=y
CONFIG_TUN_VNET_CROSS_LE=y
CONFIG_VETH=m
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=y
# CONFIG_MHI_NET is not set
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=y
CONFIG_ARCNET_RAW=y
# CONFIG_ARCNET_CAP is not set
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
# CONFIG_ARCNET_RIM_I is not set
# CONFIG_ARCNET_COM20020 is not set
#
# Distributed Switch Architecture drivers
#
# CONFIG_B53 is not set
# CONFIG_NET_DSA_BCM_SF2 is not set
CONFIG_NET_DSA_LOOP=m
# CONFIG_NET_DSA_LANTIQ_GSWIP is not set
CONFIG_NET_DSA_MT7530=m
CONFIG_NET_DSA_MV88E6060=m
CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=m
CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C=m
# CONFIG_NET_DSA_MICROCHIP_KSZ_SPI is not set
# CONFIG_NET_DSA_MICROCHIP_KSZ8863_SMI is not set
CONFIG_NET_DSA_MV88E6XXX=m
# CONFIG_NET_DSA_MV88E6XXX_PTP is not set
# CONFIG_NET_DSA_MSCC_FELIX is not set
CONFIG_NET_DSA_MSCC_SEVILLE=m
# CONFIG_NET_DSA_AR9331 is not set
# CONFIG_NET_DSA_QCA8K is not set
# CONFIG_NET_DSA_SJA1105 is not set
# CONFIG_NET_DSA_XRS700X_I2C is not set
# CONFIG_NET_DSA_XRS700X_MDIO is not set
# CONFIG_NET_DSA_REALTEK is not set
CONFIG_NET_DSA_SMSC_LAN9303=m
CONFIG_NET_DSA_SMSC_LAN9303_I2C=m
# CONFIG_NET_DSA_SMSC_LAN9303_MDIO is not set
CONFIG_NET_DSA_VITESSE_VSC73XX=m
CONFIG_NET_DSA_VITESSE_VSC73XX_SPI=m
CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=m
# end of Distributed Switch Architecture drivers
CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
CONFIG_TYPHOON=m
# CONFIG_NET_VENDOR_ACTIONS is not set
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=y
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
CONFIG_SLICOSS=m
# CONFIG_NET_VENDOR_ALTEON is not set
CONFIG_ALTERA_TSE=m
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_XGENE is not set
CONFIG_NET_XGENE_V2=m
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_AQTION=y
CONFIG_NET_VENDOR_ARC=y
CONFIG_ARC_EMAC_CORE=y
CONFIG_ARC_EMAC=y
# CONFIG_EMAC_ROCKCHIP is not set
CONFIG_NET_VENDOR_ASIX=y
# CONFIG_SPI_AX88796C is not set
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=y
CONFIG_ATL1E=m
CONFIG_ATL1C=y
CONFIG_ALX=m
# CONFIG_CX_ECAT is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CADENCE is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
# CONFIG_CHELSIO_T4 is not set
CONFIG_CHELSIO_T4VF=m
CONFIG_CHELSIO_LIB=m
CONFIG_NET_VENDOR_CIRRUS=y
# CONFIG_CS89x0_PLATFORM is not set
# CONFIG_EP93XX_ETH is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_NET_VENDOR_CORTINA is not set
CONFIG_NET_VENDOR_DAVICOM=y
# CONFIG_DM9000 is not set
# CONFIG_DM9051 is not set
CONFIG_DNET=y
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
# CONFIG_NET_VENDOR_DLINK is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_FARADAY is not set
CONFIG_NET_VENDOR_FREESCALE=y
# CONFIG_FEC is not set
# CONFIG_FSL_FMAN is not set
CONFIG_FSL_PQ_MDIO=m
CONFIG_FSL_XGMAC_MDIO=y
CONFIG_GIANFAR=m
# CONFIG_FSL_DPAA2_SWITCH is not set
CONFIG_FSL_ENETC=m
CONFIG_FSL_ENETC_VF=y
CONFIG_FSL_ENETC_IERB=m
CONFIG_FSL_ENETC_MDIO=y
CONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_FUN_ETH is not set
# CONFIG_NET_VENDOR_GOOGLE is not set
CONFIG_NET_VENDOR_HISILICON=y
# CONFIG_HIX5HD2_GMAC is not set
CONFIG_HISI_FEMAC=m
CONFIG_HIP04_ETH=m
# CONFIG_HI13X1_GMAC is not set
CONFIG_HNS_MDIO=y
CONFIG_HNS=y
CONFIG_HNS_DSAF=y
CONFIG_HNS_ENET=y
# CONFIG_HNS3 is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=y
CONFIG_E1000E=m
# CONFIG_IGB is not set
CONFIG_IGBVF=y
CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_IPSEC=y
CONFIG_IXGBEVF=m
CONFIG_IXGBEVF_IPSEC=y
# CONFIG_I40E is not set
CONFIG_IAVF=y
CONFIG_I40EVF=y
CONFIG_ICE=m
CONFIG_ICE_SWITCHDEV=y
CONFIG_FM10K=m
CONFIG_IGC=m
CONFIG_NET_VENDOR_WANGXUN=y
# CONFIG_TXGBE is not set
CONFIG_JME=m
# CONFIG_KORINA is not set
CONFIG_NET_VENDOR_LITEX=y
# CONFIG_LITEX_LITEETH is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MEDIATEK is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
# CONFIG_MLX4_CORE_GEN2 is not set
# CONFIG_MLX5_CORE is not set
CONFIG_MLXSW_CORE=m
# CONFIG_MLXSW_CORE_HWMON is not set
# CONFIG_MLXSW_CORE_THERMAL is not set
CONFIG_MLXSW_PCI=m
# CONFIG_MLXSW_I2C is not set
# CONFIG_MLXSW_SPECTRUM is not set
CONFIG_MLXFW=y
# CONFIG_MLXBF_GIGE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851 is not set
CONFIG_KS8851_MLL=m
CONFIG_KSZ884X_PCI=y
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
CONFIG_LAN743X=m
# CONFIG_LAN966X_SWITCH is not set
# CONFIG_SPARX5_SWITCH is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_MSCC_OCELOT_SWITCH_LIB=m
CONFIG_MSCC_OCELOT_SWITCH=m
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
CONFIG_FEALNX=y
# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=y
CONFIG_LPC_ENET=y
# CONFIG_NET_VENDOR_OKI is not set
CONFIG_ETHOC=m
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=y
CONFIG_QLCNIC=m
CONFIG_QLCNIC_HWMON=y
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=y
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_SH_ETH=m
CONFIG_RAVB=m
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
CONFIG_SXGBE_ETH=m
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SMSC is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_SNI_AVE=m
# CONFIG_SNI_NETSEC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
CONFIG_NET_VENDOR_SUNPLUS=y
# CONFIG_SP7021_EMAC is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
CONFIG_NET_VENDOR_VERTEXCOM=y
# CONFIG_MSE102X is not set
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
CONFIG_WIZNET_W5300=m
CONFIG_WIZNET_BUS_DIRECT=y
# CONFIG_WIZNET_BUS_INDIRECT is not set
# CONFIG_WIZNET_BUS_ANY is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
CONFIG_XILINX_AXI_EMAC=m
CONFIG_XILINX_LL_TEMAC=m
CONFIG_FDDI=y
CONFIG_DEFXX=y
# CONFIG_SKFP is not set
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=y
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_PHYLINK=y
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set
CONFIG_FIXED_PHY=y
CONFIG_SFP=m
#
# MII PHY device drivers
#
CONFIG_AMD_PHY=y
# CONFIG_MESON_GXL_PHY is not set
# CONFIG_ADIN_PHY is not set
# CONFIG_ADIN1100_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
CONFIG_AX88796B_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_BCM54140_PHY=m
CONFIG_BCM63XX_PHY=y
CONFIG_BCM7XXX_PHY=y
CONFIG_BCM84881_PHY=y
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_CYGNUS_PHY=y
CONFIG_BCM_NET_PHYLIB=y
CONFIG_BCM_NET_PHYPTP=m
CONFIG_CICADA_PHY=m
CONFIG_CORTINA_PHY=m
CONFIG_DAVICOM_PHY=y
CONFIG_ICPLUS_PHY=y
# CONFIG_LXT_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_MARVELL_10G_PHY=m
# CONFIG_MARVELL_88X2222_PHY is not set
# CONFIG_MAXLINEAR_GPHY is not set
CONFIG_MEDIATEK_GE_PHY=m
CONFIG_MICREL_PHY=m
CONFIG_MICROCHIP_PHY=m
# CONFIG_MICROCHIP_T1_PHY is not set
CONFIG_MICROSEMI_PHY=m
# CONFIG_MOTORCOMM_PHY is not set
CONFIG_NATIONAL_PHY=m
# CONFIG_NXP_C45_TJA11XX_PHY is not set
CONFIG_NXP_TJA11XX_PHY=m
CONFIG_AT803X_PHY=m
# CONFIG_QSEMI_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
CONFIG_ROCKCHIP_PHY=y
# CONFIG_SMSC_PHY is not set
CONFIG_STE10XP=m
# CONFIG_TERANETICS_PHY is not set
CONFIG_DP83822_PHY=m
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
CONFIG_DP83867_PHY=y
CONFIG_DP83869_PHY=m
# CONFIG_DP83TD510_PHY is not set
CONFIG_VITESSE_PHY=m
# CONFIG_XILINX_GMII2RGMII is not set
CONFIG_MICREL_KS8995MA=m
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_OF_MDIO=y
CONFIG_MDIO_DEVRES=y
CONFIG_MDIO_SUN4I=y
# CONFIG_MDIO_XGENE is not set
# CONFIG_MDIO_ASPEED is not set
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BCM_IPROC=y
CONFIG_MDIO_BCM_UNIMAC=m
CONFIG_MDIO_GPIO=m
CONFIG_MDIO_HISI_FEMAC=y
CONFIG_MDIO_I2C=m
CONFIG_MDIO_MSCC_MIIM=y
CONFIG_MDIO_MOXART=m
# CONFIG_MDIO_OCTEON is not set
CONFIG_MDIO_IPQ4019=m
CONFIG_MDIO_IPQ8064=y
# CONFIG_MDIO_THUNDER is not set
#
# MDIO Multiplexers
#
CONFIG_MDIO_BUS_MUX=y
# CONFIG_MDIO_BUS_MUX_MESON_G12A is not set
# CONFIG_MDIO_BUS_MUX_BCM6368 is not set
CONFIG_MDIO_BUS_MUX_BCM_IPROC=y
CONFIG_MDIO_BUS_MUX_GPIO=y
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
CONFIG_MDIO_BUS_MUX_MMIOREG=y
#
# PCS device drivers
#
CONFIG_PCS_LYNX=m
# CONFIG_PCS_RZN1_MIIC is not set
# end of PCS device drivers
CONFIG_PPP=y
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPPOE=m
# CONFIG_PPTP is not set
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_SLIP=y
CONFIG_SLHC=y
# CONFIG_SLIP_COMPRESSED is not set
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
# CONFIG_WLAN_VENDOR_ADMTEK is not set
# CONFIG_WLAN_VENDOR_ATH is not set
# CONFIG_WLAN_VENDOR_ATMEL is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_PROTO_MSGBUF=y
CONFIG_BRCMFMAC_PCIE=y
# CONFIG_BRCM_TRACING is not set
# CONFIG_BRCMDBG is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_WLAN_VENDOR_INTEL is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
# CONFIG_HOSTAP_PLX is not set
# CONFIG_HOSTAP_PCI is not set
CONFIG_HERMES=m
CONFIG_HERMES_PRISM=y
# CONFIG_HERMES_CACHE_FW_ON_INIT is not set
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
# CONFIG_PCI_HERMES is not set
# CONFIG_P54_COMMON is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
CONFIG_LIBERTAS_THINFIRM=m
CONFIG_LIBERTAS_THINFIRM_DEBUG=y
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_PCIE=m
CONFIG_MWL8K=m
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT76_CORE=m
CONFIG_MT76_LEDS=y
CONFIG_MT76x02_LIB=m
CONFIG_MT76_CONNAC_LIB=m
# CONFIG_MT76x0E is not set
CONFIG_MT76x2_COMMON=m
CONFIG_MT76x2E=m
CONFIG_MT7603E=m
CONFIG_MT7615_COMMON=m
CONFIG_MT7615E=m
# CONFIG_MT7622_WMAC is not set
CONFIG_MT7915E=m
# CONFIG_MT7986_WMAC is not set
# CONFIG_MT7921E is not set
# CONFIG_WLAN_VENDOR_MICROCHIP is not set
CONFIG_WLAN_VENDOR_PURELIFI=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
# CONFIG_RT2500PCI is not set
# CONFIG_RT61PCI is not set
# CONFIG_RT2800PCI is not set
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_LIB_DEBUGFS is not set
# CONFIG_RT2X00_DEBUG is not set
# CONFIG_WLAN_VENDOR_REALTEK is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_SILABS=y
# CONFIG_WFX is not set
CONFIG_WLAN_VENDOR_ST=y
CONFIG_CW1200=m
# CONFIG_CW1200_WLAN_SPI is not set
# CONFIG_WLAN_VENDOR_TI is not set
# CONFIG_WLAN_VENDOR_ZYDAS is not set
# CONFIG_WLAN_VENDOR_QUANTENNA is not set
CONFIG_MAC80211_HWSIM=m
CONFIG_VIRT_WIFI=m
CONFIG_WAN=y
# CONFIG_HDLC is not set
# CONFIG_SLIC_DS26522 is not set
CONFIG_LAPBETHER=m
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
CONFIG_IEEE802154_AT86RF230=m
CONFIG_IEEE802154_MRF24J40=m
CONFIG_IEEE802154_CC2520=m
# CONFIG_IEEE802154_ADF7242 is not set
CONFIG_IEEE802154_CA8210=m
# CONFIG_IEEE802154_CA8210_DEBUGFS is not set
CONFIG_IEEE802154_MCR20A=m
# CONFIG_IEEE802154_HWSIM is not set
#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN
CONFIG_VMXNET3=m
CONFIG_USB4_NET=y
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=y
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
CONFIG_INPUT_VIVALDIFMAP=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_QT1050=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
CONFIG_KEYBOARD_CLPS711X=m
CONFIG_KEYBOARD_DLINK_DIR685=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_EP93XX=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_GPIO_POLLED is not set
CONFIG_KEYBOARD_TCA6416=m
CONFIG_KEYBOARD_TCA8418=m
# CONFIG_KEYBOARD_MATRIX is not set
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_LM8333=y
CONFIG_KEYBOARD_MAX7359=m
CONFIG_KEYBOARD_MCS=y
CONFIG_KEYBOARD_MPR121=m
CONFIG_KEYBOARD_SNVS_PWRKEY=m
# CONFIG_KEYBOARD_IMX is not set
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
CONFIG_KEYBOARD_PMIC8XXX=y
CONFIG_KEYBOARD_SAMSUNG=m
CONFIG_KEYBOARD_GOLDFISH_EVENTS=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_ST_KEYSCAN=m
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_SH_KEYSC=y
# CONFIG_KEYBOARD_STMPE is not set
CONFIG_KEYBOARD_OMAP4=m
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
CONFIG_KEYBOARD_TWL4030=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_CAP11XX=y
CONFIG_KEYBOARD_BCM=m
# CONFIG_KEYBOARD_MT6779 is not set
CONFIG_KEYBOARD_MTK_PMIC=y
# CONFIG_KEYBOARD_CYPRESS_SF is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADC=y
# CONFIG_JOYSTICK_ADI is not set
CONFIG_JOYSTICK_COBRA=m
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
# CONFIG_JOYSTICK_INTERACT is not set
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=y
# CONFIG_JOYSTICK_IFORCE is not set
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=y
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_PSXPAD_SPI=m
# CONFIG_JOYSTICK_PSXPAD_SPI_FF is not set
# CONFIG_JOYSTICK_QWIIC is not set
CONFIG_JOYSTICK_FSIA6B=y
# CONFIG_JOYSTICK_SENSEHAT is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_AD7877=y
CONFIG_TOUCHSCREEN_AD7879=m
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
CONFIG_TOUCHSCREEN_AD7879_SPI=m
CONFIG_TOUCHSCREEN_ADC=y
CONFIG_TOUCHSCREEN_AR1021_I2C=m
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
CONFIG_TOUCHSCREEN_AUO_PIXCIR=y
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_TOUCHSCREEN_BU21029=y
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=m
CONFIG_TOUCHSCREEN_CY8CTMA140=m
CONFIG_TOUCHSCREEN_CY8CTMG110=y
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DA9034 is not set
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
# CONFIG_TOUCHSCREEN_EGALAX is not set
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
CONFIG_TOUCHSCREEN_EXC3000=y
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GOODIX=y
CONFIG_TOUCHSCREEN_HIDEEP=m
# CONFIG_TOUCHSCREEN_HYCON_HY46XX is not set
CONFIG_TOUCHSCREEN_ILI210X=y
# CONFIG_TOUCHSCREEN_ILITEK is not set
CONFIG_TOUCHSCREEN_IPROC=y
# CONFIG_TOUCHSCREEN_S6SY761 is not set
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_EKTF2127=m
CONFIG_TOUCHSCREEN_ELAN=m
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_WACOM_W8001=m
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
CONFIG_TOUCHSCREEN_MAX11801=m
# CONFIG_TOUCHSCREEN_MCS5000 is not set
CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_TOUCHSCREEN_MELFAS_MIP4=y
# CONFIG_TOUCHSCREEN_MSG2638 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_IMAGIS is not set
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=m
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
# CONFIG_TOUCHSCREEN_RASPBERRYPI_FW is not set
# CONFIG_TOUCHSCREEN_MIGOR is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
CONFIG_TOUCHSCREEN_TOUCHWIN=m
# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set
CONFIG_TOUCHSCREEN_PIXCIR=m
CONFIG_TOUCHSCREEN_WDT87XX_I2C=y
CONFIG_TOUCHSCREEN_WM831X=m
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TS4800=m
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
CONFIG_TOUCHSCREEN_TSC2004=y
# CONFIG_TOUCHSCREEN_TSC2005 is not set
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
CONFIG_TOUCHSCREEN_ST1232=m
# CONFIG_TOUCHSCREEN_STMFTS is not set
CONFIG_TOUCHSCREEN_STMPE=m
# CONFIG_TOUCHSCREEN_SUN4I is not set
CONFIG_TOUCHSCREEN_SURFACE3_SPI=m
CONFIG_TOUCHSCREEN_SX8654=m
CONFIG_TOUCHSCREEN_TPS6507X=m
# CONFIG_TOUCHSCREEN_ZET6223 is not set
CONFIG_TOUCHSCREEN_ZFORCE=y
CONFIG_TOUCHSCREEN_ROHM_BU21023=m
CONFIG_TOUCHSCREEN_IQS5XX=y
CONFIG_TOUCHSCREEN_ZINITIX=m
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
# CONFIG_SERIO_SUN4I_PS2 is not set
CONFIG_SERIO_GPIO_PS2=m
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_FM801 is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_LDISC_AUTOLOAD is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set
# CONFIG_SERIAL_EARLYCON_RISCV_SBI is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
# CONFIG_SERIAL_MESON is not set
# CONFIG_SERIAL_CLPS711X is not set
CONFIG_SERIAL_SAMSUNG=m
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
# CONFIG_SERIAL_SAMSUNG_CONSOLE is not set
# CONFIG_SERIAL_TEGRA is not set
CONFIG_SERIAL_MAX3100=y
CONFIG_SERIAL_MAX310X=y
# CONFIG_SERIAL_IMX is not set
CONFIG_SERIAL_IMX_EARLYCON=y
# CONFIG_SERIAL_UARTLITE is not set
# CONFIG_SERIAL_SH_SCI is not set
# CONFIG_SERIAL_HS_LPC32XX is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_ICOM is not set
CONFIG_SERIAL_JSM=y
# CONFIG_SERIAL_MSM is not set
CONFIG_SERIAL_QCOM_GENI=m
CONFIG_SERIAL_QCOM_GENI_CONSOLE=y
# CONFIG_SERIAL_VT8500 is not set
# CONFIG_SERIAL_OMAP is not set
CONFIG_SERIAL_SIFIVE=y
CONFIG_SERIAL_SIFIVE_CONSOLE=y
# CONFIG_SERIAL_LANTIQ is not set
CONFIG_SERIAL_QE=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_SERIAL_BCM63XX=m
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_MXS_AUART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_MPS2_UART_CONSOLE is not set
CONFIG_SERIAL_MPS2_UART=y
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set
CONFIG_SERIAL_FSL_LINFLEXUART=y
# CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
CONFIG_SERIAL_ST_ASC=m
CONFIG_SERIAL_SPRD=m
# CONFIG_SERIAL_STM32 is not set
CONFIG_SERIAL_MVEBU_UART=y
CONFIG_SERIAL_MVEBU_CONSOLE=y
CONFIG_SERIAL_OWL=y
CONFIG_SERIAL_OWL_CONSOLE=y
CONFIG_SERIAL_RDA=y
# CONFIG_SERIAL_RDA_CONSOLE is not set
# CONFIG_SERIAL_MILBEAUT_USIO is not set
# CONFIG_SERIAL_LITEUART is not set
# CONFIG_SERIAL_SUNPLUS is not set
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_MOXA_INTELLIO=y
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK_GT is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=y
# CONFIG_NOZOMI is not set
CONFIG_NULL_TTY=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_RISCV_SBI=y
# CONFIG_RPMSG_TTY is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_IPMI_KCS_BMC=y
CONFIG_ASPEED_KCS_IPMI_BMC=y
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
# CONFIG_IPMI_KCS_BMC_CDEV_IPMI is not set
# CONFIG_IPMI_KCS_BMC_SERIO is not set
CONFIG_ASPEED_BT_IPMI_BMC=m
# CONFIG_IPMB_DEVICE_INTERFACE is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_ATMEL=y
CONFIG_HW_RANDOM_BA431=m
CONFIG_HW_RANDOM_BCM2835=y
CONFIG_HW_RANDOM_IPROC_RNG200=y
CONFIG_HW_RANDOM_IXP4XX=y
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HW_RANDOM_OMAP3_ROM=y
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_HW_RANDOM_IMX_RNGC=m
CONFIG_HW_RANDOM_NOMADIK=y
# CONFIG_HW_RANDOM_STM32 is not set
CONFIG_HW_RANDOM_MESON=m
CONFIG_HW_RANDOM_MTK=m
CONFIG_HW_RANDOM_EXYNOS=y
CONFIG_HW_RANDOM_NPCM=m
# CONFIG_HW_RANDOM_KEYSTONE is not set
CONFIG_HW_RANDOM_CCTRNG=y
CONFIG_HW_RANDOM_XIPHERA=m
CONFIG_HW_RANDOM_CN10K=y
# CONFIG_APPLICOM is not set
CONFIG_DEVMEM=y
# CONFIG_DEVPORT is not set
CONFIG_TCG_TPM=y
# CONFIG_HW_RANDOM_TPM is not set
# CONFIG_TCG_TIS is not set
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C is not set
# CONFIG_TCG_TIS_SYNQUACER is not set
# CONFIG_TCG_TIS_I2C_CR50 is not set
# CONFIG_TCG_TIS_I2C_ATMEL is not set
CONFIG_TCG_TIS_I2C_INFINEON=y
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
CONFIG_TCG_ATMEL=y
CONFIG_TCG_VTPM_PROXY=y
CONFIG_TCG_TIS_ST33ZP24=y
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
CONFIG_TCG_TIS_ST33ZP24_SPI=y
CONFIG_XILLYBUS_CLASS=m
CONFIG_XILLYBUS=m
CONFIG_XILLYBUS_PCIE=m
# CONFIG_XILLYBUS_OF is not set
CONFIG_RANDOM_TRUST_CPU=y
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_GPMUX is not set
# CONFIG_I2C_MUX_LTC4306 is not set
CONFIG_I2C_MUX_PCA9541=m
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_MUX_PINCTRL=m
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_DEMUX_PINCTRL=m
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=m
# CONFIG_I2C_ALI1535 is not set
CONFIG_I2C_ALI1563=m
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_HIX5HD2=m
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_NVIDIA_GPU is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=y
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_ALTERA=y
CONFIG_I2C_ASPEED=y
# CONFIG_I2C_AT91 is not set
CONFIG_I2C_AXXIA=y
CONFIG_I2C_BCM2835=m
CONFIG_I2C_BCM_IPROC=y
CONFIG_I2C_BCM_KONA=m
CONFIG_I2C_BRCMSTB=m
# CONFIG_I2C_CADENCE is not set
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DAVINCI=m
CONFIG_I2C_DESIGNWARE_CORE=m
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_DESIGNWARE_PCI=m
CONFIG_I2C_DIGICOLOR=y
CONFIG_I2C_EG20T=m
CONFIG_I2C_EMEV2=y
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_GPIO=m
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
CONFIG_I2C_HIGHLANDER=y
# CONFIG_I2C_HISI is not set
# CONFIG_I2C_IMG is not set
# CONFIG_I2C_IMX is not set
CONFIG_I2C_IMX_LPI2C=y
# CONFIG_I2C_IOP3XX is not set
CONFIG_I2C_JZ4780=m
CONFIG_I2C_KEMPLD=m
# CONFIG_I2C_LPC2K is not set
# CONFIG_I2C_MESON is not set
# CONFIG_I2C_MICROCHIP_CORE is not set
# CONFIG_I2C_MT65XX is not set
# CONFIG_I2C_MT7621 is not set
# CONFIG_I2C_MV64XXX is not set
# CONFIG_I2C_MXS is not set
# CONFIG_I2C_NPCM is not set
CONFIG_I2C_OCORES=y
CONFIG_I2C_OMAP=m
CONFIG_I2C_OWL=m
# CONFIG_I2C_APPLE is not set
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PNX is not set
CONFIG_I2C_PXA=m
CONFIG_I2C_PXA_SLAVE=y
CONFIG_I2C_QCOM_CCI=y
# CONFIG_I2C_QCOM_GENI is not set
# CONFIG_I2C_QUP is not set
# CONFIG_I2C_RIIC is not set
CONFIG_I2C_RK3X=y
# CONFIG_I2C_RZV2M is not set
CONFIG_I2C_S3C2410=m
# CONFIG_I2C_SH_MOBILE is not set
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_SPRD=y
CONFIG_I2C_ST=y
# CONFIG_I2C_STM32F4 is not set
CONFIG_I2C_STM32F7=y
CONFIG_I2C_SUN6I_P2WI=y
CONFIG_I2C_SYNQUACER=m
CONFIG_I2C_TEGRA=y
CONFIG_I2C_TEGRA_BPMP=m
CONFIG_I2C_UNIPHIER=y
CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_VERSATILE=m
CONFIG_I2C_WMT=y
# CONFIG_I2C_THUNDERX is not set
CONFIG_I2C_XILINX=m
CONFIG_I2C_XLP9XX=m
CONFIG_I2C_RCAR=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_TAOS_EVM=m
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# CONFIG_I2C_FSI is not set
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support
# CONFIG_I2C_STUB is not set
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=m
CONFIG_I2C_SLAVE_TESTUNIT=m
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# end of I2C support
# CONFIG_I3C is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_ALTERA_CORE is not set
CONFIG_SPI_AR934X=m
CONFIG_SPI_ATH79=y
CONFIG_SPI_ARMADA_3700=y
# CONFIG_SPI_ASPEED_SMC is not set
CONFIG_SPI_ATMEL=m
# CONFIG_SPI_AT91_USART is not set
CONFIG_SPI_ATMEL_QUADSPI=m
CONFIG_SPI_AXI_SPI_ENGINE=m
# CONFIG_SPI_BCM2835 is not set
CONFIG_SPI_BCM2835AUX=m
CONFIG_SPI_BCM63XX=y
CONFIG_SPI_BCM63XX_HSSPI=y
# CONFIG_SPI_BCM_QSPI is not set
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_CADENCE_QUADSPI is not set
CONFIG_SPI_CLPS711X=m
# CONFIG_SPI_DESIGNWARE is not set
CONFIG_SPI_EP93XX=y
# CONFIG_SPI_FSI is not set
# CONFIG_SPI_FSL_LPSPI is not set
CONFIG_SPI_FSL_QUADSPI=m
# CONFIG_SPI_GXP is not set
# CONFIG_SPI_HISI_KUNPENG is not set
# CONFIG_SPI_HISI_SFC_V3XX is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
CONFIG_SPI_GPIO=m
CONFIG_SPI_IMG_SPFI=m
# CONFIG_SPI_IMX is not set
# CONFIG_SPI_INGENIC is not set
# CONFIG_SPI_JCORE is not set
CONFIG_SPI_LP8841_RTC=y
CONFIG_SPI_FSL_LIB=m
CONFIG_SPI_FSL_SPI=m
CONFIG_SPI_FSL_DSPI=m
# CONFIG_SPI_MESON_SPICC is not set
CONFIG_SPI_MESON_SPIFC=y
# CONFIG_SPI_MICROCHIP_CORE is not set
# CONFIG_SPI_MT65XX is not set
# CONFIG_SPI_MT7621 is not set
CONFIG_SPI_MTK_NOR=m
# CONFIG_SPI_NPCM_FIU is not set
CONFIG_SPI_NPCM_PSPI=y
CONFIG_SPI_LANTIQ_SSC=y
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_OMAP24XX=y
CONFIG_SPI_TI_QSPI=y
# CONFIG_SPI_OMAP_100K is not set
CONFIG_SPI_ORION=m
CONFIG_SPI_PIC32=y
# CONFIG_SPI_PIC32_SQI is not set
# CONFIG_SPI_PXA2XX is not set
CONFIG_SPI_ROCKCHIP=m
# CONFIG_SPI_ROCKCHIP_SFC is not set
CONFIG_SPI_RPCIF=m
# CONFIG_SPI_RSPI is not set
CONFIG_SPI_QUP=y
CONFIG_SPI_QCOM_GENI=m
CONFIG_SPI_S3C64XX=m
CONFIG_SPI_SC18IS602=m
# CONFIG_SPI_SH_MSIOF is not set
# CONFIG_SPI_SH is not set
# CONFIG_SPI_SH_HSPI is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_SPRD is not set
CONFIG_SPI_SPRD_ADI=y
# CONFIG_SPI_STM32 is not set
CONFIG_SPI_ST_SSC4=m
CONFIG_SPI_SUN4I=y
# CONFIG_SPI_SUN6I is not set
# CONFIG_SPI_SUNPLUS_SP7021 is not set
CONFIG_SPI_SYNQUACER=y
CONFIG_SPI_MXIC=m
# CONFIG_SPI_TEGRA210_QUAD is not set
# CONFIG_SPI_TEGRA114 is not set
CONFIG_SPI_TEGRA20_SFLASH=y
CONFIG_SPI_TEGRA20_SLINK=m
# CONFIG_SPI_THUNDERX is not set
CONFIG_SPI_TOPCLIFF_PCH=m
CONFIG_SPI_UNIPHIER=y
CONFIG_SPI_XCOMM=m
# CONFIG_SPI_XILINX is not set
CONFIG_SPI_XLP=y
CONFIG_SPI_XTENSA_XTFPGA=m
# CONFIG_SPI_ZYNQ_QSPI is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set
#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_LOOPBACK_TEST=m
CONFIG_SPI_TLE62X0=y
# CONFIG_SPI_SLAVE is not set
CONFIG_SPI_DYNAMIC=y
CONFIG_SPMI=y
# CONFIG_SPMI_HISI3670 is not set
CONFIG_SPMI_MSM_PMIC_ARB=m
# CONFIG_SPMI_MTK_PMIF is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=y
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
CONFIG_NTP_PPS=y
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
CONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m
CONFIG_PTP_1588_CLOCK_OPTIONAL=m
CONFIG_PTP_1588_CLOCK_DTE=m
# CONFIG_PTP_1588_CLOCK_QORIQ is not set
# CONFIG_DP83640_PHY is not set
# CONFIG_PTP_1588_CLOCK_INES is not set
CONFIG_PTP_1588_CLOCK_PCH=m
CONFIG_PTP_1588_CLOCK_IDT82P33=m
CONFIG_PTP_1588_CLOCK_IDTCM=m
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_PINCTRL_AMD=y
# CONFIG_PINCTRL_AT91PIO4 is not set
CONFIG_PINCTRL_AXP209=m
CONFIG_PINCTRL_BM1880=y
CONFIG_PINCTRL_DA850_PUPD=y
# CONFIG_PINCTRL_DA9062 is not set
CONFIG_PINCTRL_EQUILIBRIUM=m
CONFIG_PINCTRL_INGENIC=y
# CONFIG_PINCTRL_LPC18XX is not set
# CONFIG_PINCTRL_MAX77620 is not set
CONFIG_PINCTRL_MCP23S08_I2C=m
CONFIG_PINCTRL_MCP23S08_SPI=m
CONFIG_PINCTRL_MCP23S08=m
# CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
# CONFIG_PINCTRL_OCELOT is not set
CONFIG_PINCTRL_PALMAS=y
# CONFIG_PINCTRL_PISTACHIO is not set
# CONFIG_PINCTRL_ROCKCHIP is not set
CONFIG_PINCTRL_SINGLE=m
# CONFIG_PINCTRL_STARFIVE is not set
CONFIG_PINCTRL_STMFX=y
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_OWL=y
CONFIG_PINCTRL_S500=y
# CONFIG_PINCTRL_S700 is not set
# CONFIG_PINCTRL_S900 is not set
CONFIG_PINCTRL_ASPEED=y
# CONFIG_PINCTRL_ASPEED_G4 is not set
CONFIG_PINCTRL_ASPEED_G5=y
# CONFIG_PINCTRL_ASPEED_G6 is not set
CONFIG_PINCTRL_BCM281XX=y
CONFIG_PINCTRL_BCM2835=y
# CONFIG_PINCTRL_BCM4908 is not set
# CONFIG_PINCTRL_BCM6318 is not set
# CONFIG_PINCTRL_BCM6328 is not set
# CONFIG_PINCTRL_BCM6358 is not set
# CONFIG_PINCTRL_BCM6362 is not set
# CONFIG_PINCTRL_BCM6368 is not set
# CONFIG_PINCTRL_BCM63268 is not set
CONFIG_PINCTRL_IPROC_GPIO=y
CONFIG_PINCTRL_CYGNUS_MUX=y
# CONFIG_PINCTRL_NS is not set
# CONFIG_PINCTRL_NSP_GPIO is not set
CONFIG_PINCTRL_NS2_MUX=y
# CONFIG_PINCTRL_NSP_MUX is not set
CONFIG_PINCTRL_BERLIN=y
CONFIG_PINCTRL_AS370=y
CONFIG_PINCTRL_BERLIN_BG4CT=y
#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers
#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
CONFIG_PINCTRL_MTK_V2=y
CONFIG_PINCTRL_MTK_MOORE=y
CONFIG_PINCTRL_MTK_PARIS=y
CONFIG_PINCTRL_MT2701=y
CONFIG_PINCTRL_MT7623=y
CONFIG_PINCTRL_MT7629=y
# CONFIG_PINCTRL_MT8135 is not set
CONFIG_PINCTRL_MT8127=y
# CONFIG_PINCTRL_MT2712 is not set
CONFIG_PINCTRL_MT6765=m
CONFIG_PINCTRL_MT6779=y
# CONFIG_PINCTRL_MT6795 is not set
# CONFIG_PINCTRL_MT6797 is not set
# CONFIG_PINCTRL_MT7622 is not set
# CONFIG_PINCTRL_MT7986 is not set
CONFIG_PINCTRL_MT8167=y
# CONFIG_PINCTRL_MT8173 is not set
CONFIG_PINCTRL_MT8183=y
# CONFIG_PINCTRL_MT8186 is not set
CONFIG_PINCTRL_MT8192=y
# CONFIG_PINCTRL_MT8195 is not set
# CONFIG_PINCTRL_MT8365 is not set
# CONFIG_PINCTRL_MT8516 is not set
CONFIG_PINCTRL_MT6397=y
# end of MediaTek pinctrl drivers
CONFIG_PINCTRL_MESON=y
# CONFIG_PINCTRL_WPCM450 is not set
CONFIG_PINCTRL_NPCM7XX=y
CONFIG_PINCTRL_PXA=y
CONFIG_PINCTRL_PXA25X=y
CONFIG_PINCTRL_PXA27X=m
CONFIG_PINCTRL_MSM=y
CONFIG_PINCTRL_APQ8064=y
CONFIG_PINCTRL_APQ8084=m
# CONFIG_PINCTRL_IPQ4019 is not set
CONFIG_PINCTRL_IPQ8064=m
CONFIG_PINCTRL_IPQ8074=m
CONFIG_PINCTRL_IPQ6018=m
CONFIG_PINCTRL_MSM8226=m
CONFIG_PINCTRL_MSM8660=m
# CONFIG_PINCTRL_MSM8960 is not set
# CONFIG_PINCTRL_MDM9607 is not set
CONFIG_PINCTRL_MDM9615=y
CONFIG_PINCTRL_MSM8X74=m
# CONFIG_PINCTRL_MSM8909 is not set
# CONFIG_PINCTRL_MSM8916 is not set
# CONFIG_PINCTRL_MSM8953 is not set
CONFIG_PINCTRL_MSM8976=y
CONFIG_PINCTRL_MSM8994=y
CONFIG_PINCTRL_MSM8996=m
# CONFIG_PINCTRL_MSM8998 is not set
# CONFIG_PINCTRL_QCM2290 is not set
# CONFIG_PINCTRL_QCS404 is not set
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
CONFIG_PINCTRL_SC7180=y
# CONFIG_PINCTRL_SC7280 is not set
# CONFIG_PINCTRL_SC8180X is not set
# CONFIG_PINCTRL_SC8280XP is not set
# CONFIG_PINCTRL_SDM660 is not set
CONFIG_PINCTRL_SDM845=m
# CONFIG_PINCTRL_SDX55 is not set
# CONFIG_PINCTRL_SM6115 is not set
# CONFIG_PINCTRL_SM6125 is not set
# CONFIG_PINCTRL_SM6350 is not set
# CONFIG_PINCTRL_SM6375 is not set
# CONFIG_PINCTRL_SDX65 is not set
# CONFIG_PINCTRL_SM8150 is not set
# CONFIG_PINCTRL_SM8250 is not set
# CONFIG_PINCTRL_SM8350 is not set
# CONFIG_PINCTRL_SM8450 is not set
# CONFIG_PINCTRL_LPASS_LPI is not set
#
# Renesas pinctrl drivers
#
CONFIG_PINCTRL_RENESAS=y
CONFIG_PINCTRL_SH_PFC=y
CONFIG_PINCTRL_SH_PFC_GPIO=y
CONFIG_PINCTRL_SH_FUNC_GPIO=y
CONFIG_PINCTRL_PFC_EMEV2=y
# CONFIG_PINCTRL_PFC_R8A77995 is not set
CONFIG_PINCTRL_PFC_R8A7794=y
CONFIG_PINCTRL_PFC_R8A77990=y
CONFIG_PINCTRL_PFC_R8A7779=y
# CONFIG_PINCTRL_PFC_R8A7790 is not set
CONFIG_PINCTRL_PFC_R8A77950=y
CONFIG_PINCTRL_PFC_R8A77951=y
CONFIG_PINCTRL_PFC_R8A7778=y
# CONFIG_PINCTRL_PFC_R8A7793 is not set
# CONFIG_PINCTRL_PFC_R8A7791 is not set
CONFIG_PINCTRL_PFC_R8A77965=y
CONFIG_PINCTRL_PFC_R8A77960=y
# CONFIG_PINCTRL_PFC_R8A77961 is not set
# CONFIG_PINCTRL_PFC_R8A779F0 is not set
CONFIG_PINCTRL_PFC_R8A7792=y
CONFIG_PINCTRL_PFC_R8A77980=y
CONFIG_PINCTRL_PFC_R8A77970=y
# CONFIG_PINCTRL_PFC_R8A779A0 is not set
# CONFIG_PINCTRL_PFC_R8A779G0 is not set
CONFIG_PINCTRL_PFC_R8A7740=y
# CONFIG_PINCTRL_PFC_R8A73A4 is not set
# CONFIG_PINCTRL_RZA1 is not set
# CONFIG_PINCTRL_RZA2 is not set
# CONFIG_PINCTRL_RZG2L is not set
CONFIG_PINCTRL_PFC_R8A77470=y
# CONFIG_PINCTRL_PFC_R8A7745 is not set
CONFIG_PINCTRL_PFC_R8A7742=y
# CONFIG_PINCTRL_PFC_R8A7743 is not set
# CONFIG_PINCTRL_PFC_R8A7744 is not set
CONFIG_PINCTRL_PFC_R8A774C0=y
# CONFIG_PINCTRL_PFC_R8A774E1 is not set
# CONFIG_PINCTRL_PFC_R8A774A1 is not set
CONFIG_PINCTRL_PFC_R8A774B1=y
CONFIG_PINCTRL_RZN1=y
# CONFIG_PINCTRL_RZV2M is not set
# CONFIG_PINCTRL_PFC_SH7203 is not set
# CONFIG_PINCTRL_PFC_SH7264 is not set
# CONFIG_PINCTRL_PFC_SH7269 is not set
# CONFIG_PINCTRL_PFC_SH7720 is not set
# CONFIG_PINCTRL_PFC_SH7722 is not set
# CONFIG_PINCTRL_PFC_SH7734 is not set
# CONFIG_PINCTRL_PFC_SH7757 is not set
# CONFIG_PINCTRL_PFC_SH7785 is not set
CONFIG_PINCTRL_PFC_SH7786=y
CONFIG_PINCTRL_PFC_SH73A0=y
# CONFIG_PINCTRL_PFC_SH7723 is not set
CONFIG_PINCTRL_PFC_SH7724=y
# CONFIG_PINCTRL_PFC_SHX3 is not set
# end of Renesas pinctrl drivers
CONFIG_PINCTRL_SAMSUNG=y
CONFIG_PINCTRL_EXYNOS=y
# CONFIG_PINCTRL_EXYNOS_ARM is not set
CONFIG_PINCTRL_EXYNOS_ARM64=y
# CONFIG_PINCTRL_S3C24XX is not set
# CONFIG_PINCTRL_S3C64XX is not set
CONFIG_PINCTRL_SPRD=m
CONFIG_PINCTRL_SPRD_SC9860=m
CONFIG_PINCTRL_STM32=y
# CONFIG_PINCTRL_STM32F429 is not set
# CONFIG_PINCTRL_STM32F469 is not set
CONFIG_PINCTRL_STM32F746=y
CONFIG_PINCTRL_STM32F769=y
# CONFIG_PINCTRL_STM32H743 is not set
# CONFIG_PINCTRL_STM32MP135 is not set
# CONFIG_PINCTRL_STM32MP157 is not set
CONFIG_PINCTRL_TI_IODELAY=m
# CONFIG_PINCTRL_UNIPHIER is not set
CONFIG_PINCTRL_VISCONTI=y
CONFIG_PINCTRL_TMPV7700=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_REGMAP=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
# CONFIG_GPIO_ALTERA is not set
CONFIG_GPIO_ASPEED=y
CONFIG_GPIO_ASPEED_SGPIO=y
# CONFIG_GPIO_ATH79 is not set
CONFIG_GPIO_RASPBERRYPI_EXP=m
CONFIG_GPIO_BCM_KONA=y
CONFIG_GPIO_BCM_XGS_IPROC=m
CONFIG_GPIO_BRCMSTB=y
CONFIG_GPIO_CADENCE=y
# CONFIG_GPIO_CLPS711X is not set
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_EIC_SPRD=m
CONFIG_GPIO_EM=y
# CONFIG_GPIO_FTGPIO010 is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_HISI is not set
CONFIG_GPIO_HLWD=m
# CONFIG_GPIO_IOP is not set
CONFIG_GPIO_LOGICVC=y
CONFIG_GPIO_LPC18XX=m
CONFIG_GPIO_LPC32XX=m
CONFIG_GPIO_MB86S7X=m
CONFIG_GPIO_MPC8XXX=y
# CONFIG_GPIO_MT7621 is not set
CONFIG_GPIO_MXC=m
CONFIG_GPIO_MXS=y
CONFIG_GPIO_PMIC_EIC_SPRD=y
# CONFIG_GPIO_PXA is not set
CONFIG_GPIO_RCAR=y
# CONFIG_GPIO_RDA is not set
# CONFIG_GPIO_ROCKCHIP is not set
# CONFIG_GPIO_SAMA5D2_PIOBU is not set
# CONFIG_GPIO_SIFIVE is not set
CONFIG_GPIO_SIOX=m
CONFIG_GPIO_SNPS_CREG=y
CONFIG_GPIO_SPRD=y
CONFIG_GPIO_STP_XWAY=y
CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_TEGRA=y
CONFIG_GPIO_TEGRA186=y
# CONFIG_GPIO_TS4800 is not set
# CONFIG_GPIO_THUNDERX is not set
CONFIG_GPIO_UNIPHIER=y
# CONFIG_GPIO_VISCONTI is not set
CONFIG_GPIO_VX855=m
CONFIG_GPIO_XGENE_SB=m
CONFIG_GPIO_XILINX=m
CONFIG_GPIO_XLP=y
CONFIG_GPIO_AMD_FCH=m
# CONFIG_GPIO_IDT3243X is not set
# end of Memory mapped GPIO drivers
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
CONFIG_GPIO_GW_PLD=m
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
CONFIG_GPIO_PCA9570=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y
CONFIG_GPIO_TS4900=m
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
# CONFIG_GPIO_ARIZONA is not set
CONFIG_GPIO_DA9052=m
# CONFIG_GPIO_DA9055 is not set
CONFIG_GPIO_KEMPLD=m
CONFIG_GPIO_LP3943=m
CONFIG_GPIO_LP873X=m
# CONFIG_GPIO_LP87565 is not set
CONFIG_GPIO_MAX77620=y
CONFIG_GPIO_MAX77650=m
# CONFIG_GPIO_PALMAS is not set
CONFIG_GPIO_SL28CPLD=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TPS65086=m
CONFIG_GPIO_TPS65218=m
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TQMX86=m
# CONFIG_GPIO_TWL4030 is not set
CONFIG_GPIO_TWL6040=y
CONFIG_GPIO_WM831X=y
# CONFIG_GPIO_WM8350 is not set
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=m
CONFIG_GPIO_BT8XX=m
# CONFIG_GPIO_MLXBF is not set
# CONFIG_GPIO_MLXBF2 is not set
CONFIG_GPIO_ML_IOH=y
CONFIG_GPIO_PCH=m
# CONFIG_GPIO_PCI_IDIO_16 is not set
CONFIG_GPIO_PCIE_IDIO_24=y
CONFIG_GPIO_RDC321X=m
# end of PCI GPIO expanders
#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
CONFIG_GPIO_MAX3191X=m
# CONFIG_GPIO_MAX7301 is not set
CONFIG_GPIO_MC33880=y
CONFIG_GPIO_PISOSR=y
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders
#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=m
CONFIG_GPIO_MOCKUP=m
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers
CONFIG_W1=y
# CONFIG_W1_CON is not set
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_MXC=m
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=m
CONFIG_W1_MASTER_SGI=m
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2405=m
# CONFIG_W1_SLAVE_DS2408 is not set
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=m
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2805=y
CONFIG_W1_SLAVE_DS2430=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
# CONFIG_W1_SLAVE_DS2438 is not set
CONFIG_W1_SLAVE_DS250X=y
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=m
# CONFIG_W1_SLAVE_DS28E17 is not set
# end of 1-wire Slaves
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=y
# CONFIG_IP5XXX_POWER is not set
CONFIG_MAX8925_POWER=m
CONFIG_WM831X_BACKUP=m
CONFIG_WM831X_POWER=y
CONFIG_WM8350_POWER=m
CONFIG_TEST_POWER=y
CONFIG_CHARGER_ADP5061=m
CONFIG_BATTERY_ACT8945A=m
# CONFIG_BATTERY_CW2015 is not set
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=m
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_LEGO_EV3 is not set
# CONFIG_BATTERY_SAMSUNG_SDI is not set
CONFIG_BATTERY_INGENIC=m
CONFIG_BATTERY_SBS=m
CONFIG_CHARGER_SBS=y
CONFIG_MANAGER_SBS=y
CONFIG_BATTERY_BQ27XXX=m
CONFIG_BATTERY_BQ27XXX_I2C=m
CONFIG_BATTERY_BQ27XXX_HDQ=m
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
CONFIG_BATTERY_DA9030=m
CONFIG_BATTERY_DA9052=y
CONFIG_BATTERY_DA9150=m
CONFIG_AXP20X_POWER=m
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
# CONFIG_BATTERY_MAX1721X is not set
# CONFIG_BATTERY_TWL4030_MADC is not set
# CONFIG_CHARGER_PCF50633 is not set
CONFIG_BATTERY_RX51=y
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_TWL4030 is not set
CONFIG_CHARGER_LP8727=y
# CONFIG_CHARGER_LP8788 is not set
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_LT3651=y
# CONFIG_CHARGER_LTC4162L is not set
CONFIG_CHARGER_DETECTOR_MAX14656=m
CONFIG_CHARGER_MAX77650=m
# CONFIG_CHARGER_MAX77976 is not set
CONFIG_CHARGER_MAX8997=y
CONFIG_CHARGER_MAX8998=m
# CONFIG_CHARGER_MP2629 is not set
CONFIG_CHARGER_QCOM_SMBB=m
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
CONFIG_CHARGER_BQ2515X=m
CONFIG_CHARGER_BQ25890=m
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_CHARGER_SMB347 is not set
CONFIG_CHARGER_TPS65090=m
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_GOLDFISH=m
# CONFIG_BATTERY_RT5033 is not set
CONFIG_CHARGER_RT9455=y
CONFIG_CHARGER_SC2731=y
CONFIG_FUEL_GAUGE_SC27XX=y
CONFIG_CHARGER_UCS1002=m
CONFIG_CHARGER_BD99954=m
CONFIG_RN5T618_POWER=m
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_AD7314=m
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM1177 is not set
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7310=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=m
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_AHT10 is not set
CONFIG_SENSORS_AS370=m
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_AXI_FAN_CONTROL=m
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ASPEED=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_BT1_PVT=m
CONFIG_SENSORS_BT1_PVT_ALARMS=y
CONFIG_SENSORS_CORSAIR_CPRO=m
# CONFIG_SENSORS_CORSAIR_PSU is not set
CONFIG_SENSORS_DRIVETEMP=m
CONFIG_SENSORS_DS620=m
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_DA9052_ADC=m
# CONFIG_SENSORS_DA9055 is not set
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_SPARX5=m
CONFIG_SENSORS_F71805F=m
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_GSC=m
# CONFIG_SENSORS_MC13783_ADC is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_FTSTEUTATES is not set
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_HIH6130=m
# CONFIG_SENSORS_IIO_HWMON is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LAN966X is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
CONFIG_SENSORS_LTC2947=m
CONFIG_SENSORS_LTC2947_I2C=m
CONFIG_SENSORS_LTC2947_SPI=m
CONFIG_SENSORS_LTC2990=m
# CONFIG_SENSORS_LTC2992 is not set
CONFIG_SENSORS_LTC4151=m
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX1111=m
# CONFIG_SENSORS_MAX127 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_MAX31722=m
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX6620 is not set
CONFIG_SENSORS_MAX6621=m
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_MLXREG_FAN is not set
CONFIG_SENSORS_TC654=m
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MENF21BMC_HWMON is not set
# CONFIG_SENSORS_MR75203 is not set
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
# CONFIG_SENSORS_LM75 is not set
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT6775_I2C is not set
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NCT7904=m
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NSA320 is not set
CONFIG_SENSORS_OCC_P8_I2C=m
CONFIG_SENSORS_OCC_P9_SBE=m
CONFIG_SENSORS_OCC=m
CONFIG_SENSORS_PCF8591=m
# CONFIG_PMBUS is not set
CONFIG_SENSORS_PWM_FAN=m
CONFIG_SENSORS_RASPBERRYPI_HWMON=m
# CONFIG_SENSORS_SL28CPLD is not set
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SHT3x=m
# CONFIG_SENSORS_SHT4x is not set
CONFIG_SENSORS_SHTC1=m
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_SY7636A is not set
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_STTS751 is not set
CONFIG_SENSORS_SMM665=m
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA238 is not set
CONFIG_SENSORS_INA3221=m
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP103=m
CONFIG_SENSORS_TMP108=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_TMP464 is not set
CONFIG_SENSORS_TMP513=m
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_WM831X is not set
CONFIG_SENSORS_WM8350=m
CONFIG_SENSORS_INTEL_M10_BMC_HWMON=m
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_CPU_THERMAL is not set
CONFIG_DEVFREQ_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_THERMAL_MMIO=m
# CONFIG_HISI_THERMAL is not set
CONFIG_IMX_THERMAL=m
CONFIG_IMX8MM_THERMAL=m
CONFIG_K3_THERMAL=y
# CONFIG_MAX77620_THERMAL is not set
CONFIG_QORIQ_THERMAL=y
CONFIG_SPEAR_THERMAL=m
CONFIG_SUN8I_THERMAL=m
CONFIG_ROCKCHIP_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_RCAR_GEN3_THERMAL=y
# CONFIG_RZG2L_THERMAL is not set
CONFIG_KIRKWOOD_THERMAL=y
CONFIG_DOVE_THERMAL=y
# CONFIG_ARMADA_THERMAL is not set
# CONFIG_DA9062_THERMAL is not set
CONFIG_MTK_THERMAL=y
#
# Intel thermal drivers
#
#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
# end of Intel thermal drivers
#
# Broadcom thermal drivers
#
CONFIG_BCM2711_THERMAL=m
CONFIG_BCM2835_THERMAL=m
CONFIG_BRCMSTB_THERMAL=y
CONFIG_BCM_NS_THERMAL=y
CONFIG_BCM_SR_THERMAL=y
# end of Broadcom thermal drivers
#
# Texas Instruments thermal drivers
#
# CONFIG_TI_SOC_THERMAL is not set
# end of Texas Instruments thermal drivers
#
# Samsung thermal drivers
#
# CONFIG_EXYNOS_THERMAL is not set
# end of Samsung thermal drivers
#
# NVIDIA Tegra thermal drivers
#
# CONFIG_TEGRA_SOCTHERM is not set
# CONFIG_TEGRA_BPMP_THERMAL is not set
# CONFIG_TEGRA30_TSENSOR is not set
# end of NVIDIA Tegra thermal drivers
CONFIG_GENERIC_ADC_THERMAL=y
#
# Qualcomm thermal drivers
#
# CONFIG_QCOM_SPMI_ADC_TM5 is not set
# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
# end of Qualcomm thermal drivers
# CONFIG_UNIPHIER_THERMAL is not set
CONFIG_SPRD_THERMAL=y
CONFIG_KHADAS_MCU_FAN_THERMAL=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
# CONFIG_WATCHDOG_SYSFS is not set
# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set
#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
# CONFIG_DA9052_WATCHDOG is not set
CONFIG_DA9055_WATCHDOG=y
CONFIG_DA9063_WATCHDOG=m
CONFIG_DA9062_WATCHDOG=y
CONFIG_GPIO_WATCHDOG=y
# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set
CONFIG_MENF21BMC_WATCHDOG=y
# CONFIG_WM831X_WATCHDOG is not set
CONFIG_WM8350_WATCHDOG=m
CONFIG_XILINX_WATCHDOG=m
CONFIG_ZIIRAVE_WATCHDOG=m
CONFIG_MLX_WDT=y
CONFIG_SL28CPLD_WATCHDOG=y
CONFIG_ARMADA_37XX_WATCHDOG=m
CONFIG_ASM9260_WATCHDOG=m
CONFIG_AT91RM9200_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=m
CONFIG_SAMA5D4_WATCHDOG=m
# CONFIG_CADENCE_WATCHDOG is not set
CONFIG_FTWDT010_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
CONFIG_EP93XX_WATCHDOG=y
CONFIG_OMAP_WATCHDOG=y
CONFIG_PNX4008_WATCHDOG=m
CONFIG_DAVINCI_WATCHDOG=m
CONFIG_K3_RTI_WATCHDOG=m
# CONFIG_RN5T618_WATCHDOG is not set
CONFIG_SUNXI_WATCHDOG=y
CONFIG_NPCM7XX_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
CONFIG_STMP3XXX_RTC_WATCHDOG=y
CONFIG_TS4800_WATCHDOG=y
CONFIG_TS72XX_WATCHDOG=m
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_MAX77620_WATCHDOG is not set
# CONFIG_IMX2_WDT is not set
# CONFIG_IMX7ULP_WDT is not set
# CONFIG_MOXART_WDT is not set
CONFIG_ST_LPC_WATCHDOG=m
CONFIG_TEGRA_WATCHDOG=m
CONFIG_QCOM_WDT=y
# CONFIG_MESON_GXBB_WATCHDOG is not set
CONFIG_MESON_WATCHDOG=m
# CONFIG_MEDIATEK_WATCHDOG is not set
CONFIG_DIGICOLOR_WATCHDOG=y
# CONFIG_LPC18XX_WATCHDOG is not set
CONFIG_RENESAS_WDT=y
# CONFIG_RENESAS_RZAWDT is not set
# CONFIG_RENESAS_RZN1WDT is not set
# CONFIG_RENESAS_RZG2LWDT is not set
# CONFIG_ASPEED_WATCHDOG is not set
CONFIG_UNIPHIER_WATCHDOG=y
CONFIG_RTD119X_WATCHDOG=y
# CONFIG_REALTEK_OTTO_WDT is not set
CONFIG_SPRD_WATCHDOG=y
# CONFIG_VISCONTI_WATCHDOG is not set
# CONFIG_MSC313E_WATCHDOG is not set
# CONFIG_APPLE_WATCHDOG is not set
# CONFIG_SUNPLUS_WATCHDOG is not set
CONFIG_ALIM7101_WDT=y
CONFIG_SC520_WDT=y
CONFIG_I6300ESB_WDT=m
CONFIG_KEMPLD_WDT=m
CONFIG_RDC321X_WDT=m
# CONFIG_BCM47XX_WDT is not set
CONFIG_BCM2835_WDT=y
CONFIG_BCM_KONA_WDT=m
# CONFIG_BCM_KONA_WDT_DEBUG is not set
CONFIG_BCM7038_WDT=y
CONFIG_IMGPDC_WDT=m
CONFIG_MPC5200_WDT=y
CONFIG_MEN_A21_WDT=y
# CONFIG_UML_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=y
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
# CONFIG_SSB_HOST_SOC is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
# CONFIG_BCMA_DRIVER_MIPS is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_SUN4I_GPADC=m
CONFIG_MFD_AS3711=y
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_AT91_USART=y
# CONFIG_MFD_ATMEL_FLEXCOM is not set
CONFIG_MFD_ATMEL_HLCDC=m
CONFIG_MFD_ATMEL_SMC=y
CONFIG_MFD_BCM590XX=y
# CONFIG_MFD_BD9571MWV is not set
CONFIG_MFD_AXP20X=m
CONFIG_MFD_AXP20X_I2C=m
# CONFIG_MFD_MADERA is not set
CONFIG_MFD_ASIC3=y
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
# CONFIG_MFD_DA9052_I2C is not set
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
# CONFIG_MFD_DA9063 is not set
CONFIG_MFD_DA9150=y
CONFIG_MFD_ENE_KB3930=y
# CONFIG_MFD_EXYNOS_LPASS is not set
CONFIG_MFD_GATEWORKS_GSC=m
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=m
CONFIG_MFD_MP2629=m
# CONFIG_MFD_MXS_LRADC is not set
# CONFIG_MFD_MX25_TSADC is not set
CONFIG_MFD_HI6421_PMIC=m
# CONFIG_MFD_HI6421_SPMI is not set
# CONFIG_MFD_HI655X_PMIC is not set
CONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not set
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=m
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=y
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
CONFIG_MFD_MAX77620=y
CONFIG_MFD_MAX77650=m
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
# CONFIG_MFD_MT6360 is not set
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CPCAP is not set
# CONFIG_MFD_NTXEC is not set
# CONFIG_MFD_RETU is not set
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
CONFIG_MFD_PM8XXX=y
# CONFIG_MFD_SPMI_PMIC is not set
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_RT4831 is not set
CONFIG_MFD_RT5033=m
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
CONFIG_MFD_RN5T618=y
CONFIG_MFD_SEC_CORE=m
CONFIG_MFD_SI476X_CORE=y
# CONFIG_MFD_SIMPLE_MFD_I2C is not set
# CONFIG_MFD_SL28CPLD is not set
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SC27XX_PMIC is not set
CONFIG_ABX500_CORE=y
CONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
CONFIG_STMPE_SPI=y
# end of STMicroelectronics STMPE Interface Drivers
CONFIG_MFD_SUN6I_PRCM=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=m
CONFIG_MFD_LP3943=m
CONFIG_MFD_LP8788=y
CONFIG_MFD_TI_LMU=m
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=m
CONFIG_TPS6507X=m
CONFIG_MFD_TPS65086=m
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_TPS65217 is not set
CONFIG_MFD_TI_LP873X=m
CONFIG_MFD_TI_LP87565=y
CONFIG_MFD_TPS65218=m
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
# CONFIG_MFD_TPS65912_SPI is not set
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=m
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TC3589X is not set
CONFIG_MFD_TQMX86=y
CONFIG_MFD_VX855=m
# CONFIG_MFD_LOCHNAGAR is not set
CONFIG_MFD_ARIZONA=m
# CONFIG_MFD_ARIZONA_I2C is not set
CONFIG_MFD_ARIZONA_SPI=m
# CONFIG_MFD_CS47L24 is not set
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
# CONFIG_MFD_WM831X_SPI is not set
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_WM8994 is not set
CONFIG_MFD_STW481X=m
CONFIG_MFD_ROHM_BD718XX=m
# CONFIG_MFD_ROHM_BD71828 is not set
# CONFIG_MFD_ROHM_BD957XMUF is not set
# CONFIG_MFD_STM32_LPTIMER is not set
# CONFIG_MFD_STM32_TIMERS is not set
# CONFIG_MFD_STPMIC1 is not set
CONFIG_MFD_STMFX=y
# CONFIG_MFD_ATC260X_I2C is not set
CONFIG_MFD_KHADAS_MCU=m
# CONFIG_MFD_ACER_A500_EC is not set
# CONFIG_MFD_QCOM_PM8008 is not set
CONFIG_MFD_INTEL_M10_BMC=m
# CONFIG_MFD_RSMU_I2C is not set
# CONFIG_MFD_RSMU_SPI is not set
# end of Multifunction device drivers
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_88PG86X is not set
CONFIG_REGULATOR_ACT8865=m
# CONFIG_REGULATOR_ACT8945A is not set
CONFIG_REGULATOR_AD5398=y
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AXP20X=m
CONFIG_REGULATOR_BCM590XX=m
CONFIG_REGULATOR_BD718XX=m
# CONFIG_REGULATOR_DA903X is not set
# CONFIG_REGULATOR_DA9052 is not set
CONFIG_REGULATOR_DA9055=m
CONFIG_REGULATOR_DA9062=y
# CONFIG_REGULATOR_DA9121 is not set
CONFIG_REGULATOR_DA9210=m
CONFIG_REGULATOR_DA9211=m
CONFIG_REGULATOR_FAN53555=y
# CONFIG_REGULATOR_FAN53880 is not set
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421=m
# CONFIG_REGULATOR_HI6421V530 is not set
CONFIG_REGULATOR_ISL9305=m
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_LM363X=m
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_LP872X=y
# CONFIG_REGULATOR_LP873X is not set
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LP87565=m
# CONFIG_REGULATOR_LP8788 is not set
CONFIG_REGULATOR_LTC3589=m
# CONFIG_REGULATOR_LTC3676 is not set
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_MAX77620=y
# CONFIG_REGULATOR_MAX77650 is not set
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
# CONFIG_REGULATOR_MAX8893 is not set
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8925=y
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX8998=y
# CONFIG_REGULATOR_MAX20086 is not set
CONFIG_REGULATOR_MAX77686=m
# CONFIG_REGULATOR_MAX77693 is not set
CONFIG_REGULATOR_MAX77802=m
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=m
CONFIG_REGULATOR_MCP16502=m
# CONFIG_REGULATOR_MP5416 is not set
# CONFIG_REGULATOR_MP8859 is not set
CONFIG_REGULATOR_MP886X=m
# CONFIG_REGULATOR_MPQ7920 is not set
CONFIG_REGULATOR_MT6311=m
# CONFIG_REGULATOR_MT6315 is not set
CONFIG_REGULATOR_MT6323=y
CONFIG_REGULATOR_MT6358=y
# CONFIG_REGULATOR_MT6359 is not set
# CONFIG_REGULATOR_MT6397 is not set
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PBIAS=y
CONFIG_REGULATOR_PCA9450=m
# CONFIG_REGULATOR_PCF50633 is not set
# CONFIG_REGULATOR_PF8X00 is not set
# CONFIG_REGULATOR_PFUZE100 is not set
CONFIG_REGULATOR_PV88060=m
CONFIG_REGULATOR_PV88080=m
CONFIG_REGULATOR_PV88090=m
# CONFIG_REGULATOR_PWM is not set
# CONFIG_REGULATOR_QCOM_RPMH is not set
CONFIG_REGULATOR_QCOM_SMD_RPM=m
CONFIG_REGULATOR_QCOM_SPMI=y
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=m
CONFIG_REGULATOR_RN5T618=y
CONFIG_REGULATOR_ROHM=m
CONFIG_REGULATOR_RT4801=y
CONFIG_REGULATOR_RT5033=m
# CONFIG_REGULATOR_RT5190A is not set
# CONFIG_REGULATOR_RT5759 is not set
# CONFIG_REGULATOR_RT6160 is not set
# CONFIG_REGULATOR_RT6245 is not set
# CONFIG_REGULATOR_RTQ2134 is not set
# CONFIG_REGULATOR_RTMV20 is not set
# CONFIG_REGULATOR_RTQ6752 is not set
# CONFIG_REGULATOR_S2MPA01 is not set
CONFIG_REGULATOR_S2MPS11=m
CONFIG_REGULATOR_S5M8767=m
CONFIG_REGULATOR_SC2731=m
# CONFIG_REGULATOR_SLG51000 is not set
# CONFIG_REGULATOR_STM32_BOOSTER is not set
# CONFIG_REGULATOR_STM32_VREFBUF is not set
CONFIG_REGULATOR_STM32_PWR=y
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_STW481X_VMMC is not set
# CONFIG_REGULATOR_SY7636A is not set
CONFIG_REGULATOR_SY8106A=m
# CONFIG_REGULATOR_SY8824X is not set
CONFIG_REGULATOR_SY8827N=m
CONFIG_REGULATOR_TPS51632=y
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS6286X is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65086 is not set
CONFIG_REGULATOR_TPS65090=m
# CONFIG_REGULATOR_TPS65132 is not set
CONFIG_REGULATOR_TPS65218=m
CONFIG_REGULATOR_TPS6524X=y
# CONFIG_REGULATOR_TPS65912 is not set
# CONFIG_REGULATOR_TPS68470 is not set
CONFIG_REGULATOR_TWL4030=y
# CONFIG_REGULATOR_UNIPHIER is not set
# CONFIG_REGULATOR_VCTRL is not set
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8350=m
CONFIG_REGULATOR_QCOM_LABIBB=y
CONFIG_RC_CORE=y
CONFIG_BPF_LIRC_MODE2=y
CONFIG_LIRC=y
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
# CONFIG_IR_IMON_DECODER is not set
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_RCMM_DECODER=y
CONFIG_IR_SANYO_DECODER=m
# CONFIG_IR_SHARP_DECODER is not set
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_XMP_DECODER=y
CONFIG_RC_DEVICES=y
CONFIG_IR_ENE=m
CONFIG_IR_FINTEK=m
CONFIG_IR_GPIO_CIR=y
CONFIG_IR_GPIO_TX=m
CONFIG_IR_HIX5HD2=m
CONFIG_IR_ITE_CIR=y
# CONFIG_IR_MESON is not set
# CONFIG_IR_MESON_TX is not set
CONFIG_IR_MTK=y
# CONFIG_IR_NUVOTON is not set
CONFIG_IR_PWM_TX=y
CONFIG_IR_RX51=y
CONFIG_IR_SERIAL=m
CONFIG_IR_SERIAL_TRANSMITTER=y
# CONFIG_IR_SPI is not set
CONFIG_IR_SUNXI=m
CONFIG_IR_WINBOND_CIR=m
# CONFIG_RC_LOOPBACK is not set
CONFIG_RC_ST=m
CONFIG_IR_IMG=m
CONFIG_IR_IMG_RAW=y
CONFIG_IR_IMG_HW=y
# CONFIG_IR_IMG_NEC is not set
# CONFIG_IR_IMG_JVC is not set
CONFIG_IR_IMG_SONY=y
CONFIG_IR_IMG_SHARP=y
# CONFIG_IR_IMG_SANYO is not set
CONFIG_IR_IMG_RC5=y
# CONFIG_IR_IMG_RC6 is not set
CONFIG_CEC_CORE=m
#
# CEC support
#
CONFIG_MEDIA_CEC_RC=y
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support
CONFIG_MEDIA_SUPPORT=m
# CONFIG_MEDIA_SUPPORT_FILTER is not set
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
#
# Media core support
#
CONFIG_VIDEO_DEV=m
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=m
# end of Media core support
#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_V4L2_JPEG_HELPER=m
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_V4L2_FWNODE=m
CONFIG_V4L2_ASYNC=m
# end of Video4Linux options
#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
# end of Media controller options
#
# Digital TV options
#
CONFIG_DVB_MMAP=y
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_DEMUX_SECTION_LOSS_LOG=y
# CONFIG_DVB_ULE_DEBUG is not set
# end of Digital TV options
#
# Media drivers
#
#
# Media drivers
#
# CONFIG_MEDIA_PCI_SUPPORT is not set
CONFIG_RADIO_ADAPTERS=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_SI4713=m
CONFIG_RADIO_TEA575X=m
CONFIG_RADIO_TEA5764=m
# CONFIG_RADIO_TEF6862 is not set
CONFIG_RADIO_WL1273=m
CONFIG_RADIO_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_PLATFORM_SI4713=m
CONFIG_I2C_SI4713=m
CONFIG_V4L_RADIO_ISA_DRIVERS=y
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_CADET is not set
CONFIG_RADIO_GEMTEK=m
CONFIG_RADIO_ISA=m
CONFIG_RADIO_RTRACK=m
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
CONFIG_RADIO_TERRATEC=m
CONFIG_RADIO_TRUST=m
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_ZOLTRIX=m
CONFIG_MEDIA_PLATFORM_DRIVERS=y
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_SDR_PLATFORM_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set
# CONFIG_VIDEO_MUX is not set
#
# Allegro DVT media platform drivers
#
# CONFIG_VIDEO_ALLEGRO_DVT is not set
#
# Amlogic media platform drivers
#
# CONFIG_VIDEO_MESON_GE2D is not set
#
# Amphion drivers
#
#
# Aspeed media platform drivers
#
# CONFIG_VIDEO_ASPEED is not set
#
# Atmel media platform drivers
#
CONFIG_VIDEO_ATMEL_ISC=m
# CONFIG_VIDEO_ATMEL_XISC is not set
CONFIG_VIDEO_ATMEL_ISC_BASE=m
CONFIG_VIDEO_ATMEL_ISI=m
# CONFIG_VIDEO_MICROCHIP_CSI2DC is not set
#
# Cadence media platform drivers
#
CONFIG_VIDEO_CADENCE_CSI2RX=m
CONFIG_VIDEO_CADENCE_CSI2TX=m
#
# Chips&Media media platform drivers
#
CONFIG_VIDEO_CODA=m
CONFIG_VIDEO_IMX_VDOA=m
#
# Intel media platform drivers
#
CONFIG_VIDEO_PXA27x=m
#
# Marvell media platform drivers
#
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_VIDEO_MMP_CAMERA=m
#
# Mediatek media platform drivers
#
CONFIG_VIDEO_MEDIATEK_JPEG=m
# CONFIG_VIDEO_MEDIATEK_MDP is not set
# CONFIG_VIDEO_MEDIATEK_VPU is not set
#
# NVidia media platform drivers
#
# CONFIG_VIDEO_TEGRA_VDE is not set
#
# NXP media platform drivers
#
# CONFIG_VIDEO_IMX_MIPI_CSIS is not set
# CONFIG_VIDEO_VIU is not set
# CONFIG_VIDEO_IMX_PXP is not set
# CONFIG_VIDEO_MX2_EMMAPRP is not set
# CONFIG_VIDEO_IMX8_JPEG is not set
#
# Qualcomm media platform drivers
#
# CONFIG_VIDEO_QCOM_CAMSS is not set
#
# Renesas media platform drivers
#
CONFIG_VIDEO_RENESAS_CEU=m
# CONFIG_VIDEO_RCAR_ISP is not set
CONFIG_VIDEO_SH_VOU=m
CONFIG_VIDEO_RCAR_CSI2=m
CONFIG_VIDEO_RCAR_VIN=m
# CONFIG_VIDEO_RENESAS_FCP is not set
CONFIG_VIDEO_RENESAS_FDP1=m
CONFIG_VIDEO_RENESAS_JPU=m
CONFIG_VIDEO_RENESAS_VSP1=m
#
# Rockchip media platform drivers
#
# CONFIG_VIDEO_ROCKCHIP_RGA is not set
# CONFIG_VIDEO_ROCKCHIP_ISP1 is not set
#
# Samsung media platform drivers
#
CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
CONFIG_VIDEO_EXYNOS4_IS_COMMON=m
CONFIG_VIDEO_S5P_FIMC=m
# CONFIG_VIDEO_S5P_MIPI_CSIS is not set
# CONFIG_VIDEO_EXYNOS_FIMC_LITE is not set
CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
# CONFIG_VIDEO_EXYNOS4_ISP_DMA_CAPTURE is not set
CONFIG_VIDEO_S3C_CAMIF=m
CONFIG_VIDEO_SAMSUNG_S5P_G2D=m
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set
#
# STMicroelectronics media platform drivers
#
CONFIG_VIDEO_STI_BDISP=m
CONFIG_VIDEO_STI_DELTA=m
CONFIG_VIDEO_STI_DELTA_MJPEG=y
CONFIG_VIDEO_STI_DELTA_DRIVER=m
# CONFIG_VIDEO_STI_HVA is not set
# CONFIG_VIDEO_STM32_DCMI is not set
# CONFIG_VIDEO_STM32_DMA2D is not set
#
# Sunxi media platform drivers
#
# CONFIG_VIDEO_SUN4I_CSI is not set
CONFIG_VIDEO_SUN6I_CSI=m
# CONFIG_VIDEO_SUN6I_MIPI_CSI2 is not set
# CONFIG_VIDEO_SUN8I_A83T_MIPI_CSI2 is not set
CONFIG_VIDEO_SUN8I_DEINTERLACE=m
CONFIG_VIDEO_SUN8I_ROTATE=m
#
# Texas Instruments drivers
#
CONFIG_VIDEO_TI_VPDMA=m
CONFIG_VIDEO_TI_SC=m
CONFIG_VIDEO_TI_CSC=m
CONFIG_VIDEO_TI_CAL=m
# CONFIG_VIDEO_TI_CAL_MC is not set
CONFIG_VIDEO_TI_VPE=m
CONFIG_VIDEO_TI_VPE_DEBUG=y
CONFIG_VIDEO_AM437X_VPFE=m
CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY=m
CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE=m
# CONFIG_VIDEO_DM6446_CCDC is not set
# CONFIG_VIDEO_DM355_CCDC is not set
# CONFIG_VIDEO_DM365_ISIF is not set
CONFIG_VIDEO_DAVINCI_VPBE_DISPLAY=m
# CONFIG_VIDEO_OMAP2_VOUT is not set
CONFIG_VIDEO_OMAP3=m
# CONFIG_VIDEO_OMAP3_DEBUG is not set
#
# VIA media platform drivers
#
#
# Xilinx media platform drivers
#
CONFIG_VIDEO_XILINX=m
# CONFIG_VIDEO_XILINX_CSI2RXSS is not set
CONFIG_VIDEO_XILINX_TPG=m
CONFIG_VIDEO_XILINX_VTC=m
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_TEST_DRIVERS is not set
#
# FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
# end of Media drivers
#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y
#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers'
#
CONFIG_VIDEO_IR_I2C=m
#
# Camera sensor devices
#
CONFIG_VIDEO_APTINA_PLL=m
# CONFIG_VIDEO_AR0521 is not set
# CONFIG_VIDEO_HI556 is not set
# CONFIG_VIDEO_HI846 is not set
# CONFIG_VIDEO_HI847 is not set
# CONFIG_VIDEO_IMX208 is not set
# CONFIG_VIDEO_IMX214 is not set
CONFIG_VIDEO_IMX219=m
CONFIG_VIDEO_IMX258=m
# CONFIG_VIDEO_IMX274 is not set
CONFIG_VIDEO_IMX290=m
CONFIG_VIDEO_IMX319=m
# CONFIG_VIDEO_IMX334 is not set
# CONFIG_VIDEO_IMX335 is not set
# CONFIG_VIDEO_IMX355 is not set
# CONFIG_VIDEO_IMX412 is not set
CONFIG_VIDEO_MT9M001=m
CONFIG_VIDEO_MT9M032=m
CONFIG_VIDEO_MT9M111=m
CONFIG_VIDEO_MT9P031=m
# CONFIG_VIDEO_MT9T001 is not set
# CONFIG_VIDEO_MT9T112 is not set
CONFIG_VIDEO_MT9V011=m
CONFIG_VIDEO_MT9V032=m
CONFIG_VIDEO_MT9V111=m
CONFIG_VIDEO_NOON010PC30=m
# CONFIG_VIDEO_OG01A1B is not set
# CONFIG_VIDEO_OV02A10 is not set
# CONFIG_VIDEO_OV08D10 is not set
CONFIG_VIDEO_OV13858=m
# CONFIG_VIDEO_OV13B10 is not set
# CONFIG_VIDEO_OV2640 is not set
CONFIG_VIDEO_OV2659=m
CONFIG_VIDEO_OV2680=m
CONFIG_VIDEO_OV2685=m
# CONFIG_VIDEO_OV2740 is not set
CONFIG_VIDEO_OV5640=m
CONFIG_VIDEO_OV5645=m
CONFIG_VIDEO_OV5647=m
# CONFIG_VIDEO_OV5648 is not set
# CONFIG_VIDEO_OV5670 is not set
# CONFIG_VIDEO_OV5675 is not set
# CONFIG_VIDEO_OV5693 is not set
CONFIG_VIDEO_OV5695=m
CONFIG_VIDEO_OV6650=m
CONFIG_VIDEO_OV7251=m
CONFIG_VIDEO_OV7640=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_OV772X=m
CONFIG_VIDEO_OV7740=m
CONFIG_VIDEO_OV8856=m
# CONFIG_VIDEO_OV8865 is not set
# CONFIG_VIDEO_OV9282 is not set
CONFIG_VIDEO_OV9640=m
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_OV9734 is not set
# CONFIG_VIDEO_RDACM20 is not set
# CONFIG_VIDEO_RDACM21 is not set
# CONFIG_VIDEO_RJ54N1 is not set
CONFIG_VIDEO_S5C73M3=m
CONFIG_VIDEO_S5K4ECGX=m
# CONFIG_VIDEO_S5K5BAF is not set
CONFIG_VIDEO_S5K6A3=m
# CONFIG_VIDEO_S5K6AA is not set
CONFIG_VIDEO_SR030PC30=m
CONFIG_VIDEO_VS6624=m
# CONFIG_VIDEO_CCS is not set
CONFIG_VIDEO_ET8EK8=m
CONFIG_VIDEO_M5MOLS=m
# end of Camera sensor devices
#
# Lens drivers
#
CONFIG_VIDEO_AD5820=m
CONFIG_VIDEO_AK7375=m
CONFIG_VIDEO_DW9714=m
CONFIG_VIDEO_DW9768=m
CONFIG_VIDEO_DW9807_VCM=m
# end of Lens drivers
#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
# CONFIG_VIDEO_LM3560 is not set
CONFIG_VIDEO_LM3646=m
# end of Flash devices
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
# CONFIG_VIDEO_MSP3400 is not set
CONFIG_VIDEO_SONY_BTF_MPX=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
# CONFIG_VIDEO_TLV320AIC23B is not set
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_VP27SMPX=m
# CONFIG_VIDEO_WM8739 is not set
CONFIG_VIDEO_WM8775=m
# end of Audio decoders, processors and mixers
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
# end of RDS decoders
#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
CONFIG_VIDEO_ADV7183=m
CONFIG_VIDEO_ADV748X=m
CONFIG_VIDEO_ADV7604=m
CONFIG_VIDEO_ADV7604_CEC=y
CONFIG_VIDEO_ADV7842=m
# CONFIG_VIDEO_ADV7842_CEC is not set
# CONFIG_VIDEO_BT819 is not set
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
# CONFIG_VIDEO_ISL7998X is not set
CONFIG_VIDEO_KS0127=m
# CONFIG_VIDEO_MAX9286 is not set
CONFIG_VIDEO_ML86V7667=m
CONFIG_VIDEO_SAA7110=m
# CONFIG_VIDEO_SAA711X is not set
CONFIG_VIDEO_TC358743=m
# CONFIG_VIDEO_TC358743_CEC is not set
CONFIG_VIDEO_TVP514X=m
# CONFIG_VIDEO_TVP5150 is not set
CONFIG_VIDEO_TVP7002=m
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
CONFIG_VIDEO_TW9906=m
# CONFIG_VIDEO_TW9910 is not set
CONFIG_VIDEO_VPX3220=m
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
# end of Video decoders
#
# Video encoders
#
CONFIG_VIDEO_AD9389B=m
# CONFIG_VIDEO_ADV7170 is not set
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_ADV7343=m
CONFIG_VIDEO_ADV7393=m
CONFIG_VIDEO_ADV7511=m
# CONFIG_VIDEO_ADV7511_CEC is not set
CONFIG_VIDEO_AK881X=m
CONFIG_VIDEO_SAA7127=m
# CONFIG_VIDEO_SAA7185 is not set
CONFIG_VIDEO_THS8200=m
# end of Video encoders
#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
CONFIG_VIDEO_UPD64083=m
# end of Video improvement chips
#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set
# end of Audio/Video compression chips
#
# SDR tuner chips
#
CONFIG_SDR_MAX2175=m
# end of SDR tuner chips
#
# Miscellaneous helper chips
#
CONFIG_VIDEO_I2C=m
# CONFIG_VIDEO_M52790 is not set
CONFIG_VIDEO_ST_MIPID02=m
CONFIG_VIDEO_THS7303=m
# end of Miscellaneous helper chips
#
# Media SPI Adapters
#
CONFIG_CXD2880_SPI_DRV=m
# CONFIG_VIDEO_GS1662 is not set
# end of Media SPI Adapters
CONFIG_MEDIA_TUNER=m
#
# Customize TV tuners
#
# CONFIG_MEDIA_TUNER_E4000 is not set
# CONFIG_MEDIA_TUNER_FC0011 is not set
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
# CONFIG_MEDIA_TUNER_FC2580 is not set
CONFIG_MEDIA_TUNER_IT913X=m
# CONFIG_MEDIA_TUNER_M88RS6000T is not set
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_MC44S803=m
# CONFIG_MEDIA_TUNER_MSI001 is not set
# CONFIG_MEDIA_TUNER_MT2060 is not set
# CONFIG_MEDIA_TUNER_MT2063 is not set
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2131=m
# CONFIG_MEDIA_TUNER_MT2266 is not set
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QT1010=m
# CONFIG_MEDIA_TUNER_R820T is not set
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_SIMPLE=m
# CONFIG_MEDIA_TUNER_TDA18212 is not set
CONFIG_MEDIA_TUNER_TDA18218=m
# CONFIG_MEDIA_TUNER_TDA18250 is not set
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
# CONFIG_MEDIA_TUNER_TUA9001 is not set
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_XC5000=m
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_M88DS3103 is not set
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_STB0899=m
# CONFIG_DVB_STB6100 is not set
# CONFIG_DVB_STV090x is not set
CONFIG_DVB_STV0910=m
# CONFIG_DVB_STV6110x is not set
# CONFIG_DVB_STV6111 is not set
#
# Multistandard (cable + terrestrial) frontends
#
# CONFIG_DVB_DRXK is not set
CONFIG_DVB_MN88472=m
# CONFIG_DVB_MN88473 is not set
CONFIG_DVB_SI2165=m
CONFIG_DVB_TDA18271C2DD=m
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24116 is not set
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_MT312=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV0900=m
# CONFIG_DVB_STV6110 is not set
CONFIG_DVB_TDA10071=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8083=m
# CONFIG_DVB_TDA8261 is not set
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TUNER_ITD1000=m
# CONFIG_DVB_VES1X93 is not set
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_AF9013=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
CONFIG_DVB_DIB7000M=m
# CONFIG_DVB_DIB7000P is not set
CONFIG_DVB_DIB9000=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_EC100=m
# CONFIG_DVB_L64781 is not set
CONFIG_DVB_MT352=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_RTL2830=m
# CONFIG_DVB_RTL2832 is not set
# CONFIG_DVB_S5H1432 is not set
# CONFIG_DVB_SI2168 is not set
CONFIG_DVB_SP887X=m
# CONFIG_DVB_STV0367 is not set
CONFIG_DVB_TDA10048=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_ZD1301_DEMOD=m
# CONFIG_DVB_ZL10353 is not set
# CONFIG_DVB_CXD2880 is not set
#
# DVB-C (cable) frontends
#
CONFIG_DVB_STV0297=m
# CONFIG_DVB_TDA10021 is not set
CONFIG_DVB_TDA10023=m
CONFIG_DVB_VES1820=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_AU8522=m
# CONFIG_DVB_AU8522_DTV is not set
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_BCM3510=m
# CONFIG_DVB_LG2160 is not set
# CONFIG_DVB_LGDT3305 is not set
# CONFIG_DVB_LGDT3306A is not set
CONFIG_DVB_LGDT330X=m
# CONFIG_DVB_MXL692 is not set
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_OR51211=m
# CONFIG_DVB_S5H1409 is not set
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
CONFIG_DVB_S921=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_MN88443X=m
CONFIG_DVB_TC90522=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_A8293=m
CONFIG_DVB_AF9033=m
CONFIG_DVB_ASCOT2E=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_HELENE=m
CONFIG_DVB_HORUS3A=m
# CONFIG_DVB_ISL6405 is not set
CONFIG_DVB_ISL6421=m
# CONFIG_DVB_ISL6423 is not set
CONFIG_DVB_IX2505V=m
CONFIG_DVB_LGS8GL5=m
# CONFIG_DVB_LGS8GXX is not set
# CONFIG_DVB_LNBH25 is not set
# CONFIG_DVB_LNBH29 is not set
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
# CONFIG_DVB_M88RS2000 is not set
# CONFIG_DVB_TDA665x is not set
CONFIG_DVB_DRX39XYJ=m
#
# Common Interface (EN50221) controller drivers
#
# CONFIG_DVB_CXD2099 is not set
CONFIG_DVB_SP2=m
# end of Customise DVB Frontends
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
# end of Media ancillary drivers
#
# Graphics support
#
CONFIG_IMX_IPUV3_CORE=m
# CONFIG_DRM is not set
#
# ARM devices
#
# end of ARM devices
#
# Frame buffer Devices
#
# CONFIG_FB is not set
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_OMAP1 is not set
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_DA903X=m
CONFIG_BACKLIGHT_DA9052=m
CONFIG_BACKLIGHT_MAX8925=m
CONFIG_BACKLIGHT_QCOM_WLED=m
# CONFIG_BACKLIGHT_WM831X is not set
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
# CONFIG_BACKLIGHT_PCF50633 is not set
CONFIG_BACKLIGHT_AAT2870=m
CONFIG_BACKLIGHT_LM3630A=m
CONFIG_BACKLIGHT_LM3639=m
CONFIG_BACKLIGHT_LP855X=m
CONFIG_BACKLIGHT_LP8788=m
CONFIG_BACKLIGHT_PANDORA=m
# CONFIG_BACKLIGHT_AS3711 is not set
CONFIG_BACKLIGHT_GPIO=m
CONFIG_BACKLIGHT_LV5207LP=m
CONFIG_BACKLIGHT_BD6107=m
CONFIG_BACKLIGHT_ARCXCNN=m
CONFIG_BACKLIGHT_LED=m
# end of Backlight & LCD device support
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# end of Console display driver support
# end of Graphics support
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=y
CONFIG_HID_GENERIC=m
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACRUX=y
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_AUREAL=m
# CONFIG_HID_BELKIN is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_COUGAR=m
CONFIG_HID_MACALLY=m
CONFIG_HID_CMEDIA=y
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELECOM=y
# CONFIG_HID_EZKEY is not set
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=y
# CONFIG_HID_GLORIOUS is not set
CONFIG_HID_VIVALDI_COMMON=y
CONFIG_HID_VIVALDI=y
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=m
CONFIG_HID_WALTOP=m
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_XIAOMI is not set
CONFIG_HID_GYRATION=y
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
CONFIG_HID_JABRA=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=y
CONFIG_HID_LENOVO=y
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MALTRON=m
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_REDRAGON=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=y
# CONFIG_HID_NINTENDO is not set
CONFIG_HID_NTI=m
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
CONFIG_HID_PETALYNX=m
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_PLANTRONICS=y
# CONFIG_HID_PLAYSTATION is not set
# CONFIG_HID_RAZER is not set
CONFIG_HID_PRIMAX=m
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SEMITEK is not set
CONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=y
CONFIG_HID_THINGM=y
CONFIG_HID_UDRAW_PS3=y
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
CONFIG_HID_ALPS=m
# end of Special HID drivers
#
# I2C HID support
#
# CONFIG_I2C_HID_OF is not set
# CONFIG_I2C_HID_OF_ELAN is not set
# CONFIG_I2C_HID_OF_GOODIX is not set
# end of I2C HID support
#
# Intel ISH HID support
#
# end of Intel ISH HID support
#
# AMD SFH HID Support
#
# CONFIG_AMD_SFH_HID is not set
# end of AMD SFH HID Support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFS_BSG=y
# CONFIG_SCSI_UFS_CRYPTO is not set
# CONFIG_SCSI_UFS_HPB is not set
# CONFIG_SCSI_UFS_HWMON is not set
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFS_DWC_TC_PCI is not set
CONFIG_SCSI_UFSHCD_PLATFORM=m
CONFIG_SCSI_UFS_CDNS_PLATFORM=m
CONFIG_SCSI_UFS_DWC_TC_PLATFORM=m
# CONFIG_SCSI_UFS_HISI is not set
# CONFIG_SCSI_UFS_RENESAS is not set
CONFIG_SCSI_UFS_TI_J721E=m
CONFIG_SCSI_UFS_EXYNOS=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
CONFIG_LEDS_CLASS_MULTICOLOR=y
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
CONFIG_LEDS_ARIEL=m
CONFIG_LEDS_AW2013=m
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
CONFIG_LEDS_CR0014114=y
# CONFIG_LEDS_EL15203000 is not set
CONFIG_LEDS_TURRIS_OMNIA=y
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_LM3532=m
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_LM3692X=m
CONFIG_LEDS_MT6323=m
# CONFIG_LEDS_S3C24XX is not set
CONFIG_LEDS_COBALT_QUBE=m
# CONFIG_LEDS_COBALT_RAQ is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP50XX=m
# CONFIG_LEDS_LP55XX_COMMON is not set
CONFIG_LEDS_LP8788=m
CONFIG_LEDS_LP8860=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA955X_GPIO=y
CONFIG_LEDS_PCA963X=y
# CONFIG_LEDS_WM831X_STATUS is not set
CONFIG_LEDS_WM8350=y
# CONFIG_LEDS_DA903X is not set
# CONFIG_LEDS_DA9052 is not set
# CONFIG_LEDS_DAC124S085 is not set
CONFIG_LEDS_PWM=m
CONFIG_LEDS_REGULATOR=m
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_NS2=y
CONFIG_LEDS_NETXBIG=y
# CONFIG_LEDS_ASIC3 is not set
CONFIG_LEDS_TCA6507=m
# CONFIG_LEDS_TLC591XX is not set
CONFIG_LEDS_MAX77650=m
CONFIG_LEDS_MAX8997=y
CONFIG_LEDS_LM355x=y
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_MENF21BMC=m
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=m
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_SYSCON=y
# CONFIG_LEDS_PM8058 is not set
CONFIG_LEDS_MLXREG=m
# CONFIG_LEDS_USER is not set
CONFIG_LEDS_SPI_BYTE=y
CONFIG_LEDS_TI_LMU_COMMON=y
# CONFIG_LEDS_LM3697 is not set
CONFIG_LEDS_LM36274=m
CONFIG_LEDS_IP30=m
# CONFIG_LEDS_BCM63138 is not set
# CONFIG_LEDS_LGM is not set
#
# Flash and Torch LED drivers
#
#
# RGB LED drivers
#
# CONFIG_LEDS_PWM_MULTICOLOR is not set
# CONFIG_LEDS_QCOM_LPG is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_ONESHOT=y
# CONFIG_LEDS_TRIGGER_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_ACTIVITY=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_NETDEV=y
# CONFIG_LEDS_TRIGGER_PATTERN is not set
# CONFIG_LEDS_TRIGGER_AUDIO is not set
# CONFIG_LEDS_TRIGGER_TTY is not set
#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
# CONFIG_RTC_LIB_KUNIT_TEST is not set
# CONFIG_RTC_NVMEM is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_ABB5ZES3=y
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_BRCMSTB=y
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1307_CENTURY=y
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1374_WDT=y
# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_HYM8563=m
CONFIG_RTC_DRV_LP8788=m
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX8925=y
# CONFIG_RTC_DRV_MAX8998 is not set
# CONFIG_RTC_DRV_MAX8997 is not set
CONFIG_RTC_DRV_MAX77686=y
# CONFIG_RTC_DRV_NCT3018Y is not set
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=y
# CONFIG_RTC_DRV_ISL12022 is not set
CONFIG_RTC_DRV_ISL12026=y
CONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=m
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_RC5T619=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8010=m
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
CONFIG_RTC_DRV_S5M=y
CONFIG_RTC_DRV_SD3078=y
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=y
# CONFIG_RTC_DRV_M41T94 is not set
CONFIG_RTC_DRV_DS1302=y
CONFIG_RTC_DRV_DS1305=y
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
CONFIG_RTC_DRV_DS1390=m
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RX4581=y
# CONFIG_RTC_DRV_RS5C348 is not set
CONFIG_RTC_DRV_MAX6902=m
# CONFIG_RTC_DRV_PCF2123 is not set
CONFIG_RTC_DRV_MCP795=y
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=y
# CONFIG_RTC_DRV_RX6110 is not set
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_DS1286=y
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1685_FAMILY=y
CONFIG_RTC_DRV_DS1685=y
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=y
# CONFIG_RTC_DRV_DA9052 is not set
CONFIG_RTC_DRV_DA9055=m
CONFIG_RTC_DRV_DA9063=m
# CONFIG_RTC_DRV_EFI is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
CONFIG_RTC_DRV_BQ4802=m
# CONFIG_RTC_DRV_RP5C01 is not set
CONFIG_RTC_DRV_V3020=y
# CONFIG_RTC_DRV_GAMECUBE is not set
CONFIG_RTC_DRV_WM831X=m
CONFIG_RTC_DRV_WM8350=y
CONFIG_RTC_DRV_SC27XX=y
# CONFIG_RTC_DRV_SPEAR is not set
# CONFIG_RTC_DRV_PCF50633 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_ASM9260 is not set
# CONFIG_RTC_DRV_DAVINCI is not set
# CONFIG_RTC_DRV_DIGICOLOR is not set
CONFIG_RTC_DRV_FSL_FTM_ALARM=y
CONFIG_RTC_DRV_MESON=m
CONFIG_RTC_DRV_MESON_VRTC=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_RTC_DRV_S3C=y
CONFIG_RTC_DRV_EP93XX=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_RTC_DRV_AT91SAM9=m
# CONFIG_RTC_DRV_RZN1 is not set
# CONFIG_RTC_DRV_GENERIC is not set
CONFIG_RTC_DRV_VT8500=m
# CONFIG_RTC_DRV_SUN6I is not set
CONFIG_RTC_DRV_SUNXI=y
CONFIG_RTC_DRV_MV=m
CONFIG_RTC_DRV_ARMADA38X=m
CONFIG_RTC_DRV_CADENCE=m
CONFIG_RTC_DRV_FTRTC010=m
# CONFIG_RTC_DRV_STMP is not set
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_JZ4740=y
CONFIG_RTC_DRV_LPC24XX=y
CONFIG_RTC_DRV_LPC32XX=m
CONFIG_RTC_DRV_PM8XXX=y
CONFIG_RTC_DRV_TEGRA=m
# CONFIG_RTC_DRV_MXC is not set
# CONFIG_RTC_DRV_MXC_V2 is not set
CONFIG_RTC_DRV_SNVS=y
# CONFIG_RTC_DRV_MOXART is not set
CONFIG_RTC_DRV_MT2712=y
CONFIG_RTC_DRV_MT6397=y
CONFIG_RTC_DRV_MT7622=y
CONFIG_RTC_DRV_XGENE=m
CONFIG_RTC_DRV_R7301=m
# CONFIG_RTC_DRV_STM32 is not set
CONFIG_RTC_DRV_RTD119X=y
# CONFIG_RTC_DRV_ASPEED is not set
# CONFIG_RTC_DRV_TI_K3 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
# CONFIG_RTC_DRV_MSC313 is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
CONFIG_UDMABUF=y
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
CONFIG_DMABUF_HEAPS=y
# CONFIG_DMABUF_SYSFS_STATS is not set
# CONFIG_DMABUF_HEAPS_SYSTEM is not set
# end of DMABUF options
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_DMEM_GENIRQ=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=y
CONFIG_UIO_NETX=y
# CONFIG_UIO_PRUSS is not set
CONFIG_UIO_MF624=m
# CONFIG_VFIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set
# CONFIG_VDPA is not set
# CONFIG_VHOST_MENU is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
CONFIG_GREYBUS=m
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_GOLDFISH is not set
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=m
CONFIG_MLXREG_IO=m
# CONFIG_MLXREG_LC is not set
# CONFIG_NVSW_SN2201 is not set
# CONFIG_OLPC_XO175 is not set
CONFIG_SURFACE_PLATFORMS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_WM831X=y
#
# Clock driver for ARM Reference designs
#
# CONFIG_CLK_ICST is not set
CONFIG_CLK_SP810=y
# end of Clock driver for ARM Reference designs
CONFIG_CLK_HSDK=y
# CONFIG_LMK04832 is not set
# CONFIG_COMMON_CLK_APPLE_NCO is not set
CONFIG_COMMON_CLK_MAX77686=m
CONFIG_COMMON_CLK_MAX9485=y
CONFIG_COMMON_CLK_SCMI=y
CONFIG_COMMON_CLK_SCPI=y
CONFIG_COMMON_CLK_SI5341=m
CONFIG_COMMON_CLK_SI5351=m
CONFIG_COMMON_CLK_SI514=m
CONFIG_COMMON_CLK_SI544=m
CONFIG_COMMON_CLK_SI570=m
CONFIG_COMMON_CLK_BM1880=y
CONFIG_COMMON_CLK_CDCE706=y
# CONFIG_COMMON_CLK_TPS68470 is not set
CONFIG_COMMON_CLK_CDCE925=m
CONFIG_COMMON_CLK_CS2000_CP=y
# CONFIG_COMMON_CLK_EN7523 is not set
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
CONFIG_COMMON_CLK_FSL_SAI=y
# CONFIG_COMMON_CLK_GEMINI is not set
# CONFIG_COMMON_CLK_LAN966X is not set
CONFIG_COMMON_CLK_ASPEED=y
CONFIG_COMMON_CLK_S2MPS11=m
CONFIG_CLK_TWL6040=y
CONFIG_COMMON_CLK_AXI_CLKGEN=m
# CONFIG_CLK_QORIQ is not set
CONFIG_CLK_LS1028A_PLLDIG=m
CONFIG_COMMON_CLK_XGENE=y
# CONFIG_COMMON_CLK_PALMAS is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_OXNAS is not set
# CONFIG_COMMON_CLK_RS9_PCIE is not set
CONFIG_COMMON_CLK_VC5=y
CONFIG_COMMON_CLK_MMP2_AUDIO=y
# CONFIG_COMMON_CLK_BD718XX is not set
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
CONFIG_CLK_ACTIONS=y
CONFIG_CLK_OWL_S500=y
CONFIG_CLK_OWL_S700=y
# CONFIG_CLK_OWL_S900 is not set
# CONFIG_CLK_BAIKAL_T1 is not set
CONFIG_CLK_BCM2711_DVP=m
# CONFIG_CLK_BCM2835 is not set
# CONFIG_CLK_BCM_63XX is not set
# CONFIG_CLK_BCM_63XX_GATE is not set
CONFIG_CLK_BCM_KONA=y
CONFIG_COMMON_CLK_IPROC=y
CONFIG_CLK_BCM_CYGNUS=y
CONFIG_CLK_BCM_HR2=y
CONFIG_CLK_BCM_NSP=y
# CONFIG_CLK_BCM_NS2 is not set
CONFIG_CLK_BCM_SR=y
CONFIG_CLK_RASPBERRYPI=y
CONFIG_COMMON_CLK_HI3516CV300=y
# CONFIG_COMMON_CLK_HI3519 is not set
# CONFIG_COMMON_CLK_HI3559A is not set
# CONFIG_COMMON_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_HI3670 is not set
CONFIG_COMMON_CLK_HI3798CV200=m
CONFIG_COMMON_CLK_HI6220=y
CONFIG_RESET_HISI=y
CONFIG_COMMON_CLK_BOSTON=y
CONFIG_MXC_CLK=y
CONFIG_CLK_IMX8MM=y
# CONFIG_CLK_IMX8MN is not set
CONFIG_CLK_IMX8MP=y
# CONFIG_CLK_IMX8MQ is not set
# CONFIG_CLK_IMX8ULP is not set
# CONFIG_CLK_IMX93 is not set
#
# Ingenic SoCs drivers
#
CONFIG_INGENIC_CGU_COMMON=y
CONFIG_INGENIC_CGU_JZ4740=y
CONFIG_INGENIC_CGU_JZ4725B=y
# CONFIG_INGENIC_CGU_JZ4760 is not set
CONFIG_INGENIC_CGU_JZ4770=y
# CONFIG_INGENIC_CGU_JZ4780 is not set
CONFIG_INGENIC_CGU_X1000=y
# CONFIG_INGENIC_CGU_X1830 is not set
# CONFIG_INGENIC_TCU_CLK is not set
# end of Ingenic SoCs drivers
# CONFIG_COMMON_CLK_KEYSTONE is not set
CONFIG_TI_SYSCON_CLK=m
#
# Clock driver for MediaTek SoC
#
CONFIG_COMMON_CLK_MEDIATEK=y
CONFIG_COMMON_CLK_MT2701=y
CONFIG_COMMON_CLK_MT2701_MMSYS=y
CONFIG_COMMON_CLK_MT2701_IMGSYS=y
# CONFIG_COMMON_CLK_MT2701_VDECSYS is not set
# CONFIG_COMMON_CLK_MT2701_HIFSYS is not set
CONFIG_COMMON_CLK_MT2701_ETHSYS=y
CONFIG_COMMON_CLK_MT2701_BDPSYS=y
CONFIG_COMMON_CLK_MT2701_AUDSYS=y
# CONFIG_COMMON_CLK_MT2701_G3DSYS is not set
CONFIG_COMMON_CLK_MT2712=y
CONFIG_COMMON_CLK_MT2712_BDPSYS=y
# CONFIG_COMMON_CLK_MT2712_IMGSYS is not set
CONFIG_COMMON_CLK_MT2712_JPGDECSYS=y
# CONFIG_COMMON_CLK_MT2712_MFGCFG is not set
# CONFIG_COMMON_CLK_MT2712_MMSYS is not set
# CONFIG_COMMON_CLK_MT2712_VDECSYS is not set
CONFIG_COMMON_CLK_MT2712_VENCSYS=y
CONFIG_COMMON_CLK_MT6765=y
CONFIG_COMMON_CLK_MT6765_AUDIOSYS=y
# CONFIG_COMMON_CLK_MT6765_CAMSYS is not set
# CONFIG_COMMON_CLK_MT6765_GCESYS is not set
CONFIG_COMMON_CLK_MT6765_MMSYS=y
CONFIG_COMMON_CLK_MT6765_IMGSYS=y
CONFIG_COMMON_CLK_MT6765_VCODECSYS=y
CONFIG_COMMON_CLK_MT6765_MFGSYS=y
# CONFIG_COMMON_CLK_MT6765_MIPI0ASYS is not set
CONFIG_COMMON_CLK_MT6765_MIPI0BSYS=y
CONFIG_COMMON_CLK_MT6765_MIPI1ASYS=y
# CONFIG_COMMON_CLK_MT6765_MIPI1BSYS is not set
# CONFIG_COMMON_CLK_MT6765_MIPI2ASYS is not set
# CONFIG_COMMON_CLK_MT6765_MIPI2BSYS is not set
CONFIG_COMMON_CLK_MT6779=y
CONFIG_COMMON_CLK_MT6779_MMSYS=y
# CONFIG_COMMON_CLK_MT6779_IMGSYS is not set
# CONFIG_COMMON_CLK_MT6779_IPESYS is not set
CONFIG_COMMON_CLK_MT6779_CAMSYS=y
# CONFIG_COMMON_CLK_MT6779_VDECSYS is not set
# CONFIG_COMMON_CLK_MT6779_VENCSYS is not set
CONFIG_COMMON_CLK_MT6779_MFGCFG=y
CONFIG_COMMON_CLK_MT6779_AUDSYS=y
CONFIG_COMMON_CLK_MT6797=y
# CONFIG_COMMON_CLK_MT6797_MMSYS is not set
CONFIG_COMMON_CLK_MT6797_IMGSYS=y
# CONFIG_COMMON_CLK_MT6797_VDECSYS is not set
CONFIG_COMMON_CLK_MT6797_VENCSYS=y
CONFIG_COMMON_CLK_MT7622=y
CONFIG_COMMON_CLK_MT7622_ETHSYS=y
# CONFIG_COMMON_CLK_MT7622_HIFSYS is not set
# CONFIG_COMMON_CLK_MT7622_AUDSYS is not set
CONFIG_COMMON_CLK_MT7629=y
# CONFIG_COMMON_CLK_MT7629_ETHSYS is not set
# CONFIG_COMMON_CLK_MT7629_HIFSYS is not set
# CONFIG_COMMON_CLK_MT7986 is not set
# CONFIG_COMMON_CLK_MT8135 is not set
CONFIG_COMMON_CLK_MT8167=y
# CONFIG_COMMON_CLK_MT8167_AUDSYS is not set
# CONFIG_COMMON_CLK_MT8167_IMGSYS is not set
# CONFIG_COMMON_CLK_MT8167_MFGCFG is not set
# CONFIG_COMMON_CLK_MT8167_MMSYS is not set
# CONFIG_COMMON_CLK_MT8167_VDECSYS is not set
CONFIG_COMMON_CLK_MT8173=y
CONFIG_COMMON_CLK_MT8173_MMSYS=y
CONFIG_COMMON_CLK_MT8183=y
CONFIG_COMMON_CLK_MT8183_AUDIOSYS=y
# CONFIG_COMMON_CLK_MT8183_CAMSYS is not set
# CONFIG_COMMON_CLK_MT8183_IMGSYS is not set
# CONFIG_COMMON_CLK_MT8183_IPU_CORE0 is not set
CONFIG_COMMON_CLK_MT8183_IPU_CORE1=y
# CONFIG_COMMON_CLK_MT8183_IPU_ADL is not set
CONFIG_COMMON_CLK_MT8183_IPU_CONN=y
# CONFIG_COMMON_CLK_MT8183_MFGCFG is not set
# CONFIG_COMMON_CLK_MT8183_MMSYS is not set
CONFIG_COMMON_CLK_MT8183_VDECSYS=y
CONFIG_COMMON_CLK_MT8183_VENCSYS=y
# CONFIG_COMMON_CLK_MT8186 is not set
# CONFIG_COMMON_CLK_MT8192 is not set
# CONFIG_COMMON_CLK_MT8195 is not set
# CONFIG_COMMON_CLK_MT8516 is not set
# end of Clock driver for MediaTek SoC
#
# Clock support for Amlogic platforms
#
# end of Clock support for Amlogic platforms
# CONFIG_MSTAR_MSC313_MPLL is not set
# CONFIG_MCHP_CLK_MPFS is not set
# CONFIG_COMMON_CLK_PISTACHIO is not set
CONFIG_QCOM_GDSC=y
CONFIG_QCOM_RPMCC=y
CONFIG_COMMON_CLK_QCOM=y
# CONFIG_QCOM_A53PLL is not set
# CONFIG_QCOM_A7PLL is not set
CONFIG_QCOM_CLK_APCS_MSM8916=y
# CONFIG_QCOM_CLK_APCS_SDX55 is not set
CONFIG_QCOM_CLK_SMD_RPM=m
# CONFIG_QCOM_CLK_RPMH is not set
# CONFIG_APQ_GCC_8084 is not set
# CONFIG_APQ_MMCC_8084 is not set
CONFIG_IPQ_APSS_PLL=m
CONFIG_IPQ_APSS_6018=m
# CONFIG_IPQ_GCC_4019 is not set
CONFIG_IPQ_GCC_6018=y
CONFIG_IPQ_GCC_806X=m
CONFIG_IPQ_LCC_806X=m
CONFIG_IPQ_GCC_8074=m
CONFIG_MSM_GCC_8660=y
# CONFIG_MSM_GCC_8916 is not set
CONFIG_MSM_GCC_8939=y
CONFIG_MSM_GCC_8960=y
# CONFIG_MSM_LCC_8960 is not set
# CONFIG_MDM_GCC_9607 is not set
CONFIG_MDM_GCC_9615=y
# CONFIG_MDM_LCC_9615 is not set
CONFIG_MSM_MMCC_8960=y
# CONFIG_MSM_GCC_8953 is not set
CONFIG_MSM_GCC_8974=m
# CONFIG_MSM_MMCC_8974 is not set
# CONFIG_MSM_GCC_8976 is not set
# CONFIG_MSM_MMCC_8994 is not set
# CONFIG_MSM_GCC_8994 is not set
CONFIG_MSM_GCC_8996=y
# CONFIG_MSM_MMCC_8996 is not set
CONFIG_MSM_GCC_8998=y
CONFIG_MSM_GPUCC_8998=y
CONFIG_MSM_MMCC_8998=y
# CONFIG_QCM_GCC_2290 is not set
# CONFIG_QCM_DISPCC_2290 is not set
CONFIG_QCS_GCC_404=y
# CONFIG_SC_CAMCC_7180 is not set
# CONFIG_SC_CAMCC_7280 is not set
CONFIG_SC_DISPCC_7180=m
# CONFIG_SC_DISPCC_7280 is not set
CONFIG_SC_GCC_7180=y
# CONFIG_SC_GCC_7280 is not set
# CONFIG_SC_GCC_8180X is not set
# CONFIG_SC_GCC_8280XP is not set
CONFIG_SC_GPUCC_7180=y
# CONFIG_SC_GPUCC_7280 is not set
# CONFIG_SC_LPASSCC_7280 is not set
CONFIG_SC_LPASS_CORECC_7180=m
# CONFIG_SC_LPASS_CORECC_7280 is not set
CONFIG_SC_MSS_7180=m
CONFIG_SC_VIDEOCC_7180=y
# CONFIG_SC_VIDEOCC_7280 is not set
CONFIG_SDM_CAMCC_845=y
CONFIG_SDM_GCC_660=m
# CONFIG_SDM_MMCC_660 is not set
# CONFIG_SDM_GPUCC_660 is not set
CONFIG_QCS_TURING_404=m
CONFIG_QCS_Q6SSTOP_404=y
CONFIG_SDM_GCC_845=y
CONFIG_SDM_GPUCC_845=m
# CONFIG_SDM_VIDEOCC_845 is not set
# CONFIG_SDM_DISPCC_845 is not set
# CONFIG_SDM_LPASSCC_845 is not set
# CONFIG_SDX_GCC_55 is not set
# CONFIG_SDX_GCC_65 is not set
# CONFIG_SM_CAMCC_8250 is not set
# CONFIG_SM_CAMCC_8450 is not set
CONFIG_SM_DISPCC_8250=y
# CONFIG_SM_GCC_6115 is not set
# CONFIG_SM_GCC_6125 is not set
# CONFIG_SM_GCC_6350 is not set
CONFIG_SM_GCC_8150=y
CONFIG_SM_GCC_8250=y
# CONFIG_SM_GCC_8350 is not set
# CONFIG_SM_GCC_8450 is not set
# CONFIG_SM_GPUCC_6350 is not set
# CONFIG_SM_GPUCC_8150 is not set
CONFIG_SM_GPUCC_8250=m
# CONFIG_SM_GPUCC_8350 is not set
CONFIG_SM_VIDEOCC_8150=y
# CONFIG_SM_VIDEOCC_8250 is not set
# CONFIG_SPMI_PMIC_CLKDIV is not set
CONFIG_QCOM_HFPLL=y
# CONFIG_KPSS_XCC is not set
# CONFIG_CLK_GFM_LPASS_SM8250 is not set
# CONFIG_CLK_MT7621 is not set
CONFIG_CLK_RENESAS=y
# CONFIG_CLK_EMEV2 is not set
CONFIG_CLK_RZA1=y
# CONFIG_CLK_R7S9210 is not set
CONFIG_CLK_R8A73A4=y
# CONFIG_CLK_R8A7740 is not set
CONFIG_CLK_R8A7742=y
CONFIG_CLK_R8A7743=y
CONFIG_CLK_R8A7745=y
CONFIG_CLK_R8A77470=y
# CONFIG_CLK_R8A774A1 is not set
# CONFIG_CLK_R8A774B1 is not set
CONFIG_CLK_R8A774C0=y
# CONFIG_CLK_R8A774E1 is not set
# CONFIG_CLK_R8A7778 is not set
CONFIG_CLK_R8A7779=y
# CONFIG_CLK_R8A7790 is not set
CONFIG_CLK_R8A7791=y
# CONFIG_CLK_R8A7792 is not set
CONFIG_CLK_R8A7794=y
CONFIG_CLK_R8A7795=y
CONFIG_CLK_R8A77960=y
CONFIG_CLK_R8A77961=y
# CONFIG_CLK_R8A77965 is not set
# CONFIG_CLK_R8A77970 is not set
# CONFIG_CLK_R8A77980 is not set
CONFIG_CLK_R8A77990=y
# CONFIG_CLK_R8A77995 is not set
# CONFIG_CLK_R8A779A0 is not set
# CONFIG_CLK_R8A779F0 is not set
# CONFIG_CLK_R8A779G0 is not set
CONFIG_CLK_R9A06G032=y
# CONFIG_CLK_R9A07G043 is not set
# CONFIG_CLK_R9A07G044 is not set
# CONFIG_CLK_R9A07G054 is not set
# CONFIG_CLK_R9A09G011 is not set
# CONFIG_CLK_SH73A0 is not set
CONFIG_CLK_RCAR_CPG_LIB=y
CONFIG_CLK_RCAR_GEN2_CPG=y
CONFIG_CLK_RCAR_GEN3_CPG=y
# CONFIG_CLK_RCAR_GEN4_CPG is not set
# CONFIG_CLK_RCAR_USB2_CLOCK_SEL is not set
# CONFIG_CLK_RZG2L is not set
CONFIG_CLK_RENESAS_CPG_MSSR=y
CONFIG_CLK_RENESAS_CPG_MSTP=y
CONFIG_CLK_RENESAS_DIV6=y
CONFIG_COMMON_CLK_SAMSUNG=y
# CONFIG_S3C64XX_COMMON_CLK is not set
# CONFIG_S5PV210_COMMON_CLK is not set
# CONFIG_EXYNOS_3250_COMMON_CLK is not set
# CONFIG_EXYNOS_4_COMMON_CLK is not set
# CONFIG_EXYNOS_5250_COMMON_CLK is not set
# CONFIG_EXYNOS_5260_COMMON_CLK is not set
# CONFIG_EXYNOS_5410_COMMON_CLK is not set
# CONFIG_EXYNOS_5420_COMMON_CLK is not set
CONFIG_EXYNOS_ARM64_COMMON_CLK=y
# CONFIG_EXYNOS_AUDSS_CLK_CON is not set
# CONFIG_EXYNOS_CLKOUT is not set
# CONFIG_S3C2410_COMMON_CLK is not set
# CONFIG_S3C2412_COMMON_CLK is not set
# CONFIG_S3C2443_COMMON_CLK is not set
# CONFIG_TESLA_FSD_COMMON_CLK is not set
# CONFIG_CLK_SIFIVE is not set
# CONFIG_CLK_INTEL_SOCFPGA is not set
CONFIG_SPRD_COMMON_CLK=m
CONFIG_SPRD_SC9860_CLK=m
CONFIG_SPRD_SC9863A_CLK=m
# CONFIG_CLK_STARFIVE_JH7100 is not set
# CONFIG_CLK_SUNXI is not set
# CONFIG_SUNXI_CCU is not set
# CONFIG_COMMON_CLK_TI_ADPLL is not set
CONFIG_CLK_UNIPHIER=y
# CONFIG_COMMON_CLK_VISCONTI is not set
# CONFIG_CLK_LGM_CGU is not set
CONFIG_XILINX_VCU=m
# CONFIG_COMMON_CLK_ZYNQMP is not set
# CONFIG_CLK_KUNIT_TEST is not set
# CONFIG_CLK_GATE_KUNIT_TEST is not set
CONFIG_HWSPINLOCK=y
# CONFIG_HWSPINLOCK_OMAP is not set
# CONFIG_HWSPINLOCK_QCOM is not set
CONFIG_HWSPINLOCK_SPRD=y
CONFIG_HWSPINLOCK_STM32=y
# CONFIG_HWSPINLOCK_SUN6I is not set
# CONFIG_HSEM_U8500 is not set
#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
CONFIG_BCM2835_TIMER=y
# CONFIG_BCM_KONA_TIMER is not set
CONFIG_DAVINCI_TIMER=y
CONFIG_DIGICOLOR_TIMER=y
# CONFIG_OMAP_DM_TIMER is not set
CONFIG_DW_APB_TIMER=y
# CONFIG_FTTMR010_TIMER is not set
# CONFIG_IXP4XX_TIMER is not set
CONFIG_MESON6_TIMER=y
CONFIG_OWL_TIMER=y
# CONFIG_RDA_TIMER is not set
CONFIG_SUN4I_TIMER=y
CONFIG_SUN5I_HSTIMER=y
CONFIG_TEGRA_TIMER=y
# CONFIG_TEGRA186_TIMER is not set
CONFIG_VT8500_TIMER=y
# CONFIG_NPCM7XX_TIMER is not set
CONFIG_CADENCE_TTC_TIMER=y
CONFIG_ASM9260_TIMER=y
# CONFIG_CLKSRC_DBX500_PRCMU is not set
# CONFIG_CLPS711X_TIMER is not set
CONFIG_MXS_TIMER=y
CONFIG_NSPIRE_TIMER=y
CONFIG_INTEGRATOR_AP_TIMER=y
CONFIG_CLKSRC_PISTACHIO=y
CONFIG_CLKSRC_TI_32K=y
CONFIG_CLKSRC_STM32_LP=y
# CONFIG_CLKSRC_MPS2 is not set
# CONFIG_ARC_TIMERS is not set
# CONFIG_ARM_TIMER_SP804 is not set
CONFIG_ARMV7M_SYSTICK=y
# CONFIG_ATMEL_PIT is not set
CONFIG_ATMEL_ST=y
# CONFIG_CLKSRC_SAMSUNG_PWM is not set
# CONFIG_FSL_FTM_TIMER is not set
CONFIG_OXNAS_RPS_TIMER=y
# CONFIG_MTK_TIMER is not set
# CONFIG_CLKSRC_JCORE_PIT is not set
CONFIG_SH_TIMER_CMT=y
CONFIG_SH_TIMER_MTU2=y
# CONFIG_RENESAS_OSTM is not set
# CONFIG_SH_TIMER_TMU is not set
CONFIG_EM_TIMER_STI=y
CONFIG_CLKSRC_VERSATILE=y
# CONFIG_CLKSRC_PXA is not set
# CONFIG_TIMER_IMX_SYS_CTR is not set
# CONFIG_CLKSRC_ST_LPC is not set
# CONFIG_GXP_TIMER is not set
CONFIG_RISCV_TIMER=y
# CONFIG_CLINT_TIMER is not set
# CONFIG_MSC313E_TIMER is not set
# CONFIG_INGENIC_TIMER is not set
# CONFIG_INGENIC_SYSOST is not set
# CONFIG_INGENIC_OST is not set
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
CONFIG_IOMMU_IO_PGTABLE_ARMV7S=y
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S_SELFTEST is not set
# end of Generic IOMMU Pagetable Support
CONFIG_IOMMU_DEBUGFS=y
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y
CONFIG_OF_IOMMU=y
# CONFIG_OMAP_IOMMU is not set
CONFIG_ROCKCHIP_IOMMU=y
# CONFIG_SUN50I_IOMMU is not set
CONFIG_EXYNOS_IOMMU=y
CONFIG_EXYNOS_IOMMU_DEBUG=y
# CONFIG_IPMMU_VMSA is not set
# CONFIG_APPLE_DART is not set
# CONFIG_ARM_SMMU is not set
# CONFIG_S390_CCW_IOMMU is not set
CONFIG_S390_AP_IOMMU=y
CONFIG_MTK_IOMMU=y
# CONFIG_QCOM_IOMMU is not set
# CONFIG_SPRD_IOMMU is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CHAR=m
# CONFIG_RPMSG_CTRL is not set
CONFIG_RPMSG_NS=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
#
# SOC (System On Chip) specific Drivers
#
CONFIG_OWL_PM_DOMAINS_HELPER=y
CONFIG_OWL_PM_DOMAINS=y
#
# Amlogic SoC drivers
#
CONFIG_MESON_CANVAS=m
# CONFIG_MESON_CLK_MEASURE is not set
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_GX_PM_DOMAINS is not set
CONFIG_MESON_EE_PM_DOMAINS=y
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers
#
# Apple SoC drivers
#
# CONFIG_APPLE_PMGR_PWRSTATE is not set
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers
#
# ASPEED SoC drivers
#
CONFIG_ASPEED_LPC_CTRL=m
CONFIG_ASPEED_LPC_SNOOP=m
# CONFIG_ASPEED_UART_ROUTING is not set
CONFIG_ASPEED_P2A_CTRL=m
# CONFIG_ASPEED_SOCINFO is not set
# end of ASPEED SoC drivers
# CONFIG_AT91_SOC_ID is not set
# CONFIG_AT91_SOC_SFR is not set
#
# Broadcom SoC drivers
#
# CONFIG_BCM2835_POWER is not set
CONFIG_SOC_BCM63XX=y
CONFIG_SOC_BRCMSTB=y
CONFIG_BCM63XX_POWER=y
# CONFIG_BCM_PMB is not set
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
CONFIG_QUICC_ENGINE=y
CONFIG_UCC_SLOW=y
CONFIG_UCC=y
CONFIG_DPAA2_CONSOLE=y
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# CONFIG_IMX_GPCV2_PM_DOMAINS is not set
CONFIG_SOC_IMX8M=y
# end of i.MX SoC drivers
#
# IXP4xx SoC drivers
#
CONFIG_IXP4XX_QMGR=y
CONFIG_IXP4XX_NPE=m
# end of IXP4xx SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers
#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
# CONFIG_MTK_DEVAPC is not set
CONFIG_MTK_INFRACFG=y
# CONFIG_MTK_PMIC_WRAP is not set
# CONFIG_MTK_SCPSYS is not set
# CONFIG_MTK_SCPSYS_PM_DOMAINS is not set
CONFIG_MTK_MMSYS=y
# end of MediaTek SoC drivers
#
# Qualcomm SoC drivers
#
CONFIG_QCOM_COMMAND_DB=y
CONFIG_QCOM_GENI_SE=m
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_LLCC=m
CONFIG_QCOM_PDR_HELPERS=m
CONFIG_QCOM_QMI_HELPERS=m
CONFIG_QCOM_RPMH=y
CONFIG_QCOM_RPMHPD=m
CONFIG_QCOM_RPMPD=m
# CONFIG_QCOM_SMEM is not set
CONFIG_QCOM_SMD_RPM=m
# CONFIG_QCOM_SPM is not set
CONFIG_QCOM_WCNSS_CTRL=m
CONFIG_QCOM_APR=m
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers
# CONFIG_SOC_RENESAS is not set
CONFIG_ROCKCHIP_GRF=y
CONFIG_ROCKCHIP_IODOMAIN=m
CONFIG_ROCKCHIP_PM_DOMAINS=y
# CONFIG_SOC_SAMSUNG is not set
# CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TI is not set
# CONFIG_UX500_SOC_ID is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
CONFIG_DEVFREQ_GOV_USERSPACE=m
# CONFIG_DEVFREQ_GOV_PASSIVE is not set
#
# DEVFREQ Drivers
#
# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set
CONFIG_ARM_IMX_BUS_DEVFREQ=m
CONFIG_ARM_TEGRA_DEVFREQ=y
# CONFIG_ARM_MEDIATEK_CCI_DEVFREQ is not set
# CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
CONFIG_EXTCON_FSA9480=m
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_MAX3355=m
CONFIG_EXTCON_MAX8997=m
CONFIG_EXTCON_PALMAS=m
CONFIG_EXTCON_PTN5150=y
CONFIG_EXTCON_QCOM_SPMI_MISC=m
CONFIG_EXTCON_RT8973A=y
# CONFIG_EXTCON_SM5502 is not set
# CONFIG_EXTCON_USB_GPIO is not set
# CONFIG_EXTCON_USBC_TUSB320 is not set
CONFIG_MEMORY=y
CONFIG_DDR=y
CONFIG_ATMEL_SDRAMC=y
CONFIG_ATMEL_EBI=y
# CONFIG_BRCMSTB_DPFE is not set
CONFIG_BT1_L2_CTL=y
CONFIG_TI_AEMIF=y
# CONFIG_TI_EMIF is not set
# CONFIG_OMAP_GPMC is not set
# CONFIG_MVEBU_DEVBUS is not set
# CONFIG_FSL_CORENET_CF is not set
# CONFIG_FSL_IFC is not set
# CONFIG_JZ4780_NEMC is not set
CONFIG_MTK_SMI=y
# CONFIG_DA8XX_DDRCTL is not set
CONFIG_RENESAS_RPCIF=m
CONFIG_STM32_FMC2_EBI=y
# CONFIG_SAMSUNG_MC is not set
CONFIG_TEGRA_MC=y
CONFIG_TEGRA20_EMC=y
CONFIG_TEGRA30_EMC=y
CONFIG_TEGRA124_EMC=y
# CONFIG_TEGRA210_EMC is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_DMA=y
CONFIG_IIO_BUFFER_DMAENGINE=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
# CONFIG_IIO_SW_TRIGGER is not set
CONFIG_IIO_TRIGGERED_EVENT=m
#
# Accelerometers
#
CONFIG_ADIS16201=m
CONFIG_ADIS16209=m
# CONFIG_ADXL313_I2C is not set
# CONFIG_ADXL313_SPI is not set
CONFIG_ADXL345=y
# CONFIG_ADXL345_I2C is not set
CONFIG_ADXL345_SPI=y
# CONFIG_ADXL355_I2C is not set
# CONFIG_ADXL355_SPI is not set
# CONFIG_ADXL367_SPI is not set
# CONFIG_ADXL367_I2C is not set
CONFIG_ADXL372=y
CONFIG_ADXL372_SPI=y
# CONFIG_ADXL372_I2C is not set
CONFIG_BMA180=y
CONFIG_BMA220=y
CONFIG_BMA400=m
CONFIG_BMA400_I2C=m
CONFIG_BMA400_SPI=m
CONFIG_BMC150_ACCEL=m
CONFIG_BMC150_ACCEL_I2C=m
CONFIG_BMC150_ACCEL_SPI=m
# CONFIG_BMI088_ACCEL is not set
CONFIG_DA280=y
CONFIG_DA311=y
# CONFIG_DMARD06 is not set
CONFIG_DMARD09=m
CONFIG_DMARD10=m
# CONFIG_FXLS8962AF_I2C is not set
# CONFIG_FXLS8962AF_SPI is not set
# CONFIG_IIO_ST_ACCEL_3AXIS is not set
CONFIG_KXSD9=y
CONFIG_KXSD9_SPI=y
# CONFIG_KXSD9_I2C is not set
CONFIG_KXCJK1013=m
CONFIG_MC3230=y
# CONFIG_MMA7455_I2C is not set
# CONFIG_MMA7455_SPI is not set
# CONFIG_MMA7660 is not set
# CONFIG_MMA8452 is not set
# CONFIG_MMA9551 is not set
# CONFIG_MMA9553 is not set
CONFIG_MXC4005=m
CONFIG_MXC6255=m
CONFIG_SCA3000=y
# CONFIG_SCA3300 is not set
CONFIG_STK8312=m
CONFIG_STK8BA50=m
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=y
CONFIG_AD7091R5=y
# CONFIG_AD7124 is not set
# CONFIG_AD7192 is not set
CONFIG_AD7266=m
# CONFIG_AD7280 is not set
CONFIG_AD7291=y
CONFIG_AD7292=y
# CONFIG_AD7298 is not set
CONFIG_AD7476=y
# CONFIG_AD7606_IFACE_PARALLEL is not set
# CONFIG_AD7606_IFACE_SPI is not set
# CONFIG_AD7766 is not set
CONFIG_AD7768_1=y
CONFIG_AD7780=y
CONFIG_AD7791=y
CONFIG_AD7793=y
CONFIG_AD7887=y
CONFIG_AD7923=m
CONFIG_AD7949=y
CONFIG_AD799X=m
CONFIG_AD9467=y
CONFIG_ADI_AXI_ADC=y
CONFIG_ASPEED_ADC=m
CONFIG_AT91_ADC=y
# CONFIG_AT91_SAMA5D2_ADC is not set
# CONFIG_AXP20X_ADC is not set
# CONFIG_AXP288_ADC is not set
CONFIG_BCM_IPROC_ADC=m
# CONFIG_BERLIN2_ADC is not set
CONFIG_CC10001_ADC=y
# CONFIG_DA9150_GPADC is not set
CONFIG_ENVELOPE_DETECTOR=m
# CONFIG_EXYNOS_ADC is not set
CONFIG_HI8435=m
CONFIG_HX711=m
CONFIG_INA2XX_ADC=m
CONFIG_INGENIC_ADC=y
# CONFIG_IMX7D_ADC is not set
# CONFIG_IMX8QXP_ADC is not set
CONFIG_LP8788_ADC=y
CONFIG_LPC18XX_ADC=m
CONFIG_LPC32XX_ADC=m
CONFIG_LTC2471=m
# CONFIG_LTC2485 is not set
CONFIG_LTC2496=m
CONFIG_LTC2497=y
CONFIG_MAX1027=y
# CONFIG_MAX11100 is not set
# CONFIG_MAX1118 is not set
CONFIG_MAX1241=y
CONFIG_MAX1363=y
CONFIG_MAX9611=y
CONFIG_MCP320X=y
CONFIG_MCP3422=y
# CONFIG_MCP3911 is not set
# CONFIG_MEDIATEK_MT6577_AUXADC is not set
# CONFIG_MESON_SARADC is not set
CONFIG_MP2629_ADC=m
# CONFIG_NAU7802 is not set
CONFIG_NPCM_ADC=y
CONFIG_PALMAS_GPADC=m
CONFIG_QCOM_VADC_COMMON=y
# CONFIG_QCOM_PM8XXX_XOADC is not set
CONFIG_QCOM_SPMI_IADC=y
CONFIG_QCOM_SPMI_VADC=y
CONFIG_QCOM_SPMI_ADC5=m
# CONFIG_RCAR_GYRO_ADC is not set
CONFIG_RN5T618_ADC=m
CONFIG_ROCKCHIP_SARADC=m
# CONFIG_RZG2L_ADC is not set
CONFIG_SC27XX_ADC=y
CONFIG_SPEAR_ADC=y
CONFIG_SD_ADC_MODULATOR=y
# CONFIG_STM32_ADC_CORE is not set
CONFIG_STM32_DFSDM_CORE=y
CONFIG_STM32_DFSDM_ADC=m
CONFIG_STMPE_ADC=y
# CONFIG_SUN4I_GPADC is not set
# CONFIG_TI_ADC081C is not set
CONFIG_TI_ADC0832=y
CONFIG_TI_ADC084S021=y
CONFIG_TI_ADC12138=y
# CONFIG_TI_ADC108S102 is not set
# CONFIG_TI_ADC128S052 is not set
CONFIG_TI_ADC161S626=y
CONFIG_TI_ADS1015=y
CONFIG_TI_ADS7950=y
CONFIG_TI_ADS8344=y
# CONFIG_TI_ADS8688 is not set
CONFIG_TI_ADS124S08=y
# CONFIG_TI_ADS131E08 is not set
# CONFIG_TI_AM335X_ADC is not set
CONFIG_TI_TLC4541=m
# CONFIG_TI_TSC2046 is not set
CONFIG_TWL4030_MADC=y
# CONFIG_TWL6030_GPADC is not set
# CONFIG_VF610_ADC is not set
CONFIG_XILINX_XADC=m
# CONFIG_XILINX_AMS is not set
# end of Analog to digital converters
#
# Analog to digital and digital to analog converters
#
# CONFIG_AD74413R is not set
# end of Analog to digital and digital to analog converters
#
# Analog Front Ends
#
CONFIG_IIO_RESCALE=m
# end of Analog Front Ends
#
# Amplifiers
#
CONFIG_AD8366=y
# CONFIG_ADA4250 is not set
CONFIG_HMC425=m
# end of Amplifiers
#
# Capacitance to digital converters
#
# CONFIG_AD7150 is not set
# end of Capacitance to digital converters
#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=m
# CONFIG_ATLAS_EZO_SENSOR is not set
# CONFIG_BME680 is not set
CONFIG_CCS811=m
CONFIG_IAQCORE=m
# CONFIG_SCD30_CORE is not set
# CONFIG_SCD4X is not set
# CONFIG_SENSIRION_SGP30 is not set
# CONFIG_SENSIRION_SGP40 is not set
# CONFIG_SPS30_I2C is not set
# CONFIG_SENSEAIR_SUNRISE_CO2 is not set
CONFIG_VZ89X=m
# end of Chemical Sensors
#
# Hid Sensor IIO Common
#
# end of Hid Sensor IIO Common
CONFIG_IIO_MS_SENSORS_I2C=y
#
# IIO SCMI Sensors
#
# end of IIO SCMI Sensors
#
# SSP Sensor Common
#
# CONFIG_IIO_SSP_SENSORS_COMMONS is not set
CONFIG_IIO_SSP_SENSORHUB=m
# end of SSP Sensor Common
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_SPI=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Digital to analog converters
#
# CONFIG_AD3552R is not set
CONFIG_AD5064=m
CONFIG_AD5360=y
CONFIG_AD5380=y
CONFIG_AD5421=m
CONFIG_AD5446=m
CONFIG_AD5449=y
CONFIG_AD5592R_BASE=y
# CONFIG_AD5592R is not set
CONFIG_AD5593R=y
# CONFIG_AD5504 is not set
# CONFIG_AD5624R_SPI is not set
# CONFIG_LTC2688 is not set
CONFIG_AD5686=m
CONFIG_AD5686_SPI=m
# CONFIG_AD5696_I2C is not set
# CONFIG_AD5755 is not set
CONFIG_AD5758=m
# CONFIG_AD5761 is not set
# CONFIG_AD5764 is not set
# CONFIG_AD5766 is not set
CONFIG_AD5770R=m
CONFIG_AD5791=y
# CONFIG_AD7293 is not set
CONFIG_AD7303=m
CONFIG_AD8801=m
CONFIG_DPOT_DAC=y
# CONFIG_DS4424 is not set
CONFIG_LPC18XX_DAC=m
CONFIG_LTC1660=m
# CONFIG_LTC2632 is not set
# CONFIG_M62332 is not set
# CONFIG_MAX517 is not set
CONFIG_MAX5821=y
# CONFIG_MCP4725 is not set
CONFIG_MCP4922=m
# CONFIG_STM32_DAC is not set
# CONFIG_TI_DAC082S085 is not set
CONFIG_TI_DAC5571=y
CONFIG_TI_DAC7311=m
CONFIG_TI_DAC7612=m
CONFIG_VF610_DAC=y
# end of Digital to analog converters
#
# IIO dummy driver
#
# CONFIG_IIO_SIMPLE_DUMMY is not set
# end of IIO dummy driver
#
# Filters
#
# CONFIG_ADMV8818 is not set
# end of Filters
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
CONFIG_AD9523=y
# end of Clock Generator/Distribution
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=m
CONFIG_ADF4371=y
# CONFIG_ADMV1013 is not set
# CONFIG_ADMV1014 is not set
# CONFIG_ADMV4420 is not set
# CONFIG_ADRF6780 is not set
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL
#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=m
# CONFIG_ADIS16130 is not set
CONFIG_ADIS16136=m
# CONFIG_ADIS16260 is not set
CONFIG_ADXRS290=y
CONFIG_ADXRS450=m
CONFIG_BMG160=m
CONFIG_BMG160_I2C=m
CONFIG_BMG160_SPI=m
CONFIG_FXAS21002C=y
CONFIG_FXAS21002C_I2C=y
CONFIG_FXAS21002C_SPI=y
# CONFIG_MPU3050_I2C is not set
CONFIG_IIO_ST_GYRO_3AXIS=m
CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
CONFIG_IIO_ST_GYRO_SPI_3AXIS=m
# CONFIG_ITG3200 is not set
# end of Digital gyroscope sensors
#
# Health Sensors
#
#
# Heart Rate Monitors
#
CONFIG_AFE4403=m
CONFIG_AFE4404=y
CONFIG_MAX30100=y
CONFIG_MAX30102=m
# end of Heart Rate Monitors
# end of Health Sensors
#
# Humidity sensors
#
# CONFIG_AM2315 is not set
# CONFIG_DHT11 is not set
# CONFIG_HDC100X is not set
# CONFIG_HDC2010 is not set
CONFIG_HTS221=m
CONFIG_HTS221_I2C=m
CONFIG_HTS221_SPI=m
CONFIG_HTU21=m
CONFIG_SI7005=m
CONFIG_SI7020=y
# end of Humidity sensors
#
# Inertial measurement units
#
# CONFIG_ADIS16400 is not set
# CONFIG_ADIS16460 is not set
# CONFIG_ADIS16475 is not set
CONFIG_ADIS16480=y
CONFIG_BMI160=y
CONFIG_BMI160_I2C=y
CONFIG_BMI160_SPI=m
CONFIG_FXOS8700=m
CONFIG_FXOS8700_I2C=m
CONFIG_FXOS8700_SPI=m
# CONFIG_KMX61 is not set
CONFIG_INV_ICM42600=y
CONFIG_INV_ICM42600_I2C=m
CONFIG_INV_ICM42600_SPI=y
CONFIG_INV_MPU6050_IIO=y
CONFIG_INV_MPU6050_I2C=y
CONFIG_INV_MPU6050_SPI=m
CONFIG_IIO_ST_LSM6DSX=m
CONFIG_IIO_ST_LSM6DSX_I2C=m
CONFIG_IIO_ST_LSM6DSX_SPI=m
# CONFIG_IIO_ST_LSM9DS0 is not set
# end of Inertial measurement units
CONFIG_IIO_ADIS_LIB=y
CONFIG_IIO_ADIS_LIB_BUFFER=y
#
# Light sensors
#
CONFIG_ADJD_S311=m
CONFIG_ADUX1020=y
CONFIG_AL3010=m
CONFIG_AL3320A=m
CONFIG_APDS9300=m
CONFIG_APDS9960=m
CONFIG_AS73211=y
CONFIG_BH1750=y
# CONFIG_BH1780 is not set
CONFIG_CM32181=y
CONFIG_CM3232=y
CONFIG_CM3323=y
CONFIG_CM3605=m
CONFIG_CM36651=m
CONFIG_GP2AP002=y
# CONFIG_GP2AP020A00F is not set
CONFIG_IQS621_ALS=y
CONFIG_SENSORS_ISL29018=y
# CONFIG_SENSORS_ISL29028 is not set
CONFIG_ISL29125=m
# CONFIG_JSA1212 is not set
# CONFIG_RPR0521 is not set
CONFIG_LTR501=m
CONFIG_LV0104CS=y
CONFIG_MAX44000=y
# CONFIG_MAX44009 is not set
CONFIG_NOA1305=y
# CONFIG_OPT3001 is not set
CONFIG_PA12203001=y
CONFIG_SI1133=y
CONFIG_SI1145=y
# CONFIG_STK3310 is not set
# CONFIG_ST_UVIS25 is not set
CONFIG_TCS3414=y
# CONFIG_TCS3472 is not set
CONFIG_SENSORS_TSL2563=m
# CONFIG_TSL2583 is not set
# CONFIG_TSL2591 is not set
CONFIG_TSL2772=y
# CONFIG_TSL4531 is not set
# CONFIG_US5182D is not set
# CONFIG_VCNL4000 is not set
# CONFIG_VCNL4035 is not set
CONFIG_VEML6030=m
CONFIG_VEML6070=y
# CONFIG_VL6180 is not set
# CONFIG_ZOPT2201 is not set
# end of Light sensors
#
# Magnetometer sensors
#
CONFIG_AK8974=y
# CONFIG_AK8975 is not set
# CONFIG_AK09911 is not set
CONFIG_BMC150_MAGN=m
CONFIG_BMC150_MAGN_I2C=m
# CONFIG_BMC150_MAGN_SPI is not set
CONFIG_MAG3110=y
CONFIG_MMC35240=m
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
CONFIG_IIO_ST_MAGN_SPI_3AXIS=y
CONFIG_SENSORS_HMC5843=m
CONFIG_SENSORS_HMC5843_I2C=m
# CONFIG_SENSORS_HMC5843_SPI is not set
CONFIG_SENSORS_RM3100=m
# CONFIG_SENSORS_RM3100_I2C is not set
CONFIG_SENSORS_RM3100_SPI=m
# CONFIG_YAMAHA_YAS530 is not set
# end of Magnetometer sensors
#
# Multiplexers
#
# CONFIG_IIO_MUX is not set
# end of Multiplexers
#
# Inclinometer sensors
#
# end of Inclinometer sensors
# CONFIG_IIO_RESCALE_KUNIT_TEST is not set
# CONFIG_IIO_FORMAT_KUNIT_TEST is not set
#
# Triggers - standalone
#
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
CONFIG_IIO_STM32_LPTIMER_TRIGGER=m
# CONFIG_IIO_STM32_TIMER_TRIGGER is not set
CONFIG_IIO_SYSFS_TRIGGER=m
# end of Triggers - standalone
#
# Linear and angular position sensors
#
CONFIG_IQS624_POS=m
# end of Linear and angular position sensors
#
# Digital potentiometers
#
# CONFIG_AD5110 is not set
# CONFIG_AD5272 is not set
# CONFIG_DS1803 is not set
CONFIG_MAX5432=m
CONFIG_MAX5481=y
# CONFIG_MAX5487 is not set
CONFIG_MCP4018=m
# CONFIG_MCP4131 is not set
CONFIG_MCP4531=m
# CONFIG_MCP41010 is not set
CONFIG_TPL0102=m
# end of Digital potentiometers
#
# Digital potentiostats
#
CONFIG_LMP91000=m
# end of Digital potentiostats
#
# Pressure sensors
#
# CONFIG_ABP060MG is not set
CONFIG_BMP280=y
CONFIG_BMP280_I2C=y
CONFIG_BMP280_SPI=y
CONFIG_DLHL60D=m
# CONFIG_DPS310 is not set
# CONFIG_HP03 is not set
# CONFIG_ICP10100 is not set
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
CONFIG_MPL115_SPI=y
CONFIG_MPL3115=y
CONFIG_MS5611=y
CONFIG_MS5611_I2C=m
# CONFIG_MS5611_SPI is not set
CONFIG_MS5637=m
# CONFIG_IIO_ST_PRESS is not set
CONFIG_T5403=y
# CONFIG_HP206C is not set
# CONFIG_ZPA2326 is not set
# end of Pressure sensors
#
# Lightning sensors
#
CONFIG_AS3935=m
# end of Lightning sensors
#
# Proximity and distance sensors
#
# CONFIG_ISL29501 is not set
CONFIG_LIDAR_LITE_V2=y
CONFIG_MB1232=m
CONFIG_PING=m
CONFIG_RFD77402=y
# CONFIG_SRF04 is not set
CONFIG_SX_COMMON=y
CONFIG_SX9310=y
# CONFIG_SX9324 is not set
# CONFIG_SX9360 is not set
# CONFIG_SX9500 is not set
# CONFIG_SRF08 is not set
CONFIG_VCNL3020=m
# CONFIG_VL53L0X_I2C is not set
# end of Proximity and distance sensors
#
# Resolver to digital converters
#
# CONFIG_AD2S90 is not set
CONFIG_AD2S1200=y
# end of Resolver to digital converters
#
# Temperature sensors
#
CONFIG_IQS620AT_TEMP=m
# CONFIG_LTC2983 is not set
CONFIG_MAXIM_THERMOCOUPLE=y
CONFIG_MLX90614=y
CONFIG_MLX90632=m
# CONFIG_TMP006 is not set
# CONFIG_TMP007 is not set
# CONFIG_TMP117 is not set
CONFIG_TSYS01=y
CONFIG_TSYS02D=m
# CONFIG_MAX31856 is not set
# CONFIG_MAX31865 is not set
# end of Temperature sensors
CONFIG_NTB=m
CONFIG_NTB_MSI=y
CONFIG_NTB_IDT=m
# CONFIG_NTB_EPF is not set
CONFIG_NTB_SWITCHTEC=m
CONFIG_NTB_PINGPONG=m
# CONFIG_NTB_TOOL is not set
CONFIG_NTB_PERF=m
CONFIG_NTB_MSI_TEST=m
CONFIG_NTB_TRANSPORT=m
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_ATMEL=m
CONFIG_PWM_ATMEL_HLCDC_PWM=m
# CONFIG_PWM_ATMEL_TCB is not set
# CONFIG_PWM_BCM_IPROC is not set
CONFIG_PWM_BCM_KONA=y
# CONFIG_PWM_BCM2835 is not set
CONFIG_PWM_BERLIN=m
# CONFIG_PWM_BRCMSTB is not set
# CONFIG_PWM_CLK is not set
CONFIG_PWM_CLPS711X=y
# CONFIG_PWM_DWC is not set
CONFIG_PWM_EP93XX=y
CONFIG_PWM_FSL_FTM=m
CONFIG_PWM_HIBVT=m
CONFIG_PWM_IMG=y
# CONFIG_PWM_IMX1 is not set
CONFIG_PWM_IMX27=y
CONFIG_PWM_IMX_TPM=y
# CONFIG_PWM_INTEL_LGM is not set
# CONFIG_PWM_IQS620A is not set
# CONFIG_PWM_JZ4740 is not set
# CONFIG_PWM_KEEMBAY is not set
CONFIG_PWM_LP3943=m
# CONFIG_PWM_LPC18XX_SCT is not set
CONFIG_PWM_LPC32XX=m
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
CONFIG_PWM_MESON=m
CONFIG_PWM_MTK_DISP=m
CONFIG_PWM_MEDIATEK=m
CONFIG_PWM_MXS=y
CONFIG_PWM_OMAP_DMTIMER=m
# CONFIG_PWM_PCA9685 is not set
# CONFIG_PWM_PXA is not set
# CONFIG_PWM_RASPBERRYPI_POE is not set
CONFIG_PWM_RCAR=m
CONFIG_PWM_RENESAS_TPU=y
CONFIG_PWM_ROCKCHIP=m
# CONFIG_PWM_SAMSUNG is not set
CONFIG_PWM_SIFIVE=m
CONFIG_PWM_SL28CPLD=m
# CONFIG_PWM_SPEAR is not set
CONFIG_PWM_SPRD=y
CONFIG_PWM_STI=y
CONFIG_PWM_STM32=y
CONFIG_PWM_STM32_LP=y
# CONFIG_PWM_STMPE is not set
CONFIG_PWM_SUN4I=m
# CONFIG_PWM_SUNPLUS is not set
# CONFIG_PWM_TEGRA is not set
CONFIG_PWM_TIECAP=m
# CONFIG_PWM_TIEHRPWM is not set
CONFIG_PWM_TWL=m
# CONFIG_PWM_TWL_LED is not set
# CONFIG_PWM_VISCONTI is not set
CONFIG_PWM_VT8500=y
# CONFIG_PWM_XILINX is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_AL_FIC=y
CONFIG_JCORE_AIC=y
# CONFIG_RENESAS_INTC_IRQPIN is not set
# CONFIG_RENESAS_IRQC is not set
# CONFIG_RENESAS_RZA1_IRQC is not set
# CONFIG_RENESAS_RZG2L_IRQC is not set
CONFIG_SL28CPLD_INTC=y
CONFIG_TS4800_IRQ=y
# CONFIG_XILINX_INTC is not set
# CONFIG_INGENIC_TCU_IRQ is not set
# CONFIG_IRQ_UNIPHIER_AIDET is not set
# CONFIG_MESON_IRQ_GPIO is not set
CONFIG_IMX_IRQSTEER=y
# CONFIG_IMX_INTMUX is not set
CONFIG_RISCV_INTC=y
CONFIG_SIFIVE_PLIC=y
# CONFIG_EXYNOS_IRQ_COMBINER is not set
# CONFIG_MST_IRQ is not set
# CONFIG_MCHP_EIC is not set
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_A10SR is not set
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_AXS10X is not set
# CONFIG_RESET_BCM6345 is not set
CONFIG_RESET_BERLIN=y
# CONFIG_RESET_BRCMSTB is not set
CONFIG_RESET_BRCMSTB_RESCAL=y
CONFIG_RESET_HSDK=y
CONFIG_RESET_IMX7=m
# CONFIG_RESET_INTEL_GW is not set
# CONFIG_RESET_K210 is not set
# CONFIG_RESET_LANTIQ is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MCHP_SPARX5 is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_MESON_AUDIO_ARB is not set
# CONFIG_RESET_NPCM is not set
CONFIG_RESET_PISTACHIO=y
# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_QCOM_PDC is not set
CONFIG_RESET_RASPBERRYPI=y
# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
CONFIG_RESET_SCMI=m
CONFIG_RESET_SIMPLE=y
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STARFIVE_JH7100 is not set
# CONFIG_RESET_SUNPLUS is not set
CONFIG_RESET_SUNXI=y
# CONFIG_RESET_TI_SCI is not set
# CONFIG_RESET_TI_SYSCON is not set
# CONFIG_RESET_TI_TPS380X is not set
# CONFIG_RESET_TN48M_CPLD is not set
CONFIG_RESET_UNIPHIER=y
CONFIG_RESET_UNIPHIER_GLUE=y
# CONFIG_RESET_ZYNQ is not set
CONFIG_COMMON_RESET_HI3660=y
CONFIG_COMMON_RESET_HI6220=m
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_PHY_LPC18XX_USB_OTG=m
# CONFIG_PHY_PISTACHIO_USB is not set
# CONFIG_PHY_XGENE is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set
# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
# CONFIG_PHY_SUN50I_USB3 is not set
# CONFIG_PHY_MESON8_HDMI_TX is not set
# CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG is not set
# CONFIG_PHY_MESON_G12A_USB2 is not set
CONFIG_PHY_MESON_G12A_USB3_PCIE=m
CONFIG_PHY_MESON_AXG_PCIE=y
# CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG is not set
# CONFIG_PHY_MESON_AXG_MIPI_DPHY is not set
#
# PHY drivers for Broadcom platforms
#
# CONFIG_PHY_BCM63XX_USBH is not set
CONFIG_PHY_CYGNUS_PCIE=m
CONFIG_PHY_BCM_SR_USB=m
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_PHY_BCM_NS_USB2=m
# CONFIG_PHY_BCM_NS_USB3 is not set
# CONFIG_PHY_NS2_PCIE is not set
CONFIG_PHY_NS2_USB_DRD=y
# CONFIG_PHY_BRCM_SATA is not set
CONFIG_PHY_BRCM_USB=y
CONFIG_PHY_BCM_SR_PCIE=m
# end of PHY drivers for Broadcom platforms
# CONFIG_PHY_CADENCE_TORRENT is not set
CONFIG_PHY_CADENCE_DPHY=y
# CONFIG_PHY_CADENCE_DPHY_RX is not set
CONFIG_PHY_CADENCE_SIERRA=y
CONFIG_PHY_CADENCE_SALVO=y
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_PHY_MIXEL_LVDS_PHY is not set
CONFIG_PHY_MIXEL_MIPI_DPHY=m
# CONFIG_PHY_FSL_IMX8M_PCIE is not set
# CONFIG_PHY_FSL_LYNX_28G is not set
CONFIG_PHY_HI6220_USB=y
CONFIG_PHY_HI3660_USB=y
# CONFIG_PHY_HI3670_USB is not set
# CONFIG_PHY_HI3670_PCIE is not set
CONFIG_PHY_HISTB_COMBPHY=m
CONFIG_PHY_HISI_INNO_USB2=y
CONFIG_PHY_LANTIQ_VRX200_PCIE=y
CONFIG_PHY_LANTIQ_RCU_USB2=m
# CONFIG_ARMADA375_USBCLUSTER_PHY is not set
# CONFIG_PHY_BERLIN_SATA is not set
CONFIG_PHY_BERLIN_USB=y
CONFIG_PHY_MVEBU_A3700_UTMI=y
CONFIG_PHY_MVEBU_A38X_COMPHY=m
CONFIG_PHY_PXA_28NM_HSIC=m
CONFIG_PHY_PXA_28NM_USB2=m
CONFIG_PHY_PXA_USB=y
# CONFIG_PHY_MMP3_USB is not set
# CONFIG_PHY_MMP3_HSIC is not set
# CONFIG_PHY_MTK_PCIE is not set
CONFIG_PHY_MTK_TPHY=m
# CONFIG_PHY_MTK_UFS is not set
CONFIG_PHY_MTK_XSPHY=y
CONFIG_PHY_MTK_HDMI=y
# CONFIG_PHY_MTK_MIPI_DSI is not set
# CONFIG_PHY_MTK_DP is not set
# CONFIG_PHY_SPARX5_SERDES is not set
# CONFIG_PHY_LAN966X_SERDES is not set
# CONFIG_PHY_OCELOT_SERDES is not set
CONFIG_PHY_ATH79_USB=m
# CONFIG_PHY_QCOM_EDP is not set
CONFIG_PHY_QCOM_IPQ4019_USB=m
CONFIG_PHY_QCOM_PCIE2=y
CONFIG_PHY_QCOM_QMP=m
CONFIG_PHY_QCOM_QUSB2=m
CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y
CONFIG_PHY_QCOM_USB_HS_28NM=y
CONFIG_PHY_QCOM_USB_SS=y
CONFIG_PHY_QCOM_IPQ806X_USB=m
# CONFIG_PHY_MT7621_PCI is not set
CONFIG_PHY_RALINK_USB=y
CONFIG_PHY_RCAR_GEN3_USB3=m
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
CONFIG_PHY_ROCKCHIP_INNO_HDMI=y
# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
CONFIG_PHY_EXYNOS_DP_VIDEO=m
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
# CONFIG_PHY_EXYNOS_PCIE is not set
# CONFIG_PHY_SAMSUNG_UFS is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB2 is not set
CONFIG_PHY_UNIPHIER_USB3=m
CONFIG_PHY_UNIPHIER_PCIE=m
# CONFIG_PHY_UNIPHIER_AHCI is not set
CONFIG_PHY_ST_SPEAR1310_MIPHY=y
CONFIG_PHY_ST_SPEAR1340_MIPHY=y
# CONFIG_PHY_STIH407_USB is not set
# CONFIG_PHY_STM32_USBPHYC is not set
CONFIG_PHY_TEGRA194_P2U=y
# CONFIG_PHY_DA8XX_USB is not set
# CONFIG_PHY_AM654_SERDES is not set
CONFIG_PHY_J721E_WIZ=m
CONFIG_OMAP_CONTROL_PHY=y
CONFIG_TI_PIPE3=y
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
# CONFIG_PHY_INTEL_KEEMBAY_USB is not set
CONFIG_PHY_INTEL_LGM_COMBO=y
CONFIG_PHY_INTEL_LGM_EMMC=m
# CONFIG_PHY_INTEL_THUNDERBAY_EMMC is not set
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# CONFIG_ARM_CCN is not set
# CONFIG_ARM_CMN is not set
CONFIG_RISCV_PMU=y
CONFIG_RISCV_PMU_LEGACY=y
CONFIG_RISCV_PMU_SBI=y
# CONFIG_ARM_SMMU_V3_PMU is not set
# CONFIG_FSL_IMX8_DDR_PMU is not set
# CONFIG_XGENE_PMU is not set
# CONFIG_ARM_DMC620_PMU is not set
# CONFIG_MARVELL_CN10K_TAD_PMU is not set
# CONFIG_HNS3_PMU is not set
# CONFIG_MARVELL_CN10K_DDR_PMU is not set
# end of Performance monitor support
# CONFIG_RAS is not set
CONFIG_USB4=y
# CONFIG_USB4_DEBUGFS_WRITE is not set
# CONFIG_USB4_DMA_TEST is not set
#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android
# CONFIG_DAX is not set
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_IMX_IIM is not set
CONFIG_NVMEM_IMX_OCOTP=m
# CONFIG_JZ4780_EFUSE is not set
CONFIG_NVMEM_LPC18XX_EEPROM=m
CONFIG_NVMEM_LPC18XX_OTP=m
CONFIG_NVMEM_MXS_OCOTP=m
# CONFIG_MTK_EFUSE is not set
# CONFIG_MICROCHIP_OTPC is not set
# CONFIG_NVMEM_NINTENDO_OTP is not set
# CONFIG_QCOM_QFPROM is not set
# CONFIG_NVMEM_SPMI_SDAM is not set
# CONFIG_ROCKCHIP_EFUSE is not set
# CONFIG_ROCKCHIP_OTP is not set
CONFIG_NVMEM_BCM_OCOTP=y
CONFIG_NVMEM_STM32_ROMEM=m
# CONFIG_UNIPHIER_EFUSE is not set
# CONFIG_NVMEM_VF610_OCOTP is not set
# CONFIG_MESON_MX_EFUSE is not set
CONFIG_NVMEM_SNVS_LPGPR=y
# CONFIG_SC27XX_EFUSE is not set
# CONFIG_SPRD_EFUSE is not set
# CONFIG_NVMEM_RMEM is not set
# CONFIG_NVMEM_BRCM_NVRAM is not set
# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
# CONFIG_NVMEM_SUNPLUS_OCOTP is not set
# CONFIG_NVMEM_APPLE_EFUSES is not set
#
# HW tracing support
#
CONFIG_STM=y
CONFIG_STM_PROTO_BASIC=y
# CONFIG_STM_PROTO_SYS_T is not set
CONFIG_STM_DUMMY=m
# CONFIG_STM_SOURCE_CONSOLE is not set
# CONFIG_STM_SOURCE_HEARTBEAT is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support
# CONFIG_FPGA is not set
CONFIG_FSI=m
CONFIG_FSI_NEW_DEV_NODE=y
CONFIG_FSI_MASTER_GPIO=m
# CONFIG_FSI_MASTER_HUB is not set
CONFIG_FSI_MASTER_AST_CF=m
CONFIG_FSI_MASTER_ASPEED=m
CONFIG_FSI_SCOM=m
CONFIG_FSI_SBEFIFO=m
CONFIG_FSI_OCC=m
# CONFIG_TEE is not set
CONFIG_MULTIPLEXER=y
#
# Multiplexer drivers
#
# CONFIG_MUX_ADG792A is not set
# CONFIG_MUX_ADGS1408 is not set
# CONFIG_MUX_GPIO is not set
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers
CONFIG_PM_OPP=y
CONFIG_SIOX=m
CONFIG_SIOX_BUS_GPIO=m
# CONFIG_SLIMBUS is not set
CONFIG_INTERCONNECT=y
# CONFIG_INTERCONNECT_IMX is not set
# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
# CONFIG_INTERCONNECT_SAMSUNG is not set
CONFIG_COUNTER=m
# CONFIG_104_QUAD_8 is not set
# CONFIG_INTERRUPT_CNT is not set
CONFIG_STM32_TIMER_CNT=m
CONFIG_STM32_LPTIMER_CNT=m
CONFIG_TI_EQEP=m
# CONFIG_FTM_QUADDEC is not set
CONFIG_MICROCHIP_TCB_CAPTURE=m
# CONFIG_INTEL_QEP is not set
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers
#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=m
# CONFIG_XFS_SUPPORT_V4 is not set
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_ONLINE_SCRUB is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
# CONFIG_BTRFS_FS_POSIX_ACL is not set
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y
CONFIG_BTRFS_DEBUG=y
CONFIG_BTRFS_ASSERT=y
CONFIG_BTRFS_FS_REF_VERIFY=y
CONFIG_NILFS2_FS=y
# CONFIG_F2FS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
CONFIG_FS_VERITY=y
# CONFIG_FS_VERITY_DEBUG is not set
CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_AUTOFS_FS=m
# CONFIG_FUSE_FS is not set
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
CONFIG_OVERLAY_FS_INDEX=y
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
CONFIG_OVERLAY_FS_METACOPY=y
#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_FAT_KUNIT_TEST is not set
CONFIG_EXFAT_FS=m
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_INODE64 is not set
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
# CONFIG_HUGETLBFS is not set
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=m
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
CONFIG_ADFS_FS=m
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=y
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
CONFIG_HFS_FS=y
# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=m
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=y
CONFIG_EFS_FS=m
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=m
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
CONFIG_EROFS_FS=m
CONFIG_EROFS_FS_DEBUG=y
CONFIG_EROFS_FS_XATTR=y
# CONFIG_EROFS_FS_POSIX_ACL is not set
# CONFIG_EROFS_FS_SECURITY is not set
# CONFIG_EROFS_FS_ZIP is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=y
# CONFIG_NLS_MAC_CROATIAN is not set
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=m
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
# CONFIG_NLS_UTF8 is not set
CONFIG_DLM=y
# CONFIG_DLM_DEPRECATED_API is not set
# CONFIG_DLM_DEBUG is not set
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_TRUSTED_KEYS_TPM=y
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEY_DH_OPERATIONS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
# CONFIG_FORTIFY_SOURCE is not set
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
# CONFIG_SECURITY_SMACK is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set
CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init"
CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init"
# CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
# CONFIG_IMA_NG_TEMPLATE is not set
CONFIG_IMA_SIG_TEMPLATE=y
CONFIG_IMA_DEFAULT_TEMPLATE="ima-sig"
# CONFIG_IMA_DEFAULT_HASH_SHA1 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
CONFIG_IMA_DEFAULT_HASH_SM3=y
CONFIG_IMA_DEFAULT_HASH="sm3"
# CONFIG_IMA_WRITE_POLICY is not set
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
# CONFIG_IMA_APPRAISE_BOOTPARAM is not set
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
# CONFIG_IMA_DISABLE_HTABLE is not set
# CONFIG_EVM is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
CONFIG_INIT_STACK_ALL_PATTERN=y
# CONFIG_INIT_STACK_ALL_ZERO is not set
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_FIPS_NAME="Linux Kernel Cryptographic API"
# CONFIG_CRYPTO_FIPS_CUSTOM_VERSION is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ENGINE=y
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECDSA is not set
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_SM2=m
CONFIG_CRYPTO_CURVE25519=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
# CONFIG_CRYPTO_AEGIS128 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_OFB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=y
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_HCTR2 is not set
# CONFIG_CRYPTO_ESSIV is not set
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_XXHASH=m
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_CRC64_ROCKSOFT is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_SM3=y
# CONFIG_CRYPTO_SM3_GENERIC is not set
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_CHACHA20=y
# CONFIG_CRYPTO_ARIA is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SM4=y
# CONFIG_CRYPTO_SM4_GENERIC is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
CONFIG_CRYPTO_LZ4HC=m
# CONFIG_CRYPTO_ZSTD is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_KDF800108_CTR=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_USER_API_RNG_CAVP=y
CONFIG_CRYPTO_USER_API_AEAD=m
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
CONFIG_CRYPTO_STATS=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_ALLWINNER=y
CONFIG_CRYPTO_DEV_SUN8I_CE=y
# CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG is not set
# CONFIG_CRYPTO_DEV_SUN8I_CE_HASH is not set
CONFIG_CRYPTO_DEV_SUN8I_CE_PRNG=y
# CONFIG_CRYPTO_DEV_SUN8I_CE_TRNG is not set
CONFIG_CRYPTO_DEV_SUN8I_SS=y
CONFIG_CRYPTO_DEV_SUN8I_SS_DEBUG=y
# CONFIG_CRYPTO_DEV_SUN8I_SS_PRNG is not set
CONFIG_CRYPTO_DEV_SUN8I_SS_HASH=y
# CONFIG_CRYPTO_DEV_SL3516 is not set
# CONFIG_CRYPTO_DEV_EXYNOS_RNG is not set
# CONFIG_CRYPTO_DEV_S5P is not set
# CONFIG_CRYPTO_DEV_ATMEL_AES is not set
CONFIG_CRYPTO_DEV_ATMEL_TDES=y
CONFIG_CRYPTO_DEV_ATMEL_SHA=y
CONFIG_CRYPTO_DEV_ATMEL_I2C=y
CONFIG_CRYPTO_DEV_ATMEL_ECC=m
CONFIG_CRYPTO_DEV_ATMEL_SHA204A=y
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_4XXX is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CAVIUM_CPT is not set
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
# CONFIG_CRYPTO_DEV_OCTEONTX_CPT is not set
# CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set
CONFIG_CRYPTO_DEV_QCE=m
CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y
# CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL is not set
CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER=y
# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set
# CONFIG_CRYPTO_DEV_QCE_ENABLE_AEAD is not set
CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512
CONFIG_CRYPTO_DEV_QCOM_RNG=m
CONFIG_CRYPTO_DEV_IMGTEC_HASH=y
CONFIG_CRYPTO_DEV_ZYNQMP_AES=y
# CONFIG_CRYPTO_DEV_ZYNQMP_SHA3 is not set
# CONFIG_CRYPTO_DEV_VIRTIO is not set
CONFIG_CRYPTO_DEV_SAFEXCEL=m
CONFIG_CRYPTO_DEV_CCREE=y
CONFIG_CRYPTO_DEV_HISI_SEC=y
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
# CONFIG_CRYPTO_DEV_SA2UL is not set
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 is not set
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_ECC is not set
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_HCU is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=y
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set
#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
# CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
CONFIG_SECONDARY_TRUSTED_KEYRING=y
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
# CONFIG_RAID6_PQ_BENCHMARK is not set
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=m
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_STMP_DEVICE=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_LIB_MEMNEQ=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
# CONFIG_CRC64_ROCKSOFT is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=m
CONFIG_CRC4=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=m
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=m
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=m
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC16=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_RESTRICTED_POOL is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
CONFIG_SG_SPLIT=y
CONFIG_SG_POOL=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
CONFIG_PARMAN=m
# CONFIG_OBJAGG is not set
# end of Library routines
CONFIG_GENERIC_IOREMAP=y
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
CONFIG_PLDMFW=y
CONFIG_ASN1_ENCODER=y
CONFIG_POLYNOMIAL=m
#
# Kernel hacking
#
#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options
# CONFIG_DEBUG_KERNEL is not set
#
# Compile-time checks and compiler options
#
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
CONFIG_HEADERS_INSTALL=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
# CONFIG_MAGIC_SYSRQ_SERIAL is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_FS_ALLOW_ALL is not set
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
CONFIG_DEBUG_FS_ALLOW_NONE=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KGDB_QXFER_PKT=y
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ONLY_BOUNDS=y
CONFIG_UBSAN_SHIFT=y
# CONFIG_UBSAN_DIV_ZERO is not set
# CONFIG_UBSAN_UNREACHABLE is not set
CONFIG_UBSAN_BOOL=y
CONFIG_UBSAN_ENUM=y
CONFIG_UBSAN_SANITIZE_ALL=y
CONFIG_TEST_UBSAN=m
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_PAGE_TABLE_CHECK is not set
CONFIG_PAGE_POISONING=y
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging
#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_TEST_LOCKUP=m
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_WW_MUTEX_SELFTEST=m
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
#
# Debug kernel data structures
#
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures
#
# RCU Debugging
#
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
# end of RCU Debugging
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
# CONFIG_STRICT_DEVMEM is not set
#
# riscv Debugging
#
# end of riscv Debugging
#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=m
CONFIG_KUNIT_DEBUGFS=y
# CONFIG_KUNIT_TEST is not set
CONFIG_KUNIT_EXAMPLE_TEST=m
# CONFIG_KUNIT_ALL_TESTS is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_KCOV=y
# CONFIG_KCOV_ENABLE_COMPARISONS is not set
CONFIG_KCOV_INSTRUMENT_ALL=y
CONFIG_KCOV_IRQ_AREA_SIZE=0x40000
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_LKDTM is not set
# CONFIG_TEST_CPUMASK is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_MIN_HEAP is not set
CONFIG_TEST_SORT=m
# CONFIG_TEST_DIV64 is not set
CONFIG_REED_SOLOMON_TEST=m
CONFIG_ATOMIC64_SELFTEST=m
# CONFIG_TEST_HEXDUMP is not set
CONFIG_STRING_SELFTEST=y
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_STRSCPY=y
CONFIG_TEST_KSTRTOX=y
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_SCANF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
CONFIG_TEST_XARRAY=m
CONFIG_TEST_RHASHTABLE=y
# CONFIG_TEST_SIPHASH is not set
CONFIG_TEST_IDA=y
CONFIG_TEST_PARMAN=m
CONFIG_TEST_LKM=m
CONFIG_TEST_BITOPS=m
CONFIG_TEST_VMALLOC=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_BLACKHOLE_DEV=m
CONFIG_FIND_BIT_BENCHMARK=m
# CONFIG_TEST_FIRMWARE is not set
CONFIG_TEST_SYSCTL=y
# CONFIG_BITFIELD_KUNIT is not set
# CONFIG_HASH_KUNIT_TEST is not set
# CONFIG_RESOURCE_KUNIT_TEST is not set
# CONFIG_SYSCTL_KUNIT_TEST is not set
# CONFIG_LIST_KUNIT_TEST is not set
CONFIG_LINEAR_RANGES_TEST=m
# CONFIG_CMDLINE_KUNIT_TEST is not set
CONFIG_BITS_TEST=m
# CONFIG_SLUB_KUNIT_TEST is not set
# CONFIG_RATIONAL_KUNIT_TEST is not set
# CONFIG_MEMCPY_KUNIT_TEST is not set
# CONFIG_OVERFLOW_KUNIT_TEST is not set
# CONFIG_STACKINIT_KUNIT_TEST is not set
CONFIG_TEST_UDELAY=y
# CONFIG_TEST_STATIC_KEYS is not set
CONFIG_TEST_KMOD=m
CONFIG_TEST_MEMCAT_P=m
# CONFIG_TEST_MEMINIT is not set
CONFIG_TEST_FREE_PAGES=y
CONFIG_ARCH_USE_MEMTEST=y
CONFIG_MEMTEST=y
# end of Kernel Testing and Coverage
# CONFIG_WARN_MISSING_DOCUMENTS is not set
# CONFIG_WARN_ABI_ERRORS is not set
# end of Kernel hacking
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 3/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
@ 2022-09-02 6:54 kernel test robot
0 siblings, 0 replies; 29+ messages in thread
From: kernel test robot @ 2022-09-02 6:54 UTC (permalink / raw)
To: kbuild
[-- Attachment #1: Type: text/plain, Size: 15239 bytes --]
::::::
:::::: Manual check reason: "low confidence static check warning: drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Trying to use reserved word 'for' as identifier"
::::::
BCC: lkp(a)intel.com
CC: kbuild-all(a)lists.01.org
In-Reply-To: <20220901110657.3305-4-jslaby@suse.cz>
References: <20220901110657.3305-4-jslaby@suse.cz>
TO: Jiri Slaby <jslaby@suse.cz>
Hi Jiri,
I love your patch! Perhaps something to improve:
[auto build test WARNING on tty/tty-testing]
[also build test WARNING on usb/usb-testing shawnguo/for-next linus/master v6.0-rc3 next-20220901]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Jiri-Slaby/tty-TX-helpers/20220901-190806
base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-testing
:::::: branch date: 20 hours ago
:::::: commit date: 20 hours ago
config: sparc-randconfig-s043-20220901 (https://download.01.org/0day-ci/archive/20220902/202209021457.u7n1jKPI-lkp(a)intel.com/config)
compiler: sparc-linux-gcc (GCC) 12.1.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-39-gce1a6720-dirty
# https://github.com/intel-lab-lkp/linux/commit/f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Jiri-Slaby/tty-TX-helpers/20220901-190806
git checkout f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=sparc SHELL=/bin/bash drivers/tty/serial/
If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got ;
>> drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got &&
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got --
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got ,
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got ->
>> drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got }
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got ,
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got ->
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got }
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got <
>> drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got ==
>> drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got }
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: got }
>> drivers/tty/serial/apbuart.c:130:28: sparse: sparse: too many arguments for function apbuart_do_tx_chars
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: symbol '__raw_writel' redeclared with different type (incompatible argument 1 (different base types)):
>> drivers/tty/serial/apbuart.c:123:8: sparse: int static [signed] [toplevel] __raw_writel( ... )
drivers/tty/serial/apbuart.c: note: in included file (through arch/sparc/include/asm/io_32.h, arch/sparc/include/asm/io.h, include/linux/scatterlist.h, ...):
include/asm-generic/io.h:164:20: sparse: note: previously declared as:
>> include/asm-generic/io.h:164:20: sparse: void static inline [gnu_inline] [toplevel] __raw_writel( ... )
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
>> drivers/tty/serial/apbuart.c:123:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/apbuart.c:123:8: sparse: note: previously declared as:
>> drivers/tty/serial/apbuart.c:123:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: symbol '__raw_writel' redeclared with different type (incompatible argument 1 (different base types)):
>> drivers/tty/serial/apbuart.c:123:8: sparse: int static [signed] [toplevel] __raw_writel( ... )
include/asm-generic/io.h:164:20: sparse: note: previously declared as:
>> include/asm-generic/io.h:164:20: sparse: void static inline [gnu_inline] [toplevel] __raw_writel( ... )
>> drivers/tty/serial/apbuart.c:123:8: sparse: sparse: cannot dereference this type
>> drivers/tty/serial/apbuart.c:123:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/apbuart.c:123:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
>> drivers/tty/serial/apbuart.c:123:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/apbuart.c:123:8: sparse: note: previously declared as:
>> drivers/tty/serial/apbuart.c:123:8: sparse: unsigned int [addressable] [toplevel] pending
>> drivers/tty/serial/apbuart.c:185:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/apbuart.c:198:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/apbuart.c:253:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/apbuart.c:254:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/apbuart.c:338:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/apbuart.c:348:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/apbuart.c:351:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/apbuart.c:362:17: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/apbuart.c:368:9: sparse: sparse: too many arguments for function __raw_writel
vim +/for +123 drivers/tty/serial/apbuart.c
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 122
f6f99189d77ea4 drivers/tty/serial/apbuart.c Jiri Slaby 2022-09-01 @123 static DEFINE_UART_PORT_TX_HELPER_LIMITED(apbuart_do_tx_chars, port, ch,
f6f99189d77ea4 drivers/tty/serial/apbuart.c Jiri Slaby 2022-09-01 124 true,
f6f99189d77ea4 drivers/tty/serial/apbuart.c Jiri Slaby 2022-09-01 125 UART_PUT_CHAR(port, ch),
f6f99189d77ea4 drivers/tty/serial/apbuart.c Jiri Slaby 2022-09-01 126 ({}));
f6f99189d77ea4 drivers/tty/serial/apbuart.c Jiri Slaby 2022-09-01 127
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 128 static void apbuart_tx_chars(struct uart_port *port)
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 129 {
f6f99189d77ea4 drivers/tty/serial/apbuart.c Jiri Slaby 2022-09-01 @130 apbuart_do_tx_chars(port, port->fifosize >> 1);
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 131 }
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 132
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 133 static irqreturn_t apbuart_int(int irq, void *dev_id)
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 134 {
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 135 struct uart_port *port = dev_id;
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 136 unsigned int status;
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 137
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 138 spin_lock(&port->lock);
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 139
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 140 status = UART_GET_STATUS(port);
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 141 if (status & UART_STATUS_DR)
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 142 apbuart_rx_chars(port);
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 143 if (status & UART_STATUS_THE)
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 144 apbuart_tx_chars(port);
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 145
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 146 spin_unlock(&port->lock);
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 147
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 148 return IRQ_HANDLED;
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 149 }
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 150
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 151 static unsigned int apbuart_tx_empty(struct uart_port *port)
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 152 {
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 153 unsigned int status = UART_GET_STATUS(port);
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 154 return status & UART_STATUS_THE ? TIOCSER_TEMT : 0;
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 155 }
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 156
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 157 static unsigned int apbuart_get_mctrl(struct uart_port *port)
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 158 {
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 159 /* The GRLIB APBUART handles flow control in hardware */
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 160 return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 161 }
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 162
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 163 static void apbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 164 {
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 165 /* The GRLIB APBUART handles flow control in hardware */
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 166 }
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 167
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 168 static void apbuart_break_ctl(struct uart_port *port, int break_state)
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 169 {
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 170 /* We don't support sending break */
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 171 }
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 172
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 173 static int apbuart_startup(struct uart_port *port)
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 174 {
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 175 int retval;
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 176 unsigned int cr;
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 177
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 178 /* Allocate the IRQ */
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 179 retval = request_irq(port->irq, apbuart_int, 0, "apbuart", port);
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 180 if (retval)
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 181 return retval;
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 182
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 183 /* Finally, enable interrupts */
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 184 cr = UART_GET_CTRL(port);
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 @185 UART_PUT_CTRL(port,
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 186 cr | UART_CTRL_RE | UART_CTRL_TE |
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 187 UART_CTRL_RI | UART_CTRL_TI);
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 188
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 189 return 0;
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 190 }
d4ac42a582e46d drivers/serial/apbuart.c Kristoffer Glembo 2009-11-04 191
--
0-DAY CI Kernel Test Service
https://01.org/lkp
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 3/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
@ 2022-09-02 3:47 kernel test robot
0 siblings, 0 replies; 29+ messages in thread
From: kernel test robot @ 2022-09-02 3:47 UTC (permalink / raw)
To: kbuild
[-- Attachment #1: Type: text/plain, Size: 8052 bytes --]
::::::
:::::: Manual check reason: "low confidence static check warning: drivers/tty/serial/mvebu-uart.c:336:8: sparse: int static [signed] [toplevel] writel( ... )"
::::::
BCC: lkp(a)intel.com
CC: kbuild-all(a)lists.01.org
In-Reply-To: <20220901110657.3305-4-jslaby@suse.cz>
References: <20220901110657.3305-4-jslaby@suse.cz>
TO: Jiri Slaby <jslaby@suse.cz>
Hi Jiri,
I love your patch! Perhaps something to improve:
[auto build test WARNING on tty/tty-testing]
[also build test WARNING on usb/usb-testing shawnguo/for-next linus/master v6.0-rc3 next-20220901]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Jiri-Slaby/tty-TX-helpers/20220901-190806
base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-testing
:::::: branch date: 17 hours ago
:::::: commit date: 17 hours ago
config: xtensa-randconfig-s033-20220901 (https://download.01.org/0day-ci/archive/20220902/202209021156.ZPlVbADh-lkp(a)intel.com/config)
compiler: xtensa-linux-gcc (GCC) 12.1.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-39-gce1a6720-dirty
# https://github.com/intel-lab-lkp/linux/commit/f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Jiri-Slaby/tty-TX-helpers/20220901-190806
git checkout f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=xtensa SHELL=/bin/bash drivers/tty/serial/
If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
drivers/tty/serial/mvebu-uart.c: note: in included file (through arch/xtensa/include/asm/bitops.h, include/linux/bitops.h, include/linux/kernel.h, ...):
arch/xtensa/include/asm/processor.h:103:2: sparse: sparse: Unsupported xtensa ABI
arch/xtensa/include/asm/processor.h:133:2: sparse: sparse: Unsupported Xtensa ABI
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got ;
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got &&
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got --
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got ->
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got ->
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got ->
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got ->
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got <
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got ==
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ;@the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: symbol 'writel' redeclared with different type (incompatible argument 1 (different base types)):
>> drivers/tty/serial/mvebu-uart.c:336:8: sparse: int static [signed] [toplevel] writel( ... )
drivers/tty/serial/mvebu-uart.c: note: in included file (through arch/xtensa/include/asm/io.h, include/linux/io.h):
include/asm-generic/io.h:273:20: sparse: note: previously declared as:
include/asm-generic/io.h:273:20: sparse: void static inline [gnu_inline] [toplevel] writel( ... )
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
drivers/tty/serial/mvebu-uart.c:336:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/mvebu-uart.c:336:8: sparse: note: previously declared as:
drivers/tty/serial/mvebu-uart.c:336:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: symbol 'writel' redeclared with different type (incompatible argument 1 (different base types)):
>> drivers/tty/serial/mvebu-uart.c:336:8: sparse: int static [signed] [toplevel] writel( ... )
include/asm-generic/io.h:273:20: sparse: note: previously declared as:
include/asm-generic/io.h:273:20: sparse: void static inline [gnu_inline] [toplevel] writel( ... )
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
drivers/tty/serial/mvebu-uart.c:336:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/mvebu-uart.c:336:8: sparse: note: previously declared as:
drivers/tty/serial/mvebu-uart.c:336:8: sparse: unsigned int [addressable] [toplevel] pending
drivers/tty/serial/mvebu-uart.c:343:31: sparse: sparse: too many arguments for function mvebu_uart_do_tx_chars
vim +336 drivers/tty/serial/mvebu-uart.c
30530791a7a032 Wilson Ding 2016-02-16 335
f6f99189d77ea4 Jiri Slaby 2022-09-01 @336 static DEFINE_UART_PORT_TX_HELPER_LIMITED(mvebu_uart_do_tx_chars, port, ch,
f6f99189d77ea4 Jiri Slaby 2022-09-01 337 !(readl(port->membase + UART_STAT) & STAT_TX_FIFO_FUL),
f6f99189d77ea4 Jiri Slaby 2022-09-01 338 writel(ch, port->membase + UART_TSH(port)),
f6f99189d77ea4 Jiri Slaby 2022-09-01 339 ({}));
f6f99189d77ea4 Jiri Slaby 2022-09-01 340
--
0-DAY CI Kernel Test Service
https://01.org/lkp
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 3/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
@ 2022-09-02 2:19 kernel test robot
0 siblings, 0 replies; 29+ messages in thread
From: kernel test robot @ 2022-09-02 2:19 UTC (permalink / raw)
To: kbuild
[-- Attachment #1: Type: text/plain, Size: 13920 bytes --]
::::::
:::::: Manual check reason: "low confidence static check warning: drivers/tty/serial/sifive.c:766:28: sparse: sparse: too many arguments for function __ssp_transmit_char"
::::::
BCC: lkp(a)intel.com
CC: kbuild-all(a)lists.01.org
In-Reply-To: <20220901110657.3305-4-jslaby@suse.cz>
References: <20220901110657.3305-4-jslaby@suse.cz>
TO: Jiri Slaby <jslaby@suse.cz>
Hi Jiri,
I love your patch! Perhaps something to improve:
[auto build test WARNING on tty/tty-testing]
[also build test WARNING on usb/usb-testing shawnguo/for-next linus/master v6.0-rc3 next-20220901]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Jiri-Slaby/tty-TX-helpers/20220901-190806
base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-testing
:::::: branch date: 15 hours ago
:::::: commit date: 15 hours ago
config: i386-randconfig-s001 (https://download.01.org/0day-ci/archive/20220902/202209021004.UjqqVdjR-lkp(a)intel.com/config)
compiler: gcc-11 (Debian 11.3.0-5) 11.3.0
reproduce:
# apt-get install sparse
# sparse version: v0.6.4-39-gce1a6720-dirty
# https://github.com/intel-lab-lkp/linux/commit/f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Jiri-Slaby/tty-TX-helpers/20220901-190806
git checkout f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
# save the config file
mkdir build_dir && cp config build_dir/.config
make W=1 C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=i386 SHELL=/bin/bash drivers/tty/serial/
If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got ;
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got &&
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got --
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got (
drivers/tty/serial/sifive.c:280:8: sparse: sparse: undefined identifier 'port'
drivers/tty/serial/sifive.c:280:8: sparse: sparse: undefined identifier 'port'
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got sifive_serial_port
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Trying to use reserved word 'struct' as identifier
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got }
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got ->
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got }
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got (
drivers/tty/serial/sifive.c:280:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/sifive.c:280:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got sifive_serial_port
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Trying to use reserved word 'struct' as identifier
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got }
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got ->
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got }
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got <
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got ==
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got }
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ;@the end of type declaration
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got }
drivers/tty/serial/sifive.c:280:8: sparse: sparse: symbol '__ssp_transmit_char' redeclared with different type (different argument counts):
drivers/tty/serial/sifive.c:280:8: sparse: int static [signed] [toplevel] __ssp_transmit_char( ... )
drivers/tty/serial/sifive.c:275:13: sparse: note: previously declared as:
drivers/tty/serial/sifive.c:275:13: sparse: void static [toplevel] __ssp_transmit_char( ... )
drivers/tty/serial/sifive.c:280:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/sifive.c:280:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/sifive.c:280:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
drivers/tty/serial/sifive.c:280:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/sifive.c:280:8: sparse: note: previously declared as:
drivers/tty/serial/sifive.c:280:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/sifive.c:280:8: sparse: sparse: symbol '__ssp_transmit_char' redeclared with different type (different argument counts):
drivers/tty/serial/sifive.c:280:8: sparse: int static [signed] [toplevel] __ssp_transmit_char( ... )
drivers/tty/serial/sifive.c:275:13: sparse: note: previously declared as:
drivers/tty/serial/sifive.c:275:13: sparse: void static [toplevel] __ssp_transmit_char( ... )
drivers/tty/serial/sifive.c:280:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/sifive.c:280:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/sifive.c:280:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
drivers/tty/serial/sifive.c:280:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/sifive.c:280:8: sparse: note: previously declared as:
drivers/tty/serial/sifive.c:280:8: sparse: unsigned int [addressable] [toplevel] pending
drivers/tty/serial/sifive.c:521:37: sparse: sparse: too many arguments for function __ssp_transmit_chars
>> drivers/tty/serial/sifive.c:766:28: sparse: sparse: too many arguments for function __ssp_transmit_char
--
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ;
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got &&
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got --
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got <
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ==
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'writel' redeclared with different type (incompatible argument 1 (different base types)):
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int static [signed] [toplevel] writel( ... )
drivers/tty/serial/altera_jtaguart.c: note: in included file (through include/linux/scatterlist.h, include/linux/kfifo.h, include/linux/tty_port.h, ...):
arch/x86/include/asm/io.h:69:1: sparse: note: previously declared as:
>> arch/x86/include/asm/io.h:69:1: sparse: void static inline [gnu_inline] [toplevel] writel( ... )
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: note: previously declared as:
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'writel' redeclared with different type (incompatible argument 1 (different base types)):
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int static [signed] [toplevel] writel( ... )
arch/x86/include/asm/io.h:69:1: sparse: note: previously declared as:
>> arch/x86/include/asm/io.h:69:1: sparse: void static inline [gnu_inline] [toplevel] writel( ... )
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: note: previously declared as:
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: unsigned int [addressable] [toplevel] pending
drivers/tty/serial/altera_jtaguart.c:150:36: sparse: sparse: too many arguments for function altera_jtaguart_do_tx_chars
vim +766 drivers/tty/serial/sifive.c
45c054d0815b15 Paul Walmsley 2019-04-12 760
3f8bab174cb26a Jiri Slaby 2022-03-03 761 static void sifive_serial_console_putchar(struct uart_port *port, unsigned char ch)
45c054d0815b15 Paul Walmsley 2019-04-12 762 {
45c054d0815b15 Paul Walmsley 2019-04-12 763 struct sifive_serial_port *ssp = port_to_sifive_serial_port(port);
45c054d0815b15 Paul Walmsley 2019-04-12 764
45c054d0815b15 Paul Walmsley 2019-04-12 765 __ssp_wait_for_xmitr(ssp);
45c054d0815b15 Paul Walmsley 2019-04-12 @766 __ssp_transmit_char(ssp, ch);
45c054d0815b15 Paul Walmsley 2019-04-12 767 }
45c054d0815b15 Paul Walmsley 2019-04-12 768
--
0-DAY CI Kernel Test Service
https://01.org/lkp
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 3/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
@ 2022-09-02 0:56 kernel test robot
0 siblings, 0 replies; 29+ messages in thread
From: kernel test robot @ 2022-09-02 0:56 UTC (permalink / raw)
To: kbuild
[-- Attachment #1: Type: text/plain, Size: 25795 bytes --]
::::::
:::::: Manual check reason: "low confidence static check warning: drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int static [signed] [toplevel] writel_relaxed( ... )"
::::::
BCC: lkp(a)intel.com
CC: kbuild-all(a)lists.01.org
In-Reply-To: <20220901110657.3305-4-jslaby@suse.cz>
References: <20220901110657.3305-4-jslaby@suse.cz>
TO: Jiri Slaby <jslaby@suse.cz>
Hi Jiri,
I love your patch! Perhaps something to improve:
[auto build test WARNING on tty/tty-testing]
[also build test WARNING on usb/usb-testing shawnguo/for-next linus/master v6.0-rc3 next-20220901]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Jiri-Slaby/tty-TX-helpers/20220901-190806
base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-testing
:::::: branch date: 14 hours ago
:::::: commit date: 14 hours ago
config: csky-randconfig-s032-20220901 (https://download.01.org/0day-ci/archive/20220902/202209020826.7xkUk5YM-lkp(a)intel.com/config)
compiler: csky-linux-gcc (GCC) 12.1.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-39-gce1a6720-dirty
# https://github.com/intel-lab-lkp/linux/commit/f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Jiri-Slaby/tty-TX-helpers/20220901-190806
git checkout f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=csky SHELL=/bin/bash drivers/tty/serial/
If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ;
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got &&
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got --
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got {
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got (
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got {
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got (
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got <
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ==
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'writel_relaxed' redeclared with different type (different argument counts):
>> drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int static [signed] [toplevel] writel_relaxed( ... )
drivers/tty/serial/altera_jtaguart.c: note: in included file (through arch/csky/include/asm/io.h, include/linux/io.h, include/linux/irq.h, ...):
include/asm-generic/io.h:376:20: sparse: note: previously declared as:
>> include/asm-generic/io.h:376:20: sparse: void static inline [gnu_inline] [toplevel] writel_relaxed( ... )
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: note: previously declared as:
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'writel_relaxed' redeclared with different type (different argument counts):
>> drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int static [signed] [toplevel] writel_relaxed( ... )
include/asm-generic/io.h:376:20: sparse: note: previously declared as:
>> include/asm-generic/io.h:376:20: sparse: void static inline [gnu_inline] [toplevel] writel_relaxed( ... )
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: note: previously declared as:
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: unsigned int [addressable] [toplevel] pending
drivers/tty/serial/altera_jtaguart.c:150:36: sparse: sparse: too many arguments for function altera_jtaguart_do_tx_chars
>> drivers/tty/serial/altera_jtaguart.c:180:9: sparse: sparse: too many arguments for function writel_relaxed
drivers/tty/serial/altera_jtaguart.c:202:9: sparse: sparse: too many arguments for function writel_relaxed
drivers/tty/serial/altera_jtaguart.c:219:9: sparse: sparse: too many arguments for function writel_relaxed
--
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got ;
>> drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got &&
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got --
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got {
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got (
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got ->
>> drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got {
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got (
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got ->
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got <
>> drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got ==
>> drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: got }
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: symbol 'writel_relaxed' redeclared with different type (different argument counts):
>> drivers/tty/serial/mvebu-uart.c:336:8: sparse: int static [signed] [toplevel] writel_relaxed( ... )
drivers/tty/serial/mvebu-uart.c: note: in included file (through arch/csky/include/asm/io.h, include/linux/io.h):
include/asm-generic/io.h:376:20: sparse: note: previously declared as:
>> include/asm-generic/io.h:376:20: sparse: void static inline [gnu_inline] [toplevel] writel_relaxed( ... )
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
>> drivers/tty/serial/mvebu-uart.c:336:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/mvebu-uart.c:336:8: sparse: note: previously declared as:
>> drivers/tty/serial/mvebu-uart.c:336:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: symbol 'writel_relaxed' redeclared with different type (different argument counts):
>> drivers/tty/serial/mvebu-uart.c:336:8: sparse: int static [signed] [toplevel] writel_relaxed( ... )
include/asm-generic/io.h:376:20: sparse: note: previously declared as:
>> include/asm-generic/io.h:376:20: sparse: void static inline [gnu_inline] [toplevel] writel_relaxed( ... )
>> drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: cannot dereference this type
>> drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/mvebu-uart.c:336:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
>> drivers/tty/serial/mvebu-uart.c:336:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/mvebu-uart.c:336:8: sparse: note: previously declared as:
>> drivers/tty/serial/mvebu-uart.c:336:8: sparse: unsigned int [addressable] [toplevel] pending
>> drivers/tty/serial/mvebu-uart.c:343:31: sparse: sparse: too many arguments for function mvebu_uart_do_tx_chars
>> drivers/tty/serial/mvebu-uart.c:390:9: sparse: sparse: too many arguments for function writel_relaxed
drivers/tty/serial/mvebu-uart.c:397:9: sparse: sparse: too many arguments for function writel_relaxed
drivers/tty/serial/mvebu-uart.c:399:9: sparse: sparse: too many arguments for function writel_relaxed
drivers/tty/serial/mvebu-uart.c:403:9: sparse: sparse: too many arguments for function writel_relaxed
drivers/tty/serial/mvebu-uart.c:446:9: sparse: sparse: too many arguments for function writel_relaxed
drivers/tty/serial/mvebu-uart.c:524:9: sparse: sparse: too many arguments for function writel_relaxed
drivers/tty/serial/mvebu-uart.c:532:9: sparse: sparse: too many arguments for function writel_relaxed
drivers/tty/serial/mvebu-uart.c:987:9: sparse: sparse: too many arguments for function writel_relaxed
drivers/tty/serial/mvebu-uart.c:989:9: sparse: sparse: too many arguments for function writel_relaxed
drivers/tty/serial/mvebu-uart.c:1153:9: sparse: sparse: too many arguments for function writel_relaxed
drivers/tty/serial/mvebu-uart.c:1166:17: sparse: sparse: too many arguments for function writel_relaxed
drivers/tty/serial/mvebu-uart.c:1193:9: sparse: sparse: too many arguments for function writel_relaxed
drivers/tty/serial/mvebu-uart.c:1217:9: sparse: sparse: too many arguments for function writel_relaxed
drivers/tty/serial/mvebu-uart.c:1260:9: sparse: sparse: too many arguments for function writel_relaxed
drivers/tty/serial/mvebu-uart.c:1261:9: sparse: sparse: too many arguments for function writel_relaxed
--
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: got ;
>> drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: got &&
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: got --
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: got ->
>> drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: got }
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: got ->
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: got }
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: got <
>> drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: got ==
>> drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: got }
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: got }
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: symbol 'serial_omap_put_char' redeclared with different type (incompatible argument 1 (different base types)):
>> drivers/tty/serial/omap-serial.c:351:8: sparse: int static [signed] [toplevel] serial_omap_put_char( ... )
drivers/tty/serial/omap-serial.c:340:13: sparse: note: previously declared as:
>> drivers/tty/serial/omap-serial.c:340:13: sparse: void static [toplevel] serial_omap_put_char( ... )
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
>> drivers/tty/serial/omap-serial.c:351:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/omap-serial.c:351:8: sparse: note: previously declared as:
>> drivers/tty/serial/omap-serial.c:351:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: symbol 'serial_omap_put_char' redeclared with different type (incompatible argument 1 (different base types)):
>> drivers/tty/serial/omap-serial.c:351:8: sparse: int static [signed] [toplevel] serial_omap_put_char( ... )
drivers/tty/serial/omap-serial.c:340:13: sparse: note: previously declared as:
>> drivers/tty/serial/omap-serial.c:340:13: sparse: void static [toplevel] serial_omap_put_char( ... )
>> drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: cannot dereference this type
>> drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/omap-serial.c:351:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
>> drivers/tty/serial/omap-serial.c:351:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/omap-serial.c:351:8: sparse: note: previously declared as:
>> drivers/tty/serial/omap-serial.c:351:8: sparse: unsigned int [addressable] [toplevel] pending
>> drivers/tty/serial/omap-serial.c:553:39: sparse: sparse: too many arguments for function transmit_chars
vim +137 drivers/tty/serial/altera_jtaguart.c
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 136
f6f99189d77ea4 drivers/tty/serial/altera_jtaguart.c Jiri Slaby 2022-09-01 @137 static DEFINE_UART_PORT_TX_HELPER_LIMITED(altera_jtaguart_do_tx_chars, port, ch,
f6f99189d77ea4 drivers/tty/serial/altera_jtaguart.c Jiri Slaby 2022-09-01 138 true,
f6f99189d77ea4 drivers/tty/serial/altera_jtaguart.c Jiri Slaby 2022-09-01 139 writel(ch, port->membase + ALTERA_JTAGUART_DATA_REG),
f6f99189d77ea4 drivers/tty/serial/altera_jtaguart.c Jiri Slaby 2022-09-01 140 ({}));
f6f99189d77ea4 drivers/tty/serial/altera_jtaguart.c Jiri Slaby 2022-09-01 141
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 142 static void altera_jtaguart_tx_chars(struct altera_jtaguart *pp)
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 143 {
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 144 struct uart_port *port = &pp->port;
f6f99189d77ea4 drivers/tty/serial/altera_jtaguart.c Jiri Slaby 2022-09-01 145 unsigned int space;
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 146
f6f99189d77ea4 drivers/tty/serial/altera_jtaguart.c Jiri Slaby 2022-09-01 147 space = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) &
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 148 ALTERA_JTAGUART_CONTROL_WSPACE_MSK) >>
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 149 ALTERA_JTAGUART_CONTROL_WSPACE_OFF;
f6f99189d77ea4 drivers/tty/serial/altera_jtaguart.c Jiri Slaby 2022-09-01 150 altera_jtaguart_do_tx_chars(port, space);
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 151 }
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 152
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 153 static irqreturn_t altera_jtaguart_interrupt(int irq, void *data)
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 154 {
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 155 struct uart_port *port = data;
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 156 struct altera_jtaguart *pp =
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 157 container_of(port, struct altera_jtaguart, port);
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 158 unsigned int isr;
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 159
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 160 isr = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) >>
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 161 ALTERA_JTAGUART_CONTROL_RI_OFF) & pp->imr;
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 162
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 163 spin_lock(&port->lock);
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 164
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 165 if (isr & ALTERA_JTAGUART_CONTROL_RE_MSK)
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 166 altera_jtaguart_rx_chars(pp);
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 167 if (isr & ALTERA_JTAGUART_CONTROL_WE_MSK)
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 168 altera_jtaguart_tx_chars(pp);
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 169
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 170 spin_unlock(&port->lock);
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 171
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 172 return IRQ_RETVAL(isr);
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 173 }
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 174
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 175 static void altera_jtaguart_config_port(struct uart_port *port, int flags)
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 176 {
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 177 port->type = PORT_ALTERA_JTAGUART;
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 178
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 179 /* Clear mask, so no surprise interrupts. */
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 @180 writel(0, port->membase + ALTERA_JTAGUART_CONTROL_REG);
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 181 }
5bcd601049c6b2 drivers/serial/altera_jtaguart.c Tobias Klauser 2010-05-05 182
--
0-DAY CI Kernel Test Service
https://01.org/lkp
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 3/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
@ 2022-09-01 23:55 kernel test robot
0 siblings, 0 replies; 29+ messages in thread
From: kernel test robot @ 2022-09-01 23:55 UTC (permalink / raw)
To: kbuild
[-- Attachment #1: Type: text/plain, Size: 30543 bytes --]
::::::
:::::: Manual check reason: "low confidence static check warning: drivers/tty/serial/amba-pl010.c:165:8: sparse: int static [signed] [toplevel] __raw_writel( ... )"
::::::
BCC: lkp(a)intel.com
CC: kbuild-all(a)lists.01.org
In-Reply-To: <20220901110657.3305-4-jslaby@suse.cz>
References: <20220901110657.3305-4-jslaby@suse.cz>
TO: Jiri Slaby <jslaby@suse.cz>
Hi Jiri,
I love your patch! Perhaps something to improve:
[auto build test WARNING on tty/tty-testing]
[also build test WARNING on usb/usb-testing shawnguo/for-next linus/master v6.0-rc3]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Jiri-Slaby/tty-TX-helpers/20220901-190806
base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-testing
:::::: branch date: 13 hours ago
:::::: commit date: 13 hours ago
config: arm-randconfig-s033-20220901 (https://download.01.org/0day-ci/archive/20220902/202209020725.6RNo5PyB-lkp(a)intel.com/config)
compiler: arm-linux-gnueabi-gcc (GCC) 12.1.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-39-gce1a6720-dirty
# https://github.com/intel-lab-lkp/linux/commit/f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Jiri-Slaby/tty-TX-helpers/20220901-190806
git checkout f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=arm SHELL=/bin/bash
If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ;
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got &&
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got --
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got {
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got (
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got }
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ->
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got }
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got {
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got (
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got }
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ->
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got }
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got <
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ==
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got }
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ;@the end of type declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got }
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: symbol '__raw_writel' redeclared with different type (different argument counts):
>> drivers/tty/serial/amba-pl010.c:165:8: sparse: int static [signed] [toplevel] __raw_writel( ... )
drivers/tty/serial/amba-pl010.c: note: in included file (through include/linux/scatterlist.h, include/linux/kfifo.h, include/linux/tty_port.h, ...):
arch/arm/include/asm/io.h:93:20: sparse: note: previously declared as:
>> arch/arm/include/asm/io.h:93:20: sparse: void static inline [gnu_inline] [toplevel] __raw_writel( ... )
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
drivers/tty/serial/amba-pl010.c:165:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/amba-pl010.c:165:8: sparse: note: previously declared as:
drivers/tty/serial/amba-pl010.c:165:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: symbol '__raw_writel' redeclared with different type (different argument counts):
>> drivers/tty/serial/amba-pl010.c:165:8: sparse: int static [signed] [toplevel] __raw_writel( ... )
arch/arm/include/asm/io.h:93:20: sparse: note: previously declared as:
>> arch/arm/include/asm/io.h:93:20: sparse: void static inline [gnu_inline] [toplevel] __raw_writel( ... )
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
drivers/tty/serial/amba-pl010.c:165:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/amba-pl010.c:165:8: sparse: note: previously declared as:
drivers/tty/serial/amba-pl010.c:165:8: sparse: unsigned int [addressable] [toplevel] pending
>> drivers/tty/serial/amba-pl010.c:175:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/amba-pl010.c:214:47: sparse: sparse: too many arguments for function pl010_tx_chars
drivers/tty/serial/amba-pl010.c:273:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/amba-pl010.c:307:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/amba-pl010.c:331:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/amba-pl010.c:334:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/amba-pl010.c:424:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/amba-pl010.c:425:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/amba-pl010.c:432:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/amba-pl010.c:433:9: sparse: sparse: too many arguments for function __raw_writel
--
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ;
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got &&
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got --
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got {
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got (
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got {
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got (
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got <
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ==
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol '__raw_writel' redeclared with different type (different argument counts):
>> drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int static [signed] [toplevel] __raw_writel( ... )
drivers/tty/serial/altera_jtaguart.c: note: in included file (through include/linux/io.h, include/linux/irq.h, include/asm-generic/hardirq.h, ...):
arch/arm/include/asm/io.h:93:20: sparse: note: previously declared as:
>> arch/arm/include/asm/io.h:93:20: sparse: void static inline [gnu_inline] [toplevel] __raw_writel( ... )
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: note: previously declared as:
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol '__raw_writel' redeclared with different type (different argument counts):
>> drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int static [signed] [toplevel] __raw_writel( ... )
arch/arm/include/asm/io.h:93:20: sparse: note: previously declared as:
>> arch/arm/include/asm/io.h:93:20: sparse: void static inline [gnu_inline] [toplevel] __raw_writel( ... )
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: note: previously declared as:
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: unsigned int [addressable] [toplevel] pending
drivers/tty/serial/altera_jtaguart.c:150:36: sparse: sparse: too many arguments for function altera_jtaguart_do_tx_chars
>> drivers/tty/serial/altera_jtaguart.c:180:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/altera_jtaguart.c:202:9: sparse: sparse: too many arguments for function __raw_writel
drivers/tty/serial/altera_jtaguart.c:219:9: sparse: sparse: too many arguments for function __raw_writel
--
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: got ;
>> drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: got &&
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: got --
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: got ,
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: got ->
>> drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: got }
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: got ,
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: got ->
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: got }
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: got <
>> drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: got ==
>> drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: got }
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: got }
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: symbol 'serial_out' redeclared with different type (incompatible argument 1 (different base types)):
>> drivers/tty/serial/sprd_serial.c:627:8: sparse: int static [signed] [toplevel] serial_out( ... )
drivers/tty/serial/sprd_serial.c:143:20: sparse: note: previously declared as:
>> drivers/tty/serial/sprd_serial.c:143:20: sparse: void static inline [gnu_inline] [toplevel] serial_out( ... )
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
>> drivers/tty/serial/sprd_serial.c:627:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/sprd_serial.c:627:8: sparse: note: previously declared as:
>> drivers/tty/serial/sprd_serial.c:627:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: symbol 'serial_out' redeclared with different type (incompatible argument 1 (different base types)):
>> drivers/tty/serial/sprd_serial.c:627:8: sparse: int static [signed] [toplevel] serial_out( ... )
drivers/tty/serial/sprd_serial.c:143:20: sparse: note: previously declared as:
>> drivers/tty/serial/sprd_serial.c:143:20: sparse: void static inline [gnu_inline] [toplevel] serial_out( ... )
>> drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: cannot dereference this type
>> drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/sprd_serial.c:627:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
>> drivers/tty/serial/sprd_serial.c:627:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/sprd_serial.c:627:8: sparse: note: previously declared as:
>> drivers/tty/serial/sprd_serial.c:627:8: sparse: unsigned int [addressable] [toplevel] pending
>> drivers/tty/serial/sprd_serial.c:648:27: sparse: sparse: too many arguments for function serial_out
drivers/tty/serial/sprd_serial.c:651:27: sparse: sparse: too many arguments for function serial_out
>> drivers/tty/serial/sprd_serial.c:658:24: sparse: sparse: too many arguments for function sprd_tx
drivers/tty/serial/sprd_serial.c:692:19: sparse: sparse: too many arguments for function serial_out
drivers/tty/serial/sprd_serial.c:706:19: sparse: sparse: too many arguments for function serial_out
drivers/tty/serial/sprd_serial.c:707:19: sparse: sparse: too many arguments for function serial_out
drivers/tty/serial/sprd_serial.c:724:19: sparse: sparse: too many arguments for function serial_out
drivers/tty/serial/sprd_serial.c:732:19: sparse: sparse: too many arguments for function serial_out
drivers/tty/serial/sprd_serial.c:741:19: sparse: sparse: too many arguments for function serial_out
drivers/tty/serial/sprd_serial.c:742:19: sparse: sparse: too many arguments for function serial_out
drivers/tty/serial/sprd_serial.c:828:19: sparse: sparse: too many arguments for function serial_out
drivers/tty/serial/sprd_serial.c:831:19: sparse: sparse: too many arguments for function serial_out
drivers/tty/serial/sprd_serial.c:833:19: sparse: sparse: too many arguments for function serial_out
drivers/tty/serial/sprd_serial.c:835:19: sparse: sparse: too many arguments for function serial_out
--
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got ;
>> drivers/tty/serial/sifive.c:280:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got &&
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got --
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got (
drivers/tty/serial/sifive.c:280:8: sparse: sparse: undefined identifier 'port'
drivers/tty/serial/sifive.c:280:8: sparse: sparse: undefined identifier 'port'
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got sifive_serial_port
>> drivers/tty/serial/sifive.c:280:8: sparse: sparse: Trying to use reserved word 'struct' as identifier
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got }
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got ->
>> drivers/tty/serial/sifive.c:280:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got }
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got (
>> drivers/tty/serial/sifive.c:280:8: sparse: sparse: cannot dereference this type
>> drivers/tty/serial/sifive.c:280:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got sifive_serial_port
>> drivers/tty/serial/sifive.c:280:8: sparse: sparse: Trying to use reserved word 'struct' as identifier
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got }
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got ->
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got }
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got <
>> drivers/tty/serial/sifive.c:280:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got ==
>> drivers/tty/serial/sifive.c:280:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got }
drivers/tty/serial/sifive.c:280:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/sifive.c:280:8: sparse: sparse: got }
drivers/tty/serial/sifive.c:280:8: sparse: sparse: symbol '__ssp_transmit_char' redeclared with different type (different argument counts):
>> drivers/tty/serial/sifive.c:280:8: sparse: int static [signed] [toplevel] __ssp_transmit_char( ... )
drivers/tty/serial/sifive.c:275:13: sparse: note: previously declared as:
>> drivers/tty/serial/sifive.c:275:13: sparse: void static [toplevel] __ssp_transmit_char( ... )
drivers/tty/serial/sifive.c:280:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/sifive.c:280:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/sifive.c:280:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
>> drivers/tty/serial/sifive.c:280:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/sifive.c:280:8: sparse: note: previously declared as:
>> drivers/tty/serial/sifive.c:280:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/sifive.c:280:8: sparse: sparse: symbol '__ssp_transmit_char' redeclared with different type (different argument counts):
>> drivers/tty/serial/sifive.c:280:8: sparse: int static [signed] [toplevel] __ssp_transmit_char( ... )
drivers/tty/serial/sifive.c:275:13: sparse: note: previously declared as:
>> drivers/tty/serial/sifive.c:275:13: sparse: void static [toplevel] __ssp_transmit_char( ... )
>> drivers/tty/serial/sifive.c:280:8: sparse: sparse: cannot dereference this type
>> drivers/tty/serial/sifive.c:280:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/sifive.c:280:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
>> drivers/tty/serial/sifive.c:280:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/sifive.c:280:8: sparse: note: previously declared as:
>> drivers/tty/serial/sifive.c:280:8: sparse: unsigned int [addressable] [toplevel] pending
>> drivers/tty/serial/sifive.c:521:37: sparse: sparse: too many arguments for function __ssp_transmit_chars
vim +165 drivers/tty/serial/amba-pl010.c
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 164
f6f99189d77ea4 drivers/tty/serial/amba-pl010.c Jiri Slaby 2022-09-01 @165 static DEFINE_UART_PORT_TX_HELPER_LIMITED(pl010_tx_chars, port, ch,
f6f99189d77ea4 drivers/tty/serial/amba-pl010.c Jiri Slaby 2022-09-01 166 true,
f6f99189d77ea4 drivers/tty/serial/amba-pl010.c Jiri Slaby 2022-09-01 167 writel(ch, port->membase + UART01x_DR),
f6f99189d77ea4 drivers/tty/serial/amba-pl010.c Jiri Slaby 2022-09-01 168 ({}));
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 169
1b0646a033c370 drivers/serial/amba-pl010.c Russell King 2007-04-22 170 static void pl010_modem_status(struct uart_amba_port *uap)
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 171 {
f166d19f9e8243 drivers/tty/serial/amba-pl010.c Jiri Slaby 2022-02-24 172 struct uart_port *port = &uap->port;
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 173 unsigned int status, delta;
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 174
f166d19f9e8243 drivers/tty/serial/amba-pl010.c Jiri Slaby 2022-02-24 @175 writel(0, port->membase + UART010_ICR);
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 176
f166d19f9e8243 drivers/tty/serial/amba-pl010.c Jiri Slaby 2022-02-24 177 status = readb(port->membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 178
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 179 delta = status ^ uap->old_status;
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 180 uap->old_status = status;
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 181
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 182 if (!delta)
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 183 return;
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 184
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 185 if (delta & UART01x_FR_DCD)
f166d19f9e8243 drivers/tty/serial/amba-pl010.c Jiri Slaby 2022-02-24 186 uart_handle_dcd_change(port, status & UART01x_FR_DCD);
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 187
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 188 if (delta & UART01x_FR_DSR)
f166d19f9e8243 drivers/tty/serial/amba-pl010.c Jiri Slaby 2022-02-24 189 port->icount.dsr++;
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 190
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 191 if (delta & UART01x_FR_CTS)
f166d19f9e8243 drivers/tty/serial/amba-pl010.c Jiri Slaby 2022-02-24 192 uart_handle_cts_change(port, status & UART01x_FR_CTS);
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 193
f166d19f9e8243 drivers/tty/serial/amba-pl010.c Jiri Slaby 2022-02-24 194 wake_up_interruptible(&port->state->port.delta_msr_wait);
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 195 }
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 196
--
0-DAY CI Kernel Test Service
https://01.org/lkp
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 3/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
@ 2022-09-01 23:45 kernel test robot
0 siblings, 0 replies; 29+ messages in thread
From: kernel test robot @ 2022-09-01 23:45 UTC (permalink / raw)
To: kbuild
[-- Attachment #1: Type: text/plain, Size: 12565 bytes --]
::::::
:::::: Manual check reason: "low confidence static check warning: drivers/tty/serial/rp2.c:428:8: sparse: int static [signed] [toplevel] writeb( ... )"
::::::
BCC: lkp(a)intel.com
CC: kbuild-all(a)lists.01.org
In-Reply-To: <20220901110657.3305-4-jslaby@suse.cz>
References: <20220901110657.3305-4-jslaby@suse.cz>
TO: Jiri Slaby <jslaby@suse.cz>
Hi Jiri,
I love your patch! Perhaps something to improve:
[auto build test WARNING on tty/tty-testing]
[also build test WARNING on usb/usb-testing shawnguo/for-next linus/master v6.0-rc3 next-20220901]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Jiri-Slaby/tty-TX-helpers/20220901-190806
base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-testing
:::::: branch date: 12 hours ago
:::::: commit date: 12 hours ago
config: loongarch-randconfig-s053-20220901 (https://download.01.org/0day-ci/archive/20220902/202209020730.zFLAGT0F-lkp(a)intel.com/config)
compiler: loongarch64-linux-gcc (GCC) 12.1.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-39-gce1a6720-dirty
# https://github.com/intel-lab-lkp/linux/commit/f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Jiri-Slaby/tty-TX-helpers/20220901-190806
git checkout f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=loongarch SHELL=/bin/bash drivers/tty/serial/
If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got ;
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got &&
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got --
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got (
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got ->
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got }
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got (
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got ->
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got }
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got <
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got ==
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got }
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ;@the end of type declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got }
drivers/tty/serial/rp2.c:428:8: sparse: sparse: symbol 'writeb' redeclared with different type (incompatible argument 1 (different base types)):
>> drivers/tty/serial/rp2.c:428:8: sparse: int static [signed] [toplevel] writeb( ... )
drivers/tty/serial/rp2.c: note: in included file (through arch/loongarch/include/asm/io.h, include/linux/io.h):
include/asm-generic/io.h:249:20: sparse: note: previously declared as:
include/asm-generic/io.h:249:20: sparse: void static inline [gnu_inline] [toplevel] writeb( ... )
drivers/tty/serial/rp2.c:428:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/rp2.c:428:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/rp2.c:428:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
drivers/tty/serial/rp2.c:428:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/rp2.c:428:8: sparse: note: previously declared as:
drivers/tty/serial/rp2.c:428:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/rp2.c:428:8: sparse: sparse: symbol 'writeb' redeclared with different type (incompatible argument 1 (different base types)):
>> drivers/tty/serial/rp2.c:428:8: sparse: int static [signed] [toplevel] writeb( ... )
include/asm-generic/io.h:249:20: sparse: note: previously declared as:
include/asm-generic/io.h:249:20: sparse: void static inline [gnu_inline] [toplevel] writeb( ... )
drivers/tty/serial/rp2.c:428:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/rp2.c:428:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/rp2.c:428:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
drivers/tty/serial/rp2.c:428:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/rp2.c:428:8: sparse: note: previously declared as:
drivers/tty/serial/rp2.c:428:8: sparse: unsigned int [addressable] [toplevel] pending
drivers/tty/serial/rp2.c:449:29: sparse: sparse: too many arguments for function rp2_tx_chars
--
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ;
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got &&
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got --
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got <
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ==
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'writel' redeclared with different type (incompatible argument 1 (different base types)):
>> drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int static [signed] [toplevel] writel( ... )
drivers/tty/serial/altera_jtaguart.c: note: in included file (through arch/loongarch/include/asm/io.h, include/linux/io.h, include/linux/irq.h, ...):
include/asm-generic/io.h:273:20: sparse: note: previously declared as:
>> include/asm-generic/io.h:273:20: sparse: void static inline [gnu_inline] [toplevel] writel( ... )
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: note: previously declared as:
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'writel' redeclared with different type (incompatible argument 1 (different base types)):
>> drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int static [signed] [toplevel] writel( ... )
include/asm-generic/io.h:273:20: sparse: note: previously declared as:
>> include/asm-generic/io.h:273:20: sparse: void static inline [gnu_inline] [toplevel] writel( ... )
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: note: previously declared as:
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: unsigned int [addressable] [toplevel] pending
drivers/tty/serial/altera_jtaguart.c:150:36: sparse: sparse: too many arguments for function altera_jtaguart_do_tx_chars
vim +428 drivers/tty/serial/rp2.c
7d9f49afa451d85 Kevin Cernekee 2013-01-16 427
f6f99189d77ea45 Jiri Slaby 2022-09-01 @428 static DEFINE_UART_PORT_TX_HELPER_LIMITED(rp2_tx_chars, port, ch,
f6f99189d77ea45 Jiri Slaby 2022-09-01 429 true,
f6f99189d77ea45 Jiri Slaby 2022-09-01 430 writeb(ch, port_to_up(port)->base + RP2_DATA_BYTE),
f6f99189d77ea45 Jiri Slaby 2022-09-01 431 ({}));
7d9f49afa451d85 Kevin Cernekee 2013-01-16 432
--
0-DAY CI Kernel Test Service
https://01.org/lkp
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 3/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
@ 2022-09-01 22:43 kernel test robot
0 siblings, 0 replies; 29+ messages in thread
From: kernel test robot @ 2022-09-01 22:43 UTC (permalink / raw)
To: kbuild
[-- Attachment #1: Type: text/plain, Size: 28147 bytes --]
::::::
:::::: Manual check reason: "low confidence static check warning: drivers/tty/serial/rp2.c:428:8: sparse: sparse: Trying to use reserved word 'for' as identifier"
::::::
BCC: lkp(a)intel.com
CC: kbuild-all(a)lists.01.org
In-Reply-To: <20220901110657.3305-4-jslaby@suse.cz>
References: <20220901110657.3305-4-jslaby@suse.cz>
TO: Jiri Slaby <jslaby@suse.cz>
Hi Jiri,
I love your patch! Perhaps something to improve:
[auto build test WARNING on tty/tty-testing]
[also build test WARNING on usb/usb-testing shawnguo/for-next linus/master v6.0-rc3 next-20220901]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Jiri-Slaby/tty-TX-helpers/20220901-190806
base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-testing
:::::: branch date: 12 hours ago
:::::: commit date: 12 hours ago
config: alpha-randconfig-s042-20220901 (https://download.01.org/0day-ci/archive/20220902/202209020604.lkQbCJHY-lkp(a)intel.com/config)
compiler: alpha-linux-gcc (GCC) 12.1.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-39-gce1a6720-dirty
# https://github.com/intel-lab-lkp/linux/commit/f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Jiri-Slaby/tty-TX-helpers/20220901-190806
git checkout f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=alpha SHELL=/bin/bash drivers/tty/serial/
If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got ;
>> drivers/tty/serial/rp2.c:428:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got &&
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got --
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got (
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got ->
>> drivers/tty/serial/rp2.c:428:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got }
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got (
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got ->
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got }
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got <
>> drivers/tty/serial/rp2.c:428:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got ==
>> drivers/tty/serial/rp2.c:428:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got }
drivers/tty/serial/rp2.c:428:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/rp2.c:428:8: sparse: sparse: got }
drivers/tty/serial/rp2.c:428:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/rp2.c:428:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/rp2.c:428:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
>> drivers/tty/serial/rp2.c:428:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/rp2.c:428:8: sparse: note: previously declared as:
>> drivers/tty/serial/rp2.c:428:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
>> drivers/tty/serial/rp2.c:428:8: sparse: sparse: cannot dereference this type
>> drivers/tty/serial/rp2.c:428:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/rp2.c:428:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
>> drivers/tty/serial/rp2.c:428:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/rp2.c:428:8: sparse: note: previously declared as:
>> drivers/tty/serial/rp2.c:428:8: sparse: unsigned int [addressable] [toplevel] pending
>> drivers/tty/serial/rp2.c:449:29: sparse: sparse: too many arguments for function rp2_tx_chars
--
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: got ;
>> drivers/tty/serial/st-asc.c:233:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: got &&
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: got --
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: got ,
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: got ->
>> drivers/tty/serial/st-asc.c:233:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: got }
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: got ,
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: got ->
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: got }
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: got <
>> drivers/tty/serial/st-asc.c:233:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: got ==
>> drivers/tty/serial/st-asc.c:233:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: got }
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: got }
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: symbol 'asc_out' redeclared with different type (incompatible argument 1 (different base types)):
>> drivers/tty/serial/st-asc.c:233:8: sparse: int static [signed] [toplevel] asc_out( ... )
drivers/tty/serial/st-asc.c:160:20: sparse: note: previously declared as:
>> drivers/tty/serial/st-asc.c:160:20: sparse: void static inline [gnu_inline] [toplevel] asc_out( ... )
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
>> drivers/tty/serial/st-asc.c:233:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/st-asc.c:233:8: sparse: note: previously declared as:
>> drivers/tty/serial/st-asc.c:233:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: symbol 'asc_out' redeclared with different type (incompatible argument 1 (different base types)):
>> drivers/tty/serial/st-asc.c:233:8: sparse: int static [signed] [toplevel] asc_out( ... )
drivers/tty/serial/st-asc.c:160:20: sparse: note: previously declared as:
>> drivers/tty/serial/st-asc.c:160:20: sparse: void static inline [gnu_inline] [toplevel] asc_out( ... )
>> drivers/tty/serial/st-asc.c:233:8: sparse: sparse: cannot dereference this type
>> drivers/tty/serial/st-asc.c:233:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/st-asc.c:233:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
>> drivers/tty/serial/st-asc.c:233:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/st-asc.c:233:8: sparse: note: previously declared as:
>> drivers/tty/serial/st-asc.c:233:8: sparse: unsigned int [addressable] [toplevel] pending
>> drivers/tty/serial/st-asc.c:245:30: sparse: sparse: too many arguments for function asc_do_transmit_chars
>> drivers/tty/serial/st-asc.c:457:24: sparse: sparse: too many arguments for function asc_out
drivers/tty/serial/st-asc.c:489:16: sparse: sparse: too many arguments for function asc_out
drivers/tty/serial/st-asc.c:493:16: sparse: sparse: too many arguments for function asc_out
drivers/tty/serial/st-asc.c:494:16: sparse: sparse: too many arguments for function asc_out
drivers/tty/serial/st-asc.c:543:24: sparse: sparse: too many arguments for function asc_out
drivers/tty/serial/st-asc.c:557:24: sparse: sparse: too many arguments for function asc_out
drivers/tty/serial/st-asc.c:592:16: sparse: sparse: too many arguments for function asc_out
drivers/tty/serial/st-asc.c:595:16: sparse: sparse: too many arguments for function asc_out
--
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ;
>> drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got &&
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got --
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
>> drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ->
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got <
>> drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got ==
>> drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: got }
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
>> drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: note: previously declared as:
>> drivers/tty/serial/altera_jtaguart.c:137:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
>> drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: cannot dereference this type
>> drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
>> drivers/tty/serial/altera_jtaguart.c:137:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/altera_jtaguart.c:137:8: sparse: note: previously declared as:
>> drivers/tty/serial/altera_jtaguart.c:137:8: sparse: unsigned int [addressable] [toplevel] pending
>> drivers/tty/serial/altera_jtaguart.c:150:36: sparse: sparse: too many arguments for function altera_jtaguart_do_tx_chars
--
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ;
>> drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got &&
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got --
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ->
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ->
>> drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got }
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ->
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ->
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got }
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got <
>> drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ==
>> drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got }
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got }
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
>> drivers/tty/serial/amba-pl010.c:165:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/amba-pl010.c:165:8: sparse: note: previously declared as:
>> drivers/tty/serial/amba-pl010.c:165:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
>> drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: cannot dereference this type
>> drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
>> drivers/tty/serial/amba-pl010.c:165:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/amba-pl010.c:165:8: sparse: note: previously declared as:
>> drivers/tty/serial/amba-pl010.c:165:8: sparse: unsigned int [addressable] [toplevel] pending
>> drivers/tty/serial/amba-pl010.c:214:47: sparse: sparse: too many arguments for function pl010_tx_chars
--
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: got ;
>> drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: got &&
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: got --
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: got ,
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: got ->
>> drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: got }
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: got ,
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: got ->
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: got }
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: got <
>> drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: got ==
>> drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: got }
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: got }
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: symbol 'bcm_uart_writel' redeclared with different type (incompatible argument 1 (different base types)):
>> drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: int static [signed] [toplevel] bcm_uart_writel( ... )
drivers/tty/serial/bcm63xx_uart.c:79:20: sparse: note: previously declared as:
>> drivers/tty/serial/bcm63xx_uart.c:79:20: sparse: void static inline [gnu_inline] [toplevel] bcm_uart_writel( ... )
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
>> drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: note: previously declared as:
>> drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: symbol 'bcm_uart_writel' redeclared with different type (incompatible argument 1 (different base types)):
>> drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: int static [signed] [toplevel] bcm_uart_writel( ... )
drivers/tty/serial/bcm63xx_uart.c:79:20: sparse: note: previously declared as:
>> drivers/tty/serial/bcm63xx_uart.c:79:20: sparse: void static inline [gnu_inline] [toplevel] bcm_uart_writel( ... )
>> drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: cannot dereference this type
>> drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
>> drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: note: previously declared as:
>> drivers/tty/serial/bcm63xx_uart.c:300:8: sparse: unsigned int [addressable] [toplevel] pending
>> drivers/tty/serial/bcm63xx_uart.c:316:30: sparse: sparse: too many arguments for function bcm_uart_tx
>> drivers/tty/serial/bcm63xx_uart.c:323:24: sparse: sparse: too many arguments for function bcm_uart_writel
drivers/tty/serial/bcm63xx_uart.c:369:24: sparse: sparse: too many arguments for function bcm_uart_writel
drivers/tty/serial/bcm63xx_uart.c:382:24: sparse: sparse: too many arguments for function bcm_uart_writel
drivers/tty/serial/bcm63xx_uart.c:395:24: sparse: sparse: too many arguments for function bcm_uart_writel
drivers/tty/serial/bcm63xx_uart.c:412:24: sparse: sparse: too many arguments for function bcm_uart_writel
drivers/tty/serial/bcm63xx_uart.c:423:24: sparse: sparse: too many arguments for function bcm_uart_writel
drivers/tty/serial/bcm63xx_uart.c:429:24: sparse: sparse: too many arguments for function bcm_uart_writel
drivers/tty/serial/bcm63xx_uart.c:435:24: sparse: sparse: too many arguments for function bcm_uart_writel
drivers/tty/serial/bcm63xx_uart.c:442:24: sparse: sparse: too many arguments for function bcm_uart_writel
drivers/tty/serial/bcm63xx_uart.c:455:24: sparse: sparse: too many arguments for function bcm_uart_writel
drivers/tty/serial/bcm63xx_uart.c:514:24: sparse: sparse: too many arguments for function bcm_uart_writel
drivers/tty/serial/bcm63xx_uart.c:519:24: sparse: sparse: too many arguments for function bcm_uart_writel
drivers/tty/serial/bcm63xx_uart.c:528:24: sparse: sparse: too many arguments for function bcm_uart_writel
vim +/for +428 drivers/tty/serial/rp2.c
7d9f49afa451d8 Kevin Cernekee 2013-01-16 427
f6f99189d77ea4 Jiri Slaby 2022-09-01 @428 static DEFINE_UART_PORT_TX_HELPER_LIMITED(rp2_tx_chars, port, ch,
f6f99189d77ea4 Jiri Slaby 2022-09-01 429 true,
f6f99189d77ea4 Jiri Slaby 2022-09-01 430 writeb(ch, port_to_up(port)->base + RP2_DATA_BYTE),
f6f99189d77ea4 Jiri Slaby 2022-09-01 431 ({}));
7d9f49afa451d8 Kevin Cernekee 2013-01-16 432
7d9f49afa451d8 Kevin Cernekee 2013-01-16 433 static void rp2_ch_interrupt(struct rp2_uart_port *up)
7d9f49afa451d8 Kevin Cernekee 2013-01-16 434 {
7d9f49afa451d8 Kevin Cernekee 2013-01-16 435 u32 status;
7d9f49afa451d8 Kevin Cernekee 2013-01-16 436
7d9f49afa451d8 Kevin Cernekee 2013-01-16 437 spin_lock(&up->port.lock);
7d9f49afa451d8 Kevin Cernekee 2013-01-16 438
7d9f49afa451d8 Kevin Cernekee 2013-01-16 439 /*
7d9f49afa451d8 Kevin Cernekee 2013-01-16 440 * The IRQ status bits are clear-on-write. Other status bits in
7d9f49afa451d8 Kevin Cernekee 2013-01-16 441 * this register aren't, so it's harmless to write to them.
7d9f49afa451d8 Kevin Cernekee 2013-01-16 442 */
7d9f49afa451d8 Kevin Cernekee 2013-01-16 443 status = readl(up->base + RP2_CHAN_STAT);
7d9f49afa451d8 Kevin Cernekee 2013-01-16 444 writel(status, up->base + RP2_CHAN_STAT);
7d9f49afa451d8 Kevin Cernekee 2013-01-16 445
7d9f49afa451d8 Kevin Cernekee 2013-01-16 446 if (status & RP2_CHAN_STAT_RXDATA_m)
7d9f49afa451d8 Kevin Cernekee 2013-01-16 447 rp2_rx_chars(up);
7d9f49afa451d8 Kevin Cernekee 2013-01-16 448 if (status & RP2_CHAN_STAT_TXEMPTY_m)
f6f99189d77ea4 Jiri Slaby 2022-09-01 @449 rp2_tx_chars(&up->port,
f6f99189d77ea4 Jiri Slaby 2022-09-01 450 FIFO_SIZE - readw(up->base + RP2_TX_FIFO_COUNT));
7d9f49afa451d8 Kevin Cernekee 2013-01-16 451 if (status & RP2_CHAN_STAT_MS_CHANGED_MASK)
7d9f49afa451d8 Kevin Cernekee 2013-01-16 452 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
7d9f49afa451d8 Kevin Cernekee 2013-01-16 453
7d9f49afa451d8 Kevin Cernekee 2013-01-16 454 spin_unlock(&up->port.lock);
7d9f49afa451d8 Kevin Cernekee 2013-01-16 455 }
7d9f49afa451d8 Kevin Cernekee 2013-01-16 456
--
0-DAY CI Kernel Test Service
https://01.org/lkp
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 3/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
@ 2022-09-01 21:42 kernel test robot
0 siblings, 0 replies; 29+ messages in thread
From: kernel test robot @ 2022-09-01 21:42 UTC (permalink / raw)
To: kbuild
[-- Attachment #1: Type: text/plain, Size: 7880 bytes --]
::::::
:::::: Manual check reason: "low confidence static check warning: drivers/tty/serial/amba-pl010.c:165:8: sparse: int static [signed] [toplevel] writel( ... )"
::::::
BCC: lkp(a)intel.com
CC: kbuild-all(a)lists.01.org
In-Reply-To: <20220901110657.3305-4-jslaby@suse.cz>
References: <20220901110657.3305-4-jslaby@suse.cz>
TO: Jiri Slaby <jslaby@suse.cz>
Hi Jiri,
I love your patch! Perhaps something to improve:
[auto build test WARNING on tty/tty-testing]
[also build test WARNING on usb/usb-testing linus/master v6.0-rc3 next-20220901]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Jiri-Slaby/tty-TX-helpers/20220901-190806
base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-testing
:::::: branch date: 10 hours ago
:::::: commit date: 10 hours ago
config: arm64-randconfig-s031-20220901 (https://download.01.org/0day-ci/archive/20220902/202209020540.2UiHK5pS-lkp(a)intel.com/config)
compiler: aarch64-linux-gcc (GCC) 12.1.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-39-gce1a6720-dirty
# https://github.com/intel-lab-lkp/linux/commit/f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Jiri-Slaby/tty-TX-helpers/20220901-190806
git checkout f6f99189d77ea45bc72efe7393bb91f4eb46a2fb
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/tty/serial/
If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got __VA_OPT__
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ;
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Trying to use reserved word 'for' as identifier
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got &&
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in nested declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got --
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ->
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ->
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Trying to use reserved word 'continue' as identifier
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got }
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ->
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at end of declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ->
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got }
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got <
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ) in function declarator
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got ==
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Trying to use reserved word 'if' as identifier
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ; at the end of type declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got }
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: Expected ;@the end of type declaration
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: got }
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: symbol 'writel' redeclared with different type (incompatible argument 1 (different base types)):
>> drivers/tty/serial/amba-pl010.c:165:8: sparse: int static [signed] [toplevel] writel( ... )
drivers/tty/serial/amba-pl010.c: note: in included file (through arch/arm64/include/asm/io.h, include/linux/scatterlist.h, include/linux/kfifo.h, ...):
include/asm-generic/io.h:273:20: sparse: note: previously declared as:
include/asm-generic/io.h:273:20: sparse: void static inline [gnu_inline] [toplevel] writel( ... )
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: undefined identifier 'xmit'
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: symbol 'ch' redeclared with different type (different type sizes):
drivers/tty/serial/amba-pl010.c:165:8: sparse: int [addressable] [toplevel] ch
drivers/tty/serial/amba-pl010.c:165:8: sparse: note: previously declared as:
drivers/tty/serial/amba-pl010.c:165:8: sparse: unsigned char [addressable] [toplevel] [usertype] ch
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: symbol 'writel' redeclared with different type (incompatible argument 1 (different base types)):
>> drivers/tty/serial/amba-pl010.c:165:8: sparse: int static [signed] [toplevel] writel( ... )
include/asm-generic/io.h:273:20: sparse: note: previously declared as:
include/asm-generic/io.h:273:20: sparse: void static inline [gnu_inline] [toplevel] writel( ... )
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: cannot dereference this type
drivers/tty/serial/amba-pl010.c:165:8: sparse: sparse: symbol 'pending' redeclared with different type (different signedness):
drivers/tty/serial/amba-pl010.c:165:8: sparse: int [addressable] [toplevel] pending
drivers/tty/serial/amba-pl010.c:165:8: sparse: note: previously declared as:
drivers/tty/serial/amba-pl010.c:165:8: sparse: unsigned int [addressable] [toplevel] pending
drivers/tty/serial/amba-pl010.c:214:47: sparse: sparse: too many arguments for function pl010_tx_chars
vim +165 drivers/tty/serial/amba-pl010.c
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 164
f6f99189d77ea4 drivers/tty/serial/amba-pl010.c Jiri Slaby 2022-09-01 @165 static DEFINE_UART_PORT_TX_HELPER_LIMITED(pl010_tx_chars, port, ch,
f6f99189d77ea4 drivers/tty/serial/amba-pl010.c Jiri Slaby 2022-09-01 166 true,
f6f99189d77ea4 drivers/tty/serial/amba-pl010.c Jiri Slaby 2022-09-01 167 writel(ch, port->membase + UART01x_DR),
f6f99189d77ea4 drivers/tty/serial/amba-pl010.c Jiri Slaby 2022-09-01 168 ({}));
^1da177e4c3f41 drivers/serial/amba-pl010.c Linus Torvalds 2005-04-16 169
--
0-DAY CI Kernel Test Service
https://01.org/lkp
^ permalink raw reply [flat|nested] 29+ messages in thread
end of thread, other threads:[~2022-09-06 10:53 UTC | newest]
Thread overview: 29+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-01 11:06 [PATCH v2 0/3] tty: TX helpers Jiri Slaby
2022-09-01 11:06 ` Jiri Slaby
2022-09-01 11:06 ` [PATCH v2 1/3] tty: serial: introduce transmit helper generators Jiri Slaby
2022-09-01 12:25 ` Greg KH
2022-09-02 5:16 ` Jiri Slaby
2022-09-02 5:23 ` Greg KH
2022-09-02 8:02 ` Jiri Slaby
2022-09-02 10:22 ` Ilpo Järvinen
2022-09-02 10:24 ` Jiri Slaby
2022-09-01 11:06 ` [PATCH v2 2/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER() Jiri Slaby
2022-09-02 14:21 ` Ilpo Järvinen
2022-09-06 10:50 ` Jiri Slaby
2022-09-01 11:06 ` [PATCH v2 3/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED() Jiri Slaby
2022-09-01 11:06 ` Jiri Slaby
2022-09-02 14:56 ` Ilpo Järvinen
2022-09-02 14:56 ` Ilpo Järvinen
2022-09-01 21:42 kernel test robot
2022-09-01 22:43 kernel test robot
2022-09-01 23:45 kernel test robot
2022-09-01 23:55 kernel test robot
2022-09-02 0:56 kernel test robot
2022-09-02 2:19 kernel test robot
2022-09-02 3:47 kernel test robot
2022-09-02 6:54 kernel test robot
2022-09-02 11:53 kernel test robot
2022-09-02 19:46 kernel test robot
2022-09-03 2:15 kernel test robot
2022-09-03 2:47 kernel test robot
2022-09-04 13:51 kernel test robot
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.