From: Sean Anderson <sean.anderson@seco.com>
To: Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
linux-phy@lists.infradead.org
Cc: Madalin Bucur <madalin.bucur@nxp.com>,
linuxppc-dev@lists.ozlabs.org, devicetree@vger.kernel.org,
Ioana Ciornei <ioana.ciornei@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Camelia Alexandra Groza <camelia.groza@nxp.com>,
linux-arm-kernel@lists.infradead.org,
Bagas Sanjaya <bagasdotme@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Sean Anderson <sean.anderson@seco.com>,
Li Yang <leoyang.li@nxp.com>, Shawn Guo <shawnguo@kernel.org>
Subject: [PATCH v10 08/13] phy: lynx10g: Enable by default on Layerscape
Date: Mon, 6 Mar 2023 14:15:30 -0500 [thread overview]
Message-ID: <20230306191535.1917656-9-sean.anderson@seco.com> (raw)
In-Reply-To: <20230306191535.1917656-1-sean.anderson@seco.com>
The next few patches will break ethernet if the serdes is not enabled,
so enable the serdes driver by default on Layerscape.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---
Changes in v10:
- New
drivers/phy/freescale/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
index 6bebe00f5889..b396162dc859 100644
--- a/drivers/phy/freescale/Kconfig
+++ b/drivers/phy/freescale/Kconfig
@@ -54,6 +54,7 @@ config PHY_FSL_LYNX_10G
depends on ARCH_LAYERSCAPE || PPC || COMPILE_TEST
select GENERIC_PHY
select REGMAP_MMIO
+ default y if ARCH_LAYERSCAPE
help
This adds support for the Lynx "SerDes" devices found on various QorIQ
SoCs. There may be up to four SerDes devices on each SoC, and each
--
2.35.1.1320.gc452695387.dirty
WARNING: multiple messages have this Message-ID (diff)
From: Sean Anderson <sean.anderson@seco.com>
To: Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
linux-phy@lists.infradead.org
Cc: Madalin Bucur <madalin.bucur@nxp.com>,
linuxppc-dev@lists.ozlabs.org, devicetree@vger.kernel.org,
Ioana Ciornei <ioana.ciornei@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Camelia Alexandra Groza <camelia.groza@nxp.com>,
linux-arm-kernel@lists.infradead.org,
Bagas Sanjaya <bagasdotme@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Sean Anderson <sean.anderson@seco.com>,
Li Yang <leoyang.li@nxp.com>, Shawn Guo <shawnguo@kernel.org>
Subject: [PATCH v10 08/13] phy: lynx10g: Enable by default on Layerscape
Date: Mon, 6 Mar 2023 14:15:30 -0500 [thread overview]
Message-ID: <20230306191535.1917656-9-sean.anderson@seco.com> (raw)
In-Reply-To: <20230306191535.1917656-1-sean.anderson@seco.com>
The next few patches will break ethernet if the serdes is not enabled,
so enable the serdes driver by default on Layerscape.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---
Changes in v10:
- New
drivers/phy/freescale/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
index 6bebe00f5889..b396162dc859 100644
--- a/drivers/phy/freescale/Kconfig
+++ b/drivers/phy/freescale/Kconfig
@@ -54,6 +54,7 @@ config PHY_FSL_LYNX_10G
depends on ARCH_LAYERSCAPE || PPC || COMPILE_TEST
select GENERIC_PHY
select REGMAP_MMIO
+ default y if ARCH_LAYERSCAPE
help
This adds support for the Lynx "SerDes" devices found on various QorIQ
SoCs. There may be up to four SerDes devices on each SoC, and each
--
2.35.1.1320.gc452695387.dirty
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: Sean Anderson <sean.anderson@seco.com>
To: Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
linux-phy@lists.infradead.org
Cc: Madalin Bucur <madalin.bucur@nxp.com>,
linuxppc-dev@lists.ozlabs.org, devicetree@vger.kernel.org,
Ioana Ciornei <ioana.ciornei@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Camelia Alexandra Groza <camelia.groza@nxp.com>,
linux-arm-kernel@lists.infradead.org,
Bagas Sanjaya <bagasdotme@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Sean Anderson <sean.anderson@seco.com>,
Li Yang <leoyang.li@nxp.com>, Shawn Guo <shawnguo@kernel.org>
Subject: [PATCH v10 08/13] phy: lynx10g: Enable by default on Layerscape
Date: Mon, 6 Mar 2023 14:15:30 -0500 [thread overview]
Message-ID: <20230306191535.1917656-9-sean.anderson@seco.com> (raw)
In-Reply-To: <20230306191535.1917656-1-sean.anderson@seco.com>
The next few patches will break ethernet if the serdes is not enabled,
so enable the serdes driver by default on Layerscape.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---
Changes in v10:
- New
drivers/phy/freescale/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
index 6bebe00f5889..b396162dc859 100644
--- a/drivers/phy/freescale/Kconfig
+++ b/drivers/phy/freescale/Kconfig
@@ -54,6 +54,7 @@ config PHY_FSL_LYNX_10G
depends on ARCH_LAYERSCAPE || PPC || COMPILE_TEST
select GENERIC_PHY
select REGMAP_MMIO
+ default y if ARCH_LAYERSCAPE
help
This adds support for the Lynx "SerDes" devices found on various QorIQ
SoCs. There may be up to four SerDes devices on each SoC, and each
--
2.35.1.1320.gc452695387.dirty
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Sean Anderson <sean.anderson@seco.com>
To: Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
linux-phy@lists.infradead.org
Cc: devicetree@vger.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Madalin Bucur <madalin.bucur@nxp.com>,
Sean Anderson <sean.anderson@seco.com>,
Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Camelia Alexandra Groza <camelia.groza@nxp.com>,
Bagas Sanjaya <bagasdotme@gmail.com>,
Ioana Ciornei <ioana.ciornei@nxp.com>,
linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v10 08/13] phy: lynx10g: Enable by default on Layerscape
Date: Mon, 6 Mar 2023 14:15:30 -0500 [thread overview]
Message-ID: <20230306191535.1917656-9-sean.anderson@seco.com> (raw)
In-Reply-To: <20230306191535.1917656-1-sean.anderson@seco.com>
The next few patches will break ethernet if the serdes is not enabled,
so enable the serdes driver by default on Layerscape.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---
Changes in v10:
- New
drivers/phy/freescale/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
index 6bebe00f5889..b396162dc859 100644
--- a/drivers/phy/freescale/Kconfig
+++ b/drivers/phy/freescale/Kconfig
@@ -54,6 +54,7 @@ config PHY_FSL_LYNX_10G
depends on ARCH_LAYERSCAPE || PPC || COMPILE_TEST
select GENERIC_PHY
select REGMAP_MMIO
+ default y if ARCH_LAYERSCAPE
help
This adds support for the Lynx "SerDes" devices found on various QorIQ
SoCs. There may be up to four SerDes devices on each SoC, and each
--
2.35.1.1320.gc452695387.dirty
next prev parent reply other threads:[~2023-03-06 19:16 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-06 19:15 [PATCH v10 00/13] phy: Add support for Lynx 10G SerDes Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` [PATCH v10 01/13] dt-bindings: phy: Add 2500BASE-X and 10GBASE-R Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` [PATCH v10 02/13] dt-bindings: phy: Add Lynx 10G phy binding Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-07 19:14 ` Sean Anderson
2023-03-07 19:14 ` Sean Anderson
2023-03-07 19:14 ` Sean Anderson
2023-03-07 19:14 ` Sean Anderson
2023-03-06 19:15 ` [PATCH v10 03/13] dt-bindings: Convert gpio-mmio to yaml Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 20:51 ` Jonas Gorski
2023-03-06 20:51 ` Jonas Gorski
2023-03-06 20:51 ` Jonas Gorski
2023-03-06 20:51 ` Jonas Gorski
2023-03-06 21:27 ` Sean Anderson
2023-03-06 21:27 ` Sean Anderson
2023-03-06 21:27 ` Sean Anderson
2023-03-06 21:27 ` Sean Anderson
2023-03-10 10:33 ` Jonas Gorski
2023-03-10 10:33 ` Jonas Gorski
2023-03-10 10:33 ` Jonas Gorski
2023-03-10 10:33 ` Jonas Gorski
2023-03-06 22:04 ` Linus Walleij
2023-03-06 22:04 ` Linus Walleij
2023-03-06 22:04 ` Linus Walleij
2023-03-06 22:04 ` Linus Walleij
2023-03-07 8:42 ` Krzysztof Kozlowski
2023-03-07 8:42 ` Krzysztof Kozlowski
2023-03-07 8:42 ` Krzysztof Kozlowski
2023-03-07 8:42 ` Krzysztof Kozlowski
2023-03-07 15:35 ` Sean Anderson
2023-03-07 15:35 ` Sean Anderson
2023-03-07 15:35 ` Sean Anderson
2023-03-07 15:35 ` Sean Anderson
2023-03-08 8:48 ` Krzysztof Kozlowski
2023-03-08 8:48 ` Krzysztof Kozlowski
2023-03-08 8:48 ` Krzysztof Kozlowski
2023-03-08 8:48 ` Krzysztof Kozlowski
2023-03-09 9:16 ` Linus Walleij
2023-03-09 9:16 ` Linus Walleij
2023-03-09 9:16 ` Linus Walleij
2023-03-09 9:16 ` Linus Walleij
2023-03-13 8:53 ` Leonard, Niall
2023-03-13 8:53 ` Leonard, Niall
2023-03-13 8:53 ` Leonard, Niall
2023-03-13 8:53 ` Leonard, Niall
2023-03-13 15:19 ` Sean Anderson
2023-03-13 15:19 ` Sean Anderson
2023-03-13 15:19 ` Sean Anderson
2023-03-13 15:19 ` Sean Anderson
2023-03-13 22:13 ` Linus Walleij
2023-03-13 22:13 ` Linus Walleij
2023-03-13 22:13 ` Linus Walleij
2023-03-13 22:13 ` Linus Walleij
2023-03-08 23:10 ` Rob Herring
2023-03-08 23:10 ` Rob Herring
2023-03-08 23:10 ` Rob Herring
2023-03-08 23:10 ` Rob Herring
2023-03-09 16:03 ` Sean Anderson
2023-03-09 16:03 ` Sean Anderson
2023-03-09 16:03 ` Sean Anderson
2023-03-09 16:03 ` Sean Anderson
2023-03-06 19:15 ` [PATCH v10 04/13] dt-bindings: gpio-mmio: Add compatible for QIXIS Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-08 23:11 ` Rob Herring
2023-03-08 23:11 ` Rob Herring
2023-03-08 23:11 ` Rob Herring
2023-03-08 23:11 ` Rob Herring
2023-03-06 19:15 ` [PATCH v10 05/13] dt-bindings: clock: Add ids for Lynx 10g PLLs Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` [PATCH v10 06/13] clk: Add Lynx 10G SerDes PLL driver Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` [PATCH v10 07/13] phy: fsl: Add Lynx 10G SerDes driver Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson [this message]
2023-03-06 19:15 ` [PATCH v10 08/13] phy: lynx10g: Enable by default on Layerscape Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` [PATCH v10 09/13] arm64: dts: ls1046a: Add serdes nodes Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` [PATCH v10 10/13] arm64: dts: ls1046ardb: Add serdes descriptions Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` [PATCH v10 11/13] arm64: dts: ls1088a: Add serdes nodes Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` [PATCH v10 12/13] arm64: dts: ls1088a: Prevent PCSs from probing as phys Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` [PATCH v10 13/13] arm64: dts: ls1088ardb: Add serdes descriptions Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
2023-03-06 19:15 ` Sean Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230306191535.1917656-9-sean.anderson@seco.com \
--to=sean.anderson@seco.com \
--cc=bagasdotme@gmail.com \
--cc=camelia.groza@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=ioana.ciornei@nxp.com \
--cc=kishon@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-phy@lists.infradead.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=madalin.bucur@nxp.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.