[PATCH 0/8] drivers: select REGMAP instead of depending on it

[PATCH 0/8] drivers: select REGMAP instead of depending on it

[Randy Dunlap]

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

REGMAP is selected 94 times and is depended on 11 times in
current linux-next. Eliminate the uses of "depends on" by
converting them to "select".

 [PATCH 1/8] ipmi: ASPEED_BT_IPMI_BMC: select REGMAP_MMIO instead of depending on it
 [PATCH 2/8] clk: HI655X: select REGMAP instead of depending on it
 [PATCH 3/8] gpio: GPIO_REGMAP: select REGMAP instead of depending on it
 [PATCH 4/8] leds: TI_LMU_COMMON: select REGMAP instead of depending on it
 [PATCH 5/8] platform: mellanox: select REGMAP instead of depending on it
 [PATCH 6/8] platform: x86: MLX_PLATFORM: select REGMAP instead of depending on it
 [PATCH 7/8] thermal: intel: BXT_PMIC: select REGMAP instead of depending on it
 [PATCH 8/8] serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it

diffstat:
 drivers/char/ipmi/Kconfig         |    3 ++-
 drivers/clk/Kconfig               |    2 +-
 drivers/gpio/Kconfig              |    2 +-
 drivers/leds/Kconfig              |    2 +-
 drivers/platform/mellanox/Kconfig |    9 ++++-----
 drivers/platform/x86/Kconfig      |    3 ++-
 drivers/thermal/intel/Kconfig     |    3 ++-
 drivers/tty/serial/8250/Kconfig   |    3 ++-
 8 files changed, 15 insertions(+), 12 deletions(-)

Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Corey Minyard <minyard@acm.org>
Cc: openipmi-developer@lists.sourceforge.net
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Riku Voipio <riku.voipio@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Cc: Michael Walle <michael@walle.cc>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: linux-gpio@vger.kernel.org
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Lee Jones <lee@kernel.org>
Cc: linux-leds@vger.kernel.org
Cc: Darren Hart <dvhart@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Michael Shych <michaelsh@nvidia.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: Vadim Pasternak <vadimp@nvidia.com>
Cc: platform-driver-x86@vger.kernel.org
Cc: Yegnesh S Iyer <yegnesh.s.iyer@intel.com>
Cc: Bin Gao <bin.gao@intel.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amitk@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: Oskar Senft <osk@google.com>
Cc: linux-serial@vger.kernel.org

[PATCH 1/8] ipmi: ASPEED_BT_IPMI_BMC: select REGMAP_MMIO instead of depending on it

[Randy Dunlap]

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP_MMIO" to
"select REGMAP_MMIO", which will also set REGMAP.

Fixes: eb994594bc22 ("ipmi: bt-bmc: Use a regmap for register access")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Corey Minyard <minyard@acm.org>
Cc: openipmi-developer@lists.sourceforge.net
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/char/ipmi/Kconfig |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff -- a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig
--- a/drivers/char/ipmi/Kconfig
+++ b/drivers/char/ipmi/Kconfig
@@ -162,7 +162,8 @@ config IPMI_KCS_BMC_SERIO
 
 config ASPEED_BT_IPMI_BMC
 	depends on ARCH_ASPEED || COMPILE_TEST
-	depends on REGMAP && REGMAP_MMIO && MFD_SYSCON
+	depends on MFD_SYSCON
+	select REGMAP_MMIO
 	tristate "BT IPMI bmc driver"
 	help
 	  Provides a driver for the BT (Block Transfer) IPMI interface

Re: [PATCH 1/8] ipmi: ASPEED_BT_IPMI_BMC: select REGMAP_MMIO instead of depending on it

[Corey Minyard]

On Sat, Feb 25, 2023 at 09:39:46PM -0800, Randy Dunlap wrote:
> REGMAP is a hidden (not user visible) symbol. Users cannot set it
> directly thru "make *config", so drivers should select it instead of
> depending on it if they need it.
> 
> Consistently using "select" or "depends on" can also help reduce
> Kconfig circular dependency issues.
> 
> Therefore, change the use of "depends on REGMAP_MMIO" to
> "select REGMAP_MMIO", which will also set REGMAP.

This seems reasonable.  I can take it into my tree, or..

Acked-by: Corey Minyard <cminyard@mvista.com>

> 
> Fixes: eb994594bc22 ("ipmi: bt-bmc: Use a regmap for register access")
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Andrew Jeffery <andrew@aj.id.au>
> Cc: Corey Minyard <minyard@acm.org>
> Cc: openipmi-developer@lists.sourceforge.net
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  drivers/char/ipmi/Kconfig |    3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff -- a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig
> --- a/drivers/char/ipmi/Kconfig
> +++ b/drivers/char/ipmi/Kconfig
> @@ -162,7 +162,8 @@ config IPMI_KCS_BMC_SERIO
>  
>  config ASPEED_BT_IPMI_BMC
>  	depends on ARCH_ASPEED || COMPILE_TEST
> -	depends on REGMAP && REGMAP_MMIO && MFD_SYSCON
> +	depends on MFD_SYSCON
> +	select REGMAP_MMIO
>  	tristate "BT IPMI bmc driver"
>  	help
>  	  Provides a driver for the BT (Block Transfer) IPMI interface

Re: [PATCH 1/8] ipmi: ASPEED_BT_IPMI_BMC: select REGMAP_MMIO instead of depending on it

[Randy Dunlap]

On 2/26/23 14:59, Corey Minyard wrote:
> On Sat, Feb 25, 2023 at 09:39:46PM -0800, Randy Dunlap wrote:
>> REGMAP is a hidden (not user visible) symbol. Users cannot set it
>> directly thru "make *config", so drivers should select it instead of
>> depending on it if they need it.
>>
>> Consistently using "select" or "depends on" can also help reduce
>> Kconfig circular dependency issues.
>>
>> Therefore, change the use of "depends on REGMAP_MMIO" to
>> "select REGMAP_MMIO", which will also set REGMAP.
> 
> This seems reasonable.  I can take it into my tree, or..

Just take it, please. I expect that each subsystem maintainer
will take their respective patches.

> Acked-by: Corey Minyard <cminyard@mvista.com>
> 
>>
>> Fixes: eb994594bc22 ("ipmi: bt-bmc: Use a regmap for register access")
>> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
>> Cc: Andrew Jeffery <andrew@aj.id.au>
>> Cc: Corey Minyard <minyard@acm.org>
>> Cc: openipmi-developer@lists.sourceforge.net
>> Cc: Arnd Bergmann <arnd@arndb.de>
>> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>> ---
>>  drivers/char/ipmi/Kconfig |    3 ++-
>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff -- a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig
>> --- a/drivers/char/ipmi/Kconfig
>> +++ b/drivers/char/ipmi/Kconfig
>> @@ -162,7 +162,8 @@ config IPMI_KCS_BMC_SERIO
>>  
>>  config ASPEED_BT_IPMI_BMC
>>  	depends on ARCH_ASPEED || COMPILE_TEST
>> -	depends on REGMAP && REGMAP_MMIO && MFD_SYSCON
>> +	depends on MFD_SYSCON
>> +	select REGMAP_MMIO
>>  	tristate "BT IPMI bmc driver"
>>  	help
>>  	  Provides a driver for the BT (Block Transfer) IPMI interface

-- 
~Randy

[PATCH 2/8] clk: HI655X: select REGMAP instead of depending on it

[Randy Dunlap]

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

Fixes: 3a49afb84ca0 ("clk: enable hi655x common clk automatically")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Riku Voipio <riku.voipio@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
---
 drivers/clk/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff -- a/drivers/clk/Kconfig b/drivers/clk/Kconfig
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -91,7 +91,7 @@ config COMMON_CLK_RK808
 config COMMON_CLK_HI655X
 	tristate "Clock driver for Hi655x" if EXPERT
 	depends on (MFD_HI655X_PMIC || COMPILE_TEST)
-	depends on REGMAP
+	select REGMAP
 	default MFD_HI655X_PMIC
 	help
 	  This driver supports the hi655x PMIC clock. This

Re: [PATCH 2/8] clk: HI655X: select REGMAP instead of depending on it

[Stephen Boyd]

Quoting Randy Dunlap (2023-02-25 21:39:47)
> REGMAP is a hidden (not user visible) symbol. Users cannot set it
> directly thru "make *config", so drivers should select it instead of
> depending on it if they need it.
> 
> Consistently using "select" or "depends on" can also help reduce
> Kconfig circular dependency issues.
> 
> Therefore, change the use of "depends on REGMAP" to "select REGMAP".
> 
> Fixes: 3a49afb84ca0 ("clk: enable hi655x common clk automatically")
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Riku Voipio <riku.voipio@linaro.org>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: linux-clk@vger.kernel.org
> ---

Applied to clk-fixes

[PATCH 3/8] gpio: GPIO_REGMAP: select REGMAP instead of depending on it

[Randy Dunlap]

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

Fixes: ebe363197e52 ("gpio: add a reusable generic gpio_chip using regmap")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Michael Walle <michael@walle.cc>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: linux-gpio@vger.kernel.org
---
 drivers/gpio/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff -- a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -100,7 +100,7 @@ config GPIO_GENERIC
 	tristate
 
 config GPIO_REGMAP
-	depends on REGMAP
+	select REGMAP
 	tristate
 
 # put drivers in the right section, in alphabetical order

Re: [PATCH 3/8] gpio: GPIO_REGMAP: select REGMAP instead of depending on it

[Michael Walle]

Am 2023-02-26 06:39, schrieb Randy Dunlap:
> REGMAP is a hidden (not user visible) symbol. Users cannot set it
> directly thru "make *config", so drivers should select it instead of
> depending on it if they need it.
> 
> Consistently using "select" or "depends on" can also help reduce
> Kconfig circular dependency issues.
> 
> Therefore, change the use of "depends on REGMAP" to "select REGMAP".
> 
> Fixes: ebe363197e52 ("gpio: add a reusable generic gpio_chip using 
> regmap")
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Michael Walle <michael@walle.cc>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Bartosz Golaszewski <brgl@bgdev.pl>
> Cc: linux-gpio@vger.kernel.org

Acked-by: Michael Walle <michael@walle.cc>

Thanks,
-michael

Re: [PATCH 3/8] gpio: GPIO_REGMAP: select REGMAP instead of depending on it

[Bartosz Golaszewski]

On Sun, Feb 26, 2023 at 6:40 AM Randy Dunlap <rdunlap@infradead.org> wrote:
>
> REGMAP is a hidden (not user visible) symbol. Users cannot set it
> directly thru "make *config", so drivers should select it instead of
> depending on it if they need it.
>
> Consistently using "select" or "depends on" can also help reduce
> Kconfig circular dependency issues.
>
> Therefore, change the use of "depends on REGMAP" to "select REGMAP".
>
> Fixes: ebe363197e52 ("gpio: add a reusable generic gpio_chip using regmap")
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Michael Walle <michael@walle.cc>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Bartosz Golaszewski <brgl@bgdev.pl>
> Cc: linux-gpio@vger.kernel.org
> ---
>  drivers/gpio/Kconfig |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff -- a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -100,7 +100,7 @@ config GPIO_GENERIC
>         tristate
>
>  config GPIO_REGMAP
> -       depends on REGMAP
> +       select REGMAP
>         tristate
>
>  # put drivers in the right section, in alphabetical order

Queued for fixes, thanks!

Bart

[PATCH 4/8] leds: TI_LMU_COMMON: select REGMAP instead of depending on it

[Randy Dunlap]

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

Fixes: 3fce8e1eb994 ("leds: TI LMU: Add common code for TI LMU devices")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Lee Jones <lee@kernel.org>
Cc: linux-leds@vger.kernel.org
---
 drivers/leds/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff -- a/drivers/leds/Kconfig b/drivers/leds/Kconfig
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -795,7 +795,7 @@ config LEDS_SPI_BYTE
 config LEDS_TI_LMU_COMMON
 	tristate "LED driver for TI LMU"
 	depends on LEDS_CLASS
-	depends on REGMAP
+	select REGMAP
 	help
 	  Say Y to enable the LED driver for TI LMU devices.
 	  This supports common features between the TI LM3532, LM3631, LM3632,

Re: [PATCH 4/8] leds: TI_LMU_COMMON: select REGMAP instead of depending on it

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 728 bytes --]

On Sat 2023-02-25 21:39:49, Randy Dunlap wrote:
> REGMAP is a hidden (not user visible) symbol. Users cannot set it
> directly thru "make *config", so drivers should select it instead of
> depending on it if they need it.
> 
> Consistently using "select" or "depends on" can also help reduce
> Kconfig circular dependency issues.
> 
> Therefore, change the use of "depends on REGMAP" to "select REGMAP".
> 
> Fixes: 3fce8e1eb994 ("leds: TI LMU: Add common code for TI LMU devices")
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Dan Murphy <dmurphy@ti.com>

Acked-by: Pavel Machek <pavel@ucw.cz>

Best regards,
								Pavel
-- 
People of Russia, stop Putin before his war on Ukraine escalates.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4/8] leds: TI_LMU_COMMON: select REGMAP instead of depending on it

[Lee Jones]

On Sat, 25 Feb 2023, Randy Dunlap wrote:

> REGMAP is a hidden (not user visible) symbol. Users cannot set it
> directly thru "make *config", so drivers should select it instead of
> depending on it if they need it.
> 
> Consistently using "select" or "depends on" can also help reduce
> Kconfig circular dependency issues.
> 
> Therefore, change the use of "depends on REGMAP" to "select REGMAP".
> 
> Fixes: 3fce8e1eb994 ("leds: TI LMU: Add common code for TI LMU devices")
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Dan Murphy <dmurphy@ti.com>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
> Cc: Lee Jones <lee@kernel.org>
> Cc: linux-leds@vger.kernel.org
> ---
>  drivers/leds/Kconfig |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Applied, thanks

-- 
Lee Jones [李琼斯]

[PATCH 5/8] platform: mellanox: select REGMAP instead of depending on it

[Randy Dunlap]

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

For NVSW_SN2201, select REGMAP_I2C instead of depending on it.

Fixes: c6acad68eb2d ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface")
Fixes: 5ec4a8ace06c ("platform/mellanox: Introduce support for Mellanox register access driver")
Fixes: 62f9529b8d5c ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Michael Shych <michaelsh@nvidia.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: Vadim Pasternak <vadimp@nvidia.com>
Cc: platform-driver-x86@vger.kernel.org
---
 drivers/platform/mellanox/Kconfig |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff -- a/drivers/platform/mellanox/Kconfig b/drivers/platform/mellanox/Kconfig
--- a/drivers/platform/mellanox/Kconfig
+++ b/drivers/platform/mellanox/Kconfig
@@ -16,17 +16,17 @@ if MELLANOX_PLATFORM
 
 config MLXREG_HOTPLUG
 	tristate "Mellanox platform hotplug driver support"
-	depends on REGMAP
 	depends on HWMON
 	depends on I2C
+	select REGMAP
 	help
 	  This driver handles hot-plug events for the power suppliers, power
 	  cables and fans on the wide range Mellanox IB and Ethernet systems.
 
 config MLXREG_IO
 	tristate "Mellanox platform register access driver support"
-	depends on REGMAP
 	depends on HWMON
+	select REGMAP
 	help
 	  This driver allows access to Mellanox programmable device register
 	  space through sysfs interface. The sets of registers for sysfs access
@@ -36,9 +36,9 @@ config MLXREG_IO
 
 config MLXREG_LC
 	tristate "Mellanox line card platform driver support"
-	depends on REGMAP
 	depends on HWMON
 	depends on I2C
+	select REGMAP
 	help
 	  This driver provides support for the Mellanox MSN4800-XX line cards,
 	  which are the part of MSN4800 Ethernet modular switch systems
@@ -80,10 +80,9 @@ config MLXBF_PMC
 
 config NVSW_SN2201
 	tristate "Nvidia SN2201 platform driver support"
-	depends on REGMAP
 	depends on HWMON
 	depends on I2C
-	depends on REGMAP_I2C
+	select REGMAP_I2C
 	help
 	  This driver provides support for the Nvidia SN2201 platform.
 	  The SN2201 is a highly integrated for one rack unit system with

RE: [PATCH 5/8] platform: mellanox: select REGMAP instead of depending on it

[Vadim Pasternak]

> -----Original Message-----
> From: Randy Dunlap <rdunlap@infradead.org>
> Sent: Sunday, 26 February 2023 7:40
> To: linux-kernel@vger.kernel.org
> Cc: Randy Dunlap <rdunlap@infradead.org>; Darren Hart
> <dvhart@infradead.org>; Hans de Goede <hdegoede@redhat.com>; Michael
> Shych <michaelsh@nvidia.com>; Mark Gross <markgross@kernel.org>;
> Vadim Pasternak <vadimp@nvidia.com>; platform-driver-
> x86@vger.kernel.org
> Subject: [PATCH 5/8] platform: mellanox: select REGMAP instead of
> depending on it
> 
> REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru
> "make *config", so drivers should select it instead of depending on it if they
> need it.
> 
> Consistently using "select" or "depends on" can also help reduce Kconfig
> circular dependency issues.
> 
> Therefore, change the use of "depends on REGMAP" to "select REGMAP".
> 
> For NVSW_SN2201, select REGMAP_I2C instead of depending on it.
> 
> Fixes: c6acad68eb2d ("platform/mellanox: mlxreg-hotplug: Modify to use a
> regmap interface")
> Fixes: 5ec4a8ace06c ("platform/mellanox: Introduce support for Mellanox
> register access driver")
> Fixes: 62f9529b8d5c ("platform/mellanox: mlxreg-lc: Add initial support for
> Nvidia line card devices")
> Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201
> system")
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>

Acked-by: Vadim Pasternak <vadimp@nvidia.com>

> Cc: Darren Hart <dvhart@infradead.org>
> Cc: Hans de Goede <hdegoede@redhat.com>
> Cc: Michael Shych <michaelsh@nvidia.com>
> Cc: Mark Gross <markgross@kernel.org>
> Cc: Vadim Pasternak <vadimp@nvidia.com>
> Cc: platform-driver-x86@vger.kernel.org
> ---
>  drivers/platform/mellanox/Kconfig |    9 ++++-----
>  1 file changed, 4 insertions(+), 5 deletions(-)
> 
> diff -- a/drivers/platform/mellanox/Kconfig
> b/drivers/platform/mellanox/Kconfig
> --- a/drivers/platform/mellanox/Kconfig
> +++ b/drivers/platform/mellanox/Kconfig
> @@ -16,17 +16,17 @@ if MELLANOX_PLATFORM
> 
>  config MLXREG_HOTPLUG
>  	tristate "Mellanox platform hotplug driver support"
> -	depends on REGMAP
>  	depends on HWMON
>  	depends on I2C
> +	select REGMAP
>  	help
>  	  This driver handles hot-plug events for the power suppliers, power
>  	  cables and fans on the wide range Mellanox IB and Ethernet
> systems.
> 
>  config MLXREG_IO
>  	tristate "Mellanox platform register access driver support"
> -	depends on REGMAP
>  	depends on HWMON
> +	select REGMAP
>  	help
>  	  This driver allows access to Mellanox programmable device register
>  	  space through sysfs interface. The sets of registers for sysfs access
> @@ -36,9 +36,9 @@ config MLXREG_IO
> 
>  config MLXREG_LC
>  	tristate "Mellanox line card platform driver support"
> -	depends on REGMAP
>  	depends on HWMON
>  	depends on I2C
> +	select REGMAP
>  	help
>  	  This driver provides support for the Mellanox MSN4800-XX line
> cards,
>  	  which are the part of MSN4800 Ethernet modular switch systems
> @@ -80,10 +80,9 @@ config MLXBF_PMC
> 
>  config NVSW_SN2201
>  	tristate "Nvidia SN2201 platform driver support"
> -	depends on REGMAP
>  	depends on HWMON
>  	depends on I2C
> -	depends on REGMAP_I2C
> +	select REGMAP_I2C
>  	help
>  	  This driver provides support for the Nvidia SN2201 platform.
>  	  The SN2201 is a highly integrated for one rack unit system with

[PATCH 6/8] platform: x86: MLX_PLATFORM: select REGMAP instead of depending on it

[Randy Dunlap]

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

Fixes: ef0f62264b2a ("platform/x86: mlx-platform: Add physical bus number auto detection")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vadim Pasternak <vadimp@mellanox.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
---
 drivers/platform/x86/Kconfig |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff -- a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -955,7 +955,8 @@ config SERIAL_MULTI_INSTANTIATE
 
 config MLX_PLATFORM
 	tristate "Mellanox Technologies platform support"
-	depends on I2C && REGMAP
+	depends on I2C
+	select REGMAP
 	help
 	  This option enables system support for the Mellanox Technologies
 	  platform. The Mellanox systems provide data center networking

RE: [PATCH 6/8] platform: x86: MLX_PLATFORM: select REGMAP instead of depending on it

[Vadim Pasternak]

> -----Original Message-----
> From: Randy Dunlap <rdunlap@infradead.org>
> Sent: Sunday, 26 February 2023 7:40
> To: linux-kernel@vger.kernel.org
> Cc: Randy Dunlap <rdunlap@infradead.org>; Vadim Pasternak
> <vadimp@mellanox.com>; Darren Hart <dvhart@infradead.org>; Hans de
> Goede <hdegoede@redhat.com>; Mark Gross <markgross@kernel.org>;
> platform-driver-x86@vger.kernel.org
> Subject: [PATCH 6/8] platform: x86: MLX_PLATFORM: select REGMAP instead
> of depending on it
> 
> REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru
> "make *config", so drivers should select it instead of depending on it if they
> need it.
> 
> Consistently using "select" or "depends on" can also help reduce Kconfig
> circular dependency issues.
> 
> Therefore, change the use of "depends on REGMAP" to "select REGMAP".
> 
> Fixes: ef0f62264b2a ("platform/x86: mlx-platform: Add physical bus number
> auto detection")
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>

Acked-by: Vadim Pasternak <vadimp@nvidia.com>

> Cc: Vadim Pasternak <vadimp@mellanox.com>
> Cc: Darren Hart <dvhart@infradead.org>
> Cc: Hans de Goede <hdegoede@redhat.com>
> Cc: Mark Gross <markgross@kernel.org>
> Cc: platform-driver-x86@vger.kernel.org
> ---
>  drivers/platform/x86/Kconfig |    3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff -- a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -955,7 +955,8 @@ config SERIAL_MULTI_INSTANTIATE
> 
>  config MLX_PLATFORM
>  	tristate "Mellanox Technologies platform support"
> -	depends on I2C && REGMAP
> +	depends on I2C
> +	select REGMAP
>  	help
>  	  This option enables system support for the Mellanox Technologies
>  	  platform. The Mellanox systems provide data center networking

[PATCH 7/8] thermal: intel: BXT_PMIC: select REGMAP instead of depending on it

[Randy Dunlap]

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

Fixes: b474303ffd57 ("thermal: add Intel BXT WhiskeyCove PMIC thermal driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Yegnesh S Iyer <yegnesh.s.iyer@intel.com>
Cc: Bin Gao <bin.gao@intel.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amitk@kernel.org>
Cc: linux-pm@vger.kernel.org
---
 drivers/thermal/intel/Kconfig |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff -- a/drivers/thermal/intel/Kconfig b/drivers/thermal/intel/Kconfig
--- a/drivers/thermal/intel/Kconfig
+++ b/drivers/thermal/intel/Kconfig
@@ -73,7 +73,8 @@ endmenu
 
 config INTEL_BXT_PMIC_THERMAL
 	tristate "Intel Broxton PMIC thermal driver"
-	depends on X86 && INTEL_SOC_PMIC_BXTWC && REGMAP
+	depends on X86 && INTEL_SOC_PMIC_BXTWC
+	select REGMAP
 	help
 	  Select this driver for Intel Broxton PMIC with ADC channels monitoring
 	  system temperature measurements and alerts.

Re: [PATCH 7/8] thermal: intel: BXT_PMIC: select REGMAP instead of depending on it

[Rafael J. Wysocki]

On Sun, Feb 26, 2023 at 6:40 AM Randy Dunlap <rdunlap@infradead.org> wrote:
>
> REGMAP is a hidden (not user visible) symbol. Users cannot set it
> directly thru "make *config", so drivers should select it instead of
> depending on it if they need it.
>
> Consistently using "select" or "depends on" can also help reduce
> Kconfig circular dependency issues.
>
> Therefore, change the use of "depends on REGMAP" to "select REGMAP".
>
> Fixes: b474303ffd57 ("thermal: add Intel BXT WhiskeyCove PMIC thermal driver")
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Yegnesh S Iyer <yegnesh.s.iyer@intel.com>
> Cc: Bin Gao <bin.gao@intel.com>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Rafael J. Wysocki <rafael@kernel.org>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Amit Kucheria <amitk@kernel.org>
> Cc: linux-pm@vger.kernel.org
> ---
>  drivers/thermal/intel/Kconfig |    3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff -- a/drivers/thermal/intel/Kconfig b/drivers/thermal/intel/Kconfig
> --- a/drivers/thermal/intel/Kconfig
> +++ b/drivers/thermal/intel/Kconfig
> @@ -73,7 +73,8 @@ endmenu
>
>  config INTEL_BXT_PMIC_THERMAL
>         tristate "Intel Broxton PMIC thermal driver"
> -       depends on X86 && INTEL_SOC_PMIC_BXTWC && REGMAP
> +       depends on X86 && INTEL_SOC_PMIC_BXTWC
> +       select REGMAP
>         help
>           Select this driver for Intel Broxton PMIC with ADC channels monitoring
>           system temperature measurements and alerts.

Applied as 6.3-rc material, thanks!

[PATCH 8/8] serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it

[Randy Dunlap]

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

Fixes: 8d310c9107a2 ("drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Oskar Senft <osk@google.com>
Cc: linux-serial@vger.kernel.org
---
 drivers/tty/serial/8250/Kconfig |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff -- a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -257,8 +257,9 @@ config SERIAL_8250_ASPEED_VUART
 	tristate "Aspeed Virtual UART"
 	depends on SERIAL_8250
 	depends on OF
-	depends on REGMAP && MFD_SYSCON
+	depends on MFD_SYSCON
 	depends on ARCH_ASPEED || COMPILE_TEST
+	select REGMAP
 	help
 	  If you want to use the virtual UART (VUART) device on Aspeed
 	  BMC platforms, enable this option. This enables the 16550A-

Re: [PATCH 0/8] drivers: select REGMAP instead of depending on it

[Hans de Goede]

Hi Randy,

On 2/26/23 06:39, Randy Dunlap wrote:
> REGMAP is a hidden (not user visible) symbol. Users cannot set it
> directly thru "make *config", so drivers should select it instead of
> depending on it if they need it.
> 
> Consistently using "select" or "depends on" can also help reduce
> Kconfig circular dependency issues.
> 
> REGMAP is selected 94 times and is depended on 11 times in
> current linux-next. Eliminate the uses of "depends on" by
> converting them to "select".

Thank you for your work on this. Mixing of depends on vs select
is a real problem with many Kconfig symbols.

>  [PATCH 1/8] ipmi: ASPEED_BT_IPMI_BMC: select REGMAP_MMIO instead of depending on it
>  [PATCH 2/8] clk: HI655X: select REGMAP instead of depending on it
>  [PATCH 3/8] gpio: GPIO_REGMAP: select REGMAP instead of depending on it
>  [PATCH 4/8] leds: TI_LMU_COMMON: select REGMAP instead of depending on it
>  [PATCH 5/8] platform: mellanox: select REGMAP instead of depending on it
>  [PATCH 6/8] platform: x86: MLX_PLATFORM: select REGMAP instead of depending on it
>  [PATCH 7/8] thermal: intel: BXT_PMIC: select REGMAP instead of depending on it
>  [PATCH 8/8] serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it

For patch 5/8 and 6/8, do you want me to merge them through the pdx86
(platform-drivers-x86) tree, or do you plan to merge this whole series
in one go through some other tree?

If you plan to merge the whole series through some other tree,
here is my acked by for doing so for 5/8 and 6/8:

Acked-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans




> 
> diffstat:
>  drivers/char/ipmi/Kconfig         |    3 ++-
>  drivers/clk/Kconfig               |    2 +-
>  drivers/gpio/Kconfig              |    2 +-
>  drivers/leds/Kconfig              |    2 +-
>  drivers/platform/mellanox/Kconfig |    9 ++++-----
>  drivers/platform/x86/Kconfig      |    3 ++-
>  drivers/thermal/intel/Kconfig     |    3 ++-
>  drivers/tty/serial/8250/Kconfig   |    3 ++-
>  8 files changed, 15 insertions(+), 12 deletions(-)
> 
> Cc: Andrew Jeffery <andrew@aj.id.au>
> Cc: Corey Minyard <minyard@acm.org>
> Cc: openipmi-developer@lists.sourceforge.net
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Riku Voipio <riku.voipio@linaro.org>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: linux-clk@vger.kernel.org
> Cc: Michael Walle <michael@walle.cc>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Bartosz Golaszewski <brgl@bgdev.pl>
> Cc: linux-gpio@vger.kernel.org
> Cc: Dan Murphy <dmurphy@ti.com>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
> Cc: Lee Jones <lee@kernel.org>
> Cc: linux-leds@vger.kernel.org
> Cc: Darren Hart <dvhart@infradead.org>
> Cc: Hans de Goede <hdegoede@redhat.com>
> Cc: Michael Shych <michaelsh@nvidia.com>
> Cc: Mark Gross <markgross@kernel.org>
> Cc: Vadim Pasternak <vadimp@nvidia.com>
> Cc: platform-driver-x86@vger.kernel.org
> Cc: Yegnesh S Iyer <yegnesh.s.iyer@intel.com>
> Cc: Bin Gao <bin.gao@intel.com>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: "Rafael J. Wysocki" <rafael@kernel.org>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Amit Kucheria <amitk@kernel.org>
> Cc: linux-pm@vger.kernel.org
> Cc: Oskar Senft <osk@google.com>
> Cc: linux-serial@vger.kernel.org
> 

Re: [PATCH 0/8] drivers: select REGMAP instead of depending on it

[Randy Dunlap]

On 2/27/23 01:31, Hans de Goede wrote:
> Hi Randy,
> 
> On 2/26/23 06:39, Randy Dunlap wrote:
>> REGMAP is a hidden (not user visible) symbol. Users cannot set it
>> directly thru "make *config", so drivers should select it instead of
>> depending on it if they need it.
>>
>> Consistently using "select" or "depends on" can also help reduce
>> Kconfig circular dependency issues.
>>
>> REGMAP is selected 94 times and is depended on 11 times in
>> current linux-next. Eliminate the uses of "depends on" by
>> converting them to "select".
> 
> Thank you for your work on this. Mixing of depends on vs select
> is a real problem with many Kconfig symbols.
> 
>>  [PATCH 1/8] ipmi: ASPEED_BT_IPMI_BMC: select REGMAP_MMIO instead of depending on it
>>  [PATCH 2/8] clk: HI655X: select REGMAP instead of depending on it
>>  [PATCH 3/8] gpio: GPIO_REGMAP: select REGMAP instead of depending on it
>>  [PATCH 4/8] leds: TI_LMU_COMMON: select REGMAP instead of depending on it
>>  [PATCH 5/8] platform: mellanox: select REGMAP instead of depending on it
>>  [PATCH 6/8] platform: x86: MLX_PLATFORM: select REGMAP instead of depending on it
>>  [PATCH 7/8] thermal: intel: BXT_PMIC: select REGMAP instead of depending on it
>>  [PATCH 8/8] serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it
> 
> For patch 5/8 and 6/8, do you want me to merge them through the pdx86
> (platform-drivers-x86) tree, or do you plan to merge this whole series
> in one go through some other tree?

Hi Hans,
Please merge them thru the pdx86 tree.

Thanks.

> If you plan to merge the whole series through some other tree,
> here is my acked by for doing so for 5/8 and 6/8:
> 
> Acked-by: Hans de Goede <hdegoede@redhat.com>
> 
> Regards,
> 
> Hans
> 
> 
> 
> 
>>
>> diffstat:
>>  drivers/char/ipmi/Kconfig         |    3 ++-
>>  drivers/clk/Kconfig               |    2 +-
>>  drivers/gpio/Kconfig              |    2 +-
>>  drivers/leds/Kconfig              |    2 +-
>>  drivers/platform/mellanox/Kconfig |    9 ++++-----
>>  drivers/platform/x86/Kconfig      |    3 ++-
>>  drivers/thermal/intel/Kconfig     |    3 ++-
>>  drivers/tty/serial/8250/Kconfig   |    3 ++-
>>  8 files changed, 15 insertions(+), 12 deletions(-)
>>
>> Cc: Andrew Jeffery <andrew@aj.id.au>
>> Cc: Corey Minyard <minyard@acm.org>
>> Cc: openipmi-developer@lists.sourceforge.net
>> Cc: Arnd Bergmann <arnd@arndb.de>
>> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>> Cc: Riku Voipio <riku.voipio@linaro.org>
>> Cc: Stephen Boyd <sboyd@kernel.org>
>> Cc: Michael Turquette <mturquette@baylibre.com>
>> Cc: linux-clk@vger.kernel.org
>> Cc: Michael Walle <michael@walle.cc>
>> Cc: Linus Walleij <linus.walleij@linaro.org>
>> Cc: Bartosz Golaszewski <brgl@bgdev.pl>
>> Cc: linux-gpio@vger.kernel.org
>> Cc: Dan Murphy <dmurphy@ti.com>
>> Cc: Pavel Machek <pavel@ucw.cz>
>> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
>> Cc: Lee Jones <lee@kernel.org>
>> Cc: linux-leds@vger.kernel.org
>> Cc: Darren Hart <dvhart@infradead.org>
>> Cc: Hans de Goede <hdegoede@redhat.com>
>> Cc: Michael Shych <michaelsh@nvidia.com>
>> Cc: Mark Gross <markgross@kernel.org>
>> Cc: Vadim Pasternak <vadimp@nvidia.com>
>> Cc: platform-driver-x86@vger.kernel.org
>> Cc: Yegnesh S Iyer <yegnesh.s.iyer@intel.com>
>> Cc: Bin Gao <bin.gao@intel.com>
>> Cc: Zhang Rui <rui.zhang@intel.com>
>> Cc: "Rafael J. Wysocki" <rafael@kernel.org>
>> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
>> Cc: Amit Kucheria <amitk@kernel.org>
>> Cc: linux-pm@vger.kernel.org
>> Cc: Oskar Senft <osk@google.com>
>> Cc: linux-serial@vger.kernel.org
>>
> 

-- 
~Randy

Re: [PATCH 0/8] drivers: select REGMAP instead of depending on it

[Hans de Goede]

Hi,

On 2/27/23 17:07, Randy Dunlap wrote:
> 
> 
> On 2/27/23 01:31, Hans de Goede wrote:
>> Hi Randy,
>>
>> On 2/26/23 06:39, Randy Dunlap wrote:
>>> REGMAP is a hidden (not user visible) symbol. Users cannot set it
>>> directly thru "make *config", so drivers should select it instead of
>>> depending on it if they need it.
>>>
>>> Consistently using "select" or "depends on" can also help reduce
>>> Kconfig circular dependency issues.
>>>
>>> REGMAP is selected 94 times and is depended on 11 times in
>>> current linux-next. Eliminate the uses of "depends on" by
>>> converting them to "select".
>>
>> Thank you for your work on this. Mixing of depends on vs select
>> is a real problem with many Kconfig symbols.
>>
>>>  [PATCH 1/8] ipmi: ASPEED_BT_IPMI_BMC: select REGMAP_MMIO instead of depending on it
>>>  [PATCH 2/8] clk: HI655X: select REGMAP instead of depending on it
>>>  [PATCH 3/8] gpio: GPIO_REGMAP: select REGMAP instead of depending on it
>>>  [PATCH 4/8] leds: TI_LMU_COMMON: select REGMAP instead of depending on it
>>>  [PATCH 5/8] platform: mellanox: select REGMAP instead of depending on it
>>>  [PATCH 6/8] platform: x86: MLX_PLATFORM: select REGMAP instead of depending on it
>>>  [PATCH 7/8] thermal: intel: BXT_PMIC: select REGMAP instead of depending on it
>>>  [PATCH 8/8] serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it
>>
>> For patch 5/8 and 6/8, do you want me to merge them through the pdx86
>> (platform-drivers-x86) tree, or do you plan to merge this whole series
>> in one go through some other tree?
> 
> Hi Hans,
> Please merge them thru the pdx86 tree.

Ok, I've applied patch 5/8 + 6/8 to my review-hans branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans

I'll rebase that branch once 6.3-rc1 is out and then push the rebased
patch to the fixes branch and include it in my next 6.3 fixes pull-req
to Linus.

Regards,

Hans





>>>
>>> diffstat:
>>>  drivers/char/ipmi/Kconfig         |    3 ++-
>>>  drivers/clk/Kconfig               |    2 +-
>>>  drivers/gpio/Kconfig              |    2 +-
>>>  drivers/leds/Kconfig              |    2 +-
>>>  drivers/platform/mellanox/Kconfig |    9 ++++-----
>>>  drivers/platform/x86/Kconfig      |    3 ++-
>>>  drivers/thermal/intel/Kconfig     |    3 ++-
>>>  drivers/tty/serial/8250/Kconfig   |    3 ++-
>>>  8 files changed, 15 insertions(+), 12 deletions(-)
>>>
>>> Cc: Andrew Jeffery <andrew@aj.id.au>
>>> Cc: Corey Minyard <minyard@acm.org>
>>> Cc: openipmi-developer@lists.sourceforge.net
>>> Cc: Arnd Bergmann <arnd@arndb.de>
>>> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>>> Cc: Riku Voipio <riku.voipio@linaro.org>
>>> Cc: Stephen Boyd <sboyd@kernel.org>
>>> Cc: Michael Turquette <mturquette@baylibre.com>
>>> Cc: linux-clk@vger.kernel.org
>>> Cc: Michael Walle <michael@walle.cc>
>>> Cc: Linus Walleij <linus.walleij@linaro.org>
>>> Cc: Bartosz Golaszewski <brgl@bgdev.pl>
>>> Cc: linux-gpio@vger.kernel.org
>>> Cc: Dan Murphy <dmurphy@ti.com>
>>> Cc: Pavel Machek <pavel@ucw.cz>
>>> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
>>> Cc: Lee Jones <lee@kernel.org>
>>> Cc: linux-leds@vger.kernel.org
>>> Cc: Darren Hart <dvhart@infradead.org>
>>> Cc: Hans de Goede <hdegoede@redhat.com>
>>> Cc: Michael Shych <michaelsh@nvidia.com>
>>> Cc: Mark Gross <markgross@kernel.org>
>>> Cc: Vadim Pasternak <vadimp@nvidia.com>
>>> Cc: platform-driver-x86@vger.kernel.org
>>> Cc: Yegnesh S Iyer <yegnesh.s.iyer@intel.com>
>>> Cc: Bin Gao <bin.gao@intel.com>
>>> Cc: Zhang Rui <rui.zhang@intel.com>
>>> Cc: "Rafael J. Wysocki" <rafael@kernel.org>
>>> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
>>> Cc: Amit Kucheria <amitk@kernel.org>
>>> Cc: linux-pm@vger.kernel.org
>>> Cc: Oskar Senft <osk@google.com>
>>> Cc: linux-serial@vger.kernel.org
>>>
>>
>