* [RFC PATCH v1 0/3] SPL NVMe support @ 2022-09-29 9:56 Mayuresh Chitale 2022-09-29 9:56 ` [RFC PATCH v1 1/3] spl: Add Kconfig options for NVME Mayuresh Chitale ` (2 more replies) 0 siblings, 3 replies; 9+ messages in thread From: Mayuresh Chitale @ 2022-09-29 9:56 UTC (permalink / raw) To: Bin Meng, Simon Glass Cc: Mayuresh Chitale, u-boot, Heinrich Schuchardt, Rick Chen, Leo This patchset adds support to load images of the SPL's next booting stage from a NVMe device. Mayuresh Chitale (3): spl: Add Kconfig options for NVME nvme: pci: Enable for SPL common: spl: Add spl NVMe boot support arch/riscv/include/asm/spl.h | 1 + common/spl/Kconfig | 25 ++++++++++++++++++++ common/spl/Makefile | 1 + common/spl/spl_nvme.c | 44 ++++++++++++++++++++++++++++++++++++ drivers/Makefile | 2 +- drivers/nvme/Makefile | 2 +- drivers/nvme/nvme_pci.c | 1 + drivers/pci/Kconfig | 7 ++++++ drivers/pci/pci-uclass.c | 3 ++- 9 files changed, 83 insertions(+), 3 deletions(-) create mode 100644 common/spl/spl_nvme.c -- 2.25.1 ^ permalink raw reply [flat|nested] 9+ messages in thread
* [RFC PATCH v1 1/3] spl: Add Kconfig options for NVME 2022-09-29 9:56 [RFC PATCH v1 0/3] SPL NVMe support Mayuresh Chitale @ 2022-09-29 9:56 ` Mayuresh Chitale 2022-09-29 23:55 ` Simon Glass 2022-09-29 9:56 ` [RFC PATCH v1 2/3] nvme: pci: Enable for SPL Mayuresh Chitale 2022-09-29 9:56 ` [RFC PATCH v1 3/3] common: spl: Add spl NVMe boot support Mayuresh Chitale 2 siblings, 1 reply; 9+ messages in thread From: Mayuresh Chitale @ 2022-09-29 9:56 UTC (permalink / raw) To: Bin Meng, Simon Glass Cc: Mayuresh Chitale, u-boot, Heinrich Schuchardt, Rick Chen, Leo This patch adds options to enable PCI NVMe support in SPL Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> --- common/spl/Kconfig | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 70d97815f0..2bc97421f9 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -1218,6 +1218,31 @@ config SPL_SATA expense and power consumption. This enables loading from SATA using a configured device. +config SPL_NVME + bool "NVM Express device support" + depends on BLK + select HAVE_BLOCK_DEVICE + help + This option enables support for NVM Express devices. + It supports basic functions of NVMe (read/write). + +config SPL_NVME_PCI + bool "NVM Express PCI device support for SPL" + depends on SPL_PCI && SPL_NVME + help + This option enables support for NVM Express PCI devices. + This allows use of NVMe devices for loading u-boot. + +config SPL_NVME_BOOT_DEVICE + hex "NVMe boot device number" + depends on SPL_NVME + default 0x0 + +config SYS_NVME_FAT_BOOT_PARTITION + hex "NVMe boot partition number" + depends on SPL_NVME + default 0x1 + config SPL_SATA_RAW_U_BOOT_USE_SECTOR bool "SATA raw mode: by sector" depends on SPL_SATA -- 2.25.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [RFC PATCH v1 1/3] spl: Add Kconfig options for NVME 2022-09-29 9:56 ` [RFC PATCH v1 1/3] spl: Add Kconfig options for NVME Mayuresh Chitale @ 2022-09-29 23:55 ` Simon Glass 0 siblings, 0 replies; 9+ messages in thread From: Simon Glass @ 2022-09-29 23:55 UTC (permalink / raw) To: Mayuresh Chitale Cc: Bin Meng, U-Boot Mailing List, Heinrich Schuchardt, Rick Chen, Leo On Thu, 29 Sept 2022 at 03:57, Mayuresh Chitale <mchitale@ventanamicro.com> wrote: > > This patch adds options to enable PCI NVMe support in SPL > > Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> > --- > common/spl/Kconfig | 25 +++++++++++++++++++++++++ > 1 file changed, 25 insertions(+) Reviewed-by: Simon Glass <sjg@chromium.org> ^ permalink raw reply [flat|nested] 9+ messages in thread
* [RFC PATCH v1 2/3] nvme: pci: Enable for SPL 2022-09-29 9:56 [RFC PATCH v1 0/3] SPL NVMe support Mayuresh Chitale 2022-09-29 9:56 ` [RFC PATCH v1 1/3] spl: Add Kconfig options for NVME Mayuresh Chitale @ 2022-09-29 9:56 ` Mayuresh Chitale 2022-09-29 23:55 ` Simon Glass 2022-09-29 9:56 ` [RFC PATCH v1 3/3] common: spl: Add spl NVMe boot support Mayuresh Chitale 2 siblings, 1 reply; 9+ messages in thread From: Mayuresh Chitale @ 2022-09-29 9:56 UTC (permalink / raw) To: Bin Meng, Simon Glass Cc: Mayuresh Chitale, u-boot, Heinrich Schuchardt, Rick Chen, Leo Build PCI NVMe driver when enabled for SPI and enable dm-pre-reloc for the driver. Also enable PCI_PNP for SPL which is required to auto configure the PCIe devices. Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> --- drivers/Makefile | 2 +- drivers/nvme/Makefile | 2 +- drivers/nvme/nvme_pci.c | 1 + drivers/pci/Kconfig | 7 +++++++ drivers/pci/pci-uclass.c | 3 ++- 5 files changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/Makefile b/drivers/Makefile index eba9940231..581ae9f819 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/ obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/ obj-$(CONFIG_$(SPL_)SYSINFO) += sysinfo/ obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/ +obj-$(CONFIG_$(SPL_)NVME) += nvme/ obj-$(CONFIG_XEN) += xen/ obj-$(CONFIG_$(SPL_)FPGA) += fpga/ @@ -86,7 +87,6 @@ obj-y += crypto/ obj-$(CONFIG_FASTBOOT) += fastboot/ obj-y += misc/ obj-$(CONFIG_MMC) += mmc/ -obj-$(CONFIG_NVME) += nvme/ obj-$(CONFIG_PCI_ENDPOINT) += pci_endpoint/ obj-y += dfu/ obj-$(CONFIG_PCH) += pch/ diff --git a/drivers/nvme/Makefile b/drivers/nvme/Makefile index fa7b619446..fd3e68a91d 100644 --- a/drivers/nvme/Makefile +++ b/drivers/nvme/Makefile @@ -4,4 +4,4 @@ obj-y += nvme-uclass.o nvme.o nvme_show.o obj-$(CONFIG_NVME_APPLE) += nvme_apple.o -obj-$(CONFIG_NVME_PCI) += nvme_pci.o +obj-$(CONFIG_$(SPL_)NVME_PCI) += nvme_pci.o diff --git a/drivers/nvme/nvme_pci.c b/drivers/nvme/nvme_pci.c index 36bf9c5ffb..16d8b9fff7 100644 --- a/drivers/nvme/nvme_pci.c +++ b/drivers/nvme/nvme_pci.c @@ -39,6 +39,7 @@ U_BOOT_DRIVER(nvme) = { .bind = nvme_bind, .probe = nvme_probe, .priv_auto = sizeof(struct nvme_dev), + .flags = DM_FLAG_PRE_RELOC, }; struct pci_device_id nvme_supported[] = { diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 22f4995453..2d4c9f0781 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -40,6 +40,13 @@ config PCI_PNP help Enable PCI memory and I/O space resource allocation and assignment. +config SPL_PCI_PNP + bool "Enable Plug & Play support for PCI" + default n + help + Enable PCI memory and I/O space resource allocation and assignment. + This is required to auto configure the enumerated devices. + config PCI_REGION_MULTI_ENTRY bool "Enable Multiple entries of region type MEMORY in ranges for PCI" help diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c index 16a6a699f9..62d2409a6d 100644 --- a/drivers/pci/pci-uclass.c +++ b/drivers/pci/pci-uclass.c @@ -1140,7 +1140,8 @@ static int pci_uclass_post_probe(struct udevice *bus) if (ret) return log_msg_ret("bind", ret); - if (CONFIG_IS_ENABLED(PCI_PNP) && ll_boot_init() && + if ((CONFIG_IS_ENABLED(PCI_PNP) || CONFIG_IS_ENABLED(SPL_PCI_PNP)) && + ll_boot_init() && (!hose->skip_auto_config_until_reloc || (gd->flags & GD_FLG_RELOC))) { ret = pci_auto_config_devices(bus); -- 2.25.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [RFC PATCH v1 2/3] nvme: pci: Enable for SPL 2022-09-29 9:56 ` [RFC PATCH v1 2/3] nvme: pci: Enable for SPL Mayuresh Chitale @ 2022-09-29 23:55 ` Simon Glass 2022-09-30 16:58 ` Mayuresh Chitale 0 siblings, 1 reply; 9+ messages in thread From: Simon Glass @ 2022-09-29 23:55 UTC (permalink / raw) To: Mayuresh Chitale Cc: Bin Meng, U-Boot Mailing List, Heinrich Schuchardt, Rick Chen, Leo Hi Mayuresh, On Thu, 29 Sept 2022 at 03:57, Mayuresh Chitale <mchitale@ventanamicro.com> wrote: > > Build PCI NVMe driver when enabled for SPI and enable dm-pre-reloc for > the driver. Also enable PCI_PNP for SPL which is required to auto > configure the PCIe devices. > > Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> > --- > drivers/Makefile | 2 +- > drivers/nvme/Makefile | 2 +- > drivers/nvme/nvme_pci.c | 1 + > drivers/pci/Kconfig | 7 +++++++ > drivers/pci/pci-uclass.c | 3 ++- > 5 files changed, 12 insertions(+), 3 deletions(-) > > diff --git a/drivers/Makefile b/drivers/Makefile > index eba9940231..581ae9f819 100644 > --- a/drivers/Makefile > +++ b/drivers/Makefile > @@ -34,6 +34,7 @@ obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/ > obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/ > obj-$(CONFIG_$(SPL_)SYSINFO) += sysinfo/ > obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/ > +obj-$(CONFIG_$(SPL_)NVME) += nvme/ > obj-$(CONFIG_XEN) += xen/ > obj-$(CONFIG_$(SPL_)FPGA) += fpga/ > > @@ -86,7 +87,6 @@ obj-y += crypto/ > obj-$(CONFIG_FASTBOOT) += fastboot/ > obj-y += misc/ > obj-$(CONFIG_MMC) += mmc/ > -obj-$(CONFIG_NVME) += nvme/ > obj-$(CONFIG_PCI_ENDPOINT) += pci_endpoint/ > obj-y += dfu/ > obj-$(CONFIG_PCH) += pch/ > diff --git a/drivers/nvme/Makefile b/drivers/nvme/Makefile > index fa7b619446..fd3e68a91d 100644 > --- a/drivers/nvme/Makefile > +++ b/drivers/nvme/Makefile > @@ -4,4 +4,4 @@ > > obj-y += nvme-uclass.o nvme.o nvme_show.o > obj-$(CONFIG_NVME_APPLE) += nvme_apple.o > -obj-$(CONFIG_NVME_PCI) += nvme_pci.o > +obj-$(CONFIG_$(SPL_)NVME_PCI) += nvme_pci.o > diff --git a/drivers/nvme/nvme_pci.c b/drivers/nvme/nvme_pci.c > index 36bf9c5ffb..16d8b9fff7 100644 > --- a/drivers/nvme/nvme_pci.c > +++ b/drivers/nvme/nvme_pci.c > @@ -39,6 +39,7 @@ U_BOOT_DRIVER(nvme) = { > .bind = nvme_bind, > .probe = nvme_probe, > .priv_auto = sizeof(struct nvme_dev), > + .flags = DM_FLAG_PRE_RELOC, Why is this here? It is only applicable on some boards. Instead, add the appropriate tag (e.g. u-boot,dm-spl) to the device node. > }; > > struct pci_device_id nvme_supported[] = { > diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig > index 22f4995453..2d4c9f0781 100644 > --- a/drivers/pci/Kconfig > +++ b/drivers/pci/Kconfig > @@ -40,6 +40,13 @@ config PCI_PNP > help > Enable PCI memory and I/O space resource allocation and assignment. > > +config SPL_PCI_PNP > + bool "Enable Plug & Play support for PCI" > + default n > + help > + Enable PCI memory and I/O space resource allocation and assignment. > + This is required to auto configure the enumerated devices. > + > config PCI_REGION_MULTI_ENTRY > bool "Enable Multiple entries of region type MEMORY in ranges for PCI" > help > diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c > index 16a6a699f9..62d2409a6d 100644 > --- a/drivers/pci/pci-uclass.c > +++ b/drivers/pci/pci-uclass.c > @@ -1140,7 +1140,8 @@ static int pci_uclass_post_probe(struct udevice *bus) > if (ret) > return log_msg_ret("bind", ret); > > - if (CONFIG_IS_ENABLED(PCI_PNP) && ll_boot_init() && > + if ((CONFIG_IS_ENABLED(PCI_PNP) || CONFIG_IS_ENABLED(SPL_PCI_PNP)) && > + ll_boot_init() && > (!hose->skip_auto_config_until_reloc || > (gd->flags & GD_FLG_RELOC))) { > ret = pci_auto_config_devices(bus); > -- > 2.25.1 > Regards, Simon ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [RFC PATCH v1 2/3] nvme: pci: Enable for SPL 2022-09-29 23:55 ` Simon Glass @ 2022-09-30 16:58 ` Mayuresh Chitale 2022-09-30 23:49 ` Simon Glass 0 siblings, 1 reply; 9+ messages in thread From: Mayuresh Chitale @ 2022-09-30 16:58 UTC (permalink / raw) To: Simon Glass Cc: Bin Meng, U-Boot Mailing List, Heinrich Schuchardt, Rick Chen, Leo Hi Simon, On Fri, Sep 30, 2022 at 5:26 AM Simon Glass <sjg@chromium.org> wrote: > Hi Mayuresh, > > On Thu, 29 Sept 2022 at 03:57, Mayuresh Chitale > <mchitale@ventanamicro.com> wrote: > > > > Build PCI NVMe driver when enabled for SPI and enable dm-pre-reloc for > > the driver. Also enable PCI_PNP for SPL which is required to auto > > configure the PCIe devices. > > > > Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> > > --- > > drivers/Makefile | 2 +- > > drivers/nvme/Makefile | 2 +- > > drivers/nvme/nvme_pci.c | 1 + > > drivers/pci/Kconfig | 7 +++++++ > > drivers/pci/pci-uclass.c | 3 ++- > > 5 files changed, 12 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/Makefile b/drivers/Makefile > > index eba9940231..581ae9f819 100644 > > --- a/drivers/Makefile > > +++ b/drivers/Makefile > > @@ -34,6 +34,7 @@ obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/ > > obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/ > > obj-$(CONFIG_$(SPL_)SYSINFO) += sysinfo/ > > obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/ > > +obj-$(CONFIG_$(SPL_)NVME) += nvme/ > > obj-$(CONFIG_XEN) += xen/ > > obj-$(CONFIG_$(SPL_)FPGA) += fpga/ > > > > @@ -86,7 +87,6 @@ obj-y += crypto/ > > obj-$(CONFIG_FASTBOOT) += fastboot/ > > obj-y += misc/ > > obj-$(CONFIG_MMC) += mmc/ > > -obj-$(CONFIG_NVME) += nvme/ > > obj-$(CONFIG_PCI_ENDPOINT) += pci_endpoint/ > > obj-y += dfu/ > > obj-$(CONFIG_PCH) += pch/ > > diff --git a/drivers/nvme/Makefile b/drivers/nvme/Makefile > > index fa7b619446..fd3e68a91d 100644 > > --- a/drivers/nvme/Makefile > > +++ b/drivers/nvme/Makefile > > @@ -4,4 +4,4 @@ > > > > obj-y += nvme-uclass.o nvme.o nvme_show.o > > obj-$(CONFIG_NVME_APPLE) += nvme_apple.o > > -obj-$(CONFIG_NVME_PCI) += nvme_pci.o > > +obj-$(CONFIG_$(SPL_)NVME_PCI) += nvme_pci.o > > diff --git a/drivers/nvme/nvme_pci.c b/drivers/nvme/nvme_pci.c > > index 36bf9c5ffb..16d8b9fff7 100644 > > --- a/drivers/nvme/nvme_pci.c > > +++ b/drivers/nvme/nvme_pci.c > > @@ -39,6 +39,7 @@ U_BOOT_DRIVER(nvme) = { > > .bind = nvme_bind, > > .probe = nvme_probe, > > .priv_auto = sizeof(struct nvme_dev), > > + .flags = DM_FLAG_PRE_RELOC, > > Why is this here? It is only applicable on some boards. > > Instead, add the appropriate tag (e.g. u-boot,dm-spl) to the device node. > I am not sure how that can be done for PCI devices as those would be probed at run time. Could you please point to any examples? Also, the pci_find_and_bind_driver function only checks for this flag in the drivers when binding the devices > > > }; > > > > struct pci_device_id nvme_supported[] = { > > diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig > > index 22f4995453..2d4c9f0781 100644 > > --- a/drivers/pci/Kconfig > > +++ b/drivers/pci/Kconfig > > @@ -40,6 +40,13 @@ config PCI_PNP > > help > > Enable PCI memory and I/O space resource allocation and > assignment. > > > > +config SPL_PCI_PNP > > + bool "Enable Plug & Play support for PCI" > > + default n > > + help > > + Enable PCI memory and I/O space resource allocation and > assignment. > > + This is required to auto configure the enumerated devices. > > + > > config PCI_REGION_MULTI_ENTRY > > bool "Enable Multiple entries of region type MEMORY in ranges > for PCI" > > help > > diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c > > index 16a6a699f9..62d2409a6d 100644 > > --- a/drivers/pci/pci-uclass.c > > +++ b/drivers/pci/pci-uclass.c > > @@ -1140,7 +1140,8 @@ static int pci_uclass_post_probe(struct udevice > *bus) > > if (ret) > > return log_msg_ret("bind", ret); > > > > - if (CONFIG_IS_ENABLED(PCI_PNP) && ll_boot_init() && > > + if ((CONFIG_IS_ENABLED(PCI_PNP) || > CONFIG_IS_ENABLED(SPL_PCI_PNP)) && > > + ll_boot_init() && > > (!hose->skip_auto_config_until_reloc || > > (gd->flags & GD_FLG_RELOC))) { > > ret = pci_auto_config_devices(bus); > > -- > > 2.25.1 > > > > Regards, > Simon > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [RFC PATCH v1 2/3] nvme: pci: Enable for SPL 2022-09-30 16:58 ` Mayuresh Chitale @ 2022-09-30 23:49 ` Simon Glass 0 siblings, 0 replies; 9+ messages in thread From: Simon Glass @ 2022-09-30 23:49 UTC (permalink / raw) To: Mayuresh Chitale Cc: Bin Meng, U-Boot Mailing List, Heinrich Schuchardt, Rick Chen, Leo Hi Mayuresh, On Fri, 30 Sept 2022 at 10:58, Mayuresh Chitale <mchitale@ventanamicro.com> wrote: > > Hi Simon, > > On Fri, Sep 30, 2022 at 5:26 AM Simon Glass <sjg@chromium.org> wrote: >> >> Hi Mayuresh, >> >> On Thu, 29 Sept 2022 at 03:57, Mayuresh Chitale >> <mchitale@ventanamicro.com> wrote: >> > >> > Build PCI NVMe driver when enabled for SPI and enable dm-pre-reloc for >> > the driver. Also enable PCI_PNP for SPL which is required to auto >> > configure the PCIe devices. >> > >> > Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> >> > --- >> > drivers/Makefile | 2 +- >> > drivers/nvme/Makefile | 2 +- >> > drivers/nvme/nvme_pci.c | 1 + >> > drivers/pci/Kconfig | 7 +++++++ >> > drivers/pci/pci-uclass.c | 3 ++- >> > 5 files changed, 12 insertions(+), 3 deletions(-) >> > >> > diff --git a/drivers/Makefile b/drivers/Makefile >> > index eba9940231..581ae9f819 100644 >> > --- a/drivers/Makefile >> > +++ b/drivers/Makefile >> > @@ -34,6 +34,7 @@ obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/ >> > obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/ >> > obj-$(CONFIG_$(SPL_)SYSINFO) += sysinfo/ >> > obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/ >> > +obj-$(CONFIG_$(SPL_)NVME) += nvme/ >> > obj-$(CONFIG_XEN) += xen/ >> > obj-$(CONFIG_$(SPL_)FPGA) += fpga/ >> > >> > @@ -86,7 +87,6 @@ obj-y += crypto/ >> > obj-$(CONFIG_FASTBOOT) += fastboot/ >> > obj-y += misc/ >> > obj-$(CONFIG_MMC) += mmc/ >> > -obj-$(CONFIG_NVME) += nvme/ >> > obj-$(CONFIG_PCI_ENDPOINT) += pci_endpoint/ >> > obj-y += dfu/ >> > obj-$(CONFIG_PCH) += pch/ >> > diff --git a/drivers/nvme/Makefile b/drivers/nvme/Makefile >> > index fa7b619446..fd3e68a91d 100644 >> > --- a/drivers/nvme/Makefile >> > +++ b/drivers/nvme/Makefile >> > @@ -4,4 +4,4 @@ >> > >> > obj-y += nvme-uclass.o nvme.o nvme_show.o >> > obj-$(CONFIG_NVME_APPLE) += nvme_apple.o >> > -obj-$(CONFIG_NVME_PCI) += nvme_pci.o >> > +obj-$(CONFIG_$(SPL_)NVME_PCI) += nvme_pci.o >> > diff --git a/drivers/nvme/nvme_pci.c b/drivers/nvme/nvme_pci.c >> > index 36bf9c5ffb..16d8b9fff7 100644 >> > --- a/drivers/nvme/nvme_pci.c >> > +++ b/drivers/nvme/nvme_pci.c >> > @@ -39,6 +39,7 @@ U_BOOT_DRIVER(nvme) = { >> > .bind = nvme_bind, >> > .probe = nvme_probe, >> > .priv_auto = sizeof(struct nvme_dev), >> > + .flags = DM_FLAG_PRE_RELOC, >> >> Why is this here? It is only applicable on some boards. >> >> Instead, add the appropriate tag (e.g. u-boot,dm-spl) to the device node. > > > I am not sure how that can be done for PCI devices as those would be probed at run time. Could you please point to any examples? Also, the pci_find_and_bind_driver function only checks for this flag in the drivers when binding the devices See host-bridge@0,0 in chromebook_coral.dts for an example of using the u-boot,dm-pre-reloc flag. Note that pci_find_and_bind_driver() is only called if the device tree lacks anything. Which board is this for? Regards, Simon ^ permalink raw reply [flat|nested] 9+ messages in thread
* [RFC PATCH v1 3/3] common: spl: Add spl NVMe boot support 2022-09-29 9:56 [RFC PATCH v1 0/3] SPL NVMe support Mayuresh Chitale 2022-09-29 9:56 ` [RFC PATCH v1 1/3] spl: Add Kconfig options for NVME Mayuresh Chitale 2022-09-29 9:56 ` [RFC PATCH v1 2/3] nvme: pci: Enable for SPL Mayuresh Chitale @ 2022-09-29 9:56 ` Mayuresh Chitale 2022-09-29 23:55 ` Simon Glass 2 siblings, 1 reply; 9+ messages in thread From: Mayuresh Chitale @ 2022-09-29 9:56 UTC (permalink / raw) To: Bin Meng, Simon Glass Cc: Mayuresh Chitale, u-boot, Heinrich Schuchardt, Rick Chen, Leo Add spl_nvme to read a fat partition from a bootable NVMe device. Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> --- arch/riscv/include/asm/spl.h | 1 + common/spl/Makefile | 1 + common/spl/spl_nvme.c | 44 ++++++++++++++++++++++++++++++++++++ 3 files changed, 46 insertions(+) create mode 100644 common/spl/spl_nvme.c diff --git a/arch/riscv/include/asm/spl.h b/arch/riscv/include/asm/spl.h index e8a94fcb1f..5d0ba4b034 100644 --- a/arch/riscv/include/asm/spl.h +++ b/arch/riscv/include/asm/spl.h @@ -20,6 +20,7 @@ enum { BOOT_DEVICE_SPI, BOOT_DEVICE_USB, BOOT_DEVICE_SATA, + BOOT_DEVICE_NVME, BOOT_DEVICE_I2C, BOOT_DEVICE_BOARD, BOOT_DEVICE_DFU, diff --git a/common/spl/Makefile b/common/spl/Makefile index 13db3df993..4bcc3d7e68 100644 --- a/common/spl/Makefile +++ b/common/spl/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_$(SPL_TPL_)USB_STORAGE) += spl_usb.o obj-$(CONFIG_$(SPL_TPL_)FS_FAT) += spl_fat.o obj-$(CONFIG_$(SPL_TPL_)FS_EXT4) += spl_ext.o obj-$(CONFIG_$(SPL_TPL_)SATA) += spl_sata.o +obj-$(CONFIG_$(SPL_TPL_)NVME) += spl_nvme.o obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += spl_semihosting.o obj-$(CONFIG_$(SPL_TPL_)DFU) += spl_dfu.o obj-$(CONFIG_$(SPL_TPL_)SPI_LOAD) += spl_spi.o diff --git a/common/spl/spl_nvme.c b/common/spl/spl_nvme.c new file mode 100644 index 0000000000..d8a9dba845 --- /dev/null +++ b/common/spl/spl_nvme.c @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2022 + * Ventana Micro Systems Inc. + * + * Derived work from spl_sata.c + */ + +#include <common.h> +#include <spl.h> +#include <errno.h> +#include <fat.h> +#include <nvme.h> +#include <init.h> + +static int spl_nvme_load_image(struct spl_image_info *spl_image, + struct spl_boot_device *bootdev) +{ + int ret; + struct blk_desc *blk_desc; + + ret = pci_init(); + if (ret < 0) + goto out; + + ret = nvme_scan_namespace(); + if (ret < 0) + goto out; + + blk_show_device(IF_TYPE_NVME, CONFIG_SPL_NVME_BOOT_DEVICE); + blk_desc = blk_get_devnum_by_type(IF_TYPE_NVME, + CONFIG_SPL_NVME_BOOT_DEVICE); + if (IS_ENABLED(CONFIG_SPL_FS_FAT)) + ret = spl_load_image_fat(spl_image, bootdev, blk_desc, + CONFIG_SYS_NVME_FAT_BOOT_PARTITION, + CONFIG_SPL_PAYLOAD); + else + ret = -ENOSYS; + +out: + return ret; +} + +SPL_LOAD_IMAGE_METHOD("NVME", 0, BOOT_DEVICE_NVME, spl_nvme_load_image); -- 2.25.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [RFC PATCH v1 3/3] common: spl: Add spl NVMe boot support 2022-09-29 9:56 ` [RFC PATCH v1 3/3] common: spl: Add spl NVMe boot support Mayuresh Chitale @ 2022-09-29 23:55 ` Simon Glass 0 siblings, 0 replies; 9+ messages in thread From: Simon Glass @ 2022-09-29 23:55 UTC (permalink / raw) To: Mayuresh Chitale Cc: Bin Meng, U-Boot Mailing List, Heinrich Schuchardt, Rick Chen, Leo Hi Mayuresh, On Thu, 29 Sept 2022 at 03:57, Mayuresh Chitale <mchitale@ventanamicro.com> wrote: > > Add spl_nvme to read a fat partition from a bootable NVMe device. > > Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> > --- > arch/riscv/include/asm/spl.h | 1 + > common/spl/Makefile | 1 + > common/spl/spl_nvme.c | 44 ++++++++++++++++++++++++++++++++++++ > 3 files changed, 46 insertions(+) > create mode 100644 common/spl/spl_nvme.c Reviewed-by: Simon Glass <sjg@chromium.org> (but see below) > > diff --git a/arch/riscv/include/asm/spl.h b/arch/riscv/include/asm/spl.h > index e8a94fcb1f..5d0ba4b034 100644 > --- a/arch/riscv/include/asm/spl.h > +++ b/arch/riscv/include/asm/spl.h > @@ -20,6 +20,7 @@ enum { > BOOT_DEVICE_SPI, > BOOT_DEVICE_USB, > BOOT_DEVICE_SATA, > + BOOT_DEVICE_NVME, > BOOT_DEVICE_I2C, > BOOT_DEVICE_BOARD, > BOOT_DEVICE_DFU, > diff --git a/common/spl/Makefile b/common/spl/Makefile > index 13db3df993..4bcc3d7e68 100644 > --- a/common/spl/Makefile > +++ b/common/spl/Makefile > @@ -28,6 +28,7 @@ obj-$(CONFIG_$(SPL_TPL_)USB_STORAGE) += spl_usb.o > obj-$(CONFIG_$(SPL_TPL_)FS_FAT) += spl_fat.o > obj-$(CONFIG_$(SPL_TPL_)FS_EXT4) += spl_ext.o > obj-$(CONFIG_$(SPL_TPL_)SATA) += spl_sata.o > +obj-$(CONFIG_$(SPL_TPL_)NVME) += spl_nvme.o > obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += spl_semihosting.o > obj-$(CONFIG_$(SPL_TPL_)DFU) += spl_dfu.o > obj-$(CONFIG_$(SPL_TPL_)SPI_LOAD) += spl_spi.o > diff --git a/common/spl/spl_nvme.c b/common/spl/spl_nvme.c > new file mode 100644 > index 0000000000..d8a9dba845 > --- /dev/null > +++ b/common/spl/spl_nvme.c > @@ -0,0 +1,44 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2022 > + * Ventana Micro Systems Inc. > + * > + * Derived work from spl_sata.c > + */ > + > +#include <common.h> > +#include <spl.h> > +#include <errno.h> > +#include <fat.h> > +#include <nvme.h> > +#include <init.h> Should go above nvme.h > + > +static int spl_nvme_load_image(struct spl_image_info *spl_image, > + struct spl_boot_device *bootdev) > +{ > + int ret; > + struct blk_desc *blk_desc; > + > + ret = pci_init(); > + if (ret < 0) > + goto out; > + > + ret = nvme_scan_namespace(); > + if (ret < 0) > + goto out; > + > + blk_show_device(IF_TYPE_NVME, CONFIG_SPL_NVME_BOOT_DEVICE); > + blk_desc = blk_get_devnum_by_type(IF_TYPE_NVME, > + CONFIG_SPL_NVME_BOOT_DEVICE); I think we need to move this to device tree, but it is OK for now. > + if (IS_ENABLED(CONFIG_SPL_FS_FAT)) > + ret = spl_load_image_fat(spl_image, bootdev, blk_desc, > + CONFIG_SYS_NVME_FAT_BOOT_PARTITION, > + CONFIG_SPL_PAYLOAD); > + else > + ret = -ENOSYS; > + > +out: > + return ret; > +} > + > +SPL_LOAD_IMAGE_METHOD("NVME", 0, BOOT_DEVICE_NVME, spl_nvme_load_image); > -- > 2.25.1 > Regards, Simon ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2022-09-30 23:49 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-09-29 9:56 [RFC PATCH v1 0/3] SPL NVMe support Mayuresh Chitale 2022-09-29 9:56 ` [RFC PATCH v1 1/3] spl: Add Kconfig options for NVME Mayuresh Chitale 2022-09-29 23:55 ` Simon Glass 2022-09-29 9:56 ` [RFC PATCH v1 2/3] nvme: pci: Enable for SPL Mayuresh Chitale 2022-09-29 23:55 ` Simon Glass 2022-09-30 16:58 ` Mayuresh Chitale 2022-09-30 23:49 ` Simon Glass 2022-09-29 9:56 ` [RFC PATCH v1 3/3] common: spl: Add spl NVMe boot support Mayuresh Chitale 2022-09-29 23:55 ` Simon Glass
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.