From: Allen-KH Cheng <allen-kh.cheng@mediatek.com> To: Lee Jones <lee@kernel.org>, Matthias Brugger <matthias.bgg@gmail.com>, "Rob Herring" <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: <Project_Global_Chrome_Upstream_Group@mediatek.com>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, <linux-mediatek@lists.infradead.org>, <hsinyi@chromium.org>, Allen-KH Cheng <allen-kh.cheng@mediatek.com> Subject: [PATCH 4/5] arm64: dts: mt8186: Add dpi node Date: Fri, 23 Sep 2022 21:11:47 +0800 [thread overview] Message-ID: <20220923131148.6678-5-allen-kh.cheng@mediatek.com> (raw) In-Reply-To: <20220923131148.6678-1-allen-kh.cheng@mediatek.com> Add dpi node for mt8186 SoC. Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> --- arch/arm64/boot/dts/mediatek/mt8186.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi index 68f06bef88f3..c6809fdc7d15 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi @@ -976,6 +976,25 @@ power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; }; + dsi0: dsi@14013000 { + compatible = "mediatek,mt8186-dsi"; + reg = <0 0x14013000 0 0x1000>; + power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; + interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&mmsys CLK_MM_DSI0>, + <&mmsys CLK_MM_DSI0_DSI_CK_DOMAIN>, + <&mipi_tx0>; + clock-names = "engine", "digital", "hs"; + resets = <&mmsys MT8186_MMSYS_SW0_RST_B_DISP_DSI0>; + phys = <&mipi_tx0>; + phy-names = "dphy"; + status = "disabled"; + + port { + dsi_out: endpoint { }; + }; + }; + iommu_mm: iommu@14016000 { compatible = "mediatek,mt8186-iommu-mm"; reg = <0 0x14016000 0 0x1000>; -- 2.18.0
WARNING: multiple messages have this Message-ID (diff)
From: Allen-KH Cheng <allen-kh.cheng@mediatek.com> To: Lee Jones <lee@kernel.org>, Matthias Brugger <matthias.bgg@gmail.com>, "Rob Herring" <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: <Project_Global_Chrome_Upstream_Group@mediatek.com>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, <linux-mediatek@lists.infradead.org>, <hsinyi@chromium.org>, Allen-KH Cheng <allen-kh.cheng@mediatek.com> Subject: [PATCH 4/5] arm64: dts: mt8186: Add dpi node Date: Fri, 23 Sep 2022 21:11:47 +0800 [thread overview] Message-ID: <20220923131148.6678-5-allen-kh.cheng@mediatek.com> (raw) In-Reply-To: <20220923131148.6678-1-allen-kh.cheng@mediatek.com> Add dpi node for mt8186 SoC. Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> --- arch/arm64/boot/dts/mediatek/mt8186.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi index 68f06bef88f3..c6809fdc7d15 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi @@ -976,6 +976,25 @@ power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; }; + dsi0: dsi@14013000 { + compatible = "mediatek,mt8186-dsi"; + reg = <0 0x14013000 0 0x1000>; + power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; + interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&mmsys CLK_MM_DSI0>, + <&mmsys CLK_MM_DSI0_DSI_CK_DOMAIN>, + <&mipi_tx0>; + clock-names = "engine", "digital", "hs"; + resets = <&mmsys MT8186_MMSYS_SW0_RST_B_DISP_DSI0>; + phys = <&mipi_tx0>; + phy-names = "dphy"; + status = "disabled"; + + port { + dsi_out: endpoint { }; + }; + }; + iommu_mm: iommu@14016000 { compatible = "mediatek,mt8186-iommu-mm"; reg = <0 0x14016000 0 0x1000>; -- 2.18.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-23 13:12 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-09-23 13:11 [PATCH 0/5] Add some driver nodes for MT8186 SoC Allen-KH Cheng 2022-09-23 13:11 ` Allen-KH Cheng 2022-09-23 13:11 ` [PATCH 1/5] dt-bindings: mfd: mediatek: Add scpsys compatible for mt8186 Allen-KH Cheng 2022-09-23 13:11 ` Allen-KH Cheng 2022-09-23 17:47 ` Krzysztof Kozlowski 2022-09-23 17:47 ` Krzysztof Kozlowski 2022-09-26 7:48 ` Lee Jones 2022-09-26 7:48 ` Lee Jones 2022-09-23 13:11 ` [PATCH 2/5] arm64: dts: mt8186: Add power domains controller Allen-KH Cheng 2022-09-23 13:11 ` Allen-KH Cheng 2022-09-27 13:47 ` AngeloGioacchino Del Regno 2022-09-27 13:47 ` AngeloGioacchino Del Regno 2022-09-23 13:11 ` [PATCH 3/5] arm64: dts: mt8186: Add IOMMU and SMI nodes Allen-KH Cheng 2022-09-23 13:11 ` Allen-KH Cheng 2022-09-27 13:40 ` AngeloGioacchino Del Regno 2022-09-27 13:40 ` AngeloGioacchino Del Regno 2022-09-27 13:53 ` Allen-KH Cheng (程冠勳) 2022-09-27 13:53 ` Allen-KH Cheng (程冠勳) 2022-09-23 13:11 ` Allen-KH Cheng [this message] 2022-09-23 13:11 ` [PATCH 4/5] arm64: dts: mt8186: Add dpi node Allen-KH Cheng 2022-09-23 13:11 ` [PATCH 5/5] arm64: dts: mt8186: Add xhci nodes Allen-KH Cheng 2022-09-23 13:11 ` Allen-KH Cheng 2022-09-27 13:48 ` AngeloGioacchino Del Regno 2022-09-27 13:48 ` AngeloGioacchino Del Regno
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220923131148.6678-5-allen-kh.cheng@mediatek.com \ --to=allen-kh.cheng@mediatek.com \ --cc=Project_Global_Chrome_Upstream_Group@mediatek.com \ --cc=devicetree@vger.kernel.org \ --cc=hsinyi@chromium.org \ --cc=krzysztof.kozlowski@linaro.org \ --cc=lee@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mediatek@lists.infradead.org \ --cc=matthias.bgg@gmail.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.