* [PATCH v6 0/2] arm64: dts: qcom: add dts for sa8540p-ride board @ 2022-10-20 7:30 Parikshit Pareek 2022-10-20 7:30 ` [PATCH v6 1/2] dt-bindings: arm: qcom: Document additional sa8540p device Parikshit Pareek 2022-10-20 7:30 ` [PATCH v6 2/2] arm64: dts: qcom: add SA8540P ride(Qdrive-3) Parikshit Pareek 0 siblings, 2 replies; 10+ messages in thread From: Parikshit Pareek @ 2022-10-20 7:30 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski Cc: linux-arm-msm, devicetree, linux-kernel, Andrew Halaney, Shazad Hussain, Brian Masney, Johan Hovold, Parikshit Pareek This series introduces the Qualcomm sa8540p-ride automotive development board, also called as Qdrive-3 board. Change in v6: - Introduced the new dts for the board, rather than moving common nodes between this one and SA8295 ADP board into dtsi file(Bjorn) - Drop 'adp' term to imply it being unrelated with ADP board(Internal discussion with Bjorn) - Removed Acked-by(Krzysztof) tag in dt-binding document, due to content change. - Not including Reviewed-by(Krzysztof), because of the content change. Change in v5: - Moved the usb and ufs nodes from sa8540p-adp.dtsi file to respective board specific dts files: sa8295p-adp.dts and sa8540p-adp-ride.dts. Took inputs from Shazad Hussain in this regard(John) - Added more description of the board differences(John) - Not including Reviewed-by for Krzysztof, because of the new changes to be reviewed. - Removed Reported-by tag(John). Changes in v4: - Removed the ufs_card_hc node, as it is not mounted on Qdrive-3 board. - Removed usb_1 relared nodes, as usb1 doesn't have any port connected on Qdrive3 board. - Added Reported-by tag for Shazad(for ufs and usb_1 node removals) Changes in v3: - Added Acked-by tag (Krzysztof) - Renamed dtsi to sa8540p-adp.dtsi (John) - Removed copyright from sa8295-adp.dts and sa8295-adp.dtsi(John) - Added cover letter change in v2: - Make dt-binding patch as the first one in the patch set - Add , after year 2022, in the license header Initial version: - Move the common nodes to sa8540p-adp.dtsi, and create qrive-3 board specific file sa8540p-adp-ride.dts. Parikshit Pareek (2): dt-bindings: arm: qcom: Document additional sa8540p device arm64: dts: qcom: add SA8540P ride(Qdrive-3) .../devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 309 ++++++++++++++++++ 3 files changed, 311 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sa8540p-ride.dts -- 2.17.1 ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v6 1/2] dt-bindings: arm: qcom: Document additional sa8540p device 2022-10-20 7:30 [PATCH v6 0/2] arm64: dts: qcom: add dts for sa8540p-ride board Parikshit Pareek @ 2022-10-20 7:30 ` Parikshit Pareek 2022-10-20 13:46 ` Krzysztof Kozlowski 2022-10-20 16:33 ` Brian Masney 2022-10-20 7:30 ` [PATCH v6 2/2] arm64: dts: qcom: add SA8540P ride(Qdrive-3) Parikshit Pareek 1 sibling, 2 replies; 10+ messages in thread From: Parikshit Pareek @ 2022-10-20 7:30 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski Cc: linux-arm-msm, devicetree, linux-kernel, Andrew Halaney, Shazad Hussain, Brian Masney, Johan Hovold, Parikshit Pareek Add the qdrive3 ride device to the valid device compatibles found on the sa8540p platform. Signed-off-by: Parikshit Pareek <quic_ppareek@quicinc.com> --- Documentation/devicetree/bindings/arm/qcom.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 207e28260206..f12b1ff19337 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -687,6 +687,7 @@ properties: - items: - enum: - qcom,sa8295p-adp + - qcom,sa8540p-ride - const: qcom,sa8540p - items: -- 2.17.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v6 1/2] dt-bindings: arm: qcom: Document additional sa8540p device 2022-10-20 7:30 ` [PATCH v6 1/2] dt-bindings: arm: qcom: Document additional sa8540p device Parikshit Pareek @ 2022-10-20 13:46 ` Krzysztof Kozlowski 2022-10-20 16:33 ` Brian Masney 1 sibling, 0 replies; 10+ messages in thread From: Krzysztof Kozlowski @ 2022-10-20 13:46 UTC (permalink / raw) To: Parikshit Pareek, Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski Cc: linux-arm-msm, devicetree, linux-kernel, Andrew Halaney, Shazad Hussain, Brian Masney, Johan Hovold On 20/10/2022 03:30, Parikshit Pareek wrote: > Add the qdrive3 ride device to the valid device compatibles found on the > sa8540p platform. > > Signed-off-by: Parikshit Pareek <quic_ppareek@quicinc.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v6 1/2] dt-bindings: arm: qcom: Document additional sa8540p device 2022-10-20 7:30 ` [PATCH v6 1/2] dt-bindings: arm: qcom: Document additional sa8540p device Parikshit Pareek 2022-10-20 13:46 ` Krzysztof Kozlowski @ 2022-10-20 16:33 ` Brian Masney 1 sibling, 0 replies; 10+ messages in thread From: Brian Masney @ 2022-10-20 16:33 UTC (permalink / raw) To: Parikshit Pareek Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel, Andrew Halaney, Shazad Hussain, Johan Hovold On Thu, Oct 20, 2022 at 01:00:35PM +0530, Parikshit Pareek wrote: > Add the qdrive3 ride device to the valid device compatibles found on the > sa8540p platform. > > Signed-off-by: Parikshit Pareek <quic_ppareek@quicinc.com> Reviewed-by: Brian Masney <bmasney@redhat.com> ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v6 2/2] arm64: dts: qcom: add SA8540P ride(Qdrive-3) 2022-10-20 7:30 [PATCH v6 0/2] arm64: dts: qcom: add dts for sa8540p-ride board Parikshit Pareek 2022-10-20 7:30 ` [PATCH v6 1/2] dt-bindings: arm: qcom: Document additional sa8540p device Parikshit Pareek @ 2022-10-20 7:30 ` Parikshit Pareek 2022-10-20 11:49 ` konrad.dybcio ` (2 more replies) 1 sibling, 3 replies; 10+ messages in thread From: Parikshit Pareek @ 2022-10-20 7:30 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski Cc: linux-arm-msm, devicetree, linux-kernel, Andrew Halaney, Shazad Hussain, Brian Masney, Johan Hovold, Parikshit Pareek Introduce the Qualcomm SA8540P ride automotive platform, also known as Qdrive-3 development board. This initial contribution supports SMP, CPUFreq, cluster idle, UFS, RPMh regulators, debug UART, PMICs, remoteprocs and USB. The SA8540P ride contains four PM8450 PMICs. Signed-off-by: Parikshit Pareek <quic_ppareek@quicinc.com> --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 309 ++++++++++++++++++++++ 2 files changed, 310 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sa8540p-ride.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index b0558d3389e5..c89d44756791 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -54,6 +54,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sa8540p-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts new file mode 100644 index 000000000000..0faf06625b05 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts @@ -0,0 +1,309 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/spmi/spmi.h> + +#include "sa8540p.dtsi" + +/ { + model = "Qualcomm SA8540P Ride"; + compatible = "qcom,sa8540p-ride", "qcom,sa8540p"; + + aliases { + serial0 = &qup2_uart17; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + pmm8540-a-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_l3a: ldo3 { + regulator-name = "vreg_l3a"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a: ldo13 { + regulator-name = "vreg_l13a"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pmm8540-c-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c: ldo10 { + regulator-name = "vreg_l10c"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l17c: ldo17 { + regulator-name = "vreg_l17c"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; + + pmm8540-g-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "g"; + + vreg_l3g: ldo3 { + regulator-name = "vreg_l3g"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7g: ldo7 { + regulator-name = "vreg_l7g"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8g: ldo8 { + regulator-name = "vreg_l8g"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&qup2 { + status = "okay"; +}; + +&qup2_uart17 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sa8540p/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_nsp0 { + firmware-name = "qcom/sa8540p/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_nsp1 { + firmware-name = "qcom/sa8540p/cdsp1.mbn"; + status = "okay"; +}; + +&spmi_bus { + pm8450a: pmic@0 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450a_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8450a_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8450c: pmic@4 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450c_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8450c_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8450e: pmic@8 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x8 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450e_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8450e_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8450g: pmic@c { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0xc SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450g_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8450g_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17c>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l6c>; + vccq-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l8g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_0_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "peripheral"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7a>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&usb_2_hsphy0 { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_2_qmpphy0 { + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */ -- 2.17.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v6 2/2] arm64: dts: qcom: add SA8540P ride(Qdrive-3) 2022-10-20 7:30 ` [PATCH v6 2/2] arm64: dts: qcom: add SA8540P ride(Qdrive-3) Parikshit Pareek @ 2022-10-20 11:49 ` konrad.dybcio 2022-10-28 7:50 ` Parikshit Pareek 2022-10-20 16:39 ` Brian Masney 2022-11-02 7:35 ` Shazad Hussain 2 siblings, 1 reply; 10+ messages in thread From: konrad.dybcio @ 2022-10-20 11:49 UTC (permalink / raw) To: Parikshit Pareek Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel, Andrew Halaney, Shazad Hussain, Brian Masney, Johan Hovold On 2022-10-20 09:30, Parikshit Pareek wrote: > Introduce the Qualcomm SA8540P ride automotive platform, also known as > Qdrive-3 development board. > > This initial contribution supports SMP, CPUFreq, cluster idle, UFS, > RPMh > regulators, debug UART, PMICs, remoteprocs and USB. > > The SA8540P ride contains four PM8450 PMICs. > > Signed-off-by: Parikshit Pareek <quic_ppareek@quicinc.com> > --- Hi! [...[ > + vreg_l3c: ldo3 { > + regulator-name = "vreg_l3c"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-allow-set-load; Not sure if setting load is desired after recent rpmh regulator changes. [...] > + > +&spmi_bus { > + pm8450a: pmic@0 { > + compatible = "qcom,pm8150", "qcom,spmi-pmic"; Please add a pm8450[aceg].dtsi instead, as other boards would probably like to reuse this. Also, move the spmi.h inclusion there. [...] > +}; > + > +/* PINCTRL */ Not sure if it's useful if there's nothing there for now. Konrad ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v6 2/2] arm64: dts: qcom: add SA8540P ride(Qdrive-3) 2022-10-20 11:49 ` konrad.dybcio @ 2022-10-28 7:50 ` Parikshit Pareek 2022-10-28 8:28 ` Brian Masney 0 siblings, 1 reply; 10+ messages in thread From: Parikshit Pareek @ 2022-10-28 7:50 UTC (permalink / raw) To: konrad.dybcio Cc: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel, Andrew Halaney, Shazad Hussain, Brian Masney, Johan Hovold On Thu, Oct 20, 2022 at 01:49:23PM +0200, konrad.dybcio@somainline.org wrote: > On 2022-10-20 09:30, Parikshit Pareek wrote: > > Introduce the Qualcomm SA8540P ride automotive platform, also known as > > Qdrive-3 development board. > > > > This initial contribution supports SMP, CPUFreq, cluster idle, UFS, RPMh > > regulators, debug UART, PMICs, remoteprocs and USB. > > > > The SA8540P ride contains four PM8450 PMICs. > > > > Signed-off-by: Parikshit Pareek <quic_ppareek@quicinc.com> > > --- > > Hi! > > [...[ > > > + vreg_l3c: ldo3 { > > + regulator-name = "vreg_l3c"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <1200000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + regulator-allow-set-load; > Not sure if setting load is desired after recent rpmh regulator changes. May I know the exact patch being refered here? > > [...] > > > + > > +&spmi_bus { > > + pm8450a: pmic@0 { > > + compatible = "qcom,pm8150", "qcom,spmi-pmic"; > Please add a pm8450[aceg].dtsi instead, as other boards would probably like > to > reuse this. Also, move the spmi.h inclusion there. > > [...] > > > +}; > > + > > +/* PINCTRL */ > Not sure if it's useful if there's nothing there for now. > > Konrad Regards, Parikshit Pareek ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v6 2/2] arm64: dts: qcom: add SA8540P ride(Qdrive-3) 2022-10-28 7:50 ` Parikshit Pareek @ 2022-10-28 8:28 ` Brian Masney 0 siblings, 0 replies; 10+ messages in thread From: Brian Masney @ 2022-10-28 8:28 UTC (permalink / raw) To: Parikshit Pareek Cc: konrad.dybcio, Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel, Andrew Halaney, Shazad Hussain, Johan Hovold On Fri, Oct 28, 2022 at 01:20:59PM +0530, Parikshit Pareek wrote: > > > + vreg_l3c: ldo3 { > > > + regulator-name = "vreg_l3c"; > > > + regulator-min-microvolt = <1200000>; > > > + regulator-max-microvolt = <1200000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + regulator-allow-set-load; > > Not sure if setting load is desired after recent rpmh regulator changes. > > May I know the exact patch being refered here? Hi Parikshit, You now need to specify a regulator-allowed-modes. Here's some links with more information: https://lore.kernel.org/all/20220907204924.173030-1-ahalaney@redhat.com/ https://lore.kernel.org/all/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid/ Brian ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v6 2/2] arm64: dts: qcom: add SA8540P ride(Qdrive-3) 2022-10-20 7:30 ` [PATCH v6 2/2] arm64: dts: qcom: add SA8540P ride(Qdrive-3) Parikshit Pareek 2022-10-20 11:49 ` konrad.dybcio @ 2022-10-20 16:39 ` Brian Masney 2022-11-02 7:35 ` Shazad Hussain 2 siblings, 0 replies; 10+ messages in thread From: Brian Masney @ 2022-10-20 16:39 UTC (permalink / raw) To: Parikshit Pareek Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel, Andrew Halaney, Shazad Hussain, Johan Hovold On Thu, Oct 20, 2022 at 01:00:36PM +0530, Parikshit Pareek wrote: > Introduce the Qualcomm SA8540P ride automotive platform, also known as > Qdrive-3 development board. > > This initial contribution supports SMP, CPUFreq, cluster idle, UFS, RPMh > regulators, debug UART, PMICs, remoteprocs and USB. > > The SA8540P ride contains four PM8450 PMICs. > > Signed-off-by: Parikshit Pareek <quic_ppareek@quicinc.com> With Konrad's requested changes: Reviewed-by: Brian Masney <bmasney@redhat.com> Tested-by: Brian Masney <bmasney@redhat.com> After more research, I've verified that the board reboot issue that I brought up in v5 is unrelated to the DTS, so no need to block merging this. I'll post some more findings soon about the issue. Brian ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v6 2/2] arm64: dts: qcom: add SA8540P ride(Qdrive-3) 2022-10-20 7:30 ` [PATCH v6 2/2] arm64: dts: qcom: add SA8540P ride(Qdrive-3) Parikshit Pareek 2022-10-20 11:49 ` konrad.dybcio 2022-10-20 16:39 ` Brian Masney @ 2022-11-02 7:35 ` Shazad Hussain 2 siblings, 0 replies; 10+ messages in thread From: Shazad Hussain @ 2022-11-02 7:35 UTC (permalink / raw) To: Parikshit Pareek, Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski Cc: linux-arm-msm, devicetree, linux-kernel, Andrew Halaney, Brian Masney, Johan Hovold On 10/20/2022 1:00 PM, Parikshit Pareek wrote: > Introduce the Qualcomm SA8540P ride automotive platform, also known as > Qdrive-3 development board. > > This initial contribution supports SMP, CPUFreq, cluster idle, UFS, RPMh > regulators, debug UART, PMICs, remoteprocs and USB. > > The SA8540P ride contains four PM8450 PMICs. > > Signed-off-by: Parikshit Pareek <quic_ppareek@quicinc.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 309 ++++++++++++++++++++++ > 2 files changed, 310 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sa8540p-ride.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index b0558d3389e5..c89d44756791 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -54,6 +54,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb > dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb > dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sa8540p-ride.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb > diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts > new file mode 100644 > index 000000000000..0faf06625b05 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts > @@ -0,0 +1,309 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2021, The Linux Foundation. All rights reserved. > + * Copyright (c) 2022, Linaro Limited > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include <dt-bindings/spmi/spmi.h> > + > +#include "sa8540p.dtsi" > + > +/ { > + model = "Qualcomm SA8540P Ride"; > + compatible = "qcom,sa8540p-ride", "qcom,sa8540p"; > + > + aliases { > + serial0 = &qup2_uart17; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > +}; > + > +&apps_rsc { > + pmm8540-a-regulators { > + compatible = "qcom,pm8150-rpmh-regulators"; > + qcom,pmic-id = "a"; > + > + vreg_l3a: ldo3 { > + regulator-name = "vreg_l3a"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1208000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l5a: ldo5 { > + regulator-name = "vreg_l5a"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7a: ldo7 { > + regulator-name = "vreg_l7a"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l13a: ldo13 { > + regulator-name = "vreg_l13a"; > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + pmm8540-c-regulators { > + compatible = "qcom,pm8150-rpmh-regulators"; > + qcom,pmic-id = "c"; > + > + vreg_l1c: ldo1 { > + regulator-name = "vreg_l1c"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2c: ldo2 { > + regulator-name = "vreg_l2c"; > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3c: ldo3 { > + regulator-name = "vreg_l3c"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-allow-set-load; > + }; As we don't have ufs_card_hc for ride platform, we can remove vreg_l3c. > + > + vreg_l4c: ldo4 { > + regulator-name = "vreg_l4c"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1208000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6c: ldo6 { > + regulator-name = "vreg_l6c"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-allow-set-load; > + }; > + > + vreg_l7c: ldo7 { > + regulator-name = "vreg_l7c"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l10c: ldo10 { > + regulator-name = "vreg_l10c"; > + regulator-min-microvolt = <2504000>; > + regulator-max-microvolt = <2504000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-allow-set-load; > + }; Similarly we can remove this vreg_l10c. > + > + vreg_l17c: ldo17 { > + regulator-name = "vreg_l17c"; > + regulator-min-microvolt = <2504000>; > + regulator-max-microvolt = <2504000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-allow-set-load; > + }; > + }; > + > + pmm8540-g-regulators { > + compatible = "qcom,pm8150-rpmh-regulators"; > + qcom,pmic-id = "g"; > + > + vreg_l3g: ldo3 { > + regulator-name = "vreg_l3g"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7g: ldo7 { > + regulator-name = "vreg_l7g"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l8g: ldo8 { > + regulator-name = "vreg_l8g"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > +}; > + > +&qup2 { > + status = "okay"; > +}; > + > +&qup2_uart17 { > + compatible = "qcom,geni-debug-uart"; > + status = "okay"; > +}; > + > +&remoteproc_adsp { > + firmware-name = "qcom/sa8540p/adsp.mbn"; > + status = "okay"; > +}; > + > +&remoteproc_nsp0 { > + firmware-name = "qcom/sa8540p/cdsp.mbn"; > + status = "okay"; > +}; > + > +&remoteproc_nsp1 { > + firmware-name = "qcom/sa8540p/cdsp1.mbn"; > + status = "okay"; > +}; > + > +&spmi_bus { > + pm8450a: pmic@0 { > + compatible = "qcom,pm8150", "qcom,spmi-pmic"; > + reg = <0x0 SPMI_USID>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pm8450a_gpios: gpio@c000 { > + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; > + reg = <0xc000>; > + gpio-controller; > + gpio-ranges = <&pm8450a_gpios 0 0 10>; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + }; > + > + pm8450c: pmic@4 { > + compatible = "qcom,pm8150", "qcom,spmi-pmic"; > + reg = <0x4 SPMI_USID>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pm8450c_gpios: gpio@c000 { > + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; > + reg = <0xc000>; > + gpio-controller; > + gpio-ranges = <&pm8450c_gpios 0 0 10>; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + }; > + > + pm8450e: pmic@8 { > + compatible = "qcom,pm8150", "qcom,spmi-pmic"; > + reg = <0x8 SPMI_USID>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pm8450e_gpios: gpio@c000 { > + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; > + reg = <0xc000>; > + gpio-controller; > + gpio-ranges = <&pm8450e_gpios 0 0 10>; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + }; > + > + pm8450g: pmic@c { > + compatible = "qcom,pm8150", "qcom,spmi-pmic"; > + reg = <0xc SPMI_USID>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pm8450g_gpios: gpio@c000 { > + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; > + reg = <0xc000>; > + gpio-controller; > + gpio-ranges = <&pm8450g_gpios 0 0 10>; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + }; > +}; > + > +&ufs_mem_hc { > + reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; > + > + vcc-supply = <&vreg_l17c>; > + vcc-max-microamp = <800000>; > + vccq-supply = <&vreg_l6c>; > + vccq-max-microamp = <900000>; > + > + status = "okay"; > +}; > + > +&ufs_mem_phy { > + vdda-phy-supply = <&vreg_l8g>; > + vdda-pll-supply = <&vreg_l3g>; > + > + status = "okay"; > +}; > + > +&usb_0 { > + status = "okay"; > +}; > + > +&usb_0_dwc3 { > + /* TODO: Define USB-C connector properly */ > + dr_mode = "peripheral"; > +}; > + > +&usb_0_hsphy { > + vdda-pll-supply = <&vreg_l5a>; > + vdda18-supply = <&vreg_l7a>; > + vdda33-supply = <&vreg_l13a>; > + > + status = "okay"; > +}; > + > +&usb_0_qmpphy { > + vdda-phy-supply = <&vreg_l3a>; > + vdda-pll-supply = <&vreg_l5a>; > + > + status = "okay"; > +}; > + > +&usb_2_hsphy0 { > + vdda-pll-supply = <&vreg_l5a>; > + vdda18-supply = <&vreg_l7g>; > + vdda33-supply = <&vreg_l13a>; > + > + status = "okay"; > +}; > + > +&usb_2_qmpphy0 { > + vdda-phy-supply = <&vreg_l3a>; > + vdda-pll-supply = <&vreg_l5a>; > + > + status = "okay"; > +}; > + > +&xo_board_clk { > + clock-frequency = <38400000>; > +}; > + > +/* PINCTRL */ ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2022-11-02 7:35 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-10-20 7:30 [PATCH v6 0/2] arm64: dts: qcom: add dts for sa8540p-ride board Parikshit Pareek 2022-10-20 7:30 ` [PATCH v6 1/2] dt-bindings: arm: qcom: Document additional sa8540p device Parikshit Pareek 2022-10-20 13:46 ` Krzysztof Kozlowski 2022-10-20 16:33 ` Brian Masney 2022-10-20 7:30 ` [PATCH v6 2/2] arm64: dts: qcom: add SA8540P ride(Qdrive-3) Parikshit Pareek 2022-10-20 11:49 ` konrad.dybcio 2022-10-28 7:50 ` Parikshit Pareek 2022-10-28 8:28 ` Brian Masney 2022-10-20 16:39 ` Brian Masney 2022-11-02 7:35 ` Shazad Hussain
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.