* [PATCH v1 1/5] arm64: dts: qcom: sa8775p: add the QUPv3 #0 and #3 node
2023-05-26 13:31 [PATCH v1 0/5] dts: qcom: sa8775p: add missing qup id's, i2c, Shazad Hussain
@ 2023-05-26 13:31 ` Shazad Hussain
2023-05-26 13:31 ` [PATCH v1 2/5] arm64: dts: qcom: sa8775p: add missing i2c nodes Shazad Hussain
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Shazad Hussain @ 2023-05-26 13:31 UTC (permalink / raw)
To: agross, andersson, robh+dt, krzysztof.kozlowski+dt, conor+dt
Cc: konrad.dybcio, Shazad Hussain, linux-arm-msm, devicetree, linux-kernel
Add zeroth and third instance of the QUPv3 engine to the sa8775p.dtsi.
Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index fbe98ff1bcf8..27af8386a3f8 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -568,6 +568,19 @@
};
};
+ qupv3_id_0: geniqup@9c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0x9c0000 0x0 0x6000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ iommus = <&apps_smmu 0x403 0x0>;
+ status = "disabled";
+ };
+
qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00ac0000 0x0 0x6000>;
@@ -612,6 +625,19 @@
};
};
+ qupv3_id_3: geniqup@bc0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0xbc0000 0x0 0x6000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_3_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_3_S_AHB_CLK>;
+ iommus = <&apps_smmu 0x43 0x0>;
+ status = "disabled";
+ };
+
ufs_mem_hc: ufs@1d84000 {
compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
reg = <0x0 0x01d84000 0x0 0x3000>;
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v1 2/5] arm64: dts: qcom: sa8775p: add missing i2c nodes
2023-05-26 13:31 [PATCH v1 0/5] dts: qcom: sa8775p: add missing qup id's, i2c, Shazad Hussain
2023-05-26 13:31 ` [PATCH v1 1/5] arm64: dts: qcom: sa8775p: add the QUPv3 #0 and #3 node Shazad Hussain
@ 2023-05-26 13:31 ` Shazad Hussain
2023-05-26 13:31 ` [PATCH v1 3/5] arm64: dts: qcom: sa8775p: add missing spi nodes Shazad Hussain
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Shazad Hussain @ 2023-05-26 13:31 UTC (permalink / raw)
To: agross, andersson, robh+dt, krzysztof.kozlowski+dt, conor+dt
Cc: konrad.dybcio, Shazad Hussain, linux-arm-msm, devicetree, linux-kernel
Add the missing nodes for the i2c buses present on sa8775p Soc.
Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 420 ++++++++++++++++++++++++++
1 file changed, 420 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 27af8386a3f8..abcd6b17b8d1 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -510,6 +510,69 @@
#size-cells = <2>;
status = "disabled";
+ i2c14: i2c@880000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x880000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
+ i2c15: i2c@884000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x884000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
+ i2c16: i2c@888000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x888000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
spi16: spi@888000 {
compatible = "qcom,geni-spi";
reg = <0x0 0x00888000 0x0 0x4000>;
@@ -531,6 +594,27 @@
status = "disabled";
};
+ i2c17: i2c@88c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x88c000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
uart17: serial@88c000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x0088c000 0x0 0x4000>;
@@ -566,6 +650,48 @@
#size-cells = <0>;
status = "disabled";
};
+
+ i2c19: i2c@894000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x894000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
+ i2c20: i2c@898000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x898000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
};
qupv3_id_0: geniqup@9c0000 {
@@ -579,6 +705,132 @@
<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
iommus = <&apps_smmu 0x403 0x0>;
status = "disabled";
+
+ i2c0: i2c@980000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x980000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@984000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x984000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@988000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x988000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@98c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x98c000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@990000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x990000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@994000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x994000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
};
qupv3_id_1: geniqup@ac0000 {
@@ -593,6 +845,90 @@
iommus = <&apps_smmu 0x443 0x0>;
status = "disabled";
+ i2c7: i2c@a80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa80000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@a84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa84000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
+ i2c9: i2c@a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa88000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
+ i2c10: i2c@a8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa8c000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
uart10: serial@a8c000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x00a8c000 0x0 0x4000>;
@@ -609,6 +945,48 @@
status = "disabled";
};
+ i2c11: i2c@a90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa90000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
+ i2c12: i2c@a94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa94000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
uart12: serial@a94000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x00a94000 0x0 0x4000>;
@@ -623,6 +1001,27 @@
power-domains = <&rpmhpd SA8775P_CX>;
status = "disabled";
};
+
+ i2c13: i2c@a98000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa98000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
};
qupv3_id_3: geniqup@bc0000 {
@@ -636,6 +1035,27 @@
<&gcc GCC_QUPV3_WRAP_3_S_AHB_CLK>;
iommus = <&apps_smmu 0x43 0x0>;
status = "disabled";
+
+ i2c21: i2c@b80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xb80000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
};
ufs_mem_hc: ufs@1d84000 {
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v1 3/5] arm64: dts: qcom: sa8775p: add missing spi nodes
2023-05-26 13:31 [PATCH v1 0/5] dts: qcom: sa8775p: add missing qup id's, i2c, Shazad Hussain
2023-05-26 13:31 ` [PATCH v1 1/5] arm64: dts: qcom: sa8775p: add the QUPv3 #0 and #3 node Shazad Hussain
2023-05-26 13:31 ` [PATCH v1 2/5] arm64: dts: qcom: sa8775p: add missing i2c nodes Shazad Hussain
@ 2023-05-26 13:31 ` Shazad Hussain
2023-05-26 13:31 ` [PATCH v1 4/5] arm64: dts: qcom: sa8775p: add uart5 and uart9 nodes Shazad Hussain
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Shazad Hussain @ 2023-05-26 13:31 UTC (permalink / raw)
To: agross, andersson, robh+dt, krzysztof.kozlowski+dt, conor+dt
Cc: konrad.dybcio, Shazad Hussain, linux-arm-msm, devicetree, linux-kernel
Add the missing nodes of the SPI buses present on sa8775p platform.
Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 399 ++++++++++++++++++++++++++
1 file changed, 399 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index abcd6b17b8d1..5c7b838d239a 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -531,6 +531,27 @@
status = "disabled";
};
+ spi14: spi@880000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x880000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
i2c15: i2c@884000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x884000 0x0 0x4000>;
@@ -552,6 +573,27 @@
status = "disabled";
};
+ spi15: spi@884000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x884000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
i2c16: i2c@888000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x888000 0x0 0x4000>;
@@ -615,6 +657,27 @@
status = "disabled";
};
+ spi17: spi@88c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x88c000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
uart17: serial@88c000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x0088c000 0x0 0x4000>;
@@ -651,6 +714,27 @@
status = "disabled";
};
+ spi18: spi@890000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x890000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
i2c19: i2c@894000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x894000 0x0 0x4000>;
@@ -672,6 +756,27 @@
status = "disabled";
};
+ spi19: spi@894000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x894000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
i2c20: i2c@898000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x898000 0x0 0x4000>;
@@ -692,6 +797,27 @@
power-domains = <&rpmhpd SA8775P_CX>;
status = "disabled";
};
+
+ spi20: spi@898000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x898000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
};
qupv3_id_0: geniqup@9c0000 {
@@ -727,6 +853,27 @@
status = "disabled";
};
+ spi0: spi@980000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x980000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
i2c1: i2c@984000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x984000 0x0 0x4000>;
@@ -748,6 +895,27 @@
status = "disabled";
};
+ spi1: spi@984000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x984000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
i2c2: i2c@988000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x988000 0x0 0x4000>;
@@ -769,6 +937,27 @@
status = "disabled";
};
+ spi2: spi@988000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x988000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
i2c3: i2c@98c000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x98c000 0x0 0x4000>;
@@ -790,6 +979,27 @@
status = "disabled";
};
+ spi3: spi@98c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x98c000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
i2c4: i2c@990000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x990000 0x0 0x4000>;
@@ -811,6 +1021,27 @@
status = "disabled";
};
+ spi4: spi@990000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x990000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
i2c5: i2c@994000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x994000 0x0 0x4000>;
@@ -831,6 +1062,27 @@
power-domains = <&rpmhpd SA8775P_CX>;
status = "disabled";
};
+
+ spi5: spi@994000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x994000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
};
qupv3_id_1: geniqup@ac0000 {
@@ -866,6 +1118,27 @@
status = "disabled";
};
+ spi7: spi@a80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0xa80000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
i2c8: i2c@a84000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0xa84000 0x0 0x4000>;
@@ -887,6 +1160,27 @@
status = "disabled";
};
+ spi8: spi@a84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0xa84000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
i2c9: i2c@a88000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0xa88000 0x0 0x4000>;
@@ -908,6 +1202,27 @@
status = "disabled";
};
+ spi9: spi@a88000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0xa88000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
i2c10: i2c@a8c000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0xa8c000 0x0 0x4000>;
@@ -929,6 +1244,27 @@
status = "disabled";
};
+ spi10: spi@a8c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0xa8c000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
uart10: serial@a8c000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x00a8c000 0x0 0x4000>;
@@ -966,6 +1302,27 @@
status = "disabled";
};
+ spi11: spi@a90000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0xa90000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
i2c12: i2c@a94000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0xa94000 0x0 0x4000>;
@@ -987,6 +1344,27 @@
status = "disabled";
};
+ spi12: spi@a94000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0xa94000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
uart12: serial@a94000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x00a94000 0x0 0x4000>;
@@ -1056,6 +1434,27 @@
power-domains = <&rpmhpd SA8775P_CX>;
status = "disabled";
};
+
+ spi21: spi@b80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0xb80000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
};
ufs_mem_hc: ufs@1d84000 {
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v1 4/5] arm64: dts: qcom: sa8775p: add uart5 and uart9 nodes
2023-05-26 13:31 [PATCH v1 0/5] dts: qcom: sa8775p: add missing qup id's, i2c, Shazad Hussain
` (2 preceding siblings ...)
2023-05-26 13:31 ` [PATCH v1 3/5] arm64: dts: qcom: sa8775p: add missing spi nodes Shazad Hussain
@ 2023-05-26 13:31 ` Shazad Hussain
2023-05-26 13:31 ` [PATCH v1 5/5] arm64: dts: qcom: sa8775p-ride: enable i2c11 Shazad Hussain
2023-05-27 4:00 ` [PATCH v1 0/5] dts: qcom: sa8775p: add missing qup id's, i2c, Bjorn Andersson
5 siblings, 0 replies; 7+ messages in thread
From: Shazad Hussain @ 2023-05-26 13:31 UTC (permalink / raw)
To: agross, andersson, robh+dt, krzysztof.kozlowski+dt, conor+dt
Cc: konrad.dybcio, Shazad Hussain, linux-arm-msm, devicetree, linux-kernel
Add remaining uart5 and uart9 nodes for UART bus present on sa8775p
SoC.
Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 30 +++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 5c7b838d239a..b130136acffe 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -1083,6 +1083,21 @@
power-domains = <&rpmhpd SA8775P_CX>;
status = "disabled";
};
+
+ uart5: serial@994000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0x994000 0x0 0x4000>;
+ interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
};
qupv3_id_1: geniqup@ac0000 {
@@ -1223,6 +1238,21 @@
status = "disabled";
};
+ uart9: serial@a88000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0xa88000 0x0 0x4000>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core", "qup-config";
+ power-domains = <&rpmhpd SA8775P_CX>;
+ status = "disabled";
+ };
+
i2c10: i2c@a8c000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0xa8c000 0x0 0x4000>;
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v1 5/5] arm64: dts: qcom: sa8775p-ride: enable i2c11
2023-05-26 13:31 [PATCH v1 0/5] dts: qcom: sa8775p: add missing qup id's, i2c, Shazad Hussain
` (3 preceding siblings ...)
2023-05-26 13:31 ` [PATCH v1 4/5] arm64: dts: qcom: sa8775p: add uart5 and uart9 nodes Shazad Hussain
@ 2023-05-26 13:31 ` Shazad Hussain
2023-05-27 4:00 ` [PATCH v1 0/5] dts: qcom: sa8775p: add missing qup id's, i2c, Bjorn Andersson
5 siblings, 0 replies; 7+ messages in thread
From: Shazad Hussain @ 2023-05-26 13:31 UTC (permalink / raw)
To: agross, andersson, robh+dt, krzysztof.kozlowski+dt, conor+dt
Cc: konrad.dybcio, Shazad Hussain, linux-arm-msm, devicetree, linux-kernel
This enables the i2c11 node on sa8775p-ride board for A2B controller
and audio port expander.
Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
---
arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 4c000a5cb3c4..ab767cfa51ff 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -19,6 +19,7 @@
serial0 = &uart10;
serial1 = &uart12;
serial2 = &uart17;
+ i2c11 = &i2c11;
i2c18 = &i2c18;
spi16 = &spi16;
ufshc1 = &ufs_mem_hc;
@@ -260,6 +261,13 @@
};
};
+&i2c11 {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&qup_i2c11_default>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&i2c18 {
clock-frequency = <400000>;
pinctrl-0 = <&qup_i2c18_default>;
@@ -370,6 +378,13 @@
bias-disable;
};
+ qup_i2c11_default: qup-i2c11-state {
+ pins = "gpio48", "gpio49";
+ function = "qup1_se4";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
qup_i2c18_default: qup-i2c18-state {
pins = "gpio95", "gpio96";
function = "qup2_se4";
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH v1 0/5] dts: qcom: sa8775p: add missing qup id's, i2c,
2023-05-26 13:31 [PATCH v1 0/5] dts: qcom: sa8775p: add missing qup id's, i2c, Shazad Hussain
` (4 preceding siblings ...)
2023-05-26 13:31 ` [PATCH v1 5/5] arm64: dts: qcom: sa8775p-ride: enable i2c11 Shazad Hussain
@ 2023-05-27 4:00 ` Bjorn Andersson
5 siblings, 0 replies; 7+ messages in thread
From: Bjorn Andersson @ 2023-05-27 4:00 UTC (permalink / raw)
To: conor+dt, robh+dt, Shazad Hussain, agross, krzysztof.kozlowski+dt
Cc: devicetree, linux-kernel, linux-arm-msm, konrad.dybcio
On Fri, 26 May 2023 19:01:16 +0530, Shazad Hussain wrote:
> This patch series adds the qupv3_id_0, qupv3_id_3, i2c, spi and uart
> nodes that are missing on the sa8775p platform.
>
> i2c11 is enabled for A2B controller and audio port expander.
>
> Shazad Hussain (5):
> arm64: dts: qcom: sa8775p: add the QUPv3 #0 and #3 node
> arm64: dts: qcom: sa8775p: add missing i2c nodes
> arm64: dts: qcom: sa8775p: add missing spi nodes
> arm64: dts: qcom: sa8775p: add uart5 and uart9 nodes
> arm64: dts: qcom: sa8775p-ride: enable i2c11
>
> [...]
Applied, thanks!
[1/5] arm64: dts: qcom: sa8775p: add the QUPv3 #0 and #3 node
commit: 07e3e17205794c8df6b55c65117ca6a6502a37d7
[2/5] arm64: dts: qcom: sa8775p: add missing i2c nodes
commit: ee2f5f906d69d96350c2b59fddef75a76d23e877
[3/5] arm64: dts: qcom: sa8775p: add missing spi nodes
commit: 1b2d7ad5ac14df4657e629a0b681fd966d43a74e
[4/5] arm64: dts: qcom: sa8775p: add uart5 and uart9 nodes
commit: 445a523d462432dd9001c899e2c3ced60d23994b
[5/5] arm64: dts: qcom: sa8775p-ride: enable i2c11
commit: a1f6bef21355da77101eca1a35c30408ad74ef67
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 7+ messages in thread