All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Rokosov <ddrokosov@sberdevices.ru>
To: <gregkh@linuxfoundation.org>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <neil.armstrong@linaro.org>,
	<khilman@baylibre.com>, <jbrunet@baylibre.com>,
	<martin.blumenstingl@googlemail.com>, <mturquette@baylibre.com>,
	<vkoul@kernel.org>, <kishon@kernel.org>, <hminas@synopsys.com>,
	<Thinh.Nguyen@synopsys.com>
Cc: <yue.wang@amlogic.com>, <hanjie.lin@amlogic.com>,
	<kernel@sberdevices.ru>, <rockosov@gmail.com>,
	<linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-amlogic@lists.infradead.org>,
	<linux-phy@lists.infradead.org>,
	Dmitry Rokosov <ddrokosov@sberdevices.ru>
Subject: [PATCH v2 0/5] arm64: meson: support Amlogic A1 USB OTG controller
Date: Tue, 18 Apr 2023 14:16:07 +0300	[thread overview]
Message-ID: <20230418111612.19479-1-ddrokosov@sberdevices.ru> (raw)

This patch series introduces full support for the Amlogic A1 USB controller
in OTG mode (peripheral and host modes switching).

Previously, Amlogic's patch series [1] was applied to the upstream tree,
but it only had USB host mode support.
Furthermore, the device tree patchset [2] wasn't merged due to a missing
clk driver.
Patchset [2] has been completely reworked:
    - changed register base offsets to proper values
    - introduced dwc2 in peripheral mode
    - OTG mode support
    - the SoB of Amlogic authors still remain

Testing:
    - USB OTG role switching between gadget and host - OK
    - Peripheral mode - OK (tested with adb shell/push/pop)
    - Host mode - OK (tested only USB enumeration and detection)

Changes v2 since v1 at [3]:
    - as Martin suggested in v1, this commit completely removes
      the 'otg_switch_supported' parameter from dwc3_meson_g12a_drvdata;
      this parameter is no longer necessary as all IP versions now
      support OTG switching
    - this commit moves the USB PHY clkin enable/disable calls to
      the PHY init/exit routines

Links:
    [1] https://lore.kernel.org/all/1581990859-135234-1-git-send-email-hanjie.lin@amlogic.com/
    [2] https://lore.kernel.org/all/1581990859-135234-4-git-send-email-hanjie.lin@amlogic.com/
    [3] https://lore.kernel.org/all/20230414152423.19842-1-ddrokosov@sberdevices.ru/

Dmitry Rokosov (5):
  phy: amlogic: enable/disable clkin during Amlogic USB PHY init/exit
  usb: dwc2: support dwc2 IP for Amlogic A1 SoC family
  dt-bindings: usb: dwc2: add support for Amlogic A1 SoC USB peripheral
  usb: dwc3-meson-g12a: support OTG switch for all IP versions
  arm64: dts: meson: a1: support USB controller in OTG mode

 .../devicetree/bindings/usb/dwc2.yaml         |  1 +
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi     | 59 +++++++++++++++++++
 drivers/phy/amlogic/phy-meson-g12a-usb2.c     | 13 +++-
 drivers/usb/dwc2/params.c                     | 21 +++++++
 drivers/usb/dwc3/dwc3-meson-g12a.c            | 16 +----
 5 files changed, 95 insertions(+), 15 deletions(-)

-- 
2.36.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Rokosov <ddrokosov@sberdevices.ru>
To: <gregkh@linuxfoundation.org>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <neil.armstrong@linaro.org>,
	<khilman@baylibre.com>, <jbrunet@baylibre.com>,
	<martin.blumenstingl@googlemail.com>, <mturquette@baylibre.com>,
	<vkoul@kernel.org>, <kishon@kernel.org>, <hminas@synopsys.com>,
	<Thinh.Nguyen@synopsys.com>
Cc: <yue.wang@amlogic.com>, <hanjie.lin@amlogic.com>,
	<kernel@sberdevices.ru>, <rockosov@gmail.com>,
	<linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-amlogic@lists.infradead.org>,
	<linux-phy@lists.infradead.org>,
	Dmitry Rokosov <ddrokosov@sberdevices.ru>
Subject: [PATCH v2 0/5] arm64: meson: support Amlogic A1 USB OTG controller
Date: Tue, 18 Apr 2023 14:16:07 +0300	[thread overview]
Message-ID: <20230418111612.19479-1-ddrokosov@sberdevices.ru> (raw)

This patch series introduces full support for the Amlogic A1 USB controller
in OTG mode (peripheral and host modes switching).

Previously, Amlogic's patch series [1] was applied to the upstream tree,
but it only had USB host mode support.
Furthermore, the device tree patchset [2] wasn't merged due to a missing
clk driver.
Patchset [2] has been completely reworked:
    - changed register base offsets to proper values
    - introduced dwc2 in peripheral mode
    - OTG mode support
    - the SoB of Amlogic authors still remain

Testing:
    - USB OTG role switching between gadget and host - OK
    - Peripheral mode - OK (tested with adb shell/push/pop)
    - Host mode - OK (tested only USB enumeration and detection)

Changes v2 since v1 at [3]:
    - as Martin suggested in v1, this commit completely removes
      the 'otg_switch_supported' parameter from dwc3_meson_g12a_drvdata;
      this parameter is no longer necessary as all IP versions now
      support OTG switching
    - this commit moves the USB PHY clkin enable/disable calls to
      the PHY init/exit routines

Links:
    [1] https://lore.kernel.org/all/1581990859-135234-1-git-send-email-hanjie.lin@amlogic.com/
    [2] https://lore.kernel.org/all/1581990859-135234-4-git-send-email-hanjie.lin@amlogic.com/
    [3] https://lore.kernel.org/all/20230414152423.19842-1-ddrokosov@sberdevices.ru/

Dmitry Rokosov (5):
  phy: amlogic: enable/disable clkin during Amlogic USB PHY init/exit
  usb: dwc2: support dwc2 IP for Amlogic A1 SoC family
  dt-bindings: usb: dwc2: add support for Amlogic A1 SoC USB peripheral
  usb: dwc3-meson-g12a: support OTG switch for all IP versions
  arm64: dts: meson: a1: support USB controller in OTG mode

 .../devicetree/bindings/usb/dwc2.yaml         |  1 +
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi     | 59 +++++++++++++++++++
 drivers/phy/amlogic/phy-meson-g12a-usb2.c     | 13 +++-
 drivers/usb/dwc2/params.c                     | 21 +++++++
 drivers/usb/dwc3/dwc3-meson-g12a.c            | 16 +----
 5 files changed, 95 insertions(+), 15 deletions(-)

-- 
2.36.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Rokosov <ddrokosov@sberdevices.ru>
To: <gregkh@linuxfoundation.org>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <neil.armstrong@linaro.org>,
	<khilman@baylibre.com>, <jbrunet@baylibre.com>,
	<martin.blumenstingl@googlemail.com>, <mturquette@baylibre.com>,
	<vkoul@kernel.org>, <kishon@kernel.org>, <hminas@synopsys.com>,
	<Thinh.Nguyen@synopsys.com>
Cc: <yue.wang@amlogic.com>, <hanjie.lin@amlogic.com>,
	<kernel@sberdevices.ru>, <rockosov@gmail.com>,
	<linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-amlogic@lists.infradead.org>,
	<linux-phy@lists.infradead.org>,
	Dmitry Rokosov <ddrokosov@sberdevices.ru>
Subject: [PATCH v2 0/5] arm64: meson: support Amlogic A1 USB OTG controller
Date: Tue, 18 Apr 2023 14:16:07 +0300	[thread overview]
Message-ID: <20230418111612.19479-1-ddrokosov@sberdevices.ru> (raw)

This patch series introduces full support for the Amlogic A1 USB controller
in OTG mode (peripheral and host modes switching).

Previously, Amlogic's patch series [1] was applied to the upstream tree,
but it only had USB host mode support.
Furthermore, the device tree patchset [2] wasn't merged due to a missing
clk driver.
Patchset [2] has been completely reworked:
    - changed register base offsets to proper values
    - introduced dwc2 in peripheral mode
    - OTG mode support
    - the SoB of Amlogic authors still remain

Testing:
    - USB OTG role switching between gadget and host - OK
    - Peripheral mode - OK (tested with adb shell/push/pop)
    - Host mode - OK (tested only USB enumeration and detection)

Changes v2 since v1 at [3]:
    - as Martin suggested in v1, this commit completely removes
      the 'otg_switch_supported' parameter from dwc3_meson_g12a_drvdata;
      this parameter is no longer necessary as all IP versions now
      support OTG switching
    - this commit moves the USB PHY clkin enable/disable calls to
      the PHY init/exit routines

Links:
    [1] https://lore.kernel.org/all/1581990859-135234-1-git-send-email-hanjie.lin@amlogic.com/
    [2] https://lore.kernel.org/all/1581990859-135234-4-git-send-email-hanjie.lin@amlogic.com/
    [3] https://lore.kernel.org/all/20230414152423.19842-1-ddrokosov@sberdevices.ru/

Dmitry Rokosov (5):
  phy: amlogic: enable/disable clkin during Amlogic USB PHY init/exit
  usb: dwc2: support dwc2 IP for Amlogic A1 SoC family
  dt-bindings: usb: dwc2: add support for Amlogic A1 SoC USB peripheral
  usb: dwc3-meson-g12a: support OTG switch for all IP versions
  arm64: dts: meson: a1: support USB controller in OTG mode

 .../devicetree/bindings/usb/dwc2.yaml         |  1 +
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi     | 59 +++++++++++++++++++
 drivers/phy/amlogic/phy-meson-g12a-usb2.c     | 13 +++-
 drivers/usb/dwc2/params.c                     | 21 +++++++
 drivers/usb/dwc3/dwc3-meson-g12a.c            | 16 +----
 5 files changed, 95 insertions(+), 15 deletions(-)

-- 
2.36.0


WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Rokosov <ddrokosov@sberdevices.ru>
To: <gregkh@linuxfoundation.org>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <neil.armstrong@linaro.org>,
	<khilman@baylibre.com>, <jbrunet@baylibre.com>,
	<martin.blumenstingl@googlemail.com>, <mturquette@baylibre.com>,
	<vkoul@kernel.org>, <kishon@kernel.org>, <hminas@synopsys.com>,
	<Thinh.Nguyen@synopsys.com>
Cc: <yue.wang@amlogic.com>, <hanjie.lin@amlogic.com>,
	<kernel@sberdevices.ru>, <rockosov@gmail.com>,
	<linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-amlogic@lists.infradead.org>,
	<linux-phy@lists.infradead.org>,
	Dmitry Rokosov <ddrokosov@sberdevices.ru>
Subject: [PATCH v2 0/5] arm64: meson: support Amlogic A1 USB OTG controller
Date: Tue, 18 Apr 2023 14:16:07 +0300	[thread overview]
Message-ID: <20230418111612.19479-1-ddrokosov@sberdevices.ru> (raw)

This patch series introduces full support for the Amlogic A1 USB controller
in OTG mode (peripheral and host modes switching).

Previously, Amlogic's patch series [1] was applied to the upstream tree,
but it only had USB host mode support.
Furthermore, the device tree patchset [2] wasn't merged due to a missing
clk driver.
Patchset [2] has been completely reworked:
    - changed register base offsets to proper values
    - introduced dwc2 in peripheral mode
    - OTG mode support
    - the SoB of Amlogic authors still remain

Testing:
    - USB OTG role switching between gadget and host - OK
    - Peripheral mode - OK (tested with adb shell/push/pop)
    - Host mode - OK (tested only USB enumeration and detection)

Changes v2 since v1 at [3]:
    - as Martin suggested in v1, this commit completely removes
      the 'otg_switch_supported' parameter from dwc3_meson_g12a_drvdata;
      this parameter is no longer necessary as all IP versions now
      support OTG switching
    - this commit moves the USB PHY clkin enable/disable calls to
      the PHY init/exit routines

Links:
    [1] https://lore.kernel.org/all/1581990859-135234-1-git-send-email-hanjie.lin@amlogic.com/
    [2] https://lore.kernel.org/all/1581990859-135234-4-git-send-email-hanjie.lin@amlogic.com/
    [3] https://lore.kernel.org/all/20230414152423.19842-1-ddrokosov@sberdevices.ru/

Dmitry Rokosov (5):
  phy: amlogic: enable/disable clkin during Amlogic USB PHY init/exit
  usb: dwc2: support dwc2 IP for Amlogic A1 SoC family
  dt-bindings: usb: dwc2: add support for Amlogic A1 SoC USB peripheral
  usb: dwc3-meson-g12a: support OTG switch for all IP versions
  arm64: dts: meson: a1: support USB controller in OTG mode

 .../devicetree/bindings/usb/dwc2.yaml         |  1 +
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi     | 59 +++++++++++++++++++
 drivers/phy/amlogic/phy-meson-g12a-usb2.c     | 13 +++-
 drivers/usb/dwc2/params.c                     | 21 +++++++
 drivers/usb/dwc3/dwc3-meson-g12a.c            | 16 +----
 5 files changed, 95 insertions(+), 15 deletions(-)

-- 
2.36.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2023-04-18 11:16 UTC|newest]

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-18 11:16 Dmitry Rokosov [this message]
2023-04-18 11:16 ` [PATCH v2 0/5] arm64: meson: support Amlogic A1 USB OTG controller Dmitry Rokosov
2023-04-18 11:16 ` Dmitry Rokosov
2023-04-18 11:16 ` Dmitry Rokosov
2023-04-18 11:16 ` [PATCH v2 1/5] phy: amlogic: enable/disable clkin during Amlogic USB PHY init/exit Dmitry Rokosov
2023-04-18 11:16   ` Dmitry Rokosov
2023-04-18 11:16   ` Dmitry Rokosov
2023-04-18 11:16   ` Dmitry Rokosov
2023-04-18 11:42   ` neil.armstrong
2023-04-18 11:42     ` neil.armstrong
2023-04-18 11:42     ` neil.armstrong
2023-04-18 11:42     ` neil.armstrong
2023-04-23 17:42   ` Martin Blumenstingl
2023-04-23 17:42     ` Martin Blumenstingl
2023-04-23 17:42     ` Martin Blumenstingl
2023-04-23 17:42     ` Martin Blumenstingl
2023-04-25 10:29     ` Dmitry Rokosov
2023-04-25 10:29       ` Dmitry Rokosov
2023-04-25 10:29       ` Dmitry Rokosov
2023-04-25 10:29       ` Dmitry Rokosov
2023-04-18 11:16 ` [PATCH v2 2/5] usb: dwc2: support dwc2 IP for Amlogic A1 SoC family Dmitry Rokosov
2023-04-18 11:16   ` Dmitry Rokosov
2023-04-18 11:16   ` Dmitry Rokosov
2023-04-18 11:16   ` Dmitry Rokosov
2023-04-18 11:42   ` neil.armstrong
2023-04-18 11:42     ` neil.armstrong
2023-04-18 11:42     ` neil.armstrong
2023-04-18 11:42     ` neil.armstrong
2023-04-21  4:51   ` Minas Harutyunyan
2023-04-21  4:51     ` Minas Harutyunyan
2023-04-21  4:51     ` Minas Harutyunyan
2023-04-21  4:51     ` Minas Harutyunyan
2023-04-18 11:16 ` [PATCH v2 3/5] dt-bindings: usb: dwc2: add support for Amlogic A1 SoC USB peripheral Dmitry Rokosov
2023-04-18 11:16   ` Dmitry Rokosov
2023-04-18 11:16   ` Dmitry Rokosov
2023-04-18 11:16   ` Dmitry Rokosov
2023-04-21 18:01   ` Rob Herring
2023-04-21 18:01     ` Rob Herring
2023-04-21 18:01     ` Rob Herring
2023-04-21 18:01     ` Rob Herring
2023-04-23 17:43   ` Martin Blumenstingl
2023-04-23 17:43     ` Martin Blumenstingl
2023-04-23 17:43     ` Martin Blumenstingl
2023-04-23 17:43     ` Martin Blumenstingl
2023-04-18 11:16 ` [PATCH v2 4/5] usb: dwc3-meson-g12a: support OTG switch for all IP versions Dmitry Rokosov
2023-04-18 11:16   ` Dmitry Rokosov
2023-04-18 11:16   ` Dmitry Rokosov
2023-04-18 11:16   ` Dmitry Rokosov
2023-04-18 11:42   ` neil.armstrong
2023-04-18 11:42     ` neil.armstrong
2023-04-18 11:42     ` neil.armstrong
2023-04-18 11:42     ` neil.armstrong
2023-04-23 17:44   ` Martin Blumenstingl
2023-04-23 17:44     ` Martin Blumenstingl
2023-04-23 17:44     ` Martin Blumenstingl
2023-04-23 17:44     ` Martin Blumenstingl
2023-04-18 11:16 ` [PATCH v2 5/5] arm64: dts: meson: a1: support USB controller in OTG mode Dmitry Rokosov
2023-04-18 11:16   ` Dmitry Rokosov
2023-04-18 11:16   ` Dmitry Rokosov
2023-04-18 11:16   ` Dmitry Rokosov
2023-04-23 17:51   ` Martin Blumenstingl
2023-04-23 17:51     ` Martin Blumenstingl
2023-04-23 17:51     ` Martin Blumenstingl
2023-04-23 17:51     ` Martin Blumenstingl
2023-04-25 11:06     ` Dmitry Rokosov
2023-04-25 11:06       ` Dmitry Rokosov
2023-04-25 11:06       ` Dmitry Rokosov
2023-04-25 11:06       ` Dmitry Rokosov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230418111612.19479-1-ddrokosov@sberdevices.ru \
    --to=ddrokosov@sberdevices.ru \
    --cc=Thinh.Nguyen@synopsys.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=hanjie.lin@amlogic.com \
    --cc=hminas@synopsys.com \
    --cc=jbrunet@baylibre.com \
    --cc=kernel@sberdevices.ru \
    --cc=khilman@baylibre.com \
    --cc=kishon@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=mturquette@baylibre.com \
    --cc=neil.armstrong@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=rockosov@gmail.com \
    --cc=vkoul@kernel.org \
    --cc=yue.wang@amlogic.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.